[SOLVED] Lost my text console

After the last full upgrade yesterday, something odd has happened to my console. I don't use any kind of gdm; I boot (with nomdeset) to a text-only console and then run startx if/when I'm ready for GUI stuff. When I want a larger, full-screen font or just avoid the clutter of a desktop, I'll ctrl-alt-F{x} to a non-GUI console. When I'm ready to reboot, I quit out of fluxbox and do so.
All of a sudden, once I start xorg the text consoles are gone. ctrl-alt-F1 takes me to a blank screen; if I exit out of xorg entirely there are no visible consoles anywhere and I have to blindly ctrl-alt-del to reboot. It's not a crippling problem -- I can do whatever I want through xterm -- but it's annoying.
graphics card is an onboard Radeon 6530; using the arch implementation of the catalyst driver (catalyst-hook). Has anyone else seen this happen?
Last edited by WyoPBS (2013-04-28 15:59:56)

Ah, found the answer over in the Catalyst thread of the bar&grill forum:
I got workaround from one of the bug reports in the unofficial site : just pass vga=... (say vga=792 ) to kernel from grub
This fixed it for me

Similar Messages

Black screen is in interactive and interactive text (console) mode

I want to install Solaris 10 on HP Proliant DL380 G5. After installing drivers for Smart Array (from CPQary3.iso) I can't see this:
"Starting Solaris Interactive (graphical user interface) Installation.
You must respond to the first question within 30 seconds or the installer
proceeds in a non-window environment (console mode)".
The screen now is black in both modes: interactive and interactive text (console)
If I don't install CPQary3 then graphical user interface works good, but "No disks found" :)
What can I do with it?
Edited by: Blutang on Jan 14, 2009 2:07 AM

well the problem has been solved...hope this may help others having this issue.
i basically just let the battery run out, then connected the ipod to my laptop and voila...it reset and all is well again...
pretty random, but glad it is all working again.

HT3529 I lost some text messages and I want to get them back. I tried an iTunes backup, but I ended up losing even more messages.

I lost some text messages and I want to get them back. I tried an iTunes backup, but I ended up losing even more messages? Can they be recovered?

Go to settings>messages>send and receive at>you can be reached by iMessages at> Uncheck your phone number and you can select your Apple ID emal address if you want to use that for messages.

Text Console Resolution

Hi, i have a problem ... how can i change text console resolution for ex. 1024x768 ?? I tried add vga=792 in grub kernel entry (like in RHEL) but it doesn't work. Can somebody help me ??

Hmm, i'm not sure if you can do that. On SPARC i think you can change it by editing the output-device variable in the OBP (even if i don't remember if that affects the text console). I'm not certain if its possible on an x86 platform.
.7/M.

I went to download pics from iPhone to laptop. In doing this it prompted me to register as a new phone or back up/ restore. I chose the 2nd. I lost pics, texts, emails. How do I reverse this?

How do I reverse a back up/ restore operation? I went to download photos and in doing so I lost emails, texts, notes... How do I reverse this?

Restore as New...
Redownload your Purchased and Free Apps using the Apple ID you Originally used...
iPhone User Guide
http://manuals.info.apple.com/en_US/iphone_user_guide.pdf

Beep on text console

Is it possible to deactivate the beep/bell in text console [not in X]
in Solaris 10? I am going crazy with that repugnant beep!
Very thanks,
gethostbyname

To do the kind of thing you are talking about you will need to implment a Java Bean in your form listen for the changes. Take a look at KeyEvent Java Bean or the Oracle Forms PJCs-Java Beans web site for more information and examples.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Keyboard lag in plain text console

Hi everybody!
I'm experiencing a strange keyboard lag on both of my two machines, but only in plain text console.
Both consoles uses framebuffer (in 1024x768 and 800x600 modes). There are kernel26, Xorg 7.0 and Xfce 4.2 on both machines. No special fb driver used (eg. no nvidiafb or vesa-tng).
One PC uses nv, another - nvidia driver. In X everything is OK.
Has anyone the same problem?

hi,
I have this problem, too, but it only appears on my virtual console #1, if I switch to 2,3, ... it works as it should.
Used kernel: arch 2.6.17-beyond
menu.lst entry:
kernel /boot/vmlinuz26beyond root=/dev/hda6 ro
initrd /boot/kernel26beyond.img
hightower

