[Solved] NetworkManager does not connect wlan interface to my WLAN

Hi,
I don't know what I am missing. Connecting to my WLAN using wifi-menu does work fine. But if I try to use nm-applet it doesn't connect (see journalctl below)
I use i3 as a GUI and enabled its tray. I can see the nm-applet but its loading forever without connectivity.
Mar 29 14:03:19 <hostname> NetworkManager[3024]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) scheduled...
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) started...
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) scheduled...
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 1 of 5 (Device Prepare) complete.
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) starting...
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: prepare -> config (reason 'none') [40 50 0]
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0/wireless): connection '<My ESSID>' has security, and secrets exist. No new secrets needed.
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'ssid' value '<My ESSID>'
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'scan_ssid' value '1'
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'auth_alg' value 'OPEN'
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: added 'psk' value '<omitted>'
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Activation (wlp3s0) Stage 2 of 5 (Device Configure) complete.
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> Config: set interface ap_scan to 1
Mar 29 14:03:19 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: inactive -> scanning
Mar 29 14:03:22 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:22 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:22 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
Mar 29 14:03:22 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> scanning
Mar 29 14:03:26 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:26 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:26 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
Mar 29 14:03:26 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> scanning
Mar 29 14:03:29 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:29 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:29 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
Mar 29 14:03:30 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> scanning
Mar 29 14:03:34 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:34 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:34 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
Mar 29 14:03:39 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> scanning
Mar 29 14:03:42 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:42 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:42 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: scanning -> disconnected
Mar 29 14:03:44 <hostname> NetworkManager[3024]: <warn> Activation (wlp3s0/wireless): association took too long, failing activation.
Mar 29 14:03:44 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: config -> failed (reason 'SSID not found') [50 120 53]
Mar 29 14:03:44 <hostname> NetworkManager[3024]: <warn> Activation (wlp3s0) failed for connection '<My ESSID>'
Mar 29 14:03:45 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: failed -> disconnected (reason 'none') [120 30 0]
Mar 29 14:03:45 <hostname> NetworkManager[3024]: <info> (wlp3s0): deactivating device (reason 'none') [0]
Mar 29 14:03:48 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=2)
Mar 29 14:03:48 <hostname> NetworkManager[3024]: <info> (wlp3s0): supplicant interface state: disconnected -> inactive
Mar 29 14:04:05 <hostname> systemd[1]: Stopping Network Manager...
Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> caught signal 15, shutting down normally.
Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (enp0s25): device state change: unavailable -> unmanaged (reason 'removed') [20 10 36]
Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (enp0s25): cleaning up...
Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (enp0s25): taking down device.
Mar 29 14:04:05 <hostname> kernel: e1000e 0000:00:19.0: irq 45 for MSI/MSI-X
Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (wlp3s0): device state change: disconnected -> unmanaged (reason 'removed') [30 10 36]
Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (wlp3s0): cleaning up...
Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> (wlp3s0): taking down device.
Mar 29 14:04:05 <hostname> kernel: wlp3s0: deauthenticating from <MAC address> by local choice (reason=3)
Mar 29 14:04:05 <hostname> NetworkManager[3024]: <info> exiting (success)
I would be really glad if you could help me.
Best regards,
Christian
Last edited by Watnuss (2013-03-29 13:58:40)

Watnuss wrote:Ok I found the issue. net-auto-wireless was started automatically and thus NetworkManager couldn't be started properly. Disabling net-auto-wireless and enabling NetworkManager worked for me.
Don't worry, I have done this before too.  It is horribly frustrating until you realize the problem, at which time I always think, "Ah crap, I need to pay attention to what I'm doing more..."

