[SOLVED] libkmod: kmod_config_parse errors

Hi,
I have some errors with /etc/modprobe.d/ndiswrapper.conf at boot
libkmod: kmod_config_parse: /etc/modprobe.d/ndiswrapper.conf line 1: ignoring bad line starting with 'ndiswrapper'
libkmod: kmod_config_parse: /etc/modprobe.d/ndiswrapper.conf line 2: ignoring bad line starting with 'depmod'
module configuration already contains alias directive
3. Write configuration file in /etc/modprobe.d/ndiswrapper.conf
ndiswrapper -m
depmod -a
Wireless_Setup#ndiswrapper
How to resolve it?
Thanks for your help.
Last edited by cassyb (2013-11-03 00:55:18)

I thought that
ndiswrapper -m
depmod -a
was the content of /etc/modprobe.d/ndiswrapper.conf not the commands to generate it.
I delete these 2 bad lines and
mkinitcpio -p linux
resolves my problem.
Thanks.

Similar Messages

HOW TO SOLVE THE R6034 ERROR IN ITUNES INSTALATION

I need toknow how to solve the R6034 error in itunes instalation becouse y can´t buk up muy phone

How to solve this ?
#import <UIKit/UIKit.h>
int main(int argc, char *argv[]) {
    NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
   -> int retVal = UIApplicationMain(argc, argv, nil, nil);
    [pool release];
    return retVal;

How i can solve 6753 airport error

how i can solve 6753 airport error?

IIRC, it's not uncommon to spot this after a firmware update to 7.6.1. And IIRC, wasn't there a 7.6.2 release today? Unplug the express, plug it back in, and generally this should self-resolve.

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

How to solve the 404 error

Hi,
How to catch or solve the 404 error in application.
Some time we are giving some file name but that file is not avialable at that time it will give 404 error. how to avoid this error.
If 404 error comes i want call some other file. Is it posible.
Thanks Advance.

Yes, this is because IE 5.5 (?) and higher have this wacky "Show friendly HTTP error messages" setting. You can disable this by going to tools -> internet options -> advanced and unchecking "Show friendly HTTP error messages". However as the default IE setting has "Show friendly HTTP error messages" enabled this isn't a good solution.
I believe that if your error page is less than a certain size (in bytes) then IE defaults to it's own error page when "Show friendly HTTP error messages" are enabled. This size is something like 512 bytes or fewer in length.
So basically try making your error page larger (more than 512 bytes in size) and see if that works.

"Error 16" solution doesn't solve problem, same error message pops up. Further steps?

Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16. Stumped!

Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
situation, I¹m afraid. I think I¹m going to have to start with a new drive
and import/update until I find the source of this issue.
Jim
"Error 16" solution doesn't solve problem, same error message pops up.
Further steps?
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop
General Discussion - View the full discussion
<https://forums.adobe.com/message/7154907#7154907>
Permissions problem. Open Terminal and copy/paste this line: sudo chmod -R
777 /Library/Application\ Support/Adobe Gene
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7154907#7154907 and clicking Correct¹ below
the answer Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in your
message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Photoshop General
Discussion by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=4694> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.
>

HT201405 how to solve time machine error-1

how to solve time machine error-1

I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked!

TS3297 How to solve -42110 unknown error?

Please, how can I solve -42110 unknown error?
Thanks

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

HT201210 pls solve my problem error 3194

pls solve my problem error 3194

Hello,
Check this:
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Hope it helps,

HT203200 How can i solve the -50 error when downloading video from itunes??

How can I solve the -50 error when downloading video from itunes. The apple support people cannot even figure it out!??

The 2330 error often means some sort of damage to the filing system as might happen if the battery fell out while the disk was in use.
Try running a disk check to see if it finds and fixes any errors.
http://support.microsoft.com/?kbid=315265

How do i find locked music files to solve my -54 error for windows 8

everytime my itunes starts up, it comes up with " the ipod could not be synced, an unknown error occured (-54)", i've read that people find the locked files in their library and unlock them and it solves the problem, but i wanted to know how i find the files for a windows 8 pc?

Maybe:
https://answers.yahoo.com/question/index?qid=20090723091425AAM63Zz

[SOLVED] lib32-libgpg-error and lib32-libgcrypt no longer working

The Dell 1320c printer requires a workaround of using it with a FujiXerox DocuPrint C525a driver, which only exists for 32bit systems. In order to get it running, you need to manually copy the files to the proper locations. With the new upgrade on both of those packages (lib32-libgpg-error and lib32-libgcrypt) the filter file /usr/lib/cups/filters/FXM_PF no longer runs, and complains about "wrong ELFCLASS64", which I take it to mean it's not recognizing/finding the lib32 packages. I've since downgraded and added the packages to the IgnorePkg array in pacman.conf, but I wanted to point it out to anyone who may have the same issue, or in case it was an error with the generation of the packages. Or is there simply a dependency that hasn't yet been updated?
*EDIT* Thanks to Wonder for fixing it (or letting us know it was fixed)!
Last edited by lswest (2010-06-02 20:14:43)

