[SOLVED] Lost translations

Hi,
A few weeks ago (maybe 2-3) after a usual upgrade and a reboot, I noticed that most of the apps were not translated anymore (in French). I assumed this was due to the upgrade and that translations would come back shortly. But it's been a while now and I still miss them.
For information it's not a global problem, I'm using Mate 1.8 and all items in the System > Preferences or Administration are in French. But "Lock screen" is "Lock screen", same for "Logout" or "Shutdown...". All labels in Caja, Geany, Rhythmbox, etc. are in English too, same for Firefox and Thunderbird.
Of course I tried regenerating the locales but it didn't change anything.
Did I miss something? What should I try to fix this?
Last edited by nanawel (2014-05-22 11:51:26)

Fixed it. It seemed that my /etc/locale.conf was wrong.
Here's the working one:
LANG="fr_FR.UTF-8"
LC_COLLATE="C"
LANGUAGE="fr_FR"
Then to apply of course:
# locale-gen

Similar Messages

[SOLVED] Lost Sound After Upgrade

Solved (for now at least). The problem appears to be a bug with alsa. Alsaconf writes a file called /etc/modprobe.d/50-sound.conf, which contains the aliases for the sound card. But for some reason it then wasn't reading the file. Copying the alias entries to /etc/modprobe.d/modprobe.conf to read directly from there seems to have worked.
Now to fix the frequency scaling.
===================== solved ===========================
I lost all sound after the last upgrade. I just rebooted because frequency scaling is also not working, and no sound.
all drivers seem to be there:
08:50 AM:~ $ lsmod |grep snd
snd_mpu401_uart 9264 0
snd_hda_codec_realtek 278132 1
snd_cs46xx 96800 1
snd_seq_dummy 3540 0
gameport 13760 2 snd_cs46xx
snd_hda_intel 31208 3
snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 9976 1 snd_hda_codec
snd_rawmidi 26592 2 snd_mpu401_uart,snd_cs46xx
snd_ac97_codec 133560 1 snd_cs46xx
snd_seq_oss 36224 0
snd_seq_midi_event 8592 1 snd_seq_oss
snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
snd_seq_device 8324 4 snd_seq_dummy,snd_rawmidi,snd_seq_oss,snd_seq
snd_pcm_oss 47328 0
snd_pcm 90872 5 snd_cs46xx,snd_hda_intel,snd_hda_codec,snd_ac97_codec,snd_pcm_oss
snd_timer 25344 2 snd_seq,snd_pcm
snd_page_alloc 10784 3 snd_cs46xx,snd_hda_intel,snd_pcm
snd_mixer_oss 20976 2 snd_pcm_oss
snd 76744 21 snd_mpu401_uart,snd_hda_codec_realtek,snd_cs46xx,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 8576 2 snd
ac97_bus 2160 1 snd_ac97_codec
I don't see anything in the updated packages that might cause this:
[2009-08-09 18:09] upgraded gawk (3.1.6-3 -> 3.1.7-1)
[2009-08-09 18:09] upgraded gimp (2.6.6-2 -> 2.6.6-3)
[2009-08-09 18:09] upgraded imagemagick (6.5.4.5-1 -> 6.5.4.8-1)
[2009-08-09 18:09] upgraded kdelibs3 (3.5.10-5 -> 3.5.10-7)
[2009-08-09 18:09] upgraded mkinitcpio (0.5.25-1 -> 0.5.26-1)
[2009-08-09 18:09] upgraded polkit-qt (0.9.2-1 -> 0.9.2-2)
[2009-08-09 18:09] upgraded psmisc (22.7-1 -> 22.8-1)
[2009-08-09 18:09] upgraded python-pygame (1.9.0-1 -> 1.9.1-1)
[2009-08-09 18:09] upgraded python-pysqlite (2.4.1-2 -> 2.5.5-1)
[2009-08-09 18:09] upgraded readline (6.0.003-3 -> 6.0.004-1)
[2009-08-09 18:09] Fixing gshadow file ...
[2009-08-09 18:09] upgraded shadow (4.1.4.1-1 -> 4.1.4.2-1)
I tried firefox, xine, mythfrontend, avidemux2, xmms and mpg123 - there's no sound in any app. If I play something where there are indicators, like in xmms, the eq indicator levels jump, the song progresses like it's playing, but no sound. I reran alsaconf, it seems to be configured properly. The mixer sliders work and aren't muted. It doesn't work either as root or as user.
I have another computer hooked up through the line out and the sound still works fine there, so it doesn't appear to be a hardware problem.
I'm completely stumped at this point. If it's a bug somewhere, what's it a bug in to cause global sound loss? Is there anything else I'm overlooking? All I can think is that it must be muted somewhere, but I can't find it. Or else it has something to do with the cpu and cpu freq scaling that's also broken now.
===================== solved ===========================
Last edited by userlander (2009-08-10 15:04:45)

