[SOLVED] New install does not see SSD drive

Ok, I have a DFI motherboard which at first did not recognize my new Intel SSD drive I have installed. After updating the BIOS, it now correctly recognizes it. However when I run the 2009.2 cd and try to prepare the drives, it does not show any drives listed?
/sbin/fdisk -l
does not show any drives either so it looks like arch cant see any installed HD's which makes since, but the motherboard does show the new Intel SSD as a Sata drive right under my DVD player?
Any help?
Edit: I hooked up my old Seagate drive and it shows up fine. Any idea on why this SSD is not playing nice?
Solved: I have come to the conclusion this has nothing to do with the Arch install, but is simply a hardware issue with my motherboard. I installed the SSD drive in my wifes pc, it seen the ssd as a sata drive while booting, it seen it when arch was initializing, it seen it when I did a fdisk, and when i finally tried to install, it was there too!!
So there must be some issue with my old DFI MB. I will work on that or upgrade..Thanks to everyone who helped out...
Last edited by banshee28 (2009-02-28 16:48:07)

lilsirecho wrote:
I had trouble with my throttle device not making contact with the data lines when connected to USB.
I assume the SSD has the same connector as the motherboard and the cable can be reversed end to end to test for performance.
I use a multimeter to verify the presence of power to the device.
Sata cables are known to be flaky.
Throttle devices use 5vdc power from USB connector and are connected to esata cables at the same time since sata ports do not supply power. The connections for throttle are on opposite ends of the device.
I am not familiar with the SSD power setup but assume it is 5vdc as well.
No other suggestions here..................
Yes, the cable should be able to be reversed as the ssd drives are identical compared to normal sata drives in respect to the cable connections: one sata data connection and one power. I will try some different cables and see if that helps. I did try a new port on the mb which did not work, and when i used the current cables on my older seagate drive it worked fine
Last edited by banshee28 (2009-02-26 13:15:52)

Similar Messages

My new mac mini does not see usb drives, but in hardware info the usb is visible

my new mac mini does not see usb drives, but in hardware info the usb is visible
i'tried several usb flash drives even brand new ones, they are visible onder hardware info but they are not on the desktop nor in the finder.
what is wrong and doe anyone has a solution ?

It does not show up in disk utility, its only visible through systeminformation.
When you plug in the USB flash drive and then refresh systeminformation it becomes visible.
To remove it I shut down the computer because I cannot eject the USB device anywhere.
After starting up again when I have removed the flash drive it has gone from the systeminfo USB list.
By the way my USB mouse and keyboard are working fine, I also changed ports of these and they still keep on working so I don't think the USB ports are defect.
I guess it some kind software problem, and because I'm new to Apple I do not know much about it how to solve this.

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be ab

Hi, please help with the installation of Lightroom 4, I bought a new Mac (Apple) and I want to install a software that I have on the album cd. My new computer does not have the drives. Can I download software from Adobe? Is my license number just to be able to download the srtony adobe.

Adobe - Lightroom : For Macintosh
Hal

I have adobe acrobat 9 on cd. new computer does not have cd drive. how do i install? thank you

I have adobe acrobat 9 on cd. New computer does not have cd drive. How do i install? Thank you

Hey ems6,
You might need to copy the installer to the USB disk on another computer.
Hope that helps.
Regards,
Anubha

Windows 8 does not see hard drive on Satellite A200

Windows 8 does not see hard drive on A200.
How to install?

> with Vista works fine,
Does this mean that Vista is still installed or is HDD visible while Vista installation setup?
Some notebooks HDD controller needs SATA driver in order to be able to install system.
Sat A200 is a little bit older but I dont think the SATA driver is needed here to install Win 8.
I guess you didnt any SATA drivers to install the Vista right?
Set the BIOS to default and try to boot again using Win 8.

I have a new mac, i want to transfer my photoshop elements, but the new mac does not have a drive?

I have a new mac, i want to transfer my photoshop elements, but the new mac does not have a drive?

Transferring does not work, you need to install using installation files. Downloadable versions can be found at the following linked pages...
PSE 10, 11, 12,13 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html
PSE 7, 8, 9 - http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-7-8-9-downloads.html

How do I (re)add a device? New iTunes does not see an iPad or IiPhone.

