[SOLVED]netctl-auto no longer working

Can some kind person point me in the right direction to fix this? Seems to have stopped working after latest upgrade.  Manually netctl start works OK.  Haven't been able to find the solution in man pages or googling.
[email protected] - Automatic wireless network connection using netctl profiles
Loaded: loaded (/usr/lib/systemd/system/[email protected]; enabled)
Active: failed (Result: exit-code) since Wed 2014-07-09 08:00:20 UTC; 1h 14min ago
Docs: man:netctl.special(7)
Process: 231 ExecStart=/usr/bin/netctl-auto start %I (code=exited, status=1/FAILURE)
Jul 09 08:00:20 arch systemd[1]: Failed to start Automatic wireless network connection using netctl profiles.
Jul 09 08:00:50 arch netctl-auto[231]: Included profile 'wlp16s0-Matviak'
Jul 09 08:00:51 arch netctl-auto[231]: Included profile 'wlp16s0-WIRELESS'
Jul 09 08:00:51 arch netctl-auto[231]: Successfully initialized wpa_supplicant
Jul 09 08:00:51 arch netctl-auto[231]: ctrl_iface exists and seems to be in use - cannot override it
Jul 09 08:00:51 arch netctl-auto[231]: Delete '/run/wpa_supplicant/wlp16s0' manually if it is not used anymore
Jul 09 08:00:51 arch netctl-auto[231]: Failed to initialize control interface '/run/wpa_supplicant'.
Jul 09 08:00:51 arch netctl-auto[231]: You may have another wpa_supplicant process already running or the file was
Jul 09 08:00:51 arch netctl-auto[231]: left by an unclean termination of wpa_supplicant in which case you will need
Jul 09 08:00:51 arch netctl-auto[231]: to manually remove this file before starting wpa_supplicant again.
Last edited by hilltownboy (2014-08-02 12:41:03)

journalctl -b | grep wlp16s0:
ul 29 11:27:17 arch systemd-udevd[148]: renamed network interface wlan0 to wlp16s0
Jul 29 11:27:28 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
Jul 29 11:27:28 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
Jul 29 11:27:19 arch dhcpcd[225]: wlp16s0: adding address fe80::ea40:c74b:8e70:d43a
Jul 29 11:27:23 arch wpa_actiond[317]: Starting wpa_actiond session for interface 'wlp16s0'
Jul 29 11:27:24 arch dhcpcd[230]: wlp16s0: waiting for carrier
Jul 29 11:27:24 arch dhcpcd[230]: wlp16s0: carrier acquired
Jul 29 11:27:25 arch dhcpcd[230]: wlp16s0: IAID e0:20:c5:69
Jul 29 11:27:28 arch dhcpcd[230]: wlp16s0: carrier lost
Jul 29 11:27:25 arch systemd[1]: netctl@wlp16s0\x2dWIRELESS.service: main process exited, code=exited, status=1/FAILURE
Jul 29 11:27:25 arch systemd[1]: Unit netctl@wlp16s0\x2dWIRELESS.service entered failed state.
Jul 29 11:27:28 arch network[222]: Starting network profile 'wlp16s0-WIRELESS'...
Jul 29 11:27:28 arch network[222]: Delete '/run/wpa_supplicant/wlp16s0' manually if it is not used anymore
Jul 29 11:27:28 arch network[222]: The WPA supplicant did not start for interface 'wlp16s0'
Jul 29 11:27:28 arch network[222]: Failed to bring the network up for profile 'wlp16s0-WIRELESS'
Jul 29 11:27:28 arch netctl-auto[223]: Included profile 'wlp16s0-Matviak'
Jul 29 11:27:28 arch netctl-auto[223]: Included profile 'wlp16s0-WIRELESS'
Jul 29 11:27:28 arch dhcpcd[230]: wlp16s0: soliciting a DHCP lease
Jul 29 11:27:28 arch dhcpcd[230]: wlp16s0: if_sendrawpacket: Network is down
Jul 29 11:27:28 arch dhcpcd[230]: wlp16s0: dhcp if_readrawpacket: Network is down
Jul 29 11:31:21 arch dbus[227]: [system] Rejected send message, 2 matched rules; type="method_call", sender=":1.7" (uid=1000 pid=605 comm="systemctl restart netctl-auto@wlp16s0 ") interface="org.freedesktop.systemd1.Manager" member="RestartUnit" error name="(unset)" requested_reply="0" destination="org.freedesktop.systemd1" (uid=0 pid=1 comm="/sbin/init ")
Jul 29 11:31:22 arch dhcpcd[230]: wlp16s0: if_sendrawpacket: Network is down
Jul 29 11:31:22 arch dhcpcd[230]: wlp16s0: dhcp if_readrawpacket: Network is down
Jul 29 11:31:25 arch dhcpcd[230]: wlp16s0: if_sendrawpacket: Network is down
Jul 29 11:31:25 arch dhcpcd[230]: wlp16s0: dhcp if_readrawpacket: Network is down
Jul 29 11:31:29 arch dhcpcd[230]: wlp16s0: if_sendrawpacket: Network is down
Jul 29 11:31:29 arch dhcpcd[230]: wlp16s0: dhcp if_readrawpacket: Network is down
Jul 29 11:31:29 arch sudo[607]: norman : TTY=pts/1 ; PWD=/home/norman ; USER=root ; COMMAND=/usr/bin/systemctl restart netctl-auto@wlp16s0
Jul 29 11:31:29 arch wpa_actiond[317]: Terminating wpa_actiond session for interface 'wlp16s0'
Jul 29 11:31:33 arch dhcpcd[230]: wlp16s0: if_sendrawpacket: Network is down
Jul 29 11:31:33 arch dhcpcd[230]: wlp16s0: dhcp if_readrawpacket: Network is down
Jul 29 11:31:37 arch dhcpcd[230]: wlp16s0: if_sendrawpacket: Network is down
Jul 29 11:31:37 arch dhcpcd[230]: wlp16s0: dhcp if_readrawpacket: Network is down
Jul 29 11:31:41 arch netctl-auto[633]: Included profile 'wlp16s0-Matviak'
Jul 29 11:31:41 arch netctl-auto[633]: Included profile 'wlp16s0-WIRELESS'
Jul 29 11:31:41 arch dhcpcd[230]: wlp16s0: if_sendrawpacket: Network is down
Jul 29 11:31:41 arch dhcpcd[230]: wlp16s0: dhcp if_readrawpacket: Network is down
Jul 29 11:31:41 arch kernel: IPv6: ADDRCONF(NETDEV_UP): wlp16s0: link is not ready
Jul 29 11:31:41 arch wpa_actiond[651]: Starting wpa_actiond session for interface 'wlp16s0'
Jul 29 11:31:43 arch kernel: wlp16s0: authenticate with f8:1a:67:d3:6f:aa
Jul 29 11:31:43 arch kernel: wlp16s0: send auth to f8:1a:67:d3:6f:aa (try 1/3)
Jul 29 11:31:43 arch kernel: wlp16s0: authenticated
Jul 29 11:31:43 arch kernel: wlp16s0: associate with f8:1a:67:d3:6f:aa (try 1/3)
Jul 29 11:31:43 arch kernel: wlp16s0: RX AssocResp from f8:1a:67:d3:6f:aa (capab=0x421 status=0 aid=2)
Jul 29 11:31:43 arch kernel: wlp16s0: associated
Jul 29 11:31:43 arch kernel: IPv6: ADDRCONF(NETDEV_CHANGE): wlp16s0: link becomes ready
Jul 29 11:31:43 arch dhcpcd[230]: wlp16s0: carrier acquired
Jul 29 11:31:43 arch wpa_actiond[651]: Interface 'wlp16s0' connected to network 'WIRELESS'
Jul 29 11:31:43 arch dhcpcd[230]: wlp16s0: adding address fe80::ad30:b256:e3a3:dbd0
Jul 29 11:31:43 arch dhcpcd[230]: wlp16s0: IAID e0:20:c5:69
Jul 29 11:31:43 arch dhcpcd[230]: control command: dhcpcd -4 -q -t 30 -K -L wlp16s0
Jul 29 11:31:43 arch dhcpcd[230]: wlp16s0: soliciting a DHCP lease
Jul 29 11:31:43 arch dhcpcd[230]: wlp16s0: offered 192.168.0.100 from 192.168.0.1
Jul 29 11:31:44 arch dhcpcd[230]: wlp16s0: soliciting an IPv6 router
Jul 29 11:31:48 arch dhcpcd[230]: wlp16s0: leased 192.168.0.100 for 7200 seconds
Jul 29 11:31:48 arch dhcpcd[230]: wlp16s0: adding route to 192.168.0.0/24
Jul 29 11:31:48 arch dhcpcd[230]: wlp16s0: adding default route via 192.168.0.1
Jul 29 11:31:56 arch dhcpcd[230]: wlp16s0: no IPv6 Routers available
Blank line omits dozens of repeated "Network is down", etc.

Similar Messages

  • [SOLVED] netctl-auto not working, and I cannot remove netctl instance

    Hi, I installed Arch a few days ago, netctl-auto was working yesterday but today it's not.
    Note that
    netctl start
    works: I have a problem with netctl-auto only.
    $ ping -c 3 8.8.8.8
    connect: Network in unreachable
    I have created only one netctl profile so far, it's called wlp4s0-VM581389-2G (wlp4s0 is the name of my wireless interface)
    $ ls /etc/netctl
    examples hooks interfaces wlp4s0-VM581389-2G
    $ netctl list
    wlp4s0-VM581389-2G
    wpa_actiond is installed, and I have done
    systemctl enable [email protected]
    But for some reason I have some extra netctl@ instances that shouldn't be there. I am wondering if they could be the cause of netctl-auto not working properly:
    $ systemctl | grep netctl
    [email protected] loaded active running Automatic wireless network connection using netctl profiles
    ● netctl@my\x2dnetwork.service loaded failed failed Networking for netctl profile my-network
    ● netctl@wlp4s0\x2dVM581389\x2d2G.service loaded failed failed Networking for netctl profile wlp4s0-VM581389-2G
    system-netctl.slice loaded active active system-netctl.slice
    system-netctl\x2dauto.slice loaded active active system-netctl\x2dauto.slice
    - What are these bullet points at the beginning of these two lines?
    - Where do netctl@my\x2dnetwork.service and netctl@wlp4s0\x2dVM581389\x2d2G.service come from? They might be instances that I had enabled in the past.
    These instances are not enabled and they are inactive, but they are loaded!
    $ systemctl is-enabled netctl@my\x2dnetwork.service
    Failed to get unit file state for [email protected]: No such file or directory
    $ systemctl status netctl@my\x2dnetwork.service
    ● [email protected] - Networking for netctl profile myx2dnetwork
    Loaded: loaded (/usr/lib/systemd/system/[email protected]; static; vendor preset: disabled)
    Active: inactive (dead)
    Docs: man:netctl.profile(5)
    I have tried to get rid of them, but not managed:
    $ systemctl stop netctl@my\x2dnetwork.service
    $ systemctl disable netctl@my\x2dnetwork.service
    $ systemctl | grep netctl
    [email protected] loaded active running Automatic wireless network connection using netctl profiles
    netctl.service loaded active exited (Re)store the netctl profile state
    ● netctl@my\x2dnetwork.service loaded failed failed Networking for netctl profile my-network
    ● netctl@wlp4s0\x2dVM581389\x2d2G.service loaded failed failed Networking for netctl profile wlp4s0-VM581389-2G
    system-netctl.slice loaded active active system-netctl.slice
    system-netctl\x2dauto.slice loaded active active system-netctl\x2dauto.slice
    [user@mascip-toshiba ~]$ systemctl daemon-reload
    [user@mascip-toshiba ~]$ systemctl | grep netctl
    [email protected] loaded active running Automatic wireless network connection using netctl profiles
    netctl.service loaded active exited (Re)store the netctl profile state
    ● netctl@my\x2dnetwork.service loaded failed failed Networking for netctl profile my-network
    ● netctl@wlp4s0\x2dVM581389\x2d2G.service loaded failed failed Networking for netctl profile wlp4s0-VM581389-2G
    system-netctl.slice loaded active active system-netctl.slice
    system-netctl\x2dauto.slice loaded active active system-netctl\x2dauto.slice
    Also, I have tried to check with
    netctl-auto list
    , which gives an empty output. I am guessing that it's normal, because the netctl-auto instances are managed by systemd?
    Now, trying to understand what is happening to [email protected]: as seen before with systemctl | grep netctl, it is active and running.
    Then I do:
    $ journalctl -u [email protected]
    -- Reboot --
    Feb 10 17:34:23netctl-auto[270]: Included profile: 'wlp4s0-VM581389-2G'
    wpa_actiond[310]: Starting wpa_actiond session for interface 'wlp4s0'
    So, a wpa_actiond session was started, but I still cannot ping 8.8.8.8. Why?
    Investigating further:
    $ netctl status wlp4s0-VM581389-2G
    ● netctl@wlp4s0\x2dVM581389\x2d2G.service - Networking for netctl profile wlp4s0-VM581389-2G
    Loaded: loaded (/usr/lib/systemd/system/[email protected]; static; vendor preset: disabled)
    Active: failed (Result: exit-code) since Tue 2015-02-10 19:43:17 GMT; 3min 16s ago
    Docs: man:netctl.profile(5)
    Process: 274 ExecStart=/usr/lib/network/network start %I (code=exited, status=1/FAILURE)
    Main PID: 274 (code=exited, status=1/FAILURE)
    Feb 10 19:43:15 mascip-toshiba network[274]: Failed to initialize control interface '/run/wpa_supplicant'.
    Feb 10 19:43:15 mascip-toshiba network[274]: You may have another wpa_supplicant process already running or the file was
    Feb 10 19:43:15 mascip-toshiba network[274]: left by an unclean termination of wpa_supplicant in which case you will need
    Feb 10 19:43:15 mascip-toshiba network[274]: to manually remove this file before starting wpa_supplicant again.
    Feb 10 19:43:17 mascip-toshiba network[274]: The WPA supplicant did not start for interface 'wlp4s0'
    Feb 10 19:43:17 mascip-toshiba network[274]: Failed to bring the network up for profile 'wlp4s0-VM581389-2G'
    Feb 10 19:43:17 mascip-toshiba systemd[1]: netctl@wlp4s0\x2dVM581389\x2d2G.service: main process exited, code=exited, status=1/FAILURE
    Feb 10 19:43:17 mascip-toshiba systemd[1]: Failed to start Networking for netctl profile wlp4s0-VM581389-2G.
    Feb 10 19:43:17 mascip-toshiba systemd[1]: Unit netctl@wlp4s0\x2dVM581389\x2d2G.service entered failed state.
    Feb 10 19:43:17 mascip-toshiba systemd[1]: netctl@wlp4s0\x2dVM581389\x2d2G.service failed.
    "You may have another wpa_supplicant process already running or the file was left by an unclean termination of wpa_supplicant in which case you will need to manually remove this file before starting wpa_supplicant again."
    What does this mean? Which file might have been left by an unclean termination? I tried to find this info in the wpa_supplicant documentation, and by searching on Google, but couldn't find anything.
    Now I am lost:
    - how do I get rid of these two undesired netctl instances?
    - where can I investigate next, to get netctl-auto@wlp4s0 to work?
    Any help greatly appreciated :-)
    Last edited by mascip (2015-02-13 11:15:38)

    What is the output of:
    ls -l /etc/systemd/system/multi-user.target.wants
    netctl-auto cannot be used with explicitly enabled profiles (ie, those for which you have used `netctl enable <profile>`).

