[SOLVED] /media permission denied
$sudo mount /dev/sda1 /media
mount: warning: /media seems to be mounted read-only.
$ groups
lp wheel games network video audio optical storage power howard
trying to mount my music hard drive in /media for audacious. it's ntfs and ide if that makes a difference. gives me permission denied pop-up in thunar and in audacious.
not sure where to start exactly.
Last edited by howard (2011-10-20 00:31:58)
jasonwryan wrote:
howard wrote:it's ntfs and ide if that makes a difference
Yes: it does https://wiki.archlinux.org/index.php/Ntfs
Yep!
$sudo ntfs-3g /dev/sda1 /media
Thanks a lot, jason.
Similar Messages
-
[SOLVED]ObConf Permission Denied
Hey Guys i am having some trouble to install some openbox themes using obconf, the error is this:
Unable to extract the file "/home/raamon/Downloads/Murrine-Unity-20110222.obt".
Please ensure that "/home/raamon/.themes" is writable and that the file is a valid Openbox theme archive.
The following errors were reported:
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3: Cannot mkdir: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/iconify.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/shade.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/desk_toggled.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/max_toggled.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/bullet.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/desk.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/shade_toggled.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/max.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/close.xbm: Cannot open: No such file or directory
tar: Murrine-Unity: Cannot mkdir: Permission denied
tar: Murrine-Unity/openbox-3/themerc: Cannot open: No such file or directory
tar: Exiting with failure status due to previous errors
I tried to move the themes to the ~/.themes and then install by obconf but didn't worked too.
Solved...
Last edited by Arcken (2011-08-08 03:17:19)Can you please explain how it was solved?
-
[SOLVED]bash: Permission denied
Hi!
After yesterdays update (pacman -Syu) i can't seem to run scripts or execute commands like
./configure
here is me trying to compile xbmc.
==> Bootstraping XBMC
/home/*****/build/xbmc-pvr-svn/PKGBUILD: ./bootstrap: /bin/sh: felaktig tolk: Åtkomst nekas <--(Permission denied)
==> Configuring XBMC
/home/*****/build/xbmc-pvr-svn/PKGBUILD: ./configure: /bin/sh: felaktig tolk: Åtkomst nekas <--(Permission denied)
==> FEL: Build misslyckades <--(build failed)
Avbryter...
sorry my locale is Swedish.
here is me trying to run script that starts vdr.
./startvdr
bash: ./startvdr: Permission denied
What caused the problem was, my external drives is not auto mounted in Gnome so i used this udev rule
http://wiki.archlinux.org/index.php/Ude … _it_exists
which by the ways works great, after i deleted the udev rule file and rebooted everything is back to normal.
Last edited by decaturguy (2009-12-23 23:26:34)ZaQ wrote:
Hi,
Maybe the permissions and/or the owner/group changed?
Therefore, you could post:
ls -l /PATH/startvdr
nothing wrong with the permissions:
-rwxr-xr-x 1 myusername users 180 23 feb 2009 startvdr
i can run my scripts like this: bash ./startvdr
but, bash ./configure is no go it get stuck.
configure: WARNING: unrecognized options: --enable-external-libmad, --enable-external-libfaad, --enable-external-libvorbis, --enable-external-libmpcdec, --enable-external-libflac
configure: Ensuring config.guess and config.sub exist and is executable
checking build system type... i686-pc-linux-gnu
checking host system type... i686-pc-linux-gnu
checking for ccache... none
checking for g++... g++
checking whether the C++ compiler works... yes
checking for C++ compiler default output file name... a.out
checking for suffix of executables...
checking whether we are cross compiling... configure: error: in `/home/****/build/xbmc-pvr-svn/src/pvr-testing2':
configure: error: cannot run C++ compiled programs.
If you meant to cross compile, use `--host'.
See `config.log' for more details. -
[SOLVED]getting permission denied
I put this in command line
/mnt/EFI/boot /dev/sda1 vfat rw,flush,tz=UTC
I'm getting a permission error
Last edited by tmccaffery (2013-04-04 10:04:40)The only part of the page you referenced - that I can find pertaining to the bizarre command you wrote - is the section describing how you'd find the device path for the UEFI System Partition. If that's the case you need to make sure you read the guides very carefully, as (in that specific use case) the command is thus;
# findmnt /boot/efi
Minus the # of course, as this is to denote that you are logged in as root.
The command you say you wrote into the terminal is in fact the type of output you'd expect from writing the aforementioned command. Having said all this, if you're writing nonsense to the terminal expecting results I think you should start from scratch, or at least double check what it is that you wish to achieve, as that section is for gummiboot which now has its own installer. -
[SOLVED] Thunar permission denied for all partitions excpt arch
Continuing conversion from other thread: https://bbs.archlinux.org/viewtopic.php?id=128639
I made comments #14, #17, #19, & #22 in that thread that are relevant here.
rene wrote:Earlier you said that you DID need to restore the .pacsave files to have things working, whereas you now say differently so I'll refrain from further comment. If you still have problems after removing all the .pkla files and after replacing SLiM with LXDM you have a different problem than the ConsoleKit one, which IS likely the only problem the thread-starter and the others in this thread are having. We should therefore get out of here so that they can get their problem fixed without this thread wandering off into all sorts of directions.
That is true, but a subsequent update broke it.
Here are the updates I made on 11/05 {I might not have logged out/logged in or rebooted after installing the updates on 11/05 before posting to the thread above on that date - or possibly I was in another OS when I posted my first comment on 11/05 in the thread above}
AM M-05-11 2011 05:37:10DT autoconf
AM M-05-11 2011 05:37:10DT automake
AM M-05-11 2011 05:37:10DT bash
AM M-05-11 2011 05:37:11DT ca-certificates
AM M-05-11 2011 05:37:13DT curl
AM M-05-11 2011 05:37:10DT findutils
AM M-05-11 2011 05:37:10DT gawk
AM M-05-11 2011 05:37:13DT gedit
AM M-05-11 2011 05:37:14DT gettext
PM M-05-11 2011 08:45:59DT gksu
AM M-05-11 2011 05:37:14DT grep
AM M-05-11 2011 05:37:13DT gtksourceview3
AM M-05-11 2011 05:37:14DT gzip
PM M-05-11 2011 07:53:20DT intltool
AM M-05-11 2011 05:37:14DT less
AM M-05-11 2011 05:37:15DT lib32-glib2
AM M-05-11 2011 05:37:15DT lib32-libdrm
AM M-05-11 2011 05:37:15DT lib32-libffi
AM M-05-11 2011 05:37:15DT lib32-readline
AM M-05-11 2011 05:37:15DT libdrm
PM M-05-11 2011 07:53:20DT libfm
PM M-05-11 2011 08:45:59DT libgksu
PM M-05-11 2011 08:45:59DT libgtop
AM M-05-11 2011 05:37:15DT libusb
AM M-05-11 2011 05:37:15DT libva
AM M-05-11 2011 05:37:16DT linux-firmware
PM M-05-11 2011 07:53:21DT lxmenu-data
AM M-05-11 2011 05:37:10DT m4
PM M-05-11 2011 07:53:20DT menu-cache
AM M-05-11 2011 05:37:14DT ncurses
AM M-05-11 2011 05:37:16DT patch
AM M-05-11 2011 05:37:16DT pciutils
AM M-05-11 2011 05:37:16DT pkg-config
AM M-05-11 2011 05:37:16DT prelink
AM M-05-11 2011 05:37:10DT sed
AM M-05-11 2011 05:37:16DT sqlite3
AM M-05-11 2011 05:37:16DT tar
AM M-05-11 2011 05:37:17DT thunar
AM M-05-11 2011 05:37:18DT tzdata
AM M-05-11 2011 05:37:18DT which
AM M-05-11 2011 05:37:18DT xfce4-session
Here are the updates I made on 11/06 & 11/07
PM M-06-11 2011 09:57:51ST bison
PM M-07-11 2011 09:31:54ST cryptsetup
PM M-06-11 2011 09:57:51ST db
PM M-06-11 2011 09:57:51ST dialog
PM M-06-11 2011 09:57:51ST expat
PM M-06-11 2011 09:57:51ST flex
PM M-06-11 2011 09:57:51ST gdbm
PM M-06-11 2011 09:57:52ST imagemagick
PM M-07-11 2011 09:31:54ST keyutils
PM M-06-11 2011 09:57:52ST krb5
PM M-06-11 2011 09:57:52ST lib32-libpciaccess
PM M-06-11 2011 09:57:52ST libcap
PM M-07-11 2011 09:31:54ST libdatrie
PM M-06-11 2011 09:57:52ST libldap
PM M-06-11 2011 09:57:52ST libpcap
PM M-06-11 2011 09:57:52ST libpipeline
PM M-07-11 2011 09:31:54ST libthai
PM M-07-11 2011 09:31:54ST module-init-tools
PM M-06-11 2011 09:57:52ST nano
PM M-06-11 2011 09:57:52ST popt
PM M-06-11 2011 09:57:52ST readline
PM M-06-11 2011 09:57:52ST talloc
PM M-06-11 2011 09:57:52ST texinfo
PM M-06-11 2011 09:57:52ST vi
PM M-06-11 2011 09:57:52ST wpa_actiond
PM M-06-11 2011 09:57:52ST wpa_supplicant
PM M-07-11 2011 09:31:54ST xorg-server
PM M-07-11 2011 09:31:54ST xorg-server-common
Around the above dates I installed pcmanfm to try it out, but subsequently uninstalled it. Thunar was still working at the time.
