[Solved] mtp usage

I have just started using mtp to transfer files to my mobile phone & it works fast & flawlessly (yeah!)
My only concern is dismounting / disconnecting the phone when the transfer is complete.
Q1 is this required ? will data be corrupted if I just unplug the usb cable?
Q2 what command do I need to use ?
I have searched everywhere for an answer to above, but am drawing a blank.
ps not looking for suggestions of alternatives to mtp.
Last edited by flipper T (2013-12-17 03:29:19)

Found this post (here : http://forum.xda-developers.com/showthr … t=1469519)
Galaxy Nexus uses MTP for file Transfers in contrast to older versions that uses USB mass storage (in effect emulating an USB-Stick).
MTP is a lot safer, because the PC doesn't get to the lowlevel filesystem details, so it can't ruin them with a bad unplug.
When using MTP worst cases are when the file is still transferring it might not get saved completely. Well in theory android could get confused, but i don't think that will happen.
With USB mass storage as protocol the worst case is an unreadable file system, but that protocol isn't available on stock google nexus.
In short: It's save.
I don't do windows, but maybe that's why windows doesn't even show the icon: It not needed.
...seems applicable / will mark as solved.
Last edited by flipper T (2013-12-17 03:28:59)

Similar Messages

[SOLVED] modprobe usage info displayed at boot

This thread seems related to /sbin/modprobe runs at boot before udev [solved]
I'm using mkinitcpio 0.7.2-1 on x86_64, my system is completely up-to-date, but somehow I seem to be still affected by FS#24766: I'm getting modprobe's usage info displayed at boot.
My MODULES array in /etc/mkinitcpio.conf is empty and the file is unmodified.
I have tried reinstalling mkinitcpio with no positive results.
Any ideas? Thanks
Last edited by kynikos (2011-07-31 18:59:41)

Eheh, it worked, thanks! I wonder why reinstalling mkinitcpio didn't solve it then... well, nevermind

[SOLVED] Example usage of pyalpm library

Hİ,
I am trying to find my way around pyalpm library, but I couldn't be able to do much yet. So far, I have been able to get local database and sync databases but I couldn't be able to refresh databases, install/remove a new package etc.
And also, it would be nice if someone explained to me the work flow of pyalpm, because so far I couldn't be able to fully understand what does exactly what.
Thanks in advance
Yaşar Arabacı
Edit: I guess I just figured out everyday usage functionality of pyalpm. But I still need to see some pyalpm.transaction.init() examples. Especially, how are we passsing arguments to that. (e.g list, tuples, keywordargs,str??). And also, should I pass some arguments to pyalpm.transaction.prepare() or, just use it as it is?
Edit:2
Appearantly, pycman package have lots of them, so I am marking this thread solved.
Last edited by yasar11732 (2011-07-01 23:16:21)

I'm having the same issue. Has anyone found a solution?

