[SOLVED]No net after upgrade to kernel 2.6.20.4, iptables related

Hi,
compiled and installed 2.6.20.4 today (from 2.6.19.4). After rebooting the computer I cant access the internet without disabling the firewall! I'm using firestarter, it gives these errors on boot
:: Starting Firestarter firewall [BUSY]
iptables: Invalid argument
iptables: Invalid argument
iptables: Invalid argument
iptables: Invalid argument
iptables: Invalid argument
iptables: Invalid argument
Firewall started [DONE]
something has probably changed in the kernel. Isnt anyone else having these problems? How can I fix this?
Thanks for all help..
edit: I solved it, I had used my old .config from 2.6.19 and didnt bother checking if something had changed... I had missed ipv4  connection tracking and that was causing my problems...
Last edited by con (2007-03-24 19:46:08)

Ok, I need some help here. My ssoundcard is an intel ac97 (i810) , module snd-intel8x0. Here are my configurations:
lsmod | grep snd
snd_seq_oss 33408 0
snd_seq_midi_event 6400 1 snd_seq_oss
snd_seq 51984 4 snd_seq_oss,snd_seq_midi_event
snd_seq_device 7436 2 snd_seq_oss,snd_seq
snd_pcm_oss 50848 0
snd_mixer_oss 17920 1 snd_pcm_oss
snd_intel8x0 30620 0
snd_ac97_codec 95136 1 snd_intel8x0
snd_ac97_bus 2176 1 snd_ac97_codec
snd_pcm 84100 3 snd_pcm_oss,snd_intel8x0,snd_ac97_codec
snd_timer 22148 2 snd_seq,snd_pcm
snd 49124 9 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer
soundcore 8160 1 snd
snd_page_alloc 8840 2 snd_intel8x0,snd_pcm
/etc/modprobe.conf
# OSS Compatibility
#install snd-pcm modprobe -i snd-pcm ; modprobe snd-pcm-oss ; true
#install snd-seq modprobe -i snd-seq ; modprobe snd-seq-oss ; true
# --- BEGIN: Generated by ALSACONF, do not edit. ---
# --- ALSACONF version 1.0.10 ---
alias snd-card-0 snd-intel8x0
alias sound-slot-0 snd-intel8x0
# --- END: Generated by ALSACONF, do not edit. ---
/etc/rc.conf
MOD_AUTOLOAD="yes"
MODULES=(usbserial nvidia snd-intel8x0 snd-pcm-oss)
DAEMONS=(syslog-ng !hotplug !pcmcia network netfs crond nvidia cups samba xinetd alsa)
The mixer settings are unmutted. But still, no sound
What am I doing wrong?

Similar Messages

  • Tvtime not working after upgrading to kernel-2.6.31-1 (Solved)

    Hello friends,
    When I am using kernel-2.6.30.8 it was everything ok with my system. tvtime has been working with least cpu utilization then. But after upgrading to kernel-2.6.31-1 I got following error messages when trying to open tvtime
    damu@station210 ~]$ tvtime
    Running tvtime 1.0.2.
    Reading configuration from /etc/tvtime/tvtime.xml
    Reading configuration from /home/damu/.tvtime/tvtime.xml
    xvoutput: No XVIDEO port found which supports YUY2 images.
    *** tvtime requires hardware YUY2 overlay support from your video card
    *** driver. If you are using an older NVIDIA card (TNT2), then
    *** this capability is only available with their binary drivers.
    *** For some ATI cards, this feature may be found in the experimental
    *** GATOS drivers: http://gatos.souceforge.net/
    *** If unsure, please check with your distribution to see if your
    *** X driver supports hardware overlay surfaces.
    What happened to driver and kernel? any way to go back to previous kernel version?
    Requesting help! Thanks
    Last edited by mvdvarrier (2009-10-14 06:26:14)

    Perry3D wrote:
    Are you using the xf86-video-ati/radeonhd driver?
    Try disabling KMS by appending nomodeset to the kernel parameters. At the moment kms ist not usable without upgrading some libs (mesa?, libdrm?). Search the forums for kms to get more information.
    Thanks Perry3D
    I disabled KMS as per http://wiki.archlinux.org/index.php/ATI. Now tvtime is working great. With the release of kernel 2.6.32 KMS can be enabled for ati card with radeon3200 chips
    mvdvarrier

  • My Arch is very slow after upgrading to kernel 3.0

    Hi men! This is my first post on this forum, i'm italian and i'm using archlinux since 4 months (sorry if my english is bad)...  I would like you to help me to solve a problem: as i wrote in object  my system has became very slow after upgrading to kernel 3.0: system booting, applications launch, general responses of my tasks....what's the problem? How can i resolve it? Thanks!!

