[solved] loading nvidia module at boot
On wiki there is an simple explanation how to make intel graphics module load with kernel. Now among other things I have cute hi-res vc on my laptop. What is the combination of modules/options to get the same effect with nvidia cards?
I've already tried adding just the nvidia module to kernel, but nothing happened. It's harder to google the solution, since almost all results show people having problems with nvidia card not working at all. Mine is fine, but I want to make it work better
I've got GeForce 7600 GT, package nvidia 180.51-1 for x86_64 (if this makes any difference in this case).
EDIT:
/proc/driver/nvidia/registry
EnableVia4x: 0
EnableALiAGP: 0
NvAGP: 3
ReqAGPRate: 15
EnableAGPSBA: 0
EnableAGPFW: 0
Mobile: 4294967295
ResmanDebugLevel: 4294967295
RmLogonRC: 1
ModifyDeviceFiles: 1
DeviceFileUID: 0
DeviceFileGID: 0
DeviceFileMode: 438
RemapLimit: 0
UpdateMemoryTypes: 4294967295
UseVBios: 1
RMEdgeIntrCheck: 1
UsePageAttributeTable: 4294967295
EnableMSI: 0
MapRegistersEarly: 0
RegistryDwords: ""
should I copy-paste any these parameters to modprobe.conf?
i'm going to experiment a little more. with any luck i'll get the problem solved, but still - any suggestions will be appreciated.
Last edited by tr00per87 (2009-05-15 13:48:01)
you gave me good direction. i got some effect. it isn't perfect, but looks ok.
in final steps it took me two reboots
* first - i've added vga=ask to kernel line and found highest resolution.
in this case it was only 1024x768. "only" because my monitor has native resolution of 1440x900.
teh number in my case is 0x318, which leads me to...
* second - changed vga=ask to vga=0x318. works just fine :]
the funny thing is now during boot on the top of the screen i have not one, but two arch schwags.
look also:
http://bbs.archlinux.org/viewtopic.php?id=25133
http://bbs.archlinux.org/viewtopic.php?id=66108
EDIT:
it appears this effect has nothing to do with loading nvidia module into kernel image. all debianers may sleep well
Last edited by tr00per87 (2009-05-15 15:22:44)
Similar Messages
-
Can't load nvidia module after kernel and nvidia update
After latest kernel (3.6.36.2) and nvidia (260.19.29) upgrade xorg doesn't work. I investigated a little, and that's what I found:
# modprobe nvidia
FATAL: Error inserting nvidia (/lib/modules/2.6.36-ARCH/kernel/drivers/video/nvidia.ko): No such device
I blacklisted nouveau module:
# cat /etc/rc.conf | grep nouveau
MODULES=(b43 vboxdrv !nouveau)
but it didn't help.
Video card:
# lspci | grep VGA
01:00.0 VGA compatible controller: nVidia Corporation G84 [GeForce 8600M GT] (rev a1)Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Linux version 2.6.36-ARCH (tobias@T-POWA-LX) (gcc version 4.5.1 20101125 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Dec 10 20:01:53 UTC 2010
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000dc000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000005fed0000 (usable)
BIOS-e820: 000000005fed0000 - 000000005fee3000 (ACPI NVS)
BIOS-e820: 000000005fee3000 - 0000000060000000 (reserved)
BIOS-e820: 00000000fec00000 - 00000000fec10000 (reserved)
BIOS-e820: 00000000fed00000 - 00000000fed00400 (reserved)
BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved)
BIOS-e820: 00000000fed1c000 - 00000000fed90000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
Notice: NX (Execute Disable) protection missing in CPU or disabled in BIOS!
DMI present.
e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
last_pfn = 0x5fed0 max_arch_pfn = 0x100000
MTRR default type: uncachable
MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
MTRR variable ranges enabled:
0 base 000000000 mask FC0000000 write-back
1 base 040000000 mask FE0000000 write-back
2 base 05FF00000 mask FFFF00000 uncachable
3 disabled
4 disabled
5 disabled
6 disabled
7 disabled
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
Scanning 1 areas for low memory corruption
modified physical RAM map:
modified: 0000000000000000 - 0000000000001000 (reserved)
modified: 0000000000001000 - 0000000000002000 (usable)
modified: 0000000000002000 - 0000000000010000 (reserved)
modified: 0000000000010000 - 000000000009f800 (usable)
modified: 000000000009f800 - 00000000000a0000 (reserved)
modified: 00000000000dc000 - 0000000000100000 (reserved)
modified: 0000000000100000 - 000000005fed0000 (usable)
modified: 000000005fed0000 - 000000005fee3000 (ACPI NVS)
modified: 000000005fee3000 - 0000000060000000 (reserved)
modified: 00000000fec00000 - 00000000fec10000 (reserved)
modified: 00000000fed00000 - 00000000fed00400 (reserved)
modified: 00000000fed14000 - 00000000fed1a000 (reserved)
modified: 00000000fed1c000 - 00000000fed90000 (reserved)
modified: 00000000fee00000 - 00000000fee01000 (reserved)
modified: 00000000ff000000 - 0000000100000000 (reserved)
initial memory mapped : 0 - 01800000
found SMP MP-table at [c00f7bc0] f7bc0
init_memory_mapping: 0000000000000000-00000000377fe000
0000000000 - 0000400000 page 4k
0000400000 - 0037400000 page 2M
0037400000 - 00377fe000 page 4k
kernel direct mapping tables up to 377fe000 @ 15000-1a000
RAMDISK: 37e47000 - 37ff0000
Allocated new RAMDISK: 00100000 - 002a8feb
Move RAMDISK from 0000000037e47000 - 0000000037feffea to 00100000 - 002a8fea
ACPI: RSDP 000f7b40 00024 (v02 Compal)
ACPI: XSDT 5fed8834 0008C (v01 Compal CRESTLNE 06040000 LTP 00000000)
ACPI: FACP 5fedfbd2 000F4 (v03 INTEL CRESTLNE 06040000 ALAN 00000001)
ACPI: DSDT 5fed9b9f 05FBF (v02 Compal CRESTLNE 06040000 INTL 20061109)
ACPI: FACS 5fee2fc0 00040
ACPI: APIC 5fedfcc6 00068 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: HPET 5fedfd2e 00038 (v01 Compal CRESTLNE 06040000 LOHR 0000005A)
ACPI: MCFG 5fedfd66 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
ACPI: TCPA 5fedfda2 00032 (v01 Intel CRESTLNE 06040000 LOHR 0000005A)
ACPI: TMOR 5fedfdd4 00026 (v01 PTLTD 06040000 PTL 00000003)
ACPI: SLIC 5fedfdfa 00176 (v01 Compal CRESTLNE 06040000 TBD 00000001)
ACPI: APIC 5fedff70 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
ACPI: BOOT 5fedffd8 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
ACPI: SSDT 5fed98da 002C5 (v01 SataRe SataAhci 00001000 INTL 20050624)
ACPI: SSDT 5fed8e4c 0025F (v01 PmRef Cpu0Tst 00003000 INTL 20050624)
ACPI: SSDT 5fed8da6 000A6 (v01 PmRef Cpu1Tst 00003000 INTL 20050624)
ACPI: SSDT 5fed88c0 004E6 (v01 PmRef CpuPm 00003000 INTL 20050624)
ACPI: BIOS bug: multiple APIC/MADT found, using 0
ACPI: If "acpi_apic_instance=2" works better, notify [email protected]
ACPI: Local APIC address 0xfee00000
646MB HIGHMEM available.
887MB LOWMEM available.
mapped low ram: 0 - 377fe000
low ram: 0 - 377fe000
Zone PFN ranges:
DMA 0x00000001 -> 0x00001000
Normal 0x00001000 -> 0x000377fe
HighMem 0x000377fe -> 0x0005fed0
Movable zone start PFN for each node
early_node_map[3] active PFN ranges
0: 0x00000001 -> 0x00000002
0: 0x00000010 -> 0x0000009f
0: 0x00000100 -> 0x0005fed0
On node 0 totalpages: 392800
free_area_init_node: node 0, pgdat c142d600, node_mem_map c1598020
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3952 pages, LIFO batch:0
Normal zone: 1744 pages used for memmap
Normal zone: 221486 pages, LIFO batch:31
HighMem zone: 1294 pages used for memmap
HighMem zone: 164292 pages, LIFO batch:31
Using APIC driver default
ACPI: PM-Timer IO Port: 0x1008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
SMP: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
early_res array is doubled to 64 at [16000 - 167ff]
PM: Registered nosave memory: 0000000000002000 - 0000000000010000
PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
PM: Registered nosave memory: 00000000000a0000 - 00000000000dc000
PM: Registered nosave memory: 00000000000dc000 - 0000000000100000
Allocating PCI resources starting at 60000000 (gap: 60000000:9ec00000)
Booting paravirtualized kernel on bare hardware
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 13 pages/cpu @c2400000 s31488 r0 d21760 u2097152
pcpu-alloc: s31488 r0 d21760 u2097152 alloc=1*4194304
pcpu-alloc: [0] 0 1
Built 1 zonelists in Zone order, mobility grouping on. Total pages: 389730
Kernel command line: BOOT_IMAGE=/boot/vmlinuz26 root=/dev/sda2 ro
PID hash table entries: 4096 (order: 2, 16384 bytes)
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Initializing CPU#0
allocated 7858220 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
Subtract (52 early reservations)
#1 [0000001000 - 0000002000] EX TRAMPOLINE
#2 [0001000000 - 000158fe8c] TEXT DATA BSS
#3 [0001590000 - 0001596198] BRK
#4 [00000f7bd0 - 0000100000] BIOS reserved
#5 [00000f7bc0 - 00000f7bd0] MP-table mpf
#6 [000009f800 - 000009fd71] BIOS reserved
#7 [000009ff35 - 00000f7bc0] BIOS reserved
#8 [000009fd71 - 000009ff35] MP-table mpc
#9 [0000010000 - 0000011000] TRAMPOLINE
#10 [0000011000 - 0000015000] ACPI WAKEUP
#11 [0000015000 - 0000016000] PGTABLE
#12 [0000100000 - 00002a9000] NEW RAMDISK
#13 [0001597000 - 0001598000] BOOTMEM
#14 [0001598000 - 0002198000] BOOTMEM
#15 [000158fec0 - 000158fec4] BOOTMEM
#16 [000158ff00 - 000158ffc0] BOOTMEM
#17 [00015961c0 - 0001596214] BOOTMEM
#18 [0002198000 - 000219b000] BOOTMEM
#19 [000158ffc0 - 0001590000] BOOTMEM
#20 [000219b000 - 000219e000] BOOTMEM
#21 [0001596240 - 0001596265] BOOTMEM
#22 [0001596280 - 00015962a7] BOOTMEM
#23 [00015962c0 - 0001596464] BOOTMEM
#24 [0001596480 - 00015964c0] BOOTMEM
#25 [00015964c0 - 0001596500] BOOTMEM
#26 [0001596500 - 0001596540] BOOTMEM
#27 [0001596540 - 0001596580] BOOTMEM
#28 [0001596580 - 00015965c0] BOOTMEM
#29 [00015965c0 - 0001596600] BOOTMEM
#30 [0001596600 - 0001596640] BOOTMEM
#31 [0001596640 - 0001596680] BOOTMEM
#32 [0001596680 - 00015966c0] BOOTMEM
#33 [00015966c0 - 0001596700] BOOTMEM
#34 [0001596700 - 0001596740] BOOTMEM
#35 [0001596740 - 0001596780] BOOTMEM
#36 [0001596780 - 0001596790] BOOTMEM
#37 [00015967c0 - 00015967d0] BOOTMEM
#38 [0001596800 - 000159682d] BOOTMEM
#39 [0001596840 - 000159686d] BOOTMEM
#40 [0002400000 - 000240d000] BOOTMEM
#41 [0002600000 - 000260d000] BOOTMEM
#42 [0001596880 - 0001596884] BOOTMEM
#43 [00015968c0 - 00015968c4] BOOTMEM
#44 [0001596900 - 0001596908] BOOTMEM
#45 [0001596940 - 0001596948] BOOTMEM
#46 [0001596980 - 0001596a28] BOOTMEM
#47 [0001596a40 - 0001596aa8] BOOTMEM
#48 [000219e000 - 00021a2000] BOOTMEM
#49 [00021a2000 - 0002222000] BOOTMEM
#50 [0002222000 - 0002262000] BOOTMEM
#51 [000260d000 - 0002d8b82c] BOOTMEM
Initializing HighMem for node 0 (000377fe:0005fed0)
Memory: 1542868k/1571648k available (3104k kernel code, 28332k reserved, 1205k data, 428k init, 662344k highmem)
virtual kernel memory layout:
fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
.init : 0xc1436000 - 0xc14a1000 ( 428 kB)
.data : 0xc1308056 - 0xc1435820 (1205 kB)
.text : 0xc1000000 - 0xc1308056 (3104 kB)
Checking if this processor honours the WP bit even in supervisor mode...Ok.
SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
Hierarchical RCU implementation.
RCU-based detection of stalled CPUs is disabled.
Verbose stalled-CPUs detection is disabled.
NR_IRQS:512
Extended CMOS year: 2000
Console: colour VGA+ 80x25
console [tty0] enabled
hpet clockevent registered
Fast TSC calibration using PIT
Detected 1795.546 MHz processor.
Calibrating delay loop (skipped), value calculated using timer frequency.. 3592.72 BogoMIPS (lpj=5985153)
pid_max: default: 32768 minimum: 301
Security Framework initialized
TOMOYO Linux initialized
AppArmor: AppArmor disabled by boot time parameter
Mount-cache hash table entries: 512
Initializing cgroup subsys ns
Initializing cgroup subsys cpuacct
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys net_cls
Initializing cgroup subsys blkio
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 6 MCE banks
CPU0: Thermal monitoring handled by SMI
using mwait in idle threads.
Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
PEBS disabled due to CPU errata.
... version: 2
... bit width: 40
... generic registers: 2
... value mask: 000000ffffffffff
... max period: 000000007fffffff
... fixed-purpose events: 3
... event mask: 0000000700000003
ACPI: Core revision 20100702
Enabling APIC mode: Flat. Using 1 I/O APICs
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
CPU0: Intel(R) Core(TM)2 Duo CPU T7100 @ 1.80GHz stepping 0d
NMI watchdog enabled, takes one hw-pmu counter.
Booting Node 0, Processors #1 Ok.
Initializing CPU#1
CPU1: Thermal monitoring handled by SMI
NMI watchdog enabled, takes one hw-pmu counter.
Brought up 2 CPUs
Total of 2 processors activated (7184.34 BogoMIPS).
devtmpfs: initialized
NET: Registered protocol family 16
ACPI: bus type pci registered
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: not using MMCONFIG
PCI: PCI BIOS revision 2.10 entry at 0xfdde1, last bus=14
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: EC: Look up EC in DSDT
ACPI: BIOS _OSI(Linux) query ignored
ACPI: SSDT 5fed95da 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00238 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
ACPI: SSDT 5fed90ab 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 004AA (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
ACPI: SSDT 5fed9812 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 000C8 (v01 PmRef Cpu1Ist 00003000 INTL 20050624)
ACPI: SSDT 5fed9555 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Dynamic OEM Table Load:
ACPI: SSDT (null) 00085 (v01 PmRef Cpu1Cst 00003000 INTL 20050624)
ACPI: Interpreter enabled
ACPI: (supports S0 S3 S4 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
PCI: Using MMCONFIG for extended config space
ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
ACPI: No dock devices found.