[Solved] cpu usage 100%, it is bug of lxpanel

My archlinux is on an old PIII machine. Recently, I found its CPU usage is 100%.
But, I don't know how to solve it. I can not found out which is cpu eater.
vmstat is 0 idle, but on top view, there are a few process with lower cpu usage.
I've tried both kernel, both cause 100% cpu usage.
kernel26 2.6.37.5-1
kernel26-lts 2.6.32.36-1
# vmstat 2 10
procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu----
r b swpd free buff cache si so bi bo in cs us sy id wa
1 0 0 103060 26496 227192 0 0 52 38 202 425 56 41 1 3
4 0 0 103300 26496 227196 0 0 0 0 192 439 54 47 0 0
1 0 0 103300 26496 227196 0 0 0 0 303 589 64 36 0 0
1 0 0 103316 26496 227196 0 0 0 0 367 656 64 37 0 0
# top - 22:37:53 up 52 min, 2 users, load average: 2.46, 1.87, 1.80
Tasks: 81 total, 2 running, 79 sleeping, 0 stopped, 0 zombie
Cpu(s): 57.9%us, 41.1%sy, 0.0%ni, 0.0%id, 0.0%wa, 1.0%hi, 0.0%si, 0.0%st
Mem: 495416k total, 385172k used, 110244k free, 25784k buffers
Swap: 0k total, 0k used, 0k free, 224916k cached
PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND
1152 root 20 0 70992 20m 5976 S 14.5 4.2 1:13.63 X
23680 dlin 20 0 109m 22m 13m S 7.2 4.6 1:43.47 chromium
1887 dlin 20 0 138m 12m 9848 S 6.9 2.6 0:12.89 lxterminal
1182 dlin 20 0 99848 11m 8904 S 3.9 2.3 2:42.20 lxpanel
1191 dlin 20 0 297m 43m 27m S 1.0 9.1 1:00.54 chromium
21399 dlin 20 0 4404 1144 888 R 0.7 0.2 0:00.02 menu-cache-gen
1 root 20 0 1712 608 548 S 0.3 0.1 0:17.09 init
4 root 20 0 0 0 0 S 0.3 0.0 0:02.20 ksoftirqd/0
419 root 20 0 0 0 0 D 0.3 0.0 0:02.82 usb-storage
1161 root 20 0 3648 1144 988 S 0.3 0.2 0:00.65 hald-addon-stor
Last edited by dlin (2011-04-02 16:38:08)

It seems that the problem occurs to me too! Could it be linked with libreoffice?
I think I have permission in ~/.cache directory:
ls -lh |grep .cache
drwxr-xr-x 2 manu manu 4,0K 29 mars 2010 cache
[11:21][manu@compal:~]$ ls -lh .cache
total 36K
drwx------ 2 manu manu 4,0K 19 oct. 15:56 dconf
-rw-r--r-- 1 manu manu 12K 14 mars 11:52 event-sound-cache.tdb.12c7aa4c6ede9c34246c65044a475d7e.i686-pc-linux-gnu
drwxr-xr-x 3 manu manu 4,0K 18 août 2010 geeqie
drwx------ 3 manu manu 4,0K 22 sept. 2010 gegl-0.1
drwxr-xr-x 2 manu manu 4,0K 12 sept. 2010 gogglesmm
drwx------ 2 manu manu 4,0K 1 avril 19:49 menus
drwx------ 3 manu manu 4,0K 11 déc. 18:42 vlc
[11:21][manu@compal:~]$ ls -lh .cache/menus
total 80K
-rw------- 1 manu manu 38K 23 nov. 19:24 26a80813bb7494e1d982502af748aef6
-rw------- 1 manu manu 38K 1 avril 19:49 757379b1865bb943a0541b554ffbb809
lxpanel is linked with .cache/menus directory?
I will try to delete .cache and see what happens!!

[SOLVED] MTP problem

Hi There,
I have Lumia 520 and i understands MTP. ID can list files using "mtp-filetree" command but that is very brute and ugly method. I want to copy/remove files. I am trying to mount it but it is not working. I tried PCManFM to but that never vorks. Any idea what can I do to access the device ?
[root@arch64 sda5]# mtpfs -o allow_other /mnt/sdd1
Unable to open ~/.mtpz-data for reading, MTPZ disabled.
Listing raw device(s)
Device 0 (VID=0421 and PID=0661) is a Nokia Nokia Lumia WP8.
Found 1 device(s):
Nokia: Nokia Lumia WP8 (0421:0661) @ bus 6, dev 3
Attempting to connect device
object 1 has parent 0xffffffff (-1) continuing anyway
object 2 has parent 0xffffffff (-1) continuing anyway
object 3 has parent 0xffffffff (-1) continuing anyway
object 8 has parent 0xffffffff (-1) continuing anyway
object 29 has parent 0xffffffff (-1) continuing anyway
object 2a has parent 0xffffffff (-1) continuing anyway
object 2b has parent 0xffffffff (-1) continuing anyway
object 2e5 has parent 0xffffffff (-1) continuing anyway
object 2e6 has parent 0xffffffff (-1) continuing anyway
object 2e7 has parent 0xffffffff (-1) continuing anyway
object 2ec has parent 0xffffffff (-1) continuing anyway
object 2ed has parent 0xffffffff (-1) continuing anyway
object 2ee has parent 0xffffffff (-1) continuing anyway
Listing File Information on Device with name: Windows Phone
[root@arch64 sda5]# ls /mnt/sdd1/
[root@arch64 sda5]#
[root@arch64 sda5]# mount | grep sdd1
[root@arch64 sda5]#
Last edited by arnuld (2014-10-12 04:40:27)

