[solved] mic on OSS4 not working
mic on OSS4 not working
I moved from ALSA to OSS4. Sound quality is (or it's my imagination) better. But microphone not working. I use Skype, Audacity, ossrecord... still nothing. Ossinfo show three record devices, ossmix - all record volume up , no mute. Ossrecord -d device(1,2,3) records only silence.
Sorry for my language, thanks for any help ...
Last edited by tommykr (2009-03-15 16:19:01)
It too me a good while and lots of trial and error to get recording working with oss, you need to set the mode to input on the recording sources (maybe you are using and HD Audio codec, you didn't say). Also if you have an internal mic and you are trying to use and external one you may need to adjust the recording volume of the internal one to zero otherwise the two will interfere.
Here's my settings on ossxmix (yours will probably be different)
Also while testing try to keep your payback volume low because you may set things in a way it will have positive feedback and you will get a very loud playback volume.
Similar Messages
-
Sound is off in iphone 4.. Speaker mic all sound not working in iphone 4.. What i do? Any help me!!!!
Get a new SIM from your carrier.
-
[SOLVED] Direct Rendering is not working with Catalyst 8.6-1.
I own an ATI Radeon X1300, and everything was working flawlessly with Catalyst 8.5-1, and when I updated the drivers, DRI stopped working. It has happened with me in the past, and the only solution I had found then was to downgrade the drivers. I appreciate your help.
Here is my /etc/X11/Xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 338 270 # 1280x1024 96dpi
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Here is my /var/log/Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux localhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 23 13:57:45 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev f3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev f2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,812a rev f3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:01:0: chip 1106,3044 card 1043,81fe rev c0 class 0c,00,10 hdr 00
(II) PCI: 05:00:0: chip 1002,7187 card 17ee,7187 rev 00 class 03,00,00 hdr 80
(II) PCI: 05:00:1: chip 1002,71a7 card 17ee,7186 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:9:0), (0,1,1), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:13:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:14:0), (0,5,5), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(5:0:0) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] rev 0, Mem @ 0xd0000000/28, 0xfdef0000/16, I/O @ 0x9c00/8, BIOS @ 0xfdec0000/17
(--) PCI: (5:0:1) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (Secondary) rev 0, Mem @ 0xfdee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 05:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x7187) found
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x9fa1880
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[20] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[21] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[32] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[33] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[34] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[35] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "Radeon X1300/X1550 Series" (Chipset = 0x7187)
(--) fglrx(0): (PciSubVendor = 0x17ee, PciSubDevice = 0x7187)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV515
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 5:0.0.
(II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: 13 Serial#: 1850
(II) fglrx(0): Year: 2005 Week: 9
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608
(II) fglrx(0): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 310 x 230 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Serial No: 09301850
(II) fglrx(0): Monitor name: Philips 107Et
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 72 kHz, PixClock max 110 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c13003a070000
(II) fglrx(0): 090f0103682018782a4f29a057499b26
(II) fglrx(0): 10484ca4420031594559615981800101
(II) fglrx(0): 010101010101ea240060410028303060
(II) fglrx(0): 130036e61000001e000000ff00303933
(II) fglrx(0): 30313835300a20202020000000fc0050
(II) fglrx(0): 68696c697073203130374574000000fd
(II) fglrx(0): 0032a01e480b000a20202020202000b2
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 40 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(**) fglrx(0): Display dimensions: (338, 270) mm
(WW) fglrx(0): Probed monitor is 320x240 mm, using Displaysize 338x270 mm
(**) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 255 MB
(II) fglrx(0): [pcie] 261120 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[7] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[8] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[9] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[10] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[11] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[12] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[13] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x00009c00 - 0x00009cff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[24] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[25] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[26] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[27] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[28] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[29] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[30] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[31] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[32] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[33] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[34] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[35] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[36] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[37] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[38] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0xac000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xab000 at 0xb7653000
(II) fglrx(0): [drm] Closed DRM master.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
(==) fglrx(0): Write-combining range (0xd0000000,0x10000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "abnt2"
(**) Keyboard0: XkbModel: "abnt2"
(**) Option "XkbLayout" "br"
(**) Keyboard0: XkbLayout: "br"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
Last edited by DarkForte (2008-06-23 22:40:05)From your Xorg.0.log:
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You have to quit X, then rmmod and modprobe the kernel module - you're still using the old one. (a reboot would technically fix it too)
# rmmod fglrx
# modprobe fglrx
# dmesg | tail
The dmesg output should say you've successfully loaded the 8.501 driver. -
[SOLVED] DPMS screen off not working with xorg 1.16.0, gnome 3
After the update of xorg into 1.16.0-2, screen is not turned off by DPMS in GNOME.
I also tried an manual command:
$ xset dpms force off
but it's not working.
In other WM, this command is working.
With xorg 1.15.2 and gnome 3, there is not this problem.
When I entered the command, the screen turned off for a couple of seconds and turned back on.
Last edited by esrevinu (2014-07-22 23:35:07)Updating xf86-video-intel to 2.99.912-4 solved the problem.
Thanks. -
Internal Mic and Bluetooth not working together at the same time
Okay.. so I've been noticing this happen alot lately. Whenever I have my usb wacom tablet plugged in (which is almost always), there would be no internal mic input and bluetooth would become "not unavailable". Also, even when I try an external mic, there was no input. Could this be a coincidence or some related usb-bluetooth problem? Could it be my audio input or tablet driver problem?
I've used my mic to skype before I had installed the tablet. Also before I used garage band to record my sister's guitar with an external mic, there was no problem at all, and of course I didn't have my tablet plugged in at the time. Recorded a whole hours worth of music, and didn't have any problems.
Today.. I checked to see if my internal mic was working before I launched skype, and it was working perfectly, and I also noticed my bluetooth was available (didn't test it though). Then I went on skype talked to friend for about 20min, and suddenly the audio stop working. I had my tablet plugged in from earlier today. I restarted my macbook (with no tablet plugged in) and still mic input isn't working. I tried and external mic, but still nothing. I tried uninstalling skype, still nothing.
This is not the first time this happened, I noticed it would somehow fix itself after a few days every time, and mic and bluetooth would start working again out of nowhere. Which makes it even more weird.
Need help pleaseee!
PS. I tried getting someone to fix it before(a few months ago- I don't really use my mic or bluetooth much), but when I brought it in and started up my mac, at that time it was working again. But now it isn't working =(UPDATE: I just noticed my bluetooth was no longer "unavailable", so I quickly went into system preferences, and noticed that my internal mic input had some input! Very weak though, only 1-2 bars. So what does this mean?
-
Need help on Audigy 2, mic port is not work
Well, here it goes. I just recently formated and reinstalled windows. I did the dri'ves for my card, got all the sound out puts working. When I go to use my mic, I can not get it to even work. I changed my mic's out and still got nothing. I looked at all the input opitions, messed with mute and unmute still nothing.
I would gladly be greatful if someone could help to releave this problem of mine.
Thanks!Those drivers are fine for your card.
Onboard sound is a separate sound 'card' which is integrated into motherboard ... it normally becomes disabled automatically when another audio device is present but not all systems does this w/o changing some BIOS settings regarding Onboard Audio.
You can disable the onboard sound through "Device manager" by just selecting "disable"? on device properties for onboard sound.