Similar Messages

  • [SOLVED] NetworkManager does not connect to WiFi networks

    I'm using `networkmanager` to connect WiFi.
    I have selected WiFi Name through `networkmanager`.
    Next, enter WiFi Password.
    But the problem is, `networkmanager` asks me about password again and again and over again and does not connect to WiFi never !!!!
    I'm sure WiFi password that I entered is correct.
    Last edited by kamrava (2014-02-22 05:46:37)

    orschiro wrote:Maybe not satisfying, but can you instead use Wicd?
    My problem was solved. `wicd` was not installed on my system.
    My Problem solved through :
    I have Installed `wicd` and then NetworkManager works like a charm now
    $ sudo pacman -S wicd wicd-gtk
    Thank you all.
    Last edited by kamrava (2014-02-21 11:29:17)

  • Hello my iPhone 4 does not connect to the internet anymore(wlan still works) but it still shows the 3G symbol. I have that problem since ios 5.1

    Ich still shows the 3G symbol but I cant connect to the internet anymore. Since ios 5.1 it disconnected every 30 minutes untill i restarted. De- and reactivating the mobile internet  never helped. Now i dont get a connection. It quite not works.
    I never had problems untill ios 5.1
    of course apn,  username and passwort for the carrier are correct.
    My carrier is simyo
    (im in germany)
    Thank you for helping me

    Hi Damien,
      Thanks for your reply.
      I had not created 2 separated wireless network. The airport extreme has had create wireless allowing it to be extended and the airport express has had it to extend since day 1.
      The only device that does not connect to the airport express when it is far from the airport extreme here is the iPhone 4. I've tested 2 Windows based computers, 2 Macs, 1 Samsung TV and 1 Android phone and they all are able to connect to the airport express when the signal from the airport extreme is weak (please take a look on the screen shots on the original post).
      The screenshots of the 2 devices' wireless set up can be found below:
       Airport Extreme
      Airport Express
        I have seen other people here on the Apple discussions complaining about the same issue with their iPhone 4 and iPad: would it be a iOs problem?
    Regards
    Gilson

  • [SOLVED] NetworkManager does not work properly

    I have invoked systemd-networkd. But when I start NetworkManager, the ip address is lost and the connections (both wired and wireless) displayed on NetworkManager try to connect for a while then automatically closed. It seems there are some conflicts. I want to use NetworkManager because within Gnome Desktop environment, it is convenient to manager network connections. Have anyone ever encountered this problem?
    Last edited by archzhengwei (2014-07-14 02:57:07)

    qinohe wrote:
    @cris9288, I have them both working at the moment 
    @archzhengwei,I my case, 'systemd-networkd' is only started for systemd-timesync and not configured, maybe that helps you.
    Interesting. Usually multiple network services will prevent each other from working, but it sounds like systemd-networkd serves other purposes. Good to know!

  • [solved] NetworkManager does not see the wifi channel 13

    Hello!
    I have a problem that NetworkManager did not see the wifi network, which broadcasts on channel 13. How to install the drivers for the network to be visible?
    Last edited by ghsaehas (2015-01-18 16:57:39)

    Install and configure crda:
    https://www.archlinux.org/packages/core/x86_64/crda/
    http://wireless.kernel.org/en/developer … atory/CRDA

  • [solved] NetworkManager does not store Eduroam password

    For some reasons NetworkManager (used in a Cinnamon session) is not storing my password of my Eduroam account.
    This is how the interface looks like: http://i.imgur.com/dL3QwOk.png
    Whenever I am typing in my Password and click on Save, the next time I open the interface again, I have to retype in the password.
    I set up NetworkManager by installing the following packages and activating the NetworkManager.service file.
    [orschiro@thinkpad ~]$ pacman -Q | grep network
    glib-networking 2.38.1-1
    network-manager-applet 0.9.8.4-2
    networkmanager 0.9.8.8-1
    networkmanager-dispatcher-crashplan-systemd 1.0-2
    networkmanager-dispatcher-dropbox-systemd 1.0-1
    networkmanager-dispatcher-ntpd 1.0-6
    networkmanager-openvpn 0.9.8.4-1
    networkmanager-pptp 0.9.8.4-1
    Could anyone give me a hint what may be causing this issue?
    Last edited by orschiro (2014-01-15 19:35:08)

