[SOLVED] My usb drives will not automount

Hi!
I've installed a basic Arch system using XFCE4.
My USB disks and stick will not automount when I insert them. I have added myself to the usual groups.
Manual mounting works however...
What could be the issue?
Last edited by jerik (2013-01-21 00:22:23)

This did the trick: https://wiki.archlinux.org/index.php/Udiskie

Similar Messages

EXTERNAL USB Drive will not open with Snow Leopard

External USB drive will open with SL. The drive icon appears on the desktop. When I click on it, Error message, "The alias USB Drive can't be opened because the original item can't be found." When I click on "Fix Alias", a window pops up and shows the usb drive in a list but does not respond when I click on it. I then tried disk utility and tested the disk and it tested OK. The drive still will not open. This problem started after I installed Snow Leopard. Need Help.
Message was edited by: PHAT ROB

The same error is produced when I try to mount a smb share.
I select the "connect to server" (cmd-K). Input the share info "smb://<user>@<server>/<share_path>
At the auth prompt, I input my credentials.
The error pops up, same as original poster.

External USB drives will not mount under Mountain Lion

Since upgrading to Mountain Lion, two external USB2 drives that I have will not mount and cannot be viewed in the Finder. The same occurs on a 2012 MacBook Air, a 2009 iMac 27 and a 2010 MacMini, all running OS X Mountain Lion version 10.8.2.
Both drives are Samsung Story external USB drives (one is 1.5 GB and the other is 2 GB) and both have been formatted using Mac Disk Utility with a single Mac OS Extended (Journaled) partition, one using Snow Leopard and the other with Lion.
Both still mount correctly on a friends MacBook Pro that is still running Snow Leopard, and I had no problem with the same drives under Lion. Interestingly both can also be connected to Time Capsule USB port and show up correctly.
Both drives mount correctly under Windows 7 on BootCamp partitions that I have on both the 2012 MacBook Air, a 2009 iMac 27. These BootCamp partitions have Paragon HFS+ installed so I can read Mac formated drives.
Both drives show up in Disk Utility, but when attempt to mount the drives I get the message "The disk could not be mounted. Try running First Aid on the disk and retry mounting." I can run Repair in First Aid on the disk and get the message that the volume appears OK, but again have the same problem when I attempt to mount the disk.
I have also tried using Disk Utility 3,2, but still cannot mount the drives, though the program indicates there is no problem with the drives.
I have other portable USB including a Samsung portable USB2 drive, and two external USB3 drives, and I don't have problems with them.
There is clearly a problem with Mountain Lion with accessing (mounting) these Samsung Story USB drives, and the problem appears to be with Mountain Lion itself as the problem did not occur on the same Macs with Lion and does not occur with Bootcamp partitions on the machines.
I have a lot of time searching forums, but I have not found anyone with an identical problem.
I sure hope someone can help or that Apple come up with a fix for this issue which has only developed since the update to Mountain Lion.

bj10au wrote:
Since upgrading to Mountain Lion, two external USB2 drives that I have will not mount and cannot be viewed in the Finder. The same occurs on a 2012 MacBook Air, a 2009 iMac 27 and a 2010 MacMini, all running OS X Mountain Lion version 10.8.2.
Both drives are Samsung Story external USB drives (one is 1.5 GB and the other is 2 GB) and both have been formatted using Mac Disk Utility with a single Mac OS Extended (Journaled) partition, one using Snow Leopard and the other with Lion.
Both still mount correctly on a friends MacBook Pro that is still running Snow Leopard, and I had no problem with the same drives under Lion. Interestingly both can also be connected to Time Capsule USB port and show up correctly.
Both drives mount correctly under Windows 7 on BootCamp partitions that I have on both the 2012 MacBook Air, a 2009 iMac 27. These BootCamp partitions have Paragon HFS+ installed so I can read Mac formated drives.
Both drives show up in Disk Utility, but when attempt to mount the drives I get the message "The disk could not be mounted. Try running First Aid on the disk and retry mounting." I can run Repair in First Aid on the disk and get the message that the volume appears OK, but again have the same problem when I attempt to mount the disk.
I have also tried using Disk Utility 3,2, but still cannot mount the drives, though the program indicates there is no problem with the drives.
I have other portable USB including a Samsung portable USB2 drive, and two external USB3 drives, and I don't have problems with them.
There is clearly a problem with Mountain Lion with accessing (mounting) these Samsung Story USB drives, and the problem appears to be with Mountain Lion itself as the problem did not occur on the same Macs with Lion and does not occur with Bootcamp partitions on the machines.
I have a lot of time searching forums, but I have not found anyone with an identical problem.
I sure hope someone can help or that Apple come up with a fix for this issue which has only developed since the update to Mountain Lion.
You can start here
http://support.seagate.com/kbimg/flash/213059/213059_EN.HTML
Pete