Did you run the mmsys.cpl and checked if those play and recording devices are correcttly set ... also, as you maybe don't? have Creative Surround Mixer available, then did you enable the Mic port (start run... sndvol32.exe (sndvol32.exe /R for recording options)?
Are you sure you have connected the microphone correctly (check on the user's guide (you'll find one from downloads if you have lost your CD))?
jutapa
Message Edited by jutapa on 07-3-2008 0:09 AM -
[solved] NFS client will not work correctly
I have all my $HOME on an NFS Server. So long I used suse and debian, now I want switch to arch but the nfs-client ist not working correctly:
I start "portmap nfslock nfsd netfs" over rc.conf. When I do a "rpcinfo -p <ip-arch-system>" I got the following
stefan:/home/stefan # rpcinfo -p 192.168.123.3
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100021 1 tcp 48988 nlockmgr
100021 3 tcp 48988 nlockmgr
100021 4 tcp 48988 nlockmgr
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 3 udp 891 mountd
100005 3 tcp 894 mountd
As you see "status" is missing, so the statd is not running. It sould look like the result on my suse box:
stefan:/home/stefan # rpcinfo -p 192.168.123.2
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32768 status
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100024 1 tcp 35804 status
100021 1 tcp 35804 nlockmgr
100021 3 tcp 35804 nlockmgr
100021 4 tcp 35804 nlockmgr
There is the "status" line and so the statd is running.
How can I fix that problem, so that statd ist running on my arch box too?
Last edited by stka (2007-06-10 15:59:48)The Problem ist solved.
I use ldap for authentication. During the setup of the ldapclient I copied the nsswitch.ldap to nsswitch.conf. But the line for "hosts:" was:
hosts: dns ldap
but in my dns ist no localhost entry. After I changed this line to:
hosts: files dns ldap
everything was ok. The statd is now running and I can start to migrate to archlinux ;-) -
Headphone and mic jacks do not work
I disabled the onboard audio drivers to install an Audigy 2ZS board in my new Dimension 900. Now the Dell factory installed mic and headphone jacks on the front of the computer do not work. I'm assuming thats because I disabled the onboard drivers? Any way to get them working with the 2ZS card? I understand that the mic and headphone jacks have cables that can be hooked to a card. Does the 2ZS support this kind of hookup?
ThanksHey everyone
It's very possible to connect your front jacks to Audigy. I'm currently using my headphones that way.
Here is what you do:
. On top you audigy card
<IMG src="http://images0.fotki.com/v203/photos//2786/2503093/CreativeAudigy2ZS-vi.jpg">
2. Audigy pin assignments (connect you front panel cable to things marked in red)
AUDIGY FRONT PANEL CONNECTIONS======================================= =========================
- Analog Ground< 2 - Headphone Out (Left) 3 - Audio Backpanel Mute -- mute (ground) the backpanel when using headphones< 4 - Headphone Out (Right) 5 - same as #3< 6 - Mic Input 7 - key pin (shouldn't be there) 8 - VREF out -- voltage reference for Mic 9 - MIC IN MUTE -- ground when mic isn't plugged in, +2VDC when mic is plugged in0 - Audio cable detect -- will be ground when headphones are plugged in (not used)
I'm still working out the kinks. For instance, if you've ever had an Audigy Dri've (comes with Platinum and Pro version of Audigy), you know that when you plug in headphones, sound to speakers mutes and Creative Speaker Settings panel automatically switches to "Headphones". That was nice. I don't know if it's possible this way.
Enjoy,
Igor -
[Solved] Wacom pen buttons not working
Hi, this is probably simple to fix, but I don't understand everything well enough to get it set up. I have a Fujitsu T5010 with internal Wacom tablet. The Wacom drivers are installed. I can use the pen to move the pointer, and click. However, the buttons on the side of the pen do not work. Also, the eraser end of the pen seems to register as an ordinary single click, rather than a separate input.
Here are some relevant outputs:
$ xsetwacom get "Serial Wacom Tablet FUJ02e5 stylus" all
Option "Area" "0 0 28808 18080"
'Button' requires exactly 1 value(s).
Option "ToolDebugLevel" "0"
Option "TabletDebugLevel" "0"
Option "Suppress" "2"
Option "RawSample" "4"
Option "PressureCurve" "0 0 100 100"
Option "Mode" "Absolute"
Option "TabletPCButton" "on"
Option "Touch" "off"
Option "Gesture" "off"
Option "ZoomDistance" "0"
Option "ScrollDistance" "0"
Option "TapTime" "250"
Property 'Wacom Proximity Threshold' does not exist on device.
Option "Rotate" "none"
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Option "Threshold" "27"
Option "ToolType" "325"
Option "ToolSerial" "0"
Option "ToolID" "0"
Option "ToolSerialPrevious" "0"
Option "BindToSerial" "0"
Option "TabletID" "144"
and
$ xsetwacom get "Serial Wacom Tablet FUJ02e5 eraser" all
Option "Area" "0 0 28808 18080"
'Button' requires exactly 1 value(s).
Option "ToolDebugLevel" "0"
Option "TabletDebugLevel" "0"
Option "Suppress" "2"
Option "RawSample" "4"
Option "PressureCurve" "0 0 100 100"
Option "Mode" "Absolute"
Property 'Wacom Hover Click' does not exist on device.
Option "Touch" "off"
Option "Gesture" "off"
Option "ZoomDistance" "0"
Option "ScrollDistance" "0"
Option "TapTime" "250"
Property 'Wacom Proximity Threshold' does not exist on device.
Option "Rotate" "none"
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Option "Threshold" "27"
Option "ToolType" "379"
Option "ToolSerial" "0"
Option "ToolID" "0"
Option "ToolSerialPrevious" "0"
Option "BindToSerial" "0"
Option "TabletID" "144"
Also, I have no /etc/X11/xorg.conf, but I do have a /etc/X11/xorg.conf.d/50-wacom.conf, which looks like
$ cat /etc/X11/xorg.conf.d/50-wacom.conf
Section "InputClass"
Identifier "Wacom class"
MatchProduct "Wacom|WACOM|Hanwang|PTK-540WL"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection
Section "InputClass"
Identifier "Wacom serial class"
MatchProduct "Serial Wacom Tablet"
Driver "wacom"
EndSection
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
EndSection
# Waltop tablets
Section "InputClass"
Identifier "Waltop class"
MatchProduct "WALTOP"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection
# N-Trig Duosense Electromagnetic Digitizer
Section "InputClass"
Identifier "Wacom N-Trig class"
MatchProduct "HID 1b96:0001|N-Trig Pen"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
Option "Button2" "3"
EndSection
I am running 64-bit Arch, installed only a month ago (so completely systemd), and fully up to date as of last night.
Last edited by khelar (2012-12-13 19:03:54)Never mind, I solved my own issue. In my /etc/X11/xorg.conf.d/50-wacom.conf, I modified the following section
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
EndSection
to read
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
Option "Button1" "1"
Option "Button2" "2"
Option "Button3" "3"
EndSection -
[SOLVED] cat6500 vlan filtering not working
Hello!
I have cat 6500 with SUP32-GE-3B/MSFC2A/PFC3B, s3223-adventerprisek9-mz.122-33.SXJ6.bin,
and WS-X6148-GE-TX module.