    @Strike0
    I tried this already. It doesn't change anything. These are the logs:
    [orschiro@thinkpad ~]$ sudo systemctl status NetworkManager
    NetworkManager.service - Network Manager
    Loaded: loaded (/usr/lib/systemd/system/NetworkManager.service; enabled)
    Active: active (running) since Fr 2013-10-25 17:01:12 CEST; 22h ago
    Main PID: 455 (NetworkManager)
    CGroup: /system.slice/NetworkManager.service
    └─455 /usr/bin/NetworkManager --no-daemon
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <info> Activation (wls1/wireless): access point 'eduroam' has security, but secrets are required.
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <info> (wls1): device state change: config -> need-auth (reason 'none') [50 60 0]
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <info> Activation (wls1) Stage 2 of 5 (Device Configure) complete.
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <warn> No agents were available for this request.
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <info> (wls1): device state change: need-auth -> failed (reason 'no-secrets') [60 120 7]
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <info> NetworkManager state is now DISCONNECTED
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <info> Marking connection 'eduroam' invalid.
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <warn> Activation (wls1) failed for connection 'eduroam'
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <info> (wls1): device state change: failed -> disconnected (reason 'none') [120 30 0]
    Okt 26 15:01:07 thinkpad NetworkManager[455]: <info> (wls1): deactivating device (reason 'none') [0]
    Could it be an issue because I am launching cinnamon through cinnamon-session in xinitrc instead of a display manager?
    Furthermore, I only have installed gnome-keyring but do not start it explicitly. However, shouldn't it also work without gnome-keyring or is it a required dependency for NetworkManager?
    Last edited by orschiro (2013-10-26 13:05:09)

  • [SOLVED] NetworkManager will not connect to Mobile Broadband (o2)

    I cannot get Networkmanager to connect to mobile broadband (o2).
    Everything works fine if I open a terminal, do "sudo wvdial o2", minimize it, and then open Firefox.
    Networkmanager (nm-applet) shows the connection to o2, but if I select it, it just instantly responds with "Network Disconnected". I have checked the settings for the mobile broadband connection, and they are the same as in wvdial.
    I have also tried logging in as root, and tried from there, but I still get the same resuilt.
    I would be very grateful for any help with this problem.
    Last edited by myrlin (2011-03-17 20:00:29)

    As if by magic, the latest updates have solved the problem. I've no idea how, but everything is now working perfectly.
    Thanks to everyone who has taken the time to think about this problem for me.

  • My FaceTime is active but it does not connect. Any one know what is wrong with it or how to solve the problem?

    My FaceTime is active but it does not connect. Any one know what is wrong with it or how to solve the problem?

    Please sign out of FaceTime and sign back in. If there's no change, log out or restart the computer and try again.

  • Carrier issues, Iphone 3gs: Carrier is in the carrier list but does not connect = no service

