[SOLVED] Microphone does not work after fresh install

Hello all,
I just installed arch a week or so ago, everything is great except from
the fact that my microphone does not seem to work (at least with
skype)..
This is the output of amixer:
[jorge@flamingo ~]$ amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 57 [89%] [-5.25dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',1
Capabilities: pvolume pswitch penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [on]
Front Right: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'PCM',0
Capabilities: pvolume penum
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 183 [72%] [-14.40dB]
Front Right: Playback 183 [72%] [-14.40dB]
Simple mixer control 'Mic Jack Mode',0
Capabilities: enum
Items: 'Mic In' 'Line In'
Item0: 'Mic In'
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'IEC958 Default PCM',0
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'IEC958 Playback Source',0
Capabilities: enum
Items: 'Digital Playback' 'ADAT' 'Analog Mux 1' 'Analog Mux 2' 'Analog Mux 3'
Item0: 'Digital Playback'
Simple mixer control 'IEC958',1
Capabilities: pswitch pswitch-joined penum
Playback channels: Mono
Mono: Playback [off]
Simple mixer control 'Beep',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined penum
Playback channels: Mono
Limits: Playback 0 - 3
Mono: Playback 0 [0%] [-18.00dB] [off]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [on]
Front Right: Capture 14 [100%] [21.00dB] [on]
Simple mixer control 'Capture',1
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Capture',2
Capabilities: cvolume cswitch penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 14
Front Left: Capture 14 [100%] [21.00dB] [off]
Front Right: Capture 14 [100%] [21.00dB] [off]
Simple mixer control 'Digital',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 115 [96%] [27.50dB]
Front Right: Capture 115 [96%] [27.50dB]
Simple mixer control 'Input Source',0
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',1
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Input Source',2
Capabilities: cenum
Items: 'Mic' 'Front Mic' 'Digital Mic'
Item0: 'Mic'
Simple mixer control 'Mux',0
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
Simple mixer control 'Mux',1
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
Simple mixer control 'Mux',2
Capabilities: cvolume penum
Capture channels: Front Left - Front Right
Limits: Capture 0 - 4
Front Left: Capture 4 [100%] [40.00dB]
Front Right: Capture 4 [100%] [40.00dB]
[jorge@flamingo ~]$
The capture section seems to be ok.. However when I am using skype,
the people I call only hear a noise and nothing else. I confirmed that with
skype call testing service..
Moreover, the levels of the mixer are ok and nothing is muted.
Finally, the mic itself works fine, I dual boot with XP and I didn't have
any problems with skype there..
Please let me know what other information you need..
Many thanks in advance.
Last edited by geo909 (2011-02-23 01:23:28)

alterecco wrote:
If you are using alsa, then remember to go into alsamixer and turn up your microphone volumes and set a device as the capture device.
Basically, go to the capture pane (F4), navigate to the capture device you want to use, and press Space to toggle it on.
First of all, I'm so sorry for the late reply.. I didn't have access to a pc for a long time.
And actually your suggestion did the job! I don't believe it was something that simple,
I spent hours googling around and trying all sorts of stuff..
Thanks a lot!!!

Similar Messages

  • Flash player does not work after I installed it

    Flash player does not work after I installed it

    I'm using Mac Osx and my browser is Safari
    Date: Wed, 5 Feb 2014 00:41:29 -0800
    From: [email protected]
    To: [email protected]
    Subject: Flash player does not work after I installed
        Re: Flash player does not work after I installed it
        created by Mike M in Installing Flash Player - View the full discussion
    This is a user-to-user forum, NOT 24/7 support. You're "lucky" I happen to be up at 1:40 am to answer you.
    What OS are you using?
    http://mmonlinedesigns.com/images/os.png
    What browser?
    http://mmonlinedesigns.com/images/browsers.png
         Please note that the Adobe Forums do not accept email attachments. If you want to embed a screen image in your message please visit the thread in the forum to embed the image at http://forums.adobe.com/message/6087541#6087541
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/6087541#6087541
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/6087541#6087541. In the Actions box on the right, click the Stop Email Notifications link.
               Start a new discussion in Installing Flash Player at Adobe Community
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/thread/416458?tstart=0.