How do I (re)add a device? New iTunes does not see an iPad or IiPhone.

Go here and download and install iTunes on your PC
http://www.apple.com/uk/itunes/download/

Win7 install does not see new hard drive (640gb Samusung) on MacBook Pro

Replaced MBP 5,4 (mid 2009) hdd with a Samsung HM641JI 640gb drive. OS X installation went fine using SL install disk, updated software to 10.6.4. Problem is with Windows 7 installation using Boot Camp. Partition is created (tried 32 to 300 gb). Windows 7 install disk loads but after "Install now" and accepting license agreement, it does not recognize the drive or any partitions. XP install works fine. Had same Win7 problem with 2 identical hdds and 3 different install disks which were full version, not upgrades. Installed Win7 using boot camp on 320 gb Samsung drive (also 3.0gb/s SATA) without a problem. Tried formatting the bootcamp partition on the 640 gb drive to NTFS, but still not recognized. Any suggestions?

Odd you can't see anything. I'd use Windows 7 recovery tools to do a full initialize and map out bad blocks if necessary. Or initialize from OS X drive and then do full slow format etc from Windows DVD.
Every drive vendor has their own linux/dos/windows utility to recertify and test sectors and does a better job than anyone else's. WD Lifeguard for all my WD drives, can be very handy.

New Airport Extreme (2014) does not see USB Drive

Just fired up my new 2014 Airport Extreme and attached a Toshiba 3 TB USB Drive. My new (late 2013 iMac) does not see the new drive in Disk Utility.
The Extreme works in all other ways; ie, as a router, as a wireless node.
It came to me formated as a Windows drive, so I attached it directly to my MacBook Pro (which saw the drive) and reformated it as a Mac Drive (Journaled, GUILD). It showed up just fine on the MacBook Pro desktop.
When I reattach it to the Airport Extreme, it still does NOT show up in Disk Utility on the iMac.
Help Please

When I reattach it to the Airport Extreme, it still does NOT show up in Disk Utility on the iMac.
That drive will not show up in Disk Utility on the Mac.....since the Toshiba hard drive becomes a network drive when it is attached the AirPort Extreme.
Disk Utility will not display a network drive. It will only display drives that are connected directly to your iMac via USB, FireWire, etc.
Check using AirPort Utility to see if the AirPort Exteme recognizes the drive.
Open AirPort Utility, click the AirPort Extreme icon, then click Edit
Click the Disks tab at the top of the next window that appears
The drive will appear here if it is recognized by the AirPort Extreme.
In the example below, my WD Drive is connected to the USB port on the AirPort Extreme.

Windows 8.1 Setup DVD does not see SSD

Windows 8.1 Enterprise x64 Setup DVD does not see Samsung SSD 840 Pro so cannot install Windows 8.1. The same SSD disk currently does have Windows 8 Enterprise and runs fine on the same laptop. Checked the Dell BIOS does see the SSD. Loaded the
latest drivers from the Dell website but did not help. Tried changing the BIOS settings from SSD to ACHI. When in setup did the SHIFT+F10 to run the DISKPART clean the partitions.
How do I troubleshoot why the Windows 8.1 Enterprise setup disc cannot see the SSD?

Hi,
According to your description, I would like to confirm if you can see SSD under the Diskpart.
If you can see the SSD under the Diskpart,I think it is related to the installation DVD.
I suggest we use a new installation DVD to test it.
Also, you can create a bootable USB flash drive, and then use the USB flash drive to install Windows.
Keep post.
Regards,
Kelvin hsu
TechNet Community Support

G4 disk utility does not see hard drive

I am helping someone with a G4 Quicksilver. She is running 10.4 but only has disks for 10.1 and 10.2. When I boot with the 10.2 CD, disk utility does not see the hard drive. I was thinking of connecting her computer to my MacBookPro (Intel, 10.5) via target disk mode and then running Disk Utility. Is that crazy? She is suffering from slow startup and grey screen. I've disconnected the periferals, safe booted, reset PRAM. She really needs Disk Utility.

