[Solved] Mouse speed with evdev

The old mouse driver in xorg had an option
Option "Sensitivity" "float"
that can be used to slow down high sensitivity mouse. Is it possible to do the same with the new evdev driver (having found nothing in the Wiki). For now I have
Option "AutoAddDevices" "off"
in the ServerFlags section and I continue to use the old mouse driver (as xorg < 1.4). Can I use the new feature without losing the Sensitivity option?
Edited: The evdev driver support 'Option "ConstantDeceleration" <Float>'  that do the trick; it was not so easy to find it.
Last edited by olive (2011-09-03 18:30:42)

Have you tried with xorg.conf?
Edit: Ah, I get it, it won't be recognized anyway.
How about that xset? Can it be used to slow down too?
Or maybe xinput:
[karol@black ~]$ xinput --list
⎡ Virtual core pointer id=2 [master pointer (3)]
⎜ ↳ Virtual core XTEST pointer id=4 [slave pointer (2)]
⎜ ↳ ImExPS/2 Generic Explorer Mouse id=9 [slave pointer (2)]
⎣ Virtual core keyboard id=3 [master keyboard (2)]
↳ Virtual core XTEST keyboard id=5 [slave keyboard (3)]
↳ Power Button id=6 [slave keyboard (3)]
↳ Power Button id=7 [slave keyboard (3)]
↳ AT Translated Set 2 keyboard id=8 [slave keyboard (3)]
[karol@black ~]$ xinput --list-props 9
Device 'ImExPS/2 Generic Explorer Mouse':
Device Enabled (121): 1
Coordinate Transformation Matrix (123): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
Device Accel Profile (242): 0
Device Accel Constant Deceleration (243): 1.000000
Device Accel Adaptive Deceleration (244): 1.000000
Device Accel Velocity Scaling (245): 10.000000
Evdev Axis Inversion (246): 0, 0
Evdev Axes Swap (248): 0
Axis Labels (249): "Rel X" (131), "Rel Y" (132)
Button Labels (250): "Button Left" (124), "Button Middle" (125), "Button Right" (126), "Button Wheel Up" (127), "Button Wheel Down" (128), "Button Horiz Wheel Left" (129), "Button Horiz Wheel Right" (130), "Button Side" (240), "Button Extra" (241), "Button Unknown" (239), "Button Unknown" (239), "Button Unknown" (239), "Button Unknown" (239)
Evdev Middle Button Emulation (251): 0
Evdev Middle Button Timeout (252): 50
Evdev Wheel Emulation (253): 0
Evdev Wheel Emulation Axes (254): 0, 0, 4, 5
Evdev Wheel Emulation Inertia (255): 10
Evdev Wheel Emulation Timeout (256): 200
Evdev Wheel Emulation Button (257): 4
Evdev Drag Lock Buttons (258): 0
There are some 'Device Accel' properties listed, so maybe this is what you're looking for.
Last edited by karol (2011-08-04 10:46:39)

Similar Messages

  • Mouse Speed with PC USB mouse

    Hi
    Can somebody tell me how I can increase the mouse tracking speed of a normal non-mac usb mouse?
    I have "Zoom Mouse" installed but this only helps for the touchpad, the mouse remains to be painfully slow.
    Thanks!

    There is a great utility for customizing any USB mouse its called USB Overdrive
    http://www.usboverdrive.com
    I use it with Logitech MX 510 and it works very well, i can even customize its extra buttons for Mac OS X specific functions.
    MacBook Pro 1.83Ghz 1GB RAM   Mac OS X (10.4.8)  

  • Hello  Simple problem - don,t know how to solve it.  With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

    Hello
    Simple problem - don,t know how to solve it.
    With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
    I was like ????#$%?&*(???
    Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
    Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! -  is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
    The problem is that scrolling is enable while clicking and it bugs.
    How to disable it ??
    Simple question - can't find the answer !

    Helllooo !?
    sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
    Thanks !!

  • Mouse cursor speed with a cordless Logitech V200

    Hi,
    I've got a new cordless mouse (Logitech V200). Great but cursor speed is way to fast. Changing the speed in the Sys pref panel is ok setting is lost after reboot. Any clue ?
    Otherwise, is there any terminal command I could write to change the mouse speed ? I could then include this command in a script to be launched each start.
    Thanks!

    Welcome to Apple Discussions!
    Are you using Logitech's own drivers, or Apple's Keyboard and Mouse System Settings?

