[SOLVED]MSI P31 Neo -mobo and strange network problems

I can't get network to work properly with this MSI-mobo's integrated lan chip.
When I boot from Arch install cd r8169-module is loaded and I can get ip via dhcp. Strange thing is that I can access http but not ftp. When I change transfermode to passive from links ftp works. But during Arch install setup I can't access the repos.
When I boot to Arch after install network doesn't work at all. Only thing I get is resolv-errors when I try to use wget or pacman. R8169 module is loaded at boot and Ifconfig shows that I have ip assigned to eth0.
I also tried with 3com's 3c509 network card that I had laying around and I have exactly same network problems with it as I have with r8169.
I am really going out of my mind with this. I have a laptop with via's network chip and I've never had any network problems with it and Arch. I haven't changed anything in my routers setup and I just tried and the networking on my laptop works just fine.
I also tried Ubuntu Hardy on this desktop machine and networking works ok. Ubuntu also loads the r8169 module as Arch does.
Last edited by Aakko (2008-05-18 21:18:29)

Quote from: techie5487 on 24-January-08, 07:34:41
UPDATE:
I tried booting with 2 RAM Chips and it works great! This seemed to be the problem.
The ram IS double sided which would explain it.
If you are wanting some more system specs, just ask and I will try and get the most I can.
Del UK:
If I could run 4gb it would be great but I cannot seem to find the SPD in bios. My BIOS is American Megatrends Inc. v02.61 so it would be great if you could help me with that!
If all else fails I might either just settle with 2GB or buy some new RAM chips. Can anyone please tell me some Ram chips which would be able to give this mobo 4GB?
Thanks
techie5487
Done
2 Gb in
Into bios
SPD off
Set to 5-5-5-15
Save settings
Power off
Install extra 2 x 1Gb modules into slots 2 & 4
Power system up
4Gb detected................. slow post not fast
3.25Gb checked
1 second delay
4096Mb
3.25Gb extend
768Mb in +4Gb
System sees 3.25Gb

Similar Messages

Problems with MSI P31 Neo mobo

Hello all,
I just received my new MSI P31 Neo motherboard today and have spent nearly the whole day trying to get it to work.
My problem is that when you turn the system on about 4/5 times there is no graphics displayed what so ever. When the graphics do come on and you can go through the BIOS it quite often jams. If occasionally you do get past that, when the Windows XP disc starts to load the files for the installer, it Jams and you need to restart, restarting this long process.
My CPU is supposed to be supported, it's a 3.6ghz Intel Pentium 4 chip. I am using 4 x Samsung Original 1024MB DDR2 PC5300 RAM though it only shows 2gb of it in the BIOS. The graphics card is a NVIDIA GeForce 7300 GT 512MB PCI-E.
Can anyone tell me how to get this mobo to work? Things to try? Otherwise I think I will just have to send it back...
techie5487

Quote from: techie5487 on 24-January-08, 07:34:41
UPDATE:
I tried booting with 2 RAM Chips and it works great! This seemed to be the problem.
The ram IS double sided which would explain it.
If you are wanting some more system specs, just ask and I will try and get the most I can.
Del UK:
If I could run 4gb it would be great but I cannot seem to find the SPD in bios. My BIOS is American Megatrends Inc. v02.61 so it would be great if you could help me with that!
If all else fails I might either just settle with 2GB or buy some new RAM chips. Can anyone please tell me some Ram chips which would be able to give this mobo 4GB?
Thanks
techie5487
Done
2 Gb in
Into bios
SPD off
Set to 5-5-5-15
Save settings
Power off
Install extra 2 x 1Gb modules into slots 2 & 4
Power system up
4Gb detected................. slow post not fast
3.25Gb checked
1 second delay
4096Mb
3.25Gb extend
768Mb in +4Gb
System sees 3.25Gb

MSI P965 Neo-F and a other problem!

