[Solved] mpd --create-db not working

Afrer updating
$ pacman -Q mpd
mpd 0.16-2
I get this error
$ mpd /home/doctor/.mpd/mpd.conf --create-db
** (mpd:6415): CRITICAL **: option parsing failed: Unknown option --create-db
So how should I create a new database now?
Last edited by Doctor Drive (2010-12-18 12:13:01)

'mpc update'.
--create-db have been deprecated since 0.15

Similar Messages

Mpd --create-db not work?

$ mpd --create-db
$ cmdline: invalid option: --create-db
why?--create-db did not work for mpd anymore?

Its unbelievable. this option is gone for 6 years now. and people still complain

[SOLVED] Xorg and keyboard not working after upgrade.

Hi guys,
after a `# pacman -Syyu` I got Xorg not starting and keyboard not working: I am unable to do anything.
I'm posting here pacman's log that I got by booting an Ubuntu Live CD: https://gist.github.com/anonymous/7517806
Any hint?
How do you recover a system once it's gone like this? Many thanks in advance.
J
Last edited by ifsixwasnine (2013-12-23 13:58:16)

WonderWoofy wrote:
I wouldn't necessarily call this [SOLVED]. At best I would probably mention that you found a workaround. The addition of '(downgrade)' likely makes it fine, but just FYI for future threads. There are two reasons for this. One, others who find this thread are likely to dig into it thinking there is a real solution, and two, if you mark it as [Solved] it might generate less attention, lessening the chances of you actually being helped to a real solution.
Just my 1.46¢
You're right, problem wasn't actually solved. In fact, yesterday I upgraded the whole system again and the same problem showed up, but I got it fixed.
Same scenario: after a boot (shorter than usual), what I had was a tty, but I noticed something that I hadn't noticed the last time: the prompt said "Arch Linux 3.11.[?]".
The kernel version was supposed to be 3.12.[?] so I started investigating and after several attempts, this is how I got the system working again:
1. Chrooted into the system
2. Wiped /boot
3. Re-installed grub
4. Re-installed linux kernel
5. Re-created grub.cfg
6. ???
7. Profit
I'm pretty sure that what originated the problem wasn't a "kernel issue" as I pointed out in my previous post, but it was an incorrect installation of grub: in fact, the grub prompt never showed up before yesterday, the system used to boot straight, ignoring the 5 seconds timeout.

[SOLVED] DPMS screen off not working with xorg 1.16.0, gnome 3

After the update of xorg into 1.16.0-2, screen is not turned off by DPMS in GNOME.
I also tried an manual command:
$ xset dpms force off
but it's not working.
In other WM, this command is working.
With xorg 1.15.2 and gnome 3, there is not this problem.
When I entered the command, the screen turned off for a couple of seconds and turned back on.
Last edited by esrevinu (2014-07-22 23:35:07)

Updating xf86-video-intel to 2.99.912-4 solved the problem.
Thanks.

[solved] NFS client will not work correctly

I have all my $HOME on an NFS Server. So long I used suse and debian, now I want switch to arch but the nfs-client ist not working correctly:
I start "portmap nfslock nfsd netfs" over rc.conf. When I do a "rpcinfo -p <ip-arch-system>" I got the following
stefan:/home/stefan # rpcinfo -p 192.168.123.3
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100003 2 udp 2049 nfs
100003 3 udp 2049 nfs
100003 4 udp 2049 nfs
100021 1 tcp 48988 nlockmgr
100021 3 tcp 48988 nlockmgr
100021 4 tcp 48988 nlockmgr
100003 2 tcp 2049 nfs
100003 3 tcp 2049 nfs
100003 4 tcp 2049 nfs
100005 3 udp 891 mountd
100005 3 tcp 894 mountd
As you see "status" is missing, so the statd is not running. It sould look like the result on my suse box:
stefan:/home/stefan # rpcinfo -p 192.168.123.2
Program Vers Proto Port
100000 2 tcp 111 portmapper
100000 2 udp 111 portmapper
100024 1 udp 32768 status
100021 1 udp 32768 nlockmgr
100021 3 udp 32768 nlockmgr
100021 4 udp 32768 nlockmgr
100024 1 tcp 35804 status
100021 1 tcp 35804 nlockmgr
100021 3 tcp 35804 nlockmgr
100021 4 tcp 35804 nlockmgr
There is the "status" line and so the statd is running.
How can I fix that problem, so that statd ist running on my arch box too?
Last edited by stka (2007-06-10 15:59:48)

The Problem ist solved.
I use ldap for authentication. During the setup of the ldapclient I copied the nsswitch.ldap to nsswitch.conf. But the line for "hosts:" was:
hosts: dns ldap
but in my dns ist no localhost entry. After I changed this line to:
hosts: files dns ldap
everything was ok. The statd is now running and I can start to migrate to archlinux ;-)

[SOLVED] snd_atiixp / Realtek ALC655 - not working

Well, i bought new motherboard MS-7031 with ATI chipset (ATI Radeon 9100 IGP Pro) and i can't run sound in linux system. In Ubuntu Live CD 7.10 sound don't work too. I found some solutions in google but don't help. I haven actually new kernel. System load modules but not created device files...
Sound card: 6 channels S/W audio codec Realtek ALC655 code
lspci | grep -i audio
00:14.5 Multimedia audio controller: ATI Technologies Inc Unknown device 4361 (rev 03
lsmod|grep snd
snd_seq_oss 30336 0
snd_seq_midi_event 6656 1 snd_seq_oss
snd_seq 48432 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6796 2 snd_seq_oss,snd_seq
snd_pcm_oss 38656 0
snd_mixer_oss 14848 1 snd_pcm_oss
snd_atiixp 15756 0
snd_ac97_codec 97828 1 snd_atiixp
ac97_bus 2048 1 snd_ac97_codec
snd_pcm 68228 3 snd_pcm_oss,snd_atiixp,snd_ac97_codec
snd_timer 19848 2 snd_seq,snd_pcm
snd 46628 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_atiixp,snd_ac97_codec,snd_pcm,snd_timer
soundcore 6496 1 snd
snd_page_alloc 8072 2 snd_atiixp,snd_pcm
ls -l /dev/snd/
crw-rw---- 1 root audio 116, 3 cze 21 21:11 seq
crw-rw---- 1 root audio 116, 2 cze 21 21:11 timer
/etc/rc.d/alsa start and alsactl store get error:
/usr/sbin/alsactl: load_state:1573: No soundcards found...
alsamixer
alsamixer: function snd_ctl_open failed for default: No such file or directory
alsaconf fonud card but not working.
I try:
- reinstalling alsa
- Realtek drivers (alsa-drivers)
- add snd_atiixp_modem to black list,
- add modules to rc.conf
- compiling new alsa with alsa wiki solution
- compiling new kernel with alsa and sound driver as module and next time as built-in
and nothing...
erros when system boot:
atiixp: codec read timeout
AC'97 2 does not respond - RESET
AC'97 2 access is not valid [0xffffffff], removing mixer.
atiixp: no codec available
// sorry for english
Last edited by dikamilo (2008-07-06 17:32:47)

Try it with adding
options snd-atiixp ac97_codec=0
to your /etc/modprobe.conf.

