[SOLVED]ModemManager 0.7 breaks support for Ericsson F3607gw WWAN card

Hello,
apparently the ModemManager v 0.7.990 currently in the repos no longer supports my WWAN card, a Dell 5540 Mobile Broadband (which is just a rebranded Ericsson F3607gw).
ModemManager 0.6, which is the version used in Fedora 18, works just fine with the card and connections can be made.
My device, as listed by lsusb:
Bus 008 Device 004: ID 413c:8184 Dell Computer Corp. F3607gw v2 Mobile Broadband Module
The output of the log with MM 0.7:
Apr 25 00:43:18 brb-laptop ModemManager[1823]: <info> ModemManager (version 0.7.990) starting...
Apr 25 00:43:18 brb-laptop systemd[1]: Started Modem Manager.
Apr 25 00:43:18 brb-laptop sudo[1820]: pam_unix(sudo:session): session closed for user root
Apr 25 00:43:20 brb-laptop ModemManager[1823]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:19.0': not supported by any plugin
Apr 25 00:43:20 brb-laptop ModemManager[1823]: <warn> Couldn't find support for device at '/sys/devices/pci0000:00/0000:00:1c.1/0000:0c:00.0': not suppo...ny plugin
Apr 25 00:43:22 brb-laptop ModemManager[1823]: <info> Creating modem with plugin 'Generic' and '4' ports
Apr 25 00:43:22 brb-laptop ModemManager[1823]: <info> Modem for device at '/sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6' successfully created
Apr 25 00:43:23 brb-laptop ModemManager[1823]: <warn> couldn't load Operator name: 'Could not parse the CRSM response'
Apr 25 00:43:23 brb-laptop ModemManager[1823]: <info> Modem: state changed (unknown -> disabled)
Any connection attempt with NM fails with the log entry "cannot find valid data port".
When downgrading to MM 0.6, the output is:
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'MotoC'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Gobi'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Huawei'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Option High-Speed'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Option'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Sierra'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Novatel'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Nokia'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'ZTE'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Ericsson MBM'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Longcheer'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'AnyData'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'SimTech'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'X22X'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Linktop'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Samsung'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Wavecom'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Cinterion'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Iridium'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Loaded plugin 'Generic'
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> Successfully loaded 20 plugins
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM0) opening serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM1) opening serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM2) opening serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (Ericsson MBM): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6 claimed port wwp0s29f7u6i6
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM0) closing serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM0) serial port closed
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (Ericsson MBM): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6 claimed port ttyACM0
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM1) closing serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM1) serial port closed
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (Ericsson MBM): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6 claimed port ttyACM1
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM2) closing serial port...
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM2) serial port closed
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (Ericsson MBM): GSM modem /sys/devices/pci0000:00/0000:00:1d.7/usb2/2-6 claimed port ttyACM2
Apr 25 00:40:52 brb-laptop modem-manager[1522]: <info> (ttyACM0) opening serial port...
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): new GSM/UMTS device (driver: 'cdc_ether' ifindex: 2)
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): exported as /org/freedesktop/NetworkManager/Devices/4
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): now managed
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): bringing up device.
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): deactivating device (reason 'managed') [2]
Apr 25 00:40:53 brb-laptop NetworkManager[219]: <info> (wwp0s29f7u6i6): device state change: unavailable -> disconnected (reason 'none') [20 30 0]
Apr 25 00:40:53 brb-laptop kernel: IPv6: ADDRCONF(NETDEV_UP): wwp0s29f7u6i6: link is not ready
Apr 25 00:40:53 brb-laptop modem-manager[1522]: <info> (ttyACM0) closing serial port...
Apr 25 00:40:53 brb-laptop modem-manager[1522]: <info> (ttyACM0) serial port closed
However, I cannot downgrade to MM 0.6 as Gnome 3.8 and NetworkManager require >=0.7.
Has anyone encountered this problem before and has a fix/solution? Or should I file a bug in the Arch tracker? I got Bluetooth PANs to work with a patched bluez from this board, as the upstream version is behind the one used by fedora (4.101-1 vs. 4.101-4). WWAN is the only thing that doesn't work with my new Arch setup.
Thanks in advance, any help would be much appreciated.
Last edited by grinko (2013-04-29 21:10:07)

I did, you linked to it already
I slightly modified modemmanager-git in the AUR and added some dependencies, the git version now works for me.

