[Solved] MSI 965P boot message ODD0:HL-DT-ST DVDRAM GSA-4167B

My dear friends,
I have just bought MSI 965P Neo-f and at every boot I get a message “ODD0:HL-DT-ST DVDRAM GSA-4167B. I’m absolutely sure that I have the right settings for the IDE-Cable and the Jumper setting on the DVD/RW is set to master (also I have tried the other two settings for SL and CS).
Therefore the DVD/RW couldn’t be recognized in the BIOS , my DVD/RW works only in PIO mode(no way to force it in DMA) and I have conflicts and a really awful performance with my Windows XP SP2 ???.
Please help if someone already solved this problem.

I actually had a bad installation of the jmicron driver in Windows  . I have also connected my HDD on the jmicron SATA  controller ,and SiSoft Sandra reported that it’s working in UDMA-6 mode,just cannot see if my DVD/RW drive works also in DMA mode. I have tried with Nero Info tool , but since all my drives are now connected on the SCSI controller, there is no such information. Any suggestions?....

Similar Messages

  • [SOLVED] Stop first 20 boot messages clearing

    How to stop the first 20 or so, boot messages clearing? Petty sure this happened after a previous systemd update.
    I know about changing TTYVTDisallocate to no - https://wiki.archlinux.org/index.php/Sy … er_boot.3F - but this only keeps the remaining messages on screen.
    Last edited by Colanco (2013-08-12 07:58:49)

    Colanco wrote:Solved this on my particular setup by doing the following:
    Thanks for posting this - really appreciate it.
    1. Enabled 'early KMS start' by adding radeon to MODULES line in /etc/mkinitcpio.conf:
    https://wiki.archlinux.org/index.php/KM … _KMS_start
    This was needed to stop console is being reset by the graphics module in Late KMS Start (default) thus clearing boot messages before module was loaded.
    OK. So I guess early KMS is not my problem .
    2. Change TTYVTDisallocate to no in [email protected] to stop boot message clearing:
    https://wiki.archlinux.org/index.php/Di … t_Messages
    This does not seem like the right way to do this but I'm not entirely sure what is. I think that what is in that directory should be just a symlink.
    The recommended way to edit unit files is at https://wiki.archlinux.org/index.php/Sy … unit_files. However, I'm not clear quite how to apply that in this case. What I'm currently trying is
    $ cat /etc/systemd/system/[email protected]/TTYVTDisallocate-BLOCK.conf
    [Service]
    TTYVTDisallocate=no
    However this will affect all VTs generated from the template. Does anybody know if it is bad to have TTYVTDisallocate set to false for tty{2,3,...}?
    EDIT: Or are the other VTs generated from something else? It makes no sense to me they'd be generated from the template in /usr/lib/systemd/system since surely TTYVTDisallocate is inappropriate for the other ttys? Doesn't disallocating it make it unavailable for login etc.? Or have I misunderstood?
    3. Increased scrollback for console by adding fbcon=scrollback:300k to /boot/syslinux/syslinux.cfg.
    https://wiki.archlinux.org/index.php/Scrollback_buffer
    Did you also append xxxfb as the wiki says? If so, what did you use? I'm confused because it mentions the name of your video driver but I'm not sure what that is since this is not concerned with X.
    Last edited by cfr (2013-08-12 23:35:57)

  • [Solved] [Xorg+KMS+Intel] Can't see login console / boot messages!

    Hi,
    My problem is that using an Intel video card (with KMS) after latest Xorg 1.8 update, I can't see boot messagges and the login console anymore.
    I've just noticed that after last Xorg update I can't access anymore to runlevel 3 on boot.
    I've got an Intel video card so KMS is enabled by default (and mandatory).
    I always used SLiM as a display manager, configured through /etc/inittab to go to runlevel 5 on boot:
    # /etc/inittab
    # Runlevels:
    # 0 Halt
    # 1(S) Single-user
    # 2 Not used
    # 3 Multi-user
    # 4 Not used
    # 5 X11
    # 6 Reboot
    ## Only one of the following two lines can be uncommented!
    # Boot to console
    #id:3:initdefault:
    # Boot to X11
    id:5:initdefault:
    rc::sysinit:/etc/rc.sysinit
    rs:S1:wait:/etc/rc.single
    rm:2345:wait:/etc/rc.multi
    rh:06:wait:/etc/rc.shutdown
    su:S:wait:/sbin/sulogin -p
    # -8 options fixes umlauts problem on login
    c1:2345:respawn:/sbin/agetty -8 38400 tty1 linux
    c2:2345:respawn:/sbin/agetty -8 38400 tty2 linux
    c3:2345:respawn:/sbin/agetty -8 38400 tty3 linux
    c4:2345:respawn:/sbin/agetty -8 38400 tty4 linux
    c5:2345:respawn:/sbin/agetty -8 38400 tty5 linux
    c6:2345:respawn:/sbin/agetty -8 38400 tty6 linux
    # Hypervisor Virtual Console for Xen and KVM
    #h0:2345:respawn:/sbin/agetty -8 38400 hvc0 linux
    ca::ctrlaltdel:/sbin/shutdown -t3 -r now
    # Example lines for starting a login manager
    #x:5:respawn:/usr/bin/xdm -nodaemon
    #x:5:respawn:/usr/sbin/gdm -nodaemon
    #x:5:respawn:/usr/bin/kdm -nodaemon
    x:5:respawn:/usr/bin/slim >& /dev/null
    To enable runlevel 3 at boot,  I commented the id:5:initdefault: and the x:5:respawn:/usr/bin/slim >& /dev/null lines and uncommented id:3:initdefault:.
    Now, during boot, the last thing I see is Loading UDev modules..., then the screen becomes dark gray and I can't see any other boot messages (actually this appened also before, after xorg update).
    The problem is that before slim started but now I can't see any login console.
    I also figured out that typing my username, password and then startx, starts X normally, so the problem is just that I can't see the tty console anymore.
    Once I am in X I can switch to ttys normally.
    What can I do?
    I just wanted to get rid of slim and start X automatically after console login but I can't see the console login!
    I hope to have been clear enough, thanks for your help!
    Last edited by rent0n (2010-07-04 11:36:38)

    rent0n wrote:
    Well, it seems I spoke too early. It doesn't work as expected at every startup, sometimes I still have the black screen.
    Now I'm trying with:
    video=SVIDEO-1:d
    that seems to work, but I just tested it one time and I'm starting to think that screen blanking happens randomly...
    Any hint is more than welcomed.
    After a few reboots, I can confirm this workaround seems to work.
    This is weird indeed as I don't have any SVIDEO-1 interface listed by xrandr -q, but still.
    Screen 0: minimum 320 x 200, current 1280 x 800, maximum 8192 x 8192
    VGA1 disconnected (normal left inverted right x axis y axis)
    LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 331mm x 207mm
    1280x800 60.0*+
    1024x768 60.0
    800x600 60.3 56.2
    640x480 59.9
    TV1 disconnected (normal left inverted right x axis y axis)
    The only problem is that now boot lasts a lot of time  and, between UDev modules loading and disks checking, I have to wait for at least 30 seconds with a black screen and a central white dash flashing.
    Anyone experiencing the same thing?

  • [SOLVED] how to prevent Xorg from clearing boot messages in scrollback

    I have an updated Arch install with MATE and LightDM. LightDM autologin is enabled, so I normally boot directly to my desktop. I like seeing the messages that flash by during boot, so I deleted the word "quiet" from the linux line in my grub.cfg. Because I want all the messages to still be there after flashing by (in case I want to scroll through them later), I followed the advice here https://wiki.archlinux.org/index.php/Di … t_messages and I also increased the scrollback buffer and enabled early KMS start.
    Despite all the above, I can only scroll back to the beginning of the boot messages if I boot into non-graphical mode (e.g., by adding "systemd.unit=multi-user.target" to GRUB command line). If I allow a normal boot to my destkop and THEN go to non-graphical mode with "sudo systemctl isolate multi-user.target" to look at the boot messages, I notice that I cannot scroll back very far at all--most of the messages that flashed by during boot are gone. Therefore, it seems to me that either lightDM or Xorg is resetting the scrollback buffer and erasing all but the last few boot messages.
    So, how do I tell LightDM or Xorg (whichever one is the culprit) *not* to clear the scrollback buffer, so that when I get out of graphical mode and into non-graphical mode the boot messages are all still there?
    Last edited by bdantas (2014-08-01 14:19:06)

    Since the answer to my original question seems to be "it is not possible," I will make this my last post to prevent the thread from going off-topic.
    I came up with a simple workaround that (almost) recreates the old /var/boot/log:
    1) put "quiet" on grub2's kernel command line so that only* [FAIL] messages show up, so that I don't have to deal with the scrollback buffer
    2) create a startup script with the following contents (script or at least the setterm command must run as root because the setterm command needs to be able to read from /dev/vcs1):
    #!/bin/bash
    # this script will dump the text of tty1 to /var/log/boot, with same formatting as on the screen
    export TERM=xterm
    setterm -dump 1 -file /var/log/boot
    exit 0
    * Unfortunately, even in quiet mode grub2 starts printing all the boot status messages to screen once it encounters a [FAIL]. Therefore, if the [FAIL] occurs early enough in the boot process, the beginning of the messages will scroll off the screen and the workaround won't work. I spun off my two questions related to this nuisance into their own threads:
    a) How to make grub2 actually only print [FAIL] messages during boot? https://bbs.archlinux.org/viewtopic.php?id=184702
    b) How to print the contents of console's scrollback buffer to a file? https://bbs.archlinux.org/viewtopic.php … 9#p1439359
    I hope I can figure out how to do one of the above, because then the workaround would be perfect.
    Thanks for the help, guys!
    Last edited by bdantas (2014-08-15 02:16:38)

