[solved]Mobil phone - bluetooth -ppd- doesn't work

I have problem with my connection via bluetooth.
I pair my mobil and notebook, it seems to be O.K. then I dial to the net - phone connect a connection is establish, but nothing works, not ping, not web browser. Can you help me where is the problem?
i use
>pppd call gprs
gprs:
debug
connect "/usr/sbin/chat -v -f /etc/ppp/gprs"
noauth
usepeerdns
/dev/rfcomm0 115200
115200
local
nocrtscts
defaultroute
noipdefault
lcp-echo-interval 0
lcp-echo-failure 0
/etc/ppp/gprs
TIMEOUT 60
ECHO ON
ABORT '\nBUSY\r'
ABORT '\nERROR\r'
ABORT '\nNO ANSWER\r'
ABORT '\nNO CARRIER\r'
ABORT '\nNO DIALTONE\r'
ABORT '\nRINGING\r\n\r\nRINGING\r'
'' 'ATE1'
OK AT+CGDCONT=1,"IP","internet"
OK ATD*99***1#
CONNECT \d\c
ppp.log:
pppd call gprs
ATE1
OK
AT+CGDCONT=1,"IP","internet"
OK
ATD*99***1#
CONNECT
Serial connection established.
using channel 1
Using interface ppp0
Connect: ppp0 <--> /dev/rfcomm0
sent [LCP ConfReq id=0x1 <asyncmap 0xa0000> <magic 0xc7eaf41c> <pcomp> <accomp>]
rcvd [LCP ConfRej id=0x1 <magic 0xc7eaf41c> <pcomp> <accomp>]
sent [LCP ConfReq id=0x2 <asyncmap 0xa0000>]
rcvd [LCP ConfAck id=0x2 <asyncmap 0xa0000>]
rcvd [LCP ConfReq id=0x0 <auth pap> <mru 1500> <asyncmap 0xa0000>]
No auth is possible
sent [LCP ConfRej id=0x0 <auth pap>]
rcvd [LCP ConfReq id=0x1 <mru 1500> <asyncmap 0xa0000>]
sent [LCP ConfAck id=0x1 <mru 1500> <asyncmap 0xa0000>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15>]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <ms-dns1 0.0.0.0> <ms-dns3 0.0.0.0>]
rcvd [IPCP ConfReq id=0x0 <addr 10.6.6.6>]
sent [IPCP ConfAck id=0x0 <addr 10.6.6.6>]
rcvd [LCP ProtRej id=0x0 80 fd 01 01 00 0c 1a 04 78 00 18 04 78 00]
Protocol-Reject for 'Compression Control Protocol' (0x80fd) received
rcvd [IPCP ConfNak id=0x1 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
sent [IPCP ConfReq id=0x2 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
rcvd [IPCP ConfAck id=0x2 <addr 10.176.135.227> <ms-dns1 160.218.10.200> <ms-dns3 160.218.43.200>]
local IP address 10.176.135.227
remote IP address 10.6.6.6
primary DNS address 160.218.10.200
secondary DNS address 160.218.43.200
Script /etc/ppp/ip-up started (pid 8117)
Script /etc/ppp/ip-up finished (pid 8117), status = 0x0
I thing It is the right way but why it doesn't work?
Last edited by walker.cz (2007-11-20 13:24:38)

mucknert wrote:What's the output of your ifconfig and route? What's the content of your resolv.conf?
resolve.conf
# Generated by dhcpcd for interface eth0
# search chello.upc.cz
# nameserver 192.168.1.1
ifconfig:
ifconfig
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:366 errors:0 dropped:0 overruns:0 frame:0
TX packets:366 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:19366 (18.9 Kb) TX bytes:19366 (18.9 Kb)
ppp0 Link encap:Point-to-Point Protocol
inet addr:10.177.143.12 P-t-P:10.6.6.6 Mask:255.255.255.255
UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1500 Metric:1
RX packets:3 errors:0 dropped:0 overruns:0 frame:0
TX packets:4 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:3
RX bytes:54 (54.0 b) TX bytes:66 (66.0 b)
route:
route
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
10.6.6.6 * 255.255.255.255 UH 0 0 0 ppp0
default * 0.0.0.0 U 0 0 0

Similar Messages

My iPad updated and wants a security code. I tried the one from my phone and it doesn't work - I never entered a security code. How can I get in now?

?My iPad updated and now wants a security code for access and I never gave it one. I tried code I used for my phone and it doesn't work. How can I access now?

iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
How to Reset a Forgotten Password for an iOS Device
http://www.wikihow.com/Reset-a-Forgotten-Password-for-an-iOS-Device
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school environment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
 Cheers, Tom

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

I accidentally put a passcode lock on my iPhone and I forgot what I set for it, is there a way to take it off without accessing the phone? I have restored my phone but it doesn't work, is there anybody that could help me please?