Try this - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
iPhone: Can't hear through the receiver or speakers
http://support.apple.com/kb/ts1630
http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
 Cheers, Tom

Desktop version lost translation and keyboard problems

I have started last week with Story Plus and installed the desktop version (Build 1062) in german. Worked fine until sunday this week. It seems that there has been an update to 1063. After the update the deskop version lost the german translation and i do not know how to switch back to german again. The online version is still german.
I also encountered some other problems:
* Sign out is not working: First click, nothing happens. Second click the app crashes with a windows error (desktop version)
* ALT GR + Q is not working. On a german keyboard this gives the @ (problem in english desktop and german online version)
* Typing problems after using ALT GR (german online version) If i press ALT GR+Q to get the @ sign, it will not work and typing is not working anymore. If i switch to an other browser tab and back to Story, it will work again. This problems just happens in my german online version.
Working on Win7/64 Bit
IE 9.0
German Keyboard Layout

Hi,
Below is an update of your queries:
* Typing problems after using ALT GR (german online version) If i press ALT GR+Q to get the @ sign, it will not work and typing is not working anymore. If i switch to an other browser tab and back to Story, it will work again. This problems just happens in my german online version.
We have identified the issue and will work on the fix. Meanwhile if you face this issue, the workaround is to press 'Ctrl' key.
* Zoom (Adjust to Width) does not auto adjust if i hide the left panel. Instead the menu items loses it's selection tick.
Yes, zoom level does not update automatically. You will have to choose the 'Adjust to width' option again.
* I have created a second project and shared it with a friend. My friend got an email and can access it, but in my project list i still see "none" in the share column. This worked in the past (1062) for an other project.
Drop me a mail at 'roverma <at> adobe <dot> com' if you are still facing this issue.
Thanks
Rohit
Adobe Story Team

[SOLVED] Lost Tuba CineBass booster

Hi all. I have Acer Aspire 5739g and after upgrade kernel to version 3.3.1 sound lost low frequencies. I watched this topic and hoped, that after bump to 3.3.3 this problem will disappear, but nothing has change. On linux-lts all works fine.
my modprobe.conf contains the following lines:
options snd-hda-intel model=acer-aspire-6530g
options snd-hda-intel enable_msi=1
Maybe someone has the same model without this problem? I also thought to send a bug report to developers, but i don't know how and to whom
P.S. Sorry for my English, it is not very good.
Last edited by l'enfant terrible (2012-04-28 20:56:28)

After viewing the source code linux-lts, to solve this problem, I wrote a patches, they work for my Acer Aspire 5739g with
options snd-hda-intel model=acer-aspire-6530g
options snd-hda-intel enable_msi=1
in modprobe.conf and must work for Acer Aspire 6530g
alc882_quirks.patch
patch_realtek.patch

[SOLVED] Lost MAC address on network card

It seems that my wired ethernet card has lost its MAC address. Some information/output:
# lspci|grep Ethernet
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller
The card uses the sky2 kernel module
# dmesg|grep sky2
sky2 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
sky2 0000:02:00.0: setting latency timer to 64
sky2 0000:02:00.0: v1.22 addr 0xf7dfc000 irq 16 Yukon-2 EC Ultra rev 2
sky2 eth0: addr 00:00:00:00:00:00
Adding a line
#ifconfig eth0 hw ether <random-address-here>
to the startup-scripts makes it possible to use the nic, but it seems like a very temporary solution.
I don't know what can have caused this. Maybe the winter cold here in Norway erased some part of the nic's ROM?
- Does anybody have any idea how I can remedy this?
- Do I have to send the laptop in for repair to get it restored?
Last edited by kapelrud (2008-12-05 16:35:54)

iBertus wrote:I suppose a driver bug could have corrupted the ROM on the network card. Do you have a Windows install that you can boot into to see if the card is working correctly with those drivers?
Using "ipconfig /all" on windows showed the same zeroed mac address, so I guess the problem isn't (wasn't) linux-specific.
I left the pc in my locker at school last night and when I started it up again this morning the mac had mysteriously returned! Maybe the university leprechaun was bored yesterday.
So I guess the problem is solved, for now... Thanks anyway!

