[SOLVED] libreoffice "loading document after login takes 30+ sec"

I have an arch install running xfce and lxdm as my login manager I have installed libreoffice per wiki instructions and configured memory optimizations as follows:
Under Memory:
- Reduced the number of Undo steps 20 steps.
- Under Graphics cache, I set Use for LibreOffice to 128 MB.
- I Set Memory per object to 20MB.
- I Checked LibreOffice Quickstarter.
However, It still takes about 45 seconds to load any document, spreadsheet, or presentation after logging in. However when I load a second or third... document, spreadsheet, or presentation they load near instantly. Furthermore, if I open a terminal and type "libreoffice --writer /path/to/doc," I receive no errors or any verbose message. Has anyone encountered this? Any help would be greatly appreciated.
Last edited by forshark (2013-01-16 01:21:48)

Ok, I have solved libreoffice's unacceptable behavior on my machine by:
appending "/etc/hosts" with the following:
127.0.0.1 $HOSTNAME localhost $HOSTNAME.(none)
with $HOSTNAME actually spelled out
ex "127.0.0.1 archden localhost archden.(none)"
With this miracle cure your libreoffice installation will fall within an acceptable standard of behavior.
PS. praying libreoffice is far more glorious in this respect.

Similar Messages

LiveCycle doesn't load document after tracking permission

After permitting LiveCycle to track my use of the software, I have not been able to load my document since. I've been trying now for about 5 hours and the software just doesn't load.

This is the error message I'm getting today:
xml parsing error: no element found (error code 3) line1, column1, of {C:\document}. Don't know how to access server file log. I was almost finished with this document. Is there a way to edit outside of LiveCycle Design?

[SOLVED] Skype crashing soon after login

Hi Everyone,
I'm using OSS.
I installed skype-oss and successfully managed to use it yesterday.
I tried to revert back to ALSA this morning, but as I wasn't able to get it working, I decided to stick to OSS.
Skype just crashes soon after I login. I've tried what was suggested here: https://wiki.archlinux.org/index.php/Sk … mmediately , but it hasn't helped.
Contents of:
1. /etc/modprobe.d/alsa_blacklist.conf
blacklist soundcore
2. rc.conf
DAEMONS=(hwclock syslog-ng !network netfs crond oss dbus wicd)
gdb output:
(gdb) r
Starting program: /usr/bin/skype
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/lib/libthread_db.so.1".
[New Thread 0xb76a4b40 (LWP 943)]
[New Thread 0xb74c1b40 (LWP 944)]
[New Thread 0xb72ffb40 (LWP 945)]
[New Thread 0xb6afeb40 (LWP 946)]
[New Thread 0xb68ffb40 (LWP 947)]
[New Thread 0xb687eb40 (LWP 948)]
[New Thread 0xb67fdb40 (LWP 949)]
[New Thread 0xb677cb40 (LWP 950)]
[Thread 0xb67fdb40 (LWP 949) exited]
[New Thread 0xb5f7bb40 (LWP 951)]
Program received signal SIGSEGV, Segmentation fault.
0x08355977 in ?? ()
Is there anything I can do to get Skype working again?
Thanks,
Samuel
Last edited by samebchase (2012-03-13 17:23:18)

Ehm... Does your sound work with oss? As in can you hear sound?
Try fresh Skype configuration directory:
mv ~/.Skype ~/.Skype_bcc
To revert back to ALSA you need to uninstall OSS and remove the blacklisted modules, and then restart or
modprobe soundcore

Windows Login Takes Way too Long to Load

New computer (Satellite L870) - recevied mid Sept. Until last week, everything was ok. During startup, computer takes 15+ minutes to load the windows login (password request) screen. Did not begin doing this after new software was loaded. Did a system restore to earliest possible point. Ran any and all diagnotic programs on the computer - all come up with nothing. Once the password is entered, computer works fine but why does it take so long to get to that point?

If it doesn't cause you too much difficulty, it's best to restore the hard disk to its original out-of-the-box contents using Toshiba recovery media. The process will wipe the drive clean, of course.
If that creates too much work, we can troubleshoot. Start by letting us know what happens when you boot into Safe Mode.
Start your computer in safe mode
See if you can identify where the hang-up occurs.
Always tell us which Satellite L870 you have when you post here. There is a label on the bottom.
-Jerry

Takes longer then normal to load hotmail after submitting user credentials and doing this on other websites

firefox takes longer to load webpages after submiting user credentails on websites such as hotmail or banking websites. this has been doing this since i upgraded firefox. also been experiencing alot of firefox crashes since the upgrade. firefox is usually a better and faster brouwser then IE9.