  • [SOLVED?] Problem with nVidia card

    This is my first post, so; hello to everyone!! Thx in advance to this great community!!
    My problem is pretty strange and anoying. I have an nVidia 8600GT in a Abit AX78 MB running Arch with KDE. Anything is going right until logon process. I write the user and password in KDM screen and then, after de animation of init proces of KDE, all graphics displayed are corrupted (a rectangle in the upper left corner is showed) and that's it. Only work the mouse pointer.
    This malfunction its showed by the nouveau driver AND the proprietary driver... So i think the problem is it in other place than the driver of the card.
    The Xorg.0.log and dmesg.log files are atached at the end of this thread.
    I hope that annyone can help me.
    Thx in advance again.
    The Xorg.0.log file contains this:
    [ 15.809]
    X.Org X Server 1.10.3
    Release Date: 2011-07-08
    [ 15.814] X Protocol Version 11, Revision 0
    [ 15.814] Build Operating System: Linux 2.6.39-ARCH i686
    [ 15.814] Current Operating System: Linux hidramedia_host 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011 i686
    [ 15.815] Kernel command line: root=/dev/sda5 ro
    [ 15.815] Build Date: 09 July 2011 07:57:07AM
    [ 15.815]
    [ 15.815] Current version of pixman: 0.22.2
    [ 15.815] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 15.815] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 15.815] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Aug 1 14:13:23 2011
    [ 15.829] (==) Using config file: "/etc/X11/xorg.conf"
    [ 15.829] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 15.835] (==) ServerLayout "Layout0"
    [ 15.835] (**) |-->Screen "Screen0" (0)
    [ 15.835] (**) | |-->Monitor "Monitor0"
    [ 15.836] (**) | |-->Device "Device0"
    [ 15.836] (**) |-->Input Device "Keyboard0"
    [ 15.836] (**) |-->Input Device "Mouse0"
    [ 15.836] (==) Automatically adding devices
    [ 15.836] (==) Automatically enabling devices
    [ 15.859] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 15.859] Entry deleted from font path.
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 15.859] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 15.859] Entry deleted from font path.
    [ 15.859] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 15.859] (==) FontPath set to:
    /usr/share/fonts/misc/
    [ 15.859] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 15.859] (**) Extension "Composite" is disabled
    [ 15.859] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 15.859] (WW) Disabling Keyboard0
    [ 15.859] (WW) Disabling Mouse0
    [ 15.859] (II) Loader magic: 0x822e1a0
    [ 15.859] (II) Module ABI versions:
    [ 15.859] X.Org ANSI C Emulation: 0.4
    [ 15.859] X.Org Video Driver: 10.0
    [ 15.859] X.Org XInput driver : 12.2
    [ 15.859] X.Org Server Extension : 5.0
    [ 15.860] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xf8000000/33554432, I/O @ 0x0000df00/128, BIOS @ 0x????????/131072
    [ 15.860] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 15.860] (II) LoadModule: "extmod"
    [ 15.871] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 15.880] (II) Module extmod: vendor="X.Org Foundation"
    [ 15.880] compiled for 1.10.3, module version = 1.0.0
    [ 15.880] Module class: X.Org Server Extension
    [ 15.880] ABI class: X.Org Server Extension, version 5.0
    [ 15.880] (II) Loading extension MIT-SCREEN-SAVER
    [ 15.880] (II) Loading extension XFree86-VidModeExtension
    [ 15.880] (II) Loading extension XFree86-DGA
    [ 15.880] (II) Loading extension DPMS
    [ 15.880] (II) Loading extension XVideo
    [ 15.880] (II) Loading extension XVideo-MotionCompensation
    [ 15.880] (II) Loading extension X-Resource
    [ 15.880] (II) LoadModule: "dbe"
    [ 15.880] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 15.881] (II) Module dbe: vendor="X.Org Foundation"
    [ 15.881] compiled for 1.10.3, module version = 1.0.0
    [ 15.881] Module class: X.Org Server Extension
    [ 15.881] ABI class: X.Org Server Extension, version 5.0
    [ 15.881] (II) Loading extension DOUBLE-BUFFER
    [ 15.881] (II) LoadModule: "glx"
    [ 15.881] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 16.640] (II) Module glx: vendor="NVIDIA Corporation"
    [ 16.640] compiled for 4.0.2, module version = 1.0.0
    [ 16.640] Module class: X.Org Server Extension
    [ 16.640] (II) NVIDIA GLX Module 275.21 Mon Jul 18 14:55:52 PDT 2011
    [ 16.640] (II) Loading extension GLX
    [ 16.640] (II) LoadModule: "record"
    [ 16.641] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 16.645] (II) Module record: vendor="X.Org Foundation"
    [ 16.645] compiled for 1.10.3, module version = 1.13.0
    [ 16.645] Module class: X.Org Server Extension
    [ 16.645] ABI class: X.Org Server Extension, version 5.0
    [ 16.645] (II) Loading extension RECORD
    [ 16.645] (II) LoadModule: "dri"
    [ 16.645] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 16.661] (II) Module dri: vendor="X.Org Foundation"
    [ 16.661] compiled for 1.10.3, module version = 1.0.0
    [ 16.661] ABI class: X.Org Server Extension, version 5.0
    [ 16.661] (II) Loading extension XFree86-DRI
    [ 16.661] (II) LoadModule: "dri2"
    [ 16.661] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 16.662] (II) Module dri2: vendor="X.Org Foundation"
    [ 16.662] compiled for 1.10.3, module version = 1.2.0
    [ 16.662] ABI class: X.Org Server Extension, version 5.0
    [ 16.662] (II) Loading extension DRI2
    [ 16.662] (II) LoadModule: "nvidia"
    [ 16.662] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.709] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 16.709] compiled for 4.0.2, module version = 1.0.0
    [ 16.709] Module class: X.Org Video Driver
    [ 16.732] (II) NVIDIA dlloader X Driver 275.21 Mon Jul 18 14:38:30 PDT 2011
    [ 16.737] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 16.740] (++) using VT number 7
    [ 16.751] (II) Loading sub module "fb"
    [ 16.751] (II) LoadModule: "fb"
    [ 16.751] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.762] (II) Module fb: vendor="X.Org Foundation"
    [ 16.762] compiled for 1.10.3, module version = 1.0.0
    [ 16.762] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.762] (II) Loading sub module "wfb"
    [ 16.762] (II) LoadModule: "wfb"
    [ 16.763] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.769] (II) Module wfb: vendor="X.Org Foundation"
    [ 16.769] compiled for 1.10.3, module version = 1.0.0
    [ 16.769] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 16.769] (II) Loading sub module "ramdac"
    [ 16.769] (II) LoadModule: "ramdac"
    [ 16.769] (II) Module "ramdac" already built-in
    [ 16.771] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 16.771] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 16.780] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 16.780] (==) NVIDIA(0): RGB weight 888
    [ 16.780] (==) NVIDIA(0): Default visual is TrueColor
    [ 16.780] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 17.785] (II) NVIDIA(GPU-0): Display (Samsung SyncMaster (CRT-0)) does not support NVIDIA
    [ 17.785] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 17.789] (II) NVIDIA(0): NVIDIA GPU GeForce 8600 GT (G84) at PCI:1:0:0 (GPU-0)
    [ 17.789] (--) NVIDIA(0): Memory: 262144 kBytes
    [ 17.789] (--) NVIDIA(0): VideoBIOS: 60.84.35.00.00
    [ 17.789] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 17.789] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 17.789] (--) NVIDIA(0): Connected display device(s) on GeForce 8600 GT at PCI:1:0:0
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0)
    [ 17.789] (--) NVIDIA(0): Samsung SyncMaster (CRT-0): 400.0 MHz maximum pixel clock
    [ 17.859] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 17.859] (==) NVIDIA(0): will be used as the requested mode.
    [ 17.859] (==) NVIDIA(0):
    [ 17.859] (II) NVIDIA(0): Validated modes:
    [ 17.859] (II) NVIDIA(0): "nvidia-auto-select"
    [ 17.859] (II) NVIDIA(0): Virtual screen size determined to be 800 x 600
    [ 17.900] (--) NVIDIA(0): DPI set to (72, 72); computed from "UseEdidDpi" X config
    [ 17.900] (--) NVIDIA(0): option
    [ 17.900] (--) Depth 24 pixmap format is 32 bpp
    [ 17.901] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 17.905] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 17.905] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 17.905] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 17.905] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 17.905] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 17.905] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 17.905] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 17.905] (II) NVIDIA(0): Config Options in the README.
    [ 17.908] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 17.946] (II) Loading extension NV-GLX
    [ 18.001] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 18.002] (==) NVIDIA(0): Backing store disabled
    [ 18.002] (==) NVIDIA(0): Silken mouse enabled
    [ 18.002] (**) NVIDIA(0): DPMS enabled
    [ 18.002] (II) Loading extension NV-CONTROL
    [ 18.003] (II) Loading extension XINERAMA
    [ 18.003] (II) Loading sub module "dri2"
    [ 18.003] (II) LoadModule: "dri2"
    [ 18.003] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 18.003] (II) Module dri2: vendor="X.Org Foundation"
    [ 18.003] compiled for 1.10.3, module version = 1.2.0
    [ 18.003] ABI class: X.Org Server Extension, version 5.0
    [ 18.003] (II) NVIDIA(0): [DRI2] Setup complete
    [ 18.003] (==) RandR enabled
    [ 18.003] (II) Initializing built-in extension Generic Event Extension
    [ 18.003] (II) Initializing built-in extension SHAPE
    [ 18.003] (II) Initializing built-in extension MIT-SHM
    [ 18.003] (II) Initializing built-in extension XInputExtension
    [ 18.003] (II) Initializing built-in extension XTEST
    [ 18.003] (II) Initializing built-in extension BIG-REQUESTS
    [ 18.003] (II) Initializing built-in extension SYNC
    [ 18.003] (II) Initializing built-in extension XKEYBOARD
    [ 18.003] (II) Initializing built-in extension XC-MISC
    [ 18.003] (II) Initializing built-in extension SECURITY
    [ 18.003] (II) Initializing built-in extension XINERAMA
    [ 18.003] (II) Initializing built-in extension XFIXES
    [ 18.003] (II) Initializing built-in extension RENDER
    [ 18.003] (II) Initializing built-in extension RANDR
    [ 18.003] (II) Initializing built-in extension COMPOSITE
    [ 18.003] (II) Initializing built-in extension DAMAGE
    [ 18.005] (II) Initializing extension GLX
    [ 18.213] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 18.213] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.213] (II) LoadModule: "evdev"
    [ 18.213] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (II) Module evdev: vendor="X.Org Foundation"
    [ 18.214] compiled for 1.10.0, module version = 2.6.0
    [ 18.214] Module class: X.Org XInput Driver
    [ 18.214] ABI class: X.Org XInput driver, version 12.2
    [ 18.214] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.214] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.214] (**) Power Button: always reports core events
    [ 18.214] (**) Power Button: Device: "/dev/input/event3"
    [ 18.226] (--) Power Button: Found keys
    [ 18.226] (II) Power Button: Configuring as keyboard
    [ 18.226] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
    [ 18.226] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.226] (**) Option "xkb_rules" "evdev"
    [ 18.226] (**) Option "xkb_model" "evdev"
    [ 18.226] (**) Option "xkb_layout" "us"
    [ 18.252] (II) config/udev: Adding input device Power Button (/dev/input/event2)
    [ 18.252] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 18.252] (II) Using input driver 'evdev' for 'Power Button'
    [ 18.252] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.252] (**) Power Button: always reports core events
    [ 18.252] (**) Power Button: Device: "/dev/input/event2"
    [ 18.266] (--) Power Button: Found keys
    [ 18.266] (II) Power Button: Configuring as keyboard
    [ 18.266] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2/event2"
    [ 18.266] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 18.266] (**) Option "xkb_rules" "evdev"
    [ 18.266] (**) Option "xkb_model" "evdev"
    [ 18.266] (**) Option "xkb_layout" "us"
    [ 18.271] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/event1)
    [ 18.271] (**) Primax Electronics Wireless Mouse: Applying InputClass "evdev pointer catchall"
    [ 18.271] (II) Using input driver 'evdev' for 'Primax Electronics Wireless Mouse'
    [ 18.271] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.271] (**) Primax Electronics Wireless Mouse: always reports core events
    [ 18.271] (**) Primax Electronics Wireless Mouse: Device: "/dev/input/event1"
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found 3 mouse buttons
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found scroll wheel(s)
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found relative axes
    [ 18.283] (--) Primax Electronics Wireless Mouse: Found x and y relative axes
    [ 18.283] (II) Primax Electronics Wireless Mouse: Configuring as mouse
    [ 18.283] (II) Primax Electronics Wireless Mouse: Adding scrollwheel support
    [ 18.283] (**) Primax Electronics Wireless Mouse: YAxisMapping: buttons 4 and 5
    [ 18.283] (**) Primax Electronics Wireless Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 18.283] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1/event1"
    [ 18.283] (II) XINPUT: Adding extended input device "Primax Electronics Wireless Mouse" (type: MOUSE)
    [ 18.283] (II) Primax Electronics Wireless Mouse: initialized for relative axes.
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) keeping acceleration scheme 1
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration profile 0
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration factor: 2.000
    [ 18.283] (**) Primax Electronics Wireless Mouse: (accel) acceleration threshold: 4
    [ 18.283] (II) config/udev: Adding input device Primax Electronics Wireless Mouse (/dev/input/mouse0)
    [ 18.283] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event5)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.285] (II) config/udev: Adding input device HDA ATI SB Headphone (/dev/input/event6)
    [ 18.285] (II) No input driver/identifier specified (ignoring)
    [ 18.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 18.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 18.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 18.286] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 18.286] (**) AT Translated Set 2 keyboard: always reports core events
    [ 18.286] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 18.300] (--) AT Translated Set 2 keyboard: Found keys
    [ 18.300] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 18.300] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 18.300] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 18.300] (**) Option "xkb_rules" "evdev"
    [ 18.300] (**) Option "xkb_model" "evdev"
    [ 18.300] (**) Option "xkb_layout" "us"
    [ 18.300] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
    [ 18.300] (II) No input driver/identifier specified (ignoring)
    [ 1563.531] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 1563.587] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 1563.587] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 1563.587] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 1563.587] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 1563.587] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 1563.587] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 1563.587] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 1563.587] (II) NVIDIA(0): Config Options in the README.
    And the dmesg.log file contains this:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.39-ARCH (thomas@evey) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Sat Jul 9 15:31:04 CEST 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f400 (usable)
    [ 0.000000] BIOS-e820: 000000000009f400 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007fff0000 (usable)
    [ 0.000000] BIOS-e820: 000000007fff0000 - 000000007fff3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007fff3000 - 0000000080000000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.5 present.
    [ 0.000000] DMI: . ./AX78(AMD770+SB600), BIOS 6.00 PG 01/17/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7fff0 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-C7FFF write-protect
    [ 0.000000] C8000-CFFFF uncachable
    [ 0.000000] D0000-D3FFF write-back
    [ 0.000000] D4000-FFFFF uncachable
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask FF80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00f41f0] f41f0
    [ 0.000000] initial memory mapped : 0 - 01c00000
    [ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 1bfb000-1c00000
    [ 0.000000] RAMDISK: 7fdc9000 - 7ffe0000
    [ 0.000000] Allocated new RAMDISK: 375e7000 - 377fd792
    [ 0.000000] Move RAMDISK from 000000007fdc9000 - 000000007ffdf791 to 375e7000 - 377fd791
    [ 0.000000] ACPI: RSDP 000f81d0 00024 (v02 AMD770)
    [ 0.000000] ACPI: RSDT 7fff3000 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: FACP 7fff3080 00074 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: DSDT 7fff3100 051E2 (v01 AMD770 AWRDACPI 00001000 MSFT 03000000)
    [ 0.000000] ACPI: FACS 7fff0000 00040
    [ 0.000000] ACPI: SSDT 7fff83c0 002CC (v01 PTLTD POWERNOW 00000001 LTP 00000001)
    [ 0.000000] ACPI: HPET 7fff86c0 00038 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000098)
    [ 0.000000] ACPI: MCFG 7fff8700 0003C (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: APIC 7fff8300 00084 (v01 AMD770 AWRDACPI 42302E31 AWRD 00000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1159MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007fff0
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009f
    [ 0.000000] 0: 0x00000100 -> 0x0007fff0
    [ 0.000000] On node 0 totalpages: 524159
    [ 0.000000] free_area_init_node: node 0, pgdat c14a1980, node_mem_map f65e6200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3951 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2320 pages used for memmap
    [ 0.000000] HighMem zone: 294626 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] Detected use of extended apic ids on hypertransport bus
    [ 0.000000] ACPI: PM-Timer IO Port: 0x4008
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x10b9a201 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
    [ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:60000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27648 r0 d21504 u1048576
    [ 0.000000] pcpu-alloc: s27648 r0 d21504 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 520063
    [ 0.000000] Kernel command line: root=/dev/sda5 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] allocated 8388096 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007fff0)
    [ 0.000000] Memory: 2062632k/2097088k available (3376k kernel code, 34004k reserved, 1390k data, 512k init, 1187784k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc14a8000 - 0xc1528000 ( 512 kB)
    [ 0.000000] .data : 0xc134c3bf - 0xc14a7c00 (1390 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc134c3bf (3376 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f540c000 soft=f540e000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration failed
    [ 0.000000] TSC: Unable to calibrate against PIT
    [ 0.000000] TSC: using HPET reference calibration
    [ 0.000000] Detected 2700.236 MHz processor.
    [ 0.000000] Marking TSC unstable due to TSCs unsynchronized
    [ 0.016736] Calibrating delay loop (skipped), value calculated using timer frequency.. 5402.49 BogoMIPS (lpj=9000786)
    [ 0.016870] pid_max: default: 32768 minimum: 301
    [ 0.016983] Security Framework initialized
    [ 0.017051] AppArmor: AppArmor disabled by boot time parameter
    [ 0.017144] Mount-cache hash table entries: 512
    [ 0.017404] Initializing cgroup subsys ns
    [ 0.017471] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.017549] Initializing cgroup subsys cpuacct
    [ 0.017625] Initializing cgroup subsys memory
    [ 0.017701] Initializing cgroup subsys devices
    [ 0.017767] Initializing cgroup subsys freezer
    [ 0.017833] Initializing cgroup subsys net_cls
    [ 0.017899] Initializing cgroup subsys blkio
    [ 0.017995] CPU: Physical Processor ID: 0
    [ 0.018060] CPU: Processor Core ID: 0
    [ 0.018126] mce: CPU supports 5 MCE banks
    [ 0.018199] using C1E aware idle routine
    [ 0.019127] ACPI: Core revision 20110316
    [ 0.023362] ftrace: allocating 15225 entries in 30 pages
    [ 0.026734] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.027332] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061631] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 5200+ stepping 02
    [ 0.063329] Performance Events: AMD PMU driver.
    [ 0.063329] ... version: 0
    [ 0.063329] ... bit width: 48
    [ 0.063329] ... generic registers: 4
    [ 0.063329] ... value mask: 0000ffffffffffff
    [ 0.063329] ... max period: 00007fffffffffff
    [ 0.063329] ... fixed-purpose events: 0
    [ 0.063329] ... event mask: 000000000000000f
    [ 0.080086] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.106674] CPU 1 irqstacks, hard=f54b4000 soft=f54b6000
    [ 0.106676] Booting Node 0, Processors #1
    [ 0.106783] smpboot cpu 1: start_ip = 9b000
    [ 0.019998] Initializing CPU#1
    [ 0.200085] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.206657] Brought up 2 CPUs
    [ 0.206721] Total of 2 processors activated (10805.88 BogoMIPS).
    [ 0.207206] devtmpfs: initialized
    [ 0.207206] PM: Registering ACPI NVS region at 7fff0000 (12288 bytes)
    [ 0.207649] print_constraints: dummy:
    [ 0.207764] NET: Registered protocol family 16
    [ 0.207919] node 0 link 0: io port [c000, ffff]
    [ 0.207922] TOM: 0000000080000000 aka 2048M
    [ 0.207987] node 0 link 0: mmio [a0000, bffff]
    [ 0.207990] node 0 link 0: mmio [80000000, dfffffff]
    [ 0.207992] node 0 link 0: mmio [f0000000, fe02ffff]
    [ 0.207995] node 0 link 0: mmio [e0000000, e03fffff]
    [ 0.207997] bus: [00, 03] on node 0 link 0
    [ 0.208000] bus: 00 index 0 [io 0x0000-0xffff]
    [ 0.208002] bus: 00 index 1 [mem 0x000a0000-0x000bffff]
    [ 0.208003] bus: 00 index 2 [mem 0x80000000-0xefffffff]
    [ 0.208005] bus: 00 index 3 [mem 0xf0000000-0xffffffff]
    [ 0.208011] ACPI: bus type pci registered
    [ 0.208149] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.208227] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.208292] PCI: Using MMCONFIG for extended config space
    [ 0.208357] PCI: Using configuration type 1 for base access
    [ 0.208842] bio: create slab <bio-0> at 0
    [ 0.210574] ACPI: EC: Look up EC in DSDT
    [ 0.211181] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.214150] ACPI: Interpreter enabled
    [ 0.214220] ACPI: (supports S0 S3 S4 S5)
    [ 0.214501] ACPI: Using IOAPIC for interrupt routing
    [ 0.225790] ACPI: No dock devices found.
    [ 0.225854] HEST: Table not found.
    [ 0.225919] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.226037] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.226190] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.226257] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff]
    [ 0.226324] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.226399] pci_root PNP0A03:00: host bridge window [mem 0x000c0000-0x000dffff]
    [ 0.226474] pci_root PNP0A03:00: host bridge window [mem 0x80000000-0xffffffff]
    [ 0.226562] pci 0000:00:00.0: [1002:5957] type 0 class 0x000600
    [ 0.226576] pci 0000:00:00.0: reg 1c: [mem 0xe0000000-0xffffffff 64bit]
    [ 0.226609] pci 0000:00:02.0: [1002:5978] type 1 class 0x000604
    [ 0.226636] pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    [ 0.226639] pci 0000:00:02.0: PME# disabled
    [ 0.226667] pci 0000:00:0a.0: [1002:597f] type 1 class 0x000604
    [ 0.226693] pci 0000:00:0a.0: PME# supported from D0 D3hot D3cold
    [ 0.226696] pci 0000:00:0a.0: PME# disabled
    [ 0.226723] pci 0000:00:12.0: [1002:4380] type 0 class 0x000106
    [ 0.226742] pci 0000:00:12.0: reg 10: [io 0xff00-0xff07]
    [ 0.226752] pci 0000:00:12.0: reg 14: [io 0xfe00-0xfe03]
    [ 0.226763] pci 0000:00:12.0: reg 18: [io 0xfd00-0xfd07]
    [ 0.226773] pci 0000:00:12.0: reg 1c: [io 0xfc00-0xfc03]
    [ 0.226784] pci 0000:00:12.0: reg 20: [io 0xfb00-0xfb0f]
    [ 0.226794] pci 0000:00:12.0: reg 24: [mem 0xfe02f000-0xfe02f3ff]
    [ 0.226836] pci 0000:00:13.0: [1002:4387] type 0 class 0x000c03
    [ 0.226851] pci 0000:00:13.0: reg 10: [mem 0xfe02e000-0xfe02efff]
    [ 0.226919] pci 0000:00:13.1: [1002:4388] type 0 class 0x000c03
    [ 0.226933] pci 0000:00:13.1: reg 10: [mem 0xfe02d000-0xfe02dfff]
    [ 0.227002] pci 0000:00:13.2: [1002:4389] type 0 class 0x000c03
    [ 0.227016] pci 0000:00:13.2: reg 10: [mem 0xfe02c000-0xfe02cfff]
    [ 0.227084] pci 0000:00:13.3: [1002:438a] type 0 class 0x000c03
    [ 0.227099] pci 0000:00:13.3: reg 10: [mem 0xfe02b000-0xfe02bfff]
    [ 0.227166] pci 0000:00:13.4: [1002:438b] type 0 class 0x000c03
    [ 0.227181] pci 0000:00:13.4: reg 10: [mem 0xfe02a000-0xfe02afff]
    [ 0.227255] pci 0000:00:13.5: [1002:4386] type 0 class 0x000c03
    [ 0.227275] pci 0000:00:13.5: reg 10: [mem 0xfe029000-0xfe0290ff]
    [ 0.227351] pci 0000:00:13.5: supports D1 D2
    [ 0.227352] pci 0000:00:13.5: PME# supported from D0 D1 D2 D3hot
    [ 0.227357] pci 0000:00:13.5: PME# disabled
    [ 0.227379] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.227402] pci 0000:00:14.0: reg 10: [io 0x0b00-0x0b0f]
    [ 0.227483] pci 0000:00:14.1: [1002:438c] type 0 class 0x000101
    [ 0.227497] pci 0000:00:14.1: reg 10: [io 0x0000-0x0007]
    [ 0.227507] pci 0000:00:14.1: reg 14: [io 0x0000-0x0003]
    [ 0.227518] pci 0000:00:14.1: reg 18: [io 0x0000-0x0007]
    [ 0.227528] pci 0000:00:14.1: reg 1c: [io 0x0000-0x0003]
    [ 0.227538] pci 0000:00:14.1: reg 20: [io 0xf900-0xf90f]
    [ 0.227577] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.227600] pci 0000:00:14.2: reg 10: [mem 0xfe024000-0xfe027fff 64bit]
    [ 0.227663] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.227667] pci 0000:00:14.2: PME# disabled
    [ 0.227681] pci 0000:00:14.3: [1002:438d] type 0 class 0x000601
    [ 0.227759] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.227808] pci 0000:00:18.0: [1022:1100] type 0 class 0x000600
    [ 0.227823] pci 0000:00:18.1: [1022:1101] type 0 class 0x000600
    [ 0.227835] pci 0000:00:18.2: [1022:1102] type 0 class 0x000600
    [ 0.227848] pci 0000:00:18.3: [1022:1103] type 0 class 0x000600
    [ 0.227903] pci 0000:01:00.0: [10de:0402] type 0 class 0x000300
    [ 0.227914] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.227926] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.227937] pci 0000:01:00.0: reg 1c: [mem 0xf8000000-0xf9ffffff 64bit]
    [ 0.227945] pci 0000:01:00.0: reg 24: [io 0xdf00-0xdf7f]
    [ 0.227953] pci 0000:01:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233329] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.233396] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.233399] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.233404] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.233444] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
    [ 0.233462] pci 0000:02:00.0: reg 10: [mem 0xfdffc000-0xfdffffff 64bit]
    [ 0.233472] pci 0000:02:00.0: reg 18: [io 0xee00-0xeeff]
    [ 0.233505] pci 0000:02:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.233535] pci 0000:02:00.0: supports D1 D2
    [ 0.233537] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.233541] pci 0000:02:00.0: PME# disabled
    [ 0.239995] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.240062] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.240065] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.240069] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.240134] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.240203] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.240207] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.240212] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.240214] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.240217] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.240219] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.240221] pci 0000:00:14.4: bridge window [mem 0x000c0000-0x000dffff] (subtractive decode)
    [ 0.240224] pci 0000:00:14.4: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.240236] pci_bus 0000:00: on NUMA node 0
    [ 0.240239] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.240363] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P2P_._PRT]
    [ 0.240408] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    [ 0.240440] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCEA._PRT]
    [ 0.240465] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.240531] Unable to assume _OSC PCIe control. Disabling ASPM
    [ 0.251996] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.252665] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.253351] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254017] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.254684] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.255350] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257059] ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.257725] ACPI: PCI Interrupt Link [LNK1] (IRQs 3 4 5 6 7 10 11) *0, disabled.
    [ 0.258446] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.258522] vgaarb: loaded
    [ 0.258678] PCI: Using ACPI for IRQ routing
    [ 0.258742] PCI: pci_cache_line_size set to 64 bytes
    [ 0.258749] pci 0000:00:00.0: address space collision: [mem 0xe0000000-0xffffffff 64bit] conflicts with PCI Bus 0000:01 [mem 0xf8000000-0xfbffffff]
    [ 0.258890] reserve RAM buffer: 000000000009f400 - 000000000009ffff
    [ 0.258893] reserve RAM buffer: 000000007fff0000 - 000000007fffffff
    [ 0.259004] NetLabel: Initializing
    [ 0.259067] NetLabel: domain hash size = 128
    [ 0.259131] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.259205] NetLabel: unlabeled traffic allowed by default
    [ 0.259287] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.259608] hpet0: 4 comparators, 32-bit 14.318180 MHz counter
    [ 0.261015] Switching to clocksource hpet
    [ 0.261499] Switched to NOHz mode on CPU #0
    [ 0.261582] Switched to NOHz mode on CPU #1
    [ 0.266362] pnp: PnP ACPI init
    [ 0.266443] ACPI: bus type pnp registered
    [ 0.266593] pnp 00:00: [bus 00-ff]
    [ 0.266598] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.266600] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.266602] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.266604] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.266606] pnp 00:00: [mem 0x000c0000-0x000dffff window]
    [ 0.266609] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.266662] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 0.266792] pnp 00:01: [io 0x4100-0x411f]
    [ 0.266794] pnp 00:01: [io 0x0228-0x022f]
    [ 0.266796] pnp 00:01: [io 0x040b]
    [ 0.266798] pnp 00:01: [io 0x04d6]
    [ 0.266799] pnp 00:01: [io 0x0c00-0x0c01]
    [ 0.266801] pnp 00:01: [io 0x0c14]
    [ 0.266803] pnp 00:01: [io 0x0c50-0x0c52]
    [ 0.266805] pnp 00:01: [io 0x0c6c-0x0c6d]
    [ 0.266807] pnp 00:01: [io 0x0c6f]
    [ 0.266808] pnp 00:01: [io 0x0cd0-0x0cd1]
    [ 0.266810] pnp 00:01: [io 0x0cd2-0x0cd3]
    [ 0.266812] pnp 00:01: [io 0x0cd4-0x0cdf]
    [ 0.266814] pnp 00:01: [io 0x4000-0x40fe]
    [ 0.266815] pnp 00:01: [io 0x4210-0x4217]
    [ 0.266817] pnp 00:01: [io 0x0b10-0x0b1f]
    [ 0.266819] pnp 00:01: [mem 0x00000000-0x00000fff window]
    [ 0.266822] pnp 00:01: [mem 0xfee00400-0xfee00fff window]
    [ 0.266828] pnp 00:01: disabling [mem 0x00000000-0x00000fff window] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.266939] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:01:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267023] pnp 00:01: disabling [mem 0x00000000-0x00000fff window disabled] because it overlaps 0000:02:00.0 BAR 6 [mem 0x00000000-0x0001ffff pref]
    [ 0.267131] system 00:01: [io 0x4100-0x411f] has been reserved
    [ 0.267198] system 00:01: [io 0x0228-0x022f] has been reserved
    [ 0.267264] system 00:01: [io 0x040b] has been reserved
    [ 0.267330] system 00:01: [io 0x04d6] has been reserved
    [ 0.267395] system 00:01: [io 0x0c00-0x0c01] has been reserved
    [ 0.267461] system 00:01: [io 0x0c14] has been reserved
    [ 0.267530] system 00:01: [io 0x0c50-0x0c52] has been reserved
    [ 0.267596] system 00:01: [io 0x0c6c-0x0c6d] has been reserved
    [ 0.267662] system 00:01: [io 0x0c6f] has been reserved
    [ 0.267727] system 00:01: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.267793] system 00:01: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.267859] system 00:01: [io 0x0cd4-0x0cdf] has been reserved
    [ 0.267926] system 00:01: [io 0x4000-0x40fe] has been reserved
    [ 0.267992] system 00:01: [io 0x4210-0x4217] has been reserved
    [ 0.268058] system 00:01: [io 0x0b10-0x0b1f] has been reserved
    [ 0.268125] system 00:01: [mem 0xfee00400-0xfee00fff window] has been reserved
    [ 0.268201] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.268290] pnp 00:02: [dma 4]
    [ 0.268291] pnp 00:02: [io 0x0000-0x000f]
    [ 0.268293] pnp 00:02: [io 0x0080-0x0090]
    [ 0.268295] pnp 00:02: [io 0x0094-0x009f]
    [ 0.268297] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.268326] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.268366] pnp 00:03: [irq 0 disabled]
    [ 0.268380] pnp 00:03: [irq 8]
    [ 0.268382] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 0.268408] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.268430] pnp 00:04: [io 0x0070-0x0073]
    [ 0.268456] pnp 00:04: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.268463] pnp 00:05: [io 0x0061]
    [ 0.268488] pnp 00:05: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.268495] pnp 00:06: [io 0x00f0-0x00ff]
    [ 0.268504] pnp 00:06: [irq 13]
    [ 0.268535] pnp 00:06: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.268566] pnp 00:07: [io 0x0010-0x001f]
    [ 0.268567] pnp 00:07: [io 0x0022-0x003f]
    [ 0.268569] pnp 00:07: [io 0x0044-0x005f]
    [ 0.268571] pnp 00:07: [io 0x0062-0x0063]
    [ 0.268573] pnp 00:07: [io 0x0065-0x006f]
    [ 0.268575] pnp 00:07: [io 0x0074-0x007f]
    [ 0.268576] pnp 00:07: [io 0x0091-0x0093]
    [ 0.268578] pnp 00:07: [io 0x00a2-0x00bf]
    [ 0.268580] pnp 00:07: [io 0x00e0-0x00ef]
    [ 0.268582] pnp 00:07: [io 0x04d0-0x04d1]
    [ 0.268632] system 00:07: [io 0x04d0-0x04d1] has been reserved
    [ 0.268699] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.269033] pnp 00:08: [io 0x0060]
    [ 0.269034] pnp 00:08: [io 0x0064]
    [ 0.269043] pnp 00:08: [irq 1]
    [ 0.269080] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.269127] pnp 00:09: [mem 0x000f0000-0x000fffff]
    [ 0.269129] pnp 00:09: [mem 0x00000000-0x001fffff]
    [ 0.269131] pnp 00:09: [mem 0xfed00000-0xfed000ff]
    [ 0.269132] pnp 00:09: [mem 0x7fff0000-0x7fffffff]
    [ 0.269134] pnp 00:09: [mem 0xffff0000-0xffffffff]
    [ 0.269136] pnp 00:09: [mem 0x00000000-0x0009ffff]
    [ 0.269138] pnp 00:09: [mem 0x00100000-0x7ffeffff]
    [ 0.269140] pnp 00:09: [mem 0xfec00000-0xfec00fff]
    [ 0.269142] pnp 00:09: [mem 0xfee00000-0xfee00fff]
    [ 0.269144] pnp 00:09: [mem 0xfff80000-0xfffeffff]
    [ 0.269148] pnp 00:09: disabling [mem 0x000f0000-0x000fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269229] pnp 00:09: disabling [mem 0x00000000-0x001fffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269309] pnp 00:09: disabling [mem 0x00000000-0x0009ffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269390] pnp 00:09: disabling [mem 0x00100000-0x7ffeffff] because it overlaps 0000:00:00.0 BAR 3 [mem 0x00000000-0x1fffffff 64bit]
    [ 0.269519] system 00:09: [mem 0xfed00000-0xfed000ff] has been reserved
    [ 0.269587] system 00:09: [mem 0x7fff0000-0x7fffffff] could not be reserved
    [ 0.269654] system 00:09: [mem 0xffff0000-0xffffffff] has been reserved
    [ 0.269721] system 00:09: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.269788] system 00:09: [mem 0xfee00000-0xfee00fff] could not be reserved
    [ 0.269855] system 00:09: [mem 0xfff80000-0xfffeffff] has been reserved
    [ 0.269922] system 00:09: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.269930] pnp: PnP ACPI: found 10 devices
    [ 0.269994] ACPI: ACPI bus type pnp unregistered
    [ 0.306168] pci 0000:01:00.0: BAR 6: assigned [mem 0xfb000000-0xfb01ffff pref]
    [ 0.306245] pci 0000:00:02.0: PCI bridge to [bus 01-01]
    [ 0.306311] pci 0000:00:02.0: bridge window [io 0xd000-0xdfff]
    [ 0.306378] pci 0000:00:02.0: bridge window [mem 0xf8000000-0xfbffffff]
    [ 0.306445] pci 0000:00:02.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.306523] pci 0000:02:00.0: BAR 6: assigned [mem 0xfde00000-0xfde1ffff pref]
    [ 0.306598] pci 0000:00:0a.0: PCI bridge to [bus 02-02]
    [ 0.306664] pci 0000:00:0a.0: bridge window [io 0xe000-0xefff]
    [ 0.306741] pci 0000:00:0a.0: bridge window [mem 0xfdf00000-0xfdffffff]
    [ 0.306809] pci 0000:00:0a.0: bridge window [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.306886] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.306952] pci 0000:00:14.4: bridge window [io 0xc000-0xcfff]
    [ 0.307022] pci 0000:00:14.4: bridge window [mem 0xfdd00000-0xfddfffff]
    [ 0.307090] pci 0000:00:14.4: bridge window [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307175] pci 0000:00:02.0: setting latency timer to 64
    [ 0.307180] pci 0000:00:0a.0: setting latency timer to 64
    [ 0.307188] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.307190] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.307192] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307194] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307197] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307199] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 0.307201] pci_bus 0000:01: resource 1 [mem 0xf8000000-0xfbffffff]
    [ 0.307203] pci_bus 0000:01: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.307206] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.307208] pci_bus 0000:02: resource 1 [mem 0xfdf00000-0xfdffffff]
    [ 0.307210] pci_bus 0000:02: resource 2 [mem 0xfde00000-0xfdefffff 64bit pref]
    [ 0.307213] pci_bus 0000:03: resource 0 [io 0xc000-0xcfff]
    [ 0.307215] pci_bus 0000:03: resource 1 [mem 0xfdd00000-0xfddfffff]
    [ 0.307217] pci_bus 0000:03: resource 2 [mem 0xfdc00000-0xfdcfffff pref]
    [ 0.307219] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.307222] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.307224] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.307226] pci_bus 0000:03: resource 7 [mem 0x000c0000-0x000dffff]
    [ 0.307228] pci_bus 0000:03: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.307274] NET: Registered protocol family 2
    [ 0.307398] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.307694] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.308325] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.308652] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.308719] TCP reno registered
    [ 0.308783] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.308856] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.309050] NET: Registered protocol family 1
    [ 0.426742] pci 0000:01:00.0: Boot video device
    [ 0.426749] PCI: CLS 64 bytes, default 64
    [ 0.426800] Unpacking initramfs...
    [ 0.460291] Freeing initrd memory: 2140k freed
    [ 0.461639] apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
    [ 0.461707] apm: disabled - APM is not SMP safe.
    [ 0.461884] audit: initializing netlink socket (disabled)
    [ 0.461957] type=2000 audit(1312207987.459:1): initialized
    [ 0.462290] highmem bounce pool size: 64 pages
    [ 0.462357] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.464180] VFS: Disk quotas dquot_6.5.2
    [ 0.464312] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.464469] msgmni has been set to 1712
    [ 0.464730] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.464841] io scheduler noop registered
    [ 0.464907] io scheduler deadline registered
    [ 0.464983] io scheduler cfq registered (default)
    [ 0.465152] pcieport 0000:00:02.0: setting latency timer to 64
    [ 0.465180] pcieport 0000:00:02.0: irq 40 for MSI/MSI-X
    [ 0.465225] pcieport 0000:00:0a.0: setting latency timer to 64
    [ 0.465246] pcieport 0000:00:0a.0: irq 41 for MSI/MSI-X
    [ 0.465393] ERST: Table is not found!
    [ 0.465467] isapnp: Scanning for PnP cards...
    [ 0.822554] isapnp: No Plug & Play device found
    [ 0.822675] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.050031] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 1.050099] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 1.050669] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.050792] mousedev: PS/2 mouse device common for all mice
    [ 1.050892] rtc_cmos 00:04: RTC can wake from S4
    [ 1.074526] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.076767] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    [ 1.076869] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
    [ 1.076954] cpuidle: using governor ladder
    [ 1.077018] cpuidle: using governor menu
    [ 1.077281] TCP cubic registered
    [ 1.077345] NET: Registered protocol family 17
    [ 1.077415] Registering the dns_resolver key type
    [ 1.077492] Using IPI No-Shortcut mode
    [ 1.077626] PM: Hibernation image not present or could not be loaded.
    [ 1.077633] registered taskstats version 1
    [ 1.077987] rtc_cmos 00:04: setting system clock to 2011-08-01 14:13:08 UTC (1312207988)
    [ 1.078086] Initializing network drop monitor service
    [ 1.078222] Freeing unused kernel memory: 512k freed
    [ 1.078587] Write protecting the kernel text: 3380k
    [ 1.078672] Write protecting the kernel read-only data: 1028k
    [ 1.088713] udevd[47]: starting version 171
    [ 1.180160] SCSI subsystem initialized
    [ 1.197209] usbcore: registered new interface driver usbfs
    [ 1.197412] usbcore: registered new interface driver hub
    [ 1.197625] usbcore: registered new device driver usb
    [ 1.215729] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.215840] ehci_hcd 0000:00:13.5: PCI INT D -> GSI 19 (level, low) -> IRQ 19
    [ 1.215930] ehci_hcd 0000:00:13.5: EHCI Host Controller
    [ 1.216028] ehci_hcd 0000:00:13.5: new USB bus registered, assigned bus number 1
    [ 1.226748] ehci_hcd 0000:00:13.5: applying AMD SB600/SB700 USB freeze workaround
    [ 1.226842] ehci_hcd 0000:00:13.5: debug port 1
    [ 1.226937] ehci_hcd 0000:00:13.5: irq 19, io mem 0xfe029000
    [ 1.237087] libata version 3.00 loaded.
    [ 1.240040] ehci_hcd 0000:00:13.5: USB 2.0 started, EHCI 1.00
    [ 1.240292] hub 1-0:1.0: USB hub found
    [ 1.240359] hub 1-0:1.0: 10 ports detected
    [ 1.240733] pata_atiixp 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.241613] scsi0 : pata_atiixp
    [ 1.241804] scsi1 : pata_atiixp
    [ 1.242405] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xf900 irq 14
    [ 1.242472] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xf908 irq 15
    [ 1.244130] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 1.244228] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.244315] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 1.244390] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 2
    [ 1.250091] ohci_hcd 0000:00:13.0: irq 16, io mem 0xfe02e000
    [ 1.307508] hub 2-0:1.0: USB hub found
    [ 1.307579] hub 2-0:1.0: 2 ports detected
    [ 1.307730] ohci_hcd 0000:00:13.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.307813] ohci_hcd 0000:00:13.1: OHCI Host Controller
    [ 1.307889] ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 3
    [ 1.326729] ohci_hcd 0000:00:13.1: irq 17, io mem 0xfe02d000
    [ 1.384201] hub 3-0:1.0: USB hub found
    [ 1.384274] hub 3-0:1.0: 2 ports detected
    [ 1.384428] ohci_hcd 0000:00:13.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.384511] ohci_hcd 0000:00:13.2: OHCI Host Controller
    [ 1.384583] ohci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 1.405209] ohci_hcd 0000:00:13.2: irq 18, io mem 0xfe02c000
    [ 1.460849] hub 4-0:1.0: USB hub found
    [ 1.460923] hub 4-0:1.0: 2 ports detected
    [ 1.461068] ohci_hcd 0000:00:13.3: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.461149] ohci_hcd 0000:00:13.3: OHCI Host Controller
    [ 1.461220] ohci_hcd 0000:00:13.3: new USB bus registered, assigned bus number 5
    [ 1.480027] ohci_hcd 0000:00:13.3: irq 17, io mem 0xfe02b000
    [ 1.537463] hub 5-0:1.0: USB hub found
    [ 1.537533] hub 5-0:1.0: 2 ports detected
    [ 1.537661] ohci_hcd 0000:00:13.4: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.537735] ohci_hcd 0000:00:13.4: OHCI Host Controller
    [ 1.537805] ohci_hcd 0000:00:13.4: new USB bus registered, assigned bus number 6
    [ 1.553363] ohci_hcd 0000:00:13.4: irq 18, io mem 0xfe02a000
    [ 1.610820] hub 6-0:1.0: USB hub found
    [ 1.610890] hub 6-0:1.0: 2 ports detected
    [ 1.611025] ahci 0000:00:12.0: version 3.0
    [ 1.611043] ahci 0000:00:12.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 1.611127] ahci 0000:00:12.0: controller can't do 64bit DMA, forcing 32bit
    [ 1.611295] ahci 0000:00:12.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    [ 1.611377] ahci 0000:00:12.0: flags: ncq sntf ilck led clo pmp pio ccc
    [ 1.612922] scsi2 : ahci
    [ 1.613831] scsi3 : ahci
    [ 1.614815] scsi4 : ahci
    [ 1.614997] scsi5 : ahci
    [ 1.615170] ata3: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f100 irq 22
    [ 1.615247] ata4: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f180 irq 22
    [ 1.615324] ata5: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f200 irq 22
    [ 1.615400] ata6: SATA max UDMA/133 abar m1024@0xfe02f000 port 0xfe02f280 irq 22
    [ 1.933384] ata6: SATA link down (SStatus 0 SControl 300)
    [ 1.933527] ata5: SATA link down (SStatus 0 SControl 300)
    [ 2.063354] usb 6-2: new low speed USB device number 2 using ohci_hcd
    [ 2.106684] ata3: softreset failed (device not ready)
    [ 2.106751] ata3: applying SB600 PMP SRST workaround and retrying
    [ 2.106831] ata4: softreset failed (device not ready)
    [ 2.106897] ata4: applying SB600 PMP SRST workaround and retrying
    [ 2.273373] ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 2.273477] ata3: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 2.275971] ata4.00: ATAPI: HL-DT-ST DVDRAM GH20NS10, EL00, max UDMA/100
    [ 2.276040] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.278897] ata3.00: ATA-7: SAMSUNG HD161HJ, JF100-19, max UDMA7
    [ 2.278963] ata3.00: 312581808 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
    [ 2.279030] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279635] ata4.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.279701] ata4.00: configured for UDMA/100
    [ 2.284467] ata3.00: SB600 AHCI: limiting to 255 sectors per cmd
    [ 2.284533] ata3.00: configured for UDMA/133
    [ 2.284747] scsi 2:0:0:0: Direct-Access ATA SAMSUNG HD161HJ JF10 PQ: 0 ANSI: 5
    [ 2.397145] scsi 3:0:0:0: CD-ROM HL-DT-ST DVDRAM GH20NS10 EL00 PQ: 0 ANSI: 5
    [ 2.407639] sd 2:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
    [ 2.407755] sd 2:0:0:0: [sda] Write Protect is off
    [ 2.407821] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 2.407838] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 2.411375] input: Primax Electronics Wireless Mouse as /devices/pci0000:00/0000:00:13.4/usb6/6-2/6-2:1.0/input/input1
    [ 2.411568] generic-usb 0003:0461:4D25.0001: input,hiddev0,hidraw0: USB HID v1.10 Mouse [Primax Electronics Wireless Mouse] on usb-0000:00:13.4-2/input0
    [ 2.411669] usbcore: registered new interface driver usbhid
    [ 2.411745] usbhid: USB HID core driver
    [ 2.437927] sda: sda1 sda2 sda3 < sda5 >
    [ 2.438378] sd 2:0:0:0: [sda] Attached SCSI disk
    [ 2.518436] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 2.518516] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 2.518787] sr 3:0:0:0: Attached scsi CD-ROM sr0
    [ 2.959493] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 4.003984] udevd[255]: starting version 171
    [ 4.140765] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 4.140858] ACPI: Power Button [PWRB]
    [ 4.140981] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 4.141058] ACPI: Power Button [PWRF]
    [ 4.154881] Linux agpgart interface v0.103
    [ 4.157785] ACPI: Fan [FAN] (on)
    [ 4.158635] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 4.161972] ACPI: acpi_idle registered with cpuidle
    [ 4.162457] SP5100 TCO timer: mmio address 0xfec000f0 already in use
    [ 4.228336] sky2: driver version 1.28
    [ 4.228452] sky2 0000:02:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 4.228527] sky2 0000:02:00.0: setting latency timer to 64
    [ 4.228555] sky2 0000:02:00.0: Yukon-2 EC Ultra chip revision 5
    [ 4.228709] sky2 0000:02:00.0: irq 42 for MSI/MSI-X
    [ 4.228991] sky2 0000:02:00.0: eth0: addr 00:50:8d:ba:48:da
    [ 4.232113] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 4.250935] k8temp 0000:00:18.3: Temperature readouts might be wrong - check erratum #141
    [ 4.302867] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 4.356767] ACPI Warning: For \_TZ_.THRM._PSL: Return Package type mismatch at index 0 - found [NULL Object Descriptor], expected Reference (20110316/nspredef-1059)
    [ 4.356967] ACPI: Expecting a [Reference] package element, found type 0
    [ 4.357033] ACPI: Invalid passive threshold
    [ 4.363965] sd 2:0:0:0: Attached scsi generic sg0 type 0
    [ 4.364111] sr 3:0:0:0: Attached scsi generic sg1 type 5
    [ 4.476288] nvidia: module license 'NVIDIA' taints kernel.
    [ 4.476360] Disabling lock debugging due to kernel taint
    [ 4.556743] thermal LNXTHERM:00: registered as thermal_zone0
    [ 4.556813] ACPI: Thermal Zone [THRM] (44 C)
    [ 4.691172] HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 4.775620] hda_codec: ALC888: BIOS auto-probing.
    [ 4.777062] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:14.2/input/input5
    [ 4.781547] input: HDA ATI SB Headphone as /devices/pci0000:00/0000:00:14.2/sound/card0/input6
    [ 5.638691] nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 5.638769] nvidia 0000:01:00.0: setting latency timer to 64
    [ 5.638774] vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    [ 5.639105] NVRM: loading NVIDIA UNIX x86 Kernel Module 275.21 Mon Jul 18 14:37:03 PDT 2011
    [ 5.886530] EXT4-fs (sda5): re-mounted. Opts: (null)
    [ 5.965890] Adding 996024k swap on /dev/sda2. Priority:-1 extents:1 across:996024k
    Last edited by Fuentes (2011-08-16 22:44:13)