[Solved] Wacom pen buttons not working

Hi, this is probably simple to fix, but I don't understand everything well enough to get it set up. I have a Fujitsu T5010 with internal Wacom tablet. The Wacom drivers are installed. I can use the pen to move the pointer, and click. However, the buttons on the side of the pen do not work. Also, the eraser end of the pen seems to register as an ordinary single click, rather than a separate input.
Here are some relevant outputs:
$ xsetwacom get "Serial Wacom Tablet FUJ02e5 stylus" all
Option "Area" "0 0 28808 18080"
'Button' requires exactly 1 value(s).
Option "ToolDebugLevel" "0"
Option "TabletDebugLevel" "0"
Option "Suppress" "2"
Option "RawSample" "4"
Option "PressureCurve" "0 0 100 100"
Option "Mode" "Absolute"
Option "TabletPCButton" "on"
Option "Touch" "off"
Option "Gesture" "off"
Option "ZoomDistance" "0"
Option "ScrollDistance" "0"
Option "TapTime" "250"
Property 'Wacom Proximity Threshold' does not exist on device.
Option "Rotate" "none"
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Option "Threshold" "27"
Option "ToolType" "325"
Option "ToolSerial" "0"
Option "ToolID" "0"
Option "ToolSerialPrevious" "0"
Option "BindToSerial" "0"
Option "TabletID" "144"
and
$ xsetwacom get "Serial Wacom Tablet FUJ02e5 eraser" all
Option "Area" "0 0 28808 18080"
'Button' requires exactly 1 value(s).
Option "ToolDebugLevel" "0"
Option "TabletDebugLevel" "0"
Option "Suppress" "2"
Option "RawSample" "4"
Option "PressureCurve" "0 0 100 100"
Option "Mode" "Absolute"
Property 'Wacom Hover Click' does not exist on device.
Option "Touch" "off"
Option "Gesture" "off"
Option "ZoomDistance" "0"
Option "ScrollDistance" "0"
Option "TapTime" "250"
Property 'Wacom Proximity Threshold' does not exist on device.
Option "Rotate" "none"
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Wheel Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Property 'Wacom Strip Buttons' does not exist on device.
Option "Threshold" "27"
Option "ToolType" "379"
Option "ToolSerial" "0"
Option "ToolID" "0"
Option "ToolSerialPrevious" "0"
Option "BindToSerial" "0"
Option "TabletID" "144"
Also, I have no /etc/X11/xorg.conf, but I do have a /etc/X11/xorg.conf.d/50-wacom.conf, which looks like
$ cat /etc/X11/xorg.conf.d/50-wacom.conf
Section "InputClass"
Identifier "Wacom class"
MatchProduct "Wacom|WACOM|Hanwang|PTK-540WL"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection
Section "InputClass"
Identifier "Wacom serial class"
MatchProduct "Serial Wacom Tablet"
Driver "wacom"
EndSection
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
EndSection
# Waltop tablets
Section "InputClass"
Identifier "Waltop class"
MatchProduct "WALTOP"
MatchIsTablet "on"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
EndSection
# N-Trig Duosense Electromagnetic Digitizer
Section "InputClass"
Identifier "Wacom N-Trig class"
MatchProduct "HID 1b96:0001|N-Trig Pen"
MatchDevicePath "/dev/input/event*"
Driver "wacom"
Option "Button2" "3"
EndSection
I am running 64-bit Arch, installed only a month ago (so completely systemd), and fully up to date as of last night.
Last edited by khelar (2012-12-13 19:03:54)

Never mind, I solved my own issue. In my /etc/X11/xorg.conf.d/50-wacom.conf, I modified the following section
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
EndSection
to read
Section "InputClass"
Identifier "Wacom serial class identifiers"
MatchProduct "WACf|FUJ02e5|FUJ02e7|FUJ02e9"
Driver "wacom"
Option "Button1" "1"
Option "Button2" "2"
Option "Button3" "3"
EndSection

[SOLVED] cat6500 vlan filtering not working

Hello!
I have cat 6500 with SUP32-GE-3B/MSFC2A/PFC3B, s3223-adventerprisek9-mz.122-33.SXJ6.bin,
and WS-X6148-GE-TX module.
And I have a couple of 3750G.
On all of 3750G there is a broadcast filtering of VLAN 4000, and it's working:
mac access-list extended badhosts
permit any host ffff.ffff.ffff
vlan access-map dropbad 10
action drop
match mac address badhosts
vlan access-map dropbad 20
action forward
vlan filter dropbad vlan-list 4000
Then i copy this config to 6500, and it's not working. I configured two ports, one is switchport access vlan 4000 and other is switchport capture allowed vlan 4000, and i see on both ports same broadcast traffic. Filter is working, but packets are not dropping. I've tried to find something in manual, but found only about platform cwan acl software-switched, enabled it, nothing changed.
cat6500# sh vlan filter
VLAN Map dropbad:
Configured on VLANs: 4000
Active on VLANs: 4000

i think i solve the problem: to make vlan filtering to work on 6500, i've added:
# conf t
(config)# int vlan 4000
(config-if)# no shut
(config-if)# mac packet-classify
Now, how to mark this question answered?

[SOLVED] USB webcam mic not working in Skype after pulseaudio install

I've followed the advice in the wikis
https://wiki.archlinux.org/index.php/skype#Skype_sound
https://wiki.archlinux.org/index.php/Al … ure_device
but it's still not working. Hoping someone can help me troubleshoot. I did a test video using guvcview and the mic worked fine and the video had audio.
Solution:
Uninstalled pulseaudio
Installed apulse from AUR
Created and edited ~/.asoundrc as per https://wiki.archlinux.org/index.php/Al … ure_device
Invoke skype:
$ apulse skype
Last edited by bpont (2014-11-17 05:44:24)

Do you have pulseaudio installed or not? both of the solutions you posted are intended to be used if one doesn't want to use pulseaudio and both aren't necessary if you are actually using pulseaudio.

[Problem Solved] On screen display not working on T60

I replace my xp with a Vista Business.
All the drivers are installed. But the on screen display is not working well. Nothing display when I press the volume up/down/mute button. However, other buttons like Fn+F3, Fn+F5 do display on screen.
Anyone knows how to solve this?
Thanks a lot.
Message Edited by szsy on 10-02-2008 08:11 PM
Solved!
Go to Solution.

problem solved.
looks like I need to install a Lenovo System Interface Driver. This is just for ATI graphic card users and nVidia users don't need it.
Thanks a lot.

[SOLVED] Internal Speaker (pcsp) not working

UPDATE: solved muting all Analog Loopback channels in alsamixer
Hi everybody,
i'm tuning the lucky arch installation on a DELL Studio XPS 13. No troubles in video card configuration, neither in wireless drivers, but i'm getting big problems with audio playback. I mean every kind of audio playback.
I firstly read out the docs and topics around here but couldn't find a solution. Alsaconf says ok, alsamixer channels activated and configuration stored, but audio playing software (kde sounds, juk, amarok, vlc, flashplugin) is not producing any sound. As these softwares are not complaining about audio matters, and the multimedia module in Kde Control is describing this only as not working, i suppose the cause must be pcsp (which i disabled rc.conf).
Some more info:
bash-3.2# lsmod | grep snd
snd_hda_codec_nvhdmi 2740 1
snd_hda_codec_idt 55732 1
snd_seq_oss 29888 0
snd_seq_midi_event 5972 1 snd_seq_oss
snd_seq 48176 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 6080 2 snd_seq_oss,snd_seq
snd_hda_intel 25384 2
snd_hda_codec 60340 3 snd_hda_codec_nvhdmi,snd_hda_codec_idt,snd_hda_intel
snd_hwdep 6904 1 snd_hda_codec
snd_pcm_oss 38112 0
snd_pcm 67992 3 snd_hda_intel,snd_hda_codec,snd_pcm_oss
snd_timer 19260 2 snd_seq,snd_pcm
snd_page_alloc 8092 2 snd_hda_intel,snd_pcm
snd_mixer_oss 14388 1 snd_pcm_oss
snd 51460 15 snd_hda_codec_idt,snd_seq_oss,snd_seq,snd_seq_device,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
soundcore 6080 1 snd
bash-3.2# cat /etc/modprobe.conf
# /etc/modprobe.conf (for v2.6 kernels)
options snd-pcsp index=2
bash-3.2# cat /etc/modprobe.conf
# /etc/modprobe.conf (for v2.6 kernels)
options snd-pcsp index=2
Any help is really appreciated, thank you
Miche
Last edited by Miche (2009-05-03 09:48:53)

