[Solved] MSI CX70-ONF how enable VT-x

Hi
im looking to enable VT-x on notebook CX70-ONF
This is what ive got from CPU-z
On official MSI page i didint even found any bios update for this model. How can i enable VT-x?
regards
Artur

Nope VT-x is already enabled, and since you are no need modded bios.
you can ask at proper section: https://forum-en.msi.com/index.php?board=66.0
or >>How to contact MSI.<<

Similar Messages

How enable Security Section and Features on pwa sharepoint 2013

Dear Friends
how enable all Features "Security Section and Features" on site project server 2013 "PWA" SITE
I did Type Command
set-spprojectpermissionmode
Mode ProjectServer and Mode sharepoint
but Not appear Security Section in PWA Settings
how im Fix a Problem :(( Tanks a milion

Hi Tahere,
I understand that you want to know how to enable all properties pwa setting like this Database Admin in PWA Setting.
However, it is better to have one question one thread, then it will help others who have the same question as the original one can solve their problem too.
In the meanwhile, as this issue is regarding to Project Server, I recommend to post your issue in Project forum:
https://social.technet.microsoft.com/Forums/office/en-US/home?forum=projserv2010setup.
More experts will assist you, then you will get more information relation to Project server.
In addition, if you think the answer above is helpful, please mark it as an answer and it will help others who have the same issue.
Best regards.
Thanks
Victoria Xia
TechNet Community Support

[REQ] VT-X & NVidia Optimus - MSI CX70 0ND

Hello,
I need VT-X enabled on my laptop for school purpose, and basically I want to force-use my nvidia card instead of both the cards.
Is there a specific amount of donation required for such an action, or will any reasonable amount do?
my laptop:
MSI CX70 0ND
BIOS: E1755IMS.30H
FW: 1755EMS1 4.07
Thank you in advance.

Quote from: halfdead on 19-November-13, 01:27:53
well, thats fine then..
what about virtualization?
or what about unlocking the entire bios?
Thanks for your quick response.
virtualization is possible
Quote
Is there a specific amount of donation required for such an action, or will any reasonable amount do?
will any reasonable amount will be fine, its left to people to decide and what suits best

MSI z77A-G43 C1E enabled and strange noise from cpu area ?

MSI z77A-G43 C1E enabled and strange noise from cpu area ? What will be the problem? When I disabled it there is no sound. BUt when I enabled it there is a strange noise while moving my mouse cursor or when there is some CPU activity, sounds like a squeeking or scratching, a bit like hdd activity, but barely noticeable. It looks like it's coming from the area around the cpu socket, must be something on the motherboard. is there a solution other than just disabling it? I want to be able to make C1E enable but cant bare this noise so I have to turn it of....

Sound like some electrical sound produced by current going through that area.
Try contacting MSI support for more help.
>>How to contact MSI.<<

[solved] MSI GeForce GTX 560Ti

Ok, I'm sorry to make my debut on this forum a cry for help, but here it goes.
Just bought a MSI GeForce GTX 560Ti as my old card said goodbye with flickering colors and Code 43 error.
Uninstalled the old drivers, removed the old card, slotted in the new one, powered up and was hoping for the best. The result? Nothing.
Nothing but beeps from the BIOS (2+8), and a screen who wont react at all. Just goes off in to power saving mode.
Any ideas?
EDIT: I'm so stupid, I should have been required to carry a license. Problem solved by myself.

Quote from: haalbe on 08-September-11, 03:16:43
EDIT: I'm so stupid, I should have been required to carry a license. Problem solved by myself.
How? Someone might make the same error and your solution may help.

In Office 2011 the function "share it by e-mail" seems to be disabled. that happened recently, just after the apple update regarding Java. Any idea on how enable this function again?

in Office 2011 the function "share it by e-mail" seems to be disabled. that happened recently, just after the apple update regarding Java. Any idea on how enable this function again?

I was able to get to a support person who helped me fix this without charge. I guess it was my bad for not trying the right way to access support.
Anyway, they answer is this.
I had to create a new account on my computer. When I logged into the new account it immediately wanted an AppleID. I used my daughter's e-mail address for the AppleID. This setup the internet accounts correctly with her iCloud.com e-mail address. I was then able to access e-mail in both the browser and Mail. Not that complicated but nothing that I would have easily thought up on my own.
Thank Apple Support!

