[SOLVED] Libreoffice StartCentre is Mainly Transparent
Since LibO 3.4 I have this weird issue where the startcenter is cut off and shows the background of what's underneath. Did not have this issue on Libreoffice 3.3. Still have the issue on 3.5. When I boot into windows and mac on same laptop, the start centre looks fine.
Anyone else have this issue? Anyone know how to fix it. When I resize the window it looks even more whack. I have not found any relevant bug reports. I have Intel onboard graphics. Sometimes some dialogs will be completely transparent for a few seconds before I can see. Just like the corners. An example of this would be when I close firefox. The tab warning dialog will be completely transparent for a few seconds like the corners of the window below.
Last edited by quasifilmie (2012-02-25 02:51:29)
Yeah I have used other DEs and have the same problem. I just launched it again and now I have overlapping. Ran gnome-shell replace in terminal and the overlapping stops but the transparency stays. Weird that the start center has not really changed since LibO 3.3 but that I do not have the problem using that version.
EDIT: the intel driver upgrade seems to have fixed the issue.
Last edited by quasifilmie (2012-02-25 02:39:21)
Similar Messages
-
[SOLVED] libreoffice "loading document after login takes 30+ sec"
I have an arch install running xfce and lxdm as my login manager I have installed libreoffice per wiki instructions and configured memory optimizations as follows:
Under Memory:
- Reduced the number of Undo steps 20 steps.
- Under Graphics cache, I set Use for LibreOffice to 128 MB.
- I Set Memory per object to 20MB.
- I Checked LibreOffice Quickstarter.
However, It still takes about 45 seconds to load any document, spreadsheet, or presentation after logging in. However when I load a second or third... document, spreadsheet, or presentation they load near instantly. Furthermore, if I open a terminal and type "libreoffice --writer /path/to/doc," I receive no errors or any verbose message. Has anyone encountered this? Any help would be greatly appreciated.
Last edited by forshark (2013-01-16 01:21:48)Ok, I have solved libreoffice's unacceptable behavior on my machine by:
appending "/etc/hosts" with the following:
127.0.0.1 $HOSTNAME localhost $HOSTNAME.(none)
with $HOSTNAME actually spelled out
ex "127.0.0.1 archden localhost archden.(none)"
With this miracle cure your libreoffice installation will fall within an acceptable standard of behavior.
PS. praying libreoffice is far more glorious in this respect. -
[SOLVED] LibreOffice and Network Shares via Gigolo
My work desktop mounts shares in Active Directory using Gigolo. I am able to mount, browse and generally be at peace with the world with this setup with Thunar and Nautilus, and everything else (eg, gedit).
For some reason, LibreOffice refuses to show any of the network mounts. When I try and save a document, the mounted shares just aren't there. I would expect them to show under "My Documents" in the left of this [img]screenshot[/img].
Browsing to ~/.gvfs/ doesn't display anything either.
If I try and open a file from any of the shares by double-clicking them in Thunar/Nautilus then I get the LibreOffice splash screen and then nothing. The main window doesn't open and the process terminates.
Any ideas folks?
Last edited by fukawi2 (2013-11-18 22:16:22)Well that's embarressing that it was that easy. That makes the whole thing look much better too. I had no idea there was a split of a separate Gnome package, but looking at the wiki it doesn't appear to be mentioned anywhere other than for making everything look nicer. I might fix that up.
Thanks Awebb +50 internets for you. -
[SOLVED] Libreoffice icons in Arch
Hello,
I am using Arch 64bits (KDE4) and I just upgraded to Libreoffice 3.3.1. I'v read in release note that icons have changed for this version but in the KDE Kickoff menu icons look like the old OOO ones. any idea why and how to change that ?
regards
Olivier
Last edited by supercow (2011-02-25 11:53:04)not the menu icons. the ones in the startcenter main menu of libo have changed. just start it using libreoffice.
