[SOLVED] Low resolution on game exit
I was doing some research, but was not able to find an acceptable solution.
When I exit a game my resolution will go to 800x600 every time.
(My resolution is 1366x768)
I'm pretty sure that I can do something like "when you exit a game/full-screen mode app, restart X to 1366x768".
Should be fairly easy to do, but I don't know exactly where and what to add/edit, so I would be very thankful for any kind of help.
Last edited by MatejLach (2011-08-27 16:51:27)
HA! Beat me to it
xrandr -s 1366x768
If it is a persistent problem you could wrap the offending binary in a script to auto fire the screen resolution reset on exit
Consider it as home work
Last edited by satanselbow (2011-08-27 16:07:09)
Similar Messages
-
[SOLVED] Extra resolutions for games with Nvidia drivers
When using the nouveau drivers, games and other such applications will allow me to select any resolution my screens (one 1920x1080, the other 1680x1050-- the latter of which is to the left of the first) will support, as well as 3600x1080, the combined total (spanning both screens). For instance, I can make something like Tux Racer 1280x800, and either windowed or fullscreen. However, with the Nvidia proprietary drivers, the only resolutions that I can select are 1920x1080, 1680x1050, and 3600x1080. This prevents me from playing windowed games in such a way that they don't cover my whole screen, or playing fullscreen games at lower resolutions for higher performance. How can I use the Nvidia drivers and the "extra" resolutions? (Ideally, all those listed in the Xinerama output below)
Xrandr outputs this:
Screen 0: minimum 8 x 8, current 3600 x 1080, maximum 16384 x 16384
DVI-I-0 connected 1920x1080+1680+0 (normal left inverted right x axis y axis) 510mm x 287mm
1920x1080 60.0*+
1680x1050 60.0
1600x1200 60.0
1440x900 59.9
1400x1050 74.8 60.0
1280x1024 75.0 60.0
1280x960 60.0
1280x800 59.8
1152x864 75.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 75.0 72.2 60.3 56.2
700x525 149.5 120.0
640x480 75.0 72.8 59.9
512x384 140.1 120.0
400x300 144.4
320x240 145.6 120.1
DVI-I-1 connected 1680x1050+0+0 (normal left inverted right x axis y axis) 474mm x 296mm
1680x1050 59.9*+ 60.0
1440x900 75.0 59.9
1400x1050 60.0
1280x1024 75.0 60.0
1280x960 60.0
1152x864 75.0
1024x768 75.0 70.1 60.0
832x624 74.6
800x600 75.0 72.2 60.3 56.2
700x525 149.5 120.0
640x480 75.0 72.8 59.9
512x384 140.1 120.0
400x300 144.4
320x240 145.6 120.1
DVI-I-2 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
DVI-I-3 disconnected (normal left inverted right x axis y axis)
My xorg.conf is:
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
Section "Files"
FontPath "/usr/share/fonts/local"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
# HorizSync source: edid, VertRefresh source: edid
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Acer G235H"
HorizSync 30.0 - 83.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce GTS 450"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-0"
Option "TwinViewOrientation" "CRT-1 LeftOf CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select, CRT-1: nvidia-auto-select"
SubSection "Display"
Depth 24
EndSubSection
EndSection
Last edited by DrKillPatient (2012-07-06 19:29:15)brebs wrote:
Maybe these help:
http://www.nvnews.net/vbulletin/showthread.php?t=184711
http://www.nvnews.net/vbulletin/showthread.php?t=184968
Thanks. The first link worked, in the sense that my games now have all those resolution options, but now there's a new bug.
To future readers: a solution has been found for this bug as well, see below.
My metamodes setting now reads:
Option "metamodes" "CRT-0: nvidia-auto-select, CRT-1: nvidia-auto-select; nvidia-auto-select {ViewPortI n=1920x1080}; nvidia-auto-select {ViewPortIn=1680x1050}; [b]nvidia-auto-select {ViewPortIn=1600x1200};[/b] nvidia-auto-sele ct {ViewPortIn=1440x900}; nvidia-auto-select {ViewPortIn=1400x1050}; nvidia-auto-select {ViewPortIn=1280x1024}; nvi dia-auto-select {ViewPortIn=1280x960}; nvidia-auto-select {ViewPortIn=1280x800}; nvidia-auto-select {ViewPortIn=115 2x864}; nvidia-auto-select {ViewPortIn=1024x768}; nvidia-auto-select {ViewPortIn=832x624}; nvidia-auto-select {View PortIn=800x600}; nvidia-auto-select {ViewPortIn=700x525}; nvidia-auto-select {ViewPortIn=640x480}; nvidia-auto-sele ct {ViewPortIn=512x384}; nvidia-auto-select {ViewPortIn=400x300}; nvidia-auto-select {ViewPortIn=320x240}
Because I now have included a resolution whose height is 1200 (or so I suppose-- if I remove that part, the issue does not occur), this happens:
Xrandr output:
Screen 0: minimum 8 x 8, current 3600 x 1200, maximum 16384 x 16384
My X screen has the right length, but the wrong height! Now, my desktop seems to span the right area (3600x1080), but if I move my mouse to the bottom of that area, it pans down another 120 pixels. In that area, there's just graphical gibberish, often whatever I had on the screen last time.
If I use Xrandr to set my screens' output, it works again, butthere a solution within the Nvidia driver settings...
EDIT: It occurs to me that the setting seems to be taking the largest possible resolution for the X screen based on those metamodes.
EDIT 2: This is likely intended behavior. The proper virtual resolution (X screen resolution) may be restored by adding
Virtual 3600 1080
to the "Display" subsection under the "Screen" section.
I'll mark this as solved.
Here's my working xorg.conf, by the way. I've posted only the "Screen" section because that's all I've changed. The rest is in my first post.
