[Solved] NetworkManager asks for "default Keyring" password...

Hi there,
when I try to connect to the Wireless Network at my girlfriend's place, I have to set up the network connection myself, as it uses a WEP encyption. After entering the horribly long passphrase, I'm asked to enter another password. The box popping up sais:
"Network Manager wants to access the deafault keyring, but it is locked".
Being new to Linux in general I don't even know what that keyring is, where I can find/set it's password or what to enter. I found a solution for gnome desktops but I'm running xfce4 on a x86_64 architecture. Connecting at my place or at the university is no problem and I'm not asked to enter the password.
Thanks for taking the time to help me.
Neuneck
Last edited by Neuneck (2009-05-25 17:12:34)

I was able to disable the annoying 'feature' whereby the Gnome Keyring keeps asking for a password at login by editing /etc/pam.d/login in addition to the other edits suggested to /etc/pam.d/gdm (http://wiki.archlinux.org/index.php/Net … Kit_issues). I also deleted ~/.gnome2/keyrings. This is especially useful since I don't use gdm to login, rather loggin straight from the shell. YMMV if you use kde or another DE.

Similar Messages

When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat

When I try to combine two pdf's, it asks for a permission password and says the documents are protected; however, I didn't put any protection/security in the documents. I assume it is a default security under the enhanced security settings of the Acrobat Pro XI which I recently purchased.

Acrobat (Pro or Standard) does not apply a "default" protection. It appears that someone or some other process has applied protection.
Be well...

[Solved] System asks for encryption password multiple times

Hey guys,
I have following problem:
I am using dmcrypt for encryption of my hard drive but it seems like I have made a mistake when I installed it. But for the most time I ignored it.
When I start my system it ask for the encryption password normally. The strange thing is that it also asks for the Password when services start.
If I issue a command with systemctl start XXX I also get following message:
Please enter passphrase for disk Crucial_CTXXXXXSSD1 (lukslvm)
There is no problem if I just press Enter and go on actually but this still bugs me.
I wonder what I did wrong at that time.
Edit:
/etc/crypttab:
lukslvm UUID=xxxxxxxxxxx------xxxxxxxxxx none luks
lvm pvscan:
PV /dev/mapper/vgarch VG vgarch lvm2 [223,38 GiB / 0 free]
Total: 1 [223,38 GiB] / in use: 1 [223,38 GiB] / in no VG: 0 [0 ]
Last edited by Erhan (2014-12-17 12:45:53)

Fixed by removing the entry in /etc/crypttab
I don't even remember adding it there but it has been already some years.

SSO Configuration not working - Still asking for Userid and password

Hi Guys,
I have configured Portal to use with backend server. Configured WAS & ITS and created System Alias.
For Testing SSO I did following steps on portal:
System Administration > Support > SAP Appliction > SAP Transaction
Selected system Alias and tcode se12. Selected SAPGUI for HTML. Pressed Go.
Instead of SE12 screen, I get Logon Screen asking for USERID and password.
I should be getting SE12 screen directly without entering USERID and PASSWORD.
I tested with Transaction iView (SE12) and getting the same logon screen. After entering userid/password it displays SAP Easy Access menu instead of displaying SE12
Please help.
Thanks a lot.
mini

Hi Sandeep.
Thanks for your reply. Here are the answers to your questions:
1. Is the username same in the portal and the backend that you are trying to connect, ensure that there is the same username that exists in the system you want to connect to. YES
2. The ticket is imported properly- check the ACL and Certificate list in Tcode STRUSTSSO2.
Ticket is valid from 01 Jan 2009 to 14 Mar 2012.
3. Check for the parameters in place login_accept_ticket = 1 and login_create_ticket = 2 and icm_hostname_full is set to FQDN.
In RZ10 it has 3 parameters:
login/accept_sso2_ticket = 1
login/create_sso2_ticket = 2
icm/host_name_full = sapecc6.tri.com
4. What is the result when you test the system connection?
WAS & ITS Connections are successful.
Connection test for Connectors is giving following results:
Results
Retrieval of default alias successful
Connection failed. Make sure user mapping is set correctly and all connection properties are correct.
My Connectors Details:
Application Host : sapecc6
Gateway Host : sapecc6.tri.com
Gateway Host : 3301
SAP Client : 800
SAP Client : EC7
SAP System Number : 01
Server Port: 3201
System Type: SAP_R3
I am using same userid for Portal and backend.
5. Are the 2 systems that you want to configure SSO in the same domain?
I am trying to connect R3 to Portal.
Please give me directions to fix the problem.