MSI CX70 freezes (?)

Good afternoon everybody,
Since 2 days I'm facing quite a big problem with my ( not even 1y old ) MSI CX70 laptop.
Whenever I run windows I'm able to use my laptop for a random amount of time before Windows simply freezes.
The taskbar freezes, I can't start anything and at this very moment, HD tune gets stuck aswell making my laptop pretty useless.
Things I already tried:
- Windows reinstallation ( tried Windows 8.1, 8 and 7 ( x64 legit MSDN ) )
- Removed my SSD and tested it in another computer ( is working fine )
- Removed my HDD and tested it in another computer ( is working fine )
- Executed chkdsk multiple times
- Executed sfc /scannow multiple times.
- Resetted BIOS to "optimized defaults"
- Unplugged the battery for 5 minutes
- Memtestx86 ( RAM seems fine )
- Disabled dynamic tick ( was listed as a solution by microsoft )
- Tried clean booting ( no effect )
- Tried installed as much as Windows updates as possible ( no effect )
- Tried installing ALL drivers for the installed Windows version ( no effect )
My MSI CX70 laptop has the following hardware:
- Intel Core i5-3210M
- Nvidia Geforce 640M ( and Intel interegrated GFX 4000 )
- 8GB ram
- 1TB HDD and 1 SSD ( replaced DVD drive with SSD )
And a custom BIOS I "bought" from here is flashed at this very moment.
Problem description:
After 2 days now Windows gets stuck after a random amount of use-time.
The taskbar simply doesn't respond anymore, and all opened programs get stuck.
That being said, when I plugin my USB3.0 flashdrive in my USB3.0 port, the drive does NOT get recognized by Windows ( but connecting a mouse is working just fine.. And connecting the flashdrive in any other 2.0 port is working just fine aswell )
I listed the things I could think of above, but nothing I did fixed my problem.
Did anybody else have such a problem?
Is anybody able to help me out with my problem?
Thank you kindly.

I just found this in my event viewer.. I didn't see it before.
Code: [Select]
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="Application Error" />
<EventID Qualifiers="0">1000</EventID>
<Level>2</Level>
<Task>100</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-04-25T13:19:44.000000000Z" />
<EventRecordID>207</EventRecordID>
<Channel>Application</Channel>
<Computer>Notebook-1337</Computer>
<Security />
</System>
- <EventData>
<Data>Explorer.EXE</Data>
<Data>6.2.9200.16384</Data>
<Data>50107dbc</Data>
<Data>ntdll.dll</Data>
<Data>6.2.9200.16384</Data>
<Data>5010acd2</Data>
<Data>c000041d</Data>
<Data>0000000000006433</Data>
<Data>7dc</Data>
<Data>01cf6086b25586ae</Data>
<Data>C:\Windows\Explorer.EXE</Data>
<Data>C:\Windows\SYSTEM32\ntdll.dll</Data>
<Data>437a0e46-cc7c-11e3-be68-8c89a50102a3</Data>
<Data />
<Data />
</EventData>
</Event>

How enable remote desktop gateway manager server 2012 essentials

how enable remote desktop gateway manager

There is a DISM command,
dism /online /disable-feature:Gateway-UI
http://support.microsoft.com/kb/2472211/en-us
Robert Pearman SBS MVP
itauthority.co.uk |
Title(Required)
Facebook |
Twitter |
Linked in |
Google+

Regarding how enable plant stock and storage location view

hi all:
   Could you please tell me how enable plant stock and storage location view for MM01?
   couldn't be better if there are detailed steps .
   Thank you very much!

Hi,
The views depend to material type. So you need update in the material type attributes.
SPRO - Logistic General - Material Master - Basic Settings - Material Types - Define Attributes of Material Types
Double click on the material type and update the views in 'User Departments'.
Thanks.

[Troubleshoot] MSI Gaming 7 ~ How to enable XMP with HyperX Fury RAM?

