[Solved] Libreoffice 3.6.1.4 don't start

Hello,
please excuse my bad english.
I have a problem. Since the libreoffice update from 3.5.6 to 3.6.1.4 libreoffice don't start. For a short time i see the splash-screen and that's it. In the terminal, when i type soffice or lowriter or libreoffice --writer i can't see any message. Also i deleted the ~/.config/libreoffice folder. But that doesn't help. These packages are installed: libreoffice-common libreoffice-gnome libreoffice-de libreoffice-writer libreoffice-calc. When i downgrade to 3.5.6 everything is fine.
I have a laptop with openbox and a desktop-pc with gnome. Same problem on both systems.
Do you have any tip for me?
Thanks Michael
Last edited by Süerländer (2012-09-13 07:01:16)

Experiencing the same problem here though I found out that the reason for LibreOffice to crash/segfault is the existence of a aquabase-language-support.ttf file which as far as I remember was perfectly accepted in previous versions.
Once I remove it from my .fonts folder LibreOffice loads as it should (no deep testing performed though).
Therefore, in case you are using a .fonts folder on my behalf I would suggest to check out its content (back it up and empty the folder and add the fonts again one by one checking each time if LibreOffice crashes or not until you find which of them may be the reason for the crash).

Similar Messages

Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva

Sorry, we've tried to update Premiere Pro cc 2014 but the update failed. Now the option Retry doesn't work. There is other options to solve the problem? Now premiere don't start at all. Thank you in adva

Use the Adobe Cleaner Tool:
https://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html

Kmix and Klipper crashes and don't start, KDE 4.4 [SOLVED]