    the contents of /home/user/.xsession-errors
    startkde: Starting up...
    Connecting to deprecated signal QDBusConnectionInterface::serviceOwnerChanged(QString,QString,QString)
    kbuildsycoca4 running...
    kded(920) LayoutMemoryPersister::restoreFromFile: Failed to open layout memory xml file for reading "/home/alvaro/.kde4/share/apps/kded/session/keyboard/layout_memory.xml" error: 5
    kded(920)/kdecore (KConfigSkeleton) KCoreConfigSkeleton::writeConfig:
    No outputs have backlight property
    QDBusConnection: name 'org.kde.kglobalaccel' had owner '' but we thought it was ':1.5'
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Invalid D-BUS member name 'idle-hint' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'is-local' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'x11-display' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'display-device' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'remote-host-name' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'session-type' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    Invalid D-BUS member name 'unix-user' found in interface 'org.freedesktop.ConsoleKit.Session' while parsing introspection
    QDBusObjectPath: invalid path ""
    QDBusObjectPath: invalid path ""
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00141
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0x8bf31cc
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00141
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00143
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00143
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00145
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00145
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00147
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00147
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e00149
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e00149
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014b
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014b
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014d
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014d
    X Error: BadValue (integer parameter out of range for operation) 2
    Major opcode: 53 (X_CreatePixmap)
    Resource id: 0x0
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Major opcode: 14 (X_GetGeometry)
    Resource id: 0x1e0014f
    X Error: BadWindow (invalid Window parameter) 3
    Major opcode: 3 (X_GetWindowAttributes)
    Resource id: 0xb6d1bef4
    QPainter::begin: Cannot paint on a null pixmap
    X Error: BadDrawable (invalid Pixmap or Window parameter) 9
    Extension: 152 (RENDER)
    Minor opcode: 4 (RenderCreatePicture)
    Resource id: 0x1e0014f
    Object::connect: No such signal QDBusAbstractInterface::Changed()
    Object::connect: No such signal KWindowSystem::windowChanged(WId,unsigned long*)
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kwin(977): Compositing is not possible
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::brightness: org.kde.powerdevil.backlighthelper.brightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    kded(920) PowerDevilUPowerBackend::setBrightness: org.kde.powerdevil.backlighthelper.setbrightness failed
    QProcess: Destroyed while process is still running.
    plasma-desktop(1001): Communication problem with "plasma-desktop" , it probably crashed.
    Error message was: "org.freedesktop.DBus.Error.Disconnected" : " "Connection was disconnected before a reply was received" "
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    klauncher: Exiting on signal 1
    kglobalaccel: Fatal IO error: client killed
    kdeinit4: Fatal IO error: client killed
    kdeinit4: sending SIGHUP to children.
    ksmserver: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.
    kded4: Fatal IO error: client killed
    kdeinit4: sending SIGTERM to children.
    kdeinit4: Exit.

  • How to decrease mouse speed (easy question, can't find answer)

    Hello Archers. I bought a new mouse which has a resolution of 800 DPI and no option to change it like game mice have (a button that changes colors when you change resolution with it). After connecting it to my Arch box it turned out to be faster then what I got used to with my previous mice that had an option to choose DPI. I would like to decrease speed of my pointer in IceWM Xorg. I don't have DE, just Xorg and IceWM.
    xset m 0 0
    won't do it, it just sets acceleration to 0. And apparently doesn't even work on newest systems.
    Tried to add
    Option "Resolution" "600"
    to "xorg.conf" to try to change mouse resolution to 600 DPI and it had no effect.
    There is also popular answer for this search query but it doesn't seem to answer my case. If I type in
    xinput list
    I have
    ⎜ ↳ USB OPTICAL MOUSE id=8 [slave pointer (2)]
    as my mouse. Now
    xinput list-props 8
    and I get
    Device ' USB OPTICAL MOUSE':
    Device Enabled (141): 1
    Coordinate Transformation Matrix (143): 1.000000, 0.000000, 0.000000, 0.000000, 1.000000, 0.000000, 0.000000, 0.000000, 1.000000
    Device Product ID (259): 0, 1336
    Device Node (260): "/dev/input/event2"
    Evdev Axis Inversion (268): 0, 0
    Evdev Axes Swap (270): 0
    Axis Labels (271): "Rel X" (151), "Rel Y" (152), "Rel Vert Wheel" (263)
    Button Labels (272): "Button Left" (144), "Button Middle" (145), "Button Right" (146), "Button Wheel Up" (147), "Button Wheel Down" (148), "Button Horiz Wheel Left" (149), "Button Horiz Wheel Right" (150)
    Evdev Scrolling Distance (273): 1, 1, 1
    Evdev Middle Button Emulation (274): 0
    Evdev Middle Button Timeout (275): 50
    Evdev Third Button Emulation (276): 0
    Evdev Third Button Emulation Timeout (277): 1000
    Evdev Third Button Emulation Button (278): 3
    Evdev Third Button Emulation Threshold (279): 20
    Evdev Wheel Emulation (280): 0
    Evdev Wheel Emulation Axes (281): 0, 0, 4, 5
    Evdev Wheel Emulation Inertia (282): 10
    Evdev Wheel Emulation Timeout (283): 200
    Evdev Wheel Emulation Button (284): 4
    Evdev Drag Lock Buttons (285): 0
    Luke in that answer pointed out "Device Accel Constant Deceleration (267): 2.500000" which I don't seem to have. So are there any working ways to decrease pointer speed in Xorg for Arch?
    An LQ.org forum member suggested to look at wiki page which I did and the left solution also didn't help. Creating file "/etc/X11/xorg.conf.d/50-mouse-deceleration.conf" with the config wiki suggests doesn't decrease mouse speed. Please help me to do it.