Lost translations

Hi people,
I did an upgrade of R3 4.7 to ECC 6.0, but I get the problem that several translations are lost. Which is the step for to save this translation an import again after the upgrade????
More thanks

Fixed it. It seemed that my /etc/locale.conf was wrong.
Here's the working one:
LANG="fr_FR.UTF-8"
LC_COLLATE="C"
LANGUAGE="fr_FR"
Then to apply of course:
# locale-gen

[Solved] Lost sound with xMonad

Hello,
I lost the sound when I run xMonad. When I run gnome everything works fine. Someone from the xMonad mailing list said I must be forgetting to start alsa or pulseaudio daemons. How do I do that?
Thanks!
Last edited by eskatrem (2012-07-16 19:33:49)

I ran alsamizer and turned the volume to maximum for everything.
EDIT: I set myself in the audio group, but still unable to get any sound
speaker-test does this (before I interrupt it, it seems to do something forever):
speaker-test 1.0.25
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
Time per period = 2.665351
0 - Front Left
Time per period = 2.986627
0 - Front Left
Time per period = 2.986616
0 - Front Left
Time per period = 2.986630
0 - Front Left
Last edited by eskatrem (2012-07-16 14:19:41)

[SOLVED] Lost mimetypes

After last update (today), KDE has lost most of the file associations, and all files are displayed in the environment as text files. Searching through the forums do not just find out what the problem is. Does anyone ever thought something like this?
Last edited by kagan (2011-06-16 19:33:30)

Remove icon-cache.kcache has not worked. I've noticed that even deleting my /home/user/.kde4 the problem was still there. Finally I decided to reinstall kde again and the error has been fixed.
Thanks anyway.
Last edited by kagan (2011-06-16 19:34:24)

[SOLVED] Lost write permissions ~/ directory since migrating to F2FS

I recently moved my /home directory on to a partition that is formatted with the F2FS file system. Since doing that my regular user can no longer write to the ~/ directory even though the folder permissions look OK.
So my permissions for my /home/marko directory are:
drwx------ marko users
("marko" owning the directory)
And the partition it is located on is formatted with f2fs with the following mount options in fstab:
defaults,rw,nofail,noatime
Last edited by marko2010 (2015-06-01 23:17:24)

Thanks, I just realized problem is actually due to user error. I'm so used to my usual shell starting me in my user directory that I did not realize the new shell I was using was actually starting me in the "/" directory (as a regular user). I'll mark this "solved," and my apologies for the wild goose chase.

[SOLVED] lost pacman sync db of installd pakages

hi.
as I said, I lost pacman database off installd pakages.
─(simke@philander:pts/0)─────────────────────────────────────────────────(~)─┐
└─(21:33:%)── pacman -Q ──(Mon,May18)─┘
┌─(simke@philander:pts/0)─────────────────────────────────────────────────(~)─┐
└─(21:34:%)── ──(Mon,May18)─┘
I installd pacman-cage and ih faild tu, what eve hi nead to do, end I now nead install all dependencies agein.
┌─(simke@philander:pts/0)─────────────────────────────────────────────────(~)─┐
└─(21:34:%)── pS openbox ──(Mon,May18)─┘
resolving dependencies...
looking for inter-conflicts...
Targets (46): xcb-proto-1.4-1 xproto-7.0.15-1 kernel-headers-2.6.29.1-1
tzdata-2009g-1 glibc-2.9-7 libxdmcp-1.0.2-2 libxau-1.0.4-1
libxcb-1.2-1 kbproto-1.0.3-2 libx11-1.2.1-1 libice-1.0.5-1
ncurses-5.7-2 readline-5.2.013-2 bash-3.2.048-3
e2fsprogs-1.41.5-2 libsm-1.1.0-1 xcb-util-0.3.4-2
startup-notification-0.10-1 zlib-1.2.3.3-3 libxml2-2.7.3-1
inputproto-1.5.0-1 xextproto-7.0.5-1 libxext-1.0.5-2
xineramaproto-1.1.2-2 libxinerama-1.0.3-2 renderproto-0.9.3-2
libxrender-0.9.4-2 randrproto-1.3.0-1 libxrandr-1.3.0-1
fixesproto-4.0-3 libxfixes-4.0.3-2 libxcursor-1.1.9-2
gcc-libs-4.4.0-1 pcre-7.9-1 glib2-2.20.1-1 libpng-1.2.36-1
freetype2-2.3.9-2 expat-2.0.1-2 fontconfig-2.6.0-2
pixman-0.14.0-2 cairo-1.8.6-1 libxft-2.1.13-1
libdatrie-0.2.2-1 libthai-0.1.11-1 pango-1.24.2-1
openbox-3.4.7.2-2
Total Download Size: 30.50 MB
Total Installed Size: 115.61 MB
Proceed with installation? [Y/n]
and, I think, that I wiil not get an updates.
I have installd pacamn-cage, end hi did not finish, what ever hi nead tu.
pleas help.
sorry for bed eanglish, I am from croatia.
Last edited by simke (2009-05-18 20:20:05)

I find it, it is in
/var/lib/pacman/pacman.bak/pacman.bak/local
but there are folders whit name of all installd pakages.
how can I now retrive my db. can I do that vhit this information. and how.
could I yust c/p those folders tu, where they nead to bee.
Last edited by simke (2009-05-18 20:10:36)

