[solved] MTGO wine error

anyone else have mtgo working under wine? here's what I'm currently getting.
edit: just had to install dotnet20
Last edited by Stythys (2011-05-25 11:43:04)

karol wrote:Install 'which'? http://www.archlinux.org/packages/?name=which
It's in the 'base' group and you should have the whole group installed.
Thanks

Similar Messages

How to solve Audition CS6 error "The amount of audio to burn will not fit on the CD........."?

I have a brand new PC that is MORE than adequate. I have once succeeded in burning a CD after learning all about time tracks and merging them. (made a few with only ONE track)
Two things:
1) I find that I must add a CD marker at the end of the WAV because Audition CS6 erases whatever is the last CD marker I've made. Very frustrating but now I know I have to do this but I have no idea WHY!!
2) Right now I have a WAV that is just over 1 hour and 3 minutes with a total of 637.74MB of info. When I try to export/burn a CD, I get an error message stating "The amount of audio to burn will not fit.......". I am using TDK 700MB blanks with a Pioneer Blu-ray burner.
Obviously it will fit.
What am I doing wrong, all of a sudden?

Hey ryclark,
Thanks for responding. Something else is going on here.....
Here's what I re-replied to our friend...
Thanks for the response.
When I built this computer last Nov/Dec, it was built with the second
fastest Intel 7i, quad-core chipset on an 64-bit ASUS motherboard. It's running
Win 7 Pro. It has a 500GB SSD "C" drive with another 14 TB of true hard
drive space. It is set up with 64 bit. I had been using Audition CS3 for many
years and even go back to it's origin: Cool Edit and Cool Edit Pro. My
learning curve was minimal, sans the CD burning, which I used other software
for which is now antiquated, so I need Audition for this. Between this and
IZotope 3 I've repaired and improved many a recording. All-in-all extremely
useful software.
As for the idea "to burn it anyway", well the error message comes up and
that's it - if I "X" out of that message and try to burn again the message
comes back - so Audition will not let me. It is convinced that this file is
longer than it really is, but only when I add track marks to it!
There are only 11 tracks.
I was able to burn a CD of this same file but without all the track marks,
so the same exact file length/size will burn, only as the one track.
I've also succeeded in burning other WAV's , both greater and smaller, with
and without multiple track marks, without issue. Of course all with less
than the CD's max. capacity.
This problem seems to be with this one file. I've even re-made/re-recorded
the file from scratch with no change. There's something else going on here
that I can't put my finger on. (I am "recording" LP's and making personal
CDs of them)
Also, only from time to time, I have another error after burning a CD that
states it could not verify the CD. For this I assume it is the blank rather
than AA? The first might burn without issue and with the second burn I
get the error. It is near the end of a stack of blanks, so.....
As for the need to "mark the end" of the file makes a lot of sense but of
all the other CD track-marking software I've used, none needed one to do
this, but this IS Adobe after all.
You'd think there might be a smidge of intuitiveness with Adobe, but maybe
not.
- Mark
In a message dated 8/2/2014 8:11:52 A.M. Eastern Daylight Time,
[email protected] writes:
How to solve Audition CS6 error "The amount of audio to burn will not fit
on the CD........."?
created by ryclark (https://forums.adobe.com/people/ryclark) in
Audition CS5.5, CS6 & CC - View the full discussion
(https://forums.adobe.com/message/6605916#6605916)

HOW TO SOLVE THE R6034 ERROR IN ITUNES INSTALATION

I need toknow how to solve the R6034 error in itunes instalation becouse y can´t buk up muy phone

How to solve this ?
#import <UIKit/UIKit.h>
int main(int argc, char *argv[]) {
    NSAutoreleasePool * pool = [[NSAutoreleasePool alloc] init];
   -> int retVal = UIApplicationMain(argc, argv, nil, nil);
    [pool release];
    return retVal;

How i can solve 6753 airport error

how i can solve 6753 airport error?