    Ok, bad dice. Last throw from me: Did you install: https://www.archlinux.org/packages/?sor … nput-mouse ?
    man mouse_drv wrote:Option "Sensitivity" "float"
                  Mouse movements are multiplied by this float before  being  pro‐
                  cessed.  Use  this  mechanism to slow down high resolution mice.
                  Because values bigger than 1.0 will result in not all pixels  on
                  the  screen being accessible, you should better use mouse accel‐
                  eration (see man xset) for  speeding  up  low  resolution  mice.
                  Default: 1.0

  • I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

    i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
    Is this possible and how do i do that?
    Anyone who responds thanks for that!
    Juko
    I am running
    Hardware Overview:
      Model Name:          Mac Pro
      Model Identifier:          MacPro1,1
      Processor Name:          Dual-Core Intel Xeon
      Processor Speed:          2,66 GHz
      Number of Processors:          2
      Total Number of Cores:          4
      L2 Cache (per Processor):          4 MB
      Memory:          6 GB
      Bus Speed:          1,33 GHz
      Boot ROM Version:          MP11.005D.B00
      SMC Version (system):          1.7f10
      Serial Number (system):          CK7XXXXXXGP
      Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
    System Software Overview:
      System Version:          Mac OS X 10.7.5 (11G63)
      Kernel Version:          Darwin 11.4.2
      Boot Volume:          Macintosh HD(2)
      Boot Mode:          Normal
      Computer Name:          Mac Pro van Juko de Vries
      User Name:          Juko de Vries (jukodevries)
      Secure Virtual Memory:          Enabled
      64-bit Kernel and Extensions:          No
      Time since boot:          11 days 20:39
    Message was edited by Host

    Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
    Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

