[Solved] Network problems with MSI GX60 Destroyer, killer newtork LAN and wireless

Hi, I bought a MSI GX60 Destroyer 2 weeks ago, and I realized that my internet was a little slow, you don't realize in the web but when downloading it doesn't perform how it should, I tested the speed now with wireless and I got 5 mb/s, and I have 20 mb/s in my house (I also tested with cellphones and other pc's), with LAN the speed was normal, so I saw some forums about the Killer network, I tried to change the drivers but nothing, the wireless is limited to 5 mb/s and now my LAN too.... please help, my phone has 4x better internet than my GAMING Laptop.
Also the Atheros drivers are a pain in the ass it's really hard to remove them.
I'm now with the drivers without the Management app.

Quote from: hch;109858
Hi Tzin,
Which graphics driver are you using?
The quick stream is installed on the notebook with the generic graphics driver from the AMD website.
If you install the AMD's generic graphics driver, you'll find the quick stream program in your Uninstall programs window.(Control Panel> Uninstall a program)
Hi hch , i only can find the "amd cystal manager " under the unintall a program , so when i click into in then only saw the device but dont see the quick stream .

Similar Messages

Network problems with MSI 790FX-GD70

Hi All
I have a problem with the onboard network cards.
It only works the first time from cold boot (when the powercable is completly disconnected from the PC, and LAN cable disconnected, turn on PC and then connect LAN cable)
If I shut it it down or restart the computer, then the LAN card disconnects, eg no lights active on either the pc nor the router. But if I do the procedure described above everything works ok again.
Same problem occours with both LAN ports.
My system:
MSI 790FX-GD70
AMD 720BE
4GB Corsair 1600mhz DDR3
2x Asus HD4850 Crossfire
2x Samsung t166 320GB HD
Windows XP SP3
Tried 3 different routers but all with the same error. So everything points towards the motherboard.
Please help.
PearsonDK

Quote from: Fredrik on 09-August-09, 06:19:22
If the LAN-card is disconnected I wonder if the LAN-card is "present" at all. Check Deceive Manager. Please give some PSU info. Problematic booting and falling out devices...
Also, please, what is your BIOS Version? Make sure its 1.4 .
Drivers - have you downloaded the latest ones from MSI's site and installed them for the LAN card?
Man.. is it me, or have there been like 6-7 people coming up with similar LAN issues on this board? I've never known an onboard NIC to have issues.

Connectivity problem with MSI GX60

Good morning, gentlemen,
9 months ago I bought me a Steelseries MSI GX60. Everything was working quite fine, but after four months I started to have complications with my wifi, as it was saying, that I have excellent signal, but I could not load any page. When it happened first, I thought I was not careful enough and caught some sort of virus, so I checked the system with a few programs. For a week let's say everything was fine. Then I had to reinstall the system completely. Today it is the third time that my connection has been slowed or cut off. What to do, I am starting to think it's some hardware complication and not just a virus. Any help? Thank you.

relax. The most common issue that couses writers not be able write at full speed is the DMA setting. Make sure that u have DMA enabled. go to your device manager -->IDE/ATAPI controllers and make sure the IDE channel that your drive is connected is DMA enabled. Also make sure that u have connected your drives as "MASTER" in the IDE bus.
also make sure that the disks u are using are validated for 48x speed. Try using other media brand.
report back

Bizarre networking problem with multiple 8.1 GA systems -- RT and Pro

Hi everyone,
I'm having a particularly bizarre problem with the networking on two Windows 8.1 machines, one running Pro and one running RT. Both demonstrate the same behavior.
In both cases, networking (wireless most of the time, although I'm not sure it matters) works fine for some period of time. Eventually it just stops working. Resetting the adapter, or flipping in and out of Airplane mode will bring it back again. The issues
happen on at least 3 wireless access points. In most cases, the networking actually appears to be up -- the limited access warning icon isn't up, although occasionally it does realize the networking isn't working.
Here's the bizarre part -- on both systems, local IP connectivity is fine. I can communicate perfectly well between devices on the same internal network, wired or wifi. During the time the networking isn't working on one or the other 8.1 system, other systems
on the network running Windows 8 (and other systems) work fine. There's no correlation between one 8.1 system stopping working and the other.
On *both* systems, when the networking appears to be failing, a traceroute actually gets 4-5 (or more) hops before going out to lunch. Other systems on the same internal network will cruise along to the same point on the route that is failing on the 8.1
machines and keep right on happily continuing the trace.
So that's the bizarre thing -- something on two 8.1 machines is doing *something* to the packets that is causing them to not route properly to a target system 10-15 hops away, the same routers handling the same kind of traffic from other systems behind my
firewall work fine, and whatever is happening to the packets that is causing issues resolves itself for some period of time if I reset the adapter. (The two systems are a MacBook Air and a Surface RT, so there's no drivers in common between them, either.)
I'm completely at a loss. Anyone see anything like this before, or have any thoughts on what to check?
(And, please, if you're one of those Microsoft support forum people who skim questions for keywords and cut-n-paste back a generic reply without any actual understanding of the problem -- like so many replies on here -- please do not waste my time. I am
trying to find someone who knows Windows 8.1 networking, not someone who knows just enough English to use ctrl-c/ctrl-v)

