[SOLVED] No sound after installing/uninstalling gnome

I thought I'd give Gnome a try again after a year or so away from it using bspwm, just to remind myself of it. Once it was installed though my sound no longer worked within bspwm. Uninstalling it with pacman -Runs left me with no sound still. I then reinstalled Gnome so that I could at least have some sound while I worked out the problem, but this time had no sound in Gnome either. I tried using pacman -Rnsdd the second time but again I'm left with no sound. Now if I open alsamixer, the default sound card appears to be HDMI, but changing it back to PCH does nothing. Anyone have any ideas?
Last edited by shpongledspores (2015-06-03 12:55:05)

Fixed it by changing the default control and pcm card to 1 instead of 0 in /usr/share/alsa/alsa.conf

Similar Messages

[SOLVED] No sound after installing pulseaudio

Hi,
I recently installed pulseaudio to be able to use skype since their update to version 4.3.
I installed with additional stuff using the command:
$ sudo pacman -S pulseaudio pulseaudio-alsa pavucontrol lib32-libpulse
After installing I ran the commands:
$ pulseaudio -k
$ pulseaudio --start
At this point, skype and sound were working properly again.
After rebooting my computer, I completely lost the sound. I tried killing and restarting pulseaudio and reinstalled twice, but I never managed to have to sound back since...
Any suggestions?
Thank you for your help
Last edited by nocarch (2014-08-08 00:29:48)

What troubleshooting have you done?
Moving to NC...

[SOLVED] No Sound After Installing KDE

After installing KDE I have no sound.
Results of commands
lspci | grep Audio
gives
00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
and
aplay -l
gives
aplay: device_list:256: no soundcards found...
Can someone help?
Last edited by vujke (2012-11-13 12:14:52)

Morn wrote:First I would run "lsmod" to check if the snd kernel modules are loaded…
Module Size Used by
rfcomm 33791 4
bnep 8857 2
snd_hda_codec_realtek 61193 1
btusb 12372 0
bluetooth 192120 22 bnep,btusb,rfcomm
snd_hda_intel 26180 0
snd_hda_codec 98033 2 snd_hda_codec_realtek,snd_hda_intel
rfkill 15604 2 bluetooth
snd_hwdep 6300 1 snd_hda_codec
snd_pcm 75167 2 snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
coretemp 6070 0
kvm_intel 124749 0
kvm 373917 1 kvm_intel
snd_timer 18934 1 snd_pcm
snd 59989 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
soundcore 5442 1 snd
ppdev 5902 0
psmouse 71909 0
microcode 12377 0
parport_pc 30541 0
acpi_cpufreq 5933 1
mperf 1267 1 acpi_cpufreq
processor 26855 1 acpi_cpufreq
serio_raw 4689 0
pcspkr 1899 0
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
lpc_ich 10609 0
parport 31363 2 ppdev,parport_pc
atl1c 33646 0
asus_atk0110 9824 0
evdev 10266 4
fuse 69173 8
vboxdrv 1823469 0
ext4 440434 2
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
sr_mod 14823 0
cdrom 35520 1 sr_mod
sd_mod 29559 7
ata_generic 3338 0
pata_acpi 3451 0
uhci_hcd 23436 0
ata_piix 23352 5
libata 167683 3 pata_acpi,ata_generic,ata_piix
scsi_mod 133386 3 libata,sd_mod,sr_mod
ehci_hcd 41816 0
usbcore 150398 3 btusb,uhci_hcd,ehci_hcd
usb_common 954 1 usbcore
i915 495073 2
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218724 3 i915,drm_kms_helper
i2c_core 20707 4 drm,i915,drm_kms_helper,i2c_algo_bit
I would say it is.
Morn wrote:
By the way, I'm also having audio issues with KDE 4.9.3 now. I can play sound though, it's the mixer that's broken.
P.S. I could fix my issue in the KMix preferences. (The wrong audio interface had been selected since the upgrade.)
Do you think on Phonon preferences. If is, I got nothing to select.
Last edited by vujke (2012-11-11 22:50:35)

[SOLVED] No sound after installing NVIDIA driver

I have just got a new graphics card (NVIDIA GT 610) and I have installed the proprietary driver for it. My PC has in-built Intel GPU. I had a problem with that that was fairly straight forward to fix. I blacklisted the i915, intel_agp modules as suggested here https://wiki.archlinux.org/index.php/NV … grated_GPU. But I now have no sound. I am almost certain that this is because there is an in-built sound card that I have now blacklisted because before I blacklisted those modules sound seemed to be working fine.
I'm not sure of any great diagnostics tools for sound but speaker-test outputs:
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1022:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
And aplay -l outputs:
**** List of PLAYBACK Hardware Devices ****
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: ICH5 [Intel ICH5], device 0: Intel ICH [Intel ICH5]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: ICH5 [Intel ICH5], device 4: Intel ICH - IEC958 [Intel ICH5 - IEC958]
Subdevices: 1/1
Subdevice #0: subdevice #0
If anyone has any ideas on how I could go about fixing this or what I can try playing with I would very thankful.
--nontlikeuname
Last edited by nontlikeuname (2014-12-30 19:45:40)

That hasn't work but I'm not sure whether I did it properly.
I did cat /proc/asound/modules:
0 snd_hda_intel
1 snd_intel8x0
and set /etc/modprobe.d/alsa-base.conf to
options snd slots=snd_hda_intel,snd_intel8x0
options snd_hda_intel=0
options snd_intel8x0=1
I'm not sure if its of any use but lsmod | grep '^snd' | column -t ouput:
snd_hda_codec_hdmi 32723 1
snd_hda_intel 31703 1
snd_intel8x0 23593 1
snd_ac97_codec 89368 1 snd_intel8x0
snd_hda_codec 129306 2 snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 4746 1 snd_hda_codec
snd_pcm 64085 5 snd_ac97_codec,snd_intel8x0,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 6102 3 snd_intel8x0,snd_pcm,snd_hda_intel
snd_timer 14974 1 snd_pcm
snd 44446 12 snd_ac97_codec,snd_intel8x0,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
Last edited by nontlikeuname (2014-03-24 20:17:05)

