[Solved] No longer able to boot Kernel

Haven't been able to post this since I've been without internet for a time. Since the update requiring manual intervention on /etc/mtab (20th Dec, in the news feed) I have been unable to boot the kernel. Exact output is due to come (will have to try and boot it again then copy it down to get it) but the gist of it is that it can't find the modules, and so is not able to mount any partitions, dropping to an emergency shell.
I've tried using a livecd to access it, and can mount the partitions, but proc will not mount once chrooted into the environment, and without it mkinitcpio seems unable to detect any filesystems.
I suspect it's time for a reinstall because of this, but hope there's a fix that will save me the time and hassle of doing so.
Last edited by Gremnon (2012-01-14 21:31:10)

You have to mount /dev and /proc before chrooting. https://wiki.archlinux.org/index.php/Re … e_you_boot
Other topics about the mismatch between the version of the kernel and the modules seem to be cropping up recently on the forum. Perhaps you will find some answers to your problem in them.
Last edited by lucke (2012-01-14 20:37:43)

Similar Messages

No longer able to boot into OSX

My Mac Mini will only boot to Windows XP (I realise this situation is not without some degree of irony).
Bootcamp has been installed for several months and I have had no problems booting between OSX and XP. I have not booted into XP recently only OSX and there have been no problems.
Today I booted up from a shutdown and found that my Mac Mini booted into XP. I wasn't too worried so went into the Boot Camp control panel and selected "Restart in OSX". As Windows was shutting down, I noticed that it was installing several updates. My Mac Mini proceeded to boot back into XP and continued to install the remaining components of whatever updates it had previously been installing.
So I repeated the Boot Camp control panel drill several times...each time, despite selecting to restart in OSX, it would restart in XP.
I then tried holding down the Option key and was duly presented with the two partitions - "Hard Drive" or "Windows"...I selected Hard Drive (i.e. OSX)...and the system booted into Windows! Repeated this exercise but this time trying the second partition (i.e. Windows)...and the system booted into Windows (as you would expect).
I have not done anything to the partitions/hard drive in recent months...the only thing I can think of is that I may have installed some Mac OSX updates earlier today...
Any assistance to help me boot back into OSX would be appreciated (I realise my worst case scenario is a reinstall).
Thanks
Darren

Thanks Stefan.
I followed your instructions which did detect some errors in both the disk and permissins which I have repaired. I then reran the verify to check that there were no more errors. Following that I selected the Mac OSX startup volume and initiated a restart...it still boots into Windows!
Understanding how to use the repair features of the OSX DVD was useful but unfortunately I am still looking for a solution.
As a last effort, I tried rebooting while holding down the 'X' key...this did produce an onscreen log for a split second...from what I can make out in the short time it is onscreen...it appears to be trying to load the mac kernel and there is an error message saying "Read file failed: status"
Any further ideas would be appreciated.
Thanks
Darren

Restart failed - no longer able to boot

I plugged a USB external DVD (as my B&W has only a CD-Rom) in order to install OS X. I was able to get to the OS X Welcome page, wher it ask to RESTART. As the RESTART did not work, I went to the startup disk select, saw the DVD with OS X, selected it, then clicked on RESTART from the Welcome screen of OS X.
Now, surprise : all I get is a dolder with a question mark (?) blinking. The Support online here says to go back and select another startup disk, which *of course* I cannot do!
I disconnected the DVD, retried many times, there is nothing to do.
Any insight or trick so I can restart this machine ?
Thanks,

Check firmware (see link later in post)
This may sound like an involved solution but the USB ports come online too late in the boot sequence to use as boot device.
Instead, consider replacing CD drive with a new DVD burner. You can pick up a DVD+-RW for about $40-80 at any computer store. Or open the USB burner case you have and remove the drive.
Open your B&W (power down of course)
For a temporary work around, notice that there are 2 ATA cables on the motherboard. Unplug the chain to the optical/ZIP carrier. Plug any ATA 33/66/100 cable into the system board and your DVD drive. Make sure your optical drive is set to master (check jumper settings). There are several unused power connectors in a Yikes case, use any one.
Restart with your CURRENT OS. Check system profiler to verify drive. (Burning may not be supported fix that later by visiting http://patchburn.de and get Patchburn. It installs profiles for ANY burner not Apple OE.)
Now insert your install DVD, hit restart (don't change start up disk) and hold down "C". If your B&W doesn't boot to 10.4 DVD you can release the "C" and it will boot to original drive. If is doesn't boot to 10.4 check firmware updates
http://docs.info.apple.com/article.html?artnum=86117
And seriously consider installing that cheap DVD drive in your B&W. The Yikes case is really easy to upgrade. And if you are brave you can turn that G3/400 (100 FSB) into a G3/472 (105 FSB)
G4/533 Dual Mac OS X (10.3.9)

