[SOLVED]mplayer-plugin not in repos?

Hi,
Does anyone know, what happened to the mplayer-plugin package. It used to be in /extra... Are there problems with stability?
Thanks.
Last edited by Leonid.I (2009-11-07 00:04:44)

http://bbs.archlinux.org/viewtopic.php?id=83825

Similar Messages

[solved] Mplayer-plugin downloads files

Whenever I play an avi with mplayer-plugin, it gets downloaded to my homedir. There's nothing wrong with playback, everything still works, but I wonder why the file is in my homedir. :S I also have to remove the file manually.
Could it have something to do with caching?
I'm also having problems with some streams. They say 'buffering' and then it just stops. When I look into my homedir, sure enough there's a file named playlist (because it's a stream) but it doesn't play.

That worked. Thanks.

[solved ]Gedit plugins not working (python module missing)

What's the problem with python gedit plugins? None of them works, all I get is this:
Could not find platform independent libraries <prefix>
Could not find platform dependent libraries <exec_prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
** (gedit:8017): WARNING **: Could not import pygtk
Traceback (most recent call last):
File "/opt/gnome/lib/gedit-2/plugins/terminal.py", line 23, in ?
import gedit
ImportError: No module named gedit
** (gedit:8017): WARNING **: Could not load python module terminal
** (gedit:8017): WARNING **: Error, impossible to activate plugin 'Embedded Terminal'
I've added all imaginable paths to PYTHONHOME and PYTHONPATH and I have pygtk installed. I could not find that gedit module anywhere either. What should I do?
edit: solved by installing newest gedit from testing (2.18.0)
Last edited by mikoro (2007-03-27 17:24:34)

Mar2zz wrote:
I am using Gnome indeed. I have the following items under Edit:
- Undo
- Redo
- Cut
- Copy
- Paste
- Remove (or delete, translating from Dutch)
- Select all
- Insert date and time
That's it...
Ok, try my suggestion: click on the Gedit icon in the top bar. It might be in there. That's where GNOME is starting to put all of the application-wide (as opposed to instance-specific) menu entries.
Last edited by jakobcreutzfeldt (2013-07-05 15:45:59)

[SOLVED] Vim plugins not working

Hello,
I have a problem with vim installation on my arch system.
Vim by itself runs without any problems, but when I try to install plugins it starts to fail.
With nerdtree installed everytime I try to open a file I get
Error detected while processing /usr/share/vim/vimfiles/nerdtree_plugin/exec_menuitem.vim:
line 18:
E15: Invalid expression:
Press ENTER or type command to continue
Error detected while processing /usr/share/vim/vimfiles/nerdtree_plugin/exec_menuitem.vim:
line 18:
E116: Invalid arguments for function NERDTreeAddMenuItem
Press ENTER or type command to continue
Error detected while processing /usr/share/vim/vimfiles/nerdtree_plugin/exec_menuitem.vim:
line 19:
E10: \ should be followed by /, ? or &
Press ENTER or type command to continue
Error detected while processing /usr/share/vim/vimfiles/nerdtree_plugin/exec_menuitem.vim:
line 20:
E10: \ should be followed by /, ? or &
Press ENTER or type command to continue
Error detected while processing /usr/share/vim/vimfiles/nerdtree_plugin/exec_menuitem.vim:
line 21:
E10: \ should be followed by /, ? or &
Press ENTER or type command to continue
Error detected while processing /usr/share/vim/vimfiles/nerdtree_plugin/exec_menuitem.vim:
line 22:
E10: \ should be followed by /, ? or &
package versions:
vim 7.4.274-1
vim-nerdtree 4.2.0-3
Thanks for the help
ongy
Last edited by ongy (2014-05-24 11:36:18)

I am pretty sure something must be non standard, since I didn't expect it to break on standard on arch.
I have tried gvim package because it has python support (I wanted to try youcompleteme), but I have the problem with both, the vim and gvim package from the official repositories
I looked with the
:version
command for whether the normal vim package supports python and later again with gvim package, since that changed from switching packages I am pretty sure I use the version from the package.
Do you know any more files that could be the problem?
Last edited by ongy (2014-05-24 08:53:09)