[Solved] Gnome-shell text turned to rectangles after botched upgrade

Hi all,
I've run into a problem that I just can't solve, so I was wondering if somebody with a lot of expertise could help out. My system has a couple of stability issues; it freezes up every few days, and I have to make a hard reboot (I think it's related to the video card, but I haven't had the funds to go get a better one yet). The last time it froze was during a pacman upgrade, and I had to reboot. At the new boot, after logging in, all of the gnome-shell letters turned to rectangles (see screenshot), and I had a bunch of other errors. I ran another upgrade Sync with pacman and rebooted; that took care of the errors, but the font problems still remained. The interesting thing is that the gdm window has no problems, I can see the icons on the top right just fine, and the date renders perfectly. It's only when I log in when the blocks occur, and they only occur on gnome-shell panel text (and on everything under Activities).
I have a 32-bit system that's fully migrated to systemd with open source radeon drivers. Here's some output of journalctl for the current boot, with stuff unrelated to the gnome-shell display removed (e.g. NetworkManager, UFW, etc). However, I didn't find any new errors compared to logs from before the upgrade.
-- Logs begin at Mon, 2012-09-10 23:14:10 PDT, end at Tue, 2012-09-11 18:52:58 PDT. --
Nov 17 12:26:09 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 17 12:26:10 Whitcomb dbus[232]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=235 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=311 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 17 12:26:11 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Nov 17 12:26:11 Whitcomb polkitd[315]: Started polkitd version 0.107
Nov 17 12:26:15 Whitcomb polkitd[315]: Loading rules from directory /etc/polkit-1/rules.d
Nov 17 12:26:15 Whitcomb polkitd[315]: Loading rules from directory /usr/share/polkit-1/rules.d
Nov 17 12:26:15 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 17 12:26:15 Whitcomb polkitd[315]: Finished loading, compiling and executing 2 rules
Nov 17 12:26:15 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 17 12:26:15 Whitcomb polkitd[315]: Acquired the name org.freedesktop.PolicyKit1 on the system bus
Nov 17 12:26:15 Whitcomb systemd[1]: Started Manage, Install and Generate Color Profiles.
Nov 17 12:26:15 Whitcomb systemd[1]: Started Authorization Manager.
Nov 17 12:26:15 Whitcomb kernel: ACPI: Power Button [PWRB]
Nov 17 12:26:15 Whitcomb kernel: input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
Nov 17 12:26:15 Whitcomb kernel: ACPI: Sleep Button [SLPB]
Nov 17 12:26:15 Whitcomb kernel: input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
Nov 17 12:26:15 Whitcomb kernel: ACPI: Power Button [PWRF]
Nov 17 12:26:15 Whitcomb kernel: input: PC Speaker as /devices/platform/pcspkr/input/input5
Nov 17 12:26:15 Whitcomb kernel: pci_hotplug: PCI Hot Plug PCI Core version: 0.5
Nov 17 12:26:15 Whitcomb kernel: shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
Nov 17 12:26:15 Whitcomb kernel: microcode: CPU0 sig=0xf34, pf=0x4, revision=0x8
Nov 17 12:26:15 Whitcomb kernel: parport_pc 00:0b: reported by Plug and Play ACPI
Nov 17 12:26:15 Whitcomb kernel: parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
Nov 17 12:26:15 Whitcomb kernel: agpgart: Detected VIA VT3314 chipset
Nov 17 12:26:15 Whitcomb kernel: agpgart-via 0000:00:00.0: AGP aperture is 128M @ 0xf0000000
Nov 17 12:26:15 Whitcomb kernel: psmouse serio1: hgpk: ID: 10 00 64
Nov 17 12:26:15 Whitcomb kernel: ppdev: user-space parallel port driver
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.PolicyKit1' unit='polkit.service'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 1 matched rules; type="method_call", sender=":1.2" (uid=0 pid=235 comm="/usr/sbin/gdm-binary ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.5" (uid=0 pid=311 comm="/usr/lib/gdm/gdm-simple-slave --display-id /org/gn")
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ColorManager' unit='colord.service'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.ColorManager'
Nov 17 12:26:15 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.PolicyKit1'
Nov 17 12:26:15 Whitcomb kernel: microcode: CPU1 sig=0xf34, pf=0x4, revision=0x8
Nov 17 12:26:15 Whitcomb kernel: microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
Nov 17 12:26:15 Whitcomb kernel: cfg80211: Calling CRDA to update world regulatory domain
Nov 17 12:26:15 Whitcomb kernel: via_rhine: v1.10-LK1.5.0 2010-10-09 Written by Donald Becker
Nov 17 12:26:15 Whitcomb kernel: via_rhine: Broken BIOS detected, avoid_D3 enabled
Nov 17 12:26:15 Whitcomb kernel: ACPI: PCI Interrupt Link [ALKD] enabled at IRQ 23