    Right introduction, I live in the country signal for iphones under 02 in my area is 3-4 bars of GPRS signal. This is plenty to make and receive calls, texts and all that as use home wifi for internet simple. Everything working fine for about a year of having the phone, then did updates and started to see the "no service"  almost all the time and had to place my iphone in a signal spot just to get 1-2 bars and couldn't touch it without dropping out! Basically I could not use it at all and the crap about the signal now showing true signal is rubbish as before i could make calls fine and no drops, but now due to "no service" i can't make any calls or texts or anything. I have a ipod touch when nothing HAS CHANGED other than i can think when the update to 4.0 came along! I have been living with this for almost a year. I have done every possible solution, apple stores, 02 stores, new sim cards (many), every type of phone resetting possible, manually turning off 3g and other settings to turning everything off bar just basic GPRS signal. Network resets everything possible no joy what so ever.
    I have been paying for a year now for a phone that i can't use anywhere other than right next to a signal tower! Yes the phone connects to GPRS, EDGE, 3G when in town but just about. Before these problems i could get max 3G signal in my local town no issues but now struggle to get 1 bar of 3g in a town as well. The problem is I used to be able to use my phone as a phone where i needed to use the phone. Now i can't use the phone anywhere and get drop calls all the time when i do manage to get signal!!!!!!!
    Now i can't even connect to 02, yet at home under a manual carrier search all UK networks appear on the list including 02, I click on 02 and it comes up with the warning "network lost see settings" So my phone CAN find signal but does not connect to 02. This has been the case for a long time now and as stated before several sim cards latter and plenty of trips to apple and changes of phone make NO difference which makes me believe this is a software issue on apple's part. I only started getting these issues when the iphone 4 came out and updated the ios. Now what can i do, i can not downgrade the ios as i never jailbreaked my phone so don't have the files stored that i should to be able downgrade. Apple are offering 0 help with this, all i want to do is smash it to bits as it no longer works as a phone. I have to use a 10 year old nokia to call and actually use my contract that I PAY FOR. I PAID FOR MY PHONE and just after the warranty runs out as well and it seems all a software problem.
    I have searched all over the net to find no solutions to my problems this is a last resort before i do actually smash the thing and I love apple to bits but come on a simple software issue.
    I mean isn't it silly that i can't downgrade my ios and that apple don't support this and yet my issue seems to lie in there update.
    I know that the signal update reworked the algorithm to show true signal XXXXXXXXXXXXXXX um no it doesn't as now i have 0 signal as before i had no problems what so ever with dropping calls and the signal showing right so WHY WHY WHY.
    Please help I am so frustrated with things and need to solve this issue. Please ask anymore questions if you want more details about anything, i need to sort this out please.
    By the way i am running ios 4.3.3 yet bellow in the options this is not stated?? I have been updating hoping that it gets solved but only seems to get worse the more i update.
    Thanks
    James
    Thanks
    James

    Same problems, unfortunatley I updated to 5.0 1 hour before going on holiday for three weeks and no way to restore my phone to try to remove it.At the same time, drop outs, range problems and the most annoying was my music and apps were corrupted and would not function properly :-(

  • The KitKat upgrade has been a disaster. home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In atte

    My home wireless is no longer recognized, even going through the set-up process.  It does not connect to the car through Bluetooth seamlessly--I have to add my phone as a new device each time I get in the car.  In attempting to solve these problems I have gone to settings-phone-upgrade and it states that the upgrade is available-select to continue-(which I do)- it checks -please wait and it then states that update not available - try later.

    Maybe not too late to help you.
    For specifically fixing the Bluetooth, un-pair your phone with the car, and go through the process of repairing the two.
    In general, the KK update requires many of us (different phones) to perform a Factory Data Reset after we back up our personal content (pictures, music, movies, or other downloaded files) to a PC or MAC. This will result in you having to do a bit of work to setup icons for the programs you use, and maybe putting in the specifics again for email accounts and other specialized apps. So if you are going to do this sort of thing... copy important information/settings down on paper.
    HTH.

  • [SOLVED] Empathy does not work after gnome upgrade

    Hey there,
    I have upgraded gnome from 2.26 to 2.28. Almost everything is perfect (in fact apps start faster than before) but empathy does not connect to msn or any other protocol.
    Any help would be appreciated.
    Tks
    Last edited by mmf1902 (2009-10-17 17:48:07)

    mmf1902 wrote:
    So now we have solved the problem:
    + I deleted all hidden folders and configuration files that belongs to empathy and telepathy
    + I deleted the mission-control folder
    And that's it. Everything is ok.
    Gracias mil.
    don't forget to mark the topic as solved
    p.s. did you check the permissions or did you just remove the files? for other people with the problem, you know.