  • Microphone does not work after restarting computer

    I just received the Creative Xmod soundcard yesterday after using an Icemat siberia usb headset sound card for a couple months. The sound is a lot better with the creative soundcard however, if I restart my computer and go back into ventrilo, my microphone does not work. It doesnt make any sound when I talk into it (almost as if it muted itself) but it hasnt. I check my sound settings and everything is the way it should be.....but the mic isnt producing any sound. It is not my headphones that is causing the problem because I have never had this problem with my old icemat soundcard. I am currently using :
    Sennheiser PC350 headset
    Windows XP Home Edition
    The newest version of Ventrilo

    http://picsend.net/images/240403ventsetup.JPG
    That is how I have ventrilo setup. A friend of mine said I should Mux set to Record Control, but it only gives me the option for Wave In =/

  • Solved rEFInd does not work after update

    Hello.
    Today, I updated rEFInd with yaourt.
    After the update, I copied the new files in /boot/efi.
    I rebooted and now rEFInd does not work.
    The only message I got is:
    rEFInd - Initializing
    After 2-3 minutes, the computer reboots and I got the same error message.
    To boot, I had to use the UEFI shell.
    First of all, is there a log file for rEFInd?
    It is not easy at all to debug it when we don't have any error messages.
    After that, I did the procedure to install rEFInd in /boot/efi twice without any success.
    Do you know what to do to solve my problem?
    Thanks for your help.
    Last edited by antoyo (2012-11-07 23:29:55)

    @antoyo: The old one is compiled using gnu-efi-libs, the new one is compiled using Tianocore UDK2010.
    Full package: http://dl.dropbox.com/u/9710721/refind- … pkg.tar.xz
    Src package: http://dl.dropbox.com/u/9710721/refind- … src.tar.gz (will compile only in x86_64 system)

  • Spotlight not working after fresh install of Mac OS X

    Hi,
    I have erased and installed the Mac OS X on my powerbook and spotlight is not working. I have tried almost all the solutions provided on the forum.
    I have tried adding the root drive to the privacy section of the spotlight preferences but it doesn't list the drive at all.
    I have tried using spotless, Yasu, Cache out X, deleted the spotlight.plist file
    Nothing works! It should be working after a fresh install. My computer just came back after a hard drive replacement and the spotlight wasn't working even then. I thought a fresh install of the OS would help, but can't get it to work.
    Can anynody suggest anything? Your help would be highly appreciated.
    Thanks,
    Aditya

    Hi Tom,
    Thanks for the reply and the link.
    I re-installed the OS again! This time using the UNIX file system setting during installation. Then when I booted my computer, Spotlight worked like a dream. But then I connected my external firewire hard disk and it stopped working!
    Is there a work around for this, can I get spotlight to work again?
    Thanks,
    Aditya

  • [SOLVED] Empathy does not work after gnome upgrade

    Hey there,
    I have upgraded gnome from 2.26 to 2.28. Almost everything is perfect (in fact apps start faster than before) but empathy does not connect to msn or any other protocol.
    Any help would be appreciated.
    Tks
    Last edited by mmf1902 (2009-10-17 17:48:07)

    mmf1902 wrote:
    So now we have solved the problem:
    + I deleted all hidden folders and configuration files that belongs to empathy and telepathy
    + I deleted the mission-control folder
    And that's it. Everything is ok.
    Gracias mil.
    don't forget to mark the topic as solved
    p.s. did you check the permissions or did you just remove the files? for other people with the problem, you know.

  • IPad iMessage does not work after ios6 installed

    Tried setting and turn on iMessage also FaceTime sign out

    Just Reboot and sign in again to you apple account. If this may not work reset your nwtwork settings.