[SOLVED]mplayer and mplayer-plugin

I have been trying to install mplayer and mplayer-plugin for several days from several mirrors in the USA. this is the error message I keep receiving:
error: failed retrieving file 'smbclient-3.2.5-1-i686.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
error: failed retrieving file 'mplayer-1.0rc2-8-i686.pkg.tar.gz' from mirror.cs.vt.edu : File unavailable (e.g., file not found, no access)
warning: failed to retrieve some files from extra
error: failed to commit transaction (unexpected error)
Errors occurred, no packages were upgraded.
Anyone else having this issue?
THANKS!!!
Last edited by cphase (2008-12-16 22:31:16)

Update your pacman database (pacman -Sy) or really force it to update (pacman -Syy). The packages you are trying to download are not the latest versions

Watching CNN and Yahoo videos with mplayer-plugin [SOLVED]

I had a hell of a time trying to view CNN videos (http://www.cnn.com) and Yahoo videos with mplayer-plugin (firefox) and didn't seem to find any solutions in a forum search.
The following worked for me:
To get it working at all, I had to edit /etc/mplayerplug-in.conf and add/edit the following options:
noembed=1
To get smooth video and sound without choppy playback, I had to add/edit the following options to /etc/mplayerplug-in.conf:
cachesize = 1024
These value for cachesize will obviously vary depending on your internet connection. But, with my DSL/broadband connection, the default cachesize of 512 was for some reason resulting in *very* choppy playback. The cachsize of 1024 fixed everything.
I can now view CNN and Yahoo videos with no problem.
Just thought I'd share if anyone is having similar problems.

Thanks

'claws-mail-extra-plugins': not found in sync db [ Solved ]

[wesley@ratdog ~]$ sudo pacman -Syu
Password:
:: Synchronizing package databases...
downloading testing.db.tar.gz...
downloading core.db.tar.gz...
downloading extra.db.tar.gz...
downloading community-testing.db.tar.gz...
downloading community.db.tar.gz...
archlinuxfr is up to date
archrepo is up to date
compiz-fusion is up to date
arch-games is up to date
:: Starting full system upgrade...
warning: python-gdata: local (2.0.6-1) is newer than archrepo (2.0.4-1)
local database is up to date
[wesley@ratdog ~]$ sudo pacman -S claws-mail-extra-plugins
claws-mail-extra-plugins package not found, searching for group...
error: 'claws-mail-extra-plugins': not found in sync db
[wesley@ratdog ~]$ sudo pacman -Q claws-mail-extra-plugins
error: package "claws-mail-extra-plugins" not found
[wesley@ratdog ~]$ sudo pacman -Q claws-mail
claws-mail 3.7.4-1
[wesley@ratdog ~]$ sudo pacman -Q claws-mail
claws-mail 3.7.4-1
[wesley@ratdog ~]$
Did I clobber my mirrorlist ?
http://dpaste.com/153358/
Last edited by wesley_of_course (2010-02-01 20:49:53)

[wesley@ratdog ~]$ sudo pacman -Syu
:: Synchronizing package databases...
testing is up to date
core is up to date
extra is up to date
community-testing is up to date
community is up to date
archlinuxfr is up to date
archrepo is up to date
compiz-fusion is up to date
arch-games is up to date
:: Starting full system upgrade...
local database is up to date
It 's fixed , ran reflector.

Getting mplayer-plugin to work with opera 9

according to
http://my.opera.com/community/forums/to … ?id=131761
mplayer-plugin needs to be compiled with --enable-x so it works with opera9. i hope the maintainer updates the package in the repos!