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] (ignored)
pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0x60000000-0xdfffffff] (ignored)
pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfebfffff] (ignored)
pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
pci 0000:00:01.0: PME# disabled
pci 0000:00:1a.0: reg 20: [io 0x1800-0x181f]
pci 0000:00:1a.1: reg 20: [io 0x1820-0x183f]
pci 0000:00:1a.7: reg 10: [mem 0xf8404800-0xf8404bff]
pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1a.7: PME# disabled
pci 0000:00:1b.0: reg 10: [mem 0xf8400000-0xf8403fff 64bit]
pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1b.0: PME# disabled
pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.0: PME# disabled
pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.1: PME# disabled
pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.2: PME# disabled
pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.3: PME# disabled
pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.4: PME# disabled
pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
pci 0000:00:1c.5: PME# disabled
pci 0000:00:1d.0: reg 20: [io 0x1840-0x185f]
pci 0000:00:1d.1: reg 20: [io 0x1860-0x187f]
pci 0000:00:1d.2: reg 20: [io 0x1880-0x189f]
pci 0000:00:1d.7: reg 10: [mem 0xf8404c00-0xf8404fff]
pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
pci 0000:00:1d.7: PME# disabled
pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
pci 0000:00:1f.0: quirk: [io 0x1180-0x11bf] claimed by ICH6 GPIO
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 3 PIO at 0068 (mask 0007)
pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 1640 (mask 007f)
pci 0000:00:1f.1: reg 10: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 14: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 18: [io 0x0000-0x0007]
pci 0000:00:1f.1: reg 1c: [io 0x0000-0x0003]
pci 0000:00:1f.1: reg 20: [io 0x18a0-0x18af]
pci 0000:00:1f.2: reg 10: [io 0x18d8-0x18df]
pci 0000:00:1f.2: reg 14: [io 0x18cc-0x18cf]
pci 0000:00:1f.2: reg 18: [io 0x18d0-0x18d7]
pci 0000:00:1f.2: reg 1c: [io 0x18c8-0x18cb]
pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
pci 0000:00:1f.2: reg 24: [mem 0xf8404000-0xf84047ff]
pci 0000:00:1f.2: PME# supported from D3hot
pci 0000:00:1f.2: PME# disabled
pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
pci 0000:01:00.0: reg 10: [mem 0xc6000000-0xc6ffffff]
pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:01:00.0: reg 1c: [mem 0xc4000000-0xc5ffffff 64bit]
pci 0000:01:00.0: reg 24: [io 0x2000-0x207f]
pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:04:00.0: reg 10: [mem 0xf0000000-0xf000ffff 64bit]
pci 0000:04:00.0: PME# supported from D3hot D3cold
pci 0000:04:00.0: PME# disabled
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0c:00.0: reg 10: [mem 0xf8000000-0xf8003fff]
pci 0000:0c:00.0: supports D1 D2
pci 0000:0c:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.5: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:0e:06.0: proprietary Ricoh MMC controller disabled (via firewire function)
pci 0000:0e:06.0: MMC cards are now supported by standard SDHCI controller
pci 0000:0e:06.0: reg 10: [mem 0xf8100000-0xf81007ff]
pci 0000:0e:06.0: supports D1 D2
pci 0000:0e:06.0: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.0: PME# disabled
pci 0000:0e:06.1: reg 10: [mem 0xf8100800-0xf81008ff]
pci 0000:0e:06.1: supports D1 D2
pci 0000:0e:06.1: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.1: PME# disabled
pci 0000:0e:06.2: reg 10: [mem 0xf8101000-0xf81010ff]
pci 0000:0e:06.2: supports D1 D2
pci 0000:0e:06.2: PME# supported from D0 D1 D2 D3hot D3cold
pci 0000:0e:06.2: PME# disabled
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e] (subtractive decode)
pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 *5 6 7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 *7 10 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
HEST: Table is not found!
vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
reserve RAM buffer: 0000000000002000 - 000000000000ffff
reserve RAM buffer: 000000000009f800 - 000000000009ffff
reserve RAM buffer: 000000005fed0000 - 000000005fffffff
NetLabel: Initializing
NetLabel: domain hash size = 128
NetLabel: protocols = UNLABELED CIPSOv4
NetLabel: unlabeled traffic allowed by default
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 14.318180 MHz counter
Switching to clocksource tsc
pnp: PnP ACPI init
ACPI: bus type pnp registered
pnp: PnP ACPI: found 10 devices
ACPI: ACPI bus type pnp unregistered
system 00:01: [mem 0xfed1c000-0xfed1ffff] has been reserved
system 00:01: [mem 0xfed14000-0xfed17fff] has been reserved
system 00:01: [mem 0xfed18000-0xfed18fff] has been reserved
system 00:01: [mem 0xfed19000-0xfed19fff] has been reserved
system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
system 00:01: [mem 0xfed20000-0xfed3ffff] has been reserved
system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
system 00:01: [mem 0xfed45000-0xfed8ffff] has been reserved
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:06: [io 0x0680-0x069f] has been reserved
system 00:06: [io 0x0800-0x080f] has been reserved
system 00:06: [io 0x1000-0x107f] has been reserved
system 00:06: [io 0x1180-0x11bf] has been reserved
system 00:06: [io 0x1640-0x164f] has been reserved
system 00:06: [io 0xfe00] has been reserved
system 00:06: [io 0xff00-0xff7f] has been reserved
pci 0000:00:1c.4: BAR 14: assigned [mem 0x60000000-0x601fffff]
pci 0000:00:1c.4: BAR 15: assigned [mem 0x60200000-0x603fffff 64bit pref]
pci 0000:00:1c.5: BAR 15: assigned [mem 0x60400000-0x605fffff 64bit pref]
pci 0000:00:1c.4: BAR 13: assigned [io 0x7000-0x7fff]
pci 0000:00:1c.5: BAR 13: assigned [io 0x8000-0x8fff]
pci 0000:00:1f.3: BAR 0: assigned [mem 0x60600000-0x606000ff]
pci 0000:00:1f.3: BAR 0: set to [mem 0x60600000-0x606000ff] (PCI address [0x60600000-0x606000ff]
pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x20000)
pci 0000:00:01.0: PCI bridge to [bus 01-01]
pci 0000:00:01.0: bridge window [io 0x2000-0x2fff]
pci 0000:00:01.0: bridge window [mem 0xc4000000-0xc6ffffff]
pci 0000:00:01.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xbc000000-0xbfffffff]
pci 0000:00:1c.0: bridge window [mem 0xcc000000-0xcdffffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 04-04]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf0000000-0xf3ffffff]
pci 0000:00:1c.1: bridge window [mem 0xfa000000-0xfbffffff 64bit pref]
pci 0000:00:1c.2: PCI bridge to [bus 06-06]
pci 0000:00:1c.2: bridge window [io 0x5000-0x5fff]
pci 0000:00:1c.2: bridge window [mem 0xf4000000-0xf7ffffff]
pci 0000:00:1c.2: bridge window [mem 0xfc000000-0xfdffffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 08-08]
pci 0000:00:1c.3: bridge window [io 0x6000-0x6fff]
pci 0000:00:1c.3: bridge window [mem 0xb4000000-0xb7ffffff]
pci 0000:00:1c.3: bridge window [mem 0xc8000000-0xc9ffffff 64bit pref]
pci 0000:00:1c.4: PCI bridge to [bus 0a-0a]
pci 0000:00:1c.4: bridge window [io 0x7000-0x7fff]
pci 0000:00:1c.4: bridge window [mem 0x60000000-0x601fffff]
pci 0000:00:1c.4: bridge window [mem 0x60200000-0x603fffff 64bit pref]
pci 0000:00:1c.5: PCI bridge to [bus 0c-0c]
pci 0000:00:1c.5: bridge window [io 0x8000-0x8fff]
pci 0000:00:1c.5: bridge window [mem 0xf8000000-0xf80fffff]
pci 0000:00:1c.5: bridge window [mem 0x60400000-0x605fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0e-0e]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem 0xf8100000-0xf81fffff]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:01.0: setting latency timer to 64
pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
pci 0000:00:1c.2: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17
pci 0000:00:1c.4: setting latency timer to 64
pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16
pci 0000:00:1c.5: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
pci_bus 0000:01: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:01: resource 1 [mem 0xc4000000-0xc6ffffff]
pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xbc000000-0xbfffffff]
pci_bus 0000:02: resource 2 [mem 0xcc000000-0xcdffffff 64bit pref]
pci_bus 0000:04: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:04: resource 1 [mem 0xf0000000-0xf3ffffff]
pci_bus 0000:04: resource 2 [mem 0xfa000000-0xfbffffff 64bit pref]
pci_bus 0000:06: resource 0 [io 0x5000-0x5fff]
pci_bus 0000:06: resource 1 [mem 0xf4000000-0xf7ffffff]
pci_bus 0000:06: resource 2 [mem 0xfc000000-0xfdffffff 64bit pref]
pci_bus 0000:08: resource 0 [io 0x6000-0x6fff]
pci_bus 0000:08: resource 1 [mem 0xb4000000-0xb7ffffff]
pci_bus 0000:08: resource 2 [mem 0xc8000000-0xc9ffffff 64bit pref]
pci_bus 0000:0a: resource 0 [io 0x7000-0x7fff]
pci_bus 0000:0a: resource 1 [mem 0x60000000-0x601fffff]
pci_bus 0000:0a: resource 2 [mem 0x60200000-0x603fffff 64bit pref]
pci_bus 0000:0c: resource 0 [io 0x8000-0x8fff]
pci_bus 0000:0c: resource 1 [mem 0xf8000000-0xf80fffff]
pci_bus 0000:0c: resource 2 [mem 0x60400000-0x605fffff 64bit pref]
pci_bus 0000:0e: resource 1 [mem 0xf8100000-0xf81fffff]
pci_bus 0000:0e: resource 4 [io 0x0000-0xffff]
pci_bus 0000:0e: resource 5 [mem 0x00000000-0xffffffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
PCI: CLS 64 bytes, default 64
Unpacking initramfs...
Freeing initrd memory: 1700k freed
Simple Boot Flag at 0x38 set to 0x1
apm: BIOS not found.
Scanning for low memory corruption every 60 seconds
audit: initializing netlink socket (disabled)
type=2000 audit(1294159792.419:1): initialized
highmem bounce pool size: 64 pages
HugeTLB registered 4 MB page size, pre-allocated 0 pages
VFS: Disk quotas dquot_6.5.2
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
msgmni has been set to 1723
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler deadline registered
io scheduler cfq registered (default)
intel_idle: MWAIT substates: 0x22220
intel_idle: does not run on family 6 model 15
ERST: Table is not found!
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mice: PS/2 mouse device common for all mice
rtc_cmos 00:07: RTC can wake from S4
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
cpuidle: using governor ladder
cpuidle: using governor menu
TCP cubic registered
NET: Registered protocol family 17
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Resume from disk failed.
registered taskstats version 1
rtc_cmos 00:07: setting system clock to 2011-01-04 16:49:53 UTC (1294159793)
Initalizing network drop monitor service
Freeing unused kernel memory: 428k freed
udev[38]: starting version 165
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
SCSI subsystem initialized
libata version 3.00 loaded.
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
ahci 0000:00:1f.2: irq 40 for MSI/MSI-X
ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf pm led clo pio slum part ccc
ahci 0000:00:1f.2: setting latency timer to 64
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
ata1: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404100 irq 40
ata2: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404180 irq 40
ata3: SATA max UDMA/133 abar m2048@0xf8404000 port 0xf8404200 irq 40
ata_piix 0000:00:1f.1: version 2.13
ata_piix 0000:00:1f.1: PCI INT A -> GSI 19 (level, low) -> IRQ 19
ata_piix 0000:00:1f.1: setting latency timer to 64
scsi3 : ata_piix
scsi4 : ata_piix
ata4: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x18a0 irq 14
ata5: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x18a8 irq 15
ata4.00: ATAPI: Slimtype DVDRW SSM-8515S, GS09, max UDMA/33
ata4.00: configured for UDMA/33
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata3: SATA link down (SStatus 0 SControl 300)
ata1.00: unexpected _GTF length (8)
ata1.00: ATA-8: ST9320423AS, 0002SDM1, max UDMA/133
ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 31/32)
ata1.00: unexpected _GTF length (8)
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA ST9320423AS 0002 PQ: 0 ANSI: 5
scsi 3:0:0:0: CD-ROM Slimtype DVDRW SSM-8515S GS09 PQ: 0 ANSI: 5
sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >
sd 0:0:0:0: [sda] Attached SCSI disk
sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 3:0:0:0: Attached scsi CD-ROM sr0
EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
Not activating Mandatory Access Control now since /sbin/tomoyo-init doesn't exist.
udev[839]: starting version 165
input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input1
ACPI: Lid Switch [LID0]
input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input2
ACPI: Power Button [PWRB]
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
input: PC Speaker as /devices/platform/pcspkr/input/input4
Switching to clocksource hpet
compal-laptop: Identified laptop model 'FL90/IFL90'
cfg80211: Calling CRDA to update world regulatory domain
compal-laptop: Driver 0.2.7 successfully loaded
i801_smbus 0000:00:1f.3: PCI INT C -> GSI 19 (level, low) -> IRQ 19
Linux agpgart interface v0.103
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
iTCO_vendor_support: vendor-support=0
sdhci: Secure Digital Host Controller Interface driver
sdhci: Copyright(c) Pierre Ossman
shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
sdhci-pci 0000:0e:06.1: SDHCI controller found [1180:0822] (rev 22)
sdhci-pci 0000:0e:06.1: PCI INT B -> GSI 23 (level, low) -> IRQ 23
sdhci-pci 0000:0e:06.1: Will use DMA mode even though HW doesn't fully claim to support it.
Registered led device: mmc0::
mmc0: SDHCI controller on PCI [0000:0e:06.1] using DMA
sd 0:0:0:0: Attached scsi generic sg0 type 0
sr 3:0:0:0: Attached scsi generic sg1 type 5
ACPI: Battery Slot [BAT1] (battery present)
ACPI: WMI: Mapper loaded
ACPI: AC Adapter [ACAD] (on-line)
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
acpi device:03: registered as cooling_device2
input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input5
ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
b43-pci-bridge 0000:0c:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
b43-pci-bridge 0000:0c:00.0: setting latency timer to 64
ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x11, vendor 0x4243)
ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x0A, vendor 0x4243)
ssb: Core 2 found: USB 1.1 Host (cc 0x817, rev 0x03, vendor 0x4243)
ssb: Core 3 found: PCI-E (cc 0x820, rev 0x01, vendor 0x4243)
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8404800
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 4 ports detected
ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8404c00
ssb: Sonics Silicon Backplane found on PCI device 0000:0c:00.0
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
firewire_ohci 0000:0e:06.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
iTCO_wdt: Found a ICH8M TCO device (Version=2, TCOBASE=0x1060)
iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
psmouse serio1: ID: 10 00 64
firewire_ohci: Added fw-ohci device 0000:0e:06.0, OHCI v1.10, 4 IR + 4 IT contexts, quirks 0x1
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001800
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001820
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001840
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001860
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001880
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
tg3.c:v3.113 (August 2, 2010)
tg3 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
tg3 0000:04:00.0: setting latency timer to 64
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
usb 1-2: new high speed USB device using ehci_hcd and address 2
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
elantech: assuming hardware version 1, firmware version 2.0.4
tg3 0000:04:00.0: vpd r/w failed. This is likely a firmware bug on this device. Contact the card vendor for a firmware update.
tg3 0000:04:00.0: eth0: Tigon3 [partno(none) rev b002] (PCI Express) MAC address 00:1b:38:55:15:a4
tg3 0000:04:00.0: eth0: attached PHY is 5787 (10/100/1000Base-T Ethernet) (WireSpeed[1])
tg3 0000:04:00.0: eth0: RXcsums[1] LinkChgREG[0] MIirq[0] ASF[0] TSOcap[1]
tg3 0000:04:00.0: eth0: dma_rwctrl[76180000] dma_mask[64-bit]
elantech: Synaptics capabilities query result 0x10, 0x02, 0x64.
HDA Intel 0000:00:1b.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
HDA Intel 0000:00:1b.0: irq 41 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
firewire_core: created device fw0: GUID 00023f79b240229a, S400
b43-phy0: Broadcom 4311 WLAN found (core revision 10)
nvidia: module license 'NVIDIA' taints kernel.
Disabling lock debugging due to kernel taint
phy0: Selected rate control algorithm 'minstrel_ht'
Registered led device: b43-phy0::tx
Registered led device: b43-phy0::rx
Registered led device: b43-phy0::radio
Broadcom 43xx driver loaded [ Features: PMLS, Firmware-ID: FW13 ]
input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
Linux video capture interface: v2.00
uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b018)
input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.7/usb1/1-2/1-2:1.0/input/input8
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v0.1.0)
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: power state changed by ACPI to D0
nvidia 0000:01:00.0: enabling device (0000 -> 0003)
nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: www.nvidia.com.
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda2): re-mounted. Opts: (null)
EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
fuse init (API version 7.15)
Adding 3156768k swap on /dev/sda3. Priority:-1 extents:1 across:3156768k
nvidia 0000:01:00.0: setting latency timer to 64
vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=none,decodes=none:owns=io+mem
NVRM: The NVIDIA GPU 0000:01:00.0 (PCI ID: 10de:0407) installed
NVRM: in this system is not supported by the 260.19.29 NVIDIA Linux
NVRM: graphics driver release. Please see 'Appendix A -
NVRM: Supported NVIDIA GPU Products' in this release's README,
NVRM: available on the Linux graphics driver download page at
NVRM: www.nvidia.com.
nvidia: probe of 0000:01:00.0 failed with error -1
NVRM: The NVIDIA probe routine failed for 1 device(s).
NVRM: None of the NVIDIA graphics adapters were initialized!
last lines looks interesting, but I also checked mentioned Appendix A of README, and I found 8600M GT (PCI ID 0x0407) between supported chips. -
[SOLVED] load VirtualBox modules without root pw
Hi,
i want to write a wrapper script for virtualbox to load the modules when virtualbox starts and unload them when it exits.
is there a way to load those specific modules without root password? i could teach sudo to allow modprobe without password but that would be a security problem.
Last edited by jnhieber (2013-07-13 16:42:19)I'm experiencing some problems with suspend to ram on my x230t. since kernel 3.10 i often get a kernel panic when i suspend.
i use an up to date system (no testing) with linux-ck-ivybridge and intel graphics. i wrote systemd scripts to unload third party modules before suspend (like vboxdrv).
that actually doesn't solve the problem but i thought it might be a good idea if only loading such modules when they are really needed, i don't use virtualbox often.
thanks for the reply, i think this can work. the script can only be changed by root so this would be no security problem.
so this is solved, i'm thinking about a new topic regarding my kernel panics, do you know where to get the kernel logs of the panic?
when i go to suspend the sleep led blinks fast and the screen is blank, so i have to rely on log files. -
Set up systemd with bumblebee. Now Xorg loads nvidia module.
I have the nvidia module blacklisted in /etc/modprobe.d/modprobe.conf.
I have bbswitch set to turn the card off when it loads up using "options bbswitch load_state=0 unload_state=0" in /etc/modprobe.d/modprobe.conf.
I have confirmed that the bbswitch module believes these configuration options are set, and I know that the card is successfully turned off when Bumblebee loads up.
But when I load into my login manager (SLiM), the card gets powered on and the module is loaded up. I don't think bbswitch is involved.
Is there any way to trace exactly which process loads a module?
Is there something simple I'm missing?Thanks for the heads up! But that introduces the problem that I won't be set up for DKMS. Seems like a lose-lose situation with how often Arch updates the kernel. My cheap hack works for now. When I get a chance I may try to get the best of both worlds and build a dkms-nvidia-bumblebee of my own.
-
[SOLVED] Loading Kernel Modules with Options
Hi,
I am trying to load the nf_conntrack_ftp kernel module on boot. I followed the Arch Wiki's article on kernel module loading [0] and created a file in /etc/modules-load.d/ called nf_conntrack_ftp.conf:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
This loads the nf_conntrack_ftp module on boot just fine; unfortunately the module uses the default FTP port (21) and I need it to run on a different port (6621). When I try to dynamically load nf_conntrack_ftp using modprobe nf_conntrack_ftp ports=6621 it loads just fine and according to systools has the port set correctly. However, if I try to set the port anywhere in /etc/modules-load.d/ I always get an error message during boot saying:
Failed to start Load Kernel Modules. See 'systemctl status systemd-modules-load.service' for details.
