[solved] my usb flash and my camera can't be mounted.

hello, i have a problem i actually solved once with my optical drive which didn't work either, but how do i fix this? should i use fstab again? which directories should i create in /media for this to work?
thanks in advance for your help.
Last edited by 1lj4z1 (2011-04-01 18:55:17)

I'm improved the messaging from my udsks script, so you'll know now why an unmount fails.
Also, I've dropped notify-send in favour of zenity, though you can easily change it to use another notification program like dzen2 (which I prefer). This last change came about to avoid the problems caused by the implementation of Gnome3 and GTK3.

Similar Messages

  • I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working

    I have hp laptop dv9009us one day all the USB ports and webcam camera stopped working, I had windows XP and tried all solutions posted on online forums didn’t work, I upgraded to windows 7 and still not working, please note that the USB is detected in device manger and it says working properly but he webcam is not detected at all, also when I connect any device to USB it gives it power and I even can charge my cell phone but it doesn’t detect any device. Is there any genius out there that can help me?
    Also after I installed windows 7 I went o system information----software environment--- system drivers, and I found all USB drivers stopped by the way this was the case in windows XP as well
    usbccgp            Microsoft USB Generic Parent Driver   c:\windows\system32\drivers\usbccgp.sys         Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbcir   eHome Infrared Receiver (USBCIR)    c:\windows\system32\drivers\usbcir.sys Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbehci Microsoft USB 2.0 Enhanced Host Controller Miniport Driver  c:\windows\system32\drivers\usbehci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbfilter            AMD USB Filter Driver           c:\windows\system32\drivers\usbfilter.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbfltr   Razer Copperhead Driver         c:\windows\system32\drivers\copperhd.sys       Kernel Driver   No       Manual            Stopped           OK      Ignore  No       No
    usbhub Microsoft USB Standard Hub Driver    c:\windows\system32\drivers\usbhub.sys           Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbohci Microsoft USB Open Host Controller Miniport Driver  c:\windows\system32\drivers\usbohci.sys          Kernel Driver   No       Manual Stopped           OK      Normal No       No
    usbprint            Microsoft USB PRINTER Class           c:\windows\system32\drivers\usbprint.sys          Kernel Driver   No            Manual Stopped           OK      Normal No       No
    usbstor USB Mass Storage Driver        c:\windows\system32\drivers\usbstor.sys           Kernel Driver   No       Manual            Stopped           OK      Normal No       No
    usbuhci Microsoft USB Universal Host Controller Miniport Driver         c:\windows\system32\drivers\usbuhci.sys            Kernel Driver   No       Manual Stopped           OK      Normal No       No
    uwbusb            UWB Bus Control USB-Miniport Driver          c:\windows\system32\drivers\usbuwbmini.sys    Kernel Driver   No       Manual Stopped           OK      Normal No       No

    Did you ever get this resolved? I am having the same problem and have tried just about everything for my dv9000.

  • Issue with usb flash and removable hard drives in Lion. (also an install tip)

    Having an issue with my usb flash and removable hard drives.  I plug them in and Lion does not display all my files/folders, I take it out and plug it into my snow leopard machine and all the files/folders are there, does anyone have this issue?
    It does it on my macbook pro which was a snow leopard upgrade to Lion and it does it on my macbook which was a clean install of Lion via a bootable flash drive.
    The computers both work great in all other aspects, so there were no errors on installation. It's plain and simple, some files/folders are not showing up that are present on the drives and viewable on all other non-lion OS's mac and PC.
    Also a word on installs, I highly suggest doing a clean install (delete and reformat drive them install Lion vs a snow leopard ugrade) my machine that was a clean install (macbook) runs 50% faster and smoother than the upgraded one (macbook pro).

    Yes, you can use your backup disk drives in the manner you describe, but Apple provides conflicting information on the subject.
    From Mac Basics: Time Machine
    Time Machine can’t backup to an external drive that's connected to an AirPort Extreme, Time Capsule, or a drive formatted for Microsoft Windows ...
    From Time Machine doesn't back up to AirPort Extreme AirPort Disks
    Time Machine in Mac OS X v10.5 or later can be used to back up to many kinds of Mac OS Extended-formatted drives, but you cannot choose an AirPort Extreme 802.11n's AirPort Disk as a Time Machine backup volume.
    However, you can choose Time Capsule AirPort Disks or internal disks as a Time Machine backup volume.
    They have yet to resolve this discrepancy.
    All other available technical details regarding Time Machine's use seem to indicate that a USB HD connected to Time Capsule should meet Time Machine's requirements. For what it's worth I have been using an external HDD connected to the Time Capsule's USB port and it seems to function just fine.