Similar Messages

L520: are there any Win 8 drivers for Ericsson 5521gw WWAN card?

I can't find any Win 8 drivers for my L520. There is a driver listed on the Win 8 beta page, but L520 is not mentioned there.
Is the 5521gw card working on Win 8 x64? Do I need the beta driver or do we have to install the Win 7 version?

I can't find any Win 8 drivers for my L520. There is a driver listed on the Win 8 beta page, but L520 is not mentioned there.
Is the 5521gw card working on Win 8 x64? Do I need the beta driver or do we have to install the Win 7 version?

10.10.3 breaks support for ATI video cards

The 10.10.3 update has broken support for a bunch of ATI video cards that worked just fine under 10.10.2. This is for my Mac Pro 5,1. Some folks also reported issues with breaking support for Nvidia cards, but have mentioned that the latest Nvidia beta drivers might work.
There is a thread that may be found here that has some details:
OS X 10.10.3 Update
and here (reverting back to 10.10.2 fixes things):
http://forums.macrumors.com/showthread.php?t=1864352
Specifically, my Visiontek Eyefinity 6 7750 stopped working, and another users Radeon 7770 stopped working. Yet, the 7970 continues to work. Reverting to the old ATI 5770 that came with the machine renders it usable. This is a problem as the 7750 only took a single slot, and the two 5770s eat up 3 slots so I can't use my USB 3 card, etc.
I remember this once happened before. I think it was with the 10.9.2 update which borked a bunch of video cards that worked fine under 10.9.1, and then were again made to work just fine with the 10.9.3 update.
All the 'standard' fixes have been attempted. Clean installs. Fix permissions. Etc.
Not sure why apple would seemingly disable support for these cards, other than by accident, I assume, much like happened with the 10.9.2 update.
Also not sure if just copying the correct driver from 10.10.2 might solve the problem until Apple get's around to fixing the issue. Has anyone tried? Any suggestions would be appreciated. Thanks!

Hi, i am using dual Cinema Display 30 and 23 with a HIS ATI 7750 1 GB on a Mac Pro 3.1. Post upgrade from 10.10.2 to 10.10.3 my display eded unusable blurry. Therefore I have tried to replace the 10.10.3 kext with the previous 10.10.2. But it did not work out as expected. I managed to get some video output but no acceleration at all. Therefore the system is unusable. Therefore i full downgraded to 10.10.2 now.
Never the less it might be a good starting point for someone to get acceleration running. This is what I did:
I have to set the nvram variable kext-dev-mode=1, but be warned this will allow any unsigned > .kext to load, including rootlets, malware, etc.
I did this in order to allow me to modify the kext if necessary and to ensure that if 10.10.2 kext might be locked that they still be loaded and the computer will not be prevented from boot.
sudo nvram boot-args="kext-dev-mode=1"
sudo shutdown -r now
Post this i copied from my other Mac running 10.10.2 the file /System/Library/Extensions/AMDRadeonX4000.kext to my Mac Pro 3.1 running 10.10.3 with no proper video output. Basically i copied all ATI related kext from one mac to the other.
copied [MAC10.10.2]/System/Library/Extensions/ATI* ----> [MAC10.10.3]/System/Library/Extensions/ATI*
copied [MAC10.10.2]/System/Library/Extensions/AMD* ----> [MAC10.10.3]/System/Library/Extensions/AMD*
someone needs to do a diff here to identify the file with is necessary the only one i found with a significant change seems to be AMDRadeonX4000.kext
I forced to rebuild kext cache manually
sudo touch /System/Library/Extensions
sudo kextcache -m /System/Library/Caches/com.apple.kext.caches/Startup/Extensions.mkext /System/Library/Extensions
And reboot!
sudo shutdown -r now
After the reboot I had display output but no acceleration at all. Seeing the video out put made me happy but the system is unusable to to the lack of acceleration of the display. I am really looking forward for Apple to fix the update and to reapply support for the ATI GPUs hence it allows to save environmental resources to keep good products like the Mac Pro 3.1 running...