    However the kernel26-lts looks slower than 3.0 so i returned to the last one...iìm going to see dmesg outputs...i've to remove "quiet" from the grub.cfg
    EDIT: I've checked but no error is shown....this is dmesg.log:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 (GCC) ) #1 SMP PREEMPT Tue Aug 16 08:44:20 CEST 2011
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009e800 (usable)
    [ 0.000000] BIOS-e820: 000000000009e800 - 00000000000a0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000dee74000 (usable)
    [ 0.000000] BIOS-e820: 00000000dee74000 - 00000000deebc000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deebc000 - 00000000deecd000 (reserved)
    [ 0.000000] BIOS-e820: 00000000deecd000 - 00000000deedf000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deedf000 - 00000000deee0000 (reserved)
    [ 0.000000] BIOS-e820: 00000000deee0000 - 00000000deee3000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000deee3000 - 00000000def11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def11000 - 00000000def12000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def12000 - 00000000def15000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def15000 - 00000000def17000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def17000 - 00000000def1b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def1b000 - 00000000def1e000 (ACPI data)
    [ 0.000000] BIOS-e820: 00000000def1e000 - 00000000def22000 (reserved)
    [ 0.000000] BIOS-e820: 00000000def22000 - 00000000def31000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000def31000 - 00000000e0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000f8000000 - 00000000fc000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed14000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed18000 - 00000000fed1a000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffa00000 - 00000000ffc00000 (reserved)
    [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100000000 - 0000000118000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: Sony Corporation VPCEC1M1E/VAIO, BIOS R0300Y8 07/20/2010
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x118000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F80000000 write-back
    [ 0.000000] 1 base 080000000 mask FC0000000 write-back
    [ 0.000000] 2 base 0C0000000 mask FE0000000 write-back
    [ 0.000000] 3 base 100000000 mask FE0000000 write-back
    [ 0.000000] 4 base 118000000 mask FF8000000 uncachable
    [ 0.000000] 5 base 0FFE00000 mask FFFE00000 write-protect
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] last_pfn = 0xdee74 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fc980] fc980
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000dee74000
    [ 0.000000] 0000000000 - 00dee00000 page 2M
    [ 0.000000] 00dee00000 - 00dee74000 page 4k
    [ 0.000000] kernel direct mapping tables up to dee74000 @ dee6e000-dee74000
    [ 0.000000] init_memory_mapping: 0000000100000000-0000000118000000
    [ 0.000000] 0100000000 - 0118000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 118000000 @ 117ffa000-118000000
    [ 0.000000] RAMDISK: 37c76000 - 37e33000
    [ 0.000000] ACPI: RSDP 00000000000f0410 00024 (v02 Sony)
    [ 0.000000] ACPI: XSDT 00000000def1ce18 0005C (v01 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI: FACP 00000000def15d98 000F4 (v04 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI Warning: 32/64 FACS address mismatch in FADT - two FACS tables! (20110413/tbfadt-369)
    [ 0.000000] ACPI Warning: 32/64X FACS address mismatch in FADT - 0xDEF2DF40/0x00000000DEF30D40, using 32 (20110413/tbfadt-489)
    [ 0.000000] ACPI: DSDT 00000000deecd018 0ADBB (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000def2df40 00040
    [ 0.000000] ACPI: APIC 00000000def1bf18 0008C (v02 Sony VAIO 20100720 MSFT 00010013)
    [ 0.000000] ACPI: MCFG 00000000def2fd18 0003C (v01 Sony VAIO 20100720 MSFT 00000097)
    [ 0.000000] ACPI: HPET 00000000def2fc98 00038 (v01 Sony VAIO 20100720 MSFT 00000003)
    [ 0.000000] ACPI: SLIC 00000000def28a18 00176 (v01 Sony VAIO 20100720 Sony 01000000)
    [ 0.000000] ACPI: SSDT 00000000def16018 009F1 (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: SSDT 00000000def15c18 0014B (v01 Sony VAIO 20100720 INTL 20051117)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-0000000118000000
    [ 0.000000] Initmem setup node 0 0000000000000000-0000000118000000
    [ 0.000000] NODE_DATA [0000000117ffb000 - 0000000117ffffff]
    [ 0.000000] [ffffea0000000000-ffffea0003dfffff] PMD -> [ffff880113800000-ffff880116ffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x00118000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[3] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x0000009e
    [ 0.000000] 0: 0x00000100 -> 0x000dee74
    [ 0.000000] 0: 0x00100000 -> 0x00118000
    [ 0.000000] On node 0 totalpages: 1011202
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 5 pages reserved
    [ 0.000000] DMA zone: 3921 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 894636 pages, LIFO batch:31
    [ 0.000000] Normal zone: 1344 pages used for memmap
    [ 0.000000] Normal zone: 96960 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x05] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] disabled)
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009e000 - 000000000009f000
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
    [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000dee74000 - 00000000deebc000
    [ 0.000000] PM: Registered nosave memory: 00000000deebc000 - 00000000deecd000
    [ 0.000000] PM: Registered nosave memory: 00000000deecd000 - 00000000deedf000
    [ 0.000000] PM: Registered nosave memory: 00000000deedf000 - 00000000deee0000
    [ 0.000000] PM: Registered nosave memory: 00000000deee0000 - 00000000deee3000
    [ 0.000000] PM: Registered nosave memory: 00000000deee3000 - 00000000def11000
    [ 0.000000] PM: Registered nosave memory: 00000000def11000 - 00000000def12000
    [ 0.000000] PM: Registered nosave memory: 00000000def12000 - 00000000def15000
    [ 0.000000] PM: Registered nosave memory: 00000000def15000 - 00000000def17000
    [ 0.000000] PM: Registered nosave memory: 00000000def17000 - 00000000def1b000
    [ 0.000000] PM: Registered nosave memory: 00000000def1b000 - 00000000def1e000
    [ 0.000000] PM: Registered nosave memory: 00000000def1e000 - 00000000def22000
    [ 0.000000] PM: Registered nosave memory: 00000000def22000 - 00000000def31000
    [ 0.000000] PM: Registered nosave memory: 00000000def31000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f8000000
    [ 0.000000] PM: Registered nosave memory: 00000000f8000000 - 00000000fc000000
    [ 0.000000] PM: Registered nosave memory: 00000000fc000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
    [ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed14000
    [ 0.000000] PM: Registered nosave memory: 00000000fed14000 - 00000000fed18000
    [ 0.000000] PM: Registered nosave memory: 00000000fed18000 - 00000000fed1a000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
    [ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
    [ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
    [ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
    [ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffa00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffa00000 - 00000000ffc00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffc00000 - 00000000ffe00000
    [ 0.000000] PM: Registered nosave memory: 00000000ffe00000 - 0000000100000000
    [ 0.000000] Allocating PCI resources starting at e0000000 (gap: e0000000:18000000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff880117c00000 s78464 r8192 d23936 u262144
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 995517
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=/dev/disk/by-uuid/ea679d77-65a5-4cc3-b46e-286b953789f7 resume=/dev/sda9 ro vga=0x3f0 nomodeset
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3909052k/4587520k available (4064k kernel code, 542712k absent, 135756k reserved, 3304k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 32505856 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.003333] spurious 8259A interrupt: IRQ7.
    [ 0.003333] Detected 2127.784 MHz processor.
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 4257.88 BogoMIPS (lpj=7092613)
    [ 0.000008] pid_max: default: 32768 minimum: 301
    [ 0.000120] Security Framework initialized
    [ 0.000125] AppArmor: AppArmor disabled by boot time parameter
    [ 0.000524] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.001546] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.001968] Mount-cache hash table entries: 256
    [ 0.002354] Initializing cgroup subsys cpuacct
    [ 0.002387] Initializing cgroup subsys memory
    [ 0.002403] Initializing cgroup subsys devices
    [ 0.002406] Initializing cgroup subsys freezer
    [ 0.002408] Initializing cgroup subsys net_cls
    [ 0.002410] Initializing cgroup subsys blkio
    [ 0.002461] CPU: Physical Processor ID: 0
    [ 0.002462] CPU: Processor Core ID: 0
    [ 0.002468] mce: CPU supports 9 MCE banks
    [ 0.002478] CPU0: Thermal monitoring handled by SMI
    [ 0.002487] using mwait in idle threads.
    [ 0.003640] ACPI: Core revision 20110413
    [ 0.019108] ftrace: allocating 16144 entries in 64 pages
    [ 0.025543] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=0 pin2=0
    [ 0.058531] CPU0: Intel(R) Core(TM) i3 CPU M 330 @ 2.13GHz stepping 02
    [ 0.163154] Performance Events: PEBS fmt1+, Westmere events, Intel PMU driver.
    [ 0.163161] ... version: 3
    [ 0.163162] ... bit width: 48
    [ 0.163164] ... generic registers: 4
    [ 0.163165] ... value mask: 0000ffffffffffff
    [ 0.163167] ... max period: 000000007fffffff
    [ 0.163168] ... fixed-purpose events: 3
    [ 0.163169] ... event mask: 000000070000000f
    [ 0.183294] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.209823] Booting Node 0, Processors #1
    [ 0.209829] smpboot cpu 1: start_ip = 99000
    [ 0.303122] CPU1: Thermal monitoring handled by SMI
    [ 0.323240] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.343129] #2
    [ 0.343133] smpboot cpu 2: start_ip = 99000
    [ 0.436405] CPU2: Thermal monitoring handled by SMI
    [ 0.456532] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.476405] #3
    [ 0.476409] smpboot cpu 3: start_ip = 99000
    [ 0.569682] CPU3: Thermal monitoring handled by SMI
    [ 0.589820] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.596326] Brought up 4 CPUs
    [ 0.596331] Total of 4 processors activated (17030.31 BogoMIPS).
    [ 0.598893] devtmpfs: initialized
    [ 0.600028] PM: Registering ACPI NVS region at dee74000 (294912 bytes)
    [ 0.600036] PM: Registering ACPI NVS region at deecd000 (73728 bytes)
    [ 0.600039] PM: Registering ACPI NVS region at deee0000 (12288 bytes)
    [ 0.600041] PM: Registering ACPI NVS region at def11000 (4096 bytes)
    [ 0.600042] PM: Registering ACPI NVS region at def15000 (8192 bytes)
    [ 0.600044] PM: Registering ACPI NVS region at def22000 (61440 bytes)
    [ 0.600970] print_constraints: dummy:
    [ 0.601050] NET: Registered protocol family 16
    [ 0.601156] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.601159] ACPI: bus type pci registered
    [ 0.601319] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.601322] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.613921] PCI: Using configuration type 1 for base access
    [ 0.614412] bio: create slab <bio-0> at 0
    [ 0.616187] ACPI: EC: Look up EC in DSDT
    [ 0.626457] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.646350] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.646723] ACPI: SSDT 00000000def1ac18 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.647118] ACPI: Dynamic OEM Table Load:
    [ 0.647121] ACPI: SSDT (null) 003AE (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
    [ 0.647269] ACPI: SSDT 00000000def18018 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.647646] ACPI: Dynamic OEM Table Load:
    [ 0.647648] ACPI: SSDT (null) 00891 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
    [ 0.666577] ACPI: SSDT 00000000def19a98 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.667016] ACPI: Dynamic OEM Table Load:
    [ 0.667018] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20051117)
    [ 0.676431] ACPI: SSDT 00000000def17d98 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 0.676844] ACPI: Dynamic OEM Table Load:
    [ 0.676846] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20051117)
    [ 1.089727] ACPI: Interpreter enabled
    [ 1.089731] ACPI: (supports S0 S3 S4 S5)
    [ 1.089754] ACPI: Using IOAPIC for interrupt routing
    [ 1.120583] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 1.120814] ACPI: No dock devices found.
    [ 1.120815] HEST: Table not found.
    [ 1.120818] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 1.121147] \_SB_.PCI0:_OSC invalid UUID
    [ 1.121149] _OSC request data:1 8 1f
    [ 1.121153] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 1.121658] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 1.121661] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 1.121663] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 1.121666] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
    [ 1.121668] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
    [ 1.121670] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
    [ 1.121672] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
    [ 1.121675] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
    [ 1.121677] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
    [ 1.121679] pci_root PNP0A08:00: host bridge window [mem 0xe0000000-0xfeafffff]
    [ 1.121692] pci 0000:00:00.0: [8086:0044] type 0 class 0x000600
    [ 1.121712] DMAR: BIOS has allocated no shadow GTT; disabling IOMMU for graphics
    [ 1.121730] pci 0000:00:01.0: [8086:0045] type 1 class 0x000604
    [ 1.121757] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 1.121761] pci 0000:00:01.0: PME# disabled
    [ 1.121809] pci 0000:00:16.0: [8086:3b64] type 0 class 0x000780
    [ 1.121841] pci 0000:00:16.0: reg 10: [mem 0xf5e0a000-0xf5e0a00f 64bit]
    [ 1.121922] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 1.121927] pci 0000:00:16.0: PME# disabled
    [ 1.121966] pci 0000:00:1a.0: [8086:3b3c] type 0 class 0x000c03
    [ 1.121992] pci 0000:00:1a.0: reg 10: [mem 0xf5e08000-0xf5e083ff]
    [ 1.122083] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 1.122088] pci 0000:00:1a.0: PME# disabled
    [ 1.122118] pci 0000:00:1b.0: [8086:3b56] type 0 class 0x000403
    [ 1.122140] pci 0000:00:1b.0: reg 10: [mem 0xf5e00000-0xf5e03fff 64bit]
    [ 1.122219] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 1.122223] pci 0000:00:1b.0: PME# disabled
    [ 1.122251] pci 0000:00:1c.0: [8086:3b42] type 1 class 0x000604
    [ 1.122332] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 1.122337] pci 0000:00:1c.0: PME# disabled
    [ 1.122366] pci 0000:00:1c.1: [8086:3b44] type 1 class 0x000604
    [ 1.122446] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 1.122451] pci 0000:00:1c.1: PME# disabled
    [ 1.122480] pci 0000:00:1c.2: [8086:3b46] type 1 class 0x000604
    [ 1.122560] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 1.122565] pci 0000:00:1c.2: PME# disabled
    [ 1.122598] pci 0000:00:1c.5: [8086:3b4c] type 1 class 0x000604
    [ 1.122681] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 1.122686] pci 0000:00:1c.5: PME# disabled
    [ 1.122723] pci 0000:00:1d.0: [8086:3b34] type 0 class 0x000c03
    [ 1.122749] pci 0000:00:1d.0: reg 10: [mem 0xf5e07000-0xf5e073ff]
    [ 1.122839] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 1.122844] pci 0000:00:1d.0: PME# disabled
    [ 1.122869] pci 0000:00:1e.0: [8086:2448] type 1 class 0x000604
    [ 1.122953] pci 0000:00:1f.0: [8086:3b09] type 0 class 0x000601
    [ 1.123075] pci 0000:00:1f.2: [8086:3b29] type 0 class 0x000106
    [ 1.123103] pci 0000:00:1f.2: reg 10: [io 0xe070-0xe077]
    [ 1.123114] pci 0000:00:1f.2: reg 14: [io 0xe060-0xe063]
    [ 1.123126] pci 0000:00:1f.2: reg 18: [io 0xe050-0xe057]
    [ 1.123137] pci 0000:00:1f.2: reg 1c: [io 0xe040-0xe043]
    [ 1.123149] pci 0000:00:1f.2: reg 20: [io 0xe020-0xe03f]
    [ 1.123161] pci 0000:00:1f.2: reg 24: [mem 0xf5e06000-0xf5e067ff]
    [ 1.123209] pci 0000:00:1f.2: PME# supported from D3hot
    [ 1.123214] pci 0000:00:1f.2: PME# disabled
    [ 1.123237] pci 0000:00:1f.3: [8086:3b30] type 0 class 0x000c05
    [ 1.123259] pci 0000:00:1f.3: reg 10: [mem 0xf5e05000-0xf5e050ff 64bit]
    [ 1.123290] pci 0000:00:1f.3: reg 20: [io 0xe000-0xe01f]
    [ 1.123360] pci 0000:01:00.0: [1002:68e0] type 0 class 0x000300
    [ 1.123380] pci 0000:01:00.0: reg 10: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 1.123394] pci 0000:01:00.0: reg 18: [mem 0xf0020000-0xf003ffff 64bit]
    [ 1.123405] pci 0000:01:00.0: reg 20: [io 0xd000-0xd0ff]
    [ 1.123424] pci 0000:01:00.0: reg 30: [mem 0xf0000000-0xf001ffff pref]
    [ 1.123443] pci 0000:01:00.0: supports D1 D2
    [ 1.123468] pci 0000:01:00.1: [1002:aa68] type 0 class 0x000403
    [ 1.123487] pci 0000:01:00.1: reg 10: [mem 0xf0040000-0xf0043fff 64bit]
    [ 1.123555] pci 0000:01:00.1: supports D1 D2
    [ 1.123579] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.123582] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.123585] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
    [ 1.123589] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.123667] pci 0000:02:00.0: [168c:002b] type 0 class 0x000280
    [ 1.123693] pci 0000:02:00.0: reg 10: [mem 0xf4a00000-0xf4a0ffff 64bit]
    [ 1.123783] pci 0000:02:00.0: supports D1
    [ 1.123785] pci 0000:02:00.0: PME# supported from D0 D1 D3hot D3cold
    [ 1.123790] pci 0000:02:00.0: PME# disabled
    [ 1.123824] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.123829] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.123834] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
    [ 1.123842] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.123953] pci 0000:03:00.0: [1180:e822] type 0 class 0x000805
    [ 1.123976] pci 0000:03:00.0: reg 10: [mem 0xf3602000-0xf36020ff]
    [ 1.124115] pci 0000:03:00.0: supports D1 D2
    [ 1.124117] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124123] pci 0000:03:00.0: PME# disabled
    [ 1.124175] pci 0000:03:00.1: [1180:e230] type 0 class 0x000880
    [ 1.124198] pci 0000:03:00.1: reg 10: [mem 0xf3601000-0xf36010ff]
    [ 1.124336] pci 0000:03:00.1: supports D1 D2
    [ 1.124338] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124344] pci 0000:03:00.1: PME# disabled
    [ 1.124394] pci 0000:03:00.4: [1180:e822] type 0 class 0x000805
    [ 1.124418] pci 0000:03:00.4: reg 10: [mem 0xf3600000-0xf36000ff]
    [ 1.124554] pci 0000:03:00.4: supports D1 D2
    [ 1.124556] pci 0000:03:00.4: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.124562] pci 0000:03:00.4: PME# disabled
    [ 1.124630] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.124635] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.124640] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
    [ 1.124648] pci 0000:00:1c.1: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.124886] pci 0000:04:00.0: [11ab:4381] type 0 class 0x000200
    [ 1.125105] pci 0000:04:00.0: reg 10: [mem 0xf2220000-0xf2223fff 64bit]
    [ 1.125212] pci 0000:04:00.0: reg 18: [io 0xa000-0xa0ff]
    [ 1.125642] pci 0000:04:00.0: reg 30: [mem 0xf2200000-0xf221ffff pref]
    [ 1.125967] pci 0000:04:00.0: supports D1 D2
    [ 1.125968] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 1.126008] pci 0000:04:00.0: PME# disabled
    [ 1.126269] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 1.126274] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    [ 1.126279] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
    [ 1.126287] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126344] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
    [ 1.126348] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.126353] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
    [ 1.126361] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126438] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d] (subtractive decode)
    [ 1.126443] pci 0000:00:1e.0: bridge window [io 0xf000-0x0000] (disabled)
    [ 1.126448] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 1.126456] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 1.126459] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 1.126461] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 1.126463] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 1.126466] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
    [ 1.126468] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 1.126470] pci 0000:00:1e.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
    [ 1.126473] pci 0000:00:1e.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
    [ 1.126475] pci 0000:00:1e.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
    [ 1.126478] pci 0000:00:1e.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
    [ 1.126480] pci 0000:00:1e.0: bridge window [mem 0xe0000000-0xfeafffff] (subtractive decode)
    [ 1.126515] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 1.126656] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 1.126708] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
    [ 1.126765] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 1.126833] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 1.126882] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
    [ 1.126997] \_SB_.PCI0:_OSC invalid UUID
    [ 1.126998] _OSC request data:1 1f 1f
    [ 1.127003] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 1.127035] \_SB_.PCI0:_OSC invalid UUID
    [ 1.127037] _OSC request data:1 0 1d
    [ 1.127041] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
    [ 1.127042] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.130982] ACPI: PCI Root Bridge [CPBG] (domain 0000 [bus 3f])
    [ 1.131046] pci 0000:3f:00.0: [8086:2c62] type 0 class 0x000600
    [ 1.131066] pci 0000:3f:00.1: [8086:2d01] type 0 class 0x000600
    [ 1.131087] pci 0000:3f:02.0: [8086:2d10] type 0 class 0x000600
    [ 1.131107] pci 0000:3f:02.1: [8086:2d11] type 0 class 0x000600
    [ 1.131125] pci 0000:3f:02.2: [8086:2d12] type 0 class 0x000600
    [ 1.131143] pci 0000:3f:02.3: [8086:2d13] type 0 class 0x000600
    [ 1.131176] pci0000:3f: Requesting ACPI _OSC control (0x1d)
    [ 1.131179] pci0000:3f: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 1.131181] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 1.131415] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 1.131460] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 1.131503] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 *4 5 6 7 10 12 14 15)
    [ 1.131546] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 *5 6 7 11 12 14 15)
    [ 1.131588] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 1.131636] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
    [ 1.131679] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 *3 4 5 6 7 10 12 14 15)
    [ 1.131722] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 *11 12 14 15)
    [ 1.131820] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    [ 1.131826] vgaarb: loaded
    [ 1.131827] vgaarb: bridge control possible 0000:01:00.0
    [ 1.131900] PCI: Using ACPI for IRQ routing
    [ 1.134142] PCI: pci_cache_line_size set to 64 bytes
    [ 1.134246] reserve RAM buffer: 000000000009e800 - 000000000009ffff
    [ 1.134248] reserve RAM buffer: 00000000dee74000 - 00000000dfffffff
    [ 1.134372] NetLabel: Initializing
    [ 1.134374] NetLabel: domain hash size = 128
    [ 1.134375] NetLabel: protocols = UNLABELED CIPSOv4
    [ 1.134389] NetLabel: unlabeled traffic allowed by default
    [ 1.134412] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 1.134418] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 1.136441] Switching to clocksource hpet
    [ 1.139456] Switched to NOHz mode on CPU #0
    [ 1.139583] Switched to NOHz mode on CPU #1
    [ 1.139590] Switched to NOHz mode on CPU #2
    [ 1.139598] Switched to NOHz mode on CPU #3
    [ 1.142357] pnp: PnP ACPI init
    [ 1.142375] ACPI: bus type pnp registered
    [ 1.142679] pnp 00:00: [bus 00-3e]
    [ 1.142682] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 1.142684] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 1.142686] pnp 00:00: [io 0x0d00-0xffff window]
    [ 1.142689] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 1.142691] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 1.142693] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 1.142695] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 1.142697] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 1.142699] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 1.142700] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 1.142702] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 1.142707] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 1.142709] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 1.142711] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 1.142713] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 1.142715] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 1.142716] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 1.142718] pnp 00:00: [mem 0xe0000000-0xfeafffff window]
    [ 1.142826] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 1.142841] pnp 00:01: [io 0x0000-0x001f]
    [ 1.142843] pnp 00:01: [io 0x0081-0x0091]
    [ 1.142844] pnp 00:01: [io 0x0093-0x009f]
    [ 1.142846] pnp 00:01: [io 0x00c0-0x00df]
    [ 1.142848] pnp 00:01: [dma 4]
    [ 1.142872] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 1.142880] pnp 00:02: [mem 0xff000000-0xffffffff]
    [ 1.142901] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 1.142976] pnp 00:03: [mem 0xfed00000-0xfed003ff]
    [ 1.142999] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 1.143008] pnp 00:04: [io 0x00f0]
    [ 1.143019] pnp 00:04: [irq 13]
    [ 1.143044] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 1.143054] pnp 00:05: [io 0x002e-0x002f]
    [ 1.143056] pnp 00:05: [io 0x004e-0x004f]
    [ 1.143057] pnp 00:05: [io 0x0061]
    [ 1.143059] pnp 00:05: [io 0x0063]
    [ 1.143061] pnp 00:05: [io 0x0065]
    [ 1.143062] pnp 00:05: [io 0x0067]
    [ 1.143064] pnp 00:05: [io 0x0070]
    [ 1.143065] pnp 00:05: [io 0x0080]
    [ 1.143066] pnp 00:05: [io 0x0092]
    [ 1.143068] pnp 00:05: [io 0x00b2-0x00b3]
    [ 1.143070] pnp 00:05: [io 0x0680-0x069f]
    [ 1.143072] pnp 00:05: [io 0xff00-0xff0f]
    [ 1.143073] pnp 00:05: [io 0xff10-0xff13]
    [ 1.143075] pnp 00:05: [io 0x0800-0x0803]
    [ 1.143076] pnp 00:05: [io 0x0400-0x047f]
    [ 1.143078] pnp 00:05: [io 0x0500-0x057f]
    [ 1.143080] pnp 00:05: [io 0x164e-0x164f]
    [ 1.143140] system 00:05: [io 0x0680-0x069f] has been reserved
    [ 1.143143] system 00:05: [io 0xff00-0xff0f] has been reserved
    [ 1.143145] system 00:05: [io 0xff10-0xff13] has been reserved
    [ 1.143148] system 00:05: [io 0x0800-0x0803] has been reserved
    [ 1.143150] system 00:05: [io 0x0400-0x047f] has been reserved
    [ 1.143152] system 00:05: [io 0x0500-0x057f] has been reserved
    [ 1.143154] system 00:05: [io 0x164e-0x164f] has been reserved
    [ 1.143157] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.143166] pnp 00:06: [io 0x0070-0x0077]
    [ 1.143171] pnp 00:06: [irq 8]
    [ 1.143208] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 1.143218] pnp 00:07: [io 0x0060]
    [ 1.143220] pnp 00:07: [io 0x0064]
    [ 1.143225] pnp 00:07: [irq 1]
    [ 1.143250] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 1.143262] pnp 00:08: [irq 12]
    [ 1.143288] pnp 00:08: Plug and Play ACPI device, IDs SNY9011 PNP0f13 (active)
    [ 1.143642] pnp 00:09: [mem 0xfed1c000-0xfed1ffff]
    [ 1.143644] pnp 00:09: [mem 0xfed10000-0xfed13fff]
    [ 1.143646] pnp 00:09: [mem 0xfed18000-0xfed18fff]
    [ 1.143650] pnp 00:09: [mem 0xfed19000-0xfed19fff]
    [ 1.143651] pnp 00:09: [mem 0xf8000000-0xfbffffff]
    [ 1.143653] pnp 00:09: [mem 0xfed20000-0xfed3ffff]
    [ 1.143655] pnp 00:09: [mem 0xfed90000-0xfed8ffff disabled]
    [ 1.143657] pnp 00:09: [mem 0xfed45000-0xfed8ffff]
    [ 1.143659] pnp 00:09: [mem 0xff000000-0xffffffff]
    [ 1.143661] pnp 00:09: [mem 0xfee00000-0xfeefffff]
    [ 1.143663] pnp 00:09: [mem 0xf5e0b000-0xf5e0bfff]
    [ 1.143733] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 1.143736] system 00:09: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 1.143739] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 1.143741] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 1.143744] system 00:09: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 1.143746] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 1.143749] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 1.143751] system 00:09: [mem 0xff000000-0xffffffff] could not be reserved
    [ 1.143754] system 00:09: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 1.143757] system 00:09: [mem 0xf5e0b000-0xf5e0bfff] has been reserved
    [ 1.143760] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 1.143900] pnp 00:0a: [bus 3f]
    [ 1.143951] pnp 00:0a: Plug and Play ACPI device, IDs PNP0a03 (active)
    [ 1.157077] pnp: PnP ACPI: found 11 devices
    [ 1.157079] ACPI: ACPI bus type pnp unregistered
    [ 1.163064] PCI: max bus depth: 1 pci_try_num: 2
    [ 1.163124] pci 0000:00:1c.5: BAR 15: assigned [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163130] pci 0000:00:1c.2: BAR 15: assigned [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163135] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163140] pci 0000:00:1c.0: BAR 15: assigned [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163143] pci 0000:00:01.0: PCI bridge to [bus 01-01]
    [ 1.163146] pci 0000:00:01.0: bridge window [io 0xd000-0xdfff]
    [ 1.163149] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf00fffff]
    [ 1.163152] pci 0000:00:01.0: bridge window [mem pref disabled]
    [ 1.163156] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
    [ 1.163159] pci 0000:00:1c.0: bridge window [io 0xc000-0xcfff]
    [ 1.163166] pci 0000:00:1c.0: bridge window [mem 0xf4a00000-0xf5dfffff]
    [ 1.163171] pci 0000:00:1c.0: bridge window [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163191] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
    [ 1.163195] pci 0000:00:1c.1: bridge window [io 0xb000-0xbfff]
    [ 1.163202] pci 0000:00:1c.1: bridge window [mem 0xf3600000-0xf49fffff]
    [ 1.163207] pci 0000:00:1c.1: bridge window [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163215] pci 0000:00:1c.2: PCI bridge to [bus 04-04]
    [ 1.163219] pci 0000:00:1c.2: bridge window [io 0xa000-0xafff]
    [ 1.163225] pci 0000:00:1c.2: bridge window [mem 0xf2200000-0xf35fffff]
    [ 1.163230] pci 0000:00:1c.2: bridge window [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163238] pci 0000:00:1c.5: PCI bridge to [bus 05-0c]
    [ 1.163242] pci 0000:00:1c.5: bridge window [io 0x9000-0x9fff]
    [ 1.163248] pci 0000:00:1c.5: bridge window [mem 0xf0200000-0xf21fffff]
    [ 1.163253] pci 0000:00:1c.5: bridge window [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163262] pci 0000:00:1e.0: PCI bridge to [bus 0d-0d]
    [ 1.163263] pci 0000:00:1e.0: bridge window [io disabled]
    [ 1.163269] pci 0000:00:1e.0: bridge window [mem disabled]
    [ 1.163274] pci 0000:00:1e.0: bridge window [mem pref disabled]
    [ 1.163293] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163296] pci 0000:00:01.0: setting latency timer to 64
    [ 1.163303] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 1.163308] pci 0000:00:1c.0: setting latency timer to 64
    [ 1.163318] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.163323] pci 0000:00:1c.1: setting latency timer to 64
    [ 1.163333] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 1.163338] pci 0000:00:1c.2: setting latency timer to 64
    [ 1.163345] pci 0000:00:1c.5: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 1.163350] pci 0000:00:1c.5: setting latency timer to 64
    [ 1.163359] pci 0000:00:1e.0: setting latency timer to 64
    [ 1.163363] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 1.163366] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 1.163368] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.163370] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.163372] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.163374] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.163376] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.163378] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.163380] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.163383] pci_bus 0000:00: resource 13 [mem 0xe0000000-0xfeafffff]
    [ 1.163385] pci_bus 0000:01: resource 0 [io 0xd000-0xdfff]
    [ 1.163387] pci_bus 0000:01: resource 1 [mem 0xe0000000-0xf00fffff]
    [ 1.163389] pci_bus 0000:02: resource 0 [io 0xc000-0xcfff]
    [ 1.163391] pci_bus 0000:02: resource 1 [mem 0xf4a00000-0xf5dfffff]
    [ 1.163394] pci_bus 0000:02: resource 2 [mem 0xf6500000-0xf66fffff 64bit pref]
    [ 1.163396] pci_bus 0000:03: resource 0 [io 0xb000-0xbfff]
    [ 1.163398] pci_bus 0000:03: resource 1 [mem 0xf3600000-0xf49fffff]
    [ 1.163400] pci_bus 0000:03: resource 2 [mem 0xf6300000-0xf64fffff 64bit pref]
    [ 1.163403] pci_bus 0000:04: resource 0 [io 0xa000-0xafff]
    [ 1.163405] pci_bus 0000:04: resource 1 [mem 0xf2200000-0xf35fffff]
    [ 1.163407] pci_bus 0000:04: resource 2 [mem 0xf6100000-0xf62fffff 64bit pref]
    [ 1.163409] pci_bus 0000:05: resource 0 [io 0x9000-0x9fff]
    [ 1.163411] pci_bus 0000:05: resource 1 [mem 0xf0200000-0xf21fffff]
    [ 1.163414] pci_bus 0000:05: resource 2 [mem 0xf5f00000-0xf60fffff 64bit pref]
    [ 1.163416] pci_bus 0000:0d: resource 4 [io 0x0000-0x0cf7]
    [ 1.163418] pci_bus 0000:0d: resource 5 [io 0x0d00-0xffff]
    [ 1.163420] pci_bus 0000:0d: resource 6 [mem 0x000a0000-0x000bffff]
    [ 1.163422] pci_bus 0000:0d: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 1.163424] pci_bus 0000:0d: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 1.163426] pci_bus 0000:0d: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 1.163428] pci_bus 0000:0d: resource 10 [mem 0x000dc000-0x000dffff]
    [ 1.163431] pci_bus 0000:0d: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 1.163433] pci_bus 0000:0d: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 1.163435] pci_bus 0000:0d: resource 13 [mem 0xe0000000-0xfeafffff]
    [ 1.163511] NET: Registered protocol family 2
    [ 1.163700] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 1.164727] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 1.167663] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 1.168014] TCP: Hash tables configured (established 524288 bind 65536)
    [ 1.168016] TCP reno registered
    [ 1.168027] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.168066] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 1.168344] NET: Registered protocol family 1
    [ 2.499376] pci 0000:00:1a.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 3.832221] pci 0000:00:1d.0: EHCI: BIOS handoff failed (BIOS bug?) 01010001
    [ 3.832352] pci 0000:01:00.0: Boot video device
    [ 3.832384] PCI: CLS 64 bytes, default 64
    [ 3.832433] Unpacking initramfs...
    [ 3.861003] Freeing initrd memory: 1780k freed
    [ 3.861298] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 3.861302] Placing 64MB software IO TLB between ffff8800dae6e000 - ffff8800dee6e000
    [ 3.861304] software IO TLB at phys 0xdae6e000 - 0xdee6e000
    [ 3.861787] audit: initializing netlink socket (disabled)
    [ 3.861799] type=2000 audit(1313594250.696:1): initialized
    [ 3.869728] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 3.886559] VFS: Disk quotas dquot_6.5.2
    [ 3.886700] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 3.886869] msgmni has been set to 7638
    [ 3.887107] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 3.887147] io scheduler noop registered
    [ 3.887150] io scheduler deadline registered
    [ 3.887202] io scheduler cfq registered (default)
    [ 3.887320] pcieport 0000:00:01.0: setting latency timer to 64
    [ 3.887348] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 3.887672] vesafb: mode is 1600x900x32, linelength=6400, pages=1
    [ 3.887674] vesafb: scrolling: redraw
    [ 3.887677] vesafb: Truecolor: size=0:8:8:8, shift=0:16:8:0
    [ 3.890141] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 11250k, total 16384k
    [ 4.087472] Console: switching to colour frame buffer device 200x56
    [ 4.281840] fb0: VESA VGA frame buffer device
    [ 4.281854] intel_idle: MWAIT substates: 0x1120
    [ 4.281856] intel_idle: v0.4 model 0x25
    [ 4.281857] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 4.281902] ERST: Table is not found!
    [ 4.281955] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 4.469026] Linux agpgart interface v0.103
    [ 4.469114] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 4.473482] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 4.473514] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 4.473591] mousedev: PS/2 mouse device common for all mice
    [ 4.473653] rtc_cmos 00:06: RTC can wake from S4
    [ 4.473761] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 4.473791] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
    [ 4.473886] cpuidle: using governor ladder
    [ 4.474031] cpuidle: using governor menu
    [ 4.474245] TCP cubic registered
    [ 4.474248] NET: Registered protocol family 17
    [ 4.474257] Registering the dns_resolver key type
    [ 4.474353] PM: Checking hibernation image partition /dev/sda9
    [ 4.496169] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 4.502184] PM: Hibernation image not present or could not be loaded.
    [ 4.502194] registered taskstats version 1
    [ 4.512403] rtc_cmos 00:06: setting system clock to 2011-08-17 15:17:31 UTC (1313594251)
    [ 4.512569] Initializing network drop monitor service
    [ 4.516031] Freeing unused kernel memory: 712k freed
    [ 4.516201] Write protecting the kernel read-only data: 6144k
    [ 4.516747] Freeing unused kernel memory: 12k freed
    [ 4.522858] Freeing unused kernel memory: 776k freed
    [ 4.564188] udevd[93]: starting version 173
    [ 4.566281] ACPI: acpi_idle yielding to intel_idle
    [ 4.624591] SCSI subsystem initialized
    [ 4.630767] libata version 3.00 loaded.
    [ 4.632419] ahci 0000:00:1f.2: version 3.0
    [ 4.632443] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    [ 4.632515] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
    [ 4.632554] ahci: SSS flag set, parallel bus scan disabled
    [ 4.632606] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 3 Gbps 0x33 impl SATA mode
    [ 4.632610] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pio slum part sxs apst
    [ 4.632616] ahci 0000:00:1f.2: setting latency timer to 64
    [ 4.634910] scsi0 : ahci
    [ 4.635536] scsi1 : ahci
    [ 4.636083] scsi2 : ahci
    [ 4.636721] scsi3 : ahci
    [ 4.637168] scsi4 : ahci
    [ 4.637475] scsi5 : ahci
    [ 4.637727] ata1: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06100 irq 41
    [ 4.637731] ata2: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06180 irq 41
    [ 4.637733] ata3: DUMMY
    [ 4.637734] ata4: DUMMY
    [ 4.637737] ata5: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06300 irq 41
    [ 4.637741] ata6: SATA max UDMA/133 abar m2048@0xf5e06000 port 0xf5e06380 irq 41
    [ 4.861932] Refined TSC clocksource calibration: 2128.123 MHz.
    [ 4.861939] Switching to clocksource tsc
    [ 4.955224] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 4.965120] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 4.965397] ata1.00: ATA-8: SAMSUNG HM500JI, 2AC101C4, max UDMA/133
    [ 4.965402] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 4.975403] ata1.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 4.975693] ata1.00: configured for UDMA/133
    [ 4.976014] scsi 0:0:0:0: Direct-Access ATA SAMSUNG HM500JI 2AC1 PQ: 0 ANSI: 5
    [ 5.295101] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 5.296935] ata2.00: ATAPI: Optiarc DVD RW AD-7700H, 1.V0, max UDMA/100
    [ 5.303748] ata2.00: configured for UDMA/100
    [ 5.319899] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-7700H 1.V0 PQ: 0 ANSI: 5
    [ 5.638306] ata5: SATA link down (SStatus 0 SControl 300)
    [ 5.958189] ata6: SATA link down (SStatus 0 SControl 300)
    [ 5.964558] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 5.964596] sd 0:0:0:0: [sda] Write Protect is off
    [ 5.964599] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 5.964614] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 6.073618] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 6.074200] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 6.091859] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 6.091865] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 6.092089] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 7.960526] EXT4-fs (sda7): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.667393] udevd[273]: starting version 173
    [ 10.439749] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 10.447052] ACPI: Lid Switch [LID0]
    [ 10.449942] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 10.449952] ACPI: Power Button [PWRB]
    [ 10.463109] [Firmware Bug]: ACPI(VGA) defines _DOD but not _DOS
    [ 10.484243] acpi device:4b: registered as cooling_device4
    [ 10.484911] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:4a/LNXVIDEO:01/input/input3
    [ 10.484921] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 10.494126] thermal LNXTHERM:00: registered as thermal_zone0
    [ 10.494129] ACPI: Thermal Zone [TZ00] (58 C)
    [ 10.506259] ACPI: Deprecated procfs I/F for battery is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 10.506267] ACPI: Battery Slot [BAT0] (battery present)
    [ 10.517446] ACPI: Deprecated procfs I/F for AC is loaded, please retry with CONFIG_ACPI_PROCFS_POWER cleared
    [ 10.524583] thermal LNXTHERM:01: registered as thermal_zone1
    [ 10.524586] ACPI: Thermal Zone [TZ01] (58 C)
    [ 10.530700] ACPI: AC Adapter [ADP1] (off-line)
    [ 10.648271] input: PC Speaker as /devices/platform/pcspkr/input/input4
    [ 10.773153] iTCO_vendor_support: vendor-support=0
    [ 10.924548] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
    [ 10.924706] iTCO_wdt: Found a HM55 TCO device (Version=2, TCOBASE=0x0460)
    [ 10.924868] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 10.926971] sky2: driver version 1.28
    [ 10.927036] sky2 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.927049] sky2 0000:04:00.0: setting latency timer to 64
    [ 10.927089] sky2 0000:04:00.0: Yukon-2 Optima chip revision 1
    [ 10.927203] sky2 0000:04:00.0: irq 42 for MSI/MSI-X
    [ 10.927532] sky2 0000:04:00.0: eth0: addr 54:42:49:10:6d:46
    [ 11.021491] cfg80211: Calling CRDA to update world regulatory domain
    [ 11.030984] usbcore: registered new interface driver usbfs
    [ 11.031163] usbcore: registered new interface driver hub
    [ 11.031208] usbcore: registered new device driver usb
    [ 11.054022] sony_laptop: Sony Notebook Control Driver v0.6
    [ 11.064072] input: Sony Vaio Keys as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/SNY5001:00/input/input5
    [ 11.064128] input: Sony Vaio Jogdial as /devices/virtual/input/input6
    [ 11.064240] sony_laptop: brightness ignored, must be controlled by ACPI video driver
    [ 11.268875] mei: module is from the staging directory, the quality is unknown, you have been warned.
    [ 11.269169] mei 0000:00:16.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.269177] mei 0000:00:16.0: setting latency timer to 64
    [ 11.304449] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    [ 11.319698] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 11.319743] sr 1:0:0:0: Attached scsi generic sg1 type 5
    [ 11.354358] sdhci: Secure Digital Host Controller Interface driver
    [ 11.354362] sdhci: Copyright(c) Pierre Ossman
    [ 11.374472] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 11.374519] ehci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.374559] ehci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 11.374564] ehci_hcd 0000:00:1a.0: EHCI Host Controller
    [ 11.374590] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 11.374630] ehci_hcd 0000:00:1a.0: debug port 2
    [ 11.378526] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
    [ 11.378534] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xf5e08000
    [ 11.389468] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 11.389714] hub 1-0:1.0: USB hub found
    [ 11.389721] hub 1-0:1.0: 2 ports detected
    [ 11.389823] ehci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
    [ 11.389872] ehci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 11.389877] ehci_hcd 0000:00:1d.0: EHCI Host Controller
    [ 11.389894] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 11.389929] ehci_hcd 0000:00:1d.0: debug port 2
    [ 11.393814] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
    [ 11.393838] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xf5e07000
    [ 11.406179] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 11.406377] hub 2-0:1.0: USB hub found
    [ 11.406382] hub 2-0:1.0: 2 ports detected
    [ 11.514999] sdhci-pci 0000:03:00.0: SDHCI controller found [1180:e822] (rev 0)
    [ 11.515023] sdhci-pci 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 11.515072] sdhci-pci 0000:03:00.0: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 11.515081] sdhci-pci 0000:03:00.0: setting latency timer to 64
    [ 11.515108] _regulator_get: 0000:03:00.0 supply vmmc not found, using dummy regulator
    [ 11.515145] Registered led device: mmc0::
    [ 11.515206] mmc0: SDHCI controller on PCI [0000:03:00.0] using DMA
    [ 11.515222] sdhci-pci 0000:03:00.4: SDHCI controller found [1180:e822] (rev 0)
    [ 11.515237] sdhci-pci 0000:03:00.4: PCI INT C -> GSI 19 (level, low) -> IRQ 19
    [ 11.515253] sdhci-pci 0000:03:00.4: Will use DMA mode even though HW doesn't fully claim to support it.
    [ 11.515261] sdhci-pci 0000:03:00.4: setting latency timer to 64
    [ 11.515278] _regulator_get: 0000:03:00.4 supply vmmc not found, using dummy regulator
    [ 11.515308] Registered led device: mmc1::
    [ 11.515344] mmc1: SDHCI controller on PCI [0000:03:00.4] using DMA
    [ 11.696095] usb 1-1: new high speed USB device number 2 using ehci_hcd
    [ 11.800486] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input7
    [ 11.823379] hub 1-1:1.0: USB hub found
    [ 11.823555] hub 1-1:1.0: 6 ports detected
    [ 11.881300] ath9k 0000:02:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 11.881313] ath9k 0000:02:00.0: setting latency timer to 64
    [ 11.899363] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    [ 11.899454] HDA Intel 0000:00:1b.0: irq 43 for MSI/MSI-X
    [ 11.899494] HDA Intel 0000:00:1b.0: setting latency timer to 64
    [ 11.929270] usb 2-1: new high speed USB device number 2 using ehci_hcd
    [ 11.931327] ath: EEPROM regdomain: 0x65
    [ 11.931329] ath: EEPROM indicates we should expect a direct regpair map
    [ 11.931333] ath: Country alpha2 being used: 00
    [ 11.931334] ath: Regpair used: 0x65
    [ 12.053537] hub 2-1:1.0: USB hub found
    [ 12.053638] hub 2-1:1.0: 8 ports detected
    [ 12.058338] fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY' taints kernel.
    [ 12.058344] Disabling lock debugging due to kernel taint
    [ 12.089898] [fglrx] Maximum main memory to use for locked dma buffers: 3660 MBytes.
    [ 12.090143] [fglrx] vendor: 1002 device: 68e0 count: 1
    [ 12.090556] [fglrx] ioport: bar 4, base 0xd000, size: 0x100
    [ 12.090572] pci 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 12.090577] pci 0000:01:00.0: setting latency timer to 64
    [ 12.090779] [fglrx] Kernel PAT support is enabled
    [ 12.090802] [fglrx] module loaded - fglrx 8.87.5 [Jul 7 2011] with 1 minors
    [ 12.101099] ieee80211 phy0: Selected rate control algorithm 'ath9k_rate_control'
    [ 12.101452] Registered led device: ath9k-phy0
    [ 12.101460] ieee80211 phy0: Atheros AR9285 Rev:2 mem=0xffffc90005d00000, irq=16
    [ 12.115758] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input8
    [ 12.117699] input: HDA Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 12.117756] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
    [ 12.117877] HDA Intel 0000:01:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 12.117956] HDA Intel 0000:01:00.1: irq 44 for MSI/MSI-X
    [ 12.117979] HDA Intel 0000:01:00.1: setting latency timer to 64
    [ 12.132761] usb 1-1.2: new full speed USB device number 3 using ehci_hcd
    [ 12.168259] HDMI status: Pin=3 Presence_Detect=0 ELD_Valid=0
    [ 12.168639] input: HD-Audio Generic HDMI/DP as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input11
    [ 12.265962] usb 1-1.2: new high speed USB device number 4 using ehci_hcd
    [ 12.387463] cfg80211: World regulatory domain updated:
    [ 12.387466] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.387469] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387472] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 12.387474] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
    [ 12.387477] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387479] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
    [ 12.387493] cfg80211: Calling CRDA for country: IT
    [ 12.390329] cfg80211: Regulatory domain changed to country: IT
    [ 12.390332] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
    [ 12.390334] cfg80211: (2402000 KHz - 2482000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390337] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390339] cfg80211: (5250000 KHz - 5330000 KHz @ 40000 KHz), (N/A, 2000 mBm)
    [ 12.390341] cfg80211: (5490000 KHz - 5710000 KHz @ 40000 KHz), (N/A, 2700 mBm)
    [ 12.462672] usb 2-1.2: new low speed USB device number 3 using ehci_hcd
    [ 12.939879] Linux media interface: v0.10
    [ 12.994380] input: USB OPTICAL MOUSE as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.2/2-1.2:1.0/input/input12
    [ 12.994487] generic-usb 0003:15D9:0A4C.0001: input,hidraw0: USB HID v1.11 Mouse [ USB OPTICAL MOUSE] on usb-0000:00:1d.0-1.2/input0
    [ 12.994502] usbcore: registered new interface driver usbhid
    [ 12.994504] usbhid: USB HID core driver
    [ 13.030968] Linux video capture interface: v2.00
    [ 13.053392] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:a213)
    [ 13.060994] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input13
    [ 13.061057] usbcore: registered new interface driver uvcvideo
    [ 13.061059] USB Video Class driver (v1.1.0)
    [ 15.202804] EXT4-fs (sda7): re-mounted. Opts: (null)
    [ 15.503756] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 15.505206] SGI XFS Quota Management subsystem
    [ 15.527846] XFS (sda10): Mounting Filesystem
    [ 16.058466] XFS (sda10): Ending clean mount
    [ 16.172238] REISERFS (device sda8): found reiserfs format "3.6" with standard journal
    [ 16.172257] REISERFS (device sda8): using ordered data mode
    [ 16.180082] REISERFS (device sda8): journal params: device sda8, size 8192, journal first block 18, max trans len 1024, max batch 900, max commit age 30, max trans age 30
    [ 16.180470] REISERFS (device sda8): checking transaction log (sda8)
    [ 16.225092] REISERFS (device sda8): Using r5 hash to sort names
    [ 16.362086] EXT3-fs: barriers not enabled
    [ 16.377355] kjournald starting. Commit interval 5 seconds
    [ 16.377554] EXT3-fs (sda6): using internal journal
    [ 16.377560] EXT3-fs (sda6): mounted filesystem with ordered data mode
    [ 16.475339] fuse init (API version 7.16)
    [ 17.345752] Adding 1052220k swap on /dev/sda9. Priority:-1 extents:1 across:1052220k
    Last edited by TheImmortalPhoenix (2011-08-17 13:23:54)

