[SOLVED] mythtv - No picture using Hauppauge pvr-150
Hi All,
I have just set up mythtv but cannot get a live picture using the Hauppauge pvr 150. The card is working (thanks to enrique) and can both stream video and record video either live or in a cron job. I am attaching the cable directly to the card instead of using a digital cable box. This limits the available channels but thats OK since this connection probably won't be used that often.
I don't recall seeing any options specifying whether the cable connection is analog or digital, nor do I recall seeing any options pertaining to the video card. I don't know what I'm doing wrong so any and all tips will be appreciated.
Thanks
Larry
Last edited by ljshap (2008-05-27 11:02:32)
Problem Solved:
The dodo (Me), kept putting the card in as "analog v4l device" which is how myth set it up.
It should be MPEG-2 encoder card (PVR-x50,500).
I just wasn't being careful enough to check all possibilities.
Seems to be working.
Maybe that will help someone.
Larry
Similar Messages
-
Hauppauge PVR-150 Capture, Audio Static/Noise IVTV Composite input
Hello,
This is my first post.
I have been migrating from Gentoo to Arch after 7-8 years using gentoo, I think Arch is great. even though precompiled packages have there downside. anyway.
I have problem with static/noise audio when capturing from Composite using IVTV, im running kernel 3.0.4 arch kernel.
I have 10 Hauppauge PVR-150 (+1 PVR-500) Cards running, the problem occurs in a random card after reboot.
Video is fine on all cards, but sometimes the audio on either one of the 11 cards get static/noise in the audio background.. sometimes allot, other times just a little bit noise/static.
I tried the wiki, and searched the forum, but can't find a solution, can anyone help me??
I can provide sample (cat /dev/videoX > sample.mpeg) if interested.
See dmesg: http://pastebin.com/U2JnJ0Zr
Thank youHello,
changing to constant bitrate seems to correct the problem,
v4l2-ctl -d /dev/videoX --set-ctrl=video-bitrate-mode=1
and then remember to not have the capture source audio volume to more than 75%. -
[SOLVED] LIRC no input with Hauppauge PVR-350
Hey guys
I have the hardware mentioned in the title in a computer connected with the tv (for xbmc)
I recently have re-setup archlinux on this machine to get a clean systemd setup but now Im really stuck getting my remote working again. Sady I forgot to backup my configuration (theres always something that you forget isnt it)^^
configs
/etc/systemd/system/lircd.service
[Unit]
Description=Linux Infrared Remote Control
[Service]
EnvironmentFile=/etc/conf.d/lircd.conf
ExecStartPre=/usr/bin/ln -sf /run/lirc/lircd /dev/lircd
ExecStart=/usr/sbin/lircd --pidfile=/run/lirc/lircd.pid --device=${LIRC_DEVICE} --driver=${LIRC_DRIVER}
Type=forking
PIDFile=/run/lirc/lircd.pid
[Install]
WantedBy=multi-user.target
/etc/conf.d/lircd.conf
LIRC_DEVICE="/dev/input/event11"
LIRC_DRIVER="devinput"
LIRC_MODULES="ir-kbd-i2c lirc_dev"
LIRC_EXTRAOPTS=""
LIRC_CONFIGFILE="/etc/lirc/lircd.conf
/etc/lirc/lirc.conf
# this config file was automatically generated
# using lirc-0.7.0(any) on Sun Nov 28 20:25:09 2004
# contributed by
# brand: Hauppauge 350
# Created: G.J. Werler (The Netherlands)
# Project: Mythtv Fedora Pundit-R www.mythtvportal.com
# Date: 2004/11/28
# model no. of remote control: Hauppauge A415-HPG
# devices being controlled by this remote: PVR-350
begin remote
name Hauppauge_350
bits 13
flags RC5|CONST_LENGTH
eps 30
aeps 100
one 969 811
zero 969 811
plead 1097
gap 114605
toggle_bit 2
begin codes
Go 0x00000000000017BB
Power 0x00000000000017BD
TV 0x000000000000179C
Videos 0x0000000000001798
Music 0x0000000000001799
Pictures 0x000000000000179A
Guide 0x000000000000179B
Radio 0x000000000000178C
Up 0x0000000000001794
Left 0x0000000000001796
Right 0x0000000000001797
Down 0x0000000000001795
OK 0x00000000000017A5
Back/Exit 0x000000000000179F
Menu/i 0x000000000000178D
Vol+ 0x0000000000001790
Vol- 0x0000000000001791
Prev.Ch 0x0000000000001792
Mute 0x000000000000178F
Ch+ 0x00000000000017A0
Ch- 0x00000000000017A1
Record 0x00000000000017B7
Stop 0x00000000000017B6
Rewind 0x00000000000017B2
Play 0x00000000000017B5
Forward 0x00000000000017B4
Replay/SkipBackward 0x00000000000017A4
Pause 0x00000000000017B0
SkipForward 0x000000000000179E
1 0x0000000000001781
2 0x0000000000001782
3 0x0000000000001783
4 0x0000000000001784
5 0x0000000000001785
6 0x0000000000001786
7 0x0000000000001787
8 0x0000000000001788
9 0x0000000000001789
Asterix 0x000000000000178A
0 0x0000000000001780
# 0x000000000000178E
Red 0x000000000000178B
Green 0x00000000000017AE
Yellow 0x00000000000017B8
Blue 0x00000000000017A9
end codes
end remote
$ sudo systemctl restart lircd.service
$ irw
[I can press what I want, nothing]
$ sudo ir-keytable
Found /sys/class/rc/rc0/ (/dev/input/event11) with:
Driver ir-kbd-i2c, table rc-hauppauge
Supported protocols: RC-5
Enabled protocols: RC-5
Name: i2c IR (Hauppauge WinTV PVR-350
bus: 24, vendor/product: 0000:0000, version: 0x0000
Repeat delay = 500 ms, repeat period = 125 ms
Any help is appreciated!