IIRC, it's not uncommon to spot this after a firmware update to 7.6.1. And IIRC, wasn't there a 7.6.2 release today? Unplug the express, plug it back in, and generally this should self-resolve.

How to solve the 404 error

Hi,
How to catch or solve the 404 error in application.
Some time we are giving some file name but that file is not avialable at that time it will give 404 error. how to avoid this error.
If 404 error comes i want call some other file. Is it posible.
Thanks Advance.

Yes, this is because IE 5.5 (?) and higher have this wacky "Show friendly HTTP error messages" setting. You can disable this by going to tools -> internet options -> advanced and unchecking "Show friendly HTTP error messages". However as the default IE setting has "Show friendly HTTP error messages" enabled this isn't a good solution.
I believe that if your error page is less than a certain size (in bytes) then IE defaults to it's own error page when "Show friendly HTTP error messages" are enabled. This size is something like 512 bytes or fewer in length.
So basically try making your error page larger (more than 512 bytes in size) and see if that works.

"Error 16" solution doesn't solve problem, same error message pops up. Further steps?

Steps followed: all Adobe products (CS6 Suite and CC) have been removed (w/uninstaller and manual Library cleanup) and reinstalled (from discs and downloads); permissions corrected as per KB note on Error 16, to no change. This occurred after updating Mac OS to 10.9x. The OS was then reinstalled, new admin & standard users created (MacPro hardware passes all tests). "Error 16" permission solution performed at every stage to no change in error generation. Adobe Reader, Lightroom 4, and CS6Bridge do launch, but Acrobat Professional, Photoshop (13, CS6), and CC Photoshop stop launch w/error 16. Stumped!

Thanks for the suggestion, Gene, but it had no affect on the ³error 16²
situation, I¹m afraid. I think I¹m going to have to start with a new drive
and import/update until I find the source of this issue.
Jim
"Error 16" solution doesn't solve problem, same error message pops up.
Further steps?
created by gener7 <https://forums.adobe.com/people/gener7> in Photoshop
General Discussion - View the full discussion
<https://forums.adobe.com/message/7154907#7154907>
Permissions problem. Open Terminal and copy/paste this line: sudo chmod -R
777 /Library/Application\ Support/Adobe Gene
If the reply above answers your question, please take a moment to mark this
answer as correct by visiting:
https://forums.adobe.com/message/7154907#7154907 and clicking Correct¹ below
the answer Replies to this message go to everyone subscribed to this thread,
not directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
Please note that the Adobe
Forums do not accept email attachments. If you want to embed an image in your
message please visit the thread in the forum and click the camera icon:
https://forums.adobe.com/message/7154907#7154907 To unsubscribe from this
thread, please visit the message page at
, click "Following" at the
top right, & "Stop Following" Start a new discussion in Photoshop General
Discussion by email
<mailto:[email protected]> or
at Adobe Community
<https://forums.adobe.com/choose-container.jspa?contentType=1&containerType=14
&container=4694> For more information about maintaining your forum email
notifications please go to https://forums.adobe.com/thread/1516624.
>

HT201405 how to solve time machine error-1

how to solve time machine error-1

I checked the pondini fixes and ended up doing the following - in case this could help someone else with OSX Lion and Time Capsule... http://pondini.org/TM/Troubleshooting.html
First, I downloaded and used Airport Utility 5.6 instead of 6.1 - BTW, I had to attempt download and installation THREE times before the program actually installed. Be persistant.
Pondini #5: It's possible some names (of all things!) may be a problem. See item C9. I had to re-name my Mac, Time Capsule, network, etc... to remove all apostrophes and spaces.
Pondini #7: If you have WD SmartWare installed on Lion, it's not compatible, per RoaringApps, and there are reports it can cause this problem as well. Use Western Digital's uninstaller, or delete the app from /Applications and the files com.wdc.WDDMservice.plist and com.wdc.WDSmartWareServer.plist from /Library/LaunchDaemons. There may also be a file in Library/Application Support.
I then had to shut down computer, unplug Time Capsule, unplug modem; plug everything in again, then reboot computer; then had to go to Apple- System Preferences- Network- and reselect my Time Capsule to connect to WiFi again.
Then opened Time Machine preferences again and attempted back up - it worked!