Subsequently (today) I installed gvfs to see if it made any difference, but it did not.
Last edited by David Batson (2011-11-15 01:08:02)Polkit-gnome was the missing ingredient. With polkit-gnome installed the udisks.pkla file is not required. One difference between the usdisks.pkla fix and the polkit-gnome fix is that you are prompted for root's password to mount the drive. No problem for me there - I prefer it that way.
I did not decipher from the bug report that polkit-gnome was required for thunar in Xfce - only perhaps for thunar in gnome. I wish this had been made more clear in the bug report I filed.
The thunar maintainer for arch wrote: Remove org.freedesktop.udisks.pkla; mounting/unmounting of removable media should continue to function through gvfs. No mention that polkit-gnome was required as well (for all desktops I imagine). I already did have polkit installed - just not polkit-gnome. Polkit was working, just missing some pieces for full functionality.
In the end, I consider it a bug if a dependency is not listed as required or optional.
Package Details: thunar 1.2.3-2
Dependencies (16)
desktop-file-utils
exo
gtk2
hicolor-icon-theme
libexif
libnotify
libpng
libxfce4ui
libxfce4util
udev
gvfs (optional) - for trash support, mounting with udisk and remote filesystems
thunar-archive-plugin (optional) - create and deflate archives
thunar-media-tags-plugin (optional) - view/edit id3/ogg tags
thunar-volman (optional) - manages removable devices
tumbler (optional) - for thumbnail previews
xfce4-panel (optional) - for trash applet
http://www.archlinux.org/packages/extra/x86_64/thunar/
Package Details: gvfs 1.10.1-1
Dependencies (12)
avahi
dconf
fuse
libarchive
libcdio
libgdu
libsoup-gnome
gvfs-afc (optional) - AFC (mobile devices) support
gvfs-afp (optional) - Apple Filing Protocol (AFP) support
gvfs-gphoto2 (optional) - gphoto2 (PTP camera/MTP media player) support
gvfs-obexftp (optional) - ObexFTP (bluetooth) support
gvfs-smb (optional) - SMB/CIFS (Windows client) support
http://www.archlinux.org/packages/extra/x86_64/gvfs/ -
[Solved] Openbox permission denied on everything.
Hello fellow archers, I have decided to use openbox, but for everything i need superuser priveliges. E.g. Chromium isnt working, cant set up vlc, it says configuration can`t be saved, cant mount drives with thunar (nor anything else). So if anyone could point me in the right direction, i would be very thankful.
Last edited by stratoka (2012-07-02 19:16:54)DSpider wrote:
https://wiki.archlinux.org/index.php/Op … d-alone_WM
If you also use PolicyKit and D-Bus (e.g. for automatically mounting drives in Nautilus/GNOME) use:
exec ck-launch-session dbus-launch openbox-session
Place it in your ~/.xinitrc.
Also, make sure that you have the dbus and polkit packages installed and "dbus" in rc.conf (DAEMONS line).
Thanks, done that, doesnt change anything, i`ve also added my user to storage and users. I created a PolicyKit file according to udev, but nothing. I`ve installed lxde, and its working fine. I dont see why isnt working, i`ve used openbox in the past, and i didnt come across these thing.
Last edited by stratoka (2012-06-17 08:31:44) -
[SOLVED]Jmtpfs permission denied
Hello Arch Forums!
I've mounted my encrypted android phone to ~/mnt (directory I made in my home directory) via jmtpfs. ~/mnt shows up in ls, but not in ranger. When I try to unmount my phone fusermount tells me
fusermount: entry for /home/switch/mnt not found in /etc/mtab
How do I get access to my phone, and why won't it unmount?
Last edited by SwitchDhole (2015-03-08 15:08:24)Had to start over. I entered
sudo mkdir /mnt/mobile
Instead of using the one I made in my home folder,
then
jmtpfs /mnt/mobile
Output reads
Unable to open ~/.mtpz-data for reading, MTPZ disabled.
along with info about my device.
In ranger "mobile" is highlited in black and the far right (preview?) says "not accessible".
fusermount -u /mnt/mobile
Gives me
fusermount: entry for /mnt/mobile not found in /etc/mtab
EDIT: fusermount works fine as long as I use sudo.
I can also access my phone via ranger using sudo!
Last edited by SwitchDhole (2015-03-08 15:07:59) -
[SOLVED]xinit as user - dri permission denied
I've tried to launch a game in a separate X instance with:
xinit /usr/bin/ufo -- :1.0 vt2
xinit /usr/bin/ufo -- :1
xinit /usr/bin/env ufo -- :1
etc
but I get very slow rendering and strange output.
X.Org X Server 1.15.0
Release Date: 2013-12-27
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.12.5-1-ARCH i686
Current Operating System: Linux archdesk 3.12.9-1-ARCH #1 SMP PREEMPT Sun Jan 26 09:15:23 CET 2014 i686
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=99a6d650-3886-4252-8ded-db4a892400e2 rw quiet
Build Date: 09 January 2014 09:32:33AM
Current version of pixman: 0.32.4
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.1.log", Time: Sun Jan 26 15:16:22 2014
(==) Using config directory: "/etc/X11/xorg.conf.d"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
setversion 1.4 failed: Permission denied
Initializing built-in extension Generic Event Extension
Initializing built-in extension SHAPE
Initializing built-in extension MIT-SHM
Initializing built-in extension XInputExtension
Initializing built-in extension XTEST
Initializing built-in extension BIG-REQUESTS
Initializing built-in extension SYNC
Initializing built-in extension XKEYBOARD
Initializing built-in extension XC-MISC
Initializing built-in extension SECURITY
Initializing built-in extension XINERAMA
Initializing built-in extension XFIXES
Initializing built-in extension RENDER
Initializing built-in extension RANDR
Initializing built-in extension COMPOSITE
Initializing built-in extension DAMAGE
Initializing built-in extension MIT-SCREEN-SAVER
Initializing built-in extension DOUBLE-BUFFER
Initializing built-in extension RECORD
Initializing built-in extension DPMS
Initializing built-in extension Present
Initializing built-in extension DRI3
Initializing built-in extension X-Resource
Initializing built-in extension XVideo
Initializing built-in extension XVideo-MotionCompensation
Initializing built-in extension XFree86-VidModeExtension
Initializing built-in extension XFree86-DGA
Initializing built-in extension XFree86-DRI
Initializing built-in extension DRI2
Loading extension GLX
(II) [KMS] Kernel modesetting enabled.
setversion 1.4 failed: Permission denied
---- endianness initialization -----
found little endian system
---- filesystem initialization -----
Adding game dir: /usr/share/ufoai/base
Added packfile /usr/share/ufoai/base/0base.pk3 (15 files)
Added packfile /usr/share/ufoai/base/0maps.pk3 (932 files)
Added packfile /usr/share/ufoai/base/0materials.pk3 (54 files)
Added packfile /usr/share/ufoai/base/0media.pk3 (19 files)
Added packfile /usr/share/ufoai/base/0models.pk3 (2801 files)
Added packfile /usr/share/ufoai/base/0music.pk3 (64 files)
Added packfile /usr/share/ufoai/base/0pics.pk3 (1059 files)
Added packfile /usr/share/ufoai/base/0shaders.pk3 (37 files)
Added packfile /usr/share/ufoai/base/0snd.pk3 (362 files)
Added packfile /usr/share/ufoai/base/0textures.pk3 (2721 files)
Added packfile /usr/share/ufoai/base/0ufos.pk3 (137 files)
Could not load '/usr/share/ufoai/base/0videos.pk3'
Adding game dir: ./base
Adding game dir: /home/dok/.ufoai/2.6-dev/base
using /home/dok/.ufoai/2.6-dev/base for writing
executing filesystem.cfg
executing default.cfg
executing config.cfg
----- network initialization -------
libcurl/7.34.0 OpenSSL/1.0.1f zlib/1.2.8 libssh2/1.4.3 initialized.
------ server initialization -------
added 12 maps to the mapcycle
----- console initialization -------
Console initialized.
------- video initialization -------
libGL error: failed to load driver: r300
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
SDL version: 2.0.1
I: setting mode 21
I: disable multisample buffers
I: set swap control to 0
available driver: x11
available driver: dummy
current desktop mode: 1600x900@60Hz (SDL_PIXELFORMAT_RGB888)
libGL error: failed to load driver: r300
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
driver: x11
found 1 display(s)
I: 1440x900 (fullscreen: yes)
I: got 0 bits of stencil
I: got 24 bits of depth buffer
I: got double buffer
I: got 8 bits for red
I: got 8 bits for green
I: got 8 bits for blue
I: got 0 bits for alpha
I: got multisample disabled
I: got 0 multisample buffers
GL_VENDOR: VMware, Inc.