i tried to compile mplayer-plugin from ABS, with --enable-x option, but i get this:
$ makepkg
==> Entering fakeroot environment
==> Making package: mplayer-plugin 3.25-2 (Thu Jun 22 17:49:11 PHT 2006)
==> Checking Runtime Dependencies...
==> Checking Buildtime Dependencies...
==> Retrieving Sources...
==> Found mplayerplug-in-3.25.tar.gz in build dir
==> Found mplayerplug-in.conf in build dir
==> Validating source files with MD5sums
mplayerplug-in-3.25.tar.gz ... Passed
mplayerplug-in.conf ... Passed
==> Extracting Sources...
==> tar --use-compress-program=gzip -xf mplayerplug-in-3.25.tar.gz
==> Removing existing pkg/ directory...
==> Starting build()...
checking for g++... g++
checking for C++ compiler default output file name... a.out
checking whether the C++ compiler works... yes
checking whether we are cross compiling... no
checking for suffix of executables...
checking for suffix of object files... o
checking whether we are using the GNU C++ compiler... yes
checking whether g++ accepts -g... yes
checking for gcc... gcc
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
checking for gcc option to accept ANSI C... none needed
checking for a BSD-compatible install... /bin/install -c
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
configure: Determining mozilla/firefox packages to link against
checking for pkg-config... no
*** The pkg-config script could not be found. Make sure it is
*** in your path, or set the PKG_CONFIG environment variable
*** to the full path to pkg-config.
*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.
configure: WARNING: xulrunner-plugin not found
*** The pkg-config script could not be found. Make sure it is
*** in your path, or set the PKG_CONFIG environment variable
*** to the full path to pkg-config.
*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.
configure: WARNING: firefox-plugin not found
*** The pkg-config script could not be found. Make sure it is
*** in your path, or set the PKG_CONFIG environment variable
*** to the full path to pkg-config.
*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.
configure: WARNING: seamonkey-plugin not found
*** The pkg-config script could not be found. Make sure it is
*** in your path, or set the PKG_CONFIG environment variable
*** to the full path to pkg-config.
*** Or see http://www.freedesktop.org/software/pkgconfig to get pkg-config.
configure: WARNING: xulrunner-plugin not found
configure: error: Unable to find mozilla or firefox development files
make: *** No targets specified and no makefile found. Stop.
==> ERROR: Build Failed. Aborting...
anyone help?

Using OSX 10.8 DW CS6 when I click "live" it says "flash plugin" "not found".

Using DW CS6 when I click "live" it says "Flash Plugin was not found. To view Flash content in Live View install the Firefox Flash Plugin from www.adobe.com."
My default browser is Chrome. DW uses Chrome as the primary browser. (FFox is secondary.)
I do have Firefox and do not have Flash on it. I open Flash content Chrome, and I installed an HTML5 video viewer add-on in FFox (but haven't tried it yet).
I also have the Dreamweaver HTML5 Video View add-on, so why am I getting that message? Furthermore, the HTML code doesn't have any Flash objects. (The code is the source HTML from www.google.com page, without any changes.)
How do I make DW display the "Live" view of the code without giving me an error? (My end goal is to find out what google does when you enter something in the search box and hit the Enter key, actually, I'd like to see why the result of the search is displayed the way it is - default should be Web view, but Image view shows instead. I want Web to show!)

"Why would anybody paste Google's source code into their own web page?" To learn from it.
I'm sorry Phil, but you can't learn much from Google's source code because search engines are dynamically programed with behind-the-scenes code and content from databases that you can't see. You're just spinning your wheels here. If you want to learn how to make a search engine, I'd be happy to point you to some relevant PHP & MySql tutorials.
The issue still remains that DW is giving me the error (flash plugin not found)
When DW starts acting weird, the first thing to try is Deleting Corrupted Cache in DW
http://forums.adobe.com/thread/494811
If that doesn't help, try Restore Preferences
http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html
If all else fails, use the CC Cleaner Tools below followed by a software re-install.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Nancy O.

Mplayer-plugin - anyone can use it?

Could you tell me how to use mplayer-plugin?
Or could you point me to any documentation?
This is example site with movies:
http://www.galaxydynamics.org/cosmic_cruise.html
When I click on avi this plugin just blocks firefox.

