SOLVED: Low 3D performance with Intel X3100 on Arch64?
Hello,
I installed Arch x86-64 on my Acer 7720-6902 laptop, which uses X3100 video (i965 chipset). It works nice, except that I am getting VERY bad 3D performance. glxgears gives only ~400fps and I can barely get 30fps on games like ActionCube.
The other distros I tested here, openSUSE and Mandriva, were 32-bits and 3D worked normally.
Any ideas on how to fix it? This is not a work blocker, just an annoyance, as I don't use this machine for 3D gaming but still would like it working properly.
Thanks!
Last edited by Renan Birck (2009-03-07 23:58:27)
Get xorg-server and xf86-video-intel from testing. For more information consult this topic.
Similar Messages
-
Does anyone else have display issues with Intel X3100 graphics and OS X Lion?
I took the screenshot below to demonstrate one issue I have had with graphics since upgrading to OS X Lion. I use a Late 2007 MacBook with 2.0GHz Core 2 Duo and the Intel X3100 graphics chipset. I have 4GB RAM. Had to reboot to get this to correct itself. The problem is the menubar (obvious) and the desktop image is missing, replaced by the grey.
I have an external monitor connected (second image) and everything displays properly there.
Some other issues I've noticed are using Mission Control sometimes yields unpredictable results, graphically speaking, and the fullscreen apps don't always allow me to see the menubar. These all seem graphically related. Is this a hardware or software problem? Any solutions?Here is another display issue with my machine...perhaps software rather than hardware? The icon for the rtf file "Matt Passages" is missing entirely. There is a faint rectangle present instead. The same file has an icon in the first image posted above. No change to the file since then. And two other RTFs have the icon! Odd things with Lion.
-
[SOLVED] No brightness control with Intel!
Hi, i bought a new motherboard (Asus Z87-K) and a i7 4770k. In the processor box are witten that it have a Intel HD Graphics 4600 GPU.
I have never used a UEFI motherboard before and i passed all the day trying to configure the UEFI boot! ( im using gummiboot)
With the system instaled, i too installed the xf68 intel drivers. But i realized that that i cant control the brightness. So i tryed to do it mannualy editing the /sys/c ass/backlight/* archive. But in this folder don't have the intel folder, just an acpi_video0 folder, and when i edit it anything happen .
In my older notebook with a intel graphis, just edit the archive are the solution, but now it dont help.
I too tried xbacklight, and i receive the message.
# xbacklight +20%
No outputs have backlight property
The strange thing is that my lscpi output show me this:
$ lscpi | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Xeon E3-1200 v3/4th Gen Core Processor Integrated Graphics Controller (rev 06)
I readed something about boot configuration, but im noot using GRUB, and they say to add some paramethers to boot script.
I'm using HDMI!
Right now, anything solved my problem.
Henrique Lengler
Last edited by henriqueleng (2014-02-19 00:11:50)Your old computer was a laptop with integrated display, and your new computer is a desktop with external monitor, right? As far as I know, you cannot control a monitor's backlight through a standard video interface. Laptops can use /sys/class/backlight because they have a direct connection to the backlight hardware. If the monitor's built in controls do not lower the brightness sufficiently, then there is not much else you can do. There may be software methods to lower the overall brightness (I know nvidia can do this), but that is not the same as lowering the backlight and may hurt the image quality.
-
Very slow network performance with Intel NIC when TCP Large Send Offload is enabled
I have a Windows 2008 server with two NIC's (Intel PRO/1000 PL and Intel PRO/1000 PM), and one virtual external switch connected to each NIC.
With the 01/14/08 network driver, I get very low throughput on both NIC's (~10KB/sec when downloading from my server when it should be around 11MB/sec).
I've found that disabling "TCP Large Send Offload (IPv4)" on the virtual switch and "Large Send Offload v2 (IPv4)" on the physical adapters solves the problem.
Is this a bug in the driver?
Thank you,
Ricardo Costa2 years later, I was able to get that machine to work with Hyper-V under Windows Server 2008 R2, but only after disabling everything that had anything to do with TCP or IP offloading. I think that I had to turn off 4 settings on one controller,
and 5 settings on the other controller. Once that was done, everything worked flawlessly. It is very apparent that the Virtual Controllers do not properly use many of the features of non-Intel devices (not all Intel devices work either), and
that Hyper-V does not completely uninstall if you remove it.
If you have any problems, start turning off the features that your adapter supports, until it starts working. You'll need to weight the cost of replacing the controller with a fully supported controller, of which there is no list, or using your existing
controller at a capacity lower than it physically supports. This has been an elusive issue with Microsoft's Virtual Server projects since they were first in beta, so don't expect a fix anytime soon.
P.S. For those who don't know, the settings are on the actual device and can be changed in the Device Manager. If you are still having trouble after turning off all the settings, then you will need to replace the controller(s) with a different
make/model.
Bill Bosacker's Blog @ http://www.openSourceC.org/ -
Intel GM45 (x4500M) terrible 3d performance with intel driver and mesa
I have following problem with my Lenovo SL500 laptop. I have installed new xorg-server 1.5, mesa 7.2, libgl 7.2 and intel driver 2.4 with libdrm 2.3.1 and intel-dri 7.2 (from testing repository) and generated xorg config. Everything went fine, and Xorg.log does not report any errors. When using 2d graphics everything is smooth and fast. Problem starts when I run glxgears. Performance is terrible, I get only about 60 fps. In addition I got the following error:
[tomek@notebook ~]$ glxgears
Failed to initialize TTM buffer manager. Falling back to classic.
292 frames in 5.0 seconds = 58.241 FPS
301 frames in 5.0 seconds = 60.001 FPS
Here is my glxinfo output
name of display: :0.0
Failed to initialize TTM buffer manager. Falling back to classic.
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_ARB_multisample, GLX_EXT_import_context, GLX_EXT_texture_from_pixmap,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_copy_sub_buffer,
GLX_OML_swap_method, GLX_SGI_swap_control, GLX_SGIS_multisample,
GLX_SGIX_fbconfig, GLX_SGIX_visual_select_group
client glx vendor string: SGI
client glx version string: 1.4
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_copy_sub_buffer, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_OML_sync_control,
GLX_SGI_make_current_read, GLX_SGI_swap_control, GLX_SGI_video_sync,
GLX_SGIS_multisample, GLX_SGIX_fbconfig, GLX_SGIX_pbuffer,
GLX_SGIX_visual_select_group, GLX_EXT_texture_from_pixmap
GLX version: 1.2
GLX extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_swap_control,
GLX_MESA_swap_frame_usage, GLX_OML_swap_method, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_visual_select_group
OpenGL vendor string: Tungsten Graphics, Inc
OpenGL renderer string: Mesa DRI Mobile Intel® GM45 Express Chipset 20061102 x86/MMX/SSE2
OpenGL version string: 1.4 Mesa 7.2
OpenGL extensions:
GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_fragment_program,
GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
GL_ARB_multisample, GL_ARB_multitexture, GL_ARB_point_parameters,
GL_ARB_point_sprite, GL_ARB_shader_objects, GL_ARB_shading_language_100,
GL_ARB_shading_language_120, GL_ARB_shadow, GL_ARB_texture_border_clamp,
GL_ARB_texture_compression, GL_ARB_texture_cube_map,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_crossbar, GL_ARB_texture_env_dot3,
GL_ARB_texture_mirrored_repeat, GL_ARB_texture_non_power_of_two,
GL_ARB_texture_rectangle, GL_ARB_transpose_matrix,
GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra, GL_EXT_blend_color,
GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
GL_EXT_blend_logic_op, GL_EXT_blend_minmax, GL_EXT_blend_subtract,
GL_EXT_clip_volume_hint, GL_EXT_cull_vertex, GL_EXT_compiled_vertex_array,
GL_EXT_copy_texture, GL_EXT_draw_range_elements, GL_EXT_fog_coord,
GL_EXT_multi_draw_arrays, GL_EXT_packed_depth_stencil,
GL_EXT_packed_pixels, GL_EXT_point_parameters, GL_EXT_polygon_offset,
GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_shadow_funcs, GL_EXT_stencil_wrap,
GL_EXT_subtexture, GL_EXT_texture, GL_EXT_texture3D,
GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_lod_bias,
GL_EXT_texture_object, GL_EXT_texture_rectangle, GL_EXT_texture_sRGB,
GL_EXT_vertex_array, GL_3DFX_texture_compression_FXT1,
GL_APPLE_client_storage, GL_APPLE_packed_pixels,
GL_ATI_blend_equation_separate, GL_ATI_separate_stencil,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_INGR_blend_func_separate, GL_MESA_pack_invert, GL_MESA_ycbcr_texture,
GL_MESA_window_pos, GL_NV_blend_square, GL_NV_light_max_exponent,
GL_NV_point_sprite, GL_NV_texture_rectangle, GL_NV_texgen_reflection,
GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_OES_read_format,
GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
GL_SUN_multi_draw_arrays
3 GLX Visuals
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x21 24 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x22 24 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x5f 32 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
36 GLXFBConfigs:
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
0x60 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x61 0 tc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x62 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x63 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x64 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x65 0 tc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x66 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x67 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x68 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x69 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6a 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6b 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6c 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6d 0 tc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x6e 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x6f 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x70 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x71 0 tc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x72 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x73 0 dc 0 32 0 r . . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x74 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x75 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x76 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 0 0 0 0 0 0 None
0x77 0 dc 0 32 0 r y . 8 8 8 8 0 0 0 16 16 16 16 0 0 Slow
0x78 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x79 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x7a 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x7b 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x7c 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x7d 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x7e 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x7f 0 dc 0 32 0 r . . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x80 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x81 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
0x82 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 0 0 0 0 0 0 None
0x83 0 dc 0 32 0 r y . 8 8 8 8 0 24 8 16 16 16 16 0 0 Slow
I'm puzzled because at www.phoronix.com they eneded up with good results with my video card (that is of course Intel x4500 as in topic )
I would be grateful if someone gave me a tip how to improve performance of my graphics card.
Here is my xorg.conf
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dri"
Load "extmod"
Load "glx"
Load "xtrap"
Load "dbe"
Load "freetype"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "LEN"
Option "PreferredMode" "1280x800"
ModelName "4050"
Option "DPMS"
UseModes "Modes[0]"
EndSection
Section "Modes"
Identifier "Modes[0]"
Modeline "1280x800" 83.46 1280 1344 1480 1680 800 801 804 828
Modeline "1280x800" 69.75 1280 1328 1360 1440 800 803 809 823 +HSync -Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
and Xorg.0.log
X.Org X Server 1.5.3
Release Date: 5 November 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.27-ARCH i686
Current Operating System: Linux notebook 2.6.27-ARCH #1 SMP PREEMPT Fri Nov 14 09:33:13 UTC 2008 i686
Build Date: 09 November 2008 07:16:27PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 27 07:54:05 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(==) Automatically adding devices
(==) Automatically enabling devices
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) AllowEmptyInput is on, devices using drivers 'kbd' or 'mouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Open ACPI successful (/var/run/acpid.socket)
(II) Loader magic: 0x81d66e0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 4.1
X.Org XInput driver : 2.1
X.Org Server Extension : 1.1
X.Org Font Renderer : 0.6
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfdc00000/0, 0xd0000000/0, I/O @ 0x00005c00/0
(--) PCI: (0@0:2:1) Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xfdb00000/0
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Server Extension, version 1.1
(==) AIGLX enabled
(==) Exporting typical set of GLX visuals
(II) Loading extension GLX
(II) LoadModule: "xtrap"
(II) Loading /usr/lib/xorg/modules/extensions//libxtrap.so
(II) Module xtrap: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DEC-XTRAP
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 1.1
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.5.3, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.6
(II) Loading font FreeType
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.3
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 4.1
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33,
Mobile Intel® GM45 Express Chipset,
Intel Integrated Graphics Device, G45/G43, Q45/Q43
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.1.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.1.0
ABI class: X.Org Video Driver, version 4.1
(==) intel(0): Depth 24, (==) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(II) intel(0): Integrated Graphics Chipset: Intel(R) Mobile Intel® GM45 Express Chipset
(--) intel(0): Chipset: "Mobile Intel® GM45 Express Chipset"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xFDC00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(WW) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 32704 kB
(II) intel(0): VESA VBE OEM: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r)Cantiga Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(**) intel(0): Option "PreferredMode" "1280x800"
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video1
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): Output HDMI-1 has no monitor section
(II) intel(0): I2C bus "HDMIDDC_B" initialized.
(II) intel(0): HDMI output 1 detected
(II) intel(0): Output TV has no monitor section
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Output VGA connected
(II) intel(0): Output LVDS connected
(II) intel(0): Output HDMI-1 disconnected
(II) intel(0): Output TV connected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output VGA using initial mode 1280x800
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Output TV using initial mode 1024x768
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 512 kB GTT.