  • To Apple engineers: Home sharing and wifi sync not working after fresh install

    Have been using wifi sync and home sharing on my Macbook 5,1 since its early debut.
    Since Macbook 5,1 is old i am using it to stream MP4 files to my Apple TV.
    The functionality has been working fine throughout the OSX iterations; then came Mavericks.
    Now my iTunes library will not sync with Apple TV3, nor will my iPhone 5/iPad 3 wirelessly sync with my iTunes library.
    For some reason since upgrading to Mavericks the thing wont work under normal boot.
    Restarting in Safe mode solves the problem. Assuming it was some erroneous configuration i went through troubleshooting steps to try and resolve it.
    First i uninstalled any third party apps.
    Then i repaired, went through Maintenance and Cleaning of the system using Onyx
    Then i tried manually removing third party boot kexts from the System Library and user Library
    Then i tried reinstalling OSX via the recovery partition (cmd+r on boot time)
    Finally i tried a full system erase and reinstall via an external bootable Mavericks USB.
    After all these steps the problem persists.
    There should be no hardware failure since it works fine in Safe mode and doing a clean install verifies that there are no third party conflicts with the system since iTunes was executed immediately after booting up for the first time.
    This raises the concern that there seems to be some sort of system kext misconfiguration by the Apple engineers.
    When executing iTunes the following errors are being displayed in the system log (via Console):
    22/07/14 20:09:41,949 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 1
    22/07/14 20:09:41,954 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 2
    22/07/14 20:09:41,958 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 3
    22/07/14 20:09:41,962 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 4
    22/07/14 20:09:41,966 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 6
    22/07/14 20:09:41,970 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 7
    22/07/14 20:09:41,974 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 8
    22/07/14 20:09:41,978 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 9
    22/07/14 20:09:41,982 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 10
    22/07/14 20:09:41,987 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 11
    22/07/14 20:09:41,991 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 12
    22/07/14 20:09:41,995 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 13
    22/07/14 20:09:41,999 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 14
    22/07/14 20:09:42,004 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 15
    22/07/14 20:09:42,008 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 16
    22/07/14 20:09:42,012 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 17
    22/07/14 20:09:42,016 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 18
    22/07/14 20:09:42,020 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 19
    22/07/14 20:09:42,024 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 20
    22/07/14 20:09:42,028 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 21
    22/07/14 20:09:42,032 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 22
    22/07/14 20:09:42,036 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 23
    22/07/14 20:09:42,041 mDNSResponder[57]: ERROR: handle_resolve_request bad interfaceIndex 24
    22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980CD60 Christophoross-MacBook.local. (AAAA) that's already in the list
    22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91A980D1F0 2.0.6.6.4.5.E.F.F.F.2.1.3.2.2.0.0.0.0.0.0.0.0.0.0.0.0.0.0.8.E.F.ip6.arpa. (PTR) that's already in the list
    22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA016F60 Christophoross-MacBook.local. (Addr) that's already in the list
    22/07/14 20:09:43,034 mDNSResponder[57]: mDNS_Register_internal: ERROR!! Tried to register AuthRecord 00007F91AA0173F0 5.1.168.192.in-addr.arpa. (PTR) that's already in the list
    22/07/14 20:09:43,088 com.apple.usbmuxd[42]: LOCKDOWN_V2_BONJOUR_SERVICE_NAME is _apple-mobdev2._tcp,921707f2
    22/07/14 20:09:43,140 xpcd[196]: restored permissions (100600 -> 100700) on /Users/christophoros/Library/Containers/com.apple.MediaLibraryService/Container.plist
    22/07/14 20:09:43,466 com.apple.SecurityServer[14]: Session 100020 created
    I hope someone came across a similar issue and has some light to shed on the matter.
    This has been ongoing since Mavericks came out.
    Thanks for reading through

        Reset SMC.     http://support.apple.com/kb/HT3964
        Choose the method for:
        "Resetting SMC on portables with a battery you should not remove on your own"

  • Beats Audio fn-b button not working after fresh install of Win 8.1

    I have read here on this being a issue.  I have tried about 4 things with no success so I am posting this!
    I have the HP Envy beats Edition 14- 2166se Laptop running fully updated Win 8.1 and using The audio driver sp63555.
    Everything works including the beats audio program just can not get the fn - b button combo to active or deactive the beats audio function controler. Any help would be great!!!
    This question was solved.
    View Solution.

    Hi,
    In that case, try the following.
    Open windows Control Panel, open Programs and Features, right click the entry 'HP System Event Utility' and select Uninstall.
    When this has completed, restart the notebook and let Windows fully load for a few minutes.
    Then download and install the version HP QuickLaunch Software on the following link.
    http://h30642.www3.hp.com/pub/softpaq/sp56501-57000/sp56929.exe
    When this installation has completed, restart the notebook again and let Windows fully load before checking the fn+b combination.
    Regards,
    DP-K
    ****Click the White thumb to say thanks****
    ****Please mark Accept As Solution if it solves your problem****
    ****I don't work for HP****
    Microsoft MVP - Windows Experience

  • [SOLVED] Compass does not work after update.

