[SOLVED]Mutes by itself

I have to use gnome alsa mixer to unmute and adjust the sound every time I reboot. Alsamixer does not work. If I adjust volume in alsamixer nothing happens (the program shows that I'm adjusting, but no sound is coming)
Last edited by Session (2008-06-29 01:37:41)

Solved by putting alsa in daemon /etc/rc.conf and doind alsactl store

Similar Messages

  • The Volume on my Mac pro is not working. I can't raise or lower the volume and sometimes it mutes by itself. additionally, the speaker button on the top right is garbed out.

    The Volume on my Mac pro is not working. I can't raise or lower the volume and sometimes it mutes by itself. additionally, the speaker button on the top right is garbed out.

    Hi there profreak,
    You may find the troubleshooting steps in the article below helpful.
    Troubleshooting issues with no audio from built-in speakers on Macs
    http://support.apple.com/kb/ts1574
    -Griff W. 

  • My Macbook Pro has recently started to mute/unmute itself randomly. VERY FRUSTRATING! It doesn't matter whether I have speakers connected or using the onboard speakers. Any suggestions?

    My Macbook Pro has recently started to mute/unmute itself randomly. VERY FRUSTRATING! It doesn't matter whether I have speakers connected or using the onboard speakers. Any suggestions?
    I have looked at other forums and the fixes suggested do NOT work. 
    What would cause this?
    How is it corrected?

    Hello DChrystal
    Try paying attention to the Keyboard Viewer to see if any keys are being pressed that could be causing the sound to be muted. If it is, try it in another user to see if it is software that is causing the issue or if it is the actual keyboard that is having the issue.
    One or more keys on the keyboard do not respond
    http://support.apple.com/kb/ts1381
    Regards,
    -Norm G.

  • Switches to mute by itself during a call and keeps dropping calls

    Phone goes to mute while speaking without pushing mute button.  Also started dropping calls.  Anyone have similar issues they have solved?

    Basics from the User's Guide is reset, restart, restore (first from backup then as new).  Try each of these in order until the issue is resolved.
    Also, please refrain from posting personal contact information in these public, user to user support forums, unless you just like spam.

  • Ipod Going to mute on itself

    Hi, i am having the problem that my iPod keeps going into mute while watching video or even when just browsing the web. I have tried restoring and did factory setting but nothing happend it is still the same. P.S i am out of warrenty so pls do not suggest that. THANK YOU FOR YOUR HELP I REALLY APRICIATE IT.
    so as u see above and after when it turns normal it pauses the video and the volume thing comes back

    When restoring to factory settings/new iPod fails to resolve a problem that indicates a hardware problem. You can make an appointment at the Genius Bar of an Apple store and hear what they have to say.

  • SOLVED: N8 switched itself off, wouldn't turn on

    Out of the blue, my phone powered down and wouldn't turn on again.  
    Did this happen to anyone else before?  
    I attached the power cable, but it didn't charge.  
    Tried different things, but nothing worked.  
    I left it for a while and googled the issue.  
    THIS SOLVED IT: 
    I held the power button for about 15 seconds, after which it vibrated.  Then it turned on, as if nothing had happened.  
    Some info about what I did:
    Before this happened, an icon in the toolbar was indicating that the phone wanted to sync (even though no app was open or scheduled to sync anyways), and it kept saying "Mobile data off", which it was.  
    I had wifi on and connected.  
    I opened the Maps app, and then then it just turned off.  

    Well, the sleep/wake button is also the power button. If you cannot use it to turn on, then you cannot use it to perform a reset by holding it and the home button together until you see the Apple logo.Those are the only two ways to turn the device on. You can try letting the battery go completely dead and then trying to plug it in. After it has charged for 20-30 minutes, the device may come back on. But, without the sleep/wake button, there is no other way to turn the device on or off.

  • [SOLVED] dd looped itself or stuck

    I went
    sudo dd bs=4M if=x86_64.iso of=/dev/sdb && sync
    and it's working 12 hours now... I don't think it should be like that and
    sudo kill -USR1 6331
    does nothing, no output about current state. Still, my USB stick is blinking like it's being written. I don't want to stop it as I don't want to wait another day if it's all right and just takes a lot of time... or should I? What could be the reason?
    Edit: well, I've turned it off, it was 100M remaining... my bad but now I know it actually can be THAT slow. ;-)
    Last edited by smsware (2014-04-11 14:03:38)

    @smsware, instead of using the "&& sync" afterwords you can simply use
    # dd if=/path/to/archiso of=/dev/sdb bs=4m conv=fdatasync,fsync
    dd man page wrote:       fdatasync
                  physically write output file data before finishing
           fsync 
                  likewise, but also write metadata

