[SOLVED]No more sound in flash, but kmix shows a stream

Hello all,
I'm fairly new (and happy that I switched) to Arch . When I installed Arch on my x86_64 based laptop everything worked fine. Somewhere along the line I lost sound in flash. I use KDE with the defaults for sound: Phonon, Pulse, and ALSA. For my phonon backend I'm using VLC, but have also tried gstreamer. I first realized the issue in late November and have since been wrestling with it in my spare time to no avail. I have tried everything in the forums and wikis that I could find (even if it seemed like it didn't apply). The one difference that I'm experiencing that no one else has posted is that I have a stream show up in kmix when a video is playing, but still have no sound. It's not muted, and I can move the volume slider with no change. I have no idea when exactly it broke, or what update may have caused it. Has anyone had this issue and solved it without posting? Can anyone offer some troubleshooting advice? I was previously a Gentoo user of 6+ years and wonder if there are any Arch tools similar to equery (depends and depgraph flags) that can help me find all the packages installed that are related to flash? Also, is there anything in Arch that is similar to the Gentoo emerge log? I would like to clean out everything flash and pulse related and start from scratch, but don't know the best way, or even a clean way, to approach this.
Thank you in advance for any help offered.
Regards,
Joseph
Last edited by jdwieber (2012-01-13 18:46:16)

@alexkarro Thanks for your quick reply and for the links. Unfortunately, I followed the advice from both links. I have both lib32-alsa-plugins and lib32-libcanberra-pulse installed. From what I understand about the first link, my default device is the correct device. But just in case I'm wrong I pasted the output from aplay and my asound.conf below. Am I misinterpreting the output to aplay, or configuring my asound.conf wrong? Originally, when it worked, I got all the config instructions from https://wiki.archlinux.org/index.php/PulseAudio.
Thanks again.
jdwieber@beast:~$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC892 Analog [ALC892 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC892 Digital [ALC892 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
jdwieber@beast:~$ cat /etc/asound.conf
# Use PulseAudio by default
pcm.!default {
type pulse
ctl.!default {
type pulse
# Explicit PulseAudio device
pcm.pulse {
type pulse
ctl.pulse {
type pulse
# vim:set ft=alsaconf:

Similar Messages

Help! No sound from speakers but icon shows its working

I have a Win7 HP G71 that the sound just quit. Everything looks as if it is fine but no sound. Almost like the speakers were disconnected. Any thoughts on why it did this and how to fix it?
This question was solved.
View Solution.

Hi,
From windows Control Panel, open Device Manager and open up Sound, Video and Game Controllers. Can you post back with the all the devices listed here and if any have warning triangles against them. Can you also post the full Model No. or Part No. of your notebook.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

No Sound with Flash Player 9 on ubuntu 7.10

I hear no sound when I play back flash clips on my ubuntu 32
bit 7.10, using Flash Player 9.0 r48. I downgraded to version 7 and
had sound, only to find that the 7 version has a known bug where
audio/video get unsynchronized after some time. Now I am back using
current 9.0 r48, and have no sound at all.
Any hint?

Thanks for your responses twiistedkaos & mouse256. I launched firefox from the command line, but no error messages were received when viewing flash content. Also, I do not have additional flash support installed (only the latest flash plugin from the extra repository).
I am loading modules snd_emu10k1 and snd_pcm_oss in rc.conf. If I remove (do not load) snd_emu10k1, then I get sound from flash, but no sound from media or games. When I load snd_emu10k1, then I have sound in media and games, but no sound from flash.
This has turned out to be an alsa configuration issue. My flash 9 sound is fine now.

No Sound with Flash Player 9

Hello,
After installing Flash Player 9 (extra/flashplugin 9.0.31.0-1), I get no sound when viewing flash content. I have verified this against multiple web sites. I can view the flash video with no problems.
The sound on my previous flash version was fine. Also, the sound on my other applications (multimedia and games) still works fine. My alsa configuration has not changed (to the best of my knowledge).
Any help would be appreciated!