Looking at the systemctl status message as recommended by the error message on boot doesn't yield anything useful:
systemctl status systemd-modules-load.service wrote:
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: failed (Result: exit-code) since Sun 2014-02-09 16:46:13 EST; 11min ago
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Process: 287 ExecStart=/usr/lib/systemd/systemd-modules-load (code=exited, status=1/FAILURE)
Main PID: 287 (code=exited, status=1/FAILURE)
Feb 09 16:46:13 babylon5 systemd[1]: systemd-modules-load.service: main process exited, code=exited, status=1/FAILURE
Feb 09 16:46:13 babylon5 systemd[1]: Failed to start Load Kernel Modules.
Feb 09 16:46:13 babylon5 systemd[1]: Unit systemd-modules-load.service entered failed state.
I have tried to set the "ports=6621" module option in multiple ways ...
1. As part of the same nf_conntrack_ftp.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:
# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
options nf_conntrack_ftp ports=6621
2. As a separate test.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp
/etc/modules-load.d/test.conf wrote:options nf_conntrack_ftp ports=6621
3. I even tried just adding "ports=6621" to the end of the nf_conntrack_ftp.conf file in /etc/modules-load.d/:
/etc/modules-load.d/nf_conntrack_ftp.conf wrote:# Load the nf_conntrack_ftp kernel module at boot
nf_conntrack_ftp ports=6621
None of these worked. The moment there is "options nf_conntrack_ftp ports=6621" in any file in /etc/modules-load.d/ I get the error message on boot and the kernel module won't get loaded.
What am I missing / doing wrong? Is it not possible to set kernel module parameters on boot? Does nf_conntrack_ftp need to be loaded by the initramfs, i.e. do I need to add the modconf hook to my /etc/mkinitcpio.conf?
Thanks,
Marek
[0] https://wiki.archlinux.org/index.php/Kernel_modules
Last edited by marco1475 (2014-02-09 22:54:26)Raynman wrote:
marco1475 wrote:[0] https://wiki.archlinux.org/index.php/Kernel_modules
Read this again, specifically the section about setting options, paying close attention to directory names.
D'oh! Thanks for pointing that out, what a stupid oversight on my part:
The files that tell the system which kernel modules to load go into /etc/modules-load.d/.
The files that tell the system which parameters to pass to the kernel modules when loading them go into /etc/modprobe.d/.
Now that each file is where it belongs everything works. -
[SOLVED] Loading kernel modules: 'Invalid module foramat'
Hi.
I installed latest driver for my VIA video card. The driver is for Ubuntu and SuSE, but I successfully installed it and the files are at place. I changed the driver in my xorg.conf file and it is working, but I am not able to load 'drm' 'via-chrome9'and 'via-agp' kernel modules. The output message says "Invalid module format". These modules are working on Ubuntu. Is there something I can do to make them work.
Regards.
Last edited by Gruntz (2008-05-02 09:41:07)Gruntz wrote:These modules are working on Ubuntu.
You cannot use packages compiled for Ubuntu's kernel with Arch's kernel. You'd have to recompile it against our kernel -
[SOLVED] [systemd] systed-module-load.service inactive (dead)
Hello archers,
I use VirtualBox and I'm tired of loading modules manually so I figured that a conf file can be created in /etc/modprobe.d/ that will load those modules at boot. Well, easier said than done because it doesn't seem to work.
Here's my virtualbox.conf:
# modules relevant to VirtualBox
vboxdrv
vboxnetadp
vboxnetflt
and here's my systemctl status systemd-modules-load.service:
systemd-modules-load.service - Load Kernel Modules
Loaded: loaded (/usr/lib/systemd/system/systemd-modules-load.service; static)
Active: inactive (dead)
start condition failed at Sun 2013-10-20 09:27:06 CEST; 6s ago
none of the trigger conditions were met
Docs: man:systemd-modules-load.service(8)
man:modules-load.d(5)
Looking forward to hearing from you.
Last edited by robin92 (2013-10-20 11:10:55)robin92 wrote:so I figured that a conf file can be created in /etc/modprobe.d/ that will load those modules at boot.
Why not read the Wiki and follow the instructions?
https://wiki.archlinux.org/index.php/VirtualBox
Last edited by loafer (2013-10-20 08:06:04) -
Xorg cannot find screens with nvidia module
I know that this question is very common, but I cannot find solution,
I should use "nvidia" drivers on Lenovo notebook with two videocards (work with Cuda technology).
Xorg cannot load nvidia module with this xorg.conf. Can anybody help?
Thanks.
lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation 3rd Gen Core processor Graphics Controller (rev 09)
01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [GeForce GT 630M] (rev a1)
xorg.conf:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
# Screen 0 "Screen1" 0 0
# Screen 1 "Screen1" RightOf "Screen0"
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc/"
FontPath "/usr/share/fonts/TTF/"
FontPath "/usr/share/fonts/OTF/"
FontPath "/usr/share/fonts/Type1/"
FontPath "/usr/share/fonts/100dpi/"
FontPath "/usr/share/fonts/75dpi/"
EndSection
Section "Module"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Monitor"
Identifier "Monitor1"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "SWcursor" # [<bool>]
#Option "HWcursor" # [<bool>]
#Option "NoAccel" # [<bool>]
#Option "ShadowFB" # [<bool>]
#Option "UseFBDev" # [<bool>]
#Option "Rotate" # [<str>]
#Option "VideoKey" # <i>
#Option "FlatPanel" # [<bool>]
#Option "FPDither" # [<bool>]
#Option "CrtcNumber" # <i>
#Option "FPScale" # [<bool>]
#Option "FPTweak" # <i>
#Option "DualHead" # [<bool>]
Identifier "Card0"
Driver "nvidia"
BusID "PCI:1:0:0"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz",
### <percent>: "<f>%"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "AccelMethod" # <str>
#Option "Backlight" # <str>
#Option "DRI" # [<bool>]
#Option "ColorKey" # <i>
#Option "VideoKey" # <i>
#Option "Tiling" # [<bool>]
#Option "LinearFramebuffer" # [<bool>]
#Option "SwapbuffersWait" # [<bool>]
#Option "XvPreferOverlay" # [<bool>]
#Option "HotPlug" # [<bool>]
#Option "RelaxedFencing" # [<bool>]
#Option "XvMC" # [<bool>]
#Option "Throttle" # [<bool>]
#Option "ZaphodHeads" # <str>
#Option "DelayedFlush" # [<bool>]
#Option "TearFree" # [<bool>]
#Option "PerCrtcPixmaps" # [<bool>]
#Option "FallbackDebug" # [<bool>]
#Option "DebugFlushBatches" # [<bool>]
#Option "DebugFlushCaches" # [<bool>]
#Option "DebugWait" # [<bool>]
#Option "BufferCache" # [<bool>]
#Option "TripleBuffer" # [<bool>]
Identifier "Card1"
Driver "intel"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 32
# Modes "1366x768"
# EndSubSection
EndSection
Section "Screen"
Identifier "Screen1"
Device "Card1"
Monitor "Monitor1"
SubSection "Display"
Viewport 0 0
Depth 16
Modes "1366x768"
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
Modes "1366x768"
EndSubSection
# SubSection "Display"
# Viewport 0 0
# Depth 32
# Modes "1366x768"
# EndSubSection
EndSection
Xorg.0.log:
[ 27.732]
X.Org X Server 1.13.0
Release Date: 2012-09-05
[ 27.732] X Protocol Version 11, Revision 0
[ 27.732] Build Operating System: Linux 3.6.2-1-ARCH x86_64
[ 27.732] Current Operating System: Linux kot_dymok 3.5.6-1-ARCH #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012 x86_64
[ 27.732] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 27.732] Build Date: 19 October 2012 03:54:56PM
[ 27.732]
[ 27.732] Current version of pixman: 0.26.2
[ 27.732] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 27.732] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 27.732] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Oct 26 01:54:00 2012
[ 27.732] (==) Using config file: "/etc/X11/xorg.conf"
[ 27.732] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 27.732] (==) ServerLayout "X.org Configured"
[ 27.732] (**) |-->Screen "Screen0" (0)
[ 27.732] (**) | |-->Monitor "Monitor0"
[ 27.732] (**) | |-->Device "Card0"
[ 27.732] (**) |-->Input Device "Mouse0"
[ 27.733] (**) |-->Input Device "Keyboard0"
[ 27.733] (==) Automatically adding devices
[ 27.733] (==) Automatically enabling devices
[ 27.733] (==) Automatically adding GPU devices
[ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.733] Entry deleted from font path.
[ 27.733] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 27.733] Entry deleted from font path.
[ 27.733] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 27.733] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 27.733] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 27.733] (WW) Disabling Mouse0
[ 27.733] (WW) Disabling Keyboard0
[ 27.733] (II) Loader magic: 0x7fcc20
[ 27.733] (II) Module ABI versions:
[ 27.733] X.Org ANSI C Emulation: 0.4
[ 27.733] X.Org Video Driver: 13.0
[ 27.733] X.Org XInput driver : 18.0
[ 27.733] X.Org Server Extension : 7.0
[ 27.733] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 27.734] (--) PCI:*(0:0:2:0) 8086:0166:17aa:3901 rev 9, Mem @ 0xd3400000/4194304, 0xe0000000/268435456, I/O @ 0x00004000/64
[ 27.734] (--) PCI: (0:1:0:0) 10de:0de9:17aa:3901 rev 161, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00003000/128, BIOS @ 0x????????/524288
[ 27.734] (II) Open ACPI successful (/var/run/acpid.socket)
[ 27.734] Initializing built-in extension Generic Event Extension
[ 27.734] Initializing built-in extension SHAPE
[ 27.734] Initializing built-in extension MIT-SHM
[ 27.734] Initializing built-in extension XInputExtension
[ 27.734] Initializing built-in extension XTEST
[ 27.734] Initializing built-in extension BIG-REQUESTS
[ 27.734] Initializing built-in extension SYNC
[ 27.734] Initializing built-in extension XKEYBOARD
[ 27.734] Initializing built-in extension XC-MISC
[ 27.734] Initializing built-in extension SECURITY
[ 27.734] Initializing built-in extension XINERAMA
[ 27.734] Initializing built-in extension XFIXES
[ 27.734] Initializing built-in extension RENDER
[ 27.734] Initializing built-in extension RANDR
[ 27.734] Initializing built-in extension COMPOSITE
[ 27.734] Initializing built-in extension DAMAGE
[ 27.734] Initializing built-in extension MIT-SCREEN-SAVER
[ 27.734] Initializing built-in extension DOUBLE-BUFFER
[ 27.734] Initializing built-in extension RECORD
[ 27.734] Initializing built-in extension DPMS
[ 27.735] Initializing built-in extension X-Resource
[ 27.735] Initializing built-in extension XVideo
[ 27.735] Initializing built-in extension XVideo-MotionCompensation
[ 27.735] Initializing built-in extension XFree86-VidModeExtension
[ 27.735] Initializing built-in extension XFree86-DGA
[ 27.735] Initializing built-in extension XFree86-DRI
[ 27.735] Initializing built-in extension DRI2
[ 27.735] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 27.735] (II) LoadModule: "glx"
[ 27.735] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 27.741] (II) Module glx: vendor="NVIDIA Corporation"
[ 27.741] compiled for 4.0.2, module version = 1.0.0
[ 27.741] Module class: X.Org Server Extension
[ 27.741] (II) NVIDIA GLX Module 304.43 Sun Aug 19 20:34:01 PDT 2012
[ 27.741] Loading extension GLX
[ 27.741] (II) LoadModule: "nvidia"
[ 27.741] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.742] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.742] compiled for 4.0.2, module version = 1.0.0
[ 27.742] Module class: X.Org Video Driver
[ 27.815] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 27.815] (EE) NVIDIA: system's kernel log for additional error messages.
[ 27.815] (II) UnloadModule: "nvidia"
[ 27.815] (II) Unloading nvidia
[ 27.815] (EE) Failed to load module "nvidia" (module-specific error, 0)
[ 27.815] (EE) No drivers available.
[ 27.815]
Fatal server error:
[ 27.815] no screens found
[ 27.815] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 27.815] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 27.815] (EE)
dmesg.log
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.5.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 20120721 (prerelease) (GCC) ) #1 SMP PREEMPT Sun Oct 7 19:30:49 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001fffffff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000201fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000020200000-0x0000000040003fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000040004000-0x0000000040004fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000040005000-0x00000000baabefff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000baabf000-0x00000000baebefff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000baebf000-0x00000000bafbefff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000bafbf000-0x00000000baffefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000bafff000-0x00000000baffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000bb000000-0x00000000bf9fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0000000-0x00000000f3ffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000feb00000-0x00000000feb03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb80000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000013f5fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: LENOVO Lenovo G580/Product Name, BIOS 5ECN33WW(V2.03) 06/06/2012
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0x13f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
[ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [mem 0x000fe1b0-0x000fe1bf] mapped at [ffff8800000fe1b0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xbaffffff]
[ 0.000000] [mem 0x00000000-0xbaffffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xbaffffff @ [mem 0x1fa24000-0x1fffffff]
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x13f5fffff]
[ 0.000000] [mem 0x100000000-0x13f5fffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0x13f5fffff @ [mem 0xbaab9000-0xbaabefff]
[ 0.000000] RAMDISK: [mem 0x37a12000-0x37d00fff]
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bafee000 09755 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bafbb000 00040
[ 0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafdf000 01EDD (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000013f5fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x13f5fffff]
[ 0.000000] NODE_DATA [mem 0x13f5fc000-0x13f5fffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x13f5fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009cfff]
[ 0.000000] node 0: [mem 0x00100000-0x1fffffff]
[ 0.000000] node 0: [mem 0x20200000-0x40003fff]
[ 0.000000] node 0: [mem 0x40005000-0xbaabefff]
[ 0.000000] node 0: [mem 0xbafff000-0xbaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x13f5fffff]
[ 0.000000] On node 0 totalpages: 1023564
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3911 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 743679 pages, LIFO batch:31
[ 0.000000] Normal zone: 4056 pages used for memmap
[ 0.000000] Normal zone: 255528 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000baabf000 - 00000000baebf000
[ 0.000000] PM: Registered nosave memory: 00000000baebf000 - 00000000bafbf000
[ 0.000000] PM: Registered nosave memory: 00000000bafbf000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] e820: [mem 0xbfa00000-0xefffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013f200000 s83392 r8192 d23104 u262144
[ 0.000000] pcpu-alloc: s83392 r8192 d23104 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003118
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=fc9d19b7-8701-471d-bf1f-867196c6d392 resume=/dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3947540k/5232640k available (4661k kernel code, 1138384k absent, 146716k reserved, 4191k data, 760k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 2494.278 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.41 BogoMIPS (lpj=8314260)
[ 0.000004] pid_max: default: 32768 minimum: 301
[ 0.000025] Security Framework initialized
[ 0.000028] AppArmor: AppArmor disabled by boot time parameter
[ 0.000250] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001230] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001662] Mount-cache hash table entries: 256
[ 0.001817] Initializing cgroup subsys cpuacct
[ 0.001818] Initializing cgroup subsys memory
[ 0.001825] Initializing cgroup subsys devices
[ 0.001826] Initializing cgroup subsys freezer
[ 0.001827] Initializing cgroup subsys net_cls
[ 0.001828] Initializing cgroup subsys blkio
[ 0.001850] CPU: Physical Processor ID: 0
[ 0.001850] CPU: Processor Core ID: 0
[ 0.001854] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002211] mce: CPU supports 7 MCE banks
[ 0.002221] CPU0: Thermal monitoring enabled (TM1)
[ 0.002227] using mwait in idle threads.
[ 0.003141] ACPI: Core revision 20120320
[ 0.021624] ftrace: allocating 18032 entries in 71 pages
[ 0.029975] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.062936] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.166795] Performance Events: PEBS fmt1+, 16-deep LBR, SandyBridge events, Intel PMU driver.
[ 0.166800] ... version: 3
[ 0.166801] ... bit width: 48
[ 0.166802] ... generic registers: 4
[ 0.166803] ... value mask: 0000ffffffffffff
[ 0.166804] ... max period: 000000007fffffff
[ 0.166804] ... fixed-purpose events: 3
[ 0.166805] ... event mask: 000000070000000f
[ 0.186863] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.200098] Booting Node 0, Processors #1 #2 #3
[ 0.266902] Brought up 4 CPUs
[ 0.266905] Total of 4 processors activated (19962.65 BogoMIPS).
[ 0.269981] devtmpfs: initialized
[ 0.270796] PM: Registering ACPI NVS region [mem 0xbaebf000-0xbafbefff] (1048576 bytes)
[ 0.271536] NET: Registered protocol family 16
[ 0.271635] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.271637] ACPI: bus type pci registered
[ 0.271695] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.271697] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.277539] PCI: Using configuration type 1 for base access
[ 0.277665] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.277666] mtrr: probably your BIOS does not setup all CPUs.
[ 0.277666] mtrr: corrected configuration.
[ 0.277952] bio: create slab <bio-0> at 0
[ 0.277994] ACPI: Added _OSI(Module Device)
[ 0.277995] ACPI: Added _OSI(Processor Device)
[ 0.277996] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.277997] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.279372] ACPI: EC: Look up EC in DSDT
[ 0.280773] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.283353] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.284330] ACPI: SSDT 00000000bae18018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.284681] ACPI: Dynamic OEM Table Load:
[ 0.284683] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.284902] ACPI: SSDT 00000000bae19a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.285275] ACPI: Dynamic OEM Table Load:
[ 0.285277] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.285380] ACPI: SSDT 00000000bae17d98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.285725] ACPI: Dynamic OEM Table Load:
[ 0.285726] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.286579] ACPI: Interpreter enabled
[ 0.286581] ACPI: (supports S0 S3 S4 S5)
[ 0.286600] ACPI: Using IOAPIC for interrupt routing
[ 0.409275] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.409424] ACPI: No dock devices found.