  • Msi 965P Neo Power Up Problem

    When I swicth on my pc only the front lights and the cpu fan turn on, there's no beep and no video.  Then I turn it off, wait five seconds, swicth on again and then computer boots. I've change my old power supply for a 550 W 24 pin new one, the 12V CPU power connector is pluged to the board and also installed a new cooler master fan to the procesor. Please help me.  My specifications are:
    MB: MSI 965P Neo Bios Version 1.5
    Video Card: ATI Radeon X1600 pro pci express
    Pocesor: Pentium 4 3.06GHz
    Memory: 1GB DDR2 Super Talent T533UB1G
    Power Supply: ATX 550 W
    Hard Disk: SATA Samsung 250 GB
    CPU Fan: Cooler Master

    PSU Specs:
    RHYCOM-SGT
    Input: 115V 6A 60Hz
    Model: ATX550W-4
    Red: +5V = 35A
    Yellow: +12 = 19A
    Orange +3.3V = 28A
    White:-5V = 0.5A
    Blue: -12V = 0.8A
    Purple: 5VSB = 2.0A
    Green: PS-ON
    Gray: P.G
    Black: GND

  • [Solved] Unable to boot Arch off SUSE GrUB

    Hi,
    I have several OS installed on my machine. I used to boot everything including Arch but BSD, Solaris & PCBSD with GrUB2 off UbuntuStudio. Earlier today I installed SUSE GrUB on sda and now I am unable to boot Arch. I've used SUSE GrUB earlier and was able to boot Arch off it.
    Here is my menu.lst
    # Modified by YaST2. Last modification on Sun Oct 17 18:52:19 SGT 2010
    # THIS FILE WILL BE PARTIALLY OVERWRITTEN by perl-Bootloader
    # Configure custom boot parameters for updated kernels in /etc/sysconfig/bootloader
    default 0
    timeout 8
    ##YaST - generic_mbr
    gfxmenu (hd0,30)/boot/message
    ##YaST - activate
    ###Don't change this comment - YaST2 identifier: Original name: linux###
    title Desktop -- openSUSE 11.2 - 2.6.31.14-0.1
        root (hd0,30)
        kernel /boot/vmlinuz-2.6.31.14-0.1-desktop root=/dev/disk/by-id/ata-ST3320418AS_9VMD0YPT-part31 resume=/dev/disk/by-id/ata-ST3320418AS_9VMD0YPT-part5 splash=silent quiet showopts vga=0x315
        initrd /boot/initrd-2.6.31.14-0.1-desktop
    ###Don't change this comment - YaST2 identifier: Original name: failsafe###
    title Failsafe -- openSUSE 11.2 - 2.6.31.14-0.1
        root (hd0,30)
        kernel /boot/vmlinuz-2.6.31.14-0.1-desktop root=/dev/disk/by-id/ata-ST3320418AS_9VMD0YPT-part31 showopts apm=off noresume edd=off powersaved=off nohz=off highres=off processor.max_cstate=1 x11failsafe vga=0x317
        initrd /boot/initrd-2.6.31.14-0.1-desktop
    ###Don't change this comment - YaST2 identifier: Original name: windows 1###
    title Windows 7 Ultimate Edition x64
        rootnoverify (hd0,0)
        chainloader +1
    ###Don't change this comment - YaST2 identifier: Original name: other###
    title FreeBSD 8.1 i386
        rootnoverify (hd0,2)
        chainloader +1
    ###Don't change this comment - YaST2 identifier: Original name: other###
    title OpenSolaris 2009.06 b134 x86
        rootnoverify (hd0,3)
        chainloader +1
    ###Don't change this comment - YaST2 identifier: Original name: other###
    title PC-BSD 8.1 amd64
        rootnoverify (hd2,0)
        chainloader +1
    ###Don't change this comment - YaST2 identifier: Original name: CentOS (2.6.18-194.11.4.el5xen) (/dev/sda6)###
    title CentOS (2.6.18-194.11.4.el5xen) (/dev/sda6)
        root (hd0,5)
        kernel /boot/vmlinuz-2.6.18-194.11.3.el5 ro root=/dev/sda6 rhgb quiet
        initrd /boot/initrd-2.6.18-194.11.3.el5.img
    ###Don't change this comment - YaST2 identifier: Original name: Centos-base###
    title CentOS-base (2.6.18-194.el5) (on /dev/sda6)
        root (hd0,5)
        kernel /boot/vmlinuz-2.6.18-194.el5 ro root=/dev/sda6 rhgb quiet
        initrd /boot/initrd-2.6.18-194.el5.img
    ###Don't change this comment - YaST2 identifier: Original name:  linux (/dev/sda8)###
    title PCLinuxOS
        root (hd0,7)
        configfile /boot/grub/menu.lst
    ###Don't change this comment - YaST2 identifier: Original name:  linux (/dev/sda10)###
    title Simply Mepis
        root (hd0,9)
        configfile /boot/grub/menu.lst
    ###Don't change this comment - YaST2 identifier: Original name:  Chakra GNU/Linux (/dev/sda12)###
    title Chakra GNU/Linux (/dev/sda12)
        root (hd0,11)
        configfile /boot/grub/menu.lst
    ###Don't change this comment - YaST2 identifier: Original name:  Fedora (2.6.34.7-56.fc13.x86_64) (/dev/sda14)###
    title Fedora (2.6.34.7-56.fc13.x86_64) (/dev/sda14)
        root (hd0,13)
        configfile /boot/grub/menu.lst
    ###Don't change this comment - YaST2 identifier: Original name:  linux (/dev/sda16)###
    title Mandriva Spring 2010.1
        root (hd0,15)
        configfile /boot/grub/menu.lst
    ###Don't change this comment - YaST2 identifier: Original name:  Calculate Linux Desktop x86_64 10.9 KDE (/dev/sda18)###
    title Calculate Linux Desktop x86_64 10.9 KDE (/dev/sda18)
        root (hd0,17)
        configfile /boot/grub/menu.lst
    ###Don't change this comment - YaST2 identifier: Original name: linux###
    title Arch linux 2010.05 x86_64
        rootnoverify (hd0,18)
        chainloader +1
    ###Don't change this comment - YaST2 identifier: Original name:  Desktop -- openSUSE 11.3 - 2.6.34.7-0.3 (/dev/sda23)###
    title openSUSE 11.3 - 2.6.34.7-0.3
        root (hd0,22)
        configfile /boot/grub/menu.lst
    ###Don't change this comment - YaST2 identifier: Original name: other###
    title caeLinux
        root (hd0,24)
        kernel /vmlinuz root=/dev/sda25 ro quiet splash
        initrd /initrd.img
    ###Don't change this comment - YaST2 identifier: Original name: other###
    title UbuntuStudio 10.04 amd64
        root (hd0,26)
        kernel /vmlinuz root=/dev/sda27 ro quiet splash
        initrd /initrd.img
    ###Don't change this comment - YaST2 identifier: Original name: other###
    title Linux Mint 9 amd64
        root (hd0,28)
        kernel /vmlinuz root=/dev/sda29 ro quiet splash
        initrd /initrd.img
    Here is etc/fstab from Arch -
    # /etc/fstab: static file system information
    # <file system>        <dir>         <type>    <options>          <dump> <pass>
    devpts                 /dev/pts      devpts    defaults            0      0
    shm                    /dev/shm      tmpfs     nodev,nosuid        0      0
    #/dev/cdrom             /media/cd   auto    ro,user,noauto,unhide   0      0
    #/dev/dvd               /media/dvd  auto    ro,user,noauto,unhide   0      0
    #/dev/fd0               /media/fl   auto    user,noauto             0      0
    /dev/sda19 /boot ext2 defaults 0 1
    /dev/sda20 / ext4 defaults 0 1
    /dev/sda21 /var ext4 defaults 0 1
    /dev/sda22 /home ext4 defaults 0 1
    /dev/sda5 swap swap defaults 0 0
    I've results from bootinfo script as well but the file is big and I am unable to post all those details in here.
    Best,
    David
    Last edited by avenuemax (2010-10-18 05:30:48)

    Here is the menu list off PCLinuxOS
    timeout 15
    color black/cyan yellow/cyan
    gfxmenu (hd0,7)/boot/gfxmenu
    default 0
    title linux
    kernel (hd0,7)/boot/vmlinuz BOOT_IMAGE=linux root=UUID=77fb6caf-c436-4855-b25a-436f4f6c40f0  vmalloc=256M resume=UUID=92ecb3e1-84a1-4855-8a49-3c9616638795 splash=silent vga=788
    initrd (hd0,7)/boot/initrd.img
    title linux-nonfb
    kernel (hd0,7)/boot/vmlinuz BOOT_IMAGE=linux-nonfb root=UUID=77fb6caf-c436-4855-b25a-436f4f6c40f0  vmalloc=256M resume=UUID=92ecb3e1-84a1-4855-8a49-3c9616638795
    initrd (hd0,7)/boot/initrd.img
    title failsafe
    kernel (hd0,7)/boot/vmlinuz BOOT_IMAGE=failsafe root=UUID=77fb6caf-c436-4855-b25a-436f4f6c40f0  failsafe vmalloc=256M
    initrd (hd0,7)/boot/initrd.img
    title Windows 7 Ultimate Edition x64
    root (hd0,0)
    map (0x81) (0x80)
    map (0x80) (0x81)
    makeactive
    chainloader +1
    title CentOS (Final)
    root (hd0,5)
    configfile /boot/grub/menu.lst
    title MEPIS Linux 8.5
    root (hd0,9)
    configfile /boot/grub/menu.lst
    title Arch
    root (hd0,18)
    configfile /grub/menu.lst
    title Fedora (Goddard)
    root (hd0,13)
    configfile /boot/grub/menu.lst
    title Mandriva Linux (Official)
    root (hd0,15)
    configfile /boot/grub/menu.lst
    title Calculate Linux sda18
    root (hd0,17)
    configfile /boot/grub/menu.lst
    title Chakra
    root (hd0,11)
    configfile /boot/grub/menu.lst
    title openSUSE 11.3 (x86_64)
    VERSION = 11.3
    root (hd0,22)
    configfile /boot/grub/menu.lst
    title PC-BSD 8.1 amd64
    root (hd2,0)
    chainloader +1
    title FreeBSD 8.1 i386
    root (hd0,2)
    chainloader +1
    title OpenSolaris 2009.06 b134 x86
    root (hd0,3)
    chainloader +1
    I can boot Arch from here, wish I get to do that from SUSE GrUB.