GL_RENDERER: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
GL_VERSION: 2.1 Mesa 10.0.2
GL_EXTENSIONS: GL_ARB_multisample GL_EXT_abgr GL_EXT_bgra GL_EXT_blend_color GL_EXT_blend_minmax
GL_EXT_blend_subtract GL_EXT_copy_texture GL_EXT_polygon_offset GL_EXT_subtexture GL_EXT_texture_object
GL_EXT_vertex_array GL_EXT_compiled_vertex_array GL_EXT_texture GL_EXT_texture3D GL_IBM_rasterpos_clip
GL_ARB_point_parameters GL_EXT_draw_range_elements GL_EXT_packed_pixels GL_EXT_point_parameters
GL_EXT_rescale_normal GL_EXT_separate_specular_color GL_EXT_texture_edge_clamp GL_SGIS_generate_mipmap
GL_SGIS_texture_border_clamp GL_SGIS_texture_edge_clamp GL_SGIS_texture_lod GL_ARB_framebuffer_sRGB
GL_ARB_multitexture GL_EXT_framebuffer_sRGB GL_IBM_multimode_draw_arrays GL_IBM_texture_mirrored_repeat
GL_ARB_texture_cube_map GL_ARB_texture_env_add GL_ARB_transpose_matrix GL_EXT_blend_func_separate GL_EXT_fog_coord
GL_EXT_multi_draw_arrays GL_EXT_secondary_color GL_EXT_texture_env_add GL_EXT_texture_lod_bias
GL_INGR_blend_func_separate GL_NV_blend_square GL_NV_light_max_exponent GL_NV_texgen_reflection
GL_NV_texture_env_combine4 GL_S3_s3tc GL_SUN_multi_draw_arrays GL_ARB_texture_border_clamp
GL_ARB_texture_compression GL_EXT_framebuffer_object GL_EXT_texture_compression_s3tc GL_EXT_texture_env_combine
GL_EXT_texture_env_dot3 GL_MESA_window_pos GL_NV_packed_depth_stencil GL_NV_texture_rectangle GL_ARB_depth_texture
GL_ARB_occlusion_query GL_ARB_shadow GL_ARB_texture_env_combine GL_ARB_texture_env_crossbar GL_ARB_texture_env_dot3
GL_ARB_texture_mirrored_repeat GL_ARB_window_pos GL_EXT_stencil_two_side GL_EXT_texture_cube_map GL_NV_depth_clamp
GL_NV_fog_distance GL_APPLE_packed_pixels GL_APPLE_vertex_array_object GL_ARB_draw_buffers GL_ARB_fragment_program
GL_ARB_fragment_shader GL_ARB_shader_objects GL_ARB_vertex_program GL_ARB_vertex_shader GL_ATI_draw_buffers
GL_ATI_texture_env_combine3 GL_ATI_texture_float GL_EXT_shadow_funcs GL_EXT_stencil_wrap GL_MESA_pack_invert
GL_MESA_ycbcr_texture GL_NV_primitive_restart GL_ARB_depth_clamp GL_ARB_fragment_program_shadow
GL_ARB_half_float_pixel GL_ARB_occlusion_query2 GL_ARB_point_sprite GL_ARB_shading_language_100 GL_ARB_sync
GL_ARB_texture_non_power_of_two GL_ARB_vertex_buffer_object GL_ATI_blend_equation_separate
GL_EXT_blend_equation_separate GL_OES_read_format GL_ARB_color_buffer_float GL_ARB_pixel_buffer_object
GL_ARB_texture_compression_rgtc GL_ARB_texture_float GL_ARB_texture_rectangle GL_ATI_texture_compression_3dc
GL_EXT_packed_float GL_EXT_pixel_buffer_object GL_EXT_texture_compression_dxt1 GL_EXT_texture_compression_rgtc
GL_EXT_texture_mirror_clamp GL_EXT_texture_rectangle GL_EXT_texture_sRGB GL_EXT_texture_shared_exponent
GL_ARB_framebuffer_object GL_EXT_framebuffer_blit GL_EXT_packed_depth_stencil GL_ARB_vertex_array_object
GL_ATI_separate_stencil GL_ATI_texture_mirror_once GL_EXT_draw_buffers2 GL_EXT_draw_instanced
GL_EXT_gpu_program_parameters GL_EXT_texture_array GL_EXT_texture_compression_latc GL_EXT_texture_integer
GL_EXT_texture_sRGB_decode GL_EXT_timer_query GL_OES_EGL_image GL_MESA_texture_array GL_ARB_copy_buffer
GL_ARB_depth_buffer_float GL_ARB_draw_instanced GL_ARB_half_float_vertex GL_ARB_instanced_arrays
GL_ARB_map_buffer_range GL_ARB_texture_rg GL_ARB_texture_swizzle GL_ARB_vertex_array_bgra GL_EXT_texture_swizzle
GL_EXT_vertex_array_bgra GL_NV_conditional_render GL_AMD_conservative_depth GL_AMD_draw_buffers_blend
GL_AMD_seamless_cubemap_per_texture GL_ARB_ES2_compatibility GL_ARB_blend_func_extended GL_ARB_debug_output
GL_ARB_draw_buffers_blend GL_ARB_draw_elements_base_vertex GL_ARB_explicit_attrib_location
GL_ARB_fragment_coord_conventions GL_ARB_provoking_vertex GL_ARB_sampler_objects GL_ARB_seamless_cube_map
GL_ARB_shader_texture_lod GL_ARB_texture_rgb10_a2ui GL_ARB_uniform_buffer_object GL_ARB_vertex_type_2_10_10_10_rev
GL_EXT_provoking_vertex GL_EXT_texture_snorm GL_MESA_texture_signed_rgba GL_ARB_get_program_binary
GL_ARB_robustness GL_ARB_shader_bit_encoding GL_ARB_timer_query GL_ARB_transform_feedback2
GL_ARB_transform_feedback3 GL_NV_vdpau_interop GL_ANGLE_texture_compression_dxt3 GL_ANGLE_texture_compression_dxt5
GL_ARB_conservative_depth GL_ARB_internalformat_uery GL_ARB_shading_language_420pack
GL_ARB_shading_language_packing GL_ARB_texture_storage GL_ARB_transform_feedback_instanced
GL_EXT_transform_feedback GL_ARB_invalidate_subdata GL_ARB_vertex_attrib_binding GL_KHR_debug
GL_ARB_texture_mirror_clamp_to_edge GL_ARB_vertex_type_10f_11f_11f_rev
OpenGL version detected: 2.1found GL_ARB_multitexture
found GL_ARB_texture_compression
found GL_ARB_texture_non_power_of_two
using GL_ARB_texture_non_power_of_two
GL_EXT_texture_filter_anisotropic not found
found GL_EXT_texture_lod_bias
found GL_ARB_vertex_buffer_object
using GL_ARB_vertex_buffer_object
max vertex buffer size: 3000
found GL_ARB_fragment_shader
found GL_ARB_shading_language_100
GLSL version guaranteed to be supported by OpenGL implementation postfixed by vender supplied info: 1.30
found GL_###_framebuffer_object
using GL_ARB_framebuffer_object
max draw buffers: 8
max render buffer size: 8192
max color attachments: 8
found GL_###_draw_buffers
using GL_ARB_draw_buffers
max supported vertex texture units: 16
max supported lights: 8
max texture units: 8
max texture coords: 8
max vertex attributes: 16
max varying floats: 128
max fragment uniform components: 16384
max vertex uniform components: 16384
max texture size: detected 8192
...but using 2048 as requested
Using low resolution globe textures as requested.
R_LoadProgram: 'world_low' loaded.
R_LoadProgram: 'model_low' loaded.
R_LoadProgram: 'warp' loaded.
R_LoadProgram: 'geoscape' loaded.
R_LoadProgram: 'combine2' loaded.
R_LoadProgram: 'convolve3' loaded.
R_LoadProgram: 'atmosphere' loaded.
R_LoadProgram: 'simple_glow' loaded.
SDL_ttf version 2.0.12 - we need at least 2.0.7
------- sound initialization -------
Failed to create secure directory (/run/user/1000/pulse): Permission denied
SDL_mixer version: 2.0.0
... requested audio rate: 44100
Failed to create secure directory (/run/user/1000/pulse): Permission denied
... available audio driver pulseaudio
... available audio driver alsa
... available audio driver dsp
... available audio driver disk
... available audio driver dummy
... actual audio driver: alsa
... audio rate: 44100
... audio channels: 2
... loaded ogg vorbis support
------- input initialization -------
0 possible joysticks
no joystick found.