Hi folks,
First time posting here and new to the MSI brand with a Gaming 7 and MSI GTX 970 Gaming 4G GPU. They are quite awesome so far.
Anyway, I'm also new to the intel world after using AMD chips for the past number of years and I am wondering what is this buzz about XMP profiles? My new RAM sticks support XMP according to their website. But I'm not sure how to enable them in the UEFI Bios. Videos show that there should be a button right above the GENIE OC but I dont see one. Can someone help me understand how to enable it?
Spec info:
Intel 4790k
Gaming 7 Motherboard
HyperX Fury RAM, 2x8GB (16GB) 1866mhz
EDIT: I cannot share external links but if you search xmp hyperx certifications you'll see that the RAM is XMP ready.
Thanks!

Quote from: rp00 on 03-June-15, 22:47:43
but if you set your mem settings to auto, it should pick up 1866 speed from SPD
Check with CPU-Z
Such is not possible. Programmed SPD settings to be used depend on the abilities of the memory controller (here means the cpu) used. The maximum specified memory support of an i7 4790K is DDR3 and DDR3L 1333/1600 (http://ark.intel.com/products/80807/Intel-Core-i7-4790K-Processor-8M-Cache-up-to-4_40-GHz). It is therefor impossible to run memory without an XMP extension (like the Fury sticks) on the platform in question above ddr3 1600 without setting speeds and timings manually.

[SOLVED]PC Speaker (buzzer) - how to enable it?

I know it's strange, but I like PC speaker (buzzer) beep event sound. In almost every new live distro I tried, I hear that horrible beep emulation through sound card and external speakers.
Is there any way to fix this?
I tried Arch Linux 2009.02 on my other computer (Gigabyte GA-31M-S2L, G31 chipset), and there I hear beep on buzzer, but on my main machine (Intel Bad Axe2, 975X chipset) I hear beep through sound card. I also tried old Arch 2007.05 cd on main machine, and than I hear beep on buzzer, the way it should be.
Is there something broken between new kernel's and snd-hda-intel module (Sigmatel) or something?
I put pcspkr in modules list /etc/rc.conf, but that doesn't help.
Reason why I like pc speaker is, because I like beep in console, terminal, vi, incoming new mail etc., to get some input information from my machine, to not be dependent on wav sounds and external speakers.
Last edited by archiebald (2009-08-27 17:00:00)

I have found who is guilty for this irritating beep emulation crap. It is in Device Drivers>Sound Card Support (NEW)>Advanced Linux Sound Architecture (NEW)>PCI sound devices>Intel HD Audio (NEW)>Support digital beep via input layer (NEW), section of Linux kernel configuration. It is Y by default. I suggest to turn this crap to N by default, because nobody (i presume) uses this s*it, especially when is so irritating.
Generic sound devices (NEW)>PC - speaker support (READ HELP!) (NEW) have nothing to do with beep noise. It can be only N or M.
Support digital beep via input layer SND_HDA_INPUT_BEEP
Say Y here to build a digital beep interface for HD-audio
driver. This interface is used to generate digital beeps.
Thanks Wintervenom for your suggestion.
Last edited by archiebald (2009-08-27 17:05:17)

MSI P45 NEO3 + Q8200: Enabling Virtualization?

My system is:
MSI P45 NEO3 (BIOS AMI 2.61)
Intel Q8200
I have tried for the last hour to download a newer BIOS version but the website is down.
I am running ESXi 4.0 and when I try to create a 64 server 2003 virtual machine it tells me that my host does not support 64 bit, please enable VT
The processor supports it, please tell me how it has been solved since it seems to have been in PM's.
Many thanks

Quote
The processor supports it
No, it doesn't. The Intel Q8200 Quad Core Processor does not support Virtualization Technology:
http://www.intel.com/products/processor/core2quad/specifications.htm
http://ark.intel.com/Product.aspx?id=36547
As long as you use a Q8200 you will be unable to take advantage of VT (no matter what board or BIOS you use). The only way to solve this is to install a processor that supports VT.
One more thing:
Quote
MSI P45 NEO3 (BIOS AMI 2.61)
That is not your BIOS Version. To check your current BIOS Version, please look under Standard CMOS Features -> System Information in the BIOS Setup.
Quote
I have tried for the last hour to download a newer BIOS version but the website is down.
No BIOS Update will make your Q8200 support VT. The CPU simply does not support this feature.
Quote
please enable VT
Impossible.

No virtu support in msi z77a gd55: how to use quick sync then?