Thanks for your responses twiistedkaos & mouse256. I launched firefox from the command line, but no error messages were received when viewing flash content. Also, I do not have additional flash support installed (only the latest flash plugin from the extra repository).
I am loading modules snd_emu10k1 and snd_pcm_oss in rc.conf. If I remove (do not load) snd_emu10k1, then I get sound from flash, but no sound from media or games. When I load snd_emu10k1, then I have sound in media and games, but no sound from flash.
This has turned out to be an alsa configuration issue. My flash 9 sound is fine now.

[solved] Sound in flash stopped working (alsa, x86_64, rate)

Why?
Sound in flash stopped working (alsa, firefox, x86_64). Tried flashplugin-prerelease from archlinuxfr: nothing different.
Everything worked before I rebooted. I changed nothing else since last reboot. Can't figure out what happened.
Updates among other things:
firefox, xulrunner (firefox I did restart - the new one had sound in flash before I rebooted)
openal, lib32openal (don't think that has anything to do with it?)
libsndfile (that's something entirely different, too, right?)
And a lot of others that don't look related... no Idea how many really, I haven't rebooted in quite a while. Maybe there even was a kernel update since last reboot. Or two.
edit: Also some interactive flash stuff that did work before has stopped working now.
edit2: Chromium doesn't have sound in flash either. Tried recompiling firefox / switching to AUR/firefox-pgo: no change. Everywhere else, sound is working fine. Also, several flash games I tried get stuck / freeze after intro.
Thx!
Last edited by whoops (2011-03-25 07:31:43)

Couldn't find any changes there:
I LC_ALL=C aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: AD198x Analog [AD198x Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: AD198x Digital [AD198x Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
I tried the multilib version and the x86_64 prerelease. Both did work perfectly fine before I rebooted (I tried which one works better recently and couldn't see any real difference). Didn't have trouble with flash for months before this reboot.
I found a few modules I was unfamilliar with were loaded:
snd_seq_os snd_seq_dummy snd_seq_midi_event snd_seq snd_seq_device
... and removed them with rmmod. No change. (I should have restarted alsa at that point I guess just to make sure, those weren't the problem?)
Then I changed the rate in asound.conf to 41000 and restarted alsa - now everything works again! Strangely, no more freezes too (those were reliable).
I remember having had problems with flash not having sound unless I set the rate to 41000 about a year ago. After some updates, I tried again and all rates supported by my sound-card seemed to work. My guess would be regression in whatever fixed that problem... but I don't know.
I'll leave that "unsolved" until I manage to figure out what it really was about.
Last edited by whoops (2011-03-24 22:17:11)

Do third party replacement tips fit on the apple in ear headphones? I prefer foam tips as they block out much more sound, but I'm not sure if Apple use the standard fitting for headphone tips!?!?!?!

Do third party replacement tips fit on the apple in ear headphones? I prefer foam tips as they block out much more sound, but I'm not sure if Apple use the standard fitting for headphone tips!?!?!?!

Answer found. Please find below an amazon review explicitly mentioning adding third party foam tips. Sounds like they fit and work like a dream:
"As a audio engineer, I own about a dozen different sets of earphones and in-ear 'phones. My favorite, by far, are my sure SE530s. I have some Sennheiser cx400s which are good workhorses, but lack the finesse, clarity and stunning accuracy of the Shures. For convenience, I bought the Apple's, as I wanted something I could use with the phone for calls.
I found the sound to be quite clear and beautifully clean, but like many, no matter how I tried, the stock Apple tips never made a good seal. The seal is absolutely essential to getting bass out of a balanced armature design. For you non-engineers, just trust me that if you don't have a proper seal, you will have no bass.
In my case, I think the trouble had to do with the largest size being a tiny bit too small, and the silicon being too rigid, yet slick, so they left small airgaps and were easy to remove. I tried using some foam tips from a third party, but their large was more of a medium, and never came close to a snug fit.
As an experiment, I dug around in my ear-tips from my Shure's and tried their rubber tips which are about the same size as Apple's large tips, but made of a more pliant and slightly sticky rubber.
OMG, what a transformation. Suddenly the sound blossomed, the bass became rich and well balanced, and the "top-heavy" sound was totally mellowed into a rich, well balanced and incredibly detailed presentation.
Make no mistake, these are the best 'phones under $200 I have ever heard. The bass is deep and warm, very detailed, and totally lacking fuzz or buzz that I can hear in the Sennheiser set. Look at getting tips from a better headphone. The trick is it has to have a soft rubber base that can expand over Apple's slightly larger stub. Some tips, like the Shure foam tips, have a rigid plastic sleave in the tip to keep it's position correct, and these won't expand over the larger Apple posts."