  • Need ugly boot message

    I'm new to the mac pro and I have to run WinXP XP is up and configured but but have an issue now that I've installed an Adaptec RAID card.
    I've installed an Adaptec RAID contoller in Slot 2. It is connected only to disks 3 and 4, not to the boot disk. The Mac boots into OS X with no problem. Using the diagnostics util, I can see the card reported in the PCI slot.
    The problem is that when I select WinXP for boot, the system hangs with a black screen and a blinking cursor even before Windows gets a chance to boot. The Adaptec manual says i need to press Ctrl-A to get to the RAID controller configuration. However, I'm never prompted for the Ctrl-A and when I simply press Ctrl-A on boot, the keys seem to be ignored.
    I worry that the RAID controller is taking over the boot sequence but I can't override this since I can't get to the controller config util. How does one access the ugly boot messages on a Mac? Thanks.

    The card is an Adaptec 3405. I've got two 500 Gig Seagates attached to it.
    I didn't want XP dealing with the RAID until I had the bootcamp stuff all working. So I XP installed first. I'm very experienced in XP, just not the Mac.
    The drives are connected directly to the RAID card via SATA cables. I modified the Mac drive bays 3 & 4 by unscrewing the SATA+power connecters at the end of the drive to make room for the SATA connectors going to the card. Drive power is tapped from the power connector in the 2nd CD bay.
    I tried not attacheing the drives but no change. Thanks for your help on this.

  • Solaris 8 boot messages

    Hello
    I have a client who has an old sun blade system running Soalris 8.
    A few days ago he rebooted his system.
    Please notice the following boot messages regarding the volume manager
    genunix: [ID 936769 kern.info] dad0 is /pci@1f,0/ide@d/dad@0,0
    Nov 1 15:20:59 sol8blade dada: [ID 365881 kern.info] <Hitachi HDS721680PLAT80 cyl 39418 alt 2 hd 16 sec 255>
    Nov 1 15:20:59 sol8blade uata: [ID 114370 kern.info] dad1 at pci10b9,52290
    Nov 1 15:20:59 sol8blade uata: [ID 347839 kern.info] target 2 lun 0
    Nov 1 15:20:59 sol8blade genunix: [ID 936769 kern.info] dad1 is /pci@1f,0/ide@d/dad@2,0
    Nov 1 15:21:00 sol8blade dada: [ID 365881 kern.info] <HDS728080PLAT20 cyl 39418 alt 2 hd 16 sec 255>
    Nov 1 15:21:00 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d1: B_FAILFAST I/O disabled
    Nov 1 15:21:00 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d2: B_FAILFAST I/O disabled
    Nov 1 15:21:00 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d1: B_FAILFAST I/O disabled
    Nov 1 15:21:00 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d2: B_FAILFAST I/O disabled
    Nov 1 15:21:00 sol8blade swapgeneric: [ID 308332 kern.info] root on /pseudo/md@0:0,0,blk fstype ufs
    Nov 1 15:21:00 sol8blade genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_trans failed
    Nov 1 15:21:00 sol8blade genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_raid failed
    Nov 1 15:21:00 sol8blade genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_hotspares failed
    Nov 1 15:21:00 sol8blade genunix: [ID 370176 kern.warning] WARNING: forceload of misc/md_sp failed
    Nov 1 15:21:01 sol8blade pcipsy: [ID 370704 kern.info] PCI-device: isa@7, ebus0
    md_mirror: [ID 437521 kern.info] NOTICE: md: d11: B_FAILFAST I/O disabled
    Nov 1 15:21:18 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d12: B_FAILFAST I/O disabled
    Nov 1 15:21:18 sol8blade genunix: [ID 454863 kern.info] dump on /dev/md/dsk/d10 size 1025 MB
    sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d21: B_FAILFAST I/O disabled
    Nov 1 15:21:50 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d22: B_FAILFAST I/O disabled
    Nov 1 15:21:50 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d31: B_FAILFAST I/O disabled
    Nov 1 15:21:50 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d32: B_FAILFAST I/O disabled
    Nov 1 15:21:50 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d41: B_FAILFAST I/O disabled
    Nov 1 15:21:50 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d42: B_FAILFAST I/O disabled
    Nov 1 15:21:50 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d51: B_FAILFAST I/O disabled
    Nov 1 15:21:50 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d52: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d21: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d22: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d31: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d32: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d41: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d42: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d51: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d52: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d51: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d52: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d41: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d42: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d31: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d32: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d21: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d22: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d21: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d22: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d31: B_FAILFAST I/O disabled
    Nov 1 15:21:51 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d32: B_FAILFAST I/O disabled
    Nov 1 15:21:52 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d41: B_FAILFAST I/O disabled
    Nov 1 15:21:52 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d42: B_FAILFAST I/O disabled
    Nov 1 15:21:52 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d51: B_FAILFAST I/O disabled
    Nov 1 15:21:52 sol8blade md_mirror: [ID 437521 kern.info] NOTICE: md: d52: B_FAILFAST I/O disabled
    When I type metastat, I get okay status in all mirrors and submirrors. Metadb also returns no errors.
    Yet I have seen similar boot messages in failed Solaris 9 servers. What can you tell me regarding these messages.
    Should they be the cause for worry or any proactive action?
    I have taken a full flar backup. What should I tell to my client regarding these messages.
    Thank you

    Hi,
    You can ignore them.
    http://sunsolve.sun.com/search/document.do?assetkey=1-72-1007629.1-1
    These are not errors. These are informational (NOTICE) messages
    telling you that the driver underlying your metadevices does not
    support the B_FAILFAST option and, as a result, that capability will
    not be active for speedier recovery. There is no way to disable these
    messages.

  • [Solved] Silent LUKS boot

    [Synopsis] Create a hook as shown below to silence the kernel.
    I'd like to have a truly silent boot as in the Wiki but it only seems to address the login prompt.
    I would also like to get rid of the (USB) boot messages pollution of the the LUKS password prompt for my encrypted root. Is there some configuration of the initramfs required to accomplish this? If so, what exactly would that be?
    I should add that I boot the STUB EFI kernel so there's no bootloader as such.
    Last edited by KairiTech (2013-12-14 01:27:52)

    I created the hook shown below to silence the kernel and now the LUKS prompt is clean.
    /usr/lib/initcpio/hooks/hushkernel
    #!/usr/bin/ash
    # https://bbs.archlinux.org/viewtopic.php?pid=1312342#p1312342
    run_hook() {
    # http://unix.stackexchange.com/questions/44999/how-can-i-hide-messages-of-udev/45525#45525
    # The four values in printk denote: console_loglevel, default_message_loglevel, minimum_console_loglevel and default_console_loglevel respectively.
    # These values influence printk() behavior when printing or logging error messages. See 'man 2 syslog' for more info on the different loglevels.
    # • console_loglevel: messages with a higher priority than this will be printed to the console
    # • default_message_level: messages without an explicit priority will be printed with this priority
    # • minimum_console_loglevel: minimum (highest) value to which console_loglevel can be set
    # • default_console_loglevel: default value for console_loglevel
    #define KERN_EMERG "<0>" /* system is unusable */
    #define KERN_ALERT "<1>" /* action must be taken immediately */
    #define KERN_CRIT "<2>" /* critical conditions */
    #define KERN_ERR "<3>" /* error conditions */
    #define KERN_WARNING "<4>" /* warning conditions */
    #define KERN_NOTICE "<5>" /* normal but significant condition */
    #define KERN_INFO "<6>" /* informational */
    #define KERN_DEBUG "<7>" /* debug-level messages */
    echo "3 3 3 3" > /proc/sys/kernel/printk
    /usr/lib/initcpio/install/hushkernel
    #!/bin/ash
    build() {
    add_runscript
    help() {
    cat <<HELPEOF
    This hook will suppress kernel messages during the boot LUKS password prompt
    HELPEOF

  • "Error 16" solution doesn't solve problem, same error message pops up.  Further steps?

    Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16.  Stumped!

    Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
    situation, I¹m afraid.  I think I¹m going to have to start with a new drive
    and import/update until I find the source of this issue.
    Jim
    "Error 16" solution doesn't solve problem, same error message pops up.
    Further steps?
    created by gener7 <https://forums.adobe.com/people/gener7>  in Photoshop
    General Discussion - View the full discussion
    <https://forums.adobe.com/message/7154907#7154907>
    Permissions problem.  Open Terminal and copy/paste this line: sudo chmod -R
    777 /Library/Application\ Support/Adobe Gene
    If the reply above answers your question, please take a moment to mark this
    answer as correct by visiting:
    https://forums.adobe.com/message/7154907#7154907 and clicking ŒCorrect¹ below
    the answer Replies to this message go to everyone subscribed to this thread,
    not directly to the person who posted the message. To post a reply, either
    reply to this email or visit the message page:
    Please note that the Adobe
    Forums do not accept email attachments. If you want to embed an image in your
    message please visit the thread in the forum and click the camera icon:
    https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
    thread, please visit the message page at
    , click "Following" at the
    top right, & "Stop Following" Start a new discussion in Photoshop General
    Discussion by email
    <mailto:[email protected]>  or
    at Adobe Community
    <https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
    &container=4694>  For more information about maintaining your forum email
    notifications please go to https://forums.adobe.com/thread/1516624.
    >

  • Boot messages on screen missing...

    Boot messages suddenly stopped showing up on screen during boot  -  these are the messages preceeded with the green [OK] and red [FAILED]. 
    The equivalent shutdown messages still show on screen when shutting down. No change in mkinitcpio.conf or syslinux.cfg (syslinux bootloader).  ....and there is no "splash" or "quiet" parameter being passed to kernel. 
    Missing messages most likely started after a system upgrade but not sure which package or when.
    During boot I get the "Welcome to Archlinux" and some fsck messages, then the prompt for userid. 
    No problems with system after boot.....just not getting those system boot messages.  Hate when stuff changes without knowing why. 
    I know about getting boot messages via journalctl, so please do not recommend.