The keyboard controls aren't working for me while the video is embedded. If you use the 'noembed=1' option in ~/.mplayer/mplayerplug-in.conf, the video will launch in it's own window and the regular Mplayer controls will work.
As far as the cache goes, it looks like it starts over when the video is stopped then restarted. I'm not sure if this is editable or not.
What do you mean when you say it looks poopy?
Last edited by skottish (2008-03-01 20:32:49)

Solman_setup - Managed System Configuration - ST-PI plugin not up-to-date

Hi,
I have a problem with configuring managed systems in Solution manager using txn solman_setup. When I select the managed system, enter all the data for the READ destination, TMW destination and Back destination and click "Maintain Connection" the system comes back with message:
ST-PI Plugin not up-to-date for managed system IVE, see note 1274287
When I check the OSS note and my managed system I see that my managed system is already on the right required level for SAP Solution Tools Plug-In which is: ST-PI 2008_1_700.
I did check also for service packs but these do not yet exist.
Can someone help me with this issue?
Next list shows current version of the managed systems:
SAP ECC 6.0
SAP ABA 700 Sp 13
SAP Basis 700 SP13
St-PI 2008_1_700 SP 0
PI-Basis 2005_1_700 SP 13
SAP BW 700 SP 15
SAP AP 700 SP9
ST-A/PI 01l_ECC600 SP 0

I did finally resolve my problem with input from OS which is listed below.
You're using the latest version of ST-PI. There's no patch levels
available to download in this moment. To solve this issue I ask you to
first apply the latest version of this note below. Please, read
carefully step by step this note below and follow all the procedures.
Number 1172948
Short text SAP Solution Manager - Basic functions
After you applied the central note, I ask you to apply these notes belowWhen you had all these notes applied, this issue will be solved.
Number 1274287
Short text End-to-End Diagnostics SP18
Number 1244225
Short text Solution Manager 7.0 EhP 1: recommended
corrections
Please, apply the latest patch level for lmservice too.

I get the "Fast Browser Plugin not loaded" message every time i run safari and I can't find an MTWB folder anywhere on my hard drive?

I get the "Fast Browser Plugin not loaded" message every time I run Safari and I can't find an MTWB folder anywhere on my hard drive? This doesn't seem to be causing a problem, but is a puzzle?