[SOLVED]No sound after installing oss

I am installing oss on my x86_64 pc. But I get the following when I type in " soundon ":
Relinking OSS kernel modules for "3.14.2-1-ARCH SMP preempt mod_unload modversions "
This may take few moments - please stand by...
OSS build environment set up for REGPARM kernels
Building module osscore
Failed to compile OSS
make -C /usr/lib/modules/3.14.2-1-ARCH/build M=/usr/lib/oss/build modules
make[1]: Entering directory '/usr/lib/modules/3.14.2-1-ARCH/build'
Makefile:615: Cannot use CONFIG_CC_STACKPROTECTOR_STRONG: -fstack-protector-strong not supported by compiler
CC [M] /usr/lib/oss/build/osscore_wrapper.o
gcc: error：unrecognized command line option ‘-fstack-protector-strong’
scripts/Makefile.build:308: recipe for target '/usr/lib/oss/build/osscore_wrapper.o' failed
make[2]: *** [/usr/lib/oss/build/osscore_wrapper.o] Error 1
Makefile:1274: recipe for target '_module_/usr/lib/oss/build' failed
make[1]: *** [_module_/usr/lib/oss/build] Error 2
make[1]: Leaving directory '/usr/lib/modules/3.14.2-1-ARCH/build'
Makefile:17: recipe for target 'default' failed
make: *** [default] Error 2
Relinking the OSS kernel modules failed.
And the output of "ossdetect -v" is:
#ossdetect -v
Detected AMD High Definition Audio (Hudson)
USB support available in the system, adding USB driver
Detected Generic USB audio/MIDI device (BETA)
Last edited by archwdj (2014-05-09 11:50:33)

Not an installation issue. Moving to NC...
Also, archwdj, welcome to the forums. Please read the forum rules to make yourself aware of them. Use code tags when posting snippets.

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Please a simple problem but I don't know how to solve it. After installing 16 gb of ram all is good but when I turn on the computer it is a window signaling that all is correct. How is possible to delete once and for all that window? Thank you

Well then maybe you could take a screenshot because the appearance of such a window is news to me.
Also post your OS X version and what model Mac you have. The more detail, the better. Thanks.
To take a screenshot hold ⌘ Shift 4 to create a selection crosshair. Click and hold while you drag the crosshair over the area you wish to capture and then release the mouse or trackpad. You will hear a "camera shutter" sound. This will deposit a screenshot on your Desktop.
If you can't find it on your Desktop look in your Documents or Downloads folder.
When you post your response, click the "camera" icon above the text field:
This will display a dialog box which enables you to choose the screenshot file (remember it's on your Desktop) and click the Insert Image button.
⌘ Shift 4 and then pressing the space bar captures the frontmost window.
⌘ Shift 3 captures the entire screen.
Drag the screenshot to the Trash after you post your reply.

No sound after installing windows 8 on my hp 620 help

no sound after installing windows 8 on my hp 620 help
This question was solved.
View Solution.

I cannot find your audio driver on HP's support page, but I was able to locate this one, which is the same driver as yours, just the most recent version. According to what is listed, it supports Windows 8. Give it a shot and let me know if it works for you.
http://goo.gl/0IMBd
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

No sound after installing flash player 11.3.300.262, have mozilla 13.0.01, working fine with flash player 11.2.202.233

Have no sound after installing flash player 11.3.300.262. Working fine with flash player 11.2.202.232

hello, unfortunately this seems to be a bug in adobes flash plugin 11.3. please refer to the following forum entry on how to handle the issue or report the problem with your system details to adobe.
http://forums.adobe.com/message/4483563
https://bugbase.adobe.com/index.cfm?event=bug&id=3210964

Portege 3110ct has no sound after installing XP Pro

I'm a novice when it comes to laptops, so here is the problem: My 3110ct has no sound after installing XP Pro. Didn't have sound when I bought it with another operating system on, report says no sound device installed.
Does this mean I need to get a chip for the laptop or is it a driver I need & where can I find the part or the driver for this.
Please help.

Usually if the sound driver was not installed you will get no sound but also a yellow exclamation mark should appear in the device manager.
If the sound card chip is damage I presume you will be not able to see the yellow exclamation belonging to the sound card in the device manager.
You bought this Portg as a second hand unit. Am I right?
So possibly the sound card is faulty.
The computer uses a ESS ES1978 (Maestro-2E) and ES1918 sound chip.
Check if you can find an XP sound driver in the internet.

DV6-2005 No Sound after installing IDT Hi-def driver....

Hi everyone,
My os is win7 ultimate and i had to reinstall os due to some reason. the sound was working fine before the installing idt drivers but the mute/unmute light was'nt. However, After installing the driver everything is working fine(mute/unmute light) except there is no sound. I tried pretty much everything and still it doesnt work. Plz help, its really frustrating...

Uninstall IDT audio driver again from Your system.
Resources:
Uninstalling Software in Windows 7
Uninstall or change a program in Windows 7
Go to: Control Panel -> Devices Manager
Click with right button of Your mouse on each yellow sign with exclamation mark ( ) and choose properties. Then go to bottom details and paste here hardware id . This way we will know what it is.
Below You've got example how to do it:
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **

No sound after installing Adobe Flash 11.7

After installing the new Adobe Flash Player 11.7 I have no sound.
I reinstalled, uninstalled and started the imac new but I find no solution.
When I'm starting the imac, I always heard the opening sound.
After searching and contacting the support with no results, I try to turn
up the volume at the source and connect the soundsystem again and
now can hear the music.
I think Adobe reduce the sound of the source at zero, and the imac
rest on the last position.
I'm right? Many Thanks in advance.

Hello,
Long shot, but...
Open Audio Midi Setup in Applications>Utilities, see the input & output options & KHz setting there, some things will change it for their own use, then not set it back.