Lumia 625 mtp usb driver will not load

After latest firmware update I can not load or reload this driver. Windows 7 PC will not recognise fhe phone. Usb knows it is a 625, but unable to do anything with explorer or the Windows Phone for desktop

fergiefred20, which app do you use? The Nokia Suite does not support Windows Phone.

HT204095 Apple Mobile Device USB Driver will not install

I've followed the steps to stop and restart Apple Mobile Device Service. I've deleted 3rd party software I thought would conflict. I uninstalled/reinstalled ITunes several times, but it will not recognize my iPod.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
The section Install missing components may help if a particular component will not install when using the main iTunes setup program.
The further information area has direct links to the current and recent builds in case you have problems downloading, need to revert to an older version, or want to try the iTunes for Windows (64-bit - for older video cards) release as a workaround for installation or performance issues, or compatibility with QuickTime or third party software.
Your library should be unaffected by these steps but there are also links to backup and recovery advice should it be needed.
tt2

Just installed 7.2 now usb drives will not mount

Only one slot in the back works. they all worked, front and back, untill I upgraded to 10.7.0 and did the updates to 10.7.2.
I have a Mac Pro, Early 2009, 8Gb ram.

I'd put the blame on Lion changed USB external drive support for some types/makes bridges used.
For some, FW stopped but USB still worked.
Do USB ports work iwth other devices or none at all?
Willing to buy and install PCIe USB card?
run AHT yet?

After updating to iTunes 12 the Apple Mobile Device USB Driver is not listed, I use Windows 8.1, how can i solve this?

After I updates ITunes to the latest version (12), ITunes wont find my iphone and Ipad anymore, after searching I found that the Apple Mobile Device USB Driver is not listed anymore, on the support website of Apple it doesnt explain how to solve this,.
I use Windows 8.1 and so now also ITunes 12, both my Iphone 4S and Ipad Air have the latest IOS version.
I hope anybody can tell me how to solve this that the Apple Mobile Device USB Driver is back, thank you

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

After upgrading to Mountain Lion, my LaCie USB 3 drive will not mount

I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?

mrfredmor_65 wrote:
I just upgraded my OS to 10.8 and now my LaCie P'9230 USB 3.0 external drive will not mount. I have re-installed the USB driver and re-booted the computer and drive several times to no avail; any ideas/help?
It's my understanding that LaCie hasn't released a Mountain Lion driver for their PCIe card yet. Sonnet uses a modified version of the LaCie driver and theirs is dead in the water too for that reason-they also warn that their driver won't work with 10.7.5 when it's released.
Indeed, yesterday I pulled the Sonnet USB 3.0 card from my Mac Pro and replaced it with a CalDigit card from OWC; CalDigit has separate drivers for 10.6, 10.7 and 10.8 and I can say that the card works with all three, the first time in 1.5 years that I've had a reliable USB 3.0 connection.

My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

My USB ports will not recognize any devices, iPhone or external drives. Keyboard and printer work, any suggestions?

I'd start by looking in system profiler.
the blue Apple icon > About this Mac > More info...
goto the hardware section. Scroll down and click on USB
See what happens when you have the device plugged in & not plugged in.
Move keyboard & mouse around to verify that ports work. Plug device in a port that worked with keyboar or mouse. Keyboard usb ports are rather low power.
Perhaps device is taking too much power. Are devices power or unpowered? Try connecting devices to a usb hub.
Which mac do you have?
What iMac do you have?
Report system info
Blue apple > about this Mac
click on more info
click on hardware
do not copy your serial number

My USB Super Drive will not Play Red Box DVDs, Why?