(II) intel(0): detected 32764 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 2.4.0
ABI class: X.Org Video Driver, version 4.1
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x61110 (PORT_HOTPLUG_EN) changed from 0x00000020 to 0x38000020
(WW) intel(0): Register 0x61114 (PORT_HOTPLUG_STAT) changed from 0x00000000 to 0x18000f00
(WW) intel(0): Register 0x68000 (TV_CTL) changed from 0x00000010 to 0x000c0010
(WW) intel(0): Register 0x68010 (TV_CSC_Y) changed from 0x00000000 to 0x0332012d
(WW) intel(0): Register 0x68014 (TV_CSC_Y2) changed from 0x00000000 to 0x07d30104
(WW) intel(0): Register 0x68018 (TV_CSC_U) changed from 0x00000000 to 0x0733052d
(WW) intel(0): Register 0x6801c (TV_CSC_U2) changed from 0x00000000 to 0x05c70200
(WW) intel(0): Register 0x68020 (TV_CSC_V) changed from 0x00000000 to 0x0340030c
(WW) intel(0): Register 0x68024 (TV_CSC_V2) changed from 0x00000000 to 0x06d00200
(WW) intel(0): Register 0x68028 (TV_CLR_KNOBS) changed from 0x00000000 to 0x00606000
(WW) intel(0): Register 0x6802c (TV_CLR_LEVEL) changed from 0x00000000 to 0x010b00e1
(WW) intel(0): Register 0x68030 (TV_H_CTL_1) changed from 0x00000000 to 0x00400359
(WW) intel(0): Register 0x68034 (TV_H_CTL_2) changed from 0x00000000 to 0x80480022
(WW) intel(0): Register 0x68038 (TV_H_CTL_3) changed from 0x00000000 to 0x007c0344
(WW) intel(0): Register 0x6803c (TV_V_CTL_1) changed from 0x00000000 to 0x00f01415
(WW) intel(0): Register 0x68040 (TV_V_CTL_2) changed from 0x00000000 to 0x00060607
(WW) intel(0): Register 0x68044 (TV_V_CTL_3) changed from 0x00000000 to 0x80120001
(WW) intel(0): Register 0x68048 (TV_V_CTL_4) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x6804c (TV_V_CTL_5) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68050 (TV_V_CTL_6) changed from 0x00000000 to 0x000900f0
(WW) intel(0): Register 0x68054 (TV_V_CTL_7) changed from 0x00000000 to 0x000a00f0
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0x00000000 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x00000000 to 0x4e2d1dc8
(WW) intel(0): Register 0x68070 (TV_WIN_POS) changed from 0x00000000 to 0x00360024
(WW) intel(0): Register 0x68074 (TV_WIN_SIZE) changed from 0x00000000 to 0x02640198
(WW) intel(0): Register 0x68080 (TV_FILTER_CTL_1) changed from 0x00000000 to 0x8000085e
(WW) intel(0): Register 0x68084 (TV_FILTER_CTL_2) changed from 0x00000000 to 0x00028283
(WW) intel(0): Register 0x68088 (TV_FILTER_CTL_3) changed from 0x00000000 to 0x00014141
(WW) intel(0): Register 0x68100 (TV_H_LUMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x681ec (TV_H_LUMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x68200 (TV_H_CHROMA_0) changed from 0x00000000 to 0xb1403000
(WW) intel(0): Register 0x682ec (TV_H_CHROMA_59) changed from 0x00000000 to 0x0000b060
(WW) intel(0): Register 0x321b (FBC_FENCE_OFF) changed from 0x3503df00 to 0xce009400
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 482816 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 1931260 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xfdc00000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0xd0100000
(II) intel(0): [drm] mapped back buffer at 0xd2000000, handle = 0xd2000000
(II) intel(0): [drm] mapped depth buffer at 0xd274e000, handle = 0xd274e000
(II) intel(0): [drm] mapped classic textures at 0xd2e9c000, handle = 0xd2e9c000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 22978560 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x000000007e020000 physical
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000001
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(**) Option "dpms"
(**) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: Enabled
(WW) intel(0): Option "PreferredMode" is not used
(--) RandR disabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device USB Optical Mouse
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.5.2, module version = 2.0.7
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(**) USB Optical Mouse: always reports core events
(**) USB Optical Mouse: Device: "/dev/input/event9"
(II) USB Optical Mouse: Found x and y relative axes
(II) USB Optical Mouse: Found mouse buttons
(II) USB Optical Mouse: Configuring as mouse
(II) XINPUT: Adding extended input device "USB Optical Mouse" (type: MOUSE)
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input//synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.5.3, module version = 0.99.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.1
(II) Synaptics touchpad driver version 0.99.1
(**) Option "Device" "/dev/input/event8"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle double triple
(--) SynPS/2 Synaptics TouchPad touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event6"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event5"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) Video Bus: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) Video Bus: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) Video Bus: xkb_layout: "us"
(II) config/hal: Adding input device TPPS/2 IBM TrackPoint
(**) TPPS/2 IBM TrackPoint: always reports core events
(**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
(II) TPPS/2 IBM TrackPoint: Found x and y relative axes
(II) TPPS/2 IBM TrackPoint: Found mouse buttons
(II) TPPS/2 IBM TrackPoint: Configuring as mouse
(II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "base"
(**) AT Translated Set 2 keyboard: xkb_rules: "base"
(**) Option "xkb_model" "evdev"
(**) AT Translated Set 2 keyboard: xkb_model: "evdev"
(**) Option "xkb_layout" "us"
(**) AT Translated Set 2 keyboard: xkb_layout: "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Found mouse buttons
(II) Macintosh mouse button emulation: Configuring as mouse
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
AUDIT: Thu Nov 27 07:54:13 2008: 7105 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=7122 )
AUDIT: Thu Nov 27 07:54:13 2008: 7105 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=7123 )
AUDIT: Thu Nov 27 07:54:13 2008: 7105 Xorg: client 5 rejected from local host ( uid=1000 gid=1000 pid=7124 )
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): I2C device "CRTDDC_A:ddc2" registered at address 0xA0.
(II) intel(0): I2C device "CRTDDC_A:ddc2" removed.
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 70.50 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (49.3 kHz)
(II) intel(0): Modeline "1280x800"x0.0 58.63 1280 1312 1344 1430 800 805 809 820 -hsync -vsync (41.0 kHz)
(II) intel(0): EDID vendor "LEN", prod id 16464
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) config/hal: removing device USB Optical Mouse
(II) USB Optical Mouse: Close
(II) UnloadModule: "evdev"
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x000000007e020000 physical
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] mapped front buffer at 0xd0100000, handle = 0x2a020000
(II) intel(0): [drm] dma control initialized, using IRQ 16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x000000007e020000 physical
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
(II) AIGLX: Suspending AIGLX clients for VT switch
(II) intel(0): xf86UnbindGARTMemory: unbind key 0
(II) intel(0): xf86UnbindGARTMemory: unbind key 1
(II) intel(0): xf86UnbindGARTMemory: unbind key 2
(II) intel(0): xf86UnbindGARTMemory: unbind key 3
(II) Open ACPI successful (/var/run/acpid.socket)
(II) AIGLX: Resuming AIGLX clients after VT switch
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01fff000 (pgoffset 8191)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x0274e000 (pgoffset 10062)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x02e9c000 (pgoffset 11932)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x00094fff: compressed frame buffer (468 kB, 0x000000007e020000 physical
(II) intel(0): 0x00095000-0x0009efff: HW cursors (40 kB)
(II) intel(0): 0x0009f000-0x000a6fff: logical 3D context (32 kB)
(II) intel(0): 0x000a7000-0x000b8fff: exa G965 state buffer (72 kB)
(II) intel(0): 0x000b9000-0x000b9fff: power context (4 kB)
(II) intel(0): 0x00100000-0x0084dfff: front buffer (7480 kB) X tiled
(II) intel(0): 0x0084e000-0x01e37fff: exa offscreen (22440 kB)
(II) intel(0): 0x01fff000: end of stolen memory
(II) intel(0): 0x01fff000-0x01ffffff: HW status (4 kB)
(II) intel(0): 0x02000000-0x0274dfff: back buffer (7480 kB) X tiled
(II) intel(0): 0x0274e000-0x02e9bfff: depth buffer (7480 kB) Y tiled
(II) intel(0): 0x02e9c000-0x04e9bfff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(II) intel(0): using SSC reference clock of 100 MHz
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is on
(II) intel(0): Display plane A is now enabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe A
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output HDMI-1 is connected to pipe none
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(--) SynPS/2 Synaptics TouchPad touchpad found
(II) Video Bus: Device reopened after 1 attempts.
(II) Video Bus: Device reopened after 1 attempts.
(II) TPPS/2 IBM TrackPoint: Device reopened after 1 attempts.
(II) AT Translated Set 2 keyboard: Device reopened after 1 attempts.
(II) Macintosh mouse button emulation: Device reopened after 1 attempts.
Last edited by tomekz (2008-11-27 11:24:47)Apparently yes,
According to the thread:
To restore to the old behaviour, put this in your ~/.drirc:
<driconf>
<device screen="0" driver="i915">
<application name="Default">
<option name="vblank_mode" value="0" />
</application>
</device>
</driconf>
But I don't come back to the same perfs as before (tested with eternal lands).
I noticed that in my /var/log/Xorg.0.log:
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd0000009
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00020202 to 0x00020000
(WW) intel(0): PIPEBSTAT before: status: VBLANK_INT_ENABLE VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: VBLANK_INT_ENABLE
There seem to be some problem with mtrr
I found this problem which seems related but I only have 2GB of memory
Last edited by sebcactus (2008-11-30 21:20:22) -
T520 - 42435gg / Sound stutter and slow Graphic performance with Intel Rapid Storage AHCI Driver
Hi everybody,
I have serious Problems with my 42435gg
Any time I install the Intel Storage AHCI Driver (I've tried plenty of different versions) which is suggested by System Update I experience a horrible Sound stutter and slow Graphic performance in Windows 7 64-Bit.
The funny thing in this case: If the external e-sata port is connected the problems do not occur. If the port is unused again, the stutter begins immediately.
The only thing I can do is using the Windows internal Storage Driver with which I am not able to use my DVD recorder for example.
The device was sent to lenovo for hardware testing with no result. It was sent back without any repairing.
Anybody experience on this?
Kind regards,
DanielDid you try the 11.5 RST beta? Load up DPClat and see if DPC conditions are favorable.
What are you using to check graphics performance?
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen -
[SOLVED] GL Apps Segfault with intel Driver
New arch linux user here, recent convert from gentoo Loving it so far, spectacular operating system. Not building everything from source is a beautiful thing
However, it seems that GL doesn't like me... After I had Xorg in a state where everything seemed to be working, I decided to give glxgears a run, and boom: "Segmentation Fault." So, I tried to install a game which used GL, picked torcs, tried running it... "Segmentation fault."
After playing with all manner of xorg.conf options, reading the log file and googling like mad, I'm completely lost. Everything looks fine, up until the segfault.
Here's the xorg.conf, (with a good bunch of options i tossed in to try to fix it...) :
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "dbe"
Load "dri"
Load "dri2"
Load "extmod"
Load "glx"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "NoDDC" "True"
Option "DRI" "True"
Option "AccelMethod" "UXA"
Option "RenderAccel" "True"
Option "EnablePageFlip" "True"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Modes "1366x768"
Depth 24
EndSubSection
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
Section "DRI"
Group 0
Mode 0666
EndSection
...and the logfile:
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
X.Org X Server 1.7.1.902 (1.7.2 RC 2)
Release Date: 2009-11-20
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.31-ARCH x86_64
Current Operating System: Linux alice 2.6.31-ARCH #1 SMP PREEMPT Tue Nov 10 19:01:40 CET 2009 x86_64
Kernel command line: BOOT_IMAGE=arch ro root=/dev/sda4 i915.modeset=1
Build Date: 21 November 2009 05:05:05PM
Current version of pixman: 0.16.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Nov 26 20:30:25 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "AIGLX" "True"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
(WW) Disabling Mouse0
(WW) Disabling Keyboard0
(II) Loader magic: 0x7c1ca0
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 6.0
X.Org XInput driver : 7.0
X.Org Server Extension : 2.0
(++) using VT number 7
(--) PCI:*(0:0:2:0) 8086:2a42:107b:0704 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
(--) PCI: (0:0:2:1) 8086:2a43:107b:0704 Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller rev 7, Mem @ 0xf0400000/1048576
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded by default.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.7.1.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions/libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.7.1.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.7.1.902, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.7.1.902, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions/libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.7.1.902, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(**) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions/librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.7.1.902, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.7.1, module version = 2.9.1
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 6.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, Clarkdale, Arrandale
(II) Primary Device is: PCI 00@00:02:0
(WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "True"
(II) intel(0): Integrated Graphics Chipset: Intel(R) GM45
(--) intel(0): Chipset: "GM45"
(II) intel(0): Output VGA1 using monitor section Monitor0
(II) intel(0): Output LVDS1 has no monitor section
(II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
(II) intel(0): Output DVI1 has no monitor section
(II) intel(0): Output DP1 has no monitor section
(II) intel(0): Output DP2 has no monitor section
(II) intel(0): Output VGA1 disconnected
(II) intel(0): Output LVDS1 connected
(II) intel(0): Output DVI1 disconnected
(II) intel(0): Output DP1 disconnected
(II) intel(0): Output DP2 disconnected
(II) intel(0): Using user preference for initial modes
(II) intel(0): Output LVDS1 using initial mode 1366x768
(II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
(==) intel(0): video overlay key set to 0x101fe
(**) intel(0): Display dimensions: (433, 243) mm
(**) intel(0): DPI set to (80, 80)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules/libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.7.1.902, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "dri2"
(II) LoadModule: "dri2"
(II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
(==) Depth 24 pixmap format is 32 bpp
(II) intel(0): [DRI2] Setup complete
(**) intel(0): Kernel mode setting active, disabling FBC.
(**) intel(0): Framebuffer compression disabled
(**) intel(0): Tiling enabled
(**) intel(0): SwapBuffers wait enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) UXA(0): Driver registered support for the following operations:
(II) solid
(II) copy
(II) composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): No memory allocations
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(**) intel(0): DPMS enabled
(==) intel(0): Intel XvMC decoder disabled
(II) intel(0): Set up textured video
(II) intel(0): direct rendering: DRI2 Enabled
(WW) intel(0): Option "NoDDC" is not used
(WW) intel(0): Option "AccelMethod" is not used
(WW) intel(0): Option "XAANoOffscreenPixmaps" is not used
(WW) intel(0): Option "RenderAccel" is not used
(WW) intel(0): Option "EnablePageFlip" is not used
(WW) intel(0): Option "DPI" is not used
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
record: RECORD extension enabled at configure time.
record: This extension is known to be broken, disabling extension now..
record: http://bugs.freedesktop.org/show_bug.cgi?id=20500
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i965_dri.so
(II) GLX: Initialized DRI2 GL provider for screen 0
(II) intel(0): Setting screen physical size to 361 x 203
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.7.1.901, module version = 2.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found relative axes
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) acceleration profile 0
(II) Macintosh mouse button emulation: initialized for relative axes.
