[ SOLVED ] Network disappears after a few reboots

I have tried to install Arch twice and both times after rebooting it several times network connection disappears ( i.e., daemon starts ok, but no connection is preset ).
By looking at the error.log, it seems that dhcpcd fails to obtain requested IP address ( nothing specified in rc.conf ).
Is there anything I might be missing or it is a know problem ( saw the same question somewhere else ) ?
Last edited by MinimalBoot (2012-06-05 14:50:38)

glad you could make it work
could you please mark the thread as solved?
you could do so by editing the first post
regards

Similar Messages

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seco

My iPhone 4 with iOS 6 is making me start to hate Apple. Any App and at any time I open and I can not view it or move for more than 2 minutes, they close themselves. During connections, it also gives this problem and the signal disappears after a few seconds back but often the person on the other end has hung up ... I can not stand it anymore, someone suggests something?
Besides these problems, there is the battery, which was bad got worse, she is not lasting more than 10 hours, even without using the phone.
Sometimes it even seems that the problem was solved, but my joy did not last long after I celebrate all the problems return, is incredible ...
thanks.
Sorry my bad Inglês.

Try a reset hold home/sleep buttons until Apple logo appears
If that does not improve try a restore
http://support.apple.com/kb/HT4137
For your information
We are NOT Apple here we are all users helping other users
so emotion is ignored

Devices appear in itunes after loading then disappear after a few minutes. How do I rediscover my devices?

My devices all disappear after a few minutes. How do I rediscover them?

You may have a bad track pad sensor.
http://blog.w3conversions.com/2006/04/faulty-trackpad-sensor-in-powerbook/
Do NOT open the computer and detach the sensor. There’s no reason to. Here is the complete method for disabling the sensor:
Move (do not delete) the following extensions to a different location (a new folder outside the extensions folder). You’ll find them in your system/extensions folder:
* IOI2CControllerPMU.kext
* IOI2CLM7x.kext
* AppleLM7x.kext
* Extensions.kextcache
* Extensions.mkext
Once moved, restart, and that little sensor will be disabled.

Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!

Just downloaded OS X Lion. Now, there's no curser bar to scroll up or down for any of the pages I access....if I use the keyboard arrows for up/down, there is a temporary scroll bar, however it disappears after a few moments. Help!!

Go to System Preferences->General. There you can set how you wamt thescrool bars to behave.
If you want to see the scrool bars all the time select Always

After putting an entry into the calendar it disappears after a few seconds

Calendar entries disappear after a few second and do not sync between iPad and iPhone.

Hi,
Go to c: program files*86:common: adobe: sl cache, rename the sl cache
Go to c: program data: adobe: sl store: rename the sl store to old sl store.
Right click on premiere pro and run as admin.
Thank You
Arjun

Sound disappears after a few seconds of playing

Hello!
Sound from speaker disappears after a few seconds of playing on my x201i.
But in headphones all is ok.
OS: Win7.
I have performed all recomendations from "Troubleshooting audio issues - ThinkPad" but problem still exist.
Can anybody help me?
Thanks!

So here are some screen shots. The first one, I have my text block selected - you can see both fill and outline are set to "none". In the second one, I'm typing - you can see the text and the text is set to a white fill. In the 3rd one all iv'e done is stopped typing - the cursor is in the same place and the text disappears. It won't re-appear unless I click in it and make edits again, then 3 seconds after stopping, it will disappear again. I'm sure this is either a glitch, or a really simple thing that I'm missing because I'm new to InDesign. Thanks so much for your help. I really appreciate it.

Why are my notes disappearing after a few days?

I have an I-Phone 5, purchased last March. I have upgraded to IOS 7 when it first came out, no problem. I have been making lists of my packing boxes and they keep disappearing after a few days. I am wondering if sync is wiping them out. Anyone else having a problem with the notes feature?

Yahoo is holding Notes as hostage. Check your Yahoo account settings.

Rollover Sidelet disappears after a few seconds even when the mouse hasn't left the "hit area."

Rollover Sidelet disappears after a few seconds even when the mouse hasn't left the "hit area." There is enough text in the sidelet that the user cant read it all before it disappears on its own. Then they have to move their mouse off the hit area and back on it to see it for another 5 seconds. How do I fix this?

You should tell which version you are using. If you are on CP7 or earlier, look in the Properties panel of the slidelet, not the slidelet area (that is the rollover area, blue rectangle): change time in Timing accordion.
If you are on CP8, for the same object (slidelet) change its time in the Timing panel that is now no longer in the Properties panel.

FP1600 loses network connection after a few hours

My FP1600 loses its network connection after a few hours. It is part number 185690C-01, with firmware 4.11. I am running FieldPoint Explorer version 3.0.1 and LabView 6.1 from Windows XP Professional. I set it up, and everything runs fine for 4 hours or more. I do not have the network watchdog enabled, and the FP1600 is in constant communication with the host computer in any case. Sometime in the middle of the night the communication is lost. The FP1600 link light
is on, and it is still receiving packets, but it will not respond to a ping or any other communications. Only a power cycle brings it back. The FP1600 is sitting right next to the host computer, both attached to the same network switch. There is no interruptio
n of network services to the two.