Hello there,
Being unaware at purchase time, i wonder how can i use quick sync of intel when in d-mode with z77A GD55? I ask this because no lucid hydra/virtu from msi download page. I know the cd contains it but it is not offered to be installed since the board is not lucid signed. If i force install it, the software runs in trial mode which is because of no license from the board. Are the virtu and virtu mvp actually different program? If no virtu support so whats the deal with bios settings to control lucid virtu?
Please help, it is with this issue that i have lost confidence using msi board (based on the fact that overclocking sucks too since the latest bios 1.3 vdroop control is useless and no offset voltage). So if this can be solved, i have some positive point to at least retain the board as my own. Thanks.

Quick sync is not a replacement for Virtu. They are two different products.
Quick sync transcodes movies using the Intel IGPU.
http://www.anandtech.com/show/4083/the-sandy-bridge-review-intel-core-i7-2600k-i5-2500k-core-i3-2100-tested/9
Quote
Currently Intel’s Quick Sync transcode is only supported by two applications: Cyberlink’s Media Espresso 6 and Arcsoft’s Media Converter 7. Both of these applications are video to go applications targeted at users who want to take high resolution/high bitrate content and transcode it to more compact formats for use on smartphones, tablets, media streamers and gaming consoles. The intended market is not users who are attempting to make high quality archives of Blu-ray content. As a result, there’s no support for multi-channel audio; both applications are limited to 2-channel MP3 or AAC output. There’s also no support for transcoding to anything higher than the main profile of H.264.
Quote
With Virtu you end up with is a system that should run all 3D games on your discrete GPU, and run all video decoding and encoding on SNB's GPU. Since this isn't switchable graphics but rather a form of GPU virtualization you can actually run iGPU and dGPU applications at the same time (e.g. you can watch a movie in one window on the iGPU and play a game in another on the dGPU).
http://www.anandtech.com/show/4199/lucids-virtu-enables-simultaneous-integrateddiscrete-gpu-on-sandy-bridge-platforms

[SOLVED] MSI GT70 keyboard buttons not working

Hi! I am a normal user of computers that like games, so I bought this awesome notebook MSI GT70 i7 16gb ram GTX 675MX 128ssd+750hdd, with a keyboard by steelseries.
Everything was ok, using the notebook as came when I bought, with OS windows 8, with no format nor modifications by me, using it since January 2013.
The problem is that about 1 or 2 weeks some shortcuts of keyboard arent working anymore:
- Wifi button isn't working and isn't becoming orange when pressed, and Fn+F8 isn't working either;
- Screen shutdown button is becoming orange when pressed but not working;
- Cd-dvd eject button is becoming orange when pressed but not working;
- I tried also Fn+F9 and Fn+F12 shortcuts, and I think they arent working either.
At the same time, the Cooler button and the Backlight's Keyboard button are working correctly. Turbo button maybe is working too but I don't know if something become overclock when I activate it.
I would really appreciate some help, since I love my notebook very much, and I hope it's not a hard problem to solve.
Thanks!

Quote from: flobelix on 10-July-13, 00:47:56
Try resetting EC: >>How to reset the EC (Embedded Controller)<<
If that doesN't help uinstall SCM and after reboot install latest version: http://www.msi.com/service/download/utility-19670.html
Also try updating .Net Framework 4.5: http://www.microsoft.com/en-us/download/details.aspx?id=36377
Hi,
I followed your advice:
1. uninstalled SCM, restarted
2. installed SCM, restarted
3. tried to update .net framework, had it already
4. resat the EC
But unfortunately it did not change my GE60 2OC's behaviour: when i press the back-light button it opens my browser with dragoonarmy/msi.com>/ BUT NO LIGHT.
Do anybody have a suggestion to solve this??
Thanks Kurt

How Enable Virtualization Technology in HP Mini 110

How to enable Virtualization Technology in HP Mini 110 ?
I want to install some OS in VirtualBox, And i want to enabled VT for share 2 CPU. Generally, this can be enabled in BIOS but HP Mini BIOS does not have any option to do this. Even i was update my BIOS.
I would like to know the way to enable VT on my HP MINI 110, Intel Atom N570 1.66 GHz processor.
Thanks in advance.
This question was solved.
View Solution.

The Atom N570 processor does not have VT, so it is not possible
http://ark.intel.com/products/55637

[Solved] MSI CX70-ONF how enable VT-x

Similar Messages

Maybe you are looking for