(II) config/hal: Adding input device SynPS/2 Synaptics TouchPad
(II) LoadModule: "synaptics"
(II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
(II) Module synaptics: vendor="X.Org Foundation"
compiled for 1.7.0.901, module version = 1.2.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 7.0
(II) Synaptics touchpad driver version 1.2.0
(**) Option "Device" "/dev/input/event5"
(II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
(II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
(II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
(II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
(II) SynPS/2 Synaptics TouchPad: buttons: left right middle
(**) Option "TapButton1" "1"
(**) Option "TapButton2" "2"
(**) Option "TapButton3" "3"
(--) SynPS/2 Synaptics TouchPad: touchpad found
(**) SynPS/2 Synaptics TouchPad: always reports core events
(II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
(**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
(**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
(--) SynPS/2 Synaptics TouchPad: touchpad found
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device CNF7129
(**) CNF7129: always reports core events
(**) CNF7129: Device: "/dev/input/event9"
(II) CNF7129: Found keys
(II) CNF7129: Configuring as keyboard
(II) XINPUT: Adding extended input device "CNF7129" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Sleep Button
(**) Sleep Button: always reports core events
(**) Sleep Button: Device: "/dev/input/event8"
(II) Sleep Button: Found keys
(II) Sleep Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event7"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event2"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event3"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(**) Option "xkb_options" "terminate:ctrl_alt_bksp"
(II) intel(0): EDID vendor "AUO", prod id 4332
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1366x768"x0.0 72.00 1366 1414 1446 1486 768 771 775 806 -hsync -vsync (48.5 kHz)
I am using kernel modesetting, which could perhaps be related... The thing is, everything else seems to work perfectly fine, which leads me to believe it's some obscure config issue i've just completely missed somewhere along the line.
Any ideas? any help would be highly appreciated
Last edited by decibelmute (2009-11-28 01:23:03)Haha, worked like a charm
Many thanks -
[SOLVED] Xorg 1.6 with intel graphic corruption
Hi Arch community
frequently the part of graphic corruption in any application, see screenshot:
this fix (depend) when refresh section, or move mouse over this.
I have:
Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller
xorg 1.6 with xf86-video-intel-legacy
my xorg.conf:
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
Option "DRI" "True"
Option "NoDDC" "True"
Option "XAANoOffscreenPixmaps" "True"
Option "XaaNoPixmapCache"
Option "EnablePageFlip" "True"
Option "RenderAccel" "True"
#Option "AccelMethod" "xaa"
Option "Tiling" "false"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "MIT-SHM" "Yes"
EndSection
please help, this problem is annoying
thanks {
Last edited by epsilom (2009-04-24 00:41:36)andywxy wrote:
@epsilom
could you share your xorg.conf? I have the same problem with the compiz fusion as my WM, however, I didn't use xorg.conf.
Thank you!
first generate xorg.conf (see http://wiki.archlinux.org/index.php/Xorg ) and modify/add:
Section "Device"
Identifier "Card0"
Driver "intel"
VendorName "All"
BoardName "All"
Option "DRI" "True"
Option "RenderAccel" "True"
Option "ExaOptimizeMigration" "off"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
EndSection
I don't make public all my xorg.conf because is for my particular hadware
Last edited by epsilom (2009-04-24 14:34:29) -
Choppy video performance with Intel X4500HD
Hey I am getting choppy video play back with my Intel X4500HD. I can watch small youtube videos fine, but if I fullscreen a movies I get pretty bad preformace. The X4500HD is supposed to be able to play HD Movies so I know my system is quite capable.
The drivers I am using,
extra/intel-dri 7.2-2
extra/xf86-video-intel 2.4.3-1
My xorg.conf (I have hotplugging enabled)
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dbe"
Load "xtrap"
Load "extmod"
Load "dri"
Load "freetype"
Load "synaptics"
EndSection
Section "Monitor"
#DisplaySize 330 210 # mm
Identifier "Monitor0"
VendorName "LEN"
ModelName "4053"
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "ColorKey" # <i>
#Option "CacheLines" # <i>
#Option "Dac6Bit" # [<bool>]
#Option "DRI" # [<bool>]
#Option "NoDDC" # [<bool>]
#Option "ShowCache" # [<bool>]
#Option "XvMCSurfaces" # <i>
#Option "PageFlip" # [<bool>]
Option "AccelMethod" "exa"
Option "MigrationHeuristic" "greedy"
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 4 Series Chipset Integrated Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
The only thing that I can think of is that my video chipset is kind of new, and that it has poor support with my current video drivers.http://bbs.archlinux.org/viewtopic.php?id=61650
-
[SOLVED] Install Galago ultrapro with intel 7260 (rev 73)
Hi,
Has anyon had any luck getting this wireless to work. It connects to my access point, and then times out on pacstrap. This freezes my access point. No problems with other wireless devices.
Thanks
Last edited by forshark (2014-03-25 23:00:46)See this thread: https://bbs.archlinux.org/viewtopic.php?id=177651. Basically, get new firmware (link in that thread), the current firmware is very buggy.
Edit: The linux-firmware package in Arch was updated today, it contains the new firmware, so when you install Arch you'll have it already. But the install media still has the old buggy version. Next month's install media will work fine out-of-the-box.
Last edited by Gusar (2014-03-25 18:33:20) -
Cursor skipping under load with Intel KMS
This is driving me nuts...
Performance with Intel drivers and KMS is usually decent. However, under certain loads - most notably, starting Wine - the cursor skips and freezes nonstop. This wasn't an issue when I was able to disable KMS, but now that KMS is required... Well, there it is. Is there any way to work around this?Well, downgrading the driver could do.
BTW, I can't even boot up normally with 2.10 driver and KMS - it simply throws out a blank screen. Downgrade to 2.9 solved the problem. -
How to improve Intel X3100 performance on Satellite L300
Hello everyone.
First of all, I dont know whether it is a suitable place to post this thread here or not but I would like to share with you the experience on improving Intel X3100 (GMA965).
As we know, there is still no good driver from Intel for this chipset at the moment, especially on VIsta.
This improvement is done by editing the Registry of Intel's driver.
*Steps:*
*1* Open Run (Windows+R)
*2* Enter Regedit
*3* Open the subfolder: *HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Video\*
*4* From here you will see lots of subfolders in Video, Open each of them until you see folder *0000* with +_3DMark03.exe+
(For example, my is {HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contr ol\Video\{B5990899-FBCB-45E1-B0B0****} and reg DWord _3Dmark03.exe is found in both subfolders *0000* and *0001*
*5* In *0000* and *0001*, create two new *DWORD* format : *_software.exe* and *~software.exe*, value=1 (hex). Here, *software* stands for the name of the program you want to speed up like *_photoshop.exe* and *~photoshop.exe*
*6* In these folders, look for *GFX_Options* and change its value to *1*
*7* Restart your computer to enable GFX
*8* Repeat step 4 to add more software that you want
Futher updates for the drivers are under developed. However, this method will help you speed up your computer performance with +heavy+ required graphical software. I got doubled FPS on some software on my Toshiba L300 by using this method such as Corel, WarcraftIII and Titan Quest (24-32fps measuring by Fraps)
Hope this is useful for everyone.
Best wishesSorry about this inconvenient. On the post above, Step 4 and Step 5 are not clear due to the html code. Here is the correct way to make it worked
*Step 5:* In 0000 and 0001, create two new DWORD format : *_software.exe* and *~software.exe*, *value=1 (hex)*. Here, software stands for the name of the program you want to speed up like _photoshop.exe and ~photoshop.exe -
[SOLVED]Asus UX32VD, problems with ACPI and Intel video driver
1. The bigger problem seems to be Intel video driver:
When xf86-video-intel is installed, screen stays black after booting. By adding "nomodeset" to grub doesn't help. If I don't start gdm while booting, I can boot to command line with "nomodeset". From command line I tried "startx", but X doesn't start, probably because "nomodeset" has disabled KMS and I've understood that Intel driver needs KMS for GNOME.
When xf86-video-vesa is installed instead of intel driver, screen is still black. By adding "nomodeset" to grub, I can see only mouse at gdm. If rebooting computer without gdm, I can start gnome from command line with startx and it works nice.
In both setups I can connect to laptop with ssh when screen is black. With ssh I checked screen brightness, but it was maximum.
Intel driver version: xf86-video-intel 2.20.1-3
2. The problem with ACPI is found from dmesg, I don't think this effects to graphics problem, because with vesa driver and "acpi=off" set to grub I can start Gnome with startx. I don't even know if it effects at all on my system, dmesg shows error which effects to displayport( intel_dp_i2c_aux_ch error) these maybe related to each others:
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120320/psparse-536)
[ 2.738789] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
[ 2.741836] [drm:intel_dp_i2c_aux_ch] *ERROR* too many retries, giving up
There is log files while booting with Intel driver and gdm set to start at boot in rc.conf, the screen is black, but got logs with ssh:
dmesg:
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.4.6-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.1 (GCC) ) #1 SMP PREEMPT Fri Jul 20 08:21:26 CEST 2012
[ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
[ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000c97be000 (usable)
[ 0.000000] BIOS-e820: 00000000c97be000 - 00000000c9dbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000c9dbf000 - 00000000c9dc2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9dc2000 - 00000000c9dd7000 (usable)
[ 0.000000] BIOS-e820: 00000000c9dd7000 - 00000000c9ddd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ddd000 - 00000000c9ddf000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ddf000 - 00000000c9de4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9de4000 - 00000000c9f3d000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f3d000 - 00000000c9f41000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f41000 - 00000000c9f8b000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f8b000 - 00000000c9f92000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9f92000 - 00000000c9f94000 (usable)
[ 0.000000] BIOS-e820: 00000000c9f94000 - 00000000c9fb2000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb2000 - 00000000c9fb5000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fb5000 - 00000000c9fb7000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fb7000 - 00000000c9fce000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fce000 - 00000000c9fd4000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fd4000 - 00000000c9fdc000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fdc000 - 00000000c9fdd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fdd000 - 00000000c9fec000 (usable)
[ 0.000000] BIOS-e820: 00000000c9fec000 - 00000000c9fed000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9fed000 - 00000000c9ff8000 (usable)
[ 0.000000] BIOS-e820: 00000000c9ff8000 - 00000000c9ffd000 (reserved)
[ 0.000000] BIOS-e820: 00000000c9ffd000 - 00000000ca01c000 (usable)
