[SOLVED] New XORG 1.10.*

I know that there are many bug reports on the 1.10 update. It also appears to be an upstream issue.
I use Arch for production work. And of course the issue is causing me some problems. I've reverted my workflow through a VM.
I understand that all things take time. But I also know there are a lot of experienced Archers out there who have a "gut" feel for how long the fix will take to make it's way through the system.
I am asking for those "gut" guesses on a time frame.....
Thanks!
Dave............
Last edited by dcbdbis (2011-04-19 01:22:09)

dcbdbis wrote:
Thank you for the response.
I am an independent developer. Production means I do my daily workflow on Arch. Sometimes that a CAD design using Windows in VMWare, other times it's ANSI C.....and it could be either platform as tht target.
So for me....lesson learned.
I've read enough grief about going back. May be safer for me to reinstall. I have solid backups. A reinstall would not cost me any data nor workflow. Just a little time to bring it back up to scratch....But then the catch-22....the errant portion of the X-org server sould come back with the first post-install 'pacman -Syu'.
As a dev, you should have a backup and downgrading should not be an issue, no?
Any "gut" guesses on a timeframe for a fix from upstream based upon personal experience? Their site (xorg) has plenty of issues on their reports too. So it's clearly not Arch specific.
In that case, please ask on the X mailing lists. Any replies given here aren't worth the bits that were sent to the forum software....

Similar Messages

[solved] new xorg not autodetecting touchpad

After I upgraded to to xorg server 1.6, my touchpad doesn't work. Not sure what is going on. There doesn't seem to be any errors in the log. The mouse that is detected is a usb one I found in a corner trying to figure this out.
Any ideas?
Thanks
My xorg.conf is:
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/75dpi"
FontPath "/usr/share/fonts/100dpi"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
FontPath "/usr/local/share/fonts"
EndSection
Section "Module"
Load "bitmap"
Load "int10"
Load "vbe"
EndSection
Section "Monitor"
Identifier "Monitor0"
Option "DPMS" "true"
EndSection
Section "Device"
Identifier "Card0"
Driver "intel"
Option "DRI" "true"
VendorName "Intel Corporation"
BoardName "Mobile Integrated Graphics Controller"
BusID "PCI:0:2:0"
Option "FramebufferCompression" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
EndSection
Section "DRI"
Mode 0666
EndSection
Section "Extensions"
Option "Composite" "Enable"
Option "MIT-SHM" "Yes"
EndSection
Xorg.0.log:
X.Org X Server 1.6.1
Release Date: 2009-4-14
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.29-ARCH i686
Current Operating System: Linux awalterslaptop 2.6.29-ARCH #1 SMP PREEMPT Wed Apr 8 12:47:56 UTC 2009 i686
Build Date: 15 April 2009 11:09:10AM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Thu Apr 16 11:59:03 2009
(==) Using config file: "/etc/X11/xorg.conf"
(==) No Layout section. Using the first Screen section.
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(==) Automatically adding devices
(==) Automatically enabling devices
(WW) The directory "/usr/local/share/fonts" does not exist.
Entry deleted from font path.
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/75dpi,
/usr/share/fonts/100dpi,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(**) Extension "Composite" is enabled
(**) Extension "MIT-SHM" is enabled
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(II) Loader magic: 0x1a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(++) using VT number 7
(--) PCI:*(0@0:2:0) Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff00000/524288, 0xd0000000/268435456, 0xefec0000/262144, I/O @ 0x0000eff8/8
(--) PCI: (0@0:2:1) Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller rev 3, Mem @ 0xeff80000/524288
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded by default.
(II) "dbe" will be loaded by default.
(II) "glx" will be loaded by default.
(II) "record" will be loaded by default.
(II) "dri" will be loaded by default.
(II) "dri2" will be loaded by default.
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vbe"
(II) Loading /usr/lib/xorg/modules//libvbe.so
(II) Module vbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.1.0
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "intel"
(II) Loading /usr/lib/xorg/modules/drivers//intel_drv.so
(II) Module intel: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.3.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, 965G, G35, 965Q, 946GZ,
965GM, 965GME/GLE, G33, Q35, Q33, Intel Integrated Graphics Device
(II) Primary Device is: PCI 00@00:02:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) Loading sub module "vbe"
(II) LoadModule: "vbe"
(II) Reloading /usr/lib/xorg/modules//libvbe.so
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) intel(0): Creating default Display subsection in Screen section
"Screen0" for depth/fbbpp 24/32
(==) intel(0): Depth 24, (--) framebuffer bpp 32
(==) intel(0): RGB weight 888
(==) intel(0): Default visual is TrueColor
(**) intel(0): Option "DRI" "true"
(**) intel(0): Option "FramebufferCompression" "true"
(II) intel(0): Integrated Graphics Chipset: Intel(R) 945GM
(--) intel(0): Chipset: "945GM"
(--) intel(0): Linear framebuffer at 0xD0000000
(--) intel(0): IO registers at addr 0xEFF00000
(II) intel(0): 2 display pipes available.
(==) intel(0): Using EXA for acceleration
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) intel(0): Output VGA using monitor section Monitor0
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): Output LVDS has no monitor section
(II) intel(0): I2C bus "LVDSDDC_C" initialized.
(II) intel(0): Attempting to determine panel fixed mode.
(II) intel(0): I2C device "LVDSDDC_C:E-EDID segment register" registered at address 0x60.
(II) intel(0): I2C device "LVDSDDC_C:ddc2" registered at address 0xA0.
(II) intel(0): EDID vendor "SEC", prod id 0
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Reloading /usr/lib/xorg/modules//libint10.so
(II) intel(0): initializing int10
(II) intel(0): Bad V_BIOS checksum
(II) intel(0): Primary V_BIOS segment is: 0xc000
(II) intel(0): VESA BIOS detected
(II) intel(0): VESA VBE Version 3.0
(II) intel(0): VESA VBE Total Mem: 7872 kB
(II) intel(0): VESA VBE OEM: Intel(r) 82945GM Chipset Family Graphics Chip Accelerated VGA BIOS
(II) intel(0): VESA VBE OEM Software Rev: 1.0
(II) intel(0): VESA VBE OEM Vendor: Intel Corporation
(II) intel(0): VESA VBE OEM Product: Intel(r) 82945GM Chipset Family Graphics Controller
(II) intel(0): VESA VBE OEM Product Rev: Hardware Version 0.0
(II) intel(0): found backlight control method /sys/class/backlight/acpi_video0
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" registered at address 0x70.
(II) intel(0): No SDVO device found on SDVOB
(II) intel(0): I2C device "SDVOCTRL_E for SDVOB:SDVO Controller B" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOB" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" initialized.
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" registered at address 0x72.
(II) intel(0): No SDVO device found on SDVOC
(II) intel(0): I2C device "SDVOCTRL_E for SDVOC:SDVO Controller C" removed.
(II) intel(0): I2C bus "SDVOCTRL_E for SDVOC" removed.
(II) intel(0): Output TV has no monitor section
(II) intel(0): EDID vendor "SEC", prod id 0
(II) intel(0): Output VGA disconnected
(II) intel(0): Output LVDS connected
(II) intel(0): Output TV disconnected
(II) intel(0): Using exact sizes for initial modes
(II) intel(0): Output LVDS using initial mode 1280x800
(II) intel(0): Monitoring connected displays enabled
(II) intel(0): detected 256 kB GTT.
(II) intel(0): detected 7932 kB stolen memory.
(==) intel(0): video overlay key set to 0x101fe
(==) intel(0): Will not try to enable page flipping
(==) intel(0): Triple buffering disabled
(==) intel(0): Intel XvMC decoder disabled
(==) intel(0): Using gamma correction (1.0, 1.0, 1.0)
(==) intel(0): DPI set to (96, 96)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(II) Loading sub module "exa"
(II) LoadModule: "exa"
(II) Loading /usr/lib/xorg/modules//libexa.so
(II) Module exa: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.4.0
ABI class: X.Org Video Driver, version 5.0
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(II) intel(0): Comparing regs from server start up to After PreInit
(WW) intel(0): Register 0x61200 (PP_STATUS) changed from 0xc0000008 to 0xd000000a
(WW) intel(0): PP_STATUS before: on, ready, sequencing idle
(WW) intel(0): PP_STATUS after: on, ready, sequencing on
(WW) intel(0): Register 0x70024 (PIPEASTAT) changed from 0x00000000 to 0x80000203
(WW) intel(0): PIPEASTAT before: status:
(WW) intel(0): PIPEASTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS VBLANK_INT_STATUS OREG_UPDATE_STATUS
(WW) intel(0): Register 0x71024 (PIPEBSTAT) changed from 0x00000202 to 0x80000242
(WW) intel(0): PIPEBSTAT before: status: VSYNC_INT_STATUS VBLANK_INT_STATUS
(WW) intel(0): PIPEBSTAT after: status: FIFO_UNDERRUN VSYNC_INT_STATUS LBLC_EVENT_STATUS VBLANK_INT_STATUS
(WW) intel(0): Register 0x68060 (TV_SC_CTL_1) changed from 0xc1710087 to 0xc1710088
(WW) intel(0): Register 0x68064 (TV_SC_CTL_2) changed from 0x6b405140 to 0x4e2d1dc8
(II) Loading sub module "dri"
(II) LoadModule: "dri"
(II) Reloading /usr/lib/xorg/modules/extensions//libdri.so
(==) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprD)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprD)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprD)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) intel(0): Kernel reported 810752 total, 1 used
(II) intel(0): I830CheckAvailableMemory: 3243004 kB available
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 10, (OK)
drmOpenByBusid: drmOpenMinor returns 10
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) intel(0): [drm] Using the DRM lock SAREA also for drawables.
(II) intel(0): [drm] framebuffer mapped by ddx driver
(II) intel(0): [drm] added 1 reserved context for kernel
(II) intel(0): X context handle = 0x1
(II) intel(0): [drm] installed DRM signal handler
(**) intel(0): Framebuffer compression enabled
(**) intel(0): Tiling enabled
(==) intel(0): VideoRam: 262144 KB
(II) intel(0): Attempting memory allocation with tiled buffers.
(II) intel(0): Tiled allocation successful.
(II) intel(0): [drm] Registers = 0xeff00000
(II) intel(0): [drm] ring buffer = 0xd0000000
(II) intel(0): [drm] mapped front buffer at 0xd1000000, handle = 0xd1000000
(II) intel(0): [drm] mapped back buffer at 0xd4000000, handle = 0xd4000000
(II) intel(0): [drm] mapped depth buffer at 0xd5000000, handle = 0xd5000000
(II) intel(0): [drm] mapped classic textures at 0xd6000000, handle = 0xd6000000
(II) intel(0): [drm] Initialized kernel agp heap manager, 33554432
(II) intel(0): [dri] visual configs initialized
(II) intel(0): Page Flipping disabled
(II) intel(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) EXA(0): Offscreen pixmap area of 31457280 bytes
(II) EXA(0): Driver registered support for the following operations:
(II) Solid
(II) Copy
(II) Composite (RENDER acceleration)
(==) intel(0): Backing store disabled
(==) intel(0): Silken mouse enabled
(II) intel(0): Initializing HW Cursor
(II) intel(0): [DRI] installation complete
(II) intel(0): xf86BindGARTMemory: bind key 0 at 0x01000000 (pgoffset 4096)
(II) intel(0): xf86BindGARTMemory: bind key 1 at 0x02000000 (pgoffset 8192)
(II) intel(0): xf86BindGARTMemory: bind key 2 at 0x04000000 (pgoffset 16384)
(II) intel(0): xf86BindGARTMemory: bind key 3 at 0x05000000 (pgoffset 20480)
(II) intel(0): xf86BindGARTMemory: bind key 4 at 0x06000000 (pgoffset 24576)
(II) intel(0): Fixed memory allocation layout:
(II) intel(0): 0x00000000-0x0001ffff: ring buffer (128 kB)
(II) intel(0): 0x00020000-0x0061ffff: compressed frame buffer (6144 kB, 0x00000000cf820000 physical
(II) intel(0): 0x00620000-0x00620fff: compressed ll buffer (4 kB, 0x00000000cfe20000 physical
(II) intel(0): 0x00621000-0x0062afff: HW cursors (40 kB, 0x00000000cfe21000 physical
(II) intel(0): 0x0062b000-0x00632fff: logical 3D context (32 kB)
(II) intel(0): 0x00633000-0x00633fff: overlay registers (4 kB, 0x00000000cfe33000 physical
(II) intel(0): 0x007bf000: end of stolen memory
(II) intel(0): 0x01000000-0x01ffffff: front buffer (10240 kB) X tiled
(II) intel(0): 0x02000000-0x03dfffff: exa offscreen (30720 kB)
(II) intel(0): 0x04000000-0x04ffffff: back buffer (10240 kB) X tiled
(II) intel(0): 0x05000000-0x05ffffff: depth buffer (10240 kB) X tiled
(II) intel(0): 0x06000000-0x07ffffff: classic textures (32768 kB)
(II) intel(0): 0x10000000: end of aperture
(WW) intel(0): ESR is 0x00000001, instruction error
(WW) intel(0): PRB0_CTL (0x0001f001) indicates ring buffer enabled
(WW) intel(0): Existing errors found in hardware state.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(II) intel(0): Output configuration:
(II) intel(0): Pipe A is off
(II) intel(0): Display plane A is now disabled and connected to pipe A.
(II) intel(0): Pipe B is on
(II) intel(0): Display plane B is now enabled and connected to pipe B.
(II) intel(0): Output VGA is connected to pipe none
(II) intel(0): Output LVDS is connected to pipe B
(II) intel(0): Output TV is connected to pipe none
(II) intel(0): [drm] dma control initialized, using IRQ 16
(II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(II) intel(0): Selecting standard 18 bit TMDS pixel format.
(**) Option "dpms" "true"
(**) intel(0): DPMS enabled
(II) intel(0): Set up textured video
(II) intel(0): Set up overlay video
(II) intel(0): direct rendering: Enabled
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:00:02.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/i915_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) intel(0): Setting screen physical size to 331 x 207
(II) config/hal: Adding input device HID 062a:0000
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.1
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) HID 062a:0000: always reports core events
(**) HID 062a:0000: Device: "/dev/input/event11"
(II) HID 062a:0000: Found 3 mouse buttons
(II) HID 062a:0000: Found x and y relative axes
(II) HID 062a:0000: Found scroll wheel(s)
(II) HID 062a:0000: Configuring as mouse
(**) HID 062a:0000: YAxisMapping: buttons 4 and 5
(**) HID 062a:0000: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "HID 062a:0000" (type: MOUSE)
(**) HID 062a:0000: (accel) keeping acceleration scheme 1
(**) HID 062a:0000: (accel) filter chain progression: 2.00
(**) HID 062a:0000: (accel) filter stage 0: 20.00 ms
(**) HID 062a:0000: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Macintosh mouse button emulation
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event8"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Video Bus
(**) Video Bus: always reports core events
(**) Video Bus: Device: "/dev/input/event7"
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) intel(0): EDID vendor "SEC", prod id 0
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 0
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
(II) intel(0): EDID vendor "SEC", prod id 0
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1280x800"x0.0 71.11 1280 1328 1360 1440 800 802 808 823 -hsync -vsync (49.4 kHz)
(II) intel(0): EDID vendor "SEC", prod id 0
(II) intel(0): xf86BindGARTMemory: bind key 5 at 0x007bf000 (pgoffset 1983)
(II) intel(0): xf86UnbindGARTMemory: unbind key 5
exaCopyDirty: Pending damage region empty!
Last edited by amw2320 (2009-05-03 04:45:17)

I hope i won't say anything stupid here, but AFAIUnderstand Xorg has now an autodetect "feature" that fails more often than not, or configures mice with weird defaults.
Try to add this to your /etc/X11/xorg.conf:
Section "ServerFlags"
Option "AutoAddDevices" "false"
Option "DontZap" "false"
EndSection
Section "InputDevice"
Identifier "Touchpad"
Driver "synaptics"
Option "CorePointer"
Option "Device" "/dev/misc/psaux"
Option "Protocol" "auto-dev"
# Option "LeftEdge" "1000"
# Option "RightEdge" "5400"
# Option "TopEdge" "1000"
# Option "BottomEdge" "4900"
# Option "PalmDetect" "0"
# Option "SHMConfig" "true"
# Option "RBCornerButton" "0"
# Option "RTCornerButton" "0"
Option "MinSpeed" "0.9"
Option "MaxSpeed" "1.4"
Option "TapButton1" "1"
Option "TapButton2" "2"
Option "TapButton3" "3"
Option "VertTwoFingerScroll" "1"
Option "HorizTwoFingerScroll" "1"
# Option "VertEdgeScroll" "1"
# Option "HorizEdgeScroll" "1"
# Option "MaxTapTime" "180"
# Option "MaxTapMove" "2000"
# Option "MaxDoubleTapTime" "360"
# Option "SingleTapTimeout" "360"
# Option "EmulateMidButtonTime" "75"
# Option "HorizScrollDelta" "0"
EndSection
Section "InputDevice"
Identifier "Mouse"
Driver "mouse"
Option "SendCoreEvents" "true"
EndSection
(the "DontZap" option is unrelated to your problem, it allows to kill X with ctrl-alt-backspace)
These touchpad settings are the ones I'm using on my EeePC900, you may want to tweak them. I left some commented options for reference.

[SOLVED] Blank screen starting new Xorg (ATI)