Allocate 3 megabytes for the ui hunk
------- web initialization ---------
... web access not yet configured
----------- parse scripts ----------
60 script files
59 ui script files
UI_ParseNodeBody: Command name for confunc
'hud_default.soldier.soldier_opts.soldier_buttons.headgear_bg.deselect_headgear' already registered
UI_ParseNodeBody: Command name for confunc
'hud_default.soldier.soldier_opts.soldier_buttons.headgear_bg.disable_headgear' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.soldier_opts.soldier_buttons.deselect_stand'
already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.soldier_opts.soldier_buttons.deselect_crouch'
already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.soldier_opts.soldier_buttons.disable_stand' already
registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.soldier_opts.soldier_buttons.disable_crouch'
already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.deselect_primaryleft' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.deselect_primaryright' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.deselect_reloadleft' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.deselect_reloadright' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.disable_primaryleft' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.disable_primaryright' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.disable_reloadleft' already registered
UI_ParseNodeBody: Command name for confunc 'hud_default.soldier.weapon.disable_reloadright' already registered
UI_ParseNodeBody: Command name for confunc 'singleplayermission.check_if_in_campaign_mode' already registered
Shared Client/Server Info loaded
...123 items parsed
... 32 damage types parsed
... 32 equipment definitions parsed
... 10 inventory definitions parsed
... 25 team definitions parsed
executing keys.cfg
UI_SetKeyBinding: node "employees.employee_list@pageUp" not found.
UI_SetKeyBinding: node "employees.employee_list@pageDown" not found.
UI_SetKeyBinding: node "employees.employee_list@moveUp" not found.
UI_SetKeyBinding: node "employees.employee_list@moveDown" not found.
UI_SetKeyBinding: node "employees.employee_list@moveHome" not found.
UI_SetKeyBinding: node "employees.employee_list@moveEnd" not found.
UI_SetKeyBinding: node "sequence.next" not found.
Music: track changed from to van_theme.
executing autoexec.cfg
"version" is "UFO: Alien Invasion 2.6-dev IA-32 Jan 25 2014 Linux RELEASE"
79 static models loaded
CL_LanguageInit: language settings are stored in configuration: en
...using language: en_GB.utf8
SDL_ttf version 2.0.12 - we need at least 2.0.7
...registering 14 fonts
----------- parse msgids -----------
18 msgid files
no translation for ufo_carrier_txt
no translation for ufo_ripper_txt
no translation for ufo_mothership_txt
no translation for mail_ufocarrier
no translation for ugv_phoenix_txt
no translation for ugv_ares_w_txt
no translation for ugv_chaingun_txt
no translation for ugv_chaingun_belt_txt
no translation for ugv_weapon_autocannon_txt
no translation for ugv_weapon_autocannon_pre_txt
no translation for vhs_assault_txt
no translation for xaw95_txt
no translation for bombkit1_txt
no translation for chaingun_txt
----------- game modes -------------
added _Multiplayer
added _Campaign
added _Skirmish
added 3 game modes
====== UFO Initialized ======
=============================
Switch grab input off
Wrote config.cfg.
Wrote keys.cfg
recursive shutdown
Error: Received signal 11.
xinit: connection to X server lost
waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
libGL error: failed to load driver: r300
libGL error: Try again with LIBGL_DEBUG=verbose for more details.
caught my eye so I ran
LIBGL_DEBUG=verbose xinit /usr/bin/xterm -- :1
and in the resulting terminal a
glxinfo | grep render
which gave me:
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/r300_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/r300_dri.so
libGL: driver does not expose __driDriverGetExtensions_r300():
/usr/lib/xorg/modules/dri/r300_dri.so: undefined symbol:
__driDriverGetExtensions_r300
libGL error: failed to open drm device: Permission denied
libGL error: failed to load driver: r300
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/tls/swrast_dri.so
libGL: OpenDriver: trying /usr/lib/xorg/modules/dri/swrast_dri.so
libGL: driver does not expose __driDriverGetExtensions_swrast():
/usr/lib/xorg/modules/dri/swrast_dri.so: undefined symbol:
__driDriverGetExtensions_swrast
libGL: Can't open configuration file /home/dok/.drirc: No such file or
directory.
libGL: Can't open configuration file /home/dok/.drirc: No such file or
directory.
direct rendering: Yes
GLX_MESA_multithread_makecurrent, GLX_MESA_query_renderer,
OpenGL renderer string: Gallium 0.4 on llvmpipe (LLVM 3.4, 128 bits)
GL_NV_conditional_render, GL_NV_depth_clamp, GL_NV_fog_distance,
and an Xorg.0.log
[ 2185.905]
X.Org X Server 1.15.0
Release Date: 2013-12-27
[ 2185.905] X Protocol Version 11, Revision 0
[ 2185.906] Build Operating System: Linux 3.12.5-1-ARCH i686
[ 2185.906] Current Operating System: Linux archdesk 3.12.9-1-ARCH #1 SMP PREEMPT Sun Jan 26 09:15:23 CET 2014 i686
[ 2185.906] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=99a6d650-3886-4252-8ded-db4a892400e2 rw quiet
[ 2185.907] Build Date: 09 January 2014 09:32:33AM
[ 2185.907]
[ 2185.907] Current version of pixman: 0.32.4
[ 2185.907] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2185.907] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2185.908] (==) Log file: "/var/log/Xorg.1.log", Time: Sun Jan 26 16:35:29 2014
[ 2185.909] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 2185.909] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2185.909] (==) No Layout section. Using the first Screen section.
[ 2185.909] (==) No screen section available. Using defaults.
[ 2185.909] (**) |-->Screen "Default Screen Section" (0)
[ 2185.909] (**) | |-->Monitor "<default monitor>"
[ 2185.911] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 2185.911] (==) Automatically adding devices
[ 2185.911] (==) Automatically enabling devices
[ 2185.911] (==) Automatically adding GPU devices
[ 2185.911] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 2185.911] Entry deleted from font path.
[ 2185.912] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 2185.912] Entry deleted from font path.
[ 2185.912] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 2185.912] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 2185.912] Entry deleted from font path.
[ 2185.912] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 2185.912] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 2185.912] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 2185.912] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 2185.912] (II) Loader magic: 0x8265660
[ 2185.912] (II) Module ABI versions:
[ 2185.912] X.Org ANSI C Emulation: 0.4
[ 2185.912] X.Org Video Driver: 15.0
[ 2185.912] X.Org XInput driver : 20.0
[ 2185.912] X.Org Server Extension : 8.0
[ 2185.913] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2185.915] setversion 1.4 failed: Permission denied
[ 2185.918] (--) PCI:*(0:1:0:0) 1002:7280:17af:2172 rev 154, Mem @ 0xe0000000/268435456, 0xfdff0000/65536, I/O @ 0x0000bc00/256, BIOS @ 0x????????/131072
[ 2185.918] (--) PCI: (0:1:0:1) 1002:72a0:17af:2173 rev 154, Mem @ 0xfdfe0000/65536
[ 2185.918] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2185.926] Initializing built-in extension Generic Event Extension
[ 2185.927] Initializing built-in extension SHAPE
[ 2185.927] Initializing built-in extension MIT-SHM
[ 2185.927] Initializing built-in extension XInputExtension
[ 2185.927] Initializing built-in extension XTEST
[ 2185.927] Initializing built-in extension BIG-REQUESTS
[ 2185.927] Initializing built-in extension SYNC
[ 2185.927] Initializing built-in extension XKEYBOARD
[ 2185.927] Initializing built-in extension XC-MISC
[ 2185.928] Initializing built-in extension SECURITY
[ 2185.928] Initializing built-in extension XINERAMA
[ 2185.928] Initializing built-in extension XFIXES
[ 2185.928] Initializing built-in extension RENDER
[ 2185.928] Initializing built-in extension RANDR
[ 2185.928] Initializing built-in extension COMPOSITE
[ 2185.928] Initializing built-in extension DAMAGE
[ 2185.928] Initializing built-in extension MIT-SCREEN-SAVER
[ 2185.928] Initializing built-in extension DOUBLE-BUFFER
[ 2185.928] Initializing built-in extension RECORD
[ 2185.929] Initializing built-in extension DPMS
[ 2185.929] Initializing built-in extension Present
[ 2185.929] Initializing built-in extension DRI3
[ 2185.929] Initializing built-in extension X-Resource
[ 2185.929] Initializing built-in extension XVideo
[ 2185.929] Initializing built-in extension XVideo-MotionCompensation
[ 2185.929] Initializing built-in extension XFree86-VidModeExtension
[ 2185.929] Initializing built-in extension XFree86-DGA
[ 2185.929] Initializing built-in extension XFree86-DRI
[ 2185.930] Initializing built-in extension DRI2
[ 2185.930] (II) "glx" will be loaded by default.