mcover wrote:
snd-pcsp and pcspkr both claim the same hardware and are both responsible for making your machine "beep" - i disabled both of them. you don't need them for your audio-playback. looking for issues of your sound-output by suspecting snd-pcsp or pcspkr is a dead end.
getting sound can sometimes be an adventure, i had that problem before. but often it just turns out to be some well hidden mute switch in alsamixer or some volume settings. it might be a problem with kde4's sound server. i don't use kde4 on a regular basis, so i can't help too much with that (back when i used kde3 i had to configure aRts but kde4 discontinued aRts in favor of phonon).
absolutly needed quotation as in the end it has been discovered that in-activating Analog Loopback channels in alsamixer solved the problem
i'm not sure this was the unique step in order to get alsa working (i read and followed suggentions from many many forums and wikis) but finally i found a post where the problem for a sound blaster owner was solved disabling the iec958 channel. That was the input for a deeper research in alsamixer configuration.
Thank you very much. keep enjoyng archlinux.
Miche

[SOLVED] Direct Rendering is not working with Catalyst 8.6-1.

I own an ATI Radeon X1300, and everything was working flawlessly with Catalyst 8.5-1, and when I updated the drivers, DRI stopped working. It has happened with me in the past, and the only solution I had found then was to downgrade the drivers. I appreciate your help.
Here is my /etc/X11/Xorg.conf:
Section "ServerLayout"
Identifier "Xorg Configured"
Screen 0 "aticonfig-Screen[0]" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "PS/2 Mouse" "CorePointer"
EndSection
Section "Files"
RgbPath "/usr/share/X11/rgb"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc:unscaled"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/PEX"
FontPath "/usr/share/fonts/cyrillic"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/share/fonts/ttf/western"
FontPath "/usr/share/fonts/ttf/decoratives"
FontPath "/usr/share/fonts/truetype"
FontPath "/usr/share/fonts/truetype/openoffice"
FontPath "/usr/share/fonts/truetype/ttf-bitstream-vera"
FontPath "/usr/share/fonts/latex-ttf-fonts"
FontPath "/usr/share/fonts/defoma/CID"
FontPath "/usr/share/fonts/defoma/TrueType"
EndSection
Section "Module"
Load "ddc" # ddc probing of monitor
Load "dbe"
Load "dri"
Load "extmod"
Load "glx"
Load "bitmap" # bitmap-fonts
Load "type1"
Load "freetype"
Load "record"
EndSection
Section "ServerFlags"
Option "AllowMouseOpenFail" "true"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "keyboard"
Option "CoreKeyboard"
Option "XkbModel" "abnt2"
Option "XkbLayout" "br"
EndSection
Section "InputDevice"
Identifier "Serial Mouse"
Driver "mouse"
Option "Protocol" "Microsoft"
Option "Device" "/dev/ttyS0"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "PS/2 Mouse"
Driver "mouse"
Option "Protocol" "auto"
Option "ZAxisMapping" "4 5"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "true"
Option "Emulate3Timeout" "70"
Option "SendCoreEvents" "true"
EndSection
Section "InputDevice"
Identifier "USB Mouse"
Driver "mouse"
Option "Device" "/dev/input/mice"
Option "SendCoreEvents" "true"
Option "Protocol" "IMPS/2"
Option "ZAxisMapping" "4 5"
Option "Buttons" "5"
EndSection
Section "Monitor"
Identifier "aticonfig-Monitor[0]"
Option "VendorName" "ATI Proprietary Driver"
Option "ModelName" "Generic Autodetecting Monitor"
Option "DPMS" "true"
DisplaySize 338 270 # 1280x1024 96dpi
EndSection
Section "Device"
Identifier "aticonfig-Device[0]"
Driver "fglrx"
EndSection
Section "Screen"
Identifier "aticonfig-Screen[0]"
Device "aticonfig-Device[0]"
Monitor "aticonfig-Monitor[0]"
DefaultDepth 24
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Section "DRI"
Mode 0666
EndSection
Here is my /var/log/Xorg.0.log:
X.Org X Server 1.4.2
Release Date: 11 June 2008
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.25-ARCH i686
Current Operating System: Linux localhost 2.6.25-ARCH #1 SMP PREEMPT Sat Jun 14 18:07:19 CEST 2008 i686
Build Date: 21 June 2008 05:47:59PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Module Loader present
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jun 23 13:57:45 2008
(==) Using config file: "/etc/X11/xorg.conf"
(==) ServerLayout "Xorg Configured"
(**) |-->Screen "aticonfig-Screen[0]" (0)
(**) | |-->Monitor "aticonfig-Monitor[0]"
(**) | |-->Device "aticonfig-Device[0]"
(**) |-->Input Device "Keyboard0"
(**) |-->Input Device "PS/2 Mouse"
(**) Option "AllowMouseOpenFail" "true"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/share/fonts/PEX" does not exist.
Entry deleted from font path.
(WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/cyrillic".
Entry deleted from font path.
(Run 'mkfontdir' on "/usr/share/fonts/cyrillic").
(WW) The directory "/usr/share/fonts/ttf/western" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/ttf/decoratives" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/openoffice" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/truetype/ttf-bitstream-vera" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/latex-ttf-fonts" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/CID" does not exist.
Entry deleted from font path.
(WW) The directory "/usr/share/fonts/defoma/TrueType" does not exist.
Entry deleted from font path.
(==) Including the default font path /usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/share/fonts/TTF,/usr/share/fonts/Type1.
(**) FontPath set to:
/usr/share/fonts/misc:unscaled,
/usr/share/fonts/misc,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/100dpi,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1
(**) RgbPath set to "/usr/share/X11/rgb"
(**) ModulePath set to "/usr/lib/xorg/modules"
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) Loader magic: 0x81e0a60
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.3
X.Org Video Driver: 2.0
X.Org XInput driver : 2.0
X.Org Server Extension : 0.3
X.Org Font Renderer : 0.5
(II) Loader running on linux
(II) LoadModule: "pcidata"
(II) Loading /usr/lib/xorg/modules//libpcidata.so
(II) Module pcidata: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 2.0
(++) using VT number 7
(II) PCI: PCI scan (all values are in hex)
(II) PCI: 00:00:0: chip 10de,005e card 1043,815a rev a3 class 05,80,00 hdr 00
(II) PCI: 00:01:0: chip 10de,0050 card 1043,815a rev f3 class 06,01,00 hdr 80
(II) PCI: 00:01:1: chip 10de,0052 card 1043,815a rev a2 class 0c,05,00 hdr 80
(II) PCI: 00:02:0: chip 10de,005a card 1043,815a rev a2 class 0c,03,10 hdr 80
(II) PCI: 00:02:1: chip 10de,005b card 1043,815a rev a3 class 0c,03,20 hdr 80
(II) PCI: 00:06:0: chip 10de,0053 card f043,815a rev f2 class 01,01,8a hdr 00
(II) PCI: 00:07:0: chip 10de,0054 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:08:0: chip 10de,0055 card 1043,815a rev f3 class 01,01,85 hdr 00
(II) PCI: 00:09:0: chip 10de,005c card 0000,0000 rev f2 class 06,04,01 hdr 01
(II) PCI: 00:0a:0: chip 10de,0057 card 1043,812a rev f3 class 06,80,00 hdr 00
(II) PCI: 00:0b:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0c:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0d:0: chip 10de,005d card 0000,0000 rev f3 class 06,04,00 hdr 01
(II) PCI: 00:0e:0: chip 10de,005d card 0000,0000 rev a3 class 06,04,00 hdr 01
(II) PCI: 00:18:0: chip 1022,1100 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:1: chip 1022,1101 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:2: chip 1022,1102 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 00:18:3: chip 1022,1103 card 0000,0000 rev 00 class 06,00,00 hdr 80
(II) PCI: 01:01:0: chip 1106,3044 card 1043,81fe rev c0 class 0c,00,10 hdr 00
(II) PCI: 05:00:0: chip 1002,7187 card 17ee,7187 rev 00 class 03,00,00 hdr 80
(II) PCI: 05:00:1: chip 1002,71a7 card 17ee,7186 rev 00 class 03,80,00 hdr 00
(II) PCI: End of PCI scan
(II) PCI-to-ISA bridge:
(II) Bus -1: bridge is at (0:1:0), (0,-1,-1), BCTRL: 0x0008 (VGA_EN is set)
(II) Subtractive PCI-to-PCI bridge:
(II) Bus 1: bridge is at (0:9:0), (0,1,1), BCTRL: 0x0204 (VGA_EN is cleared)
(II) Bus 1 I/O range:
[0] -1 0 0x0000a000 - 0x0000a0ff (0x100) IX[b]
[1] -1 0 0x0000a400 - 0x0000a4ff (0x100) IX[b]
[2] -1 0 0x0000a800 - 0x0000a8ff (0x100) IX[b]
[3] -1 0 0x0000ac00 - 0x0000acff (0x100) IX[b]
(II) Bus 1 non-prefetchable memory range:
[0] -1 0 0xfdf00000 - 0xfdffffff (0x100000) MX[b]
(II) PCI-to-PCI bridge:
(II) Bus 2: bridge is at (0:11:0), (0,2,2), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 3: bridge is at (0:12:0), (0,3,3), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 4: bridge is at (0:13:0), (0,4,4), BCTRL: 0x0004 (VGA_EN is cleared)
(II) PCI-to-PCI bridge:
(II) Bus 5: bridge is at (0:14:0), (0,5,5), BCTRL: 0x000c (VGA_EN is set)
(II) Bus 5 I/O range:
[0] -1 0 0x00009000 - 0x000090ff (0x100) IX[b]
[1] -1 0 0x00009400 - 0x000094ff (0x100) IX[b]
[2] -1 0 0x00009800 - 0x000098ff (0x100) IX[b]
[3] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b]
(II) Bus 5 non-prefetchable memory range:
[0] -1 0 0xfde00000 - 0xfdefffff (0x100000) MX[b]