And I have a couple of 3750G.
On all of 3750G there is a broadcast filtering of VLAN 4000, and it's working:
mac access-list extended badhosts
permit any host ffff.ffff.ffff
vlan access-map dropbad 10
action drop
match mac address badhosts
vlan access-map dropbad 20
action forward
vlan filter dropbad vlan-list 4000
Then i copy this config to 6500, and it's not working. I configured two ports, one is switchport access vlan 4000 and other is switchport capture allowed vlan 4000, and i see on both ports same broadcast traffic. Filter is working, but packets are not dropping. I've tried to find something in manual, but found only about platform cwan acl software-switched, enabled it, nothing changed.
cat6500# sh vlan filter
VLAN Map dropbad:
Configured on VLANs: 4000
Active on VLANs: 4000i think i solve the problem: to make vlan filtering to work on 6500, i've added:
# conf t
(config)# int vlan 4000
(config-if)# no shut
(config-if)# mac packet-classify
Now, how to mark this question answered? -
[SOLVED] Xorg and keyboard not working after upgrade.
Hi guys,
after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
Any hint?
How do you recover a system once it's gone like this? Many thanks in advance.
J
Last edited by ifsixwasnine (2013-12-23 13:58:16)WonderWoofy wrote:
I wouldn't necessarily call this [SOLVED]. At best I would probably mention that you found a workaround. The addition of '(downgrade)' likely makes it fine, but just FYI for future threads. There are two reasons for this. One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
Just my 1.46¢
You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
1. Chrooted into the system
2. Wiped /boot
3. Re-installed grub
4. Re-installed linux kernel
5. Re-created grub.cfg
6. ???
7. Profit
I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout. -
[Solved (kind of)] Suspend not working after reinstall
Hi folks.
I did a reinstall 2 days ago and since then suspend / resume after a suspend to ram is not working. (Thinkpad x200)
As a desktop i use kde4, i also tried a dbus suspend and a pm-suspend without any X running.
Following happens using arch kernel:
- suspend is initiated and it immediately resumes;
Following happens when using my own kernel + config:
- suspend works (moon led starts blinking and finally the fan stops and the moon is the only led shining)
- after i open the lid or press the power button resume starts but the moon led is aktive, only the cpu fan starts running;
unfortunately i don't know how to log this process, as the display is not working and there's no log available of the resume process.
my rc.conf starts following daemons/programs:
metalog dbus thinkfan sshd
Thanks for any suggestions.
Last edited by gaelic (2011-02-14 11:58:06)Hey.
I add some information from the log files. State is unchanged. Both with slef baked kernel and arch kernel resume is not working
/var/log/pm-suspend.log:
Initial commandline parameters:
Sun Feb 13 12:19:46 CET 2011: Running hooks for suspend.
Running hook /usr/lib/pm-utils/sleep.d/00logging suspend suspend:
Linux angus 2.6.38-rc4 #11 SMP PREEMPT Sat Feb 12 17:37:33 CET 2011 i686 Intel(R) Core(TM)2 Duo CPU P8400 @ 2.26GHz GenuineIntel GNU/Linux
Module Size Used by
snd_hda_codec_conexant 29924 1
snd_hda_intel 17032 0
snd_hda_codec 47104 2 snd_hda_codec_conexant,snd_hda_intel
snd_pcm 48808 2 snd_hda_intel,snd_hda_codec
thinkpad_acpi 42892 0
iwlagn 130552 0
e1000e 107988 0
btusb 8568 0
snd_timer 13164 1 snd_pcm
cdc_acm 12256 0
snd_page_alloc 4876 2 snd_hda_intel,snd_pcm
total used free shared buffers cached
Mem: 3069852 363876 2705976 0 684 309004
-/+ buffers/cache: 54188 3015664
Swap: 2000088 0 2000088
/usr/lib/pm-utils/sleep.d/00logging suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/00powersave suspend suspend:
/usr/lib/pm-utils/sleep.d/00powersave suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/01grub suspend suspend:
/usr/lib/pm-utils/sleep.d/01grub suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/11netcfg suspend suspend:
/usr/lib/pm-utils/sleep.d/11netcfg suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend:
/usr/lib/pm-utils/sleep.d/49bluetooth suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/75modules suspend suspend:
/usr/lib/pm-utils/sleep.d/75modules suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/90clock suspend suspend:
/usr/lib/pm-utils/sleep.d/90clock suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend:
/usr/lib/pm-utils/sleep.d/94cpufreq suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/95led suspend suspend:
/usr/lib/pm-utils/sleep.d/95led suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend:
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/bios_version: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/bios_vendor: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/bios_date: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/sys_vendor: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/product_name: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/product_version: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/board_name: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/board_version: No such file or directory
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler: line 101: /sys/class/dmi/id/board_vendor: No such file or directory
Kernel modesetting video driver detected, not using quirks.
/usr/lib/pm-utils/sleep.d/98video-quirk-db-handler suspend suspend: success.
Running hook /usr/lib/pm-utils/sleep.d/99video suspend suspend:
kernel.acpi_video_flags = 0
/usr/lib/pm-utils/sleep.d/99video suspend suspend: success.
Sun Feb 13 12:19:46 CET 2011: performing suspend
So suspend seems to be working, at least i can't see any problem.
dmesg (with pm-debug activated):
7>PM: Adding info for No Bus:tty62
PM: Adding info for No Bus:tty63
pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: BAR 9: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.0: BAR 7: assigned [io 0x3000-0x3fff]
pci 0000:00:1c.1: BAR 7: assigned [io 0x4000-0x4fff]
pci 0000:00:1c.0: PCI bridge to [bus 02-02]
pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
pci 0000:00:1c.1: PCI bridge to [bus 03-03]
pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
pci 0000:00:1c.1: bridge window [mem 0xf2500000-0xf25fffff]
pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
pci 0000:00:1c.3: PCI bridge to [bus 05-0c]
pci 0000:00:1c.3: bridge window [io 0x2000-0x2fff]
pci 0000:00:1c.3: bridge window [mem 0xf0000000-0xf1ffffff]
pci 0000:00:1c.3: bridge window [mem 0xf2900000-0xf29fffff 64bit pref]
pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
pci 0000:00:1e.0: bridge window [io disabled]
pci 0000:00:1e.0: bridge window [mem disabled]
pci 0000:00:1e.0: bridge window [mem pref disabled]
pci 0000:00:1c.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
pci 0000:00:1c.0: setting latency timer to 64
pci 0000:00:1c.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
pci 0000:00:1c.1: setting latency timer to 64
pci 0000:00:1c.3: PCI INT D -> GSI 23 (level, low) -> IRQ 23
pci 0000:00:1c.3: setting latency timer to 64
pci 0000:00:1e.0: setting latency timer to 64
pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:00: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:00: resource 9 [mem 0xc0000000-0xfebfffff]
pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
pci_bus 0000:03: resource 1 [mem 0xf2500000-0xf25fffff]
pci_bus 0000:03: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
pci_bus 0000:05: resource 0 [io 0x2000-0x2fff]
pci_bus 0000:05: resource 1 [mem 0xf0000000-0xf1ffffff]
pci_bus 0000:05: resource 2 [mem 0xf2900000-0xf29fffff 64bit pref]
pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
pci_bus 0000:0d: resource 7 [mem 0x000d4000-0x000d7fff]
pci_bus 0000:0d: resource 8 [mem 0x000d8000-0x000dbfff]
pci_bus 0000:0d: resource 9 [mem 0xc0000000-0xfebfffff]
NET: Registered protocol family 2
IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
TCP: Hash tables configured (established 131072 bind 65536)
TCP reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
Simple Boot Flag at 0x35 set to 0x1
PM: Adding info for No Bus:mcelog
PM: Adding info for No Bus:msr0
PM: Adding info for No Bus:msr1
PM: Adding info for No Bus:cpu0
PM: Adding info for No Bus:cpu1
apm: BIOS not found.