  • Getting broken by itself dc in cbs consollidation build space

    Hi All
    Assembling of components failed in CMS under Assemble tab.Reason was brken DC in CBS consollidation build space.
    I compared both CBS Development and Consolllidation build space and i found some build error in CBS Consollidation build space only.Even i have created a new activity in CBS Development build space and checked in that activity and relesae it to Consollidation of CMS but still the DC state in CBS Consollidation Build Space is showing as breken by it self only.
    Can anybody tell me how i will solve broken by itself DC in CBS Consollidation Build space?
    Thanks
    Susmita

    Hi
    Hi Marina,
    I ahve checked the Build log for CBS Consollidation track.The build log shows some code error.How we will solve code error present in Consollidation track.Below is the log file:
    Development Component Build (2008-08-13 08:26:20)
      Component name: DisplaySalesOrderDC
      Component vendor: wartsila.com
      SC compartment: wartsila.com_ETOOLS2_1
      Configuration: XWD_etool2_C
      Location: XWD_etool2_C
      Source code location: http://dbcixwd.wartsila.com:53100/dtr/ws/etool2/wartsila.com_ETOOLS2/cons/active/DCs/wartsila.com/DisplaySalesOrderDC/_comp/
      DC root folder: /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/DisplaySalesOrderDC/_comp/
      DC type: Web Dynpro
      Host: fis0199.wartsila.com
    DC Model check:
              [dcmake] All used DCs are available locally
              [dcmake] validating dependency to build plugin "sap.com/tc/bi/bp/webDynpro"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/cmi"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/ddicruntime"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/ddic/metamodel/content"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wd/webdynpro"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/logging"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/tc/wdp/metamodel/content"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.proxy.framework"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.aii.util.misc"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.exception"
              [dcmake] validating dependency to  public part "default" of DC "sap.com/com.sap.mw.jco"
              [dcmake] validating dependency to  public part "SalesOrderDropdowns" of DC "wartsila.com/SalesOrderModelDC"
              [dcmake] validating dependency to  public part "ReferenceObjectsSearch" of DC "wartsila.com/ReferenceObjectsSearchDC"
              [dcmake] validating dependency to  public part "CustomerCreatedByUserSearch" of DC "wartsila.com/CustomerCreatedByUserSearchDC"
              [dcmake] validating dependency to  public part "VendorWBSElementPartnerSearch" of DC "wartsila.com/VendorWBSPartnerSearchDC"
              [dcmake] validating dependency to  public part "Validations" of DC "wartsila.com/ValidationsDC"
              [dcmake] validating dependency to  public part "SearchSalesOrder" of DC "wartsila.com/SearchSalesOrderModelDC"
              [dcmake] validating dependency to used DC "wartsila.com/GetSalesOrderDetailsModelDC"
              [dcmake] DC model check OK
    Start build plugin:
              [dcmake] using build plugin: sap.com/tc/bi/bp/webDynpro
              [dcmake] starting build plugin from : /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/
    Build Plugin 'WebDynproPlugin', Version 6.40 SP 15  (630_VAL_REL, built on 2005-11-25 00:23:07 CET)
      development component: DisplaySalesOrderDC (wartsila.com)
                       type: Web Dynpro
         software component: ETOOLS2 (wartsila.com)
                   location: XWD_etool2_C
            source location: http://dbcixwd.wartsila.com:53100/dtr/ws/etool2/wartsila.com_ETOOLS2/cons/active/
              build variant: default
          plugin start time: 2008-08-13 08:26:21 GMT-05:00 (EDT)
                    Java VM: Java HotSpot(TM) Server VM, 1.4.2 1.4.2.17-071106-08:12-IA64N IA64 (Hewlett-Packard Company)
    General options:
    convert *.xlf to *.properties: yes
    include sources for debugging: yes
    Reading BuildInfrastructure extension from DC tc/bi/wdtech (sap.com)
    Reading BuildInfrastructure extension from DC tc/bi/ddictech (sap.com)
    Reading BuildInfrastructure extension from DC tc/bi/javatech (sap.com)
    Reading BuildInfrastructure extension from DC tc/bi/util (sap.com)
    Added technology 'sap.com/tc/bi/core'
    Added technology 'sap.com/tc/bi/javatech'
    Added technology 'sap.com/tc/bi/ddictech'
    Added technology 'sap.com/tc/bi/wdtech'
    Plugin initialized in 0.463 seconds
    Preparing data context..
    No 'default' JDK defined, will use running VM.
    Data context prepared in 0.085 seconds
    Executing macro file..
      Using macro file:     /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/bi/bp/webDynpro/_comp/gen/default/public/webDynpro/macros/build.vm
      Creating output file: /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/DisplaySalesOrderDC/_comp/gen/default/logs/build.xml
    Macro file executed in 0.219 seconds
    Starting Ant..
      Using build file:     /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/DisplaySalesOrderDC/_comp/gen/default/logs/build.xml
      Using build target:   build
      Generation folder:    /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/t/767BD110F6EFA359644100F904A02973
    Ant build started at 2008-08-13 08:26:23 GMT-05:00 (EDT)
    Using Ant version 1.5.4
    prepare:
         [mkdir] Created dir: /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/DisplaySalesOrderDC/_comp/gen/default/deploy
    gen:
         [ddgen]
         [ddgen] [Info]    Property deployment is true: Deployment information is provided!
         [ddgen] [Info]    Property sourcepath: /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/DisplaySalesOrderDC/_comp/src/packages
         [ddgen] [Info]    Property targetpath: /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/t/767BD110F6EFA359644100F904A02973/gdd
         [ddgen] [Info]    Property archivename: wartsila.com~DisplaySalesOrderDC
         [ddgen] [Info]    Property vendor: wartsila.com
         [ddgen] [Info]    Property dcname: DisplaySalesOrderDC
         [ddgen] [Info]    Property language: Available languages are automatically determined!