@KopkinsBoth gvfs and gvfs-mtp are already installed but somehow Thunar (xfce filemanager) and PCManFM can only recognize the phone can neither browse nor show the phone content. They just freeze when I click on phone.
@firecat: your advice worked. I am using simple-mtpfs now and it works great.

[SOLVED] Remote usage

I'm kind of used to VNC and TeamViewer to give support to my machines but I want to ask for something completely different.
I want to setup a headless machine and remotely (from what is usually called a dumb terminal) connect to the machine and use its window manager and everything as if i was phisically using that machine with the keyboard and mouse plugged on it, but via network..... Is this so uncommon or difficult?
Thanks.
Last edited by Xi0N (2012-12-23 22:17:50)

I am using xvfb with x11vnc and ssh. I tried vncserver before but it could not handle i3 (no xkb extension or something like that).
On remote machine (under screen / tmux so it won't dissapear if i'm disconnected):
Xvfb :1 -nolisten tcp -screen 0 1280x1024x16
DISPLAY=:1 i3
x11vnc -display :1 -localhost
On local machine:
ssh -L 5900:localhost:5900
(or putty: connection -> ssh -> tunnels)
This gives you encrypted persistent vnc session. On reconnect you need to start x11vnc once again.

[solved]Grep usage

So if I'm reading the man pages right if I run something like 'grep -f awesome' It'll search the whole filesystem for any file with 'awesome'
Last edited by jedijimi (2014-03-23 19:19:49)

No.
-f FILE, --file=FILE
Obtain patterns from FILE, one per line. The empty file contains zero patterns, and therefore matches nothing. (-f is specified by POSIX.)
The -f option is for when you have a file containing the patterns you wish to match against...
$ grep alias .bashrc
# Source ~/.bash_aliases
if [ -f ~/.bash_aliases ]; then
. ~/.bash_aliases
$ echo alias > patterns
$ grep -f patterns .bashrc
# Source ~/.bash_aliases
if [ -f ~/.bash_aliases ]; then
. ~/.bash_aliases

[solved] stat64() usage in C

Can someone tell me how to use the large file functions, especially stat64()? I always get
warning: implicit declaration of function 'stat64'
and for the struct stat64 named "filestat"
error: storage size of 'filestat' isn't known
I already crawled every page I found via google and tried with no success:
- compiling with -D_FILE_OFFSET_BITS=64
- #define __USE_LARGEFILE64
- #define _LARGEFILE_SOURCE
- #define _LARGEFILE64_SOURCE
Any suggestions? Thanks in advance!
lynix
Last edited by lynix (2009-10-23 21:11:22)

why not use just the stat instead of stat64 ??
i rly dont know what this c program need to do i'm a beginner c/c++ programmer, but at least i can use google and i found that use stat instead of stat64...
and i tried to and compiles without a problem, so i think it need to be good
1 /*
2 * =====================================================================================
3 *
4 * Filename: test.c
5 *
6 * Description:
7 *
8 * Version: 1.0
9 * Created: 10/23/2009 11:52:20 PM
10 * Revision: none
11 * Compiler: gcc
12 *
13 * Author: Czaka Hunor (), [email protected]
14 * Company:
15 *
16 * =====================================================================================
17 */
18
19 #include <sys/stat.h>
20
21 #define __USE_LARGEFILE64
22 #define _LARGEFILE_SOURCE
23 #define _LARGEFILE64_SOURCE
24
25 int main()
26 {
27 struct stat mystat;
28
29 stat("/etc/fstab", &mystat);
30
31 return 0;
32 }
┌─[ hybrid@arch ~ ]
└─[ $> gcc -Wall -c test.c
test.c: In function 'main':
test.c:27: error: storage size of 'mystat' isn't known
test.c:29: warning: implicit declaration of function '_stat64'
test.c:27: warning: unused variable 'mystat'
┌─[ hybrid@arch ~ ]
└─[ $> gcc -Wall -c test.c
┌─[ hybrid@arch ~ ]
└─[ $> gcc test.o -o test
┌─[ hybrid@arch ~ ]
└─[ $> ./test
┌─[ hybrid@arch ~ ]
└─[ $>
hope i helped