Yes, it's another blank screen problem with xorg. Sorry.
After months of sticking with an older Xorg (due to problems with my ATI Radeon X1550 card and the new Xorg w/ dual head), I decided to make a jump and update to the latest Xorg and ati drivers, foregoing dual screens. I've read you can just start Xorg without a config, which I tried, but no luck. I just get a blank screen. I autogenerated a config file and still get a blank screen. Either way there's no default X cursor or xterm anywhere.
I've tried adding the AllowEmptyInput flag as suggested in related threads, but that doesn't help. My .conf file and log file are listed below. If someone could give me some suggestions to solve this, I'd appreciate it.;
My xorg.conf.new file:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "ServerFlags"
Option "DontZap" "false"
Option "AllowEmptyInput" "off"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
# Load "glx"
Load "extmod"
Load "record"
Load "dri2"
Load "dbe"
Load "dri"
Load "drm"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
#DisplaySize 380 300 # mm
Identifier "Monitor0"
VendorName "ACR"
ModelName "AL1916"
HorizSync 31.0 - 81.0
VertRefresh 56.0 - 75.0
Option "DPMS"
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "NoAccel" # [<bool>]
#Option "SWcursor" # [<bool>]
#Option "Dac6Bit" # [<bool>]
#Option "Dac8Bit" # [<bool>]
#Option "BusType" # [<str>]
#Option "CPPIOMode" # [<bool>]
#Option "CPusecTimeout" # 
#Option "AGPMode" # 
#Option "AGPFastWrite" # [<bool>]
#Option "AGPSize" # 
#Option "GARTSize" # 
#Option "RingSize" # 
#Option "BufferSize" # 
#Option "EnableDepthMoves" # [<bool>]
#Option "EnablePageFlip" # [<bool>]
#Option "NoBackBuffer" # [<bool>]
#Option "DMAForXv" # [<bool>]
#Option "FBTexPercent" # 
#Option "DepthBits" # 
#Option "PCIAPERSize" # 
#Option "AccelDFS" # [<bool>]
#Option "IgnoreEDID" # [<bool>]
#Option "DisplayPriority" # [<str>]
#Option "PanelSize" # [<str>]
#Option "ForceMinDotClock" # <freq>
#Option "ColorTiling" # [<bool>]
#Option "VideoKey" # 
#Option "RageTheatreCrystal" # 
#Option "RageTheatreTunerPort" # 
#Option "RageTheatreCompositePort" # 
#Option "RageTheatreSVideoPort" # 
#Option "TunerType" # 
#Option "RageTheatreMicrocPath" # <str>
#Option "RageTheatreMicrocType" # <str>
#Option "ScalerWidth" # 
#Option "RenderAccel" # [<bool>]
#Option "SubPixelOrder" # [<str>]
#Option "ShowCache" # [<bool>]
#Option "DynamicClocks" # [<bool>]
#Option "VGAAccess" # [<bool>]
#Option "ReverseDDC" # [<bool>]
#Option "LVDSProbePLL" # [<bool>]
#Option "AccelMethod" # <str>
#Option "DRI" # [<bool>]
#Option "ConnectorTable" # <str>
#Option "DefaultConnectorTable" # [<bool>]
#Option "DefaultTMDSPLL" # [<bool>]
#Option "TVDACLoadDetect" # [<bool>]
#Option "ForceTVOut" # [<bool>]
#Option "TVStandard" # <str>
#Option "IgnoreLidStatus" # [<bool>]
#Option "DefaultTVDACAdj" # [<bool>]
#Option "Int10" # [<bool>]
#Option "EXAVSync" # [<bool>]
#Option "ATOMTVOut" # [<bool>]
#Option "R4xxATOM" # [<bool>]
Identifier "Card0"
Driver "ati"
VendorName "ATI Technologies Inc"
BoardName "RV505 [Radeon X1550 Series]"
BusID "PCI:1:0:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
My Xorg.0.log:
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux aina 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
Build Date: 18 July 2009 08:27:13PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 18:18:46 2009
(++) Using config file: "./xorg.conf.new"
(==) ServerLayout "X.org Configured"
(**) |-->Screen "Screen0" (0)
(**) | |-->Monitor "Monitor0"
(**) | |-->Device "Card0"
(**) |-->Input Device "Mouse0"
(**) |-->Input Device "Keyboard0"
(**) Option "DontZap" "false"
(**) Option "AllowEmptyInput" "off"
(==) Automatically adding devices
(==) Automatically enabling devices
(**) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(**) ModulePath set to "/usr/lib/xorg/modules"
(II) Loader magic: 0x7a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:7143:1043:01c6 ATI Technologies Inc RV505 [Radeon X1550 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(--) PCI: (0:1:0:1) 1002:7163:1043:01c7 ATI Technologies Inc RV505 [Radeon X1550 Series] (Secondary) rev 0, Mem @ 0xf5010000/65536
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) "extmod" will be loaded. This was enabled by default and also specified in the config file.
(II) "dbe" will be loaded. This was enabled by default and also specified in the config file.
(II) "glx" will be loaded by default.
(II) "record" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri" will be loaded. This was enabled by default and also specified in the config file.
(II) "dri2" will be loaded. This was enabled by default and also specified in the config file.
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "mouse"
(II) Loading /usr/lib/xorg/modules/input//mouse_drv.so
(II) Module mouse: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.4.0
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) LoadModule: "kbd"
(II) Loading /usr/lib/xorg/modules/input//kbd_drv.so
(II) Module kbd: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 1.3.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000f5000000
(II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon X1550" (ChipID = 0x7143)
(WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x01c6
IOBaseAddress: 0xb000
Filename: SV25429.bin
BIOS Bootup Message:
7143.9.13.1.29.AS01
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 550000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 550.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
encoder: 0x15
encoder: 0x13
encoder: 0x16
(II) RADEON(0): Output VGA-0 using monitor section Monitor0
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP1: INTERNAL_KLDSCP_TMDS1
DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
(II) RADEON(0): Year: 2006 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
(II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: AL1916
(II) RADEON(0): ACER
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0004727c07e4060000
(II) RADEON(0): 0d1001030e261e782e6875a25a499f23
(II) RADEON(0): 135054bfef00714f8180010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1f
(II) RADEON(0): 510e000a202020202020000000fc0041
(II) RADEON(0): 4c313931360a202020202020000000fe
(II) RADEON(0): 00414345520a202020202020202000b1
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
(II) RADEON(0): Year: 2006 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
(II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: AL1916
(II) RADEON(0): ACER
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0004727c07e4060000
(II) RADEON(0): 0d1001030e261e782e6875a25a499f23
(II) RADEON(0): 135054bfef00714f8180010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1f
(II) RADEON(0): 510e000a202020202020000000fc0041
(II) RADEON(0): 4c313931360a202020202020000000fe
(II) RADEON(0): 00414345520a202020202020202000b1
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (380, 300) mm
(**) RADEON(0): DPI set to (85, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1b80000
(II) RADEON(0): Will use depth buffer at offset 0x21c0000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0xfff8000
(II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf93c5000
(II) RADEON(0): [pci] ring handle = 0xf93c5000
(II) RADEON(0): [pci] Ring mapped at 0xa765d000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf94c6000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb792c000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf94c7000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa745d000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf96c7000
(II) RADEON(0): [pci] GART Texture map mapped at 0xa57dd000
(II) RADEON(0): [drm] register handle = 0x2ea00000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output CRT1 disable success
Mode 1280x1024 - 1688 1066 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
freq: 108000000
best_freq: 108000000
best_feedback_div: 48
best_ref_div: 2
best_post_div: 6
(II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x30(48), pdiv 6
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 enable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 376 x 301
(**) Option "Protocol" "auto"
(**) Option "Device" "/dev/input/mice"
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(**) Mouse0: Device: "/dev/input/mice"
(**) Mouse0: Protocol: "auto"
(**) Option "CorePointer"
(**) Mouse0: always reports core events
(**) Option "Device" "/dev/input/mice"
(==) Mouse0: Emulate3Buttons, Emulate3Timeout: 50
(**) Option "ZAxisMapping" "4 5 6 7"
(**) Mouse0: ZAxisMapping: buttons 4, 5, 6 and 7
(**) Mouse0: Buttons: 11
(**) Mouse0: Sensitivity: 1
(II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE)
(**) Mouse0: (accel) keeping acceleration scheme 1
(**) Mouse0: (accel) filter chain progression: 2.00
(**) Mouse0: (accel) filter stage 0: 20.00 ms
(**) Mouse0: (accel) set acceleration profile 0
(II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
(II) Mouse0: ps2EnableDataReporting: succeeded
(**) Option "CoreKeyboard"
(**) Keyboard0: always reports core events
(**) Option "Protocol" "standard"
(**) Keyboard0: Protocol: standard
(**) Option "AutoRepeat" "500 30"
(**) Option "XkbRules" "xorg"
(**) Keyboard0: XkbRules: "xorg"
(**) Option "XkbModel" "pc105"
(**) Keyboard0: XkbModel: "pc105"
(**) Option "XkbLayout" "us"
(**) Keyboard0: XkbLayout: "us"
(**) Option "CustomKeycodes" "off"
(**) Keyboard0: CustomKeycodes disabled
(II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD)
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event6"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) AIGLX: Suspending AIGLX clients for VT switch
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): avivo_restore !
Enable CRTC 0 success
Unblank CRTC 0 success
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
(II) ImExPS/2 Logitech Explorer Mouse: Close
(II) UnloadModule: "evdev"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) UnloadModule: "kbd"
(II) UnloadModule: "mouse"
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf802f000 at 0xb792d000
(II) RADEON(0): [drm] Closed DRM master.
Last edited by edenxavier (2009-07-28 22:33:44)

Did like you said, however it didn't work. It complained this time about not having the fbdev available. It's not installed because I didn't think it was related. Here's the new Xorg.log.0 file:
X.Org X Server 1.6.2
Release Date: 2009-7-7
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.30-ARCH i686
Current Operating System: Linux aina 2.6.30-ARCH #1 SMP PREEMPT Mon Jul 20 11:20:32 UTC 2009 i686
Build Date: 18 July 2009 08:27:13PM
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Mon Jul 27 23:20:52 2009
(II) Loader magic: 0x7a40
(II) Module ABI versions:
X.Org ANSI C Emulation: 0.4
X.Org Video Driver: 5.0
X.Org XInput driver : 4.0
X.Org Server Extension : 2.0
(II) Loader running on linux
(--) using VT number 7
(--) PCI:*(0:1:0:0) 1002:7143:1043:01c6 ATI Technologies Inc RV505 [Radeon X1550 Series] rev 0, Mem @ 0xe0000000/268435456, 0xf5000000/65536, I/O @ 0x0000b000/256, BIOS @ 0x????????/131072
(--) PCI: (0:1:0:1) 1002:7163:1043:01c7 ATI Technologies Inc RV505 [Radeon X1550 Series] (Secondary) rev 0, Mem @ 0xf5010000/65536
(==) Using default built-in configuration (30 lines)
(==) --- Start of built-in configuration ---
Section "Device"
Identifier "Builtin Default ati Device 0"
Driver "ati"
EndSection
Section "Screen"
Identifier "Builtin Default ati Screen 0"
Device "Builtin Default ati Device 0"
EndSection
Section "Device"
Identifier "Builtin Default vesa Device 0"
Driver "vesa"
EndSection
Section "Screen"
Identifier "Builtin Default vesa Screen 0"
Device "Builtin Default vesa Device 0"
EndSection
Section "Device"
Identifier "Builtin Default fbdev Device 0"
Driver "fbdev"
EndSection
Section "Screen"
Identifier "Builtin Default fbdev Screen 0"
Device "Builtin Default fbdev Device 0"
EndSection
Section "ServerLayout"
Identifier "Builtin Default Layout"
Screen "Builtin Default ati Screen 0"
Screen "Builtin Default vesa Screen 0"
Screen "Builtin Default fbdev Screen 0"
EndSection
(==) --- End of built-in configuration ---
(==) ServerLayout "Builtin Default Layout"
(**) |-->Screen "Builtin Default ati Screen 0" (0)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default ati Device 0"
(==) No monitor specified for screen "Builtin Default ati Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default vesa Screen 0" (1)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default vesa Device 0"
(==) No monitor specified for screen "Builtin Default vesa Screen 0".
Using a default monitor configuration.
(**) |-->Screen "Builtin Default fbdev Screen 0" (2)
(**) | |-->Monitor "<default monitor>"
(**) | |-->Device "Builtin Default fbdev Device 0"
(==) No monitor specified for screen "Builtin Default fbdev Screen 0".
Using a default monitor configuration.
(==) Automatically adding devices
(==) Automatically enabling devices
(==) FontPath set to:
/usr/share/fonts/misc,
/usr/share/fonts/100dpi:unscaled,
/usr/share/fonts/75dpi:unscaled,
/usr/share/fonts/TTF,
/usr/share/fonts/Type1,
built-ins
(==) ModulePath set to "/usr/lib/xorg/modules"
(II) Cannot locate a core pointer device.
(II) Cannot locate a core keyboard device.
(II) The server relies on HAL to provide the list of input devices.
If no devices become available, reconfigure HAL or disable AllowEmptyInput.
(WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
(II) No APM support in BIOS or kernel
(II) System resource ranges:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(II) LoadModule: "extmod"
(II) Loading /usr/lib/xorg/modules/extensions//libextmod.so
(II) Module extmod: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension MIT-SCREEN-SAVER
(II) Loading extension XFree86-VidModeExtension
(II) Loading extension XFree86-DGA
(II) Loading extension DPMS
(II) Loading extension XVideo
(II) Loading extension XVideo-MotionCompensation
(II) Loading extension X-Resource
(II) LoadModule: "dbe"
(II) Loading /usr/lib/xorg/modules/extensions//libdbe.so
(II) Module dbe: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DOUBLE-BUFFER
(II) LoadModule: "glx"
(II) Loading /usr/lib/xorg/modules/extensions//libglx.so
(II) Module glx: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(==) AIGLX enabled
(II) Loading extension GLX
(II) LoadModule: "record"
(II) Loading /usr/lib/xorg/modules/extensions//librecord.so
(II) Module record: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.13.0
Module class: X.Org Server Extension
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension RECORD
(II) LoadModule: "dri"
(II) Loading /usr/lib/xorg/modules/extensions//libdri.so
(II) Module dri: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension XFree86-DRI
(II) LoadModule: "dri2"
(II) Loading /usr/lib/xorg/modules/extensions//libdri2.so
(II) Module dri2: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.1.0
ABI class: X.Org Server Extension, version 2.0
(II) Loading extension DRI2
(II) LoadModule: "ati"
(II) Loading /usr/lib/xorg/modules/drivers//ati_drv.so
(II) Module ati: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "radeon"
(II) Loading /usr/lib/xorg/modules/drivers//radeon_drv.so
(II) Module radeon: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 6.12.2
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "vesa"
(II) Loading /usr/lib/xorg/modules/drivers//vesa_drv.so
(II) Module vesa: vendor="X.Org Foundation"
compiled for 1.6.0, module version = 2.2.0
Module class: X.Org Video Driver
ABI class: X.Org Video Driver, version 5.0
(II) LoadModule: "fbdev"
(WW) Warning, couldn't open module fbdev
(II) UnloadModule: "fbdev"
(EE) Failed to load module "fbdev" (module does not exist, 0)
(II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon 8500 AIW BC (AGP),
ATI Radeon IGP320M (U1) 4336, ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI Radeon 9700 Pro ND (AGP),
ATI Radeon 9700/9500Pro NE (AGP), ATI Radeon 9600TX NF (AGP),
ATI FireGL X1 NG (AGP), ATI Radeon 9800PRO NH (AGP),
ATI Radeon 9800 NI (AGP), ATI FireGL X2 NK (AGP),
ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI FirePro V8750 (FireGL),
ATI FirePro V7760 (FireGL), ATI Mobility RADEON HD 4850,
ATI Mobility RADEON HD 4850 X2, ATI Radeon 4800 Series,
ATI FirePro RV770, AMD FireStream 9270, AMD FireStream 9250,
ATI FirePro V8700 (FireGL), ATI Mobility RADEON HD 4870,
ATI Mobility RADEON M98, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Radeon RV730 (AGP), ATI FirePro M5750, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI RV730 PRO [Radeon HD 4650], ATI FirePro V7750 (FireGL),
ATI FirePro V5700 (FireGL), ATI FirePro V3750 (FireGL), ATI RV610,
ATI Radeon HD 2400 XT, ATI Radeon HD 2400 Pro,
ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000, ATI RV610,
ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon HD 4350,
ATI Mobility Radeon 4300 Series, ATI Mobility Radeon 4500 Series,
ATI Mobility Radeon 4500 Series, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon RV710,
ATI Radeon HD 3470, ATI Mobility Radeon HD 3430,
ATI Mobility Radeon HD 3400 Series, ATI Radeon HD 3450,
ATI Radeon HD 3450, ATI Radeon HD 3430, ATI Radeon HD 3450,
ATI FirePro V3700, ATI FireMV 2450, ATI FireMV 2260, ATI FireMV 2260,
ATI Radeon HD 3600 Series, ATI Radeon HD 3650 AGP,
ATI Radeon HD 3600 PRO, ATI Radeon HD 3600 XT,
ATI Radeon HD 3600 PRO, ATI Mobility Radeon HD 3650,
ATI Mobility Radeon HD 3670, ATI Mobility FireGL V5700,
ATI Mobility FireGL V5725, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3100 Graphics, ATI Radeon HD 3300 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3000 Graphics,
ATI Radeon HD Graphics, ATI Radeon Graphics,
ATI Mobility Radeon HD Graphics, ATI Mobility Radeon Graphics,
ATI Radeon Graphics
(II) VESA: driver for VESA chipsets: vesa
(II) Primary Device is: PCI 01@00:00:0
(II) resource ranges after xf86ClaimFixedResources() call:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[5] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
(WW) Falling back to old probe method for vesa
(II) resource ranges after probing:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b]
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b]
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b]
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b]
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b]
(II) Setting vga for screen 0.
(II) RADEON(0): TOTO SAYS 00000000f5000000
(II) RADEON(0): MMIO registers at 0x00000000f5000000: size 64KB
(II) RADEON(0): PCI bus 1 card 0 func 0
(II) RADEON(0): Creating default Display subsection in Screen section
"Builtin Default ati Screen 0" for depth/fbbpp 24/32
(==) RADEON(0): Depth 24, (--) framebuffer bpp 32
(II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(II) Loading sub module "vgahw"
(II) LoadModule: "vgahw"
(II) Loading /usr/lib/xorg/modules//libvgahw.so
(II) Module vgahw: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 0.1.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(==) RADEON(0): RGB weight 888
(II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
(--) RADEON(0): Chipset: "ATI Radeon X1550" (ChipID = 0x7143)
(WW) RADEON(0): R500 support is under development. Please report any issues to [email protected]
(--) RADEON(0): Linear framebuffer at 0x00000000e0000000
(II) RADEON(0): PCIE card detected
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/lib/xorg/modules//libint10.so
(II) Module int10: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org Video Driver, version 5.0
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(II) RADEON(0): ATOM BIOS detected
(II) RADEON(0): ATOM BIOS Rom:
SubsystemVendorID: 0x1043 SubsystemID: 0x01c6
IOBaseAddress: 0xb000
Filename: SV25429.bin
BIOS Bootup Message:
7143.9.13.1.29.AS01
(II) RADEON(0): Framebuffer space used by Firmware (kb): 20
(II) RADEON(0): Start of VRAM area used by Firmware: 0xfffb000
(II) RADEON(0): AtomBIOS requests 20kB of VRAM scratch space
(II) RADEON(0): AtomBIOS VRAM scratch base: 0xfffb000
(II) RADEON(0): Cannot get VRAM scratch space. Allocating in main memory instead
(II) RADEON(0): Default Engine Clock: 550000
(II) RADEON(0): Default Memory Clock: 400000
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Output: 1100000
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Output: 0
(II) RADEON(0): Maximum Pixel ClockPLL Frequency Input: 13500
(II) RADEON(0): Minimum Pixel ClockPLL Frequency Input: 1000
(II) RADEON(0): Maximum Pixel Clock: 400000
(II) RADEON(0): Reference Clock: 27000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) RADEON(0): [dri] Found DRI library version 1.3.0 and kernel module version 1.30.0
(==) RADEON(0): Page Flipping disabled on r5xx and newer chips.
(II) RADEON(0): Will try to use DMA for Xv image transfers
(II) RADEON(0): Generation 2 PCI interface, using max accessible memory
(II) RADEON(0): Detected total video RAM=262144K, accessible=262144K (PCI BAR=262144K)
(--) RADEON(0): Mapped VideoRAM: 262144 kByte (128 bit DDR SDRAM)
(II) RADEON(0): Color tiling enabled by default
(II) RADEON(0): Max desktop size set to 2560x1600
(II) RADEON(0): For a larger or smaller max desktop size, add a Virtual line to your xorg.conf
(II) RADEON(0): If you are having trouble with 3D, reduce the desktop size by adjusting the Virtual line to your xorg.conf
(II) Loading sub module "ddc"
(II) LoadModule: "ddc"
(II) Module "ddc" already built-in
(II) Loading sub module "i2c"
(II) LoadModule: "i2c"
(II) Module "i2c" already built-in
(II) RADEON(0): ref_freq: 2700, min_out_pll: 64800, max_out_pll: 110000, min_in_pll: 100, max_in_pll: 1350, xclk: 40000, sclk: 550.000000, mclk: 400.000000
(II) RADEON(0): PLL parameters: rf=2700 rd=13 min=64800 max=110000; xclk=40000
(II) RADEON(0): Skipping TV-Out
(II) RADEON(0): Skipping Component Video
encoder: 0x15
encoder: 0x13
encoder: 0x16
(II) RADEON(0): Output VGA-0 has no monitor section
(II) RADEON(0): I2C bus "VGA-0" initialized.
(II) RADEON(0): Output DVI-0 has no monitor section
(II) RADEON(0): I2C bus "DVI-0" initialized.
(II) RADEON(0): Port0:
XRANDR name: VGA-0
Connector: VGA
CRT1: INTERNAL_KLDSCP_DAC1
DDC reg: 0x7e40
(II) RADEON(0): Port1:
XRANDR name: DVI-0
Connector: DVI-I
CRT2: INTERNAL_KLDSCP_DAC2
DFP1: INTERNAL_KLDSCP_TMDS1
DDC reg: 0x7e50
(II) RADEON(0): I2C device "VGA-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "VGA-0:ddc2" registered at address 0xA0.
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Using EDID range info for horizontal sync
(II) RADEON(0): Using EDID range info for vertical refresh
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
(II) RADEON(0): Year: 2006 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
(II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: AL1916
(II) RADEON(0): ACER
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0004727c07e4060000
(II) RADEON(0): 0d1001030e261e782e6875a25a499f23
(II) RADEON(0): 135054bfef00714f8180010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1f
(II) RADEON(0): 510e000a202020202020000000fc0041
(II) RADEON(0): 4c313931360a202020202020000000fe
(II) RADEON(0): 00414345520a202020202020202000b1
finished output detect: 0
(II) RADEON(0): I2C device "DVI-0:E-EDID segment register" registered at address 0x60.
(II) RADEON(0): I2C device "DVI-0:ddc2" registered at address 0xA0.
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0
finished output detect: 1
finished all detect
before xf86InitialConfiguration
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Using hsync ranges from config file
(II) RADEON(0): Using vrefresh ranges from config file
(II) RADEON(0): Printing DDC gathered Modelines:
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 31.50 640 664 704 832 480 489 492 520 -hsync -vsync (37.9 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz)
(II) RADEON(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
(II) RADEON(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz)
(II) RADEON(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) RADEON(0): Modeline "832x624"x0.0 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
(II) RADEON(0): Modeline "800x600"x0.0 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz)
(II) RADEON(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
(II) RADEON(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
(II) RADEON(0): Output: VGA-0, Detected Monitor Type: 1
(II) RADEON(0): EDID data from the display on output: VGA-0 ----------------------
(II) RADEON(0): Manufacturer: ACR Model: 77c Serial#: 1764
(II) RADEON(0): Year: 2006 Week: 13
(II) RADEON(0): EDID Version: 1.3
(II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
(II) RADEON(0): Sync: Separate Composite SyncOnGreen
(II) RADEON(0): Max Image Size [cm]: horiz.: 38 vert.: 30
(II) RADEON(0): Gamma: 2.20
(II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
(II) RADEON(0): Default color space is primary color space
(II) RADEON(0): First detailed timing is preferred mode
(II) RADEON(0): redX: 0.634 redY: 0.354 greenX: 0.287 greenY: 0.621
(II) RADEON(0): blueX: 0.138 blueY: 0.077 whiteX: 0.313 whiteY: 0.329
(II) RADEON(0): Supported established timings:
(II) RADEON(0): 720x400@70Hz
(II) RADEON(0): 640x480@60Hz
(II) RADEON(0): 640x480@67Hz
(II) RADEON(0): 640x480@72Hz
(II) RADEON(0): 640x480@75Hz
(II) RADEON(0): 800x600@56Hz
(II) RADEON(0): 800x600@60Hz
(II) RADEON(0): 800x600@72Hz
(II) RADEON(0): 800x600@75Hz
(II) RADEON(0): 832x624@75Hz
(II) RADEON(0): 1024x768@60Hz
(II) RADEON(0): 1024x768@70Hz
(II) RADEON(0): 1024x768@75Hz
(II) RADEON(0): 1280x1024@75Hz
(II) RADEON(0): Manufacturer's mask: 0
(II) RADEON(0): Supported standard timings:
(II) RADEON(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
(II) RADEON(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
(II) RADEON(0): Supported detailed timing:
(II) RADEON(0): clock: 108.0 MHz Image Size: 376 x 301 mm
(II) RADEON(0): h_active: 1280 h_sync: 1328 h_sync_end 1440 h_blank_end 1688 h_border: 0
(II) RADEON(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1066 v_border: 0
(II) RADEON(0): Ranges: V min: 56 V max: 75 Hz, H min: 31 H max: 81 kHz, PixClock max 140 MHz
(II) RADEON(0): Monitor name: AL1916
(II) RADEON(0): ACER
(II) RADEON(0): EDID (in hex):
(II) RADEON(0): 00ffffffffffff0004727c07e4060000
(II) RADEON(0): 0d1001030e261e782e6875a25a499f23
(II) RADEON(0): 135054bfef00714f8180010101010101
(II) RADEON(0): 010101010101302a009851002a403070
(II) RADEON(0): 1300782d1100001e000000fd00384b1f
(II) RADEON(0): 510e000a202020202020000000fc0041
(II) RADEON(0): 4c313931360a202020202020000000fe
(II) RADEON(0): 00414345520a202020202020202000b1
(II) RADEON(0): EDID vendor "ACR", prod id 1916
(II) RADEON(0): Output: DVI-0, Detected Monitor Type: 0
Dac detection success
Unhandled monitor type 0
(II) RADEON(0): Output VGA-0 connected
(II) RADEON(0): Output DVI-0 disconnected
(II) RADEON(0): Using exact sizes for initial modes
(II) RADEON(0): Output VGA-0 using initial mode 1280x1024
after xf86InitialConfiguration
(**) RADEON(0): Display dimensions: (380, 300) mm
(**) RADEON(0): DPI set to (85, 108)
(II) Loading sub module "fb"
(II) LoadModule: "fb"
(II) Loading /usr/lib/xorg/modules//libfb.so
(II) Module fb: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.0.0
ABI class: X.Org ANSI C Emulation, version 0.4
(==) RADEON(0): Using gamma correction (1.0, 1.0, 1.0)
(II) Loading sub module "ramdac"
(II) LoadModule: "ramdac"
(II) Module "ramdac" already built-in
(==) RADEON(0): Using XAA acceleration architecture
(II) Loading sub module "xaa"
(II) LoadModule: "xaa"
(II) Loading /usr/lib/xorg/modules//libxaa.so
(II) Module xaa: vendor="X.Org Foundation"
compiled for 1.6.2, module version = 1.2.1
ABI class: X.Org Video Driver, version 5.0
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
(!!) RADEON(0): MergedFB support has been removed and replaced with xrandr 1.2 support
(II) UnloadModule: "vesa"
(II) Unloading /usr/lib/xorg/modules/drivers//vesa_drv.so
(--) Depth 24 pixmap format is 32 bpp
(II) do I need RAC? No, I don't.
(II) resource ranges after preInit:
[0] -1 0 0xffffffff - 0xffffffff (0x1) MX[b]
[1] -1 0 0x000f0000 - 0x000fffff (0x10000) MX[b]
[2] -1 0 0x000c0000 - 0x000effff (0x30000) MX[b]
[3] -1 0 0x00000000 - 0x0009ffff (0xa0000) MX[b]
[4] 0 0 0x000a0000 - 0x000affff (0x10000) MS[b](OprU)
[5] 0 0 0x000b0000 - 0x000b7fff (0x8000) MS[b](OprU)
[6] 0 0 0x000b8000 - 0x000bffff (0x8000) MS[b](OprU)
[7] -1 0 0x0000ffff - 0x0000ffff (0x1) IX[b]
[8] -1 0 0x00000000 - 0x00000000 (0x1) IX[b]
[9] 0 0 0x000003b0 - 0x000003bb (0xc) IS[b](OprU)
[10] 0 0 0x000003c0 - 0x000003df (0x20) IS[b](OprU)
(II) RADEON(0): RADEONScreenInit e0000000 0 0
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(==) RADEON(0): Using 24 bit depth buffer
(II) RADEON(0): RADEONInitMemoryMap() :
(II) RADEON(0): mem_size : 0x10000000
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): Depth moves disabled by default
(II) RADEON(0): Using 32 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 29 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1280,8191)
(II) RADEON(0): Reserved area from (0,1280) to (1280,1282)
(II) RADEON(0): Largest offscreen area available: 1280 x 6909
(II) RADEON(0): Will use front buffer at offset 0x0
(II) RADEON(0): Will use back buffer at offset 0x1b80000
(II) RADEON(0): Will use depth buffer at offset 0x21c0000
(II) RADEON(0): Will use 32 kb for PCI GART table at offset 0xfff8000
(II) RADEON(0): Will use 221184 kb for textures at offset 0x2800000
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 11, (OK)
drmOpenByBusid: drmOpenMinor returns 11
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) [drm] DRM interface version 1.3
(II) [drm] DRM open master succeeded.
(II) RADEON(0): [drm] Using the DRM lock SAREA also for drawables.
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): X context handle = 0x1
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [pci] 32768 kB allocated with handle 0xf93e3000
(II) RADEON(0): [pci] ring handle = 0xf93e3000
(II) RADEON(0): [pci] Ring mapped at 0xb77ac000
(II) RADEON(0): [pci] Ring contents 0x00000000
(II) RADEON(0): [pci] ring read ptr handle = 0xf94e4000
(II) RADEON(0): [pci] Ring read ptr mapped at 0xb799f000
(II) RADEON(0): [pci] Ring read ptr contents 0x00000000
(II) RADEON(0): [pci] vertex/indirect buffers handle = 0xf94e5000
(II) RADEON(0): [pci] Vertex/indirect buffers mapped at 0xa74dc000
(II) RADEON(0): [pci] Vertex/indirect buffers contents 0x00000000
(II) RADEON(0): [pci] GART texture map handle = 0xf96e5000
(II) RADEON(0): [pci] GART Texture map mapped at 0xa585c000
(II) RADEON(0): [drm] register handle = 0x2ea00000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(==) RADEON(0): Backing store disabled
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 16
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 29884416
(WW) RADEON(0): DRI init changed memory map, adjusting ...
(WW) RADEON(0): MC_FB_LOCATION was: 0xefffe000 is: 0xefffe000
(WW) RADEON(0): MC_AGP_LOCATION was: 0x003f0000 is: 0xffffffc0
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
(II) RADEON(0): Direct rendering enabled
(II) RADEON(0): XAA Render acceleration unsupported on Radeon 9500/9700 and newer. Please use EXA instead.
(II) RADEON(0): Render acceleration disabled
(II) RADEON(0): num quad-pipes is 1
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Scanline Image Writes
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(II) RADEON(0): DPMS enabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Will use 32 kb for hardware cursor 0 at offset 0x00643000
(II) RADEON(0): Will use 32 kb for hardware cursor 1 at offset 0x00648000
(II) RADEON(0): Largest offscreen area available: 1280 x 6901
(II) RADEON(0): Set up textured video
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
Output CRT1 disable success
Mode 1280x1024 - 1688 1066 5
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0xffffffc0
freq: 108000000
best_freq: 108000000
best_feedback_div: 48
best_ref_div: 2
best_post_div: 6
(II) RADEON(0): crtc(0) Clock: mode 108000, PLL 108000
(II) RADEON(0): crtc(0) PLL : refdiv 2, fbdiv 0x30(48), pdiv 6
Set CRTC 0 PLL success
Set CRTC Timing success
Set CRTC 0 Overscan success
Not using RMX
scaler 0 setup success
Set CRTC 0 Source success
crtc 0 YUV disable setup success
Output DAC1 setup success
Enable CRTC 0 success
Unblank CRTC 0 success
Output CRT1 enable success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
(--) RandR disabled
(II) Initializing built-in extension Generic Event Extension
(II) Initializing built-in extension SHAPE
(II) Initializing built-in extension MIT-SHM
(II) Initializing built-in extension XInputExtension
(II) Initializing built-in extension XTEST
(II) Initializing built-in extension BIG-REQUESTS
(II) Initializing built-in extension SYNC
(II) Initializing built-in extension XKEYBOARD
(II) Initializing built-in extension XC-MISC
(II) Initializing built-in extension SECURITY
(II) Initializing built-in extension XINERAMA
(II) Initializing built-in extension XFIXES
(II) Initializing built-in extension RENDER
(II) Initializing built-in extension RANDR
(II) Initializing built-in extension COMPOSITE
(II) Initializing built-in extension DAMAGE
(II) AIGLX: Screen 0 is not DRI2 capable
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: Searching for BusID pci:0000:01:00.0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 12, (OK)
drmOpenByBusid: drmOpenMinor returns 12
drmOpenByBusid: drmGetBusid reports pci:0000:01:00.0
(II) AIGLX: enabled GLX_MESA_copy_sub_buffer
(II) AIGLX: enabled GLX_SGI_make_current_read
(II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
(II) AIGLX: enabled GLX_texture_from_pixmap with driver support
(II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/r300_dri.so
(II) GLX: Initialized DRI GL provider for screen 0
(II) RADEON(0): Setting screen physical size to 376 x 301
(II) config/hal: Adding input device Macintosh mouse button emulation
(II) LoadModule: "evdev"
(II) Loading /usr/lib/xorg/modules/input//evdev_drv.so
(II) Module evdev: vendor="X.Org Foundation"
compiled for 1.6.1, module version = 2.2.2
Module class: X.Org XInput Driver
ABI class: X.Org XInput driver, version 4.0
(**) Macintosh mouse button emulation: always reports core events
(**) Macintosh mouse button emulation: Device: "/dev/input/event0"
(II) Macintosh mouse button emulation: Found 3 mouse buttons
(II) Macintosh mouse button emulation: Found x and y relative axes
(II) Macintosh mouse button emulation: Configuring as mouse
(**) Macintosh mouse button emulation: YAxisMapping: buttons 4 and 5
(**) Macintosh mouse button emulation: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "Macintosh mouse button emulation" (type: MOUSE)
(**) Macintosh mouse button emulation: (accel) keeping acceleration scheme 1
(**) Macintosh mouse button emulation: (accel) filter chain progression: 2.00
(**) Macintosh mouse button emulation: (accel) filter stage 0: 20.00 ms
(**) Macintosh mouse button emulation: (accel) set acceleration profile 0
(II) config/hal: Adding input device ImExPS/2 Logitech Explorer Mouse
(**) ImExPS/2 Logitech Explorer Mouse: always reports core events
(**) ImExPS/2 Logitech Explorer Mouse: Device: "/dev/input/event6"
(II) ImExPS/2 Logitech Explorer Mouse: Found 5 mouse buttons
(II) ImExPS/2 Logitech Explorer Mouse: Found x and y relative axes
(II) ImExPS/2 Logitech Explorer Mouse: Found scroll wheel(s)
(II) ImExPS/2 Logitech Explorer Mouse: Configuring as mouse
(**) ImExPS/2 Logitech Explorer Mouse: YAxisMapping: buttons 4 and 5
(**) ImExPS/2 Logitech Explorer Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
(II) XINPUT: Adding extended input device "ImExPS/2 Logitech Explorer Mouse" (type: MOUSE)
(**) ImExPS/2 Logitech Explorer Mouse: (accel) keeping acceleration scheme 1
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter chain progression: 2.00
(**) ImExPS/2 Logitech Explorer Mouse: (accel) filter stage 0: 20.00 ms
(**) ImExPS/2 Logitech Explorer Mouse: (accel) set acceleration profile 0
(II) config/hal: Adding input device AT Translated Set 2 keyboard
(**) AT Translated Set 2 keyboard: always reports core events
(**) AT Translated Set 2 keyboard: Device: "/dev/input/event1"
(II) AT Translated Set 2 keyboard: Found keys
(II) AT Translated Set 2 keyboard: Configuring as keyboard
(II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) Macintosh mouse button emulation: Close
(II) UnloadModule: "evdev"
(II) ImExPS/2 Logitech Explorer Mouse: Close
(II) UnloadModule: "evdev"
(II) AT Translated Set 2 keyboard: Close
(II) UnloadModule: "evdev"
Output CRT1 disable success
Blank CRTC 0 success
Disable CRTC 0 success
Blank CRTC 1 success
Disable CRTC 1 success
(II) RADEON(0): RADEONRestoreMemMapRegisters() :
(II) RADEON(0): MC_FB_LOCATION : 0xefffe000 0xefffe000
(II) RADEON(0): MC_AGP_LOCATION : 0x003f0000
(II) RADEON(0): avivo_restore !
Enable CRTC 0 success
Unblank CRTC 0 success
(II) RADEON(0): [drm] removed 1 reserved context for kernel
(II) RADEON(0): [drm] unmapping 8192 bytes of SAREA 0xf802f000 at 0xb79a0000
(II) RADEON(0): [drm] Closed DRM master.
Last edited by edenxavier (2009-07-28 03:31:10)