    Following is pacman.log from Aug 2014 to now.  Appreciate the help. 
    [2014-08-02 10:27] [PACMAN] Running 'pacman -Syu'
    [2014-08-02 10:27] [PACMAN] synchronizing package lists
    [2014-08-02 10:27] [PACMAN] starting full system upgrade
    [2014-08-02 10:28] [PACMAN] removed lzo2 (2.08-1)
    [2014-08-02 10:28] [PACMAN] installed lzo (2.08-3)
    [2014-08-02 10:28] [PACMAN] upgraded cairo (1.12.16-2 -> 1.12.16-3)
    [2014-08-02 10:28] [PACMAN] upgraded libcups (1.7.4-1 -> 1.7.5-1)
    [2014-08-02 10:28] [PACMAN] upgraded cups (1.7.4-1 -> 1.7.5-1)
    [2014-08-02 10:28] [PACMAN] upgraded ffmpeg (1:2.3-1 -> 1:2.3.1-1)
    [2014-08-02 10:28] [PACMAN] upgraded gettext (0.19.1-1 -> 0.19.2-1)
    [2014-08-02 10:28] [PACMAN] upgraded tdb (1.2.12-1 -> 1.3.0-1)
    [2014-08-02 10:28] [PACMAN] upgraded ldb (1.1.16-1 -> 1.1.17-1)
    [2014-08-02 10:28] [PACMAN] upgraded libarchive (3.1.2-6 -> 3.1.2-8)
    [2014-08-02 10:28] [PACMAN] upgraded libwbclient (4.1.9-1 -> 4.1.11-1)
    [2014-08-02 10:28] [PACMAN] upgraded mkinitcpio (17-1 -> 18-1)
    [2014-08-02 10:28] [PACMAN] upgraded parted (3.1-4 -> 3.2-1)
    [2014-08-02 10:28] [PACMAN] upgraded python2-boto (2.31.1-1 -> 2.32.0-1)
    [2014-08-02 10:28] [PACMAN] upgraded smbclient (4.1.9-1 -> 4.1.11-1)
    [2014-08-02 10:28] [PACMAN] upgraded samba (4.1.9-1 -> 4.1.11-1)
    [2014-08-02 10:28] [ALPM-SCRIPTLET] Syslinux BIOS update successful
    [2014-08-02 10:28] [ALPM-SCRIPTLET]
    [2014-08-02 10:28] [ALPM-SCRIPTLET] ==> For setting up Syslinux BIOS using the syslinux-install_update script follow
    [2014-08-02 10:28] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Syslinux#Automatic_Install
    [2014-08-02 10:28] [ALPM-SCRIPTLET]
    [2014-08-02 10:28] [ALPM-SCRIPTLET] ==> For setting up Syslinux EFI follow
    [2014-08-02 10:28] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Syslinux#UEFI_Systems
    [2014-08-02 10:28] [ALPM-SCRIPTLET]
    [2014-08-02 10:28] [ALPM-SCRIPTLET] ==> The syslinux-install_update script does not currently support EFI install
    [2014-08-02 10:28] [ALPM-SCRIPTLET]
    [2014-08-02 10:28] [PACMAN] upgraded syslinux (6.03pre18-1 -> 6.03pre19-1)
    [2014-08-02 10:28] [PACMAN] upgraded xorg-server-common (1.16.0-5 -> 1.16.0-6)
    [2014-08-02 10:28] [PACMAN] upgraded xorg-server (1.16.0-5 -> 1.16.0-6)
    [2014-08-02 10:28] [PACMAN] upgraded xorg-xrandr (1.4.2-1 -> 1.4.3-1)
    [2014-08-02 10:28] Exited with code 0
    [2014-08-06 02:23] [PACMAN] Running 'pacman -Syu'
    [2014-08-06 02:23] [PACMAN] synchronizing package lists
    [2014-08-06 02:23] [PACMAN] starting full system upgrade
    [2014-08-06 02:25] [PACMAN] upgraded mesa (10.2.4-1 -> 10.2.5-1)
    [2014-08-06 02:25] [PACMAN] upgraded mesa-libgl (10.2.4-1 -> 10.2.5-1)
    [2014-08-06 02:25] [PACMAN] upgraded ati-dri (10.2.4-1 -> 10.2.5-1)
    [2014-08-06 02:25] [PACMAN] installed pyqt5-common (5.3.1-1)
    [2014-08-06 02:25] [PACMAN] installed python2-pyqt5 (5.3.1-1)
    [2014-08-06 02:25] [PACMAN] installed qt5-svg (5.3.1-1)
    [2014-08-06 02:25] [PACMAN] installed python2-chardet (2.2.1-2)
    [2014-08-06 02:25] [PACMAN] installed python2-html5lib (0.999-4)
    [2014-08-06 02:25] [PACMAN] upgraded calibre (1.40.0-1 -> 1.204.1-2)
    [2014-08-06 02:25] [PACMAN] upgraded device-mapper (2.02.106-2 -> 2.02.108-1)
    [2014-08-06 02:25] [PACMAN] upgraded dhcpcd (6.4.2-1 -> 6.4.3-1)
    [2014-08-06 02:25] [PACMAN] upgraded libutil-linux (2.24.2-1 -> 2.25-3)
    [2014-08-06 02:25] [PACMAN] upgraded e2fsprogs (1.42.10-1 -> 1.42.11-1)
    [2014-08-06 02:25] [PACMAN] upgraded git (2.0.3-1 -> 2.0.4-1)
    [2014-08-06 02:25] [PACMAN] upgraded lib32-mesa (10.2.4-1 -> 10.2.5-1)
    [2014-08-06 02:25] [PACMAN] upgraded lib32-mesa-libgl (10.2.4-1 -> 10.2.5-1)
    [2014-08-06 02:25] [PACMAN] upgraded libpeas (1.10.0-1 -> 1.10.1-1)
    [2014-08-06 02:25] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-08-06 02:25] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Starting build: 3.15.8-1-ARCH
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [resume]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [usr]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Starting build: 3.15.8-1-ARCH
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [resume]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] -> Running build hook: [usr]
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
    [2014-08-06 02:25] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-08-06 02:25] [PACMAN] upgraded linux (3.15.7-1 -> 3.15.8-1)
    [2014-08-06 02:25] [PACMAN] upgraded lvm2 (2.02.106-2 -> 2.02.108-1)
    [2014-08-06 02:25] [PACMAN] upgraded python-setuptools (1:5.4.1-1 -> 1:5.4.2-1)
    [2014-08-06 02:25] [PACMAN] upgraded python2-boto (2.32.0-1 -> 2.32.1-1)
    [2014-08-06 02:25] [PACMAN] upgraded s-nail (14.7.4-1 -> 14.7.5-1)
    [2014-08-06 02:25] [PACMAN] upgraded tdb (1.3.0-1 -> 1.3.0-2)
    [2014-08-06 02:25] [PACMAN] upgraded traceroute (2.0.19-2 -> 2.0.20-1)
    [2014-08-06 02:25] [PACMAN] upgraded util-linux (2.24.2-1 -> 2.25-3)
    [2014-08-06 02:25] [PACMAN] upgraded virtualbox (4.3.14-2 -> 4.3.14-3)
    [2014-08-06 02:25] [PACMAN] upgraded xorg-twm (1.0.8-2 -> 1.0.8-3)
    [2014-08-06 02:25] [PACMAN] upgraded youtube-dl (2014.07.30-1 -> 2014.08.05-1)
    [2014-08-06 02:25] Exited with code 0
    [2014-08-07 09:40] Exited with code 0
    [2014-08-07 09:40] [PACMAN] Running 'pacman -R nss'
    [2014-08-07 09:40] Exited with code 1
    [2014-08-07 23:10] Exited with code 0
    [2014-08-07 23:12] Exited with code 0
    [2014-08-30 01:55] [PACMAN] Running 'pacman -Sc'
    [2014-08-30 01:56] [PACMAN] Running 'pacman -Syuw'
    [2014-08-30 01:56] [PACMAN] synchronizing package lists
    [2014-08-30 01:56] [PACMAN] starting full system upgrade
    [2014-08-30 01:57] [PACMAN] Running 'pacman -Syuw'
    [2014-08-30 01:57] [PACMAN] synchronizing package lists
    [2014-08-30 01:57] [PACMAN] starting full system upgrade
    [2014-08-30 09:30] Exited with code 130
    [2014-08-30 09:31] Exited with code 0
    [2014-08-30 09:52] [PACMAN] Running 'pacman -Syu'
    [2014-08-30 09:52] [PACMAN] synchronizing package lists
    [2014-08-30 09:52] [PACMAN] starting full system upgrade
    [2014-08-30 09:58] [PACMAN] removed icedtea-web-java7 (1.5-1)
    [2014-08-30 09:58] [PACMAN] removed libreoffice-en-US (4.2.5-1)
    [2014-08-30 09:58] [PACMAN] removed libreoffice-common (4.2.5-1)
    [2014-08-30 09:58] [PACMAN] removed libreoffice-calc (4.2.5-1)
    [2014-08-30 09:58] [PACMAN] removed libreoffice-draw (4.2.5-1)
    [2014-08-30 09:58] [PACMAN] removed libreoffice-impress (4.2.5-1)
    [2014-08-30 09:58] [PACMAN] removed libreoffice-writer (4.2.5-1)
    [2014-08-30 09:58] [PACMAN] upgraded openssl (1.0.1.h-1 -> 1.0.1.i-1)
    [2014-08-30 09:58] [PACMAN] upgraded mariadb-clients (10.0.12-2 -> 10.0.13-1)
    [2014-08-30 09:58] [PACMAN] upgraded mariadb (10.0.12-2 -> 10.0.13-1)
    [2014-08-30 09:58] [PACMAN] upgraded akonadi (1.12.1-2 -> 1.13.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded bash (4.3.018-3 -> 4.3.024-1)
    [2014-08-30 09:58] [PACMAN] upgraded kbd (2.0.1-1 -> 2.0.2-1)