[SOLVED] swap usage when there is plenty of ram availibale

Hi guys, I'm not sure if this is correct subforum, but here is the question
By default linux kernel uses swap partition even if there is lots of ram availiable. What's the purpose of this? And is there a way to turn this off in Arch.
Last edited by ogronom (2008-11-03 18:59:10)

found 2 articles (pretty old) about this issue
http://www.beranger.org/index.php?article=1547&page=3k
http://lwn.net/Articles/83588/

[SOLVED] Check for old configuration files and directories in ~/

Hello,
Since I started with Arch I tried and uninstalled a few programs and would like to check for possible left overs in ~/
I tried the "lostfiles" script, but it does not seem to check the home directory. Then I followed this: https://wiki.archlinux.org/index.php/Pa … ny_package - But using the suggested alias in my bash, it gives me the below:
$ pacman-disowned-files
[sudo] password for [my user]:
bash: -path: command not found
bash: /root: Is a directory
bash: -print: command not found
What am I doing wrong?
Regards
Martin
Last edited by onslow77 (2015-02-04 23:52:44)

Hello,
ohh, I see, I need to do this (in directory where I put the script)
sh pacman-disowned -files > test.txt
That solved the usage of the commands, but it does not however list files [in the test.txt file] that do not belong to any package in my ~/ directory (I put a dummy file in my ~/ to see if it got noticed) - but it did not. So how can I list files and directories in my ~/ directory that is not put there by any package that currently is installed?
Regards
Martin
Last edited by onslow77 (2015-02-04 22:49:11)