Last edited by chnuebi (2013-02-12 12:20:01)Hell YEAH!!
/etc/systemd/system/lircd.service
[Unit]
Description=LIRC Daemon
After=network.target
[Service]
Type=forking
EnvironmentFile=/etc/conf.d/lircd.conf
PIDFile=/run/lirc/lircd.pid
ExecStartPre=/bin/mkdir -p /run/lirc
ExecStartPre=/bin/rm -f /dev/lircd
ExecStartPre=/bin/rm -f /run/lirc/lircd
ExecStartPre=/bin/ln -s /run/lirc/lircd /dev/lircd
ExecStart=/usr/sbin/lircd -d $LIRC_DEVICE -P /run/lirc/lircd.pid -H $LIRC_DRIVER $LIRC_CONFIGFILE
ExecStopPost=/bin/rm -f /dev/lircd
ExecStopPost=/bin/rm -fR /run/lirc
[Install]
WantedBy=multi-user.target
In addition it seems i loaded the wrong driver.
/etc/conf.d/lircd.conf
LIRC_DEVICE="/dev/lirc0"
LIRC_DRIVER="default"
#LIRC_MODULES="ir-kbd-i2c lirc_dev"
#LIRC_MODULES="lirc_i2c lirc_dev"
LIRC_EXTRAOPTS=""
LIRC_CONFIGFILE="/etc/lirc/lircd.conf"
/etc/modules-load.d/lirc.conf
#ir-kbd-i2c
lirc_i2c
lirc_dev
so /dev/lirc0 gets created (did it over /dev/input)
Thank you soo much -> moving forward to xbmc mappings (8 -
[Solved] Hauppauge PVR-250 + Lirc = Kernel Oops & Pain
Using:
- Hauppauge PVR-250
--- ivtv
--- lirc_dev
--- lirc_i2c
Modprobe ivtv? Fine.
Modprobe the lirc modules? Fine.
Start lircd service? Fine.
Try to use lirc? FAIL.
This will be my own little self dialog as I get reintroduced to all the pain I use to experience trying to setup MythTV.
lirc_dev: IR Remote Control driver registered, major 61
bttv: driver version 0.9.17 loaded
bttv: using 8 buffers with 2080k (520 pages) each for capture
cx88/0: cx2388x v4l2 driver version 0.0.6 loaded
lirc_i2c: chip found @ 0x18 (Hauppauge IR)
lirc_dev: lirc_register_plugin: sample_rate: 10
BUG: unable to handle kernel paging request at 52492071
IP: [<c01832e6>] do_sys_open+0x76/0xf0
*pde = 00000000
Oops: 0000 [#1] PREEMPT SMP
Modules linked in: cx8800 cx88xx bttv ir_common compat_ioctl32 videobuf_dma_sg videobuf_core btcx_risc lirc_i2c lirc_dev ipv6 usb_storage msp3400 saa7115 tuner tea5767 tda8290 tda18271 tda827x tuner_xc2028 xc5000 tda9887 firewire_ohci tuner_simple mt20xx tea5761 firewire_core crc_itu_t psmouse ivtv pcspkr serio_raw emu10k1_gp i2c_algo_bit cx2341x v4l2_common tveeprom ppp_generic ohci1394 gameport ieee1394 nvidia(P) i2c_i801 intel_agp i2c_core agpgart ehci_hcd shpchp pci_hotplug uhci_hcd sg thermal evdev processor fan button battery ac snd_usb_audio snd_usb_lib snd_intel8x0 snd_emu10k1 snd_rawmidi snd_ac97_codec snd_util_mem snd_hwdep snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd soundcore ac97_bus slhc skge gspca usbcore videodev v4l1_compat rtc_cmos rtc_core rtc_lib reiserfs sr_mod cdrom sd_mod ata_piix ata_generic pata_acpi libata scsi_mod dock
Pid: 3412, comm: lircd Tainted: P (2.6.25-ARCH #1)
EIP: 0060:[<c01832e6>] EFLAGS: 00010287 CPU: 0
EIP is at do_sys_open+0x76/0xf0
EAX: 52492065 EBX: 40000020 ECX: 00000043 EDX: f5d83260
ESI: ffffff9c EDI: f5072000 EBP: 00000007 ESP: f5d99f84
DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068
Process lircd (pid: 3412, ti=f5d98000 task=f543c000 task.ti=f5d98000)
Stack: bfe01a98 00000000 f5d83260 bfe01a98 00000002 bfe0392f f5d98000 c01833dc
bfe01a98 bfe0392f 00000000 00000002 c01050d8 bfe0392f 00000002 bfe01a98
00000000 00000002 bfe01af8 00000005 0000007b 0000007b c0100000 00000005
Call Trace:
[<c01833dc>] sys_open+0x2c/0x40
[<c01050d8>] sysenter_past_esp+0x6d/0xa5
=======================
Code: 78 78 8b 44 24 20 89 d9 89 fa 89 04 24 89 f0 e8 31 ff ff ff 3d 00 f0 ff ff 89 44 24 08 77 6e 8b 54 24 08 bb 20 00 00 40 8b 42 0c <8b> 70 0c 0f b7 56 72 81 e2 00 f0 00 00 81 fa 00 40 00 00 ba 20