    [2014-08-30 09:58] [PACMAN] upgraded libgcrypt (1.6.1-1 -> 1.6.2-1)
    [2014-08-30 09:58] [PACMAN] upgraded libsystemd (215-4 -> 216-1)
    [2014-08-30 09:58] [PACMAN] upgraded systemd (215-4 -> 216-1)
    [2014-08-30 09:58] [PACMAN] upgraded mesa (10.2.5-1 -> 10.2.6-1)
    [2014-08-30 09:58] [PACMAN] upgraded mesa-libgl (10.2.5-1 -> 10.2.6-1)
    [2014-08-30 09:58] [PACMAN] upgraded ati-dri (10.2.5-1 -> 10.2.6-1)
    [2014-08-30 09:58] [PACMAN] upgraded avahi (0.6.31-12 -> 0.6.31-13)
    [2014-08-30 09:58] [PACMAN] upgraded avr-gcc (4.9.0-2 -> 4.9.1-1)
    [2014-08-30 09:58] [PACMAN] upgraded avr-libc (1.8.0-5 -> 1.8.1-1)
    [2014-08-30 09:58] [PACMAN] upgraded krb5 (1.12.1-1 -> 1.12.2-1)
    [2014-08-30 09:58] [PACMAN] upgraded kdelibs (4.13.3-2 -> 4.14.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded gnupg (2.0.25-1 -> 2.0.26-1)
    [2014-08-30 09:58] [PACMAN] upgraded gpgme (1.5.0-1 -> 1.5.1-1)
    [2014-08-30 09:58] [PACMAN] upgraded kdepimlibs (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded poppler (0.26.3-1 -> 0.26.4-1)
    [2014-08-30 09:58] [PACMAN] upgraded poppler-qt4 (0.26.3-1 -> 0.26.4-1)
    [2014-08-30 09:58] [PACMAN] upgraded libtasn1 (4.0-1 -> 4.1-1)
    [2014-08-30 09:58] [PACMAN] upgraded gnutls (3.3.6-1 -> 3.3.7-1)
    [2014-08-30 09:58] [PACMAN] upgraded gsm (1.0.13-7 -> 1.0.13-8)
    [2014-08-30 09:58] [PACMAN] upgraded libx264 (1:142.20140311-4 -> 1:142.20140311-6)
    [2014-08-30 09:58] [PACMAN] upgraded ffmpeg (1:2.3.1-1 -> 1:2.3.3-1)
    [2014-08-30 09:58] [PACMAN] upgraded kdegraphics-mobipocket (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded kfilemetadata (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded baloo (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded bluez-libs (5.21-2 -> 5.22-2)
    [2014-08-30 09:58] [PACMAN] upgraded bluez-utils (5.21-2 -> 5.22-2)
    [2014-08-30 09:58] [PACMAN] upgraded imagemagick (6.8.9.6-1 -> 6.8.9.7-1)
    [2014-08-30 09:58] [PACMAN] upgraded python2-lxml (3.3.5-1 -> 3.3.6-1)
    [2014-08-30 09:58] [PACMAN] upgraded libwebp (0.4.0-2 -> 0.4.1-1)
    [2014-08-30 09:58] [PACMAN] upgraded python2-pillow (2.5.1-1 -> 2.5.3-2)
    [2014-08-30 09:58] [PACMAN] upgraded calibre (1.204.1-2 -> 2.1.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded cherrytree (0.33.4-2 -> 0.34.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded convertlit (1.8-6 -> 1.8-7)
    [2014-08-30 09:58] [PACMAN] upgraded cracklib (2.9.0-2 -> 2.9.1-1)
    [2014-08-30 09:58] [PACMAN] upgraded cups-filters (1.0.55-1 -> 1.0.58-1)
    [2014-08-30 09:58] [PACMAN] upgraded device-mapper (2.02.108-1 -> 2.02.109-2)
    [2014-08-30 09:58] [PACMAN] upgraded poppler-glib (0.26.3-1 -> 0.26.4-1)
    [2014-08-30 09:58] [PACMAN] upgraded evince (3.12.1-1 -> 3.12.2-1)
    [2014-08-30 09:58] [PACMAN] upgraded fakeroot (1.20-1 -> 1.20.1-1)
    [2014-08-30 09:58] [PACMAN] upgraded flashplugin (11.2.202.394-1 -> 11.2.202.400-1)
    [2014-08-30 09:58] [PACMAN] upgraded git (2.0.4-1 -> 2.1.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded glew (1.10.0-2 -> 1.11.0-1)
    [2014-08-30 09:58] [PACMAN] upgraded gperf (3.0.4-4 -> 3.0.4-5)
    [2014-08-30 09:58] [PACMAN] upgraded gtksourceview3 (3.12.2-1 -> 3.12.3-1)
    [2014-08-30 09:58] [PACMAN] upgraded harfbuzz (0.9.32-1 -> 0.9.35-1)
    [2014-08-30 09:58] [PACMAN] upgraded harfbuzz-icu (0.9.32-1 -> 0.9.35-1)
    [2014-08-30 09:58] [ALPM] warning: /etc/profile.d/jre.sh saved as /etc/profile.d/jre.sh.pacorig
    [2014-08-30 09:58] [ALPM] warning: /etc/profile.d/jre.csh saved as /etc/profile.d/jre.csh.pacorig
    [2014-08-30 09:58] [ALPM-SCRIPTLET] Installing multiple non-conflicting Java environments is now supported
    [2014-08-30 09:58] [ALPM-SCRIPTLET] Check the following wiki section for more info:
    [2014-08-30 09:58] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Java
    [2014-08-30 09:58] [ALPM-SCRIPTLET] Please make sure JAVA_HOME is set to /usr/lib/jvm/java-default-runtime
    [2014-08-30 09:58] [ALPM-SCRIPTLET] If not, you may have to logout and login again to set it according to /etc/profile.d/jre.sh
    [2014-08-30 09:58] [PACMAN] installed java-common (1-5)
    [2014-08-30 09:59] [PACMAN] upgraded jre7-openjdk-headless (7.u65_2.5.1-3 -> 7.u65_2.5.2-1)
    [2014-08-30 09:59] [PACMAN] upgraded jre7-openjdk (7.u65_2.5.1-3 -> 7.u65_2.5.2-1)
    [2014-08-30 09:59] [PACMAN] installed icedtea-web (1.5.1-1)
    [2014-08-30 09:59] [PACMAN] installed zita-alsa-pcmi (0.2.0-1)
    [2014-08-30 09:59] [PACMAN] installed zita-resampler (1.3.0-2)
    [2014-08-30 09:59] [PACMAN] upgraded jack (0.124.1-1 -> 0.124.1-3)
    [2014-08-30 09:59] [PACMAN] upgraded kdebase-katepart (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded oxygen-icons (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded kdebase-runtime (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded libkexiv2 (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded kdegraphics-okular (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded kdesdk-kate (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-harfbuzz (0.9.32-1 -> 0.9.35-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-krb5 (1.12.1-1 -> 1.12.2-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-libcups (1.7.4-1 -> 1.7.5-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-libgcrypt (1.6.1-1 -> 1.6.2-1)
    [2014-08-30 09:59] [PACMAN] upgraded xcb-proto (1.10-2 -> 1.11-1)
    [2014-08-30 09:59] [PACMAN] upgraded libxcb (1.10-3 -> 1.11-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-libxcb (1.10-3 -> 1.11-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-openssl (1.0.1.h-1 -> 1.0.1.i-1)
    [2014-08-30 09:59] [PACMAN] installed lib32-libssh2 (1.4.3-2)
    [2014-08-30 09:59] [PACMAN] installed lib32-curl (7.37.1-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-systemd (215-1 -> 216-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-mesa (10.2.5-1 -> 10.2.6-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-mesa-libgl (10.2.5-1 -> 10.2.6-1)
    [2014-08-30 09:59] [PACMAN] upgraded pango (1.36.5-1 -> 1.36.6-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-pango (1.36.5-1 -> 1.36.6-1)
    [2014-08-30 09:59] [PACMAN] upgraded sqlite (3.8.5-1 -> 3.8.6-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-sqlite (3.8.5-1 -> 3.8.6-1)
    [2014-08-30 09:59] [PACMAN] upgraded lib32-util-linux (2.24.2-1 -> 2.25-1)
    [2014-08-30 09:59] [PACMAN] upgraded libbsd (0.6.0-2 -> 0.7.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded libedit (20140213_3.1-1 -> 20140620_3.1-1)
    [2014-08-30 09:59] [PACMAN] upgraded menu-cache (0.5.1-2 -> 0.6.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded libfm (1.2.1-1 -> 1.2.2.1-1)
    [2014-08-30 09:59] [PACMAN] upgraded libidn (1.28-2 -> 1.29-1)
    [2014-08-30 09:59] [PACMAN] upgraded libkcddb (4.13.3-1 -> 4.14.0-1)
    [2014-08-30 09:59] [PACMAN] upgraded libmm-glib (1.2.0-4 -> 1.2.0-5)
    [2014-08-30 09:59] [PACMAN] upgraded libnl (3.2.24-1 -> 3.2.25-1)
    [2014-08-30 09:59] [PACMAN] upgraded libpcap (1.5.3-1 -> 1.6.1-1)
    [2014-08-30 09:59] [PACMAN] installed libreoffice-still-en-US (4.2.6-4)