TS3297 How to solve -42110 unknown error?

Please, how can I solve -42110 unknown error?
Thanks

Try the following user tip:
iTunes for Windows 11.0.2.25 and 11.0.2.26: "Unknown error -42110" messages when launching iTunes

HT201210 pls solve my problem error 3194

pls solve my problem error 3194

Hello,
Check this:
This device is not eligible for the requested build (Also sometimes displayed as an "error 3194")
Update to the latest version of iTunes. Mac OS X 10.5.8 (Leopard) users may need to download iTunes 10.6.3.
Third-party security software or router security settings can also cause this issue. To resolve this, followTroubleshooting security software issues.
Downgrading to a previous version of iOS is not supported. If you have installed software to performunauthorized modifications to your iOS device, that software may have redirected connections to the update server (gs.apple.com) within the Hosts file. Uninstall the unauthorized modification software from the computer.
Edit out the "gs.apple.com" redirect from your hosts file, and then restart the computer for the host file changes to take affect. For steps to edit the Hosts file and allow iTunes to communicate with the update server, see iTunes: Troubleshooting iTunes Store on your computer, iPhone, iPad, or iPod—follow steps under the heading Blocked by configuration (Mac OS X / Windows) > Rebuild network information > The hosts file may also be blocking the iTunes Store. If you do not uninstall the unauthorized modification software prior to editing the hosts file, that software may automatically modify the hosts file again on restart.
Avoid using an older or modified .ipsw file. Try moving the current .ipsw file (see Advanced Steps > Rename, move, or delete the iOS software file (.ipsw) below for file locations), or try restoring in a new user to ensure that iTunes downloads a new .ipsw.
Hope it helps,

HT203200 How can i solve the -50 error when downloading video from itunes??

How can I solve the -50 error when downloading video from itunes. The apple support people cannot even figure it out!??

The 2330 error often means some sort of damage to the filing system as might happen if the battery fell out while the disk was in use.
Try running a disk check to see if it finds and fixes any errors.
http://support.microsoft.com/?kbid=315265