I had a trouble with Plasma after adding a "fancy panel" which was placed at the same position as my normal panel. Everytime I tried to remove it, Plasma crshed, so I had to delete a part of a config file. But also the Klipper and Kmix don't start:
Crash handler says:
Klipper:
Application: Klipper (kdeinit4), signal: Aborted
[KCrash Handler]
#5 0x00007f605cb97035 in raise () from /lib/libc.so.6
#6 0x00007f605cb98460 in abort () from /lib/libc.so.6
#7 0x00007f605cf84925 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6
#8 0x00007f605cf82d56 in __cxxabiv1::__terminate(void (*)()) () from /usr/lib/libstdc++.so.6
#9 0x00007f605cf82d83 in std::terminate() () from /usr/lib/libstdc++.so.6
#10 0x00007f605cf82e7e in __cxa_throw () from /usr/lib/libstdc++.so.6
#11 0x00007f605e0d0c12 in qBadAlloc() () from /usr/lib/libQtCore.so.4
#12 0x00007f605e0dc775 in qUncompress(unsigned char const*, int) () from /usr/lib/libQtCore.so.4
#13 0x00007f605e7824f1 in KPixmapCache::Private::loadData(int, QPixmap&) () from /usr/lib/libkdeui.so.5
#14 0x00007f605e7838eb in KPixmapCache::find(QString const&, QPixmap&) () from /usr/lib/libkdeui.so.5
#15 0x00007f605e6d434a in KIconCache::find(QString const&, QPixmap&, QString*) () from /usr/lib/libkdeui.so.5
#16 0x00007f605e6c74b3 in KIconLoader::loadIcon(QString const&, KIconLoader::Group, int, int, QStringList const&, QString*, bool) const () from /usr/lib/libkdeui.so.5
#17 0x00007f605e6c0b3d in KIconEngine::pixmap(QSize const&, QIcon::Mode, QIcon::State) () from /usr/lib/libkdeui.so.5
#18 0x00007f605d426775 in QIcon::pixmap(QSize const&, QIcon::Mode, QIcon::State) const () from /usr/lib/libQtGui.so.4
#19 0x00007f605d4136a4 in QWidgetPrivate::setWindowIcon_sys(bool) () from /usr/lib/libQtGui.so.4
#20 0x00007f605d3cda28 in QWidget::create(unsigned long, bool, bool) () from /usr/lib/libQtGui.so.4
#21 0x00007f605d404dc7 in ?? () from /usr/lib/libQtGui.so.4
#22 0x00007f605d4057e0 in QClipboard::QClipboard(QObject*) () from /usr/lib/libQtGui.so.4
#23 0x00007f605d3766a7 in QApplication::clipboard() () from /usr/lib/libQtGui.so.4
#24 0x00007f605e705fce in KClipboardSynchronizer::Private::setupSignals() () from /usr/lib/libkdeui.so.5
#25 0x00007f605e706572 in KClipboardSynchronizer::KClipboardSynchronizer(QObject*) () from /usr/lib/libkdeui.so.5
#26 0x00007f605e706624 in KClipboardSynchronizer::self() () from /usr/lib/libkdeui.so.5
#27 0x00007f605e701381 in KApplicationPrivate::init(bool) () from /usr/lib/libkdeui.so.5
#28 0x00007f605e7021ec in KApplication::KApplication(bool, KComponentData const&) () from /usr/lib/libkdeui.so.5
#29 0x00007f605e708493 in KUniqueApplication::KUniqueApplication(bool, bool) () from /usr/lib/libkdeui.so.5
#30 0x00007f6051c62459 in kdemain () from /usr/lib/libkdeinit4_klipper.so
#31 0x0000000000406b7e in _start ()
KMix:
Application: KMix (kdeinit4), signal: Aborted
[KCrash Handler]
#5 0x00007f605cb97035 in raise () from /lib/libc.so.6
#6 0x00007f605cb98460 in abort () from /lib/libc.so.6
#7 0x00007f605cf84925 in __gnu_cxx::__verbose_terminate_handler() () from /usr/lib/libstdc++.so.6
#8 0x00007f605cf82d56 in __cxxabiv1::__terminate(void (*)()) () from /usr/lib/libstdc++.so.6
#9 0x00007f605cf82d83 in std::terminate() () from /usr/lib/libstdc++.so.6
#10 0x00007f605cf82e7e in __cxa_throw () from /usr/lib/libstdc++.so.6
#11 0x00007f605e0d0c12 in qBadAlloc() () from /usr/lib/libQtCore.so.4
#12 0x00007f605e0dc775 in qUncompress(unsigned char const*, int) () from /usr/lib/libQtCore.so.4
#13 0x00007f605e7824f1 in KPixmapCache::Private::loadData(int, QPixmap&) () from /usr/lib/libkdeui.so.5
#14 0x00007f605e7838eb in KPixmapCache::find(QString const&, QPixmap&) () from /usr/lib/libkdeui.so.5
#15 0x00007f605e6d434a in KIconCache::find(QString const&, QPixmap&, QString*) () from /usr/lib/libkdeui.so.5
#16 0x00007f605e6c74b3 in KIconLoader::loadIcon(QString const&, KIconLoader::Group, int, int, QStringList const&, QString*, bool) const () from /usr/lib/libkdeui.so.5
#17 0x00007f605e6c0b3d in KIconEngine::pixmap(QSize const&, QIcon::Mode, QIcon::State) () from /usr/lib/libkdeui.so.5
#18 0x00007f605d426775 in QIcon::pixmap(QSize const&, QIcon::Mode, QIcon::State) const () from /usr/lib/libQtGui.so.4
#19 0x00007f605d4136a4 in QWidgetPrivate::setWindowIcon_sys(bool) () from /usr/lib/libQtGui.so.4
#20 0x00007f605d3cda28 in QWidget::create(unsigned long, bool, bool) () from /usr/lib/libQtGui.so.4
#21 0x00007f605d404dc7 in ?? () from /usr/lib/libQtGui.so.4
#22 0x00007f605d4057e0 in QClipboard::QClipboard(QObject*) () from /usr/lib/libQtGui.so.4
#23 0x00007f605d3766a7 in QApplication::clipboard() () from /usr/lib/libQtGui.so.4
#24 0x00007f605e705fce in KClipboardSynchronizer::Private::setupSignals() () from /usr/lib/libkdeui.so.5
#25 0x00007f605e706572 in KClipboardSynchronizer::KClipboardSynchronizer(QObject*) () from /usr/lib/libkdeui.so.5
#26 0x00007f605e706624 in KClipboardSynchronizer::self() () from /usr/lib/libkdeui.so.5
#27 0x00007f605e701381 in KApplicationPrivate::init(bool) () from /usr/lib/libkdeui.so.5
#28 0x00007f605e7021ec in KApplication::KApplication(bool, KComponentData const&) () from /usr/lib/libkdeui.so.5
#29 0x00007f605e708553 in KUniqueApplication::KUniqueApplication(bool, bool) () from /usr/lib/libkdeui.so.5
#30 0x00007f6051c524b0 in KMixApp::KMixApp() () from /usr/lib/libkdeinit4_kmix.so
#31 0x00007f6051c2b74d in kdemain () from /usr/lib/libkdeinit4_kmix.so
#32 0x0000000000406b7e in _start ()
How can I fix it?
Last edited by Staerseus (2010-02-14 12:19:01)