         [ddgen] [Info]    Property addpaths ...
         [ddgen] [Info]       SapMetamodelWebdynproContent.zip - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
         [ddgen] [Info]       SapMetamodelDictionaryContent.zip - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
         [ddgen] [Info]       wartsila.comVendorWBSPartnerSearchDCVendorWBSElementPartnerSearch.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/VendorWBSPartnerSearchDC/_comp/gen/default/public/VendorWBSElementPartnerSearch/lib/java
         [ddgen] [Info]       exception.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       wartsila.comGetSalesOrderDetailsModelDCSalesOrderDetails.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/GetSalesOrderDetailsModelDC/_comp/gen/default/public/SalesOrderDetails/lib/java
         [ddgen] [Info]       wartsila.comSearchSalesOrderModelDCSearchSalesOrder.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/SearchSalesOrderModelDC/_comp/gen/default/public/SearchSalesOrder/lib/java
         [ddgen] [Info]       wartsila.comCustomerCreatedByUserSearchDCCustomerCreatedByUserSearch.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/CustomerCreatedByUserSearchDC/_comp/gen/default/public/CustomerCreatedByUserSearch/lib/java
         [ddgen] [Info]       SapMetamodelWebdynproContent.zip - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproadmin.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynprobasesrvc.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproclientserver.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynpromodelimpl.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynpromodel_dynamicrfc.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynpropdfobject.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproprogmodel.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproruntime_designtime_coupling.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproruntime_designtime_coupling_api.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproruntime_repository.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproruntime_repository_pmr.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       webdynproservices.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       wartsila.comSalesOrderModelDCSalesOrderDropdowns.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/SalesOrderModelDC/_comp/gen/default/public/SalesOrderDropdowns/lib/java
         [ddgen] [Info]       cmiapi.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       aii_proxy_rt.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       SapDictionaryTypeServices.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       SapDictionaryTypesRuntime.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       wartsila.comValidationsDCValidations.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/ValidationsDC/_comp/gen/default/public/Validations/lib/java
         [ddgen] [Info]       aii_util_misc.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       logging.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       logging.perf.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       jrfc.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]       wartsila.comReferenceObjectsSearchDCReferenceObjectsSearch.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/ReferenceObjectsSearchDC/_comp/gen/default/public/ReferenceObjectsSearch/lib/java
         [ddgen] [Info]       SapMetamodelDictionaryContent.zip - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
         [ddgen] [Info]    Initialize generation templates from configuration jar:file:/usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/bi/extddic/_comp/gen/default/public/def/lib/java/SapDictionaryGenerationCore.jar!/DictionaryGenerationConfigurationCompiled.xml
         [ddgen] [Info]    Generating datatypes/com/wartsila/dateformat/DateFormat.gsimpletype
         [ddgen] [Info]    Generating datatypes/com/wartsila/dateformat/PackagePointer.java
         [ddgen] [Info]    Generating datatypes/com/wartsila/dateformat/simpleTypesResource.properties
         [ddgen] [Info]    Generating datatypes/com/wartsila/getmaterial/types/GetMaterial.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getsalesordertypes/types/GetSalesOrderTypes.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getpartner/types/GetPartner.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getequipment/types/GetEquipment.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getwbselement/types/GetWBSElement.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/gettrackingurl/types/GetTrackingUrl.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getfunctionallocation/types/GetFunctionalLocation.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getcswbselement/types/GetCSWBSElement.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/searchsalesorder/types/SearchSalesOrder.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getsalesorganization/types/GetSalesOrganization.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getmaterialrevision/types/GetMaterialRevision.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getshippingpoint/types/GetShippingPoint.gdictionary
         [ddgen] [Info]    Generating datatypes/com/wartsila/getvendor/types/GetVendor.gdictionary
         [ddgen] [Info]    Generating dbtables/sdmDeployDd.xml
         [ddgen] [Info]    Generation finished (2 seconds)
         [ddgen]
         [timer] Data dictionary generator finished in 2.654 seconds
         [wdgen]
         [wdgen] [Info]    Property deployment is true: Deployment information is provided!
         [wdgen] [Info]    Property sourcepath: /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/DisplaySalesOrderDC/_comp/src/packages
         [wdgen] [Info]    Property targetpath: /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/t/767BD110F6EFA359644100F904A02973/gwd
         [wdgen] [Info]    Property archivename: wartsila.com~DisplaySalesOrderDC
         [wdgen] [Info]    Property vendor: wartsila.com
         [wdgen] [Info]    Property dcname: DisplaySalesOrderDC
         [wdgen] [Info]    Property language: Available languages are automatically determined!
         [wdgen] [Info]    Property addpaths ...