Airport Utility 6.0.0 breaks support for my Airport Express

Computer updated to Airport Utility 6.0 but that breaks support for my Airport Express. When I try to access the Airport Express it tells me I have to download Airport Utility 5.6 - but I can't find that anywhere on the Apple sites to download!

My catch-all list of Airport 6.0 & Firmware 7.6.1 problems:
~~~~~~~~~~~~~~
I've compiled a catch-all list of problems and changes with Airport Utility version 6.0 and FW 7.6.1. Some of the items may be relevant to this thread.
THE PROBLEMS WITH AIRPORT UTILITY 6 AND FIRMWARE 7.6.1:
Introduction: If you find AirPort Utility v6.0 too limiting or strange, you can ALSO install AirPort Utility v5.6, released alongside v6.0, to maintain all your previous capabilities. It works fine with both Airport g and n devices.
PLEASE NOTE: According to Apple you must FIRST install Airport Utility v6.0 in order to access and install Firmware upgrade 7.6.1. Do that first. THEN install Airport Utility v5.6 and use it instead if you prefer. HOWEVER: Another user has informed me that they were able to use Airport Utility v5.6 to install Firmware v7.6.1 without any problems! This would mean anyone can avoid Airport Utility 6.0 entirely if they chose.
~~~~~~~~~~~~~~~~~~~
1) According to Apple's documentation, Airport Utility version 6.0 is ONLY for Mac OS X 10.7 Lion. It is NOT for 10.6 Snow Leopard. If you accidentally installed v6, you'll have to dig around in Apple - Support - Downloads for the previous relevant version for your devices and OS version. Here is the relevant page:
http://support.apple.com/kb/DL1483
2) The HELP for Airport Utility has been updated. When you first access it you may well be looking at the old Help. It is supposed to update itself spontaneously over the Internet. It took a couple minutes in my case. Be sure you are looking at the NEW Help before you start using it. One way to tell is that the list of help topics essentially doubles from what there used to be. Also, the very first topic in the NEW Help should read:
"Set up an AirPort device > Set up a new AirPort Base Station or Time Capsule"
3) The HELP has some WRONG information. Here we go:
3a) There is NO "Enable Guest Network" setting. You CANNOT create a guest network or name it or give it any settings. Why this is still listed in Help, I have no idea. Why the setting is gone: This is most likely because the technology behind guest networks, WPS, has been thoroughly CRACKED in the wild. Google "WPS cracked" for lots of documentation of the situation. It won't be resolved soon.
3b) I can't find any 'Setup Assistant". Everything is now manual. This is not to say that there isn't a setup assistant that appears when you FIRST set up your Airport device. I don't know.
4) After installing Airport Utility v6.0, there is no indication of the accompanying firmware update until you decide to run the new version. Even then, you have to click on the big icon of your Airport device and notice an 'Update' button about halfway down the popup window. You then have to assume that this button is telling you to update your firmware.
5) After you update your Airport device's firmware, you may well discover an ERROR subwindow popping up inside Airport Utility that says:
"An error occurred while updating the firmware. -6721"
Don't panic! All you need to do is go into your Wi-Fi settings, either in your menubar or the Network preferences, and turn OFF Wi-Fi, then turn ON Wi-Fi again. This is part of a long standing bug in Lion's Wi-Fi with which I bet you are already familiar, certainly up through Lion version 10.7.2.
6) Miscellaneous changes in Airport Utility 6:
6a) The keyboard command to manually change your Airport devices settings is GONE. You have to click the little 'Edit' button after clicking on the big icon for your device.
6b) There is no longer any summary window for your Airport device. You have to instead click on the big "Internet" icon for related data, then click on the big icon for your Airport device for local settings data.
6c) There is no longer any HELP advising users to EXPORT their settings. (The Help only talks about Import of settings). BE SURE TO EXPORT YOUR NEW SETTINGS! I did this immediately after both updates.
6d) MAC address filtering for Airport devices is GONE.
6e) All references to IPV6 anywhere are GONE. I have to assume the IPV6 settings are now entirely working and entirely automatic. Let's hope so.
6f) Signal and Noise data and graphs are GONE. Use Apple's Wi-Fi Diagnostics app instead. Apple have hidden it here in Lion:
/System/Library/CoreServices/W-Fi Diagnostics
6g) In order to access the menu items in Airport Utility, you have to first click on the big icon for your Airport device.
--> No doubt there are other changes, oddities or bugs related to these changes. But this is what I came up with during a cursory strafing of the software.