Hi alls!
I have a problem with my MSI P965 Neo-F.In fact when i push the power button i have to wait 5-6 secondes for my pc turn on...
I have the same problem that Er.nest:https://forum-en.msi.com/index.php?topic=107722.0 (problem number 5)
My PSU is a Seasonic S12 II 500 W
My config is :
Core 2 Duo 6600 @ 2.40Ghz
2 Gb RAM DDR 667 Mhz Corsair(5-5-5-15 @1.85V)
ATI HD 2900 XT 512 Mb
HD Seagate 320 Gb
Thanks...

ok v1.10 .. so we have same version now.. (maybe it will help us to find somthing helpful)
So (i dont know if you know somthing about..let me to refresh about S3).. S3 is one of two most used sleep modes. S3 (STR) - Save to RAM. It save whole your session to RAM, clear the CPU registrers and turn of all devices in computer one by one... only matherboard is powered by minumal voltage of 5V. This is used to refreshing o RAM and keep content "inside". In this state is consuption of computer avg. 4-6W (...PSU). Ok, my problem is ...
When i want to wake my computer up (a do it by pushin power button) ... somthing (and i dont know which part of my machine).. cause frozen of whole machine. Sometimes i get Windows Vista login window (loggin button fully response to mouse move over), if i want to login windows fall into BSOD or all freeze... somtimes i get only black screen.
So .. it seems to be little bit different problem but we both have problems with some kind of turning on...please, try to describe more about your problem. Espesialy informations about other behavior...
for example ... if you using hybernation (possibly S3), if you turning your computer normal by windows option "turn off", if your problems dissapear when you discharge mobo from static charge (disconect power cord, and push power button), if you have other problem with restarts...
i have same problem like you before i come to v1.9 and higher ... so, maybe its only in some setting i made insensible

Probems with msi 875p neo Fis2r and network controller driver

Hi guys just wondering if anyone could help me with my msi 875p neo FIS2R and problems with the network controller driver/network card.
I'm running xp on a computer my nextdoor neighbour gave me. I got it working fine with service pack 3 installed but then installed a bunch of windows updates last night and the computer would switch itself off before windows could start. Now I reinstalled xp and unfortunately it does not recognise the network controller/card at all now. I tried installing the intel network controller drivers but it stopped because it said no intel adapter/card was installed/present. Could anyone please help with suggestions? I tried running everest and under newtwork it doesnt list intel network adapters but I'm pretty certain it is. Again any suggestions?
--------[ EVEREST Home Edition (c) 2003-2005 Lavalys, Inc. ]
Computer:
Operating System Microsoft Windows XP Professional
OS Service Pack Service Pack 3
DirectX 4.09.00.0904 (DirectX 9.0c)
Motherboard:
CPU Type Intel Pentium 4, 2800 MHz (14 x 200)
Motherboard Name MSI 875P Neo-FIS2R (MS-6758) (5 PCI, 1 AGP, 4 DDR DIMM, Audio, Gigabit LAN, IEEE-1394)
Motherboard Chipset Intel Canterwood i875P
System Memory 1024 MB (PC3200 DDR SDRAM)
BIOS Type AMI (10/11/04)
Partitions:
C: (NTFS) 238464 MB (200326 MB free)
--------[ DMI ]---------------------------------------------------------------------------------------------------------
[ BIOS ]
BIOS Properties:
Vendor American Megatrends Inc.
Version V2.4
Release Date 10/11/2004
Size 512 KB
Boot Devices Floppy Disk, Hard Disk, CD-ROM, ATAPI ZIP, LS-120
Capabilities Flash BIOS, Shadow BIOS, Selectable Boot, EDD, BBS
Supported Standards DMI, APM, ACPI, ESCD, PnP
Expansion Capabilities ISA, PCI, AGP, USB
[ System ]
System Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
Wake-Up Type Modem Ring
[ Motherboard ]
Motherboard Properties:
Manufacturer MICRO-STAR INC.
Product MS-6758
Version 00C
Serial Number 00000000
[ Processors / Intel(R) Pentium(R) 4 Processor ]
Processor Properties:
Manufacturer Intel
Version Intel(R) Pentium(R) 4 Processor
External Clock 200 MHz
Maximum Clock 4000 MHz
Current Clock 2800 MHz
Type Central Processor
Voltage 3.3 V, 2.9 V
Status Enabled
Socket Designation FC-478
Network adapters:
Direct Parallel 5.1.2535.0
WAN Miniport (IP) 5.1.2535.0
WAN Miniport (IP) - Packet Scheduler Miniport 5.1.2535.0
WAN Miniport (L2TP) 5.1.2535.0
WAN Miniport (PPPOE) 5.1.2535.0
WAN Miniport (PPTP) 5.1.2535.0