My new WD hard drive is no longer able to boot. How do I fix this?

I got a WD10EALX Cabiar Blue drive last week and copied my existing internal drive that had Tiger OSX on it. It booted fine until I copied an iphoto library from a friend's Mac and now this disk won't boot. I get the circle with the slash through it and the folder with the question mark on it. I ran it through disk utility and it was verified with no problems. What should I do from here?
Western Digital Caviar Blue 1 TB,7200 RPM (WD10EALX) Hard Drive

Well, assuming you mean you repaired permissions in Disk Utility, and that you ONLY copied some data/media files, and didn't go beyond 85% full, I'd say go back to square one on this experiment.
A better approach is to leave or have an "OS only" boot drive, with apps of course, and keep data and media files on another disk drive - the beauty of having four internal hard drives.
By the sounds of it you are using an external drive too. That alone can sometimes be a problem.
As for "verify with Disk Utility" back in Tiger, I give it iffy grade and marks. Repair AND use Disk Warrior.

No longer able to boot - failure with /boot

I recently, due to a hard drive change, rebuilt my desktop. Every now and again, since then, it hasn't booted. I just logged into root and rebooted; figuring I'd sort it out at some point.
Only, now it won't boot at all. When I go through journalctl -xb I get the following errors (the ellipsis, in case it isn't clear, indicate an number of lines with no error in between the error messages):
Job dev-sda2.device/start timed out.
Timed out waiting for device dev-sda2.device.
Dependency failed for /boot.
Dependency failed for Local File Systems.
Triggering OnFailure= dependencies of local-fs.target.
Dependency failed for File System Check on /dev/sda2
and also, much later in the logs:
Failed at step EXEC spawning /bin/plymouth: No such file or directory
My initial assumption would have been that the relevant drive is failing, but I only recently ran a check on the drives (a few days ago and since the rebuild) and all was fine and dandy - but I had already been seeing these errors on a periodic basis. Only now, as I said, they happen at every boot and I never get as far as login.
Thanks in advance for any help.

I ran the extended smartmontools test on the disk today and it returned with no errors. However, the error log for the disk did contain the following:
Complete error log:
SMART Error Log Version: 1
Warning: ATA error count 21 inconsistent with error log pointer 5
ATA Error Count: 21 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.
Error 21 occurred at disk power-on lifetime: 10341 hours (430 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
c8 00 08 00 00 00 e0 08 01:12:12.224 READ DMA
27 00 00 00 00 00 e0 08 01:12:12.224 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 0a 01:12:12.224 IDENTIFY DEVICE
ef 03 45 00 00 00 a0 0a 01:12:12.224 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 01:12:12.224 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 20 occurred at disk power-on lifetime: 10341 hours (430 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
c8 00 08 00 00 00 e0 08 01:11:26.048 READ DMA
27 00 00 00 00 00 e0 08 01:11:26.048 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 0a 01:11:26.048 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 01:11:26.048 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 01:11:26.048 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 19 occurred at disk power-on lifetime: 10341 hours (430 days + 21 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
c8 00 08 00 00 00 e0 08 01:10:16.816 READ DMA
27 00 00 00 00 00 e0 08 01:08:51.584 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
ec 00 00 00 00 00 a0 0a 01:08:51.584 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 0a 01:08:51.584 SET FEATURES [Set transfer mode]
27 00 00 00 00 00 e0 08 01:08:51.568 READ NATIVE MAX ADDRESS EXT [OBS-ACS-3]
Error 18 occurred at disk power-on lifetime: 10340 hours (430 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 00 01 00 00 00 e0 08 00:04:28.384 READ DMA EXT
c6 00 10 00 00 00 e0 08 00:04:28.384 SET MULTIPLE MODE
91 00 3f 00 00 00 a0 08 00:04:28.384 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 00 00 00 00 a0 08 00:04:28.352 RECALIBRATE [OBS-4]
25 00 01 00 00 00 e0 04 00:04:28.352 READ DMA EXT
Error 17 occurred at disk power-on lifetime: 10340 hours (430 days + 20 hours)
When the command that caused the error occurred, the device was in an unknown state.
After command completion occurred, registers were:
ER ST SC SN CL CH DH
84 51 00 00 00 00 e0 Error: ICRC, ABRT at LBA = 0x00000000 = 0
Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
25 00 01 00 00 00 e0 08 00:04:28.288 READ DMA EXT
c6 00 10 00 00 00 e0 08 00:04:28.288 SET MULTIPLE MODE
91 00 3f 00 00 00 a0 08 00:04:28.288 INITIALIZE DEVICE PARAMETERS [OBS-6]
10 00 00 00 00 00 a0 08 00:04:28.272 RECALIBRATE [OBS-4]
25 00 01 00 00 00 e0 04 00:04:28.272 READ DMA EXT
Does this mean my disk is dying? That would be very annoying after just rebuilding from another failed disk!