[Solved] was getting errors with wine, but found patched linux version

Installed wine for the first time, following the wiki and reading most of the things linked there (such as the winehq faq for disabling winemenubuilder), made separate WINEPREFIXs for 32 and 64 bit, then unzipped a program (Meritous) into the 32 bit prefix's "Program Files" and--
[solitudesands@TheEntireBracadaDesert Meritousness]$ WINEPREFIX=~/w32 wine Meritous.exe
wine: cannot find L"C:\\windows\\system32\\winemenubuilder.exe"
err:wineboot:ProcessRunKeys Error running cmd L"C:\\windows\\system32\\winemenubuilder.exe -a -r" (2)
fixme:keyboard:X11DRV_LoadKeyboardLayout L"00000409", 0080: stub!
fixme:keyboard:X11DRV_LoadKeyboardLayout L"00000409", 0001: stub!
wine: Unhandled page fault on read access to 0x00000034 at address 0x7bc3c8a1 (thread 0009), starting debugger...
At which point the bug reporting wine function pops up offering this:
Unhandled exception: page fault on read access to 0x00000034 in 32-bit code (0x7bc3c8a1).
Register dump:
CS:0023 SS:002b DS:002b ES:002b FS:0063 GS:006b
EIP:7bc3c8a1 ESP:005533c0 EBP:005533d8 EFLAGS:00010206( R- -- I - -P- )
EAX:7e64c301 EBX:7bcc7000 ECX:005533f0 EDX:7e6d7280
ESI:00000020 EDI:00000000
Stack dump:
0x005533c0: 00682af8 7bc3c896 005533f0 7e6cf000
0x005533d0: 0067fb40 00000000 00553408 7e65e39c
0x005533e0: 00553438 7e663856 7e64c301 7e65e39c
0x005533f0: 00000020 00553410 00553448 7e65e374
0x00553400: 00553420 7e6cf000 00553468 7e663e7f
0x00553410: 00682af8 00682af8 00000040 7e663e7f
000c: sel=0067 base=00000000 limit=00000000 16-bit r-x
Backtrace:
=>0 0x7bc3c8a1 RtlEnterCriticalSection+0x21() in ntdll (0x005533d8)
1 0x7e65e39c MSVCRT__lock_file+0x3b() in msvcrt (0x00553408)
2 0x7e663e7f MSVCRT_fread+0x5e() in msvcrt (0x00553468)
3 0x00401b28 in meritous (+0x1b27) (0x0067fbd8)
4 0x004213f6 in meritous (+0x213f5) (0x0067fc08)
5 0x004215b7 in meritous (+0x215b6) (0x0067fd88)
6 0x00420f0b in meritous (+0x20f0a) (0x0067fe00)
7 0x0040122d in meritous (+0x122c) (0x0067fe20)
8 0x00401258 in meritous (+0x1257) (0x0067fe30)
9 0x7b85c48c call_process_entry+0xb() in kernel32 (0x0067fe48)
10 0x7b85d54a in kernel32 (+0x4d549) (0x0067fe78)
11 0x7bc7c610 call_thread_func_wrapper+0xb() in ntdll (0x0067fe98)
12 0x7bc7f50f call_thread_func+0xde() in ntdll (0x0067ff88)
13 0x7bc7c5ee RtlRaiseException+0x21() in ntdll (0x0067ffb8)
14 0x7bc51441 call_dll_entry_point+0x440() in ntdll (0x0067ffd8)
15 0xf7553a8d wine_call_on_stack+0x1c() in libwine.so.1 (0x00000000)
16 0xf7553c0a wine_switch_to_stack+0x29() in libwine.so.1 (0xff90b0a8)
17 0x7bc56bd5 LdrInitializeThunk+0x1f4() in ntdll (0xff90b0f8)
18 0x7b8634f2 __wine_kernel_init+0x871() in kernel32 (0xff90c268)
19 0x7bc57a33 __wine_process_init+0x162() in ntdll (0xff90c2d8)
20 0xf7551643 wine_init+0x2f2() in libwine.so.1 (0xff90c348)
21 0x7bf00db2 main+0x81() in <wine-loader> (0xff90c7a8)
22 0xf738de5e __libc_start_main+0xdd() in libc.so.6 (0x00000000)
0x7bc3c8a1 RtlEnterCriticalSection+0x21 in ntdll: movl 0x14(%esi),%eax
Modules:
Module Address Debug info Name (68 modules)
PE 230000- 24a000 Deferred sdl_image
PE 400000- 473000 Export meritous
PE 10000000-10046000 Deferred sdl
PE 60400000-60475000 Deferred sdl_mixer
ELF 7b800000-7ba5a000 Dwarf kernel32<elf>
\-PE 7b810000-7ba5a000 \ kernel32
ELF 7bc00000-7bce4000 Dwarf ntdll<elf>
\-PE 7bc10000-7bce4000 \ ntdll
ELF 7bf00000-7bf04000 Dwarf <wine-loader>
ELF 7dcbc000-7dce0000 Deferred imm32<elf>
\-PE 7dcc0000-7dce0000 \ imm32
ELF 7dd02000-7dd08000 Deferred libxfixes.so.3
ELF 7dd08000-7dd13000 Deferred libxcursor.so.1