(II) Bus 5 prefetchable memory range:
[0] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
(II) Host-to-PCI bridge:
(II) Bus 0: bridge is at (0:24:0), (0,0,5), BCTRL: 0x0008 (VGA_EN is set)
(II) Bus 0 I/O range:
[0] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) Bus 0 non-prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(II) Bus 0 prefetchable memory range:
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
(--) PCI:*(5:0:0) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] rev 0, Mem @ 0xd0000000/28, 0xfdef0000/16, I/O @ 0x9c00/8, BIOS @ 0xfdec0000/17
(--) PCI: (5:0:1) ATI Technologies Inc RV516 [Radeon X1300/X1550 Series] (Secondary) rev 0, Mem @ 0xfdee0000/16
(II) Addressable bus resource ranges are
[0] -1 0 0x00000000 - 0xffffffff (0x0) MX[b]
[1] -1 0 0x00000000 - 0x0000ffff (0x10000) IX[b]
(II) OS-reported resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) Active PCI resource ranges:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) Active PCI resource ranges after removing overlaps:
[0] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[1] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[2] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[3] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[4] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[5] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[6] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[7] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[8] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[9] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[10] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[11] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[12] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[13] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[14] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[15] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[16] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[17] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[18] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[19] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[20] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[21] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[22] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[23] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[24] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[25] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) Inactive PCI resource ranges after removing overlaps:
[0] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
(II) OS-reported resource ranges after removing overlaps with PCI:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
(II) All system resource ranges:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded. This was enabled by default and also specified in the config file.
(II) "freetype" will be loaded. This was enabled by default and also specified in the config file.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension XFree86-DRI
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension SHAPE
(II) Loading extension MIT-SUNDRY-NONSTANDARD
(II) Loading extension BIG-REQUESTS
(II) Loading extension SYNC
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XC-MISC
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-Misc
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension TOG-CUP
(II) Loading extension Extended-Visual-Information
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "type1"
(WW) Warning, couldn't open module type1
(II) UnloadModule: "type1"
(EE) Failed to load module "type1" (module does not exist, 0)
(II) LoadModule: "freetype"
(II) Loading /usr/lib/xorg/modules/fonts//libfreetype.so
(II) Module freetype: vendor="X.Org Foundation & the After X-TT Project"
compiled for 1.4.2, module version = 2.1.0
Module class: X.Org Font Renderer
ABI class: X.Org Font Renderer, version 0.5
(II) Loading font FreeType
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 0.3
(II) Loading extension RECORD
(II) LoadModule: "fglrx"
(II) Loading /usr/lib/xorg/modules/drivers//fglrx_drv.so
(II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
Module class: X.Org Video Driver
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.3.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.4.0, module version = 1.2.3
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 2.0
(II) Primary Device is: PCI 05:00:0
(II) ATI Proprietary Linux Driver Version Identifier:8.50.3
(II) ATI Proprietary Linux Driver Release Identifier: UNSUPPORTED-8.501
(II) ATI Proprietary Linux Driver Build Date: Jun 2 2008 22:46:56
(--) Assigning device section with no busID to primary device
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(--) Chipset Supported AMD Graphics Processor (0x7187) found
(WW) fglrx: No matching Device section for instance (BusID PCI:5:0:1) found
(II) AMD Video driver is running on a device belonging to a group targeted for this release
(II) AMD Video driver is signed
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[15] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[16] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[17] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[18] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[19] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[20] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[21] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[22] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[23] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[24] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[25] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[26] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[27] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[28] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[29] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[30] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[31] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[32] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
(II) fglrx(0): pEnt->device->identifier=0x9fa1880
(II) resource ranges after probing:
[0] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[5] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[6] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[7] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[8] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[9] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[10] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[11] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[12] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[13] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[14] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[15] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[16] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[17] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[18] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[19] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[20] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[21] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[22] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[23] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[24] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[25] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[26] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[27] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[28] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[29] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[30] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[31] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[32] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[33] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[34] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[35] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[36] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[37] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) fglrx(0): === [atiddxPreInit] === begin
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): PCI bus 5 card 0 func 0
(**) fglrx(0): Depth 24, (--) framebuffer bpp 32
(II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) fglrx(0): Default visual is TrueColor
(**) fglrx(0): Option "DPMS" "true"
(II) fglrx(0): Loading PCS database from /etc/ati/amdpcsdb
(==) fglrx(0): RGB weight 888
(II) fglrx(0): Using 8 bits per RGB (8 bit DAC)
(==) fglrx(0): Gamma Correction for I is 0x06419064
(==) fglrx(0): Gamma Correction for II is 0x06419064
(==) fglrx(0): Buffer Tiling is ON
(--) fglrx(0): Chipset: "Radeon X1300/X1550 Series" (Chipset = 0x7187)
(--) fglrx(0): (PciSubVendor = 0x17ee, PciSubDevice = 0x7187)
(--) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
(--) fglrx(0): Linear framebuffer (phys) at 0xd0000000
(--) fglrx(0): MMIO registers at 0xfdef0000
(==) fglrx(0): ROM-BIOS at 0x000c0000
(II) fglrx(0): Primary V_BIOS segment is: 0xc000