Slow after install/uninstall antivirus

My late 2013 iMac has been slow and unresponsive after install and uninstall Avira anti-virus (big mistake that was)! I tried re-installing Yosemite but that did not help. EtreCheck shows this in kernel extensions:
/System/Library/Extensions [not loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9)
However, I can't see that file with Finder or Terminal.
Is there anything I can try without doing a total clean install of OS X and then adding back all my files and apps?
Problem description:
Mac and Safari are slow - often get spinning beachball and failure to load a page.
EtreCheck version: 2.1.4 (107)
Report generated 18 December 2014 at 08:31:18 GMT+7
Click the [Support] links for help with non-Apple products.
Click the [Details] links for more information about that line.
Click the [Adware] links for help removing adware.
Hardware Information: ℹ️
iMac (21.5-inch, Late 2013) (Verified)
iMac - model: iMac14,3
1 2.9 GHz Intel Core i5 CPU: 4-core
8 GB RAM Upgradeable
BANK 0/DIMM0
4 GB DDR3 1600 MHz ok
BANK 1/DIMM0
4 GB DDR3 1600 MHz ok
Bluetooth: Good - Handoff/Airdrop2 supported
Wireless: en1: 802.11 a/b/g/n/ac
Video Information: ℹ️
NVIDIA GeForce GT 750M - VRAM: 1024 MB
iMac 1920 x 1080
System Software: ℹ️
OS X 10.10.1 (14B25) - Uptime: 10:57:6
Disk Information: ℹ️
APPLE HDD ST1000LM024 disk0 : (1 TB)
EFI (disk0s1) <not mounted> : 210 MB
iMac Macintosh HD (disk0s2) / : 999.35 GB (622.71 GB free)
Recovery HD (disk0s3) <not mounted> [Recovery]: 650 MB
USB Information: ℹ️
Apple Inc. FaceTime HD Camera (Built-in)
Apple Inc. BRCM20702 Hub
Apple Inc. Bluetooth USB Host Controller
Thunderbolt Information: ℹ️
Apple Inc. thunderbolt_bus
Gatekeeper: ℹ️
Mac App Store and identified developers
Kernel Extensions: ℹ️
/Applications/Parallels Desktop.app
[not loaded] com.parallels.kext.hidhook (8.0 18619.1001606) [Support]
[not loaded] com.parallels.kext.hypervisor (8.0 18619.1001606) [Support]
[not loaded] com.parallels.kext.netbridge (8.0 18619.1001606) [Support]
[not loaded] com.parallels.kext.usbconnect (8.0 18619.1001606) [Support]
[not loaded] com.parallels.kext.vnic (8.0 18619.1001606) [Support]
/Applications/WiTopia.app
[loaded] com.viscosityvpn.Viscosity.tap (1.0) [Support]
[loaded] com.viscosityvpn.Viscosity.tun (1.0) [Support]
/System/Library/Extensions
[not loaded] com.avira.kext.FileAccessControl (1.0.0d1 - SDK 10.9) [Support]
Launch Agents: ℹ️
[running] com.trusteer.rapport.rapportd.plist [Support]
Launch Daemons: ℹ️
[loaded] com.adobe.fpsaud.plist [Support]
[running] com.trusteer.rooks.rooksd.plist [Support]
[running] net.witopia.WiTopiaHelper.plist [Support]
User Launch Agents: ℹ️
[loaded] com.adobe.ARM.[...].plist [Support]
[loaded] com.google.keystone.agent.plist [Support]
User Login Items: ℹ️
iTunesHelper Application (/Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
WiTopia Application (/Applications/WiTopia.app)
Internet Plug-ins: ℹ️
AdobePDFViewerNPAPI: Version: 11.0.10 - SDK 10.6 [Support]
FlashPlayer-10.6: Version: 16.0.0.235 - SDK 10.6 [Support]
AdobePDFViewer: Version: 11.0.10 - SDK 10.6 [Support]
Flash Player: Version: 16.0.0.235 - SDK 10.6 [Support]
QuickTime Plugin: Version: 7.7.3
Default Browser: Version: 600 - SDK 10.10
User internet Plug-ins: ℹ️
Google Earth Web Plug-in: Version: 7.1 [Support]
Safari Extensions: ℹ️
1Password [Installed]
AdBlock [Installed]
Open in Internet Explorer [Installed]
Blur (Formerly DoNotTrackMe) [Installed]
3rd Party Preference Panes: ℹ️
Flash Player [Support]
Trusteer Endpoint Protection [Support]
Time Machine: ℹ️
Skip System Files: NO
Mobile backups: OFF
Auto backup: YES
Volumes being backed up:
iMac Macintosh HD: Disk size: 999.35 GB Disk used: 376.63 GB
Destinations:
Seagate 2TB Time Machine [Local]
Total size: 1.60 TB
Total number of backups: 33
Oldest backup: 2014-11-19 14:37:53 +0000
Last backup: 2014-12-18 01:13:49 +0000
Size of backup disk: Adequate
Backup size 1.60 TB > (Disk used 376.63 GB X 3)
Seagate blue slim time machine [Local]
Total size: 750.92 GB
Total number of backups: 35
Oldest backup: 2014-10-03 04:38:29 +0000
Last backup: 2014-12-17 14:08:04 +0000
Size of backup disk: Too small
Backup size 750.92 GB < (Disk used 376.63 GB X 3)
Top Processes by CPU: ℹ️
      3% WindowServer
      0% fontd
      0% AppleSpell
      0% com.apple.WebKit.WebContent
      0% cloudpaird
Top Processes by Memory: ℹ️
198 MB com.apple.WebKit.WebContent
137 MB WiTopia
129 MB mds_stores
129 MB Finder
120 MB WindowServer
Virtual Memory Information: ℹ️
4.15 GB Free RAM
2.31 GB Active RAM
1.25 GB Inactive RAM
870 MB Wired RAM
2.41 GB Page-ins
0 B Page-outs
Diagnostics Information: ℹ️
Dec 17, 2014, 09:36:00 PM discoveryd_2014-12-17-213600_[redacted].crash
Dec 17, 2014, 09:34:45 PM Self test - passed
Dec 15, 2014, 05:07:21 PM Safari_2014-12-15-170721_[redacted].hang