  • [SOLVED] Xorg freeze with nvidia GeForce 210 when resizing terminal

    Hello,
    I am working on Archlinux. My computer freeze when I resize a terminal window.
    To reproduce the problem, I follow the below steps :
         1- launch openbox (with tint2, xcompmgr and nitrogen)
         2- start the "terminal" console emulator (with true transparent background)
         3- launch opera and go to a website which take a while to load (with a lot of data) (I used http://www.lemonde.fr)
         4- while the website is loading, switch to the terminal window and double click on the title bar to maximize it
         5- the box freeze
    I am not able to take the control back. I cannot exit or kill Xorg / Openbox. I cannot switch to a text terminal (ttyx). No key sequence is working.
    Only a hard reset of the box is working.
    I have tried to disable the transparent background of the terminal window without success.
    I have tried to not start xcompmgr without success.
    The problem also occurs with rxvt-unicode instead of terminal.
    It seems the problem happens more often when using console emulator based on vte.
    vte itself has the same issue.
    The only workaround I have found is to disable the harware acceleration with the below parameter in the xorg.conf file:
    Option    "RenderAccel"    "true"
    The problem with this workaround are poor graphical performances.
    Could you please let me know if you have any idea / clue to identify / fix this problem ?
    Thanks and regards
    uname -a
    Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686 Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz GenuineIntel GNU/Linux
    versions
    nvidia 270.41.06-1
    nvidia-utils 270.41.06-1
    kernel26 2.6.38.4-1
    openbox 3.4.11.2-2
    xcompmgr 1.1.5-1
    .xinitrc
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    # exec gnome-session
    # exec startkde
    # exec startxfce4
    # ...or the Window Manager of your choice
    exec ck-launch-session openbox-session
    .config/openbox/autostart.sh
    # This shell script is run before Openbox launches.
    # Environment variables set here are passed to the Openbox session.
    # Set a background color
    BG=""
    if which hsetroot >/dev/null 2>&1; then
    BG=hsetroot
    else
    if which esetroot >/dev/null 2>&1; then
    BG=esetroot
    else
    if which xsetroot >/dev/null 2>&1; then
    BG=xsetroot
    fi
    fi
    fi
    test -z $BG || $BG -solid "#303030"
    # D-bus
    if which dbus-launch >/dev/null 2>&1 && test -z "$DBUS_SESSION_BUS_ADDRESS"; then
    eval `dbus-launch --sh-syntax --exit-with-session`
    fi
    # Make GTK apps look and behave how they were set up in the gnome config tools
    if test -x /usr/libexec/gnome-settings-daemon >/dev/null; then
    /usr/libexec/gnome-settings-daemon &
    elif which gnome-settings-daemon >/dev/null 2>&1; then
    gnome-settings-daemon &
    # Make GTK apps look and behave how they were set up in the XFCE config tools
    elif which xfce-mcs-manager >/dev/null 2>&1; then
    xfce-mcs-manager n &
    fi
    # Preload stuff for KDE apps
    if which start_kdeinit >/dev/null 2>&1; then
    LD_BIND_NOW=true start_kdeinit --new-startup +kcminit_startup &
    fi
    # Run XDG autostart things. By default don't run anything desktop-specific
    # See xdg-autostart --help more info
    DESKTOP_ENV="OPENBOX"
    if which /usr/lib/openbox/xdg-autostart >/dev/null 2>&1; then
    /usr/lib/openbox/xdg-autostart $DESKTOP_ENV
    fi
    xcompmgr &
    nitrogen --set-zoom-fill /mnt/data/pictures/flower.jpg &
    tint2 &
    xorg.conf
    Section "ServerLayout"
    Identifier "X.org Configured"
    Screen 0 "Screen0" 0 0
    InputDevice "Mouse0" "CorePointer"
    InputDevice "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
    ModulePath "/usr/lib/xorg/modules"
    FontPath "/usr/share/fonts/misc/"
    FontPath "/usr/share/fonts/TTF/"
    FontPath "/usr/share/fonts/OTF/"
    FontPath "/usr/share/fonts/Type1/"
    FontPath "/usr/share/fonts/100dpi/"
    FontPath "/usr/share/fonts/75dpi/"
    EndSection
    Section "Module"
    Load "extmod"
    Load "glx"
    Load "record"
    Load "dbe"
    Load "dri2"
    EndSection
    Section "InputClass"
    Identifier "Keyboard Defaults"
    MatchIsKeyboard "yes"
    Option "XkbLayout" "fr"
    EndSection
    Section "InputDevice"
    Identifier "Keyboard0"
    Driver "kbd"
    EndSection
    Section "InputDevice"
    Identifier "Mouse0"
    Driver "mouse"
    Option "Protocol" "auto"
    Option "Device" "/dev/input/mice"
    Option "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Monitor Vendor"
    ModelName "Monitor Model"
    EndSection
    Section "Device"
    Identifier "Card0"
    Driver "nvidia"
    Option "RenderAccel" "true"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Card0"
    Monitor "Monitor0"
    SubSection "Display"
    Viewport 0 0
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 4
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 8
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 15
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 16
    EndSubSection
    SubSection "Display"
    Viewport 0 0
    Depth 24
    EndSubSection
    EndSection
    Section "Extensions"
    Option "Composite" "Enable"
    EndSection
    Xorg.0.log
    [ 485.566]
    X.Org X Server 1.10.1
    Release Date: 2011-04-15
    [ 485.566] X Protocol Version 11, Revision 0
    [ 485.566] Build Operating System: Linux 2.6.38-ARCH i686
    [ 485.566] Current Operating System: Linux myhost 2.6.38-ARCH #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011 i686
    [ 485.566] Kernel command line: root=/dev/sda3 ro
    [ 485.566] Build Date: 16 April 2011 12:05:35PM
    [ 485.566]
    [ 485.566] Current version of pixman: 0.20.2
    [ 485.567] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 485.567] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 485.567] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Apr 27 20:00:28 2011
    [ 485.567] (==) Using config file: "/etc/X11/xorg.conf"
    [ 485.568] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 485.568] (==) ServerLayout "X.org Configured"
    [ 485.568] (**) |-->Screen "Screen0" (0)
    [ 485.568] (**) | |-->Monitor "Monitor0"
    [ 485.568] (**) | |-->Device "Card0"
    [ 485.568] (**) |-->Input Device "Mouse0"
    [ 485.568] (**) |-->Input Device "Keyboard0"
    [ 485.568] (==) Automatically adding devices
    [ 485.568] (==) Automatically enabling devices
    [ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 485.568] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 485.568] Entry deleted from font path.
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 485.568] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 485.568] Entry deleted from font path.
    [ 485.568] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 485.568] (**) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 485.568] (**) ModulePath set to "/usr/lib/xorg/modules"
    [ 485.568] (**) Extension "Composite" is enabled
    [ 485.568] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 485.568] (WW) Disabling Mouse0
    [ 485.568] (WW) Disabling Keyboard0
    [ 485.568] (II) Loader magic: 0x81f4ee0
    [ 485.568] (II) Module ABI versions:
    [ 485.568] X.Org ANSI C Emulation: 0.4
    [ 485.568] X.Org Video Driver: 10.0
    [ 485.568] X.Org XInput driver : 12.2
    [ 485.568] X.Org Server Extension : 5.0
    [ 485.569] (--) PCI:*(0:1:0:0) 10de:0a65:1043:8334 rev 162, Mem @ 0xfa000000/16777216, 0xd0000000/268435456, 0xce000000/33554432, I/O @ 0x0000bc00/128, BIOS @ 0x????????/524288
    [ 485.569] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 485.569] (II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "record" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) "dri" will be loaded by default.
    [ 485.569] (II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
    [ 485.569] (II) LoadModule: "extmod"
    [ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 485.569] (II) Module extmod: vendor="X.Org Foundation"
    [ 485.569] compiled for 1.10.1, module version = 1.0.0
    [ 485.569] Module class: X.Org Server Extension
    [ 485.569] ABI class: X.Org Server Extension, version 5.0
    [ 485.569] (II) Loading extension MIT-SCREEN-SAVER
    [ 485.569] (II) Loading extension XFree86-VidModeExtension
    [ 485.569] (II) Loading extension XFree86-DGA
    [ 485.569] (II) Loading extension DPMS
    [ 485.569] (II) Loading extension XVideo
    [ 485.569] (II) Loading extension XVideo-MotionCompensation
    [ 485.569] (II) Loading extension X-Resource
    [ 485.569] (II) LoadModule: "glx"
    [ 485.569] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 485.588] (II) Module glx: vendor="NVIDIA Corporation"
    [ 485.588] compiled for 4.0.2, module version = 1.0.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] (II) NVIDIA GLX Module 270.41.06 Mon Apr 18 15:11:28 PDT 2011
    [ 485.589] (II) Loading extension GLX
    [ 485.589] (II) LoadModule: "record"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 485.589] (II) Module record: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.13.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension RECORD
    [ 485.589] (II) LoadModule: "dbe"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 485.589] (II) Module dbe: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.0.0
    [ 485.589] Module class: X.Org Server Extension
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension DOUBLE-BUFFER
    [ 485.589] (II) LoadModule: "dri2"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 485.589] (II) Module dri2: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.2.0
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension DRI2
    [ 485.589] (II) LoadModule: "dri"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 485.589] (II) Module dri: vendor="X.Org Foundation"
    [ 485.589] compiled for 1.10.1, module version = 1.0.0
    [ 485.589] ABI class: X.Org Server Extension, version 5.0
    [ 485.589] (II) Loading extension XFree86-DRI
    [ 485.589] (II) LoadModule: "nvidia"
    [ 485.589] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 485.590] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 485.590] compiled for 4.0.2, module version = 1.0.0
    [ 485.590] Module class: X.Org Video Driver
    [ 485.590] (II) NVIDIA dlloader X Driver 270.41.06 Mon Apr 18 14:55:51 PDT 2011
    [ 485.590] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 485.590] (--) using VT number 7
    [ 485.593] (II) Loading sub module "fb"
    [ 485.593] (II) LoadModule: "fb"
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 485.593] (II) Module fb: vendor="X.Org Foundation"
    [ 485.593] compiled for 1.10.1, module version = 1.0.0
    [ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 485.593] (II) Loading sub module "wfb"
    [ 485.593] (II) LoadModule: "wfb"
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 485.593] (II) Module wfb: vendor="X.Org Foundation"
    [ 485.593] compiled for 1.10.1, module version = 1.0.0
    [ 485.593] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 485.593] (II) Loading sub module "ramdac"
    [ 485.593] (II) LoadModule: "ramdac"
    [ 485.593] (II) Module "ramdac" already built-in
    [ 485.593] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 485.593] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 485.593] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 485.593] (==) NVIDIA(0): RGB weight 888
    [ 485.593] (==) NVIDIA(0): Default visual is TrueColor
    [ 485.593] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 485.593] (**) NVIDIA(0): Option "RenderAccel" "true"
    [ 485.593] (**) NVIDIA(0): Enabling RENDER acceleration
    [ 485.953] (II) NVIDIA(GPU-0): Display (LG Electronics L222W (CRT-0)) does not support NVIDIA
    [ 485.953] (II) NVIDIA(GPU-0): 3D Vision stereo.
    [ 485.986] (II) NVIDIA(GPU-0): Display (PANASONIC-TV (DFP-1)) does not support NVIDIA 3D
    [ 485.986] (II) NVIDIA(GPU-0): Vision stereo.
    [ 485.987] (II) NVIDIA(0): NVIDIA GPU GeForce 210 (GT218) at PCI:1:0:0 (GPU-0)
    [ 485.987] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 485.987] (--) NVIDIA(0): VideoBIOS: 70.18.39.00.17
    [ 485.987] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 485.987] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 485.987] (--) NVIDIA(0): Connected display device(s) on GeForce 210 at PCI:1:0:0
    [ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0)
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1)
    [ 485.987] (--) NVIDIA(0): LG Electronics L222W (CRT-0): 400.0 MHz maximum pixel clock
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): 165.0 MHz maximum pixel clock
    [ 485.987] (--) NVIDIA(0): PANASONIC-TV (DFP-1): Internal Single Link TMDS
    [ 486.026] (II) NVIDIA(0): Assigned Display Device: CRT-0
    [ 486.026] (==) NVIDIA(0):
    [ 486.026] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 486.026] (==) NVIDIA(0): will be used as the requested mode.
    [ 486.026] (==) NVIDIA(0):
    [ 486.026] (II) NVIDIA(0): Validated modes:
    [ 486.026] (II) NVIDIA(0): "nvidia-auto-select"
    [ 486.026] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
    [ 486.054] (--) NVIDIA(0): DPI set to (90, 88); computed from "UseEdidDpi" X config
    [ 486.054] (--) NVIDIA(0): option
    [ 486.054] (--) Depth 24 pixmap format is 32 bpp
    [ 486.054] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 486.056] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 486.056] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 486.056] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 486.056] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 486.056] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 486.056] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 486.056] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 486.056] (II) NVIDIA(0): Config Options in the README.
    [ 486.058] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 486.286] (II) Loading extension NV-GLX
    [ 486.314] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 486.314] (==) NVIDIA(0): Backing store disabled
    [ 486.314] (==) NVIDIA(0): Silken mouse enabled
    [ 486.314] (==) NVIDIA(0): DPMS enabled
    [ 486.314] (II) Loading extension NV-CONTROL
    [ 486.315] (II) Loading extension XINERAMA
    [ 486.315] (II) Loading sub module "dri2"
    [ 486.315] (II) LoadModule: "dri2"
    [ 486.315] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 486.315] (II) Module dri2: vendor="X.Org Foundation"
    [ 486.315] compiled for 1.10.1, module version = 1.2.0
    [ 486.315] ABI class: X.Org Server Extension, version 5.0
    [ 486.315] (II) NVIDIA(0): [DRI2] Setup complete
    [ 486.315] (==) RandR enabled
    [ 486.315] (II) Initializing built-in extension Generic Event Extension
    [ 486.315] (II) Initializing built-in extension SHAPE
    [ 486.315] (II) Initializing built-in extension MIT-SHM
    [ 486.315] (II) Initializing built-in extension XInputExtension
    [ 486.315] (II) Initializing built-in extension XTEST
    [ 486.315] (II) Initializing built-in extension BIG-REQUESTS
    [ 486.315] (II) Initializing built-in extension SYNC
    [ 486.315] (II) Initializing built-in extension XKEYBOARD
    [ 486.315] (II) Initializing built-in extension XC-MISC
    [ 486.315] (II) Initializing built-in extension SECURITY
    [ 486.315] (II) Initializing built-in extension XINERAMA
    [ 486.315] (II) Initializing built-in extension XFIXES
    [ 486.315] (II) Initializing built-in extension RENDER
    [ 486.315] (II) Initializing built-in extension RANDR
    [ 486.315] (II) Initializing built-in extension COMPOSITE
    [ 486.315] (II) Initializing built-in extension DAMAGE
    [ 486.317] (II) Initializing extension GLX
    [ 486.364] (II) config/udev: Adding input device Power Button (/dev/input/event1)
    [ 486.364] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 486.364] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 486.364] (II) LoadModule: "evdev"
    [ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.365] (II) Module evdev: vendor="X.Org Foundation"
    [ 486.365] compiled for 1.10.0, module version = 2.6.0
    [ 486.365] Module class: X.Org XInput Driver
    [ 486.365] ABI class: X.Org XInput driver, version 12.2
    [ 486.365] (II) Using input driver 'evdev' for 'Power Button'
    [ 486.365] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.365] (**) Power Button: always reports core events
    [ 486.365] (**) Power Button: Device: "/dev/input/event1"
    [ 486.376] (--) Power Button: Found keys
    [ 486.376] (II) Power Button: Configuring as keyboard
    [ 486.376] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
    [ 486.376] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 486.376] (**) Option "xkb_rules" "evdev"
    [ 486.376] (**) Option "xkb_model" "evdev"
    [ 486.376] (**) Option "xkb_layout" "fr"
    [ 486.397] (II) config/udev: Adding input device Power Button (/dev/input/event0)
    [ 486.397] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 486.397] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 486.397] (II) Using input driver 'evdev' for 'Power Button'
    [ 486.397] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.397] (**) Power Button: always reports core events
    [ 486.397] (**) Power Button: Device: "/dev/input/event0"
    [ 486.413] (--) Power Button: Found keys
    [ 486.413] (II) Power Button: Configuring as keyboard
    [ 486.413] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
    [ 486.413] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 486.413] (**) Option "xkb_rules" "evdev"
    [ 486.413] (**) Option "xkb_model" "evdev"
    [ 486.413] (**) Option "xkb_layout" "fr"
    [ 486.415] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event2)
    [ 486.415] (II) No input driver/identifier specified (ignoring)
    [ 486.418] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event3)
    [ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 486.418] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.418] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 486.418] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.418] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 486.418] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event3"
    [ 486.430] (--) Microsoft Wired Keyboard 600: Found keys
    [ 486.430] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 486.430] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.0/input/input3/event3"
    [ 486.430] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
    [ 486.430] (**) Option "xkb_rules" "evdev"
    [ 486.430] (**) Option "xkb_model" "evdev"
    [ 486.430] (**) Option "xkb_layout" "fr"
    [ 486.430] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/event4)
    [ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "evdev keyboard catchall"
    [ 486.430] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.430] (II) Using input driver 'evdev' for 'Microsoft Wired Keyboard 600'
    [ 486.430] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.430] (**) Microsoft Wired Keyboard 600: always reports core events
    [ 486.430] (**) Microsoft Wired Keyboard 600: Device: "/dev/input/event4"
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found 1 mouse buttons
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found scroll wheel(s)
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found relative axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found absolute axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found x and y absolute axes
    [ 486.446] (--) Microsoft Wired Keyboard 600: Found keys
    [ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as mouse
    [ 486.446] (II) Microsoft Wired Keyboard 600: Configuring as keyboard
    [ 486.446] (II) Microsoft Wired Keyboard 600: Adding scrollwheel support
    [ 486.446] (**) Microsoft Wired Keyboard 600: YAxisMapping: buttons 4 and 5
    [ 486.446] (**) Microsoft Wired Keyboard 600: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 486.446] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-1/9-1:1.1/input/input4/event4"
    [ 486.446] (II) XINPUT: Adding extended input device "Microsoft Wired Keyboard 600" (type: KEYBOARD)
    [ 486.446] (**) Option "xkb_rules" "evdev"
    [ 486.446] (**) Option "xkb_model" "evdev"
    [ 486.446] (**) Option "xkb_layout" "fr"
    [ 486.447] (EE) Microsoft Wired Keyboard 600: failed to initialize for relative axes.
    [ 486.447] (WW) Microsoft Wired Keyboard 600: found 37 axes, limiting to 36.
    [ 486.447] (II) Microsoft Wired Keyboard 600: initialized for absolute axes.
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) keeping acceleration scheme 1
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration profile 0
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration factor: 2.000
    [ 486.447] (**) Microsoft Wired Keyboard 600: (accel) acceleration threshold: 4
    [ 486.447] (II) config/udev: Adding input device Microsoft Wired Keyboard 600 (/dev/input/js0)
    [ 486.447] (**) Microsoft Wired Keyboard 600: Applying InputClass "Keyboard Defaults"
    [ 486.447] (II) No input driver/identifier specified (ignoring)
    [ 486.447] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event5)
    [ 486.447] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 486.447] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
    [ 486.447] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 486.447] (**) Logitech USB Optical Mouse: always reports core events
    [ 486.447] (**) Logitech USB Optical Mouse: Device: "/dev/input/event5"
    [ 486.473] (--) Logitech USB Optical Mouse: Found 12 mouse buttons
    [ 486.473] (--) Logitech USB Optical Mouse: Found scroll wheel(s)
    [ 486.473] (--) Logitech USB Optical Mouse: Found relative axes
    [ 486.473] (--) Logitech USB Optical Mouse: Found x and y relative axes
    [ 486.473] (II) Logitech USB Optical Mouse: Configuring as mouse
    [ 486.473] (II) Logitech USB Optical Mouse: Adding scrollwheel support
    [ 486.473] (**) Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 486.473] (**) Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 486.473] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb9/9-2/9-2:1.0/input/input5/event5"
    [ 486.473] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE)
    [ 486.473] (II) Logitech USB Optical Mouse: initialized for relative axes.
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
    [ 486.473] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
    [ 486.473] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
    [ 486.473] (II) No input driver/identifier specified (ignoring)
    [ 525.530] (WW) NVIDIA(0): The NVIDIA X driver has encountered too many errors. Falling
    [ 525.530] (WW) NVIDIA(0): back to write-back cached memory.
    dmesg.txt
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 2.6.38-ARCH (tobias@T-POWA-LX) (gcc version 4.6.0 20110415 (prerelease) (GCC) ) #1 SMP PREEMPT Fri Apr 22 17:48:36 UTC 2011
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009ec00 (usable)
    [ 0.000000] BIOS-e820: 000000000009ec00 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 000000007ff90000 (usable)
    [ 0.000000] BIOS-e820: 000000007ff90000 - 000000007ff9e000 (ACPI data)
    [ 0.000000] BIOS-e820: 000000007ff9e000 - 000000007ffe0000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffb00000 - 0000000100000000 (reserved)
    [ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
    [ 0.000000] DMI 2.4 present.
    [ 0.000000] DMI: System manufacturer System Product Name/P5B-Deluxe, BIOS 1238 09/30/2008
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] last_pfn = 0x7ff90 max_arch_pfn = 0x100000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-DFFFF uncachable
    [ 0.000000] E0000-EFFFF write-through
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 disabled
    [ 0.000000] 2 disabled
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [c00ff780] ff780
    [ 0.000000] initial memory mapped : 0 - 01800000
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000377fe000
    [ 0.000000] 0000000000 - 0000400000 page 4k
    [ 0.000000] 0000400000 - 0037400000 page 2M
    [ 0.000000] 0037400000 - 00377fe000 page 4k
    [ 0.000000] kernel direct mapping tables up to 377fe000 @ 17fb000-1800000
    [ 0.000000] RAMDISK: 7fdd0000 - 7ff80000
    [ 0.000000] Allocated new RAMDISK: 3764e000 - 377fd262
    [ 0.000000] Move RAMDISK from 000000007fdd0000 - 000000007ff7f261 to 3764e000 - 377fd261
    [ 0.000000] ACPI: RSDP 000fae70 00024 (v02 ACPIAM)
    [ 0.000000] ACPI: XSDT 7ff90100 0004C (v01 MSTEST OEMXSDT 09000830 MSFT 00000097)
    [ 0.000000] ACPI: FACP 7ff90290 000F4 (v03 MSTEST OEMFACP 09000830 MSFT 00000097)
    [ 0.000000] ACPI: DSDT 7ff905c0 0918E (v01 A0483 A0483035 00000035 INTL 20060113)
    [ 0.000000] ACPI: FACS 7ff9e000 00040
    [ 0.000000] ACPI: APIC 7ff90390 0006C (v01 MSTEST OEMAPIC 09000830 MSFT 00000097)
    [ 0.000000] ACPI: MCFG 7ff90400 0003C (v01 MSTEST OEMMCFG 09000830 MSFT 00000097)
    [ 0.000000] ACPI: OEMB 7ff9e040 0007B (v01 MSTEST AMI_OEM 09000830 MSFT 00000097)
    [ 0.000000] ACPI: HPET 7ff99750 00038 (v01 MSTEST OEMHPET 09000830 MSFT 00000097)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] 1159MB HIGHMEM available.
    [ 0.000000] 887MB LOWMEM available.
    [ 0.000000] mapped low ram: 0 - 377fe000
    [ 0.000000] low ram: 0 - 377fe000
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] Normal 0x00001000 -> 0x000377fe
    [ 0.000000] HighMem 0x000377fe -> 0x0007ff90
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[2] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x0007ff90
    [ 0.000000] On node 0 totalpages: 524062
    [ 0.000000] free_area_init_node: node 0, pgdat c1450b00, node_mem_map f664d200
    [ 0.000000] DMA zone: 32 pages used for memmap
    [ 0.000000] DMA zone: 0 pages reserved
    [ 0.000000] DMA zone: 3950 pages, LIFO batch:0
    [ 0.000000] Normal zone: 1744 pages used for memmap
    [ 0.000000] Normal zone: 221486 pages, LIFO batch:31
    [ 0.000000] HighMem zone: 2320 pages used for memmap
    [ 0.000000] HighMem zone: 294530 pages, LIFO batch:31
    [ 0.000000] Using APIC driver default
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a202 base: 0xfed00000
    [ 0.000000] SMP: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e4000
    [ 0.000000] PM: Registered nosave memory: 00000000000e4000 - 0000000000100000
    [ 0.000000] Allocating PCI resources starting at 80000000 (gap: 80000000:7ee00000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 12 pages/cpu @f6000000 s27392 r0 d21760 u1048576
    [ 0.000000] pcpu-alloc: s27392 r0 d21760 u1048576 alloc=1*4194304
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 519966
    [ 0.000000] Kernel command line: root=/dev/sda3 ro
    [ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
    [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    [ 0.000000] Initializing CPU#0
    [ 0.000000] xsave/xrstor: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] allocated 10483200 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Initializing HighMem for node 0 (000377fe:0007ff90)
    [ 0.000000] Memory: 2061020k/2096704k available (3182k kernel code, 35228k reserved, 1259k data, 424k init, 1187400k highmem)
    [ 0.000000] virtual kernel memory layout:
    [ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
    [ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    [ 0.000000] vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    [ 0.000000] lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    [ 0.000000] .init : 0xc1457000 - 0xc14c1000 ( 424 kB)
    [ 0.000000] .data : 0xc131bacb - 0xc1456a00 (1259 kB)
    [ 0.000000] .text : 0xc1000000 - 0xc131bacb (3182 kB)
    [ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptable hierarchical RCU implementation.
    [ 0.000000] RCU-based detection of stalled CPUs is disabled.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:512
    [ 0.000000] CPU 0 irqstacks, hard=f500c000 soft=f500e000
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 3066.221 MHz processor.
    [ 0.003336] Calibrating delay loop (skipped), value calculated using timer frequency.. 6134.96 BogoMIPS (lpj=10220736)
    [ 0.003418] pid_max: default: 32768 minimum: 301
    [ 0.003486] Security Framework initialized
    [ 0.003528] AppArmor: AppArmor disabled by boot time parameter
    [ 0.006682] Mount-cache hash table entries: 512
    [ 0.006865] Initializing cgroup subsys ns
    [ 0.006906] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup.
    [ 0.006960] Initializing cgroup subsys cpuacct
    [ 0.007007] Initializing cgroup subsys memory
    [ 0.007052] Initializing cgroup subsys devices
    [ 0.007092] Initializing cgroup subsys freezer
    [ 0.007133] Initializing cgroup subsys net_cls
    [ 0.007172] Initializing cgroup subsys blkio
    [ 0.007238] CPU: Physical Processor ID: 0
    [ 0.007277] CPU: Processor Core ID: 0
    [ 0.007317] mce: CPU supports 6 MCE banks
    [ 0.007361] CPU0: Thermal monitoring enabled (TM2)
    [ 0.007402] using mwait in idle threads.
    [ 0.008216] ACPI: Core revision 20110112
    [ 0.013386] Enabling APIC mode: Flat. Using 1 I/O APICs
    [ 0.013726] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.046907] CPU0: Intel(R) Core(TM)2 Duo CPU E7600 @ 3.06GHz stepping 0a
    [ 0.049997] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
    [ 0.049997] ... version: 2
    [ 0.049997] ... bit width: 40
    [ 0.049997] ... generic registers: 2
    [ 0.049997] ... value mask: 000000ffffffffff
    [ 0.049997] ... max period: 000000007fffffff
    [ 0.049997] ... fixed-purpose events: 3
    [ 0.049997] ... event mask: 0000000700000003
    [ 0.056745] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.070012] CPU 1 irqstacks, hard=f50d6000 soft=f50d8000
    [ 0.070017] Booting Node 0, Processors #1
    [ 0.006666] Initializing CPU#1
    [ 0.166676] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.169997] Brought up 2 CPUs
    [ 0.170040] Total of 2 processors activated (12270.81 BogoMIPS).
    [ 0.171248] devtmpfs: initialized
    [ 0.171248] NET: Registered protocol family 16
    [ 0.171248] ACPI: bus type pci registered
    [ 0.171248] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.171248] PCI: not using MMCONFIG
    [ 0.171248] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=5
    [ 0.171248] PCI: Using configuration type 1 for base access
    [ 0.171248] bio: create slab <bio-0> at 0
    [ 0.173388] ACPI: EC: Look up EC in DSDT
    [ 0.174194] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.179022] ACPI: SSDT 7ff9e0c0 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.179316] ACPI: Dynamic OEM Table Load:
    [ 0.179408] ACPI: SSDT (null) 00208 (v01 AMI CPU1PM 00000001 INTL 20060113)
    [ 0.179643] ACPI: SSDT 7ff9e2d0 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.179932] ACPI: Dynamic OEM Table Load:
    [ 0.180025] ACPI: SSDT (null) 0013A (v01 AMI CPU2PM 00000001 INTL 20060113)
    [ 0.180248] ACPI: Interpreter enabled
    [ 0.180292] ACPI: (supports S0 S3 S4 S5)
    [ 0.180445] ACPI: Using IOAPIC for interrupt routing
    [ 0.180500] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.180904] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources
    [ 0.180958] PCI: Using MMCONFIG for extended config space
    [ 0.185933] ACPI: No dock devices found.
    [ 0.185973] HEST: Table not found.
    [ 0.186014] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.186114] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.186260] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.186304] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.186346] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.186398] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff]
    [ 0.186450] pci_root PNP0A08:00: host bridge window [mem 0x80000000-0xffffffff]
    [ 0.186509] pci 0000:00:00.0: [8086:29a0] type 0 class 0x000600
    [ 0.186539] pci 0000:00:01.0: [8086:29a1] type 1 class 0x000604
    [ 0.186562] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.186564] pci 0000:00:01.0: PME# disabled
    [ 0.186592] pci 0000:00:1a.0: [8086:2834] type 0 class 0x000c03
    [ 0.186625] pci 0000:00:1a.0: reg 20: [io 0xa880-0xa89f]
    [ 0.186660] pci 0000:00:1a.1: [8086:2835] type 0 class 0x000c03
    [ 0.186692] pci 0000:00:1a.1: reg 20: [io 0xac00-0xac1f]
    [ 0.186724] pci 0000:00:1a.7: [8086:283a] type 0 class 0x000c03
    [ 0.186740] pci 0000:00:1a.7: reg 10: [mem 0xf9fffc00-0xf9ffffff]
    [ 0.186797] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.186801] pci 0000:00:1a.7: PME# disabled
    [ 0.186817] pci 0000:00:1b.0: [8086:284b] type 0 class 0x000403
    [ 0.186829] pci 0000:00:1b.0: reg 10: [mem 0xf9ff8000-0xf9ffbfff 64bit]
    [ 0.186873] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.186876] pci 0000:00:1b.0: PME# disabled
    [ 0.186891] pci 0000:00:1c.0: [8086:283f] type 1 class 0x000604
    [ 0.186935] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.186938] pci 0000:00:1c.0: PME# disabled
    [ 0.186956] pci 0000:00:1c.4: [8086:2847] type 1 class 0x000604
    [ 0.187000] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.187003] pci 0000:00:1c.4: PME# disabled
    [ 0.187019] pci 0000:00:1c.5: [8086:2849] type 1 class 0x000604
    [ 0.187063] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.187066] pci 0000:00:1c.5: PME# disabled
    [ 0.187082] pci 0000:00:1d.0: [8086:2830] type 0 class 0x000c03
    [ 0.187114] pci 0000:00:1d.0: reg 20: [io 0xa400-0xa41f]
    [ 0.187137] pci 0000:00:1d.1: [8086:2831] type 0 class 0x000c03
    [ 0.187170] pci 0000:00:1d.1: reg 20: [io 0xa480-0xa49f]
    [ 0.187193] pci 0000:00:1d.2: [8086:2832] type 0 class 0x000c03
    [ 0.187226] pci 0000:00:1d.2: reg 20: [io 0xa800-0xa81f]
    [ 0.187256] pci 0000:00:1d.7: [8086:2836] type 0 class 0x000c03
    [ 0.187272] pci 0000:00:1d.7: reg 10: [mem 0xf9fff800-0xf9fffbff]
    [ 0.187329] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.187333] pci 0000:00:1d.7: PME# disabled
    [ 0.187346] pci 0000:00:1e.0: [8086:244e] type 1 class 0x000604
    [ 0.187393] pci 0000:00:1f.0: [8086:2810] type 0 class 0x000601
    [ 0.187462] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003)
    [ 0.188664] pci 0000:00:1f.2: [8086:2821] type 0 class 0x000106
    [ 0.188677] pci 0000:00:1f.2: reg 10: [io 0xa080-0xa087]
    [ 0.188684] pci 0000:00:1f.2: reg 14: [io 0xa000-0xa003]
    [ 0.188690] pci 0000:00:1f.2: reg 18: [io 0x9c00-0x9c07]
    [ 0.188696] pci 0000:00:1f.2: reg 1c: [io 0x9880-0x9883]
    [ 0.188703] pci 0000:00:1f.2: reg 20: [io 0x9800-0x981f]
    [ 0.188709] pci 0000:00:1f.2: reg 24: [mem 0xf9fff000-0xf9fff7ff]
    [ 0.188733] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.188736] pci 0000:00:1f.2: PME# disabled
    [ 0.188747] pci 0000:00:1f.3: [8086:283e] type 0 class 0x000c05
    [ 0.188756] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff]
    [ 0.188778] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f]
    [ 0.188824] pci 0000:01:00.0: [10de:0a65] type 0 class 0x000300
    [ 0.188832] pci 0000:01:00.0: reg 10: [mem 0xfa000000-0xfaffffff]
    [ 0.188841] pci 0000:01:00.0: reg 14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.188849] pci 0000:01:00.0: reg 1c: [mem 0xce000000-0xcfffffff 64bit pref]
    [ 0.188856] pci 0000:01:00.0: reg 24: [io 0xbc00-0xbc7f]
    [ 0.188862] pci 0000:01:00.0: reg 30: [mem 0xfbc00000-0xfbc7ffff pref]
    [ 0.188895] pci 0000:01:00.1: [10de:0be3] type 0 class 0x000403
    [ 0.188903] pci 0000:01:00.1: reg 10: [mem 0xfbcfc000-0xfbcfffff]
    [ 0.188969] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.189011] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    [ 0.189014] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
    [ 0.189017] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.189048] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    [ 0.189091] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.189094] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.189098] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.189144] pci 0000:03:00.0: [197b:2363] type 0 class 0x000101
    [ 0.189223] pci 0000:03:00.0: reg 24: [mem 0xfbefe000-0xfbefffff]
    [ 0.189236] pci 0000:03:00.0: reg 30: [mem 0xfbee0000-0xfbeeffff pref]
    [ 0.189263] pci 0000:03:00.0: PME# supported from D3hot
    [ 0.189268] pci 0000:03:00.0: PME# disabled
    [ 0.189293] pci 0000:03:00.1: [197b:2363] type 0 class 0x000101
    [ 0.189315] pci 0000:03:00.1: reg 10: [io 0xdc00-0xdc07]
    [ 0.189327] pci 0000:03:00.1: reg 14: [io 0xd880-0xd883]
    [ 0.189339] pci 0000:03:00.1: reg 18: [io 0xd800-0xd807]
    [ 0.189351] pci 0000:03:00.1: reg 1c: [io 0xd480-0xd483]
    [ 0.189363] pci 0000:03:00.1: reg 20: [io 0xd400-0xd40f]
    [ 0.189426] pci 0000:03:00.0: disabling ASPM on pre-1.1 PCIe device. You can enable it with 'pcie_aspm=force'
    [ 0.189491] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.189533] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.189536] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.189540] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.189589] pci 0000:02:00.0: [11ab:4364] type 0 class 0x000200
    [ 0.189609] pci 0000:02:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit]
    [ 0.189620] pci 0000:02:00.0: reg 18: [io 0xc800-0xc8ff]
    [ 0.189658] pci 0000:02:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref]
    [ 0.189693] pci 0000:02:00.0: supports D1 D2
    [ 0.189694] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.189698] pci 0000:02:00.0: PME# disabled
    [ 0.193338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.193385] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.193390] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.193397] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.193434] pci 0000:05:02.0: [1033:0035] type 0 class 0x000c03
    [ 0.193452] pci 0000:05:02.0: reg 10: [mem 0xfbffd000-0xfbffdfff]
    [ 0.193514] pci 0000:05:02.0: supports D1 D2
    [ 0.193516] pci 0000:05:02.0: PME# supported from D0 D1 D2 D3hot
    [ 0.193519] pci 0000:05:02.0: PME# disabled
    [ 0.193533] pci 0000:05:02.1: [1033:0035] type 0 class 0x000c03
    [ 0.193546] pci 0000:05:02.1: reg 10: [mem 0xfbffe000-0xfbffefff]
    [ 0.193601] pci 0000:05:02.1: supports D1 D2
    [ 0.193602] pci 0000:05:02.1: PME# supported from D0 D1 D2 D3hot
    [ 0.193605] pci 0000:05:02.1: PME# disabled
    [ 0.193619] pci 0000:05:02.2: [1033:00e0] type 0 class 0x000c03
    [ 0.193633] pci 0000:05:02.2: reg 10: [mem 0xfbfffc00-0xfbfffcff]
    [ 0.193687] pci 0000:05:02.2: supports D1 D2
    [ 0.193689] pci 0000:05:02.2: PME# supported from D0 D1 D2 D3hot
    [ 0.193692] pci 0000:05:02.2: PME# disabled
    [ 0.193711] pci 0000:05:03.0: [104c:8023] type 0 class 0x000c00
    [ 0.193726] pci 0000:05:03.0: reg 10: [mem 0xfbfff000-0xfbfff7ff]
    [ 0.193735] pci 0000:05:03.0: reg 14: [mem 0xfbff8000-0xfbffbfff]
    [ 0.193786] pci 0000:05:03.0: supports D1 D2
    [ 0.193787] pci 0000:05:03.0: PME# supported from D0 D1 D2 D3hot
    [ 0.193791] pci 0000:05:03.0: PME# disabled
    [ 0.193806] pci 0000:05:04.0: [11ab:4320] type 0 class 0x000200
    [ 0.193823] pci 0000:05:04.0: reg 10: [mem 0xfbff4000-0xfbff7fff]
    [ 0.193831] pci 0000:05:04.0: reg 14: [io 0xe800-0xe8ff]
    [ 0.193867] pci 0000:05:04.0: reg 30: [mem 0xfbfc0000-0xfbfdffff pref]
    [ 0.193886] pci 0000:05:04.0: supports D1 D2
    [ 0.193888] pci 0000:05:04.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.193891] pci 0000:05:04.0: PME# disabled
    [ 0.193926] pci 0000:00:1e.0: PCI bridge to [bus 05-05] (subtractive decode)
    [ 0.193971] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.193974] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.193978] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.193980] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.193982] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.193983] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.193985] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode)
    [ 0.193987] pci 0000:00:1e.0: bridge window [mem 0x80000000-0xffffffff] (subtractive decode)
    [ 0.194003] pci_bus 0000:00: on NUMA node 0
    [ 0.194005] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.194127] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
    [ 0.194156] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.194243] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT]
    [ 0.194277] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT]
    [ 0.194313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT]
    [ 0.194355] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.199969] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.200342] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
    [ 0.200724] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
    [ 0.201105] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 11 12 14 *15)
    [ 0.201486] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 *11 12 14 15)
    [ 0.201868] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 *14 15)
    [ 0.202249] ACPI: PCI Interrupt Link [LNKG] (IRQs *3 4 5 6 7 10 11 12 14 15)
    [ 0.202634] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 *7 10 11 12 14 15)
    [ 0.203051] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.203107] vgaarb: loaded
    [ 0.203206] PCI: Using ACPI for IRQ routing
    [ 0.203247] PCI: pci_cache_line_size set to 64 bytes
    [ 0.203358] reserve RAM buffer: 000000000009ec00 - 000000000009ffff
    [ 0.203360] reserve RAM buffer: 000000007ff90000 - 000000007fffffff
    [ 0.203439] NetLabel: Initializing
    [ 0.203478] NetLabel: domain hash size = 128
    [ 0.203518] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.203565] NetLabel: unlabeled traffic allowed by default
    [ 0.203608] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
    [ 0.203653] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.203797] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
    [ 0.210012] Switching to clocksource hpet
    [ 0.211034] pnp: PnP ACPI init
    [ 0.211084] ACPI: bus type pnp registered
    [ 0.211173] pnp 00:00: [bus 00-ff]
    [ 0.211175] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.211177] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.211179] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.211180] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.211182] pnp 00:00: [mem 0x000d0000-0x000dffff window]
    [ 0.211184] pnp 00:00: [mem 0x80000000-0xffffffff window]
    [ 0.211222] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.211229] pnp 00:01: [mem 0xfed14000-0xfed19fff]
    [ 0.211267] system 00:01: [mem 0xfed14000-0xfed19fff] has been reserved
    [ 0.211311] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.211335] pnp 00:02: [dma 4]
    [ 0.211337] pnp 00:02: [io 0x0000-0x000f]
    [ 0.211338] pnp 00:02: [io 0x0081-0x0083]
    [ 0.211339] pnp 00:02: [io 0x0087]
    [ 0.211341] pnp 00:02: [io 0x0089-0x008b]
    [ 0.211342] pnp 00:02: [io 0x008f]
    [ 0.211343] pnp 00:02: [io 0x00c0-0x00df]
    [ 0.211367] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.211374] pnp 00:03: [io 0x0070-0x0071]
    [ 0.211380] pnp 00:03: [irq 8]
    [ 0.211403] pnp 00:03: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.211412] pnp 00:04: [io 0x0061]
    [ 0.211435] pnp 00:04: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.211441] pnp 00:05: [io 0x00f0-0x00ff]
    [ 0.211444] pnp 00:05: [irq 13]
    [ 0.211469] pnp 00:05: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.211669] pnp 00:06: [irq 4]
    [ 0.211671] pnp 00:06: [dma 0 disabled]
    [ 0.211672] pnp 00:06: [io 0x03f8-0x03ff]
    [ 0.211721] pnp 00:06: Plug and Play ACPI device, IDs PNP0501 (active)
    [ 0.211835] pnp 00:07: [io 0x0000-0xffffffff disabled]
    [ 0.211837] pnp 00:07: [io 0x0000-0xffffffff disabled]
    [ 0.211838] pnp 00:07: [io 0x0290-0x0297]
    [ 0.211879] system 00:07: [io 0x0290-0x0297] has been reserved
    [ 0.211922] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.211997] pnp 00:08: [io 0x0010-0x001f]
    [ 0.211999] pnp 00:08: [io 0x0022-0x003f]
    [ 0.212000] pnp 00:08: [io 0x0044-0x005f]
    [ 0.212002] pnp 00:08: [io 0x0062-0x0063]
    [ 0.212003] pnp 00:08: [io 0x0065-0x006f]
    [ 0.212004] pnp 00:08: [io 0x0072-0x007f]
    [ 0.212006] pnp 00:08: [io 0x0080]
    [ 0.212007] pnp 00:08: [io 0x0084-0x0086]
    [ 0.212008] pnp 00:08: [io 0x0088]
    [ 0.212010] pnp 00:08: [io 0x008c-0x008e]
    [ 0.212011] pnp 00:08: [io 0x0090-0x009f]
    [ 0.212012] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.212014] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.212015] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.212016] pnp 00:08: [io 0x0800-0x087f]
    [ 0.212018] pnp 00:08: [io 0x0400-0x03ff disabled]
    [ 0.212019] pnp 00:08: [io 0x0480-0x04bf]
    [ 0.212021] pnp 00:08: [mem 0xffafe000-0xffb0cbff]
    [ 0.212022] pnp 00:08: [mem 0xffb00000-0xffbfffff]
    [ 0.212024] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.212025] pnp 00:08: [mem 0xfed20000-0xfed8ffff]
    [ 0.212026] pnp 00:08: [mem 0xfff00000-0xfffffffe]
    [ 0.212028] pnp 00:08: [mem 0xfebfe000-0xfebfec00]
    [ 0.212089] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.212132] system 00:08: [io 0x0800-0x087f] has been reserved
    [ 0.212174] system 00:08: [io 0x0480-0x04bf] has been reserved
    [ 0.212216] system 00:08: [mem 0xffafe000-0xffb0cbff] could not be reserved
    [ 0.212259] system 00:08: [mem 0xffb00000-0xffbfffff] has been reserved
    [ 0.212302] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.212345] system 00:08: [mem 0xfed20000-0xfed8ffff] has been reserved
    [ 0.212388] system 00:08: [mem 0xfff00000-0xfffffffe] has been reserved
    [ 0.212430] system 00:08: [mem 0xfebfe000-0xfebfec00] has been reserved
    [ 0.212473] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212521] pnp 00:09: [mem 0xfed00000-0xfed003ff]
    [ 0.212547] pnp 00:09: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.212580] pnp 00:0a: [mem 0xfec00000-0xfec00fff]
    [ 0.212581] pnp 00:0a: [mem 0xfee00000-0xfee00fff]
    [ 0.212625] system 00:0a: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.212668] system 00:0a: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.212712] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212761] pnp 00:0b: [mem 0xe0000000-0xefffffff]
    [ 0.212801] system 00:0b: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.212844] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.212967] pnp 00:0c: [mem 0x00000000-0x0009ffff]
    [ 0.212969] pnp 00:0c: [mem 0x000c0000-0x000cffff]
    [ 0.212971] pnp 00:0c: [mem 0x000e0000-0x000fffff]
    [ 0.212972] pnp 00:0c: [mem 0x00100000-0x7fffffff]
    [ 0.212974] pnp 00:0c: [mem 0x00000000-0xffffffff disabled]
    [ 0.213025] system 00:0c: [mem 0x00000000-0x0009ffff] could not be reserved
    [ 0.213068] system 00:0c: [mem 0x000c0000-0x000cffff] could not be reserved
    [ 0.213111] system 00:0c: [mem 0x000e0000-0x000fffff] could not be reserved
    [ 0.213154] system 00:0c: [mem 0x00100000-0x7fffffff] could not be reserved
    [ 0.213198] system 00:0c: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.213198] Switched to NOHz mode on CPU #0
    [ 0.213237] Switched to NOHz mode on CPU #1
    [ 0.213286] pnp: PnP ACPI: found 13 devices
    [ 0.213326] ACPI: ACPI bus type pnp unregistered
    [ 0.249481] pci 0000:00:1c.0: BAR 14: assigned [mem 0x80000000-0x803fffff]
    [ 0.249526] pci 0000:00:1c.4: BAR 15: assigned [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.249579] pci 0000:00:1c.5: BAR 15: assigned [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.249632] pci 0000:00:1c.0: BAR 13: assigned [io 0x1000-0x1fff]
    [ 0.249675] pci 0000:00:1f.3: BAR 0: assigned [mem 0x80800000-0x808000ff]
    [ 0.249720] pci 0000:00:1f.3: BAR 0: set to [mem 0x80800000-0x808000ff] (PCI address [0x80800000-0x808000ff])
    [ 0.249775] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 0.249816] pci 0000:00:01.0: bridge window [io 0xb000-0xbfff]
    [ 0.249859] pci 0000:00:01.0: bridge window [mem 0xfa000000-0xfbcfffff]
    [ 0.249902] pci 0000:00:01.0: bridge window [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.249956] pci 0000:00:1c.0: PCI bridge to [bus 04-04]
    [ 0.250011] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff]
    [ 0.250055] pci 0000:00:1c.0: bridge window [mem 0x80000000-0x803fffff]
    [ 0.250099] pci 0000:00:1c.0: bridge window [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.250154] pci 0000:00:1c.4: PCI bridge to [bus 03-03]
    [ 0.250195] pci 0000:00:1c.4: bridge window [io 0xd000-0xdfff]
    [ 0.250239] pci 0000:00:1c.4: bridge window [mem 0xfbe00000-0xfbefffff]
    [ 0.250283] pci 0000:00:1c.4: bridge window [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.250338] pci 0000:00:1c.5: PCI bridge to [bus 02-02]
    [ 0.250380] pci 0000:00:1c.5: bridge window [io 0xc000-0xcfff]
    [ 0.250424] pci 0000:00:1c.5: bridge window [mem 0xfbd00000-0xfbdfffff]
    [ 0.250468] pci 0000:00:1c.5: bridge window [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.250523] pci 0000:00:1e.0: PCI bridge to [bus 05-05]
    [ 0.250565] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff]
    [ 0.250609] pci 0000:00:1e.0: bridge window [mem 0xfbf00000-0xfbffffff]
    [ 0.250653] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 0.250702] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250746] pci 0000:00:01.0: setting latency timer to 64
    [ 0.250750] pci 0000:00:1c.0: enabling device (0106 -> 0107)
    [ 0.250792] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250836] pci 0000:00:1c.0: setting latency timer to 64
    [ 0.250840] pci 0000:00:1c.4: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.250884] pci 0000:00:1c.4: setting latency timer to 64
    [ 0.250890] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 0.250933] pci 0000:00:1c.5: setting latency timer to 64
    [ 0.250938] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.250941] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.250943] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.250944] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.250946] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.250948] pci_bus 0000:00: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.250949] pci_bus 0000:01: resource 0 [io 0xb000-0xbfff]
    [ 0.250951] pci_bus 0000:01: resource 1 [mem 0xfa000000-0xfbcfffff]
    [ 0.250953] pci_bus 0000:01: resource 2 [mem 0xce000000-0xdfffffff 64bit pref]
    [ 0.250955] pci_bus 0000:04: resource 0 [io 0x1000-0x1fff]
    [ 0.250956] pci_bus 0000:04: resource 1 [mem 0x80000000-0x803fffff]
    [ 0.250958] pci_bus 0000:04: resource 2 [mem 0xf8f00000-0xf8ffffff 64bit pref]
    [ 0.250960] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.250961] pci_bus 0000:03: resource 1 [mem 0xfbe00000-0xfbefffff]
    [ 0.250963] pci_bus 0000:03: resource 2 [mem 0x80400000-0x805fffff 64bit pref]
    [ 0.250965] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 0.250966] pci_bus 0000:02: resource 1 [mem 0xfbd00000-0xfbdfffff]
    [ 0.250968] pci_bus 0000:02: resource 2 [mem 0x80600000-0x807fffff 64bit pref]
    [ 0.250970] pci_bus 0000:05: resource 0 [io 0xe000-0xefff]
    [ 0.250972] pci_bus 0000:05: resource 1 [mem 0xfbf00000-0xfbffffff]
    [ 0.250973] pci_bus 0000:05: resource 4 [io 0x0000-0x0cf7]
    [ 0.250975] pci_bus 0000:05: resource 5 [io 0x0d00-0xffff]
    [ 0.250977] pci_bus 0000:05: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.250978] pci_bus 0000:05: resource 7 [mem 0x000d0000-0x000dffff]
    [ 0.250980] pci_bus 0000:05: resource 8 [mem 0x80000000-0xffffffff]
    [ 0.251002] NET: Registered protocol family 2
    [ 0.251085] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    [ 0.251263] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.251592] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.251779] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.251822] TCP reno registered
    [ 0.251861] UDP hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.251907] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
    [ 0.252025] NET: Registered protocol family 1
    [ 0.295104] pci 0000:01:00.0: Boot video device
    [ 0.295141] PCI: CLS 32 bytes, default 64
    [ 0.295174] Unpacking initramfs...
    [ 0.317387] Freeing initrd memory: 1728k freed
    [ 0.318002] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    [ 0.318046] apm: disabled - APM is not SMP safe.
    [ 0.318193] audit: initializing netlink socket (disabled)
    [ 0.318243] type=2000 audit(1303935493.316:1): initialized
    [ 0.318520] highmem bounce pool size: 64 pages
    [ 0.318562] HugeTLB registered 4 MB page size, pre-allocated 0 pages
    [ 0.320047] VFS: Disk quotas dquot_6.5.2
    [ 0.320145] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    [ 0.320261] msgmni has been set to 1709
    [ 0.320435] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 0.320488] io scheduler noop registered
    [ 0.320527] io scheduler deadline registered
    [ 0.320574] io scheduler cfq registered (default)
    [ 0.320710] pcieport 0000:00:01.0: setting latency timer to 64
    [ 0.320734] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 0.320771] pcieport 0000:00:1c.0: setting latency timer to 64
    [ 0.320798] pcieport 0000:00:1c.0: irq 41 for MSI/MSI-X
    [ 0.320848] pcieport 0000:00:1c.4: setting latency timer to 64
    [ 0.320875] pcieport 0000:00:1c.4: irq 42 for MSI/MSI-X
    [ 0.320923] pcieport 0000:00:1c.5: setting latency timer to 64
    [ 0.320950] pcieport 0000:00:1c.5: irq 43 for MSI/MSI-X
    [ 0.321092] intel_idle: MWAIT substates: 0x22220
    [ 0.321094] intel_idle: does not run on family 6 model 23
    [ 0.321105] ERST: Table is not found!
    [ 0.321155] isapnp: Scanning for PnP cards...
    [ 0.676796] isapnp: No Plug & Play device found
    [ 0.676877] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.697390] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.920667] 00:06: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 0.973728] i8042: PNP: No PS/2 controller found. Probing ports directly.
    [ 0.976563] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.976631] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.976752] mousedev: PS/2 mouse device common for all mice
    [ 0.976847] rtc_cmos 00:03: RTC can wake from S4
    [ 1.000070] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
    [ 1.000137] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.000200] cpuidle: using governor ladder
    [ 1.000240] cpuidle: using governor menu
    [ 1.000436] TCP cubic registered
    [ 1.000476] NET: Registered protocol family 17
    [ 1.000521] Registering the dns_resolver key type
    [ 1.000569] Using IPI No-Shortcut mode
    [ 1.000679] PM: Hibernation image not present or could not be loaded.
    [ 1.000682] registered taskstats version 1
    [ 1.001054] rtc_cmos 00:03: setting system clock to 2011-04-27 20:18:14 UTC (1303935494)
    [ 1.001128] Initalizing network drop monitor service
    [ 1.001211] Freeing unused kernel memory: 424k freed
    [ 1.005982] <30>udev[38]: starting version 167
    [ 1.107427] SCSI subsystem initialized
    [ 1.127245] libata version 3.00 loaded.
    [ 1.131006] pata_jmicron 0000:03:00.1: enabling device (0000 -> 0001)
    [ 1.131057] pata_jmicron 0000:03:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.131134] pata_jmicron 0000:03:00.1: setting latency timer to 64
    [ 1.131436] scsi0 : pata_jmicron
    [ 1.131554] scsi1 : pata_jmicron
    [ 1.132024] ata1: PATA max UDMA/100 cmd 0xdc00 ctl 0xd880 bmdma 0xd400 irq 17
    [ 1.132068] ata2: PATA max UDMA/100 cmd 0xd800 ctl 0xd480 bmdma 0xd408 irq 17
    [ 1.142526] ahci 0000:00:1f.2: version 3.0
    [ 1.142536] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 1.142608] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.142644] ahci: SSS flag set, parallel bus scan disabled
    [ 1.142711] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
    [ 1.142765] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part ccc ems sxs
    [ 1.142819] ahci 0000:00:1f.2: setting latency timer to 64
    [ 1.174032] scsi2 : ahci
    [ 1.174136] scsi3 : ahci
    [ 1.174235] scsi4 : ahci
    [ 1.174335] scsi5 : ahci
    [ 1.174434] scsi6 : ahci
    [ 1.174532] scsi7 : ahci
    [ 1.174699] ata3: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff100 irq 44
    [ 1.174752] ata4: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff180 irq 44
    [ 1.174804] ata5: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff200 irq 44
    [ 1.174856] ata6: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff280 irq 44
    [ 1.174908] ata7: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff300 irq 44
    [ 1.174960] ata8: SATA max UDMA/133 abar m2048@0xf9fff000 port 0xf9fff380 irq 44
    [ 1.175036] ahci 0000:03:00.0: PCI INT A -> GSI 16 (level,