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.1.0
ABI class: X.Org Video Driver, version 2.0
(II) fglrx(0): VESA BIOS detected
(II) fglrx(0): VESA VBE Version 3.0
(II) fglrx(0): VESA VBE Total Mem: 16384 kB
(II) fglrx(0): VESA VBE OEM: ATI ATOMBIOS
(II) fglrx(0): VESA VBE OEM Software Rev: 9.12
(II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2005, ATI Technologies Inc.
(II) fglrx(0): VESA VBE OEM Product: RV515
(II) fglrx(0): VESA VBE OEM Product Rev: 01.00
(II) fglrx(0): ATI Video BIOS revision 9 or later detected
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Loading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
compiled for 7.1.0, module version = 8.50.3
ABI class: X.Org Server Extension, version 0.3
(II) fglrx(0): Using adapter: 5:0.0.
(II) fglrx(0): [FB] Find the MC FB aperturs range(MCFBBase = 0xc0000000, MCFBSize = 0x10000000)
(--) fglrx(0): VideoRAM: 262144 kByte, Type: DDR1
(II) fglrx(0): PCIE card detected
(WW) fglrx(0): board is an unknown third party board, chipset is supported
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"(II) Module "ddc" already built-in
(II) fglrx(0): Connected Display1: CRT on secondary DAC [crt2]
(II) fglrx(0): Display1 EDID data ---------------------------
(II) fglrx(0): Manufacturer: PHL Model: 13 Serial#: 1850
(II) fglrx(0): Year: 2005 Week: 9
(II) fglrx(0): EDID Version: 1.3
(II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
(II) fglrx(0): Sync: Separate
(II) fglrx(0): Max H-Image Size [cm]: horiz.: 32 vert.: 24
(II) fglrx(0): Gamma: 2.20
(II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
(II) fglrx(0): First detailed timing is preferred mode
(II) fglrx(0): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608
(II) fglrx(0): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
(II) fglrx(0): Supported VESA Video Modes:
(II) fglrx(0): 720x400@70Hz
(II) fglrx(0): 640x480@60Hz
(II) fglrx(0): 640x480@75Hz
(II) fglrx(0): 800x600@75Hz
(II) fglrx(0): 1024x768@75Hz
(II) fglrx(0): Manufacturer's mask: 0
(II) fglrx(0): Supported Future Video Modes:
(II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
(II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
(II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
(II) fglrx(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) fglrx(0): Supported additional Video Mode:
(II) fglrx(0): clock: 94.5 MHz Image Size: 310 x 230 mm
(II) fglrx(0): h_active: 1024 h_sync: 1072 h_sync_end 1168 h_blank_end 1376 h_border: 0
(II) fglrx(0): v_active: 768 v_sync: 769 v_sync_end 772 v_blanking: 808 v_border: 0
(II) fglrx(0): Serial No: 09301850
(II) fglrx(0): Monitor name: Philips 107Et
(II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 72 kHz, PixClock max 110 MHz
(II) fglrx(0): EDID (in hex):
(II) fglrx(0): 00ffffffffffff00410c13003a070000
(II) fglrx(0): 090f0103682018782a4f29a057499b26
(II) fglrx(0): 10484ca4420031594559615981800101
(II) fglrx(0): 010101010101ea240060410028303060
(II) fglrx(0): 130036e61000001e000000ff00303933
(II) fglrx(0): 30313835300a20202020000000fc0050
(II) fglrx(0): 68696c697073203130374574000000fd
(II) fglrx(0): 0032a01e480b000a20202020202000b2
(II) fglrx(0): End of Display1 EDID data --------------------
(WW) fglrx(0): Only one display is connnected,so single mode is enabled
(II) fglrx(0): Primary Controller - CRT on secondary DAC
(II) fglrx(0): Internal Desktop Setting: 0x00000001
(II) fglrx(0): POWERplay not supported on this hardware
(==) fglrx(0): Qbs is not supported in this release. Disabled.
(==) fglrx(0): FAST_SWAP disabled
(==) fglrx(0): PseudoColor visuals disabled
(==) fglrx(0): Using gamma correction (1.0, 1.0, 1.0)
(==) fglrx(0): Center Mode is disabled
(==) fglrx(0): TMDS coherent mode is enabled
(II) fglrx(0): Total of 40 modes found for primary display.
(--) fglrx(0): Virtual size is 1280x1024 (pitch 0)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(**) fglrx(0): Display dimensions: (338, 270) mm
(WW) fglrx(0): Probed monitor is 320x240 mm, using Displaysize 338x270 mm
(**) fglrx(0): DPI set to (96, 96)
(--) fglrx(0): Virtual size is 1280x1024 (pitch 1280)
(**) fglrx(0): *Mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 (64.0 kHz)
(**) fglrx(0): Default mode "1280x1024": 85.5 MHz (scaled from 0.0 MHz), 50.9 kHz, 47.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x47.0 85.51 1280 1344 1480 1680 1024 1025 1028 1083 interlace +hsync (50.9 kHz)
(**) fglrx(0): Default mode "1280x1024": 77.8 MHz (scaled from 0.0 MHz), 46.3 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1280x1024"x43.0 77.80 1280 1344 1480 1680 1024 1025 1028 1077 interlace +hsync (46.3 kHz)
(**) fglrx(0): *Mode "1280x960": 108.0 MHz (scaled from 0.0 MHz), 60.0 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 (60.0 kHz)
(**) fglrx(0): *Mode "1280x768": 79.5 MHz (scaled from 0.0 MHz), 47.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x768"x60.0 79.50 1280 1344 1472 1664 768 771 778 798 +hsync (47.8 kHz)
(**) fglrx(0): *Mode "1280x720": 74.5 MHz (scaled from 0.0 MHz), 44.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1280x720"x60.0 74.48 1280 1336 1472 1664 720 721 724 746 +hsync (44.8 kHz)
(**) fglrx(0): *Mode "1152x864": 81.6 MHz (scaled from 0.0 MHz), 53.7 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1152x864"x60.0 81.62 1152 1216 1336 1520 864 865 868 895 +hsync (53.7 kHz)
(**) fglrx(0): Default mode "1152x864": 58.3 MHz (scaled from 0.0 MHz), 39.2 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1152x864"x43.0 58.28 1152 1200 1320 1488 864 865 868 911 interlace +hsync (39.2 kHz)
(**) fglrx(0): *Mode "1024x768": 94.5 MHz (scaled from 0.0 MHz), 68.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 (68.7 kHz)
(**) fglrx(0): Default mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.0 kHz, 75.0 Hz
(II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 (60.0 kHz)
(**) fglrx(0): Default mode "1024x768": 78.4 MHz (scaled from 0.0 MHz), 57.7 kHz, 72.0 Hz
(II) fglrx(0): Modeline "1024x768"x72.0 78.43 1024 1080 1192 1360 768 769 772 801 +hsync (57.7 kHz)
(**) fglrx(0): Default mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.0 Hz
(II) fglrx(0): Modeline "1024x768"x70.0 75.00 1024 1048 1184 1328 768 771 777 806 +hsync +vsync (56.5 kHz)
(**) fglrx(0): Default mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
(II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 +hsync +vsync (48.4 kHz)
(**) fglrx(0): Default mode "1024x768": 44.9 MHz (scaled from 0.0 MHz), 35.5 kHz, 43.0 Hz (I)
(II) fglrx(0): Modeline "1024x768"x43.0 44.90 1024 1032 1208 1264 768 768 772 817 interlace (35.5 kHz)
(**) fglrx(0): *Mode "800x600": 56.2 MHz (scaled from 0.0 MHz), 53.7 kHz, 85.0 Hz
(II) fglrx(0): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 (53.7 kHz)
(**) fglrx(0): Default mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
(II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 (46.9 kHz)
(**) fglrx(0): Default mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.0 Hz
(II) fglrx(0): Modeline "800x600"x72.0 50.00 800 856 976 1040 600 637 643 666 (48.1 kHz)
(**) fglrx(0): Default mode "800x600": 45.5 MHz (scaled from 0.0 MHz), 43.8 kHz, 70.0 Hz
(II) fglrx(0): Modeline "800x600"x70.0 45.50 800 840 920 1040 600 601 604 625 +hsync (43.8 kHz)
(**) fglrx(0): Default mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.0 Hz
(II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 (37.9 kHz)
(**) fglrx(0): Default mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.0 Hz
(II) fglrx(0): Modeline "800x600"x56.0 36.00 800 824 896 1024 600 601 603 625 (35.2 kHz)
(**) fglrx(0): Default mode "800x600": 68.2 MHz (scaled from 0.0 MHz), 63.6 kHz, 100.0 Hz
(II) fglrx(0): Modeline "800x600"x100.0 68.17 800 848 936 1072 600 601 604 636 +hsync (63.6 kHz)
(**) fglrx(0): Default mode "800x600": 60.1 MHz (scaled from 0.0 MHz), 56.9 kHz, 90.0 Hz
(II) fglrx(0): Modeline "800x600"x90.0 60.06 800 840 928 1056 600 601 604 632 +hsync (56.9 kHz)
(**) fglrx(0): *Mode "720x480": 26.7 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "720x480"x60.0 26.71 720 736 808 896 480 481 484 497 +hsync (29.8 kHz)
(**) fglrx(0): *Mode "640x480": 36.0 MHz (scaled from 0.0 MHz), 43.3 kHz, 85.0 Hz
(II) fglrx(0): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 +hsync +vsync (43.3 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 +hsync +vsync (37.5 kHz)
(**) fglrx(0): Default mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.0 Hz
(II) fglrx(0): Modeline "640x480"x72.0 31.50 640 664 704 832 480 489 492 520 +hsync +vsync (37.9 kHz)
(**) fglrx(0): Default mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 +hsync +vsync (31.5 kHz)
(**) fglrx(0): Default mode "640x480": 52.4 MHz (scaled from 0.0 MHz), 61.8 kHz, 120.0 Hz
(II) fglrx(0): Modeline "640x480"x120.0 52.40 640 680 744 848 480 481 484 515 +hsync (61.8 kHz)
(**) fglrx(0): Default mode "640x480": 43.2 MHz (scaled from 0.0 MHz), 50.9 kHz, 100.0 Hz
(II) fglrx(0): Modeline "640x480"x100.0 43.16 640 680 744 848 480 481 484 509 +hsync (50.9 kHz)
(**) fglrx(0): Default mode "640x480": 37.9 MHz (scaled from 0.0 MHz), 45.5 kHz, 90.0 Hz