[Solved] Synaptics + New Xorg

Hi!
I'm having problems with my synaptics touchpad configuration. I've read some of the topics on the bbs, but none really helped. I'm now stuck with enabling the driver for Xorg (I think), because it seems that while it's configured properly - at least for HAL:
25: udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input'
input.x11_options.MaxSpeed = '0.70' (string)
input.x11_options.AccelFactor = '0.00150' (string)
input.x11_options.SHMConfig = 'on' (string)
input.x11_options.VertTwoFingerScroll = '1' (string)
input.device = '/dev/input/event5' (string)
input.x11_options.HorizTwoFingerScroll = '1' (string)
input.product = 'SynPS/2 Synaptics TouchPad' (string)
input.x11_options.VertEdgeScroll = '1' (string)
linux.hotplug_type = 2 (0x2) (int)
info.subsystem = 'input' (string)
input.x11_options.HorizEdgeScroll = '1' (string)
linux.subsystem = 'input' (string)
info.product = 'SynPS/2 Synaptics TouchPad' (string)
input.x11_options.TapButton1 = '1' (string)
info.udi = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port_logicaldev_input' (string)
input.x11_options.TapButton2 = '2' (string)
input.x11_options.TapButton3 = '3' (string)
info.capabilities = { 'input', 'input.touchpad' } (string list)
input.originating_device = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
info.category = 'input' (string)
input.x11_driver = 'synaptics' (string)
input.x11_options.Device = '/dev/input/psaux' (string)
input.x11_options.LeftEdge = '1700' (string)
linux.sysfs_path = '/sys/class/input/input5/event5' (string)
input.x11_options.RightEdge = '5300' (string)
info.parent = '/org/freedesktop/Hal/devices/platform_i8042_i8042_AUX3_port' (string)
input.x11_options.TopEdge = '1700' (string)
linux.device_file = '/dev/input/event5' (string)
input.x11_options.BottomEdge = '4200' (string)
input.x11_options.FingerLow = '25' (string)
input.x11_options.FingerHigh = '30' (string)
input.x11_options.MaxTapTime = '180' (string)
input.x11_options.MaxTapMove = '220' (string)
input.x11_options.VertScrollDelta = '100' (string)
input.x11_options.MinSpeed = '0.10' (string)
... It doesn't work in KDE (eg. no tapping, scrolling, and so on). I have some old entries in xorg.conf regarding the touchpad, but I don't think it makes any difference.
Section "InputDevice"
Driver "synaptics"
Identifier "TouchPad"
Option "Device" "/dev/psaux"
Option "Protocol" "auto-dev"
Option "LeftEdge" "1700"
Option "RightEdge" "5300"
Option "TopEdge" "1700"
Option "BottomEdge" "4200"
Option "FingerLow" "25"
Option "FingerHigh" "30"
Option "MaxTapTime" "180"
Option "MaxTapMove" "220"
Option "VertScrollDelta" "100"
Option "MinSpeed" "0.09"
Option "MaxSpeed" "0.18"
Option "AccelFactor" "0.0015"
Option "SHMConfig" "on"
EndSection
And the /etc/hal/fdi/policy/11-x11-synaptics.fdi
<?xml version="1.0" encoding="ISO-8859-1"?>
<deviceinfo version="0.2">
<device>
<match key="info.capabilities" contains="input.touchpad">
<match key="info.product" contains="Synaptics TouchPad">
<merge key="input.x11_driver" type="string">synaptics</merge>
<merge key="input.x11_options.Device" type="string">/dev/input/psaux</merge>
<merge key="input.x11_options.LeftEdge" type="string">120</merge>
<merge key="input.x11_options.LeftEdge" type="string">1700</merge>
<merge key="input.x11_options.RightEdge" type="string">5300</merge>
<merge key="input.x11_options.TopEdge" type="string">1700</merge>
<merge key="input.x11_options.BottomEdge" type="string">4200</merge>
<merge key="input.x11_options.FingerLow" type="string">25</merge>
<merge key="input.x11_options.FingerHigh" type="string">30</merge>
<merge key="input.x11_options.MaxTapTime" type="string">180</merge>
<merge key="input.x11_options.MaxTapMove" type="string">220</merge>
<merge key="input.x11_options.VertScrollDelta" type="string">100</merge>
<merge key="input.x11_options.MinSpeed" type="string">0.10</merge>
<merge key="input.x11_options.MaxSpeed" type="string">0.70</merge>
<merge key="input.x11_options.AccelFactor" type="string">0.00150</merge>
<merge key="input.x11_options.SHMConfig" type="string">on</merge>
<merge key="input.x11_options.VertTwoFingerScroll" type="string">1</merge>
<merge key="input.x11_options.HorizTwoFingerScroll" type="string">1</merge>
<merge key="input.x11_options.VertEdgeScroll" type="string">1</merge>
<merge key="input.x11_options.HorizEdgeScroll" type="string">1</merge>
<merge key="input.x11_options.TapButton1" type="string">1</merge>
<merge key="input.x11_options.TapButton2" type="string">2</merge>
<merge key="input.x11_options.TapButton3" type="string">3</merge>
</match>
<match key="info.product" contains="AlpsPS/2 ALPS">
<merge key="input.x11_driver" type="string">synaptics</merge>
</match>
<match key="info.product" contains="appletouch">
<merge key="input.x11_driver" type="string">synaptics</merge>
</match>
<match key="info.product" contains="bcm5974">
<merge key="input.x11_driver" type="string">synaptics</merge>
</match>
</match>
</device>
</deviceinfo>
I don't have any entries in xorg.conf like disabling AutoAddDevices, keyboard is now working as a "evdev-configured keybord", but the touchpad refuses to cooperate with new xorg
Last edited by lateralus (2008-12-05 18:26:50)

stephelton wrote:Explain to me how this is solved. By removing all the configuration options, you lose your configuration. So if the goal of this post is to preserve configuration, and that clearly doesn't happen, this cannot possibly be "solved."
To each their own...there's no need to justify contentedness.
stephelton wrote:More to the point -- how does one go about restoring functionality? Is there some documentation I might find helpful? Why isn't this on the front page? Even after turning off the new HAL based hardware detection it didn't work as it used to.
Hmm, perhaps you would find the Synaptics ArchWiki article helpful. All this Hal nonsense aside, the core synaptics drivers has changed and some settings need to be adjusted accordingly--the wiki has those details.