         [wdgen] [Info]       SapMetamodelWebdynproContent.zip - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
         [wdgen] [Info]       SapMetamodelDictionaryContent.zip - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/bi/extmm/_comp/gen/default/public/def/lib/model
         [wdgen] [Info]       wartsila.comVendorWBSPartnerSearchDCVendorWBSElementPartnerSearch.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/VendorWBSPartnerSearchDC/_comp/gen/default/public/VendorWBSElementPartnerSearch/lib/java
         [wdgen] [Info]       exception.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/com.sap.exception/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       wartsila.comGetSalesOrderDetailsModelDCSalesOrderDetails.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/GetSalesOrderDetailsModelDC/_comp/gen/default/public/SalesOrderDetails/lib/java
         [wdgen] [Info]       wartsila.comSearchSalesOrderModelDCSearchSalesOrder.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/SearchSalesOrderModelDC/_comp/gen/default/public/SearchSalesOrder/lib/java
         [wdgen] [Info]       wartsila.comCustomerCreatedByUserSearchDCCustomerCreatedByUserSearch.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/CustomerCreatedByUserSearchDC/_comp/gen/default/public/CustomerCreatedByUserSearch/lib/java
         [wdgen] [Info]       SapMetamodelWebdynproContent.zip - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wdp/metamodel/content/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynproadmin.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynprobasesrvc.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynproclientserver.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynpromodelimpl.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynpromodel_dynamicrfc.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynpropdfobject.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynproprogmodel.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynproruntime_designtime_coupling.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynproruntime_designtime_coupling_api.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynproruntime_repository.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynproruntime_repository_pmr.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       webdynproservices.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/wd/webdynpro/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       wartsila.comSalesOrderModelDCSalesOrderDropdowns.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/SalesOrderModelDC/_comp/gen/default/public/SalesOrderDropdowns/lib/java
         [wdgen] [Info]       cmiapi.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/cmi/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       aii_proxy_rt.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/com.sap.aii.proxy.framework/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       SapDictionaryTypeServices.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       SapDictionaryTypesRuntime.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/ddic/ddicruntime/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       wartsila.comValidationsDCValidations.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/ValidationsDC/_comp/gen/default/public/Validations/lib/java
         [wdgen] [Info]       aii_util_misc.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/com.sap.aii.util.misc/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       logging.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       logging.perf.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/logging/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       jrfc.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/com.sap.mw.jco/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]       wartsila.comReferenceObjectsSearchDCReferenceObjectsSearch.jar - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/ReferenceObjectsSearchDC/_comp/gen/default/public/ReferenceObjectsSearch/lib/java
         [wdgen] [Info]       SapMetamodelDictionaryContent.zip - /usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/ddic/metamodel/content/_comp/gen/default/public/default/lib/java
         [wdgen] [Info]    Initialize generation templates from configuration jar:file:/usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/sap.com/tc/bi/extwd/_comp/gen/default/public/def/lib/java/SapWebDynproGenerationCore.jar!/WebDynproGenerationConfigurationCompiled.xml
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.ShipmentInfoView --> ContextValueAttribute ctx_boxNumber [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.ShipmentInfoView --> TextView ctx_boxNumber_editor [text]: Context element and property are not compatible
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.ShipmentInfoView --> TextView TextView2: UIElement does not have a label
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> ContextValueAttribute ctx_deliveryNumber [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> ContextValueAttribute ctx_backOrderStatusQuantity [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> ContextValueAttribute ctx_deliveryNumber [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> ContextValueAttribute ctx_price [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> ContextValueAttribute ctx_quantityOrdered [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> ContextValueAttribute ctx_quantityDelivered [type]: Type missing (Hint: The type property must be set to a simple type, a built in type or any java native type)
         [wdgen] [Warning] com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70_94 [tooltip]: The text consists only of special characters and/or numbers.