    [2014-08-30 09:59] [ALPM-SCRIPTLET] Arch is now shipping LibreOffice in two branches:
    [2014-08-30 09:59] [ALPM-SCRIPTLET] * libreoffice-still: the maintenance branch you are using right now
    [2014-08-30 09:59] [ALPM-SCRIPTLET] * libreoffice-fresh: the new fresh release branch offering latest feature additions
    [2014-08-30 09:59] [ALPM-SCRIPTLET] If you want switch to the "fresh" branch run
    [2014-08-30 09:59] [ALPM-SCRIPTLET] pacman -S libreoffice-fresh
    [2014-08-30 09:59] [PACMAN] installed libreoffice-still-common (4.2.6-4)
    [2014-08-30 09:59] [PACMAN] installed libreoffice-still-calc (4.2.6-4)
    [2014-08-30 09:59] [PACMAN] installed libreoffice-still-draw (4.2.6-4)
    [2014-08-30 09:59] [PACMAN] installed libreoffice-still-impress (4.2.6-4)
    [2014-08-30 09:59] [PACMAN] installed libreoffice-still-writer (4.2.6-4)
    [2014-08-30 09:59] [PACMAN] upgraded libunrar (1:5.1.6-1 -> 1:5.1.7-1)
    [2014-08-30 09:59] [PACMAN] upgraded libwacom (0.9-1 -> 0.10-1)
    [2014-08-30 09:59] [PACMAN] upgraded libxkbcommon (0.4.2-1 -> 0.4.3-1)
    [2014-08-30 09:59] [PACMAN] upgraded libxkbcommon-x11 (0.4.2-1 -> 0.4.3-1)
    [2014-08-30 09:59] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2014-08-30 09:59] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2014-08-30 09:59] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2014-08-30 09:59] [ALPM-SCRIPTLET] ==> Starting build: 3.16.1-1-ARCH
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [resume]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [usr]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-08-30 09:59] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux.img
    [2014-08-30 09:59] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-08-30 09:59] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2014-08-30 09:59] [ALPM-SCRIPTLET] ==> Starting build: 3.16.1-1-ARCH
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2014-08-30 09:59] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2014-08-30 10:00] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2014-08-30 10:00] [ALPM-SCRIPTLET] -> Running build hook: [resume]
    [2014-08-30 10:00] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2014-08-30 10:00] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2014-08-30 10:00] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2014-08-30 10:00] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2014-08-30 10:00] [ALPM-SCRIPTLET] -> Running build hook: [usr]
    [2014-08-30 10:00] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2014-08-30 10:00] [ALPM-SCRIPTLET] ==> Creating gzip-compressed initcpio image: /boot/initramfs-linux-fallback.img
    [2014-08-30 10:00] [ALPM-SCRIPTLET] ==> Image generation successful
    [2014-08-30 10:00] [PACMAN] upgraded linux (3.15.8-1 -> 3.16.1-1)
    [2014-08-30 10:00] [ALPM-SCRIPTLET] :: lirc.service and lircm.service have been replaced
    [2014-08-30 10:00] [ALPM-SCRIPTLET] by the upstream unit files lircd.service and
    [2014-08-30 10:00] [ALPM-SCRIPTLET] lircmd.service.
    [2014-08-30 10:00] [PACMAN] upgraded lirc-utils (1:0.9.0-75 -> 1:0.9.1.a-3)
    [2014-08-30 10:00] [PACMAN] installed thin-provisioning-tools (0.3.2-1)
    [2014-08-30 10:00] [PACMAN] upgraded lvm2 (2.02.108-1 -> 2.02.109-2)
    [2014-08-30 10:00] [PACMAN] upgraded man-pages (3.70-1 -> 3.71-1)
    [2014-08-30 10:00] [PACMAN] upgraded mencoder (37224-1 -> 37224-2)
    [2014-08-30 10:00] [PACMAN] upgraded mesa-demos (8.2.0-1 -> 8.2.0-3)
    [2014-08-30 10:00] [PACMAN] upgraded mplayer (37224-1 -> 37224-2)
    [2014-08-30 10:00] [PACMAN] upgraded openresolv (3.5.6-1 -> 3.5.7-1)
    [2014-08-30 10:00] [PACMAN] upgraded netctl (1.8-1 -> 1.9-1)
    [2014-08-30 10:00] [PACMAN] upgraded nmap (6.46-1 -> 6.47-2)
    [2014-08-30 10:00] [PACMAN] upgraded ntp (4.2.7.p446-1 -> 4.2.7.p465-1)
    [2014-08-30 10:00] [PACMAN] upgraded openal (1.15.1-2 -> 1.16.0-1)
    [2014-08-30 10:00] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2014-08-30 10:00] [PACMAN] upgraded pacman-mirrorlist (20140706-1 -> 20140823-1)
    [2014-08-30 10:00] [PACMAN] upgraded pcmanfm (1.2.1-1 -> 1.2.2-1)
    [2014-08-30 10:00] [PACMAN] installed perl-xml-namespacesupport (1.11-3)
    [2014-08-30 10:00] [PACMAN] installed perl-xml-sax-base (1.08-3)
    [2014-08-30 10:00] [PACMAN] installed perl-xml-sax (0.99-4)
    [2014-08-30 10:00] [PACMAN] installed perl-xml-sax-expat (0.51-2)
    [2014-08-30 10:00] [PACMAN] upgraded perl-xml-simple (2.20-2 -> 2.20-3)
    [2014-08-30 10:00] [PACMAN] upgraded php (5.5.15-1 -> 5.5.16-2)
    [2014-08-30 10:00] [PACMAN] upgraded poppler-data (0.4.6-2 -> 0.4.7-1)
    [2014-08-30 10:00] [PACMAN] upgraded python-setuptools (1:5.4.2-1 -> 1:5.7-1)
    [2014-08-30 10:00] [PACMAN] upgraded python2-paramiko (1.14.0-1 -> 1.14.1-1)
    [2014-08-30 10:00] [PACMAN] upgraded r8168 (8.038.00-9 -> 8.038.00-10)
    [2014-08-30 10:00] [PACMAN] upgraded reflector (2014-4 -> 2014.8-1)
    [2014-08-30 10:00] [PACMAN] upgraded s-nail (14.7.5-1 -> 14.7.6-1)
    [2014-08-30 10:00] [PACMAN] upgraded strace (4.8-1 -> 4.9-1)
    [2014-08-30 10:00] [ALPM-SCRIPTLET] ==> Make sure you have ForwardToSyslog=yes in /etc/systemd/journald.conf
    [2014-08-30 10:00] [PACMAN] upgraded syslog-ng (3.5.5-1 -> 3.5.6-1)
    [2014-08-30 10:00] [PACMAN] upgraded systemd-sysvcompat (215-4 -> 216-1)
    [2014-08-30 10:00] [PACMAN] upgraded tcl (8.6.1-1 -> 8.6.2-1)
    [2014-08-30 10:00] [PACMAN] upgraded tcpdump (4.5.1-1 -> 4.6.1-1)
    [2014-08-30 10:00] [ALPM-SCRIPTLET] You must install one of tesseract-data-* packages or whole tesseract-data group
    [2014-08-30 10:00] [PACMAN] upgraded tesseract (3.02.02-4 -> 3.03rc1-1)
    [2014-08-30 10:00] [PACMAN] upgraded tesseract-data-eng (3.02.02-4 -> 3.02.02-5)
    [2014-08-30 10:00] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2014-08-30 10:00] [ALPM-SCRIPTLET] warning: kpathsea: configuration file texmf.cnf not found in these directories: /usr/bin:/usr/bin/share/texmf-local/web2c:/usr/bin/share/texmf-dist/web2c:/usr/bin/share/texmf/web2c:/usr/bin/texmf-local/web2c:/usr/bin/texmf-dist/web2c:/usr/bin/texmf/web2c:/usr:/usr/share/texmf-local/web2c:/usr/share/texmf-dist/web2c:/usr/share/texmf/web2c:/usr/texmf-local/web2c:/usr/texmf-dist/web2c:/usr/texmf/web2c://texmf-local/web2c:/://share/texmf-local/web2c://share/texmf-dist/web2c://share/texmf/web2c://texmf-local/web2c://texmf-dist/web2c://texmf/web2c.
    [2014-08-30 10:00] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2014-08-30 10:00] [PACMAN] upgraded texlive-bin (2013.30973-10 -> 2014.34260-1)
    [2014-08-30 10:00] [PACMAN] upgraded tk (8.6.1-1 -> 8.6.2-1)
    [2014-08-30 10:00] [PACMAN] upgraded tzdata (2014e-1 -> 2014f-1)
    [2014-08-30 10:00] [PACMAN] upgraded unrar (1:5.1.6-1 -> 1:5.1.7-1)
    [2014-08-30 10:00] [PACMAN] upgraded vim-runtime (7.4.383-1 -> 7.4.410-1)
    [2014-08-30 10:00] [PACMAN] installed libyaml (0.1.6-1)
    [2014-08-30 10:00] [ALPM-SCRIPTLET] The default location of gem installs is $HOME/.gem/ruby
    [2014-08-30 10:00] [ALPM-SCRIPTLET] Add the following line to your PATH if you plan to install using gem