[SOLVED] Nvidia device setting in the new Xorg (w/ hotplug enabled)

Section "Device"
Identifier "Card0"
Driver "nvidia"
VendorName "nVidia Corporation"
BoardName "G70 [GeForce Go 7800 GTX]"
Option "NoLogo"
Option "DPMS" "True"
Option "RenderAccel" "True"
Option "DPI" "96x96"
Option "TripleBuffer" "True"
Option "BackingStore" "True"
Option "DamageEvents" "True"
Option "OnDemandVBlankInterrupts" "True"
EndSection
How/where do I set these when using the new xorg server with hotplug support?
Last edited by keerthi (2008-12-01 16:24:34)

mutlu_inek wrote:
Nope. The nvidia module doesn't actually work. See the announcement on www.archlinux.org
People should really subscribe to the RSS feed.
People need to stop saying the nvidia module doesn't work. It's the version supporting older cards that doesn't. (nvidia-71xx is no longer supported)

[SOLVED, PARTIALLY] Xorg 1.5 leaves me with freezed and colored screen

I was using xorg-server 1.4 with xf86-video-i810 and xf86-input-keyboard 1.3.1 and it was fine. Today, I upgrade my system and xf86-input-keyboard was upgrade to 1.3.2. With this upgrade, I was able to log into X but my keyboard was unusable. And since I do not have the old package of xf86-input-keyboard (version 1.3.1) in my hard disk, I am unable to go back.
So, I tried to upgrade my system completely including xorg-server 1.4 to 1.5 and xf86-video-i810 to xf86-video-intel. Then I tried starting up X and it gives a colorful screen with vertical lines.
Searched forum a bit and came to know that I can remove my xorg.conf since new xorg detects things on its own. Hence, I deleted xorg.conf and enabled hal in rc.conf. But this also gave me the same result.
Thirdly, I tried removing xbindkeys since there was some mention that it creates problem when starting up with X, but to no avail.
Finally, I tried using "hwd -u" and "hwd -xa" to get an xorg.conf as it was mentioned in some post. it too did not work.
Can someone help me get out of this mess. I'm not able to post links to other posts or my xorg log since I'm on links to browse net and using it first time.
Waiting for your help.[
Last edited by ravisghosh (2009-02-27 00:23:15)

After trying lot of things and not being able to get xorg-server 1.5 work with my system, the only way remaining was to build xf86-input-keyboard 1.3.1 using abs. Here is how I did it (will help those who does not know how to build using abs just as I did not know).
copy the following files in a folder.
/var/abs/extra/xf86-input-keyboard/PKGBUILD
/var/abs/extra/xf86-input-keyboard/new-server.patch
open PKGBUILD file using some editor, e.g. nano. and change the following lines to look like this
pkgver=1.3.1
pkgrel=1
Note, the version and release has to be changed.
Now run this command
makepkg
This will download a file and after a while you will get the following error:
validating source files with md5sums
xf86-input-keyboard-1.3.1.tar.gz FAILED
Now run the following command
md5sum -t xf86-input-keyboard-1.3.1.tar.gz
THis will give a long series of letters and numbers. Note that down and again open PKGBUILD file. Go to the end of the file and you will find 2 similar series of numbers and letters. Replace the first series with the number you have noted down. Save the file and exit.
Now again run
makepkg
This time, the process will continue and will not fail. You will get the installation file in the same directory, named like xf86-input-keyboard-1.3.1-1-i686.pkg.tar.gz.
now, install this file
pacman -U xf86-input-keyboard-1.3.1-1-i686.pkg.tar.gz
Do the same for other files, i.e., xorg-server 1.4 and xf86-video-i810-1.7.4, etc., if you happen to not have them in your hard disk.

[Solved] Compiling Xorg-server 1.6.3.901.

Hello Toaday I wanted to build new xorg-server package with this PKGBUILD:
5 pkgname=xorg-server
6 pkgver=1.6.3.901
7 pkgrel=1
8 pkgdesc="X.Org X servers"
9 arch=('i686' 'x86_64')
10 license=('custom')
11 url="http://xorg.freedesktop.org"
12 depends=('libxfont>=1.4.0' 'openssl>=0.9.8k' 'libpciaccess>=0.10.8' 'libxv>=1.0.4' 'pixman>=0.16.0' 'xkeyboard-config>=1.6' 'xorg-serve
13 makedepends=('glproto' 'libx11>=1.2.2' 'mesa>=7.5.1' 'xf86driproto>=2.1.0' 'xtrans>=1.2.4' 'libxkbfile>=1.0.5' 'randrproto>=1.3.0' 'ren
14 conflicts=('catalyst-utils<=9.2')
15 options=('!libtool')
16 provides=('x-server')
17 groups=('xorg')
18 install=xorg-server.install
19 source=(${url}/releases/individual/xserver/${pkgname}-${pkgver}.tar.bz2
20 xorg-redhat-die-ugly-pattern-die-die-die.patch
21 dpms-dont-reset-lastdeviceeventtime.patch
22 dri2-dontcrash.patch
23 xinerama.patch
24 dga.patch
25 xvfb-run
26 xvfb-run.1)
27 md5sums=('8d43c4cb43e6a10550e68fbbcad10e9d'
28 '1a336eb22e27cbf443ec5a2ecddfa93c'
29 '9ea2e9f5a7192da23c5c573545fe9836'
30 '03cd32862fbfe5f493e108ee7205ade6'
31 '060aaa85d64d26915783e9f6837a666c'
32 'f426f93dfec972ba6f641a8e7d6a9256'
33 '52fd3effd80d7bc6c1660d4ecf23d31c'
34 '376c70308715cd2643f7bff936d9934b')
35
36 build() {
37 cd "${srcdir}/${pkgname}-${pkgver}"
38 # Get rid of the ugly pattern
39 patch -Np3 -i "${srcdir}/xorg-redhat-die-ugly-pattern-die-die-die.patch" || return 1
40
41 # Build fixes for new protos
42 patch -Np1 -i "${srcdir}/xinerama.patch" || return 1
43 patch -Np1 -i "${srcdir}/dga.patch" || return 1
44
45 # Fixes from http://wiki.x.org/wiki/Server16Branch
46 patch -Np1 -i "${srcdir}/dpms-dont-reset-lastdeviceeventtime.patch" || return 1
47 patch -Np1 -i "${srcdir}/dri2-dontcrash.patch" || return 1
48
49 # Fix dbus config path
50 sed -i -e 's/\$(sysconfdir)/\/etc/' config/Makefile.* || return 1
51
52 ./configure --prefix=/usr \
53 --disable-dri2 \
54 --disable-ipv6 \
55 --disable-dri \
56 --disable-dmx \
57 --disable-xvfb \
58 --disable-xnest \
59 --disable-composite \
60 --disable-xcsecurity \
61 --enable-xorg \
62 --disable-xephyr \
63 --disable-glx-tls \
64 --disable-kdrive \
65 --enable-install-setuid \
66 --disable-config-hal \
67 --enable-config-dbus \
68 --disable-record \
69 --disable-xfbdev \
70 --disable-xfake \
71 --disable-xsdl \
72 --disable-static \
73 --sysconfdir=/etc/X11 \
74 --localstatedir=/var \
75 --with-default-font-path=/usr/share/fonts/misc,/usr/share/fonts/100dpi:unscaled,/usr/share/fonts/75dpi:unscaled,/usr/shar
76 --with-xkb-path=/usr/share/X11/xkb \
77 --with-xkb-output=/var/lib/xkb \
78 --without-dri-driver || return 1
79
80 make || return 1
81 make DESTDIR="${pkgdir}" install || return 1
82
83 install -m755 "${srcdir}/xvfb-run" "${pkgdir}/usr/bin/" || return 1
84 install -m644 "${srcdir}/xvfb-run.1" "${pkgdir}/usr/share/man/man1/" || return 1
85
86 rm -rf "${pkgdir}/var/log" || return 1
87
88 install -m755 -d "${pkgdir}/etc/X11" || return 1
89 install -m755 -d "${pkgdir}/var/lib/xkb" || return 1
90
91 # Needed for non-mesa drivers, libgl will restore it
92 mv "${pkgdir}/usr/lib/xorg/modules/extensions/libglx.so" \
93 "${pkgdir}/usr/lib/xorg/modules/extensions/libglx.xorg" || return 1
94
95 install -m755 -d "${pkgdir}/usr/share/licenses/${pkgname}"
96 install -m644 COPYING "${pkgdir}/usr/share/licenses/${pkgname}/" || return 1
And while compiling I got error:
/home/user/abs/xorg-server/PKGBUILD: line 77: --with-xkb-path=/usr/share/X11/xkb: No such file or direcotry
Last edited by SpeedVin (2009-09-06 14:00:23)

Heh I missed some part of like like flamelab said , how I do that?
Some time ago I created my own PKGBUILD for xorg-server and toady I want to update it becouse I see some difreces between my PKGBUILD and PKGBUILD from abs tree and I copy the difrrent line
Thanks Perry3D and big thanks to flamelab.

New Xorg bad

It seems new xorg 7.3 is breaking my system here and there .
1) My mouse has stopped working:http://bbs.archlinux.org/viewtopic.php?id=39494
2) Java applications not working http://bbs.archlinux.org/viewtopic.php?id=39523
This gives me a feeling that archlinux is sacrificing quality in the name of bleeding edge.:(

brain0 wrote:For all of us who actually used it, it was fine. So, among the Arch devs, it was common knowledge that the new version is fine.
First: thank you for your work as a developer. I really appreciate it.
Second: The only issue I have encountered thus far after the Xorg upgrade is related to JAVA apps' assertion failures, and the posted workaround seems to be a viable [shot-term] solution until the offending JAVA apps are fixed.
Now, to the meat: your post says that the new version of Xorg (and all related, updated components) is fine per testing done by those who participated in the testing phase. But the upgrade has obviously created an array of issues, even if the issues are not all direct bugs of Xorg (i.e., they may be issues with applications that use Xorg ... though the apps worked with previous Xorg versions), or the issues may "simply" require reconfiguring xorg.conf.
So, with that in mind, do the developers have an obligation to more thoroughly document the potential issues that upgrading may cause? Or is it simply a matter of adopting the philosophy that issues not classified as technically "bugs", even though they may adversely impact users, do not warrant reporting?
These questions are especially relevant when the issues affect such basic PC operations as JAVA applications, video display and input device functionality, all of which must have been encountered and noted during testing. The Arch News bulletin certainly fell short of this reporting:
http://www.archlinux.org/news/363/
X.org 7.3 hits [extra]
After a testing period for over one month we made the decision to move X.org 7.3 to our stable package repositories. Thanks to all the testers and reporters who enabled us to wipe out most of the major issues.
Please note that libgl-dri has been renamed to libgl since the deprecation of libgl-mesa happened a long time ago already. That means people packaging for the AUR should finally get rid of any hard dependencies on libgl-dri or else their packages will be left broken.
That certainly paints a rosier picture than what users encountered after the upgrade. I don't see "beware, lots of JAVA apps will break" or "you may have to learn to configure xorg.conf all over again" in that news release.
So, I'm just curious what your take is on providing a little more information when these big-package upgrades are pushed out so that users can make informed decisions about how to proceed (of course, making backups first is always good ... which I did).
Thanks.

[SOLVED] Getting Xorg + nVidia, on a new install, working

Hi there,
Lately, I've been trying something new: running with a modern GPU. *gasp!* ...but I've been running into some trouble. I'm hoping someone can help or at least point me in the right direction.
The situation:
I recently put Arch on a new machine of mine. It has an nVidia card (a 560 Ti) on a Gigabyte mobo and I'm trying to get X running on it.
Whenever I try starting X (be it with Startx or GDM), it complains it can't find a screen. It wasn't detecting the nvidia driver on it's own so I tried a minimal xorg.conf to help things along. It's not complaining about not finding drivers anymore (which is a plus), but X is still, as mentioned, failing to start.
I understand that nvidia-xconfig is supposed to be an out dated tool, so I've avoided using it so far. Nvidia-settings takes an X environment to work, so I can't use that either. I thought that might mean I need to get X working before I can try configuring it, so I tried getting X working with one of the generic drivers via the mobo's integrated card, but vesa just freezes the server on me and the Intel driver's dependencies conflict with nvidia.
None of the logs seemed toto give any clues. They are pretty much the same as the stdout for Xorg, lol. I'll try posting logs as needed...all logs will be at the end of this post.
The wiki touches on the install a bit, but than goes into tweeking and other tips for a working setup. It may be that I just don't know which key phrases I should be googling, but searches aren't turning up much more.
Suggestions?
----------logs----------
My Xorg.0.log:
[ 1604.874]
X.Org X Server 1.11.4
Release Date: 2012-01-27
[ 1604.874] X Protocol Version 11, Revision 0
[ 1604.874] Build Operating System: Linux 3.2.2-1-ARCH x86_64
[ 1604.874] Current Operating System: Linux Athenix 3.2.5-1-ARCH #1 SMP PREEMPT Tue Feb 7 08:34:36 CET 2012 x86_64
[ 1604.874] Kernel command line: root=/dev/disk/by-uuid/4a54069b-817b-4491-ba35-a906236a780b ro
[ 1604.874] Build Date: 29 January 2012 03:38:00PM
[ 1604.874]
[ 1604.874] Current version of pixman: 0.24.4
[ 1604.874] Before reporting problems, check [url]http://wiki.x.org[/url]
to make sure that you have the latest version.
[ 1604.874] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1604.874] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Feb 16 10:36:28 2012
[ 1604.874] (==) Using config file: "/etc/X11/xorg.conf"
[ 1604.874] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1604.874] (==) No Layout section. Using the first Screen section.
[ 1604.874] (==) No screen section available. Using defaults.
[ 1604.874] (**) |-->Screen "Default Screen Section" (0)
[ 1604.874] (**) | |-->Monitor "<default monitor>"
[ 1604.874] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1604.874] (**) | |-->Device "Device0"
[ 1604.874] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1604.874] (==) Automatically adding devices
[ 1604.874] (==) Automatically enabling devices
[ 1604.874] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1604.874] Entry deleted from font path.
[ 1604.874] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 1604.874] Entry deleted from font path.
[ 1604.874] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1604.874] Entry deleted from font path.
[ 1604.874] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1604.874] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1604.874] Entry deleted from font path.
[ 1604.874] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1604.874] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 1604.874] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1604.874] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1604.875] (II) Loader magic: 0x7ccae0
[ 1604.875] (II) Module ABI versions:
[ 1604.875] X.Org ANSI C Emulation: 0.4
[ 1604.875] X.Org Video Driver: 11.0
[ 1604.875] X.Org XInput driver : 13.0
[ 1604.875] X.Org Server Extension : 6.0
[ 1604.875] (--) PCI:*(0:0:2:0) 8086:0122:1458:d000 rev 9, Mem @ 0xfb800000/4194304, 0xd0000000/268435456, I/O @ 0x0000ff00/64
[ 1604.875] (--) PCI: (0:1:0:0) 10de:1200:1458:3515 rev 161, Mem @ 0xf6000000/33554432, 0xe0000000/134217728, 0xec000000/67108864, I/O @ 0x0000ef00/128, BIOS @ 0x????????/524288
[ 1604.875] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 1604.875] (II) LoadModule: "extmod"
[ 1604.875] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 1604.875] (II) Module extmod: vendor="X.Org Foundation"
[ 1604.875] compiled for 1.11.4, module version = 1.0.0
[ 1604.875] Module class: X.Org Server Extension
[ 1604.875] ABI class: X.Org Server Extension, version 6.0
[ 1604.875] (II) Loading extension MIT-SCREEN-SAVER
[ 1604.875] (II) Loading extension XFree86-VidModeExtension
[ 1604.875] (II) Loading extension XFree86-DGA
[ 1604.875] (II) Loading extension DPMS
[ 1604.875] (II) Loading extension XVideo
[ 1604.875] (II) Loading extension XVideo-MotionCompensation
[ 1604.875] (II) Loading extension X-Resource
[ 1604.875] (II) LoadModule: "dbe"
[ 1604.875] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 1604.875] (II) Module dbe: vendor="X.Org Foundation"
[ 1604.875] compiled for 1.11.4, module version = 1.0.0
[ 1604.875] Module class: X.Org Server Extension
[ 1604.875] ABI class: X.Org Server Extension, version 6.0
[ 1604.875] (II) Loading extension DOUBLE-BUFFER
[ 1604.875] (II) LoadModule: "glx"
[ 1604.876] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1604.881] (II) Module glx: vendor="NVIDIA Corporation"
[ 1604.881] compiled for 4.0.2, module version = 1.0.0
[ 1604.881] Module class: X.Org Server Extension
[ 1604.881] (II) NVIDIA GLX Module 295.20 Mon Feb 6 21:28:16 PST 2012
[ 1604.881] (II) Loading extension GLX
[ 1604.881] (II) LoadModule: "record"
[ 1604.881] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 1604.881] (II) Module record: vendor="X.Org Foundation"
[ 1604.881] compiled for 1.11.4, module version = 1.13.0
[ 1604.881] Module class: X.Org Server Extension
[ 1604.881] ABI class: X.Org Server Extension, version 6.0
[ 1604.881] (II) Loading extension RECORD
[ 1604.881] (II) LoadModule: "dri"
[ 1604.881] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 1604.881] (II) Module dri: vendor="X.Org Foundation"
[ 1604.881] compiled for 1.11.4, module version = 1.0.0
[ 1604.881] ABI class: X.Org Server Extension, version 6.0
[ 1604.881] (II) Loading extension XFree86-DRI
[ 1604.881] (II) LoadModule: "dri2"
[ 1604.881] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1604.881] (II) Module dri2: vendor="X.Org Foundation"
[ 1604.881] compiled for 1.11.4, module version = 1.2.0
[ 1604.881] ABI class: X.Org Server Extension, version 6.0
[ 1604.882] (II) Loading extension DRI2
[ 1604.882] (II) LoadModule: "nvidia"
[ 1604.882] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 1604.882] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 1604.882] compiled for 4.0.2, module version = 1.0.0
[ 1604.882] Module class: X.Org Video Driver
[ 1604.882] (II) NVIDIA dlloader X Driver 295.20 Mon Feb 6 21:09:10 PST 2012
[ 1604.882] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 1604.882] (--) using VT number 7
[ 1604.883] (EE) No devices detected.
[ 1604.883]
Fatal server error:
[ 1604.883] no screens found
[ 1604.883]
Please consult the The X.Org Foundation support
at [url]http://wiki.x.org[/url]
for help.
[ 1604.883] Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 1604.883]
50 line tail of dmesg:
[ 7.803983] HDMI: available speakers: FL/FR
[ 7.803985] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16
[ 7.804025] HDMI hot plug event: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 7.804099] HDMI status: Codec=3 Pin=7 Presence_Detect=1 ELD_Valid=1
[ 7.804194] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 7.804555] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 7.804559] i915 0000:00:02.0: setting latency timer to 64
[ 7.804565] snd_hda_intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 7.804567] hda_intel: Disabling MSI
[ 7.804613] snd_hda_intel 0000:01:00.1: setting latency timer to 64
[ 7.807637] HDMI: detected monitor at connection type HDMI
[ 7.807639] HDMI: available speakers: FL/FR
[ 7.807640] HDMI: supports coding type LPCM: channels = 2, rates = 32000 44100 48000, bits = 16
[ 7.832165] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 7.832167] [drm] MTRR allocation failed. Graphics performance may suffer.
[ 7.832331] i915 0000:00:02.0: irq 45 for MSI/MSI-X
[ 7.832334] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 7.832335] [drm] Driver supports precise vblank timestamp query.
[ 8.370205] scsi 6:0:0:0: CD-ROM NEC CD-ROM DRIVE:282 5.d3 PQ: 0 ANSI: 0 CCS
[ 8.425505] sr0: scsi3-mmc drive: 24x/24x cd/rw xa/form2 cdda tray
[ 8.425507] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 8.425672] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 8.484508] HDMI status: Codec=0 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.504488] fbcon: inteldrmfb (fb0) is primary device
[ 8.511149] HDMI status: Codec=1 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.537788] HDMI status: Codec=2 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.564427] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 8.577802] input: HDA NVidia HDMI/DP,pcm=9 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input7
[ 8.577910] input: HDA NVidia HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input8
[ 8.578012] input: HDA NVidia HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
[ 8.578108] input: HDA NVidia HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input10
[ 8.938485] Console: switching to colour frame buffer device 128x45
[ 8.939719] fb0: inteldrmfb frame buffer device
[ 8.939720] drm: registered panic notifier
[ 8.939767] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 9.376579] device fsid ee16f227-edcc-4369-8508-21a470523a68 devid 1 transid 110 /dev/sda4
[ 9.424068] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
[ 1198.492774] usb 2-1.2: new high-speed USB device number 3 using ehci_hcd
[ 1198.578333] scsi7 : usb-storage 2-1.2:1.0
[ 1199.576258] scsi 7:0:0:0: Direct-Access Motorola A956 0001 PQ: 0 ANSI: 2
[ 1199.577586] scsi 7:0:0:1: CD-ROM Motorola A956 0001 PQ: 0 ANSI: 2
[ 1199.583075] sr1: scsi3-mmc drive: 0x/0x caddy
[ 1199.583198] sr 7:0:0:1: Attached scsi CD-ROM sr1
[ 1199.585182] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 1204.014270] sd 7:0:0:0: [sdb] 15523840 512-byte logical blocks: (7.94 GB/7.40 GiB)
[ 1204.015723] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1204.015750] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1204.018093] sd 7:0:0:0: [sdb] No Caching mode page present
[ 1204.018119] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 1204.022771] sdb: sdb1
EDIT:
Typos & logs.
Last edited by Avant-texte (2012-02-16 17:14:37)