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: setting latency timer to 64
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: eth0: VIA Rhine II at 0x1cc00, 00:19:db:6a:70:49, IRQ 23
Nov 17 12:26:15 Whitcomb kernel: via-rhine 0000:00:12.0: eth0: MII PHY found at address 1, status 0x786d advertising 01e1 Link c1e1
Nov 17 12:26:15 Whitcomb kernel: input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
Nov 17 12:26:15 Whitcomb kernel: ath5k 0000:00:07.0: registered as 'phy0'
Nov 17 12:26:15 Whitcomb kernel: ath: EEPROM regdomain: 0x10
Nov 17 12:26:15 Whitcomb kernel: ath: EEPROM indicates we should expect a direct regpair map
Nov 17 12:26:15 Whitcomb kernel: ath: Country alpha2 being used: CO
Nov 17 12:26:15 Whitcomb kernel: ath: Regpair used: 0x10
Nov 17 12:26:15 Whitcomb kernel: ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
Nov 17 12:26:15 Whitcomb kernel: ath5k: phy0: Atheros AR5212 chip found (MAC: 0x56, PHY: 0x41)
Nov 17 12:26:15 Whitcomb kernel: ath5k: phy0: RF2112B 2GHz radio found (0x46)
Nov 17 12:26:15 Whitcomb kernel: ACPI: PCI Interrupt Link [ALKC] enabled at IRQ 22
Nov 17 12:26:15 Whitcomb kernel: snd_via82xx 0000:00:11.5: setting latency timer to 64
Nov 17 12:26:15 Whitcomb kernel: Adding 3903788k swap on /dev/sda2. Priority:-1 extents:1 across:3903788k
Nov 17 12:26:15 Whitcomb kernel: ip_tables: (C) 2000-2006 Netfilter Core Team
Nov 17 12:26:15 Whitcomb kernel: nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
Nov 17 12:26:15 Whitcomb kernel: ip6_tables: (C) 2000-2006 Netfilter Core Team
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event4 (Power Button)
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event2 (Power Button)
Nov 17 12:26:15 Whitcomb systemd-logind[229]: Watching system buttons on /dev/input/event3 (Sleep Button)
Nov 17 12:26:16 Whitcomb systemd[1]: PID file /run/deluge/deluged.pid not readable (yet?) after start.
Nov 17 12:26:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:16 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:16 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:16 Whitcomb systemd[1]: Started Network Manager.
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Network.
Nov 17 12:26:16 Whitcomb systemd[1]: Reached target Network.
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Network Time Service...
Nov 17 12:26:16 Whitcomb systemd[1]: Starting Mount Samba Shares...
Nov 17 12:26:16 Whitcomb systemd[1]: Started Mount Samba Shares.
Nov 17 12:26:17 Whitcomb systemd[1]: Started Deluge Daemon.
Nov 17 12:26:17 Whitcomb systemd[1]: Started Network Time Service.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Multi-User.
Nov 17 12:26:17 Whitcomb systemd[1]: Reached target Multi-User.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Graphical Interface.
Nov 17 12:26:17 Whitcomb systemd[1]: Reached target Graphical Interface.
Nov 17 12:26:17 Whitcomb systemd[1]: Starting Update UTMP about System Runlevel Changes...
Nov 17 12:26:17 Whitcomb systemd[1]: Started Update UTMP about System Runlevel Changes.
Nov 17 12:26:17 Whitcomb systemd[1]: Startup finished in 4s 827ms 48us (kernel) + 20s 199ms 872us (userspace) = 25s 26ms 920us.
Nov 17 12:26:19 Whitcomb kernel: fuse init (API version 7.20)
Nov 17 12:26:19 Whitcomb systemd[1]: Mounting FUSE Control File System...
Nov 17 12:26:19 Whitcomb systemd[1]: Mounted FUSE Control File System.
Nov 17 12:26:19 Whitcomb gdm-simple-slave[311]: WARNING: Failed to give slave programs access to the display. Trying to proceed.
Nov 17 12:26:19 Whitcomb kernel: nf_conntrack: automatic helper assignment is deprecated and it will be removed soon. Use the iptables CT target to attach helpers instead.
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.Accounts' unit='accounts-daemon.service'
Nov 17 12:26:20 Whitcomb systemd[1]: Starting Accounts Service...
Nov 17 12:26:20 Whitcomb accounts-daemon[371]: started daemon version 0.6.25
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.Accounts'
Nov 17 12:26:20 Whitcomb systemd[1]: Started Accounts Service.
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating service name='org.freedesktop.nm_dispatcher' (using servicehelper)
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.nm_dispatcher'
Nov 17 12:26:20 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Nov 17 12:26:20 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.ConsoleKit' unit='console-kit-daemon.service'
Nov 17 12:26:20 Whitcomb systemd[1]: Starting Console Manager...
Nov 17 12:26:21 Whitcomb console-kit-daemon[376]: missing action
Nov 17 12:26:21 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Nov 17 12:26:21 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.ConsoleKit'
Nov 17 12:26:21 Whitcomb systemd[1]: Started Console Manager.