  • [SOLVED] System freeze after upgrade linux-3.12.9-2 to linux-3.13.4-1

    After upgrading from kernel 3.12.9 to 3.13.4 (booth x86_64 architecture) i detected system freeze after round about 0.5s of the login screen about 80% of the time.
    So i first thought it coulbe be the the ati driver and uninstalled that via livecd/chroot.
    But the same thing happens in comand line only mode.
    Afterwards i setup at ssh server to get into the maschine if it is still running, but is was also not responding to that.
    Downgrading to 3.12.9 solved the issue. In journalctl i could not find any usefull information.
    Last edited by schlumpfimsumpf (2014-04-10 19:16:57)

    Me wrote:
    It is same for me. Wont boot, and crash before I can write mine pass to text screen. I use lts at now.
    H/W path Device Class Description
    ===============================================
    system GA-970A-UD3
    /0 bus GA-970A-UD3
    /0/0 memory 128KiB BIOS
    /0/4 processor Athlon
    /0/4/a memory 128KiB L1 cache
    /0/4/c memory 2MiB L3 cache
    /0/b memory 128KiB L1 cache
    /0/29 memory 8GiB System Memory
    /0/29/0 memory DIMM 1600 MHz (0,6 ns) [empty]
    /0/29/1 memory DIMM 1600 MHz (0,6 ns) [empty]
    /0/29/2 memory 4GiB DIMM 1600 MHz (0,6 ns)
    /0/29/3 memory 4GiB DIMM 1600 MHz (0,6 ns)
    /0/100 bridge RD890 PCI to PCI bridge (external gfx0 port B)
    /0/100/0.2 generic RD990 I/O Memory Management Unit (IOMMU)
    /0/100/2 bridge RD890 PCI to PCI bridge (PCI express gpp port B)
    /0/100/2/0 display GF106 [GeForce GTS 450]
    /0/100/2/0.1 multimedia GF106 High Definition Audio Controller
    /0/100/4 bridge RD890 PCI to PCI bridge (PCI express gpp port D)
    /0/100/4/0 bus EJ168 USB 3.0 Host Controller
    /0/100/4/0/0 usb3 bus xHCI Host Controller
    /0/100/4/0/0/2 storage ADATA USB Flash Drive
    /0/100/4/0/1 usb2 bus xHCI Host Controller
    /0/100/9 bridge RD890 PCI to PCI bridge (PCI express gpp port H)
    /0/100/9/0 eth0 network RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller
    /0/100/a bridge RD890 PCI to PCI bridge (external gfx1 port A)
    /0/100/a/0 bus EJ168 USB 3.0 Host Controller
    /0/100/a/0/0 usb8 bus xHCI Host Controller
    /0/100/a/0/1 usb7 bus xHCI Host Controller
    /0/100/11 storage SB7x0/SB8x0/SB9x0 SATA Controller [AHCI mode]
    /0/100/12 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/12/1 usb6 bus OHCI Host Controller
    /0/100/12/1/5 input M Dongle
    /0/100/12.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/12.2/1 usb1 bus EHCI Host Controller
    /0/100/13 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/13/1 usb9 bus OHCI Host Controller
    /0/100/13/1/1 input USB Receiver
    /0/100/13.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/13.2/1 usb4 bus EHCI Host Controller
    /0/100/14 bus SBx00 SMBus Controller
    /0/100/14.2 multimedia SBx00 Azalia (Intel HDA)
    /0/100/14.3 bridge SB7x0/SB8x0/SB9x0 LPC host controller
    /0/100/14.4 bridge SBx00 PCI to PCI Bridge
    /0/100/14.4/7 multimedia SAA7134/SAA7135HL Video Broadcast Decoder
    /0/100/14.4/e bus VT6306/7/8 [Fire II(M)] IEEE 1394 OHCI Controller
    /0/100/14.5 bus SB7x0/SB8x0/SB9x0 USB OHCI2 Controller
    /0/100/14.5/1 usb10 bus OHCI Host Controller
    /0/100/15 bridge SB700/SB800/SB900 PCI to PCI bridge (PCIE port 0)
    /0/100/16 bus SB7x0/SB8x0/SB9x0 USB OHCI0 Controller
    /0/100/16/1 usb11 bus OHCI Host Controller
    /0/100/16/1/3 multimedia USB Web Camera
    /0/100/16/1/4 multimedia USB Sound Device
    /0/100/16.2 bus SB7x0/SB8x0/SB9x0 USB EHCI Controller
    /0/100/16.2/1 usb5 bus EHCI Host Controller
    /0/101 bridge Family 15h Processor Function 0
    /0/102 bridge Family 15h Processor Function 1
    /0/103 bridge Family 15h Processor Function 2
    /0/104 bridge Family 15h Processor Function 3
    /0/105 bridge Family 15h Processor Function 4
    /0/106 bridge Family 15h Processor Function 5
    /1 scsi6 storage
    Working again. I think problem was the partition was full.
    Last edited by gyurman (2014-04-13 07:51:22)

  • Issue after upgrading SOLMAN-Kernel to 700-201

    Hi Gurus,
    I have upgraded SOLMAN Kernel from 700-144 to 700-201. I have done step by step upgrade i.e.,
    700-147 to 700-175 - No issues
    700-175 to 700-201 - Server started partially.
    In the Console, the server is partially started after upgrading from 175 to 201(Yellow and Green).
    "Dispatcher Running but not connected to Message Server, J2EE: All processes  running"
    I am able to login to all clients as well as J2EE.
    are there any patch or any OSS notes to implement after upgrading to Kernel 700-201?
    SOLMAN:
    SP-17
    WIN-32
    Thanks in advance...
    Regards
    Shreeshail Ganiger

    Dear Shreeshail,
    Try to upgrade your kernel to 221, there are quite issues with 201for some installations.
    Check if your satstartsrv.exe has been updated with new version too. this you can check with file version by right clicking.
    Regards
    Shailesh

  • [Solved] HDMI audio broken after upgrading to kernel 3.13.4

    Hi,
    Yesterday I upgraded to kernel 3.13.4 from 3.12.9 and
    HDMI audio through my nVidia GTX660 card stopped working.
    The problem occurs both with nouveau and nVidia drivers.
    My system is an aged Intel quadcore Q9400 on a Intel motherboard.
    By typing "aplay -l" I get:
    card 0: Intel [HDA Intel], device 0: 92HD73E1X5 Analog [92HD73E1X5 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: 92HD73E1X5 Digital [92HD73E1X5 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 2: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    Strangely the alsa card number changed from 1 to 2
    after the kernel upgrade.
    I would really appreciate any help.
    Thanks
    Last edited by tenoriocalc (2014-02-23 16:02:46)

    Thank you very much, silenceleaf.
    I managed to make it work with some tweaking like you said.
    But only after a deep power cycle, unpluging any power to the system.
    Just turning off the machine's power button was not enough. Odd!
    Last edited by tenoriocalc (2014-02-23 16:09:44)

  • Random Kernel Panic after upgrade to kernel 2.6.36

    Hello,
    First of all, I apologise if this topic has already come up on the forums, but i've checked and can't see anything specifically relating to the problem im having, and ive also checked the bugs section of Archwiki and can't seem to see anything on there either. I'm not sure what information you guys need so ill just post as much as I can think of in this thread and then if you need any other info, ill post it on request.
    The problem im having relates to a recent system update, which I did sometime within the past 4 weeks or so, after not upgrading for quite a while due to lack of free time.
    In the last update I remember seeing it upgrading the kernel from 2.6.35 to 2.6.36, and since then I have been getting completly random kernel panics, whereby everything freezes. If I have audio output, the sound crashes and everything freezes, and the caps lock and scroll lock lights just flash in sync on the keyboard.
    I have never had any problems like this in all the 7 months that i've been using Arch as a permenant OS.
    Hardware:
    Mobo: ASRock 775Dual-VSTA
    Ram: 2GB (2x 1GB different brand sticks, same specs)
    CPU: Intel Core 2 Duo 1.6GHz
    GFX: Nvidia 8800GT 512MB
    Plug and Play hardware that is normally always connected:
    1. Zoom Wireless Dongle (4410b chipset, using ndiswrapper and the Zoom windows driver)
    2. Digital TV Stick (Artec T1) with specific firmware and using MeTV as a viewer.
    I've looked in all of the logs, including: dmesg, everything.log, daemon.log, errors.log, messages.log and all the other logs. But there is very little information relating to the crash in there. I'm guessing this is because its a kernel panic so it doesn't have chance to dump anything into the logs before it all crashes? If needs be I can post whichever logs you think will be most useful, but i'm using my laptop at the minute so I wont get chance to post them until tomorrow evening.
    I've also tried enabling the testing repos and upgraded to kernel 2.6.37-1 to see if this suspected bug is fixed, but the panic seems to happen the same, if not more with kernel 2.6.37-1. At the minute I've rolled my system back to kernel 2.6.36 because it seemed a little more stable.
    It doesn't just crash when your in the X server either. Theres been a few times when i've had a kernel panic during boot. Sometimes a couple of seconds after it starts to boot into Arch. And sometimes just as its processing the Udev events. But as I say it seems completely random rather than relating to specific events.
    During one of the crashes at boot I got an error message on the screen which read:
    Setting Latency Timer to 64
    HDA Intel 0000:80:01.0: PCI: disallowing DAC for device
    [<c131621b>] ? error_code+0x67/0x6c
    Thats as much as I can think of at the minute. As I say, if you need any more information or need me to paste my log files then let me know and i will do that tomorrow.
    Thanks in advance for the help, its much appreciated.
    Scott.
    Last edited by ScottWilson1990 (2011-01-10 01:18:26)