Gusar wrote:Error reports can all be put into files (or are files already), which you can copy to an usb stick and then get them to a machine with working graphics, so no need for transcribing anything. For starters we need /var/log/Xorg.0.log after X failed to start and the output of dmesg. For dmesg you can do a simple redirection "dmesg > file.txt".
Well, woops! I was way too damn tired by the time I said that. Good thing I stop working on my machine when I did, who knows what I would've broken! ...lol. My logs have been included in the end of my orriginal post.
Last edited by Avant-texte (2012-02-16 16:13:56)

[SOLVED] Blinking screen - new Xorg and Intel issue

Screen is blinking after opening laptop lid no matter what i did (nothing, lock screen, hibernate, standby). It blinks every 10-20 seconds for about 1-2 seconds, and cpu% used by X's raises from 0.3-1.0 to even 10% and system slows down a little in that moment. My Xorg logs:
$ cat /var/log/Xorg.0.log
(II) Video Bus: Found keys
(II) Video Bus: Configuring as keyboard
(II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
(II) config/hal: Adding input device Power Button
(**) Power Button: always reports core events
(**) Power Button: Device: "/dev/input/event2"
(II) Power Button: Found keys
(II) Power Button: Configuring as keyboard
(II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
(**) Option "xkb_rules" "evdev"
(**) Option "xkb_model" "evdev"
(**) Option "xkb_layout" "us"
# closing & opening laptop lid
# right after opening (properly i suppose)
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using EDID range info for horizontal sync
(II) intel(0): Using EDID range info for vertical refresh
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
# after 10-20 seconds
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
# over and over...
(II) intel(0): I2C bus "CRTDDC_A" initialized.
(II) intel(0): I2C bus "CRTDDC_A" removed.
(II) intel(0): EDID vendor "CMO", prod id 4609
(II) intel(0): Using hsync ranges from config file
(II) intel(0): Using vrefresh ranges from config file
(II) intel(0): Printing DDC gathered Modelines:
(II) intel(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
(II) intel(0): EDID vendor "CMO", prod id 4609
Blinking stops when i restart computer.
I have newest xorg and intel drivers (xorg-server 1.7.1.901-2 & xf86-video-intel 2.9.1-1). I tried also downgrade this (and related) packages to older versions (even xorg-server 1.5.* & xf86-video-intel 2.4.*) and the same happens... with only one difference. On that oldest packages I've tried screen doesn't blinks, but the wallpaper of the desktop is changing: my -> default -> my -> default... with the same frequency . I was googling a lot, believe me. I study IT on a University and I asked my friends from there, and they just run out of ideas. In addition i can write that it isn't my laptop fault because windows xp works fine and ubuntu 9.04 (i had before archlinux) also worked good. It has started on ubuntu 9.10, so I thought I move to archlinux, and its still here? I suppose its a problem with intel drivers or xorg, but somehow linked with power management of the monitor(?). But why then older packages don't work? Please, I will be grateful for any help.
My /etc/X11/xorg.conf file generated by 'Xorg -configure' command:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
InputDevice "Keyboard0" "CoreKeyboard"
EndSection
Section "Files"
ModulePath "/usr/lib/xorg/modules"
FontPath "/usr/share/fonts/misc"
FontPath "/usr/share/fonts/100dpi:unscaled"
FontPath "/usr/share/fonts/75dpi:unscaled"
FontPath "/usr/share/fonts/TTF"
FontPath "/usr/share/fonts/Type1"
EndSection
Section "Module"
Load "glx"
Load "dri2"
Load "record"
Load "dbe"
Load "dri"
Load "extmod"
EndSection
Section "InputDevice"
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "InputDevice"
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/input/mice"
Option "ZAxisMapping" "4 5 6 7"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Monitor Vendor"
ModelName "Monitor Model"
#Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -HSync -Vsync
EndSection
Section "Device"
### Available Driver options are:-
### Values: : integer, <f>: float, <bool>: "True"/"False",
### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
### [arg]: arg optional
#Option "ShadowFB" # [<bool>]
#Option "DefaultRefresh" # [<bool>]
#Option "ModeSetClearScreen" # [<bool>]
Identifier "Card0"
Driver "intel"
VendorName "Intel Corporation"
BoardName "Mobile 915GM/GMS/910GML Express Graphics Controller"
BusID "PCI:0:2:0"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Card0"
Monitor "Monitor0"
SubSection "Display"
Viewport 0 0
Depth 1
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 4
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 8
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 15
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 16
EndSubSection
SubSection "Display"
Viewport 0 0
Depth 24
EndSubSection
EndSection
Last edited by joda (2009-12-01 09:49:38)

SOLVED!!! Must enable KMS => switch off vga option in grub, and replace it with "i915.moduleset=1"

[SOLVED] new install Xorg not starting

I am running a vm install of arch and I cannot get startx to work. I went through the wiki section "Xorg as a systemd user service" and tried what it suggested and still it would not work. Below is my log file. Anyone have any suggestions? Thanks!
[herminio@archlinux-vm ~]$ cat .local/share/xorg/Xorg.0.log
[ 697.138]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 697.141] X Protocol Version 11, Revision 0
[ 697.143] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 697.144] Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 697.144] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 697.146] Build Date: 10 November 2014 07:52:13PM
[ 697.148]
[ 697.149] Current version of pixman: 0.32.6
[ 697.152] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 697.152] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 697.156] (==) Log file: "/home/herminio/.local/share/xorg/Xorg.0.log", Time: Sat Nov 15 14:29:26 2014
[ 697.158] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 697.158] (==) No Layout section. Using the first Screen section.
[ 697.158] (==) No screen section available. Using defaults.
[ 697.158] (**) |-->Screen "Default Screen Section" (0)
[ 697.158] (**) | |-->Monitor "<default monitor>"
[ 697.158] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 697.158] (==) Automatically adding devices
[ 697.158] (==) Automatically enabling devices
[ 697.158] (==) Automatically adding GPU devices
[ 697.158] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 697.158] Entry deleted from font path.
[ 697.158] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 697.158] Entry deleted from font path.
[ 697.158] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 697.158] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 697.158] Entry deleted from font path.
[ 697.158] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 697.158] (==) FontPath set to:
/usr/share/fonts/misc/
[ 697.158] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 697.158] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 697.158] (II) Loader magic: 0x818d80
[ 697.158] (II) Module ABI versions:
[ 697.158] X.Org ANSI C Emulation: 0.4
[ 697.158] X.Org Video Driver: 18.0
[ 697.158] X.Org XInput driver : 21.0
[ 697.158] X.Org Server Extension : 8.0
[ 697.161] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c1
[ 697.161] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 697.161] (II) systemd-logind: got fd for /dev/dri/card0 226:0 fd 8 paused 0
[ 697.200] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 697.200] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 697.200] (II) LoadModule: "glx"
[ 697.200] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 697.245] (II) Module glx: vendor="NVIDIA Corporation"
[ 697.245] compiled for 4.0.2, module version = 1.0.0
[ 697.245] Module class: X.Org Server Extension
[ 697.245] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 697.246] (==) Matched vmware as autoconfigured driver 0
[ 697.246] (==) Matched vmware as autoconfigured driver 1
[ 697.246] (==) Matched modesetting as autoconfigured driver 2
[ 697.246] (==) Matched fbdev as autoconfigured driver 3
[ 697.246] (==) Matched vesa as autoconfigured driver 4
[ 697.246] (==) Assigned the driver to the xf86ConfigLayout
[ 697.246] (II) LoadModule: "vmware"
[ 697.246] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 697.280] (II) Module vmware: vendor="X.Org Foundation"
[ 697.281] compiled for 1.16.0, module version = 13.0.2
[ 697.281] Module class: X.Org Video Driver
[ 697.281] ABI class: X.Org Video Driver, version 18.0
[ 697.281] (II) LoadModule: "modesetting"
[ 697.281] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
[ 697.281] (II) Module modesetting: vendor="X.Org Foundation"
[ 697.281] compiled for 1.16.0, module version = 0.9.0
[ 697.281] Module class: X.Org Video Driver
[ 697.281] ABI class: X.Org Video Driver, version 18.0
[ 697.281] (II) LoadModule: "fbdev"
[ 697.282] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
[ 697.282] (II) Module fbdev: vendor="X.Org Foundation"
[ 697.282] compiled for 1.16.0, module version = 0.4.4
[ 697.282] Module class: X.Org Video Driver
[ 697.282] ABI class: X.Org Video Driver, version 18.0
[ 697.282] (II) LoadModule: "vesa"
[ 697.282] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
[ 697.282] (II) Module vesa: vendor="X.Org Foundation"
[ 697.282] compiled for 1.16.0, module version = 2.3.2
[ 697.282] Module class: X.Org Video Driver
[ 697.282] ABI class: X.Org Video Driver, version 18.0
[ 697.282] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 697.282] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
[ 697.283] (II) FBDEV: driver for framebuffer: fbdev
[ 697.283] (II) VESA: driver for VESA chipsets: vesa
[ 697.283] (++) using VT number 1
[ 697.283] (--) controlling tty is VT number 1, auto-enabling KeepTty
[ 697.283] xf86EnableIOPorts: failed to set IOPL for I/O (Operation not permitted)
[ 697.283] (WW) Falling back to old probe method for modesetting
[ 697.283] (WW) Falling back to old probe method for fbdev
[ 697.283] (II) Loading sub module "fbdevhw"
[ 697.283] (II) LoadModule: "fbdevhw"
[ 697.283] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
[ 697.283] (II) Module fbdevhw: vendor="X.Org Foundation"
[ 697.283] compiled for 1.16.2, module version = 0.0.2
[ 697.283] ABI class: X.Org Video Driver, version 18.0
[ 697.283] (EE) open /dev/fb0: Permission denied
[ 697.283] (WW) Falling back to old probe method for vesa
[ 697.283] (WW) VGA arbiter: cannot open kernel arbiter, no multi-card support
[ 697.284] (II) vmware(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 697.284] (--) vmware(0): DRM driver version is 2.6.1
[ 697.284] (EE) vmware(0): Failed to detect device screen object capability.
[ 697.284] (WW) vmware(0): Disabling 3D support.
[ 697.284] (WW) vmware(0): Disabling Render Acceleration.
[ 697.284] (WW) vmware(0): Disabling RandR12+ support.
[ 697.284] (--) vmware(0): VMware SVGA regs at (0x1070, 0x1071)
[ 697.284] (II) Loading sub module "vgahw"
[ 697.284] (II) LoadModule: "vgahw"
[ 697.284] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 697.284] (II) Module vgahw: vendor="X.Org Foundation"
[ 697.284] compiled for 1.16.2, module version = 0.1.0
[ 697.284] ABI class: X.Org Video Driver, version 18.0
[ 697.299] (EE)
[ 697.299] (EE) Backtrace:
[ 697.300] (EE) 0: /usr/bin/Xorg.bin (xorg_backtrace+0x56) [0x593d36]
[ 697.300] (EE) 1: /usr/bin/Xorg.bin (0x400000+0x197e89) [0x597e89]
[ 697.300] (EE) 2: /usr/lib/libc.so.6 (0x7f1fe4f6b000+0x339f0) [0x7f1fe4f9e9f0]
[ 697.300] (EE) 3: /usr/lib/libpciaccess.so.0 (pci_io_write8+0x3) [0x7f1fe631a923]
[ 697.300] (EE) 4: /usr/lib/xorg/modules/libvgahw.so (vgaHWSaveColormap+0x5b) [0x7f1fdb2adfbb]
[ 697.300] (EE) 5: /usr/lib/xorg/modules/libvgahw.so (vgaHWSave+0x55) [0x7f1fdb2afd55]
[ 697.300] (EE) 6: /usr/lib/xorg/modules/drivers/vmware_drv.so (0x7f1fdeedc000+0x7dce) [0x7f1fdeee3dce]
[ 697.300] (EE) 7: /usr/bin/Xorg.bin (InitOutput+0xa9f) [0x47a28f]
[ 697.300] (EE) 8: /usr/bin/Xorg.bin (0x400000+0x3b65a) [0x43b65a]
[ 697.300] (EE) 9: /usr/lib/libc.so.6 (__libc_start_main+0xf0) [0x7f1fe4f8b040]
[ 697.300] (EE) 10: /usr/bin/Xorg.bin (0x400000+0x25d0e) [0x425d0e]
[ 697.300] (EE)
[ 697.300] (EE) Segmentation fault at address 0x8
[ 697.300] (EE)
Fatal server error:
[ 697.300] (EE) Caught signal 11 (Segmentation fault). Server aborting
[ 697.300] (EE)
[ 697.300] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 697.300] (EE) Please also check the log file at "/home/herminio/.local/share/xorg/Xorg.0.log" for additional information.
[ 697.300] (EE)
[ 697.308] (EE) Server terminated with error (1). Closing log file.
[herminio@archlinux-vm ~]$
Last edited by rican-linux (2014-11-17 07:45:54)