Quote from: Jack t.N. on 14-November-09, 08:00:05
Clear CMOS with your PSU unplugged from A/C power. Then load "Optimized Defaults" in BIOS and retest.
thanks jimi... jack
will try that and post later if it worked... ive never cleared cmos, this sort of thing is relatively new to me but thanks again

MSI P31 Neo and FSB/DDR ratio

I purchased P31 Neo -mb and E2160 processor.
I've red that this processor could easily hit 3.0 Ghz with 333 mhz fsb. The problem is that I can't find a setting from P31 Neo's bios that would allow to unlock FSB/DDR ratio. There is only Auto, 1:1.66 and 1:2 setting for FSB/DDR ratio. When I raise the FSB the DDR speed quickly raises over 800 Mhz and the system doesn't post. 2160 Mhz is the top that i've managed to overclock E2160 because my DDR2-chips can't handle the higher FSB speeds.
Can I do something about this or should I swap P31 Neo to some P35-chipset mobo that would allow more flexible FSB/DDR ratio settings?

Hello Aacko,
the P31 Neo is a budget board that is not really designed for overclocking (notice the red PCB). The P31 chipset supports DDR2-667 and DDR2-800 memory modules. With a FSB-200-MHZ-CPU installed, 1:1.66 and 1:2 are exactly the ratios you need to get your RAM to 667 MHz or 800 MHz.
Quote
Can I do something about this or should I swap P31 Neo to some P35-chipset mobo that would allow more flexible FSB/DDR ratio settings?
If you really want to overclock, you should go for a P35 Platinum or P35 Neo2-FR/FIR board.

MSI P31 NEO

Hi!
I'm TyrrelCorp, and i'm from Portugal.
First of all... i apologise for my english... it's a little bit "rusty".
So... the problem:
I've a MSI P31 NEO mainboard. Until now it gave no problems, but when i upgrated from 2GB memory to 4GB... it doesn't load Windows.
I've 4x1GB, 667MHz sticks.
My system is:
OS: Windows 7 Ultimate 64Bits SP1 - http://windows.microsoft.com/pt-PT/windows7/products/compare?T1=tab09
Mainboard: MSI P31 NEO - http://www.msi.com/product/mb/P31-Neo.html#Spec
Chipset: Intel P31 - http://www.intel.com/products/desktop/chipsets/p31/p31-overview.htm
CPU: Intel Core2 Duo E6300 1.86 Ghz - http://ark.intel.com/products/27248/Intel-Core2-Duo-Processor-E6300-%282M-Cache-1_86-GHz-1066-MHz-FSB%29
Memory: 4x1GB DDR2 667 MHz (2x OEM + 2x Kingstone)
HDD: Samsung 300GB SATA I/WD 1TB/WD 500GB/WD 1TB
Video: ATI Radeon HD 5450 - http://www.amd.com/br/products/desktop/graphics/ati-radeon-hd-5000/hd-5450-overview/Pages/hd-5450-overview.aspx
Sound: Realtek High Definition Audio Codecs - http://www.realtek.com/downloads/downloadsCheck.aspx?Langid=1&PNid=24&PFid=24&Level=4&Conn=3&DownTypeID=3&GetDown=false#High%20Definition%20Audio%20Codecs
Optical: LG GSA-H20L - http://www.videohelp.com/dvdwriters/lg-gsa-h20l/1561
Cooling: Artic Cooling Freezer 7 PRO REV.2 - http://hi-techreviews.com/index.php/review-links-mainmenu-80/9878-arctic-cooling-freezer-7-pro-rev-2
Powersupply: LPJ12 500 TC Silent - OEM
I've already trieded with two sticks only, 2GB... and it starts fine. All the memory sticks work fine... in pair. All four, nothing.
Thanks...