[ 0.000000] BIOS-e820: 00000000ca01c000 - 00000000ca01e000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca01e000 - 00000000ca032000 (usable)
[ 0.000000] BIOS-e820: 00000000ca032000 - 00000000ca033000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca033000 - 00000000ca045000 (usable)
[ 0.000000] BIOS-e820: 00000000ca045000 - 00000000ca06b000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca06b000 - 00000000ca07f000 (usable)
[ 0.000000] BIOS-e820: 00000000ca07f000 - 00000000ca080000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca080000 - 00000000ca081000 (usable)
[ 0.000000] BIOS-e820: 00000000ca081000 - 00000000ca083000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca083000 - 00000000ca084000 (usable)
[ 0.000000] BIOS-e820: 00000000ca084000 - 00000000ca089000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca089000 - 00000000ca0a1000 (usable)
[ 0.000000] BIOS-e820: 00000000ca0a1000 - 00000000ca645000 (reserved)
[ 0.000000] BIOS-e820: 00000000ca645000 - 00000000ca8c5000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca8c5000 - 00000000ca8ca000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000ca8ca000 - 00000000ca8cb000 (usable)
[ 0.000000] BIOS-e820: 00000000ca8cb000 - 00000000ca90e000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000ca90e000 - 00000000cad1d000 (usable)
[ 0.000000] BIOS-e820: 00000000cad1d000 - 00000000caff4000 (reserved)
[ 0.000000] BIOS-e820: 00000000caff4000 - 00000000cb000000 (usable)
[ 0.000000] BIOS-e820: 00000000cbc00000 - 00000000cfe00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff000000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000012f200000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI=0xca894000 ACPI 2.0=0xca894000 SMBIOS=0xf04c0 MPS=0xfd4c0
[ 0.000000] efi: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
[ 0.000000] efi: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000005e000) (0MB)
[ 0.000000] efi: mem02: type=4, attr=0xf, range=[0x000000000005e000-0x0000000000060000) (0MB)
[ 0.000000] efi: mem03: type=3, attr=0xf, range=[0x0000000000060000-0x000000000009f000) (0MB)
[ 0.000000] efi: mem04: type=6, attr=0x800000000000000f, range=[0x000000000009f000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem05: type=2, attr=0xf, range=[0x0000000000100000-0x0000000000fc2000) (14MB)
[ 0.000000] efi: mem06: type=7, attr=0xf, range=[0x0000000000fc2000-0x0000000001000000) (0MB)
[ 0.000000] efi: mem07: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
[ 0.000000] efi: mem08: type=7, attr=0xf, range=[0x0000000001100000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem09: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002ec2000) (14MB)
[ 0.000000] efi: mem10: type=7, attr=0xf, range=[0x0000000002ec2000-0x0000000020000000) (465MB)
[ 0.000000] efi: mem11: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB)
[ 0.000000] efi: mem12: type=7, attr=0xf, range=[0x0000000020200000-0x0000000037a46000) (376MB)
[ 0.000000] efi: mem13: type=2, attr=0xf, range=[0x0000000037a46000-0x0000000037d1b000) (2MB)
[ 0.000000] efi: mem14: type=7, attr=0xf, range=[0x0000000037d1b000-0x0000000040004000) (130MB)
[ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x0000000040004000-0x0000000040005000) (0MB)
[ 0.000000] efi: mem16: type=7, attr=0xf, range=[0x0000000040005000-0x000000008ea0f000) (1258MB)
[ 0.000000] efi: mem17: type=2, attr=0xf, range=[0x000000008ea0f000-0x00000000be4b2000) (762MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000be4b2000-0x00000000be7b3000) (3MB)
[ 0.000000] efi: mem19: type=1, attr=0xf, range=[0x00000000be7b3000-0x00000000be7d2000) (0MB)
[ 0.000000] efi: mem20: type=7, attr=0xf, range=[0x00000000be7d2000-0x00000000be7f1000) (0MB)
[ 0.000000] efi: mem21: type=4, attr=0xf, range=[0x00000000be7f1000-0x00000000be808000) (0MB)
[ 0.000000] efi: mem22: type=7, attr=0xf, range=[0x00000000be808000-0x00000000be810000) (0MB)
[ 0.000000] efi: mem23: type=4, attr=0xf, range=[0x00000000be810000-0x00000000be9c4000) (1MB)
[ 0.000000] efi: mem24: type=7, attr=0xf, range=[0x00000000be9c4000-0x00000000be9ca000) (0MB)
[ 0.000000] efi: mem25: type=4, attr=0xf, range=[0x00000000be9ca000-0x00000000bea2f000) (0MB)
[ 0.000000] efi: mem26: type=7, attr=0xf, range=[0x00000000bea2f000-0x00000000beb59000) (1MB)
[ 0.000000] efi: mem27: type=4, attr=0xf, range=[0x00000000beb59000-0x00000000beb5b000) (0MB)
[ 0.000000] efi: mem28: type=7, attr=0xf, range=[0x00000000beb5b000-0x00000000bed30000) (1MB)
[ 0.000000] efi: mem29: type=4, attr=0xf, range=[0x00000000bed30000-0x00000000c8613000) (152MB)
[ 0.000000] efi: mem30: type=7, attr=0xf, range=[0x00000000c8613000-0x00000000c8617000) (0MB)
[ 0.000000] efi: mem31: type=4, attr=0xf, range=[0x00000000c8617000-0x00000000c90e1000) (10MB)
[ 0.000000] efi: mem32: type=7, attr=0xf, range=[0x00000000c90e1000-0x00000000c9789000) (6MB)
[ 0.000000] efi: mem33: type=2, attr=0xf, range=[0x00000000c9789000-0x00000000c9794000) (0MB)
[ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000c9794000-0x00000000c97be000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000c97be000-0x00000000c9dbf000) (6MB)
[ 0.000000] efi: mem36: type=5, attr=0x800000000000000f, range=[0x00000000c9dbf000-0x00000000c9dc2000) (0MB)
[ 0.000000] efi: mem37: type=3, attr=0xf, range=[0x00000000c9dc2000-0x00000000c9dd7000) (0MB)
[ 0.000000] efi: mem38: type=5, attr=0x800000000000000f, range=[0x00000000c9dd7000-0x00000000c9ddd000) (0MB)
[ 0.000000] efi: mem39: type=3, attr=0xf, range=[0x00000000c9ddd000-0x00000000c9ddf000) (0MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000c9ddf000-0x00000000c9de4000) (0MB)
[ 0.000000] efi: mem41: type=3, attr=0xf, range=[0x00000000c9de4000-0x00000000c9f3d000) (1MB)
[ 0.000000] efi: mem42: type=5, attr=0x800000000000000f, range=[0x00000000c9f3d000-0x00000000c9f41000) (0MB)
[ 0.000000] efi: mem43: type=3, attr=0xf, range=[0x00000000c9f41000-0x00000000c9f8b000) (0MB)
[ 0.000000] efi: mem44: type=5, attr=0x800000000000000f, range=[0x00000000c9f8b000-0x00000000c9f92000) (0MB)
[ 0.000000] efi: mem45: type=3, attr=0xf, range=[0x00000000c9f92000-0x00000000c9f94000) (0MB)
[ 0.000000] efi: mem46: type=6, attr=0x800000000000000f, range=[0x00000000c9f94000-0x00000000c9fa1000) (0MB)
[ 0.000000] efi: mem47: type=5, attr=0x800000000000000f, range=[0x00000000c9fa1000-0x00000000c9fb2000) (0MB)
[ 0.000000] efi: mem48: type=3, attr=0xf, range=[0x00000000c9fb2000-0x00000000c9fb5000) (0MB)
[ 0.000000] efi: mem49: type=5, attr=0x800000000000000f, range=[0x00000000c9fb5000-0x00000000c9fb7000) (0MB)
[ 0.000000] efi: mem50: type=3, attr=0xf, range=[0x00000000c9fb7000-0x00000000c9fce000) (0MB)
[ 0.000000] efi: mem51: type=5, attr=0x800000000000000f, range=[0x00000000c9fce000-0x00000000c9fd4000) (0MB)
[ 0.000000] efi: mem52: type=3, attr=0xf, range=[0x00000000c9fd4000-0x00000000c9fdc000) (0MB)
[ 0.000000] efi: mem53: type=5, attr=0x800000000000000f, range=[0x00000000c9fdc000-0x00000000c9fdd000) (0MB)
[ 0.000000] efi: mem54: type=3, attr=0xf, range=[0x00000000c9fdd000-0x00000000c9fec000) (0MB)
[ 0.000000] efi: mem55: type=5, attr=0x800000000000000f, range=[0x00000000c9fec000-0x00000000c9fed000) (0MB)
[ 0.000000] efi: mem56: type=3, attr=0xf, range=[0x00000000c9fed000-0x00000000c9ff8000) (0MB)
[ 0.000000] efi: mem57: type=5, attr=0x800000000000000f, range=[0x00000000c9ff8000-0x00000000c9ffd000) (0MB)
[ 0.000000] efi: mem58: type=3, attr=0xf, range=[0x00000000c9ffd000-0x00000000ca01c000) (0MB)
[ 0.000000] efi: mem59: type=5, attr=0x800000000000000f, range=[0x00000000ca01c000-0x00000000ca01e000) (0MB)
[ 0.000000] efi: mem60: type=3, attr=0xf, range=[0x00000000ca01e000-0x00000000ca032000) (0MB)
[ 0.000000] efi: mem61: type=5, attr=0x800000000000000f, range=[0x00000000ca032000-0x00000000ca033000) (0MB)
[ 0.000000] efi: mem62: type=3, attr=0xf, range=[0x00000000ca033000-0x00000000ca045000) (0MB)
[ 0.000000] efi: mem63: type=5, attr=0x800000000000000f, range=[0x00000000ca045000-0x00000000ca06b000) (0MB)
[ 0.000000] efi: mem64: type=3, attr=0xf, range=[0x00000000ca06b000-0x00000000ca07f000) (0MB)
[ 0.000000] efi: mem65: type=5, attr=0x800000000000000f, range=[0x00000000ca07f000-0x00000000ca080000) (0MB)
[ 0.000000] efi: mem66: type=3, attr=0xf, range=[0x00000000ca080000-0x00000000ca081000) (0MB)
[ 0.000000] efi: mem67: type=5, attr=0x800000000000000f, range=[0x00000000ca081000-0x00000000ca083000) (0MB)
[ 0.000000] efi: mem68: type=3, attr=0xf, range=[0x00000000ca083000-0x00000000ca084000) (0MB)
[ 0.000000] efi: mem69: type=5, attr=0x800000000000000f, range=[0x00000000ca084000-0x00000000ca089000) (0MB)
[ 0.000000] efi: mem70: type=3, attr=0xf, range=[0x00000000ca089000-0x00000000ca0a1000) (0MB)
[ 0.000000] efi: mem71: type=6, attr=0x800000000000000f, range=[0x00000000ca0a1000-0x00000000ca101000) (0MB)
[ 0.000000] efi: mem72: type=5, attr=0x800000000000000f, range=[0x00000000ca101000-0x00000000ca11b000) (0MB)
[ 0.000000] efi: mem73: type=6, attr=0x800000000000000f, range=[0x00000000ca11b000-0x00000000ca120000) (0MB)
[ 0.000000] efi: mem74: type=6, attr=0x800000000000000f, range=[0x00000000ca120000-0x00000000ca126000) (0MB)
[ 0.000000] efi: mem75: type=6, attr=0x800000000000000f, range=[0x00000000ca126000-0x00000000ca128000) (0MB)
[ 0.000000] efi: mem76: type=6, attr=0x800000000000000f, range=[0x00000000ca128000-0x00000000ca145000) (0MB)
[ 0.000000] efi: mem77: type=0, attr=0xf, range=[0x00000000ca145000-0x00000000ca272000) (1MB)
[ 0.000000] efi: mem78: type=0, attr=0xf, range=[0x00000000ca272000-0x00000000ca5da000) (3MB)
[ 0.000000] efi: mem79: type=0, attr=0xf, range=[0x00000000ca5da000-0x00000000ca5e0000) (0MB)
[ 0.000000] efi: mem80: type=0, attr=0xf, range=[0x00000000ca5e0000-0x00000000ca645000) (0MB)
[ 0.000000] efi: mem81: type=10, attr=0xf, range=[0x00000000ca645000-0x00000000ca702000) (0MB)
[ 0.000000] efi: mem82: type=10, attr=0xf, range=[0x00000000ca702000-0x00000000ca8ad000) (1MB)
[ 0.000000] efi: mem83: type=10, attr=0xf, range=[0x00000000ca8ad000-0x00000000ca8b1000) (0MB)
[ 0.000000] efi: mem84: type=10, attr=0xf, range=[0x00000000ca8b1000-0x00000000ca8c5000) (0MB)
[ 0.000000] efi: mem85: type=9, attr=0xf, range=[0x00000000ca8c5000-0x00000000ca8c9000) (0MB)
[ 0.000000] efi: mem86: type=9, attr=0xf, range=[0x00000000ca8c9000-0x00000000ca8ca000) (0MB)
[ 0.000000] efi: mem87: type=4, attr=0xf, range=[0x00000000ca8ca000-0x00000000ca8cb000) (0MB)
[ 0.000000] efi: mem88: type=10, attr=0xf, range=[0x00000000ca8cb000-0x00000000ca90e000) (0MB)
[ 0.000000] efi: mem89: type=4, attr=0xf, range=[0x00000000ca90e000-0x00000000caa58000) (1MB)
[ 0.000000] efi: mem90: type=3, attr=0xf, range=[0x00000000caa58000-0x00000000cacee000) (2MB)
[ 0.000000] efi: mem91: type=4, attr=0xf, range=[0x00000000cacee000-0x00000000cacf3000) (0MB)
[ 0.000000] efi: mem92: type=3, attr=0xf, range=[0x00000000cacf3000-0x00000000cacf7000) (0MB)
[ 0.000000] efi: mem93: type=4, attr=0xf, range=[0x00000000cacf7000-0x00000000cad04000) (0MB)
[ 0.000000] efi: mem94: type=3, attr=0xf, range=[0x00000000cad04000-0x00000000cad16000) (0MB)
[ 0.000000] efi: mem95: type=4, attr=0xf, range=[0x00000000cad16000-0x00000000cad1d000) (0MB)
[ 0.000000] efi: mem96: type=6, attr=0x800000000000000f, range=[0x00000000cad1d000-0x00000000caff4000) (2MB)
[ 0.000000] efi: mem97: type=4, attr=0xf, range=[0x00000000caff4000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem98: type=7, attr=0xf, range=[0x0000000100000000-0x000000012f200000) (754MB)
[ 0.000000] efi: mem99: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem100: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem101: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem102: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem103: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem104: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem105: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. UX32VD/UX32VD, BIOS UX32VD.206 06/06/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x12f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F00000000 write-back