    Hi Daniel,
    I'm just guessing that its a kenel panic, as when it happens both the caps lock and scroll lock lights flash in sync, which is a sign of kernel panic isn't it?
    My cpu is i686.
    I've just read that post and i've downgraded udev to 164-3 to see if this solves the problem as some people have said in that post, although others later on in the thread say that this doesn't solve it for them. This morning it took me 4 restarts just to get arch to boot without the panic. I took a picture of the screen during the panic which ill post after work this evening, it looks pretty similar to the picture posted by "rabid_works" in the thread you pasted. I'm not sure about your post in the other threat that relates to the errors in the Oops report, could you clarify this so I can see if the problems reported in that thread are what I am experiencing?.
    In the meantime, here is my pacman.log from 26.12.10 when I did the upgrade and the problems started. (note I have done upgrades following 26.12.10 to see if anything fixed the problem but with no luck, that is why the log is so long and I don't have any hosting anymore, so i've had to post it in quotes, I apologise).
    [2010-12-26 15:13] Running 'pacman -Sy'
    [2010-12-26 15:13] synchronizing package lists
    [2010-12-26 15:14] Running 'pacman -Syu'
    [2010-12-26 15:14] synchronizing package lists
    [2010-12-26 15:14] starting full system upgrade
    [2010-12-26 15:35] Running 'pacman -Syu'
    [2010-12-26 15:35] synchronizing package lists
    [2010-12-26 15:35] starting full system upgrade
    [2010-12-26 16:45] removed libusb1 (1.0.8-1)
    [2010-12-26 16:45] removed pycairo (1.8.10-2)
    [2010-12-26 16:45] removed python-numpy (1.5.0-2)
    [2010-12-26 16:45] upgraded gnome-menus (2.30.4-2 -> 2.30.5-1)
    [2010-12-26 16:45] upgraded gnome-desktop (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:45] upgraded tzdata (2010n-1 -> 2010o-1)
    [2010-12-26 16:45] Generating locales...
    [2010-12-26 16:45]   en_GB.UTF-8... done
    [2010-12-26 16:45]   en_US.UTF-8... done
    [2010-12-26 16:46]   en_US.ISO-8859-1... done
    [2010-12-26 16:46] Generation complete.
    [2010-12-26 16:46] upgraded glibc (2.12.1-3 -> 2.12.1-4)
    [2010-12-26 16:46] upgraded gcc-libs (4.5.1-1 -> 4.5.1-2)
    [2010-12-26 16:46] upgraded pcre (8.10-1 -> 8.11-1)
    [2010-12-26 16:46] upgraded glib2 (2.26.0-2 -> 2.26.1-1)
    [2010-12-26 16:46] upgraded zlib (1.2.5-2 -> 1.2.5-3)
    [2010-12-26 16:46] upgraded ncurses (5.7-3 -> 5.7-4)
    [2010-12-26 16:46] upgraded readline (6.1.002-1 -> 6.1.002-2)
    [2010-12-26 16:46] upgraded libxml2 (2.7.7-2 -> 2.7.8-1)
    [2010-12-26 16:46] upgraded bash (4.1.009-1 -> 4.1.009-3)
    [2010-12-26 16:46] upgraded findutils (4.4.2-2 -> 4.4.2-3)
    [2010-12-26 16:46] upgraded gzip (1.4-1 -> 1.4-2)
    [2010-12-26 16:46] upgraded texinfo (4.13a-4 -> 4.13a-5)
    [2010-12-26 16:46] upgraded libtasn1 (2.6-1 -> 2.8-1)
    [2010-12-26 16:46] upgraded gnutls (2.8.6-1 -> 2.10.4-1)
    [2010-12-26 16:46] upgraded libsoup (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:46] upgraded db (5.1.19-2 -> 5.1.19-3)
    [2010-12-26 16:46] upgraded openssl (1.0.0.a-3 -> 1.0.0.c-1)
    [2010-12-26 16:46] upgraded sqlite3 (3.7.3-1 -> 3.7.4-1)
    [2010-12-26 16:46] upgraded heimdal (1.3.3-2 -> 1.3.3-4)
    [2010-12-26 16:46] upgraded evolution-data-server (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded inputproto (2.0-1 -> 2.0.1-1)
    [2010-12-26 16:46] upgraded libxi (1.3.2-1 -> 1.4.0-1)
    [2010-12-26 16:46] upgraded libpng (1.4.4-1 -> 1.4.5-1)
    [2010-12-26 16:46] upgraded expat (2.0.1-5 -> 2.0.1-6)
    [2010-12-26 16:46] upgraded xproto (7.0.18-1 -> 7.0.20-1)
    [2010-12-26 16:46] upgraded libx11 (1.3.5-1 -> 1.4.0-1)
    [2010-12-26 16:46] upgraded attr (2.4.44-1 -> 2.4.44-2)
    [2010-12-26 16:46] upgraded libcap (2.19-1 -> 2.19-2)
    [2010-12-26 16:46] upgraded coreutils (8.6-1 -> 8.7-1)
    [2010-12-26 16:46] warning: /etc/hosts installed as /etc/hosts.pacnew
    [2010-12-26 16:46] warning: /etc/gshadow installed as /etc/gshadow.pacnew
    [2010-12-26 16:46] upgraded filesystem (2010.10-1 -> 2010.12-1)
    [2010-12-26 16:46] upgraded dbus-core (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:46] upgraded dbus (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:46] upgraded avahi (0.6.27-7 -> 0.6.28-1)
    [2010-12-26 16:46] upgraded libcups (1.4.4-3 -> 1.4.5-2)
    [2010-12-26 16:46] upgraded gdk-pixbuf2 (2.22.0-2 -> 2.22.1-1)
    [2010-12-26 16:46] upgraded gtk2 (2.22.0-5 -> 2.22.1-1)
    [2010-12-26 16:46] upgraded librsvg (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded libogg (1.2.0-1 -> 1.2.2-1)
    [2010-12-26 16:46] upgraded libvorbis (1.3.1-1 -> 1.3.2-1)
    [2010-12-26 16:46] upgraded gstreamer0.10 (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded libcanberra (0.25-1 -> 0.26-3)
    [2010-12-26 16:46] upgraded libwnck (2.30.5-1 -> 2.30.6-1)
    [2010-12-26 16:46] upgraded gnome-panel (2.32.0.2-2 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded alacarte (0.13.2-2 -> 0.13.2-3)
    [2010-12-26 16:46] upgraded alsa-utils (1.0.23-2 -> 1.0.23-3)
    [2010-12-26 16:46] upgraded amsn (0.98.3-4 -> 0.98.4-1)
    [2010-12-26 16:46] upgraded libusb (0.1.12-4 -> 1.0.8-1)
    [2010-12-26 16:46] installed libusb-compat (0.1.3-1)
    [2010-12-26 16:46] upgraded ardour (2.8.11-1 -> 2.8.11-2)
    [2010-12-26 16:46] upgraded automake (1.11.1-1 -> 1.11.1-2)
    [2010-12-26 16:46] upgraded bluez (4.77-1 -> 4.82-1)
    [2010-12-26 16:46] upgraded boost-libs (1.43.0-2 -> 1.45.0-1)
    [2010-12-26 16:46] upgraded orc (0.4.7-1 -> 0.4.11-1)
    [2010-12-26 16:46] upgraded udev (163-1 -> 164-3)
    [2010-12-26 16:46] upgraded gstreamer0.10-base (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded gstreamer0.10-base-plugins (0.10.30-1 -> 0.10.31-1)
    [2010-12-26 16:46] upgraded file (5.04-2 -> 5.04-3)
    [2010-12-26 16:46] upgraded cdrkit (1.1.10-1 -> 1.1.11-1)
    [2010-12-26 16:46] upgraded libao (1.0.0-2 -> 1.0.0-5)
    [2010-12-26 16:46] upgraded cdrdao (1.2.3-4 -> 1.2.3-5)
    [2010-12-26 16:46] upgraded brasero (2.32.0-3 -> 2.32.1-1)
    [2010-12-26 16:46] upgraded run-parts (3.2.3-1 -> 3.4.1-1)
    [2010-12-26 16:46] upgraded sed (4.2.1-2 -> 4.2.1-3)
    [2010-12-26 16:46] Clearing symlinks in /etc/ssl/certs...done.
    [2010-12-26 16:46] Updating certificates in /etc/ssl/certs... 141 added, 0 removed; done.
    [2010-12-26 16:46] Running hooks in /etc/ca-certificates/update.d....
    [2010-12-26 16:46] updating keystore /etc/ssl/certs/java/cacerts...
    [2010-12-26 16:46]   added: /etc/ssl/certs/brasil.gov.br.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cacert.org.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/ca.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cert_igca_dsa.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/cert_igca_rsa.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/ABAecom_=sub.__Am._Bankers_Assn.=_Root_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AOL_Time_Warner_Root_Certification_Authority_1.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AOL_Time_Warner_Root_Certification_Authority_2.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_External_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Low-Value_Services_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Public_Services_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/AddTrust_Qualified_Certificates_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/America_Online_Root_Certification_Authority_1.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/America_Online_Root_Certification_Authority_2.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Baltimore_CyberTrust_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/COMODO_Certification_Authority.pem
    [2010-12-26 16:46]   ignored import, signature not available: /etc/ssl/certs/COMODO_ECC_Certification_Authority.pem
    [2010-12-26 16:46] keytool error: java.security.NoSuchAlgorithmException: SHA384withECDSA Signature not available
    [2010-12-26 16:46]   added: /etc/ssl/certs/Camerfirma_Chambers_of_Commerce_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Camerfirma_Global_Chambersign_Root.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Certplus_Class_2_Primary_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Certum_Root_CA.pem
    [2010-12-26 16:46]   added: /etc/ssl/certs/Comodo_AAA_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Comodo_Secure_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Comodo_Trusted_Services_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DST_ACES_CA_X6.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DST_Root_CA_X3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_Assured_ID_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_Global_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiCert_High_Assurance_EV_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/DigiNotar_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Digital_Signature_Trust_Co._Global_CA_4.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Global_Secure_Personal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Global_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Premium_2048_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Secure_Personal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust.net_Secure_Server_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Entrust_Root_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_Global_eBusiness_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_eBusiness_CA_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Equifax_Secure_eBusiness_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Firmaprofesional_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GTE_CyberTrust_Global_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GTE_CyberTrust_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Global_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Global_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Primary_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Universal_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GeoTrust_Universal_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GlobalSign_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/GlobalSign_Root_CA_-_R2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Go_Daddy_Class_2_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASE1_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASE3_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASEA1_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_CLASEA3_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Chained_CAs_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Servidores_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/IPS_Timestamping_root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Business_=Class_B=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Express_=Class_C=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Notary_=Class_A=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/NetLock_Qualified_=Class_QA=_Root.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Network_Solutions_Certificate_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA_2.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/QuoVadis_Root_CA_3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Root_Certificate_1.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Security_1024_v3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/RSA_Security_2048_v3.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/SecureTrust_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Secure_Global_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Security_Communication_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Sonera_Class_1_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Sonera_Class_2_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Staat_der_Nederlanden_Root_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/Starfield_Class_2_CA.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/StartCom_Certification_Authority.pem
    [2010-12-26 16:47]   added: /etc/ssl/certs/StartCom_Ltd..pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Gold_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Platinum_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/SwissSign_Silver_CA_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Swisscom_Root_CA_1.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TC_TrustCenter__Germany__Class_2_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TC_TrustCenter__Germany__Class_3_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TDC_Internet_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TDC_OCES_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TURKTRUST_Certificate_Services_Provider_Root_1.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/TURKTRUST_Certificate_Services_Provider_Root_2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Taiwan_GRCA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Basic_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Freemail_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Personal_Premium_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Premium_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Thawte_Time_Stamping_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN-USER_First-Network_Applications.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_DATACorp_SGC_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_USERFirst_Email_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/UTN_USERFirst_Hardware_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/ValiCert_Class_1_VA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/ValiCert_Class_2_VA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/VeriSign_Class_3_Public_Primary_Certification_Authority_-_G5.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_1_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_2_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_3_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_4_Public_Primary_Certification_Authority_-_G2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Class_4_Public_Primary_Certification_Authority_-_G3.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_RSA_Secure_Server_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Verisign_Time_Stamping_Authority_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Visa_International_Global_Root_2.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Visa_eCommerce_Root.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/WellsSecure_Public_Root_Certificate_Authority.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/Wells_Fargo_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/XRamp_Global_CA_Root.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA-Baltimore_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA_-_Entrust_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/beTRUSTed_Root_CA_-_RSA_Implementation.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/thawte_Primary_Root_CA.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/signet_ca1_pem.pem
    [2010-12-26 16:48]   added: /etc/ssl/certs/signet_ca2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ca3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ocspklasa2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_ocspklasa3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_pca2_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_pca3_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_rootca_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/signet_tsa1_pem.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/spi-ca-2003.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/spi-cacert-2008.pem
    [2010-12-26 16:49]   added: /etc/ssl/certs/deutsche-telekom-root-ca-2.pem
    [2010-12-26 16:49] done.
    [2010-12-26 16:49] done.
    [2010-12-26 16:49] upgraded ca-certificates (20090814-3 -> 20090814+nmu2-1)
    [2010-12-26 16:49] upgraded ca-certificates-java (20090629-2 -> 20100412-2)
    [2010-12-26 16:49] upgraded cairomm (1.8.4-1 -> 1.8.6-1)
    [2010-12-26 16:49] upgraded curl (7.21.2-2 -> 7.21.3-1)
    [2010-12-26 16:49] upgraded dbus-glib (0.86-1 -> 0.92-1)
    [2010-12-26 16:49] upgraded python2 (2.7-3 -> 2.7.1-3)
    [2010-12-26 16:49] upgraded libtorrent-rasterbar (0.15.4-2 -> 0.15.4-3)
    [2010-12-26 16:49] upgraded twisted (10.1.0-1 -> 10.2.0-1)
    [2010-12-26 16:49] installed python2-chardet (2.0.1-3)
    [2010-12-26 16:49] >>> Deluge's daemon is running default with the "deluge" user. The default download directory is /srv/deluge/.
    [2010-12-26 16:49]     You can change the user by editing /etc/conf.d/deluged
    [2010-12-26 16:49] upgraded deluge (1.3.1-1 -> 1.3.1-2)
    [2010-12-26 16:49] upgraded device-mapper (2.02.75-1 -> 2.02.78-1)
    [2010-12-26 16:49] upgraded dhcpcd (5.2.8-1 -> 5.2.9-1)
    [2010-12-26 16:49] upgraded diffutils (3.0-1 -> 3.0-2)
    [2010-12-26 16:49] upgraded dnsutils (9.7.1.P2-1 -> 9.7.2.P3-1)
    [2010-12-26 16:49] upgraded eog (2.32.0-2 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded ethtool (6-2 -> 2.6.35-2)
    [2010-12-26 16:49] upgraded fakeroot (1.14.4-2 -> 1.14.5-1)
    [2010-12-26 16:49] upgraded feh (1.10-1 -> 1.10.1-1)
    [2010-12-26 16:49] upgraded sdl (1.2.14-5 -> 1.2.14-6)
    [2010-12-26 16:49] upgraded schroedinger (1.0.9-1 -> 1.0.10-1)
    [2010-12-26 16:49] upgraded libvpx (0.9.5-1 -> 0.9.5-2)
    [2010-12-26 16:49] upgraded libdrm (2.4.21-2 -> 2.4.22-3)
    [2010-12-26 16:49] upgraded pixman (0.18.4-1 -> 0.20.0-1)
    [2010-12-26 16:49] upgraded xorg-server-common (1.9.2-1 -> 1.9.2-2)
    [2010-12-26 16:49] upgraded xorg-server (1.9.2-1 -> 1.9.2-2)
    [2010-12-26 16:49] upgraded nvidia-utils (260.19.12-1 -> 260.19.29-1)
    [2010-12-26 16:49] upgraded libva (1.0.5-2 -> 1.0.6-1)
    [2010-12-26 16:49] upgraded ffmpeg (25472-1 -> 25679-1)
    [2010-12-26 16:49] upgraded file-roller (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded xulrunner (1.9.2.12-1 -> 1.9.2.13-2)
    [2010-12-26 16:49] upgraded firefox (3.6.12-1 -> 3.6.13-1)
    [2010-12-26 16:49] upgraded flashplugin (10.1.85.3-1 -> 10.1.102.65-1)
    [2010-12-26 16:49] installed libasyncns (0.8-3)
    [2010-12-26 16:49] installed libpulse (0.9.22-2)
    [2010-12-26 16:49] upgraded fluidsynth (1.1.3-1 -> 1.1.3-2)
    [2010-12-26 16:49] upgraded freetype2 (2.4.3-1 -> 2.4.4-1)
    [2010-12-26 16:49] upgraded gawk (3.1.8-1 -> 3.1.8-2)
    [2010-12-26 16:49] upgraded gcalctool (5.32.0-2 -> 5.32.2-1)
    [2010-12-26 16:49] upgraded gcc (4.5.1-1 -> 4.5.1-2)
    [2010-12-26 16:49] upgraded gen-init-cpio (2.6.32-1 -> 2.6.36-1)
    [2010-12-26 16:49] upgraded ghostscript (9.00-1 -> 9.00-2)
    [2010-12-26 16:49] upgraded gmime (2.4.19-1 -> 2.4.21-1)
    [2010-12-26 16:49] upgraded gucharmap (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:49] upgraded libnotify (0.4.5-1.1 -> 0.5.2-1)
    [2010-12-26 16:50] upgraded gnome-applets (2.32.0-3 -> 2.32.1.1-1)
    [2010-12-26 16:50] installed libgnome-data (2.32.0-3)
    [2010-12-26 16:50] upgraded gnome-settings-daemon (2.32.0-1 -> 2.32.1-2)
    [2010-12-26 16:50] upgraded gnome-control-center (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] installed python2-gconf (2.28.1-5)
    [2010-12-26 16:50] upgraded gnome-games (2.32.0-3 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-good (0.10.24-1 -> 0.10.26-1)
    [2010-12-26 16:50] upgraded libsoup-gnome (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-good-plugins (0.10.24-1 -> 0.10.26-1)
    [2010-12-26 16:50] upgraded gnome-media (2.32.0-1 -> 2.32.0-2)
    [2010-12-26 16:50] upgraded gnome-panel-bonobo (2.32.0.2-2 -> 2.32.1-1)
    [2010-12-26 16:50] installed python2-bonobo (2.28.1-5)
    [2010-12-26 16:50] installed python2-libgnome (2.28.1-5)
    [2010-12-26 16:50] installed python2-gnomecanvas (2.28.1-5)
    [2010-12-26 16:50] installed python2-gnomevfs (2.28.1-5)
    [2010-12-26 16:50] upgraded gnome-python (2.28.1-3 -> 2.28.1-5)
    [2010-12-26 16:50] upgraded polkit (0.98-1 -> 0.99-1)
    [2010-12-26 16:50] upgraded procps (3.2.8-1 -> 3.2.8-3)
    [2010-12-26 16:50] upgraded pm-utils (1.4.0-1 -> 1.4.1-1)
    [2010-12-26 16:50] upgraded upower (0.9.6-0.20100929 -> 0.9.7-2)
    [2010-12-26 16:50] upgraded polkit-gnome (0.97-1 -> 0.99-1)
    [2010-12-26 16:50] upgraded gnome-session (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded vte (0.26.1-1 -> 0.26.2-1)
    [2010-12-26 16:50] upgraded gnome-terminal (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gnome-themes (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:50] upgraded gnupg (1.4.11-1 -> 1.4.11-2)
    [2010-12-26 16:50] upgraded gnupg2 (2.0.16-2 -> 2.0.16-3)
    [2010-12-26 16:50] installed atkmm (2.22.1-1)
    [2010-12-26 16:50] upgraded gtkmm (2.20.3-1 -> 2.22.0-1)
    [2010-12-26 16:50] upgraded gparted (0.7.0-1 -> 0.7.1-1)
    [2010-12-26 16:50] upgraded gpm (1.20.6-5 -> 1.20.6-6)
    [2010-12-26 16:50] upgraded gstreamer0.10-bad (0.10.19-1 -> 0.10.20-1)
    [2010-12-26 16:50] upgraded libdc1394 (2.1.2-1 -> 2.1.2-2)
    [2010-12-26 16:50] installed gsm (1.0.13-6)
    [2010-12-26 16:50] installed rtmpdump (2.3-3)
    [2010-12-26 16:50] installed libgme (0.5.5-3)
    [2010-12-26 16:50] upgraded gstreamer0.10-bad-plugins (0.10.19-1 -> 0.10.20-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ffmpeg (0.10.10-1 -> 0.10.11-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ugly (0.10.15-5 -> 0.10.16-1)
    [2010-12-26 16:50] upgraded gstreamer0.10-ugly-plugins (0.10.15-5 -> 0.10.16-1)
    [2010-12-26 16:50] upgraded gtk-engine-murrine (0.98.1.1-1 -> 0.98.1.1-2)
    [2010-12-26 16:50] upgraded gtk-vnc (0.3.10-2 -> 0.4.2-2)
    [2010-12-26 16:50] upgraded gvfs (1.6.5-2 -> 1.6.6-1)
    [2010-12-26 16:50] upgraded usbutils (0.90-1 -> 0.91-4)
    [2010-12-26 16:50] upgraded hal (0.5.14-4 -> 0.5.14-5)
    [2010-12-26 16:50] upgraded hyphen (2.6-1 -> 2.7.1-1)
    [2010-12-26 16:50] upgraded icu (4.4.2-1 -> 4.6-1)
    [2010-12-26 16:50] upgraded inetutils (1.8-1 -> 1.8-2)
    [2010-12-26 16:50] upgraded initscripts (2010.07-1 -> 2010.07-2)
    [2010-12-26 16:50] upgraded iptables (1.4.9-1 -> 1.4.10-1)
    [2010-12-26 16:50] upgraded ipw2100-fw (1.3-4 -> 1.3-5)
    [2010-12-26 16:50] upgraded ipw2200-fw (3.1-2 -> 3.1-3)
    [2010-12-26 16:50] upgraded isdn4k-utils (3.2p1-5 -> 3.2p1-6)
    [2010-12-26 16:50] upgraded jfsutils (1.1.14-1 -> 1.1.14-2)
    [2010-12-26 16:50] upgraded linux-firmware (20100911-1 -> 20101108-1)
    [2010-12-26 16:50] >>> Updating module dependencies. Please wait ...
    [2010-12-26 16:50] >>> MKINITCPIO SETUP
    [2010-12-26 16:50] >>> ----------------
    [2010-12-26 16:50] >>> If you use LVM2, Encrypted root or software RAID,
    [2010-12-26 16:50] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2010-12-26 16:50] >>> More information about mkinitcpio setup can be found here:
    [2010-12-26 16:50] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2010-12-26 16:50]
    [2010-12-26 16:50] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2010-12-26 16:50] ==> Building image "default"
    [2010-12-26 16:50] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2010-12-26 16:50] :: Begin build
    [2010-12-26 16:50] :: Parsing hook [base]
    [2010-12-26 16:50] :: Parsing hook [udev]
    [2010-12-26 16:50] :: Parsing hook [autodetect]
    [2010-12-26 16:50] :: Parsing hook [pata]
    [2010-12-26 16:50] :: Parsing hook [scsi]
    [2010-12-26 16:51] :: Parsing hook [sata]
    [2010-12-26 16:51] :: Parsing hook [filesystems]
    [2010-12-26 16:51] :: Generating module dependencies
    [2010-12-26 16:51] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2010-12-26 16:51] ==> SUCCESS
    [2010-12-26 16:51] ==> Building image "fallback"
    [2010-12-26 16:51] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2010-12-26 16:51] :: Begin build
    [2010-12-26 16:51] :: Parsing hook [base]
    [2010-12-26 16:51] :: Parsing hook [udev]
    [2010-12-26 16:51] :: Parsing hook [pata]
    [2010-12-26 16:51] :: Parsing hook [scsi]
    [2010-12-26 16:51] :: Parsing hook [sata]
    [2010-12-26 16:51] :: Parsing hook [filesystems]
    [2010-12-26 16:51] :: Generating module dependencies
    [2010-12-26 16:51] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2010-12-26 16:51] ==> SUCCESS
    [2010-12-26 16:51] upgraded kernel26 (2.6.35.8-1 -> 2.6.36.2-1)
    [2010-12-26 16:51] upgraded less (436-1 -> 436-2)
    [2010-12-26 16:51] upgraded libdvdcss (1.2.10-1.1 -> 1.2.10-2)
    [2010-12-26 16:51] upgraded libgnome (2.32.0-1 -> 2.32.0-3)
    [2010-12-26 16:51] upgraded libgssglue (0.1-2 -> 0.1-3)
    [2010-12-26 16:51] upgraded libmpdclient (2.2-1 -> 2.3-1)
    [2010-12-26 16:51] upgraded libmtp (1.0.2-1 -> 1.0.2-2)
    [2010-12-26 16:51] upgraded libpcap (1.1.1-1 -> 1.1.1-2)
    [2010-12-26 16:51] upgraded libpurple (2.7.5-1 -> 2.7.8-1)
    [2010-12-26 16:51] upgraded libwebkit (1.2.5-1 -> 1.2.5-2)
    [2010-12-26 16:51] upgraded libwpd (0.8.14-1 -> 0.9.0-1)
    [2010-12-26 16:51] upgraded lvm2 (2.02.75-1 -> 2.02.78-1)
    [2010-12-26 16:51] upgraded lzo2 (2.03-1 -> 2.04-1)
    [2010-12-26 16:51] upgraded man-db (2.5.7-1 -> 2.5.9-1)
    [2010-12-26 16:51] upgraded man-pages (3.29-1 -> 3.32-1)
    [2010-12-26 16:51] upgraded me-tv (1.3.4-1 -> 1.3.5-1)
    [2010-12-26 16:51] upgraded mesa (7.8.2-3 -> 7.9.0.git20101207-2)
    [2010-12-26 16:51] upgraded mousetweaks (2.32.0-1 -> 2.32.1-1)
    [2010-12-26 16:51] upgraded mpd (0.15.13-1 -> 0.16-2)
    [2010-12-26 16:51] upgraded mpfr (3.0.0.p4-1 -> 3.0.0.p8-1)
    [2010-12-26 16:52] upgraded nano (2.2.5-1 -> 2.2.6-1)
    [2010-12-26 16:52] upgraded nautilus (2.32.0-1 -> 2.32.2-1)
    [2010-12-26 16:52] module configuration already contains alias directive
    [2010-12-26 16:52]
    [2010-12-26 16:52] upgraded ndiswrapper (1.56-5 -> 1.56-6)
    [2010-12-26 16:52] upgraded wireless_tools (29-3 -> 29-4)
    [2010-12-26 16:52] warning: directory permissions differ on var/lib/NetworkManager/
    filesystem: 755  package: 700
    [2010-12-26 16:52] ATTENTION:
    [2010-12-26 16:52]   /etc/NetworkManager/nm-system-settings.conf has been replaced
    [2010-12-26 16:52]   by /etc/NetworkManager/NetworkManager.conf. Make sure you move
    [2010-12-26 16:52]   any custom settings to the new config file.
    [2010-12-26 16:52] upgraded networkmanager (0.8.1-1 -> 0.8.3-0.20101130)
    [2010-12-26 16:52] upgraded network-manager-applet (0.8.1-2 -> 0.8.2-2)
    [2010-12-26 16:52] upgraded nfsidmap (0.23-3 -> 0.23-4)
    [2010-12-26 16:52] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2010-12-26 16:52] upgraded nvidia (260.19.12-1 -> 260.19.29-1)
    [2010-12-26 16:52] when you use a non-reparenting window manager
    [2010-12-26 16:52] set _JAVA_AWT_WM_NONREPARENTING=1 in
    [2010-12-26 16:52] /etc/profile.d/openjdk6.sh
    [2010-12-26 16:52] upgraded openjdk6 (6.b20_1.9.1-1 -> 6.b20_1.9.3-1)
    [2010-12-26 16:52] upgraded raptor (1.4.21-1 -> 1.4.21-2)
    [2010-12-26 16:52] upgraded rasqal (0.9.20-1 -> 0.9.21-1)
    [2010-12-26 16:52] upgraded redland (1.0.12-2 -> 1.0.12-3)
    [2010-12-26 16:52]  * check /etc/profile.d/openoffice.sh, then relogin or "source" the file
    [2010-12-26 16:52]  * see http://wiki.archlinux.org/index.php/Openoffice
    [2010-12-26 16:52]    how to use extensions, e.g. for spell checking
    [2010-12-26 16:52]    see /usr/lib/openoffice/share/extension/install what
    [2010-12-26 16:52]    is shipped with this package
    [2010-12-26 16:52]  * make sure you have installed a ttf font (ttf-dejavu recommended)
    [2010-12-26 16:52] upgraded openoffice-base (3.2.1-3 -> 3.2.1-4)
    [2010-12-26 16:52] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2010-12-26 16:52] upgraded pacman-mirrorlist (20100825-1 -> 20101223-1)
    [2010-12-26 16:52] upgraded patch (2.6.1-1 -> 2.6.1-2)
    [2010-12-26 16:52] upgraded perl-xml-parser (2.36-7 -> 2.40-1)
    [2010-12-26 16:52] upgraded pidgin (2.7.5-1 -> 2.7.8-1)
    [2010-12-26 16:52] upgraded pilot-link (0.12.5-1 -> 0.12.5-2)
    [2010-12-26 16:52] upgraded pkg-config (0.25-2 -> 0.25-3)
    [2010-12-26 16:52] upgraded poppler-data (0.4.3-1 -> 0.4.4-1)
    [2010-12-26 16:52] upgraded poppler (0.14.4-1 -> 0.14.5-1)
    [2010-12-26 16:52] upgraded poppler-glib (0.14.4-1 -> 0.14.5-1)
    [2010-12-26 16:52] upgraded postgresql-libs (9.0.1-2 -> 9.0.2-2)
    [2010-12-26 16:52] installed python2-cairo (1.8.10-1)
    [2010-12-26 16:52] upgraded python (3.1.2-2 -> 3.1.3-1)
    [2010-12-26 16:52] upgraded python-chardet (2.0.1-2 -> 2.0.1-3)
    [2010-12-26 16:52] installed python2-numpy (1.5.1-1)
    [2010-12-26 16:52] upgraded qt (4.7.0-4 -> 4.7.1-3)
    [2010-12-26 16:52] upgraded recode (3.6-5 -> 3.6-6)
    [2010-12-26 16:52] upgraded reiserfsprogs (3.6.21-2 -> 3.6.21-3)
    [2010-12-26 16:52] upgraded rpcbind (0.2.0-2 -> 0.2.0-3)
    [2010-12-26 16:52] upgraded smbclient (3.5.5-1 -> 3.5.6-1)
    [2010-12-26 16:52] upgraded syslog-ng (3.1.2-1 -> 3.2.1-1)
    [2010-12-26 16:52] upgraded tar (1.23-3 -> 1.25-1)
    [2010-12-26 16:52] upgraded telepathy-glib (0.12.3-1 -> 0.12.7-1)
    [2010-12-26 16:53] upgraded ttf-dejavu (2.30-2 -> 2.32-2)
    [2010-12-26 16:53] upgraded udisks (1.0.1-5 -> 1.0.2-1)
    [2010-12-26 16:53] upgraded unrar (3.9.10-1 -> 4.0.3-1)
    [2010-12-26 16:53] upgraded vino (2.32.0-1 -> 2.32.0-2)
    [2010-12-26 16:53] upgraded zvbi (0.2.33-2 -> 0.2.33-3)
    [2010-12-26 16:53] upgraded vlc (1.1.4.1-2 -> 1.1.5-2)
    [2010-12-26 16:53] upgraded warsow-data (0.5-4 -> 0.6-1)
    [2010-12-26 16:53] upgraded warsow (0.5-4 -> 0.6-3)
    [2010-12-26 16:53] upgraded which (2.20-3 -> 2.20-4)
    [2010-12-26 16:53] upgraded whois (5.0.7-1 -> 5.0.10-1)
    [2010-12-26 16:53] upgraded wireless-regdb (2009.11.25-1 -> 2010.11.24-1)
    [2010-12-26 16:53] upgraded xbitmaps (1.1.0-1 -> 1.1.1-1)
    [2010-12-26 16:53] upgraded xfsprogs (3.1.3-1 -> 3.1.4-1)
    [2010-12-26 16:53] upgraded xinetd (2.3.14-5 -> 2.3.14-6)
    [2010-12-26 16:53] upgraded xorg-docs (1.5-1 -> 1.6-1)
    [2010-12-26 16:53] upgraded xorg-iceauth (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] installed xorg-xdpyinfo (1.2.0-1)
    [2010-12-26 16:53] installed xorg-xdriinfo (1.0.4-1)
    [2010-12-26 16:53] installed xorg-xev (1.1.0-1)
    [2010-12-26 16:53] installed xorg-xlsatoms (1.1.0-1)
    [2010-12-26 16:53] installed xorg-xlsclients (1.1.1-1)
    [2010-12-26 16:53] installed xorg-xprop (1.2.0-1)
    [2010-12-26 16:53] installed xorg-xvinfo (1.1.1-1)
    [2010-12-26 16:53] installed xorg-xwininfo (1.1.1-1)
    [2010-12-26 16:53] upgraded xorg-utils (7.6-5 -> 7.6-6)
    [2010-12-26 16:53] upgraded xorg-xauth (1.0.4-1 -> 1.0.5-1)
    [2010-12-26 16:53] upgraded xorg-xbacklight (1.1.1-1 -> 1.1.2-1)
    [2010-12-26 16:53] upgraded xorg-xgamma (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xhost (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xinit (1.2.1-1 -> 1.3.0-2)
    [2010-12-26 16:53] upgraded xorg-xinput (1.5.2-1 -> 1.5.3-1)
    [2010-12-26 16:53] upgraded xorg-xkill (1.0.2-1 -> 1.0.3-1)
    [2010-12-26 16:53] upgraded xorg-xrandr (1.3.3-1 -> 1.3.4-1)
    [2010-12-26 16:53] upgraded xorg-xrdb (1.0.6-1 -> 1.0.7-1)
    [2010-12-26 16:53] upgraded xorg-xrefresh (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xset (1.2.0-1 -> 1.2.1-1)
    [2010-12-26 16:53] upgraded xorg-xsetroot (1.0.3-1 -> 1.1.0-1)
    [2010-12-26 16:53] upgraded xorg-xwd (1.0.3-1 -> 1.0.4-1)
    [2010-12-26 16:53] upgraded xorg-xwud (1.0.2-1 -> 1.0.3-1)
    [2010-12-26 16:53] upgraded xterm (266-1 -> 267-1)
    [2010-12-26 16:53] upgraded zenity (2.32.0-1 -> 2.32.1-1)
    [2010-12-28 17:36] Running 'pacman -Stu'
    [2010-12-28 17:36] starting full system upgrade
    [2010-12-28 17:36] Running 'pacman -Syu'
    [2010-12-28 17:36] synchronizing package lists
    [2010-12-28 17:36] starting full system upgrade
    [2010-12-28 17:37] upgraded libpurple (2.7.8-1 -> 2.7.9-1)
    [2010-12-28 17:37] upgraded pidgin (2.7.8-1 -> 2.7.9-1)
    [2010-12-29 23:49] Running 'pacman -S openntp'
    [2010-12-29 23:49] Running 'pacman -S openntpd'
    [2010-12-29 23:49] adding new group: ntp
    [2010-12-29 23:49] adding new user: ntp
    [2010-12-29 23:49] installed openntpd (3.9p1-13)
    [2010-12-31 17:57] Running 'pacman -Syu'
    [2010-12-31 17:57] synchronizing package lists
    [2010-12-31 17:57] starting full system upgrade
    [2010-12-31 18:03] upgraded linux-api-headers (2.6.34-1 -> 2.6.36.2-1)
    [2010-12-31 18:03] Generating locales...
    [2010-12-31 18:03]   en_GB.UTF-8... done
    [2010-12-31 18:03]   en_US.UTF-8... done
    [2010-12-31 18:03]   en_US.ISO-8859-1... done
    [2010-12-31 18:03] Generation complete.
    [2010-12-31 18:03] upgraded glibc (2.12.1-4 -> 2.12.2-1)
    [2010-12-31 18:03] upgraded binutils (2.20.1-4 -> 2.21-2)
    [2010-12-31 18:03] upgraded gcc (4.5.1-2 -> 4.5.2-3)
    [2010-12-31 18:03] upgraded gcc-libs (4.5.1-2 -> 4.5.2-3)
    [2010-12-31 18:03] upgraded hyphen (2.7.1-1 -> 2.7.1-2)
    [2010-12-31 18:03] upgraded libwebkit (1.2.5-2 -> 1.2.6-1)
    [2010-12-31 18:03] upgraded nautilus (2.32.2-1 -> 2.32.2.1-1)
    [2010-12-31 18:03] upgraded twisted (10.2.0-1 -> 10.2.0-2)
    [2010-12-31 18:03] upgraded xulrunner (1.9.2.13-2 -> 1.9.2.13-3)
    [2011-01-01 00:31] Running 'pacman -S dhcpcd'
    [2011-01-01 00:35] Running 'pacman -Rns dhcpcd'
    [2011-01-01 00:36] Running 'pacman -Rns networkmanager'
    [2011-01-01 00:36] Running 'pacman -Rns network-manager-applet'
    [2011-01-01 00:36] removed network-manager-applet (0.8.2-2)
    [2011-01-01 00:36] removed mobile-broadband-provider-info (20100510-1)
    [2011-01-01 00:36] Running 'pacman -Rns networkmanager'
    [2011-01-01 00:36] removed networkmanager (0.8.3-0.20101130)
    [2011-01-01 00:36] Running 'pacman -Rns netcfg'
    [2011-01-01 00:36] removed netcfg (2.5.4-1)
    [2011-01-07 19:27] Running 'pacman -Syu'
    [2011-01-07 19:27] synchronizing package lists
    [2011-01-07 19:28] upgraded pacman (3.4.1-1 -> 3.4.2-1)
    [2011-01-07 19:28] Running 'pacman -Syu'
    [2011-01-07 19:28] synchronizing package lists
    [2011-01-07 19:28] starting full system upgrade
    [2011-01-07 19:34] upgraded atkmm (2.22.1-1 -> 2.22.1-2)
    [2011-01-07 19:34] upgraded bluez (4.82-1 -> 4.84-1)
    [2011-01-07 19:34] upgraded cairo (1.10.0-2 -> 1.10.2-1)
    [2011-01-07 19:34] upgraded cloog-ppl (0.15.9-2 -> 0.15.10-2)
    [2011-01-07 19:34] upgraded pam (1.1.1-2 -> 1.1.3-1)
    [2011-01-07 19:34] upgraded coreutils (8.7-1 -> 8.8-1)
    [2011-01-07 19:34] upgraded pciutils (3.1.7-1 -> 3.1.7-2)
    [2011-01-07 19:34] upgraded udev (164-3 -> 165-1)
    [2011-01-07 19:34] upgraded device-mapper (2.02.78-1 -> 2.02.79-1)
    [2011-01-07 19:34] upgraded cryptsetup (1.1.3-1 -> 1.2.0-1)
    [2011-01-07 19:34] upgraded e2fsprogs (1.41.12-1 -> 1.41.14-1)
    [2011-01-07 19:34] upgraded elfutils (0.149-2 -> 0.150-1)
    [2011-01-07 19:34] upgraded gcc (4.5.2-3 -> 4.5.2-4)
    [2011-01-07 19:34] upgraded gcc-libs (4.5.2-3 -> 4.5.2-4)
    [2011-01-07 19:34] upgraded gnome-media (2.32.0-2 -> 2.32.0-3)
    [2011-01-07 19:34] upgraded groff (1.20.1-4 -> 1.21-1)
    [2011-01-07 19:34] upgraded hunspell (1.2.12-1 -> 1.2.14-1)
    [2011-01-07 19:34] upgraded libcups (1.4.5-2 -> 1.4.6-1)
    [2011-01-07 19:34] upgraded libmysqlclient (5.1.51-1 -> 5.1.54-1)
    [2011-01-07 19:34] upgraded libtool (2.4-1 -> 2.4-2)
    [2011-01-07 19:34] upgraded lvm2 (2.02.78-1 -> 2.02.79-1)
    [2011-01-07 19:34] upgraded python2 (2.7.1-3 -> 2.7.1-4)
    [2011-01-07 19:34] Updating font cache... done.
    [2011-01-07 19:34] upgraded ttf-freefont (20090104-2 -> 20100919-1)
    [2011-01-08 20:14] Running 'pacman -Sy'
    [2011-01-08 20:14] synchronizing package lists
    [2011-01-08 20:16] Running 'pacman -Sy'
    [2011-01-08 20:16] synchronizing package lists
    [2011-01-08 20:18] Running 'pacman -Sy'
    [2011-01-08 20:18] synchronizing package lists
    [2011-01-08 20:22] Running 'pacman -S kernal26'
    [2011-01-08 20:22] Running 'pacman -S kernel26'
    [2011-01-08 20:25] Running 'pacman -Sn kernel26'
    [2011-01-08 20:26] Running 'pacman -S kernel26 ndiswrapper'
    [2011-01-08 20:26] Running 'pacman -S kernel26 ndiswrapper nvidia'
    [2011-01-08 20:29] >>> Updating module dependencies. Please wait ...
    [2011-01-08 20:29] >>> MKINITCPIO SETUP
    [2011-01-08 20:29] >>> ----------------
    [2011-01-08 20:29] >>> If you use LVM2, Encrypted root or software RAID,
    [2011-01-08 20:29] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2011-01-08 20:29] >>> More information about mkinitcpio setup can be found here:
    [2011-01-08 20:29] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2011-01-08 20:29]
    [2011-01-08 20:29] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2011-01-08 20:29] ==> Building image "default"
    [2011-01-08 20:29] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2011-01-08 20:29] :: Begin build
    [2011-01-08 20:29] :: Parsing hook [base]
    [2011-01-08 20:29] :: Parsing hook [udev]
    [2011-01-08 20:29] :: Parsing hook [autodetect]
    [2011-01-08 20:29] :: Parsing hook [pata]
    [2011-01-08 20:29] :: Parsing hook [scsi]
    [2011-01-08 20:29] :: Parsing hook [sata]
    [2011-01-08 20:29] :: Parsing hook [filesystems]
    [2011-01-08 20:29] :: Generating module dependencies
    [2011-01-08 20:29] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2011-01-08 20:29] ==> SUCCESS
    [2011-01-08 20:29] ==> Building image "fallback"
    [2011-01-08 20:29] ==> Running command: /sbin/mkinitcpio -k 2.6.37-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2011-01-08 20:29] :: Begin build
    [2011-01-08 20:29] :: Parsing hook [base]
    [2011-01-08 20:29] :: Parsing hook [udev]
    [2011-01-08 20:29] :: Parsing hook [pata]
    [2011-01-08 20:29] :: Parsing hook [scsi]
    [2011-01-08 20:29] :: Parsing hook [sata]
    [2011-01-08 20:29] :: Parsing hook [filesystems]
    [2011-01-08 20:29] :: Generating module dependencies
    [2011-01-08 20:30] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2011-01-08 20:30] ==> SUCCESS
    [2011-01-08 20:30] upgraded kernel26 (2.6.36.2-1 -> 2.6.37-1)
    [2011-01-08 20:30] module configuration already contains alias directive
    [2011-01-08 20:30]
    [2011-01-08 20:30] upgraded ndiswrapper (1.56-6 -> 1.56-7)
    [2011-01-08 20:30] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2011-01-08 20:30] upgraded nvidia (260.19.29-1 -> 260.19.29-2)
    [2011-01-09 22:54] Running 'pacman -S kernel26 2.6.36.2-1'
    [2011-01-09 22:55] Running 'pacman -S kernel26 2.6.36.2-1'
    [2011-01-09 22:55] Running 'pacman -Rns kernel26 2.6.37-1'
    [2011-01-09 22:57] Running 'pacman -Rns testing/kernel26 2.6.37-1'
    [2011-01-09 22:57] Running 'pacman -Rns /testing/kernel26 2.6.37-1'
    [2011-01-09 22:58] Running 'pacman -Rns testing/kernel26'
    [2011-01-09 22:58] Running 'pacman -Rns kernel26'
    [2011-01-09 23:00] Running 'pacman -Rns kernel26 2.6.37'
    [2011-01-09 23:00] Running 'pacman -Rns kernel26=2.6.37'
    [2011-01-09 23:01] Running 'pacman -S kernel26'
    [2011-01-09 23:01] Running 'pacman -S kernel26 nvidia ndiswrapper'
    [2011-01-09 23:02] >>> Updating module dependencies. Please wait ...
    [2011-01-09 23:02] >>> MKINITCPIO SETUP
    [2011-01-09 23:02] >>> ----------------
    [2011-01-09 23:02] >>> If you use LVM2, Encrypted root or software RAID,
    [2011-01-09 23:02] >>> Ensure you enable support in /etc/mkinitcpio.conf .
    [2011-01-09 23:02] >>> More information about mkinitcpio setup can be found here:
    [2011-01-09 23:02] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
    [2011-01-09 23:02]
    [2011-01-09 23:02] >>> Generating initial ramdisk, using mkinitcpio.  Please wait...
    [2011-01-09 23:02] ==> Building image "default"
    [2011-01-09 23:02] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
    [2011-01-09 23:02] :: Begin build
    [2011-01-09 23:02] :: Parsing hook [base]
    [2011-01-09 23:02] :: Parsing hook [udev]
    [2011-01-09 23:02] :: Parsing hook [autodetect]
    [2011-01-09 23:02] :: Parsing hook [pata]
    [2011-01-09 23:02] :: Parsing hook [scsi]
    [2011-01-09 23:02] :: Parsing hook [sata]
    [2011-01-09 23:02] :: Parsing hook [filesystems]
    [2011-01-09 23:02] :: Generating module dependencies
    [2011-01-09 23:02] :: Generating image '/boot/kernel26.img'...SUCCESS
    [2011-01-09 23:02] ==> SUCCESS
    [2011-01-09 23:02] ==> Building image "fallback"
    [2011-01-09 23:02] ==> Running command: /sbin/mkinitcpio -k 2.6.36-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
    [2011-01-09 23:02] :: Begin build
    [2011-01-09 23:02] :: Parsing hook [base]
    [2011-01-09 23:02] :: Parsing hook [udev]
    [2011-01-09 23:02] :: Parsing hook [pata]
    [2011-01-09 23:02] :: Parsing hook [scsi]
    [2011-01-09 23:02] :: Parsing hook [sata]
    [2011-01-09 23:02] :: Parsing hook [filesystems]
    [2011-01-09 23:02] :: Generating module dependencies
    [2011-01-09 23:03] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
    [2011-01-09 23:03] ==> SUCCESS
    [2011-01-09 23:03] upgraded kernel26 (2.6.37-1 -> 2.6.36.2-1)
    [2011-01-09 23:03] In order to use the new nvidia module, exit Xserver and unload it manually.
    [2011-01-09 23:03] upgraded nvidia (260.19.29-2 -> 260.19.29-1)
    [2011-01-09 23:03] module configuration already contains alias directive
    [2011-01-09 23:03]
    [2011-01-09 23:03] upgraded ndiswrapper (1.56-7 -> 1.56-6)
    I'm also going to run some hardware tests after work just to double check that all my hardware is functioning as it should so that will eliminate another potential cause.
    If downgrading Udev to 164-3 doesn't solve the problem, i will try your version of it Daniel. And if that fails ill try downgrading the kernel to 2.6.35 or something and see if that solves it.
    Sorry for the super long post,
    Thanks again for your help.
    Scott.
    Last edited by ScottWilson1990 (2011-01-10 11:51:17)