EIP: [<c01832e6>] do_sys_open+0x76/0xf0 SS:ESP 0068:f5d99f84
---[ end trace fbdc5cf39936cc8f ]---
Last edited by georgia_tech_swagger (2008-07-29 17:45:56)This is indeed a problem in the lirc 0.8.2 package in extra. I have submitted a bug with a fixed PKGBUILD of lirc 0.8.3.
http://bugs.archlinux.org/task/11041 -
Unable to capture picture using dedicated camera button
Hi
From a couple of weeks i didn't used camera in my mobile.
Today when i used to capture some pics, i am unable to capture the pictures using the dedicated key.
But Same is working in burst mode but not in remaining all modes (Auto mode, manual mode.... )
Please do the needful
With regards
SrinivasSorry,there is only touch capture.I was thinking about volume key that can be used to take a picture.Try to clear data for camera under settings-apps-all.
All we have to decide is what to do with the time that is given to us - J.R.R. Tolkien -
Can someone please provide instructions on how to import an iPhoto library from an old Mac to a new Mac without getting a bunch of duplicates? I tried transferring my pictures using an external hard drive and then copying it to the Pictures folder on my new Mac. I ended up getting a bunch of duplicates. My old Mac has an older version of iPhoto while the new Mac has iPhoto '11. Is that the cause of the problem? Please advise. Thanks.
Simply copy the iPhoto Library from the Pictures Folder on the old Machine to the Pictures Folder on the new Machine.
Then launch iPhoto. That's it.
This moves photos, events, albums, books, keywords, slideshows and everything else.
Regards
TD -
How do I take a picture using my macbook pro?
How do I take a picture using my macbook pro?
What kind of picture? Screen Shot? Command-Shift 3
Using the Camera? Check out Photo Booth. It's in your applications folder. -
Can I use Image Capture to take a picture using a Canon EOS 10D?
Normally I use a card reader to download digital photos, but today I hooked my camera directly to my iMac. I then noticed the "Take Picture" button, so I tried to use it to take a picture with my Canon EOS 10D. Image Capture didn't refuse, it just showed the 'cogwheel' animated cursor and got stuck. What does this mean - is it that this particular camera won't work or that there is something wrong with the setup? I have other digital cameras, but I don't want to work all this out by experiment alone - how can I find out more about how this feature of IC works and what exactly is going on when I press "Take Picture"? There is absolutely no technical info in the Help files.
The Help on Image Capture has the following:
Many cameras let you take a picture using Image Capture when the camera is connected to your computer.
To take a picture:
Connect your camera and open Image Capture.
Click Download Some.
Click Take Picture.
The camera snaps a picture, which then appears in the window.
If you don’t see the Take Picture icon, choose View > Customize Toolbar, and drag the Take Picture icon to the toolbar.
If the Take Picture icon is dimmed, your camera doesn’t support this feature.
As the option is available to you, your camera supports +Tethered Shooting+. If it’s not working check your camera’s manual to see do you need this enabled on your camera.
Regards
TD -
I took a picture using camera plus app. The photo shows up in my camera roll as a thumbnail; however, when I tap to view the photo it comes up as a gray box. I tried downloading, emailing, and copying the picture, but it always saves as a gray box. Can anyone help me?