[ 0.409427] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.409682] \_SB_.PCI0:_OSC invalid UUID
[ 0.409683] _OSC request data:1 8 1f
[ 0.409687] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.410085] pci_root PNP0A08:00: >host bridge window [io 0x0000-0x0cf7]
[ 0.410087] pci_root PNP0A08:00: >host bridge window [io 0x0d00-0xffff]
[ 0.410089] pci_root PNP0A08:00: >host bridge window [mem 0x000a0000-0x000bffff]
[ 0.410091] pci_root PNP0A08:00: >host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.410117] PCI host bridge to bus 0000:00
[ 0.410119] pci_bus 0000:00: >root bus resource [io 0x0000-0x0cf7]
[ 0.410121] pci_bus 0000:00: >root bus resource [io 0x0d00-0xffff]
[ 0.410122] pci_bus 0000:00: >root bus resource [mem 0x000a0000-0x000bffff]
[ 0.410123] pci_bus 0000:00: >root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.410131] pci 0000:00:00.0: >[8086:0154] type 00 class 0x060000
[ 0.410164] pci 0000:00:01.0: >[8086:0151] type 01 class 0x060400
[ 0.410192] pci 0000:00:01.0: >PME# supported from D0 D3hot D3cold
[ 0.410210] pci 0000:00:02.0: >[8086:0166] type 00 class 0x030000
[ 0.410220] pci 0000:00:02.0: >reg 10: [mem 0xd3400000-0xd37fffff 64bit]
[ 0.410226] pci 0000:00:02.0: >reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.410231] pci 0000:00:02.0: >reg 20: [io 0x4000-0x403f]
[ 0.410281] pci 0000:00:14.0: >[8086:1e31] type 00 class 0x0c0330
[ 0.410303] pci 0000:00:14.0: >reg 10: [mem 0xd3a00000-0xd3a0ffff 64bit]
[ 0.410373] pci 0000:00:14.0: >PME# supported from D3hot D3cold
[ 0.410396] pci 0000:00:16.0: >[8086:1e3a] type 00 class 0x078000
[ 0.410419] pci 0000:00:16.0: >reg 10: [mem 0xd3a14000-0xd3a1400f 64bit]
[ 0.410494] pci 0000:00:16.0: >PME# supported from D0 D3hot D3cold
[ 0.410528] pci 0000:00:1a.0: >[8086:1e2d] type 00 class 0x0c0320
[ 0.410779] pci 0000:00:1a.0: >reg 10: [mem 0xd3a19000-0xd3a193ff]
[ 0.412197] pci 0000:00:1a.0: >PME# supported from D0 D3hot D3cold
[ 0.412223] pci 0000:00:1b.0: >[8086:1e20] type 00 class 0x040300
[ 0.412237] pci 0000:00:1b.0: >reg 10: [mem 0xd3a10000-0xd3a13fff 64bit]
[ 0.412305] pci 0000:00:1b.0: >PME# supported from D0 D3hot D3cold
[ 0.412329] pci 0000:00:1c.0: >[8086:1e10] type 01 class 0x060400
[ 0.412408] pci 0000:00:1c.0: >PME# supported from D0 D3hot D3cold
[ 0.412433] pci 0000:00:1c.1: >[8086:1e12] type 01 class 0x060400
[ 0.412512] pci 0000:00:1c.1: >PME# supported from D0 D3hot D3cold
[ 0.412546] pci 0000:00:1d.0: >[8086:1e26] type 00 class 0x0c0320
[ 0.412788] pci 0000:00:1d.0: >reg 10: [mem 0xd3a18000-0xd3a183ff]
[ 0.414203] pci 0000:00:1d.0: >PME# supported from D0 D3hot D3cold
[ 0.414230] pci 0000:00:1f.0: >[8086:1e59] type 00 class 0x060100
[ 0.414353] pci 0000:00:1f.2: >[8086:1e03] type 00 class 0x010601
[ 0.414371] pci 0000:00:1f.2: >reg 10: [io 0x4088-0x408f]
[ 0.414379] pci 0000:00:1f.2: >reg 14: [io 0x4094-0x4097]
[ 0.414387] pci 0000:00:1f.2: >reg 18: [io 0x4080-0x4087]
[ 0.414396] pci 0000:00:1f.2: >reg 1c: [io 0x4090-0x4093]
[ 0.414404] pci 0000:00:1f.2: >reg 20: [io 0x4060-0x407f]
[ 0.414412] pci 0000:00:1f.2: >reg 24: [mem 0xd3a17000-0xd3a177ff]
[ 0.414457] pci 0000:00:1f.2: >PME# supported from D3hot
[ 0.414475] pci 0000:00:1f.3: >[8086:1e22] type 00 class 0x0c0500
[ 0.414491] pci 0000:00:1f.3: >reg 10: [mem 0xd3a15000-0xd3a150ff 64bit]
[ 0.414512] pci 0000:00:1f.3: >reg 20: [io 0x4040-0x405f]
[ 0.414568] pci 0000:01:00.0: >[10de:0de9] type 00 class 0x030000
[ 0.414578] pci 0000:01:00.0: >reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.414589] pci 0000:01:00.0: >reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.414600] pci 0000:01:00.0: >reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.414607] pci 0000:01:00.0: >reg 24: [io 0x3000-0x307f]
[ 0.414615] pci 0000:01:00.0: >reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.419807] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.419812] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
[ 0.419816] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
[ 0.419834] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.419945] pci 0000:02:00.0: >[1969:1090] type 00 class 0x020000
[ 0.420065] pci 0000:02:00.0: >reg 10: [mem 0xd3900000-0xd393ffff 64bit]
[ 0.420115] pci 0000:02:00.0: >reg 18: [io 0x2000-0x207f]
[ 0.420574] pci 0000:02:00.0: >PME# supported from D0 D1 D2 D3hot D3cold
[ 0.426507] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.426512] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
[ 0.426516] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
[ 0.426588] pci 0000:03:00.0: >[168c:002b] type 00 class 0x028000
[ 0.426615] pci 0000:03:00.0: >reg 10: [mem 0xd3800000-0xd380ffff 64bit]
[ 0.426744] pci 0000:03:00.0: >supports D1
[ 0.426746] pci 0000:03:00.0: >PME# supported from D0 D1 D3hot
[ 0.433127] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
[ 0.433150] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
[ 0.433170] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.433258] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.433280] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.433313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.433378] \_SB_.PCI0:_OSC invalid UUID
[ 0.433379] _OSC request data:1 1f 1f
[ 0.433382] pci0000:00: >Requesting ACPI _OSC control (0x1d)
[ 0.433416] \_SB_.PCI0:_OSC invalid UUID
[ 0.433417] _OSC request data:1 0 1d
[ 0.433420] pci0000:00: >ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.433421] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.435631] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.435669] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.435705] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.435740] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.435774] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.435809] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.435844] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.435879] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.435945] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.435951] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.435952] vgaarb: loaded
[ 0.435953] vgaarb: bridge control possible 0000:01:00.0
[ 0.435954] vgaarb: no bridge control possible 0000:00:02.0
[ 0.435977] PCI: Using ACPI for IRQ routing
[ 0.437526] PCI: pci_cache_line_size set to 64 bytes
[ 0.437598] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
[ 0.437599] e820: reserve RAM buffer [mem 0x40004000-0x43ffffff]
[ 0.437600] e820: reserve RAM buffer [mem 0xbaabf000-0xbbffffff]
[ 0.437602] e820: reserve RAM buffer [mem 0xbb000000-0xbbffffff]
[ 0.437603] e820: reserve RAM buffer [mem 0x13f600000-0x13fffffff]
[ 0.437671] NetLabel: Initializing
[ 0.437672] NetLabel: domain hash size = 128
[ 0.437673] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.437681] NetLabel: unlabeled traffic allowed by default
[ 0.437696] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.437700] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.439709] Switching to clocksource hpet
[ 0.443743] pnp: PnP ACPI init
[ 0.443758] ACPI: bus type pnp registered
[ 0.444001] pnp 00:00: >[bus 00-3e]
[ 0.444004] pnp 00:00: >[io 0x0000-0x0cf7 window]
[ 0.444005] pnp 00:00: >[io 0x0cf8-0x0cff]
[ 0.444007] pnp 00:00: >[io 0x0d00-0xffff window]
[ 0.444008] pnp 00:00: >[mem 0x000a0000-0x000bffff window]
[ 0.444010] pnp 00:00: >[mem 0x000c0000-0x000c3fff window]
[ 0.444011] pnp 00:00: >[mem 0x000c4000-0x000c7fff window]
[ 0.444012] pnp 00:00: >[mem 0x000c8000-0x000cbfff window]
[ 0.444013] pnp 00:00: >[mem 0x000cc000-0x000cffff window]
[ 0.444015] pnp 00:00: >[mem 0x000d0000-0x000d3fff window]
[ 0.444016] pnp 00:00: >[mem 0x000d4000-0x000d7fff window]
[ 0.444017] pnp 00:00: >[mem 0x000d8000-0x000dbfff window]
[ 0.444019] pnp 00:00: >[mem 0x000dc000-0x000dffff window]
[ 0.444021] pnp 00:00: >[mem 0x000e0000-0x000e3fff window]
[ 0.444023] pnp 00:00: >[mem 0x000e4000-0x000e7fff window]
[ 0.444024] pnp 00:00: >[mem 0x000e8000-0x000ebfff window]
[ 0.444025] pnp 00:00: >[mem 0x000ec000-0x000effff window]
[ 0.444027] pnp 00:00: >[mem 0x000f0000-0x000fffff window]
[ 0.444028] pnp 00:00: >[mem 0xbfa00000-0xfeafffff window]
[ 0.444029] pnp 00:00: >[mem 0x00010000-0x0001ffff window]
[ 0.444084] pnp 00:00: >Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.444094] pnp 00:01: >[io 0x0000-0x001f]
[ 0.444095] pnp 00:01: >[io 0x0081-0x0091]
[ 0.444096] pnp 00:01: >[io 0x0093-0x009f]
[ 0.444097] pnp 00:01: >[io 0x00c0-0x00df]
[ 0.444099] pnp 00:01: >[dma 4]
[ 0.444115] pnp 00:01: >Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.444121] pnp 00:02: >[mem 0xff010000-0xffffffff]
[ 0.444135] pnp 00:02: >Plug and Play ACPI device, IDs INT0800 (active)
[ 0.444191] pnp 00:03: >[mem 0xfed00000-0xfed003ff]
[ 0.444207] pnp 00:03: >Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.444214] pnp 00:04: >[io 0x00f0]
[ 0.444222] pnp 00:04: >[irq 13]
[ 0.444238] pnp 00:04: >Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.444246] pnp 00:05: >[io 0x002e-0x002f]
[ 0.444247] pnp 00:05: >[io 0x004e-0x004f]
[ 0.444248] pnp 00:05: >[io 0x0061]
[ 0.444249] pnp 00:05: >[io 0x0063]
[ 0.444251] pnp 00:05: >[io 0x0065]
[ 0.444252] pnp 00:05: >[io 0x0067]
[ 0.444253] pnp 00:05: >[io 0x0070]
[ 0.444254] pnp 00:05: >[io 0x0080]
[ 0.444255] pnp 00:05: >[io 0x0092]
[ 0.444256] pnp 00:05: >[io 0x00b2-0x00b3]
[ 0.444257] pnp 00:05: >[io 0x0680-0x069f]
[ 0.444259] pnp 00:05: >[io 0x1000-0x100f]
[ 0.444260] pnp 00:05: >[io 0xffff]
[ 0.444261] pnp 00:05: >[io 0xffff]
[ 0.444262] pnp 00:05: >[io 0x0400-0x0453]
[ 0.444263] pnp 00:05: >[io 0x0458-0x047f]
[ 0.444264] pnp 00:05: >[io 0x0500-0x057f]
[ 0.444266] pnp 00:05: >[io 0x164e-0x164f]
[ 0.444267] pnp 00:05: >[io 0xfd60-0xfd63]
[ 0.444300] system 00:05: >[io 0x0680-0x069f] has been reserved
[ 0.444302] system 00:05: >[io 0x1000-0x100f] has been reserved
[ 0.444303] system 00:05: >[io 0xffff] has been reserved
[ 0.444305] system 00:05: >[io 0xffff] has been reserved
[ 0.444306] system 00:05: >[io 0x0400-0x0453] has been reserved
[ 0.444308] system 00:05: >[io 0x0458-0x047f] has been reserved
[ 0.444309] system 00:05: >[io 0x0500-0x057f] has been reserved
[ 0.444311] system 00:05: >[io 0x164e-0x164f] has been reserved
[ 0.444312] system 00:05: >[io 0xfd60-0xfd63] has been reserved
[ 0.444315] system 00:05: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.444322] pnp 00:06: >[io 0x0070-0x0077]
[ 0.444327] pnp 00:06: >[irq 8]
[ 0.444341] pnp 00:06: >Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.444360] pnp 00:07: >[io 0x0454-0x0457]
[ 0.444385] system 00:07: >[io 0x0454-0x0457] has been reserved
[ 0.444387] system 00:07: >Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.444394] pnp 00:08: >[io 0x0060]
[ 0.444396] pnp 00:08: >[io 0x0064]
[ 0.444400] pnp 00:08: >[irq 1]
[ 0.444416] pnp 00:08: >Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.444460] pnp 00:09: >[irq 12]
[ 0.444479] pnp 00:09: >Plug and Play ACPI device, IDs ETD0613 ETD0001 PNP0f13 (active)
[ 0.503108] pnp 00:0a: >[mem 0xfed1c000-0xfed1ffff]
[ 0.503110] pnp 00:0a: >[mem 0xfed10000-0xfed17fff]
[ 0.503111] pnp 00:0a: >[mem 0xfed18000-0xfed18fff]
[ 0.503113] pnp 00:0a: >[mem 0xfed19000-0xfed19fff]
[ 0.503114] pnp 00:0a: >[mem 0xf0000000-0xf3ffffff]
[ 0.503115] pnp 00:0a: >[mem 0xfed20000-0xfed3ffff]
[ 0.503116] pnp 00:0a: >[mem 0xfed90000-0xfed93fff]
[ 0.503117] pnp 00:0a: >[mem 0xff000000-0xff000fff]
[ 0.503119] pnp 00:0a: >[mem 0xff010000-0xffffffff]
[ 0.503120] pnp 00:0a: >[mem 0xfee00000-0xfeefffff]
[ 0.503121] pnp 00:0a: >[mem 0xbfa00000-0xbfa00fff]
[ 0.503153] system 00:0a: >[mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.503154] system 00:0a: >[mem 0xfed10000-0xfed17fff] has been reserved
[ 0.503156] system 00:0a: >[mem 0xfed18000-0xfed18fff] has been reserved
[ 0.503159] system 00:0a: >[mem 0xfed19000-0xfed19fff] has been reserved
[ 0.503161] system 00:0a: >[mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.503162] system 00:0a: >[mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.503164] system 00:0a: >[mem 0xfed90000-0xfed93fff] has been reserved
[ 0.503165] system 00:0a: >[mem 0xff000000-0xff000fff] has been reserved
[ 0.503167] system 00:0a: >[mem 0xff010000-0xffffffff] could not be reserved
[ 0.503169] system 00:0a: >[mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.503170] system 00:0a: >[mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.503173] system 00:0a: >Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.503426] pnp 00:0b: >[mem 0x20000000-0x201fffff]
[ 0.503428] pnp 00:0b: >[mem 0x40004000-0x40004fff]
[ 0.503467] system 00:0b: >[mem 0x20000000-0x201fffff] has been reserved
[ 0.503469] system 00:0b: >[mem 0x40004000-0x40004fff] has been reserved
[ 0.503471] system 00:0b: >Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.503484] pnp: PnP ACPI: found 12 devices
[ 0.503485] ACPI: ACPI bus type pnp unregistered
[ 0.509719] pci 0000:01:00.0: >no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.509749] pci 0000:01:00.0: >BAR 6: assigned [mem 0xd3000000-0xd307ffff pref]
[ 0.509751] pci 0000:00:01.0: >PCI bridge to [bus 01-01]
[ 0.509753] pci 0000:00:01.0: > bridge window [io 0x3000-0x3fff]
[ 0.509756] pci 0000:00:01.0: > bridge window [mem 0xd2000000-0xd30fffff]
[ 0.509758] pci 0000:00:01.0: > bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.509761] pci 0000:00:1c.0: >PCI bridge to [bus 02-02]
[ 0.509764] pci 0000:00:1c.0: > bridge window [io 0x2000-0x2fff]
[ 0.509769] pci 0000:00:1c.0: > bridge window [mem 0xd3900000-0xd39fffff]
[ 0.509778] pci 0000:00:1c.1: >PCI bridge to [bus 03-03]
[ 0.509783] pci 0000:00:1c.1: > bridge window [mem 0xd3800000-0xd38fffff]
[ 0.509815] pci_bus 0000:00: >resource 4 [io 0x0000-0x0cf7]
[ 0.509816] pci_bus 0000:00: >resource 5 [io 0x0d00-0xffff]
[ 0.509818] pci_bus 0000:00: >resource 6 [mem 0x000a0000-0x000bffff]
[ 0.509819] pci_bus 0000:00: >resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.509821] pci_bus 0000:01: >resource 0 [io 0x3000-0x3fff]
[ 0.509822] pci_bus 0000:01: >resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.509824] pci_bus 0000:01: >resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.509825] pci_bus 0000:02: >resource 0 [io 0x2000-0x2fff]
[ 0.509827] pci_bus 0000:02: >resource 1 [mem 0xd3900000-0xd39fffff]
[ 0.509828] pci_bus 0000:03: >resource 1 [mem 0xd3800000-0xd38fffff]
[ 0.509849] NET: Registered protocol family 2
[ 0.509940] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.510462] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.511934] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.512121] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.512123] TCP: reno registered
[ 0.512131] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.512148] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.512215] NET: Registered protocol family 1
[ 0.512227] pci 0000:00:02.0: >Boot video device
[ 0.539686] PCI: CLS 64 bytes, default 64
[ 0.539720] Unpacking initramfs...
