[Solved] Network interfaces change places after every reboot.

This has been bugging me for a while, it seems that in Arch every time the system reboots, the network interfaces are recognized in a random order.
So what was eth0 in the last reboot will be eth1 in this reboot, and sometimes it will remain for several reboots and then flip again.
This does not occur in Fedora on the same machine ever.., does any one know how to work around this problem?
Last edited by daf666 (2009-08-01 09:33:53)

fukawi2 wrote:Because we have no way of knowing what your network card drivers and/or MAC addresses are...?
I meant why is 75-persistent-net-generator.rules.optional optional? or why for example on Fedora this is never an issue?

Similar Messages

  • Sound Card changes after every reboot

    Alright, I've had this little issue since I installed Arch on one of my computers. After every reboot, the sound card changes and I have to manually edit my .asoundrc to get sound. It's not a huge deal but it is very annoying. How do I prevent my system from switching my sound card?
    This the output from aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: STX [Xonar STX], device 0: Multichannel [Multichannel]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: STX [Xonar STX], device 1: Digital [Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Intel [HDA Intel], device 1: ALC892 Digital [ALC892 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    I'm trying to keep the Xonar STX as the default card.

    thatnewyorker wrote:
    skunktrader wrote:
    On my machine I have the following in /etc/asound.conf
    pcm.!default {
    type hw
    card XFi
    ctl.!default {
    type hw
    card XFi
    Yeah that didn't work. I get a message about .asoundrc being old or corrupted so Alsamixer basically ignores it.
    I assume you changed the 'XFi' (my preferred sound card) to 'STX'

  • Prevent the Internet Security Suite from scanning after every reboot

    My Verizon Internet Security Suite is evidently set to scan everything after every reboot of the computer.  My computer is rather slow anyway.  But that ties up all the resources for about 15 minutes whenever I reboot the computer.  It keeps tabs on things in real time.  It's not necessary to scan after every reboot.  Can I turn that setting OFF?

    Hi Hermhart, Yes there should be an option to set that to off. try this link to see if this helps & let us know thanks Brett.
    http://www22.verizon.com/ResidentialHelp/FiOSInternet/General+Support/Essentials+And+Extras/Question...
    Brett
    Verizon Telecom
    Fiber Solution Center
    Notice: Content posted by Verizon employees is meant to be informational and does not supercede or change the Verizon Forums User Guidelines or Terms or Service, or your Customer Agreement Terms and Conditions or Plan.

  • "Application opened for the first time" warning after every reboot

    Hello, I have a problem with Lion 10.7.5. The system does not remember that I already opened applications before. After every reboot, every time I open an application it displays the warning as if it's the first time I'm opening it. Anyone knows how to solve this problem?
    Thanks in advance for your help.

    In my case, the problem disappeared after I installed the 10.7.5 supplemental update.

  • Server stucks at Applying Computer Settings after every reboot

    Hello!
    On one of our sites containing around 15 servers, whenever a terminal server is rebooted, it gets stuck on Applying Computer Settings for around 15 minutes. If it is un-joined from the domain then no issue. Moreover, once it is done with this delay, no time
    delay is observed in user login. But after every reboot, 15 - 20 mins delay is always observed. Domain is the same at other sites and no issue is being observed else where.
    OS: MS Windows Server 2008R2
    Help Required

    Hi,
    Thank you for posting in Windows Server forum.
    In addition, for a test please try to modify the behavior of HTTP.SYS to depend on another service being started first. To do this, perform the following steps: 
    1. Open Registry Editor
    2. Navigate to HKLM\SYSTEM\CurrentControlSet\Services\HTTP and create the following Multi-string value:
    DependOnService
    3.  Double click the new DependOnService entry
    4. Type CRYPTSVC in the Value Data field and click OK.
    5. Reboot the server
    NOTE: Please ensure that you make a backup of the registry / affected keys before making any changes to your system.
    More information.
    KB 2004121
    Hope it helps!
    Thanks.
    Dharmesh Solanki