Hi Giorgiovdb!
Unfortunately I cannot help you; all I did was test for you.
I did an upgrade over my Lion install with Mountain Lion which went fine. I just tested icon view in my Finder on different files and folders and here in my installation all stays fine; good readable like in column view!
The only thing you might try is change your Font in Finder and set it back to the original afterwards!
I quickly Google'd how to change fonts in the Finder as appearantly there's no obvious gui item for it:
http://usermanifest.wordpress.com/2012/07/06/osx-finder-title-bar-font/
Try to see if it brings you anywhere!
At my post all fonts act normal after my upgrade to Mountain Lion; I don't do a clean install unless I really have to!
Goodluck!
Gaytan -
When I print a 4x6 color picture using an iMac with the latest operating system using a Canon MX892 printer, faint black lines appear every 3/16 of an inch. When I print the same picture using iPhoto there is no problem. Any suggestions?
What is the resolution of the picture that you are trying to print?
Go to Image>resize>image size, read the resolution in px/in, then report back, please.
Also, are you in a position to try printing with another printer in an attempt to narrow this down? -
HT5517 How can have full picture using mirrored image from iPad
How can have full picture using mirrored image from iPad on my Apple TV airplay
Welcome to the Apple Community.
Mirroring won't fill the TV screen. The iPad has an aspect ratio of 4:3 and the iPhone 4S or prior an aspect ratio of 3:2, neither of these will fit exactly into a TV screen which as an aspect ratio of 16:9. The Apple TV will not zoom the mirrored image, because it may well cut off information which is situated at the top or bottom of the screen.
You may wish to try each of the settings in ‘Settings > Audio & Video > Adjust for AirPlay overscan’ for the best setting that suits you. -
Everytime I take a picture using my flash, the picture comes out all foggy
Everytime I take a picture using my flash, it comes out foggy!! What can I do to stop this??
The better designers are taking this into account. People should look at the case they are about to purchase. If the case comes within about an 1/8 inch of the flash, it's apt to be a problem.
-
Taking pictures using image capture and Nikon d50
Hi, does any one know if it is possible to take pictures using image capture whilst my nikon d50 is connected to my MacBook so that the image is shown on the MacBook screen.
Yes! Indeed, I have that very same D50 (lovely isn't it?) and I just happenned to have taken already some pictures with it, from the computer.
Once it's pluggeg, go in Applications> Image Capture.
From there, you will either be able to download all the picture from the D50, or take new shots.
You can even share the camera (and it's pictures) online, so someone can even take picture with it (through a webpage). You could even try this yourself, play around in Image Capture and with it's share features, and somewhere it will give you the adress (internal ip adress) so suposely someone from your network (including your own computer) could go, check, and take pictures.
I've tried the web interface from my computer, but couldn't make it work with another one from my LAN. Have to work around this.
But in Image Capture, first make sure the D50 is selected (Devices>[pick it]) and then there is what you are looking for in the upper bar of the window.
Have fun! -
I must purchase a photo editing tool and don't know if I should go with Photoshop or Lightroom. I need to learn how to do basic photo editing on pictures used for a news website. Thoughts? Thanks!
Hi scienceiscool,
You can go ahead with the photography plan as mentioned in the link below:
https://creative.adobe.com/plans/photography?promoid=KLXML
Kindly refer to the link below to get used to the application better:
Photoshop CC tutorials from novice to expert
Regards,
Sheena K -
Is there a way to choose the size of a picture, using iPad 2?
Is there a way to choose the size of a picture, using iPad 2?
Choose picture size using 3rd party apps?
Maybe you are looking for
-
Advance Payment to One Time Vendor
Hi All, I want to make advance payment to One Time Vendor. But system generates massage that :Special G/L for such account is not defined". Awaiting for your reply. Thanx in advance
-
How do i get the music on my iphone to my itunes on my computer?
Hi, recently my computer had crashed. Now, I have all my music on my phone...itunes purchased and not itunes purchased. However, none of my music is on my computer. Someone please help me get my music (all of it) back onto my computer.
-
How can make PIR in period of adjustment not visible in MD04
Dear guru , I have defined a period of adjustment for planned independent requirements. These pir are visible in MD04 but they arenu2019t influent for mrp. I want to make these pir not visible in MD04 I donu2019t want to delete the pir because I wan
-
Officejet 6000 E609n prints on USB. I am unable to get it to run wireless
HP Officejet 6000 E609n Win 7 64 bit My printer works on a USB connection but I have not been able to get it to function on a Wireless to router connection. Router is Linksys WRT160N V3. I have used all the recommended solutions in HP's instructions.
-
I am getting a message on the bottom of my computer task bar that says Firefox is using a large amount of the CPU. I noticed that my computer is running extremely slow and in thunderbird it takes a long time to print attachments. I have another compu