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
Option "Stereo" "0"
Option "nvidiaXineramaInfoOrder" "CRT-0"
Option "TwinViewOrientation" "CRT-1 LeftOf CRT-0"
Option "metamodes" "CRT-0: nvidia-auto-select, CRT-1: nvidia-auto-select; nvidia-auto-select {ViewPortIn=1920x1080}; nvidia-auto-select {ViewPortIn=1680x1050}; nvidia-auto-select {ViewPortIn=1600x1200}; nvidia-auto-select {ViewPortIn=1440x900}; nvidia-auto-select {ViewPortIn=1400x1050}; nvidia-auto-select {ViewPortIn=1280x1024}; nvidia-auto-select {ViewPortIn=1280x960}; nvidia-auto-select {ViewPortIn=1280x800}; nvidia-auto-select {ViewPortIn=1152x864}; nvidia-auto-select {ViewPortIn=1024x768}; nvidia-auto-select {ViewPortIn=832x624}; nvidia-auto-select {ViewPortIn=800x600}; nvidia-auto-select {ViewPortIn=700x525}; nvidia-auto-select {ViewPortIn=640x480}; nvidia-auto-select {ViewPortIn=512x384}; nvidia-auto-select {ViewPortIn=400x300}; nvidia-auto-select {ViewPortIn=320x240}"
SubSection "Display"
Virtual 3600 1080
Depth 24
EndSubSection
EndSection
Last edited by DrKillPatient (2012-07-06 19:31:18) -
[SOLVED]Terminal at Lower Resolution
Hello,
I am on Arch linux with Gnome (GDM) and I have a question-
1. When there was no Gnome. I couldn't get my resolution to be my native one. That login screen text was huge(resolution was low). Initially it was all good(when I was using nouveau), till I installed nvidia-340xx. If it makes sense. How to know if I have Optimus enabled ? (I didn't follow optimus part of the wiki and I ASSUMED I don't have optimus)My laptop is Toshiba Satellite - A665-S6070
I also did
Tips and tricks
Fixing terminal resolution
Transitioning from nouveau may cause your startup terminal to display at a lower resolution. For GRUB, see GRUB/Tips and tricks#Setting the framebuffer resolution for details.
GNU nano 2.2.6 File: /etc/X11/xorg.conf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 340.76 (buildmeister@swio-display-x86-rhel47-01) Thu Jan 22 12:12:24 PST 2015
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0"
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 75.0
VertRefresh 43.0 - 72.0
Option "PreferredMode" "1366x768"
ModeLine "1366x768" 72.33 1366 1414 1466 1526 768 770 775 790 +hsync +vsync Interlace
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
Modes "1366x768"
EndSubSection
EndSection
/var/log/Xorg.0.log -
[ 418.253]
X.Org X Server 1.17.1
Release Date: 2015-02-10
[ 418.253] X Protocol Version 11, Revision 0
[ 418.253] Build Operating System: Linux 3.18.6-1-ARCH x86_64
[ 418.253] Current Operating System: Linux Arch 3.19.2-1-ARCH #1 SMP PREEMPT Wed Mar 18 16:21:02 CET 2015 x86_64
[ 418.253] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=08402ce0-a410-4f2d-aa05-6afb4296c9e1 rw quiet
[ 418.253] Build Date: 14 March 2015 06:45:50PM
[ 418.253]
[ 418.253] Current version of pixman: 0.32.6
[ 418.253] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 418.253] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 418.253] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Mar 21 04:56:20 2015
[ 418.290] (==) Using config file: "/etc/X11/xorg.conf"
[ 418.290] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 418.333] (==) ServerLayout "Layout0"
[ 418.333] (**) |-->Screen "Screen0" (0)
[ 418.333] (**) | |-->Monitor "Monitor0"
[ 418.333] (**) | |-->Device "Device0"
[ 418.333] (**) |-->Input Device "Keyboard0"
[ 418.333] (**) |-->Input Device "Mouse0"
[ 418.333] (==) Automatically adding devices
[ 418.333] (==) Automatically enabling devices
[ 418.333] (==) Automatically adding GPU devices
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/TTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/TTF/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/OTF/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/OTF/").
[ 418.371] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 418.371] Entry deleted from font path.
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 418.371] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 418.371] Entry deleted from font path.
[ 418.371] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 418.371] (==) FontPath set to:
/usr/share/fonts/misc/
[ 418.371] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 418.371] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 418.371] (WW) Disabling Keyboard0
[ 418.371] (WW) Disabling Mouse0
[ 418.384] (II) Loader magic: 0x815d80
[ 418.384] (II) Module ABI versions:
[ 418.384] X.Org ANSI C Emulation: 0.4
[ 418.384] X.Org Video Driver: 19.0
[ 418.384] X.Org XInput driver : 21.0
[ 418.384] X.Org Server Extension : 9.0
[ 418.387] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 418.388] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 418.389] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 418.392] (--) PCI:*(0:1:0:0) 10de:0a75:1179:fd30 rev 162, Mem @ 0xd2000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00009000/128, BIOS @ 0x????????/524288
[ 418.392] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 418.392] (II) LoadModule: "glx"
[ 418.403] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 419.025] (II) Module glx: vendor="NVIDIA Corporation"
[ 419.025] compiled for 4.0.2, module version = 1.0.0
[ 419.025] Module class: X.Org Server Extension
[ 419.026] (II) NVIDIA GLX Module 340.76 Thu Jan 22 11:24:42 PST 2015
[ 419.035] (II) LoadModule: "nvidia"
[ 419.035] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 419.099] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 419.099] compiled for 4.0.2, module version = 1.0.0
[ 419.099] Module class: X.Org Video Driver
[ 419.105] (II) NVIDIA dlloader X Driver 340.76 Thu Jan 22 11:03:05 PST 2015
[ 419.105] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 419.106] (--) using VT number 2
[ 419.162] (II) Loading sub module "fb"
[ 419.162] (II) LoadModule: "fb"
[ 419.162] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 419.182] (II) Module fb: vendor="X.Org Foundation"
[ 419.182] compiled for 1.17.1, module version = 1.0.0
[ 419.182] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.182] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 419.182] (II) Loading sub module "wfb"
[ 419.182] (II) LoadModule: "wfb"
[ 419.182] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 419.184] (II) Module wfb: vendor="X.Org Foundation"
[ 419.184] compiled for 1.17.1, module version = 1.0.0
[ 419.184] ABI class: X.Org ANSI C Emulation, version 0.4
[ 419.184] (II) Loading sub module "ramdac"
[ 419.184] (II) LoadModule: "ramdac"
[ 419.184] (II) Module "ramdac" already built-in
[ 419.195] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 419.195] (==) NVIDIA(0): RGB weight 888
[ 419.195] (==) NVIDIA(0): Default visual is TrueColor
[ 419.195] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 419.196] (**) NVIDIA(0): Enabling 2D acceleration
[ 420.273] (II) NVIDIA(0): Display (Seiko/Epson (DFP-0)) does not support NVIDIA 3D
[ 420.274] (II) NVIDIA(0): Vision stereo.