  • Regular Kernel Panic after every Reboot

    If anyone understands all this please help me shed some light on this KP situation after every reboot...
    Thanks in advance!!!
    Dump as follows: -
    Interval Since Last Panic Report:  368538 sec
    Panics Since Last Report:          3
    Thu Mar 14 19:42:06 2013
    panic(cpu 0 caller 0xffffff8007ab7bd5): Kernel trap at 0xffffff8007b0fd84, type 14=page fault, registers:
    CR0: 0x000000008001003b, CR2: 0x00000000000000e0, CR3: 0x0000000009859001, CR4: 0x00000000000606e0
    RAX: 0xffffff8028d43808, RBX: 0x0000000000000000, RCX: 0x0000000000000000, RDX: 0x0000000000000002
    RSP: 0xffffff81f7753b20, RBP: 0xffffff81f7753b20, RSI: 0x0000000000000001, RDI: 0x0000000000000000
    R8:  0xffffff8007ee6f3f, R9:  0xffffff800b2cae90, R10: 0xffffff81d8b36000, R11: 0x0000000000000000
    R12: 0x0000000000000000, R13: 0xffffff8028f575d0, R14: 0xffffff8028d43808, R15: 0x0000000000000002
    RFL: 0x0000000000010246, RIP: 0xffffff8007b0fd84, CS:  0x0000000000000008, SS:  0x0000000000000010
    Fault CR2: 0x00000000000000e0, Error code: 0x0000000000000000, Fault CPU: 0x0
    Backtrace (CPU 0), Frame : Return Address
    0xffffff81f77537c0 : 0xffffff8007a1d626
    0xffffff81f7753830 : 0xffffff8007ab7bd5
    0xffffff81f7753a00 : 0xffffff8007ace4ed
    0xffffff81f7753a20 : 0xffffff8007b0fd84
    0xffffff81f7753b20 : 0xffffff8007d10152
    0xffffff81f7753b60 : 0xffffff8007d156d1
    0xffffff81f7753b90 : 0xffffff8007d15618
    0xffffff81f7753c00 : 0xffffff8007d189fc
    0xffffff81f7753c30 : 0xffffff8007b120af
    0xffffff81f7753c60 : 0xffffff8007af18d3
    0xffffff81f7753cb0 : 0xffffff8007af1021
    0xffffff81f7753cf0 : 0xffffff8007af151a
    0xffffff81f7753d70 : 0xffffff8007d05cfa
    0xffffff81f7753dd0 : 0xffffff8007af9ff2
    0xffffff81f7753e20 : 0xffffff8007af296a
    0xffffff81f7753e60 : 0xffffff8007d650ee
    0xffffff81f7753ed0 : 0xffffff8007d71b52
    0xffffff81f7753f50 : 0xffffff8007de182a
    0xffffff81f7753fb0 : 0xffffff8007aced33
    BSD process name corresponding to current thread: launchd
    Mac OS version:
    12C60
    Kernel version:
    Darwin Kernel Version 12.2.0: Sat Aug 25 00:48:52 PDT 2012; root:xnu-2050.18.24~1/RELEASE_X86_64
    Kernel UUID: 69A5853F-375A-3EF4-9247-478FD0247333
    Kernel slide:     0x0000000007800000
    Kernel text base: 0xffffff8007a00000
    System model name: iMac12,2 (Mac-942B59F58194171B)
    System uptime in nanoseconds: 37921137367020
    last loaded kext at 10959037157572: com.apple.driver.AppleUSBCDC          4.1.22 (addr 0xffffff7f89d84000, size 16384)
    last unloaded kext at 11036672774831: com.apple.driver.AppleUSBAudio          2.9.0f6 (addr 0xffffff7f891fe000, size 266240)
    loaded kexts:
    com.focusrite.driver.usb2audio          1.4
    com.serato.usb.kext          2.3.0
    com.rogueamoeba.InstantOnCore          6.0.2
    com.rogueamoeba.InstantOn          6.0.2
    com.apple.driver.AppleHWSensor          1.9.5d0
    com.apple.driver.AppleBluetoothMultitouch          75.15
    com.apple.driver.AudioAUUC          1.60
    com.apple.filesystems.autofs          3.0
    com.apple.iokit.IOBluetoothSerialManager          4.0.9f33
    com.apple.filesystems.ntfs          3.10
    com.apple.driver.AGPM          100.12.69
    com.apple.driver.AppleMikeyHIDDriver          122
    com.apple.driver.AppleMikeyDriver          2.3.1f2
    com.apple.driver.AppleHDA          2.3.1f2
    com.apple.driver.AppleSMCLMU          2.0.2d0
    com.apple.driver.AppleBacklight          170.2.3
    com.apple.iokit.BroadcomBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.driver.AppleSMCPDRC          1.0.0
    com.apple.driver.AppleUpstreamUserClient          3.5.10
    com.apple.kext.AMDFramebuffer          8.0.0
    com.apple.AMDRadeonAccelerator          1.0.0
    com.apple.iokit.IOUserEthernet          1.0.0d1
    com.apple.Dont_Steal_Mac_OS_X          7.0.0
    com.apple.driver.ACPI_SMC_PlatformPlugin          1.0.0
    com.apple.driver.AppleLPC          1.6.0
    com.apple.driver.ApplePolicyControl          3.2.11
    com.apple.driver.AppleMCCSControl          1.0.33
    com.apple.driver.AppleIntelHD3000Graphics          8.0.0
    com.apple.driver.AppleIntelSNBGraphicsFB          8.0.0
    com.apple.driver.AppleUSBCardReader          3.1.0
    com.apple.driver.AppleIRController          320.15
    com.apple.iokit.SCSITaskUserClient          3.5.1
    com.apple.driver.AppleRAID          4.0.6
    com.apple.AppleFSCompression.AppleFSCompressionTypeDataless          1.0.0d1
    com.apple.AppleFSCompression.AppleFSCompressionTypeZlib          1.0.0d1
    com.apple.BootCache          34
    com.apple.driver.XsanFilter          404
    com.apple.iokit.IOAHCIBlockStorage          2.2.2
    com.apple.driver.AppleUSBHub          5.2.5
    com.apple.driver.AirPort.Atheros40          600.70.23
    com.apple.driver.AppleFWOHCI          4.9.6
    com.apple.iokit.AppleBCM5701Ethernet          3.2.5b3
    com.apple.driver.AppleAHCIPort          2.4.1
    com.apple.driver.AppleUSBEHCI          5.4.0
    com.apple.driver.AppleEFINVRAM          1.6.1
    com.apple.driver.AppleIntelCPUPowerManagementClient          196.0.0
    com.apple.driver.AppleACPIButtons          1.6
    com.apple.driver.AppleRTC          1.5
    com.apple.driver.AppleHPET          1.7
    com.apple.driver.AppleSMBIOS          1.9
    com.apple.driver.AppleACPIEC          1.6
    com.apple.driver.AppleAPIC          1.6
    com.apple.nke.applicationfirewall          4.0.39
    com.apple.security.quarantine          2
    com.apple.driver.AppleIntelCPUPowerManagement          196.0.0
    com.apple.driver.IOBluetoothHIDDriver          4.0.9f33
    com.apple.driver.AppleMultitouchDriver          235.28
    com.apple.kext.triggers          1.0
    com.apple.iokit.IOSerialFamily          10.0.6
    com.apple.driver.DspFuncLib          2.3.1f2
    com.apple.iokit.IOFireWireIP          2.2.5
    com.apple.driver.AppleSMBusPCI          1.0.10d0
    com.apple.driver.AppleBacklightExpert          1.0.4
    com.apple.iokit.AppleBluetoothHCIControllerUSBTransport          4.0.9f33
    com.apple.iokit.IOAcceleratorFamily          19.0.26
    com.apple.iokit.IOSurface          86.0.3
    com.apple.iokit.IOBluetoothFamily          4.0.9f33
    com.apple.iokit.IOAudioFamily          1.8.9fc10
    com.apple.kext.OSvKernDSPLib          1.6
    com.apple.driver.AppleSMC          3.1.4d2
    com.apple.driver.IOPlatformPluginLegacy          1.0.0
    com.apple.driver.AppleHDAController          2.3.1f2
    com.apple.iokit.IOHDAFamily          2.3.1f2
    com.apple.driver.IOPlatformPluginFamily          5.2.0d16
    com.apple.driver.AppleGraphicsControl          3.2.11
    com.apple.driver.AppleThunderboltEDMSink          1.1.8
    com.apple.driver.AppleThunderboltEDMSource          1.1.8
    com.apple.driver.AppleSMBusController          1.0.10d0
    com.apple.kext.AMD6000Controller          8.0.0
    com.apple.kext.AMDSupport          8.0.0
    com.apple.iokit.IONDRVSupport          2.3.5
    com.apple.iokit.IOGraphicsFamily          2.3.5
    com.apple.driver.AppleUSBHIDKeyboard          165.5
    com.apple.driver.AppleHIDKeyboard          165.5
    com.apple.driver.AppleThunderboltDPOutAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPInAdapter          1.8.5
    com.apple.driver.AppleThunderboltDPAdapterFamily          1.8.5
    com.apple.driver.AppleThunderboltPCIUpAdapter          1.2.5
    com.apple.driver.AppleThunderboltPCIDownAdapter          1.2.5
    com.apple.iokit.IOSCSIBlockCommandsDevice          3.5.1
    com.apple.iokit.IOUSBMassStorageClass          3.5.0
    com.apple.iokit.IOUSBHIDDriver          5.2.5
    com.apple.driver.AppleUSBMergeNub          5.2.5
    com.apple.driver.AppleUSBComposite          5.2.5
    com.apple.iokit.IOSCSIMultimediaCommandsDevice          3.5.1
    com.apple.iokit.IOBDStorageFamily          1.7
    com.apple.iokit.IODVDStorageFamily          1.7.1
    com.apple.iokit.IOCDStorageFamily          1.7.1
    com.apple.driver.CoreStorage          274.7
    com.apple.iokit.IOAHCISerialATAPI          2.5.0
    com.apple.iokit.IOSCSIArchitectureModelFamily          3.5.1
    com.apple.iokit.IOUSBUserClient          5.2.5
    com.apple.driver.AppleThunderboltNHI          1.6.0
    com.apple.iokit.IOThunderboltFamily          2.1.1
    com.apple.iokit.IO80211Family          500.15
    com.apple.iokit.IOFireWireFamily          4.5.5
    com.apple.iokit.IOEthernetAVBController          1.0.2b1
    com.apple.iokit.IONetworkingFamily          3.0
    com.apple.iokit.IOAHCIFamily          2.2.1
    com.apple.iokit.IOUSBFamily          5.4.0
    com.apple.driver.AppleEFIRuntime          1.6.1
    com.apple.iokit.IOHIDFamily          1.8.0
    com.apple.iokit.IOSMBusFamily          1.1
    com.apple.security.sandbox          220
    com.apple.kext.AppleMatch          1.0.0d1
    com.apple.security.TMSafetyNet          7
    com.apple.driver.DiskImages          344
    com.apple.iokit.IOStorageFamily          1.8
    com.apple.driver.AppleKeyStore          28.21
    com.apple.driver.AppleACPIPlatform          1.6
    com.apple.iokit.IOPCIFamily          2.7.2
    com.apple.iokit.IOACPIFamily          1.4
    com.apple.kec.corecrypto          1.0
    Model: iMac12,2, BootROM IM121.0047.B1F, 4 processors, Intel Core i7, 3.4 GHz, 16 GB, SMC 1.72f2
    Graphics: AMD Radeon HD 6970M, AMD Radeon HD 6970M, PCIe, 2048 MB
    Memory Module: BANK 0/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
    Memory Module: BANK 1/DIMM0, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
    Memory Module: BANK 0/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
    Memory Module: BANK 1/DIMM1, 4 GB, DDR3, 1333 MHz, 0x80AD, 0x484D54333531533642465238432D48392020
    AirPort: spairport_wireless_card_type_airport_extreme (0x168C, 0x9A), Atheros 9380: 4.0.70.23-P2P
    Bluetooth: Version 4.0.9f33 10885, 2 service, 18 devices, 1 incoming serial ports
    Network Service: Ethernet, Ethernet, en0
    Network Service: Wi-Fi, AirPort, en1
    Network Service: VLAN (vlan0), Ethernet, vlan0
    PCI Card: pci1b21,612, sppci_ahci, Thunderbolt@107,0,0
    PCI Card: pci1b21,612, sppci_ahci, Thunderbolt@10,0,0
    Serial ATA Device: WDC WD1001FALS-403AA0, 1 TB
    Serial ATA Device: APPLE SSD TS256C, 251 GB
    Serial ATA Device: OPTIARC DVD RW AD-5690H
    Serial ATA Device: WDC WD20EARX-00PASB0, 2 TB
    Serial ATA Device: WDC WD20EARX-00PASB0, 2 TB
    Serial ATA Device: WDC WD20EURS-63S48Y0, 2 TB
    Serial ATA Device: WDC WD20EURS-63S48Y0, 2 TB
    USB Device: FaceTime HD Camera (Built-in), apple_vendor_id, 0x850b, 0xfa200000 / 3
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfa100000 / 2
    USB Device: Serato Scratch LIVE(c)2004, 0x13e5, 0x0001, 0xfa130000 / 6
    USB Device: PTK-540WL, 0x056a  (WACOM Co., Ltd.), 0x00bc, 0xfa120000 / 5
    USB Device: BRCM2046 Hub, 0x0a5c  (Broadcom Corp.), 0x4500, 0xfa110000 / 4
    USB Device: Bluetooth USB Host Controller, apple_vendor_id, 0x8215, 0xfa111000 / 7
    USB Device: hub_device, 0x0424  (SMSC), 0x2514, 0xfd100000 / 2
    USB Device: Scarlett 18i6 USB, 0x1235, 0x8004, 0xfd130000 / 6
    USB Device: Keyboard Hub, apple_vendor_id, 0x1006, 0xfd140000 / 5
    USB Device: Apple Keyboard, apple_vendor_id, 0x0221, 0xfd142000 / 7
    USB Device: Internal Memory Card Reader, apple_vendor_id, 0x8403, 0xfd110000 / 4
    USB Device: IR Receiver, apple_vendor_id, 0x8242, 0xfd120000 / 3