[ 0.587463] Freeing initrd memory: 3004k freed
[ 0.587782] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.587786] software IO TLB [mem 0xb6ab9000-0xbaab8fff] (64MB) mapped at [ffff8800b6ab9000-ffff8800baab8fff]
[ 0.587808] Simple Boot Flag at 0x44 set to 0x1
[ 0.588188] audit: initializing netlink socket (disabled)
[ 0.588201] type=2000 audit(1351239412.473:1): initialized
[ 0.598216] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.599469] VFS: Disk quotas dquot_6.5.2
[ 0.599501] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.599601] msgmni has been set to 7715
[ 0.599760] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.599785] io scheduler noop registered
[ 0.599786] io scheduler deadline registered
[ 0.599824] io scheduler cfq registered (default)
[ 0.599901] pcieport 0000:00:01.0: >irq 40 for MSI/MSI-X
[ 0.600058] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.600059] vesafb: scrolling: redraw
[ 0.600061] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.600464] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 4160k, total 4160k
[ 0.667429] Console: switching to colour frame buffer device 170x48
[ 0.734140] fb0: VESA VGA frame buffer device
[ 0.734147] intel_idle: does not run on family 6 model 58
[ 0.734170] GHES: HEST is not enabled!
[ 0.734209] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.734579] Linux agpgart interface v0.103
[ 0.734634] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS4] at 0x60,0x64 irq 1,12
[ 0.748568] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.748578] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.748663] mousedev: PS/2 mouse device common for all mice
[ 0.748692] rtc_cmos 00:06: >RTC can wake from S4
[ 0.748829] rtc_cmos 00:06: >rtc core: registered rtc_cmos as rtc0
[ 0.748861] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 0.748868] cpuidle: using governor ladder
[ 0.748870] cpuidle: using governor menu
[ 0.748966] drop_monitor: Initializing network drop monitor service
[ 0.749023] TCP: cubic registered
[ 0.749094] NET: Registered protocol family 10
[ 0.749220] NET: Registered protocol family 17
[ 0.749227] Key type dns_resolver registered
[ 0.749314] PM: Checking hibernation image partition /dev/disk/by-uuid/007e49dc-18dc-442a-89c8-ab927e6a17ff
[ 0.762323] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.775385] PM: Hibernation image not present or could not be loaded.
[ 0.775393] registered taskstats version 1
[ 0.775839] rtc_cmos 00:06: >setting system clock to 2012-10-26 08:16:53 UTC (1351239413)
[ 0.776874] Freeing unused kernel memory: 760k freed
[ 0.776957] Write protecting the kernel read-only data: 8192k
[ 0.780137] Freeing unused kernel memory: 1472k freed
[ 0.781606] Freeing unused kernel memory: 608k freed
[ 0.787240] systemd-udevd[47]: starting version 194
[ 0.813888] ACPI: bus type usb registered
[ 0.813910] usbcore: registered new interface driver usbfs
[ 0.813918] usbcore: registered new interface driver hub
[ 0.813955] usbcore: registered new device driver usb
[ 0.815211] SCSI subsystem initialized
[ 0.816356] libata version 3.00 loaded.
[ 0.816442] xhci_hcd 0000:00:14.0: >setting latency timer to 64
[ 0.816447] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.816456] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 1
[ 0.816560] xhci_hcd 0000:00:14.0: >cache line size of 64 is not supported
[ 0.816578] xhci_hcd 0000:00:14.0: >irq 21, io mem 0xd3a00000
[ 0.816632] xhci_hcd 0000:00:14.0: >irq 41 for MSI/MSI-X
[ 0.816791] xHCI xhci_add_endpoint called for root hub
[ 0.816793] xHCI xhci_check_bandwidth called for root hub
[ 0.816874] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.816904] hub 1-0:1.0: >USB hub found
[ 0.816914] hub 1-0:1.0: >4 ports detected
[ 0.817280] xhci_hcd 0000:00:14.0: >xHCI Host Controller
[ 0.817286] xhci_hcd 0000:00:14.0: >new USB bus registered, assigned bus number 2
[ 0.817469] xHCI xhci_add_endpoint called for root hub
[ 0.817471] xHCI xhci_check_bandwidth called for root hub
[ 0.817493] hub 2-0:1.0: >USB hub found
[ 0.817500] hub 2-0:1.0: >4 ports detected
[ 0.822755] ehci_hcd 0000:00:1a.0: >setting latency timer to 64
[ 0.822761] ehci_hcd 0000:00:1a.0: >EHCI Host Controller
[ 0.822768] ehci_hcd 0000:00:1a.0: >new USB bus registered, assigned bus number 3
[ 0.822798] ehci_hcd 0000:00:1a.0: >debug port 2
[ 0.826690] ehci_hcd 0000:00:1a.0: >cache line size of 64 is not supported
[ 0.826709] ehci_hcd 0000:00:1a.0: >irq 16, io mem 0xd3a19000
[ 0.835913] ehci_hcd 0000:00:1a.0: >USB 2.0 started, EHCI 1.00
[ 0.836049] hub 3-0:1.0: >USB hub found
[ 0.836052] hub 3-0:1.0: >2 ports detected
[ 0.836166] ehci_hcd 0000:00:1d.0: >setting latency timer to 64
[ 0.836170] ehci_hcd 0000:00:1d.0: >EHCI Host Controller
[ 0.836177] ehci_hcd 0000:00:1d.0: >new USB bus registered, assigned bus number 4
[ 0.836203] ehci_hcd 0000:00:1d.0: >debug port 2
[ 0.840097] ehci_hcd 0000:00:1d.0: >cache line size of 64 is not supported
[ 0.840110] ehci_hcd 0000:00:1d.0: >irq 23, io mem 0xd3a18000
[ 0.849231] ehci_hcd 0000:00:1d.0: >USB 2.0 started, EHCI 1.00
[ 0.849353] hub 4-0:1.0: >USB hub found
[ 0.849356] hub 4-0:1.0: >2 ports detected
[ 0.849406] ahci 0000:00:1f.2: >version 3.0
[ 0.849473] ahci 0000:00:1f.2: >irq 42 for MSI/MSI-X
[ 0.849524] ahci: SSS flag set, parallel bus scan disabled
[ 0.862579] ahci 0000:00:1f.2: >AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x5 impl SATA mode
[ 0.862582] ahci 0000:00:1f.2: >flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 0.862586] ahci 0000:00:1f.2: >setting latency timer to 64
[ 0.869649] scsi0 : ahci
[ 0.869722] scsi1 : ahci
[ 0.869780] scsi2 : ahci
[ 0.869834] scsi3 : ahci
[ 0.869889] scsi4 : ahci
[ 0.869943] scsi5 : ahci
[ 0.870010] ata1: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17100 irq 42
[ 0.870011] ata2: DUMMY
[ 0.870014] ata3: SATA max UDMA/133 abar m2048@0xd3a17000 port 0xd3a17200 irq 42
[ 0.870015] ata4: DUMMY
[ 0.870016] ata5: DUMMY
[ 0.870016] ata6: DUMMY
[ 1.142189] usb 3-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.188798] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.242364] ata1.00: ATA-8: ST9500325AS, 0011LVM1, max UDMA/100
[ 1.242367] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.244122] ata1.00: configured for UDMA/100
[ 1.244233] scsi 0:0:0:0: >Direct-Access ATA ST9500325AS 0011 PQ: 0 ANSI: 5
[ 1.265963] hub 3-1:1.0: >USB hub found
[ 1.266053] hub 3-1:1.0: >6 ports detected
[ 1.371886] usb 4-1: >new high-speed USB device number 2 using ehci_hcd
[ 1.495531] hub 4-1:1.0: >USB hub found
[ 1.495628] hub 4-1:1.0: >6 ports detected
[ 1.561668] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.561806] usb 3-1.3: >new full-speed USB device number 3 using ehci_hcd
[ 1.566490] ata3.00: ATAPI: PLDS DVD-RW DS8A8SH, KL31, max UDMA/100
[ 1.567395] ata3.00: configured for UDMA/100
[ 1.569763] scsi 2:0:0:0: >CD-ROM PLDS DVD-RW DS8A8SH KL31 PQ: 0 ANSI: 5
[ 1.572713] sd 0:0:0:0: >[sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
[ 1.572771] sd 0:0:0:0: >[sda] Write Protect is off
[ 1.572774] sd 0:0:0:0: >[sda] Mode Sense: 00 3a 00 00
[ 1.572806] sd 0:0:0:0: >[sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.579557] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.579561] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.579683] sr 2:0:0:0: >Attached scsi CD-ROM sr0
[ 1.588282] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.588300] Switching to clocksource tsc
[ 1.646147] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 >
[ 1.646510] sd 0:0:0:0: >[sda] Attached SCSI disk
[ 1.711612] usb 3-1.4: >new high-speed USB device number 4 using ehci_hcd
[ 1.861415] usb 4-1.6: >new high-speed USB device number 3 using ehci_hcd
[ 3.905748] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
[ 6.297029] systemd-udevd[165]: starting version 194
[ 6.879435] ACPI: Requesting acpi_cpufreq
[ 6.901533] Monitor-Mwait will be used to enter C-1 state
[ 6.901538] Monitor-Mwait will be used to enter C-2 state
[ 6.901542] ACPI: acpi_idle registered with cpuidle
[ 7.242423] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input1
[ 7.242428] ACPI: Power Button [PWRB]
[ 7.243055] ACPI: AC Adapter [ACAD] (on-line)
[ 7.243224] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input2
[ 7.243227] ACPI: Sleep Button [SLPB]
[ 7.243264] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input3
[ 7.243282] ACPI: Lid Switch [LID0]
[ 7.243312] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 7.243314] ACPI: Power Button [PWRF]
[ 7.250773] thermal LNXTHERM:00: >registered as thermal_zone0
[ 7.250778] ACPI: Thermal Zone [TZ00] (54 C)
[ 7.450794] ACPI: Battery Slot [BAT1] (battery present)
[ 7.582945] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612108] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612381] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612637] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 7.612948] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 7.634516] input: Ideapad extra buttons as /devices/platform/ideapad/input/input5
[ 7.648434] Compat-wireless backport release: compat-wireless-v3.6-rc6-1-npc
[ 7.648436] Backport based on linux-stable.git v3.6-rc6
[ 7.648436] compat.git: linux-stable.git
[ 7.734886] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120320/utaddress-251)
[ 7.734890] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734893] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \GPIO 1 (20120320/utaddress-251)
[ 7.734896] ACPI Warning: 0x0000000000000500-0x000000000000053f SystemIO conflicts with Region \_SB_.PCI0.PEG0.PEGP.GPIO 2 (20120320/utaddress-251)
[ 7.734898] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 7.734899] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 7.737294] mei 0000:00:16.0: >setting latency timer to 64
[ 7.737362] mei 0000:00:16.0: >irq 43 for MSI/MSI-X
[ 7.743686] mei 0000:00:16.0: >wd: failed to find the client
[ 7.757142] agpgart-intel 0000:00:00.0: >Intel Ivybridge Chipset
[ 7.757223] agpgart-intel 0000:00:00.0: >detected gtt size: 2097152K total, 262144K mappable
[ 7.758105] agpgart-intel 0000:00:00.0: >detected 65536K stolen memory
[ 7.758213] agpgart-intel 0000:00:00.0: >AGP aperture is 256M @ 0xe0000000
[ 7.972440] Qualcomm Atheros(R) AR813x/AR815x/AR816x PCI-E Ethernet Network Driver
[ 7.972474] alx 0000:02:00.0: >DMA to 64-BIT addresses
[ 7.972555] alx 0000:02:00.0: >(unregistered net_device): HW Flags = 0x15
[ 7.973019] alx 0000:02:00.0: >(unregistered net_device): reset PHY, pws = 1, az = 0, ptp = 0
[ 7.974361] alx 0000:02:00.0: >(unregistered net_device): speed = 0x2f, autoneg = 1
[ 7.975707] alx 0000:02:00.0: >irq 44 for MSI/MSI-X
[ 7.975824] alx: Atheros Gigabit Network Connection
[ 7.977650] snd_hda_intel 0000:00:1b.0: >irq 45 for MSI/MSI-X
[ 8.008080] [drm] Initialized drm 1.1.0 20060810
[ 8.066122] iTCO_vendor_support: vendor-support=0
[ 8.075437] rts5139: module is from the staging directory, the quality is unknown, you have been warned.
[ 8.078855] scsi6 : SCSI emulation for RTS5139 USB card reader
[ 8.078971] scsi 6:0:0:0: >Direct-Access Generic- xD/SD/M.S. 1.00 PQ: 0 ANSI: 0 CCS
[ 8.080194] sd 6:0:0:0: >[sdb] Attached SCSI removable disk
[ 8.080898] usbcore: registered new interface driver rts5139
[ 8.166428] cfg80211: Calling CRDA to update world regulatory domain
[ 8.175247] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 8.175288] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 8.175343] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 8.188460] Linux media interface: v0.10
[ 8.307532] Linux video capture interface: v2.00
[ 8.337832] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (04f2:b2e2)
[ 8.339661] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb4/4-1/4-1.6/4-1.6:1.0/input/input6
[ 8.339707] usbcore: registered new interface driver uvcvideo
[ 8.339708] USB Video Class driver (1.1.1)
[ 8.477762] Bluetooth: Core ver 2.16
[ 8.477776] NET: Registered protocol family 31
[ 8.477777] Bluetooth: HCI device and connection manager initialized
[ 8.477779] Bluetooth: HCI socket layer initialized
[ 8.477780] Bluetooth: L2CAP socket layer initialized
[ 8.477784] Bluetooth: SCO socket layer initialized
[ 8.491954] usbcore: registered new interface driver btusb
[ 8.639211] hda_codec: CX20590: BIOS auto-probing.
[ 8.640020] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 8.672690] psmouse serio1: >elantech: assuming hardware version 3 (with firmware version 0x450f02)
[ 8.697264] psmouse serio1: >elantech: Synaptics capabilities query result 0x78, 0x17, 0x0b.
[ 8.709692] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
[ 8.709766] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
[ 8.709813] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
[ 8.710242] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120320/utaddress-251)
[ 8.710247] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 8.710479] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 8.710481] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 8.710502] Console: switching to colour dummy device 80x25
[ 8.710580] i915 0000:00:02.0: >setting latency timer to 64
[ 8.744483] i915 0000:00:02.0: >irq 46 for MSI/MSI-X
[ 8.744490] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 8.744491] [drm] Driver supports precise vblank timestamp query.
[ 8.745029] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 8.745030] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 8.825185] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input11
[ 9.132101] nvidia: disagrees about version of symbol module_layout
[ 9.243757] usbcore: registered new interface driver ath3k
[ 9.265032] usb 3-1.3: >USB disconnect, device number 3
[ 9.265920] systemd-udevd[329]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh --remove 189 258': No such file or directory
[ 9.273016] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 9.400084] ath: EEPROM regdomain: 0x65
[ 9.400085] ath: EEPROM indicates we should expect a direct regpair map
[ 9.400087] ath: Country alpha2 being used: 00
[ 9.400088] ath: Regpair used: 0x65
[ 9.421060] fbcon: inteldrmfb (fb0) is primary device
[ 9.487637] ieee80211 phy0: >Selected rate control algorithm 'ath9k_rate_control'
[ 9.487781] Registered led device: ath9k-phy0
[ 9.487785] ieee80211 phy0: >Atheros AR9285 Rev:2 mem=0xffffc900050e0000, irq=17
[ 9.552614] kvm: disabled by bios
[ 9.556577] kvm: disabled by bios
[ 9.601270] Console: switching to colour frame buffer device 170x48
[ 9.602975] fb0: inteldrmfb frame buffer device
[ 9.602976] drm: registered panic notifier
[ 9.603101] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 9.605310] acpi device:38: >registered as cooling_device4
[ 9.605524] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 9.605938] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:36/LNXVIDEO:00/input/input12
[ 9.611483] acpi device:44: >registered as cooling_device5
[ 9.611810] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 9.611971] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input13
[ 9.612048] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.960891] usb 3-1.3: >new full-speed USB device number 5 using ehci_hcd
[ 10.048160] systemd-udevd[343]: failed to execute '/opt/VirtualBox/VBoxCreateUSBNode.sh' '/opt/VirtualBox/VBoxCreateUSBNode.sh 189 260 e0': No such file or directory
[ 11.761061] EXT4-fs (sda7): re-mounted. Opts: data=ordered
[ 11.956330] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 12.074341] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: data=ordered
[ 12.321742] fuse init (API version 7.19)
[ 12.703502] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: (null)
[ 12.770085] EXT4-fs (sda3): mounted filesystem with ordered data mode. Opts: (null)
[ 12.840886] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 12.906640] Adding 16016768k swap on /dev/sda6. Priority:-1 extents:1 across:16016768k
I'm sorry for my English.
Last edited by Kot Dymok (2012-10-26 08:29:53)I don't see any messages of loading nvidia ("NVRM") or nouveau. Are you sure that you have installed a module that is compatible with your current kernel?
You'll also need to patch your ACPI handle or the nouveau/nvidia driver will refuse to load at all, see https://github.com/Bumblebee-Project/bbswitch/issues/2 (this is specific to some machines, your Lenovo G580 machine included)
Last edited by Lekensteyn (2012-10-29 14:52:55) -
I recently had a problem using a new keyboard https://bbs.archlinux.org/viewtopic.php?id=127265
My solution was to get a list of loaded modules that were loaded when I boot from a USB distro that worked with the keyboard, and compare it to the list of modules I was loading in Arch. Then I blacklisted all of the arch modules that didn't overlap with my other linux, and specifically loaded the modules that were in the other distro.