Nov 17 12:26:21 Whitcomb systemd-logind[229]: New session 1 of user gdm.
Nov 17 12:26:21 Whitcomb systemd-logind[229]: Linked /tmp/.X11-unix/X0 to /run/user/120/X11-display.
Nov 17 12:26:25 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Nov 17 12:26:25 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UPower' unit='upower.service'
Nov 17 12:26:25 Whitcomb systemd[1]: Starting Daemon for power management...
Nov 17 12:26:25 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.UPower'
Nov 17 12:26:25 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.UPower'
Nov 17 12:26:25 Whitcomb systemd[1]: Started Daemon for power management.
Nov 17 12:26:27 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Nov 17 12:26:28 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Nov 17 12:26:27 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.RealtimeKit1' unit='rtkit-daemon.service'
Nov 17 12:26:28 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.RealtimeKit1'
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully called chroot.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully dropped privileges.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully limited resources.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Canary thread running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Watchdog thread running.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Successfully made thread 523 of process 523 (/usr/bin/pulseaudio) owned by '120' high priority at nice level -11.
Nov 17 12:26:28 Whitcomb rtkit-daemon[524]: Supervising 1 threads of 1 processes of 1 users.
Nov 17 12:26:28 Whitcomb pulseaudio[523]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Nov 17 12:26:29 Whitcomb pulseaudio[523]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Nov 17 12:26:29 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:29 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:29 Whitcomb pulseaudio[523]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:30 Whitcomb kernel: [UFW BLOCK] IN=eth0 OUT= MAC=00:19:db:6a:70:49:00:18:74:eb:98:00:08:00 SRC=158.181.47.4 DST=131.215.169.100 LEN=129 TOS=0x00 PREC=0x00 TTL=108 ID=9372 PROTO=UDP SPT=6881 DPT=50753 LEN=109
Nov 17 12:26:27 Whitcomb systemd[1]: Starting RealtimeKit Scheduling Policy Service...
Nov 17 12:26:28 Whitcomb systemd[1]: Started RealtimeKit Scheduling Policy Service.
Nov 17 12:26:30 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:26:30 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:26:30 Whitcomb kernel: EXT4-fs (sda1): re-mounted. Opts: commit=0
Nov 17 12:26:34 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Nov 17 12:26:34 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.freedesktop.UDisks2' unit='udisks2.service'
Nov 17 12:26:34 Whitcomb systemd[1]: Starting Disk Manager...
Nov 17 12:26:34 Whitcomb udisksd[566]: udisks daemon version 2.0.0 starting
Nov 17 12:26:35 Whitcomb dbus-daemon[232]: dbus[232]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 17 12:26:35 Whitcomb dbus[232]: [system] Successfully activated service 'org.freedesktop.UDisks2'
Nov 17 12:26:35 Whitcomb systemd[1]: Started Disk Manager.
Nov 17 12:26:35 Whitcomb udisksd[566]: Acquired the name org.freedesktop.UDisks2 on the system message bus
Nov 17 12:26:37 Whitcomb polkitd[315]: Registered Authentication Agent for unix-session:1 (system bus name :1.37 [gnome-shell --mode=gdm], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8)
Nov 17 12:26:37 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.37" (uid=120 pid=541 comm="gnome-shell --mode=gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:26:37 Whitcomb dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.37" (uid=120 pid=541 comm="gnome-shell --mode=gdm ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:06 Whitcomb systemd[1]: Starting File System Check on /dev/sdb1...
Nov 17 12:27:07 Whitcomb systemd-fsck[582]: /dev/sdb1: clean, 157018/24420352 files, 88519245/97677200 blocks
Nov 17 12:27:07 Whitcomb systemd[1]: Started File System Check on /dev/sdb1.
Nov 17 12:27:07 Whitcomb systemd[1]: Mounting /home...
Nov 17 12:27:07 Whitcomb systemd[1]: Mounted /home.
Nov 17 12:27:07 Whitcomb kernel: EXT4-fs (sdb1): mounted filesystem with ordered data mode. Opts: (null)
Nov 17 12:27:13 Whitcomb gdm-password][594]: pam_unix(gdm-password:session): session opened for user gregory by (unknown)(uid=0)
Nov 17 12:27:13 Whitcomb gdm-password][594]: pam_ck_connector(gdm-password:session): nox11 mode, ignoring PAM_TTY :0
Nov 17 12:27:13 Whitcomb systemd-logind[229]: New session 2 of user gregory.
Nov 17 12:27:13 Whitcomb systemd-logind[229]: Linked /tmp/.X11-unix/X0 to /run/user/1001/X11-display.
Nov 17 12:27:13 Whitcomb gnome-session[443]: WARNING: Detected that screensaver has left the bus