    The following may work for you as a shortcut to testing, instead of fully uninstalling each of those programs. It may also fail for some, but that's the worst that will happen, and it may save you a lot of time.
    For any of the possible culprit kernel extensions, it is not necessary to completely uninstall the parent program.
    You can temporarily uninstall any .kext, which may be causing the problem, by doing the following: Open Terminal in Applications>Utilties and copy/paste
    sudo kextunload
    Important, leave a space after kextunload
    Next, navigate to the /System/Library/ and select Extensions. Inside that folder, find the related .kext in question, which you should drag into the Terminal window. (After dragging it in, the file will stay where it belongs in its original location.) This will automatically fill the Terminal window with the name and path to the file.
    This is an example only of what the full command will then look like; it will not necessarily be found on your computer.
    sudo kextunload /System/Library/Extensions/PaceSupportFamily.kext/
    Hit return. If you have never used the sudo prefix before, you will get a warning, which you can disregard. Then enter your admin password, which you won't see on the screen as you type it in and hit return. Wait for the $ sign prompt to reappear, which will indicate the extension has been unloaded. Then just close the window.
    This will have the effect of disabling the program. If it fails to be the source of the problem, to reload/enable it, substitute kextload for kextunload, using the above procedure.
    Other than that, have a look at this article on resolving kernel panics. Faulty RAM is a frequent cause.
    http://www.thexlab.com/faqs/kernelpanics.html

  • Have to reinstall Flash after every reboot.