[ 420.274] (II) NVIDIA(GPU-0): Found DRM driver nvidia-drm (20150116)
[ 420.292] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:1:0:0 (GPU-0)
[ 420.292] (--) NVIDIA(0): Memory: 524288 kBytes
[ 420.292] (--) NVIDIA(0): VideoBIOS: 70.18.5f.00.12
[ 420.292] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 420.297] (--) NVIDIA(0): Valid display device(s) on GeForce 310M at PCI:1:0:0
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) (boot, connected)
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): CRT-0 Name Aliases:
[ 420.297] (--) NVIDIA(0): CRT
[ 420.297] (--) NVIDIA(0): CRT-0
[ 420.297] (--) NVIDIA(0): DPY-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(0): VGA-0
[ 420.297] (--) NVIDIA(GPU-0): CRT-0: 400.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for CRT-0 ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0): Internal LVDS
[ 420.297] (--) NVIDIA(0): Seiko/Epson (DFP-0) Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-0
[ 420.297] (--) NVIDIA(0): DPY-1
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(0): DPY-EDID-f0d8f39c-e735-531b-2696-7b835139c44d
[ 420.297] (--) NVIDIA(0): LVDS-0
[ 420.297] (--) NVIDIA(GPU-0): Seiko/Epson (DFP-0): 330.0 MHz maximum pixel clock
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0): EDID Version : 1.3
[ 420.297] (--) NVIDIA(GPU-0): Manufacturer : SEC
[ 420.297] (--) NVIDIA(GPU-0): Monitor Name : Seiko/Epson
[ 420.297] (--) NVIDIA(GPU-0): Product ID : 0x3641
[ 420.297] (--) NVIDIA(GPU-0): 32-bit Serial Number : 0x00000000
[ 420.297] (--) NVIDIA(GPU-0): Serial Number String :
[ 420.297] (--) NVIDIA(GPU-0): Manufacture Date : 2009, week 0
[ 420.297] (--) NVIDIA(GPU-0): DPMS Capabilities :
[ 420.297] (--) NVIDIA(GPU-0): Input Type : Digital
[ 420.297] (--) NVIDIA(GPU-0): Prefer first detailed timing : Yes
[ 420.297] (--) NVIDIA(GPU-0): Supports GTF : No
[ 420.297] (--) NVIDIA(GPU-0): Maximum Image Size : 350 mm x 200 mm
[ 420.297] (--) NVIDIA(GPU-0): Valid HSync Range : 47.4 kHz - 47.4 kHz
[ 420.297] (--) NVIDIA(GPU-0): Valid VRefresh Range : 60.0 Hz - 60.0 Hz
[ 420.297] (--) NVIDIA(GPU-0): EDID maximum pixel clock : 72.3 MHz
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Detailed Timings:
[ 420.297] (--) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.297] (--) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.297] (--) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.297] (--) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.297] (--) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.297] (--) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.297] (--) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.297] (--) NVIDIA(GPU-0): Image Size : 353 mm x 198 mm
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): Raw EDID bytes:
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): 00 ff ff ff ff ff ff 00 4c a3 41 36 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 13 01 03 80 23 14 78 0a 87 f5 94 57 4f 8c 27
[ 420.297] (--) NVIDIA(GPU-0): 27 50 54 00 00 00 01 01 01 01 01 01 01 01 01 01
[ 420.297] (--) NVIDIA(GPU-0): 01 01 01 01 01 01 41 1c 56 a0 50 00 16 30 30 20
[ 420.297] (--) NVIDIA(GPU-0): 25 00 61 c6 10 00 00 19 00 00 00 0f 00 00 00 00
[ 420.297] (--) NVIDIA(GPU-0): 00 00 00 00 00 23 5c 02 67 00 00 00 00 fe 00 53
[ 420.297] (--) NVIDIA(GPU-0): 41 4d 53 55 4e 47 0a 20 20 20 20 20 00 00 00 fe
[ 420.297] (--) NVIDIA(GPU-0): 00 31 36 30 41 54 30 36 2d 55 30 31 0a 20 00 04
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(GPU-0): --- End of EDID for Seiko/Epson (DFP-0) ---
[ 420.297] (--) NVIDIA(GPU-0):
[ 420.297] (--) NVIDIA(0): DFP-1: Internal TMDS
[ 420.297] (--) NVIDIA(0): DFP-1 Name Aliases:
[ 420.297] (--) NVIDIA(0): DFP
[ 420.297] (--) NVIDIA(0): DFP-1
[ 420.297] (--) NVIDIA(0): DPY-2
[ 420.297] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(0): HDMI-0
[ 420.298] (--) NVIDIA(GPU-0): DFP-1: 165.0 MHz maximum pixel clock
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): No EDID Available.
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (--) NVIDIA(GPU-0): --- End of EDID for DFP-1 ---
[ 420.298] (--) NVIDIA(GPU-0):
[ 420.298] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 420.298] (**) NVIDIA(0): device Seiko/Epson (DFP-0) (Using EDID frequencies has
[ 420.298] (**) NVIDIA(0): been enabled on all display devices.)