Aggregating data loaded into different hierarchy levels

I have some problems when i try to aggregate a variable called PRUEBA2_IMPORTE dimensinated by time dimension (parent-child type).
I read the help in DML Reference of the OLAP Worksheet and it said the follow:
When data is loaded into dimension values that are at different levels of a hierarchy, then you need to be careful in how you set status in the PRECOMPUTE clause in a RELATION statement in your aggregation specification. Suppose that a time dimension has a hierarchy with three levels: months aggregate into quarters, and quarters aggregate into years. Some data is loaded into month dimension values, while other data is loaded into quarter dimension values. For example, Q1 is the parent of January, February, and March. Data for March is loaded into the March dimension value. But the sum of data for January and February is loaded directly into the Q1 dimension value. In fact, the January and February dimension values contain NA values instead of data. Your goal is to add the data in March to the data in Q1. When you attempt to aggregate January, February, and March into Q1, the data in March will simply replace the data in Q1. When this happens, Q1 will only contain the March data instead of the sum of January, February, and March. To aggregate data that is loaded into different levels of a hierarchy, create a valueset for only those dimension values that contain data. DEFINE all_but_q4 VALUESET time
LIMIT all_but_q4 TO ALL
LIMIT all_but_q4 REMOVE 'Q4'
Within the aggregation specification, use that valueset to specify that the detail-level data should be added to the data that already exists in its parent, Q1, as shown in the following statement. RELATION time.r PRECOMPUTE (all_but_q4)
How to do it this for more than one dimension?
Above i wrote my case of study:
DEFINE T_TIME DIMENSION TEXT
T_TIME
200401
200402
200403
200404
200405
200406
200407
200408
200409
200410
200411
2004
200412
200501
200502
200503
200504
200505
200506
200507
200508
200509
200510
200511
2005
200512
DEFINE T_TIME_PARENTREL RELATION T_TIME <T_TIME T_TIME_HIERLIST>
-----------T_TIME_HIERLIST-------------
T_TIME H_TIME
200401 2004
200402 2004
200403 2004
200404 2004
200405 2004
200406 2004
200407 2004
200408 2004
200409 2004
200410 2004
200411 2004
2004 NA
200412 2004
200501 2005
200502 2005
200503 2005
200504 2005
200505 2005
200506 2005
200507 2005
200508 2005
200509 2005
200510 2005
200511 2005
2005 NA
200512 2005
DEFINE PRUEBA2_IMPORTE FORMULA DECIMAL <T_TIME>
EQ -
aggregate(this_aw!PRUEBA2_IMPORTE_STORED using this_aw!OBJ262568349 -
COUNTVAR this_aw!PRUEBA2_IMPORTE_COUNTVAR)
T_TIME PRUEBA2_IMPORTE
200401 NA
200402 NA
200403 2,00
200404 2,00
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
2004 4,00 ---> here its right!! but...
200412 NA
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
2005 10,00 ---> here must be 30,00 not 10,00
200512 NA
DEFINE PRUEBA2_IMPORTE_STORED VARIABLE DECIMAL <T_TIME>
T_TIME PRUEBA2_IMPORTE_STORED
200401 NA
200402 NA
200403 NA
200404 NA
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
2004 NA
200412 NA
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
2005 10,00
200512 NA
DEFINE OBJ262568349 AGGMAP
AGGMAP
RELATION this_aw!T_TIME_PARENTREL(this_aw!T_TIME_AGGRHIER_VSET1) PRECOMPUTE(this_aw!T_TIME_AGGRDIM_VSET1) OPERATOR SUM -
args DIVIDEBYZERO YES DECIMALOVERFLOW YES NASKIP YES
AGGINDEX NO
CACHE NONE
END
DEFINE T_TIME_AGGRHIER_VSET1 VALUESET T_TIME_HIERLIST
T_TIME_AGGRHIER_VSET1 = (H_TIME)
DEFINE T_TIME_AGGRDIM_VSET1 VALUESET T_TIME
T_TIME_AGGRDIM_VSET1 = (2005)
Regards,
Mel.

Mel,
There are several different types of "data loaded into different hierarchy levels" and the aproach to solving the issue is different depending on the needs of the application.
1. Data is loaded symmetrically at uniform mixed levels. Example would include loading data at "quarter" in historical years, but at "month" in the current year, it does /not/ include data loaded at both quarter and month within the same calendar period.
= solved by the setting of status, or in 10.2 or later with the load_status clause of the aggmap.
2. Data is loaded at both a detail level and it's ancestor, as in your example case.
= the aggregate command overwrites aggregate values based on the values of the children, this is the only repeatable thing that it can do. The recomended way to solve this problem is to create 'self' nodes in the hierarchy representing the data loaded at the aggregate level, which is then added as one of the children of the aggregate node. This enables repeatable calculation as well as auditability of the resultant value.
Also note the difference in behavior between the aggregate command and the aggregate function. In your example the aggregate function looks at '2005', finds a value and returns it for a result of 10, the aggregate command would recalculate based on january and february for a result of 20.
To solve your usage case I would suggest a hierarchy that looks more like this:
DEFINE T_TIME_PARENTREL RELATION T_TIME <T_TIME T_TIME_HIERLIST>
-----------T_TIME_HIERLIST-------------
T_TIME H_TIME
200401 2004
200402 2004
200403 2004
200404 2004
200405 2004
200406 2004
200407 2004
200408 2004
200409 2004
200410 2004
200411 2004
200412 2004
2004_SELF 2004
2004 NA
200501 2005
200502 2005
200503 2005
200504 2005
200505 2005
200506 2005
200507 2005
200508 2005
200509 2005
200510 2005
200511 2005
200512 2005
2005_SELF 2005
2005 NA
Resulting in the following cube:
T_TIME PRUEBA2_IMPORTE
200401 NA
200402 NA
200403 2,00
200404 2,00
200405 NA
200406 NA
200407 NA
200408 NA
200409 NA
200410 NA
200411 NA
200412 NA
2004_SELF NA
2004 4,00
200501 5,00
200502 15,00
200503 NA
200504 NA
200505 NA
200506 NA
200507 NA
200508 NA
200509 NA
200510 NA
200511 NA
200512 NA
2005_SELF 10,00
2005 30,00
3. Data is loaded at a level based upon another dimension; for example product being loaded at 'UPC' in EMEA, but at 'BRAND' in APAC.
= this can currently only be solved by issuing multiple aggregate commands to aggregate the different regions with different input status, which unfortunately means that it is not compatable with compressed composites. We will likely add better support for this case in future releases.
4. Data is loaded at both an aggregate level and a detail level, but the calculation is more complicated than a simple SUM operator.
= often requires the use of ALLOCATE in order to push the data to the leaves in order to correctly calculate the aggregate values during aggregation.