[SOLVED] No sound (with flash)

Hello.
I have no sound with flash. It does work elsewhere.
I am using ALSA.
My flash should output audio correctly according to wiki: https://wiki.archlinux.org/index.php/Fl … d_in_Flash
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
EDIT: I'm retarded. I didn't add my user to audio group. And sound elsewhere was from speaker-test which needs SU.
Last edited by handl3r (2012-01-22 07:39:34)

codemac wrote:
Orrrr it's because the flash plugin uses OSS.
run `aoss firefox` and be happy.
OSS does still work or at least the alsa backwards compatibility layer that emulates the old interfaces, right? did i miss anything?
for newer versions of flash (like version 9) simply install firefox in wine and let it install the plugin. that usually works great!

No Sound In Flash Applications

Hello.
So, about 3 month ago or later, adobe had announced the new version of ADOBE FLASH PLAYER, i think it was 10.1. When i updated my flash player to version 10.1, my sound in my browser (im using MOZILLA FIREFOX) had gone. I cant hear any sound in youtube, i cant hear any sound in flash games, but video goes normal. I have searching reason for a long time. I have found many sollutions, and i have tryed all of them on my pc. Im a power user in computer, im not a begginer, but i cant solve this problem. Now i got Windows XP, SP3, and installed adobe flash player of version 10.1.82.76. Maybe some one can help me???

Hi eidnolb,
You are certainly right about resolving audio issues.
Actually you pointed me in the right direction when you told NoviceGG to go to administrative tools. While in the control panel I decided to check out QT first. I am not a big fan of QT and rarely use it but others in my house like to use iTunes for their iPods and QT comes bundled in the download. At any rate, iTunes was updated and along with it came an update for QT. I think someone downloaded an .flv file and when they played it with QT it set the streaming video default to QT. At least that is what I believe happened, although I am not 100% certain. I don't think QT was automatically set as the default streaming video player when it was downloaded but that is a possibility also.
I had no audio for any streaming video in any browser, FF, Chrome, and IE. Video was fine in all three.
Somehow QT gets it's own Control Panel category. Which is actually only QT preferences. Seven tabs across the top: Register; Audio; Browser; Update; Streaming; File Types; Advanced.
The first tab I clicked was the Audio tab. But that is more of a device manager and you can select bit rate, channels, and size (8 bit, 16 bit, or 24 bit). I realized that wasn't it then went to the Streaming tab and that deals with connection speeds, delays, and an instant-on option. Not it either. So I hit the File types tab and it reads; 'Select the file types for which you want QuickTime player to be the
default player.' Top box; Streaming-Streaming movies was checked. These are expandable boxes (with the + to show more specific file types). Seven expandable boxes to check or uncheck:
Streaming-Streaming movies;
Video-Video only and video with audio file formats;
Audio-Audio only file formats;
MPEG-MPEG system, video and audiofiles;
MP3-MPEG Layer III movies and streams;
Images-Simage files
Miscellaneous-Miscellaneous file formats
I unchecked the top box the tested it and that was it. I thank you very much for pointing to the control panel. You are a very helpful member of the forum.
I actually just now joined so I could share my discovery with NoviceGG.
I hope this helps you out with your knowledge base a little eidnolb.
Thanks again!
plee426

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

I have a iPhone 4S and when watching videos on the internet sound cuts out as the video is playing. The rest of the video plays with no sound. Sometimes when I pause It and play again sound comes back but not all the time. can anyone help?