In Yosemite, I can;t operate for more than a few minutes with Keychain or Safari asking for my login password. How can I turn this off, and still be safe?

Using Yosemite, I an't seem to work for more than a few minutes without being asked for my login password. Keychain wants it, Safari wants it, iCloud wants it..the list goes on. Then in 10 minutes or so, they all want it again. Passwords are being stored by Safari as usual, but new tabs or pages bring up the request. How can I turn this off and still have protection?

Tutorial: Resolving Keychain Issues
If you can't access your keychain, or forget your password If you can't get into your keychain file because you've forgotten your password or the keychain file appears to be corrupt, there are a couple of options.
First, if you've forgotten your password, you can use the "Keychain First Aid" utility to make the keychain password the same as the login password. This can be accomplished via the following process:
1. Open Keychain Access (located in Applications/Utilities)
2. Go to the "Keychain Access" menu and select "Preferences"
3. Click the "First Aid" tab
4. Make sure the "Synchronize login keychain password" box is checked
5. Close the Preferences window
6. Go to the "Keychain Access" menu and select "Keychain First Aid"
7. Enter your username and password
8. Click the "Repair" button
The second option is to completely delete your keychain then recreate it. This routine is useful if your keychain appears to be corrupt or otherwise inaccessible. This can be accomplished as follows:
1. Launch Keychain Access (located in Applications/Utilities)
2. Click "Show Keychains" in the lower-left corner of the window.
3. Select the problematic keychain from the left-hand pane.
4. Navigate to the "File" menu and select "Delete Keychain '(name of keychain)'"
5. Check all options for deletion and press "OK"
6. Create a new keychain by going to the "File" menu, then "New" and selecting
"New Keychain"
7. You can now make this keychain your default if you desire by selecting it, then
going to the "File" menu and selecting "Make '(name of keychain)' Default"
Login as root and perform repair In some cases, problems with keychains can only be resolved when logged in as the root user.
First, you want to enable the root user:
1. OS X Mountain Lion: Enable and disable the root user
2. OS X Lion: Enable and disable the root user
3. Mac OS X 10.6: Enabling the root user
4. Enabling and using the "root" user in Mac OS X
After enabling the root user, and logging in under this account, again open Keychain Access. First attempt repairs using Keychain First Aid, and failing that, delete then recreate the keychain as described above while logged in as root.
Persistently asked for stored passwords If you are persistently asked for passwords in various applications that you have specified should be remembered in a keychain, your "login" keychain may not be active for one reason or another.
Navigate to ~/Library/Keychains/ (this is the Library folder inside your user's home folder). Find the file named "login.keychain" and double-click it.
Failing that, select the "login" keychain within the Keychain Access application and make sure it is the default keychain by going to the "File" menu and selecting "Make 'Login' Default"
Turn off Keychain synchronization in applications having problems If specific applications are experiencing issues when accessing password-protected material, the Keychain may be to blame.
The above comes from an article published on MacFixit.com.

I tried resetting my Master Password using "chrome://pippki/content/resetpassword.xul", but when I click on "Change Master Password" it asks for my CURRENT password. I don't have a current password, because I don't remember it and am trying to reset it!

Using FF 4.01 for laptops & desktops, Windows XP 2002 SP3. I used "chrome://pippki/content/resetpassword.xul" to reset the Master Password. Then went to Tools/Options/Security, clicked on "Change Master Password". BUT it asks for my CURRENT password and new password. I don't know my current password. Is there a default Master Password that I need to input as the Current password?

If you still have a Master Password set then it looks that resetting the MP hasn't worked.
If using the chrome url (chrome://pippki/content/resetpassword.xul) doesn't work then delete the files [http://kb.mozillazine.org/key3.db key3.db] and signons.sqlite in the Firefox profile folder.
* http://kb.mozillazine.org/Profile_folder_-_Firefox.
You need to set a new Master Password after renaming or deleting key3.db and all currently saved passwords are lost.

Sharepoint2013 Stop asking for UserName and Password

Hi,
I have Installed New sharePoint2013 Server , I face Issue that Sharepoint Site keep asking for UserName and Password aeach Time.
I set as windows authentication in both IIS and Central Administration ,
and I configure The IE and I set Automatic Login with Current Username And Password and I put it in Trusted site and nothing change.
I also have sharepoint 2010 server and when I configure it like above it
stopped ask me for UserName and Password ,
Can any one help me what maybe the problem in SharePoint server2013.
thank you,,,