Hi George,
There is a known issue about Cisco device. It caused some windows 8 clients disconnected from wifi. I understand your windows 8 clients works fine, when the issue occurred on windows 8.1 clients. However, I think the KB article is worth a shot
http://support.microsoft.com/kb/2749073
Best regards,
Alex Du
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread

Problems with hp laser printing in leopard- wired and wireless

Printing problems in Leopard are slowly eating away at my last nerve!
Here's the background: I have a Macbook Pro 2.33GHz Core 2 Duo, 4GB ram, running 10.5.2. Ever since I upgraded to Leopard, I've been having printing problems, both wired and wireless. I have an HP Laserjet 1160, which is a wonderfully reliable printer- I've had it since 2005 and have never had a problem.
When I installed Leopard, I began getting a popup message after starting up my computer and logging in. The message has a lighthouse icon on it and reads:
"Popup Error: Failed to listen for incoming Popup jobs. You will not be able to use Popup printing for the duration of this session. Please report this incident to a system administrator."
(for the record, I only have one computer, it's not on any system, and I have the administrator account)
Here are the two problems I have:
-First, wired printing is spotty. Half of the time, when I connect the USB cable and click print, nothing prints. Usually, if I unplug the cable and plug it into the other USB port, then printing works. This is in spite of the fact that the computer recognizes that the printer is there- I can delete then re-add the printer to my printer list and still nothing.
-Second, wireless printing does not work at all. Again, the printer is recognized when plugged in to either the time capsule or the airport express, and I can add the printer, but printing doesn't work: the job is sent to the print queue, but the queue stalls on the "connecting to printer" phase.
This problem is a huge pain, and I have no idea how to solve it. Any help is appreciated.
Jon

Thanks for posting this problem Cathjock. I have had the same issue with a NEC Superscript 1400. Thinking it wast he printer, which is getting up there in age, I went out and purchased a new HP P1505 to no avail. I have been researching this for a few days now and think that all of this is related to a user permission in CUPS. I have de-installed, re-installed, re-booted etc as prescribed and got three pages hours after the fact via my Airport Express connected new printer. Generally, however, nothing comes out immediately as was the case in the past either on Airport Express or via USB cable. I am stumped and am starting to get worried.
I can't print invoices for my business and am considering firing up my old Windows machine if you can believe it !
Seriously, Apple has created a monstrous situation with all of htese printing issues and nothing is apparently being done, nothing that I can find in any of the discussion forums at this time.
My last option is to re-install 10.5 with an archive and install as I really cannot afford to start from scratch.
Now if you look at this forum, there are 242,847 views logged with 2,514 questions and 13,848 messages.
This should mean something for Apple as many people need help and are getting really really ******-off.
So pleeeeaaaaase Apple. respond and offer a fix for this problem that is plaguing a ton of people.
Chris

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Upgrading to 6.1.1 hasn't solved the problem with network connection on 4S. Still "No Servise"!

Same here. Everything was fine running on ios 6.0, I don't know what possessed me to upgrade! I contacted O2 and thet went through the usual settings; reboot; airplane mode etc and it works for a while (like 5 mins) then service is losted with the network. I've even deleted the exchange email account and rebooted as read on the internet that this would fix the problem.... guest what....yep no joy! This is clearly a faulty software update and need fixing pronto! I've read that ios6.1.2 will be out soon to fix the firmware that was suppose to fix the initial network problem. When will this be realeased Apple?! It's hardly fit for purpose when I can't make calls or surf the internet.

Network Problems with iOS 6.1 and iPhone 5

I strongly believe that the network connections with iOS6 and my iPhone5 has serious problems. I am experiencing the following issues;
Weak wifi signal at locations where I was enjoying good connection with iOS 6.0.1
Sometime when I enter into a known wifi area, the phone does not connect to wifi automatically. I have to open the Settings App and go to wifi section to get it connected.
Sometimes when I wake-up my phone from sleep, which is sleeping well within wifi range, it shows 3G connection and take some times to get connected to wifi.
I am experiencing fast battery draining when compared to my phone with iOS 6.0.1
FYI, I have already tried resetting my network settings and done hard restarting many times without success.
Please advice any action to solve the problems.
FYI, I have submitted the above to Apple via Apple feedback page.