Here are the packages I installed
[herminio@archlinux-vm ~]$ sudo pacman -Q | grep xf86-video
xf86-video-ark 0.7.5-5
xf86-video-ast 0.97.0-5
xf86-video-ati 1:7.5.0-1
xf86-video-cirrus 1.5.2-4
xf86-video-dummy 0.3.7-3
xf86-video-fbdev 0.4.4-3
xf86-video-glint 1.2.8-5
xf86-video-i128 1.3.6-5
xf86-video-intel 2.99.916-3
xf86-video-mach64 6.9.4-4
xf86-video-mga 1.6.3-3
xf86-video-modesetting 0.9.0-2
xf86-video-neomagic 1.2.8-3
xf86-video-nouveau 1.0.11-2
xf86-video-nv 2.1.20-5
xf86-video-openchrome 0.3.3-4
xf86-video-r128 6.9.2-3
xf86-video-savage 2.3.7-3
xf86-video-siliconmotion 1.7.7-5
xf86-video-sis 0.10.7-6
xf86-video-tdfx 1.4.5-5
xf86-video-trident 1.3.6-6
xf86-video-v4l 0.2.0-14
xf86-video-vesa 2.3.2-5
xf86-video-vmware 13.0.2-2
xf86-video-voodoo 1.2.5-5
I made some edits to the org.conf and now I am seeing this:
[herminio@archlinux-vm ~]$ startx
X.Org X Server 1.16.2
Release Date: 2014-11-10
X Protocol Version 11, Revision 0
Build Operating System: Linux 3.17.2-1-ARCH x86_64
Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
Build Date: 10 November 2014 07:52:13PM
Current version of pixman: 0.32.6
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 16:08:43 2014
(==) Using config file: "/etc/X11/xorg.conf"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
VMware: No 3D enabled (0, Success).
^Cxinit: connection to X server lost
waiting for X server to shut down XIO: fatal IO error 0 (Success) on X server ":0"
after 896 requests (896 known processed) with 0 events remaining.
xterm: fatal IO error 11 (Resource temporarily unavailable) or KillClient on X server ":0"
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0"
xterm: fatal IO error 104 (Connection reset by peer) or KillClient on X server ":0"
(EE) Server terminated successfully (0). Closing log file.
xinit: unexpected signal 2
Couldn't get a file descriptor referring to the console
[herminio@archlinux-vm ~]$ cat /var/log/Xorg.0.log
[ 2861.854]
X.Org X Server 1.16.2
Release Date: 2014-11-10
[ 2861.854] X Protocol Version 11, Revision 0
[ 2861.854] Build Operating System: Linux 3.17.2-1-ARCH x86_64
[ 2861.855] Current Operating System: Linux archlinux-vm 3.17.2-1-ARCH #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014 x86_64
[ 2861.855] Kernel command line: BOOT_IMAGE=../vmlinuz-linux root=/dev/sda1 rw initrd=../initramfs-linux.img
[ 2861.855] Build Date: 10 November 2014 07:52:13PM
[ 2861.856]
[ 2861.856] Current version of pixman: 0.32.6
[ 2861.856] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 2861.856] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 2861.858] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Nov 15 16:08:43 2014
[ 2861.859] (==) Using config file: "/etc/X11/xorg.conf"
[ 2861.860] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 2861.860] (==) ServerLayout "X.org Configured"
[ 2861.860] (**) |-->Screen "Screen0" (0)
[ 2861.860] (**) | |-->Monitor "Monitor0"
[ 2861.860] (**) | |-->Device "Card0"
[ 2861.860] (**) |-->Input Device "Mouse0"
[ 2861.860] (**) |-->Input Device "Keyboard0"
[ 2861.860] (==) Automatically adding devices
[ 2861.860] (==) Automatically enabling devices
[ 2861.860] (==) Automatically adding GPU devices
[ 2861.860] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2861.860] Entry deleted from font path.
[ 2861.860] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 2861.860] Entry deleted from font path.
[ 2861.860] (**) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 2861.860] (**) ModulePath set to "/usr/lib/xorg/modules"
[ 2861.860] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 2861.860] (WW) Disabling Mouse0
[ 2861.860] (WW) Disabling Keyboard0
[ 2861.860] (II) Loader magic: 0x818d80
[ 2861.860] (II) Module ABI versions:
[ 2861.860] X.Org ANSI C Emulation: 0.4
[ 2861.860] X.Org Video Driver: 18.0
[ 2861.860] X.Org XInput driver : 21.0
[ 2861.860] X.Org Server Extension : 8.0
[ 2861.863] (II) systemd-logind: took control of session /org/freedesktop/login1/session/c2
[ 2861.864] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 2861.865] (EE) systemd-logind: failed to take device /dev/dri/card0: Operation not permitted
[ 2861.886] (--) PCI:*(0:0:15:0) 15ad:0405:15ad:0405 rev 0, Mem @ 0xe8000000/134217728, 0xfe000000/8388608, I/O @ 0x00001070/16, BIOS @ 0x????????/32768
[ 2861.886] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 2861.886] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 2861.886] (II) LoadModule: "glx"
[ 2861.887] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 2861.931] (II) Module glx: vendor="NVIDIA Corporation"
[ 2861.931] compiled for 4.0.2, module version = 1.0.0
[ 2861.931] Module class: X.Org Server Extension
[ 2861.931] (II) NVIDIA GLX Module 343.22 Thu Sep 11 15:55:13 PDT 2014
[ 2861.931] (II) LoadModule: "vmware"
[ 2861.932] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 2861.959] (II) Module vmware: vendor="X.Org Foundation"
[ 2861.959] compiled for 1.16.0, module version = 13.0.2
[ 2861.959] Module class: X.Org Video Driver
[ 2861.959] ABI class: X.Org Video Driver, version 18.0
[ 2861.959] (II) LoadModule: "vmware"
[ 2861.959] (II) Loading /usr/lib/xorg/modules/drivers/vmware_drv.so
[ 2861.959] (II) Module vmware: vendor="X.Org Foundation"
[ 2861.959] compiled for 1.16.0, module version = 13.0.2
[ 2861.959] Module class: X.Org Video Driver
[ 2861.959] ABI class: X.Org Video Driver, version 18.0
[ 2861.959] (II) UnloadModule: "vmware"
[ 2861.959] (II) Unloading vmware
[ 2861.959] (II) Failed to load module "vmware" (already loaded, 0)
[ 2861.959] (II) vmware: driver for VMware SVGA: vmware0405, vmware0710
[ 2861.959] (--) using VT number 2
[ 2861.963] (--) vmware(0): DRM driver version is 2.6.1
[ 2861.963] (==) vmware(0): Depth 24, (--) framebuffer bpp 32
[ 2861.963] (==) vmware(0): RGB weight 888
[ 2861.963] (==) vmware(0): Default visual is TrueColor
[ 2861.963] (--) vmware(0): Min width 1, Max Width 8192.
[ 2861.963] (--) vmware(0): Min height 1, Max Height 8192.
[ 2861.964] (II) vmware(0): Output Virtual1 using monitor section Monitor0
[ 2861.964] (II) vmware(0): Output Virtual2 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual3 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual4 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual5 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual6 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual7 has no monitor section
[ 2861.964] (II) vmware(0): Output Virtual8 has no monitor section
[ 2861.964] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 2861.964] (II) vmware(0): Printing probed modes for output Virtual1
[ 2861.964] (II) vmware(0): Modeline "1280x768"x60.0 78.76 1280 1330 1380 1430 768 818 868 918 -hsync +vsync (55.1 kHz eP)
[ 2861.964] (II) vmware(0): Modeline "2560x1600"x60.0 348.50 2560 2752 3032 3504 1600 1603 1609 1658 -hsync +vsync (99.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1440"x60.0 234.00 1920 2048 2256 2600 1440 1441 1444 1500 -hsync +vsync (90.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1856x1392"x60.0 218.25 1856 1952 2176 2528 1392 1393 1396 1439 -hsync +vsync (86.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1792x1344"x60.0 204.75 1792 1920 2120 2448 1344 1345 1348 1394 -hsync +vsync (83.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1920x1200"x59.9 193.25 1920 2056 2256 2592 1200 1203 1209 1245 -hsync +vsync (74.6 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1400x1050"x60.0 121.75 1400 1488 1632 1864 1050 1053 1057 1089 -hsync +vsync (65.3 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1440x900"x59.9 106.50 1440 1520 1672 1904 900 903 909 934 -hsync +vsync (55.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1360x768"x60.0 85.50 1360 1424 1536 1792 768 771 777 795 +hsync +vsync (47.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x800"x59.8 83.50 1280 1352 1480 1680 800 803 809 831 +hsync -vsync (49.7 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1280x768"x59.9 79.50 1280 1344 1472 1664 768 771 778 798 -hsync +vsync (47.8 kHz e)
[ 2861.964] (II) vmware(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 2861.964] (II) vmware(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 2861.964] (II) vmware(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 489 492 525 -hsync -vsync (31.5 kHz e)
[ 2861.964] (II) vmware(0): EDID for output Virtual2
[ 2861.965] (II) vmware(0): EDID for output Virtual3
[ 2861.965] (II) vmware(0): EDID for output Virtual4
[ 2861.965] (II) vmware(0): EDID for output Virtual5
[ 2861.965] (II) vmware(0): EDID for output Virtual6
[ 2861.965] (II) vmware(0): EDID for output Virtual7
[ 2861.965] (II) vmware(0): EDID for output Virtual8
[ 2861.965] (II) vmware(0): Output Virtual1 connected
[ 2861.965] (II) vmware(0): Output Virtual2 disconnected
[ 2861.965] (II) vmware(0): Output Virtual3 disconnected
[ 2861.965] (II) vmware(0): Output Virtual4 disconnected
[ 2861.965] (II) vmware(0): Output Virtual5 disconnected
[ 2861.965] (II) vmware(0): Output Virtual6 disconnected
[ 2861.965] (II) vmware(0): Output Virtual7 disconnected
[ 2861.965] (II) vmware(0): Output Virtual8 disconnected
[ 2861.965] (II) vmware(0): Using exact sizes for initial modes
[ 2861.965] (II) vmware(0): Output Virtual1 using initial mode 1280x768
[ 2861.965] (II) vmware(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 2861.965] (==) vmware(0): DPI set to (96, 96)
[ 2861.965] (II) Loading sub module "fb"
[ 2861.965] (II) LoadModule: "fb"
[ 2861.965] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 2861.965] (II) Module fb: vendor="X.Org Foundation"
[ 2861.965] compiled for 1.16.2, module version = 1.0.0
[ 2861.965] ABI class: X.Org ANSI C Emulation, version 0.4
[ 2861.965] (II) Loading sub module "dri2"
[ 2861.965] (II) LoadModule: "dri2"
[ 2861.965] (II) Module "dri2" already built-in
[ 2861.965] (==) Depth 24 pixmap format is 32 bpp
[ 2861.966] (II) vmware(0): Initialized VMWARE_CTRL extension version 0.2
[ 2861.967] (WW) vmware(0): Failed to initialize Gallium3D Xa. No render acceleration available.
[ 2861.967] (WW) vmware(0): Skipped initialization of direct rendering due to lack of render acceleration.
[ 2861.967] (--) vmware(0): Render acceleration is disabled.
[ 2861.967] (==) vmware(0): Rendercheck mode is disabled.
[ 2861.967] (--) vmware(0): Direct rendering (3D) is disabled.
[ 2861.967] (==) vmware(0): Backing store enabled
[ 2861.967] (==) vmware(0): Silken mouse enabled
[ 2861.967] (II) vmware(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 2861.967] (==) vmware(0): DPMS enabled
[ 2861.967] (II) vmware(0): No 3D acceleration. Not setting up textured video.
[ 2861.967] (--) RandR disabled
[ 2861.981] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 2862.011] (II) vmware(0): Setting screen physical size to 338 x 203
[ 2862.235] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 2862.235] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 2862.235] (II) LoadModule: "evdev"
[ 2862.235] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 2862.236] (II) Module evdev: vendor="X.Org Foundation"
[ 2862.236] compiled for 1.16.0, module version = 2.9.0
[ 2862.236] Module class: X.Org XInput Driver
[ 2862.236] ABI class: X.Org XInput driver, version 21.0
[ 2862.237] (EE) systemd-logind: failed to take device /dev/input/event1: Operation not permitted
[ 2862.237] (II) Using input driver 'evdev' for 'Power Button'
[ 2862.237] (**) Power Button: always reports core events
[ 2862.237] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 2862.237] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 2862.237] (--) evdev: Power Button: Found keys
[ 2862.237] (II) evdev: Power Button: Configuring as keyboard
[ 2862.237] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input2/event1"
[ 2862.237] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 2862.237] (**) Option "xkb_rules" "evdev"
[ 2862.237] (**) Option "xkb_model" "pc104"
[ 2862.237] (**) Option "xkb_layout" "us"
[ 2862.284] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/event3)
[ 2862.284] (**) VMware VMware Virtual USB Mouse: Applying InputClass "evdev pointer catchall"
[ 2862.285] (EE) systemd-logind: failed to take device /dev/input/event3: Operation not permitted
[ 2862.285] (II) Using input driver 'evdev' for 'VMware VMware Virtual USB Mouse'
[ 2862.285] (**) VMware VMware Virtual USB Mouse: always reports core events
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: Device: "/dev/input/event3"
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Vendor 0xe0f Product 0x3
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found 12 mouse buttons
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found scroll wheel(s)
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found relative axes
[ 2862.285] (--) evdev: VMware VMware Virtual USB Mouse: Found x and y relative axes
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: Configuring as mouse
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: Adding scrollwheel support
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: YAxisMapping: buttons 4 and 5
[ 2862.285] (**) evdev: VMware VMware Virtual USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 2862.285] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:11.0/0000:02:00.0/usb2/2-1/2-1:1.0/0003:0E0F:0003.0001/input/input5/event3"
[ 2862.285] (II) XINPUT: Adding extended input device "VMware VMware Virtual USB Mouse" (type: MOUSE, id 7)
[ 2862.285] (II) evdev: VMware VMware Virtual USB Mouse: initialized for relative axes.
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) keeping acceleration scheme 1
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration profile 0
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration factor: 2.000
[ 2862.285] (**) VMware VMware Virtual USB Mouse: (accel) acceleration threshold: 4
[ 2862.286] (II) config/udev: Adding input device VMware VMware Virtual USB Mouse (/dev/input/mouse0)
[ 2862.286] (II) No input driver specified, ignoring this device.
[ 2862.286] (II) This device may have been added with another device file.
[ 2862.286] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 2862.286] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 2862.286] (EE) systemd-logind: failed to take device /dev/input/event0: Operation not permitted
[ 2862.286] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 2862.286] (**) AT Translated Set 2 keyboard: always reports core events
[ 2862.286] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 2862.286] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 2862.286] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 2862.286] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 2862.286] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 2862.286] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 8)
[ 2862.286] (**) Option "xkb_rules" "evdev"
[ 2862.286] (**) Option "xkb_model" "pc104"
[ 2862.286] (**) Option "xkb_layout" "us"
[ 2862.287] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/event4)
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "evdev pointer catchall"
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: Applying InputClass "vmmouse"
[ 2862.287] (II) LoadModule: "vmmouse"
[ 2862.287] (II) Loading /usr/lib/xorg/modules/input/vmmouse_drv.so
[ 2862.287] (II) Module vmmouse: vendor="X.Org Foundation"
[ 2862.287] compiled for 1.16.0, module version = 13.0.0
[ 2862.287] Module class: X.Org XInput Driver
[ 2862.287] ABI class: X.Org XInput driver, version 21.0
[ 2862.287] (II) VMWARE(0): VMMOUSE module was loaded
[ 2862.287] (II) Using input driver 'vmmouse' for 'ImPS/2 Generic Wheel Mouse'
[ 2862.287] (**) ImPS/2 Generic Wheel Mouse: always reports core events
[ 2862.288] (II) VMWARE(0): vmmouse is available
[ 2862.288] (**) Option "Device" "/dev/input/event4"
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: ZAxisMapping: buttons 4 and 5
[ 2862.334] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input4/event4"
[ 2862.334] (II) XINPUT: Adding extended input device "ImPS/2 Generic Wheel Mouse" (type: MOUSE, id 9)
[ 2862.334] (II) VMWARE(0): VMMOUSE DEVICE_INIT
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) keeping acceleration scheme 1
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration profile 0
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration factor: 2.000
[ 2862.334] (**) ImPS/2 Generic Wheel Mouse: (accel) acceleration threshold: 4
[ 2862.334] (II) VMWARE(0): VMMOUSE DEVICE_ON
[ 2862.334] (II) VMWARE(0): vmmouse enabled
[ 2862.335] (II) config/udev: Adding input device ImPS/2 Generic Wheel Mouse (/dev/input/mouse1)
[ 2862.335] (II) No input driver specified, ignoring this device.
[ 2862.335] (II) This device may have been added with another device file.
[ 2862.336] (II) config/udev: Adding input device PC Speaker (/dev/input/event2)
[ 2862.336] (II) No input driver specified, ignoring this device.
[ 2862.336] (II) This device may have been added with another device file.
[ 2865.760] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE
[ 2865.883] (II) VMWARE(0): VMMOUSE DEVICE_OFF/CLOSE
[ 2866.184] (II) VMWARE(0): VMMouseUnInit
[ 2866.184] (II) evdev: AT Translated Set 2 keyboard: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.184] (II) evdev: VMware VMware Virtual USB Mouse: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.184] (II) evdev: Power Button: Close
[ 2866.184] (II) UnloadModule: "evdev"
[ 2866.219] (EE) Server terminated successfully (0). Closing log file.
[herminio@archlinux-vm ~]$

[SOLVED]New Build, no sound, Alsa unable to open slave

I've been happily using Arch on an old laptop I had lying around for 4/5 months, alongside ARM on my Raspberry Pi for a year or so. Being more than happy with it I decided to sell my 2011 i5 iMac, build a pc and hopefully learn something along the way. I mention this as it's my first build and the issue may be hardware realted, or more likely my assembly of the hardware, I've updated my sig to reflect the new parts.
The first decision I made two days ago upon putting the system together. I had two plugs, one for HD audio, another for Realtek audio, I went with the HD option. The other variable that is new to me is an audio option in the Gigabyte uefi/bios for audio which has options for enabled, disabled & auto - I've tried all three. I thought at first going with HD option may have meant sound only via hdmi, I'm using an old vga monitor, but after a little reading it seems the HD option should work with the standard audio out's on the motherboard & case too.
I've got a 3.5mm jack plugged into the line out on the back of the motherboard going to a phono connection on my stereo, I've also tried the headphone out on the front of the case, Zalman Z9.
I've installed alsa-plugins and alsa-utils. Upon running speaker-test, or speaker-test -c 2 I'm getting:
speaker-test -c 2
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
Using aplay:
aplay piano2.wav
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
aplay: main:722: audio open error: No such file or directory
Some info:
lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 30162 1
snd_hda_codec_realtek 40772 1
snd_hda_intel 36904 0
snd_hda_codec 149633 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77709 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59173 7 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Dec 1 19:31 by-path
crw-rw----+ 1 root audio 116, 13 Dec 1 19:31 controlC0
crw-rw----+ 1 root audio 116, 8 Dec 1 19:31 controlC1
crw-rw----+ 1 root audio 116, 12 Dec 1 19:31 hwC0D0
crw-rw----+ 1 root audio 116, 7 Dec 1 19:31 hwC1D2
crw-rw----+ 1 root audio 116, 11 Dec 1 19:31 pcmC0D3p
crw-rw----+ 1 root audio 116, 10 Dec 1 19:31 pcmC0D7p
crw-rw----+ 1 root audio 116, 9 Dec 1 19:31 pcmC0D8p
crw-rw----+ 1 root audio 116, 6 Dec 1 19:31 pcmC1D0c
crw-rw----+ 1 root audio 116, 5 Dec 1 19:31 pcmC1D0p
crw-rw----+ 1 root audio 116, 4 Dec 1 19:31 pcmC1D1c
crw-rw----+ 1 root audio 116, 3 Dec 1 19:31 pcmC1D1p
crw-rw----+ 1 root audio 116, 2 Dec 1 19:31 pcmC1D2c
crw-rw---- 1 root audio 116, 1 Dec 1 19:31 seq
crw-rw----+ 1 root audio 116, 33 Dec 1 19:31 timer
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: MID [HDA Intel MID], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: MID [HDA Intel MID], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
The above is all without any .asoundrc in my home directory or anything in /etc.modprobe.d/*.conf
From the wiki I've tried putting
options snd slots=snd_mia,snd_hda_intel
options snd_mia index=0
options snd_hda_intel index=1
in /etc/modprobe.d/alsa-base.conf, and tried reversing the 1 and 0, both 0's, both 1's to no avail.
I've tried a few variations in .asoundrc based on the wiki example with no luck.
I'm lost, this is the first time I've had sound issues with linux and I'm really not sure if it's rooted in the hardware, my first attempt at building a pc or a simple alsa config issue.
Googling for unable to open slave in alsa seems to bring up mainly conflicting programm issues whic I don't think is my issue as I have no sound at all.
*edit*
perhaps this should be in newbie corner? my linux sound knowledge is definitely newbie status.
Last edited by Proinsias (2013-12-03 23:22:48)

Solved, not sure where I was going wrong in my initial attempts but a simple .asoundrc has my speakers singing. Could have sworn this was tried to death in the first half hour or so, oh well.
On the plus side I spent my lunch hour today getting a rough idea of sound on linux and alsa preparing for a fight with my new build, ten minutes after booting up the new machine on my return home & all is well.
pcm.!default {
type hw
card 1
ctl.!default {
type hw
card 0

Solved: New iPod nano 8g not seen in My Computer/iTunes after Apple Support

I received this iPod as a Christmas gift and it has taken months to get it working but I am happy to say I finally did. I wanted to post what I did to solve the problem in case anyone else is having the same issue.
Background Information:
- Windows XP operating system (I had to upgrade to SP 2 just for this iPod)
- Computer works fine with an older iPod nano
- New iPod nano would simply bring up the "Install Hardware Wizard" and always resulted in "Cannot Install Hardware"
- Nothing would show up in My Computer
- iPod would say "Connected, Eject before disconnecting" when it was connected
- Under "Services" iPod service was running & Started
- Under "Device Manager" iPod showed up under "Other Devices" with an exclamation/question mark for "iPod" (note: this did not show up under USB controllers)
What I Have Tried That Didn't Work:
- Downloading new iTunes. I did this a few times and ended up with 7.6.1.9
- Uninstall and reinstall iTunes and Quicktime
- Tried Install Hardware Wizard option to search for drivers in c:\WINNT\inf (or c:\windows\inf if that's what you have)
- Restarted computer several times and tried creating a new user in Windows XP
- Tried going to "Right-click-My Computer"-"Manage"-"Device Manager" and uninstalled any instance of iPod (under "Other Devices") and tried refreshing / re-installing
- Tried stopping and restarting the iPod service in "Services"
- Tried restarting iPod, resetting it, all those 5 R's and other Apple support docs online
- Tried finding answers in forums
- Finally today I spent a few hours on the phone with Apple Support, and after repeating everything in their self-help documents online, and it still didn't work, they said "Call Microsoft and tell them you have a driver issue" and that my new iPod needed some additional driver (which is why old iPod works but not new)
So that's where I left off this afternoon. I think I've seen people who haven't had much luck getting Microsoft support to help with iPod issues, so I continued searching online. I tried updating my Video driver from the Gateway.com website and that didn't work.
On the microsoft.com website, the best I could find was a registry change which told me to delete registry keys for UpperFilters and LowerFilters, which I didn't even have so I couldn't try.
Finally, here is the solution to what worked:
I searched for iPod - specific drivers, and on some random help forum - http://www.computing.net/hardware/wwwboard/forum/43267.html
You'll see they mention "usbstor.inf" which needs to be in c:\winnt\inf (or c:\windows\inf). I checked my computer and it was missing. Luckily, it was there on my work laptop which was also recently upgraded to Windows XP so I e-mailed it to myself (glad I didn't have to trust some one online).
I also followed his directions to add "usbstor.sys" from c:\winnt\servicepack files\i386\ to c:\winnt\system32\drivers.
Lastly, I saw some other usb*.inf and usb*.pnf files on my laptop so I decided what-the-heck, I'll grab them all since I only had usbvideo.inf, and thus I extracted the following into my c:\winnt\inf directory: usb.inf, usb.pnf, usbport.inf, usbport.pnf, usbprint.pnf, usbprint.inf, usbstor.pnf, usbtor.inf.
I restarted my computer and right away my iPod magically appeared in MyComputer and when I opened iTunes, it was also successfully there. Funny thing is, Windows Install Hardware Wizard popped up and I pointed it to that directory -- guess what, it didn't work. Apparently that doesn't matter. Every time I plug in my iPod now, I will just skip the "Install New Hardware Wizard" and go straight to iTunes.
I know this was lengthy but I thought I could save some one else hours of checking around--- just go look in your "inf" directory and make sure you have the usbstor.inf file!
Good luck!!!!

Take a look at this link, http://support.apple.com/kb/TS1410

Question about udev,hal, hotplug and new Xorg 1.8

From what I understand the hal .fdi files now are ignored since the last upgrade of Xorg to version 1.8. Before that, I used to modify .fdi files and then restarting hal to get the modifications to work. I did this to configure my joystick and synaptics for example.
How I'm supposed to do that now with this new system? I've been trying with hal and the fdi files, but are totally ignored (as expected) and making changes to /etc/X11/xorg.conf.d/10-name-here.conf works but I have to restart X.
According to this the configuration for input devices should be done by .conf files on xorg.conf.d/ or udev rules.
The Xorg input hotplugging from the wiki is kind of outdated too because it's all about the deprecated hal so I don't understand how I'm supposed to configure and work with the hotplugging...
I hope someone can make this a little bit clear :) (or tell me that I'm really lost)

Not what I'm looking for really, because if I change the Xkblayout for example (or if I create a new file), the change only works after restarting X. My joystick for example, doesn't work and create a new inputclass only works after restarting it.
I know that I can change the keyboard layout some other way while using it using setxkbmap, but still, I'd like to know how it is supposed to use the "hot" plug.