WHY WON'T CREATIVE ZEN MICRO MEDIA EXPLORER RECOGNIZE MY ZEN MI

I am wanting to start transfering music over from my laptop to my zen micro.
I try go into Zen Micro Media Explorer and it says this: The device is not connected. Please connect your zen micro to the computer.
My zen micro is connected and it says "docked" on the screen.
When I connect it to my laptop with the usb cable it makes the connection sound and MTP Media screen pops up giving me 2 options: syncronise files to this device using Windows Media Player or to take no action. Shouldn't the micro media explorer option pop up here too?
How can i solve this?

No problem
It's better to direct folks to the link "problems with connecting using MTP firmware" in the FAQ post, which takes them here in the Zen FAQ at Nomadness.net. This has the full set of help that has worked to-date with solving MTP problems.

GWIA sending issues!

Hi,
Not sure if anyone will be able to assist with the information I supply!
We have 2 x GWIA's in 2 different physical locations in London each servicing 1 x domain and 3 x PO's each. For some weird reason one the of the GWIA's suddenly stopped sending outbound external mailo, inbound external mail seems to be working ok.
The GWIA's run on Netware 6.5 SP6 and we run Groupwise 7.0.4 - nothing has changed on our network, our internet links are fine, no firewall changes etc. Our outbound/inbound external mail routes via Postini but their tech support can see both GWIA's communicating with their servers.
I have checked the SEND folder on the problem GWIA and there are a few messages in there of 0KB but not a massive backlog of e-mails.
I don't see anything screaming out "problem" in the log file.
Temporarily I have routed e-mails for the three PO's that cannot send, out via the other GWIA to enable them to send out external e-mail.
Any advice welcome.
Thank you
Mike