    For those of you not familiar, Compass is a Ruby gem that works with SASS , another Ruby gem. SASS is a CSS preprocessor. Anyway, I had Compass working fine, now I've completely broken it. I didn't see anything on the announcements that I thought would affect me, nor did I see anything on the forums.
    When I try to run the command 'compass watch' which makes compass poll for changes, I get this:
    /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require': cannot load such file -- sass/script/node (LoadError)
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/lib/compass/sass_extensions/monkey_patches/browser_support.rb:1:in `<top (required)>'
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/lib/compass/sass_extensions/monkey_patches.rb:2:in `block in <top (required)>'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/lib/compass/sass_extensions/monkey_patches.rb:1:in `each'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/lib/compass/sass_extensions/monkey_patches.rb:1:in `<top (required)>'
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/lib/compass/sass_extensions.rb:9:in `<top (required)>'
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/lib/compass.rb:5:in `block in <top (required)>'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/lib/compass.rb:4:in `each'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/lib/compass.rb:4:in `<top (required)>'
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /usr/lib/ruby/site_ruby/2.1.0/rubygems/core_ext/kernel_require.rb:55:in `require'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/bin/compass:20:in `block in <top (required)>'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/bin/compass:8:in `fallback_load_path'
    from /home/joe/.gem/ruby/2.1.0/gems/compass-0.12.2/bin/compass:19:in `<top (required)>'
    from /home/joe/.gem/ruby/2.1.0/bin/compass:23:in `load'
    from /home/joe/.gem/ruby/2.1.0/bin/compass:23:in `<main>'
    From what I can tell, I have some sort of file path wrong. I added this to my ~/.bashrc file just like the wiki said:
    PATH="$(ruby -e 'puts Gem.user_dir')/bin:$PATH"
    Again, everything was fine but now it's not.
    Last edited by joetemp (2014-02-05 22:33:07)

    Oh no I know Compass isn't an official package. But Ruby is and I was using RubyGems as the 'package manager' to install Compass.
    I'm not at all trying to be a smartass but the reason I feel it belongs in the Pacman section is because everything I did... I did according to the wiki. Not a single AUR package is involved in this problem.
    See here:
    https://wiki.archlinux.org/index.php/ruby#RubyGems
    Last edited by joetemp (2014-02-05 23:29:49)

  • My wireless card does not work after re installing windows 8 !!

    I suppose my card manufacturer is realtek and my card driver is gemtek my network adapter driver I've downloaded and installed it my nothing happens. In my device manager there is no wireless card please help me!!!!!!
    My system says no wireless card detected my PC was dos based and when I installed windows 7 everything just went fine. After some days it was formatted and again I installed windows 7 ultimate but my wifi adapter and card was not in the device manager. Please help me!!

    my pc is lenovo c320 aio
    intel g630, 2gb ram, dvd r/w, realtek gbe ethernet controller, usb 2.0x5 ports, keyboard and mouse

  • SQl 2008 R2 Failover Cluster does not failover after fresh install

    I have installed a two node SQL Server 2008 R2 cluster. I used a Named Instance and the SQL Server and SQL Server Agent cluster resources are online on node 1. When I want to move the SQL Server group to node 2, the SQL Server resource fails to start (error
    1205 and 1069).
    I see in the application log that it is starting up database 'master'. After that I see: Cannot recover the master database. SQL Server is unable to run. Restore master from a full backup etc...
    It runs fine on node 1, so what goes wrong?