    [2014-08-30 10:00] [ALPM-SCRIPTLET] $(ruby -rubygems -e "puts Gem.user_dir")/bin
    [2014-08-30 10:00] [ALPM-SCRIPTLET] If you want to install to the system wide location, you must either:
    [2014-08-30 10:00] [ALPM-SCRIPTLET] edit /etc/gemrc or run gem with the --no-user-install flag.
    [2014-08-30 10:00] [PACMAN] installed ruby (2.1.2-1)
    [2014-08-30 10:00] [PACMAN] upgraded vim (7.4.383-1 -> 7.4.410-1)
    [2014-08-30 10:00] [PACMAN] upgraded virtualbox-guest-modules (4.3.14-3 -> 4.3.14-5)
    [2014-08-30 10:00] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
    [2014-08-30 10:00] [PACMAN] upgraded virtualbox-host-modules (4.3.14-3 -> 4.3.14-5)
    [2014-08-30 10:00] [ALPM-SCRIPTLET] Wordpress is in /usr/share/webapps now
    [2014-08-30 10:00] [PACMAN] upgraded wordpress (3.9.1-1 -> 3.9.2-1)
    [2014-08-30 10:00] [PACMAN] upgraded x264 (1:142.20140311-4 -> 1:142.20140311-6)
    [2014-08-30 10:01] [ALPM-SCRIPTLET] To autostart xbmc standalone read: https://wiki.archlinux.org/index.php/Xbmc#Autostarting_at_boot
    [2014-08-30 10:01] [PACMAN] upgraded xbmc (13.1-4 -> 13.2-2)
    [2014-08-30 10:01] [PACMAN] upgraded xf86-input-mouse (1.9.0-3 -> 1.9.1-1)
    [2014-08-30 10:01] [PACMAN] upgraded xfsprogs (3.2.0-1 -> 3.2.1-1)
    [2014-08-30 10:01] [PACMAN] upgraded xorg-xinit (1.3.3-3 -> 1.3.3-4)
    [2014-08-30 10:01] [PACMAN] upgraded youtube-dl (2014.08.05-1 -> 2014.08.29-1)
    [2014-08-30 10:01] Exited with code 0
    [2014-08-30 10:08] [PACMAN] Running 'pacman -Syu'
    [2014-08-30 10:08] [PACMAN] synchronizing package lists
    [2014-08-30 10:08] [PACMAN] starting full system upgrade
    [2014-08-30 10:08] [PACMAN] upgraded icedtea-web (1.5.1-1 -> 1.5.1-2)
    [2014-08-30 10:08] Exited with code 0
    [2014-08-30 10:09] [PACMAN] Running 'pacman -Syu'
    [2014-08-30 10:09] [PACMAN] synchronizing package lists
    [2014-08-30 10:09] [PACMAN] starting full system upgrade
    [2014-08-30 10:09] Exited with code 0
    [2014-08-30 18:15] [PACMAN] Running 'pacman -Syu'
    [2014-08-30 18:15] [PACMAN] synchronizing package lists
    [2014-08-30 18:15] [PACMAN] starting full system upgrade
    [2014-08-31 02:07] [PACMAN] Running 'pacman -Syu'
    [2014-08-31 02:07] [PACMAN] synchronizing package lists
    [2014-08-31 02:07] [PACMAN] starting full system upgrade
    [2014-08-31 02:07] Exited with code 0
    [2014-09-03 00:45] [PACMAN] Running 'pacman -Syu'
    [2014-09-03 00:45] [PACMAN] synchronizing package lists
    [2014-09-03 00:45] [PACMAN] starting full system upgrade
    [2014-09-03 00:48] [PACMAN] upgraded libsystemd (216-1 -> 216-3)
    [2014-09-03 00:48] [ALPM-SCRIPTLET] :: Coredumps are handled by systemd by default. Collection behavior can be
    [2014-09-03 00:48] [ALPM-SCRIPTLET] tuned in /etc/systemd/coredump.conf.
    [2014-09-03 00:48] [PACMAN] upgraded systemd (216-1 -> 216-3)
    [2014-09-03 00:48] [PACMAN] upgraded device-mapper (2.02.109-2 -> 2.02.111-1)
    [2014-09-03 00:48] [PACMAN] upgraded cryptsetup (1.6.5-2 -> 1.6.6-1)
    [2014-09-03 00:48] [PACMAN] upgraded firefox (31.0-1 -> 32.0-1)
    [2014-09-03 00:48] [PACMAN] upgraded gstreamer (1.4.0-1 -> 1.4.1-1)
    [2014-09-03 00:48] [PACMAN] upgraded gst-plugins-base-libs (1.4.0-1 -> 1.4.1-1)
    [2014-09-03 00:48] [PACMAN] upgraded gst-plugins-base (1.4.0-1 -> 1.4.1-1)
    [2014-09-03 00:48] [PACMAN] upgraded icedtea-web (1.5.1-2 -> 1.5.1-3)
    [2014-09-03 00:48] [ALPM-SCRIPTLET] Installing multiple non-conflicting Java environments is now supported
    [2014-09-03 00:48] [ALPM-SCRIPTLET] Check the following wiki section for more info:
    [2014-09-03 00:48] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Java
    [2014-09-03 00:48] [ALPM-SCRIPTLET] Please make sure JAVA_HOME is set to /usr/lib/jvm/default
    [2014-09-03 00:48] [ALPM-SCRIPTLET] If not, you may have to logout and login again to set it according to /etc/profile.d/jre.sh
    [2014-09-03 00:48] [PACMAN] upgraded java-common (1-5 -> 1-6)
    [2014-09-03 00:48] [PACMAN] upgraded kdebase-katepart (4.14.0-1 -> 4.14.0-2)
    [2014-09-03 00:48] [PACMAN] upgraded kdesdk-kate (4.14.0-1 -> 4.14.0-2)
    [2014-09-03 00:48] [PACMAN] upgraded libnm-glib (0.9.10.0-2 -> 0.9.10.0-4)
    [2014-09-03 00:48] [PACMAN] upgraded libtar (1.2.20-1 -> 1.2.20-2)
    [2014-09-03 00:48] [PACMAN] upgraded linux-firmware (20140603.a4f3bc0-1 -> 20140828.13eb208-1)
    [2014-09-03 00:48] [PACMAN] upgraded lvm2 (2.02.109-2 -> 2.02.111-1)
    [2014-09-03 00:48] [PACMAN] upgraded minidlna (1.1.3-2 -> 1.1.4-1)
    [2014-09-03 00:48] [PACMAN] upgraded networkmanager (0.9.10.0-2 -> 0.9.10.0-4)
    [2014-09-03 00:48] [PACMAN] upgraded openslp (1.2.1-7 -> 2.0.0-1)
    [2014-09-03 00:48] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2014-09-03 00:48] [PACMAN] upgraded pacman-mirrorlist (20140823-1 -> 20140901-1)
    [2014-09-03 00:48] [PACMAN] upgraded ppp (2.4.6-2 -> 2.4.7-1)
    [2014-09-03 00:48] [PACMAN] upgraded pygobject2-devel (2.28.6-10 -> 2.28.6-11)
    [2014-09-03 00:48] [PACMAN] upgraded python2-gobject2 (2.28.6-10 -> 2.28.6-11)
    [2014-09-03 00:48] [PACMAN] upgraded python2-pyenchant (1.6.5-3 -> 1.6.6-1)
    [2014-09-03 00:48] [PACMAN] upgraded systemd-sysvcompat (216-1 -> 216-3)
    [2014-09-03 00:48] [PACMAN] upgraded thunderbird (31.0-1 -> 31.1.0-1)
    [2014-09-03 00:48] [PACMAN] upgraded virtualbox (4.3.14-3 -> 4.3.14-4)
    [2014-09-03 00:48] [PACMAN] upgraded webkitgtk2 (2.4.4-1 -> 2.4.5-1)
    [2014-09-03 00:48] [ALPM-SCRIPTLET] To autostart xbmc standalone read: https://wiki.archlinux.org/index.php/Xbmc#Autostarting_at_boot
    [2014-09-03 00:48] [PACMAN] upgraded xbmc (13.2-2 -> 13.2-3)
    [2014-09-03 00:48] [PACMAN] upgraded youtube-dl (2014.08.29-1 -> 2014.09.01.2-1)
    [2014-09-03 00:48] Exited with code 0
    [2014-09-03 08:23] [PACMAN] Running 'pacman -S mythes-en'
    [2014-09-03 08:24] [PACMAN] installed mythes-en (20060306-3)
    [2014-09-03 08:24] Exited with code 0
    [2014-09-03 08:25] [PACMAN] Running 'pacman -S hyphen-en'
    [2014-09-03 08:25] [PACMAN] installed hyphen-en (2.8.7-2)
    [2014-09-03 08:25] Exited with code 0
    [2014-09-04 23:07] [PACMAN] Running 'pacman -Syu'
    [2014-09-04 23:07] [PACMAN] synchronizing package lists
    [2014-09-04 23:07] [PACMAN] starting full system upgrade
    [2014-09-04 23:07] [ALPM-SCRIPTLET] Installing multiple non-conflicting Java environments is now supported
    [2014-09-04 23:07] [ALPM-SCRIPTLET] Check the following wiki section for more info:
    [2014-09-04 23:07] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Java
    [2014-09-04 23:07] [ALPM-SCRIPTLET] Please make sure JAVA_HOME is set to /usr/lib/jvm/default
    [2014-09-04 23:07] [ALPM-SCRIPTLET] If not, you may have to logout and login again to set it according to /etc/profile.d/jre.sh
    [2014-09-04 23:07] [PACMAN] upgraded java-common (1-6 -> 1-7)
    [2014-09-04 23:07] [PACMAN] upgraded libmediainfo (0.7.69-1 -> 0.7.70-1)
    [2014-09-04 23:07] [PACMAN] upgraded mediainfo (0.7.69-1 -> 0.7.70-1)
    [2014-09-04 23:07] [PACMAN] upgraded tcpdump (4.6.1-1 -> 4.6.2-1)
    [2014-09-04 23:07] [PACMAN] upgraded youtube-dl (2014.09.01.2-1 -> 2014.09.04.3-1)
    [2014-09-04 23:07] Exited with code 0