  • [SOLVED] USB 3G no longer works after upgrade to GNOME 3.8

    I did the 'big' update today, including upgrading to GNOME 3.8. Unfortunately, NetworkManager no longer picks up my 3G USB modem (which used to work fine before the update). Any pointers as to how I could debug this would be greatly appreciated.
    wvdial has never really worked for me, but gnome networkmanager used to pick up my device and the connection, and now simply acts as if it's no longer present. Attempting to follow the instructions on the wiki to re-setup my USB stick (the instructions I followed in the first place) no longer works. Did today's update cause the same problem for anybody else?
    **Update: After updating today to modemmanager 0.7.990-4 and running
    sudo systemctl enable ModemManager
    sudo systemctl start ModemManager
    I have full connectivity again with the built-in DW5550 mobile broadband card in my Dell Precision M6600 (including showing signal strength in the GNOME 3.8 top bar, etc). Thanks all for the help, and (most importantly) to whoever fixed up modemmanager!
    Last edited by dawid.loubser (2013-04-26 16:57:42)

    wvdial might also be a workaround, if one does not like to downgrade. In my case, I had to unset my PIN on the SIM card first. One can do that using a mobile phone, for example.
    Then
    # pacman -S wvdial
    in /etc/wvdial.conf, I put
    [Dialer Defaults]
    Init2 = ATQ0 V1 E1 S0=0 &C1 &D2 +FCLASS=0
    Modem Type = Analog Modem
    ISDN = 0
    Stupid Mode = 1
    Dial Attempts = 3
    Init1 = ATZ
    [Dialer huawei]
    Modem = /dev/serial/by-id/usb-ZTE_Incorporated_1_1_Surf-stick_MF19001MOD010000-if02-port0
    Baud = 115200
    [Dialer voda]
    Init3 = AT+CGDCONT=1,"IP","web.vodafone.de"
    [Dialer dial]
    Phone=*99**1#
    Username = umts
    Password = umts
    You can find out your modem name by looking it up with
    ls /dev/serial/by-id/
    In my case there were names containing the strings if00, if01 and if02, and if02 turned out to be the correct one. This depends on hardware.
    Also, in the "Init 3" line, you may have to replace "web.vodafone.de" according to your provider. The section "dial" seems to be quite universal from what I read on the web, so you may not have to change that.
    then
    # wvdial huawei voda dial
    and hope for the best.
    Disclaimer: I do not have a comprehensive understanding of what I did here, but it worked in my case and it might work for you, too.
    I noticed that the Defaults section makes a difference, because the one I just edited in above avoids some delay in dialing.
    Last edited by tobi-fankhaenel (2013-04-23 08:23:00)

  • [SOLVED] Openbox autostart no longer working since upgrade

    After the upgrade on May 14 2013 my autostart file no longer works. I tried renaming my autostart.sh to just autostart no luck. There is nothing wrong with the autostart file as I can run it manually and it will load all my apps. Also, if I cd to  /usr/lib/openbox/ and run openbox-autostart directly it works. Here are the updated packages:
    [2013-05-14 21:34] [PACMAN] upgraded ethtool (1:3.8-1 -> 1:3.9-1)
    [2013-05-14 21:34] [PACMAN] upgraded firefox (20.0.1-5 -> 21.0-1)
    [2013-05-14 21:34] [PACMAN] upgraded gsettings-desktop-schemas (3.8.0-1 -> 3.8.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded glib-networking (2.36.1-1 -> 2.36.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.0.1-2 -> 3.8.2.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded gnome-icon-theme (3.8.0-1 -> 3.8.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded gnupg (2.0.19-7 -> 2.0.20-1)
    [2013-05-14 21:34] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
    [2013-05-14 21:34] [PACMAN] upgraded gvfs (1.16.1-2 -> 1.16.2-1)
    [2013-05-14 21:34] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
    [2013-05-14 21:34] [PACMAN] upgraded mplayer (35920-2 -> 35920-3)
    [2013-05-14 21:34] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
    [2013-05-14 21:34] [PACMAN] upgraded pango (1.34.0-1 -> 1.34.1-1)
    [2013-05-14 21:34] [PACMAN] upgraded pdnsd (1.2.9.a-1 -> 1.2.9.a-2)
    [2013-05-14 21:34] [PACMAN] upgraded python2-distribute (0.6.38-1 -> 0.6.39-1)
    [2013-05-14 21:34] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
    [2013-05-14 21:34] [PACMAN] upgraded sudo (1.8.6.p8-1 -> 1.8.6.p8-2)
    [2013-05-14 21:34] [PACMAN] upgraded thunderbird (17.0.5-2 -> 17.0.6-1)
    [2013-05-14 21:34] [PACMAN] upgraded virtualbox (4.2.12-2 -> 4.2.12-3)
    [2013-05-14 21:34] [PACMAN] upgraded vte-common (0.34.4-1 -> 0.34.5-1)
    [2013-05-14 21:35] [PACMAN] upgraded python3-threaded_servers (2013.5.12.3-1 -> 2013.5.14.1-1)
    Not sure what's going on or what could have caused it. My .xinitrc looks like this:
    #!/bin/sh
    if [ -d /etc/X11/xinit/xinitrc.d ]; then
    for f in /etc/X11/xinit/xinitrc.d/*; do
    [ -x "$f" ] && . "$f"
    done
    unset f
    fi
    export BROWSER="chromium"
    # Start GNOME Keyring
    eval $(/usr/bin/gnome-keyring-daemon --start --components=gpg,pkcs11,secrets,ssh)
    # You probably need to do this too:
    export SSH_AUTH_SOCK
    export GPG_AGENT_INFO
    export GNOME_KEYRING_CONTROL
    export GNOME_KEYRING_PID
    exec openbox-session
    My .zprofile
    [[ -z $DISPLAY && $XDG_VTNR -eq 1 ]] && startx &> ~/.xlog
    My systemd startup service:
    # This file is part of systemd.
    # systemd is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2.1 of the License, or
    # (at your option) any later version.
    [Unit]
    Description=Getty on %I
    Documentation=man:agetty(8) man:systemd-getty-generator(8)
    Documentation=http://0pointer.de/blog/projects/serial-console.html
    After=systemd-user-sessions.service plymouth-quit-wait.service
    After=rc-local.service
    # If additional gettys are spawned during boot then we should make
    # sure that this is synchronized before getty.target, even though
    # getty.target didn't actually pull it in.
    Before=getty.target
    IgnoreOnIsolate=yes
    # On systems without virtual consoles, don't start any getty. (Note
    # that serial gettys are covered by [email protected], not this
    # unit
    ConditionPathExists=/dev/tty0
    [Service]
    # the VT is cleared by TTYVTDisallocate
    ExecStart=-/sbin/agetty -a dodo3773 %I 38400
    Type=simple
    #Restart=always
    #RestartSec=0
    UtmpIdentifier=%I
    TTYPath=/dev/%I
    TTYReset=no
    TTYVHangup=no
    TTYVTDisallocate=no
    KillMode=process
    IgnoreSIGPIPE=no
    # Unset locale for the console getty since the console has problems
    # displaying some internationalized messages.
    Environment=LANG= LANGUAGE= LC_CTYPE= LC_NUMERIC= LC_TIME= LC_COLLATE= LC_MONETARY= LC_MESSAGES= LC_PAPER= LC_NAME= LC_ADDRESS= LC_TELEPHONE= LC_MEASUREMENT= LC_IDENTIFICATION=
    # Some login implementations ignore SIGTERM, so we send SIGHUP
    # instead, to ensure that login terminates cleanly.
    KillSignal=SIGHUP
    [Install]
    WantedBy=getty.target
    Edit: I tried switching to bash in a tty and then just startx but that doesn't help either.
    Edit2: To be clear openbox does load a desktop. The autostart scripts at ~/.config/openbox/ just don't run. Thanks.
    Edit3: I decided to run the command issued in openbox-session and added --debug to it. Here is the output of "xinit /usr/bin/openbox --debug --startup "/usr/lib/openbox/openbox-autostart OPENBOX" "$@" -- :1 -nolisten tcp" :
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.8.7-1-ARCH x86_64
    Current Operating System: Linux dodo713 3.9.2-2-ck #1 SMP PREEMPT Sun May 12 18:19:49 EDT 2013 x86_64
    Kernel command line: BOOT_IMAGE=/vmlinuz-linux-ck root=UUID=06874255-7a5d-4968-8f09-1e53cb761f44 ro quiet init=/usr/lib/systemd/systemd
    Build Date: 17 April 2013 02:37:06PM
    Current version of pixman: 0.30.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.1.log", Time: Fri May 17 08:14:11 2013
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    setversion 1.4 failed
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    Initializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    Loading extension NV-GLX
    Loading extension NV-CONTROL
    Loading extension XINERAMA
    setversion 1.4 failed
    Openbox-Debug: --startup /usr/lib/openbox/openbox-autostart OPENBOX
    Openbox-Debug: Moving to desktop 1
    Openbox-Debug: not managing override redirect window 0x4000bb
    which: no hsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
    which: no esetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
    which: no xsetroot in (/usr/local/bin:/usr/bin:/bin:/usr/local/sbin:/usr/sbin:/sbin:/opt/android-sdk/platform-tools:/usr/bin/core_perl:/home/dodo3773/Documents/Scripts:/home/dodo3773/Documents/Scripts)
    kupfer: Reading from stdin
    The XKEYBOARD keymap compiler (xkbcomp) reports:
    > Warning: Compat map for group 2 redefined
    > Using new definition
    > Warning: Compat map for group 3 redefined
    > Using new definition
    > Warning: Compat map for group 4 redefined
    > Using new definition
    Errors from xkbcomp are not fatal to the X server
    Openbox-Debug: Caught signal 22. Ignoring.
    Openbox-Debug: UPDATE DESKTOP NAMES
    Openbox-Debug: Keyboard map changed. Reloading keyboard bindings.
    Edit4: Removed everything from /etc/xdg/autostart and ~/.config/autostart/ directories. That didn't work.
    Edit5: Tried installing xorg-xsetroot to let openbox set the color of the wallpaper. That didn't work.
    Edit6: Checked the output of "loginctl show-session $XDG_SESSION_ID" to make sure that wasn't the issue. Looks okay to me:
    Id=1
    Timestamp=Fri 2013-05-17 10:25:53 PDT
    TimestampMonotonic=13650783
    DefaultControlGroup=systemd:/user/1000.user/1.session
    VTNr=1
    TTY=tty1
    Remote=no
    Service=login
    Leader=405
    Audit=1
    Type=tty
    Class=user
    Active=yes
    State=active
    KillProcesses=no
    IdleHint=no
    IdleSinceHint=1368811547544203
    IdleSinceHintMonotonic=7545641
    Name=dodo3773
    Edit7: Tried installing xorg-xrdb thinking maybe that would help and did todays updates. No luck yet.
    Edit8: Kupfer still loads even though nothing else does. So I uninstalled kupfer. Same thing though. No autostart.
    Edit9: Tried booting into repo kernel instead of ck kernel. Didn't work.
    Last edited by dodo3773 (2013-05-19 06:34:44)

    WonderWoofy wrote:Interestingly, of all those things you included in your post, you forgot to include the autostart script itself.  What does that look like?
    Well, since it worked fine even when called indirectly through openbox-autostart and since it's worked fine for months I figured it was fine. I am happy to post it though. Here you go:
    feh --bg-scale /home/dodo3773/Pictures/blacksolid.png &
    xfce4-panel &
    numlockx &
    keepassx -lock &
    kupfer --no-splash &
    ~/Documents/Scripts/startupopen.sh &
    sleep 30 && sudo /usr/bin/ntpd -qg &
    sudo /usr/sbin/ethtool -K eth0 rx off &
    ~/Documents/Scripts/conky.sh &
    sudo /home/dodo3773/Documents/Scripts/temp_throttlenew > /dev/null 2>&1 &
    Here are the external scripts that are called (startupopen.sh and temp_throttlenew):
    startupopen.sh
    #! /bin/bash
    sleep 13
    chromium &
    thunderbird &
    sleep 20
    devilspie -a &
    sleep 7
    pkill devilspie &
    exit
    temp_throttlenew
    #!/bin/bash
    # temp_throttle.sh max_temp
    # USE CELSIUS TEMPERATURES.
    if [[ $EUID -ne 0 ]]; then
    echo "This script must be run as root" 1>&2
    exit 1
    fi
    #if [ $# -ne 1 ]; then
    # If temperature wasn't given, then print a message and exit.
    # echo "Please supply a maximum desired temperature in Celsius." 1>&2
    # echo "For example: ${0} 60" 1>&2
    # exit 2
    #else
    #Set the first argument as the maximum desired temperature.
    MAX_TEMP=85
    #fi
    # The frequency will increase when low temperature is reached.
    let LOW_TEMP=$MAX_TEMP-5
    CORES=$(nproc) # Get number of CPU cores.
    echo -e "Number of CPU cores detected: $CORES\n"
    # Temperatures internally are calculated to the thousandth.
    MAX_TEMP=${MAX_TEMP}000
    LOW_TEMP=${LOW_TEMP}000
    # FREQ_LIST is a list (array) of all available cpu frequencies the system allows.
    declare -a FREQ_LIST=($(cat /sys/devices/system/cpu/cpu0/cpufreq/scaling_available_frequencies))
    # CURRENT_FREQ relates to the FREQ_LIST by keeping record of the currently set frequency.
    let CURRENT_FREQ=1
    function set_freq {
    echo ${FREQ_LIST[$1]}
    cpupower frequency-set -g "ondemand" -d "800MHz" -u ${FREQ_LIST[$1]}
    function throttle {
    if [ $CURRENT_FREQ -ne $((${#FREQ_LIST[@]}-1)) ]; then
    let CURRENT_FREQ+=1
    echo -n "throttle "
    set_freq $CURRENT_FREQ
    fi
    function unthrottle {
    if [ $CURRENT_FREQ -ne 0 ]; then
    let CURRENT_FREQ-=1
    echo -n "unthrottle "
    set_freq $CURRENT_FREQ
    fi
    function get_temp {
    # Get the system temperature.
    # If one of these doesn't work, the try uncommenting another.
    TEMP=$(cat /sys/class/thermal/thermal_zone0/temp)
    #TEMP=$(cat /sys/class/hwmon/hwmon0/temp1_input)
    #TEMP=$(cat /sys/class/hwmon/hwmon1/device/temp1_input)
    while true; do
    get_temp
    if [ $TEMP -gt $MAX_TEMP ]; then # Throttle if too hot.
    throttle
    elif [ $TEMP -le $LOW_TEMP ]; then # Unthrottle if cool.
    unthrottle
    fi
    sleep 3
    done
    Stuff that needs sudo is in my sudoers as "username hostname NOPASSWD: item1,item2,etc,etc". Nothing too exciting. Seems like if there was suddenly something wrong with my autostart file at least some of the stuff would run either way though cause of "&". Pretty puzzling this issue is.