Nov 17 12:27:13 Whitcomb gnome-session[443]: CRITICAL: gsm_manager_set_phase: assertion `GSM_IS_MANAGER (manager)' failed
Nov 17 12:27:13 Whitcomb polkitd[315]: Unregistered Authentication Agent for unix-session:1 (system bus name :1.37, object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.UTF-8) (disconnected from bus)
Nov 17 12:27:13 Whitcomb gdm-simple-slave[311]: WARNING: Failed to remove slave program access to the display. Trying to proceed.
Nov 17 12:27:15 Whitcomb gnome-keyring-daemon[601]: Gkm: using old keyring directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:15 Whitcomb gnome-keyring-daemon[601]: Gkm: using old keyring directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:16 Whitcomb rtkit-daemon[524]: Successfully made thread 666 of process 666 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
Nov 17 12:27:16 Whitcomb rtkit-daemon[524]: Supervising 4 threads of 2 processes of 2 users.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] sink.c: Default and alternate sample rates are the same.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] source.c: Default and alternate sample rates are the same.
Nov 17 12:27:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:27:16 Whitcomb dbus-daemon[232]: dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:16 Whitcomb dbus[232]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Nov 17 12:27:16 Whitcomb dbus[232]: [system] Activation via systemd failed for unit 'dbus-org.bluez.service': Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:16 Whitcomb pulseaudio[666]: [pulseaudio] bluetooth-util.c: org.bluez.Manager.ListAdapters() failed: org.freedesktop.systemd1.LoadFailed: Unit dbus-org.bluez.service failed to load: No such file or directory. See system logs and 'systemctl status dbus-org.bluez.service' for details.
Nov 17 12:27:17 Whitcomb gnome-session[603]: Gtk-WARNING: Failed to parse /home/gregory/.config/gtk-3.0/settings.ini: Key file does not have group 'Settings'
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "gnome-do" (No such file or directory)
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "JRSST" (No such file or directory)
Nov 17 12:27:19 Whitcomb gnome-session[603]: WARNING: Failed to start app: Unable to start application: Failed to execute child process "tasque" (No such file or directory)
Nov 17 12:27:19 Whitcomb rtkit-daemon[524]: Successfully made thread 705 of process 705 (/usr/bin/pulseaudio) owned by '1001' high priority at nice level -11.
Nov 17 12:27:19 Whitcomb rtkit-daemon[524]: Supervising 5 threads of 3 processes of 2 users.
Nov 17 12:27:19 Whitcomb pulseaudio[705]: [pulseaudio] pid.c: Daemon already running.
Nov 17 12:27:26 Whitcomb goa[766]: goa-daemon version 3.6.2 starting [main.c:112, main()]
Nov 17 12:27:26 Whitcomb dbus-daemon[232]: dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1001 pid=672 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:26 Whitcomb dbus[232]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.55" (uid=1001 pid=672 comm="/usr/bin/gnome-shell ") interface="org.freedesktop.DBus.Properties" member="GetAll" error name="(unset)" requested_reply="0" destination=":1.14" (uid=0 pid=376 comm="/usr/sbin/console-kit-daemon --no-daemon ")
Nov 17 12:27:26 Whitcomb gnome-keyring-daemon[601]: keyring alias directory: /home/gregory/.gnome2/keyrings
Nov 17 12:27:27 Whitcomb polkitd[315]: Registered Authentication Agent for unix-session:2 (system bus name :1.55 [/usr/bin/gnome-shell], object path /org/freedesktop/PolicyKit1/AuthenticationAgent, locale en_US.utf8)
Nov 17 12:27:30 Whitcomb kernel: end_request: I/O error, dev fd0, sector 0
Nov 17 12:27:30 Whitcomb kernel: end_request: I/O error, dev fd0, sector 0
Nov 17 12:27:33 Whitcomb systemd-logind[229]: Removed session 1.
I tried using gnome-tweak tool to fiddle around with the fonts, but that didn't help, none of the fonts would render correctly. Cantarell, which I'm assuming is the gnome-shell font, is still in /etc/fonts/conf.avail, so I don't think that the font file itself went missing. I made the fontconfig update a while ago, and that didn't cause any problems.
I also heard that there were problems with xorg-server, so I downgraded xorg-server, pixman, and cairo to their previous versions, but that didn't help either. EDIT: I've also done a pacman -Syyf gnome-shell to try and reinstall gnome-shell. That also didn't work.
I've run out of things to try. If someone else was more familiar with the workings of gnome-shell fonts, or had a better idea of how to debug, I'd really appreciate it. Thank you.
UPDATE: I found that /etc/fonts/conf.avail/31-cantarell.conf existed, but was empty. After doing a pacman -Syyf cantarell-fonts, they went right back to normal!
Last edited by cactaur (2012-11-20 00:21:27)