  • [SOLVED] Broken setup after upgrading to 2.6.29

    I am running a x86_64 system.
    I have been running kernel26-2.6.28.7-2 for a while now. Upgrade to kernel26-2.6.28.8-1 caused some problem for me so I installed the older version from /var/cache/pacman/pkg/. After upgrading day before yesterday to 2.6.29.1, I can boot and login to the system but pretty much nothing works. The obvious problem that I can find out is that everyting is trying to load modules from 2.6.28-ARCH. After logging in even 'uname -r' reports 2.6.28-ARCH. I do have the /lib/modules/2.6.29-ARCH folder with all the modules.
    Any help will be much appreciated. I can provide further information if required. Thank you.
    Last edited by partha (2009-04-20 03:13:17)

    I was able to solve it. The problem was I was using grub installed from Ubuntu. So, there was some problem loading the kernel. Installing grub from arch fixed it. Thanks.

  • [solved] dhcpcd problem after upgrading to 6.0.4/6.0.5

    I cant access any network after upgrading to 6.0.4 or 6.0.5.
    Im using the Linux-Kernel 3.10.3.
    Does anyone have the same problem?
    Downgrading to 5.6.8 solved this problem.
    Here is the output of dhcpcd and wpa_supplicant:
    dhcpcd[28734]: version 6.0.4 starting
    dhcpcd[28742]: wlan0: starting wpa_supplicant
    dhcpcd[28734]: eth0: waiting for carrier
    dhcpcd[28734]: wlan0: waiting for carrier
    dhcpcd[28734]: wlan0: carrier acquired
    dhcpcd[28734]: wlan0: soliciting an IPv6 router
    dhcpcd[28734]: wlan0: rebinding lease of 192.168.0.104
    dhcpcd[28734]: wlan0: soliciting a DHCP lease
    dhcpcd[28734]: wlan0: carrier lost
    dhcpcd[28734]: wlan0: carrier acquired
    dhcpcd[28734]: wlan0: soliciting an IPv6 router
    dhcpcd[28734]: wlan0: rebinding lease of 192.168.0.104
    dhcpcd[28734]: wlan0: leased 192.168.0.104 for 86400 seconds
    dhcpcd[28734]: wlan0: adding host route to 192.168.0.104 via 127.0.0.1
    dhcpcd[28734]: wlan0: adding route to 192.168.0.0/24
    dhcpcd[28734]: wlan0: adding default route via 192.168.0.1
    dhcpcd[28734]: forked to background, child pid 28849
    Successfully initialized wpa_supplicant
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: WPA: Key negotiation completed with f8:df:a8:33:0e:7f [PTK=TKIP GTK=TKIP]
    wlan0: CTRL-EVENT-CONNECTED - Connection to f8:df:a8:33:0e:7f completed [id=2 id_str=]
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    wlan0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    wlan0: WPA: Invalid EAPOL-Key MIC when using TPTK - ignoring TPTK
    wlan0: WPA: Could not verify EAPOL-Key MIC - dropping packet
    wlan0: Authentication with f8:df:a8:33:0e:7f timed out.
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: WPA: 4-Way Handshake failed - pre-shared key may be incorrect
    wlan0: CTRL-EVENT-SSID-TEMP-DISABLED id=2 ssid="VHC" auth_failures=1 duration=10
    wlan0: Failed to initiate AP scan
    wlan0: Failed to initiate AP scan
    wlan0: Failed to initiate AP scan
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: Failed to initiate AP scan
    wlan0: Failed to initiate AP scan
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: CTRL-EVENT-SSID-REENABLED id=2 ssid="VHC"
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: WPA: Key negotiation completed with f8:df:a8:33:0e:7f [PTK=TKIP GTK=TKIP]
    wlan0: CTRL-EVENT-CONNECTED - Connection to f8:df:a8:33:0e:7f completed [id=2 id_str=]
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    wlan0: SME: Trying to authenticate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Trying to associate with f8:df:a8:33:0e:7f (SSID='VHC' freq=2452 MHz)
    wlan0: Associated with f8:df:a8:33:0e:7f
    wlan0: CTRL-EVENT-DISCONNECTED bssid=f8:df:a8:33:0e:7f reason=3 locally_generated=1
    dbus: wpas_dbus_bss_signal_prop_changed: Unknown Property value 7
    Edit:
    I reported this.
    Last edited by rosenrot (2013-08-08 13:35:18)

    rosenrot wrote:I solved it with downgrading, I think its a Bug.
    1. Not exactly a solution, more like a temporary workaround.
    2. Please open a bug report, although dhcpcd 6.0.5-1 works fine for me.
    3. When pasting configs, code or command output, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
    like this
    It makes the code more readable and - in case of longer listings - more convenient to scroll through.