  • [SOLVED] VAIO brightness no longer working after upgrade

    Hi I used to set brightness on my VAIO VPCCAS1E, via...
    xfce4 -> fn keys
    i3 -> "echo 5 | sudo tee /sys/class/backlight/acpi_video0/brightness"
    none of them are working after having upgraded the system yesterday. I have checked the news and done my -Syu accordingly.
    Upgrade log:
    [2013-06-05 09:49] [PACMAN] Running 'pacman -Syu'
    [2013-06-05 09:49] [PACMAN] synchronizing package lists
    [2013-06-05 09:50] [PACMAN] starting full system upgrade
    [2013-06-05 10:29] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.VTY/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
    [2013-06-05 10:31] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
    [2013-06-05 10:31] [ALPM-SCRIPTLET]
    [2013-06-05 10:31] [ALPM-SCRIPTLET] Restarting cups
    [2013-06-05 10:31] [ALPM-SCRIPTLET]
    [2013-06-05 10:31] [ALPM-SCRIPTLET]
    [2013-06-05 10:31] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 10:31] [ALPM-SCRIPTLET] - -
    [2013-06-05 10:31] [ALPM-SCRIPTLET] -Remember to check for foomatic-db-foo2zjs updates as well-
    [2013-06-05 10:31] [ALPM-SCRIPTLET] - -
    [2013-06-05 10:31] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 10:31] [ALPM-SCRIPTLET]
    [2013-06-05 10:31] [PACMAN] upgraded foo2zjs (20130302-3 -> 20130530-3)
    [2013-06-05 10:34] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.JSV/plymouth-0.8.8-10-x86_64.pkg.tar.xz'
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] ==================================================================================
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 1. To make Plymouth work:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 1.1. Add "plymouth" to HOOKS after "base" and "udev" in /etc/mkinitcpio.conf
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 1.2. Add 'quiet splash' to the grub command line
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 1.3. Rebuild your initrd image (# mkinitcpio -p [kernel preset name]).
    [2013-06-05 10:34] [ALPM-SCRIPTLET] E.g.: sudo mkinitcpio -p linux
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 2. To enable encryption, replace "encrypt" with "plymouth-encrypt" in
    [2013-06-05 10:34] [ALPM-SCRIPTLET] mkinitcpio.conf and rebuild your initrd image.
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 3. You will also need to rebuild your initrd image every time you change your theme
    [2013-06-05 10:34] [ALPM-SCRIPTLET] (the default is set as 'spinfinity').
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] To list all plymouth themes:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] plymouth-set-default-theme -l
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] To change theme:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] # plymouth-set-default-theme <theme>
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] To rebuild initrd image:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] # mkinitcpio -p linux
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 4. For Smooth Transition to Display Manager you have to:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 4.1. See the Wiki Page (link in 5) to prepare your Display Manager
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 4.2. Disable your Display Manager Unit
    [2013-06-05 10:34] [ALPM-SCRIPTLET] E.g. : systemctl disable kdm.service
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 4.3. Enable the respective DM-plymouth Unit (GDM,KDM,Lightdm,LXDM units provided)
    [2013-06-05 10:34] [ALPM-SCRIPTLET] E.g. : systemctl enable kdm-plymouth.service
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] 5. For more information please visit the Wiki page:
    [2013-06-05 10:34] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Plymouth
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [ALPM-SCRIPTLET] OBS. If you have any leftover "kill Plymouth" lines in /etc/rc.local or ~/.xinitrc
    [2013-06-05 10:34] [ALPM-SCRIPTLET] they are no longer required.
    [2013-06-05 10:34] [ALPM-SCRIPTLET] ==================================================================================
    [2013-06-05 10:34] [ALPM-SCRIPTLET]
    [2013-06-05 10:34] [PACMAN] upgraded plymouth (0.8.8-5 -> 0.8.8-10)
    [2013-06-05 10:36] [PACMAN] Running 'pacman -U tmp/plymouth.tar.gz'
    [2013-06-05 10:36] [PACMAN] Running 'pacman -U plymouth.tar.gz'
    [2013-06-05 10:37] [PACMAN] Running 'pacman -S catalyst-utils'
    [2013-06-05 10:40] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.eGs/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 10:40] [PACMAN] Running 'pacman -S catalyst-dkms lib32-catalyst-utils'
    [2013-06-05 10:41] [PACMAN] Running 'pacman -S catalyst'
    [2013-06-05 10:44] [PACMAN] Running 'pacman --color auto -Sy'
    [2013-06-05 10:44] [PACMAN] synchronizing package lists
    [2013-06-05 10:47] [PACMAN] Running 'pacman -S catalyst catalyst-utils'
    [2013-06-05 10:47] [PACMAN] Running 'pacman -Syu'
    [2013-06-05 10:47] [PACMAN] synchronizing package lists
    [2013-06-05 10:52] [PACMAN] Running 'pacman --color auto -Sy'
    [2013-06-05 10:52] [PACMAN] synchronizing package lists
    [2013-06-05 10:53] [PACMAN] Running 'pacman -Syu'
    [2013-06-05 10:53] [PACMAN] synchronizing package lists
    [2013-06-05 10:53] [PACMAN] Running 'pacman --color auto -Sy'
    [2013-06-05 10:53] [PACMAN] synchronizing package lists
    [2013-06-05 10:55] [PACMAN] Running 'pacman --color auto -Sy'
    [2013-06-05 10:55] [PACMAN] synchronizing package lists
    [2013-06-05 10:58] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.9k2/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:02] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.FaM/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 11:03] [PACMAN] Running 'pacman --color auto -S --asdeps --needed multilib/lib32-libdrm'
    [2013-06-05 11:03] [PACMAN] installed lib32-libpciaccess (0.13.1-1)
    [2013-06-05 11:03] [PACMAN] installed lib32-libdrm (2.4.45-1)
    [2013-06-05 11:09] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.lze/catalyst-total-13.4-3-x86_64.pkg.tar.xz'
    [2013-06-05 11:12] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.QOe/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:14] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.MWT/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:19] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.MKV/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 11:20] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/catalyst-utils-13.4-2-x86_64.pkg.tar.xz /tmp/yaourt-tmp-szebenyib/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:29] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.3qD/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:31] [PACMAN] Running 'pacman -U /tmp/yaourt-tmp-szebenyib/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:33] [PACMAN] Running 'pacman -U --force /tmp/yaourt-tmp-szebenyib/lib32-catalyst-utils-13.4-1-x86_64.pkg.tar.xz'
    [2013-06-05 11:33] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-06-05 11:33] [ALPM-SCRIPTLET] lib32-catalyst-utils works with [multilib] repository
    [2013-06-05 11:33] [ALPM-SCRIPTLET] ----------------------------------------------------------------
    [2013-06-05 11:33] [PACMAN] upgraded lib32-catalyst-utils (13.1-2 -> 13.4-1)
    [2013-06-05 11:33] [PACMAN] Running 'pacman -U tmp/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz tmp/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 11:34] [PACMAN] Running 'pacman -U --force tmp/catalyst-dkms-13.4-1-x86_64.pkg.tar.xz tmp/catalyst-utils-13.4-2-x86_64.pkg.tar.xz'
    [2013-06-05 11:34] [ALPM-SCRIPTLET] [37;44m[1m---------------- I/O BUG ---------------------------------------[0m
    [2013-06-05 11:34] [ALPM-SCRIPTLET] There's a bug in fglrx found by lano1106 which generates
    [2013-06-05 11:34] [ALPM-SCRIPTLET] great amount of unneeded I/O operations
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] To activate workaround enable systemd service:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] systemctl enable temp-links-catalyst
    [2013-06-05 11:34] [ALPM-SCRIPTLET] systemctl start temp-links-catalyst
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] More infos:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1279977#p1279977
    [2013-06-05 11:34] [ALPM-SCRIPTLET] https://bbs.archlinux.org/viewtopic.php?pid=1280193#p1280193
    [2013-06-05 11:34] [ALPM-SCRIPTLET] [37;44m[1m----------------------------------------------------------------[0m
    [2013-06-05 11:34] [PACMAN] upgraded catalyst-utils (13.1-5 -> 13.4-2)
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] -------- Uninstall Beginning --------
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Module: fglrx
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Version: 13.1-2
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Kernel: 3.8.4-1-ARCH (x86_64)
    [2013-06-05 11:34] [ALPM-SCRIPTLET] -------------------------------------
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Status: Before uninstall, this module version was ACTIVE on this kernel.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] fglrx.ko:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Uninstallation
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Deleting from: /usr/lib/modules/3.8.4-1-ARCH/extramodules/
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Original module
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - No original module was found for this module on this kernel.
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Use the dkms install command to reinstall any previous module version.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] depmod.......
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: uninstall completed.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] ------------------------------
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Deleting module version: 13.1-2
    [2013-06-05 11:34] [ALPM-SCRIPTLET] completely from the DKMS tree.
    [2013-06-05 11:34] [ALPM-SCRIPTLET] ------------------------------
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Done.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Creating symlink /var/lib/dkms/fglrx/13.4-1/source ->
    [2013-06-05 11:34] [ALPM-SCRIPTLET] /usr/src/fglrx-13.4-1
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: add completed.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Kernel preparation unnecessary for this kernel. Skipping...
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Building module:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] cleaning build area....
    [2013-06-05 11:34] [ALPM-SCRIPTLET] sh make.sh --nohints --uname_r=3.8.4-1-ARCH --norootcheck........
    [2013-06-05 11:34] [ALPM-SCRIPTLET] cleaning build area....
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: build completed.
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] fglrx.ko:
    [2013-06-05 11:34] [ALPM-SCRIPTLET] Running module version sanity check.
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Original module
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - No original module exists within this kernel
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Installation
    [2013-06-05 11:34] [ALPM-SCRIPTLET] - Installing to /usr/lib/modules/3.8.4-1-ARCH/extramodules/
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] depmod....
    [2013-06-05 11:34] [ALPM-SCRIPTLET]
    [2013-06-05 11:34] [ALPM-SCRIPTLET] DKMS: install completed.
    [2013-06-05 11:34] [PACMAN] upgraded catalyst-dkms (13.1-2 -> 13.4-1)
    [2013-06-05 11:36] [PACMAN] Running 'pacman -R fondu'
    [2013-06-05 11:36] [PACMAN] removed fondu (060102-3)
    [2013-06-05 11:50] [PACMAN] Running 'pacman --color auto -U --force /tmp/yaourt-tmp-szebenyib/PKGDEST.nWC/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
    [2013-06-05 11:50] [ALPM-SCRIPTLET]
    [2013-06-05 11:50] [ALPM-SCRIPTLET] Restarting cups
    [2013-06-05 11:50] [ALPM-SCRIPTLET]
    [2013-06-05 11:50] [ALPM-SCRIPTLET]
    [2013-06-05 11:50] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 11:50] [ALPM-SCRIPTLET] - -
    [2013-06-05 11:50] [ALPM-SCRIPTLET] -Remember to check for foomatic-db-foo2zjs updates as well-
    [2013-06-05 11:50] [ALPM-SCRIPTLET] - -
    [2013-06-05 11:50] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 11:50] [ALPM-SCRIPTLET]
    [2013-06-05 11:50] [PACMAN] reinstalled foo2zjs (20130530-3)
    [2013-06-05 11:50] [PACMAN] Running 'pacman -R foomatic-db-foo2zjs'
    [2013-06-05 11:51] [PACMAN] Running 'pacman -R foomatic-db-foo2zjs foo2zjs'
    [2013-06-05 11:51] [ALPM-SCRIPTLET]
    [2013-06-05 11:51] [ALPM-SCRIPTLET] Restarting cups
    [2013-06-05 11:51] [ALPM-SCRIPTLET]
    [2013-06-05 11:51] [ALPM-SCRIPTLET]
    [2013-06-05 11:51] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 11:51] [ALPM-SCRIPTLET] - -
    [2013-06-05 11:51] [ALPM-SCRIPTLET] - Remember to replace foomatic-db-foo2zjs with -
    [2013-06-05 11:51] [ALPM-SCRIPTLET] - foomatic-db from [extra]. -
    [2013-06-05 11:51] [ALPM-SCRIPTLET] - -
    [2013-06-05 11:51] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 11:51] [ALPM-SCRIPTLET]
    [2013-06-05 11:51] [PACMAN] removed foo2zjs (20130530-3)
    [2013-06-05 11:51] [PACMAN] removed foomatic-db-foo2zjs (4.0.17_20120712-2)
    [2013-06-05 11:51] [PACMAN] Running 'pacman --color auto -S --asdeps --needed --noconfirm extra/enscript'
    [2013-06-05 11:51] [PACMAN] installed enscript (1.6.5.2-2)
    [2013-06-05 12:05] [PACMAN] Running 'pacman --color auto -U --asdeps --noconfirm /tmp/yaourt-tmp-szebenyib/PKGDEST.yFz/foomatic-db-foo2zjs-1:4.0.17_20130518-1-x86_64.pkg.tar.xz'
    [2013-06-05 12:05] [PACMAN] installed foomatic-db-foo2zjs (1:4.0.17_20130518-1)
    [2013-06-05 12:13] [PACMAN] Running 'pacman --color auto -U --noconfirm /tmp/yaourt-tmp-szebenyib/PKGDEST.N1v/foo2zjs-20130530-3-x86_64.pkg.tar.xz'
    [2013-06-05 12:13] [ALPM-SCRIPTLET]
    [2013-06-05 12:13] [ALPM-SCRIPTLET] Restarting cups
    [2013-06-05 12:13] [ALPM-SCRIPTLET]
    [2013-06-05 12:13] [ALPM-SCRIPTLET]
    [2013-06-05 12:13] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - You need to add your user to the lp group. -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - Please refer to the table at http://foo2zjs.rkkda.com/ -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - to choose the appropriate driver for your printer. -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] - -
    [2013-06-05 12:13] [ALPM-SCRIPTLET] -----------------------------------------------------------
    [2013-06-05 12:13] [ALPM-SCRIPTLET]
    [2013-06-05 12:13] [PACMAN] installed foo2zjs (20130530-3)
    [2013-06-05 12:30] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.omZ/plymouth-0.8.8-10-x86_64.pkg.tar.xz'
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] ==================================================================================
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 1. To make Plymouth work:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 1.1. Add "plymouth" to HOOKS after "base" and "udev" in /etc/mkinitcpio.conf
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 1.2. Add 'quiet splash' to the grub command line
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 1.3. Rebuild your initrd image (# mkinitcpio -p [kernel preset name]).
    [2013-06-05 12:30] [ALPM-SCRIPTLET] E.g.: sudo mkinitcpio -p linux
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 2. To enable encryption, replace "encrypt" with "plymouth-encrypt" in
    [2013-06-05 12:30] [ALPM-SCRIPTLET] mkinitcpio.conf and rebuild your initrd image.
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 3. You will also need to rebuild your initrd image every time you change your theme
    [2013-06-05 12:30] [ALPM-SCRIPTLET] (the default is set as 'spinfinity').
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] To list all plymouth themes:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] plymouth-set-default-theme -l
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] To change theme:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] # plymouth-set-default-theme <theme>
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] To rebuild initrd image:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] # mkinitcpio -p linux
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 4. For Smooth Transition to Display Manager you have to:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 4.1. See the Wiki Page (link in 5) to prepare your Display Manager
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 4.2. Disable your Display Manager Unit
    [2013-06-05 12:30] [ALPM-SCRIPTLET] E.g. : systemctl disable kdm.service
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 4.3. Enable the respective DM-plymouth Unit (GDM,KDM,Lightdm,LXDM units provided)
    [2013-06-05 12:30] [ALPM-SCRIPTLET] E.g. : systemctl enable kdm-plymouth.service
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] 5. For more information please visit the Wiki page:
    [2013-06-05 12:30] [ALPM-SCRIPTLET] https://wiki.archlinux.org/index.php/Plymouth
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [ALPM-SCRIPTLET] OBS. If you have any leftover "kill Plymouth" lines in /etc/rc.local or ~/.xinitrc
    [2013-06-05 12:30] [ALPM-SCRIPTLET] they are no longer required.
    [2013-06-05 12:30] [ALPM-SCRIPTLET] ==================================================================================
    [2013-06-05 12:30] [ALPM-SCRIPTLET]
    [2013-06-05 12:30] [PACMAN] reinstalled plymouth (0.8.8-10)
    [2013-06-05 12:30] [PACMAN] Running 'pacman --color auto -S --asdeps --needed community/audit'
    [2013-06-05 12:30] [PACMAN] installed audit (2.2.3-2)
    [2013-06-05 12:32] [PACMAN] Running 'pacman --color auto -U /tmp/yaourt-tmp-szebenyib/PKGDEST.8WE/e4rat-0.2.3-2-x86_64.pkg.tar.xz'
    [2013-06-05 12:32] [PACMAN] upgraded e4rat (0.2.3-1 -> 0.2.3-2)
    [2013-06-05 12:39] [PACMAN] Running 'pacman -R plymouth'
    [2013-06-05 12:39] [PACMAN] removed plymouth (0.8.8-10)
    [2013-06-05 12:41] [PACMAN] Running 'pacman -Syu --ignore filesystem,bash'
    [2013-06-05 12:41] [PACMAN] synchronizing package lists
    [2013-06-05 12:41] [PACMAN] starting full system upgrade
    [2013-06-05 13:04] [PACMAN] upgraded linux-api-headers (3.7.4-1 -> 3.8.4-1)
    [2013-06-05 13:04] [PACMAN] upgraded tzdata (2013b-1 -> 2013c-1)
    [2013-06-05 13:04] [ALPM-SCRIPTLET] Generating locales...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] en_US.UTF-8... done
    [2013-06-05 13:04] [ALPM-SCRIPTLET] hu_HU.UTF-8... done
    [2013-06-05 13:04] [ALPM-SCRIPTLET] Generation complete.
    [2013-06-05 13:04] [PACMAN] upgraded glibc (2.17-3 -> 2.17-6)
    [2013-06-05 13:04] [PACMAN] upgraded lib32-glibc (2.17-2 -> 2.17-5)
    [2013-06-05 13:04] [PACMAN] upgraded lib32-gcc-libs (4.7.2-4 -> 4.8.1-1)
    [2013-06-05 13:04] [PACMAN] upgraded gcc-libs-multilib (4.7.2-4 -> 4.8.1-1)