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. All it does is to collect information about the state of the computer. That information goes nowhere unless you choose to share it. However, you should be cautious about running any kind of program (not just a shell script) at the request of a stranger on a public message board. If you have doubts, search this site for other discussions in which this procedure has been followed without any report of ill effects. If you can't satisfy yourself that the instructions are safe, don't follow them. Ask for other options.
Here's a summary of what you need to do, if you choose to proceed: Copy a line of text from this web page into the window of another application. Wait for the script to run. It usually takes a few minutes. Then paste the results, which will have been copied automatically, back into a reply on this page. The sequence is: copy, paste, wait, paste again. Details follow.
4. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
5. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
6. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin; clear; Fb='%s\n\t(%s)\n'; Fm='\n%s\n\n%s\n'; Fr='\nRAM details\n%s\n'; Fs='\n%s: %s\n'; Fu='user %s%%, system %s%%'; AC="com.autodesk.AutoCAD com.google.GoogleDrive"; H='^[[:space:]]*((127\.0\.0\.1|::1|fe80::1%lo0)[[:space:]]+local|(255\.){3}255[[:space:]]*broadcast)host[[:space:]]*$'; NS=networksetup; PB="/usr/libexec/PlistBuddy -c Print"; A () { [[ a -eq 0 ]]; }; M () { find -L "$d" -type f | while read f; do file -b "$f" | egrep -lq XML\|exec && echo $f; done; }; AT () { o=`file -b "$1" | egrep -v '^(A.{16}t$|cann)'`; Ps "${1##*/} format"; }; Pc () { o=`grep -v '^ *#' "$2"`; l=`wc -l <<< "$o"`; [[ l -gt 25 ]] && o=`head -n25 <<< "$o"`$'\n'"[$((l-25)) more line(s)]"; Pm "$1"; AT "$1"; }; Pm () { [[ "$o" ]] && o=`sed -E '/^ *$/d;s/^ */ /;s/[-0-9A-Fa-f]{22,}/UUID/g;s/(ochat)\.[^.]+(\..+)/\1\2/;/Shared/!s/(\/Users\/)[^/]+/\1-/g' <<< "$o"` && printf "$Fm" "$1" "$o"; }; Pp () { o=`$PB "$2" | awk -F'= ' \/$3'/{print $2}'`; Pm "$1"; }; Ps () { o=`echo $o`; [[ ! "$o" =~ ^0?$ ]] && printf "$Fs" "$1" "$o"; }; R () { o=; [[ r -eq 0 ]]; }; SP () { system_profiler SP${1}DataType; }; id -G | grep -qw 80; a=$?; A && sudo true; r=$?; t=`date +%s`; clear; { A || echo $'No admin access\n'; A && ! R && echo $'No root access\n'; SP Software | sed -n 's/^ *//;5p;6p;8p'; h=(`SP Hardware | awk '/ Id/{print $3}; /Mem/{print $2}'`); o=$h; Ps "Model"; o=$((h[1]<4?h[1]:0)); Ps "Total RAM (GB)"; o=`SP Memory | sed '1,5d;/[my].*:/d'`; [[ "$o" =~ s:\ [^O]|x([^08]|0[^2]|8[^0]) ]] && printf "$Fr" "$o"; o=`SP Diagnostics | sed '5,6!d'`; [[ "$o" =~ Pass ]] || Pm "POST"; p=`SP Power`; o=`awk '/Cy/{print $NF}' <<< "$p"`; o=$((o>=300?o:0)); Ps "Battery cycles"; o=`sed -n '/Cond.*: [^N]/{s/^.*://p;}' <<< "$p"`; Ps "Battery condition"; for b in FireWire Thunderbolt USB; do o=`SP $b | sed -En '/:$/{s/ *:$//;x;s/\n//;s/\n.*//;/\)/p;};/^ *(V.+ [0N]|Man).+ /{s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};/Apple|Genesy|Intel|SMSC/{s/.//g;h;}'`; Pm $b; done; o=`pmset -g therm | sed 's/^.*C/C/'`; [[ "$o" =~ No\ th|pms ]] && o=; Pm "Thermal conditions"; o=`pmset -g sysload | grep -v :`; [[ "$o" =~ =\ [^GO] ]] || o=; Pm "System load advisory"; o=`nvram boot-args | awk '{$1=""; print}'`; Ps "boot-args"; fdesetup status | grep -q On && o=on || o=; Ps "FileVault"; a=(/ ""); A=(System User); for i in 0 1; do o=`cd ${a[$i]}L*/Lo*/Diag* || continue; for f in *.{cr,h,pa,s}*; do [[ -f "$f" ]] || continue; d=$(stat -f%Sc -t%F "$f"); [[ "$f" =~ h$ ]] && grep -lq "^Thread c" "$f" && f="$f *"; echo "$d ${f%%_2*} ${f##*.}"; done | sort | tail`; Pm "${A[$i]} diagnostics"; done; grep -lq '*$' <<< "$o" && printf $'\n\t* Code injection\n'; o=`syslog -F bsd -k Sender kernel -k Message CReq 'caug|GPU |hfs: Ru|last value [1-9]|n Cause: -|NVDA\(|pagin|proc: t|Roamed|rror|ssert|Thrott|timed? ?o|WARN' -k Message Ane 'SMC:' | tail -n25 | awk '/:/{$4=""; $5=""};1'`; Pm "Kernel messages"; o=`df -m / | awk 'NR==2 {print $4}'`; o=$((o<5120?o:0)); Ps "Free space (MiB)"; o=$(($(vm_stat | awk '/eo/{sub("\\.",""); print $2}')/256)); o=$((o>=1024?o:0)); Ps "Pageouts (MiB)"; s=( `sar -u 1 10 | sed '$!d'` ); [[ s[4] -lt 85 ]] && o=`printf "$Fu" ${s[1]} ${s[3]}` || o=; Ps "Total CPU usage" && { s=(`ps acrx -o comm,ruid,%cpu | sed '2!d'`); n=$((${#s[*]}-1)); c="${s[*]}"; o=${s[$n]}%; Ps "CPU usage by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; }; s=(`top -R -l1 -n1 -o prt -stats command,uid,prt | sed '$!d'`); n=$((${#s[*]}-1)); s[$n]=${s[$n]%[+-]}; c="${s[*]}"; o=$((s[$n]>=25000?s[$n]:0)); Ps "Mach ports used by process \"${c% ${s[$((n-1))]}*}\" with UID ${s[$((n-1))]}"; o=`kextstat -kl | grep -v com\\.apple | cut -c53- | cut -d\< -f1`; Pm "Loaded extrinsic kernel extensions"; R && o=`sudo launchctl list | awk 'NR>1 && !