Lost translation ratios in BCS

Hi,
we are using the curency conversion functionality in BCS 4.0. Exchange rates, exchange rates types and indicators as well as translation ratios have been defined in the system. However the system "forgets" the translation ratios in every new period and they have to be entered again. This also happens with past periods.
Thank you for any hints.
Stefan

Hi Stefan,
I may suggest that you use a currency with indirect quotation.
In this is the case, enter translation ratios for BOTH quotations, for example:
YourCurrency to USD as 1:1
and
USD to YourCurrency as 1:1.
Certainly, ratios might be not 1:1 in your case.
Hope it helps,
Eugene

[solved] Lost surround 5.1 with kernel version 3.3.1

Hi! Since i've upgrade to kernel 3.3.1, i lost surround sound, even if pulseaudio says that surround 5.1 is enable.
My modprobe.d dir contains a special file (alsa-base.conf) that contains theses lines:
alias snd-card-0 snd-hda-intel
options snd-hda-intel model=acer-aspire-8930g power_save=0 power_save_controller=N
My laptop is a acer 8940g and it used to work well since kernel 2.6.30.
I use pulseaudio since a long time ago and likes it.
Here's output from aplay -l
aplay -l
**** Liste des Périphériques Matériels PLAYBACK ****
carte 0: Intel [HDA Intel], périphérique 0: ALC889 Analog [ALC889 Analog]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: Intel [HDA Intel], périphérique 1: ALC889 Digital [ALC889 Digital]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 3: HDMI 0 [HDMI 0]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 7: HDMI 0 [HDMI 0]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 8: HDMI 0 [HDMI 0]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 1: NVidia [HDA NVidia], périphérique 9: HDMI 0 [HDMI 0]
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
Does anyone knows about this problem? The only solution i had right now is to revert back to kernel 3.2.14.
Thanks!
Last edited by danym (2012-04-12 02:04:43)

I have an 8930g, so pretty close to you.
My surround sound works. I use alsa-driver 1.0.25, rather than the in-kernel ALSA.
So, my kernel config is:
$ zgrep SOUND /proc/config.gz
CONFIG_SOUND=m
# CONFIG_SOUND_OSS_CORE is not set
# CONFIG_SOUND_PRIME is not set
$ zgrep SND /proc/config.gz
# CONFIG_SND is not set
And alsa-driver is compiled with:
./configure --prefix=/usr --with-isapnp=no --with-sequencer=yes --with-oss=no --with-pcm-oss-plugins=no --with-debug=none --with-kernel=/usr/src/linux --with-cards=hda-intel,hrtimer --with-card-options=seq-hrtimer-default,hda-codec-realtek,hda-hwdep,hda-reconfig,hda-patch-loader,hda-enable-realtek-quirks,hda-codec-analog,hda-prealloc-size=2048

[SOLVED]lost window decorations in xfce4

i'm running arch on an acer aspire one netbook, i tried out compiz to see how it would run, then disabled it because it's too sluggish. in doing so i have lost all window decorations in xfce4. kdemod still has it's decorations and is working fine, it's just xfce that's the problem.
how do i bring back window decorations?
Last edited by hume's doona (2009-12-28 00:50:33)

Did you try deleting the session and restarting xfce?
(If I remember right those were in "~/.cache/sessions/", but better check google )
Last edited by whoops (2009-12-28 00:35:11)

[Solved] Lost files

Hi,
I have just lost some really important files. What happened is the following:
I have a partition in ntfs which I use to share files between arch and windows.
I started working with some files in arch, and then hibernated. Later I continued editing those files in windows. Since occasionally I play some games in windows, there has been some time since I worked in linux.
Now, when I resumed arch, the files are left as the first time in linux. All the changes made in windows are lost. I restarted windows and the files are lost too!
What could I do to recover those files?
thanks for any help!
Last edited by olvar (2011-04-26 14:12:18)

That seems right, but I'm lucky!
I installed "ntfsprogs" from the repos, and run ntfsfix on the partition. The files are recovered now.
I guess that since I hibernate, the new files got orphaned on resuming. The original files seems to be just overwritten and the changes lost, but the new files are ok.
Since before making large changes I use to copy the files, just in case, I didn't lose anything significant.
ty

[SOLVED]Lost my us.map.gz

Well... I lost my /usr/share/kbd/keymaps/i386/qwerty/us.map.gz
I accidently deleted it...
Could someone upload it somewhere and provide a link?
Last edited by Dheart (2008-08-06 07:06:52)

I don't have anywhere to upload the file, but I can link you to the package:
i686: http://mirrors.easynews.com/linux/archl … pkg.tar.gz
x86_64: http://mirrors.easynews.com/linux/archl … pkg.tar.gz

[SOLVED] Lost translations

Similar Messages

Maybe you are looking for