    [2013-06-05 13:04] [PACMAN] upgraded pcre (8.32-1 -> 8.33-1)
    [2013-06-05 13:04] [PACMAN] upgraded glib2 (2.34.3-1 -> 2.36.2-1)
    [2013-06-05 13:04] [PACMAN] upgraded zlib (1.2.7-1 -> 1.2.8-1)
    [2013-06-05 13:04] [PACMAN] upgraded cracklib (2.8.22-1 -> 2.8.22-3)
    [2013-06-05 13:04] [PACMAN] upgraded libtirpc (0.2.2-4 -> 0.2.3-1)
    [2013-06-05 13:04] [PACMAN] upgraded pam (1.1.6-1 -> 1.1.6-4)
    [2013-06-05 13:04] [PACMAN] upgraded expat (2.1.0-1 -> 2.1.0-2)
    [2013-06-05 13:04] [PACMAN] upgraded gmp (5.1.1-1 -> 5.1.2-1)
    [2013-06-05 13:04] [PACMAN] upgraded libcap (2.22-3 -> 2.22-5)
    [2013-06-05 13:04] [PACMAN] upgraded coreutils (8.21-1 -> 8.21-2)
    [2013-06-05 13:04] [PACMAN] upgraded dbus (1.6.8-6 -> 1.6.10-1)
    [2013-06-05 13:04] [PACMAN] upgraded kbd (1.15.5-3 -> 1.15.5-4)
    [2013-06-05 13:04] [PACMAN] upgraded kmod (12-1 -> 13-2)
    [2013-06-05 13:04] [PACMAN] upgraded hwids (20130228-1 -> 20130512-1)
    [2013-06-05 13:04] [PACMAN] upgraded libgcrypt (1.5.1-1 -> 1.5.2-1)
    [2013-06-05 13:04] [PACMAN] upgraded shadow (4.1.5.1-5 -> 4.1.5.1-6)
    [2013-06-05 13:04] [PACMAN] upgraded util-linux (2.22.2-2 -> 2.23.1-2)
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> The /bin/systemd symlink has been removed. Any references in your
    [2013-06-05 13:04] [ALPM-SCRIPTLET] bootloader (or elsewhere) must be updated to /usr/lib/systemd/systemd.
    [2013-06-05 13:04] [PACMAN] upgraded systemd (198-2 -> 204-3)
    [2013-06-05 13:04] [PACMAN] upgraded nspr (4.9.5-1 -> 4.9.6-1)
    [2013-06-05 13:04] [PACMAN] installed js185 (1.0.0-2)
    [2013-06-05 13:04] [PACMAN] upgraded polkit (0.110-1 -> 0.110-2)
    [2013-06-05 13:04] [PACMAN] upgraded accountsservice (0.6.30-1 -> 0.6.32-1)
    [2013-06-05 13:04] [PACMAN] upgraded acpid (2.0.18-2 -> 2.0.19-1)
    [2013-06-05 13:04] [PACMAN] upgraded alsa-lib (1.0.26-1 -> 1.0.27.1-1)
    [2013-06-05 13:04] [PACMAN] upgraded alsa-plugins (1.0.26-1 -> 1.0.27-1)
    [2013-06-05 13:04] [PACMAN] upgraded dialog (1.2_20121230-1 -> 1.2_20130523-1)
    [2013-06-05 13:04] [PACMAN] upgraded pciutils (3.1.10-1 -> 3.2.0-3)
    [2013-06-05 13:04] [PACMAN] upgraded psmisc (22.19-1 -> 22.20-1)
    [2013-06-05 13:04] [PACMAN] upgraded alsa-utils (1.0.26-1 -> 1.0.27.1-2)
    [2013-06-05 13:04] [PACMAN] upgraded libsasl (2.1.26-2 -> 2.1.26-4)
    [2013-06-05 13:04] [PACMAN] upgraded e2fsprogs (1.42.7-1 -> 1.42.7-2)
    [2013-06-05 13:04] [PACMAN] upgraded libldap (2.4.34-1 -> 2.4.35-4)
    [2013-06-05 13:04] [PACMAN] upgraded apr-util (1.5.1-1 -> 1.5.2-1)
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Kulcsok hozzáfűzése a(z) archlinux.gpg fájlból...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 6 trust: 0-, 0q, 0n, 0m, 0f, 1u
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 6 signed: 64 trust: 1-, 0q, 0n, 5m, 0f, 0u
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 63 signed: 3 trust: 63-, 0q, 0n, 0m, 0f, 0u
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: A bizalmi adatbázis következő ellenőrzése: 2014-01-22.
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízható kulcsok aláírása helyileg a kulcstartóban...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 0E8B644079F599DFC1DDC3973348882F6AC6A4C2 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 684148BB25B49E986A4944C55184252D824B18E8 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 44D4A033AC140143927397D47EFD567D4C7EA887 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 27FFC4769E19F096D41D9265A04F9397CDFD6BB0 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> AB19265E5D7D20687D303246BA1DFB64FFF979E7 kulcs aláírása helyileg...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízhatósági értékek importálása...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Visszavont kulcsok tiltása a kulcstartóban...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 1390420191 kulcs tiltása...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> E2539214C6C11350 kulcs tiltása...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] -> 8544EA82113502DE kulcs tiltása...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] ==> Megbízhatósági adatbázis frissítése...
    [2013-06-05 13:04] [ALPM-SCRIPTLET] gpg: A bizalmi adatbázis következő ellenőrzése: 2014-01-22.
    [2013-06-05 13:04] [PACMAN] upgraded archlinux-keyring (20130224-1 -> 20130525-1)
    [2013-06-05 13:04] [PACMAN] upgraded libxau (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:04] [PACMAN] upgraded libxcb (1.9-3 -> 1.9.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded libx11 (1.5.0-2 -> 1.6.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxext (1.3.1-1 -> 1.3.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxi (1.7-1 -> 1.7.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxfixes (5.0-2 -> 5.0.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxtst (1.2.1-1 -> 1.2.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded at-spi2-core (2.6.3-1 -> 2.8.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded atk (2.6.0-1 -> 2.8.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded at-spi2-atk (2.6.2-1 -> 2.8.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded libsigc++ (2.2.11-1 -> 2.3.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded glibmm (2.34.1-1 -> 2.36.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded atkmm (2.22.6-1 -> 2.22.7-1)
    [2013-06-05 13:05] [PACMAN] upgraded perl (5.16.3-1 -> 5.18.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded automake (1.13.1-1 -> 1.13.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded avahi (0.6.31-6 -> 0.6.31-9)
    [2013-06-05 13:05] [PACMAN] upgraded libpng (1.5.14-1 -> 1.6.2-3)
    [2013-06-05 13:05] [ALPM-SCRIPTLET] updating font cache... done.
    [2013-06-05 13:05] [PACMAN] upgraded fontconfig (2.10.2-1 -> 2.10.93-1)
    [2013-06-05 13:05] [PACMAN] upgraded pixman (0.28.2-1 -> 0.30.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded libdrm (2.4.43-1 -> 2.4.45-1)
    [2013-06-05 13:05] [PACMAN] upgraded wayland (1.0.6-1 -> 1.1.0-1)
    [2013-06-05 13:05] [PACMAN] upgraded libxxf86vm (1.1.2-1 -> 1.1.3-1)
    [2013-06-05 13:05] [PACMAN] installed llvm-amdgpu-lib-snapshot (20130403-3)
    [2013-06-05 13:05] [PACMAN] upgraded mesa (9.1.1-1 -> 9.1.3-1)
    [2013-06-05 13:05] [PACMAN] upgraded cairo (1.12.14-3 -> 1.12.14-4)
    [2013-06-05 13:05] [PACMAN] upgraded libjpeg-turbo (1.2.1-1 -> 1.3.0-2)
    [2013-06-05 13:05] [PACMAN] upgraded libtiff (4.0.3-1 -> 4.0.3-2)
    [2013-06-05 13:05] [ALPM-SCRIPTLET] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libpng15.so.15: cannot open shared object file: No such file or directory
    [2013-06-05 13:05] [PACMAN] upgraded gdk-pixbuf2 (2.26.5-2 -> 2.28.1-2)
    [2013-06-05 13:05] [PACMAN] upgraded giflib (4.1.6-5 -> 4.2.1-2)
    [2013-06-05 13:05] [PACMAN] upgraded imlib2 (1.4.5-2 -> 1.4.5-4)
    [2013-06-05 13:05] [PACMAN] upgraded libxcursor (1.1.13-1 -> 1.1.14-1)
    [2013-06-05 13:05] [PACMAN] upgraded lua (5.2.1-3 -> 5.2.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded icu (51.1-1 -> 51.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded graphite (1:1.2.1-1 -> 1:1.2.2-1)
    [2013-06-05 13:05] [PACMAN] upgraded harfbuzz (0.9.14-1 -> 0.9.17-2)
    [2013-06-05 13:05] [ALPM-SCRIPTLET] /tmp/alpm_DTKAFN/.INSTALL: sor: 5: sbin/ldconfig: Nincs ilyen fájl vagy könyvtár
    [2013-06-05 13:05] [PACMAN] upgraded pango (1.32.5-1 -> 1.34.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded awesome (3.5-2 -> 3.5.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded bash-completion (2.0-3 -> 2.1-2)
    [2013-06-05 13:05] [PACMAN] upgraded binutils-multilib (2.23.1-3 -> 2.23.2-2)
    [2013-06-05 13:05] [PACMAN] upgraded m4 (1.4.16-2 -> 1.4.16-3)
    [2013-06-05 13:05] [PACMAN] upgraded bison (2.7-1 -> 2.7.1-1)
    [2013-06-05 13:05] [PACMAN] upgraded sqlite (3.7.16.1-1 -> 3.7.17-1)
    [2013-06-05 13:05] [PACMAN] upgraded python2 (2.7.3-4 -> 2.7.5-1)
    [2013-06-05 13:05] [PACMAN] upgraded bluez (4.101-1 -> 4.101-2)
    [2013-06-05 13:05] [PACMAN] upgraded gtk-update-icon-cache (2.24.17-1 -> 2.24.18-1)
    [2013-06-05 13:05] [PACMAN] upgraded librsvg (2.36.4-1 -> 2.37.0-2)
    [2013-06-05 13:06] [PACMAN] upgraded gnome-icon-theme-symbolic (3.6.2-1 -> 3.8.2.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded gnome-icon-theme (3.6.2-1 -> 3.8.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded libpulse (3.0-2 -> 3.0-3)
    [2013-06-05 13:06] [PACMAN] upgraded libusbx (1.0.14-1 -> 1.0.15-1)
    [2013-06-05 13:06] [PACMAN] upgraded openobex (1.5-3 -> 1.7-5)
    [2013-06-05 13:06] [PACMAN] upgraded libltdl (2.4.2-7 -> 2.4.2-9)
    [2013-06-05 13:06] [PACMAN] upgraded libxt (1.1.3-1 -> 1.1.4-1)
    [2013-06-05 13:06] [PACMAN] upgraded liblqr (0.4.1-3 -> 0.4.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded imagemagick (6.8.4.0-1 -> 6.8.5.7-1)
    [2013-06-05 13:06] [PACMAN] upgraded obex-data-server (0.4.6-5 -> 0.4.6-7)
    [2013-06-05 13:06] [PACMAN] upgraded blueman (1.23-5 -> 1.23-6)
    [2013-06-05 13:06] [PACMAN] upgraded boost-libs (1.52.0-3 -> 1.53.0-2)
    [2013-06-05 13:06] [PACMAN] upgraded boost (1.52.0-3 -> 1.53.0-2)
    [2013-06-05 13:06] [PACMAN] upgraded sed (4.2.2-2 -> 4.2.2-3)
    [2013-06-05 13:06] [PACMAN] upgraded ca-certificates (20130119-1 -> 20130119-2)
    [2013-06-05 13:06] [PACMAN] upgraded ca-certificates-java (20121112+nmu2-1 -> 20121112+nmu2-2)
    [2013-06-05 13:06] [PACMAN] upgraded cairo-perl (1.082-2 -> 1.103-2)
    [2013-06-05 13:06] [PACMAN] upgraded cairomm (1.10.0-2 -> 1.10.0-3)
    [2013-06-05 13:06] [PACMAN] upgraded libxml2 (2.8.0-1 -> 2.9.1-2)
    [2013-06-05 13:06] [PACMAN] upgraded libbluray (0.2.3-1 -> 0.3.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded libva (1.1.0-2 -> 1.1.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded libvpx (1.1.0-1 -> 1.2.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded openjpeg (1.5.0-1 -> 1.5.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded opus (1.0.2-1 -> 1.0.2-2)
    [2013-06-05 13:06] [PACMAN] upgraded rtmpdump (20121203-1 -> 20121203-2)
    [2013-06-05 13:06] [PACMAN] upgraded v4l-utils (0.9.3-2 -> 0.9.5-2)
    [2013-06-05 13:06] [PACMAN] upgraded ffmpeg (1:1.2-1 -> 1:1.2.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded chromaprint (0.7-4 -> 0.7-5)
    [2013-06-05 13:06] [PACMAN] upgraded keyutils (1.5.5-3 -> 1.5.5-5)
    [2013-06-05 13:06] [PACMAN] upgraded krb5 (1.11.1-1 -> 1.11.2-4)
    [2013-06-05 13:06] [PACMAN] installed libbsd (0.4.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded libwbclient (3.6.13-1 -> 4.0.6-1)
    [2013-06-05 13:06] [PACMAN] upgraded cifs-utils (5.9-1 -> 6.0-2)
    [2013-06-05 13:06] [PACMAN] upgraded cogl (1.10.4-1 -> 1.14.0-3)
    [2013-06-05 13:06] [PACMAN] upgraded json-glib (0.15.2-1 -> 0.16.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded xkeyboard-config (2.8-1 -> 2.9-1)
    [2013-06-05 13:06] [PACMAN] upgraded libxkbcommon (0.2.0-3 -> 0.3.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded clutter (1.12.2-1 -> 1.14.4-2)
    [2013-06-05 13:06] [PACMAN] upgraded libtasn1 (3.2-1 -> 3.3-1)
    [2013-06-05 13:06] [PACMAN] upgraded nettle (2.6-1 -> 2.7.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded p11-kit (0.13-1 -> 0.18.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded gnutls (3.1.10-1 -> 3.2.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded libcups (1.6.2-1 -> 1.6.2-2)
    [2013-06-05 13:06] [PACMAN] upgraded libxinerama (1.1.2-1 -> 1.1.3-1)
    [2013-06-05 13:06] [PACMAN] upgraded libxrandr (1.4.0-1 -> 1.4.1-1)
    [2013-06-05 13:06] [PACMAN] upgraded libgusb (0.1.4-1 -> 0.1.6-1)
    [2013-06-05 13:06] [PACMAN] upgraded dconf (0.14.1-1 -> 0.16.0-1)
    [2013-06-05 13:06] [ALPM] warning: /etc/colord.conf installed as /etc/colord.conf.pacnew
    [2013-06-05 13:06] [PACMAN] upgraded colord (0.1.31-1 -> 1.0.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded gtk3 (3.6.4-2 -> 3.8.2-1)
    [2013-06-05 13:06] [PACMAN] upgraded clutter-gtk (1.4.2-1 -> 1.4.4-1)
    [2013-06-05 13:06] [PACMAN] upgraded curl (7.29.0-2 -> 7.30.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded cmake (2.8.10.2-5 -> 2.8.11-2)
    [2013-06-05 13:06] [PACMAN] upgraded cpupower (3.8-1 -> 3.9-3)
    [2013-06-05 13:06] [PACMAN] upgraded cronie (1.4.9-2 -> 1.4.9-4)
    [2013-06-05 13:06] [PACMAN] upgraded device-mapper (2.02.98-3 -> 2.02.98-4)
    [2013-06-05 13:06] [PACMAN] upgraded popt (1.16-5 -> 1.16-6)
    [2013-06-05 13:06] [PACMAN] upgraded cryptsetup (1.6.0-1 -> 1.6.1-2)
    [2013-06-05 13:06] [PACMAN] upgraded poppler (0.22.2-1 -> 0.22.4-1)
    [2013-06-05 13:06] [PACMAN] upgraded qpdf (4.0.1-1 -> 4.1.0-1)
    [2013-06-05 13:06] [PACMAN] upgraded cups-filters (1.0.31-1 -> 1.0.34-4)
    [2013-06-05 13:07] [PACMAN] upgraded cups (1.6.2-1 -> 1.6.2-2)
    [2013-06-05 13:07] [PACMAN] upgraded dash (0.5.7-3 -> 0.5.7-4)
    [2013-06-05 13:07] [PACMAN] upgraded iptables (1.4.18-1 -> 1.4.19.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded iproute2 (3.8.0-1 -> 3.9.0-2)
    [2013-06-05 13:07] [PACMAN] upgraded dhclient (4.2.5-1 -> 4.2.5.p1-2)
    [2013-06-05 13:07] [PACMAN] upgraded dhcpcd (5.6.7-1 -> 5.6.8-3)
    [2013-06-05 13:07] [PACMAN] upgraded libksba (1.2.0-3 -> 1.3.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded dirmngr (1.1.0-4 -> 1.1.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded gcc-multilib (4.7.2-4 -> 4.8.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded dkms (2.2.0.3-13 -> 2.2.0.3-14)
    [2013-06-05 13:07] [PACMAN] upgraded libxslt (1.1.26-3 -> 1.1.28-1)
    [2013-06-05 13:07] [PACMAN] upgraded docbook-xsl (1.78.0-1 -> 1.78.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded gtk2 (2.24.17-1 -> 2.24.18-1)
    [2013-06-05 13:07] [PACMAN] upgraded dropbox (1.6.16-1 -> 2.0.16-1)
    [2013-06-05 13:07] [ALPM-SCRIPTLET] /tmp/alpm_NMeaOd/.INSTALL: sor: 9: sbin/ldconfig: Nincs ilyen fájl vagy könyvtár
    [2013-06-05 13:07] [PACMAN] upgraded fakeroot (1.18.4-1 -> 1.19-1)
    [2013-06-05 13:07] [PACMAN] upgraded file-roller (3.6.3-2 -> 3.8.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded wxgtk (2.8.12.1-4 -> 2.8.12.1-5)
    [2013-06-05 13:07] [PACMAN] upgraded filezilla (3.6.0.2-1 -> 3.7.0.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded nss (3.14.3-2 -> 3.14.3-3)
    [2013-06-05 13:07] [PACMAN] upgraded firefox (19.0.2-1 -> 21.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded libogg (1.3.0-1 -> 1.3.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded flac (1.2.1-3 -> 1.3.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded flashplugin (11.2.202.275-1 -> 11.2.202.285-1)
    [2013-06-05 13:07] [PACMAN] upgraded foomatic-filters (1:4.0.17_20120712-1 -> 1:4.0.17_20130518-1)
    [2013-06-05 13:07] [PACMAN] upgraded foomatic-db-engine (1:4.0.17_20120712-1 -> 1:4.0.17_20130518-1)
    [2013-06-05 13:07] [PACMAN] upgraded freeglut (2.8.0-2 -> 2.8.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded fuse (2.9.2-1 -> 2.9.2-3)
    [2013-06-05 13:07] [PACMAN] upgraded libxfce4util (4.10.0-1 -> 4.10.1-2)
    [2013-06-05 13:07] [PACMAN] upgraded garcon (0.2.0-1 -> 0.2.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded gawk (4.0.2-1 -> 4.1.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded gconf (3.2.6-1 -> 3.2.6-2)
    [2013-06-05 13:07] [PACMAN] upgraded gcr (3.6.2-2 -> 3.8.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded gd (2.0.36RC1-5 -> 2.0.36RC1-6)
    [2013-06-05 13:07] [PACMAN] upgraded geany (1.23-1 -> 1.23.1-1)
    [2013-06-05 13:07] [PACMAN] upgraded geoip-database (20130206-1 -> 20130514-1)
    [2013-06-05 13:07] [PACMAN] upgraded geoip (1.4.8-2 -> 1.5.0-1)
    [2013-06-05 13:07] [PACMAN] upgraded ghostscript (9.07-1 -> 9.07-2)
    [2013-06-05 13:07] [PACMAN] upgraded perl-error (0.17019-1 -> 0.17020-1)
    [2013-06-05 13:07] [PACMAN] upgraded git (1.8.2-1 -> 1.8.3-1)
    [2013-06-05 13:07] [PACMAN] upgraded libproxy (0.4.11-1 -> 0.4.11-2)
    [2013-06-05 13:07] [PACMAN] upgraded gsettings-desktop-schemas (3.6.1-1 -> 3.8.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded glib-networking (2.34.2-1 -> 2.36.2-1)
    [2013-06-05 13:07] [PACMAN] upgraded glib-perl (1.260-1 -> 1.280-3)
    [2013-06-05 13:07] [PACMAN] upgraded gmtk (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:07] [PACMAN] upgraded libatasmart (0.19-1 -> 0.19-2)
    [2013-06-05 13:07] [PACMAN] upgraded udisks2 (2.0.1-1 -> 2.1.0-3)
    [2013-06-05 13:07] [PACMAN] upgraded libsecret (0.14-1 -> 0.15-1)
    [2013-06-05 13:08] [PACMAN] upgraded gnome-disk-utility (3.6.1-1 -> 3.8.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded lirc-utils (1:0.9.0-39 -> 1:0.9.0-46)
    [2013-06-05 13:08] [PACMAN] installed tevent (0.9.18-1)
    [2013-06-05 13:08] [PACMAN] installed ldb (1.1.15-1)
    [2013-06-05 13:08] [PACMAN] upgraded smbclient (3.6.13-1 -> 4.0.6-1)
    [2013-06-05 13:08] [PACMAN] upgraded libxxf86dga (1.1.3-1 -> 1.1.4-1)
    [2013-06-05 13:08] [PACMAN] upgraded mpg123 (1.15.1-1 -> 1.15.4-1)
    [2013-06-05 13:08] [PACMAN] upgraded libcdio-paranoia (10.2+0.90-1 -> 10.2+0.90+1-1)
    [2013-06-05 13:08] [PACMAN] upgraded mplayer (35920-1 -> 36285-1)
    [2013-06-05 13:08] [PACMAN] upgraded gnome-mplayer (1.0.7-2 -> 1.0.8-1)
    [2013-06-05 13:08] [PACMAN] upgraded pango-perl (1.223-2 -> 1.224-2)
    [2013-06-05 13:08] [PACMAN] upgraded gtk2-perl (1.244-1 -> 1.247-2)
    [2013-06-05 13:08] [PACMAN] upgraded gnome-vfs-perl (1.081-6 -> 1.081-7)
    [2013-06-05 13:08] [PACMAN] upgraded gnomecanvas-perl (1.002-10 -> 1.002-11)
    [2013-06-05 13:08] [PACMAN] upgraded pinentry (0.8.2-2 -> 0.8.3-1)
    [2013-06-05 13:08] [PACMAN] upgraded gnupg (2.0.19-6 -> 2.0.20-2)
    [2013-06-05 13:08] [PACMAN] upgraded python2-mako (0.7.3-1 -> 0.8.1-1)
    [2013-06-05 13:08] [PACMAN] upgraded gobject-introspection (1.34.2-1 -> 1.36.0-1)
    [2013-06-05 13:08] [PACMAN] upgraded parted (3.1-1 -> 3.1-2)
    [2013-06-05 13:08] [PACMAN] upgraded pangomm (2.28.4-1 -> 2.34.0-1)
    [2013-06-05 13:08] [PACMAN] upgraded gtkmm (2.24.2-2 -> 2.24.3-1)
    [2013-06-05 13:08] [PACMAN] upgraded gparted (0.15.0-1 -> 0.16.1-5)
    [2013-06-05 13:08] [PACMAN] upgraded gpgme (1.3.2-1 -> 1.4.1-1)
    [2013-06-05 13:08] [PACMAN] upgraded gpm (1.20.7-1 -> 1.20.7-3)
    [2013-06-05 13:08] [PACMAN] upgraded groff (1.22.2-2 -> 1.22.2-3)
    [2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10 (0.10.36-1 -> 0.10.36-2)
    [2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10-good (0.10.31-1 -> 0.10.31-3)
    [2013-06-05 13:08] [ALPM-SCRIPTLET] /tmp/alpm_i2PHDJ/.INSTALL: sor: 18: usr/sbin/gconfpkg: Nincs ilyen fájl vagy könyvtár
    [2013-06-05 13:08] [ALPM-SCRIPTLET] /tmp/alpm_EvtktN/.INSTALL: sor: 4: usr/sbin/gconfpkg: Nincs ilyen fájl vagy könyvtár
    [2013-06-05 13:08] [PACMAN] upgraded gstreamer0.10-good-plugins (0.10.31-1 -> 0.10.31-3)
    [2013-06-05 13:08] [PACMAN] installed gstreamer (1.0.7-1)
    [2013-06-05 13:08] [PACMAN] upgraded orc (0.4.16-1 -> 0.4.17-1)
    [2013-06-05 13:08] [PACMAN] upgraded libxv (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:08] [PACMAN] installed gst-plugins-base-libs (1.0.7-1)