The "restore disk" is built into the Mac. See About Recovery.
Need more specifics about what error messages you got while installing Adobe Flash.
However, you can almost avoid Flash altogether by setting YouTube to play the HTML5 version instead.
Click the Try something new! link at the bottom of the YouTube page.
I don't know about the sound issue. Might be hardware as you think. Try other headphones to check.

XML shows in Flash, but doesn't show on server?

Hello.
I have a Flash website with 5 sections (Featured Work, News, About Me, Services, Contact). All the sections works fine, both in Flash and on the server, if the content isn't loaded from XML. But in the News section i use XML for loading the news.
If i test my movie in flash, the whole site works fine, and the XML News works perfect. But if i test the movie in a virtual server (like MAMP) or if i test it on my own server, the news section doesn't show.
I can't seem to find the problem?
Jonas Philippon

I'm sorry to sound so stupid, but this is new to me.
I tried pasting the trace(MT2.newsNum,Number(MT2.newsNum)) in both out and in the for loop, and i still get the same trace "5 5"
I'm not really sure what to do, so i'll just try explaining my whole site to you:
I have my "main.fla" with three layers with actionsscript:
- Navigation Actions
     - Has a for loop that creates 6 textfields with clickevents and SWFAddress that changes between 6 frames in a MovieClip (SubNavBar).
- Positioning Actions
     - Positions the textfield buttons, the navigation bar, and the sub navigation bar in the SubNavBar movieclip, and places my dynamic background.
- XML
     - I can't explain the XML layer, so i have attached it.
The SubNavBar MovieClip has 6 frames. The 1 is empty, so the site is clear at first. In frame 2, 4 and 6 there is a for loop like in the navigation layer, so these layers have a sub navigation bar, that once again changes between some frames in a movieclip.
In frame 3 their is the news code i pasted earlier, and in frame 5 there isn't anything yes, but it should just be graphics.
XML LAYER:
// XML LISTS //
// ========= //
var newsTitle:XMLList;
var newsInfo:XMLList;
var newsContent:XMLList;
var newsTitleArray:Array;
var newsInfoArray:Array;
var newsContentArray:Array;
// NUMBER OF ITEMS
var newsNum:Number;
// LOAD XML //
// ======== //
var xml:XMLLoader = new XMLLoader(this,"data.xml");
// function called when XML is loaded
function getXML(xmlData:XML):void {
// STORING RELEVANT DATA INTO LISTS FOR LATER ACCESS //
newsTitle = xmlData.news.article.title;
newsInfo = xmlData.news.article.info;
newsContent = xmlData.news.article.content;
newsNum = newsTitle.length();
    newsTitleArray = xmlData.news.article.title.text().toXMLString().split("\n") ;
newsTitleArray.reverse();
newsInfoArray = xmlData.news.article.info.text().toXMLString().split("\n") ;
newsInfoArray.reverse();
newsContentArray = xmlData.news.article.content.text().toXMLString().split("\n") ;
newsContentArray.reverse();
In the folder i have uploaded to my server, i have following:
- AC_RunActiveContent.js - Background.png (main background) - com (folder) (GreenSock) - data.xml - index.html - js (folder) (SWFAddress) - mailer.php (Contact Form) - main.fla - main.swf - media (folder) (Pictures For Background) - Mosaic.swf (Mosaic Overlay For Background) - P-Logo.png - preview.swf (Background) - SWFAddress.as - SWFAddressEvent.as - textLayout_1.0.0.595.swz - xml (folder) (xml config for background) (SEPERATE FLA FILE (NOT A PROBLEM) - XMLLoader.as
The XMLLoader.as is the file that loads my data.xml. The data.xml has the text to my news section.
XMLLoader.as:
package {
import flash.events.IOErrorEvent;
import flash.net.URLLoader;
import flash.net.URLRequest;
import flash.events.Event;
import flash.display.Sprite;
import flash.display.MovieClip;
public class XMLLoader extends Sprite {
private var loader:URLLoader = new URLLoader();
public var loadedXML:XML;
// accept parent path to xml
public function XMLLoader(mT:MovieClip, path:String):void {
// LOADING XML //
// =========== //
loader.load(new URLRequest(path));
loader.addEventListener(Event.COMPLETE, onComplete, false, 0, true);
loader.addEventListener(IOErrorEvent.IO_ERROR, onIOError, false, 0, true);
function onComplete(evt:Event):void {
loadedXML = new XML(evt.target.data);
loader.removeEventListener(Event.COMPLETE, onComplete);
loader.removeEventListener(IOErrorEvent.IO_ERROR, onIOError);
// Run getXML function from where this clas was instantiated
mT.getXML(loadedXML);
function onIOError(evt:IOErrorEvent):void {
trace("Error: " + evt.text);
I hope this helps you? I hope you now can give me more specific help?