1. This procedure is a diagnostic test. It changes nothing, for better or worse, and therefore will not, in itself, solve the problem. But with the aid of the test results, the solution may take a few minutes, instead of hours or days.
Don't be put off by the complexity of these instructions. The process is much less complicated than the description. You do harder tasks with the computer all the time.
2. If you don't already have a current backup, back up all data before doing anything else. The backup is necessary on general principle, not because of anything in the test procedure. Backup is always a must, and when you're having any kind of trouble with the computer, you may be at higher than usual risk of losing data, whether you follow these instructions or not.
There are ways to back up a computer that isn't fully functional. Ask if you need guidance.
3. Below are instructions to run a UNIX shell script, a type of program. As I wrote above, it changes nothing. It doesn't send or receive any data on the network. All it does is to generate a human-readable report on the state of the computer. That report goes nowhere unless you choose to share it. If you prefer, you can act on it yourself without disclosing the contents to me or anyone else.
You should be wondering whether you can believe me, and whether it's safe to run a program at the behest of a stranger. In general, no, it's not safe and I don't encourage it.
In this case, however, there are a couple of ways for you to decide whether the program is safe without having to trust me. First, you can read it. Unlike an application that you download and click to run, it's transparent, so anyone with the necessary skill can verify what it does.
You may not be able to understand the script yourself. But variations of the script have been posted on this website thousands of times over a period of years. The site is hosted by Apple, which does not allow it to be used to distribute harmful software. Any one of the millions of registered users could have read the script and raised the alarm if it was harmful. Then I would not be here now and you would not be reading this message.
Nevertheless, if you can't satisfy yourself that these instructions are safe, don't follow them. Ask for other options.
4. Here's a summary of what you need to do, if you choose to proceed:
☞ Copy a line of text in this window to the Clipboard.
☞ Paste into the window of another application.
☞ Wait for the test to run. It usually takes a few minutes.
☞ Paste the results, which will have been copied automatically, back into a reply on this page.
The sequence is: copy, paste, wait, paste again. You don't need to copy a second time. Details follow.
5. You may have started the computer in "safe" mode. Preferably, these steps should be taken in “normal” mode, under the conditions in which the problem is reproduced. If the system is now in safe mode and works well enough in normal mode to run the test, restart as usual. If you can only test in safe mode, do that.
6. If you have more than one user, and the one affected by the problem is not an administrator, then please run the test twice: once while logged in as the affected user, and once as an administrator. The results may be different. The user that is created automatically on a new computer when you start it for the first time is an administrator. If you can't log in as an administrator, test as the affected user. Most personal Macs have only one user, and in that case this section doesn’t apply. Don't log in as root.
7. The script is a single long line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, though you may not see all of it in the browser window, and you can then copy it. If you try to select the line by dragging across the part you can see, you won't get all of it.
Triple-click anywhere in the line of text below on this page to select it:
PATH=/usr/bin:/bin:/usr/sbin:/sbin:/usr/libexec;clear;cd;p=(Software Hardware Memory Diagnostics Power FireWire Thunderbolt USB Fonts SerialATA 4 1000 25 5120 KiB/s 1024 85 \\b%% 20480 1 MB/s 25000 ports ' com.clark.\* \*dropbox \*genieo\* \*GoogleDr\* \*k.AutoCAD\* \*k.Maya\* vidinst\* ' DYLD_INSERT_LIBRARIES\ DYLD_LIBRARY_PATH -86 "` route -n get default|awk '/e:/{print $2}' `" 25 N\\/A down up 102400 25600 recvfrom sendto CFBundleIdentifier 25 25 25 1000 MB 'com.adobe.AAM.Updater-1.0 com.adobe.AAM.Updater-1.0 com.adobe.AdobeCreativeCloud com.adobe.CS4ServiceManager com.adobe.CS5ServiceManager com.adobe.fpsaud com.adobe.SwitchBoard com.adobe.SwitchBoard com.apple.aelwriter com.apple.AirPortBaseStationAgent com.apple.FolderActions.enabled com.apple.installer.osmessagetracing com.apple.mrt.uiagent com.apple.ReportCrash.Self com.apple.rpmuxd com.apple.SafariNotificationAgent com.apple.usbmuxd com.citrixonline.GoToMeeting.G2MUpdate com.google.keystone.agent com.google.keystone.daemon com.microsoft.office.licensing.helper com.oracle.java.Helper-Tool com.oracle.java.JavaUpdateHelper com.oracle.java.JavaUpdateHelper org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.privileged_startx org.macosforge.xquartz.startx' '879294308 4071182229 461455494 3627668074 1083382502 1274181950 1855907737 2758863019 1848501757 464843899 3694147963 1233118628 2456546649 2806998573 2778718105 2636415542 842973933 2051385900 3301885676 891055588 998894468 695903914 1443423563 4136085286 523110921 2883943871 3873345487' 51 5120 files );N5=${#p[@]};p[N5]=` networksetup -listnetworkserviceorder|awk ' NR>1 { sub(/^$[0-9]+$ /,"");n=$0;getline;} $NF=="'${p[26]}')" { sub(/.