-> Tap ALT key or press F10 to show the Menu Bar
-> go to Help Menu -> select "Restart with Add-ons Disabled"
Firefox will close then it will open up with just basic Firefox. Now do this:
-> Update ALL your Firefox Plug-ins https://www.mozilla.com/en-US/plugincheck/
-> go to View Menu -> Toolbars -> unselect All Unwanted toolbars
-> go Tools Menu -> Clear Recent History -> ''Time range to clear: '''select EVERYTHING''''' -> click Details (small arrow) button -> place Checkmarks on '''Cookies & Cache''' -> click "Clear Now"
-> go to Tools Menu -> Options -> Content -> place Checkmarks on:
1) Block Pop-up windows 2) Load images automatically 3) Enable JavaScript
-> go to Tools Menu -> Options -> Privacy -> History section -> ''Firefox will: '''select "Use custom settings for history"''''' -> REMOVE Checkmark from "Permanent Private Browsing mode" -> place CHECKMARKS on:
1) Remember my Browsing History 2) Remember Download History 3) Remember Search History 4) Accept Cookies from sites -> select "Exceptions..." button -> Click "Remove All Sites" at the bottom of "Exception - Cookies" window
4a) Accept Third-party Cookies -> under "Keep Until" select "They Expire"
-> REMOVE CHECKMARK from CLEAR HISTORY WHEN FIREFOX CLOSES
-> go to Tools Menu -> Options -> Security -> place Checkmarks on:
1) Warn me when sites try to install add-ons 2) Block reported attack sites 3) Block reported web forgeries 4) Remember Passwords for sites
-> Click OK on Options window
-> click the Favicon (small drop down menu icon) on Firefox SearchBar (its position is on the Right side of the Address Bar) -> click "Manage Search Engines" -> select all Unwanted Search Engines and click Remove -> click OK
-> go to Tools Menu -> Add-ons -> Extensions section -> REMOVE All Unwanted/Suspicious Extensions (Add-ons) -> Restart Firefox
You can enable your Known & Trustworthy Add-ons later. Check and tell if its working.

Reader stops when after loading document. Says stops working! It will load without any document!

Reader stops when after loading document. Says stops working! It will load without any document! Help!?? This has been going on for several months. Help!

What is your operating system? Reader version?

[SOLVED]Run startx after login?

I have a laptop with multiple users.
Is it possible to have a different setup for each user, stored in their /home/ folder? So, when I log in, all I see is the terminal, but when another user, say a guest user, logs in, LXDE starts up.
Right now, I put this in my .xinitrc file (startlxde in guest, xmonad in my own), but is it possible to set start different programs for different users after login? I would prefer start x on my own from my own user, but my brother who frequently use my laptop don't want to type startx each time he logs in.
Last edited by Herover (2012-06-27 18:41:33)

Assuming you set up the right .xinitrc in each users ~/ this (from the wiki) will startx automatically for each user you decide to bless with the additions to their .bash_profile
.bash_profile wrote:if [[ -z $DISPLAY ]] && [[ $(tty) = /dev/tty1 ]]; then
startx
fi
Edit: Here is the article.
Last edited by Psykorgasm (2012-06-27 18:00:35)

Satellite L500 - blank blue screen after login to Win 7

Hi
I have this laptop and i can start up the laptop and it loads fine to the login page i then can login but when the screens opens after login it appears as a blank blue screen with the document folder open i have no background picture and no startup menu nothing else except the document folder.
From there i can access my files etc and anything else internet etc everything but i dont know how to get the screen back to normal.
If i go on background display i can see the image that should be on the background and change it but nothing happens on the full screen.
I have no restore point as yet as new laptop for xmas, i do have backup discs but think its just something to do with the display.
If go into files and folders it shows me the icons on the desktop but all i see is this blank screen.
Any ideas please, if not would restore files work or full back up disc
Thanks very much for any help

Hi
Check this:
Click right on the desktop and choose Personalize.
There you should check the area: Basis design and design with high contrast
Choose Windows 7 basic.
Then reboot the unit.
Usually this should help to get the Windows 7 common design and desktop settings.
But if this will not help then you could use an fast solution which would be a usage of the recovery disk of HDD recovery option.
This would format the HDD and would reinstall everything again