    [2013-06-05 13:08] [PACMAN] upgraded libwebp (0.2.1-1 -> 0.3.0-3)
    [2013-06-05 13:08] [PACMAN] installed geoclue (0.12.99-1)
    [2013-06-05 13:08] [PACMAN] installed webkitgtk3 (2.0.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded gthumb (3.1.2-1 -> 3.2.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded gtkmm3 (3.6.0-1 -> 3.8.1-1)
    [2013-06-05 13:08] [PACMAN] upgraded gvfs (1.14.2-4 -> 1.16.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded gvfs-smb (1.14.2-4 -> 1.16.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded vim-runtime (7.3.875-1 -> 7.3.918-2)
    [2013-06-05 13:08] [PACMAN] upgraded ruby (2.0.0_p0-1 -> 2.0.0_p195-1)
    [2013-06-05 13:08] [PACMAN] upgraded gvim (7.3.875-1 -> 7.3.918-2)
    [2013-06-05 13:08] [PACMAN] upgraded hddtemp (0.3.beta15.52-1 -> 0.3.beta15.52-2)
    [2013-06-05 13:08] [PACMAN] upgraded hdparm (9.43-1 -> 9.43-2)
    [2013-06-05 13:08] [PACMAN] upgraded pygobject-devel (3.4.2-1 -> 3.8.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded python2-gobject (3.4.2-1 -> 3.8.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded ibus (1.5.1-1 -> 1.5.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded jre7-openjdk-headless (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
    [2013-06-05 13:08] [PACMAN] upgraded jre7-openjdk (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
    [2013-06-05 13:08] [PACMAN] upgraded icedtea-web-java7 (1.3.1-2 -> 1.4-1)
    [2013-06-05 13:08] [PACMAN] upgraded ilmbase (1.0.3-1 -> 2.0.0-1)
    [2013-06-05 13:08] [PACMAN] upgraded inetutils (1.9.1-4 -> 1.9.1-6)
    [2013-06-05 13:08] [PACMAN] upgraded python (3.3.0-3 -> 3.3.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded iotop (0.5-1 -> 0.5-2)
    [2013-06-05 13:08] [PACMAN] upgraded iputils (20121221-1 -> 20121221-2)
    [2013-06-05 13:08] [PACMAN] upgraded isl (0.11.1-1 -> 0.11.2-1)
    [2013-06-05 13:08] [PACMAN] upgraded jbig2dec (0.11-5 -> 0.11-6)
    [2013-06-05 13:08] [PACMAN] upgraded jdk7-openjdk (7.u17_2.3.8-1 -> 7.u21_2.3.9-4)
    [2013-06-05 13:08] [PACMAN] upgraded jfsutils (1.1.15-3 -> 1.1.15-4)
    [2013-06-05 13:08] [PACMAN] upgraded js (1.8.5-3 -> 17.0.0-1)
    [2013-06-05 13:08] [PACMAN] upgraded strigi (0.7.8-2 -> 0.7.8-3)
    [2013-06-05 13:09] [PACMAN] upgraded qt4 (4.8.4-16 -> 4.8.4-18)
    [2013-06-05 13:09] [PACMAN] upgraded virtuoso-base (6.1.6-1 -> 6.1.6-2)
    [2013-06-05 13:09] [PACMAN] upgraded soprano (2.9.0-2 -> 2.9.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded openexr (1.7.1-2 -> 2.0.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded procps-ng (3.3.7-1 -> 3.3.8-1)
    [2013-06-05 13:09] [PACMAN] upgraded pm-utils (1.4.1-5 -> 1.4.1-6)
    [2013-06-05 13:09] [PACMAN] upgraded libplist (1.8-2 -> 1.10-1)
    [2013-06-05 13:09] [PACMAN] upgraded usbmuxd (1.0.8-1 -> 1.0.8-2)
    [2013-06-05 13:09] [PACMAN] upgraded libimobiledevice (1.1.4-2 -> 1.1.5-1)
    [2013-06-05 13:09] [PACMAN] upgraded upower (0.9.20-1 -> 0.9.20-2)
    [2013-06-05 13:09] [PACMAN] upgraded qtwebkit (2.3.0-1 -> 2.3.1-2)
    [2013-06-05 13:09] [PACMAN] upgraded kdelibs (4.10.1-2 -> 4.10.3-3)
    [2013-06-05 13:09] [ALPM-SCRIPTLET] gtk-update-icon-cache: Cache file created successfully.
    [2013-06-05 13:09] [PACMAN] upgraded klavaro (1.9.6-1 -> 1.9.7-1)
    [2013-06-05 13:09] [PACMAN] upgraded laptop-mode-tools (1.63-1 -> 1.63-2)
    [2013-06-05 13:09] [PACMAN] upgraded less (451-1 -> 458-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-alsa-lib (1.0.26-1 -> 1.0.27.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-dbus-core (1.6.8-1 -> 1.6.10-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-fontconfig (2.10.2-1 -> 2.10.93-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-zlib (1.2.7-1 -> 1.2.8-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-glib2 (2.34.3-1 -> 2.36.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-glu (9.0.0-1 -> 9.0.0-2)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libjpeg-turbo (1.2.1-1 -> 1.3.0-2)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libpng (1.5.14-1 -> 1.6.2-1)
    [2013-06-05 13:09] [PACMAN] installed lib32-xz (5.0.4-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libtiff (4.0.3-1 -> 4.0.3-2)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxau (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxcb (1.9-2 -> 1.9.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxfixes (5.0-1 -> 5.0.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxcursor (1.1.13-1 -> 1.1.14-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxext (1.3.1-1 -> 1.3.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxi (1.7-1 -> 1.7.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxrandr (1.4.0-1 -> 1.4.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-libxv (1.0.7-1 -> 1.0.8-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-sqlite (3.7.16-1 -> 3.7.17-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-qt4 (4.8.4-4 -> 4.8.4-5)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-util-linux (2.22.2-1 -> 2.23.1-1)
    [2013-06-05 13:09] [PACMAN] upgraded lib32-v4l-utils (0.9.3-1 -> 0.9.5-1)
    [2013-06-05 13:09] [PACMAN] upgraded libbonobo (2.32.1-3 -> 2.32.1-4)
    [2013-06-05 13:09] [PACMAN] upgraded libburn (1.2.8-1 -> 1.3.0.pl01-1)
    [2013-06-05 13:09] [PACMAN] upgraded libdmx (1.1.2-1 -> 1.1.3-1)
    [2013-06-05 13:09] [PACMAN] upgraded libdvbpsi (0.2.2-1 -> 1:0.2.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded libfontenc (1.1.1-1 -> 1.1.2-1)
    [2013-06-05 13:09] [PACMAN] upgraded libgnome-keyring (3.6.0-2 -> 3.8.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded libgpod (0.8.2-6 -> 0.8.2-7)
    [2013-06-05 13:09] [PACMAN] upgraded libgxps (0.2.2-2 -> 0.2.2-3)
    [2013-06-05 13:09] [PACMAN] upgraded libical (0.48-1 -> 1.0-2)
    [2013-06-05 13:09] [PACMAN] upgraded libisofs (1.2.8-1 -> 1.3.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded libkate (0.4.1-3 -> 0.4.1-4)
    [2013-06-05 13:09] [PACMAN] upgraded liblastfm (1.0.6-2 -> 1.0.7-1)
    [2013-06-05 13:09] [PACMAN] upgraded libmicrohttpd (0.9.25-1 -> 0.9.27-1)
    [2013-06-05 13:09] [PACMAN] upgraded libnfs (1.3.0-1 -> 1.5.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded libpcap (1.3.0-3 -> 1.4.0-1)
    [2013-06-05 13:09] [PACMAN] upgraded libpipeline (1.2.2-1 -> 1.2.3-1)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-hu (4.0.1-1 -> 4.0.3-1)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-common (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-base (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-calc (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-draw (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-gnome (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-impress (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-kde4 (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-math (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded postgresql-libs (9.2.3-1 -> 9.2.4-2)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-postgresql-connector (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:09] [PACMAN] upgraded libreoffice-sdk (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:10] [PACMAN] upgraded libreoffice-sdk-doc (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:10] [PACMAN] upgraded libwpd (0.9.4-1 -> 0.9.6-1)
    [2013-06-05 13:10] [PACMAN] upgraded libwps (0.2.7-1 -> 0.2.9-1)
    [2013-06-05 13:10] [PACMAN] upgraded libreoffice-writer (4.0.1-5 -> 4.0.3-3)
    [2013-06-05 13:10] [PACMAN] upgraded libshairport (1.2.1-2 -> 1.2.1.20121215-1)
    [2013-06-05 13:10] [PACMAN] upgraded tar (1.26-2 -> 1.26-4)
    [2013-06-05 13:10] [PACMAN] upgraded libtool (2.4.2-7 -> 2.4.2-9)
    [2013-06-05 13:10] [PACMAN] upgraded libtorrent-rasterbar (1:0.16.9-1 -> 1:0.16.10-1)
    [2013-06-05 13:10] [PACMAN] upgraded libxres (1.0.6-1 -> 1.0.7-1)
    [2013-06-05 13:10] [PACMAN] upgraded linux-firmware (20121118-1 -> 20130528-1)
    [2013-06-05 13:10] [PACMAN] upgraded mkinitcpio (0.13.0-1 -> 0.14.0-1)
    [2013-06-05 13:10] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-06-05 13:10] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.4-1-ARCH
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [v86d]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth' cannot be found
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth-encrypt' cannot be found
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: file not found: `/usr/sbin/dmsetup'
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [resume]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: errors were encountered during the build. The image may not be complete.
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.4-1-ARCH
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [v86d]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth' cannot be found
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: Hook 'plymouth-encrypt' cannot be found
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [lvm2]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> ERROR: file not found: `/usr/sbin/dmsetup'
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [resume]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] -> Running build hook: [shutdown]
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-06-05 13:10] [ALPM-SCRIPTLET] ==> WARNING: errors were encountered during the build. The image may not be complete.
    [2013-06-05 13:10] [PACMAN] upgraded linux (3.8.4-1 -> 3.9.4-1)
    [2013-06-05 13:10] [PACMAN] upgraded linux-headers (3.8.4-1 -> 3.9.4-1)
    [2013-06-05 13:10] [PACMAN] upgraded linux-lts-headers (3.0.71-1 -> 3.0.80-1)
    [2013-06-05 13:10] [PACMAN] upgraded lm_sensors (3.3.3-1 -> 3.3.4-1)
    [2013-06-05 13:10] [PACMAN] upgraded logrotate (3.8.3-1 -> 3.8.4-2)
    [2013-06-05 13:10] [PACMAN] upgraded lsof (4.87-1 -> 4.87-2)
    [2013-06-05 13:10] [PACMAN] upgraded lvm2 (2.02.98-3 -> 2.02.98-4)
    [2013-06-05 13:10] [PACMAN] upgraded man-db (2.6.3-1 -> 2.6.3-3)
    [2013-06-05 13:11] [PACMAN] upgraded man-pages (3.50-1 -> 3.51-1)
    [2013-06-05 13:11] [PACMAN] upgraded mdadm (3.2.6-3 -> 3.2.6-4)
    [2013-06-05 13:11] [PACMAN] upgraded meld (1.7.1-1 -> 1.7.3-1)
    [2013-06-05 13:11] [PACMAN] upgraded mercurial (2.5.2-1 -> 2.6.2-1)
    [2013-06-05 13:11] [PACMAN] upgraded zenity (3.6.0-1 -> 3.8.0-1)
    [2013-06-05 13:11] [PACMAN] upgraded metacity (2.34.13-1 -> 2.34.13-5)
    [2013-06-05 13:11] [PACMAN] upgraded mjpegtools (2.0.0-2 -> 2.0.0-3)
    [2013-06-05 13:11] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2013-06-05 13:11] [PACMAN] upgraded pacman-mirrorlist (20130323-1 -> 20130601-1)
    [2013-06-05 13:11] [PACMAN] upgraded pacman (4.1.0-2 -> 4.1.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded pyalpm (0.5.3-2 -> 0.6.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded namcap (3.2.4-2 -> 3.2.5-1)
    [2013-06-05 13:11] [PACMAN] upgraded net-tools (1.60.20120804git-2 -> 1.60.20130531git-1)
    [2013-06-05 13:11] [PACMAN] upgraded xinetd (2.3.15-2 -> 2.3.15-3)
    [2013-06-05 13:11] [PACMAN] upgraded netkit-bsd-finger (0.17-7 -> 0.17-8)
    [2013-06-05 13:11] [PACMAN] upgraded wpa_supplicant (2.0-3 -> 2.0-4)
    [2013-06-05 13:11] [PACMAN] upgraded ppp (2.4.5-5 -> 2.4.5-6)
    [2013-06-05 13:11] [PACMAN] installed libqmi (1.2.0-2)
    [2013-06-05 13:11] [PACMAN] installed libmbim (1.0.0-1)
    [2013-06-05 13:11] [PACMAN] installed modemmanager (0.7.990-5)
    [2013-06-05 13:11] [PACMAN] upgraded networkmanager (0.9.8.0-2 -> 0.9.8.0-4)
    [2013-06-05 13:11] [PACMAN] upgraded network-manager-applet (0.9.8.0-1 -> 0.9.8.0-3)
    [2013-06-05 13:11] [PACMAN] upgraded python2-distribute (0.6.34-1 -> 0.6.40-1)
    [2013-06-05 13:11] [PACMAN] upgraded sip (4.14.5-1 -> 4.14.6-1)
    [2013-06-05 13:11] [PACMAN] upgraded python2-sip (4.14.5-1 -> 4.14.6-1)
    [2013-06-05 13:11] [PACMAN] upgraded pyqt-common (4.10-1 -> 4.10.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded python2-pyqt (4.10-1 -> 4.10.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded ninja-ide (2.1.1-1 -> 2.2-1)
    [2013-06-05 13:11] [PACMAN] upgraded ntfs-3g (2013.1.13-2 -> 2013.1.13-3)
    [2013-06-05 13:11] [PACMAN] upgraded ntp (4.2.6.p5-13 -> 4.2.6.p5-14)
    [2013-06-05 13:11] [ALPM-SCRIPTLET]
    [2013-06-05 13:11] [ALPM-SCRIPTLET] ==> The sshd daemon has been moved to /usr/bin alongside all binaries.
    [2013-06-05 13:11] [ALPM-SCRIPTLET] ==> Please update this path in your scripts if applicable.
    [2013-06-05 13:11] [ALPM-SCRIPTLET]
    [2013-06-05 13:11] [PACMAN] upgraded openssh (6.2p1-1 -> 6.2p2-1)
    [2013-06-05 13:11] [PACMAN] upgraded opera (12.14.1738-1 -> 12.15.1748-1)
    [2013-06-05 13:11] [PACMAN] upgraded xfce4-panel (4.10.0-1 -> 4.10.1-1)
    [2013-06-05 13:11] [PACMAN] upgraded orage (4.8.4-1 -> 4.8.4-2)
    [2013-06-05 13:11] [PACMAN] upgraded pcmciautils (018-6 -> 018-7)
    [2013-06-05 13:11] [PACMAN] upgraded perl-bit-vector (7.2-2 -> 7.2-3)
    [2013-06-05 13:11] [PACMAN] upgraded perl-digest-sha1 (2.13-3 -> 2.13-4)
    [2013-06-05 13:11] [PACMAN] upgraded perl-gd (2.49-1 -> 2.49-2)
    [2013-06-05 13:11] [PACMAN] upgraded perl-html-parser (3.69-2 -> 3.71-2)
    [2013-06-05 13:11] [PACMAN] upgraded perl-image-exiftool (9.13-1 -> 9.27-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-net-ssleay (1.52-1 -> 1.54-2)
    [2013-06-05 13:11] [PACMAN] upgraded perl-io-socket-ssl (1.81-1 -> 1.94-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-json (2.53-2 -> 2.58-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-json-xs (2.33-1 -> 2.33-2)
    [2013-06-05 13:11] [PACMAN] upgraded perl-libwww (6.04-1 -> 6.05-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-locale-gettext (1.05-9 -> 1.05-10)
    [2013-06-05 13:11] [PACMAN] upgraded perl-lwp-protocol-https (6.03-1 -> 6.04-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-net-dbus (1.0.0-2 -> 1.0.0-3)
    [2013-06-05 13:11] [PACMAN] upgraded perl-test-pod (1.46-1 -> 1.48-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-text-iconv (1.7-7 -> 1.7-8)
    [2013-06-05 13:11] [PACMAN] upgraded perl-tree-dag-node (1.07-1 -> 1.11-1)
    [2013-06-05 13:11] [PACMAN] upgraded perl-xml-parser (2.41-3 -> 2.41-4)
    [2013-06-05 13:11] [PACMAN] upgraded perl-yaml-syck (1.22-1 -> 1.27-1)
    [2013-06-05 13:11] [PACMAN] upgraded poppler-glib (0.22.2-1 -> 0.22.4-1)
    [2013-06-05 13:11] [PACMAN] upgraded poppler-qt (0.22.2-1 -> 0.22.4-1)
    [2013-06-05 13:11] [PACMAN] upgraded pptpclient (1.7.2-4 -> 1.7.2-5)
    [2013-06-05 13:11] [PACMAN] upgraded protobuf (2.5.0-1 -> 2.5.0-3)
    [2013-06-05 13:11] [PACMAN] upgraded rtkit (0.11-1 -> 0.11-2)
    [2013-06-05 13:11] [PACMAN] upgraded sbc (1.0-1 -> 1.1-1)
    [2013-06-05 13:11] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
    [2013-06-05 13:11] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
    [2013-06-05 13:11] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
    [2013-06-05 13:11] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
    [2013-06-05 13:11] [ALPM-SCRIPTLET]
    [2013-06-05 13:11] [ALPM-SCRIPTLET] >>> Autospawn is now disabled by default. If you need to run PulseAudio outside
    [2013-06-05 13:11] [ALPM-SCRIPTLET] of an X session, either:
    [2013-06-05 13:11] [ALPM-SCRIPTLET] - Enable autospawn in client.conf, or
    [2013-06-05 13:11] [ALPM-SCRIPTLET] - Start it manually by executing 'pulseaudio --start'
    [2013-06-05 13:11] [PACMAN] upgraded pulseaudio (3.0-2 -> 3.0-3)
    [2013-06-05 13:11] [PACMAN] upgraded python2-zope-interface (4.0.3-1 -> 4.0.5-1)
    [2013-06-05 13:11] [PACMAN] upgraded reiserfsprogs (3.6.22-1 -> 3.6.22-2)
    [2013-06-05 13:11] [PACMAN] upgraded rfkill (0.4-7 -> 0.5-1)
    [2013-06-05 13:11] [PACMAN] upgraded rsync (3.0.9-5 -> 3.0.9-6)
    [2013-06-05 13:11] [PACMAN] upgraded rxvt-unicode (9.18-1 -> 9.18-5)
    [2013-06-05 13:11] [PACMAN] upgraded sdl_image (1.2.12-2 -> 1.2.12-3)
    [2013-06-05 13:11] [PACMAN] upgraded seahorse (3.6.3-1 -> 3.8.2-1)
    [2013-06-05 13:11] [PACMAN] upgraded skype (4.1.0.20-6 -> 4.2.0.11-1)
    [2013-06-05 13:11] [PACMAN] upgraded slim (1.3.5-2 -> 1.3.5-3)
    [2013-06-05 13:11] [PACMAN] upgraded subversion (1.7.8-1 -> 1.7.9-6)
    [2013-06-05 13:11] [PACMAN] upgraded sudo (1.8.6.p7-2 -> 1.8.6.p8-2)
    [2013-06-05 13:11] [PACMAN] upgraded sysvinit-tools (2.88-9 -> 2.88-11)
    [2013-06-05 13:11] [PACMAN] upgraded systemd-sysvcompat (198-2 -> 204-3)
    [2013-06-05 13:11] [PACMAN] upgraded terminator (0.96-4 -> 0.97-1)
    [2013-06-05 13:11] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:11] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:12] [ALPM-SCRIPTLET] recreating all formats... done.
    [2013-06-05 13:12] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-06-05 13:12] [PACMAN] upgraded texlive-bin (2012.0-8 -> 2012.0-12)
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.BkYRWYLQwd...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-06-05 13:13] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: recreating all formats...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:13] [ALPM-SCRIPTLET] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
    [2013-06-05 13:13] [ALPM-SCRIPTLET] NB: To setup ConTeXt and the lua(la)tex font db,
    [2013-06-05 13:13] [ALPM-SCRIPTLET] see http://wiki.archlinux.org/index.php/TeX_Live
    [2013-06-05 13:13] [PACMAN] upgraded texlive-core (2012.28273-1 -> 2012.29661-1)
    [2013-06-05 13:13] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:13] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:13] [PACMAN] upgraded texlive-bibtexextra (2012.28244-1 -> 2012.29663-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.PCRnjpu2LX...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-fontsextra (2012.28268-1 -> 2012.29646-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-formatsextra (2012.26689-1 -> 2012.29110-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.wUzwlpN7S4...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-games (2012.28243-1 -> 2012.29679-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-genericextra (2012.28210-1 -> 2012.29501-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-htmlxml (2012.28273-1 -> 2012.29474-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving updmap.cfg as /tmp/tmp.OUUwjPH5PT...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: regenerating updmap.cfg (custom additions should go
    [2013-06-05 13:14] [ALPM-SCRIPTLET] into /etc/texmf/web2c/updmap-local.cfg
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the fontmap files with updmap...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-latexextra (2012.28272-1 -> 2012.29701-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: updating the filename database...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /etc/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Updating /var/lib/texmf/ls-R...
    [2013-06-05 13:14] [ALPM-SCRIPTLET] mktexlsr: Done.
    [2013-06-05 13:14] [PACMAN] upgraded texlive-humanities (2012.28280-1 -> 2012.29347-1)
    [2013-06-05 13:14] [ALPM-SCRIPTLET] >>> texlive: saving u