  • I have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this

    i have a targus 4.0 bluetooth usb adapter and so i can pair my iphone 4s and ipad air wirelessly, it seems to pair ok but when i try to connect i get a error message or not compatible. can some one tell me if it i can use this bluetooth with my devices, thanks

    sos1der wrote:
    pairing the apple equipment is not a big deal just wanted to add songs from itunes wirelessly.
    You can only add songs to your iOS device from iTunes via Wi-Fi sync or via your cable, not Bluetooth.
    sos1der wrote:
    but i tried paring my LG bluetooth so i can listen to music on my computer wirelessly buy it gives me the same error message
    That's an entirely different issue, unrelated to your iOS devices.

  • Hi. I transferred an iMovie file to a USB flash drive. How can i retrieve the file back to iMovie? I am unable to do it

    Hi. I transferred an iMovie file to a USB flash drive. How can i retrieve the file back to iMovie? I am unable to do it

    Hello there,
    It sounds like you have a video file you exported from iMovie that you would like to import back into the program. Depending on the version of iMovie the process is a bit different so choose the correct article for your version:
    iMovie '11: Import video from movie files
    http://support.apple.com/kb/ph2153
    Or
    iMovie (2013): Import media on your computer
    http://support.apple.com/kb/PH14676
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Usb flash and truecrypt [Solved]

    I'm running kernel 2.6.19. Yesterday installed truecrypt and encrypted my usb flash.
    ]$ truecrypt --properties /dev/sda1
    Enter keyfile path [none]:
    Enter password for '/dev/sda1':
    Volume properties:
    Location: /dev/sda1
    Size: 1001111040 bytes
    Type: Normal
    Encryption algorithm: AES-Twofish
    Key size: 512 bits
    Block size: 128 bits
    Mode of operation: LRW
    PKCS-5 PRF: HMAC-RIPEMD-160
    PKCS-5 iteration count: 2000
    Volume created: Tue Apr 10 20:34:56 2007
    Header modified: Tue Apr 10 20:34:56 2007
    However when I try to mount it I get:
    $ truecrypt /dev/sda1 /media/usbf
    Enter password for '/dev/sda1':
    FATAL: Module truecrypt not found.
    truecrypt: Failed to load TrueCrypt kernel module
    then I try as root:
    # modprobe truecrypt
    FATAL: Module truecrypt not found.
    I checked other threads but none of the solutions solved my problem.
    Last edited by Alexo (2007-04-24 15:24:15)

    $ sudo pacman -Sy kernel26
    checking package integrity... done.
    loading package data... done.
    checking for file conflicts...
    error: the following file conflicts were found:
    kernel26: /lib/modules/2.6.20-ARCH/modules.alias: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.ccwmap: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.dep: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.ieee1394map: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.inputmap: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.isapnpmap: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.ofmap: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.pcimap: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.seriomap: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.symbols: exists in filesystem
    kernel26: /lib/modules/2.6.20-ARCH/modules.usbmap: exists in filesystem
    Question: shall I
    $ sudo pacman -U kernel26
    or
    $ sudo pacman -Sf kernel26

  • I need more space to make my windows 7 partition. Can I make that partition on a USB flash drive so I can use it when I want and still have my full ssd when I don't? Do you guys know of any ways to do this?

    I am considering buying a 128 gb MacBook air and I will need to make a windows partition. I would like to be able to use all of my ssd do I was wondering if I could put my windows partition on a small USB flash drive to use when I want to. Do you know if any programs or techniques capable of this?

    Csound1 What Ive been trying to explain is that I have been running bootcamp, I open the app where the first screen is the introduction, i hit continue, the first time I select "download the latest windows support software fromm Apple" then I return and instead select "Install Windows 7." Then hit continue. The third screen is where I "Create a Partition for Windows" I set Windows to 80 gigs then hit INSTALL. As stated before Bootcamp cannot find the install drivers saying "The installer disc could not be found." My windows software is on a USB drive not a disc, I tried using a virtual disc reader to make it appear that the windows software was running on a disc, still no luck. What I would like to know is how to install windows on bootcamp.