-
[SOLVED] libreoffice update "failed to read path from javaldx"
I don't have java installed as I do not use it (aside from whatever is built into chromium I guess). Libreoffice started up fine before the update. I had the option checked to not use java in the gui. Now it won't load at all. Is java-runtime now a hard dependency of libreoffice-common package? Is there any way to disable it? My ~/.config/libreoffice/4/user/config/javasettings_Linux_X86_64.xml looks like this:
<?xml version="1.0" encoding="UTF-8"?>
<!--This is a generated file. Do not alter this file!-->
<java xmlns="http://openoffice.org/2004/java/framework/1.0" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<enabled xsi:nil="false">false</enabled>
<userClassPath xsi:nil="true"/>
<vmParameters xsi:nil="true"/>
<jreLocations xsi:nil="true"/>
<javaInfo xsi:nil="true"/>
</java>
I am looking into other files included with "pacman -Ql libreoffice-common" but can't seem to figure it out yet.
Edit: Also I have tried "# chown -vR dodo3773:users ~/.config" per the LibreOffice wiki entry. No pacnew files or anything in /etc either.
Last edited by dodo3773 (2013-05-25 06:10:55)foutrelis wrote:
There was an issue with ICU 51.2; try updating to libreoffice 4.0.3-3.
Relevant bug: https://bugs.archlinux.org/task/35466
I'll wait a little bit for the mirrors to all sync up and try again. Marking as solved since it is a known issue with fix on the way. Thank you. -
[SOLVED] Libreoffice Menubar
Hi, i have problem with KDE appmenu with gtk apps and libreoffice. especially my questions about libreoffice. libreoffice-extension-menubar (aur) is outdated, so i want use libreoffice with menubar in application. But when i activate menubar in kde, libreoffice menubar is missing.
i want to menubar appear in application (libreoffice) so i want except libreoffice from menubar (like gtk apps)
note: sory my english
Last edited by nfat (2014-02-27 18:03:14)i solved problem, i remove libreoffice-gnome package, now menubar appear in application but libreoffice looks ugly.
edit: install libreoffice-kde4 package now looks better
Last edited by nfat (2014-02-27 18:03:01) -
[SOLVED] Libreoffice Impress - Horizontal Scroll Broken
So Libreoffice Impress on my setup, even before the big upgrade to 3.4.2, has had this issue where the slide viewer portion of the window actually overlaps the horizontal scroll bar and buttons, which makes them unusable. I don't know if this is an issue with my DE or if it's an upstream problem, but it's ugly and frustrating when trying to work on something big like a poster. Right now, the issue shows up with KDE 4.7, I can't remember if I tried this with GNOME 3.
Here's a picture of the problem:
http://postimage.org/image/31eqjbb50/
Suggestions are appreciated.
Last edited by Deemoney14 (2011-08-07 15:31:20)I had this too and solved it (search on this forum after reading this).
It Is caused by native libreoffice.org QT4 integration, which is flaky.
Install and use the gnome integration package libreoffice-gnome.
Not sure if you also need libreoffice-kde4 (for the kde4 file dialogs)
I just installed both of these packages.
And add this line to your /usr/bin/soffice
export OOO_FORCE_DESKTOP=gnome soffice
This forces libreoffice to always use above settings.
But the file /usr/bin/soffice will be written over when you update the packages.
So perhaps it is better to add the export to your bashrc or something.
Good luck and let us know if this works
John
PS In kde 4.7 there is a much improved kde4 compatibility mode for gtk apps under kde4.
This will give you visually better results than the native soffice QT4 integration anyhow.
PPS How is kde4.7 working anyway? I am hesitant to "upgrade" from a .5 point release to a .0 point release.
Is it stable?
Last edited by jwork123nl (2011-08-07 07:53:51) -
[Solved] Libreoffice beta
Just installed libreoffice and realized that it installed the beta. I am having problems opening files and was hoping to just install the most stable version. How can I do this? Thanks
Last edited by jrock2004 (2013-09-12 18:41:17)Next time please include more details e.g. how did you install libreoffice - the exact command you used.