(II) fglrx(0): Modeline "640x480"x90.0 37.89 640 672 736 832 480 481 484 506 +hsync (45.5 kHz)
(**) fglrx(0): Default mode "640x400": 28.1 MHz (scaled from 0.0 MHz), 33.7 kHz, 75.0 Hz
(II) fglrx(0): Modeline "640x400"x75.0 28.07 640 696 736 832 400 413 415 449 (33.7 kHz)
(**) fglrx(0): Default mode "640x400": 24.9 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
(II) fglrx(0): Modeline "640x400"x60.0 24.92 640 664 760 792 400 460 462 525 (31.5 kHz)
(**) fglrx(0): Default mode "512x384": 19.7 MHz (scaled from 0.0 MHz), 31.1 kHz, 75.0 Hz
(II) fglrx(0): Modeline "512x384"x75.0 19.68 512 528 576 632 384 384 385 416 (31.1 kHz)
(**) fglrx(0): Default mode "512x384": 19.8 MHz (scaled from 0.0 MHz), 29.8 kHz, 60.0 Hz
(II) fglrx(0): Modeline "512x384"x60.0 19.81 512 544 624 664 384 451 453 497 (29.8 kHz)
(**) fglrx(0): Default mode "400x300": 24.8 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x75.0 24.75 400 408 448 528 300 601 602 625 doublescan (46.9 kHz)
(**) fglrx(0): Default mode "400x300": 22.3 MHz (scaled from 0.0 MHz), 45.0 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "400x300"x60.0 22.33 400 416 480 496 300 601 605 742 doublescan (45.0 kHz)
(**) fglrx(0): Default mode "320x240": 15.8 MHz (scaled from 0.0 MHz), 37.9 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x75.0 15.75 320 328 360 416 240 481 482 501 doublescan (37.9 kHz)
(**) fglrx(0): Default mode "320x240": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x240"x60.0 12.59 320 328 376 400 240 491 493 525 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 13.1 MHz (scaled from 0.0 MHz), 31.5 kHz, 75.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x75.0 13.10 320 352 368 416 200 406 407 417 doublescan (31.5 kHz)
(**) fglrx(0): Default mode "320x200": 12.6 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz (D)
(II) fglrx(0): Modeline "320x200"x60.0 12.59 320 336 384 400 200 457 459 524 doublescan (31.5 kHz)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.3
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"(II) Module "ramdac" already built-in
(==) fglrx(0): NoAccel = NO
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.2.0
ABI class: X.Org Video Driver, version 2.0
(==) fglrx(0): NoDRI = NO
(II) Loading sub module "fglrxdrm"
(II) LoadModule: "fglrxdrm"
(II) Reloading /usr/lib/xorg/modules/linux//libfglrxdrm.so
(==) fglrx(0): Capabilities: 0x00000000
(==) fglrx(0): CapabilitiesEx: 0x00000000
(==) fglrx(0): cpuFlags: 0x4000001f
(==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
(**) fglrx(0): ATI GART size: 255 MB
(II) fglrx(0): [pcie] 261120 kB allocated
(II) fglrx(0): [drm] DRM buffer queue setup: nbufs = 100 bufsize = 65536
(==) fglrx(0): UseFastTLS=0
(==) fglrx(0): BlockSignalsOnLock=1
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] 0 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b]
[1] 0 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b]
[2] -1 0 0x00100000 - 0x3fffffff (0x3ff00000) MX[b]E(B)
[3] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[4] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[5] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[6] -1 0 0xfdfff000 - 0xfdfff7ff (0x800) MX[b]
[7] -1 0 0xfe02a000 - 0xfe02afff (0x1000) MX[b]
[8] -1 0 0xfe02b000 - 0xfe02bfff (0x1000) MX[b]
[9] -1 0 0xfe02c000 - 0xfe02cfff (0x1000) MX[b]
[10] -1 0 0xfeb00000 - 0xfeb000ff (0x100) MX[b]
[11] -1 0 0xfe02f000 - 0xfe02ffff (0x1000) MX[b]
[12] -1 0 0xfdec0000 - 0xfdedffff (0x20000) MX[b](B)
[13] -1 0 0xfdef0000 - 0xfdefffff (0x10000) MX[b](B)
[14] -1 0 0xd0000000 - 0xdfffffff (0x10000000) MX[b](B)
[15] -1 0 0xfdee0000 - 0xfdeeffff (0x10000) MX[b](B)
[16] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[17] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[18] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[19] 0 0 0x00009c00 - 0x00009cff (0x100) IX[b]
[20] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[21] -1 0 0x00000000 - 0x000000ff (0x100) IX[b]
[22] -1 0 0x0000ac00 - 0x0000ac7f (0x80) IX[b]
[23] -1 0 0x0000bc00 - 0x0000bc07 (0x8) IX[b]
[24] -1 0 0x0000c000 - 0x0000c00f (0x10) IX[b]
[25] -1 0 0x00000b60 - 0x00000b63 (0x4) IX[b]
[26] -1 0 0x00000960 - 0x00000967 (0x8) IX[b]
[27] -1 0 0x00000be0 - 0x00000be3 (0x4) IX[b]
[28] -1 0 0x000009e0 - 0x000009e7 (0x8) IX[b]
[29] -1 0 0x0000d400 - 0x0000d40f (0x10) IX[b]
[30] -1 0 0x00000b70 - 0x00000b73 (0x4) IX[b]
[31] -1 0 0x00000970 - 0x00000977 (0x8) IX[b]
[32] -1 0 0x00000bf0 - 0x00000bf3 (0x4) IX[b]
[33] -1 0 0x000009f0 - 0x000009f7 (0x8) IX[b]
[34] -1 0 0x0000e800 - 0x0000e80f (0x10) IX[b]
[35] -1 0 0x00004c40 - 0x00004c7f (0x40) IX[b]
[36] -1 0 0x00004c00 - 0x00004c3f (0x40) IX[b]
[37] -1 0 0x0000fc00 - 0x0000fc1f (0x20) IX[b]
[38] -1 0 0x00009c00 - 0x00009cff (0x100) IX[b](B)
[39] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[40] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) fglrx(0): driver needs X.org 7.1.x.y with x.y >= 0.0
(II) fglrx(0): detected X.org 7.1.2.0
(II) Loading extension ATIFGLRXDRI
(II) fglrx(0): doing DRIScreenInit
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: Searching for BusID PCI:5:0:0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 7, (OK)
drmOpenByBusid: drmOpenMinor returns 7
drmOpenByBusid: drmGetBusid reports PCI:5:0:0
(II) [drm] DRM interface version 1.0
(II) [drm] DRM open master succeeded.
(II) fglrx(0): [drm] Using the DRM lock SAREA also for drawables.
(II) fglrx(0): [drm] framebuffer handle = 0xac000
(II) fglrx(0): [drm] added 1 reserved context for kernel
(II) fglrx(0): X context handle = 0x1
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
(II) fglrx(0): [drm] removed 1 reserved context for kernel
(II) fglrx(0): [drm] unmapping 8192 bytes of SAREA 0xab000 at 0xb7653000
(II) fglrx(0): [drm] Closed DRM master.
(WW) fglrx(0): ***********************************************
(WW) fglrx(0): * DRI initialization failed! *
(WW) fglrx(0): * (maybe driver kernel module missing or bad) *
(WW) fglrx(0): * 2D acceleraton available (MMIO) *
(WW) fglrx(0): * no 3D acceleration available *
(WW) fglrx(0): ********************************************* *
(II) fglrx(0): FBADPhys: 0xc0000000 FBMappedSize: 0x10000000
(==) fglrx(0): Write-combining range (0xd0000000,0x10000000)
(II) fglrx(0): FBMM initialized for area (0,0)-(1280,8191)
(II) fglrx(0): FBMM auto alloc for area (0,0)-(1280,1024) (front color buffer - assumption)
(II) fglrx(0): Largest offscreen area available: 1280 x 7167
(==) fglrx(0): Backing store disabled
(II) Loading extension FGLRXEXTENSION
(II) Loading extension ATITVOUT
(**) fglrx(0): DPMS enabled
(WW) fglrx(0): Textured Video not supported without DRI enabled.
(II) fglrx(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
Solid Horizontal and Vertical Lines
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) fglrx(0): Acceleration enabled
(II) LoadModule: "amdxmm"
(II) Loading /usr/lib/xorg/modules//amdxmm.so
(II) Module amdxmm: vendor="X.Org Foundation"
compiled for 7.1.0, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(EE) fglrx(0): XMM failed to open CMMQS connection.
(II) fglrx(0): XMM failed to initialize!
(WW) fglrx(0): Option "VendorName" is not used
(WW) fglrx(0): Option "ModelName" is not used
(II) fglrx(0): Direct rendering disabled
(==) fglrx(0): Silken mouse enabled
(==) fglrx(0): Using hardware cursor
(==) RandR enabled
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-APPGROUP
(II) Initializing built-in extension XAccessControlExtension
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension XFree86-Bigfont
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) Initializing built-in extension XEVIE
(II) AIGLX: Screen 0 is not DRI capable
(II) Loading sub module "GLcore"
(II) LoadModule: "GLcore"
(II) Loading /usr/lib/xorg/modules/extensions//libGLcore.so
(II) Module GLcore: vendor="X.Org Foundation"
compiled for 1.4.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 0.3
(II) GLX: Initialized MESA-PROXY GL provider for screen 0
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "abnt2"
(**) Keyboard0: XkbModel: "abnt2"
(**) Option "XkbLayout" "br"
(**) Keyboard0: XkbLayout: "br"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(**) Option "Protocol" "auto"
(**) PS/2 Mouse: Device: "/dev/psaux"
(**) PS/2 Mouse: Protocol: "auto"
(**) Option "SendCoreEvents" "true"
(**) Option "CorePointer"
(**) PS/2 Mouse: always reports core events
(**) Option "Device" "/dev/psaux"
(**) Option "Emulate3Buttons" "true"
(**) Option "Emulate3Timeout" "70"
(**) PS/2 Mouse: Emulate3Buttons, Emulate3Timeout: 70
(**) Option "ZAxisMapping" "4 5"
(**) PS/2 Mouse: ZAxisMapping: buttons 4 and 5
(**) PS/2 Mouse: Buttons: 9
(**) PS/2 Mouse: Sensitivity: 1
(II) evaluating device (PS/2 Mouse)
(II) XINPUT: Adding extended input device "PS/2 Mouse" (type: MOUSE)
(II) evaluating device (Keyboard0)
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(--) PS/2 Mouse: PnP-detected protocol: "ExplorerPS/2"
(II) PS/2 Mouse: ps2EnableDataReporting: succeeded
Last edited by DarkForte (2008-06-23 22:40:05)