[ 0.000000] 1 base 100000000 mask FE0000000 write-back
[ 0.000000] 2 base 120000000 mask FF0000000 write-back
[ 0.000000] 3 base 0E0000000 mask FE0000000 uncachable
[ 0.000000] 4 base 0D0000000 mask FF0000000 uncachable
[ 0.000000] 5 base 0CC000000 mask FFC000000 uncachable
[ 0.000000] 6 base 0CBC00000 mask FFFC00000 uncachable
[ 0.000000] 7 base 12F800000 mask FFF800000 uncachable
[ 0.000000] 8 base 12F400000 mask FFFC00000 uncachable
[ 0.000000] 9 base 12F200000 mask FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000cbc00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fd7b0] fd7b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000cb000000
[ 0.000000] 0000000000 - 00cb000000 page 2M
[ 0.000000] kernel direct mapping tables up to cb000000 @ 1fffb000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000012f200000
[ 0.000000] 0100000000 - 012f200000 page 2M
[ 0.000000] kernel direct mapping tables up to 12f200000 @ c978e000-c9794000
[ 0.000000] RAMDISK: 37a46000 - 37d1b000
[ 0.000000] ACPI: RSDP 00000000ca894000 00024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 00000000ca894088 00094 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 00000000ca8a83b8 000F4 (v04 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 00000000ca8941b8 141FA (v02 _ASUS_ Notebook 00000013 INTL 20091112)
[ 0.000000] ACPI: FACS 00000000ca8c2f80 00040
[ 0.000000] ACPI: APIC 00000000ca8a84b0 00072 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 00000000ca8a8528 00044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 00000000ca8a8570 000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: MCFG 00000000ca8a8638 0003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: SSDT 00000000ca8a8678 00A3C (v01 DptfTa DptfTab 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a90b8 00CA5 (v01 SADptf SADptf_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9d60 00098 (v01 PchDpt PchDptf 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 00000000ca8a9df8 0091C (v01 CfgTDP CfgTDP_ 00001000 INTL 20091112)
[ 0.000000] ACPI: SLIC 00000000ca8aa718 00176 (v01 _ASUS_ Notebook 01072009 ASUS 00000001)
[ 0.000000] ACPI: HPET 00000000ca8aa890 00038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 00000000ca8aa8c8 00886 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 00000000ca8ab150 00A92 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: DMAR 00000000ca8abbe8 000B8 (v01 INTEL SNB 00000001 INTL 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000012f200000
[ 0.000000] Initmem setup node 0 0000000000000000-000000012f200000
[ 0.000000] NODE_DATA [000000012f1fc000 - 000000012f1fffff]
[ 0.000000] [ffffea0000000000-ffffea0004bfffff] PMD -> [ffff88012a800000-ffff88012e7fffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0012f200
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000c97be
[ 0.000000] 0: 0x000c9dc2 -> 0x000c9dd7
[ 0.000000] 0: 0x000c9ddd -> 0x000c9ddf
[ 0.000000] 0: 0x000c9de4 -> 0x000c9f3d
[ 0.000000] 0: 0x000c9f41 -> 0x000c9f8b
[ 0.000000] 0: 0x000c9f92 -> 0x000c9f94
[ 0.000000] 0: 0x000c9fb2 -> 0x000c9fb5
[ 0.000000] 0: 0x000c9fb7 -> 0x000c9fce
[ 0.000000] 0: 0x000c9fd4 -> 0x000c9fdc
[ 0.000000] 0: 0x000c9fdd -> 0x000c9fec
[ 0.000000] 0: 0x000c9fed -> 0x000c9ff8
[ 0.000000] 0: 0x000c9ffd -> 0x000ca01c
[ 0.000000] 0: 0x000ca01e -> 0x000ca032
[ 0.000000] 0: 0x000ca033 -> 0x000ca045
[ 0.000000] 0: 0x000ca06b -> 0x000ca07f
[ 0.000000] 0: 0x000ca080 -> 0x000ca081
[ 0.000000] 0: 0x000ca083 -> 0x000ca084
[ 0.000000] 0: 0x000ca089 -> 0x000ca0a1
[ 0.000000] 0: 0x000ca8ca -> 0x000ca8cb
[ 0.000000] 0: 0x000ca90e -> 0x000cad1d
[ 0.000000] 0: 0x000caff4 -> 0x000cb000
[ 0.000000] 0: 0x00100000 -> 0x0012f200
[ 0.000000] On node 0 totalpages: 1019347
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 11 pages reserved
[ 0.000000] DMA zone: 3908 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 806020 pages, LIFO batch:31
[ 0.000000] Normal zone: 3016 pages used for memmap
[ 0.000000] Normal zone: 190008 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] SMP: Allowing 4 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000c97be000 - 00000000c9dbf000
[ 0.000000] PM: Registered nosave memory: 00000000c9dbf000 - 00000000c9dc2000
[ 0.000000] PM: Registered nosave memory: 00000000c9dd7000 - 00000000c9ddd000
[ 0.000000] PM: Registered nosave memory: 00000000c9ddf000 - 00000000c9de4000
[ 0.000000] PM: Registered nosave memory: 00000000c9f3d000 - 00000000c9f41000
[ 0.000000] PM: Registered nosave memory: 00000000c9f8b000 - 00000000c9f92000
[ 0.000000] PM: Registered nosave memory: 00000000c9f94000 - 00000000c9fb2000
[ 0.000000] PM: Registered nosave memory: 00000000c9fb5000 - 00000000c9fb7000
[ 0.000000] PM: Registered nosave memory: 00000000c9fce000 - 00000000c9fd4000
[ 0.000000] PM: Registered nosave memory: 00000000c9fdc000 - 00000000c9fdd000
[ 0.000000] PM: Registered nosave memory: 00000000c9fec000 - 00000000c9fed000
[ 0.000000] PM: Registered nosave memory: 00000000c9ff8000 - 00000000c9ffd000
[ 0.000000] PM: Registered nosave memory: 00000000ca01c000 - 00000000ca01e000
[ 0.000000] PM: Registered nosave memory: 00000000ca032000 - 00000000ca033000
[ 0.000000] PM: Registered nosave memory: 00000000ca045000 - 00000000ca06b000
[ 0.000000] PM: Registered nosave memory: 00000000ca07f000 - 00000000ca080000
[ 0.000000] PM: Registered nosave memory: 00000000ca081000 - 00000000ca083000
[ 0.000000] PM: Registered nosave memory: 00000000ca084000 - 00000000ca089000
[ 0.000000] PM: Registered nosave memory: 00000000ca0a1000 - 00000000ca645000
[ 0.000000] PM: Registered nosave memory: 00000000ca645000 - 00000000ca8c5000
[ 0.000000] PM: Registered nosave memory: 00000000ca8c5000 - 00000000ca8ca000
[ 0.000000] PM: Registered nosave memory: 00000000ca8cb000 - 00000000ca90e000
[ 0.000000] PM: Registered nosave memory: 00000000cad1d000 - 00000000caff4000
[ 0.000000] PM: Registered nosave memory: 00000000cb000000 - 00000000cbc00000
[ 0.000000] PM: Registered nosave memory: 00000000cbc00000 - 00000000cfe00000
[ 0.000000] PM: Registered nosave memory: 00000000cfe00000 - 00000000f8000000
[ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
[ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed00000
[ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed04000
[ 0.000000] PM: Registered nosave memory: 00000000fed04000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ff000000
[ 0.000000] PM: Registered nosave memory: 00000000ff000000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at cfe00000 (gap: cfe00000:28200000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:4 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88012ee00000 s82880 r8192 d23616 u524288
[ 0.000000] pcpu-alloc: s82880 r8192 d23616 u524288 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 999936
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=74076a5e-6bff-49aa-919e-351f4417e0d0 ro quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 3751436k/4966400k available (4538k kernel code, 889012k absent, 325952k reserved, 4307k data, 740k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] NR_IRQS:4352 nr_irqs:712 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.003333] Detected 1696.208 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3393.76 BogoMIPS (lpj=5654026)
[ 0.000007] pid_max: default: 32768 minimum: 301
[ 0.000028] init_memory_mapping: 00000000cbc00000-00000000cfe00000
[ 0.000032] 00cbc00000 - 00cfe00000 page 2M
[ 0.151118] Security Framework initialized
[ 0.151124] AppArmor: AppArmor disabled by boot time parameter
[ 0.151478] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.153001] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.153673] Mount-cache hash table entries: 256
[ 0.153885] Initializing cgroup subsys cpuacct
[ 0.153888] Initializing cgroup subsys memory
[ 0.153897] Initializing cgroup subsys devices
[ 0.153899] Initializing cgroup subsys freezer
[ 0.153901] Initializing cgroup subsys net_cls
[ 0.153903] Initializing cgroup subsys blkio
[ 0.153938] CPU: Physical Processor ID: 0
[ 0.153940] CPU: Processor Core ID: 0
[ 0.153946] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.153947] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.154505] mce: CPU supports 7 MCE banks
[ 0.154520] CPU0: Thermal monitoring enabled (TM1)
[ 0.154528] using mwait in idle threads.
[ 0.155909] ACPI: Core revision 20120320
[ 0.173638] ftrace: allocating 17828 entries in 70 pages
[ 0.187014] DMAR: Host address width 36
[ 0.187017] DMAR: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.187030] IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020e60262 ecap f0101a
[ 0.187033] DMAR: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.187044] IOMMU 1: reg_base_addr fed91000 ver 1:0 cap c9008020660262 ecap f0105a
[ 0.187046] DMAR: RMRR base: 0x000000ca395000 end: 0x000000ca3b1fff
[ 0.187049] DMAR: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.187125] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.187127] HPET id 0 under DRHD base 0xfed91000
[ 0.187335] Enabled IRQ remapping in x2apic mode
[ 0.187337] Enabling x2apic
[ 0.187339] Enabled x2apic
[ 0.187348] Switched APIC routing to cluster x2apic.
[ 0.187829] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.220796] CPU0: Intel(R) Core(TM) i5-3317U CPU @ 1.70GHz stepping 09
[ 0.325329] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.325337] ... version: 3
[ 0.325338] ... bit width: 48
[ 0.325340] ... generic registers: 4
[ 0.325342] ... value mask: 0000ffffffffffff
[ 0.325343] ... max period: 000000007fffffff
[ 0.325345] ... fixed-purpose events: 3
[ 0.325347] ... event mask: 000000070000000f
[ 0.345395] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.365318] Booting Node 0, Processors #1
[ 0.379062] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.391966] #2
[ 0.405760] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.418597] #3 Ok.
[ 0.432328] NMI watchdog: enabled, takes one hw-pmu counter.
[ 0.432363] Brought up 4 CPUs
[ 0.432366] Total of 4 processors activated (13575.06 BogoMIPS).
[ 0.436881] devtmpfs: initialized
[ 0.438137] PM: Registering ACPI NVS region [mem 0xc97be000-0xc9dbefff] (6295552 bytes)
[ 0.438244] PM: Registering ACPI NVS region [mem 0xca645000-0xca8c4fff] (2621440 bytes)
[ 0.438288] PM: Registering ACPI NVS region [mem 0xca8cb000-0xca90dfff] (274432 bytes)
[ 0.439159] NET: Registered protocol family 16
[ 0.439285] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.439288] ACPI: bus type pci registered
[ 0.439359] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.439363] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.488790] PCI: Using configuration type 1 for base access
[ 0.489423] bio: create slab <bio-0> at 0
[ 0.489488] ACPI: Added _OSI(Module Device)
[ 0.489490] ACPI: Added _OSI(Processor Device)
[ 0.489492] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.489494] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.492750] ACPI: EC: EC description table is found, configuring boot EC
[ 0.496137] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.598886] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.599592] ACPI: SSDT 00000000ca5f2018 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600414] ACPI: Dynamic OEM Table Load:
[ 0.600417] ACPI: SSDT (null) 00853 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.600767] ACPI: SSDT 00000000ca5f3a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601622] ACPI: Dynamic OEM Table Load:
[ 0.601626] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.601797] ACPI: SSDT 00000000ca5f4c18 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.602615] ACPI: Dynamic OEM Table Load:
[ 0.602618] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.603483] ACPI: Interpreter enabled
[ 0.603488] ACPI: (supports S0 S3 S4 S5)
[ 0.603522] ACPI: Using IOAPIC for interrupt routing
[ 0.709320] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.709614] ACPI: No dock devices found.