Quote from: Henry on 17-July-11, 05:38:00
"I've noticed that two of the memory sticks are single sided and the other two are dual sided! Could this be the origin for the problem?"
It seems you are using 2 high density sticks and 2 low density sticks. tRFC would certainly be different between the 2. Don't mix memory like that as you will have problems. To avoid memory problems like that ensure that all 4 are the same. Best would be 2x4 GB kit. At the very least get another kit the same as the 2 new ones and don't use the old ones.
Well... i thought memory sticks would have to be same capacity (this case, 1Gb) and same velocity, 667MHZ.
Never thought about SS or DS.
In this case... the older ones, OEM, are DS... the new ones, Kingstone, are SS... witch are better to keep and to buy new ones?

MSI P31 Neo-F V2 - Fails to Boot

I've got an MSI P31 Neo-F V2 motherboard that I've had for about about 16 months now. Unfortunately today it's just started failing to boot correctly.
I turned the machine on and was greeted with a red error message just after the usb controller was initalized. The message said "Warning !!! The previous performance of overclocking is failed and the system is restored to the default settings. Press any key except "DEL" to enter SETUP......."
I haven't overclocked the machine (don't know how) so I'm not quite sure why that error message was coming up. Anyway, I pressed space, that prompted me to restore settings which I did, then took me to setup where I saved and exited. Then tried to restart the machine. From this point on (about 30 restarts) I've had that message twice. Normally it does one of the following:
a) Powers up, no bleeps, no video output. Sits there waiting.
b) Powers up for a few seconds, then powers straight back down. Waits about 10 seconds, then repeats. Eventually after enough retries it will reach the some point as (a).
I've tried disconnecting power, I've tried taking the CMOS battery out. The last time I got to the error message my USB keyboard wouldn't even work so I couldn't do anything but restart. If anyone has any suggestions on what to do then fire away, as I'm really stuck now
I don't know what version of the BIOS I'm running as I can't get that far anymore. Apart from the CPU which I'm not sure is important? (Intel Duo 3Ghz) I'm not sure on much more info on my system.
Thanks.
Ian

Ok, I've managed to find an old photo of the Bios.
Bios: A7392IMS V2.1 080608 is the number top left.
CPU : Intel Core 2 Duo E8400 3.0Ghz
Gfx : 512Mb NiVidia GeForce 9800GTX+
Mem: 2 X 2GB DDR 2 800 MHz (will try and find out brand).
H/D : 2 * 160Gb drives. One is Seagate, the other Western Digital, both SATA 2.
OS : XP not that it's really relevant...
PSU : 800W. Don't know brand and DC current output. Will try to get these.

MSI 848P-Neo - Mobo don't start at all

Hi,
I have a MSI 848P-Neo mobo with a P4 Ht 3.0 Ghz on it. New PSU 360W Enermax (12V 26A, 5V 32A, 3.3V 32A). No HDD or CD Drive are plugged. No card in PCI slot, except VGA in AGP Slot. 1 RAM stick in slot.
When I power on the system, the D-Bracket with Diag led light as follow:
1 and 3 are red
2 and 4 are green
I check in manual for signification but this case isn't in the manual.
I don't hear beep from speaker.
Can you confirm me that is the mobo the problem ?