/0x|com\.(apple|openssh|vix\.cron)|org\.(amav|apac|calendarse|cups|dove|isc|ntp|openld|post[fg]|x)/{print $3}'`; Pm "Extrinsic daemons"; o=`launchctl list | awk 'NR>1 && !/0x|com\.apple|org\.(x|openbsd)|\.[0-9]+$/{print $3}'`; Pm "Extrinsic agents"; o=`for d in {/,}L*/Lau*; do M; done | egrep -v 'com\.apple\.(CSConfig|server)' | while read f; do ID=$($PB\ :Label "$f") || ID="No job label"; printf "$Fb" "$f" "$ID"; done`; Pm "launchd items"; o=`for d in /{S*/,}L*/StartupItems; do M; done`; Pm "Startup items"; sys=`pkgutil --regexp --only-files --files com.apple.pkg.* | sort | uniq | sed 's:^:/:'`; b=`sed -E '/^.+Lib.+\/Contents\/Info.plist$/!d;s/\/Info.plist$//;/Contents\/./d' <<< "$sys"`; l=`egrep '^/usr/lib/.+dylib$' <<< "$sys"`; [[ "$b" && "$l" ]] && { o=`find -L /S*/L*/{C*/Sec*A,E}* {/,}L*/{A*d,Compon,Ex,In,iTu,Keyb,Mail/B,P*P,Qu*T,Scripti,Sec,Servi,Spo}* -type d -name Contents -prune | grep -Fv "$b" | while read d; do test -f "$d/Info.plist" || continue; ID=$($PB\ :CFBundleIdentifier "$_") || ID="No bundle ID"; printf "$Fb" "${d%/Contents}" "$ID"; done`; Pm "Extrinsic loadable bundles"; o=`find /usr/lib -type f -name *.dylib | grep -Fv "$l"`; Pm "Extrinsic shared libraries"; :; } || echo $'\nReceipts missing'; o=`for e in INSERT_LIBRARIES LIBRARY_PATH; do launchctl getenv DYLD_$e; done`; Pm "Inserted dylibs"; o=`find -L {,/u*/lo*}/e*/periodic -type f -mtime -10d`; Pm "Modified periodic scripts"; o=`scutil --proxy | grep Prox`; Pm "Proxies"; o=`scutil --dns | awk '/r\[0\] /{if ($NF !~ /^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./) print $NF; exit}'`; i=`route -n get default | awk '/e:/{print $2}'`; I=`$NS -listnetworkserviceorder | sed -En '/ '$i'\)$/{x;s/^$.+$ //p;q;};x'`; n=`$NS -getdnsservers "$I" | awk '!/^T/{printf "not "; exit}'`; Ps "DNS (${n}from DHCP)"; o=`$NS -getinfo "$I" | awk '/k:/{if ($3 !~ "(255\.){3}0") print $3}'`; Ps "Netmask"; R && o=`sudo profiles -P | grep : | wc -l`; Ps "Profiles"; f=auto_master; [[ `md5 -q /etc/$f` =~ ^b166 ]] || Pc $f /etc/$f; for f in fstab sysctl.conf crontab launchd.conf; do Pc $f /etc/$f; done; f=/etc/hosts; Pc "hosts" <(egrep -v "$H" $f ); AT $f; Pc "User launchd" ~/.launchd*; R && Pc "Root crontab" <(sudo crontab -l); Pc "User crontab" <(crontab -l); R && o=`sudo defaults read com.apple.loginwindow LoginHook`; Pm "Login hook"; LD="$(`find /S*/*/F* -type f -name lsregister | head -n1` -dump)"; o=`for ID in $AC; do [[ "$LD" =~ $ID ]] && echo $ID; done`; Pm "Application check"; Pp "Global login items" /L*/P*/loginw* Path; Pp "User login items" L*/P*/*loginit* Name; Pp "Safari extensions" L*/Saf*/*/E*.plist Bundle | sed -E 's/(\..*$|-[1-9])//g'; o=`find ~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $ | wc -l`; Ps "Restricted user files"; cd; o=`SP Fonts | egrep 'id: N|te: Y' | wc -l`; Ps "Font problems"; o=`find L*/{Con,Pref}* -type f ! -size 0 -name *.plist | while read f; do plutil -s "$f" >&- || echo $f; done`; Pm "Bad plists"; d=(Desktop L*/Keyc*); n=(20 7); for i in 0 1; do o=`find "${d[$i]}" -type f -maxdepth 1 | wc -l`; o=$((o<=n[$i]?0:o)); Ps "${d[$i]##*/} file count"; done; o=; [[ UID -eq 0 ]] && o=root; Ps "UID"; o=$((`date +%s`-t)); Ps "Elapsed time (s)"; } 2>/dev/null | pbcopy; exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
7. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Click anywhere in the Terminal window and paste (command-V). The text you pasted should vanish immediately. If it doesn't, press the return key.
8. If you see an error message in the Terminal window such as "syntax error," enter
exec bash
and press return. Then paste the script again.
9. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
10. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report the results. No harm will be done.
11. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
12. When you post the results, you might see the message, "You have included content in your post that is not permitted." It means that the forum software has misidentified something in the post as a violation of the rules. If that happens, please post the test results on Pastebin, then post a link here to the page you created.
Note: This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Terms of Use of the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Mplayer-plugin config file errors?