    Hi jasonwryan,
    Your thread helps a lot. I saw a lot of posts but not this one.
    This workaround is fine for me to wait the fix.
    Thanks a lot
    Workaround :
    It seems the problem might be linked to transparent items like background.
    As explained in the above thread :
    According to the bug report the nVidia driver is freaking out and creating too many events, which causes an event buffer in Xorg to overflow.  It works OK with the older Xorg, though.
    So the temporary solution is to downgrade 3 packages.
    Install the tool to downgrade
    > yaourt -Sy downgrade
    Downgrade
    Note the item number can change
    > downgrade xf86-input-evdev
    Hit "s" key
    Choose 2 (xf86-input-evdev-2.6.0-2-i686.pkg.tar.xz)
    > downgrade xorg-server
    Hit "s" key
    Choose 1 (xorg-server-1.9.4.901-1-i686.pkg.tar.xz)
    > downgrade xorg-server-common
    Hit "s" key
    Choose 1 (xorg-server-common-1.9.4.901-1-i686.pkg.tar.xz)
    Be carefull : don't update these 3 packages when updating your system (pacman -Syu) since it is not fixed.
    Last edited by shefla (2011-04-27 22:36:37)

  • [solved] mouse and keyboard not working (and previous fix wont work)

    i made a clean default setup with
    arch
    latest kernel - 2.6.29 i think
    xorg 1.6.1
    video-intel-legacy
    on a 865G intel box + tried usb and ps2 keyboards + usb mouse
    when i start X the mouse and keyboard dont work (and i have to hard reset the box) in all of the setups i tried. the AutoAddDevices fix suggested before does not work this time
    - without xorg.conf
    - with auto-generated xorg.conf (X -confogure)
    - with the automatic conf +
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    - with tiny xorg.conf containing only
    Section "ServerFlags"
    Option "AutoAddDevices" "False"
    EndSection
    - with dbus/hal enabled and disabled in rc.conf
    how i make it work
    Last edited by ash (2009-04-30 19:01:41)

    the setup that works to me now is
    automatic xorg.conf with the AutAddDevices False (disable hotplug) lines
    dbus and hal enabled in deamons
    this lines instruct xorg to use xf86-input-mouse/keyboard instead of evdev. ie it looks like with evdev there is no point in xf86-input-mouse/keyboard
    Last edited by ash (2009-04-30 18:26:16)

  • Mouse speed and precision at 1920x1200 are not good in OS X Tiger

    Hi,
    I am using the same logitech MX700 mouse on a intel mac mini in dual boot with OS X and Windows XP.
    The screen resolution is the same on both OSs: 1920x1200
    The mouse is perfectly working while using Windows XP, while it is working badly under OS X.
    I have installed logitech software on both of them but it is working in two different ways. I can try to adjust mouse speed setting but it is not the same: if the mouse goes faster the precision is lower. In windows this does not happen.
    In windows I can set "acceleration" while in OS X this is missing. I don't know if this could be the cause of problem I am feeling in OS X.
    In the past I have noticed similar mouse behaviour while using unix like OSs. So I think it could be related to the mouse driver for these Operating systems and to the high screen resolution.
    Does anybody know if there is a fix about this?
    I would like to start learn using OS X but I still "hate" it due this poor mouse support.
    Thanks a lot!

    The poor mouse support is by Logitech. However, MouseZoom is a popular software for faster mouse speed:
    http://homepage.mac.com/bhines/mousezoom.html