10.4.7 Adds Support for Verizon/Sprint EVDO Cards

Mac OS X 10.4.7 Adds support for the following EVDO Cards:
- Novatel 620 (Verizon V620, Sprint S620)
- Sierra AirCard 580 (Verizon & Sprint)
- PC5220 (already was supported in 10.3.5, adds support for PC5220 new firmware)
Lots more information and screenshots at:
http://www.evdoinfo.com/TheNews/Latest_News/Apple_Adds_EVDO_Card_Support_in_10.4.720060627772/
G5 Dual 2.5 GHZ, PowerBook G4 15 inch Mac OS X (10.4.6)

If this is correct, then when I get my Merlin S620, all I need to do is pop it into my 17" Powerbook and I'm good to go??!?!?! If so, then WOOOOOOOOOOTTT! However, I am not getting an unlocked card...will I still need to go through a PC to unlock it? What are the steps?

Support for AVM ISDN PCMCIA Card in Solaris 10 ?

Hi all,
I would like to install Solaris 10 on my Toshiba Tecra S1 notebook. Today I use an ISDN-Card (AVM FritzCard, PCMCIA) for dial-up connections under Windows XP. Are there any drivers for ISDN and/or PCMCIA-Cards in Solaris10? Does anyone have any experiences with this issue?
Every hint would be appreciated.
Thanks a lot.
Kindly Regard,
Holger

Hello.
There only very poor support for ISDN cards in Solaris. As far as I know only the on-board ISDN card of one of the SparcStation computers is supported (this card is available as S-Bus card for other SparcStation computers).
I think there is no support for any ISDN card that can be attached to an x86 computer.
I wrote a driver for USB based ISDN modems that are based on the Winbond 6694 chip myself due to this lack of ISDN support. I tested it under Solaris 9/Sparc.
Martin

[solved] kdemod-extragear-amarok breaks pacup for no reason

Hi!
For some days now the installed kdemod-extragear-amarok (2.0.2-7) breaks the 'pacman -Syu' command:
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: kdemod-extragear-amarok: requires libgpod=0.6.0
But when I remove kdemod-extragear-amarok, do the upgrade and reinstall it again there are no conflicts.
I don't see a reason for this...
cheers
EDIT:
This is already know here... http://kdemod.ath.cx/bbs/viewtopic.php?id=615
Last edited by fthieme (2009-04-03 13:36:09)

fthieme wrote:
Hi!
For some days now the installed kdemod-extragear-amarok (2.0.2-7) breaks the 'pacman -Syu' command:
resolving dependencies...
looking for inter-conflicts...
error: failed to prepare transaction (could not satisfy dependencies)
:: kdemod-extragear-amarok: requires libgpod=0.6.0
But when I remove kdemod-extragear-amarok, do the upgrade and reinstall it again there are no conflicts.
I don't see a reason for this...
cheers
Yea-for a while know on startup Amarok complains about not finding libgpod.so.3-it will go ahead and start though...
KLibLoader could not load plugin:
libamarok_collection-ipodcollection
Error message:
Cannot load library /usr/kde4/libamarok_collection-ipodcollection.so: (libgpod.so.3: cannot open shared object file: No such file directory)

[SOLVED] WINE has no more support for xinput?

Short version: WINE programs no longer have pressure sensitivity. Tablet works fine in non-WINE programs like GIMP.
I hope this falls under multimedia because my Windows graphics programs (Artrage, Photoshop) don't have pressure sensitivity any more. I've checked with GIMP and Xournal, xinput works fine there, though they are drastically less sensitive than their Windows counterparts (unfortunately). Unless there's a patch that makes GIMP understand more than 256 levels of pressure, I think I'll stick to photoshop.
Anyway, I was wondering if anyone out there is experiencing the same thing (I'm using a Wacom Tablet, though I do have that newish 12WX cintiq). I definitely was using Photoshop and Artrage through WINE perfectly before, pressure sensitivity and even tilt was great.
But now, I have no idea what happened. Is there something wrong with the WINE configuration, you think? Or is it my best bet just to downgrade WINE or update the linuxwacom drivers (to the beta)?
Thanks in advance,
feminaexlux
PS. WINE is 1.1.5, Linuxwacom is 8.0.3
Last edited by feminaexlux (2008-09-27 22:30:00)

Guess it was a wine bug. Compiled Wine 1.1.4 from source, and things are now working as they should.
I hate regression!