  • I made an extra backup on a USB device and now I can't get it back because "the device uses too much power". Why didn't it a few weeks ago and how can I use the device anyway?

    because "it uses too much power"
    I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
    Question 1: How do I solve the problem? (Without going back to Snow Leopard)
    Q2: Why this parential supervision by Apple?

    riks1105 wrote:
    because "it uses too much power"
    I did'nt get that message a few weeks ago when I used Snow Leopard and now I can't approach the files I saved on the external disk.
    Question 1: How do I solve the problem? (Without going back to Snow Leopard)
    Q2: Why this parential supervision by Apple?
    Get a powered hub
    USB is cranky, you're not the first (probably not the last) to have this happen.

  • Slatebook x2 - USB flash and SD card at the same time

    Hello, after almost two years of using this device I had a situation when I wanted to connect USB flash drive and a SD card at the same time (I wanted to copy files from SD to the USB flash drive). I connected the SD card (standard size) to the keyboard module. It was mounted OK. Then I connected the USB flash drive to the keyboard module. This was not mounted at all (no error message). When I dismounted the SD from storage menu then the USB flash drive was mounted automatically. I tried various orders of connecting the devices. I managed to get them work at the same time but then suddenly the USB drive was dismounted. I did not try to perform factory reset (please do not ask this for every issue, I have quite apps, files and settings on the device). It does not matter if the Slatebook is connected to power source. The Slatebook software is fully updated.note: The USB flash drive and the SD card works without any problem when only one of them is connected. Does anyone use SD card and USB flash drive at the same drive? Does it work for you?

    Audio Hijack Pro <http://www.rogueamoeba.com/audiohijackpro/> lets you take the audio output from any application and add multiple effects. Using the "Auxiliary Device Output" effect will send the audio to more than one device.

  • IMovie and Sony camera can connect, but nothing imports

    My iMovie and Sony HD camera can connect fine...I can control my camera from imovie, but when i click import, it plays (plays on camera and timer on imovie starts) but the screen remains blue and no video is actually imported.

    Did you try Sue's excellent suggestion of the Garage band trick anyway?
    Also, try deleting iMovie's preference file...the plist found in YourUserName->Library->preferences->com.apple.iMovieplist. Close iMovie, trash the plist. iMovie will create another one when you launch iMovie again.
    Do you have the camcorder plugged directly into your computer's Firewire port? Some camcorders don't work properly if they are connected into another device. And, just to be sure, you do have the camcorder set to VTR, right?

  • Why can't use adobe flash and witch app can I use to see movies on my ipad2 that requires adobe flash

    Why I can't install adobe flash player when I want to see a movie that requires adobe flash player and what app can I download that does the same that adobe flash player

    madelinefrommoca wrote:
    Why I can't install adobe flash player when I want to see a movie that requires adobe flash player and what app can I download that does the same that adobe flash player
    Because there is no such thing as Flash for iPad

  • Prohibitive sign appears when booting Lion from USB flash and DVD

    Hi There
    I created both a bootable DVD and a USB drive from the Lion download. However I just tried booting my macbook from the DVD and got the "prohibitive sign - ie the circle with a line through it" it was the same when trying the USB flash drive as well. any idea's gratefully appreciated ! BTW my Macbook is a intel dual core.
    I'm currently installing Lion on my Macbook pro from the downloaded image OK so don't think the image is damaged.
    rgs
    Colin

    when you say your MBP is dual core, do you mean core 2duo or core duo?
    http://macs.about.com/od/macoperatingsystems/qt/Mac-Os-X-Lion-Preview-Mac-Os-X-L ion-Minimum-Requirements.htm
    and
    http://www.apple.com/macosx/specs.html

  • I have a turntable with USB output and SoundStudio3 software; can't get any input. Can you help??

    I have a turntable with a USB output and SOUNDSTUDIO3 software. I cannot"find" any audio to record. Can someone help "Denny-Dumb-Butt" see what he is doing wrong??  THANKS!!!