[ 0.709618] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.710040] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.710623] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.710626] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.710629] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.710632] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.710634] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.710637] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.710639] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.710643] pci_root PNP0A08:00: host bridge window [mem 0xcfe00000-0xfeafffff]
[ 0.710683] PCI host bridge to bus 0000:00
[ 0.710686] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.710688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.710691] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.710693] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.710696] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.710698] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.710701] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.710703] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.710714] pci 0000:00:00.0: [8086:0154] type 00 class 0x060000
[ 0.710765] pci 0000:00:01.0: [8086:0151] type 01 class 0x060400
[ 0.710808] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.710842] pci 0000:00:02.0: [8086:0166] type 00 class 0x030000
[ 0.710857] pci 0000:00:02.0: reg 10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.710866] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.710873] pci 0000:00:02.0: reg 20: [io 0xf000-0xf03f]
[ 0.710919] pci 0000:00:04.0: [8086:0153] type 00 class 0x118000
[ 0.710933] pci 0000:00:04.0: reg 10: [mem 0xfed98000-0xfed9ffff 64bit]
[ 0.711023] pci 0000:00:14.0: [8086:1e31] type 00 class 0x0c0330
[ 0.711053] pci 0000:00:14.0: reg 10: [mem 0xf7900000-0xf790ffff 64bit]
[ 0.711145] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.711176] pci 0000:00:16.0: [8086:1e3a] type 00 class 0x078000
[ 0.711206] pci 0000:00:16.0: reg 10: [mem 0xf7922000-0xf792200f 64bit]
[ 0.711301] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.711353] pci 0000:00:1a.0: [8086:1e2d] type 00 class 0x0c0320
[ 0.711380] pci 0000:00:1a.0: reg 10: [mem 0xf7920000-0xf79203ff]
[ 0.711490] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.711525] pci 0000:00:1b.0: [8086:1e20] type 00 class 0x040300
[ 0.711543] pci 0000:00:1b.0: reg 10: [mem 0xf7918000-0xf791bfff 64bit]
[ 0.711626] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.711657] pci 0000:00:1c.0: [8086:1e10] type 01 class 0x060400
[ 0.711790] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.711831] pci 0000:00:1c.1: [8086:1e12] type 01 class 0x060400
[ 0.711963] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.712027] pci 0000:00:1d.0: [8086:1e26] type 00 class 0x0c0320
[ 0.712052] pci 0000:00:1d.0: reg 10: [mem 0xf791f000-0xf791f3ff]
[ 0.712164] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.712196] pci 0000:00:1f.0: [8086:1e59] type 00 class 0x060100
[ 0.712346] pci 0000:00:1f.2: [8086:1e03] type 00 class 0x010601
[ 0.712370] pci 0000:00:1f.2: reg 10: [io 0xf0b0-0xf0b7]
[ 0.712380] pci 0000:00:1f.2: reg 14: [io 0xf0a0-0xf0a3]
[ 0.712391] pci 0000:00:1f.2: reg 18: [io 0xf090-0xf097]
[ 0.712400] pci 0000:00:1f.2: reg 1c: [io 0xf080-0xf083]
[ 0.712410] pci 0000:00:1f.2: reg 20: [io 0xf060-0xf07f]
[ 0.712421] pci 0000:00:1f.2: reg 24: [mem 0xf791e000-0xf791e7ff]
[ 0.712480] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.712505] pci 0000:00:1f.3: [8086:1e22] type 00 class 0x0c0500
[ 0.712526] pci 0000:00:1f.3: reg 10: [mem 0xf791d000-0xf791d0ff 64bit]
[ 0.712556] pci 0000:00:1f.3: reg 20: [io 0xf040-0xf05f]
[ 0.712601] pci 0000:00:1f.6: [8086:1e24] type 00 class 0x118000
[ 0.712629] pci 0000:00:1f.6: reg 10: [mem 0xf791c000-0xf791cfff 64bit]
[ 0.712761] pci 0000:01:00.0: [10de:1140] type 00 class 0x030200
[ 0.712778] pci 0000:01:00.0: reg 10: [mem 0xf6000000-0xf6ffffff]
[ 0.712796] pci 0000:01:00.0: reg 14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.712814] pci 0000:01:00.0: reg 1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.712826] pci 0000:01:00.0: reg 24: [io 0xe000-0xe07f]
[ 0.712839] pci 0000:01:00.0: reg 30: [mem 0xf7000000-0xf707ffff pref]
[ 0.718669] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.718673] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.718677] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.718681] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.718759] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.719023] pci 0000:03:00.0: [8086:088e] type 00 class 0x028000
[ 0.719239] pci 0000:03:00.0: reg 10: [mem 0xf7800000-0xf7801fff 64bit]
[ 0.720103] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.725437] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.725447] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.725477] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.725613] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.725684] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.725749] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.725903] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.726168] pci0000:00: ACPI _OSC control (0x18) granted
[ 1.474997] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12)
[ 1.475053] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 12)
[ 1.475105] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 *10 12)
[ 1.475156] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 12)
[ 1.475207] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475258] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 1.475309] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 7 10 12)
[ 1.475359] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 7 10 12)
[ 1.475453] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 1.475460] vgaarb: loaded
[ 1.475461] vgaarb: bridge control possible 0000:00:02.0
[ 1.475508] PCI: Using ACPI for IRQ routing
[ 1.477328] PCI: pci_cache_line_size set to 64 bytes
[ 1.477339] pci 0000:00:04.0: no compatible bridge window for [mem 0xfed98000-0xfed9ffff 64bit]
[ 1.477421] reserve RAM buffer: 000000000009f000 - 000000000009ffff
[ 1.477423] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 1.477426] reserve RAM buffer: 00000000c97be000 - 00000000cbffffff
[ 1.477439] reserve RAM buffer: 00000000c9dd7000 - 00000000cbffffff
[ 1.477451] reserve RAM buffer: 00000000c9ddf000 - 00000000cbffffff
[ 1.477462] reserve RAM buffer: 00000000c9f3d000 - 00000000cbffffff
[ 1.477473] reserve RAM buffer: 00000000c9f8b000 - 00000000cbffffff
[ 1.477484] reserve RAM buffer: 00000000c9f94000 - 00000000cbffffff
[ 1.477494] reserve RAM buffer: 00000000c9fb5000 - 00000000cbffffff
[ 1.477504] reserve RAM buffer: 00000000c9fce000 - 00000000cbffffff
[ 1.477514] reserve RAM buffer: 00000000c9fdc000 - 00000000cbffffff
[ 1.477523] reserve RAM buffer: 00000000c9fec000 - 00000000cbffffff
[ 1.477532] reserve RAM buffer: 00000000c9ff8000 - 00000000cbffffff
[ 1.477540] reserve RAM buffer: 00000000ca01c000 - 00000000cbffffff
[ 1.477548] reserve RAM buffer: 00000000ca032000 - 00000000cbffffff
[ 1.477556] reserve RAM buffer: 00000000ca045000 - 00000000cbffffff
[ 1.477563] reserve RAM buffer: 00000000ca07f000 - 00000000cbffffff
[ 1.477569] reserve RAM buffer: 00000000ca081000 - 00000000cbffffff
[ 1.477575] reserve RAM buffer: 00000000ca084000 - 00000000cbffffff
[ 1.477581] reserve RAM buffer: 00000000ca0a1000 - 00000000cbffffff
[ 1.477586] reserve RAM buffer: 00000000ca8cb000 - 00000000cbffffff
[ 1.477590] reserve RAM buffer: 00000000cad1d000 - 00000000cbffffff
[ 1.477593] reserve RAM buffer: 00000000cb000000 - 00000000cbffffff
[ 1.477596] reserve RAM buffer: 000000012f200000 - 000000012fffffff
[ 1.477696] NetLabel: Initializing
[ 1.477698] NetLabel: domain hash size = 128
[ 1.477699] NetLabel: protocols = UNLABELED CIPSOv4
[ 1.477713] NetLabel: unlabeled traffic allowed by default
[ 1.477738] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 1.477746] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 1.479760] Switching to clocksource hpet
[ 1.485853] pnp: PnP ACPI init
[ 1.485869] ACPI: bus type pnp registered
[ 1.486219] pnp 00:00: [bus 00-3e]
[ 1.486224] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 1.486226] pnp 00:00: [io 0x0cf8-0x0cff]
[ 1.486229] pnp 00:00: [io 0x0d00-0xffff window]
[ 1.486231] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 1.486234] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 1.486236] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 1.486238] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 1.486241] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 1.486243] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 1.486246] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 1.486248] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 1.486250] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 1.486253] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 1.486255] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 1.486257] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 1.486260] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 1.486262] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 1.486264] pnp 00:00: [mem 0xcfe00000-0xfeafffff window]
[ 1.486267] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 1.486345] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 1.486376] pnp 00:01: [mem 0xfed40000-0xfed44fff]
[ 1.486418] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
[ 1.486422] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.533253] pnp 00:02: [io 0x0000-0x001f]
[ 1.533255] pnp 00:02: [io 0x0081-0x0091]
[ 1.533257] pnp 00:02: [io 0x0093-0x009f]
[ 1.533259] pnp 00:02: [io 0x00c0-0x00df]
[ 1.533262] pnp 00:02: [dma 4]
[ 1.533297] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 1.533306] pnp 00:03: [mem 0xff000000-0xffffffff]
[ 1.533336] pnp 00:03: Plug and Play ACPI device, IDs INT0800 (active)
[ 1.533438] pnp 00:04: [mem 0xfed00000-0xfed003ff]
[ 1.533473] pnp 00:04: Plug and Play ACPI device, IDs PNP0103 (active)
[ 1.533487] pnp 00:05: [io 0x002e-0x002f]
[ 1.533489] pnp 00:05: [io 0x004e-0x004f]
[ 1.533491] pnp 00:05: [io 0x0061]
[ 1.533493] pnp 00:05: [io 0x0063]
[ 1.533495] pnp 00:05: [io 0x0065]
[ 1.533497] pnp 00:05: [io 0x0067]
[ 1.533498] pnp 00:05: [io 0x0070]
[ 1.533500] pnp 00:05: [io 0x0080]
[ 1.533502] pnp 00:05: [io 0x0092]
[ 1.533504] pnp 00:05: [io 0x00b2-0x00b3]
[ 1.533506] pnp 00:05: [io 0x0680-0x069f]
[ 1.533508] pnp 00:05: [io 0x0200-0x020f]
[ 1.533510] pnp 00:05: [io 0xffff]
[ 1.533512] pnp 00:05: [io 0xffff]
[ 1.533514] pnp 00:05: [io 0x0400-0x0453]
[ 1.533518] pnp 00:05: [io 0x0458-0x047f]
[ 1.533520] pnp 00:05: [io 0x0500-0x057f]
[ 1.533522] pnp 00:05: [io 0x164e-0x164f]
[ 1.533573] system 00:05: [io 0x0680-0x069f] has been reserved
[ 1.533576] system 00:05: [io 0x0200-0x020f] has been reserved
[ 1.533579] system 00:05: [io 0xffff] has been reserved
[ 1.533581] system 00:05: [io 0xffff] has been reserved
[ 1.533584] system 00:05: [io 0x0400-0x0453] has been reserved
[ 1.533587] system 00:05: [io 0x0458-0x047f] has been reserved
[ 1.533590] system 00:05: [io 0x0500-0x057f] has been reserved
[ 1.533592] system 00:05: [io 0x164e-0x164f] has been reserved
[ 1.533596] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533606] pnp 00:06: [io 0x0070-0x0077]
[ 1.533620] pnp 00:06: [irq 8]
[ 1.533653] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 1.533685] pnp 00:07: [io 0x0454-0x0457]
[ 1.533733] system 00:07: [io 0x0454-0x0457] has been reserved
[ 1.533737] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 1.533764] pnp 00:08: [io 0x0010-0x001f]
[ 1.533767] pnp 00:08: [io 0x0022-0x003f]
[ 1.533769] pnp 00:08: [io 0x0044-0x005f]
[ 1.533771] pnp 00:08: [io 0x0072-0x007f]
[ 1.533773] pnp 00:08: [io 0x0080]
[ 1.533774] pnp 00:08: [io 0x0084-0x0086]
[ 1.533776] pnp 00:08: [io 0x0088]
[ 1.533778] pnp 00:08: [io 0x008c-0x008e]
[ 1.533780] pnp 00:08: [io 0x0090-0x009f]
[ 1.533782] pnp 00:08: [io 0x00a2-0x00bf]
[ 1.533784] pnp 00:08: [io 0x00e0-0x00ef]
[ 1.533786] pnp 00:08: [io 0x04d0-0x04d1]
[ 1.533836] system 00:08: [io 0x04d0-0x04d1] has been reserved
[ 1.533840] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.533849] pnp 00:09: [io 0x00f0-0x00ff]
[ 1.533858] pnp 00:09: [irq 13]
[ 1.533892] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 1.533945] pnp 00:0a: [irq 12]
[ 1.533982] pnp 00:0a: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 1.534008] pnp 00:0b: [io 0x0060]
[ 1.534010] pnp 00:0b: [io 0x0064]
[ 1.534017] pnp 00:0b: [irq 1]
[ 1.534053] pnp 00:0b: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
[ 1.534293] pnp 00:0c: [mem 0xfed1c000-0xfed1ffff]
[ 1.534295] pnp 00:0c: [mem 0xfed10000-0xfed17fff]
[ 1.534297] pnp 00:0c: [mem 0xfed18000-0xfed18fff]
[ 1.534300] pnp 00:0c: [mem 0xfed19000-0xfed19fff]
[ 1.534302] pnp 00:0c: [mem 0xf8000000-0xfbffffff]
[ 1.534304] pnp 00:0c: [mem 0xfed20000-0xfed3ffff]
[ 1.534306] pnp 00:0c: [mem 0xfed90000-0xfed93fff]
[ 1.534308] pnp 00:0c: [mem 0xfed45000-0xfed8ffff]
[ 1.534310] pnp 00:0c: [mem 0xff000000-0xffffffff]
[ 1.534313] pnp 00:0c: [mem 0xfee00000-0xfeefffff]
[ 1.534315] pnp 00:0c: [mem 0xcfe00000-0xcfe00fff]
[ 1.534382] system 00:0c: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 1.534385] system 00:0c: [mem 0xfed10000-0xfed17fff] has been reserved
[ 1.534388] system 00:0c: [mem 0xfed18000-0xfed18fff] has been reserved
[ 1.534392] system 00:0c: [mem 0xfed19000-0xfed19fff] has been reserved
[ 1.534395] system 00:0c: [mem 0xf8000000-0xfbffffff] has been reserved
[ 1.534398] system 00:0c: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 1.534401] system 00:0c: [mem 0xfed90000-0xfed93fff] has been reserved
[ 1.534404] system 00:0c: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 1.534407] system 00:0c: [mem 0xff000000-0xffffffff] has been reserved
[ 1.534413] system 00:0c: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 1.534416] system 00:0c: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534420] system 00:0c: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534494] pnp 00:0d: [mem 0xcfe00000-0xcfe00fff]
[ 1.534558] system 00:0d: [mem 0xcfe00000-0xcfe00fff] has been reserved
[ 1.534562] system 00:0d: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 1.534715] pnp 00:0e: [mem 0x20000000-0x201fffff]
[ 1.534718] pnp 00:0e: [mem 0x40004000-0x40004fff]
[ 1.534783] system 00:0e: [mem 0x20000000-0x201fffff] has been reserved
[ 1.534786] system 00:0e: [mem 0x40004000-0x40004fff] has been reserved
[ 1.534790] system 00:0e: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 1.534823] pnp: PnP ACPI: found 15 devices
[ 1.534824] ACPI: ACPI bus type pnp unregistered
[ 1.541624] pci 0000:00:04.0: BAR 0: assigned [mem 0xcfe08000-0xcfe0ffff 64bit]
[ 1.541631] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 1.541634] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 1.541638] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 1.541642] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541647] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 1.541662] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 1.541670] pci 0000:00:1c.1: bridge window [mem 0xf7800000-0xf78fffff]
[ 1.541716] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 1.541719] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 1.541721] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 1.541724] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
[ 1.541727] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
[ 1.541729] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
[ 1.541732] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
[ 1.541734] pci_bus 0000:00: resource 11 [mem 0xcfe00000-0xfeafffff]
[ 1.541737] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 1.541739] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 1.541742] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 1.541745] pci_bus 0000:03: resource 1 [mem 0xf7800000-0xf78fffff]
[ 1.541791] NET: Registered protocol family 2
[ 1.541920] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 1.542713] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 1.544194] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 1.544343] TCP: Hash tables configured (established 524288 bind 65536)
[ 1.544346] TCP: reno registered
[ 1.544359] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544378] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 1.544464] NET: Registered protocol family 1
[ 1.544482] pci 0000:00:02.0: Boot video device
[ 1.579823] PCI: CLS 64 bytes, default 64
[ 1.579868] Unpacking initramfs...