PM: Adding info for No Bus:snapshot
PM: Adding info for event_source:cpu
PM: Adding info for event_source:breakpoint
PM: Adding info for event_source:software
highmem bounce pool size: 64 pages
squashfs: version 4.0 (2009/01/31) Phillip Lougher
Installing knfsd (copyright (C) 1996 [email protected]).
NTFS driver 2.1.30 [Flags: R/W].
PM: Adding info for No Bus:autofs
fuse init (API version 7.16)
PM: Adding info for No Bus:fuse
PM: Adding info for No Bus:btrfs-control
Btrfs loaded
msgmni has been set to 1710
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
io scheduler noop registered
io scheduler cfq registered (default)
pcieport 0000:00:1c.0: setting latency timer to 64
pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
PM: Adding info for pci_express:0000:00:1c.0:pcie08
pcieport 0000:00:1c.1: setting latency timer to 64
pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
PM: Adding info for pci_express:0000:00:1c.1:pcie08
pcieport 0000:00:1c.3: setting latency timer to 64
pcieport 0000:00:1c.3: irq 42 for MSI/MSI-X
PM: Adding info for pci_express:0000:00:1c.3:pcie08
PM: Adding info for No Bus:fbcon
intel_idle: MWAIT substates: 0x3122220
intel_idle: does not run on family 6 model 23
ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
PM: Adding info for No Bus:AC
ACPI: AC Adapter [AC] (off-line)
PM: Adding info for No Bus:input0
input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input0
ACPI: Lid Switch [LID]
PM: Adding info for No Bus:input1
input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input1
ACPI: Sleep Button [SLPB]
PM: Adding info for No Bus:input2
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
ACPI: Power Button [PWRF]
ACPI: acpi_idle registered with cpuidle
Monitor-Mwait will be used to enter C-1 state
Monitor-Mwait will be used to enter C-2 state
Monitor-Mwait will be used to enter C-3 state
Marking TSC unstable due to TSC halts in idle
PM: Adding info for No Bus:cooling_device0
PM: Adding info for No Bus:cooling_device1
PM: Adding info for No Bus:thermal_zone0
PM: Adding info for No Bus:hwmon0
thermal LNXTHERM:00: registered as thermal_zone0
ACPI: Thermal Zone [THM0] (44 C)
PM: Adding info for No Bus:thermal_zone1
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [THM1] (40 C)
PM: Adding info for No Bus:ptmx
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
PM: Adding info for platform:serial8250
PM: Adding info for No Bus:ttyS0
PM: Adding info for No Bus:BAT0
ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
ACPI: Battery Slot [BAT0] (battery present)
PM: Adding info for No Bus:ttyS1
PM: Adding info for No Bus:ttyS2
PM: Adding info for No Bus:ttyS3
PM: Adding info for No Bus:nvram
Non-volatile memory driver v1.3
Linux agpgart interface v0.103
agpgart-intel 0000:00:00.0: Intel GM45 Chipset
agpgart-intel 0000:00:00.0: detected gtt size: 524288K total, 262144K mappable
agpgart-intel 0000:00:00.0: detected 32768K stolen memory
PM: Adding info for No Bus:agpgart
agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[drm] Initialized drm 1.1.0 20060810
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: power state changed by ACPI to D0
i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
i915 0000:00:02.0: setting latency timer to 64
PM: Adding info for No Bus:controlD64
PM: Adding info for No Bus:card0
PM: Adding info for i2c:i2c-0
PM: Adding info for i2c:i2c-1
PM: Adding info for i2c:i2c-2
PM: Adding info for i2c:i2c-3
PM: Adding info for i2c:i2c-4
PM: Adding info for i2c:i2c-5
PM: Adding info for i2c:i2c-6
PM: Adding info for i2c:i2c-7
PM: Adding info for i2c:i2c-8
PM: Adding info for i2c:i2c-9
PM: Adding info for i2c:i2c-10
PM: Adding info for i2c:i2c-11
PM: Adding info for i2c:i2c-12
PM: Adding info for i2c:i2c-13
i915 0000:00:02.0: irq 43 for MSI/MSI-X
[drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[drm] Driver supports precise vblank timestamp query.
PM: Adding info for No Bus:card0-LVDS-1
PM: Adding info for No Bus:card0-VGA-1
PM: Adding info for i2c:i2c-14
PM: Removing info for i2c:i2c-14
PM: Adding info for No Bus:card0-HDMI-A-1
PM: Adding info for No Bus:card0-DP-1
PM: Adding info for i2c:i2c-14
PM: Adding info for i2c:i2c-15
PM: Removing info for i2c:i2c-15
PM: Adding info for No Bus:card0-HDMI-A-2
PM: Adding info for No Bus:card0-DP-2
PM: Adding info for i2c:i2c-15
PM: Adding info for No Bus:card0-DP-3
PM: Adding info for i2c:i2c-16
PM: Adding info for No Bus:fb0
PM: Adding info for No Bus:vtcon1
Console: switching to colour frame buffer device 160x50
fb0: inteldrmfb frame buffer device
drm: registered panic notifier
No ACPI video bus found
[drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
PM: Adding info for No Bus:7:0
PM: Adding info for No Bus:loop0
PM: Adding info for No Bus:7:1
PM: Adding info for No Bus:loop1
PM: Adding info for No Bus:7:2
PM: Adding info for No Bus:loop2
PM: Adding info for No Bus:7:3
PM: Adding info for No Bus:loop3
PM: Adding info for No Bus:7:4
PM: Adding info for No Bus:loop4
PM: Adding info for No Bus:7:5
PM: Adding info for No Bus:loop5
PM: Adding info for No Bus:7:6
PM: Adding info for No Bus:loop6
PM: Adding info for No Bus:7:7
PM: Adding info for No Bus:loop7
loop: module loaded
ahci 0000:00:1f.2: version 3.0
ahci 0000:00:1f.2: PCI INT B -> GSI 16 (level, low) -> IRQ 16
ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
ahci: SSS flag set, parallel bus scan disabled
ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc sxs
ahci 0000:00:1f.2: setting latency timer to 64
PM: Adding info for No Bus:ata1
PM: Adding info for No Bus:ata1
PM: Adding info for No Bus:link1
PM: Adding info for No Bus:link1
PM: Adding info for No Bus:dev1.0
PM: Adding info for No Bus:dev1.0
PM: Adding info for No Bus:ata2
PM: Adding info for No Bus:ata2
PM: Adding info for No Bus:link2
PM: Adding info for No Bus:link2
PM: Adding info for No Bus:dev2.0
PM: Adding info for No Bus:dev2.0
PM: Adding info for No Bus:ata3
PM: Adding info for No Bus:ata3
PM: Adding info for No Bus:link3
PM: Adding info for No Bus:link3
PM: Adding info for No Bus:dev3.0
PM: Adding info for No Bus:dev3.0
PM: Adding info for No Bus:ata4
PM: Adding info for No Bus:ata4
PM: Adding info for No Bus:link4
PM: Adding info for No Bus:link4
PM: Adding info for No Bus:dev4.0
PM: Adding info for No Bus:dev4.0
scsi0 : ahci
PM: Adding info for scsi:host0
PM: Adding info for No Bus:host0
scsi1 : ahci
PM: Adding info for scsi:host1
PM: Adding info for No Bus:host1
scsi2 : ahci
PM: Adding info for scsi:host2
PM: Adding info for No Bus:host2
scsi3 : ahci
PM: Adding info for scsi:host3
PM: Adding info for No Bus:host3
ata1: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826100 irq 44
ata2: SATA max UDMA/133 abar m2048@0xf2826000 port 0xf2826180 irq 44
ata3: DUMMY
ata4: DUMMY
PPP generic driver version 2.4.2
PM: Adding info for No Bus:ppp
PPP Deflate Compression module registered
PPP BSD Compression module registered