[ 420.298] (II) NVIDIA(0): Frequency information for Seiko/Epson (DFP-0):
[ 420.298] (II) NVIDIA(0): HorizSync : 30.000-75.000 kHz
[ 420.298] (II) NVIDIA(0): VertRefresh : 59.998 Hz
[ 420.298] (II) NVIDIA(0): (HorizSync from EDID)
[ 420.298] (II) NVIDIA(0): (VertRefresh from EDID)
[ 420.298] (II) NVIDIA(GPU-0):
[ 420.298] (II) NVIDIA(GPU-0): --- Building ModePool for Seiko/Epson (DFP-0) ---
[ 420.298] (II) NVIDIA(GPU-0): Validating Mode "1366x768":
[ 420.298] (II) NVIDIA(GPU-0): 1366 x 768 @ 60 Hz
[ 420.298] (II) NVIDIA(GPU-0): Mode Source: EDID
[ 420.298] (II) NVIDIA(GPU-0): Pixel Clock : 72.33 MHz
[ 420.298] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1366, 1414
[ 420.298] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1446, 1526
[ 420.298] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 770
[ 420.298] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 775, 790
[ 420.298] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (II) NVIDIA(GPU-0): Viewport 1366x768+0+0
[ 420.299] (II) NVIDIA(GPU-0): Horizontal Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Vertical Taps 0
[ 420.299] (II) NVIDIA(GPU-0): Base SuperSample x4
[ 420.299] (II) NVIDIA(GPU-0): Base Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Distributed Rendering 1
[ 420.299] (II) NVIDIA(GPU-0): Overlay Depth 32
[ 420.299] (II) NVIDIA(GPU-0): Mode is valid.
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.299] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.299] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.299] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.299] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.299] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.299] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.299] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.299] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.299] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.299] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.299] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.299] (WW) NVIDIA(GPU-0): allowed).
[ 420.299] (II) NVIDIA(GPU-0):
[ 420.299] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.300] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.300] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.300] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.300] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.300] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.300] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.300] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.300] (WW) NVIDIA(GPU-0): allowed).
[ 420.300] (II) NVIDIA(GPU-0):
[ 420.300] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.300] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.300] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.300] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.300] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (II) NVIDIA(GPU-0): Extra : Interlace
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 60 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 65.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1344
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 70 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 75.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1048
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1184, 1328
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 771
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 777, 806
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 78.75 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1040
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1136, 1312
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 800
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.301] (II) NVIDIA(GPU-0): 1024 x 768 @ 85 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 94.50 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1072
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1168, 1376
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 769
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 772, 808
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.301] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.301] (WW) NVIDIA(GPU-0): allowed).
[ 420.301] (II) NVIDIA(GPU-0):
[ 420.301] (II) NVIDIA(GPU-0): Validating Mode "1152x864":
[ 420.301] (II) NVIDIA(GPU-0): 1152 x 864 @ 75 Hz
[ 420.301] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.301] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.301] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1152, 1216
[ 420.301] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1344, 1600
[ 420.301] (II) NVIDIA(GPU-0): VRes, VSyncStart : 864, 865
[ 420.301] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 868, 900
[ 420.301] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.301] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1376
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1488, 1800
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1000
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x960":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 960 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 148.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 960, 961
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 964, 1011
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 108.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1328
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 75 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 135.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1296
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1440, 1688
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1066
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1280x1024":
[ 420.302] (II) NVIDIA(GPU-0): 1280 x 1024 @ 85 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 157.50 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1280, 1344
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1504, 1728
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1024, 1025
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1028, 1072
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 60 Hz
[ 420.302] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.302] (II) NVIDIA(GPU-0): Pixel Clock : 162.00 MHz
[ 420.302] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.302] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.302] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.302] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.302] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.302] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.302] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.302] (WW) NVIDIA(GPU-0): allowed).
[ 420.302] (II) NVIDIA(GPU-0):
[ 420.302] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.302] (II) NVIDIA(GPU-0): 1600 x 1200 @ 65 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 175.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 70 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 189.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 202.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1600x1200":
[ 420.303] (II) NVIDIA(GPU-0): 1600 x 1200 @ 85 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 229.50 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1600, 1664
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1856, 2160
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1200, 1201
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1204, 1250
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 204.80 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1920
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2120, 2448
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1394
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1792x1344":
[ 420.303] (II) NVIDIA(GPU-0): 1792 x 1344 @ 75 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 261.00 MHz
[ 420.303] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1792, 1888
[ 420.303] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2104, 2456
[ 420.303] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1344, 1345
[ 420.303] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1348, 1417
[ 420.303] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.303] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.303] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.303] (WW) NVIDIA(GPU-0): allowed).
[ 420.303] (II) NVIDIA(GPU-0):
[ 420.303] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.303] (II) NVIDIA(GPU-0): 1856 x 1392 @ 60 Hz
[ 420.303] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.303] (II) NVIDIA(GPU-0): Pixel Clock : 218.30 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1952
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2176, 2528
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1439
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1856x1392":
[ 420.304] (II) NVIDIA(GPU-0): 1856 x 1392 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 288.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1856, 1984
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2208, 2560
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1392, 1393
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1396, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 60 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 234.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2048
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2256, 2600
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "1920x1440":
[ 420.304] (II) NVIDIA(GPU-0): 1920 x 1440 @ 75 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: VESA
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 297.00 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1920, 2064
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 2288, 2640
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 1440, 1441
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 1444, 1500
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x350":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 350 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 350, 382
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 385, 445
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "320x175":
[ 420.304] (II) NVIDIA(GPU-0): 320 x 175 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 175, 191
[ 420.304] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 192, 222
[ 420.304] (II) NVIDIA(GPU-0): H/V Polarity : +/-
[ 420.304] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.304] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.304] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.304] (WW) NVIDIA(GPU-0): allowed).
[ 420.304] (II) NVIDIA(GPU-0):
[ 420.304] (II) NVIDIA(GPU-0): Validating Mode "640x400":
[ 420.304] (II) NVIDIA(GPU-0): 640 x 400 @ 85 Hz
[ 420.304] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.304] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.304] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 672
[ 420.304] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 736, 832
[ 420.304] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 445
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x200":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 336
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 368, 416
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 222
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "720x400":
[ 420.305] (II) NVIDIA(GPU-0): 720 x 400 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 35.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 720, 756
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 828, 936
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 400, 401
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 404, 446
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "360x200":
[ 420.305] (II) NVIDIA(GPU-0): 360 x 200 @ 85 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 17.75 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 360, 378
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 414, 468
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 200, 200
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 202, 223
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/+
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 25.17 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 800
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 490
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 525
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.305] (II) NVIDIA(GPU-0): 320 x 240 @ 60 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 12.59 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 400
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 245
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 262
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.305] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.305] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.305] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.305] (WW) NVIDIA(GPU-0): allowed).