Hi Heinz,
We are also trying to troubleshoot this same problem (Intermitten network connection loss with FP1600 Ethernet Module - Error code "33163", Error Message - "FP1600 Connection to module has been lost."). We have checked other possible causes for this sort of behaviour. Including independent assessment of netowork availability at the time of error reporting, connecting dedicated power supply to the FP1600 module, temperature of cabinet housing the module (which is between 10 and 50 deg C), disconnecting sensors connected to various I/O modules connected to this module, increasing duration of parameter "time out" (the time module will wait before reporting an error if it can not access network). However, none of the above resolved the intermittent and random network loss errors.
The MAX version is 3.0.2, and the firmware on the module is 4.17, Labview version is 7.0 and the Operating System is windows NT.
I was wondering is there any information about this problem from any user or NI recently. The only solution looking in to this discussion forum seems to be replacing the module.
MehulMessage Edited by MPatel on 02-28-2005 08:16 PM

Nokia n73 network disappears after sending a few c...

i am suffering from a unique problem on mine nokia n73 me
when ever i send continuous messages through the phone the network disappears and i have to restart my handset
it only happens when sending continuous messages it allows me to send a few messages without any problem
i am receiving calls and able to make call no network problem is there
what should i do....

this probably is a case of a bug in ur device so what u can try are:
U can go in for a hard reset which will turn ur device as it left the factory totally new and since u have no issue with the backup i think it wud probably do the trick
'*' '3' 'Call Key' and Power button all pressed at the same time after u have removed ur phone battery for at least 5 mins.
U can also update/reinstall ur firmware and see the result
In case of ur memory card there are different options available to you to get rid of the corrupt/unwanted data in your card.
menu--installations--application manager--remove the unwanted application....... in ur case internet tel
menu--tools--memory---options---format memory card......
remember everything including ur factory installed apps will be deleted......... but u can always download them later either from nokia or google them...
or insert ur card in any reader or laptop and check for virus and also the hidden folders....... check for any virus
the last option is to take it to ur care point and ask them to do the needful
Articles posted courtesy engadget
keep us updated about the progress.... if u like wat I have to offer then click on khudos.

AirPort Extreme disappears after a few hours

So I just got myself a new APExtreme. After a few hours of operations I have to power-cycle the device because 1) It disappears from the AirPort Utility and 2) As it does so it completely disconnects all of the itunes homesharing (and I believe all of the bonjour services disappear). Somehow these two events occur simultaneously. The rest of the network works fine (as a matter of fact the currents state is exactly this whilst I type this note). I have 5 laptops and 2 mac minis all experiencing this with the Extreme.
Any one experience something similar?

Open up a OS X terminal window and at the prompt, type:
ping <basestation IP address>
ie. ping 192.168.1.1
If you do this from the Windows boxes, the command is:
ping <basestation IP address> -t
It will output a ping to the router constantly and give you response rates...
What happens when it disconnects? Do the pings time out or do you get an error saying no route found to host?

I somehow set my toolbar to disappear after a few seconds, making the screen jump, very annoying, how do I set it back so it stays visible all of the time?

I can't remember where I found the option to make the toolbar invisible until I moved my cursor to where the toolbar usually shows. If I move the cursor again, after a few seconds the toolbar disappears causing the screen to jump up and fill in the space where it was. It is so irritating and I can't find out how to make it visible all of the time.

You can try to check the '''Options''' for the different '''Extensions''' in '''Tools''' ('''Alt''' + '''T''') > '''Add-ons'''. Starting Firefox temporarily in [https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode] may also help determine if an installed add-on is causing the change.

Acrobat 8 Disappears after a few seconds

Hi Guys
I do not use PDF's to the point I need to upgrade so having Acrobat 8 is good enough for me, but all of a sudden if disappeers after a few seocnds on opening.
I have lloked at uggestion via Google but none have helped.
If this si a known bug in 8 that adobe is aware of, is there not a fix for it, I need it to be simple as I am a simple person, not a techy...!
Kind regards to all
KM

What is your OS (Operating System) and update level?
Have you installed all of the Acrobat 8 updates?
All Adobe updates start here and select product, install in number order, updates are not cumulative http://www.adobe.com/downloads/updates/

WRT54G3G/Vodafone connect card - Network loss after a few hours or sometimes days

I have a Linksys WRT54G3G router with a vodafone mobile connectcard. I did setup the "keep alive" function to the nearest DNS servers to keep the modem alive 24/7. However after a few hours of somtimes after a few days. The modem "hangs" itselves. After a power-up of the modem it's start to work again. This modem is on a project location with no people available to reset the modem. At this moment we use a local timerswitch to reset (power off/on) the modem every 24 hour, but this is not really a solution. We're using the latest firmware. Please advise !

Re ; WRTG3G-ST Disconnect - I am running 2.00.9 firmware with a Sprint S720 card.
The Router disconnects from the Internet after a few minutes of operation.
I have set 'Auto Connect' to both auto (1000 min) and manual. and still get the disconnect.
Once it disconnects I cannot reconnect remotely even if I launch a browser or ping.
Pressing the Data Card button does reconnect to the Internet.
Some times it runs for hours.
My 3G signal in this area is not the geatest but I would expect the router to handle that.
Any suggestions on how to keep connected. .

Whenver i save any contact in iPhone 6 it disappears after a few hours. How to resolve this issue?

I have tried saving contacts in my brand new iPhone 6, but the contacts seems to diappear after a few hours. I tried shutting down my phone and even backing up contacts on iCloud but the problem ceases to exist. I have also tried saving the same contact several times on the device, but is vanishes again and again. It's getting on my nerves.
Can someone help me with that ?
-Desperate

Since the iPhone 4 and 4S are so mechanically similar, it might be a problem that can be fixed by the same fix I discovered for my iPhone 4S. I was having the exact same issue and, after researching it on the web, took my out-of-warranty iPhone to the Apple Store where it was repaired in 20 minutes at total cost of $6 (including tax). Apple has designed a shim that slips into the volume control assembly. I posted about it on my blog, here:
http://markshangout.com/blog/2013/8/22/iphone-4s-volume-adjusts-up-down-on-its-o wn.html
Mark

[ SOLVED ] Network disappears after a few reboots

Similar Messages

Maybe you are looking for