[ 2185.930] (II) LoadModule: "dri2"
[ 2185.930] (II) Module "dri2" already built-in
[ 2185.930] (II) LoadModule: "glamoregl"
[ 2185.930] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 2185.948] (II) Module glamoregl: vendor="X.Org Foundation"
[ 2185.949] compiled for 1.15.0, module version = 0.6.0
[ 2185.949] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2185.949] (II) LoadModule: "glx"
[ 2185.949] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2185.950] (II) Module glx: vendor="X.Org Foundation"
[ 2185.950] compiled for 1.15.0, module version = 1.0.0
[ 2185.950] ABI class: X.Org Server Extension, version 8.0
[ 2185.950] (==) AIGLX enabled
[ 2185.950] Loading extension GLX
[ 2185.950] (==) Matched ati as autoconfigured driver 0
[ 2185.950] (==) Matched modesetting as autoconfigured driver 1
[ 2185.950] (==) Matched fbdev as autoconfigured driver 2
[ 2185.950] (==) Matched vesa as autoconfigured driver 3
[ 2185.950] (==) Assigned the driver to the xf86ConfigLayout
[ 2185.950] (II) LoadModule: "ati"
[ 2185.951] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 2185.951] (II) Module ati: vendor="X.Org Foundation"
[ 2185.951] compiled for 1.15.0, module version = 7.3.0
[ 2185.951] Module class: X.Org Video Driver
[ 2185.951] ABI class: X.Org Video Driver, version 15.0
[ 2185.951] (II) LoadModule: "radeon"
[ 2185.951] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 2185.952] (II) Module radeon: vendor="X.Org Foundation"
[ 2185.952] compiled for 1.15.0, module version = 7.3.0
[ 2185.952] Module class: X.Org Video Driver
[ 2185.952] ABI class: X.Org Video Driver, version 15.0
[ 2185.952] (II) LoadModule: "modesetting"
[ 2185.958] (WW) Warning, couldn't open module modesetting
[ 2185.958] (II) UnloadModule: "modesetting"
[ 2185.958] (II) Unloading modesetting
[ 2185.958] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 2185.958] (II) LoadModule: "fbdev"
[ 2185.958] (WW) Warning, couldn't open module fbdev
[ 2185.958] (II) UnloadModule: "fbdev"
[ 2185.958] (II) Unloading fbdev
[ 2185.958] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 2185.958] (II) LoadModule: "vesa"
[ 2185.958] (WW) Warning, couldn't open module vesa
[ 2185.958] (II) UnloadModule: "vesa"
[ 2185.958] (II) Unloading vesa
[ 2185.958] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 2185.958] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO2, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, OLAND,
OLAND, OLAND, OLAND, OLAND, OLAND, OLAND, HAINAN, HAINAN, HAINAN,
HAINAN, HAINAN, HAINAN, BONAIRE, BONAIRE, BONAIRE, BONAIRE, BONAIRE,
BONAIRE, BONAIRE, BONAIRE, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI, KABINI,
KABINI, KABINI, KABINI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI, KAVERI,
HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII, HAWAII,
HAWAII, HAWAII, HAWAII, HAWAII
[ 2185.974] (--) using VT number 2
[ 2186.554] (II) [KMS] Kernel modesetting enabled.
[ 2186.554] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 2186.554] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 2186.554] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 2186.554] (==) RADEON(0): Default visual is TrueColor
[ 2186.554] (==) RADEON(0): RGB weight 888
[ 2186.554] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 2186.554] (--) RADEON(0): Chipset: "ATI Radeon X1950" (ChipID = 0x7280)
[ 2186.554] (II) Loading sub module "dri2"
[ 2186.554] (II) LoadModule: "dri2"
[ 2186.554] (II) Module "dri2" already built-in
[ 2186.554] (II) Loading sub module "exa"
[ 2186.554] (II) LoadModule: "exa"
[ 2186.555] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 2186.555] (II) Module exa: vendor="X.Org Foundation"
[ 2186.555] compiled for 1.15.0, module version = 2.6.0
[ 2186.555] ABI class: X.Org Video Driver, version 15.0
[ 2186.555] (II) RADEON(0): KMS Color Tiling: enabled
[ 2186.555] (II) RADEON(0): KMS Color Tiling 2D: disabled
[ 2186.555] (II) RADEON(0): KMS Pageflipping: enabled
[ 2186.555] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 2186.596] (II) RADEON(0): Output DVI-0 has no monitor section
[ 2186.636] (II) RADEON(0): Output S-video has no monitor section
[ 2186.672] (II) RADEON(0): Output DVI-1 has no monitor section
[ 2186.713] (II) RADEON(0): EDID for output DVI-0
[ 2186.753] (II) RADEON(0): EDID for output S-video
[ 2186.789] (II) RADEON(0): EDID for output DVI-1
[ 2186.789] (II) RADEON(0): Manufacturer: HWP Model: 2827 Serial#: 16843009
[ 2186.789] (II) RADEON(0): Year: 2009 Week: 20
[ 2186.789] (II) RADEON(0): EDID Version: 1.3
[ 2186.789] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 2186.789] (II) RADEON(0): Sync: Separate
[ 2186.789] (II) RADEON(0): Max Image Size [cm]: horiz.: 44 vert.: 25
[ 2186.789] (II) RADEON(0): Gamma: 2.20
[ 2186.789] (II) RADEON(0): DPMS capabilities: StandBy Suspend Off; RGB/Color Display
[ 2186.789] (II) RADEON(0): Default color space is primary color space
[ 2186.789] (II) RADEON(0): First detailed timing is preferred mode
[ 2186.789] (II) RADEON(0): redX: 0.650 redY: 0.335 greenX: 0.295 greenY: 0.605
[ 2186.790] (II) RADEON(0): blueX: 0.145 blueY: 0.075 whiteX: 0.313 whiteY: 0.329
[ 2186.790] (II) RADEON(0): Supported established timings:
[ 2186.790] (II) RADEON(0): 720x400@70Hz
[ 2186.790] (II) RADEON(0): 640x480@60Hz
[ 2186.790] (II) RADEON(0): 800x600@60Hz
[ 2186.790] (II) RADEON(0): 1024x768@60Hz
[ 2186.790] (II) RADEON(0): Manufacturer's mask: 0
[ 2186.790] (II) RADEON(0): Supported standard timings:
[ 2186.790] (II) RADEON(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 2186.790] (II) RADEON(0): #1: hsize: 1440 vsize 900 refresh: 60 vid: 149
[ 2186.790] (II) RADEON(0): Supported detailed timing:
[ 2186.790] (II) RADEON(0): clock: 108.0 MHz Image Size: 442 x 249 mm
[ 2186.790] (II) RADEON(0): h_active: 1600 h_sync: 1624 h_sync_end 1704 h_blank_end 1800 h_border: 0
[ 2186.790] (II) RADEON(0): v_active: 900 v_sync: 901 v_sync_end 904 v_blanking: 1000 v_border: 0
[ 2186.790] (II) RADEON(0): Ranges: V min: 48 V max: 76 Hz, H min: 24 H max: 85 kHz, PixClock max 175 MHz
[ 2186.790] (II) RADEON(0): Monitor name: HP 2009
[ 2186.790] (II) RADEON(0): Serial No: CNC9200VZ4
[ 2186.790] (II) RADEON(0): EDID (in hex):
[ 2186.790] (II) RADEON(0): 00ffffffffffff0022f0272801010101
[ 2186.790] (II) RADEON(0): 14130103682c1978eeb815a6554b9b25
[ 2186.790] (II) RADEON(0): 135054a1080081809500010101010101
[ 2186.790] (II) RADEON(0): 010101010101302a40c8608464301850
[ 2186.790] (II) RADEON(0): 1300baf91000001e000000fd00304c18
[ 2186.790] (II) RADEON(0): 5511000a202020202020000000fc0048
[ 2186.790] (II) RADEON(0): 5020323030390a2020202020000000ff
[ 2186.790] (II) RADEON(0): 00434e4339323030565a340a202000a2
[ 2186.790] (II) RADEON(0): Printing probed modes for output DVI-1
[ 2186.790] (II) RADEON(0): Modeline "1600x900"x60.0 108.00 1600 1624 1704 1800 900 901 904 1000 +hsync +vsync (60.0 kHz eP)
[ 2186.790] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2186.790] (II) RADEON(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2186.791] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2186.791] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2186.791] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 2186.791] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 2186.791] (II) RADEON(0): Output DVI-0 disconnected
[ 2186.791] (II) RADEON(0): Output S-video disconnected
[ 2186.791] (II) RADEON(0): Output DVI-1 connected
[ 2186.791] (II) RADEON(0): Using exact sizes for initial modes
[ 2186.791] (II) RADEON(0): Output DVI-1 using initial mode 1600x900
[ 2186.791] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2186.791] (II) RADEON(0): mem size init: gart size :7dff000 vram size: s:20000000 visible:1fa41000
[ 2186.791] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 2186.791] (==) RADEON(0): DPI set to (96, 96)
[ 2186.791] (II) Loading sub module "fb"
[ 2186.791] (II) LoadModule: "fb"
[ 2186.792] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2186.792] (II) Module fb: vendor="X.Org Foundation"
[ 2186.792] compiled for 1.15.0, module version = 1.0.0
[ 2186.793] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2186.793] (II) Loading sub module "ramdac"
[ 2186.793] (II) LoadModule: "ramdac"
[ 2186.793] (II) Module "ramdac" already built-in
[ 2186.793] (--) Depth 24 pixmap format is 32 bpp
[ 2186.793] (II) RADEON(0): [DRI2] Setup complete
[ 2186.793] (II) RADEON(0): [DRI2] DRI driver: r300
[ 2186.793] (II) RADEON(0): [DRI2] VDPAU driver: r300
[ 2186.793] (II) RADEON(0): Front buffer size: 5700K
[ 2186.793] (II) RADEON(0): VRAM usage limit set to 461404K
[ 2186.794] (==) RADEON(0): Backing store enabled
[ 2186.794] (II) RADEON(0): Direct rendering enabled
[ 2186.794] (II) RADEON(0): Render acceleration enabled for R300/R400/R500 type cards.