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_56 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_64 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_52 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_60 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_60_16 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_4 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68_80 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70_82 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68_86 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70_88 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68_92 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70_94 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView ctx_itemStatus_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView ctx_quantityDelivered_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView ctx_quantityInBackOrderStatus_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView ctx_price_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView ctx_deliveryNumber_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView PartnerFunction_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView PartnerNumber_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView PartnerName_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView2 [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView PostalCode_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView Location_editor [text]: Context element and property are not compatible
         [wdgen] [Error]   com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> LinkToAction NO_editor [text]: Context element and property are not compatible
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_54: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_56: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_62: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_64: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_50: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_52: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_58: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_60: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_60_16: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_2: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_4: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_72: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68_74: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_78: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68_80: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70_82: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_84: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68_86: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70_88: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_90: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68_92: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_70_94: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_66_9: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView3_48_68_11: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView5_4_13: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView5_4_18: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView5_4: UIElement does not have a label
         [wdgen] [Info]    com.wartsila.salesorderdetailsurlcomp.TrackSalesOrderDetailsView --> TextView TextView5: UIElement does not have a label
         [wdgen] [Info]    Catching throwable null
         [wdgen] [Info]    com.sap.webdynpro.generation.ant.GenerationAntTaskError
         at com.sap.webdynpro.generation.ant.GenerationAnt.showCheckResult(GenerationAnt.java:153)
         at com.sap.ide.webdynpro.generation.Generation.check(Generation.java:2024)
         at com.sap.ide.webdynpro.generation.Generation.generatePersistentComponent(Generation.java:1295)
         at com.sap.ide.webdynpro.generation.console.GenerationConsole.generate(GenerationConsole.java:172)
         at com.sap.webdynpro.generation.ant.GenerationAnt.main(GenerationAnt.java:50)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.webdynpro.generation.ant.WDGenAntTask.execute(WDGenAntTask.java:211)
         at org.apache.tools.ant.Task.perform(Task.java:341)
         at org.apache.tools.ant.Target.execute(Target.java:309)
         at org.apache.tools.ant.Target.performTasks(Target.java:336)
         at org.apache.tools.ant.Project.executeTarget(Project.java:1339)
         at com.sap.tc.buildplugin.techdev.ant.util.AntRunner.run(AntRunner.java:115)
         at com.sap.tc.buildplugin.AbstractAntBuildAction.execute(AbstractAntBuildAction.java:65)
         at com.sap.tc.buildplugin.AbstractPlugin.handleBuildStepSequence(AbstractPlugin.java:217)
         at com.sap.tc.buildplugin.AbstractPlugin.performBuild(AbstractPlugin.java:193)
         at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
         at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
         at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
         at java.lang.reflect.Method.invoke(Method.java:324)
         at com.sap.tc.buildtool.PluginCommunicator.maybeInvoke(PluginCommunicator.java:114)
         at com.sap.tc.buildtool.PluginCommunicatorV2.communicate(PluginCommunicatorV2.java:42)
         at com.sap.tc.buildtool.PluginHandlerImpl.handlePluginCommunication(PluginHandlerImpl.java:345)
         at com.sap.tc.buildtool.PluginHandlerImpl.execute(PluginHandlerImpl.java:175)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1726)
         at com.sap.tc.devconf.impl.DCProxy.make(DCProxy.java:1498)
         at com.sap.tc.buildcontroller.CBSBuildController.build(CBSBuildController.java:727)
         at com.sap.tc.buildcontroller.CBSBuildController.execCommand(CBSBuildController.java:503)
         at com.sap.tc.buildcontroller.CBSBuildController.evalCmdLine(CBSBuildController.java:442)
         at com.sap.tc.buildcontroller.CBSBuildController.run(CBSBuildController.java:314)
         at com.sap.tc.buildcontroller.CBSBuildController.exec(CBSBuildController.java:252)
         at com.sap.tc.buildcontroller.CBSBuildController.mainLoop(CBSBuildController.java:207)
         at com.sap.tc.buildcontroller.CBSBuildController.main(CBSBuildController.java:168)
         [wdgen] ERROR: Unknown exception during generation null (com.sap.webdynpro.generation.ant.GenerationAntTaskError)
         [wdgen] ERROR: Generation failed due to errors (3 seconds)
    Ant build finished with ERRORS
    file:/usr/sap/MWD/DVEBMGS28/j2ee/cluster/server0/temp/CBS/14/.B/2039/DCs/wartsila.com/DisplaySalesOrderDC/_comp/gen/default/logs/build.xml:134: [Error]   Generation failed!
    Ant build finished at 2008-08-13 08:26:30 GMT-05:00 (EDT), Duration: 6.39 seconds
    Build finished with ERROR
    Cleaning up.
    Total build plug-in runtime: 9.055 seconds
       Request Log
    Thanks
    Susmita