i see in the /etc/mplayer-plugin.conf file entries like this:
# Enable Real Media Support *
#enable-real=[0|1]
enable=1
# Enable Windows Media Support *
#enable-wm=[0|1]
enable=1
maybe that's correct for some reason, but it seemed to me it should say enable-rm=1, enable-wm=1, etc. :?:
as a background/side note: i was trying to stop mplayer-plugin from taking over shoutcast pls streams from xmms, without success. for the moment i've just moved the mplayer-plugin.so file from the mozilla plugins directory, and so far that's working. removing the mime type from the ~/.mozilla/firefox/pluginreg.dat file didn't work, it just got replaced everytime i relaunched the browser, of course. i'm not sure what consquences removing the .so file will have -- so far everything else seems to work -- but if anyone knows a real fix, i'd appreciate it.
***oops, i just noticed, wrong forum. could the mods move it? thx

no, stupid windoze-mentality kindergarten firefox doesn't allow adding of new mime types or helpers. you can only remove or change existing ones.

How to use mplayer-plugin?

How do you use mplayer-plugin in Firefox?
I always just have empty mplayer window or area, when I click "play" I just see "stopped".
I have exactly same effect on two different computers with Arch.
Do I need some special configuration for mplayer-plugin?
What is so special in this plugin that it can't work just by default?

Jacek Poplawski wrote:How do you use mplayer-plugin in Firefox?
I always just have empty mplayer window or area, when I click "play" I just see "stopped".
I have exactly same effect on two different computers with Arch.
Do I need some special configuration for mplayer-plugin?
What is so special in this plugin that it can't work just by default?
It should just work after installing Mplayer and the plugin. If you launch Firefox from a terminal, are you seeing any errors?

Mplayer-plugin

I have a problem with mplayer-plugin If I try to view apple trialers or streaming stuff firefox locks up ...
Is there any way I can trace the problem (in a term maybe!) ?

try moving ~/.mplayer/mplayerplug-in.conf out of the way. the defaults in /etc/mplayerplug-in.conf are working with most apple trailers. they will be overridden by whatever you have in your user's configuration.
to trace what mplayer-plugin is doing, add
debug=[0-3]
in /etc/mplayerplug-in.conf

[SOLVED]mplayer-plugin not in repos?

Similar Messages

Maybe you are looking for