[ 2186.794] (II) EXA(0): Driver allocated offscreen pixmaps
[ 2186.794] (II) EXA(0): Driver registered support for the following operations:
[ 2186.794] (II) Solid
[ 2186.794] (II) Copy
[ 2186.794] (II) Composite (RENDER acceleration)
[ 2186.794] (II) UploadToScreen
[ 2186.794] (II) DownloadFromScreen
[ 2186.794] (II) RADEON(0): Acceleration enabled
[ 2186.794] (==) RADEON(0): DPMS enabled
[ 2186.794] (==) RADEON(0): Silken mouse enabled
[ 2186.794] (II) RADEON(0): Set up textured video
[ 2186.794] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 2186.794] (II) RADEON(0): [XvMC] Extension initialized.
[ 2186.794] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2186.797] (--) RandR disabled
[ 2186.840] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 2186.840] (II) AIGLX: enabled GLX_ARB_create_context
[ 2186.840] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 2186.840] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 2186.840] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 2186.840] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 2186.840] (II) AIGLX: enabled GLX_EXT_framebuffer_sRGB
[ 2186.840] (II) AIGLX: enabled GLX_ARB_fbconfig_float
[ 2186.840] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 2186.841] (II) AIGLX: Loaded and initialized r300
[ 2186.841] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 2186.842] (II) RADEON(0): Setting screen physical size to 423 x 238
[ 2186.916] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 2186.916] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2186.916] (II) LoadModule: "evdev"
[ 2186.916] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2186.916] (II) Module evdev: vendor="X.Org Foundation"
[ 2186.916] compiled for 1.15.0, module version = 2.8.2
[ 2186.916] Module class: X.Org XInput Driver
[ 2186.916] ABI class: X.Org XInput driver, version 20.0
[ 2186.916] (II) Using input driver 'evdev' for 'Power Button'
[ 2186.916] (**) Power Button: always reports core events
[ 2186.916] (**) evdev: Power Button: Device: "/dev/input/event3"
[ 2186.916] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2186.916] (--) evdev: Power Button: Found keys
[ 2186.916] (II) evdev: Power Button: Configuring as keyboard
[ 2186.916] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event3"
[ 2186.916] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2186.916] (**) Option "xkb_rules" "evdev"
[ 2186.916] (**) Option "xkb_model" "pc104"
[ 2186.916] (**) Option "xkb_layout" "us"
[ 2186.955] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 2186.955] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2186.955] (II) Using input driver 'evdev' for 'Power Button'
[ 2186.955] (**) Power Button: always reports core events
[ 2186.955] (**) evdev: Power Button: Device: "/dev/input/event2"
[ 2186.955] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2186.955] (--) evdev: Power Button: Found keys
[ 2186.955] (II) evdev: Power Button: Configuring as keyboard
[ 2186.955] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3/event2"
[ 2186.955] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 2186.955] (**) Option "xkb_rules" "evdev"
[ 2186.955] (**) Option "xkb_model" "pc104"
[ 2186.955] (**) Option "xkb_layout" "us"
[ 2186.956] (II) config/udev: Adding input device Afatech DVB-T 2 (/dev/input/event1)
[ 2186.956] (**) Afatech DVB-T 2: Applying InputClass "evdev keyboard catchall"
[ 2186.956] (II) Using input driver 'evdev' for 'Afatech DVB-T 2'
[ 2186.956] (**) Afatech DVB-T 2: always reports core events
[ 2186.956] (**) evdev: Afatech DVB-T 2: Device: "/dev/input/event1"
[ 2186.956] (--) evdev: Afatech DVB-T 2: Vendor 0x1b80 Product 0xe399
[ 2186.956] (--) evdev: Afatech DVB-T 2: Found keys
[ 2186.956] (II) evdev: Afatech DVB-T 2: Configuring as keyboard
[ 2186.956] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.2/usb2/2-5/2-5:1.1/input/input2/event1"
[ 2186.956] (II) XINPUT: Adding extended input device "Afatech DVB-T 2" (type: KEYBOARD, id 8)
[ 2186.956] (**) Option "xkb_rules" "evdev"
[ 2186.956] (**) Option "xkb_model" "pc104"
[ 2186.956] (**) Option "xkb_layout" "us"
[ 2186.957] (II) config/udev: Adding input device KWorld PlusTV Dual DVB-T Stick (DVB-T 399U) (/dev/input/event6)
[ 2186.957] (**) KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Applying InputClass "evdev keyboard catchall"
[ 2186.957] (II) Using input driver 'evdev' for 'KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)'
[ 2186.957] (**) KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): always reports core events
[ 2186.957] (**) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Device: "/dev/input/event6"
[ 2186.957] (--) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Vendor 0x1b80 Product 0xe399
[ 2186.957] (--) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Found keys
[ 2186.957] (II) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Configuring as keyboard
[ 2186.957] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.2/usb2/2-5/rc/rc0/input7/event6"
[ 2186.957] (II) XINPUT: Adding extended input device "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)" (type: KEYBOARD, id 9)
[ 2186.957] (**) Option "xkb_rules" "evdev"
[ 2186.957] (**) Option "xkb_model" "pc104"
[ 2186.957] (**) Option "xkb_layout" "us"
[ 2186.957] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 2186.957] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2186.958] setversion 1.4 failed: Permission denied
[ 2186.958] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2186.958] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2186.958] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2186.958] (**) AT Translated Set 2 keyboard: always reports core events
[ 2186.958] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2186.958] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2186.958] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2186.958] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2186.958] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2186.958] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 2186.958] (**) Option "xkb_rules" "evdev"
[ 2186.958] (**) Option "xkb_model" "pc104"
[ 2186.958] (**) Option "xkb_layout" "us"
[ 2186.959] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event5)
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 2186.959] (II) Using input driver 'evdev' for 'ImPS/2 Generic Wheel Mouse'
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 2186.959] (**) evdev: ImPS/2 Generic Wheel Mouse: Device: "/dev/input/event5"
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Vendor 0x2 Product 0x5
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Found 3 mouse buttons
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Found scroll wheel(s)
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Found relative axes
[ 2186.959] (--) evdev: ImPS/2 Generic Wheel Mouse: Found x and y relative axes
[ 2186.959] (II) evdev: ImPS/2 Generic Wheel Mouse: Configuring as mouse
[ 2186.959] (II) evdev: ImPS/2 Generic Wheel Mouse: Adding scrollwheel support
[ 2186.959] (**) evdev: ImPS/2 Generic Wheel Mouse: YAxisMapping: buttons 4 and 5
[ 2186.959] (**) evdev: ImPS/2 Generic Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2186.959] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input6/event5"
[ 2186.959] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 11)
[ 2186.959] (II) evdev: ImPS/2 Generic Wheel Mouse: initialized for relative axes.
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 2186.959] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 2186.960] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse0)
[ 2186.960] (II) No input driver specified, ignoring this device.
[ 2186.960] (II) This device may have been added with another device file.
[ 2186.960] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 2186.960] (II) No input driver specified, ignoring this device.
[ 2186.960] (II) This device may have been added with another device file.
[ 2192.987] (II) evdev: ImPS/2 Generic Wheel Mouse: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: KWorld PlusTV Dual DVB-T Stick (DVB-T 399U): Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: Afatech DVB-T 2: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: Power Button: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2192.987] (II) evdev: Power Button: Close
[ 2192.987] (II) UnloadModule: "evdev"
[ 2193.034] (EE) Server terminated successfully (0). Closing log file.
when I run those xinit commands as root I get good screens with proper outputs.
I've tried to run the script from https://wiki.archlinux.org/index.php/Ru … _X_display
and another script which I've used in the past
#!/bin/bash
xinit /dev/stdin -- :1 vt8 -ac -depth 24 <<EOF
xrandr --output LVDS1 --mode 1400x900 -d :1
/usr/bin/ufo
EOF
I have to say that I'm stuck.
pacman -Ss xf86-video | grep installed
gives:
extra/xf86-video-ati 1:7.3.0-1 (xorg-drivers xorg) [installed]
If I run the game on an established screen, there is no problem. What can I do? Is it safe to run xinit as root?
Thanks
EDIT SOLVED:
Ok, so it seems I was close. This is what works for me:
Go to a virtual terminal, let's say vt1 and login as your user:
xinit /usr/bin/ufo -- :1 vt1
The command can be run from an existing session or from the vt itself. The "trick" is to do with session permissions, it's important to be logged in to the virtual terminal as a user with X permissions. This is info missing from the wiki pages.
Last edited by jackwild (2014-01-28 03:20:26)tomk wrote:Directories have to be executable - yours wasn't.
Thanks. Hadn't thought about that.
ngoonee wrote:You probably ran (or had a bad package/script run) chmod 666 -R on your ~/
Maybe. Tried to retrace my steps to figure out what I did, but because I did it at work I did everything in like five-minute-pieces, getting distracted all the time. The only thing I can think of that actually touched the folder at installation time was the "sakura" community package, though I don't believe that it would do something like that. I'll try to do it again when I'm at work though. Just to make sure.