[SOLVED]Intel Xorg Fail

Hi everyone,
I've found I can no longer start X (just a black screen, no cursor) on my Thinkpad X201 with Intel graphics. It was working fine earlier today (though I did update when this happened), and I've retraced anything I've changed as best I can, but with no luck.
I have no xorg.conf, but do have a 20-intel.conf in xorg.conf.d (I added this after the problem occurred), otherwise the machine starts looking for vesa drivers.
EDIT: Interestingly enough, root can start X fine, and I'm definitely in the video group. Creating another user and adding them to the video group, they are also able to start X.
SOLUTION: I'm a tool. To anyone else with this issue, comment out things in your .xinitrc until you find an offending entry. D'oh!
X.Org X Server 1.10.3
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.39-ARCH x86_64
Current Operating System: Linux x201 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
Kernel command line: root=/dev/disk/by-uuid/c6704f05-ee25-4661-843a-fab049152e86 ro
Build Date: 09 July 2011 07:52:32AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 00:53:22 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
And the obligatory Xorg.0.log
[ 1612.508]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 1612.508] X Protocol Version 11, Revision 0
[ 1612.508] Build Operating System: Linux 2.6.39-ARCH x86_64
[ 1612.508] Current Operating System: Linux x201 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
[ 1612.508] Kernel command line: root=/dev/disk/by-uuid/c6704f05-ee25-4661-843a-fab049152e86 ro
[ 1612.508] Build Date: 09 July 2011 07:52:32AM
[ 1612.508]
[ 1612.508] Current version of pixman: 0.22.2
[ 1612.508] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1612.508] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1612.509] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 00:53:22 2011
[ 1612.509] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1612.509] (==) No Layout section. Using the first Screen section.
[ 1612.509] (==) No screen section available. Using defaults.
[ 1612.509] (**) |-->Screen "Default Screen Section" (0)
[ 1612.509] (**) | |-->Monitor "<default monitor>"
[ 1612.509] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1612.509] (**) | |-->Device "old Intel"
[ 1612.509] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1612.509] (==) Automatically adding devices
[ 1612.509] (==) Automatically enabling devices
[ 1612.509] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1612.509] Entry deleted from font path.
[ 1612.509] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1612.509] Entry deleted from font path.
[ 1612.510] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1612.510] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1612.510] Entry deleted from font path.
[ 1612.510] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1612.510] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1612.510] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1612.510] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1612.510] (II) Loader magic: 0x7d3440
[ 1612.510] (II) Module ABI versions:
[ 1612.510] X.Org ANSI C Emulation: 0.4
[ 1612.510] X.Org Video Driver: 10.0
[ 1612.510] X.Org XInput driver : 12.2
[ 1612.510] X.Org Server Extension : 5.0
[ 1612.511] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 1612.511] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1612.511] (II) LoadModule: "extmod"
[ 1612.511] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 1612.511] (II) Module extmod: vendor="X.Org Foundation"
[ 1612.511] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] Module class: X.Org Server Extension
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.512] (II) Loading extension MIT-SCREEN-SAVER
[ 1612.512] (II) Loading extension XFree86-VidModeExtension
[ 1612.512] (II) Loading extension XFree86-DGA
[ 1612.512] (II) Loading extension DPMS
[ 1612.512] (II) Loading extension XVideo
[ 1612.512] (II) Loading extension XVideo-MotionCompensation
[ 1612.512] (II) Loading extension X-Resource
[ 1612.512] (II) LoadModule: "dbe"
[ 1612.512] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 1612.512] (II) Module dbe: vendor="X.Org Foundation"
[ 1612.512] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] Module class: X.Org Server Extension
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.512] (II) Loading extension DOUBLE-BUFFER
[ 1612.512] (II) LoadModule: "glx"
[ 1612.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1612.512] (II) Module glx: vendor="X.Org Foundation"
[ 1612.512] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (==) AIGLX enabled
[ 1612.513] (II) Loading extension GLX
[ 1612.513] (II) LoadModule: "record"
[ 1612.513] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 1612.513] (II) Module record: vendor="X.Org Foundation"
[ 1612.513] compiled for 1.10.3, module version = 1.13.0
[ 1612.513] Module class: X.Org Server Extension
[ 1612.513] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (II) Loading extension RECORD
[ 1612.513] (II) LoadModule: "dri"
[ 1612.513] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 1612.513] (II) Module dri: vendor="X.Org Foundation"
[ 1612.513] compiled for 1.10.3, module version = 1.0.0
[ 1612.513] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (II) Loading extension XFree86-DRI
[ 1612.513] (II) LoadModule: "dri2"
[ 1612.514] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1612.514] (II) Module dri2: vendor="X.Org Foundation"
[ 1612.514] compiled for 1.10.3, module version = 1.2.0
[ 1612.514] ABI class: X.Org Server Extension, version 5.0
[ 1612.514] (II) Loading extension DRI2
[ 1612.514] (II) LoadModule: "intel"
[ 1612.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1612.514] (II) Module intel: vendor="X.Org Foundation"
[ 1612.514] compiled for 1.10.2, module version = 2.15.0
[ 1612.514] Module class: X.Org Video Driver
[ 1612.514] ABI class: X.Org Video Driver, version 10.0
[ 1612.514] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 1612.515] (--) using VT number 7
[ 1612.522] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1612.522] drmOpenDevice: node name is /dev/dri/card0
[ 1612.522] drmOpenDevice: open result is 9, (OK)
[ 1612.522] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 1612.522] drmOpenDevice: node name is /dev/dri/card0
[ 1612.522] drmOpenDevice: open result is 9, (OK)
[ 1612.522] drmOpenByBusid: drmOpenMinor returns 9
[ 1612.522] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 1612.522] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1612.522] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1612.522] (==) intel(0): RGB weight 888
[ 1612.522] (==) intel(0): Default visual is TrueColor
[ 1612.522] (**) intel(0): Option "DRI" "false"
[ 1612.522] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 1612.522] (--) intel(0): Chipset: "Arrandale"
[ 1612.522] (**) intel(0): Relaxed fencing enabled
[ 1612.522] (**) intel(0): Framebuffer tiled
[ 1612.522] (**) intel(0): Pixmaps tiled
[ 1612.522] (**) intel(0): 3D buffers tiled
[ 1612.522] (**) intel(0): SwapBuffers wait enabled
[ 1612.522] (==) intel(0): video overlay key set to 0x101fe
[ 1612.523] (II) intel(0): Output LVDS1 has no monitor section
[ 1612.523] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 1612.523] (II) intel(0): Output VGA1 has no monitor section
[ 1612.546] (II) intel(0): Output HDMI1 has no monitor section
[ 1612.547] (II) intel(0): Output DP1 has no monitor section
[ 1612.547] (II) intel(0): EDID for output LVDS1
[ 1612.547] (II) intel(0): Manufacturer: LEN Model: 4011 Serial#: 0
[ 1612.547] (II) intel(0): Year: 2009 Week: 0
[ 1612.547] (II) intel(0): EDID Version: 1.3
[ 1612.547] (II) intel(0): Digital Display Input
[ 1612.547] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
[ 1612.547] (II) intel(0): Gamma: 2.20
[ 1612.547] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 1612.547] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1612.547] (II) intel(0): First detailed timing is preferred mode
[ 1612.547] (II) intel(0): redX: 0.592 redY: 0.351 greenX: 0.334 greenY: 0.549
[ 1612.547] (II) intel(0): blueX: 0.154 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 1612.547] (II) intel(0): Manufacturer's mask: 0
[ 1612.547] (II) intel(0): Supported detailed timing:
[ 1612.547] (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm
[ 1612.547] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
[ 1612.547] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0
[ 1612.547] (II) intel(0): Supported detailed timing:
[ 1612.547] (II) intel(0): clock: 57.8 MHz Image Size: 261 x 163 mm
[ 1612.547] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
[ 1612.547] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0
[ 1612.547] (II) intel(0): Unknown vendor-specific block f
[ 1612.547] (II) intel(0): LP121WX3-TLC1
[ 1612.547] (II) intel(0): EDID (in hex):
[ 1612.547] (II) intel(0): 00ffffffffffff0030ae114000000000
[ 1612.547] (II) intel(0): 00130103801a1078eaba959759558c27
[ 1612.547] (II) intel(0): 21505400000001010101010101010101
[ 1612.547] (II) intel(0): 010101010101121b0080502014301820
[ 1612.547] (II) intel(0): 440005a31000001f9316008050201430
[ 1612.547] (II) intel(0): 1820440005a31000001f0000000f0081
[ 1612.547] (II) intel(0): 0a3c810a3216090030e4f001000000fe
[ 1612.547] (II) intel(0): 004c503132315758332d544c433100ac
[ 1612.547] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 1612.547] (II) intel(0): Printing DDC gathered Modelines:
[ 1612.547] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (49.2 kHz)
[ 1612.547] (II) intel(0): Modeline "1280x800"x0.0 57.79 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (41.0 kHz)
[ 1612.548] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Printing probed modes for output LVDS1
[ 1612.548] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (49.2 kHz)
[ 1612.548] (II) intel(0): Modeline "1280x800"x50.1 57.79 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (41.0 kHz)
[ 1612.548] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 1612.548] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 1612.548] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 1612.548] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 1612.548] (II) intel(0): EDID for output VGA1
[ 1612.571] (II) intel(0): EDID for output HDMI1
[ 1612.572] (II) intel(0): EDID for output DP1
[ 1612.572] (II) intel(0): Output LVDS1 connected
[ 1612.572] (II) intel(0): Output VGA1 disconnected
[ 1612.572] (II) intel(0): Output HDMI1 disconnected
[ 1612.572] (II) intel(0): Output DP1 disconnected
[ 1612.572] (II) intel(0): Using exact sizes for initial modes
[ 1612.572] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 1612.572] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1612.572] (II) intel(0): Kernel page flipping support detected, enabling
[ 1612.572] (**) intel(0): Display dimensions: (260, 160) mm
[ 1612.572] (**) intel(0): DPI set to (125, 127)
[ 1612.572] (II) Loading sub module "fb"
[ 1612.572] (II) LoadModule: "fb"
[ 1612.572] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1612.572] (II) Module fb: vendor="X.Org Foundation"
[ 1612.572] compiled for 1.10.3, module version = 1.0.0
[ 1612.572] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1612.572] (==) Depth 24 pixmap format is 32 bpp
[ 1612.572] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 1612.578] (II) UXA(0): Driver registered support for the following operations:
[ 1612.578] (II) solid
[ 1612.578] (II) copy
[ 1612.578] (II) composite (RENDER acceleration)
[ 1612.578] (II) put_image
[ 1612.578] (II) get_image
[ 1612.578] (==) intel(0): Backing store disabled
[ 1612.578] (==) intel(0): Silken mouse enabled
[ 1612.578] (II) intel(0): Initializing HW Cursor
[ 1612.640] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1612.642] (==) intel(0): DPMS enabled
[ 1612.642] (==) intel(0): Intel XvMC decoder enabled
[ 1612.642] (II) intel(0): Set up textured video
[ 1612.642] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1612.642] (II) intel(0): direct rendering: Disabled
[ 1612.642] (==) intel(0): hotplug detection: "enabled"
[ 1612.642] (--) RandR disabled
[ 1612.642] (II) Initializing built-in extension Generic Event Extension
[ 1612.642] (II) Initializing built-in extension SHAPE
[ 1612.642] (II) Initializing built-in extension MIT-SHM
[ 1612.642] (II) Initializing built-in extension XInputExtension
[ 1612.642] (II) Initializing built-in extension XTEST
[ 1612.642] (II) Initializing built-in extension BIG-REQUESTS
[ 1612.642] (II) Initializing built-in extension SYNC
[ 1612.642] (II) Initializing built-in extension XKEYBOARD
[ 1612.642] (II) Initializing built-in extension XC-MISC
[ 1612.642] (II) Initializing built-in extension SECURITY
[ 1612.642] (II) Initializing built-in extension XINERAMA
[ 1612.642] (II) Initializing built-in extension XFIXES
[ 1612.642] (II) Initializing built-in extension RENDER
[ 1612.642] (II) Initializing built-in extension RANDR
[ 1612.642] (II) Initializing built-in extension COMPOSITE
[ 1612.642] (II) Initializing built-in extension DAMAGE
[ 1612.649] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1612.649] (II) AIGLX: Screen 0 is not DRI capable
[ 1612.651] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[ 1612.651] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1612.651] (II) intel(0): Setting screen physical size to 338 x 211
[ 1612.704] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1612.704] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1612.704] (II) LoadModule: "evdev"
[ 1612.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.704] (II) Module evdev: vendor="X.Org Foundation"
[ 1612.704] compiled for 1.10.0, module version = 2.6.0
[ 1612.704] Module class: X.Org XInput Driver
[ 1612.704] ABI class: X.Org XInput driver, version 12.2
[ 1612.704] (II) Using input driver 'evdev' for 'Power Button'
[ 1612.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.704] (**) Power Button: always reports core events
[ 1612.704] (**) Power Button: Device: "/dev/input/event3"
[ 1612.756] (--) Power Button: Found keys
[ 1612.756] (II) Power Button: Configuring as keyboard
[ 1612.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 1612.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1612.756] (**) Option "xkb_rules" "evdev"
[ 1612.756] (**) Option "xkb_model" "evdev"
[ 1612.756] (**) Option "xkb_layout" "us"
[ 1612.796] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 1612.796] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1612.796] (II) Using input driver 'evdev' for 'Video Bus'
[ 1612.796] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.796] (**) Video Bus: always reports core events
[ 1612.796] (**) Video Bus: Device: "/dev/input/event6"
[ 1612.833] (--) Video Bus: Found keys
[ 1612.833] (II) Video Bus: Configuring as keyboard
[ 1612.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[ 1612.833] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 1612.833] (**) Option "xkb_rules" "evdev"
[ 1612.833] (**) Option "xkb_model" "evdev"
[ 1612.833] (**) Option "xkb_layout" "us"
[ 1612.841] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1612.841] (II) No input driver/identifier specified (ignoring)
[ 1612.842] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 1612.842] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1612.842] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1612.842] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.842] (**) Sleep Button: always reports core events
[ 1612.842] (**) Sleep Button: Device: "/dev/input/event2"
[ 1612.856] (--) Sleep Button: Found keys
[ 1612.856] (II) Sleep Button: Configuring as keyboard
[ 1612.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 1612.856] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 1612.856] (**) Option "xkb_rules" "evdev"
[ 1612.856] (**) Option "xkb_model" "evdev"
[ 1612.856] (**) Option "xkb_layout" "us"
[ 1612.861] (II) config/udev: Adding input device Integrated Camera (/dev/input/event9)
[ 1612.861] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 1612.861] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 1612.861] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.861] (**) Integrated Camera: always reports core events
[ 1612.861] (**) Integrated Camera: Device: "/dev/input/event9"
[ 1612.879] (--) Integrated Camera: Found keys
[ 1612.880] (II) Integrated Camera: Configuring as keyboard
[ 1612.880] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9/event9"
[ 1612.880] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 1612.880] (**) Option "xkb_rules" "evdev"
[ 1612.880] (**) Option "xkb_model" "evdev"
[ 1612.880] (**) Option "xkb_layout" "us"
[ 1612.880] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 1612.880] (II) No input driver/identifier specified (ignoring)
[ 1612.887] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1612.887] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1612.887] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1612.887] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.887] (**) AT Translated Set 2 keyboard: always reports core events
[ 1612.887] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1612.906] (--) AT Translated Set 2 keyboard: Found keys
[ 1612.906] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1612.906] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1612.906] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 1612.906] (**) Option "xkb_rules" "evdev"
[ 1612.906] (**) Option "xkb_model" "evdev"
[ 1612.906] (**) Option "xkb_layout" "us"
[ 1612.907] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1612.907] (II) LoadModule: "synaptics"
[ 1612.907] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1612.907] (II) Module synaptics: vendor="X.Org Foundation"
[ 1612.907] compiled for 1.10.2, module version = 1.4.1
[ 1612.907] Module class: X.Org XInput Driver
[ 1612.907] ABI class: X.Org XInput driver, version 12.2
[ 1612.907] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1612.907] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1612.907] (**) Option "Device" "/dev/input/event8"
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4810
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1613.040] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 1613.040] (**) Option "TapButton1" "1"
[ 1613.040] (**) Option "TapButton2" "2"
[ 1613.040] (**) Option "TapButton3" "3"
[ 1613.146] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1613.146] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1613.199] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 1613.199] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1613.279] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1613.280] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1613.280] (II) No input driver/identifier specified (ignoring)
[ 1613.280] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 1613.280] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 1613.280] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1613.280] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 1613.306] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 1613.306] (**) Option "Emulate3Buttons" "false"
[ 1613.306] (**) Option "EmulateWheel" "true"
[ 1613.306] (**) Option "EmulateWheelButton" "2"
[ 1613.306] (**) Option "YAxisMapping" "4 5"
[ 1613.306] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 1613.306] (**) Option "XAxisMapping" "6 7"
[ 1613.306] (**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 1613.306] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1613.306] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input10/event10"
[ 1613.306] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 1613.306] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 1613.307] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 1613.307] (II) No input driver/identifier specified (ignoring)
[ 1613.307] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 1613.307] (II) No input driver/identifier specified (ignoring)
[ 1613.308] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 1613.308] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 1613.308] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 1613.308] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1613.308] (**) ThinkPad Extra Buttons: always reports core events
[ 1613.308] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 1613.333] (--) ThinkPad Extra Buttons: Found keys
[ 1613.333] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 1613.333] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 1613.333] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 1613.333] (**) Option "xkb_rules" "evdev"
[ 1613.333] (**) Option "xkb_model" "evdev"
[ 1613.333] (**) Option "xkb_layout" "us"
[ 1613.335] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/event11)
[ 1613.335] (II) No input driver/identifier specified (ignoring)
[ 1613.335] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/js0)
[ 1613.335] (II) No input driver/identifier specified (ignoring)
[ 1613.336] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/event12)
[ 1613.336] (**) ThinkPad HDAPS accelerometer data: Ignoring device from InputClass "ThinkPad HDAPS accelerometer blacklist"
[ 1613.336] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/js1)
[ 1613.336] (**) ThinkPad HDAPS accelerometer data: Ignoring device from InputClass "ThinkPad HDAPS accelerometer blacklist"
I'm completely stumped. Does anyone have any ideas?
Thanks in advance,
Mike
Last edited by MikeEcho (2011-07-20 00:39:25)

