[SOLVED] Mutt having problem connecting to gmail imap

Just yesterday my mutt email was fine connecting to gmail via imap. I didn't touch .muttrc at all. Now when I run mutt it gives the "Connecting to imap.gmail.com ..." message and then times out with the "Connection to imap.gmail.com closed" error and I get an empty inbox. Any ideas on what I should be looking at?
Last edited by mutaphore (2015-01-18 19:19:22)

Offlineimap doesn't get your mail to you quicker - but it definitely does save mutt loading time.  Offlineimap runs as a daemon and keeps a local maildir copy of all your mail.  The main purpose for this is so you can read your mail while offline (hence the name), but an added bonus is that whenever you open mutt, mutt doesn't need to wait for the imap connection/download/sync/whatever - it just reads from the local maildir which is effectively instantaneous*.
EDIT: *often that is.  I do have a 'storage' mailbox with ~5000 emails in it.  When I swtich to that mailbox mutt still takes a second to read the maildir folder.  But if this were in online form only it could take a minute or more.  My inbox which  often holds 50-100 emails loads instantly.

Similar Messages

  • Problem connecting to gmail IMAP

    I cannot connect using wifi to gmail IMAP server although SMTP connection is fine.  I am using a new macbook pro and mountain lion.  problem, occured after I deinstalled Sprint air card software using Clean My Mac.   I deinstalled Sprint software because it was not working well.  Bad idea since there is no new Sprint software that will install with system 10.8.3.  Anybody have any suggetions?

    Offlineimap doesn't get your mail to you quicker - but it definitely does save mutt loading time.  Offlineimap runs as a daemon and keeps a local maildir copy of all your mail.  The main purpose for this is so you can read your mail while offline (hence the name), but an added bonus is that whenever you open mutt, mutt doesn't need to wait for the imap connection/download/sync/whatever - it just reads from the local maildir which is effectively instantaneous*.
    EDIT: *often that is.  I do have a 'storage' mailbox with ~5000 emails in it.  When I swtich to that mailbox mutt still takes a second to read the maildir folder.  But if this were in online form only it could take a minute or more.  My inbox which  often holds 50-100 emails loads instantly.

  • I am having problems connecting to 3g after updating to ios 6.1 (iphone 5, 32gb, black)

    i am having problems connecting to 3g since i updated my iphone to ios 6.1, the update 6.1.2 didnt solve the problem, i am having problems connecting to 3g, my phone only shows the symbol E

    I'm having problems too. It eventually connects to 3G but it takes a long time. Try keeping the "Enable 3G" on (if you have the switch) and see if it changes to 3G at some point.

  • I am having problems connecting to home wifi.  It was working, but now all I get is a blank white screen.  I re-booted with no success.

    I am having problems connecting to home wifi.  It was working, but now all I get is a blank white screen.  I re-booted with no success.

    Hi, blank white screen where exactly?
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.5, 10.6, 10.7 & 10.8…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x/10.8.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    If using Wifi/Airport...
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6/10.7/10.8, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    (There may be better or faster DNS numbers in your area, but these should be a good test).
    Click OK.

  • Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    Having problems connecting a late 2011 Macbook Pro 2.2ghz i7 to a Sony KDL-32L5000 using a display miniport to DVI adapter (DVI to VGA cord). The TV is not detecting the macbook. Anyone have this problem?

    You really have to mess with the resoluton, espescially the refresh rate, as it varies from projector to projector, monitor to monitor. Even within the same brand! Because so many manufacturers are trying so many different things to become the next cool kid on the block, and the way the formats are being configured that's now part of the game.
    That's why so many professionally produced corporate shows hire a dedicated projectionist for the video presentations. Too many bugs in the honey.
    Refresh & sesolution are the first things to look at.
    Just so you know that colors in PowerPoint PC, and PowerPoint Mac, don't exactly match... go figure.
    I forgot to mention another thing, sometimes it's the projector that needs to be tweaked.

  • Having problems connecting MacBook Pro 2010 TO vizio 60 " tv

    having problems connecting MacBook Pro 2010 TO vizio 60 " tv using mini displayport to VGA adapter
    non support warning appears pn tv monitor

    However, I still don't get a view of anything on the desktop except for the standard Apple swirl.
    Can you drag windows to the other display?
    In the "Arrangement" tab of "Displays" system preference, you can drag the display pictures to match the actual arrangement, drag the menu bar to the other display, or enable mirroring.

  • Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. scree

    Not sure that I have selected the correct forum.  Hope my questions are clearly stated.
    Having problems connecting iMac(late 2006) running 10.7.5 to a Samsung Flat Screen TV using separate audio/speaker cable and HDMI standard cable, mini-DVI to HDMI video converter.  TV displays generic Apple galaxy background and "some" windows (e.g. screen resolution choices).   It does not show Mail or Safari menus.  System preferences'  display "gathered" the Samsung and chose its resolution.  I did not find a way to select the Samsung as my display.
    In addition to having old hardware, we have Verizon FIOS providing internet and TV access.  Is there any way to make this work for us?  We would like to stream video (Netflix) and view shows from the Web.  Do we need Apple TV to do this?  Or is it not possible with our old iMac?  My husband thinks that our Airport could be a factor. 
    Thank you

    Lately, I have been seeing a lot of posts with users trying to use their Macs/iMacs to mirror their streaming video from their Macs to an HDTV.
    There are, actually, many alternatives to choose from than just from a Mac.
    You need to have or invest in a WiFi capable router for all of these examples.
    Apple TV only integrates with WiFi and newer Mac hardware. So, if you want to have total integrated experience, if you have a 2011 Mac or newer, you might as well pay the $100 for the AppleTV box.
    If you have a older Mac, like I have noticed many users do, then you have other options.
    If you want to elimate long cable clutter and having your Mac at the mercy of your TV all of the time,  you can still use the AppleTV box independently or purchase cheaper alternative media streaming boxes from Roku, Sony, Boxee or any number of electronics manufacturers that now have media streaming boxes and media streaming capability built into DVD/Blu-ray players.
    These eliminate long cable clutter by being close to the HDTV where shorter, less expensive cables can be used.
    Another alternative for iPad users is to use an iPad with the USB/HDMI video adapter and use your iPad as the streaming box. This ties up your iPad in much the same way as it does with your Mac, but again the iPad can be close to the TV and use minimal cables to the TV.
    Another alternative to is to use a combination of an iPad and your Mac to stream content that is only available to stream online from a computer. In this case, you can use a desktop remote app on your iPad and Mac. A good and cheap Desktop Remote app is Splashtop Remote. This allows you to completely connect your iPad remotely, over Wifi, to your iMac desktop. The app streams both video and sound to the iPad which is still connected to your HDTV. The resultant stream video picture will be smaller than the size of your HDTV, but it will still be plenty large enough to watch. Again, if you own a iPad and an Intel Mac, this method also allows minimal cabling to the TV.

  • TS1317 Having problem connecting wi-fi to my Mac pro.  Followed all the steps.  Any suggestions of what I can try next?

    Hi, Having problem connecting my Mac Pro to Wi-Fi.  Followed all the steps.  Any suggestions?  Thanks.

    Hi Sandra,
    Have you tried this?
    Instead of joining it from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.

  • This past month I have been having problems connecting to my home wireless connection. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of server

    This past month I have been having problems connecting to my home wireless connection. I have a MacBook Pro OSX Version 10.6.8. Previously I had no problems whatsoever. I have tried unplugging the wireless router, turning off the wirless airport, deleting the network name from my list of servers and trying to reconnect this way. These methods have worked temporarily, but the same problem keeps coming back. Most of the time my personal wireless connection does not even come up among the list of available networks. My fellow flatmates have PCs and both of them are able to connect to the network without problem.
    The router is a d-link model DIR-615. I am not tech savy, so if any other information need to be provided in order to better understand my situation, please let me know.
    Please help me!

    If I open the list of networks in a window it says "connection timeout," but if I just select it from the drop down it tries for awhile and then stops with no prompt. When I try to run network diagnostics it says "sorry, we can't connect to the internet" (or some solution-free variation of that)

  • Hi I am having problem connecting my mac and iphone6 through AirDrop

    HI I am having problem connecting my mac and iphone6 through Air Drop

    You don't give any information about your Mac but note the quote below which states that it must be a 2012 or later model with Yosemite installed. The quote is from Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support which also contains some other things that may help.
    In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
    your iOS device needs to include a lightning connector
    your iOS device needs iOS 7 or later installed
    your Mac needs to be a 2012 or later model with OS X Yosemite installed
    Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.

  • Hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

    hi i am having problems connecting to internet using ethernet,in the network diagnostics i get all green,except network settings which is orange.i am running mountain lion on intel imac

    hi have done as you said plug ethernet straight into computer and into back of router,and worked straight off,i had the the powerline on extention when imac was up stairs,when i had computer down stairs it still would not work with powerlines even on main wall sockets,so they are getting binned,looks like i will have to move router upstairs,just wondering if i got extention wire from back of openreach box to router upstairs```,would it be ok,,the openreach box is next to my only phone socket in house,which is in back kitchen..any advice would be great,

  • HT201269 I am having problem connecting my iphone 4 Bluetooth with my Sony Viao Net Book and other iphones or other bluethooth enabled devices.

    Having problem connecting my IPHONE 4 with my Sony Viao Net Book and other Bluetooth enabled Devices and would also need information about Syncing.

    Have a look here for Supported Bluetooth Profiles
    http://support.apple.com/kb/HT3647
    SYNCING with iTunes
    See here  >  http://support.apple.com/kb/HT1386
    From Here  >  http://www.apple.com/support/iphone/syncing/

  • Just had a replacement iPhone but having problems connecting to iCloud, any tips?

    Just had a replacement iPhone but having problems connecting to iCloud, any tips?

    What problems?
    When you create your iCloud account with the iPhone's Mail app, the settings are not confirmed?

  • TS4006 i am having problems connecting to wifi at home , i want to do a master reset but cant save to icloud without using wifi ?? any ideas ??

    i am having problems connecting to wifi at home , i want to do a master reset but cant save to icloud without using wifi ?? any ideas ??

    If you can't perform an iCloud backup (which requires wifi), back up to your computer with iTunes.  Connect your phone to your computer, open iTunes, click on the name of your phone in iTunes, go to the Summary tab of your iTunes sync settings and click Back Up Now.
    To troubleshoot your wifi, try unplugging your wireless router for 15 seconds, the plug it back in.  Then go to Settings>General>Reset and tap Reset Network Settings (note: this erases passwords for previously joined networks).  Then rejoin your wifi and see if it works properly now.

  • Repeated connection to Gmail imap server problem.

    I get this message everytime I try to get my Gmail account emails, in Apple Mail: 'The mail server "imap.gmail.com" is not responding.  Verify that you have entered the correct account info in Mail settings." My account info is correct. I didn't change anything and all my settings are correct as far as I know. It first started happening on my iPhone, now on my iMac as well.  I've tried specifying the gmail imap server (in quotes above) in the mail settings for my Gmail account, but to no avail.  MANY people are having the same problem (google it if you don't believe me).  Can anyone help?

    Thank you for your advice, but I did that.... Perhaps 5 times with 2 step verification, 4 without. Finally I Tried changing incoming server to imap.googlemail.com as suggested elsewhere. It just started working within the last 3 minutes!!!!!!! I've been slaving over this computer for hours because of this. The outage may have started it, but seems something new took over. Who knows.

Maybe you are looking for

  • Why does notes keep crashing after upgrading to Yosemite?

    MacPro (Early 2009) OS X 10.10 2x2.93 Quad-Core Intel Xeon 16GB RAM NVIDIA Quadro 4000 2048MB When launching Notes, it crashes every time. Here's what the Mac OS/Notes exec file reads:   11  Foundation                          0x00007fff9beea1a3 __NS

  • Unable to Access Single User Mode on Macbook Air 2012

    I am unable to enter SINGLE USER mode on myMacbook Air 2012....I have made sure that there is no Firmware Password preventing me from doing so...what else could be the reason....any suggestions?

  • Dashboard in BEx 7.0 Excel Analyzer

    I have to develop a dashboard with 7 queries embedded in a single worksheet. All queries have output in the form of tables (grid analysis). I know, how to do that. But, is following a possibility : 1. Keeping size of each table fixed, so I can have w

  • Replacing pram battery

    I will be opening up my iMac (G3 400 early 2001) soon to install a new hard drive. I realized this would be a good time to change the pram battery which is original, but still good. If I do the replacement quickly enough will all the settings be save

  • Web module crashes during export OR upload (Mac OSX 10.5x)

    Been happening more and more for some reason. The number seems to not matter, though typically there are 700 to 1400 images to either export or upload - and both crash LR. I'm on a Mac (OSX 1.5x) running LR 3.2. Actually, we're running TWO macs, and