Thanks anyway for your input. -
Make: execvp: /usr/bin: Permission denied[SOLVED]
hey, I'm trying to install an app called jconv.
I get this error:
make: execvp: /usr/bin: Permission denied
here is the make file..(don't have the first clue on making a PKGBUILD)
# Copyright (C) 2005-2007 Fons Adriaensen <[email protected]>
# This program is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of the License, or
# (at your option) any later version.
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
PREFIX = /usr
SUFFIX := $(shell uname -m | sed -e 's/^unknown/$//' -e 's/^i.86/$//' -e 's/^x86_64/$/64/')
LIBDIR = lib$(SUFFIX)
DISTDIR = jconv-$(VERSION)
VERSION = 0.2.0
LDFLAGS += -L$(PREFIX)/$(LIBDIR)
CPPFLAGS += -O3 -Wall -MMD -MP -DVERSION=\"$(VERSION)\"
#CPPFLAGS += -march=i686 -mtune=pentium4 -msse -msse2 -m3dnow -O3 -ffast-math
# Uncomment if you use a libsndfile version without support for setting/getting the Ambisonic flags.
CPPFLAGS += -DNOAMBIS=1
all: jconv fconv mkwavex
JCONV_O = jconv.o config.o jconfig.o jclient.o
jconv: LDLIBS += -lzita-convolver -lfftw3f -lsndfile -lclthreads -ljack -lpthread -lrt
jconv: $(JCONV_O)
g++ $(LDFLAGS) -o $@ $(JCONV_O) $(LDLIBS)
$(JCONV_O):
-include $(JCONV_O:%.o=%.d)
FCONV_O = fconv.o config.o fconfig.o
fconv: LDLIBS += -lzita-convolver -lfftw3f -lsndfile -lpthread -lrt
fconv: $(FCONV_O)
g++ $(LDFLAGS) -o $@ $(FCONV_O) $(LDLIBS)
$(FCONV_O):
-include $(FCONV_O:%.o=%.d)
MKWAVEX_O = mkwavex.o impdata.o
mkwavex : LDLIBS += -lsndfile -lrt
mkwavex: $(MKWAVEX_O)
g++ $(LDFLAGS) -o $@ $(MKWAVEX_O) $(LDLIBS)
install: jconv fconv mkwavex
/usr/bin/install -m 755 jconv $(PREFIX)/bin
/usr/bin/install -m 755 fconv $(PREFIX)/bin
/usr/bin/install -m 755 mkwavex $(PREFIX)/bin
clean:
/bin/rm -f *~ *.o *.a *.d *.so jconv fconv
Last edited by funkmuscle (2008-10-23 21:51:15)Thanx Chok. I know that. That's why I'm posting this. This app was make for debian so it's something to do with:
install: jconv fconv mkwavex
/usr/bin/install -m 755 jconv $(PREFIX)/bin
/usr/bin/install -m 755 fconv $(PREFIX)/bin
/usr/bin/install -m 755 mkwavex $(PREFIX)/bin
solved...I removed [/usr/bin/install -m 755] and replaced with [install]
so it looked like this:
install $(PREFIX)/bin
Last edited by funkmuscle (2008-10-23 21:50:26) -
[SOLVED] /dev/null: Permission Denied
just tryin to run makechrootpkg, and was working fine 'till something happened recently.. now I get this:
/usr/bin/makepkg: line 390: /dev/null: Permission denied
==> Retrieving Sources...
/usr/bin/makepkg: line 461: /dev/null: Permission denied
can anyone make sense of it? =/
EDIT: nvm.. thankies #archlinux =P
Last edited by Stythys (2010-06-05 17:33:33)I know it's solved, but I had the same issue today and fixed it like this:
Add the following to the "mem" section in /usr/lib/udev/rules.d/50-udev-default.rules:
SUBSYSTEM=="mem", KERNEL=="null|zero|full|random|urandom", MODE="0666" -
[solved] "permission denied" even though I am logged in as root
Hi, I just installed Arch and now I am trying to add repositories to pacman.
I am currently logged in as root
[root@arch ~]#
Now I am trying to access /etc/pacman.conf by typing
/etc/pacman.conf
wich returns
-basch: /etc/pacman.conf: Permission denied
So I checked the forum and the wiki how to check permissions for files. found this wiki.archlinux.org/index.php/File_Permi … ermissions
so I did
# cd /etc
# ls -l
wich gave me
-rw-r--r-- 1 root root 2862 Jun 18 06:01 pacman.conf
If I read this correctly it says that "root" can read and write. But I am logged in as "root" so why can I not edit the file?
Last edited by ningfengrui (2013-08-21 09:50:17)No problem at all & welcome to arch.
If you had not been so new, I would not of been this kind to you because the first result of a google search of "basch: /etc/pacman.conf: Permission denied" would have given you the answer you needed
But hey! we all make the same mistake, but be sure to search for the answer before you ask here.
Also, you need to edit the title of your original post to read "[Solved] "permission denied" even though I am logged in as root"
lecture over ! & again, welcome to arch -
I've set up mpd according to the wiki.
/etc/mpd.conf:
music_directory "/var/lib/mpd/music"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/mpd.db"
log_file "/var/log/mpd/mpd.log"
pid_file "/run/mpd/mpd.pid
state_file "/var/lib/mpd/mpdstate"
user "mpd"
audio_output {
type "pulse"
name "My Pulse Output"
# server "remote_server" # optional
# sink "remote_server_sink" # optional
/var/lib/mpd/music is a symlink to /home/dennis/Musik/mpd/. I've given the mpd user recursive ownership to both /var/lib/mpd/ and /home/dennis/Musik/mpd/.
When I try to update the database (I've tried both mpc and Sonata), the log says
Failed to stat /var/lib/mpd/music: Permission denied
What permission am I missing?
SOLUTION:
I used the script config instead and it worked flawlessly.
Last edited by snufkin (2013-01-03 00:18:44)I returned this:
ene 17 21:00:55 ddich systemd[1]: Starting Music Player Daemon...
ene 17 21:00:55 ddich systemd[1]: Started Music Player Daemon.
ene 17 21:00:55 ddich mpd[14061]: output: No 'audio_output' defined in config file
ene 17 21:00:55 ddich mpd[14061]: output: Attempt to detect audio output device
ene 17 21:00:55 ddich mpd[14061]: output: Attempting to detect a alsa audio device
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:768:(parse_card) cannot find card '0'
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_card_dri...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:392:(snd_func_concat) error evaluating strings
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_concat r...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib confmisc.c:1251:(snd_func_refer) error evaluating name
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4248:(_snd_config_evaluate) function snd_func_refer re...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib conf.c:4727:(snd_config_expand) Evaluate error: No such file ...ctory
ene 17 21:00:55 ddich mpd[14061]: ALSA lib pcm.c:2239:(snd_pcm_open_noupdate) Unknown PCM default
ene 17 21:00:55 ddich systemd[1]: mpd.service: main process exited, code=killed, status=6/ABRT
ene 17 21:00:55 ddich systemd[1]: Unit mpd.service entered failed state. -
[solved] -bash: ./test: Permission denied
hello every one
I have created a test file:
#!/bin/sh
echo "hello, this is a test"
ls
then
chmod +x test
./test
and the result is
-bash: ./test: Permission denied
pleas help me no shell scrips work!!!
Last edited by hsn (2009-09-08 08:05:16)nowahn wrote:
what are the outputs of these commands :
ls -dl .
ls -l test
mount
Is the partition holding your working directory mounted with the "noexec" option ?
Thanks -
[SOLVED]"permission denied" when building pkg
most consistantly, I get the error when a pkgbuild has the line: ./autogen.sh
in building linphone-git, mediastreamer-git and ortp-git
another time, I got burned with the line: ./system.tmp
from building wiimms-iso-tools
and the last pkg I tried to build, I got it on the line: ./file2h
while building linux-wbfs-manager
...it really bugs me about these packages, because my desktop has the exact same install and works fine (so well, I can build them on the desktop and install them on the laptop... but that becomes tedious after a while, so I'd like to fix this issue... I searched for the issue in the forums, and it always semed to be related to the actual pkgbuild... but that's not the case in my scenario because the build works fine on the desktop and kicks me in the teeth on the laptop. Please ask whatever questions necessary to get the info needed to deal with this issue. I'm not really strong at pkgbuild configurations (only make a couple for my own to test my abiliities) so I'm not sure what to include exactly. I can include the line numbers for the pkgbuilds in question, but I'm sure the PKGBBUILDs are not the issue here... it's something to do with my laptop...
come to think of it, my desktop isn't quite up to date as my laptop, I think... because the laptop ran into an issue where python-qt and python-sip were attempting to replace python2-qt and python2-sip, but both python2 pkgs were deps for like 50+ other packages... so I'm not sure if that's related. Pretty sure I didn't update my desktop and get that issue... not in the last couple of days. And that issue started on my laptop today... both issues, actually, so maybe they are related.