MSI K7N2 No longer able to boot up (Thinking PSU problem)

I have a computer that was a hand-me-down from my husband that he originally built 12 years ago. Recently I've been having trouble turning on the computer. I will hit the power button, hear the fans running, but nothing else will power on. There are no hard-drive beeps, the keyboard and screen won't respond. The mouse lights up, but is useless.
Before yesterday I could hit the restart button, or use the power button to turn it back off and back on to get the computer to boot up. I would have to do this up to 8 times before it would catch, but eventually it would turn on. Yesterday the computer was on when it reverted to just the fans running and nothing else. I tried restarting it multiple times, but it never booted. I opened it up, cleaned the mountain of dust, checked all the connections and tried again. After many restart attempts with no response aside from running fans I figured it was time to ask for help.
I think it is a power supply issue
Enlight Corporation HPC-340-101
+5V - 30A
+12V - 15A
+3.3V - 28A
340W
The power supply has never been replaced so it is 12 years old.
I have been considering building a new computer and was looking at this power supply:
Antec High Current Gamer Series HCG-750 750W ATX12V v2.3 / EPS12V v2.91 SLI Certified CrossFire Certified 80 PLUS BRONZE Certified Active PFC
Would this fry my old motherboard? My husband said that was possible, so I'm hesitant to try.
Please let me know if I've done something wrong, or not provided enough information. I will keep my computer opened up until I hear from someone so I can answer any questions if need be. I've put my other computer specs in my signature. Let's see if they actually post

So I tried my Mother-In-Law's PSU since my husband is over-protective of his computer. No luck. I took out the graphics card and it was pure luck that my husband remembered one of his siblings left an old computer in the spare room. It had an old GeForce FX 5200 128Mb, so I salvaged it and it worked! My computer booted up on the first try! I had to switch back to my PSU as my Mother-In-Law is still using hers, but it still started up perfectly! I am so excited! Of course this means I don't have a valid reason to push for my new computer, and I probably can't play the Sims 3 anymore, but I still have a working computer
Thank you guys so much!

[Solved] No longer able to reboot/shutdown in latest XFCE...

After upgrading to the latest XFCE, the option to reboot and shutdown in the Action Buttons panel is greyed out... I guess this is a permission problem but how do I fix it?
Regards,
BTJ
Last edited by bjorntj (2012-05-11 06:09:55)

Actually, I was a bit quick... I search and found the solution... The problem was an update of slim....
And yes, I am starting xfce from .xinitrc...
Solution: Replaced my xfce start command in .xinitrc with..
exec dbus-launch --exit-with-session startxfce4
BTJ
Last edited by bjorntj (2012-05-11 06:10:57)