SOLVED! Update to the newest version of KDE 4.4 helped me!

[SOLVED] libreoffice "loading document after login takes 30+ sec"

I have an arch install running xfce and lxdm as my login manager I have installed libreoffice per wiki instructions and configured memory optimizations as follows:
Under Memory:
- Reduced the number of Undo steps 20 steps.
- Under Graphics cache, I set Use for LibreOffice to 128 MB.
- I Set Memory per object to 20MB.
- I Checked LibreOffice Quickstarter.
However, It still takes about 45 seconds to load any document, spreadsheet, or presentation after logging in. However when I load a second or third... document, spreadsheet, or presentation they load near instantly. Furthermore, if I open a terminal and type "libreoffice --writer /path/to/doc," I receive no errors or any verbose message. Has anyone encountered this? Any help would be greatly appreciated.
Last edited by forshark (2013-01-16 01:21:48)

Ok, I have solved libreoffice's unacceptable behavior on my machine by:
appending "/etc/hosts" with the following:
127.0.0.1 $HOSTNAME localhost $HOSTNAME.(none)
with $HOSTNAME actually spelled out
ex "127.0.0.1 archden localhost archden.(none)"
With this miracle cure your libreoffice installation will fall within an acceptable standard of behavior.
PS. praying libreoffice is far more glorious in this respect.

WEB.SHOW_DOCUMENT don´t start Firefox 3.5

Hi @all,
I want to call a report through Forms per web.show_document but Firefox don´t start. The URL is correct (I´ve tested it). I tried also to disable the Popup-Blocker but this didn´t solve the problem, too.
I call the fmx with a JNLP File.
There is no other browser installed on my system.
Are there any other settings in the browser (or maybe in the OS (WinXPPro SP3)) which could be responsible for this problem.
Thanks for your suggestions.
Thomas

Hi,
no, I run my forms in a Java Virtual Machine ( I start it with a JNLP-File) not directly in a browser. Adobe 9 is installed. In "showmyjobs" there are no report jobs listed, because the browser don´t start and try to open the report. When I copy manually the URL (which should call the report) from web.show_document into the browser the report starts. There is no problem in calling the report.
The problem is that web.show_document don´t start the browser or if the browser is already open a new tab to call the URL which I have written in web.show_document.
e.g.
web.show_document('http://www.google.de'. '_blank') should call google in a new browser tab or, if the browser is not opened already, in a new browser. But in my case the browser don´t start or don´t start a new tab page. This problem occurs in IE and in Firefox.
I use JDK 6 Update 16 and Forms works fine with that version.
I´ll try it tomorrow with another Java Version but I don´t think that this solve the problem.
Thomas