Glad that all is working
Maybe see you soon
T
On Tue, 10 Jan 2012 11:21:11 GMT, "Mike Goodson"
<[email protected]> wrote:
>Hi Tim,
>
>Thanks for your message. I carried on looking into the problem and "resolved" it although I assume the thing I did actually resolved the issue rather than it resolving itself!
>
>I noticed hundreds of IMAP requests hitting the GWIA - then realized we had a DNS entry assigned to the external IP on the DMZ, so I disabled IMAP on the GWIA. Pretty much as soon as I did this I was able to send external outbound e-mail - coincidence? I assumed that all the IMAP requests from devices may have caused the problem?
>
>Anyway, I did follow your recommendations below just out of interest but found that MTP on GWIA was set to port 0 so obviously we don't use that.
>
>Kind regards
>Mike
>
>"Tim Heywood (NKP)" <[email protected]> wrote in message news:[email protected]...
>> Morning Mike,
>>
>> Something has to have changed - not nessisarily of your doing.
>>
>>
>> First are you using MTP? If you look at the domain that hosts the
>> broken GWIA look at the mslocal\mshold directory you will find a
>> directory that corespons to the GWIA (in each of the folders there you
>> will see a file name "mtaname" find the one that coresponds to the
>> GWIA and then see how big it is - if very large. Simple resolutoin of
>> that would be to stop and then start both the Domain and the GWIA. To
>> check the MTP usage, look in ConsoleOne, GWIA, GroupWise tab, Network
>> Address - does the top box (message transfer protocol) have a number
>> in there? 0 would be unot used, 7102 would indicate that it is and
>> the port uses is indeed 7102.
>>
>> Have a look and if that isn't it we can move down the queue
>>
>> T (up north)
>>
>>
>> On Sat, 07 Jan 2012 14:17:45 GMT, "Mike Goodson"
>> <[email protected]> wrote:
>>
>>>Hi,
>>>
>>>Not sure if anyone will be able to assist with the information I supply!
>>>
>>>We have 2 x GWIA's in 2 different physical locations in London each servicing 1 x domain and 3 x PO's each. For some weird reason one the of the GWIA's suddenly stopped sending outbound external mailo, inbound external mail seems to be working ok.
>>>
>>>The GWIA's run on Netware 6.5 SP6 and we run Groupwise 7.0.4 - nothing has changed on our network, our internet links are fine, no firewall changes etc. Our outbound/inbound external mail routes via Postini but their tech support can see both GWIA's communicating with their servers.
>>>
>>>I have checked the SEND folder on the problem GWIA and there are a few messages in there of 0KB but not a massive backlog of e-mails.
>>>
>>>I don't see anything screaming out "problem" in the log file.
>>>
>>>Temporarily I have routed e-mails for the three PO's that cannot send, out via the other GWIA to enable them to send out external e-mail.
>>>
>>>Any advice welcome.
>>>
>>>Thank you
>>>Mike

Strange problem with zen micro (I'm going mad!!

merry xmas!! I've bought a zen micro in seprember, flashed with .xx firmware; I always used it with windows 2000 with no problem, but... problems began when I've installed a pci card usb 2.0 on my pc; the card worked finely with everything but not with zen micro, that's to say that everytime I tried to import songs by media explorer, the program often wasn't able to import songs; so I've installed windows xp and flashed zen micro with 2.xx firmware (I've installed also service pack 2 and wmp0), but things have gone wrong!!! now everytime I connect zen micro to pc, xp asks the drivers, and it doesn't want neither the driver I've found on creative's cd, nor drivers downloaded from creative's site!! And it's not finished: now zen micro is without firmware and everytime I'm trying to flsh it, a dialogue box says that the player is not connect!!!
can anybody help me? otherwise I'll have to write to creative support for a substitution...
please help me!!!!!

Strange. Unfortunately MTP connection problems are very tricky to solve. It's hard to know whether the firmware upgrade was partially successful, and whether you are on v or v2 firmware. It sounds like v2 firmware, due to the connection problems with MTP.
The drivers for the v2 firmware are provided by Windows Media Player 0, and are located in the C:\WINDOWS\INF directory. You could try pointing there.
As the player has no firmware though you have to go into recovery mode, choose "reload firmware", then connect to the PC (see if it's detected) and run the firmware update again.
If this doesn't work try and find another PC, say a friend's, that meets the requirements of Win XP + SP/2 + WMP0, and see if you can update.
In terms of resolving the connection problem if it continues, have a look at this thread, particularly the reply by DM, which goes through some of the troubleshooting to solve MTP connection problems. Also look for the link "problems with connecting using MTP firmware" in the FAQ post.

I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Help!

I have a iPhone 5. In usage, it says i have 2.1 gigs used because of photos and camera. I have deleted all my photos via iPhoto and now reset the phone back to factory settings in order to try to solve this problem, to no avail. Both iTunes and the phone say that 2.1 gigs are being used, even though the phone now has nothing on it. What is going on?

Yeah it works fine over wifi the problem is when I try to use it over my 3G. It's really stressing me out now.

[Solved] mtp usage

Similar Messages

Maybe you are looking for