  • Win 8.1 Sound mutes and unmutes randomly

    Over the past week or so I have experienced a problem with the audio on my HP Envy Touchsmart 15-j002ax Notebook
    Randomly, my sound will mute/unmute itself, sometimes many times in a row. I'm using the built in Radeon HD Audio with the newest HP drivers (according to the HP Support website)
    When the speakers mute or unmute an icon appears automatically in the top let hand side of the the screen and it displays the percentage of volume, the same as the speakers icon in the system tray. However the percentage is displayed in a black box icon and is not the normal speaker icon. The f6 key on my keyboard illuminates when the random mute occurs and disappears when the random unmute occurs. Depressing the f6 key when a mute occurs does nothing. However pressing the volume adjustment keys f7 or f8 unmutes the speakers. Also if I display the system tray speaker icon and click the mute symbol the sound is unmuted
    However, the random muting and unmuting keeps occurring and I cannot control it or any length of time

    Hello, @jgunner1948 
    It appears that you're having issues with the audio in your notebook, that it's being randomly muted and unmute. I will attempt to assist you.
    Start with this document: No Sound from the Speakers (Windows 8). This may have steps that can help you.
    If nothing there helps, go into Device Manger > sound, video and game controllers > right click on the audio driver(s) choose to uninstall (make sure to check the box to delete the driver).
    Download these drivers: HP ENVY TouchSmart 15-j002ax Notebook PC Drivers (which you may have) and install. Restart your notebook.
    If this fails to help, try a System Refresh.
    Start with this, let me know how it goes for you.
    Thank you for posting on the HP Forums.
    I worked on behalf of HP.

  • TouchSmart IQ500 and Win8?

    Hello.
    HP TouchSmart IQ500.
    System #: FK936AA-ABG
    Serial #: 3CR----B32(blanked for security)
    Model #: IQ518a
    What is HP's position on this machine and Win8?
    I have one of these machines running Win8 64-bit, but it often gives problems.
    Video driver issues with the screen going blank(which I learn by reading other posts, is quite a common issue with Win8 on the TouchSmart machines), and recently, sound problems, where the sound just mutes by itself, and there is nothing you can do to make the sound work again.  Sometimes, if you wait a while it works again, but the sound can just fail half way through a movie for no apparent reason.  There is NO warning, wierd sounds or anything - it just dies and you can't get sound again from that point.  Rebooting SOMETIMES fixes the problem, but only with about a 75% success rate.  It is NOT the application causing the problem with the sound - no applicaiton that uses sound will output it - not even the Windows Sound app in Control Panel.
    So, at the end of the day, can someone at HP please confirm for me if this model machine is actually compatible with Win8?
    I am guessing that it is NOT supported at this stage, as I have not been able to find any Win8 specific drivers for this model machine, unless I am not looking in the right place, and that is quite possible!!!!
    Thanks for any replies.
    This question was solved.
    View Solution.

    Graeme1974,
    This is a peer-to-peer user supported forum. HP maintain no official presence on this forum. Any response received by an employee is that of their own and not HPs.
    THIS is HP's position on Windows 8 and any non-Windows 8 HP computer;
    Not all Windows 8 features may be available on all PCs.
    Your particular experience with Windows 8 will be determined by the capabilities of your PC.
    HP is providing upgrade instructions and drivers will be available for most Windows 7 systems sold after 1st October 2011.
    If you want to restore the original operating system after upgrading, you must create HP recovery media before you upgrade.
    Please note that if you purchased your system prior to October 1, 2011, HP has not tested these PCs or developed Windows 8 upgrade instructions or drivers for them. Upgrading such systems may be difficult or impossible.
    Please send KUDOs
    Frank
    {------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
    Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
    This is a user supported forum. I am a volunteer and I don't work for HP.
    HP 15t-j100 (on loan from HP)
    HP 13 Split x2 (on loan from HP)
    HP Slate8 Pro (on loan from HP)
    HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
    HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
    HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
    HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
    HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

  • ACS 5.3 Authorization problem with using Identity Groups in Access Policy Rule

    Hello guys, I am found a problem which I can't solve regarding authorization with using Identity Groups in Access Policy rule.
    ACS version: 5.3.0.40.6 (internal build B.839)
    I have very simple RADIUS Authorization rule which authorize user on behalf of right Identity Group.
    Requested Identity Group exist
    Testing user is created in Internal Users and has assigned requested Identity Group
    Radius Access Policy: 
    Authentication against Identity Store Sequence, where authorization server is external RSA SecurID device and additional attributes retrieval is configured from Internal Users.
    Authorization is very simple – One Rule with only one Condition which is: Identity Group - in - Requested_Testing_Rule. Then Default rule is set to Deny.
    When I will try login with my testing user then authentication against RSA SecurID is OK, but authorization will be denied by Default rule – It looks like my Rule with Identity Group is totally omitted.
    I am managing several other ACS servers (version 5.3 but with older patches) where similar rules are working without problem.
    What I am tested:
    Remove testing user and create his account again.
    Rename Identity Group
    Use another Identity Group
    Remove Access Policy rule and create it again
    Use Compound Condition: System:Identity Group
    Use Compound Condition: System:UserID instead of Identity Group in Rule (it is working without problem)
    Do you have any idea where problem can be?