Almost no sound in flash

Hi
I've spend the last couple of days, almost nonstop searching the web for a solution for this. Tryed possible solution i found, but no luck so far.
I got perfect sound in any application, game, media player etc. But neither in internet explorer nor firefox when viewing online videos (youtube, xfire etc) do i get much sound.
At first i thought there was no sound at all, but when i crank up the speaker system to max i can hear a little (but if i do anything else with sound i get blasted away).
I've tryed registy fixes, checking if files where there, installing K-lite codec pack to fix regestry issues, uninstalled flash lots of times, rebooted before reinstalling, clearing temp internet files folder etc. Nothing helps.
I got the feeling that some stupid website somehow has changed a setting somewhere for flash, making sound almost unhearable, but i dunno how i can fix this.
As said, i searched and tryed all, but im lost now.
win xp pro (auto updating)
firefox (auto updating)
ie (guess its uptodate from windows updates, only use it if something doesnt work in FF)
onboard realtek hd sound card.
but as said, everywhere else its fine, just not playing sound in flash based videos.
noticed this first like 3-4 weeks ago, but figuered the videos i tryed to watch where broken or had no sound. Now i know its just my flash that has no volume set somehow.
oh, ofcourse i checked everysingle soundcard volume controler and mute box already.
any help will be appriciated.
- Bohs

since noone here cares, i've been trying everything in my powers to get this solved, and i might be a step closer, yet very far away, as i can not fix whats wrong.
What seems to be wrong is the DirectSound, atleast when i enter dxdiag and test sound there, its extremly silent too, i tryed changing all acceleration features to see if that helps, both in dxdiag and my sound options, that only makes everything worse.
however my DirectMusic works fine in normal volume.
But since microsoft is so ****** up on "there stuff", i can not even uninstall and reinstall directx .. i found two fixes on the net that should do this and thereby reinstall whatever is default with XP, but they just totally fock up your system, and you cant do anything without system restore. You can not even choose it from the XP installation cd ...
i got the latest (9.0c 4.09.0000.0904) version, so i can not update it with a newer ... how do i fix this? its just weird to me that no other application nor game is affected by this - only flash - they all use directx (well Prototype is a little affected, but that seems to be a game problem according to there forums http://forums.activision.com/viewtopic.php?f=54&t=1788 ).
and please dont tell me to update my audio drivers, cause there aint any newer aviable, and i have tryed reinstalling them several times.

Sometimes no sound in flash videos after boot?