Often the wiki will have some info on how to do stuff the proper way, some troubleshooting tips etc.
Glad you got it working.
Please remember to mark the thread as solved https://bbs.archlinux.org/viewtopic.php?id=130309 -
[Solved] Libreoffice segfaults on startup in libicule.so.51.2
When I try to start Libreoffice, it just segfaults. The loading splash screen only flashes for a split second.
Here are a few log entry examples:
kernel: soffice.bin[10272]: segfault at 7f5ffc143820 ip 00007f600d3e2350 sp 00007fffb3735818 error 4 in libicule.so.51.2[7f600d3c0000+55000]
systemd-coredump[10277]: Process 10272 (soffice.bin) dumped core.
kernel: soffice.bin[10423]: segfault at 7f8564c6b820 ip 00007f85773ba350 sp 00007fff00b4b428 error 4 in libicule.so.51.2[7f8577398000+55000]
systemd-coredump[10427]: Process 10423 (soffice.bin) dumped core.
kernel: soffice.bin[10845]: segfault at 7f1e63923820 ip 00007f1e7a082350 sp 00007fff750d60e8 error 4 in libicule.so.51.2[7f1e7a060000+55000]
systemd-coredump[10849]: Process 10845 (soffice.bin) dumped core.
Research only led me to some Arch bug reports with the same problem [1] [2], but they are all marked as fixed.
And I'm running the versions that are the most recent as of this post:
local/libreoffice-calc 4.0.4-1 (libreoffice)
Spreadsheet application for LibreOffice.
local/libreoffice-common 4.0.4-1 (libreoffice)
common files for LibreOffice - a productivity suite that is compatible with other major office suites
local/libreoffice-de 4.0.4-1
German language pack for LibreOffice
local/libreoffice-impress 4.0.4-1 (libreoffice)
Presentation Application for LibreOffice.
local/libreoffice-writer 4.0.4-1 (libreoffice)
Word Processor Application for LibreOffice.
local/icu 51.2-1
International Components for Unicode library
local/fontconfig 2.10.93-1
A library for configuring and customizing font access
local/cairo 1.12.14-4
Cairo vector graphics library
local/freetype2 2.5.0.1-1
TrueType font rendering library
When I run libreoffice --backtrace, it starts up without segfaulting. But all text except in the work area is missing. Here are some screenshots: [1] [2]
Here is the gdbtrace.log:
warning: Currently logging to gdbtrace.log. Turn the logging off and on to make the new setting effective.
warning: no loadable sections found in added symbol-file system-supplied DSO at 0x7ffff7ffa000
warning: Could not load shared library symbols for linux-vdso.so.1.
Do you need "set solib-search-path" or "set sysroot"?
[Thread debugging using libthread_db enabled]
Using host libthread_db library "/usr/lib/libthread_db.so.1".
[New Thread 0x7fffe8145700 (LWP 11781)]
[New Thread 0x7fffe030c700 (LWP 11782)]
[New Thread 0x7fffdfb0b700 (LWP 11783)]
[New Thread 0x7fffdd126700 (LWP 11784)]
[New Thread 0x7fffcffff700 (LWP 11787)]
[Thread 0x7fffcffff700 (LWP 11787) exited]
[Thread 0x7fffe030c700 (LWP 11782) exited]
[New Thread 0x7fffe030c700 (LWP 11964)]
[New Thread 0x7fffcffff700 (LWP 11965)]
[Thread 0x7fffcffff700 (LWP 11965) exited]
[Thread 0x7fffe030c700 (LWP 11964) exited]
[New Thread 0x7fffe030c700 (LWP 12045)]
[Thread 0x7fffdd126700 (LWP 11784) exited]
[Thread 0x7fffe030c700 (LWP 12045) exited]
[New Thread 0x7fffe030c700 (LWP 12046)]
[Thread 0x7fffe030c700 (LWP 12046) exited]
[Thread 0x7fffdfb0b700 (LWP 11783) exited]
[Thread 0x7fffe8145700 (LWP 11781) exited]
[Inferior 1 (process 11777) exited normally]
/usr/lib/libreoffice/program/gdbtrace:9: Error in sourced command file:
No stack.
quit
This is a new install, libreoffice was segfaulting from the moment I installed it, so I'm unable to check if a package update caused this. I have another install on which Libreoffice works fine.