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1a.7: PCI INT D -> GSI 23 (level, low) -> IRQ 23
ehci_hcd 0000:00:1a.7: setting latency timer to 64
ehci_hcd 0000:00:1a.7: EHCI Host Controller
ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
ehci_hcd 0000:00:1a.7: debug port 1
ehci_hcd 0000:00:1a.7: irq 23, io mem 0xf2826c00
ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
PM: Adding info for usb:usb1
PM: Adding info for usb:1-0:1.0
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 6 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev1.1
PM: Adding info for No Bus:ep_00
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: power state changed by ACPI to D0
ehci_hcd 0000:00:1d.7: PCI INT D -> GSI 19 (level, low) -> IRQ 19
ehci_hcd 0000:00:1d.7: setting latency timer to 64
ehci_hcd 0000:00:1d.7: EHCI Host Controller
ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
ehci_hcd 0000:00:1d.7: debug port 1
ehci_hcd 0000:00:1d.7: irq 19, io mem 0xf2827000
ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
PM: Adding info for usb:usb2
PM: Adding info for usb:2-0:1.0
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 6 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev2.1
PM: Adding info for No Bus:ep_00
uhci_hcd: USB Universal Host Controller Interface driver
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
uhci_hcd 0000:00:1a.0: setting latency timer to 64
uhci_hcd 0000:00:1a.0: UHCI Host Controller
uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
uhci_hcd 0000:00:1a.0: irq 20, io base 0x00001860
PM: Adding info for usb:usb3
PM: Adding info for usb:3-0:1.0
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev3.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
uhci_hcd 0000:00:1a.1: setting latency timer to 64
uhci_hcd 0000:00:1a.1: UHCI Host Controller
uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001880
PM: Adding info for usb:usb4
PM: Adding info for usb:4-0:1.0
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev4.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: power state changed by ACPI to D0
uhci_hcd 0000:00:1a.2: PCI INT C -> GSI 22 (level, low) -> IRQ 22
uhci_hcd 0000:00:1a.2: setting latency timer to 64
uhci_hcd 0000:00:1a.2: UHCI Host Controller
uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
uhci_hcd 0000:00:1a.2: irq 22, io base 0x000018a0
PM: Adding info for usb:usb5
PM: Adding info for usb:5-0:1.0
hub 5-0:1.0: USB hub found
hub 5-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev5.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: power state changed by ACPI to D0
uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
uhci_hcd 0000:00:1d.0: setting latency timer to 64
uhci_hcd 0000:00:1d.0: UHCI Host Controller
uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
uhci_hcd 0000:00:1d.0: irq 16, io base 0x000018c0
PM: Adding info for usb:usb6
PM: Adding info for usb:6-0:1.0
hub 6-0:1.0: USB hub found
hub 6-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev6.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
uhci_hcd 0000:00:1d.1: setting latency timer to 64
uhci_hcd 0000:00:1d.1: UHCI Host Controller
uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
uhci_hcd 0000:00:1d.1: irq 17, io base 0x000018e0
PM: Adding info for usb:usb7
PM: Adding info for usb:7-0:1.0
hub 7-0:1.0: USB hub found
hub 7-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev7.1
PM: Adding info for No Bus:ep_00
uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
uhci_hcd 0000:00:1d.2: setting latency timer to 64
uhci_hcd 0000:00:1d.2: UHCI Host Controller
uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001c00
PM: Adding info for usb:usb8
PM: Adding info for usb:8-0:1.0
hub 8-0:1.0: USB hub found
hub 8-0:1.0: 2 ports detected
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:usbdev8.1
PM: Adding info for No Bus:ep_00
Initializing USB Mass Storage driver...
usbcore: registered new interface driver usb-storage
USB Mass Storage support registered.
i8042: PNP: PS/2 Controller [PNP0303:KBD,PNP0f13:MOU] at 0x60,0x64 irq 1,12
PM: Adding info for platform:i8042
ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
ata2: SATA link down (SStatus 0 SControl 300)
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
serio: i8042 KBD port at 0x60,0x64 irq 1
PM: Adding info for serio:serio0
serio: i8042 AUX port at 0x60,0x64 irq 12
PM: Adding info for serio:serio1
PM: Adding info for No Bus:mice
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
PM: Adding info for No Bus:psaux
mousedev: PS/2 mouse device common for all mice
PM: Adding info for No Bus:event0
PM: Adding info for No Bus:event1
PM: Adding info for No Bus:event2
ata1.00: ATA-8: HITACHI HTS543225L9SA00, FBEZC43C, max UDMA/133
ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
rtc_cmos 00:07: RTC can wake from S4
ata1.00: ACPI cmd ef/02:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd f5/00:00:00:00:00:a0 (unknown) filtered out
ata1.00: ACPI cmd ef/5f:00:00:00:00:a0 (unknown) succeeded
ata1.00: ACPI cmd ef/10:03:00:00:00:a0 (unknown) filtered out
ata1.00: configured for UDMA/133
scsi 0:0:0:0: Direct-Access ATA HITACHI HTS54322 FBEZ PQ: 0 ANSI: 5
PM: Adding info for scsi:target0:0:0
PM: Adding info for No Bus:rtc0
PM: Adding info for scsi:0:0:0:0
rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
i2c /dev entries driver
PM: Adding info for No Bus:i2c-0
PM: Adding info for No Bus:i2c-1
PM: Adding info for No Bus:i2c-2
PM: Adding info for No Bus:i2c-3
PM: Adding info for No Bus:i2c-4
PM: Adding info for No Bus:i2c-5
PM: Adding info for No Bus:i2c-6
PM: Adding info for No Bus:i2c-7
PM: Adding info for No Bus:i2c-8
PM: Adding info for No Bus:i2c-9
PM: Adding info for No Bus:i2c-10
PM: Adding info for No Bus:i2c-11
PM: Adding info for No Bus:i2c-12
PM: Adding info for No Bus:i2c-13
PM: Adding info for No Bus:i2c-14
PM: Adding info for No Bus:i2c-15
PM: Adding info for No Bus:i2c-16
i801_smbus 0000:00:1f.3: PCI INT A -> GSI 23 (level, low) -> IRQ 23
PM: Adding info for i2c:i2c-17
PM: Adding info for No Bus:i2c-17
Linux video capture interface: v2.00
usbcore: registered new interface driver uvcvideo
USB Video Class driver (v1.0.0)
PM: Adding info for platform:coretemp.0
PM: Adding info for No Bus:hwmon1
PM: Adding info for platform:coretemp.1
PM: Adding info for No Bus:input3
PM: Adding info for No Bus:0:0:0:0
PM: Adding info for No Bus:hwmon2
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
PM: Adding info for No Bus:0:0:0:0
sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
sd 0:0:0:0: [sda] Write Protect is off
sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
PM: Adding info for No Bus:8:0
PM: Adding info for No Bus:sg0
PM: Adding info for No Bus:sda
sd 0:0:0:0: Attached scsi generic sg0 type 0
PM: Adding info for No Bus:0:0:0:0
cpuidle: using governor ladder
PM: Adding info for No Bus:event3
cpuidle: using governor menu
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
hdaps: supported laptop not found!