SOLUTION: removed "noexec" from tmpfs options for /tmp ramdisk setup in fstab
Moral of the story: be mindful of how you configure things, because an old configuration can ruin a new package installation or functionality.
Last edited by CPUnltd (2011-01-24 22:09:34)==> Starting make...
patching file Makefile
Hunk #1 succeeded at 165 (offset 11 lines).
Hunk #2 succeeded at 459 (offset 19 lines).
./setup.sh: line 47: ./system.tmp: Permission denied
*** create templates.sed
*** create version.h
/bin/bash: ./gen-template.sh: Permission denied
make: *** [version.h] Error 126
Aborting...
The build failed.
==> Starting build()...
gcc -march=x86-64 -mtune=generic -O2 -pipe -Wall -DLARGE_FILES -D_FILE_OFFSET_BITS=64 -Ilibwbfs -I. -pthread -I/usr/include/glib-2.0 -I/usr/lib/glib-2.0/include -I/usr/include/libglade-2.0 -I/usr/include/gtk-2.0 -I/usr/include/libxml2 -I/usr/lib/gtk-2.0/include -I/usr/include/atk-1.0 -I/usr/include/cairo -I/usr/include/gdk-pixbuf-2.0 -I/usr/include/pango-1.0 -I/usr/include/pixman-1 -I/usr/include/freetype2 -I/usr/include/libpng14 -c -o file2h.o file2h.c
gcc -o file2h file2h.o
./file2h wbfs_gui_glade.h wbfs_gui.glade
make: execvp: ./file2h: Permission denied
make: *** [wbfs_gui_glade.h] Error 127
Aborting...
The build failed.
==> Starting make...
/tmp/packerbuild-1000/linphone-git/linphone-git/PKGBUILD: line 39: ./autogen.sh: Permission denied
Aborting...
The build failed.
/tmp/packerbuild-1000/mediastreamer-git/mediastreamer-git/PKGBUILD: line 35: ./autogen.sh: Permission denied
Aborting...
The build failed.
==> Starting make...
/tmp/packerbuild-1000/ortp-git/ortp-git/PKGBUILD: line 34: ./autogen.sh: Permission denied
Aborting...
The build failed. -
Permission Denied ! { SOLVED }
Well I 've gone and done it again somehow and would appreciate some help ;
[wesley@ratdog ~]$ nano /etc/pacman.d/mirrorlist
[wesley@ratdog ~]$ cd /etc/pacman.d
[wesley@ratdog pacman.d]$ cp mirrorlist mirrorlist.backup
cp: cannot create regular file `mirrorlist.backup': Permission denied
[wesley@ratdog pacman.d]$
Wanted to run rankmirror and got the above instead ( http://tinyurl.com/36gl8l )
Yaourt , Powerpill and Pacman all complaining .
Here's Powerpills output for example , (this is to be expected but with a new error message ! ) ;
[wesley@ratdog ~]$ powerpill -Syu
:: Synchronizing package databases...
error: failed retrieving file 'testing.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'testing.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'testing.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'testing.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'testing.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'testing.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'testing.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'testing.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'testing.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'testing.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'testing.db.tar.gz' from mirror.rit.edu : Not Found
downloading testing.db.tar.gz...
error: failed retrieving file 'core.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'core.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'core.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'core.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'core.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'core.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'core.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'core.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'core.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'core.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'core.db.tar.gz' from mirror.rit.edu : Not Found
downloading core.db.tar.gz...
error: failed retrieving file 'extra.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'extra.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'extra.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'extra.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'extra.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'extra.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'extra.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'extra.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'extra.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'extra.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'extra.db.tar.gz' from mirror.rit.edu : Not Found
downloading extra.db.tar.gz...
error: failed retrieving file 'community-testing.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'community-testing.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community-testing.db.tar.gz' from mirror.rit.edu : Not Found
downloading community-testing.db.tar.gz...
error: failed retrieving file 'community.db.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirror.cs.vt.edu : Not Found
error: failed retrieving file 'community.db.tar.gz' from mirrors.easynews.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirrors.easynews.com : Not Found
error: failed retrieving file 'community.db.tar.gz' from ftp.archlinux.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirrors.gigenet.com : Not Found
error: failed retrieving file 'community.db.tar.gz' from ftp.gtlib.gatech.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from www.gtlib.gatech.edu : Not Found
error: failed retrieving file 'community.db.tar.gz' from mirrors.hosef.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirrors.hosef.org : Not Found
error: failed retrieving file 'community.db.tar.gz' from ibiblio.org : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from distro.ibiblio.org : Not Found
error: failed retrieving file 'community.db.tar.gz' from archlinux.linuxfreedom.com : Not Found
error: failed retrieving file 'community.db.tar.gz' from locke.suu.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from lug.mtu.edu : Not Found
error: failed retrieving file 'community.db.tar.gz' from mirrors.xmission.com : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirrors.xmission.com : Not Found
error: failed retrieving file 'community.db.tar.gz' from mirror.rit.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'community.db.tar.gz' from mirror.rit.edu : Not Found
downloading community.db.tar.gz...
archlinuxfr is up to date
archrepo is up to date
archstuff is up to date
arch-games is up to date
error: no write permissions to any of the following cache directories:
/var/cache/pacman/pkg
I haven't been mucking around in there but something is amiss , where to start ? Permissions issue if fixed would go a long way to resolving this me thinks . But how did the cache directory permissions get changed
I've not a clue .
Any and all help appreciated , I apologize for the long post and Thank You .
Last edited by wesley_of_course (2010-01-19 01:24:07)You are so right , ( not using sudo ) , expected a warning I guess .
Anyways I deleted mirrorlist , repopulated it and ran reflector .
http://dpaste.com/147220/
[wesley@ratdog ~]$ yaourt -Syy
:: Synchronizing package databases...
testing 9.9K 178.2K/s 00:00:00 [#####################] 100%
core 36.0K 210.0K/s 00:00:00 [#####################] 100%
extra 440.9K 174.1K/s 00:00:03 [#####################] 100%
community-testing 1.9K 41.2M/s 00:00:00 [#####################] 100%
community 374.4K 381.3K/s 00:00:01 [#####################] 100%
archlinuxfr 24.1K 56.4K/s 00:00:00 [#####################] 100%
archrepo 25.4K 45.2K/s 00:00:01 [#####################] 100%
arch-games 31.4K 128.1K/s 00:00:00 [#####################] 100%
[wesley@ratdog ~]$ sudo pacman -Syy
:: Synchronizing package databases...
testing 9.9K 99.3K/s 00:00:00 [#####################] 100%
core 36.0K 166.6K/s 00:00:00 [#####################] 100%
extra 440.9K 392.3K/s 00:00:01 [#####################] 100%
community-testing 1.9K 27.5M/s 00:00:00 [#####################] 100%
community 374.4K 300.3K/s 00:00:01 [#####################] 100%
archlinuxfr 24.1K 55.9K/s 00:00:00 [#####################] 100%
archrepo 25.4K 45.5K/s 00:00:01 [#####################] 100%
arch-games 31.4K 131.8K/s 00:00:00 [#####################] 100%
[wesley@ratdog ~]$ sudo powerpill -Syy
:: Synchronizing package databases...
testing 9.9K 185.2K/s 00:00:00 [#####################] 100%
core 36.0K 123.5K/s 00:00:00 [#####################] 100%
extra 440.9K 366.6K/s 00:00:01 [#####################] 100%
community-testing 1.9K 25.2M/s 00:00:00 [#####################] 100%
community 374.4K 375.2K/s 00:00:01 [#####################] 100%
archlinuxfr 24.1K 42.7K/s 00:00:01 [#####################] 100%
archrepo 25.4K 45.0K/s 00:00:01 [#####################] 100%
arch-games 31.4K 131.1K/s 00:00:00 [#####################] 100%
Thanks for the quick reply . I apologize for not investigating further before posting . I was freak'n !
Thanks dcc24 and reed9 !
Last edited by wesley_of_course (2010-01-19 01:32:52)
Maybe you are looking for
-
Doing something at a specific time of day
Hi all, Basically what I am doing is an alarm clock, to wake me up to some MP3s. It all works fine. My only concern is the following: private Thread tTimeCheck = new Thread() { public void run () { while (true) {
-
hi, What are steps to create a production order thanks
-
I upgraded from an SP PowerMac G4 1.25 to this MacPro 8 core beast. I do HDV video work and use After Effects a lot. The Migration Assistant from my G4 to the MacPro went really well. I did not lose anything and all of my settings were in place. The
-
My hp notebook 2000 wont startup
when i try to start my hp notebook 2000 it goes to automatic repair and cannot complete that and says errorr. I have windows 7 operation system on a flash drive and I need to know how i could re install windows on the computer. The screen is cracked
-
Hi all, I'm using TOAD 9.5.0.31 (commercial!) and TNSNAMES for my connection is SOFTWARE\ORACLE\KEY_ORACLIENT10G_HOME1 ORACLE_HOME_NAME: OraClient10g_home1 ORACLE_HOME: C:\oracle\product\10.2.0\client_1 ORACLE_SID: NLS_LANG: ITALIAN_ITALY.WE8MSWIN125