[ 1.651952] Freeing initrd memory: 2900k freed
[ 1.652345] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 1.652349] Placing 64MB software IO TLB between ffff8800ba4b2000 - ffff8800be4b2000
[ 1.652351] software IO TLB at phys 0xba4b2000 - 0xbe4b2000
[ 1.652909] audit: initializing netlink socket (disabled)
[ 1.652920] type=2000 audit(1343310419.543:1): initialized
[ 1.653295] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 1.655215] VFS: Disk quotas dquot_6.5.2
[ 1.655264] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 1.655387] msgmni has been set to 7683
[ 1.655586] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 1.655616] io scheduler noop registered
[ 1.655619] io scheduler deadline registered
[ 1.655674] io scheduler cfq registered (default)
[ 1.655790] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
[ 1.656047] efifb: probing for efifb
[ 1.658527] efifb: framebuffer at 0xd0000000, mapped to 0xffffc9000a200000, using 3072k, total 3072k
[ 1.658530] efifb: mode is 1024x768x32, linelength=4096, pages=1
[ 1.658532] efifb: scrolling: redraw
[ 1.658534] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 1.661755] Console: switching to colour frame buffer device 128x48
[ 1.664865] fb0: EFI VGA frame buffer device
[ 1.664872] intel_idle: does not run on family 6 model 58
[ 1.664905] GHES: HEST is not enabled!
[ 1.664976] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 1.665554] Linux agpgart interface v0.103
[ 1.665643] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1.667162] i8042: Detected active multiplexing controller, rev 1.1
[ 1.668312] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.668346] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1.668370] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1.668392] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1.668415] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1.668518] mousedev: PS/2 mouse device common for all mice
[ 1.668581] rtc_cmos 00:06: RTC can wake from S4
[ 1.668727] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.668756] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 1.668766] cpuidle: using governor ladder
[ 1.668768] cpuidle: using governor menu
[ 1.668897] TCP: cubic registered
[ 1.669011] NET: Registered protocol family 10
[ 1.669206] NET: Registered protocol family 17
[ 1.669210] Registering the dns_resolver key type
[ 1.669345] PM: Hibernation image not present or could not be loaded.
[ 1.669352] registered taskstats version 1
[ 1.669923] rtc_cmos 00:06: setting system clock to 2012-07-26 13:47:00 UTC (1343310420)
[ 1.670074] Initializing network drop monitor service
[ 1.671692] Freeing unused kernel memory: 740k freed
[ 1.671810] Write protecting the kernel read-only data: 8192k
[ 1.677537] Freeing unused kernel memory: 1588k freed
[ 1.680114] Freeing unused kernel memory: 640k freed
[ 1.688393] systemd-udevd[48]: starting version 186
[ 1.702336] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 1.729878] usbcore: registered new interface driver usbfs
[ 1.729905] usbcore: registered new interface driver hub
[ 1.729967] usbcore: registered new device driver usb
[ 1.730626] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.730703] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.730709] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.730735] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.730768] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.733581] SCSI subsystem initialized
[ 1.734651] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.734672] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf7920000
[ 1.735298] libata version 3.00 loaded.
[ 1.742916] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.743591] hub 1-0:1.0: USB hub found
[ 1.743601] hub 1-0:1.0: 2 ports detected
[ 1.743896] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.743903] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.743919] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.743958] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.747853] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.747877] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf791f000
[ 1.756260] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.756431] hub 2-0:1.0: USB hub found
[ 1.756436] hub 2-0:1.0: 2 ports detected
[ 1.756777] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.756784] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.756817] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.756946] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.756957] xhci_hcd 0000:00:14.0: irq 16, io mem 0xf7900000
[ 1.757034] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
[ 1.757594] xHCI xhci_add_endpoint called for root hub
[ 1.757598] xHCI xhci_check_bandwidth called for root hub
[ 1.757646] hub 3-0:1.0: USB hub found
[ 1.757657] hub 3-0:1.0: 4 ports detected
[ 1.757744] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.757751] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.757848] xHCI xhci_add_endpoint called for root hub
[ 1.757851] xHCI xhci_check_bandwidth called for root hub
[ 1.757894] hub 4-0:1.0: USB hub found
[ 1.757905] hub 4-0:1.0: 4 ports detected
[ 1.759643] ahci 0000:00:1f.2: version 3.0
[ 1.759745] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
[ 1.759829] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x3 impl SATA mode
[ 1.759836] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 1.759845] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.766833] scsi0 : ahci
[ 1.766937] scsi1 : ahci
[ 1.767022] scsi2 : ahci
[ 1.767101] scsi3 : ahci
[ 1.767184] scsi4 : ahci
[ 1.767262] scsi5 : ahci
[ 1.767498] ata1: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e100 irq 44
[ 1.767503] ata2: SATA max UDMA/133 abar m2048@0xf791e000 port 0xf791e180 irq 44
[ 1.767505] ata3: DUMMY
[ 1.767507] ata4: DUMMY
[ 1.767508] ata5: DUMMY
[ 1.767510] ata6: DUMMY
[ 2.049225] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 2.085851] ata2: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.085878] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 2.086220] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086306] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086310] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086526] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.086607] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.086610] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.086623] ata2.00: ATA-9: SanDisk SSD i100 32GB, 11.50.00, max UDMA/133
[ 2.086626] ata2.00: 62533296 sectors, multi 1: LBA48 NCQ (depth 31/32)
[ 2.087041] ata2.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087128] ata2.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087131] ata2.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087143] ata1.00: ATA-9: SAMSUNG SSD 830 Series, CXM03B1Q, max UDMA/133
[ 2.087146] ata1.00: 125045424 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 2.087320] ata2.00: configured for UDMA/133
[ 2.087589] ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (SECURITY FREEZE LOCK) filtered out
[ 2.087650] ata1.00: ACPI cmd ef/10:06:00:00:00:a0 (SET FEATURES) succeeded
[ 2.087669] ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 2.087920] ata1.00: configured for UDMA/133
[ 2.088043] scsi 0:0:0:0: Direct-Access ATA SAMSUNG SSD 830 CXM0 PQ: 0 ANSI: 5
[ 2.088297] scsi 1:0:0:0: Direct-Access ATA SanDisk SSD i100 11.5 PQ: 0 ANSI: 5
[ 2.093498] sd 0:0:0:0: [sda] 125045424 512-byte logical blocks: (64.0 GB/59.6 GiB)
[ 2.093608] sd 0:0:0:0: [sda] Write Protect is off
[ 2.093612] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 2.093648] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.093819] sd 1:0:0:0: [sdb] 62533296 512-byte logical blocks: (32.0 GB/29.8 GiB)
[ 2.093913] sd 1:0:0:0: [sdb] Write Protect is off
[ 2.093919] sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00
[ 2.093951] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 2.095497] sda: sda1 sda2
[ 2.095893] sd 0:0:0:0: [sda] Attached SCSI disk
[ 2.096681] sdb: sdb1 sdb2 sdb3
[ 2.096999] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 2.173153] hub 1-1:1.0: USB hub found
[ 2.173332] hub 1-1:1.0: 6 ports detected
[ 2.227030] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 2.332228] usb 3-3: new high-speed USB device number 2 using xhci_hcd
[ 2.359348] usb 3-3: ep 0x82 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.359354] usb 3-3: ep 0x3 - rounding interval to 32768 microframes, ep desc says 0 microframes
[ 2.415509] systemd-udevd[144]: starting version 186
[ 2.465386] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 2.465658] [drm] Initialized drm 1.1.0 20060810
[ 2.468971] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 2.482290] ACPI: Lid Switch [LID]
[ 2.483112] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 2.483119] ACPI: Power Button [PWRB]
[ 2.484540] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
[ 2.484548] ACPI: Sleep Button [SLPB]
[ 2.488074] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 2.488698] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 2.491571] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 2.491779] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 2.494298] ACPI: Requesting acpi_cpufreq
[ 2.507995] i915 0000:00:02.0: setting latency timer to 64
[ 2.530014] thermal LNXTHERM:00: registered as thermal_zone0
[ 2.530018] ACPI: Thermal Zone [THRM] (52 C)
[ 2.530047] ACPI: AC Adapter [AC0] (on-line)
[ 2.532019] Monitor-Mwait will be used to enter C-1 state
[ 2.532089] Monitor-Mwait will be used to enter C-2 state
[ 2.532122] ACPI: acpi_idle registered with cpuidle
[ 2.555771] ACPI: Battery Slot [BAT0] (battery present)
[ 2.561573] wmi: Mapper loaded
[ 2.564667] iTCO_vendor_support: vendor-support=0
[ 2.565251] mei: module is from the staging directory, the quality is unknown, you have been warned.
[ 2.568922] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 2.569169] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 2.569279] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 2.584441] cfg80211: Calling CRDA to update world regulatory domain
[ 2.587955] MXM: GUID detected in BIOS
[ 2.588023] ACPI Error: Needed [Buffer/String/Package], found [Integer] ffff8801271a6000 (20120320/exresop-590)
[ 2.588032] ACPI Exception: AE_AML_OPERAND_TYPE, While resolving operands for [OpcodeName unavailable] (20120320/dswexec-460)
[ 2.588044] ACPI Error: Method parse/execution failed [\_SB_.PCI0.GFX0._DSM] (Node ffff880128e88348), AE_AML_OPERAND_TYPE (20120Sometimes with Intel driver I can see mouse while loading gdm, but then it goes to black.
I tried to boot with Intel driver with "drm.debug=14" and "log_buf_len=16M" as boot parameters. There is debug log from gdm, it seems to have some errors, I have not yet looked deeble on it:
gnome-session[1269]: DEBUG(+): Enabling debugging
gnome-session[1269]: DEBUG(+): GsmXsmpServer: SESSION_MANAGER=local/Louis-laptop:@/tmp/.ICE-unix/1269,unix/Louis-laptop:/tmp/.ICE-unix/1269
gnome-session[1269]: DEBUG(+): GsmShell: Not connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: setting client store 0xe4e070
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 1: signum=4 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 4 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 2: signum=7 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 7 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 3: signum=11 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 11 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 4: signum=6 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 6 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 5: signum=5 (nil)
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 5 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 6: signum=8 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 8 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 7: signum=1 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 1 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 8: signum=10 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 10 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 9: signum=15 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 15 signals
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Adding handler 10: signum=2 0x41c9e0
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Registering for 2 signals
gnome-session[1269]: DEBUG(+): fill: *** Getting session 'gdm-shell'
gnome-session[1269]: DEBUG(+): fill: *** Looking if /var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/var/lib/gdm/.config/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /etc/xdg/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/etc/xdg/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/share/gdm/greeter/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/local/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): Cannot use session '/usr/local/share/gnome-session/sessions/gdm-shell.session': non-existing or invalid file.
gnome-session[1269]: DEBUG(+): fill: *** Looking if /usr/share/gnome-session/sessions/gdm-shell.session is a valid session file
gnome-session[1269]: DEBUG(+): fill: *** Launching helper 'bash -c 'gnome-shell --help | grep -q gdm-mode && /usr/lib/gnome-session/gnome-session-check-accelerated'' to know if session is runnable
gnome-session[1269]: DEBUG(+): fill: *** Checking required components and providers
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): fill: *** Done checking required components and providers
gnome-session[1269]: DEBUG(+): fill: *** Adding required components
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/usr/share/gdm/greeter/applications/gnome-shell.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /usr/share/gdm/greeter/applications/gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App1 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-shell.desktop
gnome-session[1269]: DEBUG(+): GsmUtil: Looking for file 'gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.config/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gnome/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/etc/xdg/autostart'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/var/lib/gdm/.local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/gdm/greeter/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/local/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: Looking in '/usr/share/applications'
gnome-session[1269]: DEBUG(+): GsmUtil: found in XDG dirs: '/etc/xdg/autostart/gnome-settings-daemon.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: read /etc/xdg/autostart/gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/App2 to store
gnome-session[1269]: DEBUG(+): GsmManager: adding required app gnome-settings-daemon.desktop
gnome-session[1269]: DEBUG(+): fill: *** Done adding required components
gnome-session[1269]: DEBUG(+): fill: *** Adding default providers
gnome-session[1269]: DEBUG(+): fill: *** Done adding default providers
gnome-session[1269]: DEBUG(+): GsmManager: GSM starting to manage
gnome-session[1269]: DEBUG(+): GsmManager: App startup summary
gnome-session[1269]: DEBUG(+): GsmManager: Phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App2 app-id:gnome-settings-daemon.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: Phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: Phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: Phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: Phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: ID: /org/gnome/SessionManager/App1 app-id:gnome-shell.desktop is-disabled:0 is-conditionally-disabled:0
gnome-session[1269]: DEBUG(+): GsmManager: starting phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App2'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-settings-daemon.desktop: command=/usr/lib/gnome-settings-daemon/gnome-settings-daemon startup-id=10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1279
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418445168000000012690002 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1360
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client1 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager interface=org.gnome.SessionManager method=RegisterClient
gnome-session[1269]: DEBUG(+): GsmManager: RegisterClient 10bba787d7390cc455134324418397061300000012690001
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418397061300000012690001 to session
gnome-session[1269]: DEBUG(+): uid = 120
gnome-session[1269]: DEBUG(+): pid = 1279
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client2 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): App gnome-settings-daemon.desktop registered
gnome-session[1269]: DEBUG(+): GsmManager: ending phase INITIALIZATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: ending phase WINDOW_MANAGER
gnome-session[1269]: DEBUG(+): GsmManager: starting phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: ending phase PANEL
gnome-session[1269]: DEBUG(+): GsmManager: starting phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: ending phase DESKTOP
gnome-session[1269]: DEBUG(+): GsmManager: starting phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting app '/org/gnome/SessionManager/App1'
gnome-session[1269]: DEBUG(+): Starting app: /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmAutostartApp: starting gnome-shell.desktop: command=gnome-shell --gdm-mode startup-id=10bba787d7390cc455134324418396973400000012690000
gnome-session[1269]: DEBUG(+): GsmAutostartApp: started pid:1369
gnome-session[1269]: DEBUG(+): GsmManager: ending phase APPLICATION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase RUNNING
gnome-session[1269]: DEBUG(+): GsmPresence: adding idle watch
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for positive transition wait=600000
gnome-session[1269]: DEBUG(+): GSIdleMonitor: creating new alarm for negative transition wait=599999
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmXsmpServer: accept_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXsmpServer: auth_ice_connection()
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Setting up new connection
gnome-session[1269]: DEBUG(+): GsmXSMPClient: New client '0xe99030 []'
gnome-session[1269]: DEBUG(+): GsmStore: Adding object id /org/gnome/SessionManager/Client3 to store
gnome-session[1269]: DEBUG(+): GsmManager: Client added: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Initializing client 0xe99030 []
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 []' received RegisterClient(10bba787d7390cc455134324418396973400000012690000)
gnome-session[1269]: DEBUG(+): GsmManager: Adding new client 10bba787d7390cc455134324418396973400000012690000 to session
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Sending RegisterClientReply to '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Set properties from client '0xe99030 [10bba787d7390cc455134324418396973400000012690000]'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Program = 'gnome-shell'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: UserID = 'gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: RestartStyleHint = 0
gnome-session[1269]: DEBUG(+): GsmXSMPClient: ProcessID = '1369'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: CurrentDirectory = '/var/lib/gdm'
gnome-session[1269]: DEBUG(+): GsmXSMPClient: _GSM_Priority = 20
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Presence interface=org.freedesktop.DBus.Properties method=GetAll
Window manager warning: CurrentTime used to choose focus window; focus window may not be correct.