ELF 7dd13000-7dd26000 Deferred libxi.so.6
ELF 7dd26000-7dd2a000 Deferred libxcomposite.so.1
ELF 7dd2a000-7dd35000 Deferred libxrandr.so.2
ELF 7dd35000-7dd40000 Deferred libxrender.so.1
ELF 7dd40000-7dd46000 Deferred libxxf86vm.so.1
ELF 7dd46000-7dd4a000 Deferred libxinerama.so.1
ELF 7dd4a000-7dd70000 Deferred libxcb.so.1
ELF 7dd70000-7dea7000 Deferred libx11.so.6
ELF 7dea7000-7debc000 Deferred libxext.so.6
ELF 7dee0000-7df72000 Deferred winex11<elf>
\-PE 7def0000-7df72000 \ winex11
ELF 7df72000-7e090000 Deferred opengl32<elf>
\-PE 7df90000-7e090000 \ opengl32
ELF 7e090000-7e1cc000 Deferred wined3d<elf>
\-PE 7e0a0000-7e1cc000 \ wined3d
ELF 7e1cc000-7e240000 Deferred ddraw<elf>
\-PE 7e1d0000-7e240000 \ ddraw
ELF 7e253000-7e27c000 Deferred libexpat.so.1
ELF 7e27c000-7e2b8000 Deferred libfontconfig.so.1
ELF 7e2b8000-7e32b000 Deferred libpcre.so.1
ELF 7e32b000-7e436000 Deferred libglib-2.0.so.0
ELF 7e436000-7e492000 Deferred libharfbuzz.so.0
ELF 7e492000-7e4d0000 Deferred libpng16.so.16
ELF 7e4d0000-7e4e1000 Deferred libbz2.so.1.0
ELF 7e4e1000-7e4f8000 Deferred libz.so.1
ELF 7e4f8000-7e59c000 Deferred libfreetype.so.6
ELF 7e59c000-7e601000 Deferred libncursesw.so.5
ELF 7e625000-7e6d9000 Dwarf msvcrt<elf>
\-PE 7e640000-7e6d9000 \ msvcrt
ELF 7e6d9000-7e704000 Deferred msacm32<elf>
\-PE 7e6e0000-7e704000 \ msacm32
ELF 7e704000-7e786000 Deferred rpcrt4<elf>
\-PE 7e710000-7e786000 \ rpcrt4
ELF 7e786000-7e8bf000 Deferred ole32<elf>
\-PE 7e7a0000-7e8bf000 \ ole32
ELF 7e8bf000-7e930000 Deferred advapi32<elf>
\-PE 7e8d0000-7e930000 \ advapi32
ELF 7e930000-7ea51000 Deferred gdi32<elf>
\-PE 7e940000-7ea51000 \ gdi32
ELF 7ea51000-7eba7000 Deferred user32<elf>
\-PE 7ea60000-7eba7000 \ user32
ELF 7eba7000-7ec5e000 Deferred winmm<elf>
\-PE 7ebb0000-7ec5e000 \ winmm
ELF 7ef8f000-7efdc000 Deferred libm.so.6
ELF 7efdf000-7efe6000 Deferred libxdmcp.so.6
ELF 7efe6000-7f000000 Deferred version<elf>
\-PE 7eff0000-7f000000 \ version
ELF f734d000-f7352000 Deferred libdl.so.2
ELF f7352000-f7360000 Deferred libnss_files.so.2
ELF f7372000-f7376000 Deferred libxau.so.6
ELF f7376000-f752e000 Dwarf libc.so.6
ELF f752e000-f754a000 Deferred libpthread.so.0
ELF f754a000-f7703000 Dwarf libwine.so.1
ELF f7704000-f7728000 Deferred ld-linux.so.2
ELF f7728000-f7729000 Deferred [vdso].so
Threads:
process tid prio (all id:s are in hex)
00000008 (D) C:\Program Files\Meritousness\Meritous.exe
00000009 0 <==
0000000e services.exe
0000001d 0
0000001c 0
00000016 0
00000014 0
00000010 0
0000000f 0
00000012 winedevice.exe
0000001b 0
00000018 0
00000017 0
00000013 0
00000019 plugplay.exe
0000001f 0
0000001e 0
0000001a 0
00000020 explorer.exe
00000021 0
System information:
Wine build: wine-1.7.28
Platform: i386
Host system: Linux
Host version: 3.16.3-1-ARCH
However, unlike the few dozen other threads also including "Unhandled page fault on read access", I don't have any other errors to work with, and my backtrace is 23 lines instead of the usual 2-3. I've tried 'pacman -Ss' for various libraries and drivers like in the other threads, but there doesn't appear to be anything I'm missing. Also, the game isn't in the appdb, so I can't look there for help.
I'm figuratively flying blind, from newbiness and from lack of understandable, so any more experience with random failures like this would be appreciated.
Help?
Edit: Oh, and if you're wondering why I don't just compile from source, it's because that version always crashes halfway through the game; I'll be copying my saves from that version to this one if I get it running.
Last edited by Torignit (2014-10-15 11:04:00)