$/,"",$NF);print n;exit;} ' `;f=('\n%s: %s\n' '\n%s\n\n%s\n' '\nRAM details\n%s\n' %s\ %s '%s\n-\t%s\n' );S0() { echo ' { q=$NF+0;$NF="";u=$(NF-1);$(NF-1)="";gsub(/^ +| +$/,"");if(q>='${p[$1]}') printf("%s (UID %s) is using %s '${p[$2]}'",$0,u,q);} ';};s=(' s/[0-9A-Za-z._]+@[0-9A-Za-z.]+\.[0-9A-Za-z]{2,4}/EMAIL/g;/faceb/s/(at\.)[^.]+/\1NAME/g;/\/Shared/!s/(\/Users\/)[^ /]+/\1USER/g;s/[-0-9A-Fa-f]{22,}/UUID/g;' ' s/^ +//;/de: S|[nst]:/p;' ' {sub(/^ +/,"")};/er:/;/y:/&&$2<'${p[10]} ' 1s/://;3,6d;/[my].+:/d;s/^ {4}//;H;${ g;s/\n$//;/s: (E[^m]|[^EO])|x([^08]|02[^F]|8[^0])/p;} ' ' 5h;6{ H;g;/P/!p;} ' ' ($1~/^Cy/&&$3>'${p[11]}')||($1~/^Cond/&&$2!~/^N/) ' ' /:$/{ N;/:.+:/d;s/ *://;b0'$'\n'' };/^ *(V.+ [0N]|Man).+ /{ s/ 0x.... //;s/[()]//g;s/(.+: )(.+)/ (\2)/;H;};$b0'$'\n'' d;:0'$'\n'' x;s/\n\n//;/Apple[ ,]|Genesy|Intel|SMSC/d;s/\n.*//;/\)$/p;' ' s/^.*C/C/;H;${ g;/No th|pms/!p;} ' '/= [^GO]/p' '{$1=""};1' ' /Of/!{ s/^.+is |\.//g;p;} ' ' $0&&!/ / { n++;print;} END { if(n<10) print "com.apple.";} ' ' { sub(/ :/,"");print|"tail -n'${p[12]}'";} ' ' NR==2&&$4<='${p[13]}' { print $4;} ' ' END { $2/=256;if($2>='${p[15]}') print int($2) } ' ' NR!=13{next};{sub(/[+-]$/,"",$NF)};'"`S0 21 22`" 'NR!=2{next}'"`S0 37 17`" ' NR!=5||$8!~/[RW]/{next};{ $(NF-1)=$1;$NF=int($NF/10000000);for(i=1;i<=3;i++){$i="";$(NF-1-i)="";};};'"`S0 19 20`" 's:^:/:p' '/\.kext\/(Contents\/)?Info\.plist$/p' 's/^.{52}(.+) <.+/\1/p' ' /Launch[AD].+\.plist$/ { n++;print;} END { if(n<200) print "/System/";} ' '/\.xpc\/(Contents\/)?Info\.plist$/p' ' NR>1&&!/0x|\.[0-9]+$|com\.apple\.launchctl\.(Aqua|Background|System)$/ { print $3;} ' ' /\.(framew|lproj)|\):/d;/plist:|:.+(Mach|scrip)/s/:.+//p ' '/^root$/p' ' !/\/Contents\/.+\/Contents|Applic|Autom|Frameworks/&&/Lib.+\/Info.plist$/ { n++;print;} END { if(n<1100) print "/System/";} ' '/^\/usr\/lib\/.+dylib$/p' ' /Temp|emac/{next};/(etc|Preferences|Launch[AD].+)\// { sub(".(/private)?","");n++;print;} END { split("'"${p[41]}"'",b);split("'"${p[42]}"'",c);for(i in b) print b[i]".plist\t"c[i];if(n<500) print "Launch";} ' ' /\/(Contents\/.+\/Contents|Frameworks)\/|\.wdgt\/.+\.([bw]|plu)/d;p;' 's/\/(Contents\/)?Info.plist$//;p' ' { gsub("^| |\n","\\|\\|kMDItem'${p[35]}'=");sub("^...."," ") };1 ' p '{print $3"\t"$1}' 's/\'$'\t''.+//p' 's/1/On/p' '/Prox.+: [^0]/p' '$2>'${p[43]}'{$2=$2-1;print}' ' BEGIN { i="'${p[26]}'";M1='${p[16]}';M2='${p[18]}';M3='${p[31]}';M4='${p[32]}';} !/^A/{next};/%/ { getline;if($5<M1) a="user "$2"%, system "$4"%";} /disk0/&&$4>M2 { b=$3" ops/s, "$4" blocks/s";} $2==i { if(c) { d=$3+$4+$5+$6;next;};if($4>M3||$6>M4) c=int($4/1024)" in, "int($6/1024)" out";} END { if(a) print "CPU: "a;if(b) print "I/O: "b;if(c) print "Net: "c" (KiB/s)";if(d) print "Net errors: "d" packets/s";} ' ' /r\[0\] /&&$NF!~/^1(0|72\.(1[6-9]|2[0-9]|3[0-1])|92\.168)\./ { print $NF;exit;} ' ' !/^T/ { printf "(static)";exit;} ' '/apsd|BKAg|OpenD/!s/:.+//p' ' (/k:/&& $3!~/(255\.){3}0/)||(/v6:/&&$2!~/A/) ' ' $1~"lR"&&$2<='${p[25]}';$1~"li"&&$3!~"wpa2";' ' BEGIN { FS=":";p="uniq -c|sed -E '"'s/ +\$[0-9]+\$\$.+\$/\\\2 x\\\1/;s/x1$//'"'";} { n=split($3,a,".");sub(/_2[01].+/,"",$3);print $2" "$3" "a[n]$1|p;b=b$1;} END { close(p);if(b) print("\n\t* Code injection");} ' ' NR!=4{next} {$NF/=10240} '"`S0 27 14`" ' END { if($3~/[0-9]/)print$3;} ' ' BEGIN { L='${p[36]}';} !/^[[:space:]]*(#.*)?$/ { l++;if(l<=L) f=f"\n   "$0;} END { F=FILENAME;if(!F) exit;if(!f) f="\n   [N/A]";"cksum "F|getline C;split(C, A);C="checksum "A[1];"file -b "F|getline T;if(T~/^Apple b/) { f="";l=0;while("PlistBuddy -c Print "F|getline g) { l++;if(l<=L) f=f"\n   "g;};};if(T!~/^(AS.+ (En.+ )?text(, with v.+)?$|(Bo|PO).+ sh.+ text ex|XM)/) F=F" ("T", "C")";else F=F" ("C")";printf("\nContents of %s\n%s\n",F,f);if(l>L) printf("\n   ...and %s more line(s)\n",l-L);} ' ' s/^ ?n...://p;s/^ ?p...:/-'$'\t''/p;' 's/0/Off/p' ' END{print NR} ' ' /id: N|te: Y/{i++} END{print i} ' ' / / { print "'"${p[28]}"'";exit;};1;' '/ en/!s/\.//p' ' NR!=13{next};{sub(/[+-M]$/,"",$NF)};'"`S0 39 40`" ' $10~/$L/&&$9!~"localhost" { sub(/.+:/,"",$9);print $1": "$9|"sort|uniq";} ' '/^ +r/s/.+"(.+)".+/\1/p' 's/(.+\.wdgt)\/(Contents\/)?Info\.plist$/\1/p' 's/^.+\/(.+)\.wdgt$/\1/p' ' /l: /{ /DVD/d;s/.+: //;b0'$'\n'' };/s: /{ /V/d;s/^ */- /;H;};$b0'$'\n'' d;:0'$'\n'' x;/APPLE [^:]+$/d;p;' ' /^find: /d;p;' "`S0 44 45`" ' BEGIN{FS="= "} /Path/{print $2} ' ' /^ *$/d;s/^ */   /;' ' s/^.+ |\(.+$$//g;p ' '/\.(appex|pluginkit)\/Contents\/Info\.plist$/p' ' /2/{print "WARN"};/4/{print "CRITICAL"};' ' /EVHF|MACR|^s/d;s/^.+: //p;' ' $3~/^[1-9][0-9]{0,2}(\.[1-9][0-9]{0,2}){2}$/ { i++;n=n"\n"$1"\t"$3;} END { if(i>1) print n;} ' ' /\.framework$/&&!