Hi everyone,
I've found I can no longer start X (just a black screen, no cursor) on my Thinkpad X201 with Intel graphics. It was working fine earlier today (though I did update when this happened), and I've retraced anything I've changed as best I can, but with no luck.
I have no xorg.conf, but do have a 20-intel.conf in xorg.conf.d (I added this after the problem occurred), otherwise the machine starts looking for vesa drivers.
EDIT: Interestingly enough, root can start X fine, and I'm definitely in the video group. Creating another user and adding them to the video group, they are also able to start X.
SOLUTION: I'm a tool. To anyone else with this issue, comment out things in your .xinitrc until you find an offending entry. D'oh!
X.Org X Server 1.10.3
Release Date: 2011-07-08
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.39-ARCH x86_64
Current Operating System: Linux x201 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
Kernel command line: root=/dev/disk/by-uuid/c6704f05-ee25-4661-843a-fab049152e86 ro
Build Date: 09 July 2011 07:52:32AM
Current version of pixman: 0.22.2
Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
(==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 00:53:22 2011
(==) Using config directory: "/etc/X11/xorg.conf.d"
And the obligatory Xorg.0.log
[ 1612.508]
X.Org X Server 1.10.3
Release Date: 2011-07-08
[ 1612.508] X Protocol Version 11, Revision 0
[ 1612.508] Build Operating System: Linux 2.6.39-ARCH x86_64
[ 1612.508] Current Operating System: Linux x201 2.6.39-ARCH #1 SMP PREEMPT Sat Jul 9 14:57:41 CEST 2011 x86_64
[ 1612.508] Kernel command line: root=/dev/disk/by-uuid/c6704f05-ee25-4661-843a-fab049152e86 ro
[ 1612.508] Build Date: 09 July 2011 07:52:32AM
[ 1612.508]
[ 1612.508] Current version of pixman: 0.22.2
[ 1612.508] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 1612.508] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 1612.509] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jul 20 00:53:22 2011
[ 1612.509] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 1612.509] (==) No Layout section. Using the first Screen section.
[ 1612.509] (==) No screen section available. Using defaults.
[ 1612.509] (**) |-->Screen "Default Screen Section" (0)
[ 1612.509] (**) | |-->Monitor "<default monitor>"
[ 1612.509] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 1612.509] (**) | |-->Device "old Intel"
[ 1612.509] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 1612.509] (==) Automatically adding devices
[ 1612.509] (==) Automatically enabling devices
[ 1612.509] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 1612.509] Entry deleted from font path.
[ 1612.509] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 1612.509] Entry deleted from font path.
[ 1612.510] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 1612.510] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 1612.510] Entry deleted from font path.
[ 1612.510] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 1612.510] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 1612.510] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 1612.510] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 1612.510] (II) Loader magic: 0x7d3440
[ 1612.510] (II) Module ABI versions:
[ 1612.510] X.Org ANSI C Emulation: 0.4
[ 1612.510] X.Org Video Driver: 10.0
[ 1612.510] X.Org XInput driver : 12.2
[ 1612.510] X.Org Server Extension : 5.0
[ 1612.511] (--) PCI:*(0:0:2:0) 8086:0046:17aa:215a rev 2, Mem @ 0xf2000000/4194304, 0xd0000000/268435456, I/O @ 0x00001800/8
[ 1612.511] (II) Open ACPI successful (/var/run/acpid.socket)
[ 1612.511] (II) LoadModule: "extmod"
[ 1612.511] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 1612.511] (II) Module extmod: vendor="X.Org Foundation"
[ 1612.511] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] Module class: X.Org Server Extension
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.512] (II) Loading extension MIT-SCREEN-SAVER
[ 1612.512] (II) Loading extension XFree86-VidModeExtension
[ 1612.512] (II) Loading extension XFree86-DGA
[ 1612.512] (II) Loading extension DPMS
[ 1612.512] (II) Loading extension XVideo
[ 1612.512] (II) Loading extension XVideo-MotionCompensation
[ 1612.512] (II) Loading extension X-Resource
[ 1612.512] (II) LoadModule: "dbe"
[ 1612.512] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 1612.512] (II) Module dbe: vendor="X.Org Foundation"
[ 1612.512] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] Module class: X.Org Server Extension
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.512] (II) Loading extension DOUBLE-BUFFER
[ 1612.512] (II) LoadModule: "glx"
[ 1612.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 1612.512] (II) Module glx: vendor="X.Org Foundation"
[ 1612.512] compiled for 1.10.3, module version = 1.0.0
[ 1612.512] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (==) AIGLX enabled
[ 1612.513] (II) Loading extension GLX
[ 1612.513] (II) LoadModule: "record"
[ 1612.513] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 1612.513] (II) Module record: vendor="X.Org Foundation"
[ 1612.513] compiled for 1.10.3, module version = 1.13.0
[ 1612.513] Module class: X.Org Server Extension
[ 1612.513] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (II) Loading extension RECORD
[ 1612.513] (II) LoadModule: "dri"
[ 1612.513] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 1612.513] (II) Module dri: vendor="X.Org Foundation"
[ 1612.513] compiled for 1.10.3, module version = 1.0.0
[ 1612.513] ABI class: X.Org Server Extension, version 5.0
[ 1612.513] (II) Loading extension XFree86-DRI
[ 1612.513] (II) LoadModule: "dri2"
[ 1612.514] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 1612.514] (II) Module dri2: vendor="X.Org Foundation"
[ 1612.514] compiled for 1.10.3, module version = 1.2.0
[ 1612.514] ABI class: X.Org Server Extension, version 5.0
[ 1612.514] (II) Loading extension DRI2
[ 1612.514] (II) LoadModule: "intel"
[ 1612.514] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1612.514] (II) Module intel: vendor="X.Org Foundation"
[ 1612.514] compiled for 1.10.2, module version = 2.15.0
[ 1612.514] Module class: X.Org Video Driver
[ 1612.514] ABI class: X.Org Video Driver, version 10.0
[ 1612.514] (II) intel: Driver for Intel Integrated Graphics Chipsets: i810,
i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G, 915G,
E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM, Pineview G,
965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33, GM45,
4 Series, G45/G43, Q45/Q43, G41, B43, B43, Clarkdale, Arrandale,
Sandybridge Desktop (GT1), Sandybridge Desktop (GT2),
Sandybridge Desktop (GT2+), Sandybridge Mobile (GT1),
Sandybridge Mobile (GT2), Sandybridge Mobile (GT2+),
Sandybridge Server, Ivybridge Mobile (GT1), Ivybridge Mobile (GT2),
Ivybridge Desktop (GT1), Ivybridge Desktop (GT2), Ivybridge Server
[ 1612.515] (--) using VT number 7
[ 1612.522] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 1612.522] drmOpenDevice: node name is /dev/dri/card0
[ 1612.522] drmOpenDevice: open result is 9, (OK)
[ 1612.522] drmOpenByBusid: Searching for BusID pci:0000:00:02.0
[ 1612.522] drmOpenDevice: node name is /dev/dri/card0
[ 1612.522] drmOpenDevice: open result is 9, (OK)
[ 1612.522] drmOpenByBusid: drmOpenMinor returns 9
[ 1612.522] drmOpenByBusid: drmGetBusid reports pci:0000:00:02.0
[ 1612.522] (II) intel(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 1612.522] (==) intel(0): Depth 24, (--) framebuffer bpp 32
[ 1612.522] (==) intel(0): RGB weight 888
[ 1612.522] (==) intel(0): Default visual is TrueColor
[ 1612.522] (**) intel(0): Option "DRI" "false"
[ 1612.522] (II) intel(0): Integrated Graphics Chipset: Intel(R) Arrandale
[ 1612.522] (--) intel(0): Chipset: "Arrandale"
[ 1612.522] (**) intel(0): Relaxed fencing enabled
[ 1612.522] (**) intel(0): Framebuffer tiled
[ 1612.522] (**) intel(0): Pixmaps tiled
[ 1612.522] (**) intel(0): 3D buffers tiled
[ 1612.522] (**) intel(0): SwapBuffers wait enabled
[ 1612.522] (==) intel(0): video overlay key set to 0x101fe
[ 1612.523] (II) intel(0): Output LVDS1 has no monitor section
[ 1612.523] (II) intel(0): found backlight control interface /sys/class/backlight/acpi_video0
[ 1612.523] (II) intel(0): Output VGA1 has no monitor section
[ 1612.546] (II) intel(0): Output HDMI1 has no monitor section
[ 1612.547] (II) intel(0): Output DP1 has no monitor section
[ 1612.547] (II) intel(0): EDID for output LVDS1
[ 1612.547] (II) intel(0): Manufacturer: LEN Model: 4011 Serial#: 0
[ 1612.547] (II) intel(0): Year: 2009 Week: 0
[ 1612.547] (II) intel(0): EDID Version: 1.3
[ 1612.547] (II) intel(0): Digital Display Input
[ 1612.547] (II) intel(0): Max Image Size [cm]: horiz.: 26 vert.: 16
[ 1612.547] (II) intel(0): Gamma: 2.20
[ 1612.547] (II) intel(0): DPMS capabilities: StandBy Suspend Off
[ 1612.547] (II) intel(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 1612.547] (II) intel(0): First detailed timing is preferred mode
[ 1612.547] (II) intel(0): redX: 0.592 redY: 0.351 greenX: 0.334 greenY: 0.549
[ 1612.547] (II) intel(0): blueX: 0.154 blueY: 0.130 whiteX: 0.313 whiteY: 0.329
[ 1612.547] (II) intel(0): Manufacturer's mask: 0
[ 1612.547] (II) intel(0): Supported detailed timing:
[ 1612.547] (II) intel(0): clock: 69.3 MHz Image Size: 261 x 163 mm
[ 1612.547] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
[ 1612.547] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0
[ 1612.547] (II) intel(0): Supported detailed timing:
[ 1612.547] (II) intel(0): clock: 57.8 MHz Image Size: 261 x 163 mm
[ 1612.547] (II) intel(0): h_active: 1280 h_sync: 1304 h_sync_end 1336 h_blank_end 1408 h_border: 0
[ 1612.547] (II) intel(0): v_active: 800 v_sync: 804 v_sync_end 808 v_blanking: 820 v_border: 0
[ 1612.547] (II) intel(0): Unknown vendor-specific block f
[ 1612.547] (II) intel(0): LP121WX3-TLC1
[ 1612.547] (II) intel(0): EDID (in hex):
[ 1612.547] (II) intel(0): 00ffffffffffff0030ae114000000000
[ 1612.547] (II) intel(0): 00130103801a1078eaba959759558c27
[ 1612.547] (II) intel(0): 21505400000001010101010101010101
[ 1612.547] (II) intel(0): 010101010101121b0080502014301820
[ 1612.547] (II) intel(0): 440005a31000001f9316008050201430
[ 1612.547] (II) intel(0): 1820440005a31000001f0000000f0081
[ 1612.547] (II) intel(0): 0a3c810a3216090030e4f001000000fe
[ 1612.547] (II) intel(0): 004c503132315758332d544c433100ac
[ 1612.547] (II) intel(0): EDID vendor "LEN", prod id 16401
[ 1612.547] (II) intel(0): Printing DDC gathered Modelines:
[ 1612.547] (II) intel(0): Modeline "1280x800"x0.0 69.30 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (49.2 kHz)
[ 1612.547] (II) intel(0): Modeline "1280x800"x0.0 57.79 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (41.0 kHz)
[ 1612.548] (II) intel(0): Not using default mode "320x240" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "400x300" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "512x384" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "640x480" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "640x512" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "800x600" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "896x672" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "928x696" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "960x720" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "700x525" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Not using default mode "1024x768" (doublescan mode not supported)
[ 1612.548] (II) intel(0): Printing probed modes for output LVDS1
[ 1612.548] (II) intel(0): Modeline "1280x800"x60.0 69.30 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (49.2 kHz)
[ 1612.548] (II) intel(0): Modeline "1280x800"x50.1 57.79 1280 1304 1336 1408 800 804 808 820 +hsync +vsync (41.0 kHz)
[ 1612.548] (II) intel(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 1612.548] (II) intel(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 1612.548] (II) intel(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz)
[ 1612.548] (II) intel(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 1612.548] (II) intel(0): EDID for output VGA1
[ 1612.571] (II) intel(0): EDID for output HDMI1
[ 1612.572] (II) intel(0): EDID for output DP1
[ 1612.572] (II) intel(0): Output LVDS1 connected
[ 1612.572] (II) intel(0): Output VGA1 disconnected
[ 1612.572] (II) intel(0): Output HDMI1 disconnected
[ 1612.572] (II) intel(0): Output DP1 disconnected
[ 1612.572] (II) intel(0): Using exact sizes for initial modes
[ 1612.572] (II) intel(0): Output LVDS1 using initial mode 1280x800
[ 1612.572] (II) intel(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 1612.572] (II) intel(0): Kernel page flipping support detected, enabling
[ 1612.572] (**) intel(0): Display dimensions: (260, 160) mm
[ 1612.572] (**) intel(0): DPI set to (125, 127)
[ 1612.572] (II) Loading sub module "fb"
[ 1612.572] (II) LoadModule: "fb"
[ 1612.572] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 1612.572] (II) Module fb: vendor="X.Org Foundation"
[ 1612.572] compiled for 1.10.3, module version = 1.0.0
[ 1612.572] ABI class: X.Org ANSI C Emulation, version 0.4
[ 1612.572] (==) Depth 24 pixmap format is 32 bpp
[ 1612.572] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled
[ 1612.578] (II) UXA(0): Driver registered support for the following operations:
[ 1612.578] (II) solid
[ 1612.578] (II) copy
[ 1612.578] (II) composite (RENDER acceleration)
[ 1612.578] (II) put_image
[ 1612.578] (II) get_image
[ 1612.578] (==) intel(0): Backing store disabled
[ 1612.578] (==) intel(0): Silken mouse enabled
[ 1612.578] (II) intel(0): Initializing HW Cursor
[ 1612.640] (II) intel(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 1612.642] (==) intel(0): DPMS enabled
[ 1612.642] (==) intel(0): Intel XvMC decoder enabled
[ 1612.642] (II) intel(0): Set up textured video
[ 1612.642] (II) intel(0): [XvMC] xvmc_vld driver initialized.
[ 1612.642] (II) intel(0): direct rendering: Disabled
[ 1612.642] (==) intel(0): hotplug detection: "enabled"
[ 1612.642] (--) RandR disabled
[ 1612.642] (II) Initializing built-in extension Generic Event Extension
[ 1612.642] (II) Initializing built-in extension SHAPE
[ 1612.642] (II) Initializing built-in extension MIT-SHM
[ 1612.642] (II) Initializing built-in extension XInputExtension
[ 1612.642] (II) Initializing built-in extension XTEST
[ 1612.642] (II) Initializing built-in extension BIG-REQUESTS
[ 1612.642] (II) Initializing built-in extension SYNC
[ 1612.642] (II) Initializing built-in extension XKEYBOARD
[ 1612.642] (II) Initializing built-in extension XC-MISC
[ 1612.642] (II) Initializing built-in extension SECURITY
[ 1612.642] (II) Initializing built-in extension XINERAMA
[ 1612.642] (II) Initializing built-in extension XFIXES
[ 1612.642] (II) Initializing built-in extension RENDER
[ 1612.642] (II) Initializing built-in extension RANDR
[ 1612.642] (II) Initializing built-in extension COMPOSITE
[ 1612.642] (II) Initializing built-in extension DAMAGE
[ 1612.649] (II) AIGLX: Screen 0 is not DRI2 capable
[ 1612.649] (II) AIGLX: Screen 0 is not DRI capable
[ 1612.651] (II) AIGLX: Loaded and initialized /usr/lib/xorg/modules/dri/swrast_dri.so
[ 1612.651] (II) GLX: Initialized DRISWRAST GL provider for screen 0
[ 1612.651] (II) intel(0): Setting screen physical size to 338 x 211
[ 1612.704] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 1612.704] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 1612.704] (II) LoadModule: "evdev"
[ 1612.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.704] (II) Module evdev: vendor="X.Org Foundation"
[ 1612.704] compiled for 1.10.0, module version = 2.6.0
[ 1612.704] Module class: X.Org XInput Driver
[ 1612.704] ABI class: X.Org XInput driver, version 12.2
[ 1612.704] (II) Using input driver 'evdev' for 'Power Button'
[ 1612.704] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.704] (**) Power Button: always reports core events
[ 1612.704] (**) Power Button: Device: "/dev/input/event3"
[ 1612.756] (--) Power Button: Found keys
[ 1612.756] (II) Power Button: Configuring as keyboard
[ 1612.756] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input3/event3"
[ 1612.756] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 1612.756] (**) Option "xkb_rules" "evdev"
[ 1612.756] (**) Option "xkb_model" "evdev"
[ 1612.756] (**) Option "xkb_layout" "us"
[ 1612.796] (II) config/udev: Adding input device Video Bus (/dev/input/event6)
[ 1612.796] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 1612.796] (II) Using input driver 'evdev' for 'Video Bus'
[ 1612.796] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.796] (**) Video Bus: always reports core events
[ 1612.796] (**) Video Bus: Device: "/dev/input/event6"
[ 1612.833] (--) Video Bus: Found keys
[ 1612.833] (II) Video Bus: Configuring as keyboard
[ 1612.833] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input6/event6"
[ 1612.833] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 1612.833] (**) Option "xkb_rules" "evdev"
[ 1612.833] (**) Option "xkb_model" "evdev"
[ 1612.833] (**) Option "xkb_layout" "us"
[ 1612.841] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 1612.841] (II) No input driver/identifier specified (ignoring)
[ 1612.842] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
[ 1612.842] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 1612.842] (II) Using input driver 'evdev' for 'Sleep Button'
[ 1612.842] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.842] (**) Sleep Button: always reports core events
[ 1612.842] (**) Sleep Button: Device: "/dev/input/event2"
[ 1612.856] (--) Sleep Button: Found keys
[ 1612.856] (II) Sleep Button: Configuring as keyboard
[ 1612.856] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input2/event2"
[ 1612.856] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
[ 1612.856] (**) Option "xkb_rules" "evdev"
[ 1612.856] (**) Option "xkb_model" "evdev"
[ 1612.856] (**) Option "xkb_layout" "us"
[ 1612.861] (II) config/udev: Adding input device Integrated Camera (/dev/input/event9)
[ 1612.861] (**) Integrated Camera: Applying InputClass "evdev keyboard catchall"
[ 1612.861] (II) Using input driver 'evdev' for 'Integrated Camera'
[ 1612.861] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.861] (**) Integrated Camera: always reports core events
[ 1612.861] (**) Integrated Camera: Device: "/dev/input/event9"
[ 1612.879] (--) Integrated Camera: Found keys
[ 1612.880] (II) Integrated Camera: Configuring as keyboard
[ 1612.880] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.0/input/input9/event9"
[ 1612.880] (II) XINPUT: Adding extended input device "Integrated Camera" (type: KEYBOARD)
[ 1612.880] (**) Option "xkb_rules" "evdev"
[ 1612.880] (**) Option "xkb_model" "evdev"
[ 1612.880] (**) Option "xkb_layout" "us"
[ 1612.880] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event7)
[ 1612.880] (II) No input driver/identifier specified (ignoring)
[ 1612.887] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 1612.887] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 1612.887] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 1612.887] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1612.887] (**) AT Translated Set 2 keyboard: always reports core events
[ 1612.887] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 1612.906] (--) AT Translated Set 2 keyboard: Found keys
[ 1612.906] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 1612.906] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 1612.906] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 1612.906] (**) Option "xkb_rules" "evdev"
[ 1612.906] (**) Option "xkb_model" "evdev"
[ 1612.906] (**) Option "xkb_layout" "us"
[ 1612.907] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event8)
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 1612.907] (II) LoadModule: "synaptics"
[ 1612.907] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1612.907] (II) Module synaptics: vendor="X.Org Foundation"
[ 1612.907] compiled for 1.10.2, module version = 1.4.1
[ 1612.907] Module class: X.Org XInput Driver
[ 1612.907] ABI class: X.Org XInput driver, version 12.2
[ 1612.907] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 1612.907] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 1612.907] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1612.907] (**) Option "Device" "/dev/input/event8"
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5888
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4810
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 1613.039] (--) SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 1613.040] (--) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 1613.040] (**) Option "TapButton1" "1"
[ 1613.040] (**) Option "TapButton2" "2"
[ 1613.040] (**) Option "TapButton3" "3"
[ 1613.146] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1613.146] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 1613.199] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input8/event8"
[ 1613.199] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: AccelFactor is now 0.036
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 1613.200] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 1613.279] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 1613.280] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 1613.280] (II) No input driver/identifier specified (ignoring)
[ 1613.280] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/event10)
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Applying InputClass "evdev pointer catchall"
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Applying InputClass "Trackpoint Wheel Emulation"
[ 1613.280] (II) Using input driver 'evdev' for 'TPPS/2 IBM TrackPoint'
[ 1613.280] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1613.280] (**) TPPS/2 IBM TrackPoint: always reports core events
[ 1613.280] (**) TPPS/2 IBM TrackPoint: Device: "/dev/input/event10"
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found 3 mouse buttons
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found relative axes
[ 1613.306] (--) TPPS/2 IBM TrackPoint: Found x and y relative axes
[ 1613.306] (II) TPPS/2 IBM TrackPoint: Configuring as mouse
[ 1613.306] (**) Option "Emulate3Buttons" "false"
[ 1613.306] (**) Option "EmulateWheel" "true"
[ 1613.306] (**) Option "EmulateWheelButton" "2"
[ 1613.306] (**) Option "YAxisMapping" "4 5"
[ 1613.306] (**) TPPS/2 IBM TrackPoint: YAxisMapping: buttons 4 and 5
[ 1613.306] (**) Option "XAxisMapping" "6 7"
[ 1613.306] (**) TPPS/2 IBM TrackPoint: XAxisMapping: buttons 6 and 7
[ 1613.306] (**) TPPS/2 IBM TrackPoint: EmulateWheelButton: 2, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 1613.306] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/serio2/input/input10/event10"
[ 1613.306] (II) XINPUT: Adding extended input device "TPPS/2 IBM TrackPoint" (type: MOUSE)
[ 1613.306] (II) TPPS/2 IBM TrackPoint: initialized for relative axes.
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) keeping acceleration scheme 1
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration profile 0
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration factor: 2.000
[ 1613.307] (**) TPPS/2 IBM TrackPoint: (accel) acceleration threshold: 4
[ 1613.307] (II) config/udev: Adding input device TPPS/2 IBM TrackPoint (/dev/input/mouse1)
[ 1613.307] (II) No input driver/identifier specified (ignoring)
[ 1613.307] (II) config/udev: Adding input device PC Speaker (/dev/input/event4)
[ 1613.307] (II) No input driver/identifier specified (ignoring)
[ 1613.308] (II) config/udev: Adding input device ThinkPad Extra Buttons (/dev/input/event5)
[ 1613.308] (**) ThinkPad Extra Buttons: Applying InputClass "evdev keyboard catchall"
[ 1613.308] (II) Using input driver 'evdev' for 'ThinkPad Extra Buttons'
[ 1613.308] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 1613.308] (**) ThinkPad Extra Buttons: always reports core events
[ 1613.308] (**) ThinkPad Extra Buttons: Device: "/dev/input/event5"
[ 1613.333] (--) ThinkPad Extra Buttons: Found keys
[ 1613.333] (II) ThinkPad Extra Buttons: Configuring as keyboard
[ 1613.333] (**) Option "config_info" "udev:/sys/devices/platform/thinkpad_acpi/input/input5/event5"
[ 1613.333] (II) XINPUT: Adding extended input device "ThinkPad Extra Buttons" (type: KEYBOARD)
[ 1613.333] (**) Option "xkb_rules" "evdev"
[ 1613.333] (**) Option "xkb_model" "evdev"
[ 1613.333] (**) Option "xkb_layout" "us"
[ 1613.335] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/event11)
[ 1613.335] (II) No input driver/identifier specified (ignoring)
[ 1613.335] (II) config/udev: Adding input device ThinkPad HDAPS joystick emulation (/dev/input/js0)
[ 1613.335] (II) No input driver/identifier specified (ignoring)
[ 1613.336] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/event12)
[ 1613.336] (**) ThinkPad HDAPS accelerometer data: Ignoring device from InputClass "ThinkPad HDAPS accelerometer blacklist"
[ 1613.336] (II) config/udev: Adding input device ThinkPad HDAPS accelerometer data (/dev/input/js1)
[ 1613.336] (**) ThinkPad HDAPS accelerometer data: Ignoring device from InputClass "ThinkPad HDAPS accelerometer blacklist"
I'm completely stumped. Does anyone have any ideas?
Thanks in advance,
Mike
Last edited by MikeEcho (2011-07-20 00:39:25)

[SOLVED] New XORG 1.10.*

Similar Messages

Maybe you are looking for