Problem disappeared.
I'm not sure, but i think installing xf86-video-modesetting helped to fix this issue.
I had an error messages in /var/log/Xorg.0.log like this:
(EE) Failed to load module "modesetting" (module does not exist, 0)

Lost my Text icon

I have Blackberry 8900, work just fine but lost text messaging icon and so cannot text. How do i recover my Text Icon back.

Hey Goberry,
To bring back you text messaging icon, check to see if it is hidden first by pressing the menu key on the home screen and select show all.
If it is still hidden, you may need to reload the software: http://t.co/FRktoq1
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Blackberry 9330 - Lost My Text Ringtones

Within the past three weeks I've lost the ability to set specific ringtones/text tones for texts from individual contacts. Everything was functioning fine until about three weeks ago; I can set specific ringtones for phone calls, but now the 9330 won't let me set tones for text messages for specific contacts. Anyone have a solution?

Hey Goberry,
To bring back you text messaging icon, check to see if it is hidden first by pressing the menu key on the home screen and select show all.
If it is still hidden, you may need to reload the software: http://t.co/FRktoq1
-ViciousFerret
Come follow your BlackBerry Technical Team on Twitter! @BlackBerryHelp
Be sure to click Like! for those who have helped you.
Click Accept as Solution for posts that have solved your issue(s)!

Did system update--lost all texts and BBM texts

The latest update went smoothly enough, but when my Q10 woke up again, and I reconnected to my email accounts, my whole history of texts and BBM messages were gone! Did this happen to others?
Can anything be done?? Thanks for any help.

I was able to help some other users restore a previous backup to regain their lost SMS history.
I don't know why yours did not restore. Restoring the backup will always result in a need to update passwords as that is simply a security measure and to reinitiate your link to that account. Nothing uncommon there.
I wish I could help you with the lost SMS, but it sounds like you have done exactly what I would have advised you.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Mplayer doesn't play video in text console

I am trying to use mplayer in my text-based console/terminal without the X window system. When I play a video, the sound is fine but the video output just shows a few text characters moving and that's it, no video. Is there something I must type after the mplayer command or set a certain preference for graphics/video?
My xorg.conf file has:
Driver "intel"
VendorName "Intel Corporation"
BoardName "82810E DC-133 (CGC) Chipset Graphics Controller"
And the output for mplayer -vo help is:
MPlayer SVN-r30526-4.4.3 (C) 2000-2010 MPlayer Team
Available video output drivers:
vdpau VDPAU with X11
xv X11/Xv
x11 X11 ( XImage/Shm )
xover General X11 driver for overlay capable video output drivers
gl X11 (OpenGL)
gl2 X11 (OpenGL) - multiple textures version
matrixview MatrixView (OpenGL)
dga DGA ( Direct Graphic Access V2.0 )
sdl SDL YUV/RGB/BGR renderer (SDL v1.1.7+ only!)
fbdev Framebuffer Device
fbdev2 Framebuffer Device
aa AAlib
caca libcaca
v4l2 V4L2 MPEG Video Decoder Output
xvidix X11 (VIDIX)
cvidix console VIDIX
null Null video output
xvmc XVideo Motion Compensation
mpegpes MPEG-PES to DVB card
yuv4mpeg yuv4mpeg output for mjpegtools
png PNG file
jpeg JPEG file
gif89a animated GIF output
tga Targa output
pnm PPM/PGM/PGMYUV file
md5sum md5sum of each frame
142 audio & 332 video codecs
Does anyone know what I should do?
Last edited by ih23 (2010-02-13 17:39:38)