[ 420.305] (II) NVIDIA(GPU-0):
[ 420.305] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.305] (II) NVIDIA(GPU-0): 640 x 480 @ 73 Hz
[ 420.305] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.305] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.305] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 664
[ 420.305] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 704, 832
[ 420.305] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 489
[ 420.305] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 492, 520
[ 420.305] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 73 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 332
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 352, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 244
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 246, 260
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 31.50 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 656
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 720, 840
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 500
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 75 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 15.75 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 328
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 360, 420
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 250
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "640x480":
[ 420.306] (II) NVIDIA(GPU-0): 640 x 480 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 640, 696
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 752, 832
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 480, 481
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 484, 509
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "320x240":
[ 420.306] (II) NVIDIA(GPU-0): 320 x 240 @ 85 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 320, 348
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 376, 416
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 240, 240
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 242, 254
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : -/-
[ 420.306] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.306] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.306] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.306] (WW) NVIDIA(GPU-0): allowed).
[ 420.306] (II) NVIDIA(GPU-0):
[ 420.306] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.306] (II) NVIDIA(GPU-0): 800 x 600 @ 56 Hz
[ 420.306] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.306] (II) NVIDIA(GPU-0): Pixel Clock : 36.00 MHz
[ 420.306] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 824
[ 420.306] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1024
[ 420.306] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.306] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 603, 625
[ 420.306] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 56 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 18.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 412
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 512
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 301, 312
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 40.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 840
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 968, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 605, 628
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 60 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 20.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 420
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 484, 528
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 314
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 50.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 856
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 976, 1040
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 637
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 643, 666
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.307] (II) NVIDIA(GPU-0): 400 x 300 @ 72 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 25.00 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 428
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 488, 520
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 318
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 321, 333
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.307] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.307] (WW) NVIDIA(GPU-0): allowed).
[ 420.307] (II) NVIDIA(GPU-0):
[ 420.307] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.307] (II) NVIDIA(GPU-0): 800 x 600 @ 75 Hz
[ 420.307] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.307] (II) NVIDIA(GPU-0): Pixel Clock : 49.50 MHz
[ 420.307] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 816
[ 420.307] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1056
[ 420.307] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.307] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 625
[ 420.307] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.307] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 75 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 24.75 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 408
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 528
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 312
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "800x600":
[ 420.308] (II) NVIDIA(GPU-0): 800 x 600 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 56.30 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 800, 832
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 896, 1048
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 600, 601
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 604, 631
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "400x300":
[ 420.308] (II) NVIDIA(GPU-0): 400 x 300 @ 85 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 28.15 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 400, 416
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 448, 524
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 300, 300
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 302, 315
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) NVIDIA(GPU-0): Extra : DoubleScan
[ 420.308] (WW) NVIDIA(GPU-0): Mode is rejected: Only EDID-provided modes are allowed on
[ 420.308] (WW) NVIDIA(GPU-0): Seiko/Epson (DFP-0) (continuous frequency modes not
[ 420.308] (WW) NVIDIA(GPU-0): allowed).
[ 420.308] (II) NVIDIA(GPU-0):
[ 420.308] (II) NVIDIA(GPU-0): Validating Mode "1024x768":
[ 420.308] (II) NVIDIA(GPU-0): 1024 x 768 @ 87 Hz
[ 420.308] (II) NVIDIA(GPU-0): Mode Source: X Server
[ 420.308] (II) NVIDIA(GPU-0): Pixel Clock : 44.90 MHz
[ 420.308] (II) NVIDIA(GPU-0): HRes, HSyncStart : 1024, 1032
[ 420.308] (II) NVIDIA(GPU-0): HSyncEnd, HTotal : 1208, 1264
[ 420.308] (II) NVIDIA(GPU-0): VRes, VSyncStart : 768, 768
[ 420.308] (II) NVIDIA(GPU-0): VSyncEnd, VTotal : 776, 817
[ 420.308] (II) NVIDIA(GPU-0): H/V Polarity : +/+
[ 420.308] (II) Nkarol wrote:
newguy wrote:These commands give no such file or directory
Did you install uvesafb?
Install v86d from AUR
This was my first time installing from AUR so I think I installed it, "pacman -Q v86d" gives me output "v86d 0.1.10-5".
Prepare the system
Remove any framebuffer-related kernel boot parameter from the bootloader configuration to disable the old vesafb framebuffer from loading.
$ grep vga /proc/cmdline
$ grep -ir vga /etc/modprobe.d/
Should return no results. If you do have a vga= option somewhere, you will need to remove it.
It didn't
GRUB
Note: This might not work.
First edit /etc/default/grub commenting the GRUB_GFXPAYLOAD_LINUX=keep line.
Then regenerate grub.cfg via the standard script:
# grub-mkconfig -o /boot/grub/grub.cfg
Did this
Then I also configured the file /usr/lib/modprobe.d/uvesafb.conf: (It wasn't empty) , so yeah. I think I installed it.Is there any other way to check ?
Last edited by newguy (2015-03-21 10:21:29) -
Satellite P500 - Splinter Cell is very slow - low resolution
Hey guys,
I have a Toshiba Satellite P500.