  • [solved] ThinkPad connect with extern Monitor Problem

    Hello community
    I have installed arch on my T420 integrated HD 3000 and i have the Problem that when i start arch and the boot messages comes i can see the deamon starts ok,ok,ok who should be on the right side but on the NEC they was displayed 5 cm inside. Also when iam on the console and i type dmesg all the output scroll down and broke 5 cm from the roof. And when iam on openbox and i will maximize one window it would be maximized on the size from the Laptop LCD.
    I have made an .xinitrc
    #!/bin/sh
    # ~/.xinitrc
    # Executed by startx (run your window manager from here)
    #xrandr --output DP2 --auto --output LVDS --right-of LVDS
    #xrandr --output DP1 --auto --output LVDS --auto --same-as DP1
    xrandr -d DP2 -s 1900x1200
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    # exec gnome-session
    # exec startkde
    # exec startxfce4
    and here is my Xorg.0.log
    [ 81.298]
    X.Org X Server 1.12.4
    Release Date: 2012-08-27
    [ 81.298] X Protocol Version 11, Revision 0
    [ 81.298] Build Operating System: Linux 3.4.8-1-ARCH x86_64
    [ 81.298] Current Operating System: Linux bullitt 3.5.4-1-ARCH #1 SMP PREEMPT Sat Sep 15 08:12:04 CEST 2012 x86_64
    [ 81.298] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=7b8780ba-278c-4d61-a1ec-ba2a6f96c6ba ro quiet
    [ 81.299] Build Date: 27 August 2012 08:04:39AM
    [ 81.299]
    [ 81.299] Current version of pixman: 0.26.2
    [ 81.299] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 81.299] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 81.306] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 7 16:33:34 2012
    [ 81.307] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 81.308] (==) No Layout section. Using the first Screen section.
    [ 81.308] (==) No screen section available. Using defaults.
    [ 81.308] (**) |-->Screen "Default Screen Section" (0)
    [ 81.308] (**) | |-->Monitor "<default monitor>"
    [ 81.308] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 81.308] (==) Automatically adding devices
    [ 81.308] (==) Automatically enabling devices
    [ 81.308] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 81.308] Entry deleted from font path.
    [ 81.308] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 81.308] Entry deleted from font path.
    [ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 81.308] Entry deleted from font path.
    [ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 81.308] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 81.308] Entry deleted from font path.
    [ 81.308] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 81.308] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 81.308] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 81.308] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 81.308] (II) Loader magic: 0x7c8b00
    [ 81.308] (II) Module ABI versions:
    [ 81.308] X.Org ANSI C Emulation: 0.4
    [ 81.308] X.Org Video Driver: 12.1
    [ 81.308] X.Org XInput driver : 16.0
    [ 81.308] X.Org Server Extension : 6.0
    [ 81.308] (--) PCI:*(0:0:2:0) 8086:0126:17aa:21ce rev 9, Mem @ 0xf0000000/4194304, 0xe0000000/268435456, I/O @ 0x00005000/64
    [ 81.308] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 81.308] (II) LoadModule: "extmod"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 81.309] (II) Module extmod: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension MIT-SCREEN-SAVER
    [ 81.309] (II) Loading extension XFree86-VidModeExtension
    [ 81.309] (II) Loading extension XFree86-DGA
    [ 81.309] (II) Loading extension DPMS
    [ 81.309] (II) Loading extension XVideo
    [ 81.309] (II) Loading extension XVideo-MotionCompensation
    [ 81.309] (II) Loading extension X-Resource
    [ 81.309] (II) LoadModule: "dbe"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 81.309] (II) Module dbe: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension DOUBLE-BUFFER
    [ 81.309] (II) LoadModule: "glx"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 81.309] (II) Module glx: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (==) AIGLX enabled
    [ 81.309] (II) Loading extension GLX
    [ 81.309] (II) LoadModule: "record"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 81.309] (II) Module record: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.13.0
    [ 81.309] Module class: X.Org Server Extension
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension RECORD
    [ 81.309] (II) LoadModule: "dri"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 81.309] (II) Module dri: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.0.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension XFree86-DRI
    [ 81.309] (II) LoadModule: "dri2"
    [ 81.309] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 81.309] (II) Module dri2: vendor="X.Org Foundation"
    [ 81.309] compiled for 1.12.4, module version = 1.2.0
    [ 81.309] ABI class: X.Org Server Extension, version 6.0
    [ 81.309] (II) Loading extension DRI2
    [ 81.309] (==) Matched intel as autoconfigured driver 0
    [ 81.309] (==) Matched vesa as autoconfigured driver 1
    [ 81.309] (==) Matched fbdev as autoconfigured driver 2
    [ 81.309] (==) Assigned the driver to the xf86ConfigLayout
    [ 81.309] (II) LoadModule: "intel"
    [ 81.310] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
    [ 81.310] (II) Module intel: vendor="X.Org Foundation"
    [ 81.310] compiled for 1.12.4, module version = 2.20.9
    [ 81.310] Module class: X.Org Video Driver
    [ 81.310] ABI class: X.Org Video Driver, version 12.1
    [ 81.310] (II) LoadModule: "vesa"
    [ 81.310] (WW) Warning, couldn't open module vesa
    [ 81.310] (II) UnloadModule: "vesa"
    [ 81.310] (II) Unloading vesa
    [ 81.310] (EE) Failed to load module "vesa" (module does not exist, 0)
    [ 81.310] (II) LoadModule: "fbdev"
    [ 81.310] (WW) Warning, couldn't open module fbdev
    [ 81.310] (II) UnloadModule: "fbdev"
    [ 81.310] (II) Unloading fbdev
    [ 81.310] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [ 81.310] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
    i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
    E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
    965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
    4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
    Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
    Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
    Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
    Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
    Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server,
    Ivybridge Server (GT2), Haswell Desktop (GT1), Haswell Desktop (GT2),
    Haswell Desktop (GT2+), Haswell Mobile (GT1), Haswell Mobile (GT2),
    Haswell Mobile (GT2+), Haswell Server (GT1), Haswell Server (GT2),
    Haswell Server (GT2+), Haswell SDV Desktop (GT1),
    Haswell SDV Desktop (GT2), Haswell SDV Desktop (GT2+),
    Haswell SDV Mobile (GT1), Haswell SDV Mobile (GT2),
    Haswell SDV Mobile (GT2+), Haswell SDV Server (GT1),
    Haswell SDV Server (GT2), Haswell SDV Server (GT2+),
    Haswell ULT Desktop (GT1), Haswell ULT Desktop (GT2),
    Haswell ULT Desktop (GT2+), Haswell ULT Mobile (GT1),
    Haswell ULT Mobile (GT2), Haswell ULT Mobile (GT2+),
    Haswell ULT Server (GT1), Haswell ULT Server (GT2),
    Haswell ULT Server (GT2+), Haswell CRW Desktop (GT1),
    Haswell CRW Desktop (GT2), Haswell CRW Desktop (GT2+),
    Haswell CRW Mobile (GT1), Haswell CRW Mobile (GT2),
    Haswell CRW Mobile (GT2+), Haswell CRW Server (GT1),
    Haswell CRW Server (GT2), Haswell CRW Server (GT2+),
    ValleyView PO board
    [ 81.310] (--) using VT number 7
    [ 81.313] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 8, (OK)
    [ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 8, (OK)
    [ 81.314] drmOpenByBusid: drmOpenMinor returns 8
    [ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 9, (OK)
    [ 81.314] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
    [ 81.314] drmOpenDevice: node name is /dev/dri/card0
    [ 81.314] drmOpenDevice: open result is 9, (OK)
    [ 81.314] drmOpenByBusid: drmOpenMinor returns 9
    [ 81.314] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
    [ 81.314] (II) intel(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 81.314] (==) intel(0): Depth 24, (--) framebuffer bpp 32
    [ 81.314] (==) intel(0): RGB weight 888
    [ 81.314] (==) intel(0): Default visual is TrueColor
    [ 81.314] (--) intel(0): Integrated Graphics Chipset: Intel(R) Sandybridge Mobile (GT2+)
    [ 81.314] (**) intel(0): Relaxed fencing enabled
    [ 81.314] (**) intel(0): Wait on SwapBuffers? enabled
    [ 81.314] (**) intel(0): Triple buffering? enabled
    [ 81.314] (**) intel(0): Framebuffer tiled
    [ 81.315] (**) intel(0): Pixmaps tiled
    [ 81.315] (**) intel(0): 3D buffers tiled
    [ 81.315] (**) intel(0): SwapBuffers wait enabled
    [ 81.315] (==) intel(0): video overlay key set to 0x101fe
    [ 81.315] (II) intel(0): Output LVDS1 has no monitor section
    [ 81.315] (--) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
    [ 81.315] (II) intel(0): Output VGA1 has no monitor section
    [ 81.340] (II) intel(0): Output HDMI1 has no monitor section
    [ 81.380] (II) intel(0): Output DP1 has no monitor section
    [ 81.393] (II) intel(0): Output HDMI2 has no monitor section
    [ 81.406] (II) intel(0): Output HDMI3 has no monitor section
    [ 81.464] (II) intel(0): Output DP2 has no monitor section
    [ 81.506] (II) intel(0): Output DP3 has no monitor section
    [ 81.507] (II) intel(0): EDID for output LVDS1
    [ 81.507] (II) intel(0): Manufacturer: AUO Model: 213e Serial#: 0
    [ 81.507] (II) intel(0): Year: 2010 Week: 33
    [ 81.507] (II) intel(0): EDID Version: 1.4
    [ 81.507] (II) intel(0): Digital Display Input
    [ 81.507] (II) intel(0): 6 bits per channel
    [ 81.507] (II) intel(0): Digital interface is undefined
    [ 81.507] (II) intel(0): Max Image Size [cm]: horiz.: 31 vert.: 17
    [ 81.507] (II) intel(0): Gamma: 2.20
    [ 81.507] (II) intel(0): No DPMS capabilities specified
    [ 81.507] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 81.507] (II) intel(0): First detailed timing is preferred mode
    [ 81.507] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 81.507] (II) intel(0): redX: 0.610 redY: 0.350 greenX: 0.320 greenY: 0.560
    [ 81.507] (II) intel(0): blueX: 0.150 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
    [ 81.507] (II) intel(0): Manufacturer's mask: 0
    [ 81.507] (II) intel(0): Supported detailed timing:
    [ 81.507] (II) intel(0): clock: 110.0 MHz Image Size: 309 x 174 mm
    [ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
    [ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
    [ 81.507] (II) intel(0): Supported detailed timing:
    [ 81.507] (II) intel(0): clock: 73.3 MHz Image Size: 309 x 174 mm
    [ 81.507] (II) intel(0): h_active: 1600 h_sync: 1664 h_sync_end 1706 h_blank_end 2010 h_border: 0
    [ 81.507] (II) intel(0): v_active: 900 v_sync: 903 v_sync_end 906 v_blanking: 912 v_border: 0
    [ 81.507] (II) intel(0): AUO
    [ 81.507] (II) intel(0): B140RW02 V1
    [ 81.507] (II) intel(0): EDID (in hex):
    [ 81.507] (II) intel(0): 00ffffffffffff0006af3e2100000000
    [ 81.507] (II) intel(0): 21140104901f11780261959c59528f26
    [ 81.507] (II) intel(0): 21505400000001010101010101010101
    [ 81.507] (II) intel(0): 010101010101f82a409a61840c30402a
    [ 81.507] (II) intel(0): 330035ae10000018a51c409a61840c30
    [ 81.507] (II) intel(0): 402a330035ae10000018000000fe0041
    [ 81.507] (II) intel(0): 554f0a202020202020202020000000fe
    [ 81.507] (II) intel(0): 004231343052573032205631200a00d0
    [ 81.507] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 81.507] (II) intel(0): Printing DDC gathered Modelines:
    [ 81.508] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 81.508] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 81.508] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
    [ 81.508] (II) intel(0): Printing probed modes for output LVDS1
    [ 81.508] (II) intel(0): Modeline "1600x900"x60.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 81.508] (II) intel(0): Modeline "1600x900"x40.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 81.508] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz d)
    [ 81.508] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz d)
    [ 81.508] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz d)
    [ 81.508] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz d)
    [ 81.508] (II) intel(0): EDID for output VGA1
    [ 81.533] (II) intel(0): EDID for output HDMI1
    [ 81.573] (II) intel(0): EDID for output DP1
    [ 81.586] (II) intel(0): EDID for output HDMI2
    [ 81.600] (II) intel(0): EDID for output HDMI3
    [ 81.657] (II) intel(0): EDID for output DP2
    [ 81.657] (II) intel(0): Manufacturer: NEC Model: 67d1 Serial#: 0
    [ 81.657] (II) intel(0): Year: 2011 Week: 33
    [ 81.657] (II) intel(0): EDID Version: 1.4
    [ 81.657] (II) intel(0): Digital Display Input
    [ 81.657] (II) intel(0): 10 bits per channel
    [ 81.657] (II) intel(0): Digital interface is DisplayPort
    [ 81.657] (II) intel(0): Max Image Size [cm]: horiz.: 52 vert.: 32
    [ 81.657] (II) intel(0): Gamma: 2.20
    [ 81.657] (II) intel(0): DPMS capabilities: StandBy Suspend Off
    [ 81.657] (II) intel(0): Supported color encodings: RGB 4:4:4
    [ 81.657] (II) intel(0): First detailed timing is preferred mode
    [ 81.657] (II) intel(0): Preferred mode is native pixel format and refresh rate
    [ 81.657] (II) intel(0): redX: 0.679 redY: 0.310 greenX: 0.210 greenY: 0.686
    [ 81.657] (II) intel(0): blueX: 0.149 blueY: 0.047 whiteX: 0.313 whiteY: 0.329
    [ 81.657] (II) intel(0): Supported established timings:
    [ 81.657] (II) intel(0): 720x400@70Hz
    [ 81.657] (II) intel(0): 640x480@60Hz
    [ 81.657] (II) intel(0): 640x480@67Hz
    [ 81.657] (II) intel(0): 640x480@72Hz
    [ 81.657] (II) intel(0): 640x480@75Hz
    [ 81.657] (II) intel(0): 800x600@56Hz
    [ 81.657] (II) intel(0): 800x600@60Hz
    [ 81.657] (II) intel(0): 800x600@72Hz
    [ 81.657] (II) intel(0): 800x600@75Hz
    [ 81.657] (II) intel(0): 832x624@75Hz
    [ 81.657] (II) intel(0): 1024x768@60Hz
    [ 81.657] (II) intel(0): 1024x768@70Hz
    [ 81.657] (II) intel(0): 1024x768@75Hz
    [ 81.657] (II) intel(0): 1280x1024@75Hz
    [ 81.657] (II) intel(0): 1152x864@75Hz
    [ 81.657] (II) intel(0): Manufacturer's mask: 0
    [ 81.657] (II) intel(0): Supported standard timings:
    [ 81.657] (II) intel(0): #0: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 81.657] (II) intel(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 81.657] (II) intel(0): #2: hsize: 1400 vsize 1050 refresh: 60 vid: 16528
    [ 81.657] (II) intel(0): #3: hsize: 1360 vsize 765 refresh: 60 vid: 49291
    [ 81.657] (II) intel(0): #4: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 81.657] (II) intel(0): #5: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 81.657] (II) intel(0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 81.657] (II) intel(0): #7: hsize: 1920 vsize 1200 refresh: 60 vid: 209
    [ 81.657] (II) intel(0): Supported detailed timing:
    [ 81.657] (II) intel(0): clock: 154.0 MHz Image Size: 518 x 324 mm
    [ 81.657] (II) intel(0): h_active: 1920 h_sync: 1968 h_sync_end 2000 h_blank_end 2080 h_border: 0
    [ 81.657] (II) intel(0): v_active: 1200 v_sync: 1203 v_sync_end 1209 v_blanking: 1235 v_border: 0
    [ 81.657] (II) intel(0): Ranges: V min: 50 V max: 85 Hz, H min: 31 H max: 92 kHz, PixClock max 165 MHz
    [ 81.657] (II) intel(0): Monitor name: PA241W
    [ 81.657] (II) intel(0): Serial No: 18107120UB
    [ 81.657] (II) intel(0): EDID (in hex):
    [ 81.657] (II) intel(0): 00ffffffffffff0038a3d16700000000
    [ 81.657] (II) intel(0): 21150104b5342078e2de45ad4f35af26
    [ 81.657] (II) intel(0): 0c5054bfef8081c0818090408bc09500
    [ 81.657] (II) intel(0): a940b300d100283c80a070b023403020
    [ 81.657] (II) intel(0): 360006442100001a000000fd0032551f
    [ 81.657] (II) intel(0): 5c10000a202020202020000000fc0050
    [ 81.657] (II) intel(0): 41323431570a202020202020000000ff
    [ 81.657] (II) intel(0): 00313831303731323055420a2020004b
    [ 81.657] (II) intel(0): Printing probed modes for output DP2
    [ 81.657] (II) intel(0): Modeline "1920x1200"x60.0 154.00 1920 1968 2000 2080 1200 1203 1209 1235 +hsync -vsync (74.0 kHz eP)
    [ 81.657] (II) intel(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1680x945"x60.0 131.48 1680 1784 1960 2240 945 946 949 978 -hsync +vsync (58.7 kHz)
    [ 81.657] (II) intel(0): Modeline "1400x1050"x74.9 156.00 1400 1504 1648 1896 1050 1053 1057 1099 -hsync +vsync (82.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x84.8 157.00 1440 1544 1696 1952 900 903 909 948 -hsync +vsync (80.4 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x75.0 136.75 1440 1536 1688 1936 900 903 909 942 -hsync +vsync (70.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
    [ 81.657] (II) intel(0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 81.657] (II) intel(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x84.9 122.50 1280 1360 1496 1712 800 803 809 843 -hsync +vsync (71.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x74.9 106.50 1280 1360 1488 1696 800 803 809 838 -hsync +vsync (62.8 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
    [ 81.657] (II) intel(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x84.8 117.50 1280 1360 1496 1712 768 771 778 809 -hsync +vsync (68.6 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x74.9 102.25 1280 1360 1488 1696 768 771 778 805 +hsync -vsync (60.3 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
    [ 81.657] (II) intel(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 81.658] (II) intel(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 81.658] (II) intel(0): Modeline "1024x576"x60.0 46.97 1024 1064 1168 1312 576 577 580 597 -hsync +vsync (35.8 kHz)
    [ 81.658] (II) intel(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x85.1 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 81.658] (II) intel(0): Modeline "848x480"x60.0 33.75 848 864 976 1088 480 486 494 517 +hsync +vsync (31.0 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "720x400"x85.0 35.50 720 756 828 936 400 401 404 446 -hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x400"x85.1 31.50 640 672 736 832 400 401 404 445 -hsync +vsync (37.9 kHz e)
    [ 81.658] (II) intel(0): Modeline "640x350"x85.1 31.50 640 672 736 832 350 382 385 445 +hsync -vsync (37.9 kHz e)
    [ 81.700] (II) intel(0): EDID for output DP3
    [ 81.700] (II) intel(0): Output LVDS1 connected
    [ 81.700] (II) intel(0): Output VGA1 disconnected
    [ 81.700] (II) intel(0): Output HDMI1 disconnected
    [ 81.700] (II) intel(0): Output DP1 disconnected
    [ 81.700] (II) intel(0): Output HDMI2 disconnected
    [ 81.700] (II) intel(0): Output HDMI3 disconnected
    [ 81.700] (II) intel(0): Output DP2 connected
    [ 81.700] (II) intel(0): Output DP3 disconnected
    [ 81.700] (II) intel(0): Using exact sizes for initial modes
    [ 81.700] (II) intel(0): Output LVDS1 using initial mode 1600x900
    [ 81.700] (II) intel(0): Output DP2 using initial mode 1600x900
    [ 81.700] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 81.700] (II) intel(0): Kernel page flipping support detected, enabling
    [ 81.700] (**) intel(0): Display dimensions: (310, 170) mm
    [ 81.700] (**) intel(0): DPI set to (131, 134)
    [ 81.700] (II) Loading sub module "fb"
    [ 81.700] (II) LoadModule: "fb"
    [ 81.701] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 81.701] (II) Module fb: vendor="X.Org Foundation"
    [ 81.701] compiled for 1.12.4, module version = 1.0.0
    [ 81.701] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 81.701] (II) Loading sub module "dri2"
    [ 81.701] (II) LoadModule: "dri2"
    [ 81.701] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 81.701] (II) Module dri2: vendor="X.Org Foundation"
    [ 81.701] compiled for 1.12.4, module version = 1.2.0
    [ 81.701] ABI class: X.Org Server Extension, version 6.0
    [ 81.701] (==) Depth 24 pixmap format is 32 bpp
    [ 81.702] (II) intel(0): [DRI2] Setup complete
    [ 81.702] (II) intel(0): [DRI2] DRI driver: i965
    [ 81.702] (II) intel(0): Allocated new frame buffer 1600x900 stride 6656, tiled
    [ 81.704] (II) UXA(0): Driver registered support for the following operations:
    [ 81.704] (II) solid
    [ 81.704] (II) copy
    [ 81.704] (II) composite (RENDER acceleration)
    [ 81.704] (II) put_image
    [ 81.704] (II) get_image
    [ 81.704] (==) intel(0): Backing store disabled
    [ 81.704] (==) intel(0): Silken mouse enabled
    [ 81.704] (II) intel(0): Initializing HW Cursor
    [ 81.704] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 81.707] (==) intel(0): DPMS enabled
    [ 81.707] (==) intel(0): Intel XvMC decoder enabled
    [ 81.707] (II) intel(0): Set up textured video
    [ 81.707] (II) intel(0): [XvMC] xvmc_vld driver initialized.
    [ 81.707] (II) intel(0): direct rendering: DRI2 Enabled
    [ 81.707] (==) intel(0): hotplug detection: "enabled"
    [ 82.106] (--) RandR disabled
    [ 82.107] (II) Initializing built-in extension Generic Event Extension
    [ 82.107] (II) Initializing built-in extension SHAPE
    [ 82.107] (II) Initializing built-in extension MIT-SHM
    [ 82.107] (II) Initializing built-in extension XInputExtension
    [ 82.107] (II) Initializing built-in extension XTEST
    [ 82.107] (II) Initializing built-in extension BIG-REQUESTS
    [ 82.107] (II) Initializing built-in extension SYNC
    [ 82.107] (II) Initializing built-in extension XKEYBOARD
    [ 82.107] (II) Initializing built-in extension XC-MISC
    [ 82.107] (II) Initializing built-in extension SECURITY
    [ 82.107] (II) Initializing built-in extension XINERAMA
    [ 82.107] (II) Initializing built-in extension XFIXES
    [ 82.107] (II) Initializing built-in extension RENDER
    [ 82.107] (II) Initializing built-in extension RANDR
    [ 82.107] (II) Initializing built-in extension COMPOSITE
    [ 82.107] (II) Initializing built-in extension DAMAGE
    [ 82.119] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 82.119] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 82.119] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 82.119] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 82.119] (II) AIGLX: Loaded and initialized i965
    [ 82.119] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 82.119] (II) intel(0): Setting screen physical size to 423 x 238
    [ 82.158] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 82.158] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 82.158] (II) LoadModule: "evdev"
    [ 82.159] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 82.159] (II) Module evdev: vendor="X.Org Foundation"
    [ 82.159] compiled for 1.12.3.901, module version = 2.7.3
    [ 82.159] Module class: X.Org XInput Driver
    [ 82.159] ABI class: X.Org XInput driver, version 16.0
    [ 82.159] (II) Using input driver 'evdev' for 'Power Button'
    [ 82.159] (**) Power Button: always reports core events
    [ 82.159] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 82.159] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 82.159] (--) evdev: Power Button: Found keys
    [ 82.159] (II) evdev: Power Button: Configuring as keyboard
    [ 82.159] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 82.160] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 82.160] (**) Option "xkb_rules" "evdev"
    [ 82.160] (**) Option "xkb_model" "evdev"
    [ 82.160] (**) Option "xkb_layout" "de"
    [ 82.160] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.193] (II) config/udev: Adding input device Video Bus (/dev/input/event12)
    [ 82.193] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 82.193] (II) Using input driver 'evdev' for 'Video Bus'
    [ 82.193] (**) Video Bus: always reports core events
    [ 82.193] (**) evdev: Video Bus: Device: "/dev/input/event12"
    [ 82.193] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 82.193] (--) evdev: Video Bus: Found keys
    [ 82.193] (II) evdev: Video Bus: Configuring as keyboard
    [ 82.193] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input12/event12"
    [ 82.193] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 82.193] (**) Option "xkb_rules" "evdev"
    [ 82.193] (**) Option "xkb_model" "evdev"
    [ 82.193] (**) Option "xkb_layout" "de"
    [ 82.193] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.195] (II) config/udev: Adding input device Lid Switch (/dev/input/event2)
    [ 82.195] (II) No input driver specified, ignoring this device.
    [ 82.195] (II) This device may have been added with another device file.
    [ 82.195] (II) config/udev: Adding input device Sleep Button (/dev/input/event3)
    [ 82.195] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 82.195] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 82.195] (**) Sleep Button: always reports core events
    [ 82.195] (**) evdev: Sleep Button: Device: "/dev/input/event3"
    [ 82.195] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 82.195] (--) evdev: Sleep Button: Found keys
    [ 82.195] (II) evdev: Sleep Button: Configuring as keyboard
    [ 82.195] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3/event3"
    [ 82.195] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 8)
    [ 82.195] (**) Option "xkb_rules" "evdev"
    [ 82.196] (**) Option "xkb_model" "evdev"
    [ 82.196] (**) Option "xkb_layout" "de"
    [ 82.196] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/event1)
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: Applying InputClass "evdev pointer catchall"
    [ 82.197] (II) Using input driver 'evdev' for 'Logitech USB-PS/2 Optical Mouse'
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: always reports core events
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: Device: "/dev/input/event1"
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Vendor 0x46d Product 0xc01e
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found 12 mouse buttons
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found scroll wheel(s)
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found relative axes
    [ 82.197] (--) evdev: Logitech USB-PS/2 Optical Mouse: Found x and y relative axes
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Configuring as mouse
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: Adding scrollwheel support
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: YAxisMapping: buttons 4 and 5
    [ 82.197] (**) evdev: Logitech USB-PS/2 Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 82.197] (II) XINPUT: Adding extended input device "Logitech USB-PS/2 Optical Mouse" (type: MOUSE, id 9)
    [ 82.197] (II) evdev: Logitech USB-PS/2 Optical Mouse: initialized for relative axes.
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) keeping acceleration scheme 1
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration profile 0
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration factor: 2.000
    [ 82.197] (**) Logitech USB-PS/2 Optical Mouse: (accel) acceleration threshold: 4
    [ 82.197] (II) config/udev: Adding input device Logitech USB-PS/2 Optical Mouse (/dev/input/mouse0)
    [ 82.197] (II) No input driver specified, ignoring this device.
    [ 82.197] (II) This device may have been added with another device file.
    [ 82.197] (II) config/udev: Adding input device Integrated Camera (/dev/input/event10)
    [ 82.197] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
    [ 82.197] (II) Using input driver 'evdev' for 'Integrated Camera'
    [ 82.197] (**) Integrated Camera: always reports core events
    [ 82.197] (**) evdev: Integrated Camera: Device: "/dev/input/event10"
    [ 82.197] (--) evdev: Integrated Camera: Vendor 0x4f2 Product 0xb221
    [ 82.197] (--) evdev: Integrated Camera: Found keys
    [ 82.197] (II) evdev: Integrated Camera: Configuring as keyboard
    [ 82.197] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input10/event10"
    [ 82.197] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD, id 10)
    [ 82.197] (**) Option "xkb_rules" "evdev"
    [ 82.197] (**) Option "xkb_model" "evdev"
    [ 82.197] (**) Option "xkb_layout" "de"
    [ 82.197] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.198] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event13)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=8 (/dev/input/event14)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=7 (/dev/input/event15)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH HDMI/DP,pcm=3 (/dev/input/event16)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Mic (/dev/input/event17)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Mic (/dev/input/event18)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Dock Headphone (/dev/input/event19)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.198] (II) config/udev: Adding input device HDA Intel PCH Headphone (/dev/input/event20)
    [ 82.198] (II) No input driver specified, ignoring this device.
    [ 82.198] (II) This device may have been added with another device file.
    [ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event5)
    [ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
    [ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.199] (**) HID 046a:0101: always reports core events
    [ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event5"
    [ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.199] (--) evdev: HID 046a:0101: Found keys
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
    [ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input5/event5"
    [ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 11)
    [ 82.199] (**) Option "xkb_rules" "evdev"
    [ 82.199] (**) Option "xkb_model" "evdev"
    [ 82.199] (**) Option "xkb_layout" "de"
    [ 82.199] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.199] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event7)
    [ 82.199] (**) HID 046a:0101: Applying InputClass "evdev keyboard catchall"
    [ 82.199] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.199] (**) HID 046a:0101: always reports core events
    [ 82.199] (**) evdev: HID 046a:0101: Device: "/dev/input/event7"
    [ 82.199] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.199] (--) evdev: HID 046a:0101: Found 1 mouse buttons
    [ 82.199] (--) evdev: HID 046a:0101: Found scroll wheel(s)
    [ 82.199] (--) evdev: HID 046a:0101: Found relative axes
    [ 82.199] (II) evdev: HID 046a:0101: Forcing relative x/y axes to exist.
    [ 82.199] (--) evdev: HID 046a:0101: Found absolute axes
    [ 82.199] (II) evdev: HID 046a:0101: Forcing absolute x/y axes to exist.
    [ 82.199] (--) evdev: HID 046a:0101: Found keys
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as mouse
    [ 82.199] (II) evdev: HID 046a:0101: Configuring as keyboard
    [ 82.199] (II) evdev: HID 046a:0101: Adding scrollwheel support
    [ 82.199] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
    [ 82.199] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.199] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.1/input/input7/event7"
    [ 82.199] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: KEYBOARD, id 12)
    [ 82.199] (**) Option "xkb_rules" "evdev"
    [ 82.199] (**) Option "xkb_model" "evdev"
    [ 82.199] (**) Option "xkb_layout" "de"
    [ 82.199] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.199] (II) evdev: HID 046a:0101: initialized for relative axes.
    [ 82.199] (WW) evdev: HID 046a:0101: ignoring absolute axes.
    [ 82.199] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
    [ 82.199] (**) HID 046a:0101: (accel) acceleration profile 0
    [ 82.199] (**) HID 046a:0101: (accel) acceleration factor: 2.000
    [ 82.199] (**) HID 046a:0101: (accel) acceleration threshold: 4
    [ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/event8)
    [ 82.200] (**) HID 046a:0101: Applying InputClass "evdev pointer catchall"
    [ 82.200] (II) Using input driver 'evdev' for 'HID 046a:0101'
    [ 82.200] (**) HID 046a:0101: always reports core events
    [ 82.200] (**) evdev: HID 046a:0101: Device: "/dev/input/event8"
    [ 82.200] (--) evdev: HID 046a:0101: Vendor 0x46a Product 0x101
    [ 82.200] (--) evdev: HID 046a:0101: Found 9 mouse buttons
    [ 82.200] (--) evdev: HID 046a:0101: Found scroll wheel(s)
    [ 82.200] (--) evdev: HID 046a:0101: Found relative axes
    [ 82.200] (--) evdev: HID 046a:0101: Found x and y relative axes
    [ 82.200] (II) evdev: HID 046a:0101: Configuring as mouse
    [ 82.200] (II) evdev: HID 046a:0101: Adding scrollwheel support
    [ 82.200] (**) evdev: HID 046a:0101: YAxisMapping: buttons 4 and 5
    [ 82.200] (**) evdev: HID 046a:0101: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.200] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.2/input/input8/event8"
    [ 82.200] (II) XINPUT: Adding extended input device "HID 046a:0101" (type: MOUSE, id 13)
    [ 82.200] (II) evdev: HID 046a:0101: initialized for relative axes.
    [ 82.200] (**) HID 046a:0101: (accel) keeping acceleration scheme 1
    [ 82.200] (**) HID 046a:0101: (accel) acceleration profile 0
    [ 82.200] (**) HID 046a:0101: (accel) acceleration factor: 2.000
    [ 82.200] (**) HID 046a:0101: (accel) acceleration threshold: 4
    [ 82.200] (II) config/udev: Adding input device HID 046a:0101 (/dev/input/mouse1)
    [ 82.200] (II) No input driver specified, ignoring this device.
    [ 82.200] (II) This device may have been added with another device file.
    [ 82.200] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 82.200] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 82.200] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 82.200] (**) AT Translated Set 2 keyboard: always reports core events
    [ 82.200] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 82.200] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 82.200] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 82.200] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 82.200] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 82.200] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 14)
    [ 82.200] (**) Option "xkb_rules" "evdev"
    [ 82.200] (**) Option "xkb_model" "evdev"
    [ 82.200] (**) Option "xkb_layout" "de"
    [ 82.200] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.201] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event11)
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 82.201] (II) LoadModule: "synaptics"
    [ 82.201] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 82.201] (II) Module synaptics: vendor="X.Org Foundation"
    [ 82.201] compiled for 1.12.2, module version = 1.6.2
    [ 82.201] Module class: X.Org XInput Driver
    [ 82.201] ABI class: X.Org XInput driver, version 16.0
    [ 82.201] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 82.201] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 82.201] (**) Option "Device" "/dev/input/event11"
    [ 82.203] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4820
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 82.203] (**) Option "TapButton1" "1"
    [ 82.203] (**) Option "TapButton2" "2"
    [ 82.203] (**) Option "TapButton3" "3"
    [ 82.203] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 82.203] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input11/event11"
    [ 82.204] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 15)
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 82.204] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 82.204] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 82.204] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 82.204] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse2)
    [ 82.204] (II) No input driver specified, ignoring this device.
    [ 82.204] (II) This device may have been added with another device file.
    [ 82.204] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event21)
    [ 82.204] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
    [ 82.204] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
    [ 82.204] (**) TPPS/2 IBM TrackPoint: always reports core events
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: Device: "/dev/input/event21"
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Vendor 0x2 Product 0xa
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found 3 mouse buttons
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found relative axes
    [ 82.204] (--) evdev: TPPS/2 IBM TrackPoint: Found x and y relative axes
    [ 82.204] (II) evdev: TPPS/2 IBM TrackPoint: Configuring as mouse
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
    [ 82.204] (**) evdev: TPPS/2 IBM TrackPoint: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 82.204] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input21/event21"
    [ 82.204] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE, id 16)
    [ 82.205] (II) evdev: TPPS/2 IBM TrackPoint: initialized for relative axes.
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
    [ 82.205] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
    [ 82.205] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse3)
    [ 82.205] (II) No input driver specified, ignoring this device.
    [ 82.205] (II) This device may have been added with another device file.
    [ 82.205] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
    [ 82.205] (II) No input driver specified, ignoring this device.
    [ 82.205] (II) This device may have been added with another device file.
    [ 82.205] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event9)
    [ 82.205] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
    [ 82.205] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
    [ 82.205] (**) ThinkPad Extra Buttons: always reports core events
    [ 82.205] (**) evdev: ThinkPad Extra Buttons: Device: "/dev/input/event9"
    [ 82.205] (--) evdev: ThinkPad Extra Buttons: Vendor 0x17aa Product 0x5054
    [ 82.205] (--) evdev: ThinkPad Extra Buttons: Found keys
    [ 82.205] (II) evdev: ThinkPad Extra Buttons: Configuring as keyboard
    [ 82.205] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input9/event9"
    [ 82.205] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD, id 17)
    [ 82.205] (**) Option "xkb_rules" "evdev"
    [ 82.205] (**) Option "xkb_model" "evdev"
    [ 82.205] (**) Option "xkb_layout" "de"
    [ 82.205] (**) Option "xkb_variant" "nodeadkeys"
    [ 82.222] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 82.222] (II) intel(0): Printing DDC gathered Modelines:
    [ 82.222] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 82.222] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 82.415] (II) intel(0): Allocated new frame buffer 1920x1200 stride 7680, tiled
    [ 106.807] (II) AIGLX: Suspending AIGLX clients for VT switch
    [ 117.740] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 117.740] (II) AIGLX: Resuming AIGLX clients after VT switch
    [ 117.767] (II) intel(0): EDID vendor "AUO", prod id 8510
    [ 117.767] (II) intel(0): Printing DDC gathered Modelines:
    [ 117.767] (II) intel(0): Modeline "1600x900"x0.0 110.00 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (54.7 kHz eP)
    [ 117.767] (II) intel(0): Modeline "1600x900"x0.0 73.33 1600 1664 1706 2010 900 903 906 912 -hsync -vsync (36.5 kHz e)
    [ 117.959] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    I have connect my ThinkPad per Dockingstation Displayport (I try also DVI) with an NEC PA241W. It seems arch takes the 1600x900 resolution from the Laptop :-(
    I dont know what to do makes the Kernel the Problem?
    On my second PC i have there an Nvidia when i start arch for install all are perfect on my NEC i connected it with DVI
    here is my xrandr
    [frank@bullitt ~]$ xrandr
    Screen 0: minimum 320 x 200, current 1920 x 1200, maximum 8192 x 8192
    LVDS1 connected 1600x900+0+0 (normal left inverted right x axis y axis) 309mm x 174mm
    1600x900 60.0*+ 40.0
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    VGA1 disconnected (normal left inverted right x axis y axis)
    HDMI1 disconnected (normal left inverted right x axis y axis)
    DP1 disconnected (normal left inverted right x axis y axis)
    HDMI2 disconnected (normal left inverted right x axis y axis)
    HDMI3 disconnected (normal left inverted right x axis y axis)
    DP2 connected 1920x1200+0+0 (normal left inverted right x axis y axis) 518mm x 324mm
    1920x1200 60.0*+
    1600x1200 60.0
    1680x1050 60.0
    1680x945 60.0
    1400x1050 74.9 60.0
    1600x900 60.0
    1280x1024 85.0 75.0 60.0
    1440x900 84.8 75.0 59.9
    1280x960 85.0 60.0
    1360x768 59.8 60.0
    1280x800 84.9 74.9 59.8
    1152x864 75.0
    1280x768 84.8 74.9 59.9
    1280x720 60.0
    1024x768 85.0 75.1 70.1 60.0
    1024x576 60.0
    832x624 74.6
    800x600 85.1 72.2 75.0 60.3 56.2
    848x480 60.0
    640x480 85.0 72.8 75.0 66.7 60.0
    720x400 85.0 70.1
    640x400 85.1
    640x350 85.1
    DP3 disconnected (normal left inverted right x axis y axis)
    Does anybody have the same kind of connected an Laptop with an external Monitor and knows what was the Problem?
    I like arch very much but so it doesnt make fun :-(
    I hope someone can help me
    the picture shows openbox with the Thunar maximized
    Last edited by kerasi (2012-10-12 23:12:12)