Now to figure out exactly which module was causing the conflict or failing to load will take some time and effort.
This got me thinking, are there any tools to help with isolating problem modules? Either from the bootloader, a setting in modprobe.d or something else?
Features I'm thinking of are:
bootloader options
1. boot with the bare minimum modules
2. prompt at boot before loading each module
already booted:
1. something that would unload a module, wait N seconds for the user to confirm it's ok, and if the user does not confirm, reload the module. Similar to what happens when you change your display settings and it reverts to the old settings if the user doesn't give any input.
2. something similar for loading new modules, but I can't really imagine it at the moment.
I guess that's all that comes to mind for now, but something like this would be very useful:
1. would make it faster to isolate problems
2. would reduce error, because isolation requires a very disciplined approach to make sure you don't miss a combo.
So ya, does anything like that exist?bender02 wrote:If you use initramfs (which you have to if you use the default kernel), then the modules might be loaded as early as from there. If this is the case, remove the modules and [EDIT: optionally have a look at /etc/mkinitcpio.conf] and rebuild you initramfs (mkinitcpio -p kernel26).
I reverted my /lib/udev/load-modules.sh back to what it was before and somehow it 'fixed' it? According to everything I've seen, load-modules.sh should only really be effective if you have MOD_AUTOLOAD="on".
I've got MOD_AUTOLOAD="off" but the contents of load-modules.sh still matter apparently... I'm confused... I'd still like to shorten my load-modules.sh to what the first link has (no support for blacklisting, but I'm manually loading my modules anyways...) but I guess I can like with this... -
Cannot load nvidia driver module [SOLVED]
OK so for some reason I can no longer load the nvidia (proprietary) driver.
I have a laptop with optimus, on board intel and discrete nvidia GTX680M. I use this laptop for cuda development so I don't care about games etc, I just need the driver loaded to debug and run my cuda apps. bbswitch still works fine as does bumblebee which I don't use normally but I do have it setup and running in case. Also I didn't really work much on coding last week so not sure exactly when this started.
So here is what happens when I try to insert the nvidia module or use optirun:
$ sudo modprobe nvidia
modprobe: ERROR: could not insert 'nvidia': No such device
$ sudo insmod nvidia
insmod: ERROR: could not load module nvidia: No such file or directory
$ optirun -vv glxspheres
[ 27.485342] [DEBUG]Reading file: /etc/bumblebee/bumblebee.conf
[ 27.485506] [INFO]Configured driver: nvidia
[ 27.485635] [DEBUG]optirun version 3.2.1 starting...
[ 27.485642] [DEBUG]Active configuration:
[ 27.485645] [DEBUG] bumblebeed config file: /etc/bumblebee/bumblebee.conf
[ 27.485662] [DEBUG] X display: :8
[ 27.485674] [DEBUG] LD_LIBRARY_PATH: /usr/lib/nvidia:/usr/lib32/nvidia
[ 27.485676] [DEBUG] Socket path: /var/run/bumblebee.socket
[ 27.485679] [DEBUG] Accel/display bridge: primus
[ 27.485681] [DEBUG] VGL Compression: xv
[ 27.485684] [DEBUG] VGLrun extra options:
[ 27.485686] [DEBUG] Primus LD Path: /usr/lib:/usr/lib32
[ 27.560627] [INFO]Response: No - error: Could not load GPU driver
[ 27.560647] [ERROR]Cannot access secondary GPU - error: Could not load GPU driver
[ 27.560651] [DEBUG]Socket closed.
[ 27.560666] [ERROR]Aborting because fallback start is disabled.
[ 27.560671] [DEBUG]Killing all remaining processes.
I don't have an xorg file for the intel gpu.
device nodes are created:
$ ls /dev/ | grep nv
crw-rw-rw- 1 root root 195, 0 Sep 24 14:58 nvidia0
crw-rw-rw- 1 root root 195, 255 Sep 24 14:58 nvidiactl
log info:
$cat /var/log/Xorg.0.log | grep EE
[ 3.385] Current Operating System: Linux gpumonster 3.11.1-1-ARCH #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013 x86_64
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.299] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.308] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 4.308] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 4.309] (EE) Failed to load module "fbdev" (module does not exist, 0)
$ cat /var/log/Xorg.8.log
[ 11367.762]
X.Org X Server 1.14.3
Release Date: 2013-09-12
[ 11367.762] X Protocol Version 11, Revision 0
[ 11367.762] Build Operating System: Linux 3.11.0-1-ARCH x86_64
[ 11367.762] Current Operating System: Linux gpumonster 3.11.1-1-ARCH #1 SMP PREEMPT Sat Sep 14 19:30:21 CEST 2013 x86_64
[ 11367.762] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=1c3a736e-6aab-45e1-a9ad-5d2f6195cd7d ro quiet
[ 11367.762] Build Date: 13 September 2013 01:28:59PM
[ 11367.762]
[ 11367.762] Current version of pixman: 0.30.2
[ 11367.762] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 11367.762] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 11367.762] (==) Log file: "/var/log/Xorg.8.log", Time: Thu Sep 19 23:04:24 2013
[ 11367.762] (++) Using config file: "/etc/bumblebee/xorg.conf.nvidia"
[ 11367.762] (++) Using config directory: "/etc/bumblebee/xorg.conf.d"
[ 11367.762] (==) ServerLayout "Layout0"
[ 11367.762] (==) No screen section available. Using defaults.
[ 11367.762] (**) |-->Screen "Default Screen Section" (0)
[ 11367.762] (**) | |-->Monitor "<default monitor>"
[ 11367.762] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 11367.762] (**) | |-->Device "DiscreteNvidia"
[ 11367.762] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 11367.762] (**) Option "AutoAddDevices" "false"
[ 11367.762] (**) Option "AutoAddGPU" "false"
[ 11367.762] (**) Not automatically adding devices
[ 11367.762] (==) Automatically enabling devices
[ 11367.762] (**) Not automatically adding GPU devices
[ 11367.762] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 11367.762] Entry deleted from font path.
[ 11367.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 11367.762] Entry deleted from font path.
[ 11367.762] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 11367.762] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 11367.762] Entry deleted from font path.
[ 11367.762] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 11367.762] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 11367.762] (++) ModulePath set to "/usr/lib/nvidia/xorg/,/usr/lib/xorg/modules"
[ 11367.762] (==) |-->Input Device "<default pointer>"
[ 11367.763] (==) |-->Input Device "<default keyboard>"
[ 11367.763] (==) The core pointer device wasn't specified explicitly in the layout.
Using the default mouse configuration.
[ 11367.763] (==) The core keyboard device wasn't specified explicitly in the layout.
Using the default keyboard configuration.
[ 11367.763] (II) Loader magic: 0x7fdc20
[ 11367.763] (II) Module ABI versions:
[ 11367.763] X.Org ANSI C Emulation: 0.4
[ 11367.763] X.Org Video Driver: 14.1
[ 11367.763] X.Org XInput driver : 19.1
[ 11367.763] X.Org Server Extension : 7.0
[ 11367.763] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 11367.763] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11367.763] setversion 1.4 failed
[ 11367.764] (--) PCI:*(0:1:0:0) 10de:11a0:1558:5105 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 11367.764] Initializing built-in extension Generic Event Extension
[ 11367.764] Initializing built-in extension SHAPE
[ 11367.764] Initializing built-in extension MIT-SHM
[ 11367.764] Initializing built-in extension XInputExtension
[ 11367.764] Initializing built-in extension XTEST
[ 11367.764] Initializing built-in extension BIG-REQUESTS
[ 11367.764] Initializing built-in extension SYNC
[ 11367.764] Initializing built-in extension XKEYBOARD
[ 11367.764] Initializing built-in extension XC-MISC
[ 11367.764] Initializing built-in extension SECURITY
[ 11367.764] Initializing built-in extension XINERAMA
[ 11367.764] Initializing built-in extension XFIXES
[ 11367.764] Initializing built-in extension RENDER
[ 11367.764] Initializing built-in extension RANDR
[ 11367.764] Initializing built-in extension COMPOSITE
[ 11367.764] Initializing built-in extension DAMAGE
[ 11367.764] Initializing built-in extension MIT-SCREEN-SAVER
[ 11367.764] Initializing built-in extension DOUBLE-BUFFER
[ 11367.764] Initializing built-in extension RECORD
[ 11367.764] Initializing built-in extension DPMS
[ 11367.764] Initializing built-in extension X-Resource
[ 11367.764] Initializing built-in extension XVideo
[ 11367.764] Initializing built-in extension XVideo-MotionCompensation
[ 11367.764] Initializing built-in extension XFree86-VidModeExtension
[ 11367.764] Initializing built-in extension XFree86-DGA
[ 11367.764] Initializing built-in extension XFree86-DRI
[ 11367.764] Initializing built-in extension DRI2
[ 11367.764] (II) LoadModule: "glx"
[ 11367.764] (II) Loading /usr/lib/nvidia/xorg/modules/extensions/libglx.so
[ 11367.773] (II) Module glx: vendor="NVIDIA Corporation"
[ 11367.773] compiled for 4.0.2, module version = 1.0.0
[ 11367.773] Module class: X.Org Server Extension
[ 11367.773] (II) NVIDIA GLX Module 325.15 Wed Jul 31 18:12:00 PDT 2013
[ 11367.773] Loading extension GLX
[ 11367.773] (II) LoadModule: "nvidia"
[ 11367.773] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 11367.773] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 11367.773] compiled for 4.0.2, module version = 1.0.0
[ 11367.773] Module class: X.Org Video Driver
[ 11367.773] (II) LoadModule: "mouse"
[ 11367.773] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
[ 11367.773] (II) Module mouse: vendor="X.Org Foundation"
[ 11367.773] compiled for 1.14.0, module version = 1.9.0
[ 11367.773] Module class: X.Org XInput Driver
[ 11367.773] ABI class: X.Org XInput driver, version 19.1
[ 11367.773] (II) LoadModule: "kbd"
[ 11367.774] (WW) Warning, couldn't open module kbd
[ 11367.774] (II) UnloadModule: "kbd"
[ 11367.774] (II) Unloading kbd
[ 11367.774] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 11367.774] (II) NVIDIA dlloader X Driver 325.15 Wed Jul 31 17:50:57 PDT 2013
[ 11367.774] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 11367.774] (--) using VT number 7
[ 11367.774] (II) Loading sub module "fb"
[ 11367.774] (II) LoadModule: "fb"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 11367.774] (II) Module fb: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.0.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 11367.774] (II) Loading sub module "wfb"
[ 11367.774] (II) LoadModule: "wfb"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 11367.774] (II) Module wfb: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.0.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (II) Loading sub module "shadow"
[ 11367.774] (II) LoadModule: "shadow"
[ 11367.774] (II) Loading /usr/lib/xorg/modules/libshadow.so
[ 11367.774] (II) Module shadow: vendor="X.Org Foundation"
[ 11367.774] compiled for 1.14.3, module version = 1.1.0
[ 11367.774] ABI class: X.Org ANSI C Emulation, version 0.4
[ 11367.774] (II) Loading sub module "ramdac"
[ 11367.774] (II) LoadModule: "ramdac"
[ 11367.774] (II) Module "ramdac" already built-in
[ 11367.774] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 11367.774] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 11367.775] (==) NVIDIA(0): RGB weight 888
[ 11367.775] (==) NVIDIA(0): Default visual is TrueColor
[ 11367.775] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 11367.775] (**) NVIDIA(0): Option "NoLogo" "true"
[ 11367.775] (**) NVIDIA(0): Option "ProbeAllGpus" "false"
[ 11367.775] (**) NVIDIA(0): Option "UseEDID" "false"
[ 11367.775] (**) NVIDIA(0): Option "UseDisplayDevice" "none"
[ 11367.775] (**) NVIDIA(0): Enabling 2D acceleration
[ 11367.775] (**) NVIDIA(0): Ignoring EDIDs
[ 11367.775] (**) NVIDIA(0): Option "UseDisplayDevice" set to "none"; enabling NoScanout
[ 11367.775] (**) NVIDIA(0): mode
[ 11368.299] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 11368.300] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 680M (GK104) at PCI:1:0:0 (GPU-0)
[ 11368.300] (--) NVIDIA(0): Memory: 4194304 kBytes
[ 11368.300] (--) NVIDIA(0): VideoBIOS: 80.04.29.00.01
[ 11368.300] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 11368.300] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 680M at PCI:1:0:0
[ 11368.300] (--) NVIDIA(0): none
[ 11368.300] (II) NVIDIA(0): Validated MetaModes:
[ 11368.300] (II) NVIDIA(0): "nvidia-auto-select"
[ 11368.300] (II) NVIDIA(0): Virtual screen size determined to be 640 x 480
[ 11368.300] (WW) NVIDIA(0): Unable to get display device for DPI computation.
[ 11368.300] (==) NVIDIA(0): DPI set to (75, 75); computed from built-in default
[ 11368.300] (--) Depth 24 pixmap format is 32 bpp
[ 11368.300] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 11368.300] (II) NVIDIA: access.
[ 11368.304] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 11368.304] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 11368.304] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 11368.304] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 11368.304] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 11368.304] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 11368.304] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 11368.304] (II) NVIDIA(0): Config Options in the README.
[ 11368.304] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 11368.308] Loading extension NV-GLX
[ 11368.312] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 11368.312] (==) NVIDIA(0): Backing store disabled
[ 11368.312] (==) NVIDIA(0): Silken mouse enabled
[ 11368.312] (==) NVIDIA(0): DPMS enabled
[ 11368.312] Loading extension NV-CONTROL
[ 11368.312] (II) Loading sub module "dri2"
[ 11368.312] (II) LoadModule: "dri2"
[ 11368.312] (II) Module "dri2" already built-in
[ 11368.312] (II) NVIDIA(0): [DRI2] Setup complete
[ 11368.312] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 11368.312] (--) RandR disabled
[ 11368.316] (II) Initializing extension GLX
[ 11368.342] (II) Using input driver 'mouse' for '<default pointer>'
[ 11368.342] (**) Option "CorePointer" "on"
[ 11368.342] (**) <default pointer>: always reports core events
[ 11368.342] (WW) <default pointer>: No Device specified, looking for one...
[ 11368.422] (II) <default pointer>: Setting Device option to "/dev/input/mice"
[ 11368.422] (--) <default pointer>: Device: "/dev/input/mice"
[ 11368.422] (==) <default pointer>: Protocol: "Auto"
[ 11368.422] (**) <default pointer>: always reports core events
[ 11368.422] (**) Option "Device" "/dev/input/mice"
[ 11368.475] (==) <default pointer>: Emulate3Buttons, Emulate3Timeout: 50
[ 11368.475] (**) <default pointer>: ZAxisMapping: buttons 4 and 5
[ 11368.475] (**) <default pointer>: Buttons: 9
[ 11368.475] (II) XINPUT: Adding extended input device "<default pointer>" (type: MOUSE, id 6)
[ 11368.475] (**) <default pointer>: (accel) keeping acceleration scheme 1
[ 11368.475] (**) <default pointer>: (accel) acceleration profile 0
[ 11368.475] (**) <default pointer>: (accel) acceleration factor: 2.000
[ 11368.475] (**) <default pointer>: (accel) acceleration threshold: 4
[ 11368.475] (II) <default pointer>: Setting mouse protocol to "ExplorerPS/2"
[ 11368.769] (II) <default pointer>: ps2EnableDataReporting: succeeded
[ 11368.769] (II) LoadModule: "kbd"
[ 11368.769] (WW) Warning, couldn't open module kbd
[ 11368.769] (II) UnloadModule: "kbd"
[ 11368.769] (II) Unloading kbd
[ 11368.769] (EE) Failed to load module "kbd" (module does not exist, 0)
[ 11368.769] (EE) No input driver matching `kbd'
[ 11368.771] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Video Bus (/dev/input/event11)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Video Bus (/dev/input/event9)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.771] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 11368.771] (II) AutoAddDevices is off - not adding device.
[ 11368.772] (II) config/udev: Adding input device Sleep Button (/dev/input/event4)
[ 11368.772] (II) AutoAddDevices is off - not adding device.
[ 11368.772] (II) config/udev: Adding drm device (/dev/dri/card1)
[ 11368.772] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 11368.772] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 11368.772] setversion 1.4 failed
[ 11368.772] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event1)
[ 11368.772] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/event2)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HP HP Link-5 micro dongle (/dev/input/mouse0)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event12)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event13)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event14)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.773] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event15)
[ 11368.773] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event16)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event17)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event18)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event8)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.774] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event10)
[ 11368.774] (II) AutoAddDevices is off - not adding device.
[ 11368.775] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 11368.775] (II) AutoAddDevices is off - not adding device.
[ 11368.775] (II) config/udev: Adding input device PC Speaker (/dev/input/event7)
[ 11368.775] (II) AutoAddDevices is off - not adding device.
[ 11374.183] (II) UnloadModule: "mouse"
[ 11374.199] (II) NVIDIA(GPU-0): Deleting GPU-0
[ 11374.200] (EE) Server terminated successfully (0). Closing log file.
I'm not willing to give up and install/build the drivers from the cuda SDK just yet so any help would be greatly appreciated.
Last edited by tim (2013-10-02 08:20:49)So in simple terms, the fix invovled ensuring the nvidia module is loaded before the bbswitch module. I'm not sure about the necessity of the things that follow but the fix may possibly also require removing bumblebee and possibly requires removing nvidia from repos and building the driver downloaded from nvidia.
This fix could be completely unrelated to the problems I was having with arch but I cannot verify the fix on arch specifically cos I installed every distro under the sun trying to get it all working and I got it to work on a non arch distro.