Not able to boot OES admin server

Hi,
I am not able to boot the admin server after running the install-ales-schema.bat. It gives Arme not Ready Exception.
<Apr 24, 2010 9:03:12 PM CDT> <Critical> <WebLogicServer> <BEA-000386> <Server subsystem failed. Reason: Weblogic.security.SecurityInitializationException: User admin is not permitted to boot the server; The server policy may have changed i
n such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions. weblogic.security.SecurityInitializationException: User admin is not permitted to boot the server; The server policy may have changed in such a way that the user is no longer able to boot the server.Reboot the server with the administrative user account or contact the system administrator to update the server policy definitions.
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.do
BootAuthorization(CommonSecurityServiceManagerDelegateImpl.java:991)
at weblogic.security.service.CommonSecurityServiceManagerDelegateImpl.in
itialize(CommonSecurityServiceManagerDelegateImpl.java:1029)
at weblogic.security.service.SecurityServiceManager.initialize(SecurityS
erviceManager.java:854)
at weblogic.security.SecurityService.start(SecurityService.java:141)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
Truncated. see log file for complete stacktrace
>
Edited by: user12057577 on Apr 24, 2010 3:17 AM

Hi,
Can you mention the steps you used before running the ales_install script? Which WLS version are you using for Admin Server? Is it CP3 or CP4 patched?

After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

After getting an update from 10.6.8 many of my programs were no longer able to open. How can I undo the update or solve this problem another way?

Do you have a bootable clone from prior to the update? If so, roll back with that.
Are your apps that won't open PPC and do they need Rosetta? Do you need to activate Rosetta?
Have you considered reinstalling 10.6 from your install disc and then coming forward with the 10.6.8 Combo Updater, then doing software update and not including whatever it was you installed that caused this propblem?
By the way - what update was it that caused this problem?

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1

I'm no longer able to select the file size when emailing a photo. How can I solve this? iPhone 4S with iOS 7.1.1. Thanks a lot.

Yeah - I tried that, several times; each time I get "iTunes is restoring the software on this iPhone" and after about 30 minutes the screen on the phone lights up again with the same screen I had before. After that ... nothing.

Mac Pro not able to boot into 64 bit kernel?

Hello,
I've been trying to boot while using the 6 and 4 buttons held down to no avail. This mac pro was bought in 2007 (work computer). Am I not able to boot into 64 bit mode with Snow Leopard? If so, does that mean I can't take advantage of the 64 bit kernel?
Thanks,
Scott

Man, Yes, when I am rendering all 8 cores in Maya, up to 4 gigs of ram are being used. Why is that so hard to believe? I should be able to render in RAM preview in After Effects a whole lot more than i can now without cacheing.!!!!
Is Maya a 64 bit application? If Maya is not using more than 4GB, than you should be talking to the Maya developers.
You should be able to use Applications -> Utilities -> Activity Monitor and look at the "Kind" field. If it says "intel (64 bits)", then it is a 64 bit application.
How many times do I have to state "YES, I will be using more than 4 gigs of RAM per program"?
Why is it the tech people really don't understand how intensive program dynamics like Maya and Blender are,
You are responding to my post, so I'm going to say, I have been working for major computer manufactures since the early 70's working with "Big Iron" computer systems, not PCs, and I most likely know a lot more about how computers work, then many computer users. Please do not tell me I do not understand. I've been working with 64 bit code since the early 90's.
and yet Apple touts their excellence in 64 bit programs like AFX, yet, I can't use more than 4 gb of RAM?
Are you saying AFX (is that After Effects?) is not a 64 bit application yet? If not, then I suggest you talk to Adobe, not Apple.
Just for fun, I wrote a sample program, which allocated a large amount of memory. I ran it on my iMac with is booted with a 32 bit 10.6.2 Snow Leopard kernel. Here are the results:
PID RESIDENT VIRTUAL PageFlt Reclaim COMMAND
54296 4.74G 9.32G 0K 0K tmp
My program has more than 4GB of physical RAM (4.74GB), and a virtual memory size of 9.32GB.
If I use Activity Monitor, I can see that my program is listed with a Kind of "intel (64 bit)".
So if Maya cannot use more than 4GB of memory, it is a Maya problem. Talk to the Maya developers.
We aren't cows Apple. We are people with limited money trying to make it in the world. Not every mac pro user is a business and we don't want too much control.
You are not talking to Apple, just other Mac users. If you wish to tell something to Apple, I would encourage you to use either:
<http://www.apple.com/feedback/macosx.html>
or
<http://bugreporter.apple.com>
Free ADC (Apple Developer Connection) account needed for BugReporter