You can't "accidentally" put a passcode on any iPhone...its a multi-step process. Further, restoring an iPhone will remove the passcode, as the passcode is not included in an iPhone backup.
Are you sure you're talking about the phone passcode & not something else...like the "Restrictions" passcode?

I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection doesn't work anymore. Does anybody have a solution?

I have installed the new iOS 5 on my Iphone 3GS and my bluetooth connection for my Philips bluetooth headset doesn't work anymore. Does anybody have a solution?
I have checked the headset on another Iphone with iOS 4 and it works well.
Thanks for your help!
Pierre (from Paris - France)

Bonjour Pierre,
there seems to be a bug in iOS5 with regards to Bluetooth. THere are a lot of threads in here on this. We're all waiting for Apple to fix this...

HT4623 i tried to update my phone and it doesn't work.

i tried to update my phone and it doesn't work. Tried restoring from DFU, and other things. I got error message 3194 and have also gotten "this device isn't eligible for the requested build" What do i try now?

If it's stuck on the Apple logo, you'll have to force it into recovery mode and restore it. See http://support.apple.com/kb/ht1808.

Upgraded to Mountain Lion, and now my Bluetooth Headset doesn't work? All I get is very loud static. Help?

I just upgraded my iMac to Mountain Lion and my bluetooth headset doesn't work. All I get is static. Worked fine with Lion. It doesn't work with my new MacBook Pro either.
I use the headset extensively talking on Skype and gtalk with my partner.
Help!!!

If you've tried the SMC reset then try a Pram reset:
http://support.apple.com/kb/ht1379

My iPhone is acting up again; freezing up during phone calls and now the head phone jack intermittently doesn't work.

I got my iPhone 5 back in February 2013 and for the most part of the year I enjoyed it. Then I started having issues with it. First of all the WiFi randomly quit working. I didn't even update it. So I tried updating it, resetting, and restoring it. While it was under warranty I tried getting the issue fixed, but Apple CS blew me off saying it was accidental damage and I should have gotten Apple Care. This time Verizon covered their *** and replaced the phone for me even though it was out of their 6 month warranty period. I think I posted this experience before.
Now my iPhone is acting up again. It first started freezing up during phone calls and now the head phone jack intermittently doesn't work. Again, resetting, restoring, and updating it did not fix these issues.
<Re-Titled By Host>

The original issue they didn't state exactly why it was Accidental Damage. After running through some troubleshooting, they just stated it was Accidental Damage and that I should file a claim with my insurance, and that Apple Care would have covered it; then closed the request.
I've tried resetting settings, restoring it as new, and that was a no go. When it freezes up during calls I also have to perform a hard reset by pressing and holding both the power and the home buttons to get it functioning at all again(just completely freezes, won't respond to touch or home button.) I noticed that the proximity sensor isn't responding as well, so I have to tilt it away from my ear while in a call to keep from pressing the buttons on the touchscreen with the side of my face. I avoid phonecalls now, and text exclusively.
I don't live anywhere near a Genius Bar so I'm stuck with the online support to Apple. And since I don't have a landline, I get charged for their phone support so I tend not to use it.
Getting two lemons in a row seems coincidental so I'm wondering if it's a bad batch Verizon got then distributed out.

Mobile Backup in iTunes doesn't work

Use windows xp and since ios7 mobile Backup doesn't work in i Tunes! What can i do?

I found another post suggesting a reboot using the up and down volume keys on the side of the phone. Press both at once and hold until the screen goes black. (ignore the screen shot message). Once my phone rebooted I was able to set up the hotspot. Not sure if it will work for everyone but did for me.

Mobile Datastick HUAWEI E1221 doesn't work with Mountain Lion!

After updating from Snow Leopard to Mountain Lion I have noticed that my mobile datastick doesn't work. The stick is recognized as virtual disc and I can only install the install.pkg. Then happens nothing. No window opens (as before). How can I connect to the internet now? Will there be new drivers for the E1221 or do I have to get another one? And if yes, which is supported by 10.8?
Tom

giantbigmac wrote:
Will there be new drivers for the E1221
Tom
Ask Huawei

My phone's earphone doesn't work which was bought from USA last month,the china apple store didn't accept the free repaired,so what can i do now?

my new iphone5s's earphone doesn't work which was bought from USA last month,probably it was cause by falling down on floor insidentally one day before I came back china , the problem is ,the china apple store didn't accept the free repaire even the phone was bought only one month age, I was so disappointed and realized the iphone 5s is so fragile,although I previous iphone4 which was also bought from USA 4 years age, it also fell down many times, it still works well now. what can i do now? send it back to USA for repairing? if like that,it will take almost two month to finish the all processes,that not only waste the time spent on the way, also waste expense on the expense,the important prlblem is, I can't use the phone during the repairing~ please give me a solution as soon as you can ,thank you very much!