From your Xorg.0.log:
(II) fglrx(0): DRIScreenInit done
(II) fglrx(0): Kernel Module Version Information:
(II) fglrx(0): Name: fglrx
(II) fglrx(0): Version: 8.49.7
(II) fglrx(0): Date: May 12 2008
(II) fglrx(0): Desc: ATI FireGL DRM kernel module
(WW) fglrx(0): Kernel Module version does *not* match driver.
(EE) fglrx(0): incompatible kernel module detected - HW accelerated OpenGL will not work
You have to quit X, then rmmod and modprobe the kernel module - you're still using the old one. (a reboot would technically fix it too)
# rmmod fglrx
# modprobe fglrx
# dmesg | tail
The dmesg output should say you've successfully loaded the 8.501 driver.

[solved] mouse and keyboard not working (and previous fix wont work)

i made a clean default setup with
arch
latest kernel - 2.6.29 i think
xorg 1.6.1
video-intel-legacy
on a 865G intel box + tried usb and ps2 keyboards + usb mouse
when i start X the mouse and keyboard dont work (and i have to hard reset the box) in all of the setups i tried. the AutoAddDevices fix suggested before does not work this time
- without xorg.conf
- with auto-generated xorg.conf (X -confogure)
- with the automatic conf +
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with tiny xorg.conf containing only
Section "ServerFlags"
Option "AutoAddDevices" "False"
EndSection
- with dbus/hal enabled and disabled in rc.conf
how i make it work
Last edited by ash (2009-04-30 19:01:41)