  • I have a ipad 2 and it does not connect with safari using 3G

    I have a ipad 2 and it does not connect with safari using 3G

    Sorry to hear you are having issues, but there are 2 ways you can print from that device.
    The first one is to simply email photos or documents to your printers email address by attaching them to a new message.
    The other option is to download the HP ePrint Home and Biz app from Google Play. The app is free and should allow you to print pictures and documents to the printer with ease. I have added a link below on how to get started with this app.
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c01616126&lc=en&cc=us&dlc=en&product=3857218
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • Bug typedef does not connect to expression node

    Attached is a simple vi that tries to connect a typedef (in this case a double) to an expression node.
    Since LV8 this is not allowed anymore.
    We choose LabVIEW because it was possible to use it as a strict typed language. (one of the reasons).
    We see that the developers go a long way to make the language so easy that it is too strict to allow typedefinitions to an expression node.
    But it can also be a slip of the compiler of course.
    attached are the example vi and the typedef.
    please supply a patch because this makes it impossible for us to switch to LV8
    greetings from the Netherlands
    Albert Geven
    greetings from the Netherlands
    Attachments:
    typedef does not connect to expression node.vi ‏7 KB
    dbl typedef.ctl ‏5 KB

    A workaround is easy but should not be necessary because the typedef is used to keep it a typedef.
    Simply use an explicit type conversion in this case to [DBL], at least that was my guess....
    but an explicit conversion already knows there is nothing to do so it does not help.
    A typecast helps but sure that is not what I want, see picture below.
    greetings from the Netherlands
    Attachments:
    typedef bug not solved by explicit conversion.JPG ‏5 KB

  • My Z10 does not connect

    Hi Z10 does not connect to my system Win7 Link is downloaded and it shows my z10 as connected but it does not allow me to sync it keeps asking for reconnect/reload i tried reloading few times none works i need help i am getting frustrated with this

    Please review this thread: 
    Blackberry Link
    and the questions asked, especially my last post in that thread with the three linked KB articles.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    My iMac does not connect to internet via wireless after I log in. I have to open network preferences and run the assistant everytime to make it work. Its a new system, updated to Mountain Lion,.

    Hi, this has worked for a few...
    Make a New Location, Using network locations in Mac OS X ...
    http://support.apple.com/kb/HT2712
    10.7…
    System Preferences>Network, top of window>Locations>Edit Locations, little plus icon, give it a name.
    10.5.x/10.6.x/10.7.x instructions...
    System Preferences>Network, click on the little gear at the bottom next to the + & - icons, (unlock lock first if locked), choose Set Service Order.
    The interface that connects to the Internet should be dragged to the top of the list.
    Instead of joining your Network from the list, click the WiFi icon at the top, and click join other network. Fill in everything as needed.
    For 10.5/10.6, System Preferences>Network, unlock the lock if need be, highlight the Interface you use to connect to Internet, click on the advanced button, click on the DNS tab, click on the little plus icon, then add these numbers...
    208.67.222.222
    208.67.220.220
    Click OK.
    Also, turn off IPv6:
    System Preferences » Network » AirPort » TCP/IP tab » Configure IPv6
    Or whatever Interface you use.

Maybe you are looking for

  • SSO and reports security

    Hi, Does anyone know how to suppress the SSO and reports authentication when we run reports from either Oracle Forms or URL - by using the standalone/custom report server? Whenever we call reports from Forms or URL, the login page comes up. Thanks. A

  • Using a Circle object which has been created outside a Group

    Hi all! I have one trouble: I create a Circle object outside a Group object. I trying to use th Circle in the Group and I have got compilation error. It's my code: * testfx.fx * Created on 24.03.2009, 21:19:00 package testfx; import javafx.scene.effe

  • Project ipad to tv

    Just as title says, I have 2 70 inch tv and an iPad Air I would like to project the screens of my apps I play to the tv while still using the IPA...it's actually to allow my dad to play racing games on the tv via the ipad. Wireless option would be be

  • Table column and table name

    Hi Experts, I just want to ask is there any procedure to know the table name and the corrosponding column name when you have only data with you. Suppose you have a string say "India". Now i want to know the name of the column and corrosponding tablen

  • T.code CK55 Node is missing in std SAP tree

    Hi, T.code CK55 used for multiple sales order costing, it is available in sap command filed but it is missing in sap standard Tree node could u help us. some of components we are not activated how to find such component Regards Vinu