Sometimes after I boot up the machine, I get no sound in flash videos. First I didn't know why it was happening, but as I read a few articles here on forum, I found out it was because of my USB webcam (logitech) - alsa was messing something up and didn't know how to handle sound drivers well (so they say). So one of the suggestions I found was to force the (in my case) snd_hda_intel module load before snd_usb_audio module during the boot process. I thought it worked, but after a while the same problem appeared again. If I just unplug the webcam from my computer, sound works perfectly on each boot, but I don't want to get down and insart the cam everytime I need it... Anyone have any suggestions what I should try to fix this? If I need to provide more information - please tell, and I'll provide it, just say which and how.
thanks

Oh God, this again.
Alright you're a newbie, but there is a SEARCH button. Read these, and then post something useful:
http://bbs.archlinux.org/viewtopic.php?id=91908
http://bbs.archlinux.org/viewtopic.php?id=89445
http://bbs.archlinux.org/viewtopic.php?id=62266

No Sound in Flash Player for PC

I have a PC and I have a problem with Flash Player 8. When I
visit web sites that use Flash Player there isn't any sound. I've
tried running the K-Lite Codec Pack, but that doesn't work. Could
someone help me please?

HI GUYS I HAD LOTSA MESSING WITH NO SOUND IN FLASH PLAYER 10.VIDEO AT FIRST THEN NOTHIN AT ALL.
THEN AFTER UNINSTALLING AND THEN RE INSTALLING ,ICHECKED AGAIN ,YET AGAIN NO VODEO /OR SOUND. I THEN WENT TO TOOL BAR,CLICKED ON TOOL OPTION AND CHECKED THAT FLASH PLAYER WAS ENABLED ,BELIEVE IT IT WAS NOT. I ENABLED FLAS PLAYER THEN WENT BACK ON YOU TUBE AND WOW __EE THERE IT WAS WORKING LIKE A REAL GOOD ONE
                                                HOPE THIS SOLVES YOUR PROBLEM IT DID FOR ME
                                                                              BEST OF LUCK GUYS
                                                                                                 EXCALIBUR

No sound in flash videos

I would like to say that I am not a native speaker and English is my second language.
Well, back to the topic. Sometimes safari stop playing sounds in flash videos. Its annoying because the only solution I found is to quit safari, start garage band, quit garage band and start safari again. After some research I found out that there is something wrong with sound frequency in preferences. Is there a permanent solution for this?

MIDI setup is set correct.
I did restart my computer. I know how to fix the issue. But I am sick of neverending Garage Band solving. Is there any pernament solution?

No sound in flash. Sound working otherwise.

Hey all, suilenroc here. With the recent advent of some high-quality Creative Drivers for my X-Fi card, I've been able to enjoy some great audio from my Exaile media player. However, sound from flash in firefox is still not forthcoming. Does anyone know how to fix this? And does anyone know how to install flash-10? For some reason, I just can't figure out how to uninstall flash 9 and install the latest version.
Thanks! -suilenroc

Okay, let's switch this up. Suilenroc's brother here. For the sake of convenience, just call me Suilenroc.
So I've been using Linux for about a year now, I used to use Gentoo and moved to Arch. My bro got a creative X-Fi card a while back when we was on windows, and now switched full time to Linux because of the new sound drivers. What I just can't figure out though, if how to get the sound working on his firefox installation. I don't know whether it's a firefox issue or a flash issue, specifically.
I've install the x-fi drivers, and am using ALSA for them, obviously. My brother doesn't know which VERSION of Arch he's using, x86 or x86_64, but it is, most definitely, arch.
Now, I don't, myself, remember the pacman command for installing flash 10 either, and I can't seem to find it via google. From what my brother told me, he installed nspluginwrapper and nspluginwrapper-flash, and linked it to his firefox by following a tutorial. This got flash VIDEO to work, but the audio is not being output through the x-fi card or the x-fi drivers.
Sorry for the earlier posts, I'll be taking over on this issue from here. (I've told the little guy to not get me involved unless he absolutely cannot figure the problem out himself. Well, now's one of those times. Thanks for bearing with him earlier, you can deal with me now. I know a bit more than he does when it comes to Linux.)
Last edited by suilenroc (2008-11-17 00:26:19)

[SOLVED]No more sound in flash, but kmix shows a stream

Similar Messages

Maybe you are looking for