I already tried reinstalling all the packages mentioned above and switching to infinality-bundle and back to vanilla again.
/Edit: Marking as solved.
Last edited by Malstrond (2013-07-01 16:17:23)Update: Solved it myself. The cause of this problem is the AUR package ttf-ms-win8, specifically the fonts /usr/share/fonts/TTF/segoeui*.ttf.
-
[SOLVED] libreoffice extension pdfimport do not work
I have installed the libreoffice-extension-pdfimport (3.3.2-2). But when I try to open a pdf file nothing happens (no error messages, just nothing). I have tried several pdf files (including ones produced by libreoffice itself). I remember that earlier version of this package did work. Is this package broken? Can anybody of this list use it? I would like to know before filling a bug report.
Update: After having updated my whole system, it works now
Last edited by olive (2011-03-28 18:20:34)Hi,
thanks for help. After lunch I can see the tomcat HP now, the command
$ ss -lnp|grep
tcp LISTEN 0 100 :::8080 :::*
I edit the bashrc to point TOMCAT_JAVA_HOME to the java-sdk-8 - an older forum poster said he changed the bashrc to get sun java permanently. His error messages was caused because TOMCAT_JAVA_HOME pointed to openjdk.
So, my bashrc contains a line:
JAVA_HOME=/usr/lib/jvm/java-8-jdk
I tried according to archwiki on Java:
# archlinux-java status
Available Java environments:
java-8-jdk (default)
# archlinux-java set java-8-sdk
'/usr/lib/jvm/java-8-sdk' is not a valid Java environment path
I am confused ?! -
[Solved] Libreoffice 3.6.1.4 don't start
Hello,
please excuse my bad english.
I have a problem. Since the libreoffice update from 3.5.6 to 3.6.1.4 libreoffice don't start. For a short time i see the splash-screen and that's it. In the terminal, when i type soffice or lowriter or libreoffice --writer i can't see any message. Also i deleted the ~/.config/libreoffice folder. But that doesn't help. These packages are installed: libreoffice-common libreoffice-gnome libreoffice-de libreoffice-writer libreoffice-calc. When i downgrade to 3.5.6 everything is fine.
I have a laptop with openbox and a desktop-pc with gnome. Same problem on both systems.
Do you have any tip for me?
Thanks Michael
Last edited by Süerländer (2012-09-13 07:01:16)Experiencing the same problem here though I found out that the reason for LibreOffice to crash/segfault is the existence of a aquabase-language-support.ttf file which as far as I remember was perfectly accepted in previous versions.
Once I remove it from my .fonts folder LibreOffice loads as it should (no deep testing performed though).
Therefore, in case you are using a .fonts folder on my behalf I would suggest to check out its content (back it up and empty the folder and add the fonts again one by one checking each time if LibreOffice crashes or not until you find which of them may be the reason for the crash). -
[Solved] libreoffice-3.4.1-2 and General Error opening/saving file
I've just done a 'pacman -Syu' and had libreoffice upgraded to version 3.4.1-2.
Now whenever I open a file (new or existing document) or save the file, I get a small window with the meaningless error message:
General Error
However, at least the file can be edited normally and seems to be saved okay in reality.
Anyone else finding this problem?
PS: It happens no matter if I load LibreOffice via the soffice or libreoffice commands; also there are no text messages shown if run from a terminal.
Last edited by ninian (2011-07-07 20:16:19)Thanks to the package maintainers for addressing this bug so quickly.
Just updated rasqal and all seems well with libreoffice now. -
[solved] libreoffice opens in German language not english
Title says it all. Basically libreoffice opens up and all the menus and things are in german so naturally I can't read any of it. Is there any way to change this?