hdaps: driver init failed (ret=-19)!
sda: sda1 sda2 sda3 sda4
PM: Adding info for No Bus:sda1
PM: Adding info for No Bus:sda2
PM: Adding info for No Bus:sda3
PM: Adding info for No Bus:sda4
ALSA device list:
sd 0:0:0:0: [sda] Attached SCSI disk
No soundcards found.
IPv4 over IPv4 tunneling driver
PM: Adding info for No Bus:tunl0
TCP cubic registered
NET: Registered protocol family 17
Bluetooth: L2CAP ver 2.15
Bluetooth: L2CAP socket layer initialized
Bluetooth: RFCOMM TTY layer initialized
Bluetooth: RFCOMM socket layer initialized
Bluetooth: RFCOMM ver 1.11
Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Bluetooth: BNEP filters: protocol multicast
Bluetooth: HIDP (Human Interface Emulation) ver 1.2
Registering the dns_resolver key type
Using IPI No-Shortcut mode
PM: Adding info for No Bus:cpu_dma_latency
PM: Adding info for No Bus:network_latency
PM: Adding info for No Bus:network_throughput
PM: Hibernation image not present or could not be loaded.
Magic number: 15:387:327
rtc_cmos 00:07: setting system clock to 2011-02-13 11:20:29 UTC (1297596029)
usb 2-4: new high speed USB device using ehci_hcd and address 2
PM: Adding info for usb:2-4
PM: Adding info for usb:2-4:1.0
PM: Adding info for usb:2-4:1.1
PM: Adding info for No Bus:ep_8a
PM: Adding info for usb:2-4:1.2
PM: Adding info for No Bus:ep_01
PM: Adding info for No Bus:ep_81
PM: Adding info for usb:2-4:1.3
PM: Adding info for No Bus:ep_89
PM: Adding info for usb:2-4:1.4
PM: Adding info for No Bus:ep_02
PM: Adding info for No Bus:ep_82
PM: Adding info for usb:2-4:1.5
PM: Adding info for No Bus:ep_8b
PM: Adding info for usb:2-4:1.6
PM: Adding info for No Bus:ep_8c
PM: Adding info for usb:2-4:1.7
PM: Adding info for No Bus:ep_87
PM: Adding info for usb:2-4:1.8
PM: Adding info for usb:2-4:1.9
PM: Adding info for No Bus:ep_85
PM: Adding info for usb:2-4:1.10
PM: Adding info for No Bus:ep_06
PM: Adding info for No Bus:ep_86
PM: Adding info for No Bus:usbdev2.2
PM: Adding info for No Bus:ep_00
IBM TrackPoint firmware: 0x0e, buttons: 3/3
PM: Adding info for No Bus:input4
input: TPPS/2 IBM TrackPoint as /devices/platform/i8042/serio1/input/input4
PM: Adding info for No Bus:mouse0
PM: Adding info for No Bus:event4
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
FAT: utf8 is not a recommended IO charset for FAT filesystems, filesystem will be case sensitive!
usb 4-2: new full speed USB device using uhci_hcd and address 2
UDF-fs: No partition found (1)
device label root devid 1 transid 1893 /dev/root
PM: Adding info for No Bus:btrfs-1
PM: Adding info for usb:4-2
PM: Adding info for usb:4-2:1.0
PM: Adding info for No Bus:ep_81
PM: Adding info for No Bus:ep_82
PM: Adding info for No Bus:ep_02
PM: Adding info for usb:4-2:1.1
PM: Adding info for No Bus:ep_83
PM: Adding info for No Bus:ep_03
PM: Adding info for usb:4-2:1.2
PM: Adding info for No Bus:ep_84
PM: Adding info for No Bus:ep_04
PM: Adding info for usb:4-2:1.3
PM: Adding info for No Bus:usbdev4.2
PM: Adding info for No Bus:ep_00
VFS: Mounted root (btrfs filesystem) readonly on device 0:10.