with the 10.2 CD, disk utility does not see the hard drive.
Disk Utility from 10.2 should see the hard drive (the drive name should appear in the left box). If it does not, the drive is malfunctioning or has a loose cable.
If you attempt to Verify, it will complain that there are illegal values in reserved fields in several different record types. Using this older Disk Utility to repair a 10.4 disk may cause more problems than it solves.
As Tom \[Texas Mac Man] says, you should only repair 10.4 and later disks with 10.4 and later Disk Utility:
HT2648- Only use Mac OS X 10.4-compatible disk utilities with Mac OS X 10.4 volumes
• If you boot the regular Hard Drive (no CD/DVD required) while holding down the Shift key, it will do a quick check of the Hard Drive, then boot up in "Safe Mode". This will fix any simple Disk problems.
• 10.4.3 and later can do a Disk Utility Verify of the Boot drive, "live" (but cannot Repair "live").

HP Notebook 9628nr does not see DVD Drive no optical drive in device manager

for some reason it does not see the dvd drive this happen after I flash the bios which was recommended from the HP website can anybody tell me how to fix this problem

Im having a problem like this, DVD not appeare in my computer and system devices, after that a webcam will broken also( unknow device USB); solve: damaged motherboard, one of bridges- north probably
regards
and watch your motherboard properly

Installer does not see hard drive, how do I mount

Initialized Hard Drive with current volume and as mac extended and zero'd out memory. This drive came out of a PC that had been out of whack and drive was partitioned wrong in the PC. It worked fine to load mac OS 9.2.2 and has 18 gigs free. When I boot off of the Tiger disc it does not see the hard drive at all. Neither does the disc utility function. I checked the firm ware and it is up to date. Ran disk warrior and it says all is ok. Is it something simple?
I can't figure out what it is I have over looked. Thanks

Try this instead:
1a (If this is the startup drive.) Boot from your OS X Installer Disk. After the installer loads select Disk Utility from the Installer menu (Utilities menu if using Tiger.) Be sure to use the installer disk for the version of OS X you intend to install.
1b (If this is a non-startup volume or external drive.) Open Disk Utility in the Utilities folder of your Applications folder.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Set the number of partitions from the dropdown menu (use 1 partition unless you wish to make more.) Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Partition button and wait until the volume(s) mount on the Desktop.
4. Select the volume you just created (this is the sub-entry under the drive entry) from the left side list. Click on the Erase tab in the DU main window.
5. Set the format type to Mac OS Extended (Journaled, if supported.) Click on the Options button, check the button for Zero Data and click on OK to return to the Erase window.
6. Click on the Erase button. The format process will take 30 minutes to an hour or more depending upon the drive size.
If this is the second drive in your computer, be sure you have jumpered the drive as SLAVE (assuming the original hard drive is jumpered as MASTER.)

New computer does not see others on network

I have a home office network with 3 computers on a WRT110. One laptop is connected wirelessly. When installing a new laptop (which will replace one w/ a bad video) it connects immediately (when using hard wire connection) thru the router to the internet but does not see the other computers nor do they see it. I don't see any option to make a connection disk in the WRT110 manual or software.
Message Edited by JANATION on 01-12-2010 06:05 PM

Make sure File and Printer Sharing is Enabled...Also make sure both the computer's are in the same workgroup...
The default workgroup name in Windows Vista has been changed to WORKGROUP. In WindowsXP, the default workgroup name is MSHOME...
Also go into the computer software firewall on each computer, and set it to "trust" the other computers on your network.
If your firewall or PC security program keeps a list of trusted applications (also known as a "trusted zone"), then make sure that your router is in the trusted zone on your firewall...

Bridge CS4 Does Not See External Drive

Very suddenly, Bridge is not seeing the external USB connected driver I use to store recent photos. I read a similar message here and the writer was told to add the drive to favorites. That appeared to work for him, but I could not do that since the folder doesn't appear under Computer in the favorites section either. The drive appears in Windows Explorer. I am using Vista 32. Any suggestions?
Fran

Did you power up or connect the external drive after Bridge had been started? I've observed that Bridge only includes drives that were attached and active when Bridge was launched; it does not add a drive to its folders list if that drive is started after Bridge is active. With your external drive on (and appearing in explorer) try exiting and relauching Bridge.

[SOLVED] New install does not see SSD drive

Similar Messages

Maybe you are looking for