Can anyone explain why my USB super drive will not play RedBox DVDs?

What Mac are you using with the USB SuperDrive?
Is this USB SuperDrive a third party drive or Apple's USB SuperDrive?
If this optical drive is Apple's own external USB SuperDrive, this only works with newer Macs that have no built-in optical drive any longer and WILL NOT work with older Macs that came with built-in optical drives.
Is the Red Box DVD a standard DVD or Blu-Ray DVD disc?

Hp officejet pro 8610e driver will not install in windows 8.1

the Hp drivers will not install from disc or online download.

Hi @aggie62,
Welcome to the HP Forums!
I understand that your HP Officejet pro 8610 driver will not install on Windows 8.1. I am happy to help!
A few questions for starters:
What happens when you try to install the driver?
Do you see any error messages?
How is your printer connected? Wireless, Ethernet, or USB?
Are you able to make copies with your printer?
In the meantime, please try the following:
Uninstall the software. Uninstalling the Printer Software.
Clean boot the computer. How to perform a clean boot in Windows.
Disable any antivirus programs. How to Disable Antivirus in Windows 8?
Disable any firewall programs. Windows Firewall from start to finish.
Create a new user account. Managing User Accounts and Logins (Windows 8).
Re-install using the HP Printer Install Wizard for Windows .
Hope to hear from you soon!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

10.9.1, decrypted G-Drive will not mount

I encrypted a 4tb G-Drive and later decrypted it. Now the drive will not mount. It does appear in disk utility but not in the finder or the desktop. To troubleshoot I rebooted the Mac and the drive (and I powered both completely down), I tried a different usb port (but since it appears in Disk Utility I didn't think doing this would matter). In Disk Utility the drive shows 16mb free (I have less than 1tb data loaded to the drive).

Solved my problem - no help needed - and I feel kinda dumb.
In Disk Utility the drive was greyed out. I simply right clicked on it and there was an option to unlock the drive. I clicked on unlock and was prompted for the drive password - entered password and the drive is now on the desktop and in the finder. Problem solved.

Connected usb driver is not detected in window 8.1

hey .....
HP 250 G3 notebook
connected usb driver is not detected in window 8.1 after update BIOS software ....my current BIOS software version F.22 .... so plsss...fix this problem......

@jeet2113
‎Thank you for using HP Support Forum. I have brought your issue to the appropriate team within HP. They will likely request information from you in order to look up your case details or product serial number. Please look for a private message from an identified HP contact. Additionally, keep in mind not to publicly post ( serial numbers and case details).
If you are unfamiliar with the Forum's private messaging please click here to learn more.
Thank you,
Omar
I Work for HP

TS1538 What do I do after step 6 in "If the Apple Mobile Device USB Driver is not listed"?

i'm very confused about step 5, "Verify that the Apple Mobile Device USB Driver is installed" > "If the Apple Mobile Device USB Driver is not listed", what do I do after step 6? I looked for and found the entry that recognizes the device as a camera, "Apple iPhone, now what? I'm trying to resolve an issue. After an iTunes upgrade in July 2012, I have not been able to get my iTunes to recognize any of my devices. I have uninstalled/reinstalled iTunes, all the steps. Now I'm on this one and I don't know what to do after this step 6. I looked and found the entry.... now what??? I am out of room on my phone because everything I buy on iTunes on the computer mysteriously appears on my iPhone 4, and everything I buy on my iPhone mysteriously uploads onto my iTunes the next time I open it. My phone will charge when connected to the computer, and Windows recognizes it and asks how I want to open pictures, etc. But in iTunes it will not show up under Devices. This is getting beyond ridiculous and I have to get some of this music off of my phone!