[SOLVED] SLiM no longer able to switch desktop environments

So after the latest upgrade of slim (1.3.5 -> 1.3.6) I am no longer able to switch between desktop environments using F1. Now it just boots my default environment (dwm). I had it configured fine and it worked before this update. Is there a fix?
Last edited by life_enjoyer (2013-10-06 17:46:52)

xinitrc:
#!/bin/sh
# ~/.xinitrc
# Executed by startx (run your window manager from here)
if [ -d /etc/X11/xinit/xinitrc.d ]; then
for f in /etc/X11/xinit/xinitrc.d/*; do
[ -x "$f" ] && . "$f"
done
unset f
fi
case $1 in
kde)
exec startkde
xfce4)
exec startxfce4
openbox)
exec openbox-session
dwm|*)
#xcompmgr -c &
while true; do
xsetroot -name "$( date +"%m-%d-%Y %R" )"
sleep 1m # Update time every minute
done &
nitrogen --restore &
/usr/bin/xscreensaver -no-splash &
exec dwm
esac
and slim.conf
# Path, X server and arguments (if needed)
# Note: -xauth $authfile is automatically appended
default_path /bin:/usr/bin:/usr/local/bin
default_xserver /usr/bin/X
xserver_arguments -nolisten tcp vt07
# Commands for halt, login, etc.
halt_cmd /sbin/shutdown -h now
reboot_cmd /sbin/shutdown -r now
console_cmd /usr/bin/xterm -C -fg white -bg black +sb -T "Console login" -e /bin/sh -c "/bin/cat /etc/issue; exec /bin/login"
#suspend_cmd /usr/sbin/suspend
# Full path to the xauth binary
xauth_path /usr/bin/xauth
# Xauth file for server
authfile /var/run/slim.auth
# Activate numlock when slim starts. Valid values: on|off
# numlock on
# Hide the mouse cursor (note: does not work with some WMs).
# Valid values: true|false
hidecursor false
# This command is executed after a succesful login.
# you can place the %session and %theme variables
# to handle launching of specific commands in .xinitrc
# depending of chosen session and slim theme
# NOTE: if your system does not have bash you need
# to adjust the command according to your preferred shell,
# i.e. for freebsd use:
# login_cmd exec /bin/sh - ~/.xinitrc %session
login_cmd exec /bin/bash -login ~/.xinitrc %session
# Commands executed when starting and exiting a session.
# They can be used for registering a X11 session with
# sessreg. You can use the %user variable
# sessionstart_cmd some command
# sessionstop_cmd some command
# Start in daemon mode. Valid values: yes | no
# Note that this can be overriden by the command line
# options "-d" and "-nodaemon"
# daemon yes
# Available sessions (first one is the default).
# The current chosen session name is replaced in the login_cmd
# above, so your login command can handle different sessions.
# see the xinitrc.sample file shipped with slim sources
sessions kde,xfce4,openbox,dwm
# Executed when pressing F11 (requires imagemagick)
screenshot_cmd import -window root /slim.png
# welcome message. Available variables: %host, %domain
welcome_msg Welcome to %host
# Session message. Prepended to the session name when pressing F1
# session_msg Session:
# shutdown / reboot messages
shutdown_msg The system is halting...
reboot_msg The system is rebooting...
# default user, leave blank or remove this line
# for avoid pre-loading the username.
default_user sebastian
# Focus the password field on start when default_user is set
# Set to "yes" to enable this feature
#focus_password no
# Automatically login the default user (without entering
# the password. Set to "yes" to enable this feature
#auto_login no
# current theme, use comma separated list to specify a set to
# randomly choose from
current_theme archlinux-simplyblack
# Lock file
lockfile /var/lock/slim.lock
# Log file
logfile /var/log/slim.log

I guess I didn't explaine that I have a healthy operating Windows 8 Boot camp partition on my hard drive. When I upgraded to Mavericks I am no long able to access the bootcamp partition from the disk icon in system preferences; the Windows 8 works fine.