Last edited by SiegeMachine (2011-09-04 23:32:51)You were lucky! I would be okay if mine had opened in German as I can sort of read it, but it opened in some weird language that may as well have been martian! Have you ever tried finding the Settings and Language options in Martian? It isn't fun! In the end I uninstalled and re-installed since I couldn't find an answer. Works fine now.
I can only assume that when I first installed it I must have not noticed that English wasn't the default option. I made sure I selected the right option when I re-installed.
Last edited by RichAustin (2011-09-05 10:12:27) -
[SOLVED] libreoffice not starting context fails to supply singleton
Whenever I start libreoffice it shows this error:
The application cannot be started.
component context fails to supply singleton com.sun.star.deployment.ExtensionManager of type com.sun.star.deployment.XExtensionManager
in a window.
I found this old thread : https://bbs.archlinux.org/viewtopic.php?id=148053
But the latest clucene-2.3.3.4-8 is already installed, and btw I don't have any other language installed on the system:
pacman -Ss libreoffice | grep installed
extra/libcdr 0.1.1-2 [installed]
extra/libreoffice-fresh 4.4.3-1 [installed]
I replaced clucene with clucene-git (just to try) , but instead of the error the application keeps loading and nothing happens,
11801 0.0 0.0 200088 5476 tty1 Sl 14:56 0:00 /usr/lib/libreoffice/program/oosplash --writer
11818 0.2 0.4 876740 72548 tty1 Sl 14:56 0:00 /usr/lib/libreoffice/program/soffice.bin --writer --splash-pipe=5
11829 0.0 0.0 52216 4508 tty1 Sl 14:56 0:00 /usr/lib/libreoffice/program/oosplash --writer
11844 0.0 0.0 52216 4424 tty1 Sl 14:56 0:00 /usr/lib/libreoffice/program/oosplash --writer
It's weird not to find any threads on this which makes me think, am I the only one with this problem?
I'm on LXDE (maybe it's related?)
The system is full up to date.
Last edited by r0b0t (2015-05-28 11:08:10)Ok, this was weird, so:
1) install the git package
2) reinstall clucene and clucene-git will be removed and will work ???
Will see if this works after the reboot -
[Solved]libreoffice signature error during installation
hi,
I was unable to install libreoffice, this is the only package I had problems with. Getting this error:
error: redland: signature from "Andreas Radke <[email protected]>" is invalid
error: redland-storage-virtuoso: signature from "Andreas Radke <[email protected]>" is invalid
error: failed to commit transaction (invalid or corrupted package)
Errors occurred, no packages were upgraded.
Last edited by ottoshmidt (2013-03-21 08:43:06)I had the same error this morning and I found the same solutions on forums about to use pacman-key --init and another instructions. I'll try later your solution. Hope it works
Maybe you are looking for
-
Several of my authorized pc laptops and desktops have completely died over the years, and have no way to deauthorize iTunes on them. Now I am unable to synch purchases on my Iphone to new computer with iTunes because I already have 5 computers author
-
I need to divide a large 111MB PDF
I need to divide a large 111MB PDF into several smaller more manageable pieces. I have CS5 but it won't open it. I just bought PDF Extractor so I could convert it to a Microsoft Word File and edit from there. Message says, file too big, over 100MB. H
-
Can't log into the Mac App Store in 10.6.6 Update
While the app store loads, the sign in screen opens behind the app store application. When i go there to enter my apple ID, etc., it won't let me enter anything. Why is this?
-
Hi Experts, As per my client requirement, If i run the F110 by taking posting upto date in the parameters screen as today i.e.08/12/2011. And i run the proposal and i will got the open items which are due upto now. But as per my client in this list p
-
Spc control chart not showing UCL CL or LCL
Hi people, I have an spc control chart within my app. However for some reason the UCL, CL and LCL aren't showing on my graph. A brief background: This is an app for people entering measurement data into several numberboxes the average of which goes