Some Apps don't start up anymore after upgrading to BB 10.2.1

I have upgraded to BB 10.2.1 today and am pleased to see new features and enhancements.
I also have to report a few issues though:
- startup takes much longer now
- several non native apps don't start up anymore. I even reinstalled some, but that didn't help. Any thoughts?

have you tried using Snap?
http://supportforums.blackberry.com/t5/Downloaded-Applications-for/You-Upgraded-to-OS-10-2-1-and-wan...
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

Notebook Toshiba L40 don't start when unplug power cable

When i unplug power cable system don't start and crash on login KDE or faster. When power cable is plug everything is ok. Tested on Kubuntu 9.04, Windows Vista and works ok. On Kubuntu 9.10 alpha 5 i have the same problem.
Sorry for my english

Hello AmlnnN,
I understand have you finished doing a little maintenance   work on the computer it now freezes periodically is that correct? I will do all I can to help you resolve this issue.
First thing lets run a couple test on some of your hardware.
See steps below:
1.       I want you to boot into the bios menu this link will show you how.
2.       Once in bios go over to the diagnostic option at the top.(Note you will need to use the arrow keys to navigate)
3.       You may see 2 test there if that is the case run both test.
4.       It may take some time so please have the ac adapter plugged in.
5.       Once the test finished press F9 to setup defaults and then press F10 to save and exit.
Also find out while you’re in the bios if the computer ever freezes there.
Pleas respond back with your results at your earliest convenience.
Thank You
Clicking the White Kudos star on the left is a way to say Thanks!
Clicking the 'Accept as Solution' button is a way to let others know which steps helped solve the problem!

Itunes don't start (First installation)

Hello,
French user in enterprise ... we have a 60 iPhones and we want to install Itunes on PC of the User.
PC are under Windows 7 Prof. and in a domain.
Installation on the User domain account = OK but launch Itunes = 50% OK and Other KO (Itunes never start)
if KO : under session domain admin = itunes start OK ; under session Local admin = itunes start Ok
We declare the domain User as Admin local and iTunes Dont't Start (again)
When I tell don't start, no msg of erreur, no process in the process list in the monitor.
We try to install the Setup (x64) as administrator (right clic) => launch setup = install OK
Same bug when we want to start itunes since the user domain account.
We can't change the user account.
We 're thinking there is authorization problem but we can't find where.
All we found on forum and else aren't solve the bug.
A fix ? A link ? to help use ... we have 10 PC whith the start bug and we are near the suicid

Resolve
We found bad directory redirection for "documents" on domain GPO (redirection on a old server).
We :
* change the bad value in the GPO.
* restart the PC and login with the domain user account. GPO apply correctly.
* launch iTunes and ... miracle ... Itunes Start correctly.
No thanks to Apple, because:
* no error message,
* no information for bad directory to create iTunes directory in "my music",
* no question to write/declare a new location cause of error create iTunes directory for the media bank
* just close Itunes on the error without information and 6 hours loose in search for the cause.
Thanks to fromsouth to the search way.
See you soon

Ai CS2 Suddenly don't start..!

Suddenly, Ai CS2 don't start, just launching the app gives the message "Could not complete requested operation" and quit.
Since 3 weeks ago I've been working on both CS2 and CS3 versions with no problems, and today CS2 don't wanna go...!
b I need CS2 because I make preseparated files that in CS3 don't work on my Harlequin Rip Station (another issue I have to solve soon)
I've deleted the CS2 preferences folder and the "com.adobe.illustrator.plist"
file with no results.
Now, under another user, both versions opens fine...
OsX 10.4.11 Brand new MacPro Dual core Intel, 5 Gb RAm....
any Idea, somebody whit the same situation?

It can be a corrupt font or a corrupt color profile.
Fonts are good suspects as in a new user certain fonts will not load especially if they are managed by a font manager.
Display and other colro profiles can get corrupt as well I would first look at the fonts, way to quickly find out if it is the problem is to deactivate them except for the system fonts.
Trash AA's Settingts folder again and see if all is well if so it is definitely the font. If not I would suspect the possible but rarely
the culprit color profile.