Have you Clear CMOS Guide yet with power cord removed from the PSU 1st?

Cant boot MSI P31 Neo v2

Hi. First of all sorry for my bad english.
So I have this PC for 1,5 years now, never had this problem before.
One day I start my pc and it shows "Warning!!! The previous performance of overclocking is failed and the system restored to the default settings...." Press del to enter setup.
So I press del and enter setup, then i use fail safe deafaults settings and exit bios. Pc starts normaly. Next time I turn it off same message came up, so i did the same fails safe deafaults, but no effect, it just restarted and again same message. So i decided to try optimized deafaults and pc started. And again next time i turned it un same message, i tried fail safe deafaults, then optimized and no effect. After about 10 times trying those setting pc started, so i googled the problem and the suggestion was to flush cmos by removing batteri. So i did. After that pc isnt starting at all, just nothing on screen, no signal. No error beeps or something like that. All coolers, cd room ect is powered, just no signal on monitor. Checked the monitor with another pc, runs normaly.
So the system specs-
Intel core E7300 2.66ghz
Msi p31 neo-f v2
A-data 1gb ddr2
A-data 1gb ddr2 (tried with one ddr only, nothing)
samsung f1 750gb sata2 7200rpm
Giga byte 512mb gddr3 pcie16 hd4850
Fortron psu atx 400w
bios - A7392IMS200
I have checked all the wire contacts,ddr slots, vga slot, removed and inserted back CPU too, no help.
Any ideas?

I would check the CPU/Ram. this system was overclocked?

Msi k8n neo plat and microsoft ie

getting my msi k8n neo plat board running satisfactory , except for one problem . when i got to amdmb.com, i start surfing the site, and after a minute or 2, i get a microsoft ie error, send the error report to microsoft, and then ie closes. what is the problem , is it with amdmb.com site? its the only site that this problem with ie is present, all other sites i don,t have this problem

just tryed using the browser firefox, and it works great. its just ie that doesn,t work on amd.mb, and only that site. wierd problem, never experienced anything like it before. had run a short memtest , no errors. the 6800gt , msi k8n neo plat and amd 64 3400 work great. get some super madonion benchmarks-all default-1024 x 768 32bit- 22,755. i was hoping for 22,000, but exceeded my expectations. can get into the 23,000 + with overclocking the 6800gt, have had it overclocked at gpu-412, memory 1.12. not sure how much more you can increase the numbers, thinking my gpu is close to the limit at 412.had a problem with windvd, it ended up being a configuration in windvd- had to enable hardware acceleration , bingo- worked great after that. got my corsair xms pc 3200 to work at 6-3-3-2 timings. still getting to know the board, there is definately a learning curve to be delt with on this board, but i am getting it to work better by the day.

Matrox Millenium P650 and MSI K8N Neo 2. Any known problems?

I got myself the incredibly cool Zalman TNN 500AF, with an Asus motherboard A8V Deluxe, AMD athlon 64 3500, 90 nm, 2 x 512 Samsung PC3200 and XP SP2, and alas the system cannot be worked with the P650 and the Asus motherboard; we have tried the latest BIOS for both graphic card and motherboard.
A friend of mine will buy the ASUS motherboard and I plan to buy an MSI K8N Neo 2 and wonder if you have experienced any problems with the particular Matrox card P650 and the MSI board. Do you know about any compatibility problems? I do not want to go through the rather compicated installing of yet another dysfunctional system.
Thank you in advance! If you like images, I share some here: www.vivotopia.org/worldcitizens (it is mainly people from all over the world)
All the best!
Stefan
Sweden

The problems with matrox is with G450/G550 .
No problems reported with p650 .
Actually a user here switched card from G550 til P650 .
https://forum-en.msi.com/index.php?topic=60807.msg494405#msg494405