CPU Intel Core2 Quad processor Q9000 (2.0GHz, 1066MHz FSB, 6MB L2 Cache)
Operating System Genuine Windows Vista Home Premium 32bit (includes recovery partition for Windows Vista Home Premium 64bit)
Screen Size 18.4" Widescreen HD+ TruBrite Display (1680 x 945), supports 720p
Memory 4GB DDR2 (2GB + 2GB) (800MHz) expandable to 8GB
Storage 1000GB (500GB + 500GB) (5400rpm) SATA
Graphics ATI Mobility Radeon HD 4650 (2286MB Total: 1GB discrete memory + 1262MB shared memory with ATI HyperMemory technology)
Optical Disc Drive DVD SuperMulti Double/Dual Layer
Now im trying to play games like, Splinter Cell Convictions and things of that sort, apparently, according to the Games website, i meet all the recommended specs. Yet when i play the game its on a very low resolution and all settings set to LOW!
Is anyone else having these problems with there Notebooks?Hi Sammole,
Sine few days I have Satellite P500 too. I have to say its a very great notebook, I love it. The screen is really good and big and in my opinion the best option for games, videos and all other multimedia stuff. Furthermore its equipped with fast CPU and graphic card, ideal for playing games.
All my games running fine so I dont know what happened to you. Make sure that the eco mode isnt active, this will slow down the performance.
Make also sure that newest display driver from Toshiba is installed and latest DirectX version from Microsoft.
Have also a look Splinter Cell homepage. Maybe there is an update (patch) available that can help you. :) -
Why does low resolution warning show when I used a high resolution camera
Hi,
I am just learning about iphoto, and have been uploading photos I took with a 4 mega-pixel camera. I have printed out photos at Kodak printers directly from the camera, and they came out great. However, when I upload the photos to the Mac, then burn them to a CD, and try to print them they come out blurry and have the low resolution warning. Does anyone know why that is happening? Is there a setting that decides the photo quality when pictures are uploaded?
Are the photos I have now "doomed" to be at low resolution?
ThanksThe "share" function actually places a mini-library on the CD so that it can be loaded into another Mac that has iPhoto. Just like in your library, the CD will contain, for each photo, the original "out of the camera" version AND the most recently modified version AND a thumbnail for viewing within iPhoto. Apparently the thumbnail was the one that was inadvertently selected for printing and, of course, the resolution is minimal.
If you want to burn a CD for use on a PC or to give to your favorite photo-finisher, create a folder on the desktop and "File/Export" the contents of the album to that folder. Then, EXIT iPhoto and burn the CD with the contents of the desktop folder. After checking the CD and confirming that all is OK, you can trash that folder. -
Hi there,
I have an MSI GeForce FX5700LE 256mb. Everything works fine, however, when I try to change the resolution in a game the screen does not change. For instance, in Soldier of Fortune II I have the resolution set to 1152x864. When I start the game the initial screen (black with "loading...") comes up in the said res, but when it goes to the next loading screen it jumps to the 800x600 resolution. I can minimize the game and it will be the resolution I set in the game on my desktop. So the setting is in affect, but the game is not playing in that res.
I also tested this on StarWars Battlefront this morning and the same thing. I changed the resolution from 1024x768 to 1152x864 and nothing changed. I restarted the game, the setting still says 1152x864, but the res of the game stayed the same as before changing.
Is this a problem with the card or a setting I am missing? My desktop is set to 1152x864 and runs perfectly. The games run fine in the lower resolution, however, my card should support higher res in game.
Some Spec:
WinXP Pro SP1
DirectX 9.0c
ViewSonic VP2000s
P4 3.0GHz
1g pc2100
MSI PT880 Neo-SR
I have the latest NVIDIA and ViewSonic drivers installed. I hope this is enough info. Thanks in advance for your help!
-MapexThank you for the reply...
I have the latest NVIDIA drivers: ver. 66.93...downloaded and installed a few days ago.
I have had this issue since I put together this pc 6 months ago. Since the games run in the other resolution, I figured it was no big deal. However, I then thought better to find out the problem now before the warranty is gone on the graphics card.
Thanks again for your help!
-Mapex -
Low resolution on retina display
It seems that adobe muse opens in low resolution on retina display. I used to have the same problem with adobe acrobat, but in that case i solved the problem by following the procedure in: http://forums.adobe.com/thread/1298242. That procedure, however, doesn't work with muse. Can somebody help me?
Hi,
Is there a fix for this?
The UI is tiny on my Dell XPS 15 (retina display).
Is there no option such as in photoshop for 'experimental features' to enlarge the UI by 200%?
Currently it's unusable on a retina display.
Thanks. -
ID CS6 shows low resolution on placed AI file.
I placed an AI, full vector, file into ID. Didn't see any problems until I ran preflight and it popped up with a low resolution warning. The vector is scaled down inside ID, but still shows a 90 ppi. I couldn't find any placed images in the AI file, which is a very busy kid's logo (below). I tried googling the situation but haven't found any solutions. Anyone know what's going on or how to fix this?
Solved this problem. It seems like some of the gradients are actually embedded images. Why someone would do that is beyond me. Now to just replace all the images with actual gradient.
-
All text in Preview is low resolution and Times italics is twisted
I have two issues that may be related.
All text from PDF documents in Preview (version 3.0.8) appears in very low resolution, reminiscent of the days of 72-dpi jaggy fonts.
Italics in Times prints out in a bizarre twisted fashion.
The affected system is a early-model G4 first with OS 10.4.7 and then 10.4.8.
Regarding the Preview problem, bitmapped images don't appear to be affected. Printout is not affected. Acrobat is not affected. A screenshot of Preview's output is at http://www.fluxsoft.com/images/previewlowres.jpg.
What's displayed there is a good rendition of the output on 23-inch Apple Cinema display.
A screenshot of Times in plain and the twisted italics is at
http://www.fluxsoft.com/images/twisted_italics.jpg
The following steps were taken:
A full Onyx 1.7.4 cleaning, which includes the deleting font caches.
FontBook was run to resolved duplicate fonts and to verfiy all fonts.
The system was upgraded to 10.4.8 from 10.4.7.
Power Mac G4 Mac OS X (10.4.8)
Power Mac G5I figured it out by myself.
Somehow, really do not know how!, *FontExplorer X pro* deactivated a couple of SYSTEM FONTS such as Arial, Verdana, and others. This caused not only Safari but many other applications to behave in a weird way in terms of the fonts. Just activated back the fonts and problem solve.