Kirurgs wrote:Exactly the same error with Lotus Notes. Dowgrading package solves the problem.
New packages are couple of bytes in size, which is waaaay smaller than previous versions.
Smart thinking, I didn't think to check the size of the packages. Same thing here, lib32-libgcrypt is 4Kb vs 240Kb (working package), and lib32-libgpg-error is 4Kb vs 8Kb (working package). For the lib32-libgpg-error it might be due to the new compression format, but I doubt that. I doubt very much that .xz compression can result in a change of 1/60th the original size for lib32-libgcrypt.
Last edited by lswest (2010-06-02 15:30:55)

How to solve the ASInstance error

hello everyone,
when i install the BIEE11g, I always met a same mistake, that is 'ASInstance install error'. then I lookup the log file, it writes 'ASInstance error, Error in starting opmn server. operation aborted because of a system call failure or internal error'. could you tell me how to solve it?
if i choose to skip the error and continue to install, i could not to visit the http://localhost:7001/analytics and could not succee to run startall command in opmn.
notes: my os is win xp sp3 and database vision is 11.2.0.1.0 and rcu is 1.1.5.0
thank you very much.
regards,
phoeny

hello everyone,
when i install the BIEE11g, I always met a same mistake, that is 'ASInstance install error'. then I lookup the log file, it writes 'ASInstance error, Error in starting opmn server. operation aborted because of a system call failure or internal error'. could you tell me how to solve it?
if i choose to skip the error and continue to install, i could not to visit the http://localhost:7001/analytics and could not succee to run startall command in opmn.
notes: my os is win xp sp3 and database vision is 11.2.0.1.0 and rcu is 1.1.5.0
thank you very much.
regards,
phoeny

[SOLVED] PACMAN sig errors

Hi,
So i have this problem which started about a week ago, i reckon around the time of that pacman update. Anyway i'm getting signing erros on package installs and a sudo pacman-key --init
sudo pacman-key --populate archlinux with and without sudo pacman -Syy fixes it....till i reboot then it errors up again. I've removed the /etc/pacman.d/gnupg folder etc reinstalled archlinux-keyring, pacman without a fix. Sorry my first post here is a beg for ideas to help but i'm more of a lurker then poster.
If anyone needs more info i am happy to provide as i really would love to solve this. Long live arch linux
cheers
Al
edit:
Should add the keys show up with pacman-key -l or -f etc after reboot but doesn't stop me from errors. so the keyring is still there but not searched? but if i do a pacman-key --refresh-keys then it will find new keys but this will not fix the errors and allow package install. needs the --init then populate to allow install.
hope i'm clear enough
Last edited by woznme (2013-03-12 12:39:32)

Allan it appears to be correct, and i disabled the ntpd check/set i had autostarting and that made no difference. Thanks for your efforts in helping troubleshoot this.
not sure this helps but if I logout my openbox session (--exit) then logon again the keyring is still working fine.
Last edited by woznme (2013-03-10 14:22:23)

(SOLVED) Compiz, GLX error even tough i start compiz with LIBGL_AWLAYS

Hi,
I have tried to read trough the wiki, google and forum. I cant get this to be solved?
I installed compis with:
# pacman -S compiz-fusion-gtk (no to emerald, emerald-themes and compiz-fusion-plugins-extra)
made sure metacity compositioning was off with gconf
then i added these:
gconftool-2 --set -t string /desktop/gnome/session/required_components/windowmanager compiz
gconftool-2 --set -t string /desktop/gnome/applications/window_manager/current /usr/bin/compiz
gconftool-2 --set -t string /desktop/gnome/applications/window_manager/default /usr/bin/compiz
Have added these to xorg.conf
ServerLayout:
Option "AIGLX" "true"
Device:
Option "XAANoOffscreenPixmaps" "true"
Option "DRI" "true"
Option "Accelmethod" "EXA"
added a section called "Extension" where i added:
Option "Composite" "Enable"
and a section "DRI" :
group "video"
mode 0660
If i launch compiz with :
LIBGL_ALWAYS_INDIRECT=1 compiz --replace --indirect-rendering
I still get the glx error! And i dont have the window borders. Read from the troubleshooting to activate the window decaritons, rezise and move, still the same.
Running Gnome with slim. And how should i launch the fusion-icon with a parameter? (ie LIBGL..) i get an error?
My specs: Dell d420, intel gma945 express
sincerely, THANKS!
#update 1: Dont know how, but it kinda works now think the problem was something with compiz-dekorator-gtk.
now my problem is, how to add it to startup?
Last edited by tiddylicious (2009-12-06 13:05:43)

Solved:
_NO_ xorg.conf. -Also synaptics driver, and im loading into the environment from inittab. These did the trick !

[SOLVED] libkmod: kmod_config_parse errors

Similar Messages

Maybe you are looking for