    Windows 7 - IE9 - Flash version 11.0.1.152 - Plugins and OS up to date - ESET Smart Securty 4
    I get prompted to install new version of Flash after a reboot, so it happens at least once a day.
    I install Flash and it installs just fine and works until the PC boots up again.
    I tried some of the following:
    - Use Adobe Flash Uninstall program before installing
    - Using standalone install program
    - Checked ActiveX Filter and it was off...turning it on causes
       this same behavior, but the problem I have has nothing to do with the filter
    Not sure when this started, but the user didn't have this problem until recently.
    I am using ESET Smart Security 4. On all our systems, and his PC is the only
    one that is having a problem. Need some pretty hard evidence before I bother
    with uninstalling ESET just to see if that would help.
    The part that is really strange...if I go to manage add-on's while it is working,
    I see the Flash player there and Adobe's name there and that it is enabled.
    After I reboot and go into the add-on manager, Flash is still there and still
    enabled, but it now says "Unknown" instead of "Adobe" and is no longer
    listed near the other Adobe programs. But then, when I reinstall it, that gets
    "fixed" and now says Adobe again. So it almost seems like an IE9 problem
    and possibly a corruption problem. No known problems with the PC. I suppose
    that reloading the PC from scratch would fix the problem...at least I hope it would,
    but I'm also not ready to do major surgery if there is an easier fix.

    sorry no hablo ingless
    Date: Fri, 14 Oct 2011 22:39:15 -0600
    From: [email protected]
    To: [email protected]
    Subject: Have to reinstall Flash after every reboot.
        Re: Have to reinstall Flash after every reboot.
        created by ʇɐb ɹəuəllıʍ in Using Flash Player - View the full discussion
    I also downloaded that Nirsoft tool, and on my (64-bit) system I also only see the ocx and exe registered.  But everything works well on my system. So I currently have no other ideas.  Hopefully someone from the Adobe team will have a look at this topic.
         Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/3972457#3972457
         To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/3972457#3972457. In the Actions box on the right, click the Stop Email Notifications link.
         Start a new discussion in Using Flash Player by email or at Adobe Forums
      For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

  • Reinstalli​ng Audio drivers after every reboot

    Hi,
    I have a P750 PSAY3A-02J001 which i gor in australia.
    Recently I had to buy a new hard drive (as the old was scratched) and have windows 7 reinstalled. This was done in England.
    After this I then restored from my external Hard drive.
    After this restore i saw a lot of icons shaped like a clamp which all seemed to refer to specific Toshiba settings. I have opened and installed all of these and they appear to be working okay except for the Audio drivers.
    After every reboot I have no sound when playing movies etc and have to reinstall the drivers again.
    I have saved the folder on my desktop (for ease to reinstall every time) however Im wondering if the Laptop is not starting up this driver or its being saved in the wrong spot? any way to fix this?
    Also I was attempting to use the Toshiba doanloads section to update everything however under my Model P750 there is no PSAY3A-02J001 (my model doesnt seem to exsist?)
    Many thanks in advance

    Satellite P750/02J (PSAY3A-02J001)
    You didn't find your machine listed here because this site is only for US computers.
    Downloads for your Aussie model are here.
    After this I then restored from my external Hard drive.
    Please tell us all about that backup image. Exactly which application are you using?
    After this restore i saw a lot of icons shaped like a clamp which all seemed to refer to specific Toshiba settings. I have opened and installed all of these and they appear to be working okay except for the Audio drivers.
    What is the make and specific model of the new hard drive? If it uses advanced-format technology, that may be the source of the trouble.
    -Jerry

  • After upgrading to Firefox 9.0.1, on first run after every reboot, the following warning apears for every installed Add-on. "Another program on your computer would like to modify Firefox with the following add-on"

    After upgrading to Firefox 9.0.1, on first run after every reboot, the following warning appears for every installed Add-on.
    "Another program on your computer would like to modify Firefox with the following add-on"
    So, i have to "Enable" my installed Add-ons on each reboot.
    Would you please help me !
    P.S.: I found that these files (and some others) will be deleted on each reboot, and it happens on computer start up (not at shut down)!
    extensions.ini
    extensions.sqlite
    extensions.sqlite-journal
    And as i mentioned, i have the same anti virus on my laptop and desktop, but i have not any problem on laptop.

    Do you have security software that acts like a sandbox or uses virtualization to restore files on a next boot?
    See also:
    *http://kb.mozillazine.org/Preferences_not_saved
    *https://support.mozilla.org/kb/Preferences+are+not+saved
    It is possible that there is a problem with the file(s) that store the extensions registry.
    Delete the files extensions.* (e.g. extensions.sqlite, extensions.ini, extensions.cache) and compatibility.ini in the Firefox profile folder to reset the extensions registry.
    *https://support.mozilla.org/kb/Profiles
    New files will be created when required.
    See "Corrupt extension files":
    *http://kb.mozillazine.org/Unable_to_install_themes_or_extensions
    *https://support.mozilla.org/kb/Unable+to+install+add-ons
    If you see disabled, not compatible, extensions in "Tools > Add-ons > Extensions" then click the Tools button at the left side of the Search Bar (or click the "Find Updates" button in older Firefox versions) to do a compatibility check or see if there is a compatibility update available.

  • Iphone stuck at apple logo after every reboot?

    I came to know d solution of first holding home and sleep button then press + button but why is it happening after every reboot i am doing?help

    Hi kstbespoo,
    Thank you for visiting Apple Support Communities.
    It sounds like your iPhone won't get past the Apple Logo even after a reset.
    If so, you may need to restore the iPhone with iTunes.  Note you should have a good backup.
    iOS: Not responding or does not turn on
    http://support.apple.com/kb/TS3281
    5.  If the above steps do not resolve the issue, or the if the screen remains black or shows a persistent Apple logo, try restoring with iTunes:
    Connect the device to your computer and open iTunes.
    If the device appears in iTunes, select and click Restore on the Summary pane. Learn more about restoring iOS software.
    If the device doesn't appear in iTunes, try to force the device into recovery mode, and then restore it.
    6.  If the above steps do not resolve the issue, contact Apple.
    Best Regards,
    Nubz

  • [solved] network interface names changed?

    Hi,
    I reinstalled arch on my laptop yesterday (hard drive failure). Normally, not to big a deal. Took me four hours to get arch installed. Why? couldn't for the life of me figure out how to get the wireless connected (ethernet connection unavailable, port is physically damaged). In the end, my fault, I should have tried iwconfig earlier.
    It seems that my network interfaces have all changed names since the last time i installed. The wireless interface has changed from the sensible 'wlan0' to the mystical 'wlp4s0'.
    also, eth0 is now enp9s0.
    This has messed up a number of my scripts and above all is more than a little confusing, wlan0 feels right, wlp4s0 feels wrong.
    Now, I'm not opposed to change. I like change, even if it breaks a lot of my scripts, but I like to know why something has changed to something less intuitive.
    Why was this change put in place? I can't find any real info on it after 30 mins googling.
    Can it be changed back through some setting somewhere without upsetting whatever problem it's supposed to fix?
    Last edited by insane_alien (2013-04-21 20:01:31)

    insane_alien wrote:Thanks kaszak, exactly what i was looking for. Looks like i was just using the wrong keywords.
    Yes you should have just searched for "Welcome to Arch!".