On both Mini Mac and iMac 27" I am no longer able to utalize the Startup Disk icon in System Preferences; the Windows 8 on Bootcamp partition works fine if I close the Mavericks OX and select the Windows partition at bootup from the hard drive. My question is why don't the icon in System Prederences work anymore since I upgraded to Mavericks. Also, Users & Groups, Printers & Scanners icons no longer work either.

On both Mini Mac and iMac 27" I am no longer able to utalize the Startup Disk icon in System Preferences; the Windows 8 on Bootcamp partition works fine if I close the Mavericks OX and select the Windows partition at bootup from the hard drive. My question is why don't the icon in System Prederences work anymore since I upgraded to Mavericks. Also, Users & Groups, Printers & Scanners icons no longer work either.

LightScribe SuperMulti DVD±R/RW with Double Layer Support is no longer able to read all lightscribe discs(Blank or Containing Data)

Hi,
The product Name of my computer is: HP Pavilion dv6-6093ex Entertainment
Notebook PC support
The number of my computer is : LM610EA#A2N.
Could anyone please at this splendid forum take some of their precious time
out to really reply my questions and solve my problems?
FIRST OF ALL:
My HP Pavilion Laptop is about 3 years old.
My
sister's Dell Inspiron laptop is 3 years old.
My HP laptop is well-cared, as opposed to my sister's Inspiron Dell laptop, which is always thrown in dust without caring at all. Also, its battery is always inserted even when it is fully charged while the laptop is plugged in to the main power supply.
However, my laptop is either used on only battery, or on plugin. Also, it is kept from the dust. But, I really found that the battery of the Dell laptop still lasts about three and half hours, and there is no problem cooling fan is not properly properly.
I only remember one thing differently done on my laptop battery which is I charged it fully, then I stored it without using it for about four months, then when I reused it, I found it got worse over time. I.e. first time of using it after storing,I found
it empty, then I charged it again fully, however, then it lasted about 2 hours, then 1 and half hours, next an hour, now it is only lasting about 20 minutes without performance. If there is high performance, then
the computer shuts down suddenly.
My problem is follows:::
First: Whenever I inserted any Containing Data OR Data CD/DVD-RLightScribe discs, I found that HP optical driver was
unable to read them. When clicking on the optical disc drive 'double-click' while disc was inserted, then I found that disc opened as this way(NOTE: With a CD/DVD player is grayed out)
I was told 'I suspect the culprit might be hardware and lightscribe dive might be
corrupt. Please sent it to service center to check. In addition, this thread could be as a reference:
http://answers.microsoft.com/en-us/windows/forum/windows_vista-hardware/media-in-cddvd-drive-is-not-readable/794fe26a-7e47-45c4-a50b-0af2ed53f75b'
Since no one replied to me at HP forums, although my HP laptop is one of their products, I had to post my problem here to know if my driver is corrupted and needs to be replaced or not.
Blank Or Used(containg data) CD/ DVD ±R/RW lightscirbe is unable to be read by optical drive
When clicking on drive 'duble-click', I found it opens like a USB FlashDrive or With a CD,DVD player, however,
: Bare in mind that 'with CD/DVD Player'
is grayed out)
Not Blank(containing data) CD/ DVD ±R/RW NON -Lightscirbe disc opens normal:
Blank CD/ DVD ±R/RW NON-lightscirbe opens normal(Opens like
a USB FlashDrive or With a CD,DVD)::
My LightScribe System Software version is:
I've tried installed the latest version of lightscribe software, then I run
the diagnostic utility, however, the problem still persists.
My HP CD/DVD DVDآ±R/RW specs are::
Optical Drives
hp CDDVDW TS-L633R
Media Type DVD Writer
Name hp
CDDVDW TS-L633R
Availability Running/Full Power
Capabilities Random
Access, Supports Writing, Supports Removable Media
Read capabilities CD-R,
CD-RW, CD-ROM, DVD-RAM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD-R DL, DVD-RW
DL, DVD+R DL
Write capabilities CD-R, CD-RW, DVD-RAM, DVD-R, DVD-RW, DVD+R,
DVD+RW, DVD-R DL, DVD+R DL
Config Manager Error Code Device is working
properly
Config Manager User Config FALSE
Drive E:
Media Loaded
FALSE
SCSI Bus 0
SCSI Logical Unit 0
SCSI Port 0
SCSI Target Id
1
Status OK
Trying to solve the problem,
I have done these steps in order::
I tried checking with dignostic ulitiy:
I have tried Advanced View , this is the file of output data ofdignostic utlity
LightScribe System Software Settings:
SOFTWARE\LightScribe\MessageDir C:\Program Files (x86)\Common Files\LightScribe\