Found a possible solution for me.
While the phone was plugged into my computer and iTunes is CLOSED.
1. I went to Services in Windows.
2. I selected Apple Mobile Device and right clicked and selected "Stop".
3. Then I right-clicked again and selected "Start".
4. Then I went to Device Manager and right clicked my iPhone with the yellow alert icon and selected "Uninstall". You will get a warning about uninstalling the device. Click OK.
5. At the top of Device Manager I clicked the Action menu and selected "Scan for Hardware Changes".
This re-installed the iPhone and everything started working again.

Hard drive will not mount shows up in Disk Utility

I have an external drive with a bootable OS X 10.6.8. I was in a transition between building up a SSD swapped drive. The SSD is installed in the CPU box but I have my old installation running from an external.
I have several external hard drives. They are all Firewire. Some have USB 3.0 and or eSATA options but my MacMini only talks to Firewire and USB 2.0.
I understand that you daisy chain Firewire drives and turn them on and off in sequence as they fall from the CPU box/case.
Firewire is a power source. I run the external with the OS using an AC adapter but one Firewire drive is powered through Firewire.
I have had as many as 4 external drives running along with the internal drive without a glitch while I was reorganizing files.
Today I booted off the external drive. It was running fine. I turned on one Firewire drive (the one that runs on Firewire power). That drive stumbled. I recognized the sound when there is an interruption in power. This cause the external boot drive to stall. I had to force a reboot.
Now the external boot drive will not boot up. It does not mount but Disk Utility sees it. The drive itself is bright and clear in Disk Utility but the partition (single) is faded out. I can run Verify and repair in DU. DU says it doesn't see anything to repair. It will not mount on its own or when I click the Mount button in DU. It does not produce an icon on the Desktop (because it is not mounting).
I also have SpeedTools. But although it sees the drive I cannot do anything with it. None of its tools run more than a spli second before they fail.
This drive has USB 3.0 and I see everything through USB that I see through Firewire. Connecting the other way did not get around the problem.
Of course I will buy an AC adapter for every external drive and never run them using Firewire again but the horse is out of the barn.
I have the original installation disks and could run the Archive and Install option but it would require physically swapping drives with the internal. I'd like to avoid it if possible. It is a MacMini and tedious.
Any suggestions?

I took the problematic hard drive and installed it in my Mac Mini so I could attempt a Safe Boot and then Archive and Install if necessary.
Safe Mode didn't work. The drive produced the circle with a slash symbol.
I reset the PRAM which was part of a list of steps to work through I found created by Apple Support.
I was able to boot up to Verbose Mode and view the text of the boot process. I wrote it all down. I can answer questions about the content better than typing it all out exactly. It includes, "...journal magic is bad..." "...failed to open..." and ends with "...cannot mount root, errno = 19"
I attempted Archive and Install however when it went to show what target drives were available it was a blank box and all buttons were grayed out.
I rebooted and opened Disk Utility from the DVD. The drive appeared the same with the top main line bright and the partitioned volume faded. Still was unable to mount. I ran Verify and this time a red line of text appeared "Invalid content in Journal" and at the end I ran Repair. When running I could read line by line and at one point it showed "checking volume information" then the following line "Repairing volume" the following line "Rechecking volume" more line of checking then it ended with "The volume was repaired successfully."
It still would not mount. I ran Verify again and again said "Invalid content in Journal" and this time it stopped midway saying "The volume was found corrupt and needs to be repaired. Error: This disk needs to be repaired. Click Repair Disk."
I clicked Repair and it ended with The vol. was repaired successfully."
Still unable to mount I began repeating Repair over and over. Each time it found something to repair and ended with a success message. After several more Repairs I tried Verify and it stopped midway saying to Repair the disk.
Question: Does running Repair multiple times continue to correct bits and pieces little by little or is this a generic message and we should treat it as a problem Disk Utility cannot pinpoint and is just beating its head against the wall?
The step by step instructions I downloaded mentioned running Repair more than once but it did not say that running it 20 times would erode some problems and eventually lead to a fully repaired disk (if the problem was something DU could take care of in the first place). At this point I have run Repair about 20 times total with a series of 10 back to back skipping Verify. I keep seeing the lines about invalid content in a journal and that it repaired something successfully. Yet I still cannot mount the disk.

[SOLVED] My usb drives will not automount

Similar Messages

Maybe you are looking for