Yoga 2 11 support for new AC Wifi card

I just recently upgraded my Yoga 2 11 with a new Crucial MX100 512 GB SSD. While in the laptop, I pulled the factory Wifi card and bought and installed the Intel Dual-Band Wireless AC 7260. I get the dreaded error on bootup that it has detected a unsupported wi-fi card. Is there a supported AC card for this machine, or plans to support this Intel card?
The top card is what came from the factory (real piece of junk), and the bottom is the new Intel card.

Have you considered looking at what's available in the Lenovo Outlet ?
Here's one example, Y11s Haswell: http://outlet.lenovo.com/outlet_us/itemdetails/59RF0542/445
Listed as a refurb. My experience with refurbs from the outlet is that I couldn't tell them from 'new'. YMCV.
Happy Hunting!
English Community Deutsche Community Comunidad en Español Русскоязычное Сообщество
Community Resources: Participation Rules • Images in posts • Search (Advanced) • Private Messaging
PM requests for individual support are not answered. If a post solves your issue, please mark it so.
X1C3 Helix X220 X301 X200T T61p T60p Y3P • T520 T420 T510 T400 R400 T61 Y2P Y13
I am not a Lenovo employee.

Support for 6085 Nokia Sim card

What is and where do I get an unlocked GSM quad band mobile handset to support a new Sim card for a 6085 Nokia phone?
Heyyou06
Solved!
Go to Solution.

Welcome to Nokia Discussions, heyyou06.
For the latest quad-band capable phones from Microsoft & Nokia please refer to this page at http://www.microsoft.com/en-us/mobile/phones/all
The Nokia 6085 is a quad-band phone, for it to take a new sim card type (micro/nano) you might need to use a SIM card adapter.

GLSL support for intel x3100 video cards?

I recently purchased a Lenova Thinkpad T61. I opted for an Intel integrated graphics card (X3100) since I had heard Intel had good open source drivers. Recently, I tried to play with some GLSL (OpenGL Shading Language) programming, but was greeted with segfaults at every turn. I finally downloaded and ran the examples from the bottom of this page: http://www.lighthouse3d.com/opengl/glsl … glexample1
Much to my surprise, they told me "No OpenGL 2.0 support" and "No GLSL support", respectively.
I am using xf86-video-intel-2.2.0-2 and the "Driver" in my xorg.conf is "intel".
Does anyone know anything about this? Am I out of luck hardware wise, or is this just a driver thing? Is support coming anytime soon? Am I using the wrong driver?
Thanks,
Jeremy
Last edited by iggames (2008-02-24 02:56:01)

The GMA X3100 really doesn't have OpenGL 2.0 support, only OpenGL 1.5 support.
See here: http://en.wikipedia.org/wiki/Intel_GMA# … d_chipsets
I really don't know if the GLSL support can be implemented by the driver without OpenGL 2.0 hardware support.

Adobe CS6 Windows Production Premium Support for NVidia K5000 Video Card?

When will Windows version of Adobe CS6 Production Premium support the new NVidia Quadro K5000 Video card?
We currently so not have GPU Acceleration.
Help!!!!

NTVWEBAdmin wrote:
Hopefully soon. How will we know when it is?
I wish I could tell you....
I work for Adobe, so I can't.
Thanks for your feature request!

ATI Radeon HD 4870, support for quicktime using video card to decode h.264?

Does anyone know if Apple decided to use some of the fancy hardware in the new ATI RADEON HD 4870 to allow quicktime to shunt the h.264 decoding off to the video card?
I've got a 8 cores (and they don't seem all that busy). Even with the Perian quicktime plugin I still run into some HD movies that don't get a constant 24fps.