You'd better choose to build it from the AUR with makepkg and install it with pacman:
https://wiki.archlinux.org/index.php/AU … Guidelines
But nice that you could now play with it.
Concerning Wine: I didn't see this game in the WineHQ - Wine Application Database
Maybe it doesn't work with Wine.
Last edited by berbae (2014-10-16 09:52:19)

[SOLVED]bin32-wine 1.1.1 opengl error

Trying to start counter-strike 1.6 on arch64 I get the error
Error initializing gl driver, check that the file 'opengl32.dll' exists
Using xf86-video-intel driver, direct rendering enabled. Used to work with older versions of wine, but no longer...
Last edited by low (2008-07-20 11:58:43)

ok fixed, i installed perfect world to see if it a steam specific error, and it was not, but i got a lot more readable output from the perfect world launcher. turns out lib32xdamage was not installed and is a dependency.... not listed in bin32-wine or the bin32-wine-suse PKGBUILD....

How to solve the ASInstance error

hello everyone,
when i install the BIEE11g, I always met a same mistake, that is 'ASInstance install error'. then I lookup the log file, it writes 'ASInstance error, Error in starting opmn server. operation aborted because of a system call failure or internal error'. could you tell me how to solve it?
if i choose to skip the error and continue to install, i could not to visit the http://localhost:7001/analytics and could not succee to run startall command in opmn.
notes: my os is win xp sp3 and database vision is 11.2.0.1.0 and rcu is 1.1.5.0
thank you very much.
regards,
phoeny

hello everyone,
when i install the BIEE11g, I always met a same mistake, that is 'ASInstance install error'. then I lookup the log file, it writes 'ASInstance error, Error in starting opmn server. operation aborted because of a system call failure or internal error'. could you tell me how to solve it?
if i choose to skip the error and continue to install, i could not to visit the http://localhost:7001/analytics and could not succee to run startall command in opmn.
notes: my os is win xp sp3 and database vision is 11.2.0.1.0 and rcu is 1.1.5.0
thank you very much.
regards,
phoeny

[solved] SWTOR wine doesn't launch

So, I've been trying to get swtor to launch, but I'm quite unsuccesful...
The game doesn't start after I click "Play" in the launcher (after installing any updates and patches)
What have I tried?
1) Native wine plus the Method described here as "updated instructions" in the comments: http://appdb.winehq.org/objectManager.p … &iId=27088
2) Playonlinux with special patched wine
It doesn't work both times, with the following output (method 1):
Waiting for swtor...
Using native override for following DLLs: msvcp90
Executing winetricks_early_wine regedit C:\windows\Temp\_native\override-dll.reg
Executing w_do_call d3dx9_36
d3dx9_36 already installed, skipping
Executing w_do_call vcrun2008
vcrun2008 already installed, skipping
Executing w_do_call msls31
msls31 already installed, skipping
Executing w_do_call winhttp
winhttp already installed, skipping
[0706/202513:ERROR:network_change_notifier_win.cc(111)] WSALookupServiceBegin failed with: 8
[0706/202513:ERROR:proxy_config_service_win.cc(159)] WinHttpGetIEProxyConfigForCurrentUser failed: 2
I'm guessing the last to errors are the cause, but I have no Idea how to get rid of them. Anybody have an Idea or also has the same problem?
Last edited by TimorLee (2014-07-07 11:35:03)