So... I'm not sure if I should really mark this a solved because I haven't/can't verify it on arch and technically the solution involved changing to another distro but in fact, I know it has absolutely nothing to do with arch since I saw the same behaviour on 3 other distros. If I have time, I will reinstall arch and verify but for the moment, I have a lot of work to catch up on now that I have a working nvidia driver I can actually use for dev
Anyway, what I think is going on is there is some bizarre issue with bbswitch that stops the nvidia driver from being found because on the current distro I have installed, if I have no bbswitch, no bumblebee and no nvidia modules loaded or services running etc. I can modprobe the nvidia driver and all works fine. I can then modprobe the bbswitch driver and that works too. IF I modprobe the bbswitch driver first and then modprobe the nvidia driver, I get this error that says the nvidia module cant be found. The location it prints is in some updates directory whcih is odd too because I installed from nvidia source and never installed updates at all and made sure that there were absolutely no repo nvidia drivers or updates etc.
Last edited by tim (2013-10-02 08:35:39) -
[solved] kernel 3.2.8 fails with loading nvidia and virtualbox modules
Topic says it. I just updated from kernel 3.2.7 to 3.2.8 and X won't start. The kernel fails to load the nvidia module with the follwing error: 'Exec format error'. Same for the virtualbox kernel modules. This is on x86_64, multilib and all testing repos enabled.
Downgrade to 3.2.7 by
pacman -S core/linux
solves the issue.
Last edited by Harey (2012-02-28 18:55:36)Allan wrote:Bug tracker...
https://bugs.archlinux.org/task/28695 -
[Solved] Nvidia module fails to load on lastest kernel (3.6.7-1-ARCH)
Hi there!
I have just updated my desktop PC yesterday, as I normally do every week (yaourt -Syu --aur), and today when I rebooted my Xorg refuses to load.
I've checked the logs, etc, and I think there's a problem with the nvidia module. In fact, I can't even modprobe it.
I've googled for hours, but I can't find any solution out there...
Here you have the log: https://dl.dropbox.com/u/1732176/Xorg.0.log
Any hint will be appreciated...
Thanks in advance ^^
Last edited by roobre (2012-11-24 16:18:40)falconindy wrote:
[ 24.672] (EE) NVIDIA: Failed to load the NVIDIA kernel module. Please check your
[ 24.672] (EE) NVIDIA: system's kernel log for additional error messages.
Perhaps you should look at dmesg.
Thanks!
Looking there I found:
[ 5.371106] NVRM: The NVIDIA GeForce 7100 / nForce 630i GPU installed in this system is
NVRM: supported through the NVIDIA 304.xx Legacy drivers. Please
NVRM: visit http://www.nvidia.com/object/unix.html for more
NVRM: information. The 310.19 NVIDIA driver will ignore
NVRM: this GPU. Continuing probe...
I'll try to pacman those drivers and check again...
[EDIT]
Yeehaa!
It works! ^^
Thank you so much
Last edited by roobre (2012-11-24 16:18:27) -
[SOLVED] Screen turns off on boot at "Loading ACPI Modules"
So, I have been using arch for some time and am really liking it so far. It has replaced Windows on my desktop and am planning to install it on my laptop when I get a chance. I showed my parents some audio apps that run under Linux, and they suddenly wanted arch too! I decided to install arch on their desktop, so after migrating Windows to a larger hard drive, I installed arch onto the remaining space... Everything seemed fine until I tried to boot into the new system. Once it reaches "Loading ACPI Modules" the screen turns off and refuses to turn back on. I have tried everything I could think of (booting into the LiveCD again and running pacman -Syu on the new install, swapping the monitor to a different video port, reinstalling arch) and some solutions I found on the forums (adding acpi=off, noapic, nolapic_sound to the boot line.) The latter made the boot skip ACPI, but the the screen blanks on "Waiting for udev events to be processed"! I'm thinking it might be something to do with the video card (an old Radeon X1300 AGP) but I don't know what to do to fix it... The system doesn't lock up, as even after it blanks I can log in and push Ctrl-G to make a terminal beep! I've tried everything I can think of... If this doesn't work I'll probably try another distro on that machine. The system is:
Intel D845WN Motherboard
1GB PC133 RAM
2.2Ghz Celeron Processor
Radeon X1300 AGP card
Sound Blaster Audigy PCI card
USB 2.0 PCI Card
PCI NIC
Thanks in advance for any advice!
EDIT: Actually, I think it does lock up, as I don't have to hold down the power button to turn it off after the screen blanks.
EDIT AGAIN: Thanks, adding "radeon.setmode=0" worked like a charm! I knew that card was a bit wacky, but I didn't think it would stop the system from booting...
Last edited by Fwirt (2009-10-12 23:24:27)ok, seems it's the automatic kernel mode setting (KMS) that causes this see:
http://wiki.archlinux.org/index.php/ATI … _.28KMS.29
to get the system to boot, go into the grub menu, edit the boot option (i.e. press 'e') then edit the line that looks like
kernel /vmlinuz26 root=...
and add
radeon.modeset=0
at the end of it. Then your system should start fine. Now add this to the corresponding line in /boot/grub/menu.lst
greetings
Indriði -
[SOLVED] XOrg fails to load Nvidia driver on startup
Hi,
I'm having a fairly strange issue where XOrg is failing to load my driver when I start up my laptop. I'm using kdm, but this is causing it to fail. However, doing a simple
$sudo systemctl restart kdm
works, and everything starts up fine. When kdm is in the failed state, I see this:
$sudo systemctl status kdm
● kdm.service - K Display Manager
Loaded: loaded (/usr/lib/systemd/system/kdm.service; enabled; vendor preset: disabled)
Active: active (running) since Fri 2014-12-19 18:47:26 EST; 41s ago
Main PID: 247 (kdm)
CGroup: /system.slice/kdm.service
└─247 /usr/bin/kdm -nodaemon
Dec 19 18:47:26 laptop systemd[1]: Started K Display Manager.
Dec 19 18:47:27 laptop kdm[247]: X server died during startup
Dec 19 18:47:27 laptop kdm[247]: X server for display :0 cannot be started, session disabled
And in my XOrg log, I see:
[ 3.639]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 3.639]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 3.639] X Protocol Version 11, Revision 0
[ 3.639] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 3.639] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 3.639] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 3.639] Build Date: 10 December 2014 02:34:24PM
[ 3.639]
[ 3.639] Current version of pixman: 0.32.6
[ 3.639] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 3.639] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 3.639] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:47:26 2014
[ 3.645] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 3.649] (==) No Layout section. Using the first Screen section.
[ 3.649] (==) No screen section available. Using defaults.
[ 3.649] (**) |-->Screen "Default Screen Section" (0)
[ 3.649] (**) | |-->Monitor "<default monitor>"
[ 3.650] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 3.650] (==) Automatically adding devices
[ 3.650] (==) Automatically enabling devices
[ 3.650] (==) Automatically adding GPU devices
[ 3.658] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 3.658] Entry deleted from font path.
[ 3.659] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 3.659] Entry deleted from font path.
[ 3.659] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 3.660] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 3.660] Entry deleted from font path.
[ 3.660] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 3.660] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 3.660] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 3.660] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 3.660] (II) Loader magic: 0x818d80
[ 3.660] (II) Module ABI versions:
[ 3.660] X.Org ANSI C Emulation: 0.4
[ 3.660] X.Org Video Driver: 18.0
[ 3.660] X.Org XInput driver : 21.0
[ 3.660] X.Org Server Extension : 8.0
[ 3.662] (EE) systemd-logind: failed to get session: PID 267 does not belong to any known session
[ 3.663] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 3.663] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 3.664] (II) LoadModule: "glx"
[ 3.675] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 3.767] (II) Module glx: vendor="NVIDIA Corporation"
[ 3.767] compiled for 4.0.2, module version = 1.0.0
[ 3.767] Module class: X.Org Server Extension
[ 3.768] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 3.769] (==) Matched nouveau as autoconfigured driver 0
[ 3.769] (==) Matched nv as autoconfigured driver 1
[ 3.769] (==) Matched modesetting as autoconfigured driver 2
[ 3.769] (==) Matched fbdev as autoconfigured driver 3
[ 3.769] (==) Matched vesa as autoconfigured driver 4
[ 3.769] (==) Assigned the driver to the xf86ConfigLayout
[ 3.769] (II) LoadModule: "nouveau"
[ 3.769] (WW) Warning, couldn't open module nouveau
[ 3.769] (II) UnloadModule: "nouveau"
[ 3.769] (II) Unloading nouveau
[ 3.769] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 3.769] (II) LoadModule: "nv"
[ 3.769] (WW) Warning, couldn't open module nv
[ 3.769] (II) UnloadModule: "nv"
[ 3.769] (II) Unloading nv
[ 3.769] (EE) Failed to load module "nv" (module does not exist, 0)
[ 3.769] (II) LoadModule: "modesetting"
[ 3.769] (WW) Warning, couldn't open module modesetting
[ 3.769] (II) UnloadModule: "modesetting"
[ 3.769] (II) Unloading modesetting
[ 3.769] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 3.769] (II) LoadModule: "fbdev"
[ 3.769] (WW) Warning, couldn't open module fbdev
[ 3.769] (II) UnloadModule: "fbdev"
[ 3.769] (II) Unloading fbdev
[ 3.769] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 3.769] (II) LoadModule: "vesa"
[ 3.770] (WW) Warning, couldn't open module vesa
[ 3.770] (II) UnloadModule: "vesa"
[ 3.770] (II) Unloading vesa
[ 3.770] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 3.770] (EE) No drivers available.
[ 3.770] (EE)
Fatal server error:
[ 3.770] (EE) no screens found(EE)
[ 3.770] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 3.770] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 3.770] (EE)
Which looks like it loads my nvidia driver, but then just decides not to use it for some reason... After I restart kdm, it seems to use the driver fine:
[ 78.897]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 78.897]
X.Org X Server 1.16.2.901 (1.16.3 RC 1)
Release Date: 2014-12-09
[ 78.897] X Protocol Version 11, Revision 0
[ 78.897] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 78.897] Current Operating System: Linux laptop 3.17.6-1-ARCH #1 SMP PREEMPT Sun Dec 7 23:43:32 UTC 2014 x86_64
[ 78.897] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 78.897] Build Date: 10 December 2014 02:34:24PM
[ 78.897]
[ 78.897] Current version of pixman: 0.32.6
[ 78.897] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 78.897] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 78.897] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Dec 19 18:48:38 2014
[ 78.897] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 78.897] (==) No Layout section. Using the first Screen section.
[ 78.897] (==) No screen section available. Using defaults.
[ 78.897] (**) |-->Screen "Default Screen Section" (0)
[ 78.897] (**) | |-->Monitor "<default monitor>"
[ 78.898] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 78.898] (==) Automatically adding devices
[ 78.898] (==) Automatically enabling devices
[ 78.898] (==) Automatically adding GPU devices
[ 78.898] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 78.898] Entry deleted from font path.
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 78.898] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 78.898] Entry deleted from font path.
[ 78.898] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 78.898] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 78.898] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 78.898] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 78.898] (II) Loader magic: 0x818d80
[ 78.898] (II) Module ABI versions:
[ 78.898] X.Org ANSI C Emulation: 0.4
[ 78.898] X.Org Video Driver: 18.0
[ 78.898] X.Org XInput driver : 21.0
[ 78.898] X.Org Server Extension : 8.0
[ 78.900] (EE) systemd-logind: failed to get session: PID 542 does not belong to any known session
[ 78.900] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 78.901] (--) PCI:*(0:1:0:0) 10de:11a1:1558:0371 rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 78.901] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 78.901] (II) LoadModule: "glx"
[ 78.902] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 78.913] (II) Module glx: vendor="NVIDIA Corporation"
[ 78.913] compiled for 4.0.2, module version = 1.0.0
[ 78.913] Module class: X.Org Server Extension
[ 78.913] (II) NVIDIA GLX Module 343.36 Mon Dec 1 15:50:02 PST 2014
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
[ 78.914] (==) Matched nvidia as autoconfigured driver 0
[ 78.914] (==) Matched nouveau as autoconfigured driver 1
[ 78.914] (==) Matched nv as autoconfigured driver 2
[ 78.914] (==) Matched nouveau as autoconfigured driver 3
[ 78.914] (==) Matched nv as autoconfigured driver 4
[ 78.914] (==) Matched modesetting as autoconfigured driver 5
[ 78.914] (==) Matched fbdev as autoconfigured driver 6
[ 78.914] (==) Matched vesa as autoconfigured driver 7
[ 78.914] (==) Assigned the driver to the xf86ConfigLayout
[ 78.914] (II) LoadModule: "nvidia"
[ 78.914] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 78.920] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 78.920] compiled for 4.0.2, module version = 1.0.0
[ 78.920] Module class: X.Org Video Driver
[ 78.920] (II) LoadModule: "nouveau"
[ 78.921] (WW) Warning, couldn't open module nouveau
[ 78.921] (II) UnloadModule: "nouveau"
[ 78.921] (II) Unloading nouveau
[ 78.921] (EE) Failed to load module "nouveau" (module does not exist, 0)
[ 78.921] (II) LoadModule: "nv"
[ 78.921] (WW) Warning, couldn't open module nv
[ 78.921] (II) UnloadModule: "nv"
[ 78.921] (II) Unloading nv
[ 78.921] (EE) Failed to load module "nv" (module does not exist, 0)
[ 78.921] (II) LoadModule: "modesetting"
[ 78.921] (WW) Warning, couldn't open module modesetting
[ 78.921] (II) UnloadModule: "modesetting"
[ 78.921] (II) Unloading modesetting
[ 78.921] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 78.921] (II) LoadModule: "fbdev"
[ 78.922] (WW) Warning, couldn't open module fbdev
[ 78.922] (II) UnloadModule: "fbdev"
[ 78.922] (II) Unloading fbdev
[ 78.922] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 78.922] (II) LoadModule: "vesa"
[ 78.922] (WW) Warning, couldn't open module vesa
[ 78.922] (II) UnloadModule: "vesa"
[ 78.922] (II) Unloading vesa
[ 78.922] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 78.922] (II) NVIDIA dlloader X Driver 343.36 Mon Dec 1 15:28:39 PST 2014
[ 78.922] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 78.922] (++) using VT number 7
[ 78.935] (II) Loading sub module "fb"
[ 78.935] (II) LoadModule: "fb"
[ 78.935] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 78.936] (II) Module fb: vendor="X.Org Foundation"
[ 78.936] compiled for 1.16.2.901, module version = 1.0.0
[ 78.936] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.936] (II) Loading sub module "wfb"
[ 78.936] (II) LoadModule: "wfb"
[ 78.936] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 78.937] (II) Module wfb: vendor="X.Org Foundation"
[ 78.937] compiled for 1.16.2.901, module version = 1.0.0
[ 78.937] ABI class: X.Org ANSI C Emulation, version 0.4
[ 78.937] (II) Loading sub module "ramdac"
[ 78.937] (II) LoadModule: "ramdac"
[ 78.937] (II) Module "ramdac" already built-in
[ 78.939] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 78.939] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 78.939] (==) NVIDIA(0): RGB weight 888
[ 78.939] (==) NVIDIA(0): Default visual is TrueColor
[ 78.939] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 78.940] (**) NVIDIA(0): Enabling 2D acceleration
[ 79.610] (II) NVIDIA(0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 79.610] (II) NVIDIA(0): 3D Vision stereo.
[ 79.610] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20130102)
[ 79.612] (II) NVIDIA(0): NVIDIA GPU GeForce GTX 670MX (GK104) at PCI:1:0:0 (GPU-0)
[ 79.612] (--) NVIDIA(0): Memory: 3145728 kBytes
[ 79.612] (--) NVIDIA(0): VideoBIOS: 80.04.67.00.06
[ 79.612] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 79.616] (--) NVIDIA(0): Valid display device(s) on GeForce GTX 670MX at PCI:1:0:0
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0) (boot, connected)
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1) (connected)
[ 79.616] (--) NVIDIA(0): DFP-2
[ 79.616] (--) NVIDIA(0): DFP-3
[ 79.616] (--) NVIDIA(0): DFP-4
[ 79.616] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal LVDS
[ 79.616] (--) NVIDIA(GPU-0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): Samsung SyncMaster (DFP-1): Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): Samsung SyncMaster (DFP-1): 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-2: Internal TMDS
[ 79.616] (--) NVIDIA(GPU-0): DFP-2: 165.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-3: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-3: 960.0 MHz maximum pixel clock
[ 79.616] (--) NVIDIA(0): DFP-4: Internal DisplayPort
[ 79.616] (--) NVIDIA(GPU-0): DFP-4: 960.0 MHz maximum pixel clock
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 79.616] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 79.616] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 79.616] (**) NVIDIA(0): device Samsung SyncMaster (DFP-1) (Using EDID frequencies
[ 79.616] (**) NVIDIA(0): has been enabled on all display devices.)
[ 79.618] (==) NVIDIA(0):
[ 79.618] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 79.618] (==) NVIDIA(0): will be used as the requested mode.
[ 79.618] (==) NVIDIA(0):
[ 79.619] (II) NVIDIA(0): Validated MetaModes:
[ 79.619] (II) NVIDIA(0): "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 79.619] (II) NVIDIA(0): Virtual screen size determined to be 3600 x 1080
[ 80.144] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
[ 80.144] (--) NVIDIA(0): option
[ 80.144] (--) Depth 24 pixmap format is 32 bpp
[ 80.144] (II) NVIDIA: Using 3072.00 MB of virtual memory for indirect memory
[ 80.144] (II) NVIDIA: access.
[ 80.150] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 80.150] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 80.150] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 80.150] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 80.150] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 80.150] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 80.150] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 80.150] (II) NVIDIA(0): Config Options in the README.