After IOS 8 upgrade IPad 2 don't start

Hi,
After IOS 8 upgrade my IPad 2 don't start and just show this screen and nothing works.

My ipad2 is having the same problem. I can get it to start up by plugging the charger in. I can then unplug it and it is working - but very slow and prone to randomly shutting things down.

After add (in a wrong way) a new disk in ASM, cluster don´t start

Hi,
Environment:
Oracle RAC 10gR2
2 nodes windows 2003 advanced server (node1 called "database1" and node2 called "database2").
ASM
san storage
Case:
My client has tried to add a new disk (in a environment san) in ASM with the next steps:
1. database1 and database2 are up.
2. instance ASM1 from database is up and instance ASM2 from database2 is down (I don´t know why¿¿¿¿¿¿¿??????????).
3. add a new disc from san storage to instance ASM1. At the end, a lot of errors show in screen due to instance ASM2 was down.
4. client tried to up +ASM2 and then , all the cluster crashed.
5. reboot boths nodes database1 and database2 , and Windows 2003 Server don´t start well (hung up, due to services from oracle cluster are "automatically start"-
6. disable oracle services in "not automatically start" and windows 2003 server start well.
7. now oracle rac don´t start, ASM don start, instances don´t start ....
what can I do? any idea?
Regards.
Laura

Did you try to bring the U1 and it's associated ASM instance up while the other node is shutdown? Are you using Oracle clusterware?

Reports Multi-tier server from Dev 2000:v 1.6.1 don't start on solaris 8

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

Reports Multi-tier server from Oracle Developer 2000:version 1.6.1 don't start on Sun Sparc Solaris 8, it writes:
Segmentation Fault (core dumped). What i have to do?

Oracle 8.1.7 on windows 2000 don't start automatic :(

Why Oracle 8.1.7 don't start automatic on windows 2000 :(
Services
Oracleora3Agent
Oracleora3DataGatherer
Oracleora3TNSListener
OracleServiceORA3
are started autamatic. (ora3 is SID)
if I execute command "startup open" in Server Manager (svrmgrl), then DataBase started

I've got the same problem.
However, I've found that if I set the OracleServiceXXX startup to manual, If I then issue a net start statement it works OK.
i.e NET START OracleServiceXXX
Hope this helps.

Downloaded songs don't start at the beginning of the song, why?

the songs i bought from itunes don't start at the beginning of the song, it's just the preview clip.

Been having the same problems myself. And I don't know about you but sometimes it'll take a while to get it to actually play the first song.

Java Apps don't start automaticaly after system restart

Hi,
Since a few days ago when restarting Java application servers of SAP
Portal, the applications deployed don't start for itselfs.
When starting the instance, the memory stops to increase at 500mb. The
only way to start the applications is by the manual way in:
Server -> Services -> Deploy -> Runtime -> Application -> Start
Application.
After starting the applications manually the instance starts fine.
I already increased some values in global configuration:
From:
InitialThreadCount = 40
MaxThreadCount = 150
MinThreadCount = 40
To:
InitialThreadCount = 80
MaxThreadCount = 200
MinThreadCount = 80
After the restart the applications are not starting automaticaly yet.
I have 4 instances. The first two instances are starting fine, but the problem is happening with the other 2 instances.
Is there any reason for this type of behavior?
Thanks for the help
Pedro Nunes

Hello Vyara,
thanks for your reply.
This kind of problem happens since 3 weeks ago and the stack of this system (SP09) remain unchangeble since 07.04.2008.
The strange behavior is that the Server 1 and 2 are starting all the apps fine, but this problem is only happens in server 3 and 4.
Can you help please?
Thanks

[Solved] Libreoffice 3.6.1.4 don't start

Similar Messages

Maybe you are looking for