  • [SOLVED] Network interface name keeps changing

    My network interface name keeps changing between wlp2s0 and wlan0. This is a real pain, since I never know what name will be generated at boot. Most of the time it's called wlp2s0, so this is what netctl is set up to handle by itself. At boots were wlan0 is generated I have to connect manually.
    I've tried making the name static by adding a rule to the /etc/udev/rules.d/10-network.rules. The rule i added was:
    SUBSYSTEM=="net", ACTION=="add", ATTR{address}=="48:5d:60:7e:64:e9", NAME="wlp2s0"
    Wlp2s0 is generated at boot alright, but I still have to connect manually with this solution. As if the "new" wlp2s0 is not recognized as the old one (same MAC). What gives?
    This is on an Asus Eee 1001PXD, with the Qualcomm Atheros AR9285.
    Last edited by madr (2013-05-18 20:09:34)

    I've now been able to replicate the issue, and run the command:
    journalctl -b
    I did find the output:
    mai 18 02:30:02 <hostname> systemd-udevd[126]: error changing net interface name wlan0 to wlp2s0: Device or resource busy
    I haven't been able to process the whole output yet (I'll continue tomorrow if necessary), but I've found some things that I hope will clearify things. I get similar outputs to the following a lot throughout:
    mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: carrier lost
    mai 18 02:30:03 <hostname> dhcpcd[237]: wlan0: waiting for carrier
    mai 18 02:30:04 <hostname> systemd[1]: [email protected]: control process exited, code=exited status=1
    mai 18 02:30:04 <hostname> systemd[1]: Failed to start Automatic wireless network connection using netctl profiles.
    mai 18 02:30:04 <hostname> systemd[1]: Unit [email protected] entered failed state.
    mai 18 02:30:04 <hostname> systemd[1]: Starting Network.
    mai 18 02:30:04 <hostname> systemd[1]: Reached target Network.
    EDIT:
    I see now that this is later in time, so that's not so strange after all. I'll look some more.
    EDIT2:
    The error code that a name change i impossible is the first time the term 'wlan0' occurs in the log. However there's a line much earlier that talks about wlp2s0:
    mai 18 02:29:59 <hostname> systemd[1]: Expecting device sys-subsystem-net-devices-wlp2s0.device...
    But as I said, if this information doesn't help, I'll have a closer look at the output tomorrow. Getting late here in Norway now.
    Last edited by madr (2013-05-18 01:20:50)

  • Wallpaper keeps changing after every reboot!

    After a reboot my wallpaper changes automatically to Andromeda Galaxy.
    I want to use another desktop like Aurora, but i can't make it stay there!!??
    My system is macbook pro early 2011 / Mac OS x 10.7.2.
    Help plz........

    If your wallpaper changes back to default (Galaxy) after reboot or after logout it is because
    the wallpaper you set was on another drive.
    and this drive loads after your settings are loaded.
    MAC OS X Lion / Mountain Lion does not save your wallpaper on the native HDD, rather tries to load the wallpaper from the original HDD, i guess only the path to the wallpaper is saved in the OS X settings.
    Anyways..
    what happens is that when your OS X boots up it does not find the path to your wallpaper since the HDD you've saved your wallpapers in has not mounted yet.
    One basic solution for this is to save your wallpapers in the HDD where you've installed the MAC OS X..
    but I didnt want to save all my wallpapers in Native Mountain Lion HDD, so i figured out my perfect fix..!!
    This is how i fixed..
    I found this file in my Lion install drive.. autodiskmount.plist
    Library/Preferences/SystemConfiguration/autodiskmount.plist
    If you can't find it on your OS X Install Drive then you can make one by typing
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="0.9">
    <dict>
    <key>AutomountDisksWithoutUserLogin</key><true/>
    </dict>
    </plist>
    rename ur txt file to autodiskmount.plist
    save this in your MAC OS X HDD
    Library/Preferences/SystemConfiguration/autodiskmount.plist
    Voila..!!
    restart your system..
    Now save your wallpapers where ever you want on your computer and i didnt have to worry about the wallpaper changing back to default.

  • [Solved] Network doesn't work after hibernate?