Freeing unused kernel memory: 352k freed
Write protecting the kernel text: 5504k
Write protecting the kernel read-only data: 1012k
udev[965]: starting version 165
Bluetooth: Generic Bluetooth USB driver ver 0.6
PM: Adding info for No Bus:hci0
PM: Adding info for No Bus:rfkill0
usbcore: registered new interface driver btusb
e1000e: Intel(R) PRO/1000 Network Driver - 1.2.20-k2
e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
e1000e 0000:00:19.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20
e1000e 0000:00:19.0: setting latency timer to 64
e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:
iwlagn: Copyright(c) 2003-2010 Intel Corporation
iwlagn 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
iwlagn 0000:03:00.0: setting latency timer to 64
iwlagn 0000:03:00.0: Detected Intel(R) WiFi Link 5100 AGN, REV=0x54
iwlagn 0000:03:00.0: device EEPROM VER=0x11e, CALIB=0x4
iwlagn 0000:03:00.0: Device SKU: 0Xb
iwlagn 0000:03:00.0: Tunable channels: 13 802.11bg, 24 802.11a channels
iwlagn 0000:03:00.0: irq 46 for MSI/MSI-X
PM: Adding info for No Bus:0000:03:00.0
cdc_acm 2-4:1.1: ttyACM0: USB ACM device
PM: Adding info for No Bus:ttyACM0
cdc_acm 2-4:1.3: ttyACM1: USB ACM device
PM: Adding info for No Bus:ttyACM1
cdc_acm 2-4:1.9: ttyACM2: USB ACM device
PM: Adding info for No Bus:ttyACM2
usbcore: registered new interface driver cdc_acm
cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
thinkpad_acpi: ThinkPad ACPI Extras v0.24
thinkpad_acpi: http://ibm-acpi.sf.net/
thinkpad_acpi: ThinkPad BIOS 6DET28WW (1.05 ), EC 7XHT21WW-1.03
thinkpad_acpi: Lenovo ThinkPad X200, model 7458Y11
PM: Adding info for platform:thinkpad_acpi
PM: Adding info for platform:thinkpad_hwmon
PM: Adding info for No Bus:hwmon3
thinkpad_acpi: detected a 8-level brightness capable ThinkPad
thinkpad_acpi: radio switch found; radios are enabled
PM: Adding info for No Bus:rfkill1
thinkpad_acpi: rfkill switch tpacpi_bluetooth_sw: radio is unblocked
PM: Adding info for No Bus:rfkill2
thinkpad_acpi: rfkill switch tpacpi_wwan_sw: radio is unblocked
PM: Adding info for No Bus:tpacpi::thinklight
Registered led device: tpacpi::thinklight
PM: Adding info for No Bus:tpacpi::power
Registered led device: tpacpi::power
PM: Adding info for No Bus:tpacpi::standby
Registered led device: tpacpi::standby
PM: Adding info for No Bus:tpacpi::thinkvantage
Registered led device: tpacpi::thinkvantage
PM: Adding info for No Bus:thinkpad_screen
PM: Adding info for No Bus:card29
PM: Adding info for No Bus:controlC29
thinkpad_acpi: Console audio control enabled, mode: monitor (read only)
PM: Adding info for No Bus:input5
input: ThinkPad Extra Buttons as /devices/platform/thinkpad_acpi/input/input5
PM: Adding info for No Bus:event5
PM: Removing info for No Bus:0000:03:00.0
iwlagn 0000:03:00.0: loaded firmware version 8.24.2.12
PM: Adding info for No Bus:phy0
PM: Adding info for No Bus:rfkill3
ieee80211 phy0: Selected rate control algorithm 'iwl-agn-rs'
PM: Adding info for No Bus:wlan0
PM: Adding info for No Bus:timer
PM: Adding info for No Bus:eth0
e1000e 0000:00:19.0: eth0: (PCI Express:2.5GB/s:Width x1) 00:1f:16:09:3e:a6
e1000e 0000:00:19.0: eth0: Intel(R) PRO/1000 Network Connection
e1000e 0000:00:19.0: eth0: MAC: 7, PHY: 8, PBA No: 1008FF-0FF
HDA Intel 0000:00:1b.0: PCI INT B -> GSI 17 (level, low) -> IRQ 17
HDA Intel 0000:00:1b.0: irq 47 for MSI/MSI-X
HDA Intel 0000:00:1b.0: setting latency timer to 64
PM: Adding info for No Bus:card0
PM: Adding info for No Bus:pcmC0D1p
PM: Adding info for No Bus:pcmC0D0p
PM: Adding info for No Bus:pcmC0D0c
PM: Adding info for No Bus:controlC0
device label data devid 1 transid 59471 /dev/sda4
PM: Adding info for No Bus:btrfs-2
device label data devid 1 transid 59471 /dev/sda4
Adding 2000088k swap on /dev/sda2. Priority:-1 extents:1 across:2000088k
PM: Adding info for No Bus:vcs10
PM: Adding info for No Bus:vcsa10
PM: Adding info for No Bus:vcs11
PM: Adding info for No Bus:vcsa11
PM: Adding info for No Bus:vcs12
PM: Adding info for No Bus:vcsa12
PM: Adding info for No Bus:vcs13
PM: Adding info for No Bus:vcsa13
PM: Adding info for No Bus:vcs14
PM: Adding info for No Bus:vcsa14
PM: Adding info for No Bus:vcs15
PM: Adding info for No Bus:vcsa15
PM: Adding info for No Bus:vcs16
PM: Adding info for No Bus:vcsa16
PM: Adding info for No Bus:vcs17
PM: Adding info for No Bus:vcsa17
PM: Adding info for No Bus:vcs18
PM: Adding info for No Bus:vcsa18
PM: Adding info for No Bus:vcs19
PM: Adding info for No Bus:vcsa19
PM: Adding info for No Bus:vcs2
PM: Adding info for No Bus:vcsa2
PM: Adding info for No Bus:vcs20
PM: Adding info for No Bus:vcsa20
PM: Adding info for No Bus:vcs21
PM: Adding info for No Bus:vcsa21
PM: Adding info for No Bus:vcs22
PM: Adding info for No Bus:vcsa22
PM: Adding info for No Bus:vcs23
PM: Adding info for No Bus:vcsa23
PM: Adding info for No Bus:vcs24
PM: Adding info for No Bus:vcsa24
PM: Adding info for No Bus:vcs25
PM: Adding info for No Bus:vcsa25
PM: Adding info for No Bus:vcs26
PM: Adding info for No Bus:vcsa26
PM: Adding info for No Bus:vcs27
PM: Adding info for No Bus:vcsa27
PM: Adding info for No Bus:vcs28
PM: Adding info for No Bus:vcsa28
PM: Adding info for No Bus:vcs29
PM: Adding info for No Bus:vcsa29
PM: Adding info for No Bus:vcs3
PM: Adding info for No Bus:vcsa3
PM: Adding info for No Bus:vcs30
PM: Adding info for No Bus:vcsa30
PM: Adding info for No Bus:vcs31
PM: Adding info for No Bus:vcsa31
PM: Adding info for No Bus:vcs32
PM: Adding info for No Bus:vcsa32
PM: Adding info for No Bus:vcs33
PM: Adding info for No Bus:vcsa33
PM: Adding info for No Bus:vcs34
PM: Adding info for No Bus:vcsa34
PM: Adding info for No Bus:vcs35
PM: Adding info for No Bus:vcsa35
PM: Adding info for No Bus:vcs36
PM: Adding info for No Bus:vcsa36
PM: Adding info for No Bus:vcs37
PM: Adding info for No Bus:vcsa37
PM: Adding info for No Bus:vcs38
PM: Adding info for No Bus:vcsa38
PM: Adding info for No Bus:vcs39
PM: Adding info for No Bus:vcsa39
PM: Adding info for No Bus:vcs4
PM: Adding info for No Bus:vcsa4
PM: Adding info for No Bus:vcs40
PM: Adding info for No Bus:vcsa40
PM: Adding info for No Bus:vcs41
PM: Adding info for No Bus:vcsa41
PM: Adding info for No Bus:vcs42
PM: Adding info for No Bus:vcsa42
PM: Adding info for No Bus:vcs43
PM: Adding info for No Bus:vcsa43
PM: Adding info for No Bus:vcs44
PM: Adding info for No Bus:vcsa44
PM: Adding info for No Bus:vcs45
PM: Adding info for No Bus:vcsa45
PM: Adding info for No Bus:vcs46
PM: Adding info for No Bus:vcsa46
PM: Adding info for No Bus:vcs47
PM: Adding info for No Bus:vcsa47
PM: Adding info for No Bus:vcs48
PM: Adding info for No Bus:vcsa48
PM: Adding info for No Bus:vcs49
PM: Adding info for No Bus:vcsa49
PM: Adding info for No Bus:vcs5
PM: Adding info for No Bus:vcsa5
PM: Adding info for No Bus:vcs50
PM: Adding info for No Bus:vcsa50
PM: Adding info for No Bus:vcs51
PM: Adding info for No Bus:vcsa51
PM: Adding info for No Bus:vcs52
PM: Adding info for No Bus:vcsa52
PM: Adding info for No Bus:vcs53
PM: Adding info for No Bus:vcsa53
PM: Adding info for No Bus:vcs54
PM: Adding info for No Bus:vcsa54
PM: Adding info for No Bus:vcs55
PM: Adding info for No Bus:vcsa55
PM: Adding info for No Bus:vcs56
PM: Adding info for No Bus:vcsa56
PM: Adding info for No Bus:vcs57
PM: Adding info for No Bus:vcsa57
PM: Adding info for No Bus:vcs58
PM: Adding info for No Bus:vcsa58
PM: Adding info for No Bus:vcs59
PM: Adding info for No Bus:vcsa59
PM: Adding info for No Bus:vcs6
PM: Adding info for No Bus:vcsa6
PM: Adding info for No Bus:vcs60
PM: Adding info for No Bus:vcsa60
PM: Adding info for No Bus:vcs61
PM: Adding info for No Bus:vcsa61
PM: Adding info for No Bus:vcs62
PM: Adding info for No Bus:vcsa62
PM: Adding info for No Bus:vcs63
PM: Adding info for No Bus:vcsa63
PM: Adding info for No Bus:vcs7
PM: Adding info for No Bus:vcsa7
PM: Adding info for No Bus:vcs8
PM: Adding info for No Bus:vcsa8
PM: Adding info for No Bus:vcs9
PM: Adding info for No Bus:vcsa9
wlan0: authenticate with 00:25:9c:3c:4d:5c (try 1)
wlan0: authenticated
wlan0: associate with 00:25:9c:3c:4d:5c (try 1)
wlan0: RX AssocResp from 00:25:9c:3c:4d:5c (capab=0x411 status=0 aid=2)
wlan0: associated
start_kdeinit (1748): /proc/1748/oom_adj is deprecated, please use /proc/1748/oom_score_adj instead.