    OK guys, it started working yesterday without any configuration change. Maybe it was some database inconsistence wich was solved by ACS itself.

  • Oracle 10g RAC+ASM - Storage Issue

    I’ve an issue related to Oracle 10g RAC.
    I’ve 2 node cluster each being Dell 2850 Server with RHEL 4.0
    I’ve EMC CX300 SAN storage with following partitions
    /orasoft     10 Gb          OCFS2 File system
    /oracrs          2 Gb          OCFS2 File system
    /orabackup      100 Gb          OCFS2 File system
    The datafiles are on ASM which is not directly visible in OS.
    I’ve common Oracle Home installed in /orasoft/db_1 which is shared by both nodes in cluster.
    I’ve faced an issue recently related to EMC storage.
    The /orasoft partition displays 1.4 Gb space available using df command.
    With both nodes sharing the common Oracle Home (/orasoft/db_1), when ever I try to touch a file I get an error as No Space left on device. I’m unable to start any service with the same reason.
    Is this setup correct ??
    Can anyone help me with this storage issue ??

    Hi,
    If you create a new diskgroup you may be to add the same diskgroup to parameter file or spfile and which will be needing down time.
    sugestion: Instead of creating new diskgroup you should to add disk to existing group.if you add asm disk to existing group your all problem will be solved and Oracle itself will be managing all.And than i am sure no need to add entry in the parameter or spfile like +db_create_file_dest=.....
    regards,
    Sher khan

  • Process huge number of records in XI

    Hello
    I am having a simple scenario where I am sending details from SAP to legacy system on weekly basis. I am having SAP ABAP proxy as a sender and file as a receiver.
    My problem is when the data is huge (around 600,000 records) the its giving RFC timeout error on SAP ECC side. I tried to sending limited number of records per submit to XI but it creates multiple files on receiving FTP server.
    Instead of that can I use collect pattern of BPM to collect messages in BPM? Will it not be an overhead using BPM in this case as the data is tooo huge?
    If someone has already tackeled this problem pl respond.
    Thanks in advance.
    Regards
    Rajeev

    Hi Rajeev,
    dont use BPM for solving that, BPM itself has still a lot performance problems.
    If possible, split the 600.000 at R/3 side into several proxy requests. If required, use modus "add lines" of the file adapter to collect the messages again. You should think about to send the messages "Exacly Once In Order" to avoid processing more than one message at the same time.
    Regards,
    Udo

  • Wired network

    I just installed Arch from Opensuse 11 following this guide  http://wiki.archlinux.org/index.php/Ins … ting_Linux .
    I installed Gnome 2.24 desktop through OpenSuse also. However, when I log into Arch, the internet (wired) is not working.
    I have installed networkmanager. In order to get it working, i messed around with /etc/rc.conf a lot. And now the internet is even more messed up.
    As a first time user of Arch, I have no idea what wrong I have done. Now I cannot even install packages onto Arch through opensuse chroot  /bin/bash -ing into the Arch system. The internet on opensuse is working fine, but not on Arch.
    I have read the myriad of guides on the Arch site regarding networking and network manager. I would like to shift to wicd now.
    However, if the problem can be solved through networkmanager itself, then I won't shift.
    So here is my question:
    Say I have a wired eth0 connection whose IP address 10.10.1x.xx and primary DNS is 10.10.0.x and the subnet mask is 255.255.xxx.xxx.
    What should be my entry in rc.conf and hosts files? (I do not know how to find my broadcast address).
    at present my rc.conf reads:
    HOSTNAME="myhost"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # DHCP: Set your interface to "dhcp" (eth0="dhcp")
    # Wireless: See network profiles below
    eth0="eth0 10.10.xx.x netmask 255.255.xxx.xxx broadcast 10.10.xx.xx"
    INTERFACES=(lo !eth0 !wlan0 wmaster0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 10.10.xx.xx"
    ROUTES=(gateway)
    DAEMONS=(syslog-ng !network netfs @crond avahi-daemon avahi-dnsconfd hal dbus dhcdbd networkmanager gdm @fam dhclient)
    and my /etc/hosts/ file reads
    # /etc/hosts: static lookup table for host names
    #<ip-address> <hostname.domain.org> <hostname>
    127.0.0.1 localhost.localdomain localhost
    # End of file
    I also am very confused about what to enable and disable in rc.conf, for the networkmanager to work.
    Could someone please please help me out with this setup? I have read a lot on the site and gotten more confused. I would really appreciate if you could just walk me through this step.
    Thanks a ton in advance.
    Last edited by viperskunk (2008-11-14 16:43:31)