    It has solved itself today. After making a -Syu today and installing a newer kernel then reinstalling catalyst-dkms from AUR it is working again!! )))) Marking as solved.
    Kernel: 3.9.5-1-ARCH
    Catalyst-dkms: 13.1-2 (instead of newest 13.4-1)
    Last edited by szebenyib (2013-06-14 12:02:42)

  • [solved] openvpn connection no longer working, tls error

    Hey!
    I have a strange problem. The same setup was working for months, nothing changed. Perhaps it`s due to an update and you guys can help me. I can`t establish a vpn connection to our openvpn server any more.
    I`m using tunnelblick as vpn client to connect from my mac to the office. It hangs at "waiting for response from server". I`m not an expert, but as I understand the tls handshake fails. I googled around and tried everything suggested, but no success.
    I haven`t used it since the latest openvpn package update, perhaps it has something to do with that?
    I found this, too, but it didn`t help either:
    http://openvpn.net/index.php/open-sourc … ivity.html
    This is the client log:
    2013-02-16 11:17:06 MANAGEMENT: >STATE:1361009826,WAIT,,,
    2013-02-16 11:18:06 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
    2013-02-16 11:18:06 TLS Error: TLS handshake failed
    2013-02-16 11:18:06 TCP/UDP: Closing socket
    2013-02-16 11:18:06 SIGUSR1[soft,tls-error] received, process restarting
    2013-02-16 11:18:06 MANAGEMENT: >STATE:1361009886,RECONNECTING,tls-error,,
    2013-02-16 11:18:06 MANAGEMENT: CMD 'hold release'
    and this is the server log (verbose 5):
    Sat Feb 16 11:38:08 2013 us=118721 NOTE: OpenVPN 2.1 requires '--script-security 2' or higher to call user-defined scripts or executables
    Sat Feb 16 11:38:08 2013 us=133716 Diffie-Hellman initialized with 2048 bit key
    Sat Feb 16 11:38:08 2013 us=134619 Control Channel Authentication: using '/etc/openvpn/keys/ta.key' as a OpenVPN static key file
    Sat Feb 16 11:38:08 2013 us=134677 Outgoing Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
    Sat Feb 16 11:38:08 2013 us=134707 Incoming Control Channel Authentication: Using 160 bit message hash 'SHA1' for HMAC authentication
    Sat Feb 16 11:38:08 2013 us=134745 TLS-Auth MTU parms [ L:1590 D:166 EF:66 EB:0 ET:0 EL:0 ]
    Sat Feb 16 11:38:08 2013 us=134808 Socket Buffers: R=[212992->131072] S=[212992->131072]
    Sat Feb 16 11:38:08 2013 us=135268 TUN/TAP device tap0 opened
    Sat Feb 16 11:38:08 2013 us=135370 TUN/TAP TX queue length set to 100
    Sat Feb 16 11:38:08 2013 us=135572 Data Channel MTU parms [ L:1590 D:1450 EF:58 EB:135 ET:32 EL:0 AF:3/1 ]
    Sat Feb 16 11:38:08 2013 us=137116 UDPv4 link local (bound): [undef]
    Sat Feb 16 11:38:08 2013 us=137832 UDPv4 link remote: [undef]
    Sat Feb 16 11:38:08 2013 us=137870 MULTI: multi_init called, r=256 v=256
    Sat Feb 16 11:38:08 2013 us=138013 IFCONFIG POOL: base=192.168.1.220 size=10, ipv6=0
    Sat Feb 16 11:38:08 2013 us=138087 Initialization Sequence Completed
    Sat Feb 16 11:38:22 2013 us=273924 MULTI: multi_create_instance called
    Sat Feb 16 11:38:22 2013 us=274097 192.168.1.4:1194 Re-using SSL/TLS context
    Sat Feb 16 11:38:22 2013 us=274189 192.168.1.4:1194 LZO compression initialized
    Sat Feb 16 11:38:22 2013 us=274539 192.168.1.4:1194 Control Channel MTU parms [ L:1590 D:166 EF:66 EB:0 ET:0 EL:0 ]
    Sat Feb 16 11:38:22 2013 us=274643 192.168.1.4:1194 Data Channel MTU parms [ L:1590 D:1450 EF:58 EB:135 ET:32 EL:0 AF:3/1 ]
    Sat Feb 16 11:38:22 2013 us=274701 192.168.1.4:1194 Local Options String: 'V4,dev-type tap,link-mtu 1590,tun-mtu 1532,proto UDPv4,comp-lzo,keydir 0,cipher AES-128-CBC,auth SHA1,keysize 128,tls-auth,key-method 2,tls-server'
    Sat Feb 16 11:38:22 2013 us=274717 192.168.1.4:1194 Expected Remote Options String: 'V4,dev-type tap,link-mtu 1590,tun-mtu 1532,proto UDPv4,comp-lzo,keydir 1,cipher AES-128-CBC,auth SHA1,keysize 128,tls-auth,key-method 2,tls-client'
    Sat Feb 16 11:38:22 2013 us=274745 192.168.1.4:1194 Local Options hash (VER=V4): 'c5677ab3'
    Sat Feb 16 11:38:22 2013 us=274765 192.168.1.4:1194 Expected Remote Options hash (VER=V4): 'a7133b47'
    RSat Feb 16 11:38:22 2013 us=275000 192.168.1.4:1194 TLS: Initial packet from [AF_INET]192.168.1.4:1194 (via [AF_INET]192.168.1.205%br0), sid=e46fc8e5 4b4327b5
    WSat Feb 16 11:38:22 2013 us=275121 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
    RWSat Feb 16 11:38:24 2013 us=597178 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
    RWSat Feb 16 11:38:28 2013 us=80376 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
    RWSat Feb 16 11:38:36 2013 us=360017 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
    WSat Feb 16 11:38:52 2013 us=266108 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
    RWSat Feb 16 11:38:52 2013 us=284681 192.168.1.4:1194 write UDPv4: Invalid argument (code=22)
    RSat Feb 16 11:39:22 2013 us=604136 192.168.1.4:1194 TLS: new session incoming connection from [AF_INET]192.168.1.4:1194 (via [AF_INET]192.168.1.205%br0)
    Sat Feb 16 11:39:22 2013 us=604198 192.168.1.4:1194 TLS Error: TLS key negotiation failed to occur within 60 seconds (check your network connectivity)
    Sat Feb 16 11:39:22 2013 us=604219 192.168.1.4:1194 TLS Error: TLS handshake failed
    This is the server config. It`s located in /etc/openvpn/openvpn_server.conf and the server starts fine with systemctl start openvpn@openvpn_server.service.
    mode server
    dev tap0
    multihome
    server-bridge 192.168.1.205 255.255.255.0 192.168.1.220 192.168.1.229
    client-to-client
    proto udp
    port 1194
    comp-lzo
    persist-tun
    persist-key
    keepalive 10 120
    ca /etc/openvpn/keys/ca.crt
    dh /etc/openvpn/keys/dh2048.pem
    cert /etc/openvpn/keys/archvpn.crt
    key /etc/openvpn/keys/archvpn.key
    tls-auth /etc/openvpn/keys/ta.key 0
    tls-server
    verb 3
    cipher AES-128-CBC
    log /etc/openvpn/openvpn.log
    This is the client config:
    client
    remote myserver.dyndns.org 1194
    dev tap0
    proto udp
    port 1194
    comp-lzo
    ca ca.crt
    cert tom.crt
    key tom.key
    persist-tun
    persist-key
    resolv-retry infinite
    keepalive 10 120
    tls-auth ta.key 1
    tls-client
    ns-cert-type server
    verb 3
    cipher AES-128-CBC
    float
    What I checked and tried so far:
    0    did a lot of reading
    1    modules are loaded in /etc/modules-load.d/openvpn.conf
    tun
    bridge
    2 netcfg config starts tap and network config
    /etc/conf.d/netcfg
    NETWORKS=(openvpn_tap office_lan_openvpn)
    /etc/network.d/openvpn_tap
    INTERFACE='tap0'
    CONNECTION='tuntap'
    MODE='tap'
    USER='nobody'
    GROUP='nobody'
    /etc/network.d/office_lan_openvpn
    INTERFACE="br0"
    CONNECTION="bridge"
    DESCRIPTION="Ethernet/OpenVPN bridge"
    BRIDGE_INTERFACES="eth0 tap0"
    IP="static"
    ADDR="192.168.1.205"
    GATEWAY="192.168.2.1"
    DNS=("192.168.1.1")
    3    checked firewall port, even disabled iptables
    4    port forwarding in fritzbox is active
    5    all other connections from outside are working (http, ftp)
    6    certificates and keys should be fine, they were working in the past with the same setup
    Hope someone can help me, I really need my connection back… If anything else is needed just let me know.
    Last edited by archtom (2013-02-16 16:08:21)