If the MAc Pro 2.66 comes with Snow Leopard, why would I have to upgrade my OS?
OK. So, if got the MAc version, it would work A-OK without overheating?
Thanks for your input!

Dell 5540 (Ericsson F3607gw WWAN) problem - sim-missing

Hello,
I'd like to use internal WWAN modem in my laptop (Dell E5440). Originally there was Sierra Wireless AirPrime (Dell 5570) which was not working at all on stock kernel. After some googling and tweaking kernel modules I got it to the point, where it was partially discovered, but ModemManager said "sim-missing". I left it in this state because I found nobody who ever got it working on Linux... but yesterday I got a chance to swap it with Dell 5540 modem. So i did.
And... it is not working ;-)
There is of course big step forward - as the modem is properly detected and so on, but... "sim-missing" keep appearing.
There is no entry of "WWAN" in NetworkManager.
SIM card is of course present. When I put this SIM card into Huaweii USB modem - it works - it shows in NetworkManager, accepts PIN and allows to connect to the network.
I have read https://wiki.archlinux.org/index.php/USB_3G_Modem and did as it was written.
I've found this thread https://bbs.archlinux.org/viewtopic.php?id=162295, but it's about version 0.7 of ModemManager and now we have version 1.2 so it is obsolete.
Does anybody has an idea what is wrong? What can I check?
root@pbr-laptok:/home/pabre# mmcli -L
Found 1 modems:
/org/freedesktop/ModemManager1/Modem/0 [Dell] D5540
root@pbr-laptok:/home/pabre# mmcli -m 0
/org/freedesktop/ModemManager1/Modem/0 (device id '8ccd82c9b505e0d67d0aeb17172869c8794fa61a')
Hardware | manufacturer: 'Dell'
| model: 'D5540'
| revision: 'R1K06'
| supported: 'gsm-umts'
| current: 'gsm-umts'
| equipment id: '353237030500996'
System | device: '/sys/devices/pci0000:00/0000:00:1d.0/usb1/1-1/1-1.8/1-1.8.3'
| drivers: 'cdc_acm, cdc_ether, cdc_wdm'
| plugin: 'Ericsson MBM'
| primary port: 'ttyACM0'
| ports: 'ttyACM0 (at), ttyACM1 (at), wwp0s29u1u8u3i6 (net), ttyACM2 (at)'
Numbers | own : 'unknown'
Status | lock: 'unknown'
| unlock retries: 'unknown'
| state: 'failed'
| failed reason: 'sim-missing'
| power state: 'low'
| access tech: 'unknown'
| signal quality: '0' (cached)
Modes | supported: 'allowed: any; preferred: none'
| current: 'allowed: any; preferred: none'
Bands | supported: 'unknown'
| current: 'unknown'
IP | supported: 'ipv4, ipv6'
SIM | path: 'none'
Bearers | paths: 'none'
root@pbr-laptok:/home/pabre# lsusb | grep Mobile
Bus 001 Device 006: ID 413c:8184 Dell Computer Corp. F3607gw v2 Mobile Broadband Module

I did, you linked to it already
I slightly modified modemmanager-git in the AUR and added some dependencies, the git version now works for me.

X301 win7 Ericsson 3507g WWAN Card

Hi all,
Anyone got the above card to work with windows 7? Have tried the following but it seems to make no difference.
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#f3507g
The error stated is "This device cannot start. (Code 10)"
Anyone any ideas to troubleshoot the problem?
Cheers for any pointers.
Solved!
Go to Solution.

After a few hours battle and reading a few other posts that google failed to index..
Solution was to install System Information..
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#sid
Followed by Power Manager..
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#powm
Followed by Access Connections..
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#tvac
Reboot
Uninstalled the erricson core from programs, and unistalled the hardware from device manager.
Downloaded the following again..
http://www-307.ibm.com/pc/support/site.wss/WIN7-BETA.html#f3507g
Ran as administrator and in compatibility mode for xp sp3. (32 bit exe)
Couple of mins later all working as per norm.
Hope this saves others the watse of time.
Cheers

[SOLVED]ModemManager 0.7 breaks support for Ericsson F3607gw WWAN card

Similar Messages

Maybe you are looking for