  • Logging boot messages

    I'm looking for a way to log boot messages in a file.
    Could found many threads on the forum, and this wiki thread about it, but they just say how to avoid clearing TTY1 after the boot, while I'd prefer to log messages somewhere.
    Could also read that logging is not trivial because file systems are mounted read-only during boot.
    Is there any workaround to this?
    Couldn't we simply store boot messages in memory and flush them out in a file just when the booting process is done?

    @thisoldman
    This is a sample of what's in in my /var/log/boot file.
    I see no evidence of the current errors I see when rebooting, but admittedly, it may be there in some form and I just don't recognize it.
    I recall setting something, somewhere, to log additional info to this file, so that may also be a factor.
    Sun Jun 26 16:29:32 2011:
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting UDev Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mTriggering UDev uevents^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Modules^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mWaiting for UDev uevents to be processed^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mBringing up loopback interface^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mChecking Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m root-new: clean, 151452/1346400 files, 975546/5375742 blocks
    Mon Jun 27 11:21:33 2011: /var: clean, 30796/993568 files, 294895/3968047 blocks
    Mon Jun 27 11:21:33 2011: /-/-/pacman/pkg: clean, 1931/928416 files, 1135350/3711007 blocks
    Mon Jun 27 11:21:33 2011: home-new: clean, 149181/7815168 files, 15714186/31256457 blocks
    Mon Jun 27 11:21:33 2011: ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Local Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mActivating Swap^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 18:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mConfiguring Time Zone^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRemoving Leftover Files^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Hostname: Arch2010p5^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Locale: en_US.UTF-8^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Consoles to UTF-8 mode^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[%G^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Keyboard Map: us^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:33 2011: INIT: Entering runlevel: 5
    Mon Jun 27 11:21:33 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mAdjusting Hardware Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:34 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting System Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:36 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Syslog-NG^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:36 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting D-BUS system messagebus^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:36 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting NetworkManager^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:37 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Network Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:37 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Cron Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:37 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRestoring ALSA Levels^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 11:21:37 2011:
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting UDev Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mTriggering UDev uevents^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Modules^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mWaiting for UDev uevents to be processed^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mBringing up loopback interface^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mChecking Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m root-new: clean, 151447/1346400 files, 975534/5375742 blocks
    Mon Jun 27 12:18:49 2011: /var: clean, 30797/993568 files, 294962/3968047 blocks
    Mon Jun 27 12:18:49 2011: /-/-/pacman/pkg: clean, 1931/928416 files, 1135350/3711007 blocks
    Mon Jun 27 12:18:49 2011: home-new: clean, 149259/7815168 files, 15714519/31256457 blocks
    Mon Jun 27 12:18:49 2011: ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Local Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mActivating Swap^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 19:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mConfiguring Time Zone^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:49 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRemoving Leftover Files^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:50 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Hostname: Arch2010p5^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:50 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Locale: en_US.UTF-8^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:50 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Consoles to UTF-8 mode^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[%G^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:50 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Keyboard Map: us^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:50 2011: INIT: Entering runlevel: 5
    Mon Jun 27 12:18:50 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mAdjusting Hardware Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:50 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting System Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:52 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Syslog-NG^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:52 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting D-BUS system messagebus^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:52 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting NetworkManager^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:53 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Network Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:53 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Cron Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:53 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRestoring ALSA Levels^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 12:18:53 2011:
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting UDev Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mTriggering UDev uevents^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Modules^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mWaiting for UDev uevents to be processed^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mBringing up loopback interface^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mChecking Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m root-new: clean, 151452/1346400 files, 975540/5375742 blocks
    Mon Jun 27 13:36:20 2011: /var: clean, 30801/993568 files, 295031/3968047 blocks (check in 5 mounts)
    Mon Jun 27 13:36:20 2011: /-/-/pacman/pkg: clean, 1931/928416 files, 1135350/3711007 blocks
    Mon Jun 27 13:36:20 2011: home-new: clean, 149311/7815168 files, 15714716/31256457 blocks (check in 5 mounts)
    Mon Jun 27 13:36:20 2011: ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Local Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mActivating Swap^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 20:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mConfiguring Time Zone^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:20 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRemoving Leftover Files^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:21 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Hostname: Arch2010p5^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:21 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Locale: en_US.UTF-8^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:21 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Consoles to UTF-8 mode^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[%G^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:21 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Keyboard Map: us^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:21 2011: INIT: Entering runlevel: 5
    Mon Jun 27 13:36:21 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mAdjusting Hardware Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:21 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting System Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:23 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Syslog-NG^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:23 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting D-BUS system messagebus^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:23 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting NetworkManager^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:24 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Network Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:24 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Cron Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:24 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRestoring ALSA Levels^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 13:36:24 2011:
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting UDev Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mTriggering UDev uevents^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Modules^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mWaiting for UDev uevents to be processed^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mBringing up loopback interface^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mChecking Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m root-new: clean, 151455/1346400 files, 975543/5375742 blocks
    Mon Jun 27 17:07:39 2011: /var: clean, 30801/993568 files, 295104/3968047 blocks (check in 4 mounts)
    Mon Jun 27 17:07:39 2011: /-/-/pacman/pkg: clean, 1931/928416 files, 1135350/3711007 blocks
    Mon Jun 27 17:07:39 2011: home-new: clean, 149579/7815168 files, 15731339/31256457 blocks (check in 4 mounts)
    Mon Jun 27 17:07:39 2011: ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Local Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mActivating Swap^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Tue Jun 28 00:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mConfiguring Time Zone^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRemoving Leftover Files^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Hostname: Arch2010p5^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Locale: en_US.UTF-8^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Consoles to UTF-8 mode^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[%G^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Keyboard Map: us^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:39 2011: INIT: Entering runlevel: 5
    Mon Jun 27 17:07:40 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mAdjusting Hardware Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:40 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting System Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:42 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Syslog-NG^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:42 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting D-BUS system messagebus^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:42 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting NetworkManager^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:43 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Network Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:43 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Cron Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:43 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRestoring ALSA Levels^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 17:07:43 2011:
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting UDev Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mTriggering UDev uevents^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Modules^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mWaiting for UDev uevents to be processed^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mBringing up loopback interface^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mChecking Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m root-new: clean, 151484/1346400 files, 975564/5375742 blocks
    Mon Jun 27 23:32:12 2011: /var: clean, 30801/993568 files, 295174/3968047 blocks (check in 3 mounts)
    Mon Jun 27 23:32:12 2011: /-/-/pacman/pkg: clean, 1936/928416 files, 1136808/3711007 blocks
    Mon Jun 27 23:32:12 2011: home-new: clean, 151671/7815168 files, 15654514/31256457 blocks (check in 3 mounts)
    Mon Jun 27 23:32:12 2011: ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Local Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mActivating Swap^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Tue Jun 28 06:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mConfiguring Time Zone^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRemoving Leftover Files^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Hostname: Arch2010p5^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Locale: en_US.UTF-8^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting Consoles to UTF-8 mode^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[%G^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:12 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mLoading Keyboard Map: us^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:13 2011: INIT: Entering runlevel: 5
    Mon Jun 27 23:32:13 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mAdjusting Hardware Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:13 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mSetting System Clock^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:15 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Syslog-NG^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:15 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting D-BUS system messagebus^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:15 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting NetworkManager^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:16 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mMounting Network Filesystems^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:16 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mStarting Cron Daemon^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m
    Mon Jun 27 23:32:16 2011: ^[[0;10m^[[1m^[[34m:: ^[[0;10m^[[1mRestoring ALSA Levels^[[0;10m ^[[s^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[36mBUSY^[[0;10m^[[1m^[[34m]^[[0;10m ^[[71G ^[[0;10m^[[1m^[[34m[^[[0;10m^[[1mDONE^[[0;10m^[[1m^[[34m]^[[0;10m

  • Displaying boot messages besides dmesg everything.log

    Hi,
    I'm on a fully updated Arch 64b/KDE.
    During the pre-graphic boot process I can see several lines indicating a problem with alsa, yet these lines disappear too fast to read them.
    After graphically logging in sound works.
    Neither dmesg nor everything log display any alsa problems.
    Is there a way to either slow the display of the boot messages or capture them/the screen for later analysis?
    Thanks

    Maybe not the perfect solution but there is also something in the wiki:
    Disable_Clearing_of_Boot_Messages

  • Issues with passing boot messages to Plymouth - absolutely no results!

    Lately I've made it my little project to fancy up my box with a nice Plymouth boot screen with scrolling boot messages.  I've found the following two pages that give a guide to setting up such a Plymouth theme:
    Plymouth: Create your own splash screen with scrolling boot messages
    Plymouth pulsating crunchbang logo with boot messages and progress bar
    I quickly realized when I tried to make the system changes needed to send boot messages to Plymouth that my system doesn't have either  /usr/share/initramfs-tools/scripts/functions (which I believe is very outdated) or /lib/lsb/init-functions which is brought up in the #! forums.  I'm assuming that #! uses Linux Standard Base and Arch does not - so I went looking for the files I needed.
    The two most likely candidates to me seem to be /lib/initcpio/init_functions and /lib/initcpio/functions.  However, changing either one of these files to contain
    if [ -x /bin/plymouth ]; then
    /bin/plymouth update --status="$@"
    fi
    or its equivalent produces absolutely no results on reboot, even after running
    mkinitcpio -p linux
    Are these the correct files?  Or am I barking up the wrong tree?  I've already tested my Plymouth theme by running the Plymouth daemon and opening up a splash screen in X and using Plymouth's --update=<string> option, and everything works great.  I'm kind of at my wit's end, and would rather not have to install LSB to get this working.  Has anyone else been successful with this, or perhaps knows which direction to point me in?
    Thanks in advance for any advice!!

    Bump.
    ^  No, only joking! 
    I'm posting again to say that I have found /etc/rc.d/functions - and this seems to be the file I'm looking for.  Maybe someone could confirm that before I start mucking around with a file that looks a little to easy to mess up?  And maybe perhaps someone knows and easier way to edit this for sending messages to Plymouth other then putting something similar to
    if [ -x /bin/plymouth ]; then
    /bin/plymouth update --status="$@"
    fi
    into every function (such as status(), stat_fail(), stat_done(), etc.)  I see that /etc/rc.d/functions is called by /etc/rc.sysinit.  Could I possibly change rc.sysinit to be
    #!/bin/bash
    # /etc/rc.sysinit
    . /etc/rc.conf
    # Call functions for Plymouth
    . /etc/rc.d/plymouth_functions
    . /etc/rc.d/functions
    ## Truncated ##
    And then create a /etc/rc.d/plymouth_functions file very similar to /etc/rc.d/functions, except running "plymouth update --status=$@" instead of echo commands?  Then it would be a simple matter of using gEdit's Replace tool (i.e.  "status() ==> status() & plymouth_status()") to edit /etc/rc.sysinit.
    Any ideas on whether or not this would work?

  • Boot Messages In Plymouth

    I have plymouth working correctly but I noticed that for this arch theme I'm using called wave (goes from a blue drop of water to the Arch logo on a black background) the boot messages display one by one in the upper left-hand corner when shutting down yet it doesn't display anything when its booting up. Is this normal or is it theme based? I don't really know anything about Plymouth, I just got it working a few days ago.
    Last edited by brando56894 (2011-06-08 22:04:07)

    ygoreus wrote:
    I had a problem like this a few days ago:
    If you are using the plymouth from the official repos then it is a bug in plymouth version 0.9.., if you install plymouth-legacy 0.8.8-2 (https://aur.archlinux.org/packages/plymouth-legacy/) from the AUR the bug isn't present and it should work.
    Thanks so much man it totally fixed the problem! I wonder why the newest version of plymouth doesn't work on laptop, it is pretty new. Hmm. Anyways I can boot but gdm-plymouth.service gets stuck on waiting for plymouth boot screen to end but regular gdm works fine, so I'll stick with that. Thanks for your help!

Maybe you are looking for