Now, as I said before, +how in da' **** those fonts got de-activated?!+ -
GT60 3K IPS black borders around the screen on lower resolutions
I've got an MSI GT60 with 3K IPS display and GF880M and although it's a very powerful machine it sometimes isn't fast enough to play the games with the native resolution on high details, therefore in several games I wanted to lower the resolution to get a better experience. However this is where I have a problem, because if I change the resolution in-game what usually happens (80% of the games I've tried) is the screen is getting smaller and I have back borders around it. This is kind of frustrating and I wanted to ask if you know any way of sorting out this issue. I'd like to be able to play a game at 1080P for example but have it stretched to the whole screen.
Some of the games I've observed this behaviour:
1. L.A. Noire
2. Assassin's Creed: Black Flag
3. Far Cry 3
4. Max Payne 3
I've tried lowering the Windows resolution prior to opening the game but it makes no difference. I've also looked at the nVidia Control Panel because some of the versions of the drivers had the option to stretch lower resolution to full screen but in the latest one I couldn't find it.
As the result of this I'm feeling a little frustrated that although the notebook itself is one of the most powerful ones available on the market I cannot play it the way I wanted and I begin to think paying extra for the 3K display was a mistake a I should've gone with the 1080P version. But I hope there's a fix for this issue.I've found a workaround but it's very annoying as I have to apply it everytime I launch a game (or if I accidently alt-tab back to windows desktop).
1. Run the game and let it launch with the back borders
2. Ctrl+Alt+Del and go to desktop (don't Alt-Tab, it won't work)
3. Open Intel Graphics properties, change the resolution to 3k, apply changes, than change it back to 1080P or whichever you like and mark the Desktop Stretching option. Apply changes.
4. Back to the game and the black borders should now be gone.
It's a workaround, not a solution. I'd really like that MSI, nVidia or whoever is responsible for this behavior find a permament fix. -
Automatic upsampling of low-resolution images?
I posted about this, it might have been about a year ago now, and got no joy, so I thought I'd try again in case something new has appeared.
When exporting to PDF, InDesign CS can downsample images. Some of my images, however, maybe 20-30 at a guess, I need to upsample. In the next month or so I hope to export to PDF, and I dread the thought of having to go through the several hundred images in my book, find those images that are under-resolution, open them in PS, and do some calculations to work out the resolution to which they should be resampled to achieve 300 dpi in the InDesign document... whoa, I'm worn out just thinking about it.
Also on my wish list: I have a hundred or so images that cross the centre-spread boundary. Before I impose the document, I will have to go through it and Copy and Paste-in-Place each image, and then resize the boundary to the centre for both images so that when imposed, some of the image is on one page and some on the other (thanks Buko, for that hint from a few years ago). Not a great problem, but still... can this process be automated?
Bring joy to my heart, someone please, and tell me at least one of these chores is automatable.ROBERT LEVINE: "Never saw that happen". You can see it happen, and I explain how to make it happen, in my downloadable zip file.
ROB DAY: Thanks for the feedback. The sample I generated (not a typical photo I work with; I choose it because it did not have any inherent imperfections) is an accurate reflection of how I use some of my images. i.e I start with a low resolution original and it is scaled in InDesign. I do not have the option of getting a better original. Most of the images I have are 2 x 3 Box Brownies from pre 1960, obtained by me driving from Tasmania to North Queensland (3000 km) each year for four years and scanning an elderly stranger's photos on their lounge room floor. In the two-three hours I was with them I had to get their life story, look at their photos, choose the interesting ones, write down the details, and then scan them. It's a challenge to do all that, day after day, 6-8 people a week, for three months at a time. Given 10-50 photos to scan, which at high resolution take three minutes each on my scanner, sometimes they couldn't all be scanned in high resolution in the time I had available. The most likely prospects for the book I did scan at high resolution, the others got the 300 or 600 dpi treatment (this is for a 2 inch wide image, remember). Three years later, when I started putting the book together, I choose to use some of the low scan originals, greatly enlarged, because they were important photos that I didn't realize at the time of scanning.
So, I'm stuck with some low-resolution scans and I want to make them look their best. Upscaling does that, doesn't it? And your example proves it.The choice between the middle and right photo is easy: the one on the right. i.e the upscaled unpixelated one. And I wasn't the judge: I let my partner decide (it's her niece in the photo). It's a game man who would argue with my partner.
Further, the image on the left, your reference and which is quite acceptable, is of course taken from my 300 dpi PDF -- itself an upscaled version of a 30 dpi image. So the reference you choose again proves that upscaling works. i.e it removes pixelation and is beneficial.
Please everyone - this is not about using a low resolution image because I'm too lazy to rescan the original. In most cases the originals are now scattered among children and grandchildren of the person I spoke with because they have passed away. Plus, if I did locate the photos, they are 3000 km away. I have some low resolution images and I want to improve them. Upscaling does that, InDesign can't, and I think it should.
MORE ON David's remarks: Excellent tutorial, David. Pity I wasted 20 minutes to unnecessarily generate mine.
I'd like to know the reasons why InDesign doesn't simply offer a 'Resample' option instead of only 'Downsample'. If a particular printer requires 300 dpi images for best quality, InDesign should accommodate that by allowing a user to resample every image to 300 dpi. I reckon the programers never gave thought to the idea that someone might be using low-resolution images in a flash piece of software.
This thread has gone a bit astray. Buko has given an indirect answer (to do what I thought I would have to do) -- use Photoshop. Can I take it that no version of InDesign, or any add on, allows for automatic upsampling?
InDesign has the ability to resample, and I bet it uses the same algorithms as Photoshop which can resample both ways. InDesign can resample downwards; it is unfortunate that it wasn't given the capability to resample upwards. -
The problem that app icons have a low resolution in Launchpad Screen
Here is a screenshot.
In Macbook pro with retina display, app icon often have a low resolution in Launchpad screen.
If the app install again after restarting the mac, the app icon in launchpad screen has normal resolution.
Do anyone know how to resove this problem?Had this problem from time to time, at random, with Lion. After Mountain Lion it is a lot worse... many icons, non only personalized but also system icons, look blurry and pixelated...