    Hello!  This is my first legit Linux install so excuse me if I'm a bit slow.  I installed Arch last night and everything went smoothly.  However, after I tested out hibernate on my machine, the network doesn't seem to work.  Just prior to the hibernate, I installed Pidgin and Skype but they worked alright, so I think that the hibernate caused a problem on eth0.
    I have an Asus P8Z68-V Pro motherboard with an Intel 82579V Gigabit Ethernet Controller that's using the e1000e driver.  Running "dmesg | grep e1000e" says that it is up.
    I'm not entirely clear here, but from reading, I think that I have several ways of connecting to the network, including network, dhcpcd, networkmanager, and wicd.  I am using wicd so I did the following (or at least I think I am only using wicd):
    #rc.d stop network
    #rc.d stop dhcpcd
    #rc.d stop networkmanager
    Similarly, I put a ! in front of network in rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "", "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged, using "" makes hwclock fall back
    # to the value in /var/lib/hwclock/adjfile
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # Note: if unset, the value in /etc/localtime is used unchanged
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    LOCALE="en_US.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="America/New_York"
    KEYMAP="us"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MODULES=()
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="Vicious"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP) (optional, defaults to 255.255.255.0)
    # - broadcast: broadcast address (ignored for DHCP) (optional)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # broadcast=192.168.0.255
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=
    netmask=
    broadcast=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(hwclock syslog-ng dbus !network netfs crond wicd)
    Restarting eth0 through wicd-cli still did not work.  I also tried resuscitating the network via instructions on the configure network page before trying to focus solely on wicd.
    I found a few similar problems on the forums by searching "wicd hibernate" and tried several solutions but they did not work.  Several problems seem to be that the network doesn't work after a suspend because I guess the stuff in RAM did not get saved?  But people were able to restart the network by running "/usr/lib/wicd/autoconnect.py" and I wasn't able to get this to work.  As a final effort, I added "resume" into mkinitcpio.conf and placed the machine into sleep again to see if it may magically reset something but of course this did not happen .
    mkinitcpio.conf:
    # vim:set ft=sh
    # MODULES
    # The following modules are loaded before any boot hooks are
    # run. Advanced users may wish to specify all system modules
    # in this array. For instance:
    # MODULES="piix ide_disk reiserfs"
    MODULES=""
    # BINARIES
    # This setting includes any additional binaries a given user may
    # wish into the CPIO image. This is run first, so it may be used to
    # override the actual binaries used in a given hook.
    # (Existing files are NOT overwritten if already added)
    # BINARIES are dependency parsed, so you may safely ignore libraries
    BINARIES=""
    # FILES
    # This setting is similar to BINARIES above, however, files are added
    # as-is and are not parsed in any way. This is useful for config files.
    # Some users may wish to include modprobe.conf for custom module options
    # like so:
    # FILES="/etc/modprobe.d/modprobe.conf"
    FILES=""
    # HOOKS
    # This is the most important setting in this file. The HOOKS control the
    # modules and scripts added to the image, and what happens at boot time.
    # Order is important, and it is recommended that you do not change the
    # order in which HOOKS are added. Run 'mkinitcpio -H <hook name>' for
    # help on a given hook.
    # 'base' is _required_ unless you know precisely what you are doing.
    # 'udev' is _required_ in order to automatically load modules
    # 'filesystems' is _required_ unless you specify your fs modules in MODULES
    # Examples:
    ## This setup specifies all modules in the MODULES setting above.
    ## No raid, lvm2, or encrypted root is needed.
    # HOOKS="base"
    ## This setup will autodetect all modules for your system and should
    ## work as a sane default
    # HOOKS="base udev autodetect pata scsi sata filesystems"
    ## This is identical to the above, except the old ide subsystem is
    ## used for IDE devices instead of the new pata subsystem.
    # HOOKS="base udev autodetect ide scsi sata filesystems"
    ## This setup will generate a 'full' image which supports most systems.
    ## No autodetection is done.
    # HOOKS="base udev pata scsi sata usb filesystems"
    ## This setup assembles a pata mdadm array with an encrypted root FS.
    ## Note: See 'mkinitcpio -H mdadm' for more information on raid devices.
    # HOOKS="base udev pata mdadm encrypt filesystems"
    ## This setup loads an lvm2 volume group on a usb device.
    # HOOKS="base udev usb lvm2 filesystems"
    HOOKS="base udev autodetect pata scsi sata resume filesystems usbinput"
    # COMPRESSION
    # Use this to compress the initramfs image. With kernels earlier than
    # 2.6.30, only gzip is supported, which is also the default. Newer kernels
    # support gzip, bzip2 and lzma. Kernels 2.6.38 and later support xz
    # compression.
    #COMPRESSION="gzip"
    #COMPRESSION="bzip2"
    #COMPRESSION="lzma"
    #COMPRESSION="xz"
    #COMPRESSION="lzop"
    # COMPRESSION_OPTIONS
    # Additional options for the compressor
    #COMPRESSION_OPTIONS=""
    Not sure if my fstab.conf is useful but if this has something to do with settings getting "lost" in swap, here it is.  Linux is on an SSD and HDD (sda and sdc) and Windows 7 is on a HDD (sdb).
    fstab.conf:
    # /etc/fstab: static file system information
    # <file system> <dir> <type> <options> <dump> <pass>
    none /tmp tmpfs nodev,nosuid,noatime,size=2000M,mode=1777 0 0
    /dev/sda1 / ext4 defaults,noatime,discard 0 1
    /dev/sda2 /home ext4 defaults,noatime,discard 0 2
    /dev/sdc1 /boot ext4 defaults 0 1
    /dev/sdc2 /var ext4 defaults 0 0
    /dev/sdc3 swap swap defaults 0 0
    /dev/sdc4 /media/data ext4 defaults 0 0
    shm /dev/shm tmpfs nodev,nosuid,size=10G 0 0
    Is wicd causing these problems or did I configure something else improperly?  Would appreciate any help to get eth0 up again!
    Last edited by TheBigCow7 (2011-09-13 17:57:20)

    Ok, I think I've made some progress!  Hibernate definitely affects my network connection.  Could this be a kernel 3.0 problem?
    I noticed that ifconfig showed eth0 without an inet addr, just an inet6 addr for the longest time.  e1000e seemed to be loading up ok.  I'm not certain here, but I think that meant the dhcp settings didn't stick, or something along those lines.
    Trying to use dhcpcd like the instructions here did not work.  By some chance, one attempt did work and while it did, I downloaded and installed dhclient.  After that one successful attempt, renewing the DHCP lease via dhcpcd did not work again.
    Luckily though, I found that running "dhclient eth0" worked.  My DHCP settings seemed to have somehow gotten messed up after my initial, problematic hibernate to the point where none would stick, even after a reboot.  Manually typing in "dhclient eth0" would get eth0 working, so I decided to add it to the bottom of /etc/rc.local, like in the example on the networking page.
    Now, eth0 works after a boot.  However, after the daemons load up during the boot process, my computer takes a long time to get to the login prompt (this is relatively speaking, since I am on a SSD and the boot process used to be blazing fast before).  I'm pretty sure it's because I added "dhclient eth0" to /etc/rc.local.
    I should say that even with these changes, after a hibernate, my eth0 still does not work and if it weren't for the edit to /etc/rc.local, eth0's inet settings would still not stick after a reboot (that is to say, the hibernate does do something to my network settings). 
    Is this the correct/most efficient way to fix my DHCP problem?  Can I fix my "eth0 after hibernate" issue?  Also, can I make my DHCP settings boot up without changes to /etc/rc.local so that I can get a fast boot again (still not sure how it was able to work before without my edit)?

  • [SOLVED] Network interface enp2s0 no longer detected

    Hello,
    Yesterday after rebooting, right after Grub, systemd-fsck does its stuff (clearing blocks, etc...) then nothing.
    After a quick research I've found that removing "quiet" from the Grub command line would allow more messages to be displayed, which was quite helpful.
    This is in fact not a partition mounting problem, here is what I have:
    [ OK ] Started Accounts Service.
    [ TIME ] Time out waiting for device sys-subsytem-net-devices-enp2s0.device
    [ DEPEND ] Dependency failed for dhcpcd on enp2s0.
    [ OK ] Reached target Multi-User System.
    [ OK ] Reached target Graphical Interface.
    I obviously have a networking problem (and probably a "Graphical Interface" or Nvidia related thing problem), so I log in another console, and after doing ip link list, I only have the loopback listed, no enp2s0 or WiFi interface, for some reason they are no longer detected.
    I've run the live version of Arch to mount and arch-chroot my partitions, not to mention my network interfaces are detected and I can upgrade things with pacman, I've tried to disable dhcpcd on enp2s0 to avoid the time out thing, and while I can say it does what it's supposed to do, it doesn't solve anything anyway since I'm still stuck at Reached target Graphical Interface. (and don't have any network access, to state the obvious).
    I've even thought about a Kernel/Driver problem after an update, but I'm not sure, any idea or some log I can have a look at ?
    Thank you for your time.
    Last edited by Blaxar (2013-06-25 18:35:50)