    I solved it
    I did more reading and it seemed to be a problem in the config files, anything else could be pretty much excluded.
    I started with fresh config files referring to the german wiki (it`s different) from .org. Since it was working with this I started to track the problem down. In the end I had to delete the
    multihome
    option in the server config. Everything seems fine now! Thanks for everyone that read it. Perhaps it helps someone in the future.

  • [SOLVED] udev rule no longer working

    I have a udev rule set up to automatically mount an ext4 filesystem when I plug a certain thumb drive in.  It was working fine until yesterday (probably due to updates).  Here is the rule, in file /etc/udev/rules.d/99-gfk.rules:
    KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", SYMLINK+="gfshare"
    ACTION=="add", KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", RUN+="/bin/mkdir /media/gfshare"
    ACTION=="add", KERNEL=="sd?2", SUBSYSTEM=="block", ATTRS{idVendor}=="0930", ATTRS{idProduct}=="6545", ATTRS{serial}=="1C6F654E4041ED601910053F", RUN+="/bin/mount -t ext4 -o ro,nosuid,nodev,noexec,noatime /dev/gfshare /media/gfshare"
    The symlink and the mkdir command are both working fine, but the mount command is not being run for some reason.  If I manually run the mount command it works fine.  Some possibly helpful output:
    # pacman -Qo $(which udevadm)
    /usr/bin/udevadm is owned by systemd 212-1
    # dmesg |tail -16
    [26458.120628] usb 7-1.3: new high-speed USB device number 7 using ehci-pci
    [26458.223059] usb-storage 7-1.3:1.0: USB Mass Storage device detected
    [26458.223825] scsi10 : usb-storage 7-1.3:1.0
    [26459.311607] scsi 10:0:0:0: Direct-Access Kingston DataTraveler 2.0 PMAP PQ: 0 ANSI: 4
    [26460.834081] sd 10:0:0:0: [sdd] 15240576 512-byte logical blocks: (7.80 GB/7.26 GiB)
    [26460.834931] sd 10:0:0:0: [sdd] Write Protect is off
    [26460.834935] sd 10:0:0:0: [sdd] Mode Sense: 23 00 00 00
    [26460.835617] sd 10:0:0:0: [sdd] No Caching mode page found
    [26460.835621] sd 10:0:0:0: [sdd] Assuming drive cache: write through
    [26460.839455] sd 10:0:0:0: [sdd] No Caching mode page found
    [26460.839460] sd 10:0:0:0: [sdd] Assuming drive cache: write through
    [26460.860579] sdd: sdd1 sdd2
    [26460.867111] sd 10:0:0:0: [sdd] No Caching mode page found
    [26460.867115] sd 10:0:0:0: [sdd] Assuming drive cache: write through
    [26460.867118] sd 10:0:0:0: [sdd] Attached SCSI removable disk
    [26461.041982] EXT4-fs (sdd2): mounted filesystem with ordered data mode. Opts: (null)
    # udevadm test /sys/bus/usb/devices/7-1.3
    calling: test
    version 212
    This program is for debugging only, it does not run any program
    specified by a RUN key. It may show incorrect results, because
    some values may be different, or not available at a simulation run.
    load module index
    timestamp of '/etc/systemd/network' changed
    timestamp of '/usr/lib/systemd/network' changed
    Parsed configuration file /usr/lib/systemd/network/99-default.link
    Created link configuration context
    timestamp of '/etc/udev/rules.d' changed
    Skipping overridden file: /usr/lib/udev/rules.d/80-net-setup-link.rules.
    read rules file: /usr/lib/udev/rules.d/10-dm.rules
    read rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
    read rules file: /etc/udev/rules.d/12-android.rules
    read rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
    read rules file: /usr/lib/udev/rules.d/40-hpet-permissions.rules
    read rules file: /usr/lib/udev/rules.d/40-usb-media-players.rules
    read rules file: /usr/lib/udev/rules.d/42-usb-hid-pm.rules
    read rules file: /usr/lib/udev/rules.d/50-firmware.rules
    read rules file: /usr/lib/udev/rules.d/50-udev-default.rules
    read rules file: /usr/lib/udev/rules.d/51-android.rules
    read rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
    read rules file: /usr/lib/udev/rules.d/60-drm.rules
    read rules file: /usr/lib/udev/rules.d/60-keyboard.rules
    read rules file: /usr/lib/udev/rules.d/60-pcmcia.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-serial.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
    read rules file: /usr/lib/udev/rules.d/60-vboxdrv.rules
    read rules file: /usr/lib/udev/rules.d/61-accelerometer.rules
    read rules file: /usr/lib/udev/rules.d/63-md-raid-arrays.rules
    read rules file: /usr/lib/udev/rules.d/64-btrfs.rules
    read rules file: /usr/lib/udev/rules.d/64-md-raid-assembly.rules
    read rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
    read rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
    read rules file: /usr/lib/udev/rules.d/69-libmtp.rules
    read rules file: /usr/lib/udev/rules.d/70-infrared.rules
    read rules file: /usr/lib/udev/rules.d/70-power-switch.rules
    read rules file: /usr/lib/udev/rules.d/70-uaccess.rules
    read rules file: /usr/lib/udev/rules.d/71-seat.rules
    read rules file: /usr/lib/udev/rules.d/73-seat-late.rules
    read rules file: /usr/lib/udev/rules.d/75-net-description.rules
    read rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
    read rules file: /usr/lib/udev/rules.d/75-tty-description.rules
    read rules file: /usr/lib/udev/rules.d/78-sound-card.rules
    read rules file: /usr/lib/udev/rules.d/80-drivers.rules
    read rules file: /etc/udev/rules.d/80-net-setup-link.rules
    read rules file: /usr/lib/udev/rules.d/80-udisks.rules
    read rules file: /usr/lib/udev/rules.d/80-udisks2.rules
    read rules file: /usr/lib/udev/rules.d/85-usbmuxd.rules
    read rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
    read rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
    read rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
    read rules file: /usr/lib/udev/rules.d/95-udev-late.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-csr.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
    read rules file: /etc/udev/rules.d/99-gfk.rules
    read rules file: /usr/lib/udev/rules.d/99-systemd.rules
    read rules file: /usr/lib/udev/rules.d/kino.rules
    rules contain 98304 bytes tokens (8192 * 12 bytes), 22360 bytes strings
    10092 strings (88570 bytes), 8317 de-duplicated (67986 bytes), 1776 trie nodes used
    IMPORT builtin 'usb_id' /usr/lib/udev/rules.d/50-udev-default.rules:9
    IMPORT builtin 'hwdb' /usr/lib/udev/rules.d/50-udev-default.rules:9
    MODE 0664 /usr/lib/udev/rules.d/50-udev-default.rules:37
    GROUP 1002 /usr/lib/udev/rules.d/51-android.rules:387
    MODE 0660 /usr/lib/udev/rules.d/51-android.rules:387
    RUN '/usr/share/virtualbox/VBoxCreateUSBNode.sh $major $minor $attr{bDeviceClass} vboxusers' /usr/lib/udev/rules.d/60-vboxdrv.rules:6
    PROGRAM '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7' /usr/lib/udev/rules.d/69-libmtp.rules:1204
    starting '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7'
    '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7'(out) '0'
    '/usr/lib/udev/mtp-probe /sys/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3 7 7' [24644] exit with return code 0
    IMPORT builtin 'path_id' /usr/lib/udev/rules.d/71-seat.rules:43
    RUN 'uaccess' /usr/lib/udev/rules.d/73-seat-late.rules:15
    handling device node '/dev/bus/usb/007/007', devnum=c189:774, mode=0660, uid=0, gid=1002
    preserve permissions /dev/bus/usb/007/007, 020660, uid=0, gid=1002
    preserve already existing symlink '/dev/char/189:774' to '../bus/usb/007/007'
    ACTION=add
    BUSNUM=007
    DEVNAME=/dev/bus/usb/007/007
    DEVNUM=007
    DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3
    DEVTYPE=usb_device
    DRIVER=usb
    ID_BUS=usb
    ID_DRIVE_THUMB=1
    ID_FOR_SEAT=usb-pci-0000_00_1a_7-usb-0_1_3
    ID_MODEL=DataTraveler_2.0
    ID_MODEL_ENC=DataTraveler\x202.0
    ID_MODEL_FROM_DATABASE=Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
    ID_MODEL_ID=6545
    ID_PATH=pci-0000:00:1a.7-usb-0:1.3
    ID_PATH_TAG=pci-0000_00_1a_7-usb-0_1_3
    ID_REVISION=0100
    ID_SERIAL=Kingston_DataTraveler_2.0_1C6F654E4041ED601910053F
    ID_SERIAL_SHORT=1C6F654E4041ED601910053F
    ID_USB_INTERFACES=:080650:
    ID_VENDOR=Kingston
    ID_VENDOR_ENC=Kingston
    ID_VENDOR_FROM_DATABASE=Toshiba Corp.
    ID_VENDOR_ID=0930
    MAJOR=189
    MINOR=774
    PRODUCT=930/6545/100
    SUBSYSTEM=usb
    TAGS=:seat:uaccess:
    TYPE=0/0/0
    USEC_INITIALIZED=26452326568
    adb_user=yes
    run: '/usr/share/virtualbox/VBoxCreateUSBNode.sh 189 774 00 vboxusers'
    run: 'uaccess'
    unload module index
    Unloaded link configuration context
    # udevadm test /sys/bus/usb/devices/7-1.3:1.0
    calling: test
    version 212
    This program is for debugging only, it does not run any program
    specified by a RUN key. It may show incorrect results, because
    some values may be different, or not available at a simulation run.
    load module index
    timestamp of '/etc/systemd/network' changed
    timestamp of '/usr/lib/systemd/network' changed
    Parsed configuration file /usr/lib/systemd/network/99-default.link
    Created link configuration context
    timestamp of '/etc/udev/rules.d' changed
    Skipping overridden file: /usr/lib/udev/rules.d/80-net-setup-link.rules.
    read rules file: /usr/lib/udev/rules.d/10-dm.rules
    read rules file: /usr/lib/udev/rules.d/11-dm-lvm.rules
    read rules file: /etc/udev/rules.d/12-android.rules
    read rules file: /usr/lib/udev/rules.d/13-dm-disk.rules
    read rules file: /usr/lib/udev/rules.d/40-hpet-permissions.rules
    read rules file: /usr/lib/udev/rules.d/40-usb-media-players.rules
    read rules file: /usr/lib/udev/rules.d/42-usb-hid-pm.rules
    read rules file: /usr/lib/udev/rules.d/50-firmware.rules
    read rules file: /usr/lib/udev/rules.d/50-udev-default.rules
    read rules file: /usr/lib/udev/rules.d/51-android.rules
    read rules file: /usr/lib/udev/rules.d/60-cdrom_id.rules
    read rules file: /usr/lib/udev/rules.d/60-drm.rules
    read rules file: /usr/lib/udev/rules.d/60-keyboard.rules
    read rules file: /usr/lib/udev/rules.d/60-pcmcia.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-alsa.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-input.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-serial.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-storage-tape.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-storage.rules
    read rules file: /usr/lib/udev/rules.d/60-persistent-v4l.rules
    read rules file: /usr/lib/udev/rules.d/60-vboxdrv.rules
    read rules file: /usr/lib/udev/rules.d/61-accelerometer.rules
    read rules file: /usr/lib/udev/rules.d/63-md-raid-arrays.rules
    read rules file: /usr/lib/udev/rules.d/64-btrfs.rules
    read rules file: /usr/lib/udev/rules.d/64-md-raid-assembly.rules
    read rules file: /usr/lib/udev/rules.d/69-cd-sensors.rules
    read rules file: /usr/lib/udev/rules.d/69-dm-lvm-metad.rules
    read rules file: /usr/lib/udev/rules.d/69-libmtp.rules
    read rules file: /usr/lib/udev/rules.d/70-infrared.rules
    read rules file: /usr/lib/udev/rules.d/70-power-switch.rules
    read rules file: /usr/lib/udev/rules.d/70-uaccess.rules
    read rules file: /usr/lib/udev/rules.d/71-seat.rules
    read rules file: /usr/lib/udev/rules.d/73-seat-late.rules
    read rules file: /usr/lib/udev/rules.d/75-net-description.rules
    read rules file: /usr/lib/udev/rules.d/75-probe_mtd.rules
    read rules file: /usr/lib/udev/rules.d/75-tty-description.rules
    read rules file: /usr/lib/udev/rules.d/78-sound-card.rules
    read rules file: /usr/lib/udev/rules.d/80-drivers.rules
    read rules file: /etc/udev/rules.d/80-net-setup-link.rules
    read rules file: /usr/lib/udev/rules.d/80-udisks.rules
    read rules file: /usr/lib/udev/rules.d/80-udisks2.rules
    read rules file: /usr/lib/udev/rules.d/85-usbmuxd.rules
    read rules file: /usr/lib/udev/rules.d/90-alsa-restore.rules
    read rules file: /usr/lib/udev/rules.d/95-cd-devices.rules
    read rules file: /usr/lib/udev/rules.d/95-dm-notify.rules
    read rules file: /usr/lib/udev/rules.d/95-udev-late.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-dell.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-fujitsu.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-gateway.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-ibm.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-lenovo.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-battery-recall-toshiba.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-csr.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-hid.rules
    read rules file: /usr/lib/udev/rules.d/95-upower-wup.rules
    read rules file: /etc/udev/rules.d/99-gfk.rules
    read rules file: /usr/lib/udev/rules.d/99-systemd.rules
    read rules file: /usr/lib/udev/rules.d/kino.rules
    rules contain 98304 bytes tokens (8192 * 12 bytes), 22360 bytes strings
    10092 strings (88570 bytes), 8317 de-duplicated (67986 bytes), 1776 trie nodes used
    IMPORT builtin 'hwdb' /usr/lib/udev/rules.d/50-udev-default.rules:11
    RUN 'kmod load $env{MODALIAS}' /usr/lib/udev/rules.d/80-drivers.rules:5
    ACTION=add
    DEVPATH=/devices/pci0000:00/0000:00:1a.7/usb7/7-1/7-1.3/7-1.3:1.0
    DEVTYPE=usb_interface
    DRIVER=usb-storage
    ID_MODEL_FROM_DATABASE=Kingston DataTraveler 102 Flash Drive / HEMA Flash Drive 2 GB / PNY Attache 4GB Stick
    ID_VENDOR_FROM_DATABASE=Toshiba Corp.
    INTERFACE=8/6/80
    MODALIAS=usb:v0930p6545d0100dc00dsc00dp00ic08isc06ip50in00
    PRODUCT=930/6545/100
    SUBSYSTEM=usb
    TYPE=0/0/0
    USEC_INITIALIZED=452326811
    run: 'kmod load usb:v0930p6545d0100dc00dsc00dp00ic08isc06ip50in00'
    unload module index
    Unloaded link configuration context
    Last edited by bentglasstube (2014-04-03 20:51:36)