/\/Contents\// { n++;print;} END { if(n<400) print "/System/";} ' ' { gsub(/[()"]/,"",$3);print $3;} ' );c1=(system_profiler pmset\ -g nvram fdesetup find syslog df vm_stat sar ps crontab iotop top pkgutil 'PlistBuddy 2>&1 -c "Print' whoami cksum kextstat launchctl smcDiagnose sysctl\ -n defaults\ read stat lsbom mdfind ' for i in ${p[24]};do ${c1[18]} ${c2[27]} $i;done;' pluginkit scutil dtrace profiles sed\ -En awk /S*/*/P*/*/*/C*/*/airport networksetup mdutil lsof test osascript\ -e netstat mdls );c2=(com.apple.loginwindow\ LoginHook '" /L*/P*/loginw*' "'tell app \"System Events\" to get properties of login items'|tr , \\\n" 'L*/Ca*/com.ap*.Saf*/E*/* -d 1 -name In*t -exec '"${c1[14]}"' :CFBundleDisplayName" {} \;|sort|uniq' '~ $TMPDIR.. $ -flags +sappnd,schg,uappnd,uchg -o ! -user $UID -o ! -perm -600 $' '.??* -path .Trash -prune -o -type d -name *.app -print -prune' :${p[35]}\" :Label\" '{/,}L*/{Con,Pref}* -type f ! -size 0 -name *.plist -exec plutil -s {} \;' "-f'%N: %l' Desktop L*/Keyc*" therm sysload boot-args status " -F '\$Time \$(RefProc): \$Message' -k Sender Req 'fsev|kern|launchd' -k RefProc Rne 'Aq|WebK' -k Message Rne 'Goog|ksadm|probe|Roame|SMC:|smcD|sserti|suhel| VALI|ver-r|xpma' -k Message Req 'abn|bad |Beac|caug|corru|dead[^bl]|FAIL|fail|GPU |hfs: Ru|idle ex|inval|jnl:|last value [1-9]|NVDA$|pagin|pci pa|proc: t|Roamed|rror|SL|TCON|Throttli|tim(ed? ?|ing )o|WARN' " '-du -n DEV -n EDEV 1 10' 'acrx -o comm,ruid,%cpu' '-t1 10 1' '-f -pfc /var/db/r*/com.apple.*.{BS,Bas,Es,J,OSXU,Rem,up}*.bom' '{/,}L*/Lo*/Diag* -type f -regex .\*[cght] ! -name .?\* ! -name \*ag \( -exec grep -lq "^Thread c" {} \; -exec printf \* \; -o -true $ -execdir stat -f:%Sc:%N -t%F {} \;|sort -t: -k2 |tail -n'${p[38]} '/S*/*/Ca*/*xpc* >&- ||echo No' '-L /{S*/,}L*/StartupItems -type f -exec file {} +' '-L /S*/L*/{C*/Sec*A,Ex}* {/,}L*/{A*d,Ca*/*/Ex,Co{mpon,reM},Ex,In{p,ter},iTu*/*P,Keyb,Mail/B,Pr*P,Qu*T,Scripti,Sec,Servi,Spo,Widg}* -path \\*s/Resources -prune -o -type f -name Info.plist' '/usr/lib -type f -name *.dylib' `awk "${s[31]}"<<<${p[23]}` "/e*/{auto,{cron,fs}tab,hosts,{[lp],sy}*.conf,mach_i*/*,pam.d/*,ssh{,d}_config,*.local} {,/usr/local}/etc/periodic/*/* /L*/P*{,/*}/com.a*.{Bo,sec*.ap}*t {/S*/,/,}L*/Lau*/*t .launchd.conf" list getenv /Library/Preferences/com.apple.alf\ globalstate --proxy '-n get default' -I --dns -getdnsservers\ "${p[N5]}" -getinfo\ "${p[N5]}" -P -m\ / '' -n1 '-R -l1 -n1 -o prt -stats command,uid,prt' '--regexp --files com.apple.pkg.*|sort|uniq' -kl -l -s\ / '-R -l1 -n1 -o mem -stats command,uid,mem' '+c0 -i4TCP:0-1023' com.apple.dashboard\ layer-gadgets '-d /L*/Mana*/$USER&&echo On' '-app Safari WebKitDNSPrefetchingEnabled' "+c0 -l|awk '{print(\$1,\$3)}'|sort|uniq -c|sort -n|tail -1|awk '{print(\$2,\$3,\$1)}'" -m 'L*/{Con*/*/Data/L*/,}Pref* -type f -size 0c -name *.plist.???????|wc -l' kern.memorystatus_vm_pressure_level '3>&1 >&- 2>&3' " -F '\$Time \$Message' -k Sender kernel -k Message CSeq 'n Cause: -' " -i 'kMDItemContentType=com.apple.framework|sort' -name\ kMDItem${p[35]} );N1=${#c2[@]};for j in {0..9};do c2[N1+j]=SP${p[j]}DataType;done;N2=${#c2[@]};for j in 0 1;do c2[N2+j]="-n ' syscall::'${p[33+j]}':return { @out[execname,uid]=sum(arg0) } tick-10sec { trunc(@out,1);exit(0);} '";done;l=(Restricted\ files Hidden\ apps 'Elapsed time (s)' POST Battery Safari\ extensions Bad\ plists 'High file counts' User Heat System\ load boot\ args FileVault Diagnostic\ reports Log 'Free space (MiB)' 'Swap (MiB)' Activity 'CPU per process' Login\ hook 'I/O per process' Mach\ ports kexts Daemons Agents XPC\ cache Startup\ items Admin\ access Root\ access Bundles dylibs Apps Font\ issues Inserted\ dylibs Firewall Proxies DNS TCP/IP Wi-Fi Profiles Root\ crontab User\ crontab 'Global login items' 'User login items' Spotlight Memory Listeners Widgets Parental\ Controls Prefetching SATA Descriptors App\ extensions Lockfiles Memory\ pressure SMC Shutdowns Nets Frameworks );N3=${#l[@]};for i in 0 1 2;do l[N3+i]=${p[5+i]};done;N4=${#l[@]};for j in 0 1;do l[N4+j]="Current ${p[29+j]}stream data";done;A0() { id -G|grep -qw 80;v[1]=$?;((v[1]==0))&&sudo true;v[2]=$?;v[3]=`date +%s`;clear >&-;date '+Start time: %T %D%n';};for i in 0 1;do eval ' A'$((1+i))'() { v=` eval "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};A'$((3+i))'() { v=` while read i;do [[ "$i" ]]&&eval "${c1[$1]} ${c2[$2]}" \"$i\"|'${c1[30+i]}' "${s[$3]}";done<<<"${v[$4]}" `;[[ "$v" ]];};A'$((5+i))'() { v=` while read i;do '${c1[30+i]}' "${s[$1]}" "$i";done<<<"${v[$2]}" `;[[ "$v" ]];};A'$((7+i))'() { v=` eval sudo "${c1[$1]} ${c2[$2]}"|'${c1[30+i]}' "${s[$3]}" `;[[ "$v" ]];};';done;A9(){ v=$((`date +%s`-v[3]));};B2(){ v[$1]="$v";};for i in 0 1;do eval ' B'$i'() { v=;((v['$((i+1))']==0))||{ v=No;false;};};B'$((3+i))'() { v[$2]=`'${c1[30+i]}' "${s[$3]}"<<<"${v[$1]}"`;} ';done;B5(){ v[$1]="${v[$1]}"$'\n'"${v[$2]}";};B6() { v=` paste -d: <(printf "${v[$1]}") <(printf "${v[$2]}")|awk -F: ' {printf("'"${f[$3]}"'",$1,$2)} ' `;};B7(){ v=`grep -Fv "${v[$1]}"<<<"$v"`;};C0() { [[ "$v" ]]&&sed -E "$s"<<<"$v";};C1() { [[ "$v" ]]&&printf "${f[$1]}" "${l[$2]}" "$v"|sed -E "$s";};C2() { v=`echo $v`;[[ "$v" != 0 ]]&&C1 0 $1;};C3() { v=`sed -E "${s[63]}"<<<"$v"`&&C1 1 $1;};for i in 1 2 7 8;do for j in 0 2 3;do eval D$i$j'(){ A'$i' $1 $2 $3; C'$j' $4;};';done;done;{ A0;D20 0 $((N1+1)) 2;D10 0 $N1 1;B0;C2 27;B0&&! B1&&C2 28;D12 15 37 25 8;A1 0 $((N1+2)) 3;C0;D13 0 $((N1+3)) 4 3;D23 0 $((N1+4)) 5 4;D13 0 $((N1+9)) 59 50;for i in 0 1 2;do D13 0 $((N1+5+i)) 6 $((N3+i));done;D13 1 10 7 9;D13 1 11 8 10;B1&&D73 19 53 67 55;D22 2 12 9 11;D12 3 13 10 12;D23 4 19 44 13;D23 5 54 12 56;D23 5 14 12 14;D22 6 36 13 15;D22 20 52 66 54;D22 7 37 14 16;D23 8 15 38 17;D22 9 16 16 18;B1&&{ D82 35 49 61 51;D82 11 17 17 20;for i in 0 1;do D82 28 $((N2+i)) 45 $((N4+i));done;};D22 12 44 54 45;D22 12 39 15 21;A1 13 40 18;B2 4;B3 4 0 19;A3 14 6 32 0;B4 0 5 11;A1 17 41 20;B7 5;C3 22;B4 4 6 21;A3 14 7 32 6;B4 0 7 11;B3 4 0 22;A3 14 6 32 0;B4 0 8 11;B5 7 8;B1&&{ A8 18 26 23;B7 7;C3 23;};A2 18 26 23;B7 7;C3 24;D13 4 21 24 26;B4 4 12 26;B3 4 13 27;A1 4 22 29;B7 12;B2 14;A4 14 6 52 14;B2 15;B6 14 15 4;B3 0 0 30;C3 29;A1 4 23 27;B7 13;C3 30;B4 4 22 69;A1 24 56 32;B7 22;B2 23;A4 39 57 70 23;B2 24;B6 23 24 4;C3 58;B3 4 0 65;A3 14 6 32 0;B4 0 16 11;A1 26 50 64;B7 16;C3 52;D13 24 24 32 31;D13 25 37 32 33;A2 23 18 28;B2 16;A2 16 25 33;B7 16;B3 0 0 34;B2 21;A6 47 21&&C0;B1&&{ D73 21 0 32 19;D73 10 42 32 40;D82 29 35 46 39;};D23 14 1 62 42;D12 34 43 53 44;D12 22 20 32 25;D22 0 $((N1+8)) 51 32;D13 4 8 41 6;D12 21 28 35 34;D13 27 29 36 35;A2 27 32 39&&{ B2 19;A2 33 33 40;B2 20;B6 19 20 3;};C2 36;D23 38 55 68 57;D23 33 34 42 37;B1&&D83 35 45 55 46;D23 32 31 43 38;D12 36 47 32 48;D13 10 42 32 41;D13 37 2 48 43;D13 4 5 32 1;D13 4 3 60 5;D12 21 48 49 49;B3 4 22 57;A1 21 46 56;B7 22;B3 0 0 58;C3 47;D22 4 4 50 0;D12 4 51 32 53;D23 22 9 37 7;A9;C2 2;} 2>/dev/null|pbcopy;exit 2>&-
Copy the selected text to the Clipboard by pressing the key combination command-C.
8. Launch the built-in Terminal application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
Click anywhere in the Terminal window and paste by pressing command-V. The text you pasted should vanish immediately. If it doesn't, press the return key.
9. If you see an error message in the Terminal window such as "Syntax error" or "Event not found," enter
exec bash
and press return. Then paste the script again.
10. If you're logged in as an administrator, you'll be prompted for your login password. Nothing will be displayed when you type it. You will not see the usual dots in place of typed characters. Make sure caps lock is off. Type carefully and then press return. You may get a one-time warning to be careful. If you make three failed attempts to enter the password, the test will run anyway, but it will produce less information. In most cases, the difference is not important. If you don't know the password, or if you prefer not to enter it, press the key combination control-C or just press return three times at the password prompt. Again, the script will still run.
If you're not logged in as an administrator, you won't be prompted for a password. The test will still run. It just won't do anything that requires administrator privileges.
11. The test may take a few minutes to run, depending on how many files you have and the speed of the computer. A computer that's abnormally slow may take longer to run the test. While it's running, there will be nothing in the Terminal window and no indication of progress. Wait for the line
[Process completed]
to appear. If you don't see it within half an hour or so, the test probably won't complete in a reasonable time. In that case, close the Terminal window and report what happened. No harm will be done.
12. When the test is complete, quit Terminal. The results will have been copied to the Clipboard automatically. They are not shown in the Terminal window. Please don't copy anything from there. All you have to do is start a reply to this comment and then paste by pressing command-V again.
At the top of the results, there will be a line that begins with the words "Start time." If you don't see that, but instead see a mass of gibberish, you didn't wait for the "Process completed" message to appear in the Terminal window. Please wait for it and try again.
If any private information, such as your name or email address, appears in the results, anonymize it before posting. Usually that won't be necessary.
13. When you post the results, you might see an error message on the web page: "You have included content in your post that is not permitted," or "You are not authorized to post." That's a bug in the forum software. Please post the test results on Pastebin, then post a link here to the page you created.
14. This is a public forum, and others may give you advice based on the results of the test. They speak only for themselves, and I don't necessarily agree with them.
Copyright © 2014 by Linc Davis. As the sole author of this work, I reserve all rights to it except as provided in the Use Agreement for the Apple Support Communities website ("ASC"). Readers of ASC may copy it for their own personal use. Neither the whole nor any part may be redistributed.