Hi,
Try following these steps:
Adding the site to Local Intranet Zone:
Navigate to Tools > Internet Options
Under Security tab, navigate to Local Intranet > Sites > Advanced. Enter the URL of your SharePoint site and click Add. Uncheck theRequire server
verification (https:) for all sites in this zone box and click Close
Adding the entry to the Credentials Manager:
Go to Start > Run and type in control keymgr.dll to open the Windows key manager.
Alternatevily: navigate to Contorl Panel > User Accounts > Manager Windows Credentials
Select Add a generic credential
Add your SharePoint site URL, login and password to the corresponding fields. If this entry already exists, edit it to have your login credentials.
Reboot the computer.
If you are missing the Add button, you may want to modify Windows Registry to be able to save the password.
Note: for editing Windows Registry, administrator rights are required. Editing Windows Registry is not safe and you will perform it at your own risk.
In Windows, go to Start > Run and enter regedit.
Navigate to HKEY_LOCAL_MACHINE\System\CurrentControlSet\Control\Lsa\.
Find the DisableDomainCreds entry. A value of 1 (enabled) will prevent you from saving new credentials.
Change the value to 0 and reboot. Now you should have the Add button available. Note that 0 is the default value.
Also check the LmCompatibilityLevel entry. It should be set to 3, which is the default value. If you have another value, change it to 3. If it does not
work with 3, then also try it with 2.
Reboot the computer to apply changes.
Ref: http://hosting.intermedia.net/support/kb/?id=1668
If this helped you resolve your issue, please mark it Answered

RE1000 asks for username and password

I have the RE1000 installed as extender for my WRT110 router. I was told by Linksys live chat tech that this would be suitable for our home network. When in the family room or on patio (where I have weak WiFi usually), the Extender shows on my iPad in the list of available WIFI and has excellent icon (the router usually has one or two bars and goes in and out).
When I try to access the Extender on my iPad, it asks for username and password but will not take it. Should I run setup again or what?
Solved!
Go to Solution.

in setting up the range extender, it will give you the option to connect to your network. so essentially, you will not have to define/ specify the settings manually. the purpose of the range extender is to extend the signal of the main network, not create a separate network of its own.
i suggest that you RESET the range extender and run the setup wizard again. make sure to connect the device to your network. once the devices have synced up, you will be able to fully utilize this device.

Problem with iWeb asking for username and password to access my public site

Today for some reason anyone trying to access my site is being asked for username and password. I have made no changes that would require a password. My site has always been public.

I am having the same problems. My site is public, I checked the settings on the public folder on MobileMe to ensure that it was public and did not require password protection either. But for some odd reason, even though I didn't change anything, my site's pages seem to require a user name and password to get into them. If one continues to click cancel, the page continues to load.
This does not happen every single time, but it happens more often than not. I have tried this with my iMac, Macbook, as well as my iPod Touch, and I get this on all machines. My brother has tried logging in from another location using his Macbook Pro, and he gets the password prompt as well.
I tried turning on password protection to the site and uploading the changes, then disabling password protection and reupping the changes once again. I've tried uploading entire site, instead of just changes, but the problem continues to persist. I definitely need this issue solved since this site is important to me.
The site url is: http://www.globalwinetour.com
Does anyone have any suggestions to rectify this, or does anyone have any idea what is causing it? Am I missing something here? Am I doing something wrong? Please help me out!
Many thanks in advance!

POP3 -Keep asking for user name & Password

Hi,
We have exchange 2003 server with Service pack 2. We have user who check their mails through Outlook 2003, Outlook web access & some users are using POP3 to download the messages.
Since last few weeks, we are getting the complained that when engineers are trying to configured users account in Outlook with POP3 configuration, its keep asking for user name & password. But with same user name & passwords user is able to check their mail through Outlook web access.
In some of our site, users are able to download messages through pop3 account but this account was configured long back.
Kindly advise.

HI,
This is happening mainly when
1. user changed his password through Outlook web access next time its keep poping up for password & it will not accept the new passord.
2. if user is using OWA & when we try to configured his mail in Outlool with POP3 .
See if i remove exchange attributes from user's account & then delete the users from AD & Recreated with same user name, Password & reconnected to that user to his old mailbox, it;s work fine.
Regards,
Chetan
POP3 is enabled by default for all the users.

New Imac. I get rid off login password from security and account and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

New Imac. I get rid off login password from security and accounts and restart. Now it asks for username and password and it's not acepting anything. Any ideas?