    Thank for the tip, I've just had a look at pacman.log:
    [2013-06-23 11:07] [PACMAN] Running 'pacman -Syu'
    [2013-06-23 11:07] [PACMAN] synchronizing package lists
    [2013-06-23 11:08] [PACMAN] starting full system upgrade
    [2013-06-23 11:10] [PACMAN] upgraded automake (1.13.2-1 -> 1.13.4-1)
    [2013-06-23 11:10] [PACMAN] upgraded ca-certificates (20130119-2 -> 20130610-1)
    [2013-06-23 11:10] [PACMAN] upgraded cantarell-fonts (0.0.12-1 -> 0.0.13-1)
    [2013-06-23 11:10] [PACMAN] upgraded cloog (0.18.0-1 -> 0.18.0-2)
    [2013-06-23 11:10] [PACMAN] upgraded libcups (1.6.2-2 -> 1.6.2-3)
    [2013-06-23 11:10] [PACMAN] upgraded cups (1.6.2-2 -> 1.6.2-3)
    [2013-06-23 11:10] [PACMAN] upgraded e2fsprogs (1.42.7-2 -> 1.42.8-1)
    [2013-06-23 11:10] [PACMAN] upgraded glib2 (2.36.2-1 -> 2.36.3-2)
    [2013-06-23 11:10] [PACMAN] upgraded xkeyboard-config (2.9-1 -> 2.9-2)
    [2013-06-23 11:10] [PACMAN] upgraded iso-codes (3.41-1 -> 3.43-1)
    [2013-06-23 11:10] [PACMAN] upgraded gnome-desktop (1:3.8.3-1 -> 1:3.8.3-2)
    [2013-06-23 11:10] [PACMAN] upgraded gnome-icon-theme-symbolic (3.8.2.2-1 -> 3.8.3-1)
    [2013-06-23 11:10] [PACMAN] upgraded gzip (1.5-3 -> 1.6-1)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-e2fsprogs (1.42.7-1 -> 1.42.8-1)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-glib2 (2.36.2-1 -> 2.36.3-2)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-krb5 (1.11.2-1 -> 1.11.3-1)
    [2013-06-23 11:10] [PACMAN] upgraded libxi (1.7.1-1 -> 1.7.1-2)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-libxi (1.7.1-1 -> 1.7.1-2)
    [2013-06-23 11:10] [PACMAN] upgraded mesa (9.1.3-1 -> 9.1.3-2)
    [2013-06-23 11:10] [PACMAN] upgraded lib32-mesa (9.1.3-2 -> 9.1.3-3)
    [2013-06-23 11:10] [PACMAN] upgraded libbsd (0.5.2-1 -> 0.5.2-2)
    [2013-06-23 11:10] [PACMAN] upgraded libltdl (2.4.2-9 -> 2.4.2-10)
    [2013-06-23 11:10] [PACMAN] upgraded libmbim (1.0.0-1 -> 1.2.0-1)
    [2013-06-23 11:10] [PACMAN] upgraded libnautilus-extension (3.8.1-1 -> 3.8.2-1)
    [2013-06-23 11:10] [PACMAN] upgraded libpeas (1.8.0-2 -> 1.8.1-1)
    [2013-06-23 11:10] [PACMAN] upgraded libqmi (1.2.0-2 -> 1.4.0-1)
    [2013-06-23 11:10] [PACMAN] upgraded libreoffice-uk (4.0.3-1 -> 4.0.4-1)
    [2013-06-23 11:10] [PACMAN] upgraded libtool (2.4.2-9 -> 2.4.2-10)
    [2013-06-23 11:10] [PACMAN] upgraded libusb-compat (0.1.4-2 -> 0.1.5-1)
    [2013-06-23 11:10] [PACMAN] upgraded libxv (1.0.8-1 -> 1.0.9-1)
    [2013-06-23 11:10] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-06-23 11:10] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.7-1-ARCH
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> Starting build: 3.9.7-1-ARCH
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-06-23 11:10] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-06-23 11:11] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-06-23 11:11] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-06-23 11:11] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-06-23 11:11] [PACMAN] upgraded linux (3.9.6-1 -> 3.9.7-1)
    [2013-06-23 11:11] [PACMAN] upgraded logrotate (3.8.4-2 -> 3.8.5-1)
    [2013-06-23 11:11] [PACMAN] upgraded nautilus (3.8.1-1 -> 3.8.2-1)
    [2013-06-23 11:11] [PACMAN] upgraded nvidia (319.23-2 -> 319.23-3)
    [2013-06-23 11:11] [PACMAN] upgraded openresolv (3.5.4-3 -> 3.5.5-1)
    [2013-06-23 11:11] [PACMAN] upgraded pacman (4.1.1-1 -> 4.1.2-1)
    [2013-06-23 11:11] [PACMAN] upgraded poppler (0.22.4-1 -> 0.22.5-1)
    [2013-06-23 11:11] [PACMAN] upgraded poppler-glib (0.22.4-1 -> 0.22.5-1)
    [2013-06-23 11:11] [PACMAN] upgraded ppp (2.4.5-7 -> 2.4.5-8)
    [2013-06-23 11:13] [PACMAN] Running 'pacman -S libreoffice-fr'
    [2013-06-23 11:13] [PACMAN] installed libreoffice-fr (4.0.4-1)
    [2013-06-23 11:13] [PACMAN] Running 'pacman -S libreoffice'
    [2013-06-23 11:15] [PACMAN] installed raptor (2.0.9-2)
    [2013-06-23 11:15] [PACMAN] installed rasqal (1:0.9.30-1)
    [2013-06-23 11:15] [PACMAN] installed redland (1:1.0.16-2)
    [2013-06-23 11:15] [PACMAN] installed hyphen (2.8.6-1)
    [2013-06-23 11:15] [PACMAN] installed boost-libs (1.53.0-2)
    [2013-06-23 11:15] [PACMAN] installed clucene (2.3.3.4-6)
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * see https://wiki.archlinux.org/index.php/LibreOffice
    [2013-06-23 11:15] [ALPM-SCRIPTLET] -------------------------------------------------------------------
    [2013-06-23 11:15] [ALPM-SCRIPTLET] LibreOffice has been split into several packages:
    [2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-common
    [2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{base,calc,draw,impress,math,writer} - frontend applications
    [2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{gnome,kde4} - desktop integration plugins
    [2013-06-23 11:15] [ALPM-SCRIPTLET] - libreoffice-{sdk,sdk-doc} - add-on and doc for programming using
    [2013-06-23 11:15] [ALPM-SCRIPTLET] the LibreOffice APIs and for creating
    [2013-06-23 11:15] [ALPM-SCRIPTLET] extensions (UNO components).
    [2013-06-23 11:15] [ALPM-SCRIPTLET] -------------------------------------------------------------------
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * you need to install at least one libreoffice-langpack
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * you may want to pacman -Ss libreoffice-extensions
    [2013-06-23 11:15] [ALPM-SCRIPTLET] to see what additional extensions are prepared to install
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * it's recommended to install {hunspell,mythes,hyphen}-xx pkg
    [2013-06-23 11:15] [ALPM-SCRIPTLET] for spell checking
    [2013-06-23 11:15] [ALPM-SCRIPTLET] * make sure you have installed some ttf font (ttf-dejavu recommended)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-common (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-base (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed lpsolve (5.5.2.0-2)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-calc (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-draw (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-gnome (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-impress (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-math (4.0.4-1)
    [2013-06-23 11:15] [PACMAN] installed libwpd (0.9.6-1)
    [2013-06-23 11:15] [PACMAN] installed libwps (0.2.9-1)
    [2013-06-23 11:15] [PACMAN] installed libreoffice-writer (4.0.4-1)
    [2013-06-23 19:57] [PACMAN] Running 'pacman -S ssh-key'
    [2013-06-23 23:01] [PACMAN] Running 'pacman -Syu'
    [2013-06-23 23:01] [PACMAN] synchronizing package lists
    --From the live CD from now on--
    [2013-06-23 23:29] [PACMAN] Running 'pacman -Syu'
    [2013-06-23 23:29] [PACMAN] synchronizing package lists
    [2013-06-23 23:30] [PACMAN] starting full system upgrade
    [2013-06-23 23:32] [PACMAN] removed grub-bios (2.00-2)
    [2013-06-23 23:32] [PACMAN] removed grub-common (2.00-2)
    [2013-06-23 23:32] [ALPM-SCRIPTLET] Generating grub.cfg.example config file...
    [2013-06-23 23:32] [ALPM-SCRIPTLET] This may fail on some machines running a custom kernel.
    [2013-06-23 23:32] [ALPM-SCRIPTLET] done.
    [2013-06-23 23:32] [PACMAN] installed grub (2.00-1)
    [2013-06-23 23:32] [PACMAN] upgraded lib32-libjpeg-turbo (1.3.0-2 -> 1.3.0-3)
    [2013-06-23 23:32] [PACMAN] upgraded libgsf (1.14.26-1 -> 1.14.27-1)
    [2013-06-23 23:32] [PACMAN] upgraded libquvi-scripts (0.4.15-1 -> 0.4.16-1)
    Among all of that, I've spotted this:
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-06-23 11:10] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    Do you think this may explain something ?
    Anyway, from lspci:
    00:00.0 Host bridge: Intel Corporation Core Processor DMI (rev 11)
    00:03.0 PCI bridge: Intel Corporation Core Processor PCI Express Root Port 1 (rev 11)
    00:08.0 System peripheral: Intel Corporation Core Processor System Management Registers (rev 11)
    00:08.1 System peripheral: Intel Corporation Core Processor Semaphore and Scratchpad Registers (rev 11)
    00:08.2 System peripheral: Intel Corporation Core Processor System Control and Status Registers (rev 11)
    00:08.3 System peripheral: Intel Corporation Core Processor Miscellaneous Registers (rev 11)
    00:10.0 System peripheral: Intel Corporation Core Processor QPI Link (rev 11)
    00:10.1 System peripheral: Intel Corporation Core Processor QPI Routing and Protocol Registers (rev 11)
    00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
    00:1a.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
    00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06)
    00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06)
    00:1c.3 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 4 (rev 06)
    00:1c.5 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 6 (rev 06)
    00:1d.0 USB controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06)
    00:1e.0 PCI bridge: Intel Corporation 82801 PCI Bridge (rev a6)
    00:1f.0 ISA bridge: Intel Corporation 5 Series Chipset LPC Interface Controller (rev 06)
    00:1f.2 RAID bus controller: Intel Corporation 82801 SATA Controller [RAID mode] (rev 06)
    00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06)
    01:00.0 VGA compatible controller: NVIDIA Corporation GT200 [GeForce GTX 260] (rev a1)
    02:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168 PCI Express Gigabit Ethernet controller (rev 03)
    03:00.0 FireWire (IEEE 1394): VIA Technologies, Inc. VT6315 Series Firewire Controller
    04:00.0 Multimedia video controller: Conexant Systems, Inc. CX23887/8 PCIe Broadcast Audio and Video Decoder with 3D Comb (rev 04)
    05:00.0 Network controller: Ralink corp. RT3090 Wireless 802.11n 1T/1R PCIe
    ff:00.0 Host bridge: Intel Corporation Core Processor QuickPath Architecture Generic Non-Core Registers (rev 04)
    ff:00.1 Host bridge: Intel Corporation Core Processor QuickPath Architecture System Address Decoder (rev 04)
    ff:02.0 Host bridge: Intel Corporation Core Processor QPI Link 0 (rev 04)
    ff:02.1 Host bridge: Intel Corporation Core Processor QPI Physical 0 (rev 04)
    ff:03.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller (rev 04)
    ff:03.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Target Address Decoder (rev 04)
    ff:03.4 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Test Registers (rev 04)
    ff:04.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Control Registers (rev 04)
    ff:04.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Address Registers (rev 04)
    ff:04.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Rank Registers (rev 04)
    ff:04.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 0 Thermal Control Registers (rev 04)
    ff:05.0 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Control Registers (rev 04)
    ff:05.1 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Address Registers (rev 04)
    ff:05.2 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Rank Registers (rev 04)
    ff:05.3 Host bridge: Intel Corporation Core Processor Integrated Memory Controller Channel 1 Thermal Control Registers (rev 04)
    and ip a:
    1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
    valid_lft forever preferred_lft forever
    inet6 ::1/128 scope host
    valid_lft forever preferred_lft forever
    Last edited by Blaxar (2013-06-24 20:10:25)