    OK. Let's make things simpler.
    Here is a sample of a working /etc/rc.d file.
    /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # HARDWARECLOCK: set to "UTC" or "localtime"
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_CA.utf8"
    HARDWARECLOCK="UTC"
    TIMEZONE="Canada/Eastern"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # Scan hardware and load required modules at bootup
    MOD_AUTOLOAD="yes"
    # Module Blacklist - modules in this list will never be loaded by udev
    MOD_BLACKLIST=(snd-pcsp)
    # Modules to load at boot-up (in this order)
    # - prefix a module with a ! to blacklist it
    MODULES=(skge vboxdrv)
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    HOSTNAME="dragonfly"
    # Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available
    # interfaces.
    # Interfaces to start at boot-up (in this order)
    # Declare each interface then list in INTERFACES
    # - prefix an entry in INTERFACES with a ! to disable it
    # - no hyphens in your interface names - Bash doesn't like it
    # Note: to use DHCP, set your interface to be "dhcp" (eth0="dhcp")
    lo="lo 127.0.0.1"
    eth0="eth0 192.168.1.21 netmask 255.255.255.0 broadcast 192.168.1.255"
    INTERFACES=(lo eth0)
    # Routes to start at boot-up (in this order)
    # Declare each route then list in ROUTES
    # - prefix an entry in ROUTES with a ! to disable it
    gateway="default gw 192.168.1.1"
    ROUTES=(gateway)
    # Enable these network profiles at boot-up. These are only useful
    # if you happen to need multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network-profiles
    #NET_PROFILES=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    DAEMONS=(syslog-ng network @cups ntpd @crond @alsa @hal gdm)
    # End of file
    A few things to notice:
    1. the line MODULES=(skge vboxdrv) will be different in your machine, so for starters; unless you know you need some specific modules live it blank eg: MODULES=()
    2. HOSTNAME='THE_NAME_OF_YOUR_MACHINE' is the name you give the machine to identify it in the network. I called mine dragonfly.
    3. Notice that I', using the 192.168. range (as opposed to 10.10.x.x) so in your case just use the IP address values you chose for your network and notice also that the gateway **has** a value.
    4. In the DAEMONS line you will see some applications preceded by '@' like @cups. This loads the appps in the background which will speed up your boot time but you  **do not have ** to use it that way and you can safely remove the '@' symbol without causing any problems.
    Use this file as an example (or even copy and paste it into your system) to modify your /etc/rc.conf so that your system will work.
    If you need help after doing this ... just ask
    R.

  • Memory leak in ODBC Driver version 8.1.7.8?

    We have a web application connected to an 8.1.7 database on a MS Windows 2000 SP 2 server.
    We recently upgraded ODBC driver from 8.1.7.7 to 8.1.7.8 and found that we ran out of virtual memory.
    On further investigations, a simple refresh of our summary web page (going to the database to select a small recordset - even when there are only 2 records with 6 small VARCHAR2 fields) causes the virtual memory usage to increase by approximately 1Mb each refresh.
    The same refresh using driver 8.1.7.7 occasionally increases the VM usage by 4Kb!
    Is there a memory leak in ODBC driver version 8.1.7.8?

    Hello Thomas,
    thanks for your tips, but they did not help. Activating Connection Polling did not change anything. And opening another connection did not help, either. I did it the following way:
    Sub memtest2()
    Dim conODBC As New ADODB.Connection
    conODBC.ConnectionString = "Data Source='xxxx';User ID='xxx';Password='xxx'"
    conODBC.Open
    Dim Rs1 As Recordset, Rs2 As Recordset, DB1 As Database
    Set DB1 = CurrentDb
    Set Rs1 = DB1.OpenRecordset("select id from artikel")
    Do While Not Rs1.EOF
        Set Rs2 = DB1.OpenRecordset("select * from artikel where id=" & Rs1("id"))
        'do something
        Rs2.Close
        Set Rs2 = Nothing
        Rs1.MoveNext
    Loop
    Rs1.Close
    Set Rs1 = Nothing
    DB1.Close
    Set DB1 = Nothing
    conODBC.Close
    End Sub
    Perhaps one of you has another tip how this can be done.
    @Lukasz:
    using a seperate ADODB.Connection works fine, but that does not solve the problem itself. At first I would have to rewrite much code and the second much bigger thing is that the memory leak occurs even when working with bound forms in MS Access. For example: I have one large form with many subforms on it. If i go from record to record on this form the memory usage is increasing dramatically fast and there is no way to influence what kind of connection MS Access is using for bound forms.
    Regards
    Thorstem

Maybe you are looking for