I have done EVERYTHING I read on the many threads about this issue here at apple, as well as on other sites, but nothing helped... (removed thumbnails.data, delete caches, deleter .DS_store files, finder preferences, etc. etc. etc.).
This happens on both my macs, an iMac 2011 and a MacBookPro 2010...
How is it possible to have this BUG since the last 3 version of the OS, with Apple not solving the problem but rather getting worse? -
Printing picture in low resolution
I want to print Logo in Label Printer. But it is printing in low resolution.
The dimensions of the Picture are 1,5 cm x 1,5 cm.
When I insert the picture (dimensions 317 pixels x 292 pixels) in CR , I change Xscaling and Yscaling.
When I printing CR, the picture is printing in resolution 62 pixels x 57 pixels.
I want to print Logo in high resolution.
Help me, please.My version is Crystal Reports for Visual Studio 2003 .NET service pack 1
Thank you very much, but in this version not exists this Check.¿?
I have installed Crystal Reports 2008 (Trial versión), have open proyect VS and have printing picture in high resolution.
I have installed Hotfix CR and all updates Visual Studio 2003 .NET
I do not believe that it is necessary to change the version to solve this problem.
Regards,
David
Edited by: Navarro, David on Feb 11, 2010 11:51 AM -
Images dragged out of trash have low resolution
Some Aperture images ended up in system, not Aperture, trash. Found them there and dragged them out only to find they have very low resolution now. Can't find a way to restore their original resolution. The "Masters" seem to have the same low resolution. For reference, the originals were over 24 mbs and the ones out of the trash were reduced to around 500 kbs.
Whoops on the "solved" issue. My thinking was that the answer was that I deleted incorrectly, thus solving the mystery. Recovering the info via backup was then something else...if that makes sense. I hope nobody is turned off by the "Solved" notation. I know I look at those especially because they are solved whereas many other discussions just sort of fade away without a definite conclusion.
To answer your questions:
1. I used the delete commands, like "delete version", "delete masters and all versions".
2. OS 10.6.8
3. The library is on the computer's HD, but I have Time Machine and another external drive for the Vault feature.
4. I have 5100 images, cannot locate where the actual size is and in any case would not know the "before" size to compare it with to see if the Masters went away or just hid.
5. I have all the files I dragged out, haven't emptied the trash or deleted anything since I had this problem.
6. The folders have various names I gave them or which were generated by the program, I guess, and none of them are labelled "masters". I have searched thru all folders and projects, and thru the photos and have not found the masters in question. I never generated a seperate "Masters" folder. Sounds like a good idea though.
7. I originally migrated over from iPhoto, a messy process for me, but that was long ago. Since then I have only imported via cameras and never had a problem with that. The images in question, the 24mb ones, are from the newly supported raw files from a Sony Nex-7 and no problems with those images in general. Just a handful of them got lost. Most are just fine, so there is no pattern there.
At some point, perhaps when Ap4 comes out, I would like to find a way to start completely over!
I'll do the backup restoration thing when you advise me to go ahead, and again would appreciate any advice on the best way to do that. Never did it before. Thanks again, Carl -
Preventing importing of low resolution images?
I'm in process of moving a bucketload of images into a Lightroom library from various sources in the drives of the Macs at gome, and am having problem with Lightroom importing a bunch of low resolution images into the library. These files include various web exports and iPhoto library thumbnails etc. Now, this wouldn't be a problem, except:
1) I have no control over the "Don't import suspected duplicates" feature, so I don't know of Lightroom is importing a thumbnail version of a shot (with EXIF) or the original. I suspect is importing both, but can't be sure, and the import report is just too tedious to go through, as the total size of the import includes over 100k exposures.
2) Lightroom doesn't have a feature that'd let me search for scaled down images. I can't search by resolution, and the scaling flag search doesn't pick up images scaled outside Lightroom. I could throw away some shots with no EXIF data but exports with EXIF information retained cannot be thrown away from the lib.
Anyone here have ideas on how to solve this? A solution that causes Lightroom to ignore files that aren't of the size that's the same as a the camera original, or one that lets me search for resized images from a library would both suffice.dorin_nicolaescu wrote:
If you are going to judge whether to import or not by file size alone, an easy solution would be to:
Use Windows Explorer (or Mac search) to search you Pictures folder (and subfolders) for files smaller than, say, 300 Kb.
Delete them or move to another folder.
Import the clean folder into Lightroom.
Heh, I guess you missed a detail in my post. I'm importing more than 100.000 exposures contained in a few thousands of folders. The total size of the library that's been imported right now is about 650 GB. If I can't automate this, I can't do it.
I shuffled through the Lightroom plugin API doc and seems I can't create a plugin that'd automate this either, as there's no call to initialize the value from the plugin itself - had an idea to provide a searchable width/height metadata plugin myself but apparently that's a no go.
Maybe you are looking for
-
Yoga tablet 2 pro microphone does not work with Skype or Google+ hangout
I have a new yoga tablet 2 pro, with most recent build and most recent version of skype for android. When using skype or hangout, the other party cannot hear me (unless I speak directly into built-in microphone hole from a few inches away). The mike
-
My old computer, which had CS3 installed, crashed and I had to replace the computer. We re-installed the CS3 program on the new computer, and the prompt calls for a serial number, which we do not have. I obtained the original CS3 while registered a
-
Report showing QTy shipped form particular sloc
Hi , Is there any report which generates a list with items as followes: -Company -SLOC ; -SLOC Short name -SLOC Adress -Shipped Qty since Apr 2008 from the SLOC. please help. Reagrds chetan
-
Why can I not see any installed plugins?
I have Elements 11 for Mac and have downloaded and installed demo plugins of AnarchistSuite and Texture anarchy (http://www.digitalanarchy.com/texture/tutes.html) and also several plugins from here (http://www.richardrosenman.com/software/downloads/)
-
On System Administrator > Application > Menu I can update a menu attached to a responsibility. On saving, the "Compile Security Menu" concurrent request runs. When I log in again and view the responsibility whose menu I updated, often the change is n