SOFTWARE\LightScribe\LSPrintDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintDialog.exe
SOFTWARE\LightScribe\LSPrintingDialog C:\Program Files (x86)\Common Files\LightScribe\LSPrintingDialog.exe
SOFTWARE\LightScribe\LsPrintLauncher C:\Program Files (x86)\Common Files\LightScribe\LSPrintLauncher.dll
SOFTWARE\LightScribe\ResourceDir C:\Program Files (x86)\Common Files\LightScribe\res
SOFTWARE\LightScribe\LSPrintAPI C:\Program Files (x86)\Common Files\LightScribe\LSPrintAPI.dll
SOFTWARE\LightScribe\Update\UpdateShellCommand http://www.lightscribe.com/go/downloads/windows
SOFTWARE\LightScribe\Update\PreviousVersion 1.18.20.1
SOFTWARE\LightScribe\Update\CurrentVersion 1.18.27.10
SOFTWARE\LightScribe\Update\TrailingVersion
SYSTEM\CurrentControlSet\Services\LightScribeService\Type 16
SYSTEM\CurrentControlSet\Services\LightScribeService\Start 2
SYSTEM\CurrentControlSet\Services\LightScribeService\ErrorControl 0
SYSTEM\CurrentControlSet\Services\LightScribeService\
SYSTEM\CurrentControlSet\Services\LightScribeService\DisplayName LightScribeService Direct Disc Labeling Service
SYSTEM\CurrentControlSet\Services\LightScribeService\ObjectName LocalSystem
SYSTEM\CurrentControlSet\Services\LightScribeService\Description Used by the LightScribe software components to support 3rd party disc labeling applications using the LightScribe COM Application Programming Interface (LSCAPI). This service needs to run for LightScribe direct disc labeling to work.
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\
SYSTEM\CurrentControlSet\Services\Eventlog\Application\LightScribeService\TypesSupported 7
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\0 IDE\CdRomhp_CDDVDW_TS-L633R______________________0300____\4&334f7860&0&0.1.0
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\Count 2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\NextInstance 2
SYSTEM\CurrentControlSet\Services\Cdrom\Enum\1 SCSI\CdRom&Ven_ELBY&Prod_CLONEDRIVE&Rev_1.4\1&2afd7d61&0&000000
SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon\allocatecdroms 0
SYSTEM\CurrentControlSet\Services\CDRom\autorun 1
SOFTWARE\INTEL\Intel Application Accelerator Not detected
Drives and Media:
Drive 0 : hp CDDVDW TS-L633R 0300 219 (E:), Media Imaging Parameter : 114
I tried running the below command line to fix potential disk issue 'Chkdsk/r /f'
I cleaned the drive, discs, and so on.
I have uninstalled the all third-party data recording software.
I have uninstalled the Cyber DVD suite, lightscribe system software
which came pre-installed with my HP pavilion Notebook.
I have recovered my system from the HP Factory Recovery discs.
I have tried opening all those LightScibe discs not opening on my HP optical drive, on a Dell optical drive, and all of them were opened well, although Dell optical drive did not have a lightscribe feature at all., nor third party disc recording software.
However, the problem is still with opening the discs LIGHT-SCRIBE.
Thus, my questions are:
How to determine if the drive is corrupted and needs to be replaced with another one.
I think there something needed to be done on the BIOS Of my HP laptop[[[A similar problems happened on my Desktop computer's optical drive which is as follows (ALL discs are opened as empty by Optical Drive of My Desktop Computer) ---while
my optical drive of my desktop was connected to the
primary slave IDE, and the HDD was connected to the primary master IDE, the optical drive and hard disk are functioning well. However, I remember that while burning an image with Nero essential V: 5, something went wrong, and
then the Optical Drive of My Desktop Computer (HL-DT-ST DVD-RAM GH22NP20) became NOTrecognised/Installed on
BIOS, although it was still shown on the device manager as a recognised device. Also, it was listed on my computer, however, when entering a disc(blank or with data) into the drive, I found it was not recognised, and it opened empty(no files
at it), although it contains data. Thus, I decided to boot to BIOS, and clicked on 'Autodetection for IDE', then I found that only HDD was still shown as installed on BIOS. However, the optical drive was not. Th I tried clicking on it on BIOS and then
clicking on 'enter' to try to let the device be re-recognized. However, that
made no difference. I had to take part my computer ,and then reconnected the optical drive onto thesecondary slave IDE , and let HDD connected to the same
primary master IDE. Then, I found that the problem solved and all discs were read normally. Aslo, optical drive became installed on BIOS.
What is meant with with double Layer Support.
How much does it cost?
A man should convert his anger and sadness into strength to continue living in this life.