Maybe you are looking for

  • Retrieving and synching previous messages on multiple devices

    Is it possible to improve the way exchanged messages on Messages Beta/iMessages on one device are subsequently retrieved on another using the same account? If one swaps devices in a chat then previous messages are retrieved sequentially making the ch

  • What size Hard Drive can I put in my iBook?

    Hello all, I have a 12 inch 800 MHz iBook. The 30GB internal drive failed on me a couple days ago. Good thing for external drives:). Anywho, I'm just wondering what the biggest size drive I can get for a replacement? Thanks for any and all help, Dan

  • Scheduling JDBC adapter in PI 7.0 SP09

    Hello Experts, My client is using PI 7.0 sp09.  I have a JDBC adapter that needs to execute once every 24 hours but each time the server is restarted the adapter executes and starts the 24 hr cycle again from that time.  Is there any way to schedule

  • How do you tell if OS4 upgrade has hung???

    iTunes says "Restoring iPhone software..." with progress bar and iphone 3GS has apple logo and progress bar, and both have not moved in an hour... has it hung? no errors... just not progressing...???

  • Sony DSC-RX100 Video and Images supported?

    Hey all, I was wondering about if anyone has a DSC-RX100 that they have successfully used with iPhoto.  Successful = imported video & images by connecting their camera to iphoto and clicking import. I had a dsc-hv9v sony camera which was great until