Are there any suggestions where i should go from here? (with the official arch kernel its exactly the same story, no difference in the logs) -
[Problem Solved] On screen display not working on T60
I replace my xp with a Vista Business.
All the drivers are installed. But the on screen display is not working well. Nothing display when I press the volume up/down/mute button. However, other buttons like Fn+F3, Fn+F5 do display on screen.
Anyone knows how to solve this?
Thanks a lot.
Message Edited by szsy on 10-02-2008 08:11 PM
Solved!
Go to Solution.problem solved.
looks like I need to install a Lenovo System Interface Driver. This is just for ATI graphic card users and nVidia users don't need it.
Thanks a lot. -
[SOLVED] Internal Speaker (pcsp) not working
UPDATE: solved muting all Analog Loopback channels in alsamixer
Hi everybody,
i'm tuning the lucky arch installation on a DELL Studio XPS 13. No troubles in video card configuration, neither in wireless drivers, but i'm getting big problems with audio playback. I mean every kind of audio playback.
I firstly read out the docs and topics around here but couldn't find a solution. Alsaconf says ok, alsamixer channels activated and configuration stored, but audio playing software (kde sounds, juk, amarok, vlc, flashplugin) is not producing any sound. As these softwares are not complaining about audio matters, and the multimedia module in Kde Control is describing this only as not working, i suppose the cause must be pcsp (which i disabled rc.conf).
Some more info:
bash-3.2# lsmod | grep snd
snd_hda_codec_nvhdmi 2740 1
snd_hda_codec_idt 55732 1
snd_seq_oss 29888 0
snd_seq_midi_event 5972 1 snd_seq_oss
snd_seq 48176 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6080 2 snd_seq_oss,snd_seq
snd_hda_intel 25384 2
snd_hda_codec 60340 3 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6904 1 snd_hda_codec
snd_pcm_oss 38112 0
snd_pcm 67992 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 19260 2 snd_seq,snd_pcm
snd_page_alloc 8092 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14388 1 snd_pcm_oss
snd 51460 15 snd_hda_codec_idt,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6080 1 snd
bash-3.2# cat /etc/modprobe.conf
# /etc/modprobe.conf (for v2.6 kernels)
options snd-pcsp index=2
bash-3.2# cat /etc/modprobe.conf
# /etc/modprobe.conf (for v2.6 kernels)
options snd-pcsp index=2
Any help is really appreciated, thank you
Miche
Last edited by Miche (2009-05-03 09:48:53)mcover wrote:
snd-pcsp and pcspkr both claim the same hardware and are both responsible for making your machine "beep" - i disabled both of them. you don't need them for your audio-playback. looking for issues of your sound-output by suspecting snd-pcsp or pcspkr is a dead end.
getting sound can sometimes be an adventure, i had that problem before. but often it just turns out to be some well hidden mute switch in alsamixer or some volume settings. it might be a problem with kde4's sound server. i don't use kde4 on a regular basis, so i can't help too much with that (back when i used kde3 i had to configure aRts but kde4 discontinued aRts in favor of phonon).
absolutly needed quotation as in the end it has been discovered that in-activating Analog Loopback channels in alsamixer solved the problem
i'm not sure this was the unique step in order to get alsa working (i read and followed suggentions from many many forums and wikis) but finally i found a post where the problem for a sound blaster owner was solved disabling the iec958 channel. That was the input for a deeper research in alsamixer configuration.
Thank you very much. keep enjoyng archlinux.
Miche -
[solved] mouse and keyboard not working (and previous fix wont work)
i made a clean default setup with
arch
latest kernel - 2.6.29 i think
xorg 1.6.1
video-intel-legacy
on a 865G intel box + tried usb and ps2 keyboards + usb mouse
when i start X the mouse and keyboard dont work (and i have to hard reset the box) in all of the setups i tried. the AutoAddDevices fix suggested before does not work this time
- without xorg.conf
- with auto-generated xorg.conf (X -confogure)
- with the automatic conf +
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with tiny xorg.conf containing only
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with dbus/hal enabled and disabled in rc.conf
how i make it work
Last edited by ash (2009-04-30 19:01:41)the setup that works to me now is
automatic xorg.conf with the AutAddDevices False (disable hotplug) lines
dbus and hal enabled in deamons
this lines instruct xorg to use xf86-input-mouse/keyboard instead of evdev. ie it looks like with evdev there is no point in xf86-input-mouse/keyboard
Last edited by ash (2009-04-30 18:26:16)
Maybe you are looking for
-
SDHC card does nor work on Satellite A200-1J0 with a clean Vista install
Greetings, When I bought this notebook there was preinstalled Vista 32bit and as usual some Toshiba's drivers and software. As I remeber there was no problems with built in memory card reader, it was reading regular SD cards and also SDHC. One day I
-
Creation of new employee groups and sub groups
Hi All, What all the steps should I follow to create new employee groups and sub groups? and How many structures should I create for this? Its urgent pls....... Good replies will be rewarded!!!! Regards, Sita
-
Hi Guru, Please can one of you say guide me how can i control the deletion and recreation of the Purchase Requisitions during the MRP Run. I know its standard in SAP , but not sure where to control this setting. 1. How Generally the Firming of the Re
-
How to call a java program in javafx class(Urgent) and even vice versa
Hi all, Here I have two questions: 1) Please let me know how to call a javafx in java program... I tried with the following code but it is not working.. The below is the java program in which I made a call to the Fx program. FxMainLauncher.java impor
-
ITunes shows two sets of playlists after loading at school
I loaded three playlists worth of language material at school onto my iPod, and when I got home, I downloaded new songs and imported new songs, and then plugged my iPod into the computer. However, my computer displayed under my iPod in the playlist c