I am having the same issues with an iPhone 5 and it all started when I upgraded to iOS6.1. I geat a strong wifi signal all 3 bars showing and speedtest shows a 20Mps upload and download connection (I have BT Infinity up to 70Mbps connection), however when I go onto safari or even simplae apps like weather or Sky News I am unable to connect - regularly getting the message "Cannot connect to .... a wifi or 3G connection is required. Occasionally it will work say 5% of the time bit having to switch to 3G and luckily I ahave an unlimited data package but the speeed is really slow ~ 2 Mps. I have searched the web and see that Apple is saying there is a problem with Exchange server getting too meny messages and thus denying access but have followed the guidance given and reset the phone, resey the wifi connection and no change I can only use the phone on 3G. I believe there is a big problem here and Apple need to get a fix out pretty quick. If you read this and have the same issues then please log them so Apple know how big an issue this is. I know it is not a wifi issue as getting great wifi on my iMAC and wife's iPhone 3.
regards
Steve

Help me for msi gx60 destroyer

I have the following problems. Please help!
1: my notebook is msi gx60 destroyer
but vga r9 m290x in gpu-z Is not (gpu clock: 900 - memory: 1250), bandwidth : 160. gb/s
my is in gpu-z --> gpu clock : 950 - memory : 900 !!!
what?!!!!
Please help me and let me take a picture of mine(gpu-z).
2:Contrast is the difference in battery mode when the power cable is connected.
Are you one of the numbers is the contrast of the display is higher battery is bad. What can I do?
I have this problem in Windows 7 and Windows 8.1. The driver is the latest version.
3 : How hard Ssd raid, is how to install Windows? I do whatever I want to install Windows from my driver! Where can I get the drivers?
Thank you

Ok, I got word back from my MSI rep. Apparently, it's a limitation on the RAM that is used for the video card. Other laptops that use the HD8970M or R9 M290X that are not MSI suffer from this as well. This is an AMD goof-up, not MSI's, so don't get mad at MSI. The rep said that they tried to overclock to 1200MHz, but got BSOD's all the time. The rep assures me that the gaming experience is minimally affected (so nothing you'd notice, like 1-2 FPS difference)

Network problem with vodafone in india, noida

network pronlem in my iphone 5 for last 8months, please advise what to do?.

What problem?
Any network problem with your cell phone carrier you need to take up with the carrier.

I just updated my latest java but the update is causing problems with some externale devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device

i just updated my latest java but the update is causing problems with some external devices. So i would like to uninstall this latest java update and get back the previous one. That should solve to problems with my external device.
Is this possible and how do i do that?
Anyone who responds thanks for that!
Juko
I am running
Hardware Overview:
Model Name:          Mac Pro
Model Identifier:          MacPro1,1
Processor Name:          Dual-Core Intel Xeon
Processor Speed:          2,66 GHz
Number of Processors:          2
Total Number of Cores:          4
L2 Cache (per Processor):          4 MB
Memory:          6 GB
Bus Speed:          1,33 GHz
Boot ROM Version:          MP11.005D.B00
SMC Version (system):          1.7f10
Serial Number (system):          CK7XXXXXXGP
Hardware UUID:          00000000-0000-1000-8000-0017F20F82F0
System Software Overview:
System Version:          Mac OS X 10.7.5 (11G63)
Kernel Version:          Darwin 11.4.2
Boot Volume:          Macintosh HD(2)
Boot Mode:          Normal
Computer Name:          Mac Pro van Juko de Vries
User Name:          Juko de Vries (jukodevries)
Secure Virtual Memory:          Enabled
64-bit Kernel and Extensions:          No
Time since boot:          11 days 20:39
Message was edited by Host

Java 6 you can't as Apple maintains it, and Java 7 you could if you uninstall it and Oracle provides the earlier version which they likely won't his last update fixed 37 remote exploits.
Java broken some software here and there, all you'll have to do is wait for a update from the other parties.

Problems with msi p35 neo 2

Default problems with msi p35 neo 2
pc works fine when using windows and the net and emails
only when using 3d mark or games do i ever get problems
just help in getting the hole story 6 months ago got a msi neo2 install all my old components core 2 duo 4 gig ram form a diffrent board works fine but never used it playing games just used for the net and email shoping seamed to work fine but
tryed playing a game 2 months later command and conquer 3 pc was some times freeze or graphics artefacts on screen assumed vga card faulty got another graphics card geforce 8600gts installed still the same in the last month got round to playing with the pc again and installed new g7 780 watt power supply and ati hd 4870 graphics card
now i can use 3d mark some times it will go through once or just freeze or 3d mark stops the test
temps on the board (from msi dual core center temps cpu 33oc system 47oc)
memory voltage 2.1
any one know the settings for the ram
more details you need
System Details
MotherboardEdit Value
msi p35 neo2 fr
Motherboard BIOSEdit Value
latest
CPUEdit Value
core 2 quad 6600
CPU Overclock SpeedEdit Value
none
CPU HeatsinkEdit Value
standard intel that come with cpu
CPU Idle TempEdit Value
N/A
CPU Load TempEdit Value
N/A
MemoryEdit Value
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Memory VoltageEdit Value
N/A
Video Card(s)Edit Value
ati hd4870
Video Card SpeedEdit Value
N/A
Sound CardEdit Value
onboard
PSUEdit Value
g7 780 watt power extreme
Hard Drive(s)Edit Value
mator dimondmax 21
Optical Drive(s)Edit Value
N/A
Other CoolingEdit Value
3 80mm fans 1 frount 1 back 1 side
ModsEdit Value
N/A
Operating SystemEdit Value
windows 7