Window manager warning: Got a request to focus the no_focus_window with a timestamp of 0. This shouldn't happen!
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GdmSignalHandler: handling signal 15
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Found 1 callbacks
gnome-session[1269]: DEBUG(+): GdmSignalHandler: running 15 handler: 0x41c9e0
gnome-session[1269]: DEBUG(+): Got callback for signal 15
gnome-session[1269]: DEBUG(+): GsmManager: Logout called
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: requesting logout
gnome-session[1269]: DEBUG(+): GsmManager: ending phase RUNNING
gnome-session[1269]: DEBUG(+): GsmManager: starting phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: sending query-end-session to clients (logout mode: forceful)
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.8
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: sending QueryEndSession signal to :1.2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to query clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): Caught signal 15, shutting down normally.
gnome-session[1269]: DEBUG(+): GdmSignalHandler: Done handling signals
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, 9, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: query end session complete
gnome-session[1269]: DEBUG(+): GsmShell: Connected to the shell
gnome-session[1269]: DEBUG(+): GsmManager: ending phase QUERY_END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: starting phase END_SESSION
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: adding client to end-session clients: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received SaveYourselfDone(success = True)
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmXsmpServer: sms_error_handler (0xfc3640, FALSE, 3, c, 32771, 0)
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client1 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/gnome/SessionManager/Client2 interface=org.gnome.SessionManager.ClientPrivate method=EndSessionResponse
gnome-session[1269]: DEBUG(+): GsmDBusClient: got EndSessionResponse is-ok:1 reason=
gnome-session[1269]: DEBUG(+): GsmManager: Response from end session request: is-ok=1 do-last=0 cancel=0 reason=
gnome-session[1269]: DEBUG(+): GsmManager: ending phase END_SESSION
gnome-session[1269]: DEBUG(+): Using ConsoleKit for session tracking
gnome-session[1269]: DEBUG(+): GsmManager: starting phase EXIT
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_stop ('0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]')
gnome-session[1269]: DEBUG(+): GsmManager: stopped client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: Client '0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000]' received CloseConnection
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe99030
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client3
gnome-session[1269]: DEBUG(+): GsmXSMPClient: xsmp_finalize (0xe99030 [gnome-shell 10bba787d7390cc455134324418396973400000012690000])
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: disconnect for app 'at-spi-registryd.desktop'
gnome-session[1269]: DEBUG(+): GsmManager: unable to find application for client - not restarting
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe7ff30
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client1
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=/org/freedesktop/DBus interface=org.freedesktop.DBus method=NameOwnerChanged
gnome-session[1269]: DEBUG(+): GsmDBusClient: obj_path=(null) interface=(null) method=(null)
gnome-session[1269]: DEBUG(+): GsmManager: disconnect client: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: in shutdown, not restarting application
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xe9b020
gnome-session[1269]: DEBUG(+): GsmClient: disposing /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: Client removed: /org/gnome/SessionManager/Client2
gnome-session[1269]: DEBUG(+): GsmManager: last client disconnected - exiting
gnome-session[1269]: DEBUG(+): GsmManager: ending phase EXIT
gnome-session[1269]: DEBUG(+): Unreffing manager
gnome-session[1269]: DEBUG(+): GsmManager: disposing manager
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece830
gnome-session[1269]: DEBUG(+): GsmStore: Unreffing object: 0xece910
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App2
gnome-session[1269]: DEBUG(+): GsmStore: emitting removed for /org/gnome/SessionManager/App1
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
(gnome-settings-daemon:1279): GLib-GObject-CRITICAL **: g_object_unref: assertion `G_IS_OBJECT (object)' failed
gnome-session[1269]: DEBUG(+): GsmStore: Clearing object store
PolicyKit daemon disconnected from the bus.
We are no longer a registered authentication agent.
g_dbus_connection_real_closed: Remote peer vanished with error: Underlying GIOStream returned 0 bytes on an async read (g-io-error-quark, 0). Exiting.
Window manager warning: Log level 16: gnome-shell: Fatal IO error 0 (Success) on X server :0. -
[solved] Dual head / Xinerama / xrandr setup with Intel 945 & dwm
Recently came into possession of a 17" LCD and would like to use it in tandem with the internal LCD of my netbook. Clone works with xrandr, as does extended mode to an extent. The problem is that in extended mode (or spanning, or whatever you want to call it) the smaller screen has dead space which isn't respected by dwm (or any other WM I've tried). So I'd like to setup dual X sessions (aka Zaphod mode?), each running their own instance of dwm--I don't need to move windows from screen to screen so that's not a concern.
Has anyone had luck accomplishing this with the current intel driver? The closest I've gotten so far is a black screen/blinking cursor which drops back to a login prompt after a few seconds. I see a ton of related topics on Google about this and most of them are unresolved. If I can get something put together I'll document it in the dwm and/or intel wikis.
Specs:
* Acer Aspire One AOD150 with Intel GMA945 @ 1024x600
* LCD @ 1280x1024
Last edited by thayer (2009-08-30 05:03:14)It's a work in progress, but for those who are interested I was able to get a dual-head setup (using xrandr and the Xinerama extensions) with the current Intel driver (not legacy) using the following:
/etc/X11/xorg.conf:
# file: /etc/X11/xorg.conf
# author: Thayer Williams - http://cinderwick.ca
# vim:enc=utf-8:nu:ai:si:et:ts=4:sw=4:ft=sh:
Section "ServerLayout"
Identifier "AA1Xorg"
Screen 0 "AA1Screen" 0 0
InputDevice "AA1Keyboard" "CoreKeyboard"
InputDevice "LogitechMX518" "CorePointer"
InputDevice "SynapticsTouchpad" "AlwaysCore"
Option "BlankTime" "0"
Option "StandbyTime" "0"
Option "SuspendTime" "0" # disable all other forms of power save
Option "OffTime" "10" # turn off DPMS-capable monitor after x mins
EndSection
Section "ServerFlags"
Option "DontZap" "false" # ctrl+alt+backspace to restart x (see input too)
Option "AIGLX" "false"
Option "AutoAddDevices" "false" # false to disabl hal hotplugging
Option "AllowMouseOpenFail" "true" # load Xorg even if mouse input not found
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/artwiz-fonts"
FontPath "/usr/share/fonts/local"
EndSection
Section "Module"
Load "synaptics"
EndSection
Section "InputDevice"
Identifier "AA1Keyboard"
Driver "kbd"
Option "CoreKeyboard"
Option "XkbModel" "pc105"
Option "XkbLayout" "us"
Option "XkbOptions" "terminate:ctrl_alt_bksp" # yes, we really want ctrl+alt+backspace to restart X
EndSection
Section "InputDevice"
Identifier "LogitechMX518"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "Protocol" "ExplorerPS/2" # options: ExplorerPS/2, IMPS/2, auto, USB (Exp. req'd for side-buttons)
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
Option "ButtonMapping" "1 2 3 8 9"
Option "Emulate3Buttons" "no"
EndSection
Section "InputDevice"
Identifier "SynapticsTouchpad"
Driver "synaptics"
#Option "Device" "/dev/input/mice"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "ZAxisMapping" "4 5 6 7"
Option "SHMConfig" "true" # configurable at runtime? security risk if on
Option "LeftEdge" "1700" # x coord left
Option "RightEdge" "5300" # x coord right
Option "TopEdge" "1700" # y coord top
Option "BottomEdge" "4200" # y coord bottom
Option "FingerLow" "25" # pressure below this level triggers release
Option "FingerHigh" "30" # pressure above this level triggers touch
Option "TapButton1" "1" # mouse button reported on a non-corner one-finger tap
Option "TapButton2" "2" # mouse button reported on a non-corner two-finger tap
Option "FastTaps" "true" # make single-taps faster, and double-taps slower
Option "MaxTapTime" "180" # max time in ms for detecting tap
Option "MaxTapMove" "220"
Option "VertEdgeScroll" "true" # enable vertical scroll zone
Option "HorizEdgeScroll" "true" # enable horizontal scroll zone
Option "CornerCoasting" "true" # enable continuous scroll with finger in corner
Option "CoastingSpeed" "0.30" # corner coasting speed
Option "VertScrollDelta" "100" # edge-to-edge scroll distance of the vertical scroll
Option "HorizScrollDelta" "100" # edge-to-edge scroll distance of the horizontal scroll
Option "MinSpeed" "0.09" # speed factor for low pointer movement
Option "MaxSpeed" "0.18" # maximum speed factor for fast pointer movement
Option "AccelFactor" "0.0015" # acceleration factor for normal pointer movements
Option "VertTwoFingerScroll" "true" # vertical scroll anywhere with two fingers
Option "HorizTwoFingerScroll" "true" # horizontal scroll anywhere with two fingers
EndSection
Section "Monitor"
Identifier "AA1Monitor"
VendorName "Acer"
Option "DPMS" "true"
HorizSync 28-96
VertRefresh 50-75
EndSection
Section "Device"
Identifier "Intel945"
Driver "intel"
BusID "PCI:0:2:0"
Option "Tiling" "false" # controls whether buffers are allocated in tiled mode
EndSection
Section "Screen"
Identifier "AA1Screen"
Device "Intel945"
Monitor "AA1Monitor"
SubSection "Display"
Depth 24
Modes "1280x1024" "1280x600" "1024x768" "1024x600" "800x600" "640x480"
Virtual 2048 2048
EndSubSection
EndSection
Until I have a chance to write a fancier script I've added the following to ~/.xinitrc:
xrandr --output LVDS1 --mode 1024x600
xrandr --output VGA1 --below LVDS1 --mode 1280x1024
The first command ensures the netbook screen takes the proper resolution and the second enables the external LCD. If I startx when the LCD is disconnected then the netbook screen is the only screen enabled (no dead space).
Caveats
1. With mplayer in fullscreen it appears as 1024x600 even when opened on the 1280x1024 screen.
2. The external LCD cannot be placed left or right of the netbook screen because it would exceed the 2048 virtual resolution which segfaults X with the latest intel driver. Virtual cannot be set higher than 2048 in either direction without segfaulting X; though I imagine this will be addressed in future versions of the intel driver.
Many thanks to mzapotoczny!
Last edited by thayer (2009-08-30 04:41:40) -
Low Volume with Intel HDA ALC889
Hi,
I have a Intel board with Intel HDA ALC889 and I get sound out of it without problems. To get a half-decent volume, I have to set all volume controls (i.e. Master, PCM, Front) to 100 %, but sometimes it is still too quiet. Additionally, when I increase Mic Boost for Skype, all that gets louder is the background noise.
Sorry for the German locale, but here is the output of aplay -l:
$ aplay -l
**** Liste der Hardware-Geräte (PLAYBACK) ****
Karte 0: Intel [HDA Intel], Gerät 0: ALC889 Analog [ALC889 Analog]
Sub-Geräte: 0/1
Sub-Gerät #0: subdevice #0
uname -a:
$ uname -a
Linux odyssey 2.6.30-ARCH #1 SMP PREEMPT Wed Sep 9 14:16:44 CEST 2009 x86_64 Intel(R) Xeon(R) CPU E5504 @ 2.00GHz GenuineIntel GNU/Linux
Is there any solution to get a better volume?
Thanks in advance.
Kind regards
ThomasNo one with a clue?
Well, I already tried to set
options snd-hda-intel model=intel-x58
according to http://www.kernel.org/doc/Documentation … Models.txt as I'd say my board is nearest to a X58 board. But that didn't change anything.
Can it be a hardware "problem" or something else? Until now, I'm unwilling to spend money on an additional sound card if there is a solution...
Thomas
Maybe you are looking for
-
Hi, We are having a common SLD for development and production environment. We have a set of business systems, belonging to third party technical system, from which we get files and we post them to R3. Each business system has a logical system name as
-
USB port stopped working in macbook pro
Hi, i bought a macbook pro, OS X lion, version 10.7.4 a month ago. one of my USB port suddenly stopped working. i am a new mac user, so i have very less idea about mac. i would appreciate if someone could give me step by step solution to this problem
-
SAP Java Gui in Solaris 10 x86.
Who run the Java Gui in Solaris 10 x86? After I installed Java Gui in Solaris 10 x86 and run guilogon, when I connect the server I created, I got the error message: Attempt to load shared library /opt/SAPClients/SAPGui7.00/binlibJPlatin.so failed. Th
-
Webdynpro Application and RFC problem
Hi all, I have a webdynpro application that has a model with a RFC that allow users store a file into the disk, but when I try to run the application and pressed the button that make the call to the RFC I get the following error: Exception condition
-
Hello , I have downloaded a trial version of warehouse builder 9.2 and installed it perfectly. I created a simple source table and a target table,which I linked with the filter operator and named the mapping t_map. Even after the validation of the ma