Nope, but it appears that SWTOR just has HUGE amounts of loading time. After waking up this morning it actually got to the loading screen! (somewhrer up to 4 hours!)
So it seems I was just to impatient, but now I can't get past the loading screen. There is a blue loading cog that keeps on turning, but nothing happens. (I'm guessing after 4 hours of waiting, nothing else will happen). Trying a few things about that now, I think I know why that error happens, and I hope the loading time can be cut down somehow
It appears the game requires 1-4 hours to load, I'll check that when I have the time.
As comparison for others, here are my specs:
Intell i5 2.2 Ghz
4GB Ram
Intel HD 4000
I've my idea doesn't work I'll try wine-stable, if it works, I'll change the thread to solved
Last edited by TimorLee (2014-07-07 08:43:35)

[SOLVED] Installed Win 7, now Arch won't boot

Edit: To save anyone reading this all the way, the problem turned out to be a badly edited fstab. Sigh.
PROBLEM:
Grub loads, then loads the kernel, but the boot hangs a few seconds later with no real error messages.
BACKGROUND:
1) I needed to boot a native Windows 7 partition on my 128GB laptop SSD.
2) So, I used gparted in an Ubuntu Live USB to resize my existing Arch partition and create an NTFS partition for Win 7:
sda > sda1=Arch > sda2=ntfs > sda3=linux swap
Arch still booted fine after this (sda1).
3) I then installed windows 7 (BIOS install) onto the second partition (sda2). I don't know where or if it puts some system reserved partition - but I can't see anything in gparted.
4) chrooted from an Arch Live USB, reinstalled GRUB, including mkconfig step
5) *If* I recall, Arch then booted OK.
6) Booted into Windows and applied all updates, set windows to use UTC clock and updated my laptops BIOS. Reboot.
7) Win 7 boots fine from the grub menu from (hd0,2)
8) Arch starts booting, loads the kernel, then hangs after the kernel has loaded, but before gdm appears. With the following on screen:
[2.104597] INFO @wl_cfg80211_attach : Registered CFG80211 phy
I have tried chrooting and reinstalling linux and linux-headers and grub. But so far to no avail.
[SOLVED with face palm]
I installed syslinux using chroot, as it displays more startup messages. The boot was hanging at [a disk task is starting] or words to that effect. It was my USB stick, which I'd foolishly added to fstab with the "auto" option. Editing that out of fstab - and it's all good.
I'll leave this here in case anyone else does something this dumb.
Last edited by sultanoswing (2013-10-30 08:09:03)

fettouhi wrote:
Thanks for the clarification about the DAEMONS list. My DAEMONS list is:
DAEMONS=(!hwclock ntpd syslog-ng !network netfs crond @alsa dbus networkmanager ufw cupsd avahi-daemon samba)
when I try to enable alsa and dbus I get this
[root@andre ~]# systemctl enable alsa-store.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable alsa-restore.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
[root@andre ~]# systemctl enable dbus.service
The unit files have no [Install] section. They are not meant to be enabled using systemctl.
Is LVM handled automatically by systemd? The reason I ask is because I have the USELVM= set to YES in rc.conf.
I made the permanent transition to systemd and did not start alsa at all - sound works fine - so I never bothered with the alsa-store/alsa-restore service files at all - it just works! Also dbus gets handled by default in systemd so you don't need any starting of dbus service at all... it just works.

[solved] MTGO wine error

Similar Messages

Maybe you are looking for