  • Kernel error on startx after upgrade to kernel 3.0

    After upgrading i can no longer start X. The screen turns black and the computer does not respond to input, I am however able to login using ssh.
    The system is a intel atom cpu and nvidia ion gpu using the nvidia driver.
    I'll be thankfull for any help.
    The output from dmesg is
    [ 179.200661] BUG: unable to handle kernel paging request at ffffffffa027d738
    [ 179.200674] IP: [<ffffffff8122104b>] strnlen+0xb/0x30
    [ 179.200689] PGD 1695067 PUD 1699063 PMD 5baf2067 PTE 0
    [ 179.200700] Oops: 0000 [#1] PREEMPT SMP
    [ 179.200710] CPU 1
    [ 179.200713] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
    [ 179.200798]
    [ 179.200804] Pid: 1029, comm: X Tainted: P C 3.0-ARCH #1 To Be Filled By O.E.M. To Be Filled By O.E.M./To be filled by O.E.M.
    [ 179.200816] RIP: 0010:[<ffffffff8122104b>] [<ffffffff8122104b>] strnlen+0xb/0x30
    [ 179.200827] RSP: 0018:ffff88002f549c98 EFLAGS: 00010086
    [ 179.200832] RAX: 0000000000000000 RBX: ffff88005c2590bf RCX: 0000000000000000
    [ 179.200838] RDX: ffffffffa027d738 RSI: ffffffffffffffff RDI: ffffffffa027d738
    [ 179.200844] RBP: ffff88002f549c98 R08: 000000000000ffff R09: 000000000000ffff
    [ 179.200850] R10: 0000000000000000 R11: 0000000000000000 R12: ffffffffa027d738
    [ 179.200855] R13: ffff88005c25a000 R14: 0000000000000000 R15: 000000000000ffff
    [ 179.200862] FS: 00007f1fe8c2a880(0000) GS:ffff88005fc80000(0000) knlGS:0000000000000000
    [ 179.200869] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
    [ 179.200874] CR2: ffffffffa027d738 CR3: 000000002f57c000 CR4: 00000000000006e0
    [ 179.200880] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
    [ 179.200886] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
    [ 179.200892] Process X (pid: 1029, threadinfo ffff88002f548000, task ffff88005c3fa3f0)
    [ 179.200897] Stack:
    [ 179.200901] ffff88002f549cd8 ffffffff812232de 0000000000000000 ffff88005c2590bf
    [ 179.200913] ffffffff814d27cd ffff88002f549d70 ffffffff814d27cd ffff88005c25a000
    [ 179.200924] ffff88002f549d58 ffffffff81224389 000000002f54ffff 0000000000000000
    [ 179.200934] Call Trace:
    [ 179.200946] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
    [ 179.200955] [<ffffffff81224389>] vsnprintf+0x219/0x620
    [ 179.200966] [<ffffffff81178c98>] seq_printf+0x58/0x90
    [ 179.200980] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
    [ 179.200989] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
    [ 179.200998] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
    [ 179.201006] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
    [ 179.201016] [<ffffffff8115793c>] vfs_read+0xac/0x180
    [ 179.201023] [<ffffffff81157a5a>] sys_read+0x4a/0x90
    [ 179.201033] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
    [ 179.201039] Code: 31 c0 80 3f 00 55 48 89 e5 74 11 48 89 f8 66 90 48 83 c0 01 80 38 00 75 f7 48 29 f8 5d c3 66 90 55 31 c0 48 85 f6 48 89 e5 74 23
    [ 179.201091] 3f 00 74 1e 48 89 f8 eb 0c 0f 1f 00 48 83 ee 01 80 38 00 74
    [ 179.201117] RIP [<ffffffff8122104b>] strnlen+0xb/0x30
    [ 179.201126] RSP <ffff88002f549c98>
    [ 179.201130] CR2: ffffffffa027d738
    [ 179.201136] ---[ end trace 700eca34042d7ef4 ]---
    [ 179.201144] note: X[1029] exited with preempt_count 1
    [ 179.204777] BUG: scheduling while atomic: X/1029/0x10000002
    [ 179.204789] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
    [ 179.204946] Pid: 1029, comm: X Tainted: P D C 3.0-ARCH #1
    [ 179.204955] Call Trace:
    [ 179.204979] [<ffffffff813ea533>] __schedule_bug+0x5f/0x64
    [ 179.204994] [<ffffffff813f09e1>] schedule+0x831/0x9f0
    [ 179.205009] [<ffffffff813f39a2>] ? tty_unlock+0x32/0x50
    [ 179.205026] [<ffffffff8116d7ac>] ? d_free+0x4c/0x70
    [ 179.205041] [<ffffffff81174c0d>] ? vfsmount_lock_local_unlock+0x3d/0x50
    [ 179.205056] [<ffffffff81175db0>] ? mntput_no_expire+0x30/0xe0
    [ 179.205069] [<ffffffff81175e7f>] ? mntput+0x1f/0x30
    [ 179.205083] [<ffffffff8115925f>] ? fput+0x16f/0x210
    [ 179.205098] [<ffffffff8105351a>] __cond_resched+0x2a/0x40
    [ 179.205111] [<ffffffff813f0e22>] _cond_resched+0x32/0x40
    [ 179.205126] [<ffffffff81060005>] put_files_struct+0xa5/0x110
    [ 179.205140] [<ffffffff81060132>] exit_files+0x52/0x60
    [ 179.205153] [<ffffffff8106063a>] do_exit+0x18a/0x8f0
    [ 179.205167] [<ffffffff8105e441>] ? kmsg_dump+0xb1/0xe0
    [ 179.205183] [<ffffffff8100f35a>] oops_end+0xaa/0xf0
    [ 179.205210] [<ffffffff813ea099>] no_context+0x209/0x218
    [ 179.205231] [<ffffffff813ea236>] __bad_area_nosemaphore+0x18e/0x1b1
    [ 179.205245] [<ffffffff813f0e76>] ? preempt_schedule+0x46/0x60
    [ 179.205259] [<ffffffff813f34f0>] ? _raw_spin_unlock_irqrestore+0x10/0x40
    [ 179.205279] [<ffffffff813ea26c>] bad_area_nosemaphore+0x13/0x15
    [ 179.205294] [<ffffffff81039b1c>] do_page_fault+0x3ec/0x4d0
    [ 179.205310] [<ffffffff81317ca3>] ? pci_conf1_read+0xc3/0x120
    [ 179.205327] [<ffffffff8108292f>] ? __mutex_init+0x2f/0x40
    [ 179.205341] [<ffffffff81171103>] ? inode_init_always+0x113/0x1d0
    [ 179.205355] [<ffffffff811b17ff>] ? proc_alloc_inode+0x6f/0xb0
    [ 179.205369] [<ffffffff8107f247>] ? bit_waitqueue+0x17/0xd0
    [ 179.205389] [<ffffffff813f3e45>] page_fault+0x25/0x30
    [ 179.205417] [<ffffffff8122104b>] ? strnlen+0xb/0x30
    [ 179.205431] [<ffffffff813f217e>] ? mutex_unlock+0xe/0x10
    [ 179.205444] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
    [ 179.205458] [<ffffffff81224389>] vsnprintf+0x219/0x620
    [ 179.205474] [<ffffffff81178c98>] seq_printf+0x58/0x90
    [ 179.205494] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
    [ 179.205510] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
    [ 179.205525] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
    [ 179.205539] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
    [ 179.205552] [<ffffffff8115793c>] vfs_read+0xac/0x180
    [ 179.205566] [<ffffffff81157a5a>] sys_read+0x4a/0x90
    [ 179.205581] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
    [ 179.205823] BUG: scheduling while atomic: X/1029/0x10000002
    [ 179.205832] Modules linked in: appletalk ipx p8022 psnap llc p8023 ipv6 fuse ext2 nvidia(P) snd_hda_codec_hdmi snd_hda_codec_realtek snd_hda_intel snd_hda_codec snd_hwdep snd_pcm joydev evdev shpchp snd_timer snd soundcore snd_page_alloc forcedeth pci_hotplug i2c_nforce2 psmouse serio_raw pcspkr i2c_core wmi button processor autofs4 lirc_dev ext4 mbcache jbd2 crc16 hid_logitech ff_memless usbhid hid sg sr_mod cdrom sd_mod ata_generic pata_acpi ohci_hcd ahci libahci libata ehci_hcd scsi_mod usbcore
    [ 179.205988] Pid: 1029, comm: X Tainted: P D C 3.0-ARCH #1
    [ 179.205996] Call Trace:
    [ 179.206016] [<ffffffff813ea533>] __schedule_bug+0x5f/0x64
    [ 179.206031] [<ffffffff813f09e1>] schedule+0x831/0x9f0
    [ 179.206052] [<ffffffff81099cf5>] ? module_put+0x115/0x130
    [ 179.206067] [<ffffffff81174c0d>] ? vfsmount_lock_local_unlock+0x3d/0x50
    [ 179.206082] [<ffffffff81175db0>] ? mntput_no_expire+0x30/0xe0
    [ 179.206096] [<ffffffff81175e7f>] ? mntput+0x1f/0x30
    [ 179.206110] [<ffffffff8115925f>] ? fput+0x16f/0x210
    [ 179.206125] [<ffffffff8105351a>] __cond_resched+0x2a/0x40
    [ 179.206137] [<ffffffff813f0e22>] _cond_resched+0x32/0x40
    [ 179.206151] [<ffffffff81060005>] put_files_struct+0xa5/0x110
    [ 179.206163] [<ffffffff81060132>] exit_files+0x52/0x60
    [ 179.206174] [<ffffffff8106063a>] do_exit+0x18a/0x8f0
    [ 179.206186] [<ffffffff8105e441>] ? kmsg_dump+0xb1/0xe0
    [ 179.206202] [<ffffffff8100f35a>] oops_end+0xaa/0xf0
    [ 179.206227] [<ffffffff813ea099>] no_context+0x209/0x218
    [ 179.206248] [<ffffffff813ea236>] __bad_area_nosemaphore+0x18e/0x1b1
    [ 179.206262] [<ffffffff813f0e76>] ? preempt_schedule+0x46/0x60
    [ 179.206277] [<ffffffff813f34f0>] ? _raw_spin_unlock_irqrestore+0x10/0x40
    [ 179.206297] [<ffffffff813ea26c>] bad_area_nosemaphore+0x13/0x15
    [ 179.206312] [<ffffffff81039b1c>] do_page_fault+0x3ec/0x4d0
    [ 179.206328] [<ffffffff81317ca3>] ? pci_conf1_read+0xc3/0x120
    [ 179.206345] [<ffffffff8108292f>] ? __mutex_init+0x2f/0x40
    [ 179.206359] [<ffffffff81171103>] ? inode_init_always+0x113/0x1d0
    [ 179.206373] [<ffffffff811b17ff>] ? proc_alloc_inode+0x6f/0xb0
    [ 179.206387] [<ffffffff8107f247>] ? bit_waitqueue+0x17/0xd0
    [ 179.206407] [<ffffffff813f3e45>] page_fault+0x25/0x30
    [ 179.206434] [<ffffffff8122104b>] ? strnlen+0xb/0x30
    [ 179.206448] [<ffffffff813f217e>] ? mutex_unlock+0xe/0x10
    [ 179.206462] [<ffffffff812232de>] string.isra.5+0x3e/0xd0
    [ 179.206477] [<ffffffff81224389>] vsnprintf+0x219/0x620
    [ 179.206494] [<ffffffff81178c98>] seq_printf+0x58/0x90
    [ 179.206514] [<ffffffff810c35ab>] show_interrupts+0x25b/0x310
    [ 179.206529] [<ffffffff8117906e>] seq_read+0x29e/0x3d0
    [ 179.206544] [<ffffffff81178dd0>] ? seq_lseek+0x100/0x100
    [ 179.206558] [<ffffffff811b1fb3>] proc_reg_read+0x83/0xc0
    [ 179.206573] [<ffffffff8115793c>] vfs_read+0xac/0x180
    [ 179.206586] [<ffffffff81157a5a>] sys_read+0x4a/0x90
    [ 179.206601] [<ffffffff813f4402>] system_call_fastpath+0x16/0x1b
    [ 179.207627] NVRM: os_flush_work_queue: attempted to execute passivework from an atomic or interrupt context.
    [ 179.229435] NVRM: VM: nv_kern_close:2097: 0xffff88005bfd40c0, 11 page(s), count = 1, flags = 0x00000011, 0x000000005b0fd000, 0xffff88005bfd42a0
    Edit: Downgraded to kernel26-2.6.39.1-1-x86_64.pkg.tar.xz nvidia-275.09.07-1-x86_64.pkg.tar.xz nvidia-utils-275.09.07-1-x86_64.pkg.tar.xz   lirc-1\:0.9.0-4-x86_64.pkg.tar.xz and things work again.
    Last edited by eirikst (2011-08-28 16:19:44)

    The A-GPS needs to have direct line of sight to a satellite such as when standing outside or mounted on the dash of an automobile. If indoors the A-GPS will use triangulation with the nearest three cellular towers to pinpoint your approximate location. I haven't had any issue using A-GPS while driving or walking with Google Maps. As for third party apps this has nothing to do with Apple and the 3.0 firmware but does have to do with the developers of those third party apps you're having problems with. Suggest contacting the developer of said apps through the iTunes app store feedback link for each app. This way if the app isn't updated in a timely manner Apple will pull it from the app store until the developer can provide an update for their customers such as yourself. It's sort of like running OS X or Windows on your desktop where you wouldn't file a complaint to Apple (OS X) or Microsoft (Windows) when one of your third party applications starts experiencing issues.

  • [solved] Black screen after upgrade

    Hi, I upgraded arch on my old laptop about a week ago and after reboot all I got was a black screen. The problem is ctrl+alt+backspace doesn't do anything, nor does ctrl+alt+f*. So I tried to boot using "arch fallback" and my own arch runlevel 3 grub entry, but got the same problem - I can see the text running during boot, but at some point I get a black screen. I already downloaded puppy linux, but I have no idea where to look. I looked in x.org.log and found a warning about fbdev not found, but I thought I don't need that anyway because afaik xorg was using the intel module, I'm not sure however, because I used hardware auto detection. Without being able to boot I have no idea if there is any way to install it. Thanks in advance for your help.
    Last edited by Vozka (2010-01-26 17:48:53)

    I'm guessing you have an Intel graphic card. You can try the following to deactivate KMS which is now default for Intel graphics cards:
    You can add "i915.modeset=0" to your kernel options in your grub config. This may, however, result in a hard crash on starting X. Maybe this helps, but this is only a workaround. KMS will be the only way in the future (upstream choice).
    EDIT:
    News item is here: http://www.archlinux.org/news/477/
    As I have seen from your pacman.log you have upgrade the kernel to .32, so I think my advice should help.
    Last edited by ise (2010-01-26 14:31:24)

  • [Solved] Boot failure after upgrade to udev 0.84

    After upgrading my system it no longer boot properly.
    The kernel boots fine. Initrd executes and the normal init starts.
    First of is the start of udev. This starts and immediately complains that nss_ldap is unable to contact the ldap server. Not very strange when networking isn't started yet.
    After a little while and a few repetitions of the nss_ldap error message udev says its done.
    After this activating swap fails but mounting Root readonly succeds. After this init proceeds with "Checking file system". This fails miserably saying "no such file or directory /dev/sda3" which is the previously mounted root filesystem.
    It seems like udev gets busy when not able to connect to the ldap server and hence doesn't create the device nodes for my harddrive in time.
    Because the check of the filesystem fails i end up on a rescue prompt. And when logging in to that and check /dev the sda* nodes are there.
    Does anyone have a clue on how udev depends on nss_ldap? Any other thought on whats going on?

    Ok, after some investigation it turns out that it seems like udev starts a few /sbin/vol_id on the disks/partitions attached. These processes in turn triggered nss_ldap which couldnt connect to the remote ldap server due to network not being up.
    I have a less than beautiful solution to the problem. Altering nss_ldap to do soft binds instead of the default that is hard binding. When using hard bind and connect fails it uses an exponential backoff and tries again a little later. Changing to soft bind makes nss_ldap returning immediately when failing.
    To  change this edit  /etc/nss_ldap.conf and change the line saying something like
    #bind_policy hard
    to
    bind_policy soft
    This at least helped me getting a system that boots again.

  • Hangs during boot after upgrading to Kernel 2.6.39

    I have just installed Arch on a new computer. It works fine until I upgrade to Kernel 2.6.39. After that it hangs on boot.
    The end of /var/log/everything.log is posted below.
    Jul 26 23:52:06 localhost kernel: [ 6.036766] [drm] nouveau 0000:04:00.0: Parsing VBIOS init table at offset 0x85F3
    Jul 26 23:52:06 localhost kernel: [ 6.129046] adt7475 1-002e: ADT7473 device, revision 1
    Jul 26 23:52:06 localhost kernel: [ 6.138997] [drm] nouveau 0000:04:00.0: Detected monitoring device: adt7473
    Jul 26 23:52:06 localhost kernel: [ 6.139000] [drm] nouveau 0000:04:00.0: 1 available performance level(s)
    Jul 26 23:52:06 localhost kernel: [ 6.139002] [drm] nouveau 0000:04:00.0: 0: memory 405MHz core 270MHz shader 540MHz
    Jul 26 23:52:06 localhost kernel: [ 6.139233] [TTM] Zone kernel: Available graphics memory: 12371030 kiB.
    Jul 26 23:52:06 localhost kernel: [ 6.139236] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
    Jul 26 23:52:06 localhost kernel: [ 6.139238] [TTM] Initializing pool allocator.
    Jul 26 23:52:06 localhost kernel: [ 6.139252] [drm] nouveau 0000:04:00.0: Detected 5376MiB VRAM
    Jul 26 23:52:06 localhost kernel: [ 6.139260] mtrr: type mismatch for d0000000,8000000 old: write-back new: write-combining
    Jul 26 23:52:06 localhost kernel: [ 6.150626] [drm] nouveau 0000:04:00.0: 512 MiB GART (aperture)
    Jul 26 23:52:06 localhost kernel: [ 6.152371] [drm] nouveau 0000:04:00.0: failed to load fuc409d
    Jul 26 23:52:06 localhost kernel: [ 6.176193] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    Jul 26 23:52:06 localhost kernel: [ 6.176195] [drm] No driver support for vblank timestamp query.
    Jul 26 23:52:06 localhost kernel: [ 6.228800] No connectors reported connected with modes
    Jul 26 23:52:06 localhost kernel: [ 6.228802] [drm] Cannot find any crtc or sizes - going 1024x768
    Jul 26 23:52:06 localhost kernel: [ 6.231002] [drm] nouveau 0000:04:00.0: allocated 1024x768 fb: 0x8020000, bo ffff880608d97800
    Jul 26 23:52:06 localhost kernel: [ 6.233786] Console: switching to colour frame buffer device 128x48
    Jul 26 23:52:06 localhost kernel: [ 6.235094] fb0: nouveaufb frame buffer device
    Jul 26 23:52:06 localhost kernel: [ 6.235094] drm: registered panic notifier
    Jul 26 23:52:06 localhost kernel: [ 6.235098] [drm] Initialized nouveau 0.0.16 20090420 for 0000:04:00.0 on minor 0
    Jul 26 23:52:06 localhost kernel: [ 6.255449] HDA Intel 0000:04:00.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    Jul 26 23:52:06 localhost kernel: [ 6.255451] hda_intel: Disable MSI for Nvidia chipset
    Jul 26 23:52:06 localhost kernel: [ 6.255599] HDA Intel 0000:04:00.1: setting latency timer to 64
    Jul 26 23:52:06 localhost kernel: [ 7.663482] EXT4-fs (sda3): re-mounted. Opts: (null)
    Jul 26 23:52:06 localhost kernel: [ 7.807508] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    Jul 26 23:52:06 localhost kernel: [ 7.851401] Adding 265068k swap on /dev/sda2. Priority:-1 extents:1 across:265068k
    Jul 26 23:52:06 localhost kernel: [ 8.569682] r8169 0000:08:00.0: eth0: link down
    Jul 26 23:52:06 localhost kernel: [ 8.569687] r8169 0000:08:00.0: eth0: link down
    Jul 26 23:52:06 localhost dhcpcd[747]: eth0: waiting for carrier
    Jul 26 23:52:08 localhost dhcpcd[747]: eth0: carrier acquired
    Jul 26 23:52:08 localhost kernel: [ 10.301736] r8169 0000:08:00.0: eth0: link up
    Jul 26 23:52:08 localhost dhcpcd[747]: eth0: broadcasting for a lease
    Jul 26 23:52:12 localhost dhcpcd[747]: eth0: offered 131.181.53.42 from 131.181.127.32
    Jul 26 23:52:13 localhost dhcpcd[747]: eth0: acknowledged 131.181.53.42 from 131.181.59.48
    Jul 26 23:52:13 localhost dhcpcd[747]: eth0: checking for 131.181.53.42
    Jul 26 23:52:18 localhost dhcpcd[747]: eth0: leased 131.181.53.42 for 43200 seconds
    Jul 26 23:52:18 localhost dhcpcd[747]: forked to background, child pid 774
    Jul 26 23:52:18 localhost crond[823]: /usr/sbin/crond 4.5 dillon's cron daemon, started with loglevel info
    Jul 26 23:53:01 localhost crond[823]: FILE /etc/cron.d/prune-cronstamps USER root PID 835 job prune-cronstamps
    Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 836 job sys-hourly
    Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 837 job sys-daily
    Jul 26 23:53:01 localhost crond[823]: FILE /var/spool/cron/root USER root PID 838 job sys-weekly
    Any help fixing this would be greatly appreciated.