Loss of all sound after installing iTunes 7.7

I was not having any problems with iTunes and was converting old vinyl records to CD's. When the converting software opened up iTunes, a dialog box asked if I wanted to install iTunes 7.7 I then installed iTunes 7.7. After doing so I had no sounds on my computer. I uninstalled Quick Time and reinstalled it--still no sounds. I uninstalled iTunes--still no sounds. I did several system restores--still no sounds. I reinstalled iTunes---still no sounds. Is is possible to install an earlier version of iTunes?

Okay. Try heading into your Control Panel and launching your Sounds and Audio Devices control panel. Click the Audio tab.
Is the correct default device showing up in your "Sound playback" area?

[Solved] No sound after resuming from suspend

After suspending and resuming I no longer have any sound output (through headphone jack or my laptop speaker). The laptop is a toshiba portege r835. I can't say how long this has been happening, since I've only tried to play any sounds after resuming recently.
Searching the forums I found the following thread: https://bbs.archlinux.org/viewtopic.php?id=151001
I haven't tried this because it isn't exactly the same problem, but mostly because I'm currently stuck on kernel 3.5.6 because of the sandy bridge power regression issues.
Does anyone have any other ideas on how to possibly fix this problem?
Thanks!!
Last edited by twistedcubic (2012-12-31 22:20:20)

Solved, sort of.
I had some double suspend issue: I had set up suspend with systemd before using xfce and then after installing xfce I set my power settings so that the computer would suspend after shutting the lid, so I would have to open the lid, shut it, and then open it again for the computer to actually resume. After turning off the suspend setting in the xfce power manager, and just using the systemd suspend, the sound works fine on resume (both headphones and speakers)!

No Sound after installing Xfce

Hello, I'm having a strange problem. After installing xfce I've got no sound in my system. I have an Asus Xonar DX and usually the only thing I needed to do after installing a new system was to select it in the audio controller but this time it doesn't work. I tried uninstalling xfce4-mixer and install paprefs pavucontrol and set the card there but it doesn' t work and I don't know what else to try.
http://i60.tinypic.com/6i6wcl.png
Any help would be really appreciated. Thanks.
-- mod edit: read the Forum Etiquette and only post thumbnails http://wiki.archlinux.org/index.php/For … s_and_Code [jwr] --

Herbalist wrote:Muting S/PDIF in alsamixer seemed to fix this problem as suggested in this thread https://bbs.archlinux.org/viewtopic.php?id=156502
How do I do that ?
http://es.tinypic.com/r/250nywj/8

[SOLVED] No sound after installing/uninstalling gnome

Similar Messages

Maybe you are looking for