    Did you also check if your USB device shows up in System Preferences > Sound?
    I have an iMic USB "dongle" and need to select it if I want to record from an external source into Sound Studio 3. You need to check both the Input and Output.

  • [SOLVED] Format USB flash stick to UDF

    Hi all.
    I've got new 8GB USB flash stick and decided to format it to UDF. Don't ask why and don't say me, that fat32/ntfs/extX/whatever is better 
    I actually don't need USB stick at all. So formatting it to UDF is just a matter of interest.
    I've installed udftools.
    Then I've tried to make fs as a regular user
    $ mkudffs --media-type=hd --blocksize=512 /dev/sdc
    trying to change type of multiple extents
    $
    After that I've tried the same as root
    # mkudffs --media-type=hd --blocksize=512 /dev/sdc
    start=0, blocks=64, type=RESERVED
    start=64, blocks=12, type=VRS
    start=76, blocks=180, type=USPACE
    start=256, blocks=1, type=ANCHOR
    start=257, blocks=16, type=PVDS
    start=273, blocks=1, type=LVID
    start=274, blocks=15826413, type=PSPACE
    start=15826687, blocks=1, type=ANCHOR
    start=15826688, blocks=239, type=USPACE
    start=15826927, blocks=16, type=RVDS
    start=15826943, blocks=1, type=ANCHOR
    So, I failed to create new fs.
    Could someone help to create one?
    Great thanks in advance
    Last edited by eDio (2011-05-04 20:26:19)

    With unallocated space
    # mkudffs --media-type=hd --blocksize=512 /dev/sdc1
    trying to change type of multiple extents
    # mkudffs --media-type=hd --blocksize=512 /dev/sdc
    start=0, blocks=64, type=RESERVED
    start=64, blocks=12, type=VRS
    start=76, blocks=180, type=USPACE
    start=256, blocks=1, type=ANCHOR
    start=257, blocks=16, type=PVDS
    start=273, blocks=1, type=LVID
    start=274, blocks=15826413, type=PSPACE
    start=15826687, blocks=1, type=ANCHOR
    start=15826688, blocks=239, type=USPACE
    start=15826927, blocks=16, type=RVDS
    start=15826943, blocks=1, type=ANCHOR
    After creating partition
    (parted) print
    Model: USB DISK 2.0 (scsi)
    Disk /dev/sdc: 8103MB
    Sector size (logical/physical): 512B/512B
    Partition Table: msdos
    Number Start End Size Type File system Flags
    1 32,3kB 8102MB 8102MB primary
    # mkudffs --media-type=hd --blocksize=512 /dev/sdc1
    start=0, blocks=64, type=RESERVED
    start=64, blocks=12, type=VRS
    start=76, blocks=180, type=USPACE
    start=256, blocks=1, type=ANCHOR
    start=257, blocks=16, type=PVDS
    start=273, blocks=1, type=LVID
    start=274, blocks=15823431, type=PSPACE
    start=15823705, blocks=1, type=ANCHOR
    start=15823706, blocks=239, type=USPACE
    start=15823945, blocks=16, type=RVDS
    start=15823961, blocks=1, type=ANCHOR
    # mkudffs --media-type=hd --blocksize=512 /dev/sdc
    start=0, blocks=64, type=RESERVED
    start=64, blocks=12, type=VRS
    start=76, blocks=180, type=USPACE
    start=256, blocks=1, type=ANCHOR
    start=257, blocks=16, type=PVDS
    start=273, blocks=1, type=LVID
    start=274, blocks=15826413, type=PSPACE
    start=15826687, blocks=1, type=ANCHOR
    start=15826688, blocks=239, type=USPACE
    start=15826927, blocks=16, type=RVDS
    start=15826943, blocks=1, type=ANCHOR
    Last edited by eDio (2011-04-27 20:02:25)

  • I have and itunes icon and a picture of a usb cable and an arrow can't get it to do anything

    I can't get my 3gs to move off of a screen with an itune icon and a usb cable with an arrow?

    Sure thanks. I was trying to update my iphone and it was connected to my computer. This situation came up while doing this. I restored it a couple of times and it still comes on with the apple logo then immedialtly goes to the iTune + arrow. It will not go anywhere else. I did adjust my computer to allow the update but still nothing on the iphone. Now one more message comes up on my computer that says iphone is still restoring

Maybe you are looking for