    I see.  That is somewhat aggravating but I will find another way to achieve what I wanted I suppose.
    Thank you.  Should I mark this is solved or unsolvable or something?  Sorry, I'm new to posting on these forums.
    Edit:  I was able to achieve what I wanted with udevil as recommended by the wiki.
    Last edited by bentglasstube (2014-04-03 20:55:45)

  • [SOLVED] Wireless auto-connect not working

    Hi!
    I'm really new to Linux in general, so I've spent a few hours trying to figure this out (searching the forums, etc) but haven't had any success.
    When I first installed Arch, everything seemed to work fine. It would automatically connect to my home wireless (after enabling net-auto-wireless in sytemctl). I went to a local library, and connected to their wifi. After rebooting at the library I noticed that it didn't connect automatically to the library network. I wasn't sure if I had done something wrong or if I had just failed to set something up... but then it also would not automatically connect at home now.
    I have to use wifi-menu every time I reboot. I ran systemctl and saw this:
    systemctl failed list:
    UNIT LOAD ACTIVE SUB DESCRIPTION
    net-auto-wireless.service loaded failed failed Provides automatic netcfg wireless connection
    netcfg.service loaded failed failed Netcfg multi-profile daemon
    LOAD = Reflects whether the unit definition was properly loaded.
    ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
    SUB = The low-level unit activation state, values depend on unit type.
    2 loaded units listed. Pass --all to see loaded but inactive units, too.
    To show all installed unit files use 'systemctl list-unit-files'.
    netcfg status:
    netcfg.service - Netcfg multi-profile daemon
    Loaded: loaded (/usr/lib/systemd/system/netcfg.service; enabled)
    Active: failed (Result: exit-code) since Sat 2013-02-09 17:33:33 EST; 4min 53s ago
    Process: 253 ExecStart=/usr/bin/netcfg-daemon start (code=exited, status=1/FAILURE)
    Feb 09 17:33:33 arch netcfg-daemon[253]: No recorded netcfg state to restore
    net-auto-wireless status:
    net-auto-wireless.service - Provides automatic netcfg wireless connection
    Loaded: loaded (/usr/lib/systemd/system/net-auto-wireless.service; enabled)
    Active: failed (Result: exit-code) since Sat 2013-02-09 17:33:34 EST; 4min 56s ago
    Process: 252 ExecStart=/usr/bin/netcfg-wpa_actiond $WIRELESS_INTERFACE (code=exited, status=1/FAILURE)
    Feb 09 17:33:33 arch netcfg-wpa_actiond[252]: wlan0-
    Feb 09 17:33:33 arch netcfg-wpa_actiond[252]: wlan0-BELL369
    Feb 09 17:33:33 arch netcfg-wpa_actiond[252]: Successfully initialized wpa_supplicant
    Feb 09 17:33:33 arch netcfg-wpa_actiond[252]: Line 11: Invalid passphrase length 0 (expected: 8..63) '"'.
    Feb 09 17:33:33 arch netcfg-wpa_actiond[252]: Line 11: failed to parse psk '""'.
    Feb 09 17:33:33 arch netcfg-wpa_actiond[252]: Line 13: failed to parse network block.
    Feb 09 17:33:33 arch netcfg-wpa_actiond[252]: Failed to read or parse configuration '/run/network/wpa.wlan0/wpa.conf'.
    Feb 09 17:33:34 arch systemd[1]: net-auto-wireless.service: control process exited, code=exited status=1
    Feb 09 17:33:34 arch systemd[1]: Failed to start Provides automatic netcfg wireless connection.
    Feb 09 17:33:34 arch systemd[1]: Unit net-auto-wireless.service entered failed state
    Any idea what I might have done or what's happening? I hate feeling helpless, but I'm not sure what to look into to resolve my problem.
    Thanks!
    Last edited by trthatch (2013-02-10 02:09:41)

    bohoomil wrote:Seems like your config file(s) is corrupted somehow... Assuming you have a default netcfg profile to be loaded at system startup, what happens if you try and load it manually? Do you get similar error messages?
    Everything should be pretty standard. All I've done is follow instructions in the (complete) beginners guide.
    I haven't added any default profiles... so I'm not sure about my default profile. There's a "wlan0-" entry in addition to the library network and home network profiles... but it's empty.
    When I use
    netcfg wlan0-
    it says WPA Authentication/Association failed... but it's an empty profile so I wouldn't expect it to do anything.
    My local network is BELL369. When I used
    netcfg wlan0-BELL369
    it gave no errors and my wireless worked fine.
    If the configuration files are corrupted, how would I replace them?
    This is the contents of my netcfg conf file:
    # Enable these netcfg profiles at boot time.
    # - prefix an entry with a '@' to background its startup
    # - set to 'last' to restore the profiles running at the last shutdown
    # - set to 'menu' to present a menu (requires the dialog package)
    # Network profiles are found in /etc/network.d
    NETWORKS=(last)
    # Specify the name of your wired interface for net-auto-wired
    WIRED_INTERFACE="eth0"
    # Specify the name of your wireless interface for net-auto-wireless
    WIRELESS_INTERFACE="wlan0"
    # Array of profiles that may be started by net-auto-wireless.
    # When not specified, all wireless profiles are considered.
    #AUTO_PROFILES=("profile1" "profile2")

  • [SOLVED] pure-ftpd no longer works after system update

    Hi,
    I made a system update today and since pure-ftpd doesn't want to start it just display "[FAIL]" but I don't have any error message.
    Is it possible to see the the error log of pure-ftpd ?
    Do you have any idea of how getting it working again?
    Thanks
    Last edited by clems45 (2011-04-02 21:41:23)

    I tried to check the version of pure-ftpd: pure-ftpd -V and it replies:
    pure-ftpd: error while loading shared libraries: libmysqlclient.so.16: cannot open shared object file: No such file or directory
    but mysql client is installed properly! I tried to reinstall it but it changed nothing

  • [SOLVED] Suspend button no longer works after update

    Recently update my system, and now pressing the suspend button (Fn+F3 in my case) doesn't suspend it to ram as it did before.
    Running acpi_listen and hitting the button gives me the output "button/sleep SBTN 00000080 00000000 K" so clearly it's hearing it. Pressing the brightness buttons on the keyboard works (changes the brightness as expected), pressing the power button works to shut it down completely, closing the lid suspends it as expected... Just the suspend button stopped working.
    I saw a post about a different thing which mentioned systemd's config file "/etc/systemd/logind.conf" so I tried uncommenting the line in that file which tells systemd to handle the suspend button, but no luck, not even after rebooting to hopefully get it to source that file.
    Here is my ACPI folder's tree...
    ./events
    ./events/anything
    ./events/lm_battery
    ./events/lm_lid
    ./events/lm_ac_adapter
    ./handler.sh
    ./actions
    ./actions/lm_battery.sh
    ./actions/lm_lid.sh
    ./actions/lm_ac_adapter.sh
    It has everything it should have, i think. The handler script has a "case" for suspend button.
    Running "sudo pm-suspend" in a terminal suspends it, as does going into the XFCE shutdown menu and hitting suspend.
    I can't think of anything else to try. Also, I did look around for other posts, but wasn't able to find anything. If I missed something, I appologize for the double post.
    Thanks,
    --Scott
    EDIT: I swear I meant to put this in "laptop issues." This is embarrassing.
    Last edited by scott_fakename (2013-01-12 21:41:45)

    Sorry for not responding more punctually. handler.sh is as follows (the only modifications to it would have been things done by the system itself, as i haven't touched it)
    #!/bin/bash
    # Default acpi script that takes an entry for all actions
    case "$1" in
    button/power)
    case "$2" in
    PBTN|PWRF)
    logger 'PowerButton pressed'
    logger "ACPI action undefined: $2"
    esac
    button/sleep)
    case "$2" in
    SLPB|SBTN)
    logger 'SleepButton pressed'
    logger "ACPI action undefined: $2"
    esac
    ac_adapter)
    case "$2" in
    AC|ACAD|ADP0)
    case "$4" in
    00000000)
    logger 'AC unpluged'
    00000001)
    logger 'AC pluged'
    esac
    logger "ACPI action undefined: $2"
    esac
    battery)
    case "$2" in
    BAT0)
    case "$4" in
    00000000)
    logger 'Battery online'
    00000001)
    logger 'Battery offline'
    esac
    CPU0)
    *) logger "ACPI action undefined: $2" ;;
    esac
    button/lid)
    case "$3" in
    close)
    logger 'LID closed'
    open)
    logger 'LID opened'
    logger "ACPI action undefined: $3"
    esac
    logger "ACPI group/action undefined: $1 / $2"
    esac
    # vim:set ts=4 sw=4 ft=sh et:
    Also, here is logind.conf, which is back to its original state:
    # This file is part of systemd.
    # systemd is free software; you can redistribute it and/or modify it
    # under the terms of the GNU Lesser General Public License as published by
    # the Free Software Foundation; either version 2.1 of the License, or
    # (at your option) any later version.
    # See logind.conf(5) for details
    [Login]
    #NAutoVTs=6
    #ReserveVT=6
    #KillUserProcesses=no
    #KillOnlyUsers=
    #KillExcludeUsers=root
    #Controllers=
    #ResetControllers=cpu
    #InhibitDelayMaxSec=5
    #HandlePowerKey=poweroff
    #HandleSuspendKey=suspend
    #HandleHibernateKey=hibernate
    #HandleLidSwitch=suspend
    #PowerKeyIgnoreInhibited=no
    #SuspendKeyIgnoreInhibited=no
    #HibernateKeyIgnoreInhibited=no
    #LidSwitchIgnoreInhibited=yes
    The line that i uncommented (to no effect) was "HandleSuspendKey=suspend".
    I sort of have a workaround, inasmuch as I use XFCE and XFCE can handle the suspend key just fine, but the catch is that I have to have the DM up in order for it to do so, so it's not really a "solution" per se. Anyway. I don't know what else to try. The only other thing I could think of was to look in to laptop mode utils to see if others had had problems with it, but googling around yeilded nothing pertinent to this particular issue.

  • [SOLVED] vi (vim) no longer works properly after updating the system

    After updating the system with pacman -Syu vi stopped working. All syntax colors are gone, and everything is grey. When I press i to enter "insert" mode, editing is not visible. Changes are obscure and you can't tell what you are modifying.  Quitting with :q will still prompt you to use :q! to abort changes, even if no changes were visibly made.
    When scrolling to the beginning or end of a file, the screen flashes with grey glitch like areas.  What happened to my vi!?!?!?!?!?
    This all happened while following the beginner's guide to install arch linux.  I realized this when trying to arbitrarily read a test file I made directly after updating.
    The problems continued to be visible when installing and setting up sudo (those steps are the next steps that require vi)...  I think the sudo installation worked... but my vi is horribly glitchy
    Any ideas?
    Last edited by trusktr (2010-02-19 07:19:55)

    Setting EDITOR does not help in every case. For instance, visudo is by default hard linked to vi. (You can change this, I know. )
    But in fact, vi is only a symlink to ex. So I simply renamed this link and put another symlink to vim (vim-big in my case since I in fact do use the gvim package).
    /usr/bin/vi -> vim-big
    /usr/bin/vi-simple -> ex
    The drawback is that I have to set those links on every vi-update. (But I sure will remember...)
    Last edited by bernarcher (2010-02-19 00:58:57)

  • [solved] yaourt+customizepkg no longer work

    I set up customizepkg to patch a few packages before building them from source (see the original thread where I asked how to do it)
    It worked great initially, but yesterday I started seeing this error when trying to sync:
    $ yaourt -S gnome-applets
    ==> Building gnome-applets from sources
    gnome-applets was not found on abs repos.archlinux.org
    Any idea what's wrong? I swear it worked before I don't think I changed anything that could potentially affect yaourt or customizepkg
    The files in /etc/customizepkg.d/ are fine, I can successfully do this:
    ~$ mkdir test; cd test
    ~/test$ cp /var/abs/extra/gnome-applets/* .
    ~/test$ customizepkg -m
    ~/test$ makepkg
    ~/test$ sudo pacman -U gnome-applets-2.26.3-1-x86_64.pkg.tar.gz
    Thanks!
    Last edited by alexk (2009-09-05 02:58:10)

    tuxce wrote:yaourt use http://repos.archlinux.org/viewvc.cgi to search and download package files but url returns a 404 error.
    Thanks, it seems to work fine now that viewvc.cgi is back.

  • [SOLVED] broadcom-wl no longer works?

    Well I recently reformatted my laptop and have been stuck using ethernet ): Previous to the kernel update & reformat I was using the broadcom-wl driver from the AUR to interface with my BCM4328; however, now when I install it everything installs fine but I don't have a new interface... any ideas?
    Edit: Works fine, I lied. Be sure the ssb module isn't running when you try to install the package or else it won't create the new interface.
    Last edited by dr0p (2009-07-03 08:28:41)

    There was just another kernel update and now it works again, yay.

  • [SOLVED]Upgraded plexmediaserver no longer working

    I've been using plexmediaserver from the AUR. I installed the latest release which is now plex-media-server but it's not starting.  I'm still learning the ropes so have no idea where to being looking now..
    [root@hostname ~]# systemctl status plexmediaserver
    ● plexmediaserver.service - Plex Media Server
    Loaded: loaded (/usr/lib/systemd/system/plexmediaserver.service; enabled)
    Active: failed (Result: start-limit) since Fri 2014-11-28 09:26:59 GMT; 15s ago
    Process: 477 ExecStart=/usr/bin/plexmediaserver.sh (code=dumped, signal=ABRT)
    Main PID: 477 (code=dumped, signal=ABRT)
    Nov 28 09:26:53 hostname systemd[1]: Unit plexmediaserver.service entered failed state.
    Nov 28 09:26:53 hostname systemd[1]: plexmediaserver.service failed.
    Nov 28 09:26:59 hostname systemd[1]: plexmediaserver.service holdoff time over, scheduling restart.
    Nov 28 09:26:59 hostname systemd[1]: Stopping Plex Media Server...
    Nov 28 09:26:59 hostname systemd[1]: Starting Plex Media Server...
    Nov 28 09:26:59 hostname systemd[1]: start request repeated too quickly for plexmediaserver.service
    Nov 28 09:26:59 hostname systemd[1]: Failed to start Plex Media Server.
    Nov 28 09:26:59 hostname systemd[1]: Unit plexmediaserver.service entered failed state.
    Nov 28 09:26:59 hostname systemd[1]: plexmediaserver.service failed.
    https://aur.archlinux.org/packages/plex-media-server/
    *Edit*
    Nevermind, ended up removing and reinstalling.  Started straight away.  Sadly lost all my config so now having to redownload all my media meta data.
    Last edited by Swarfega (2014-11-28 11:10:39)

    I've been using plexmediaserver from the AUR. I installed the latest release which is now plex-media-server but it's not starting.  I'm still learning the ropes so have no idea where to being looking now..
    [root@hostname ~]# systemctl status plexmediaserver
    ● plexmediaserver.service - Plex Media Server
    Loaded: loaded (/usr/lib/systemd/system/plexmediaserver.service; enabled)
    Active: failed (Result: start-limit) since Fri 2014-11-28 09:26:59 GMT; 15s ago
    Process: 477 ExecStart=/usr/bin/plexmediaserver.sh (code=dumped, signal=ABRT)
    Main PID: 477 (code=dumped, signal=ABRT)
    Nov 28 09:26:53 hostname systemd[1]: Unit plexmediaserver.service entered failed state.
    Nov 28 09:26:53 hostname systemd[1]: plexmediaserver.service failed.
    Nov 28 09:26:59 hostname systemd[1]: plexmediaserver.service holdoff time over, scheduling restart.
    Nov 28 09:26:59 hostname systemd[1]: Stopping Plex Media Server...
    Nov 28 09:26:59 hostname systemd[1]: Starting Plex Media Server...
    Nov 28 09:26:59 hostname systemd[1]: start request repeated too quickly for plexmediaserver.service
    Nov 28 09:26:59 hostname systemd[1]: Failed to start Plex Media Server.
    Nov 28 09:26:59 hostname systemd[1]: Unit plexmediaserver.service entered failed state.
    Nov 28 09:26:59 hostname systemd[1]: plexmediaserver.service failed.
    https://aur.archlinux.org/packages/plex-media-server/
    *Edit*
    Nevermind, ended up removing and reinstalling.  Started straight away.  Sadly lost all my config so now having to redownload all my media meta data.
    Last edited by Swarfega (2014-11-28 11:10:39)

  • Netctl-auto stoped working [Solved]

    After update yesterday, netctl-auto stoped working. Netctl start MyProfile works OK.
    Something I have missed during update?
    Last edited by torors (2013-11-17 21:09:09)

    I think another version of netctl has been pushed to the repos.  Maybe you should try updating again and see if your issues are resolved by the updated package.
    pacman -Qi netctl
    Name : netctl
    Version : 1.4-2
    <snip>
    Build Date : Sun 17 Nov 2013 01:37:39 AM PST
    Install Date : Sun 17 Nov 2013 08:56:25 AM PST
    <snip>

Maybe you are looking for