First, reset your password as follows.
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select  ▹ Restart from the menu bar.
You should now be able to log in with the new password, but you won't be able to unlock the Keychain. If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it. You’ll need to reset your keychain in the preferences of the Keychain Access application.
If you're being prompted to authenticate when making changes to files inside your home folder, continue as follows.
Back up all data now.
This procedure will unlock all your user files (not system files) and reset their ownership and access-control lists to the default. If you've set special values for those attributes on any of your files, they will be reverted. In that case, either stop here, or be prepared to recreate the settings if necessary. If none of this is meaningful to you, you don't need to worry about it.
Step 1
Launch the Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Terminal in the icon grid.
Drag or copy — do not type — the following line into the Terminal window, then press return:
sudo chflags -R nouchg,nouappnd ~ $TMPDIR.. ; sudo chown -R $UID:20 ~ $_ ; chmod -R -N ~ $_ 2> /dev/null
Be sure to select the whole line by triple-clicking anywhere in it. You'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning. If you don’t have a login password, you’ll need to set one before you can run the command.
The command will take a noticeable amount of time to run. Wait for a new line ending in a dollar sign (“$”) to appear, then quit Terminal.
Step 2
Boot into Recovery by holding down the key combination command-R at startup. Release the keys when you see a gray screen with a spinning dial.
When the OS X Utilities screen appears, select Utilities ▹ Terminal from the menu bar. A text window opens.
In the Terminal window, type this:
resetpassword
That's one word with no spaces. Then press return. A Reset Password window opens. You’re not going to reset a password.
Select your boot volume if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Under Reset Home Directory Permissions and ACLs, click the Reset button.
Select  ▹ Restart from the menu bar.

WebService Publication asks for user and password

Hello,
I have a WebService with No Authentication.
The problem is that when I try to open the WSDL in the WebBrowser SAP asks for User and Password of the WebAS.
I have tried to Consume the WS through a 3rd application and when I try to consume it user and password is needed and the WS has no authentication.
I have read this topic:
Roles for SOAMANAGER
And the basis guy told me he has already done that configuration so If you know how to solve this problem I will be very grateful if you post it.
Thanx in advanced.

Hi,
SAP Web Application Server requires a username and password. This makes sense. Even if your web service is has No Authentication, you still have to access the server.
How to bypass this.....
Try reading the link given above.

Why does my iPad keep asking for my iCloud password?

My iPad gas started asking for my iCloud password all the time since downloading 12 days of Christmas app which included 2 free downloads of a song And a video these didn't download correctly and are not stuck in limbo can't get them to finish downloading or delete them and i am frustrated about having to constantly enter my iCloud password I have entered it 15 times while typing this 16 now!!! Help

Some people just solved the problem by deleting the account from the device for a moment "Settings > iCloud > Delete Account" and then added it back again.

I cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

i cant install the new firefox 6 on my laptop because it keeps asking for the administrator password during the installation and i dont know what is it for this laptop

I read a way on another forum to fix this problem. Right click on the setup.exe and select "Run as administrator" this should solve your problem.

Why is my phone asking for a CISCO password?

Hi,
My Mom is suddenly having an issue with her phone and wi-fi connectivity, it's connecting to her 'guest' network instead of her default and in doing so asking for a CISCO password in order to access the web. (screen shot below)
I've done some basic troubleshooting but I can't seem to get it to connect properly.
I've tried just telling it to connect to the right network but it gives me a 'cannot connect' message without even asking for the password.
Does anyone have any advice on how to make it stop asking for a CISCO password? I am simply trying to connect to our basic home wi-fi network.

Hello SEC4184,
I was looking into the issue you are experiencing, and found this article that may be helpful to you named iOS: Troubleshooting Wi-Fi networks and connections found here: http://support.apple.com/kb/ts1398.
Basic troubleshooting
Tap Settings > Wi-Fi and turn Wi-Fi off and then on again.
Verify that you are in range of your Wi-Fi router or base station.
Confirm that your Wi-Fi router and Cable/DSL modem are connected to power and turned on.
Check whether other devices (portable computers, for example) are able to connect to the Wi-Fi network and access the Internet.
Update your Wi-Fi router to the latest firmware.For AirPort Base Stations, refer to this article for information about firmware updates. For third-party Wi-Fi routers, check the manufacturer's website for details on updating your firmware.
Restart your iOS deviceHold the On/Off button until "slide to power off" appears. Slide to power off your device. When it is off, press the On/Off button to turn it back on.
If you're unable to join a nearby Wi-Fi network
Try restarting your Wi-Fi router by turning it off and then on again.
Note: If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
When joining an 802.11n Wi-Fi network, ensure that your router is properly configured. See this article for more information.
Reset network settings by tapping Settings > General > Reset > Reset Network Settings.
Note: This will reset all network settings, including passwords, VPN, and APN settings.
All the best,
Sterling

[Solved] NetworkManager asks for "default Keyring" password...

Similar Messages

Maybe you are looking for