    I have been trying to isolate the problem a little further. I re-installed (with just the base and sudo) and after upgrading pacman rebooted and it worked without fail. Then I installed libusb and libusb-compat which where required when I tried to upgrade just the kernel using
    pacman -S kernel26
    which initially failed because of the missing dependencies libusb and libusb-compat. I then re-booted and that worked without a problem.
    I then upgraded to Kernel 2.6.39 using the above command and then it hung on rebooting. I saved the logs at each stage.
    The additional logs in errors.log in the reboot that failed are as follows.
    ul 26 16:28:39 O313 kernel: [ 5.120698] [drm] nouveau 0000:04:00.0: Pointer to BIT loadval table invalid
    Jul 26 16:28:39 O313 kernel: [ 5.360508] [drm] nouveau 0000:04:00.0: failed to load fuc409d
    Jul 26 16:28:39 O313 kernel: [ 5.808016] sd 20:0:0:0: [sdb] Assuming drive cache: write through
    Jul 26 16:28:39 O313 kernel: [ 5.809960] sd 20:0:0:0: [sdb] Assuming drive cache: write through
    Jul 26 16:28:39 O313 kernel: [ 5.812116] sd 20:0:0:0: [sdb] Assuming drive cache: write through
    Jul 26 16:28:35 O313 udevd[369]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
    The end of kernel.log is as follows:
    Sat Jul 9 14:57:41 CEST 2011
    Jul 26 16:28:39 O313 kernel: [ 0.000000] Command line: root=/dev/disk/by-uuid/e4733c60-3e54-4001-a83e-415b690dfcb0 ro
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-provided physical RAM map:
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f800 (usable)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000000100000 - 00000000cfed0000 (usable)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfed0000 - 00000000cfed1000 (ACPI NVS)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfed1000 - 00000000cfee0000 (ACPI data)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000cfee0000 - 00000000cff00000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] BIOS-e820: 0000000100000000 - 0000000630000000 (usable)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] NX (Execute Disable) protection: active
    Jul 26 16:28:39 O313 kernel: [ 0.000000] DMI 2.4 present.
    Jul 26 16:28:39 O313 kernel: [ 0.000000] DMI: Gigabyte Technology Co., Ltd. X58A-UD5/X58A-UD5, BIOS FD 02/01/2011
    Jul 26 16:28:39 O313 kernel: [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    Jul 26 16:28:39 O313 kernel: [ 0.000000] No AGP bridge found
    Jul 26 16:28:39 O313 kernel: [ 0.000000] last_pfn = 0x630000 max_arch_pfn = 0x400000000
    And this is the end of daemon.log
    Jul 26 16:27:49 O313 init: Switching to runlevel: 6
    Jul 26 16:27:50 O313 dhcpcd: received SIGTERM, stopping
    Jul 26 16:27:50 O313 dhcpcd: eth0: removing interface
    Jul 26 16:28:39 O313 2.352592] udevd[87]: starting version 171
    Jul 26 16:28:39 O313 4.531007] udevd[370]: starting version 171
    Jul 26 16:28:39 O313 dhcpcd: version 5.2.2 starting
    Jul 26 16:28:39 O313 dhcpcd: eth0: waiting for carrier
    Jul 26 16:28:35 O313 udevd[369]: error: runtime directory '/run/udev' not writable, for now falling back to '/dev/.udev'
    Jul 26 16:28:39 O313 init: Entering runlevel: 3
    Please let me know if any further information would be useful in tracking down this problem. Also ignore any timings in my initial post they were incorrect.
    Last edited by TheStatsMan (2011-07-26 07:40:48)

  • [Solved]Terminology - Broken after upgrade

    After running a system update it appears that Terminology is no longer working correctly.
    i.e:
    Background does not render properly, just shows black screen, Cannot use rightclick to make modifications, etc
    Has anyone else experienced this issue?
    =====================================
    Fix:
    Downgrade to package 0.6.1-1 from cache
    pacman -U /var/cache/pacman/pkg/terminology-0.6.1-1-x86_64.pkg.tar.xz
    =====================================
    Last edited by cyberpsych0sis (2014-11-12 02:59:41)

    jasonwryan wrote:
    Start it from another terminal and see what error it prints...
    Also, please paste the list of packages that were included in your last upgrade.
    Output from the pacman.log after upgrade:
    [2014-11-11 18:21] [PACMAN] Running 'pacman -Syu'
    [2014-11-11 18:21] [PACMAN] synchronizing package lists
    [2014-11-11 18:22] [PACMAN] starting full system upgrade
    [2014-11-11 18:30] [PACMAN] upgraded at-spi2-core (2.14.0-1 -> 2.14.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded avahi (0.6.31-13 -> 0.6.31-14)
    [2014-11-11 18:30] [PACMAN] upgraded ca-certificates-mozilla (3.17.1-1 -> 3.17.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded calibre (2.8.0-1 -> 2.9.0-1)
    [2014-11-11 18:30] [PACMAN] upgraded kmod (18-1 -> 18-2)
    [2014-11-11 18:30] [PACMAN] upgraded libsystemd (216-3 -> 217-6)
    [2014-11-11 18:30] [PACMAN] installed lz4 (123-1)
    [2014-11-11 18:30] [PACMAN] upgraded systemd (216-3 -> 217-6)
    [2014-11-11 18:30] [PACMAN] upgraded colord (1.2.3-1 -> 1.2.5-1)
    [2014-11-11 18:30] [PACMAN] upgraded curl (7.38.0-3 -> 7.39.0-1)
    [2014-11-11 18:30] [PACMAN] upgraded dhcpcd (6.6.0-1 -> 6.6.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded gcc-libs (4.9.1-2 -> 4.9.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded poppler (0.26.5-1 -> 0.28.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded evas_generic_loaders (1.11.2-1 -> 1.11.2-2)
    [2014-11-11 18:30] [PACMAN] upgraded fakeroot (1.20.1-1 -> 1.20.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded gcc (4.9.1-2 -> 4.9.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded gnutls (3.3.9-1 -> 3.3.10-1)
    [2014-11-11 18:30] [PACMAN] upgraded gstreamer (1.4.3-1 -> 1.4.4-1)
    [2014-11-11 18:30] [PACMAN] upgraded gst-plugins-base-libs (1.4.3-1 -> 1.4.4-1)
    [2014-11-11 18:30] [PACMAN] upgraded gst-plugins-base (1.4.3-1 -> 1.4.4-1)
    [2014-11-11 18:30] [PACMAN] upgraded gtk3 (3.14.4-2 -> 3.14.5-1)
    [2014-11-11 18:30] [PACMAN] upgraded ldns (1.6.17-1 -> 1.6.17-2)
    [2014-11-11 18:30] [PACMAN] upgraded libedit (20140620_3.1-1 -> 20141030_3.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded libffi (3.1-2 -> 3.1-3)
    [2014-11-11 18:30] [PACMAN] upgraded libltdl (2.4.2-14 -> 2.4.2-15)
    [2014-11-11 18:30] [PACMAN] upgraded libtool (2.4.2-14 -> 2.4.2-15)
    [2014-11-11 18:30] [PACMAN] upgraded logrotate (3.8.7-3 -> 3.8.8-2)
    [2014-11-11 18:30] [PACMAN] upgraded man-db (2.7.0.2-2 -> 2.7.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded mesa-dri (10.3.2-1 -> 10.3.3-1)
    [2014-11-11 18:30] [PACMAN] upgraded mesa (10.3.2-1 -> 10.3.3-1)
    [2014-11-11 18:30] [PACMAN] upgraded mesa-libgl (10.3.2-1 -> 10.3.3-1)
    [2014-11-11 18:30] [PACMAN] upgraded nss (3.17.1-1 -> 3.17.2-1)
    [2014-11-11 18:30] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2014-11-11 18:30] [PACMAN] upgraded pacman-mirrorlist (20141028-1 -> 20141108-1)
    [2014-11-11 18:30] [PACMAN] upgraded poppler-glib (0.26.5-1 -> 0.28.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded python-pygments (1.6-4 -> 2.0.1-1)
    [2014-11-11 18:30] [PACMAN] upgraded systemd-sysvcompat (216-3 -> 217-6)
    [2014-11-11 18:30] [PACMAN] upgraded terminology (0.6.1-1 -> 0.7.0-1)
    [2014-11-11 18:30] [PACMAN] upgraded xorg-server-common (1.16.1-1 -> 1.16.2-1)
    [2014-11-11 18:30] [PACMAN] upgraded xorg-server (1.16.1-1 -> 1.16.2-1)
    And when I run Terminology from Xterm it doesn't seem to provide any errors.

  • Hang on boot after upgrade to kernel 2.6.31 [SOLVED]