Here is the output for "mplayer -v -vo fbdev":
CPU vendor name: GenuineIntel max cpuid level: 2
CPU: Intel(R) Celeron(TM) CPU 1400MHz (Family: 6, Model: 11, Stepping: 1)
extended cpuid-level: 4
Detected cache-line size is 32 bytes
Testing OS support for SSE... yes.
Tests of OS support for SSE passed.
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNowExt: 0 SSE: 1 SSE2: 0 SSSE3: 0
Compiled with runtime CPU detection.
get_path('codecs.conf') -> '/home/isaias/.mplayer/codecs.conf'
Reading /home/isaias/.mplayer/codecs.conf: Can't open '/home/isaias/.mplayer/codecs.conf': No such file or directory
Reading /etc/mplayer/codecs.conf: 142 audio & 332 video codecs
Configuration: --prefix=/usr --enable-runtime-cpudetection --disable-gui --disable-arts --disable-liblzo --disable-speex --disable-openal --disable-fribidi --disable-libdv --disable-musepack --disable-esd --disable-mga --enable-xvmc --language=all --confdir=/etc/mplayer --extra-cflags=-fno-strict-aliasing
CommandLine: '-v' '-vo' 'fbdev' 'Gods and Generals CD 01 of 02.avi'
init_freetype
Using MMX (with tiny bit MMX2) Optimized OnScreenDisplay
get_path('fonts') -> '/home/isaias/.mplayer/fonts'
Using nanosleep() timing
get_path('input.conf') -> '/home/isaias/.mplayer/input.conf'
Can't open input config file /home/isaias/.mplayer/input.conf: No such file or directory
Parsing input config file /etc/mplayer/input.conf
Input config file /etc/mplayer/input.conf parsed: 90 binds
Setting up LIRC support...
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
get_path('Gods and Generals CD 01 of 02.avi.conf') -> '/home/isaias/.mplayer/Gods and Generals CD 01 of 02.avi.conf'
Playing Gods and Generals CD 01 of 02.avi.
get_path('sub/') -> '/home/isaias/.mplayer/sub/'
[file] File size is 1342103508 bytes
STREAM: [file] Gods and Generals CD 01 of 02.avi
STREAM: Description: File
STREAM: Author: Albeu
STREAM: Comment: based on the code from ??? (probably Arpi)
LAVF_check: AVI format
AVI file format detected.
list_end=0x228A
======= AVI Header =======
us/frame: 33366 (fps=29.971)
max bytes/sec: 0
padding: 0
MainAVIHeader.dwFlags: (2320) HAS_INDEX IS_INTERLEAVED TRUST_CKTYPE
frames total: 202520 initial: 0
streams: 2
Suggested BufferSize: 1048576
Size: 640 x 360
==========================
list_end=0x10F0
==> Found video stream: 0
[aviheader] Video stream found, -vid 0
====== STREAM Header =====
Type: vids FCC: XVID (44495658)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 30000/1001 = 29.970
Start: 0 Len: 202520
Suggested BufferSize: 1048576
Quality -1
Sample size: 0
==========================
Found 'bih', 40 bytes of 40
======= VIDEO Format ======
biSize 40
biWidth 640
biHeight 360
biPlanes 1
biBitCount 24
biCompression 1145656920='XVID'
biSizeImage 691200
===========================
Regenerating keyframe table for MPEG-4 video.
list_end=0x217E
==> Found audio stream: 1
[aviheader] Audio stream found, -aid 1
====== STREAM Header =====
Type: auds FCC: (1)
Flags: 0
Priority: 0 Language: 0
InitialFrames: 0
Rate: 1225/32 = 38.281
Start: 0 Len: 258684
Suggested BufferSize: 12288
Quality -1
Sample size: 0
==========================
Found 'wf', 30 bytes of 18
======= WAVE Format =======
Format Tag: 85 (0x55)
Channels: 2
Samplerate: 44100
avg byte/sec: 16000
Block align: 1152
bits/sample: 0
cbSize: 12
mp3.wID=1
mp3.fdwFlags=0x2
mp3.nBlockSize=1152
mp3.nFramesPerBlock=1
mp3.nCodecDelay=1393
==========================================================================
list_end=0x4F8E468C
Found movie at 0x2296 - 0x4F8E468C
Reading INDEX block, 461204 chunks for 202520 frames (fpos=1334724244).
AVI index offset: 0x2292 (movi=0x2296 idx0=0x4 idx1=0xA22)
Auto-selected AVI video ID = 0
Auto-selected AVI audio ID = 1
AVI: Searching for audio stream (id:1)
XXX initial v_pts=0.100 a_pos=0 (0.000)
AVI video size=1222794219 (202520) audio size=108119353 (258684)
VIDEO: [XVID] 640x360 24bpp 29.970 fps 1447.6 kbps (176.7 kbyte/s)
Auto-selected AVI audio ID = 1
[V] filefmt:3 fourcc:0x44495658 size:640x360 fps:29.970 ftime:=0.0334
get_path('sub/') -> '/home/isaias/.mplayer/sub/'
using /dev/fb0
Can't open /dev/fb0: No such file or directory
Error opening/initializing the selected video_out (-vo) device.
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
dec_audio: Allocating 4608 + 65536 = 70144 bytes for output buffer.
mp3lib: using SSE optimized decore!
MP3lib: init layer2&3 finished, tables done
MPEG 1.0, Layer III, 44100 Hz 128 kbit Joint-Stereo, BPF: 417
Channels: 2, copyright: No, original: Yes, CRC: No, emphasis: 0
AUDIO: 44100 Hz, 2 ch, s16le, 128.0 kbit/9.07% (ratio: 16000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
Building audio filter chain for 44100Hz/2ch/s16le -> 0Hz/0ch/??...
[libaf] Adding filter dummy
[dummy] Was reinitialized: 44100Hz/2ch/s16le
[dummy] Was reinitialized: 44100Hz/2ch/s16le
Trying every known audio driver...
ao2: 44100 Hz 2 chans s16le
audio_setup: using '/dev/dsp' dsp device
audio_setup: using '/dev/mixer' mixer device
audio_setup: using 'pcm' mixer device
audio_setup: sample format: s16le (requested: s16le)
audio_setup: using 2 channels (requested: 2)
audio_setup: using 44100 Hz samplerate (requested: 44100)
audio_setup: frags: 16/16 (4096 bytes/frag) free: 65536
AO: [oss] 44100Hz 2ch s16le (2 bytes per sample)
AO: Description: OSS/ioctl audio output
AO: Author: A'rpi
Building audio filter chain for 44100Hz/2ch/s16le -> 44100Hz/2ch/s16le...
[dummy] Was reinitialized: 44100Hz/2ch/s16le
[dummy] Was reinitialized: 44100Hz/2ch/s16le
Video: no video
Freeing 3 unused video chunks.
Starting playback...
Increasing filtered audio buffer size from 0 to 65536
Uninit audio filters...9.7 (23:10:19.7) 1.0%
[libaf] Removing filter dummy
Uninit audio: mp3lib
vo: x11 uninit called but X11 not initialized..