[ 80.155] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select,DFP-1:nvidia-auto-select"
[ 80.532] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 80.532] (==) NVIDIA(0): Backing store enabled
[ 80.532] (==) NVIDIA(0): Silken mouse enabled
[ 80.533] (==) NVIDIA(0): DPMS enabled
[ 80.533] (II) Loading sub module "dri2"
[ 80.533] (II) LoadModule: "dri2"
[ 80.533] (II) Module "dri2" already built-in
[ 80.533] (II) NVIDIA(0): [DRI2] Setup complete
[ 80.533] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 80.533] (--) RandR disabled
[ 80.539] (II) Initializing extension GLX
[ 80.605] (II) config/udev: Adding input device Power Button (/dev/input/event14)
[ 80.605] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.605] (II) LoadModule: "evdev"
[ 80.606] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 80.607] (II) Module evdev: vendor="X.Org Foundation"
[ 80.607] compiled for 1.16.2, module version = 2.9.1
[ 80.607] Module class: X.Org XInput Driver
[ 80.607] ABI class: X.Org XInput driver, version 21.0
[ 80.607] (II) Using input driver 'evdev' for 'Power Button'
[ 80.607] (**) Power Button: always reports core events
[ 80.607] (**) evdev: Power Button: Device: "/dev/input/event14"
[ 80.608] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.608] (--) evdev: Power Button: Found keys
[ 80.608] (II) evdev: Power Button: Configuring as keyboard
[ 80.608] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input18/event14"
[ 80.608] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 80.608] (**) Option "xkb_rules" "evdev"
[ 80.608] (**) Option "xkb_model" "pc104"
[ 80.608] (**) Option "xkb_layout" "us"
[ 80.635] (II) config/udev: Adding input device Video Bus (/dev/input/event15)
[ 80.635] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 80.635] (II) Using input driver 'evdev' for 'Video Bus'
[ 80.635] (**) Video Bus: always reports core events
[ 80.635] (**) evdev: Video Bus: Device: "/dev/input/event15"
[ 80.635] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 80.635] (--) evdev: Video Bus: Found keys
[ 80.635] (II) evdev: Video Bus: Configuring as keyboard
[ 80.635] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:13/LNXVIDEO:00/input/input19/event15"
[ 80.635] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 80.635] (**) Option "xkb_rules" "evdev"
[ 80.635] (**) Option "xkb_model" "pc104"
[ 80.635] (**) Option "xkb_layout" "us"
[ 80.636] (II) config/udev: Adding input device Power Button (/dev/input/event13)
[ 80.636] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 80.636] (II) Using input driver 'evdev' for 'Power Button'
[ 80.636] (**) Power Button: always reports core events
[ 80.636] (**) evdev: Power Button: Device: "/dev/input/event13"
[ 80.636] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 80.636] (--) evdev: Power Button: Found keys
[ 80.636] (II) evdev: Power Button: Configuring as keyboard
[ 80.636] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input17/event13"
[ 80.636] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 80.636] (**) Option "xkb_rules" "evdev"
[ 80.636] (**) Option "xkb_model" "pc104"
[ 80.636] (**) Option "xkb_layout" "us"
[ 80.637] (II) config/udev: Adding input device Lid Switch (/dev/input/event11)
[ 80.637] (II) No input driver specified, ignoring this device.
[ 80.637] (II) This device may have been added with another device file.
[ 80.637] (II) config/udev: Adding input device Sleep Button (/dev/input/event12)
[ 80.637] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 80.637] (II) Using input driver 'evdev' for 'Sleep Button'
[ 80.637] (**) Sleep Button: always reports core events
[ 80.637] (**) evdev: Sleep Button: Device: "/dev/input/event12"
[ 80.637] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 80.637] (--) evdev: Sleep Button: Found keys
[ 80.637] (II) evdev: Sleep Button: Configuring as keyboard
[ 80.637] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input16/event12"
[ 80.637] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 80.637] (**) Option "xkb_rules" "evdev"
[ 80.637] (**) Option "xkb_model" "pc104"
[ 80.637] (**) Option "xkb_layout" "us"
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.638] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event19)
[ 80.638] (II) No input driver specified, ignoring this device.
[ 80.638] (II) This device may have been added with another device file.
[ 80.639] (II) config/udev: Adding input device LOGITECH G110 G-keys (/dev/input/event3)
[ 80.639] (**) LOGITECH G110 G-keys: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'LOGITECH G110 G-keys'
[ 80.639] (**) LOGITECH G110 G-keys: always reports core events
[ 80.639] (**) evdev: LOGITECH G110 G-keys: Device: "/dev/input/event3"
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Vendor 0x46d Product 0xc22b
[ 80.639] (--) evdev: LOGITECH G110 G-keys: Found keys
[ 80.639] (II) evdev: LOGITECH G110 G-keys: Configuring as keyboard
[ 80.639] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.1/3-4.1.1:1.0/0003:046D:C22B.0003/input/input7/event3"
[ 80.639] (II) XINPUT: Adding extended input device "LOGITECH G110 G-keys" (type: KEYBOARD, id 10)
[ 80.639] (**) Option "xkb_rules" "evdev"
[ 80.639] (**) Option "xkb_model" "pc104"
[ 80.639] (**) Option "xkb_layout" "us"
[ 80.639] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event4)
[ 80.639] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.639] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.639] (**) Gaming Keyboard G110: always reports core events
[ 80.639] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event4"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.0/0003:046D:C22A.0004/input/input8/event4"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 11)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.640] (**) Option "xkb_layout" "us"
[ 80.640] (II) config/udev: Adding input device Gaming Keyboard G110 (/dev/input/event5)
[ 80.640] (**) Gaming Keyboard G110: Applying InputClass "evdev keyboard catchall"
[ 80.640] (II) Using input driver 'evdev' for 'Gaming Keyboard G110'
[ 80.640] (**) Gaming Keyboard G110: always reports core events
[ 80.640] (**) evdev: Gaming Keyboard G110: Device: "/dev/input/event5"
[ 80.640] (--) evdev: Gaming Keyboard G110: Vendor 0x46d Product 0xc22a
[ 80.640] (--) evdev: Gaming Keyboard G110: Found keys
[ 80.640] (II) evdev: Gaming Keyboard G110: Configuring as keyboard
[ 80.640] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.1/3-4.1.3/3-4.1.3:1.1/0003:046D:C22A.0005/input/input9/event5"
[ 80.640] (II) XINPUT: Adding extended input device "Gaming Keyboard G110" (type: KEYBOARD, id 12)
[ 80.640] (**) Option "xkb_rules" "evdev"
[ 80.640] (**) Option "xkb_model" "pc104"
[ 80.641] (**) Option "xkb_layout" "us"
[ 80.641] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event1)
[ 80.641] (**) Razer Razer Lachesis: Applying InputClass "evdev pointer catchall"
[ 80.641] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.641] (**) Razer Razer Lachesis: always reports core events
[ 80.641] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event1"
[ 80.641] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.641] (--) evdev: Razer Razer Lachesis: Found 12 mouse buttons
[ 80.641] (--) evdev: Razer Razer Lachesis: Found scroll wheel(s)
[ 80.641] (--) evdev: Razer Razer Lachesis: Found relative axes
[ 80.641] (--) evdev: Razer Razer Lachesis: Found x and y relative axes
[ 80.641] (II) evdev: Razer Razer Lachesis: Configuring as mouse
[ 80.641] (II) evdev: Razer Razer Lachesis: Adding scrollwheel support
[ 80.641] (**) evdev: Razer Razer Lachesis: YAxisMapping: buttons 4 and 5
[ 80.641] (**) evdev: Razer Razer Lachesis: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 80.641] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.0/0003:1532:000C.0001/input/input5/event1"
[ 80.641] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: MOUSE, id 13)
[ 80.642] (II) evdev: Razer Razer Lachesis: initialized for relative axes.
[ 80.642] (**) Razer Razer Lachesis: (accel) keeping acceleration scheme 1
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration profile 0
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration factor: 2.000
[ 80.642] (**) Razer Razer Lachesis: (accel) acceleration threshold: 4
[ 80.642] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/mouse0)
[ 80.642] (II) No input driver specified, ignoring this device.
[ 80.642] (II) This device may have been added with another device file.
[ 80.643] (II) config/udev: Adding input device Razer Razer Lachesis (/dev/input/event2)
[ 80.643] (**) Razer Razer Lachesis: Applying InputClass "evdev keyboard catchall"
[ 80.643] (II) Using input driver 'evdev' for 'Razer Razer Lachesis'
[ 80.643] (**) Razer Razer Lachesis: always reports core events
[ 80.643] (**) evdev: Razer Razer Lachesis: Device: "/dev/input/event2"
[ 80.643] (--) evdev: Razer Razer Lachesis: Vendor 0x1532 Product 0xc
[ 80.643] (--) evdev: Razer Razer Lachesis: Found keys
[ 80.643] (II) evdev: Razer Razer Lachesis: Configuring as keyboard
[ 80.643] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4.2/3-4.2:1.1/0003:1532:000C.0002/input/input6/event2"
[ 80.643] (II) XINPUT: Adding extended input device "Razer Razer Lachesis" (type: KEYBOARD, id 14)
[ 80.643] (**) Option "xkb_rules" "evdev"
[ 80.643] (**) Option "xkb_model" "pc104"
[ 80.643] (**) Option "xkb_layout" "us"
[ 80.643] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event6)
[ 80.643] (II) No input driver specified, ignoring this device.
[ 80.643] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event7)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event8)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.644] (II) config/udev: Adding input device HDA Intel PCH Line Out (/dev/input/event9)
[ 80.644] (II) No input driver specified, ignoring this device.
[ 80.644] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event10)
[ 80.645] (II) No input driver specified, ignoring this device.
[ 80.645] (II) This device may have been added with another device file.
[ 80.645] (II) config/udev: Adding input device BisonCam, NB Pro (/dev/input/event17)
[ 80.645] (**) BisonCam, NB Pro: Applying InputClass "evdev keyboard catchall"
[ 80.645] (II) Using input driver 'evdev' for 'BisonCam, NB Pro'
[ 80.645] (**) BisonCam, NB Pro: always reports core events
[ 80.645] (**) evdev: BisonCam, NB Pro: Device: "/dev/input/event17"
[ 80.645] (--) evdev: BisonCam, NB Pro: Vendor 0x5986 Product 0x512
[ 80.645] (--) evdev: BisonCam, NB Pro: Found keys
[ 80.645] (II) evdev: BisonCam, NB Pro: Configuring as keyboard
[ 80.645] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input23/event17"
[ 80.645] (II) XINPUT: Adding extended input device "BisonCam, NB Pro" (type: KEYBOARD, id 15)
[ 80.645] (**) Option "xkb_rules" "evdev"
[ 80.645] (**) Option "xkb_model" "pc104"
[ 80.645] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 80.646] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 80.646] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 80.646] (**) AT Translated Set 2 keyboard: always reports core events
[ 80.646] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 80.646] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 80.646] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 80.646] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 80.646] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 16)
[ 80.646] (**) Option "xkb_rules" "evdev"
[ 80.646] (**) Option "xkb_model" "pc104"
[ 80.646] (**) Option "xkb_layout" "us"
[ 80.646] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event20)
[ 80.646] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 80.647] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "Default clickpad buttons"
[ 80.647] (II) LoadModule: "synaptics"
[ 80.647] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 80.647] (II) Module synaptics: vendor="X.Org Foundation"
[ 80.647] compiled for 1.16.0, module version = 1.8.1
[ 80.647] Module class: X.Org XInput Driver
[ 80.647] ABI class: X.Org XInput driver, version 21.0
[ 80.647] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 80.647] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.647] (**) Option "Device" "/dev/input/event20"
[ 80.756] (II) synaptics: SynPS/2 Synaptics TouchPad: found clickpad property
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5662 (res 42)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4660 (res 47)
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left double triple
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 80.757] (**) Option "TapButton1" "1"
[ 80.757] (**) Option "TapButton2" "2"
[ 80.757] (**) Option "TapButton3" "3"
[ 80.757] (**) Option "SoftButtonAreas" "50% 0 82% 0 0 0 0 0"
[ 80.757] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.757] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 80.810] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio2/input/input22/event20"
[ 80.810] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 17)
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MaxSpeed is now 1.75
[ 80.810] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) AccelFactor is now 0.038
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 80.810] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 80.810] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 80.811] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 80.811] (**) SynPS/2 Synaptics TouchPad: Ignoring device from InputClass "touchpad ignore duplicates"
[ 80.811] (II) config/udev: Adding input device PC Speaker (/dev/input/event16)
[ 80.811] (II) No input driver specified, ignoring this device.
[ 80.811] (II) This device may have been added with another device file.
[ 88.265] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.265] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.282] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 88.282] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 88.291] (II) NVIDIA(0): Setting mode "LVDS-0: nvidia-auto-select @1920x1080 +0+0 {ViewPortIn=1920x1080, ViewPortOut=1920x1080+0+0}, HDMI-0: 1680x1050_60_0 @1680x1050 +1920+0 {ViewPortIn=1680x1050, ViewPortOut=1680x1050+0+0}"
[ 89.221] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 89.221] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 90.639] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 90.639] (II) NVIDIA(GPU-0): 3D Vision stereo.
[ 93.745] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (DFP-1)) does not support NVIDIA
[ 93.745] (II) NVIDIA(GPU-0): 3D Vision stereo.
Notably, the following lines appear in the working case, but not the broken case:
[ 78.914] (II) Applying OutputClass "nvidia" to /dev/dri/card0
[ 78.914] loading driver: nvidia
Does anyone know what might be going on here?
Last edited by straemer (2014-12-20 13:03:58)Hmmmm, that doesn't seem to be the issue. I have a nvidia geforce gtx 670mx. The nvidia website does link me to the 340xx driver for that card, but downgrading to that version still has the same issue. I suspect the issue is in Xorg, since it seems to load the module, but then decides it doesn't have a driver to run for some reason.
-
[SOLVED] Can't load this module??
Ok, I discovered why I have no eth0 device. I have an
Nvidia MCP61 Ethernet card, according to lscpi -v
and no associated "Kernel" modules.
The necessary Ethernet driver for that Nvidia card is forcedeth
however
# modprobe forcedeth
FATAL: Module forcedeth not found.
but if I perform a systemwide find..
I get
/usr/lib/modules/3.6.2-1-ARCH/kernel/drivers/net/ethernet/nvidia/forcedeth.ko.gz
but according to 'man modprobe' the modprobe program looks in the /lib/modules/'uname -r' directory
and when I run
# uname -r
3.5.6-1-ARCH
I can cleary see why modprobe didn't work since according to the previous "find" there is no "forcedeth" in that directory.
so I tried
# modprobe -S 3.6.2-1-ARCH
Error: missing parameters. See -h.
to tell modprobe to search in that directory instead, but despite different variations I couldn't change the version sucessfully.
So instead I tried copying the "forcedeth.ko.gz" to the /lib/modules/3.5.6-1-ARCH directory
and I still haven't been able to "modprobe" it, even with full pathname and force option provided.
So, in summation, I had the driver in the wrong directory according to 'uname -r' and thus I couldn't
load it. I tried to manually give modprobe a different kernel version, without sucess, and have tried
copying forcedeth.ko.gz to the directory which corresponded to /lib/modules/'uname -r'.
I guess I need to either
- upgrade the kernel without an internet connection?
- sucessfully modprobe forcedeth despite the kernel version conflict?
- maybe throw a symbolic link somewhere?
- give an explicit option to define a full path in a config file?
- do something with mkinitcpio that can specify that module and boot into that ramdisk?
Any suggestions would be greatly appreciated, since I don't know how else to load the module.
If any other info on my system might give a lead, I'd be more than happy to provide it. Thanks. I'm almost there...
Last edited by confusion-is-my-sedative (2012-10-26 21:26:06)ok, did and done. (However, note that this isn't raw code since I have to type from display of the monitor to the laptop.)
# file /boot/vmlinuz-linux
/boot/vmlinuz-linux: Linux kernel x86 boot executable bzImage, version 3.6.2-1-ARCH (tobias@T=POWA-LX) #1 SMP PREMPT Fri Oct 12 23:58, RO-rootFS, swap_dev 0x3, Normal VGA
According to file, I do have the latest kernel, which makes this even more peculiar since it isn't consistent with 'uname -r'
3.5.6-1-ARCH
and I'm using grub legacy, I think.
# cat /boot/grub/menu.1st
timeout 5
default 0
color light-blue/black light-cyan/blue
# BOOT SECTION
# (0) Arch Linux
title Arch Linux
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/xxxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx ro modeset=0
initrd /boot/initramfs-fallback.img
# (1) Arch Linux
title Arch Linux Fallback
root (hd0,2)
kernel /boot/vmlinuz-linux root=/dev/disk/by-uuid/xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxx ro
initrd /boot/initramfs-fallback.img
I didn't post the whole config since transcribing comments with mode suggestions would be needless. But I don't think there's any danger in ommitting the '#' lines, is there?
Maybe you are looking for
-
Creating multiple columns in InDesign CC for Mac
I have InDesign CC 9.2 for Mac with the World Tools add-on. Right now I'm typesetting a document that requires one section to be printed in two columns, with the rest of the document appearing normally. On Word it was formatted correctly, but when I
-
I'm trying to run an X session and stretch my display across three monitors on two cards. Without an xorg.conf, X has no problems starting up and using the two monitors on the first card, however it doesn't seem to know anything about the second car
-
Getting "Unknown" error in Terminal?
To give you a quick summary of the situation I am in, I'm trying to set up a Minecraft server for my friend and I to play together, and this involves me using the Terminal. However, it doesn't appear to be working even though I'm doing everything I h
-
Why are songs missing from albums I downloaded
When I try to listen to some albums songs are missing! Do I have to download the entire cd again?
-
Cannot sync - BB8900 with BB Desktop Manager for Mac
After first downloading Desktop Manager, I was able to sync with my 8900 once. Now, every time I connect the device (via USB), Desktop Manager opens, attempts to connect to the device, and fails. Status of the device shows at 'not connected'. I've