OSX 10.9 Mavericks is there any way to hide servers which always appear in finder after login (hide login items doesn't work as stardered)

hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
Cheers
Gordon
Network Admin
BPDZenith

hi all my boss has just got himself a nice new mac and wants to connect it on to my windows domain at work, no problems there it’s all connect fine, one thing we done was to map a few of our network drives on our domain so he can easily load them to his mac, works great when it’s on the domain however when he goes home and logs in for each mapped drive it throws up a window saying it can’t connect or when it is connect opens up every drive, even after disabling them at login, now on the apple website the text reads "if you don’t want an item's window to be visible after login, select hide. (Hide does not apply to servers, which always appear in the finder after login), does anyone know any work around that can maybe solve this or point me in the direction where I can find one.
Cheers
Gordon
Network Admin
BPDZenith

HT3964 My MacBook Air running on Snow Leopard gets extremely slow (almost like a hang, except if you wait about half an hr, it actually moves) after login interface. sometimes it never gets past the background. Cannot log back in.

My MacBook Air running on Snow Leopard gets extremely slow (almost like a hang, except if you wait about half an hr, it actually moves) after login interface. Sometimes it never gets past the background of the homepage, desktop doesn't seem to load. After multiple forced shut downs and left to run for hours, sometimes the desktop loads but the dock does not respond when applications are opened. The computer is then unable to shut down normally. Forced shut downs are necessary most times. Time machine backup takes extremely long, and attempts to use the time machine to bring the laptop back to the time befiore the problem arose was met with extremely slow and hung time machine function.
Please help!

There isn't much besides a failing hard drive or other hardware fault that can cause those symptoms. Run the Apple Hardware Test, or just take it to an Apple Store for testing.

Firefox stops loading pages after trying to open a heavy page

firefox stops loading pages after trying to open a page with alot of pictures etc, with big size. it just keeps on loading pages with no result.
my internet is fairly low speed so i take my time but this happened each time i tried to open such sites.
even when i close that '''tab''' and try to open just '''google.com''' , it wont load.
its solved after closing and opening firefox again . but happens again if i try to open the same heavy site

Which security software (firewall, anti-virus) do you have?
A possible cause is security software (firewall,anti-virus) that blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full unrestricted access to internet for Firefox and the plugin-container process and the updater process.
See:
*https://support.mozilla.org/kb/Server+not+found
*https://support.mozilla.org/kb/Firewalls
try to boot the computer in Windows Safe mode with network support (press F8 on the boot screen) as a test to see if that helps.

Firefox stops loading websites after a while

Unfortunately I can't narrow down the problem very much. Firefox just stops loading websites after a while without any obvious reasons - while Chrome or IE work, so it's not a connection problem AND I have it on at least 2 PCs. This is my environment:
Windows 7 x64 Ultimate and Pro, all important updates installed. Both PCs have 8-16 GB RAM, SSD - can't be a resource issue.
Actual version of Kaspersky Internet Security is used, Firefox is not blocked.
Firefox version 37.0.1
Some FF AddOns in use: AdBlock Edge, BetterPrivacy, ColorZilla, Firebug, Flashblock, Ghostery, Web Developer
I'm certain I don't have a virus and the issue is present on a brand new installed system as well. I don't use a proxy, DNS prefetching is disabled and IPv6, too.
It seems to happen more often when the PC hasn't been touched for 20 minutes or so (PC is not falling asleep) and after sleep modes, however it also happens just in the middle of working. I usually have 10-20 pages open (resource friendly ones usually) at once.
This also happens for websites that are already loaded. A click on reload also leads to a can't load website error.
I can't exactly say when this issue started, probably in the last 6 month with some FF update. Before it worked fine. This is becoming a real issue for me because FF becoming very unreliable.
Does anyone else experience this behaviour or has a fix for it?
NB: you may want to check the compatibility of your "None of these solve my problem" button. It might be a Chrome (41.0.2272.118m) issue but if someone's FF is not working and he's trying to find help using another browser...it might be a dead end (nothing happens on click).
Example: https://support.mozilla.org/en-US/questions/new/deskto/other?search=can%27t+load+websites+after+while#summarize-question