the setup that works to me now is
automatic xorg.conf with the AutAddDevices False (disable hotplug) lines
dbus and hal enabled in deamons
this lines instruct xorg to use xf86-input-mouse/keyboard instead of evdev. ie it looks like with evdev there is no point in xf86-input-mouse/keyboard
Last edited by ash (2009-04-30 18:26:16)

[SOLVED] OSCDIMG Tool Does Not Work on Windows 10? ReadFile() fails with error code 87. (The parameter is incorrect) on ReFS Storage Space Mirror

Hello,
What could be the reason of OSCDIMG premastering tool not working in Windows 10?
I'm trying to rebuild ISO from the admin setup point and having problems with OSCDIMG failing to read files from the master folder:
E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\etfsboot.com"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER test.iso
OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
Copyright (C) Microsoft, 1993-2012. All rights reserved.
Licensed only for producing Microsoft authorized content.
Scanning source tree (500 files in 15 directories)
Scanning source tree complete (950 files in 95 directories)
Computing directory information complete
Image file is 3591864320 bytes (before optimization)
Writing 950 files in 95 directories to test.iso
0% complete
ReadFile failed (\\?\E:\Images\ISOFOLDER\autorun.inf, off=0 len=800 status=103)
Error 87: The parameter is incorrect.
Thank you.
Well this is the world we live in And these are the hands we're given...

Figured it myself.
For some reason, the tool does NOT support source locations on ReFS formatted drives. Move the D:\ISOFOLDER location to NTFS formatted drive, and the tool works flawless:
E:\Images>bin\oscdimg.exe -bootdata:2#p0,e,b"D:\ISOFOLDER\boot\etfsboot.com"#pEF,e,b"D:\ISOFOLDER\efi\Microsoft\boot\efisys.bin" -o -h -m -u2 -udfver102 -lwinsetup D:\ISOFOLDER D:\TEMP\test.iso
OSCDIMG 2.56 CD-ROM and DVD-ROM Premastering Utility
Copyright (C) Microsoft, 1993-2012. All rights reserved.
Licensed only for producing Microsoft authorized content.
Scanning source tree (500 files in 15 directories)
Scanning source tree complete (950 files in 95 directories)
Computing directory information complete
Image file is 3591864320 bytes (before optimization)
Writing 950 files in 95 directories to D:\TEMP\test.iso
100% complete
Storage optimization saved 45 files, 16310272 bytes (1% of image)
After optimization, image file is 3577761792 bytes
Space saved because of embedding, sparseness or optimization = 16310272
Done
Well this is the world we live in And these are the hands we're given...

[solved] LibreOffice spellchecker does not work, version 3.4.2

It's kind of a stupid question, but I do not know how I can debug this. The spell checker exits immediately after "Tools/Spelling and Grammar…" though there are incorrect words, "AutoSpellCheck" also underlines nothing. I set language in the status bar to "English", "Russian", "Ukrainian" — none worked. I have "Russian Dictionaries 0.6" and "Ukrainian spelling dictionary and thesaurus 1.6.0" in "Tools/Extension Manager…" (no English dictionary, strange). I have these packages installed:
$ pacman -Q | grep -E "libreoffice|hunspell|mythes|hyphen"
hunspell 1.2.15-1
hunspell-en 7.1-1
hunspell-ru 0.99g5-4
hunspell-uk 1.6.1-1
hyphen 2.7.1-2
hyphen-en 2.7.1-2
hyphen-ru 0.1-2
hyphen-uk 0.1-1
libmythes 1.2.1-1
libreoffice-calc 3.4.2-2
libreoffice-common 3.4.2-2
libreoffice-en-GB 3.4.2-1
libreoffice-extension-ct2n 3.4.2-2
libreoffice-extension-diagram 3.4.2-2
libreoffice-extension-google-docs 3.4.2-2
libreoffice-extension-hunart 3.4.2-2
libreoffice-extension-nlpsolver 3.4.2-2
libreoffice-extension-numbertext 3.4.2-2
libreoffice-extension-oooblogger 3.4.2-2
libreoffice-extension-pdfimport 3.4.2-2
libreoffice-extension-presentation-minimizer 3.4.2-2
libreoffice-extension-presenter-screen 3.4.2-2
libreoffice-extension-report-builder 3.4.2-2
libreoffice-extension-scripting-beanshell 3.4.2-2
libreoffice-extension-scripting-javascript 3.4.2-2
libreoffice-extension-scripting-python 3.4.2-2
libreoffice-extension-typo 3.4.2-2
libreoffice-extension-validator 3.4.2-2
libreoffice-extension-watch-window 3.4.2-2
libreoffice-extension-wiki-publisher 3.4.2-2
libreoffice-gnome 3.4.2-2
libreoffice-writer 3.4.2-2
mythes-en 20060306-1
mythes-ru 0.1-2
mythes-uk 0.1-2
I thought that I missed some package due to splitting, then I installed "libreoffice-extensions". I also tried to downgrade to "libreoffice-3.4.1-1" (non-split) (I have no older packages).
Last edited by beroal (2011-08-20 18:34:32)

Baryon wrote:The only way I could get spellchecking to work was by manually installing a dictionary extension from the OpenOffice extensions site
Thanks for your reply, but this does not work either.
I noticed that "Tools/Options/Language Settings/Writing Aids/Available Language Modules" is empty, i.e. libreoffice does not see hunspell.
$ ls /usr/lib/libreoffice/basis3.4/program | grep -E "lnth|hyphen|spell"
libhyphenlx.so
liblnthlx.so
libspelllx.so
$ ls -d /usr/lib/*spell*
/usr/lib/aspell /usr/lib/libaspell.so.15 /usr/lib/libgtkspell.so    /usr/lib/libhunspell-1.2.so /usr/lib/libpspell.so
/usr/lib/aspell-0.60 /usr/lib/libaspell.so.15.1.5 /usr/lib/libgtkspell.so.0    /usr/lib/libhunspell-1.2.so.0 /usr/lib/libpspell.so.15
/usr/lib/libaspell.so /usr/lib/libgtkspell.a    /usr/lib/libgtkspell.so.0.0.0 /usr/lib/libhunspell-1.2.so.0.0.0 /usr/lib/libpspell.so.15.1.5
$ pacman -Q libreoffice-common
libreoffice-common 3.4.2-2
$ pacman -Q libreoffice-writer
libreoffice-writer 3.4.2-2
$ pacman -Q hunspell
hunspell 1.2.15-1
I deleted ~/.config/.libreoffice .
Last edited by beroal (2011-08-20 17:58:01)

[Solved] mpd --create-db not working

Similar Messages

Maybe you are looking for