Lost WP Text = Recovery Possible?

I've lost text in an AppleWorks Word Processing file. Here's what happened:
I opened a new file, gave it a name, and saved it to my desktop.
I wrote and perodically saved my work from the keyboard using Command-S.
While the document was open, I then changed the file name by clicking on the desktop icon and typing a new name.
Clicking back in the document I saw the new name replace the old one and continued typing.
I typed several thousand words saving as I went along.
I then quit and shut down my computer.
Several hours later I started the computer and double clicked on the desktop icon.
The file opened to the place where I made the name change. The added text, after the name change, was gone.
Is this text recoverable?
All this work was done on an iBook G3 running MacOS 10.4.6, AppleWorks version 6.2.7
Thank you for your assistance. - Fabe
Message was edited by: Fabini

Is this text recoverable?
You did one of two things while this file was open in AppleWorks, renamed the file in the Finder or moved the File in the Finder, that will "break" AppleWorks' connection to the file. Unless you had a program running in the background that records keyboard input, I'm afraid your work is lost & you will have to re-do it. There are two user tips dealing with this:
Dale Gillard - Document content not saved
Vic Menard - AppleWorks fails to save properly

[SOLVED] Dead keys on console in UTF-8 locale

Hello,
I want to share something interesting I found out about dead keys support on the Linux console (i.e., without X).
I live in Canada and use the "Canadian French" keyboard, which uses dead keys for several diacritical marks (e.g., to type ê I push and release the ^ key, then type the e key). It works perfectly under X, but I was unable to type any character using dead keys on the console. On the other hand, non-ASCII characters like "é" that do not use dead keys worked perfectly.
After some googling, I found many posts claiming the kernel did not support dead keys when the console was in Unicode mode. So I changed the locale to a non-UTF-8 setting in /etc/rc.conf, and indeed dead keys started working. But this was not useful to me, since editing UTF-8 files resulted in gibberish, and I did not want to regress back to Latin1 encoding or have to support both encodings. I tried many combinations of settings, but none worked. For a few days, I thought there was no way to have dead keys and Unicode working on the Console.
But then I started to install Arch Linux on another computer and noticed that when I set the keyboard to Canadian French with the "km" utility before installing (the keymap is called "cf"), dead keys worked, even though the locale was Unicode! So there was a way to do it.
I started digging and trying new things, and found out that after the following incantations, I was able to enable dead keys for Unicode on the console:
kbd_mode -a
sudo loadkeys cf
kbd_mode -u
This sets the console to ASCII mode, loads the "cf" keymap, and sets the console back to Unicode. I found it by trial and error, and I have no idea why it works or whether it breaks anything. I'm posting here to ask if there are easier ways to have a functional Canadian French keyboard on the console, and to document what I did in case someone has a similar problem.
Last edited by pguertin (2010-01-23 21:44:33)

I have the exact same issue.
The weird thing for me is that before I was using gentoo and never had a problem with dead keys and unicode. Also, I confirm that dead keys is working when booting from the archlinux installation cd. Either run 'loadkeys cf' rigth after login or pass 'keymap=cf' as a boot parameter to the kernel line by editing it in grub before booting.
Your solution is interesting, however the cf.map.gz file is the same on the installation cd (and on my gentoo system) so it should works without editing it.
In my quest to solve this issue, I found something interesting. I added the 'keymap' hook in /etc/mkinitcpio.conf and regenerated the image by issuing
mkinitcpio -g /boot/kernel26.img
This alone didn't solved the issue, but then I REMOVED the keymap assignation in /etc/rc.conf (i.e. leaving it as
KEYMAP=
), rebooted... and voilà, it now works.
Furthermore, now if I run
sudo loadkeys cf
after login it stops working (well of course because it's the same as defining KEYMAP="cf" in /etc/rc.conf). Issuing the 3 commands of your first post make it works again. OK so I did one more test: boot from the archlinux installation cd by adding the 'keymap=cf' boot parameter to the kernel line and then run 'loadkeys cf' after login to see if it breaks dead keys. But no, it still works.
So is this issue comes from a newer version of the kernel/loadkeys/mkinitcpio/...? How different is the kernel and initramfs images of the installation cd compared to the installed system ?

I lost my texts! Can I get them back using Vzw Cloud???

Okay so that basically explains it all but to break it down again.
I recently lost all of my texts; I have no clue how it happened I just need some of them back for business information. I have them all backed up via Verizon Cloud but I don't see a way to sync them back to my phone. Is this an option or am I just missing something? Thanks in advance for the help!

Unfortunately, no, Verizon only keeps messages on their servers for a few days once delivered, and not much longer if they are not received. Even if they are still on their servers, it takes a court order to get them.

[SOLVED] Lost my text console

Similar Messages

Maybe you are looking for