    Hello,
    Please verify DTC is configured correctly.
    http://msdn.microsoft.com/en-us/library/dd897479(BTS.10).aspx
    Please see the following resources also:
    http://technet.microsoft.com/en-us/library/cc773525(WS.10).aspx
    http://technet.microsoft.com/en-us/library/cc756225(WS.10).aspx
    http://technet.microsoft.com/en-us/library/cc773447(WS.10).aspx
    Hope this helps.
    Regards,
    Alberto Morillo
    SQLCoffee.com

  • Re: hp stream x360 touchscreen not working after fresh install

    Hi I am having the same issue and the solutions you have suggested seem not to work. Is there no where the driver for the touch screen is available as this seems like the basic issue and quite a common issue for anyone who clean installs their stream PC? I am happy to purchse a restore disc, however this doesn't seem to be available either in the support section. Can you please help! Thanks Fuzzbubble

    Hi  ,
    Thank you for visiting the HP Forums! A great place where you can find solutions for your issues, with help from the community! I have looked into your issue about your HP Stream x360  and  issues with the Touchscreen. Here is a link to troubleshoot the Touchscreen. In the link you will notice a configure the touch display. This is the section you will need. Do you see anything in the Device Manager that has a yellow question mark on it? I hope this helps. Thanks.

  • Microphone does not work in Facetime

    Hi
    I read other posts and in Maverik I didn't find simmilar problem, for most people their microphone does not work after few minutes, but in my case, microphone does not work at all in Facetime, so I can hear the other end, but they can not hear me! This happened after updating Mavericks.
    My Mac specs:
    Macbook Pro 2013
    OSx 10.9.1 (Mavericks)
    things I already tested:
    I tried to use headphone and without headphone, but it didn't make any difference
    Microphone works fine in Skype and other softwares (Audacity, YahooMessenger, etc.)
    Tried with WiFi and with Ethernet cable
    Internet speed is 2.3MBps
    Router's firewall does not have any restriction for certain ports
    Tried turning facetime Off and On
    Tried to call iPhone 5s, iPad2 and MacBook Pro each in different network and different countries!
    ... and finally searching internet for hours (which obviously came up with nothing)
    I'll be thankful if somebody help me through, all suggestions are welcome, so please don't hesitate to post.

    Same issue here....
    8-core Mac Pro, Lion, Original External iSight camera connected via FireWire 400 through the FireWire jack on the 23" Apple Cinema Display.
    Audio and video work fine using iChat and making video clips through any/all apps.
    However, using FaceTime.....incoming audio and video are fine, outgoing video is fine, but outgoing audio is missing.  Nobady can hear me.
    Sorry guys...you can't doll this one up or spin it in any other direction......it's a bug pure and simple.
    Feel free to fix it whilst you're dealing with all the other problems that Lion has.
    ....sT

  • Recently installed Windows 7 on Pavilion dv6748us - internal microphone does not work

    Hi,
    sojo972 wrote:
    I have been searching the web extensively, without success, to find how to resolve this issue.
    I recently installed Windows 7, 32 bit, on my wife's HP Pavilion dv6748us laptop. Now her internal microphone does not work.
    Have gotten some "roadside" advice to use a Windows Vista driver; Have no idea what the driver is or how to get it.
    Have found some information about uninstalling realtek audio driver and reinstalling an older version; Have no idea on this one either.
    Would really appreciate a definitive answer with a positive result.
    Thanks for all help.
    The drivers for the laptop are located here. select Vista and Driver-audio. The Vista driver should work.  You can uninstall the driver from within the Device manager. Start --> type devmgmt.msc and the device manager will open. Locate the HD audio device and right-click it and update the driver.
    After that is done go to Control Panel and Sound and the recording tab up top.  Check to see if the microphone is grayed out. (not grayed out means driver is properly installed). The microphone should also have a green checkmark next to it.  It is now a matter of selecting the microphone then selecting Properties to enable the microphone and then  test and adjust the input level. Look at the tabs (listen,levels and advanced).
    Had you considered trying Windows update or the Realtec website as a drivers source?
    regards,
    erico
    regards,
    erico
    ****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
    2015 Microsoft MVP - Windows Experience Consumer

    Hi:
    Looking at your system information you could have one of two possible audio cards:
    Conexant HD audio or the RealTek HD Audio
    The fact that you couldn't install the RealTek HD audio driver indicates to me that you don't have a RealTek audio card. Check your device manager and look at your sound card and check to make sure which audio card you have.
    Here is the Vista 32 bit driver for the Conexant audio card:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    Here is the Vista 32 bit driver for the Realtek audio card:
    http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=32...
    If you in fact have the Realtek audio card, I would download and install the latest, greatest HD driver directly from the RealTek site:
    Accept the agreement, download and install the first one on the list. Maybe it has been updated to fix the issue you are experiencing.
    http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownT...
    Paul

Maybe you are looking for