    @trilby
    i use my Laptop at home 95% and at work 5%
    so my first choice would be to have the perfect resolution on my NEC external and when i opened a window it would display there and i dont have to open my Laptop to move the screen to see it on my external or is it so that you must have opened the laptop display to move the windows?
    And when i would take it at work it would be perfect if i see it on the laptop with his resolution 1600x900
    i hope i explained it well.
    @anoknusa
    i change your config to this
    xrandr --output LVDS1 --mode 1600x900 --pos 0x900 --rotate normal --output DP2 --mode 1920x1200 --pos 0x0 --rotate normal
    when i start firefox it was displayes well on my external but when i opened xterm or thunar pcman i have to open my laptop and move from it up to the external do i make a mistake?
    anoknusa wrote:I stuck that in a script to run when I start X; if the external monitor isn't plugged in, only the laptop display is used.  This sets each screen to act as a seperate display; I can still drag windows between them if I wish, as well as assign windows to open on one screen or the other through DWM's configuration file.  As mentioned earlier, this is also the only way (I think) to get each screen to display at its native resolution.  Note that I specify the resolution for both my T520 LCD and my external monitor, and specify their positions (my external is mounted to the wall above my desk, directly above my laptop); change those as necessary.
    what has xrandr to look like for my external monitor and laptop?
    and what would the script look like for me?
    external 1920x1200
    T420 1600x900
    and thank you for your patience and have a nice day
    ps: i know iam very close to find a solution for my problem
    Last edited by kerasi (2012-10-11 00:05:55)

  • RTL 8188CE poor speed with fluctuations on Wind box DC111

    Hi everyone,
    I have a problem with speed with my WIFI adapter ( RTL 8188CE in AzureWare AW-NE139H ). I think that the problems may be in the drivers.
    The "Local Area Connection Status" report speed between 90 and 120 Mbps but when I start copy files from another pc connected to router via LAN the transfer speed is less than 300Kb. When I place the router to 1 meter from my Wind Box the transfer speed is less than 4Mbps and have a lot of fluctuations. My router is TP-Link WR843ND and I haven't any problems with it when I use my laptop or mobile devices. I try the drivers from MSi site, from Realtek's site and from azure ware. I use Windows 7 64bit. When I test it on Windows 8.1 64bit the problem was worst - the speed was less than 100Kb.
    Does someone have any idea how to solve the problem. I Googled a lot but without luck.
    My system is: Wind Box DC111( RTL 8188CE in AzureWare AW-NE139H ), Windows 7 64 bit, router TP-Link WR843ND

    You can try the Realtek driver if you think it's driver related: http://www.realtek.com.tw/downloads/downloadsView.aspx?Langid=1&PNid=21&PFid=48&Level=5&Conn=4&DownTypeID=3&GetDown=false&Downloads=true
    Hope it helps.

  • Does anyone get the mouse lag with an external display connected via the display port?

    does anyone get the mouse lag with an external display connected via the display port?

    You don't describe the problem in great detail.  Is this the issue you are describing?
    https://discussions.apple.com/thread/4398076?start=0&tstart=0
    If so, then, "Yes."  I have the same problem.  Note that this isn't a tracking speed problem for me, it's a lag between my hand moving and the pointer moving on the external display.
    Andrew

  • Wayland (+Gnome 3.14) mouse speed/acceleration

    Good evening dear archlinux community!
    Just recently I updated to gnome 3.14 and started using it with wayland. So far it runs pretty smooth and stable, which is nice, but I got issues with mouse speed and/or acceleration.
    I'm using a pretty old Razer Deathadder (the 1800dpi version) and razercfg (more precisely razerd) to set its dpi to 900.
    Back in gnome 3.12 it worked just perfect if I set the mouse speed to the middle and disabled acceration. It felt like the "raw input"-like speed from windows.
    But now razercfg doesn't seem to work with wayland, which is understandable, but f*cks up my muscle-memory.
    (By the way: having razerd enabled while running gnome on wayland makes wayland crash at the moment razerd tries to switch dpi. So the mouse runs at 1800 dpi)
    tl;dr
    So my question is: is there any way to force a kind of "raw input" on my mouse speed on gnome+wayland? Like disabling or bypassing the gnome mouse settings or reducing mouse dpi in wayland?
    Setting the mouse speed to the lowest doesn't do the trick. It still feels too fast or accelerated.
    Have a nice weekend
    /edit
    If it isn't possible I'm open for suggestions for a new mouse. Requisites are: perfect Linux support, manual dpi-switching, good ergonomy for quite large hands, 4+ Buttons, 80€ max. And please no Logitech mice...
    Last edited by raunz (2014-10-17 21:27:32)

    Finally, I am running gnome 3.14 with waland on my btrfs-ssd-pimped laptop. Quite cute.
    The major issue is the touchpad's speed. It is so nervous. Acceleration is ... massive. Sensitivity of clicks is nearly unusable. It seems as thinking"will click soon" already is a click. I tried to tweak the touchpad settings in gnome-settings, but tumbled into the dialog and accidentally turned the touchpad off.
    I found out there is no option for acceleration and sensitivity.
    I read about wayland/gnome-settings-daemon:
    Launches mousetweaks and gsd-locate-pointer as required and applies settings to input devices (mouse and touchpad). Under Wayland, the mouse accessibility features and the locate pointer need to be implemented in the compositor, and the settings naturally belong there as well.
    And about wayland/libinput touchpad speed settings
    The code we currently have in libinput is pretty much 1:1 what's used in the X server. The X server sports a lot more configuration options, but what we have in libinput 0.4.0 is essentially what the default acceleration settings are in X. Armed with the knowledge that any #define is a potential knob for configuration I went to investigate. There are two defines that are labelled as adjustible parameters:
        DEFAULT_THRESHOLD, set to 0.4
        DEFAULT_ACCELERATION, set to 2.0
    But what do they mean, exactly? And what exactly does a value of 0.4 represent?
    Right now, I guess one needs to change the paramters in the code of libinput.

  • Changing minimum mouse speed

    Hi all. I've used "xset m 4 0" to set the mouse speed to something usable, but it's still too slow when I move the trackpoint slowly (before acceleration kicks in, that is). Is there any way of increasing the slowest speed of the mouse? It seems strange that the xset m command only gives you control over the acceleration and threshold... Where's the good old 'sensitivity' option?
    Oh, and adding Option "MinSpeed" "9" to xorg.conf seems to have no effect...
    Thanks!

    Please note:
    I need to do this in java so using a JNI dispatch into a dll is not going to be okay. So that option is not open to me. Just in case you are thinking of entering that solution. The solution also has to be interactive so that would seem to leave out the Robot solution.
    Honestly, with these two conditions I think that I have closed the door, or had it closed on me, to any solution to this problem. I am just posting this question before pursuing another mechanism.

Maybe you are looking for

  • Bind XML data to PDF417 barcode - LiveCycle Designer ES

    Trying to create a shipping form for a supplier that contains a PDF417 barcode.  The source data will come from an XML data file.  The form in not interactive, the data file will simply populate the pdf form, read-only via a Coldfusion program that q

  • Solaris 10 on Netra T1 install issues....

    I have gentoo installed on my netraT1 (which is apparently in the sun4u Platform Group) it has a 500mhz UltraSparc IIe processor and 1Gig of RAM. I decided to try solaris 10 so I downloaded all the cd images to my winows machine and used nero to burn

  • "Tris"

    I havent used the app store in a couple days, and when I went on today I noticed that tris was no longer #1 on the free top 25. I did a search in the app store and nothing came up. What happened to the app? It was a great app and a lot of fun. Why wo

  • ACS SE 4.0 - https login failed

    Hi, I have switched the ACS from http to https mode after generating a Self-Signed Certificate. After rebooting the ACS, there is no way to connect via a webbrowser. Only the console login works. Is there a possibility to uninstall the certificates f

  • Mac Book help

    I recently updated my mac book to snow leopard and now I am unable to access youtube videos, I am getting a message (blocked plug-in) what do I do?