Quote
******* xms2 2x2 gb ddr2 part no cm2x2048 6400c4dmx
Quote
memory voltage 2.1
Make sure that the memory timings are not set to 4-4-4-x but that they are set to the defaults values (5-5-5-x). Also ensure, that the memory clock speed is not set to anything higher than 400 MHz (=DDR2-800). The voltage at these settings should not need to exceed 1.95V. So please lower it accordingly. In case the freezes still occure, please run memtest86+ to check your memory for errors.
Quote
msi dual core center
Please get rid of that tool for all further tests. Uninstall it completely from your system as it is known to cause crashes and freezes on its own terms when running.

TS1567 i have uninstalled then reinstalled itunes to solve a problem with apple mobile device, but i get this message during the install. Service Apple Mobile Device failed to start. Verify that you have sufficent priveleges to start system services.

I Have reinstalled itunes to solve a problem with Apple mobile support, but during install i get this message. Service 'Apple Mobile, ( Apple Mobile Device ) failed to start. Verify that you have sufficent privileges to start system services. I'd appreciate any help on this.
Thanks bluebanana 66

Hi bluebanana 66,
Thanks for visiting Apple Support Communities.
There are a few reasons why you might receive this message after installing iTunes. You may need to verify that iTunes has been completely removed before trying to install again. See this article for the steps to completely remove and reinstall iTunes:
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
If the error message persists, see the "Additional troubleshooting" section of this article for some steps that can help solve it:
Trouble installing iTunes or QuickTime for Windows
http://support.apple.com/kb/ht1926
Best,
Jeremy

HT4623 How can i solve installation problem with iOS 6.

How can i solve installation problem with iOS 6. I've tried to install it on my iPhone 4 but nothing turned out. Thanks in advance!!!!

can you connect your device to Tiunes and check to see if there are any files in
OSX: ~/Library/Logs/Crashreporter/Mobiledevice/<Devicename>/
Windows: %appdata%\Apple Computer\Logs\Crashreporter\MobileDevice\<Devicename>
specifically named OTA......
Also for the failed itunes restore please attach the contents of the latest log in
OSX: ~/Library/Logs/<iphone or ipod or ipad> updater logs
Windows: C:/User/ Appdata/Roaming/iTunes/<iphone or ipod or ipad> updater logs

How do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

qHow do u get help from apple support with iChat? I was able to chat with support last week to solve my problem but now the same issue is back and I don't see the option to chat now?

For what it is worth I have noticed a similar issue from the iPad3 while at work and home. At work we have two Apple TV 3rd Generation installed and tied to our A/V system. I believe the issue has to do with a timeout on the broadcast saying "here I am" and allowing devices to connect.
For example:
At work we have several Wi-Fi SSID being broadcast from Cisco APs. The only one we can use with the Apple TV is the one that uses a WEP since the others are either setup to be hidden, require web page authentication, or have a login requirement from employees. Essentially, what I believe the issue is that the Apple TV periodically broadcasts a message to other iOS devices that support Mirroring. When the Apple TV does not get a response from a device it goes into a dormant mode and requires either a command from the remote control or a reboot. This has been tested with both the power management enabled and not enabled with the same results.
As for when I come home, the Apple TV3 has not seen the device in some time and therefore is not broadcasting it's location information. A simple click of the circle or menu keys on the remote will give it the command to start broadcasting again and allow the iPad3 to see the Apple TV. When trying to Home Share the computer can not play (iTunes 11, Win8RTM) until the Apple TV is awoken then it will show up for mirroing.
This may or may not assist you but, it hopefully explains how the issue may be happening.

Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the

Good afternoon! I purchased a few months the basics of adobe photoshop package with the CC and Lightroom, but has expired, and was made the annual package. What can I do to solve this problem. I have two weddings being edited and now I can not finish the work. I thank you.

Renew the subscription?

[Solved] Network problems with MSI GX60 Destroyer, killer newtork LAN and wireless

Similar Messages

Maybe you are looking for