    hey all,
    My system hangs after installing 2.6.31.  the message is this:
    pci 0000:00:00.0: BAR 3: address space collision on of device [0xe0000000-0xffffffff]
    i tried 2.6.30, but compiz was too slow, so i went back to 2.6.29.  dmesg:
    Linux version 2.6.29-ARCH (root@T-POWA-LX) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Wed May 20 07:06:02 UTC 2009
    KERNEL supported cpus:
    Intel GenuineIntel
    AMD AuthenticAMD
    NSC Geode by NSC
    Cyrix CyrixInstead
    Centaur CentaurHauls
    Transmeta GenuineTMx86
    Transmeta TransmetaCPU
    UMC UMC UMC UMC
    BIOS-provided physical RAM map:
    BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
    BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved)
    BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved)
    BIOS-e820: 0000000000100000 - 00000000cfda0000 (usable)
    BIOS-e820: 00000000cfda0000 - 00000000cfdae000 (ACPI data)
    BIOS-e820: 00000000cfdae000 - 00000000cfdf0000 (ACPI NVS)
    BIOS-e820: 00000000cfdf0000 - 00000000cff00000 (reserved)
    BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved)
    BIOS-e820: 0000000100000000 - 0000000130000000 (usable)
    DMI present.
    AMI BIOS detected: BIOS may corrupt low RAM, working around it.
    last_pfn = 0xcfda0 max_arch_pfn = 0x100000
    x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    Scanning 0 areas for low memory corruption
    modified physical RAM map:
    modified: 0000000000000000 - 0000000000010000 (reserved)
    modified: 0000000000010000 - 000000000009f000 (usable)
    modified: 000000000009f000 - 00000000000a0000 (reserved)
    modified: 00000000000e6000 - 0000000000100000 (reserved)
    modified: 0000000000100000 - 00000000cfda0000 (usable)
    modified: 00000000cfda0000 - 00000000cfdae000 (ACPI data)
    modified: 00000000cfdae000 - 00000000cfdf0000 (ACPI NVS)
    modified: 00000000cfdf0000 - 00000000cff00000 (reserved)
    modified: 00000000fff00000 - 0000000100000000 (reserved)
    modified: 0000000100000000 - 0000000130000000 (usable)
    kernel direct mapping tables up to 377fe000 @ 10000-15000
    RAMDISK: 7fbab000 - 7ffef415
    Allocated new RAMDISK: 005a6000 - 009ea415
    Move RAMDISK from 000000007fbab000 - 000000007ffef414 to 005a6000 - 009ea414
    ACPI: RSDP 000F9410, 0014 (r0 ACPIAM)
    ACPI: RSDT CFDA0000, 003C (r1 7577MS A7577100 20090427 MSFT 97)
    ACPI: FACP CFDA0200, 0084 (r1 7577MS A7577100 20090427 MSFT 97)
    ACPI Warning (tbfadt-0596): Optional field Pm2ControlBlock has zero address or length: 0000000000000000/1 [20081204]
    FADT: X_PM1a_EVT_BLK.bit_width (16) does not match PM1_EVT_LEN (4)
    ACPI: DSDT CFDA0440, A216 (r1 A7577 A7577100 100 INTL 20051117)
    ACPI: FACS CFDAE000, 0040
    ACPI: APIC CFDA0390, 006C (r1 7577MS A7577100 20090427 MSFT 97)
    ACPI: MCFG CFDA0400, 003C (r1 7577MS OEMMCFG 20090427 MSFT 97)
    ACPI: OEMB CFDAE040, 0072 (r1 7577MS A7577100 20090427 MSFT 97)
    ACPI: HPET CFDAA660, 0038 (r1 7577MS OEMHPET 20090427 MSFT 97)
    ACPI: SSDT CFDAA6A0, 088C (r1 A M I POWERNOW 1 AMD 1)
    ACPI: Local APIC address 0xfee00000
    2437MB HIGHMEM available.
    887MB LOWMEM available.
    mapped low ram: 0 - 377fe000
    low ram: 00000000 - 377fe000
    bootmap 00011000 - 00017f00
    (9 early reservations) ==> bootmem [0000000000 - 00377fe000]
    #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000]
    #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000]
    #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000]
    #3 [0000100000 - 00005a2604] TEXT DATA BSS ==> [0000100000 - 00005a2604]
    #4 [00005a3000 - 00005a6000] INIT_PG_TABLE ==> [00005a3000 - 00005a6000]
    #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000]
    #6 [0000010000 - 0000011000] PGTABLE ==> [0000010000 - 0000011000]
    #7 [00005a6000 - 00009ea415] NEW RAMDISK ==> [00005a6000 - 00009ea415]
    #8 [0000011000 - 0000018000] BOOTMAP ==> [0000011000 - 0000018000]
    found SMP MP-table at [c00ff780] 000ff780
    Zone PFN ranges:
    DMA 0x00000010 -> 0x00001000
    Normal 0x00001000 -> 0x000377fe
    HighMem 0x000377fe -> 0x000cfda0
    Movable zone start PFN for each node
    early_node_map[2] active PFN ranges
    0: 0x00000010 -> 0x0000009f
    0: 0x00000100 -> 0x000cfda0
    On node 0 totalpages: 851247
    free_area_init_node: node 0, pgdat c0430600, node_mem_map c1000200
    DMA zone: 32 pages used for memmap
    DMA zone: 0 pages reserved
    DMA zone: 3951 pages, LIFO batch:0
    Normal zone: 1744 pages used for memmap
    Normal zone: 221486 pages, LIFO batch:31
    HighMem zone: 4876 pages used for memmap
    HighMem zone: 619158 pages, LIFO batch:31
    ACPI: PM-Timer IO Port: 0x808
    ACPI: Local APIC address 0xfee00000
    ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    ACPI: IOAPIC (id[0x04] address[0xfec00000] gsi_base[0])
    IOAPIC[0]: apic_id 4, version 33, address 0xfec00000, GSI 0-23
    ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    ACPI: IRQ0 used by override.
    ACPI: IRQ2 used by override.
    ACPI: IRQ9 used by override.
    Enabling APIC mode: Flat. Using 1 I/O APICs
    Using ACPI (MADT) for SMP configuration information
    ACPI: HPET id: 0x8300 base: 0xfed00000
    SMP: Allowing 4 CPUs, 0 hotplug CPUs
    nr_irqs_gsi: 24
    PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000
    PM: Registered nosave memory: 00000000000e6000 - 0000000000100000
    Allocating PCI resources starting at d0000000 (gap: cff00000:30000000)
    NR_CPUS:16 nr_cpumask_bits:16 nr_cpu_ids:4 nr_node_ids:1
    PERCPU: Allocating 36864 bytes of per cpu data
    Built 1 zonelists in Zone order, mobility grouping on. Total pages: 844595
    Kernel command line: root=/dev/disk/by-uuid/deebdc30-3ac7-4de2-81d2-eb4d199468b9 ro quiet vga=792 splash
    Enabling fast FPU save and restore... done.
    Enabling unmasked SIMD FPU exception support... done.
    Initializing CPU#0
    PID hash table entries: 4096 (order: 12, 16384 bytes)
    Fast TSC calibration using PIT
    Detected 3214.713 MHz processor.
    Console: colour dummy device 80x25
    console [tty0] enabled
    Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
    Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
    Memory: 3367428k/3405440k available (2363k kernel code, 36780k reserved, 1059k data, 340k init, 2496136k highmem)
    virtual kernel memory layout:
    fixmap : 0xffee8000 - 0xfffff000 (1116 kB)
    pkmap : 0xff800000 - 0xffc00000 (4096 kB)
    vmalloc : 0xf7ffe000 - 0xff7fe000 ( 120 MB)
    lowmem : 0xc0000000 - 0xf77fe000 ( 887 MB)
    .init : 0xc045d000 - 0xc04b2000 ( 340 kB)
    .data : 0xc034ec74 - 0xc0457a88 (1059 kB)
    .text : 0xc0100000 - 0xc034ec74 (2363 kB)
    Checking if this processor honours the WP bit even in supervisor mode...Ok.
    SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    hpet clockevent registered
    HPET: 4 timers in total, 1 timers will be used for per-cpu timer
    Calibrating delay loop (skipped), value calculated using timer frequency.. 6431.31 BogoMIPS (lpj=10715710)
    Security Framework initialized
    Mount-cache hash table entries: 512
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 0
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#0.
    using C1E aware idle routine
    Checking 'hlt' instruction... OK.
    ACPI: Core revision 20081204
    ACPI: Checking initramfs for custom DSDT
    ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    CPU0: AMD Phenom(tm) II X4 955 Processor stepping 02
    Booting processor 1 APIC 0x1 ip 0x6000
    Initializing CPU#1
    Calibrating delay using timer specific routine.. 6431.80 BogoMIPS (lpj=10714888)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 1
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#1.
    x86 PAT enabled: cpu 1, old 0x7040600070406, new 0x7010600070106
    CPU1: AMD Phenom(tm) II X4 955 Processor stepping 02
    checking TSC synchronization [CPU#0 -> CPU#1]: passed.
    System has AMD C1E enabled
    Switch to broadcast mode on CPU1
    Booting processor 2 APIC 0x2 ip 0x6000
    Initializing CPU#2
    Calibrating delay using timer specific routine.. 6431.79 BogoMIPS (lpj=10714876)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 2
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#2.
    x86 PAT enabled: cpu 2, old 0x7040600070406, new 0x7010600070106
    CPU2: AMD Phenom(tm) II X4 955 Processor stepping 02
    checking TSC synchronization [CPU#0 -> CPU#2]: passed.
    Switch to broadcast mode on CPU2
    Booting processor 3 APIC 0x3 ip 0x6000
    Initializing CPU#3
    Calibrating delay using timer specific routine.. 6431.80 BogoMIPS (lpj=10714888)
    CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
    CPU: L2 Cache: 512K (64 bytes/line)
    CPU: Physical Processor ID: 0
    CPU: Processor Core ID: 3
    Intel machine check architecture supported.
    Intel machine check reporting enabled on CPU#3.
    x86 PAT enabled: cpu 3, old 0x7040600070406, new 0x7010600070106
    CPU3: AMD Phenom(tm) II X4 955 Processor stepping 02
    checking TSC synchronization [CPU#0 -> CPU#3]: passed.
    Brought up 4 CPUs
    Total of 4 processors activated (25726.72 BogoMIPS).
    Switch to broadcast mode on CPU3
    Switch to broadcast mode on CPU0
    net_namespace: 1016 bytes
    Booting paravirtualized kernel on bare hardware
    NET: Registered protocol family 16
    ACPI: bus type pci registered
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: Not using MMCONFIG.
    PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
    PCI: Using configuration type 1 for base access
    PCI: Using configuration type 1 for extended access
    bio: create slab <bio-0> at 0
    ACPI: EC: Look up EC in DSDT
    ACPI: Interpreter enabled
    ACPI: (supports S0 S1 S3 S4 S5)
    ACPI: Using IOAPIC for interrupt routing
    PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
    PCI: MCFG area at e0000000 reserved in ACPI motherboard resources
    PCI: Using MMCONFIG for extended config space
    ACPI: No dock devices found.
    ACPI: PCI Root Bridge [PCI0] (0000:00)
    pci 0000:00:00.0: reg 1c 64bit mmio: [0xe0000000-0xffffffff]
    pci 0000:00:02.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:02.0: PME# disabled
    pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:05.0: PME# disabled
    pci 0000:00:06.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:06.0: PME# disabled
    pci 0000:00:07.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:07.0: PME# disabled
    pci 0000:00:09.0: PME# supported from D0 D3hot D3cold
    pci 0000:00:09.0: PME# disabled
    pci 0000:00:11.0: reg 10 io port: [0x8000-0x8007]
    pci 0000:00:11.0: reg 14 io port: [0x7000-0x7003]
    pci 0000:00:11.0: reg 18 io port: [0x6000-0x6007]
    pci 0000:00:11.0: reg 1c io port: [0x5000-0x5003]
    pci 0000:00:11.0: reg 20 io port: [0x3000-0x300f]
    pci 0000:00:11.0: reg 24 32bit mmio: [0xf9fffc00-0xf9ffffff]
    pci 0000:00:11.0: set SATA to AHCI mode
    pci 0000:00:12.0: reg 10 32bit mmio: [0xf9ffe000-0xf9ffefff]
    pci 0000:00:12.1: reg 10 32bit mmio: [0xf9ffd000-0xf9ffdfff]
    pci 0000:00:12.2: reg 10 32bit mmio: [0xf9fff800-0xf9fff8ff]
    pci 0000:00:12.2: supports D1 D2
    pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:12.2: PME# disabled
    pci 0000:00:13.0: reg 10 32bit mmio: [0xf9ffc000-0xf9ffcfff]
    pci 0000:00:13.1: reg 10 32bit mmio: [0xf9ffb000-0xf9ffbfff]
    pci 0000:00:13.2: reg 10 32bit mmio: [0xf9fff400-0xf9fff4ff]
    pci 0000:00:13.2: supports D1 D2
    pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    pci 0000:00:13.2: PME# disabled
    pci 0000:00:14.1: reg 10 io port: [0x00-0x07]
    pci 0000:00:14.1: reg 14 io port: [0x00-0x03]
    pci 0000:00:14.1: reg 18 io port: [0x00-0x07]
    pci 0000:00:14.1: reg 1c io port: [0x00-0x03]
    pci 0000:00:14.1: reg 20 io port: [0xff00-0xff0f]
    pci 0000:00:14.2: reg 10 64bit mmio: [0xf9ff4000-0xf9ff7fff]
    pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    pci 0000:00:14.2: PME# disabled
    pci 0000:00:14.5: reg 10 32bit mmio: [0xf9ffa000-0xf9ffafff]
    pci 0000:01:00.0: reg 10 32bit mmio: [0xfd000000-0xfdffffff]
    pci 0000:01:00.0: reg 14 64bit mmio: [0xd0000000-0xdfffffff]
    pci 0000:01:00.0: reg 1c 64bit mmio: [0xfa000000-0xfbffffff]
    pci 0000:01:00.0: reg 24 io port: [0x9800-0x987f]
    pci 0000:01:00.0: reg 30 32bit mmio: [0xfe7e0000-0xfe7fffff]
    pci 0000:00:02.0: bridge io port: [0x9000-0x9fff]
    pci 0000:00:02.0: bridge 32bit mmio: [0xfa000000-0xfe7fffff]
    pci 0000:00:02.0: bridge 64bit mmio pref: [0xd0000000-0xdfffffff]
    pci 0000:02:00.0: reg 10 io port: [0xa800-0xa8ff]
    pci 0000:02:00.0: reg 18 64bit mmio: [0xf8eff000-0xf8efffff]
    pci 0000:02:00.0: reg 20 64bit mmio: [0xf8ef8000-0xf8efbfff]
    pci 0000:02:00.0: reg 30 32bit mmio: [0xfe8e0000-0xfe8fffff]
    pci 0000:02:00.0: supports D1 D2
    pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:02:00.0: PME# disabled
    pci 0000:00:05.0: bridge io port: [0xa000-0xafff]
    pci 0000:00:05.0: bridge 32bit mmio: [0xfe800000-0xfe8fffff]
    pci 0000:00:05.0: bridge 64bit mmio pref: [0xf8e00000-0xf8efffff]
    pci 0000:03:00.0: reg 10 io port: [0xb800-0xb8ff]
    pci 0000:03:00.0: reg 18 64bit mmio: [0xf8fff000-0xf8ffffff]
    pci 0000:03:00.0: reg 20 64bit mmio: [0xf8ff8000-0xf8ffbfff]
    pci 0000:03:00.0: reg 30 32bit mmio: [0xfe9e0000-0xfe9fffff]
    pci 0000:03:00.0: supports D1 D2
    pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    pci 0000:03:00.0: PME# disabled
    pci 0000:00:06.0: bridge io port: [0xb000-0xbfff]
    pci 0000:00:06.0: bridge 32bit mmio: [0xfe900000-0xfe9fffff]
    pci 0000:00:06.0: bridge 64bit mmio pref: [0xf8f00000-0xf8ffffff]
    pci 0000:04:00.0: reg 10 64bit mmio: [0xfeaff800-0xfeafffff]
    pci 0000:04:00.0: reg 18 io port: [0xc800-0xc8ff]
    pci 0000:04:00.0: supports D2
    pci 0000:04:00.0: PME# supported from D2 D3hot D3cold
    pci 0000:04:00.0: PME# disabled
    pci 0000:00:07.0: bridge io port: [0xc000-0xcfff]
    pci 0000:00:07.0: bridge 32bit mmio: [0xfea00000-0xfeafffff]
    pci 0000:05:00.0: reg 24 32bit mmio: [0xfebfe000-0xfebfffff]
    pci 0000:05:00.0: PME# supported from D3hot
    pci 0000:05:00.0: PME# disabled
    pci 0000:05:00.1: reg 10 io port: [0xe800-0xe807]
    pci 0000:05:00.1: reg 14 io port: [0xe400-0xe403]
    pci 0000:05:00.1: reg 18 io port: [0xe000-0xe007]
    pci 0000:05:00.1: reg 1c io port: [0xd800-0xd803]
    pci 0000:05:00.1: reg 20 io port: [0xd400-0xd40f]
    pci 0000:00:09.0: bridge io port: [0xd000-0xefff]
    pci 0000:00:09.0: bridge 32bit mmio: [0xfeb00000-0xfebfffff]
    pci 0000:00:14.4: transparent bridge
    pci_bus 0000:00: on NUMA node 0
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE5._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE6._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE7._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE9._PRT]
    ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0PC._PRT]
    ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 *11 12 14 15)
    ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKD] (IRQs 4 *7 10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    ACPI: PCI Interrupt Link [LNKG] (IRQs *10 11 12 14 15)
    ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 12 14 15) *0, disabled.
    ACPI Warning (tbutils-0242): Incorrect checksum in table [OEMB] - 47, should be 46 [20081204]
    PCI: Using ACPI for IRQ routing
    pci 0000:00:00.0: BAR 3: can't allocate resource
    NetLabel: Initializing
    NetLabel: domain hash size = 128
    NetLabel: protocols = UNLABELED CIPSOv4
    NetLabel: unlabeled traffic allowed by default
    hpet: hpet2 irq 24 for MSI
    pnp: PnP ACPI init
    ACPI: bus type pnp registered
    pnp 00:0d: mem resource (0x0-0x9ffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    pnp 00:0d: mem resource (0xc0000-0xcffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    pnp 00:0d: mem resource (0xe0000-0xfffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    pnp 00:0d: mem resource (0x100000-0xcfefffff) overlaps 0000:00:00.0 BAR 3 (0x0-0x1fffffff), disabling
    pnp: PnP ACPI: found 14 devices
    ACPI: ACPI bus type pnp unregistered
    system 00:09: iomem range 0xfec00000-0xfec00fff has been reserved
    system 00:09: iomem range 0xfee00000-0xfee00fff has been reserved
    system 00:0a: ioport range 0x4d0-0x4d1 has been reserved
    system 00:0a: ioport range 0x40b-0x40b has been reserved
    system 00:0a: ioport range 0x4d6-0x4d6 has been reserved
    system 00:0a: ioport range 0xc00-0xc01 has been reserved
    system 00:0a: ioport range 0xc14-0xc14 has been reserved
    system 00:0a: ioport range 0xc50-0xc51 has been reserved
    system 00:0a: ioport range 0xc52-0xc52 has been reserved
    system 00:0a: ioport range 0xc6c-0xc6c has been reserved
    system 00:0a: ioport range 0xc6f-0xc6f has been reserved
    system 00:0a: ioport range 0xcd0-0xcd1 has been reserved
    system 00:0a: ioport range 0xcd2-0xcd3 has been reserved
    system 00:0a: ioport range 0xcd4-0xcd5 has been reserved
    system 00:0a: ioport range 0xcd6-0xcd7 has been reserved
    system 00:0a: ioport range 0xcd8-0xcdf has been reserved
    system 00:0a: ioport range 0x800-0x89f has been reserved
    system 00:0a: ioport range 0xb00-0xb0f has been reserved
    system 00:0a: ioport range 0xb20-0xb3f has been reserved
    system 00:0a: ioport range 0x900-0x90f has been reserved
    system 00:0a: ioport range 0x910-0x91f has been reserved
    system 00:0a: ioport range 0xfe00-0xfefe has been reserved
    system 00:0a: iomem range 0xffb80000-0xffbfffff has been reserved
    system 00:0a: iomem range 0xfec10000-0xfec1001f has been reserved
    system 00:0b: ioport range 0x600-0x6df has been reserved
    system 00:0b: ioport range 0x6e0-0x6ef has been reserved
    system 00:0c: iomem range 0xe0000000-0xefffffff has been reserved
    system 00:0d: iomem range 0xfec00000-0xffffffff could not be reserved
    Switched to high resolution mode on CPU 3
    Switched to high resolution mode on CPU 1
    Switched to high resolution mode on CPU 2
    Switched to high resolution mode on CPU 0
    pci 0000:00:02.0: PCI bridge, secondary bus 0000:01
    pci 0000:00:02.0: IO window: 0x9000-0x9fff
    pci 0000:00:02.0: MEM window: 0xfa000000-0xfe7fffff
    pci 0000:00:02.0: PREFETCH window: 0x000000d0000000-0x000000dfffffff
    pci 0000:00:05.0: PCI bridge, secondary bus 0000:02
    pci 0000:00:05.0: IO window: 0xa000-0xafff
    pci 0000:00:05.0: MEM window: 0xfe800000-0xfe8fffff
    pci 0000:00:05.0: PREFETCH window: 0x000000f8e00000-0x000000f8efffff
    pci 0000:00:06.0: PCI bridge, secondary bus 0000:03
    pci 0000:00:06.0: IO window: 0xb000-0xbfff
    pci 0000:00:06.0: MEM window: 0xfe900000-0xfe9fffff
    pci 0000:00:06.0: PREFETCH window: 0x000000f8f00000-0x000000f8ffffff
    pci 0000:00:07.0: PCI bridge, secondary bus 0000:04
    pci 0000:00:07.0: IO window: 0xc000-0xcfff
    pci 0000:00:07.0: MEM window: 0xfea00000-0xfeafffff
    pci 0000:00:07.0: PREFETCH window: disabled
    pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
    pci 0000:00:09.0: IO window: 0xd000-0xefff
    pci 0000:00:09.0: MEM window: 0xfeb00000-0xfebfffff
    pci 0000:00:09.0: PREFETCH window: disabled
    pci 0000:00:14.4: PCI bridge, secondary bus 0000:06
    pci 0000:00:14.4: IO window: disabled
    pci 0000:00:14.4: MEM window: disabled
    pci 0000:00:14.4: PREFETCH window: disabled
    pci 0000:00:02.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:02.0: setting latency timer to 64
    pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:05.0: setting latency timer to 64
    pci 0000:00:06.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    pci 0000:00:06.0: setting latency timer to 64
    pci 0000:00:07.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    pci 0000:00:07.0: setting latency timer to 64
    pci 0000:00:09.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    pci 0000:00:09.0: setting latency timer to 64
    pci_bus 0000:00: resource 0 io: [0x00-0xffff]
    pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
    pci_bus 0000:01: resource 0 io: [0x9000-0x9fff]
    pci_bus 0000:01: resource 1 mem: [0xfa000000-0xfe7fffff]
    pci_bus 0000:01: resource 2 mem: [0xd0000000-0xdfffffff]
    pci_bus 0000:01: resource 3 mem: [0x0-0x0]
    pci_bus 0000:02: resource 0 io: [0xa000-0xafff]
    pci_bus 0000:02: resource 1 mem: [0xfe800000-0xfe8fffff]
    pci_bus 0000:02: resource 2 mem: [0xf8e00000-0xf8efffff]
    pci_bus 0000:02: resource 3 mem: [0x0-0x0]
    pci_bus 0000:03: resource 0 io: [0xb000-0xbfff]
    pci_bus 0000:03: resource 1 mem: [0xfe900000-0xfe9fffff]
    pci_bus 0000:03: resource 2 mem: [0xf8f00000-0xf8ffffff]
    pci_bus 0000:03: resource 3 mem: [0x0-0x0]
    pci_bus 0000:04: resource 0 io: [0xc000-0xcfff]
    pci_bus 0000:04: resource 1 mem: [0xfea00000-0xfeafffff]
    pci_bus 0000:04: resource 2 mem: [0x0-0x0]
    pci_bus 0000:04: resource 3 mem: [0x0-0x0]
    pci_bus 0000:05: resource 0 io: [0xd000-0xefff]
    pci_bus 0000:05: resource 1 mem: [0xfeb00000-0xfebfffff]
    pci_bus 0000:05: resource 2 mem: [0x0-0x0]
    pci_bus 0000:05: resource 3 mem: [0x0-0x0]
    pci_bus 0000:06: resource 0 mem: [0x0-0x0]
    pci_bus 0000:06: resource 1 mem: [0x0-0x0]
    pci_bus 0000:06: resource 2 mem: [0x0-0x0]
    pci_bus 0000:06: resource 3 io: [0x00-0xffff]
    pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
    NET: Registered protocol family 2
    IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
    TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
    TCP: Hash tables configured (established 131072 bind 65536)
    TCP reno registered
    NET: Registered protocol family 1
    Unpacking initramfs... done
    Freeing initrd memory: 4369k freed
    apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
    apm: disabled - APM is not SMP safe.
    Scanning for low memory corruption every 60 seconds
    audit: initializing netlink socket (disabled)
    type=2000 audit(1252627399.657:1): initialized
    highmem bounce pool size: 64 pages
    VFS: Disk quotas dquot_6.5.2
    Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
    msgmni has been set to 1711
    alg: No test for stdrng (krng)
    Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
    io scheduler noop registered
    io scheduler anticipatory registered
    io scheduler deadline registered
    io scheduler cfq registered (default)
    pci 0000:01:00.0: Boot video device
    pcieport-driver 0000:00:02.0: setting latency timer to 64
    pcieport-driver 0000:00:02.0: irq 25 for MSI/MSI-X
    pcieport-driver 0000:00:05.0: setting latency timer to 64
    pcieport-driver 0000:00:05.0: irq 26 for MSI/MSI-X
    pcieport-driver 0000:00:06.0: setting latency timer to 64
    pcieport-driver 0000:00:06.0: irq 27 for MSI/MSI-X
    pcieport-driver 0000:00:07.0: setting latency timer to 64
    pcieport-driver 0000:00:07.0: irq 28 for MSI/MSI-X
    pcieport-driver 0000:00:09.0: setting latency timer to 64
    pcieport-driver 0000:00:09.0: irq 29 for MSI/MSI-X
    vesafb: framebuffer at 0xfb000000, mapped to 0xf8080000, using 6144k, total 14336k
    vesafb: mode is 1024x768x32, linelength=4096, pages=1
    vesafb: protected mode interface info at c000:b2e0
    vesafb: pmi: set display start = c00cb343, set palette = c00cb39e
    vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
    vesafb: scrolling: redraw
    vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Console: switching to colour frame buffer device 128x48
    fb0: VESA VGA frame buffer device
    isapnp: Scanning for PnP cards...
    isapnp: No Plug & Play device found
    Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    input: Macintosh mouse button emulation as /devices/virtual/input/input0
    PNP: PS/2 Controller [PNP0303:PSKE,PNP0f03:PSMS] at 0x60,0x64 irq 1,12
    serio: i8042 KBD port at 0x60,0x64 irq 1
    serio: i8042 AUX port at 0x60,0x64 irq 12
    mice: PS/2 mouse device common for all mice
    cpuidle: using governor ladder
    cpuidle: using governor menu
    TCP cubic registered
    NET: Registered protocol family 17
    Using IPI No-Shortcut mode
    registered taskstats version 1
    Freeing unused kernel memory: 340k freed
    SCSI subsystem initialized
    libata version 3.00 loaded.
    pata_acpi 0000:00:14.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    pata_acpi 0000:00:14.1: setting latency timer to 64
    pata_acpi 0000:05:00.1: enabling device (0000 -> 0001)
    pata_acpi 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    pata_acpi 0000:05:00.1: setting latency timer to 64
    pata_acpi 0000:05:00.1: PCI INT B disabled
    ahci 0000:00:11.0: version 3.0
    ahci 0000:00:11.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
    ahci 0000:00:11.0: irq 30 for MSI/MSI-X
    ahci 0000:00:11.0: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
    ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    scsi0 : ahci
    scsi1 : ahci
    scsi2 : ahci
    scsi3 : ahci
    ata1: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd00 irq 30
    ata2: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffd80 irq 30
    ata3: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe00 irq 30
    ata4: SATA max UDMA/133 abar m1024@0xf9fffc00 port 0xf9fffe80 irq 30
    usbcore: registered new interface driver usbfs
    usbcore: registered new interface driver hub
    usbcore: registered new device driver usb
    pata_jmicron 0000:05:00.1: PCI INT B -> GSI 18 (level, low) -> IRQ 18
    pata_jmicron 0000:05:00.1: setting latency timer to 64
    scsi4 : pata_jmicron
    scsi5 : pata_jmicron
    ata5: PATA max UDMA/100 cmd 0xe800 ctl 0xe400 bmdma 0xd400 irq 18
    ata6: PATA max UDMA/100 cmd 0xe000 ctl 0xd800 bmdma 0xd408 irq 18
    ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    ata1: SATA link down (SStatus 0 SControl 300)
    ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata2.00: ATAPI: TSSTcorp CD-RW/DVD-ROM TS-H493A, D200, max UDMA/33, ATAPI AN
    ata2.00: configured for UDMA/33
    scsi 1:0:0:0: CD-ROM TSSTcorp CDRWDVD TS-H493A D200 PQ: 0 ANSI: 5
    ata3: SATA link down (SStatus 0 SControl 300)
    ata4: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    ata4.00: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
    ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    ata4.00: configured for UDMA/133
    scsi 3:0:0:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
    ahci 0000:05:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    scsi6 : pata_atiixp
    scsi7 : pata_atiixp
    ata7: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xff00 irq 14
    ata8: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xff08 irq 15
    ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode
    ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part
    ahci 0000:05:00.0: setting latency timer to 64
    scsi8 : ahci
    scsi9 : ahci
    ata9: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe100 irq 17
    ata10: SATA max UDMA/133 abar m8192@0xfebfe000 port 0xfebfe180 irq 17
    ata9: SATA link down (SStatus 0 SControl 300)
    ata8.01: ATA-7: ST3500630AS, 3.AAK, max UDMA/133
    ata8.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32)
    ata8.01: configured for UDMA/100
    scsi 7:0:1:0: Direct-Access ATA ST3500630AS 3.AA PQ: 0 ANSI: 5
    ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    ehci_hcd 0000:00:12.2: EHCI Host Controller
    ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 1
    ehci_hcd 0000:00:12.2: debug port 1
    ehci_hcd 0000:00:12.2: irq 17, io mem 0xf9fff800
    ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    usb usb1: configuration #1 chosen from 1 choice
    hub 1-0:1.0: USB hub found
    hub 1-0:1.0: 6 ports detected
    ohci_hcd 0000:00:12.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ohci_hcd 0000:00:12.0: OHCI Host Controller
    ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 2
    ohci_hcd 0000:00:12.0: irq 16, io mem 0xf9ffe000
    Driver 'sd' needs updating - please use bus_type methods
    sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 3:0:0:0: [sda] Write Protect is off
    sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 3:0:0:0: [sda] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 3:0:0:0: [sda] Write Protect is off
    sd 3:0:0:0: [sda] Mode Sense: 00 3a 00 00
    sd 3:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sda: sda1 sda2 sda3
    sd 3:0:0:0: [sda] Attached SCSI disk
    sd 7:0:1:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 7:0:1:0: [sdb] Write Protect is off
    sd 7:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    sd 7:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sd 7:0:1:0: [sdb] 976773168 512-byte hardware sectors: (500 GB/465 GiB)
    sd 7:0:1:0: [sdb] Write Protect is off
    sd 7:0:1:0: [sdb] Mode Sense: 00 3a 00 00
    sd 7:0:1:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    sdb: sdb1
    sd 7:0:1:0: [sdb] Attached SCSI disk
    usb usb2: configuration #1 chosen from 1 choice
    hub 2-0:1.0: USB hub found
    hub 2-0:1.0: 3 ports detected
    ehci_hcd 0000:00:13.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
    ehci_hcd 0000:00:13.2: EHCI Host Controller
    ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 3
    ehci_hcd 0000:00:13.2: debug port 1
    ehci_hcd 0000:00:13.2: irq 19, io mem 0xf9fff400
    ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    usb usb3: configuration #1 chosen from 1 choice
    hub 3-0:1.0: USB hub found
    hub 3-0:1.0: 6 ports detected
    ohci_hcd 0000:00:12.1: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    ohci_hcd 0000:00:12.1: OHCI Host Controller
    ohci_hcd 0000:00:12.1: new USB bus registered, assigned bus number 4
    ohci_hcd 0000:00:12.1: irq 16, io mem 0xf9ffd000
    usb usb4: configuration #1 chosen from 1 choice
    hub 4-0:1.0: USB hub found
    hub 4-0:1.0: 3 ports detected
    ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:13.0: OHCI Host Controller
    ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 5
    ohci_hcd 0000:00:13.0: irq 18, io mem 0xf9ffc000
    usb usb5: configuration #1 chosen from 1 choice
    hub 5-0:1.0: USB hub found
    hub 5-0:1.0: 3 ports detected
    ohci_hcd 0000:00:13.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:13.1: OHCI Host Controller
    ohci_hcd 0000:00:13.1: new USB bus registered, assigned bus number 6
    ohci_hcd 0000:00:13.1: irq 18, io mem 0xf9ffb000
    ata10: SATA link down (SStatus 0 SControl 300)
    usb usb6: configuration #1 chosen from 1 choice
    hub 6-0:1.0: USB hub found
    hub 6-0:1.0: 3 ports detected
    ohci_hcd 0000:00:14.5: PCI INT C -> GSI 18 (level, low) -> IRQ 18
    ohci_hcd 0000:00:14.5: OHCI Host Controller
    ohci_hcd 0000:00:14.5: new USB bus registered, assigned bus number 7
    ohci_hcd 0000:00:14.5: irq 18, io mem 0xf9ffa000
    usb usb7: configuration #1 chosen from 1 choice
    hub 7-0:1.0: USB hub found
    hub 7-0:1.0: 2 ports detected
    Driver 'sr' needs updating - please use bus_type methods
    sr0: scsi3-mmc drive: 8x/48x writer cd/rw xa/form2 cdda tray
    Uniform CD-ROM driver Revision: 3.20
    sr 1:0:0:0: Attached scsi CD-ROM sr0
    usb 3-2: new high speed USB device using ehci_hcd and address 3
    usb 3-2: configuration #1 chosen from 1 choice
    hub 3-2:1.0: USB hub found
    hub 3-2:1.0: 4 ports detected
    usb 5-1: new low speed USB device using ohci_hcd and address 2
    usb 5-1: configuration #1 chosen from 1 choice
    usbcore: registered new interface driver hiddev
    input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:13.0/usb5/5-1/5-1:1.0/input/input1
    generic-usb 0003:045E:0040.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:13.0-1/input0
    usbcore: registered new interface driver usbhid
    usbhid: v2.6:USB HID core driver
    usb 3-2.4: new high speed USB device using ehci_hcd and address 4
    usb 3-2.4: configuration #1 chosen from 1 choice
    hub 3-2.4:1.0: USB hub found
    hub 3-2.4:1.0: 4 ports detected
    usb 3-2.4.1: new low speed USB device using ehci_hcd and address 5
    usb 3-2.4.1: configuration #1 chosen from 1 choice
    input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.0/input/input2
    generic-usb 0003:045E:00DD.0002: input,hidraw1: USB HID v1.11 Keyboard [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.2-2.4.1/input0
    input: Microsoft Comfort Curve Keyboard 2000 as /devices/pci0000:00/0000:00:13.2/usb3/3-2/3-2.4/3-2.4.1/3-2.4.1:1.1/input/input3
    generic-usb 0003:045E:00DD.0003: input,hidraw2: USB HID v1.11 Device [Microsoft Comfort Curve Keyboard 2000] on usb-0000:00:13.2-2.4.1/input1
    SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    SGI XFS Quota Management subsystem
    XFS mounting filesystem sda3
    Ending clean XFS mount for filesystem: sda3
    rtc_cmos 00:04: RTC can wake from S4
    rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
    rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    udev: starting version 146
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    r8169 0000:02:00.0: setting latency timer to 64
    r8169 0000:02:00.0: irq 31 for MSI/MSI-X
    eth0: RTL8168d/8111d at 0xf888c000, 00:24:21:b7:ca:4d, XID 281000c0 IRQ 31
    r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    r8169 0000:03:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    r8169 0000:03:00.0: setting latency timer to 64
    r8169 0000:03:00.0: irq 32 for MSI/MSI-X
    eth1: RTL8168d/8111d at 0xf8696000, 00:24:21:b7:ca:4c, XID 281000c0 IRQ 32
    HDA Intel 0000:00:14.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
    usbcore: registered new interface driver snd-usb-audio
    input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    ACPI: Power Button (FF) [PWRF]
    input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
    ACPI: Power Button (CM) [PWRB]
    processor ACPI_CPU:00: registered as cooling_device0
    ACPI: Processor [P001] (supports 8 throttling states)
    processor ACPI_CPU:01: registered as cooling_device1
    processor ACPI_CPU:02: registered as cooling_device2
    processor ACPI_CPU:03: registered as cooling_device3
    sr 1:0:0:0: Attached scsi generic sg0 type 5
    sd 3:0:0:0: Attached scsi generic sg1 type 0
    sd 7:0:1:0: Attached scsi generic sg2 type 0
    Linux agpgart interface v0.103
    ohci1394 0000:04:00.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    ohci1394 0000:04:00.0: setting latency timer to 64
    ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[feaff800-feafffff] Max Packet=[2048] IR/IT contexts=[4/8]
    input: PC Speaker as /devices/platform/pcspkr/input/input6
    ACPI: I/O resource piix4_smbus [0xb00-0xb07] conflicts with ACPI region SOR1 [0xb00-0xb0f]
    ACPI: Device needs an ACPI driver
    piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    nvidia: module license 'NVIDIA' taints kernel.
    ACPI: WMI: Mapper loaded
    nvidia 0000:01:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    nvidia 0000:01:00.0: setting latency timer to 64
    NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009
    ieee1394: Host added: ID:BUS[0-00:1023] GUID[0010dc0001947652]
    Adding 996020k swap on /dev/sda2. Priority:-1 extents:1 across:996020k
    r8169: eth0: link up
    r8169: eth0: link up
    NET: Registered protocol family 10
    lo: Disabled Privacy Extensions
    nvclock:4989 freeing invalid memtype fd000000-fd010000
    nvclock:4989 freeing invalid memtype fd010000-fd030000
    nvclock:4989 freeing invalid memtype fd010000-fd030000
    IRQ 18/nvidia: IRQF_DISABLED is not guaranteed on shared IRQs
    eth0: no IPv6 routers present
    ideas?
    Last edited by pnatural (2009-09-17 19:59:58)

    pnatural wrote:
    hi,
    I was able to install 2.6.31 by setting the motherboards E-SATA/RAID mode to "ACPI" instead of "PCI".  I first tried to disable the motherboard raid completely, but the system would not boot at all that way; setting the mode to "ACPI" did the trick.
    I would say thanks, but I did all the work!  But thanks to the Arch folks for a great distribution.
    Hi,I got the follow message,much same with you,could you tell me how to deal?thx.
    Nov  3 23:00:06 ArchLinux kernel: pci 0000:00:14.2: BAR 0: address space collision on of device [0xd4408000-0xd440bfff]

Maybe you are looking for

  • Layer Style Window Opening But Not Visable

    I just began having problems with Photoshop today. I wanted to apply Blending Options to a layer. The Layer Style window opened but it was nowhere to be found! Because I could not access this window to either perform a task or close it, I had to Cont

  • Upgrading ssd on a macbook air 2011

    Hi, I have a mid 2011 macbook air with the 64gb ssd and i am considering upraging this if possible?... also if this can be done (and by apple that is) how much will it cost me roughly? cheers

  • JTable & mouse double-click?

    hi, When I double-clicked a row in a JTable ,how can i get one column's value in that row.how can i do with the mouse event. some examples are preferred. thankx in advance ! rain

  • Can't select paper types

    (Mac OSX 10.5.2, LR 1.3.1) Going crazy trying to figure this out. Somewhere around the time HP updated drivers for the Photosmart Pro B8350, I lost the ability to select anything but one paper type. As a result, none of my prints are coming out prope

  • TS1702 Can't find installed app in iphone5s

    I have very big problem of my iphone5s install app problem. I alrady download app but i couldnt find it, but in the app store its shows I already intalled and i can't open it also.