You can send it to someone you know in the US to have them take it in for service or you can get on a plane and take it there yourself. You can not ship it to Apple in the US for service.

New I phone 5 - camera doesn't work

Bought a new I phone 5 and the camera doesn't work. Need help

Camera
Camera is not functioning
If the screen shows a closed lens or black image, force quit the Camera app.
If you do not see the Camera app on the Home screen, try searching for it in Spotlight. If the camera does not show up in the search, check to make sure that Restrictions are not turned on by tappingSettings > General > Restrictions.
Ensure the camera lens is clean and free from any obstructions. Use a microfiber polishing cloth to clean the lens.
Third-party cases can interfere with the autofocus/exposure feature and the flash (iPhone 4 only); try removing the case if you have image-quality issues with photos.
Try turning iPhone off and then back on.
Tap to focus the camera on the subject. The image may pulse or briefly go in and out of focus as it adjusts.
Try to remain steady while focusing:
Still images: Remain steady while taking the picture. If you move too far in any direction, the camera automatically refocuses to the center. Note: If you take a picture with iPhone turned sideways, it is automatically saved in landscape orientation.
Video: Adjust focus before you begin recording. After recording begins, you cannot readjust focus until you stop recording. Exiting the Camera application while recording will stop recording and will save the video to the Camera Roll. Note: Video-recording features are not available on original iPhone or iPhone 3G.
If your iPhone has a front and rear camera, try switching between them to verify if the issue persists on both.
Is the camera app not opening? Or the app will open but the camera won't take pictures?

Mobile phone bluetooth control on iBook

hello guys,
i am using a sony ericsson K750i mobile phone. is there any way/any freeware i can use besides "salling clicker" to be able to control iWorks or powerpoint on my iBook?
thanks a lot.

MsVee wrote:
I just bought one of those new do-everything cell phones and I'm trying to get the phone and the computer to talk to each other. When I ran the bluetooth setting on my laptop, it found and downloaded the driver from Toshiba driver site, asked me to connect the device then froze. It keeps asking me to plug in the device over and over.
I've made sure bluetooth is enabled on the phone but not sure how to check the PC.
Any help, direction or advice offered would be greatly appreciated.
Thanks in advance.
The M305-S4910 does not have Bluetooth hardware, so that's why the laptop is 'freezing'. Toshiba sells a USB adapter:
http://www.toshibadirect.com/td/b2c/adet.to?poid=429172

Phone Software update doesn't work with WiFi

Can someone please help.
I have an unlocked N97Mini. I'm trying to update the software version from 10.something to the currently available 12.something. For some reason my USB chord doesn't work (it only charges the phone, that's it) so I'm unable to use PC Suite. I tried to update the software wirelessly using WiFi but it won't let me do it, everytime I select on Phone Software under Application->SF Update it opens a pop up that says I have to use PC Suite. I uploaded other software through WiFi before such as OVI music, but it won't let me do it for the Phone Software.
Please help. How can I update my Phone Software wirelessly?
Thanks
Andrei

If you get the message that you need to use PC for updating the phone software, the software for your device variant may not yet be available for over-the-air update and you must do it via PC. You can check also if the same thing happens if you type *#0000# and select in this menu Options > Check for updates.
If PC Suite is not working with your device, try installing the latest Ovi Suite version in your PC.

Bought a Skype phone but it doesn't work. How do I...

I bought a Skype telephone through internet from the 'Skype shop'. I tried to install it but it doesn't work.
Someone else tried to install it too - someone used to those things - but it does not work. I need to send it back to Skype but how do I go about this as I don't have an address?
Can anyone help?
Thank you!

contact customer service
TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
I recommend that you always run the latest Skype version: Windows & Mac
If my advice helped to fix your issue please mark it as a solution to help others.
Please note that I generally don't respond to unsolicited Private Messages. Thank you.

[solved] Volume control in amarok doesn't work anymore

Hi,
since today in amarok (2.4.1) the volume control doesn't work anymore. I can change the level on the switch on the top right but it doesn't change the actual volume.
The volume control in my KDE tray works as usual.
Last edited by Barghest (2011-07-05 18:01:07)

Just came back from suspend and it works again.
Sorry for the noise.

[solved]Mobil phone - bluetooth -ppd- doesn't work

Similar Messages

Maybe you are looking for