Does Firefox work normally again after exiting it and starting it backup again?
Several users reported with Firefox 36 that Firefox would eventually not be able to load more pages. One believed that Firefox was no longer sending DNS requests, which is a prerequisite to being able to connect to the web server. I don't recall that we identified the source of the problem, but in many cases, it was "something" in the settings folder.
Along those lines, could you conduct this test:
'''Create a new Firefox profile'''
''This is in addition to and does not replace your existing settings.''
A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should come with completely fresh settings databases and a fresh cache folder.
Exit Firefox and start up in the Profile Manager using Start > search box (or Run) -- type or paste the following and press Enter:
firefox.exe -P
''Don't delete anything here.''
Any time you want to switch profiles, exit Firefox and return to this dialog.
Click the Create Profile button, assign a name like April7, and ignore the option to change the folder location. Then start Firefox in the new profile you created.
It might take a while to determine whether the new profile is works better than your old one. If you want to import your bookmarks from your regular profile during that time, here's how:
You can use the Library dialog (Ctrl+Shift+b or "Show All Bookmarks") to access the Restore feature. The trick is knowing where to find your bookmark backups in your regular profile. After clicking Choose File... you can paste this into the file name space and press Enter to drill down to your profile folders:
%APPDATA%\Mozilla\Firefox\Profiles
The semi-randomly-named folder that has your last backup is usually the one ending with "default". Click into that one, then into the '''bookmarkbackups''' folder. Here you can pick the most recently updated file to restore.
Important: restoring a bookmark backup wipes any bookmarks currently in your active Firefox profile and replaces it with the contents of the backup file.
I think it's also reasonable to install AdBlock Plus and Web Developer, as those, by themselves, are unlikely to be the source of this seemingly rare problem. But I wouldn't add all your extensions at once to the new profile.

Problems after login

My Mac started doing this a few weeks ago, where after login it all kind of collapses. Sometimes the desktop icons won't show up, or Hear (which runs on startup) will get stuck loading for a long time. Sometimes everything seems fine but no programs will launch, or the dock won't respond.
So far I've done an Onyx cleanup run, a Disk Verify and Repair, Permissions Verify and Repair and even did the good old Command+R on startup and reinstalled Lion. It worked the first time and then it went back to its old antics.
Any ideas? I'm afraid if its a corrupted file and even if I get a new Mac (this one has gone through all kinds of things, including getting catapulted out of my backpack into the street in Hungary) then when I restore from Time Machine it'll carry over.
Thanks

If a new user solved the issue, then you either have too many apps starting up at login and/or at least one which puts problems. In order to see what you have there go to system preferences/users and groups/you/login items, you must have a short list, as attached.
If not too many here, then you may have a corrupt system.

Load datasources after PageLoad

Im doing a WebApp using DashCode 3.
It shows all Opentimes for restaurants based on different citys in Sweden using data from an XML- file and i have connect the XML- File with datasources and bindings.
The problem is when I load the WebApp it takes to long time for it to execute (load). It takes about 1 minute.
So how can I load the data from the XML-File when you visiting each view. So when I start up the app it loads the first View (not the data from the XML-file) and when I come to a view that is attached with bindings from the datasource it loads the data XML-file at View time or on click Time
The xml-file Im using is very large so I divided it to 10 diffrent xml-files wich dosent seem to reduce the loading time, it wants to load everything on first load so to say.
I already tired to look everywhere, bought books "Dashcode for Dummies" payed for Online courses on the net, but cant find the answer anywhere. Is it just me...
This is what i done.
Starting a new project and choosed the costum template.
Using a Stacklayout with diffrent view.
My categories is for example "Göteborg" that is connected to a new view by the "On click Event"
var stackLayout = document.getElementById('stackLayout').object;
stackLayout.setCurrentView('GoteCatView', false, true);
On this view all names for the restaurants in Göteborg will come up on a "Rounded rectangel list"
From here I connect one of the datasources from one of the XML-Files using the title.
From this view you can go to the DetailedView to see the adress and the Opentime for the restaurant.
Everything works, but it takes to long time to load? There must be a way!
This is the URL to see the APP
http://www.raptisahlgren.se/APPS/Lumico

But i have different movie clip in every frames which need to
play the same sound file after the mc finish loading. I created all
the mc and simply pull them onto the stage from the library.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding.

Hi, I got the problem with Firefox 27.0.1. I can not run Selenium on Firefox after login a website for automation testing. The browser is not responding. However when I close Nunit, the page is back to be normal. The title is returned to the name of website without "not responding". I sure this problem did not happen on Firefox version 26. I just got this problem when firefox upgrading automatically to version 27. Please help me fix this problem because it is very important for my work. If you need more information pls send your concerns via my email address.
Thanks so much

Hi, the work around suggested above should put you in working mode in the meantime. However to help investigate the issue it is possible to analyze what is not loading or taking a long time by analyzing the network traffic or http headers of the Nunit web page.
*[https://addons.mozilla.org/en-us/firefox/addon/live-http-headers/]
*Web developer Tools > Web console
If you post the results with out the user data, we are happy to help.

[SOLVED] libreoffice "loading document after login takes 30+ sec"

Similar Messages

Maybe you are looking for