Did you try unsinatalling LightScribe application then checking the status ?
This is probably related to the faulty hardware or the application ( LightScribe
Arnav Sharma | http://arnavsharma.net/ Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading
the thread.
Could you please really concentrate with me, and really reply to me to finish this problem pending.
If you had had a look again at my first post, you would have seen that I said that I have done some things, among of which is: I have uninstalled the Cyber DVD suite, lightscribe system software
which came pre-installed with my HP pavilion Notebook.
Yes, you're right the two threads below are concerned about one issue.
https://social.technet.microsoft.com/Forums/en-US/w7itpromedia/thread/5c1aa5e8-9728-492b-a5c3-387f29ee4b6e/#d6f63628-29a3-4adf-b33f-03b33c138910
https://social.technet.microsoft.com/Forums/windows/en-US/683997ff-1004-4579-b69d-5e982746c917/lightscribe-supermulti-dvdrrw-with-double-layer-support-is-no-longer-able-to-read-all-lightscribe?forum=w7itpromedia
However, this thread contains more precise details and screen shots about the problem. I was not able to understand whether all lightscribs were not unable to be read or not. However, I now recognized that, and I recognized that only all LightScribe(empty
or used) discs are unable to be read. furthermore, that other thread got far too longer to be followed.
Moreover, I would like you to take some time out to answer my problem about Lighstscribe discs since I am going to purchase 'A battery, Cooling Fan' From the HP agent in Yemen, which is far away from me about 1000 Km. Thus, If my optical disc drive was corrupted
as well, then I would be requesting the 'optical disc drive' as well from the HP along with 'Battery, Cooling Fan' .
A man should convert his anger and sadness into strength to continue living in this life.

After updating to 10.7.3 I am no longer able to connect to the internet.

Updated to 10.7.3 this morning on my Macbook Air (Oct. 2010 model). After restarting, I am no longer able to connect to the internet. I can connect to the router, and pull a valid IP address (sometimes - other times I get an automatic private IP), but I am unable to get to any websites, check email, etc. I am able to ping websites AND visit websites using their IP addresses, but not using their DNS names.
I called Applecare this morning, and the tech walked me through some troubleshooting steps, including:
Rebooting into Repair partition to check connectivity there (same issues, no change)
Deleting and recreating various config files (Networkinterfaces.plist, preferences.plist and com.apple.airport.preferences.plist) (no change)
I've also tried reinstalling the update (both delta and combo), repairing disk permissions and rebooting into safe mode, nether of which has solved the issue.
Also on the network are (Mini, not updated to 10.7.3), a PC, my iPhone and an Apple TV, all of which aren't experiencing any issues. Any ideas?
Thanks.

Here is something to try. Boot into the Recovery HD by holding
down Command+R when booting. Select the get help online option.
It initially opens Safari with a local web page, but you can use
the bookmarks on the bookmark bar or even enter a website.
Many extensions may not be available but it could tell you if
it is your Lion install that is a problem or perhaps a hardware
problem.
If you can browse around in this mode, then it could eliminate
any possible hardware issues. If you still have problems, then
the issue could possibly be hardware/driver related.
Give it a shot and see what happens.

[Solved] No longer able to boot Kernel

Similar Messages

Maybe you are looking for