MSI P965 NEO-F and power supplys

Hello, I just bought the MSI P965 NEO-F and Cooler Master iGreen 500W but when, after I unpacked it all and was about to start building, I discovered that in the manual, under the power supply tab, it says that this moderboard requires a power supply that comes with a -5V pin supply. I didn't see that when I looked in the online manual.
However, when I looked in the PSU manual I saw that there should be a -5V pin in pinnr. 20 on the ATX connector. So I was relieved. But when I looked at the ATX connector there was an empty hole where pinnr. 20 were supposed to be. Does that mean that I can't use the power supply with this moderboard?

hmm...you could replace your brand new PSU with another PSU? i don't know in your country, but here, we're allowed to replace bought items (no refund though, just replace) to another item of equal or higher value (but add money for higher value, of course )
i'm using the Hec Winpower 550W PSU on that same motherboard, and is working fine for me.
otherwise, you could go to your local PC store and have them plug everything for you? (here it costs around US $6 to ask someone to assemble everything)

P31 NEO with 4x 1Gb memory problem

Hi,
I just met the problem with my P31 NEO mobo which doesn't accept my 2 new Corsair 1Gb CM2X1024-6400C4 - 4-4-4-12 (2.10V ver6.3)
I've already have 2 Corsair 1Gb CM2X1024 - 5-5-5-12 (1.9V ver5.2) which work fine.
Is it possible to make them all work (they seem to be single-sided but not sure) ?
If yes, wich parameters need to bet set ?
Thanks a lot in advance for your answers.
Fred

You can try to set them all to 5-5-5-12 and see what happens.
Im not sure also if your memorycontroller, an ICH7, will "accept" 4x1GB @ 800MHz.
I know that some older memorycontrollers will have problems running "double" dualchannel.
My board for instance, ICH9 memorycontroller, can only operate @667 MHz when all 4 slots are occupied.
The P45 and certainly the newer models, ICH10(R) controller, can take up to 1066MHz in double dualchannel.
If 800MHz dosnt work, look with cpu-z to see what the setting would be @667MHz and adjust them accordingly and see if that works.
If that doenst work either, your probably better of buying 2x2GB.
Succes and keep us posted

MOVED: MSI P31 Neo and FSB/DDR ratio

This topic has been moved to Overclockers & Modding Corner.
https://forum-en.msi.com/index.php?topic=116635.0

Hello Aacko,
the P31 Neo is a budget board that is not really designed for overclocking (notice the red PCB). The P31 chipset supports DDR2-667 and DDR2-800 memory modules. With a FSB-200-MHZ-CPU installed, 1:1.66 and 1:2 are exactly the ratios you need to get your RAM to 667 MHz or 800 MHz.
Quote
Can I do something about this or should I swap P31 Neo to some P35-chipset mobo that would allow more flexible FSB/DDR ratio settings?
If you really want to overclock, you should go for a P35 Platinum or P35 Neo2-FR/FIR board.

Problems with msi k8n neo-2 and xfx 6800 card

is this card incompatible with the msi k8n neo-2 motherboard?
i ve got this mobo last week and when i tried to install the card to it nothing comes on screen, no beeps or nothing, ive changed the power supply, the card works fine on my old pc with both power supplies (old pc was 2500+ amd with epox 8rda+) i ve tried booting up with nothing else connected on the psu except the card itself, it still doesnt seem to work, the new motherboard works fine with my old radeon 9600 pro.
What can i do?

Thats not what I read (assuming this is the same correct model)
420W double unit
DC O/P Load Max
+5V 42 Amp.
+12V 16 Amp.
+3.3V 28 Amp.
-5V 0.5 Amp.
-12V 0.8 Amp.
+5VSB 2 Amp.
Agreed that one is 420W, but is that it or not?

[SOLVED]MSI P31 Neo -mobo and strange network problems

Similar Messages

Maybe you are looking for