[SOLVED] No sound after plug out the headphone

The computer act weird suddenly that, if I plug in the headphone, I can hear the sound from the headphone. But if I plug out, there is no sound from speaker and headphone.
Before the problem appear, the sound icon at the system tray has two states of volume: one for the speaker if the headphone is not plugged in; the other for the headphone if it is plugged in.
But now, the sound icon appeared is always the volume for the headphone.
How to solve this?
Last edited by allencch (2013-09-24 11:04:43)

I just solved the problem by disable Auto Mute from alsamixer. I am not sure what has happened, but disable Auto Mute solves the problem.

Similar Messages

  • Shutdown after plug out the power supply

    Everytime I plug out the power the MacBook shuts down. The battery is shown full. Any ideas?

    Hi,
    Try resetting the PMU by turning off the MacBook, taking out the battery, and holding down the power button for 10 seconds. Put thebattery back in, and reboot while holding down the Command - Option - P - R buttons until you hear three beeps. Then restart and try again. Let me know what happens, hopefully that will fix it. If it doesn't, then something is either wrong with the MacBook or the battery.
    Hope this helps.
    -MRCUR

  • When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. What is the solution?

    When I make call I cannot hear the sound from the built in speaker. I need to switch on the loudspeaker or I have to plug in the headphone. Due to this I cannot even use Siri, Voice message recorder or even Tom Cat applications. What is the solution?

    http://support.apple.com/kb/TS1630

  • Music only plays thru the speakers by inserting a plug in the headphone jack. pavilion dv6-6127cl

    HP Pavilion dv6-6127cl  (Notebook PC)
    I have spent over 6 hours on the phone with tech support, but I remain unable to have any sounds go directly to my built-in "Beats" speakers.   I can make the speakers work if I insert a plug into the headphone jack on the keft side of the notebook.  If I plug in headphones to listen, I do get sound out of my headphones, but I also get sounds out of the builr-in soeakers.  Tech Support insisted that either I spilled liquid onto my keyboard. (I did not),  I dropped the notbook. (I did not), or the my computer was infected with a virus.
    I doubt that this problem was virus related, because the problem happened during a 4 month period that I had no internet service.  To be certain there are no viruses, I took the extreme action of restoring my notebook to the factory condition.  I still have the same problem.
    During my 6 hour troubleshooting marathon, the support technician had me update my BIOS and initiate many lengthy self-test procedures, all to no avail.
    Please send me information on who to send this laptop to for repair or replacement under the original warranty.
    I also have another issue.  Tech support claims that my notebook warranty expires in November, but I purchased this notebook from Sam's Club brand-new, in an un-opened box in mid-January 2012.  How can this date be explained and/or corrected?
    Many Thanks,
    Mike McKinney
    Rockledge, FL.
    USA
    (321) 636-3500

    Hello spl1080,
    Your headphone jack is not working correctly on the laptop.
    Was everything working correctly before you upgraded to Windows 8?
    I know that you said that you updated the driver, but did you try the driver for Windows 7 and 8.
    Here are the links for the drivers.
    Windows 7
    Windows 8
    If you are planning on sending it in to HP to have it repaired they will make you run a recovery before you send it in.
    Clicking the White Kudos star on the left is a way to say Thanks!
    Let me know how everything goes.
    Have a good day.

  • My daughtrts ipad 2 only recognises headphones. and the internal speaker will not work. we have reset the system  three times, cleaned out the headphone jack, and  chrckrd the side switch above the volume. alos we ensured it was not in do not disturb mode

    On our ipad the speaker has quit working. Sound is only heard when you have head phones plugged in. We have reset the system three times cleaned out the headphone jack. Changed languages and rest but nothing works. This ipad is important to our daughter it is her tool to communicate with us and now it is not working please help

    You've done well with troubleshooting so far. Next step would be to back up and then restore from iTunes. Good luck!

  • I have a 2nd or 3rd generation iPod touch. Recently, it doesn't recognize headphones and will only play music through it's speakers. I've tried cleaning the area where you plug in the headphones but this has not helped. What should I do?

    My ipod touch (2nd or 3rd generation) won't recognize headphones anymore! I have'nt gotten it wet or dropped it. I've tried cleaning out the plug where you plug the headphones in. I've had no luck. Is this fixable or is it time to trash this iPod?

    - Try cleaning out/blowing out the headphone jack. Try inserting/removing the plug a dozen times or so. There is a little switch in the headphone jack that disconnects the speaker when the headphone jack is inserted.
    Try the following to rule out a software problem
    - Reset the iOS device. Nothing will be lost
    Reset iPod touch: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Reset all settings
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup
    - Restore to factory settings/new iOS device.
    - Make an appointment at the Genius Bar of an Apple store. Seems you have a bad headphone jack.
    Apple Retail Store - Genius Bar
    If not under warranty Apple will exchange your iPod for a refurbished one for this price. They do not fix yours.
    Apple - iPod Repair price                  
    A third-party place like the following will replace the jack for less. Google for more.
    iPhone Repair, Service & Parts: iPod Touch, iPad, MacBook Pro Screens
    Replace the jack yourself
    iPod Touch Repair – iFixit
    It i likely not worth getting it fixed if a bad headphone jack

  • My Apple iPod Nano stops playing shortly after plugging in the correct headset, but works on docking station. I've tried enabling and disabling crossfade in settings. Any suggestions?

    My apple ipod Nano stops playing shortly after plugging in the correct headset. I've tried enabling and disabling crossfade in settings. Any suggestions?

    Make sure your headphones are plugged ALL the way in, meaning the white part of the headphones is flush with the Nano and you cannot see any silver from the plug still showing.
    B-rock

  • I have just bought iphone 4 and when I make calls i don't hear anything from the headset excep when i plug in the headphones or turn on speaker ?

    I have just bought iphone 4 and when I make calls i don't hear anything from the headset excep when i plug in the headphones or turn on speaker ?

    I have the same problem. It only started a few days ago. When I make or receive calls I have to use speaker otherwise I can't hear a thing. I'm also pretty sure that when I try to make calls without the speaker turned on, it doesn't actually dial, but the display says it has.
    I've tried restoring from a backup with no luck. I'm reluctant to restore as a new phone as it's such a pain.

  • I am planning on buying an iPad 4 16GB, So I wanted to ask that after taking out the storage consumed by the system and system apps, How much storage will I be left with?

    I am planning on buying an iPad 4 16GB, So I wanted to ask that after taking out the storage consumed by the system and system apps, How much storage will I be left with?

    16GB vs 32GB vs 64GB: Which new iPad storage capacity should you get?
    http://www.imore.com/2012/03/08/16gb-32gb-64gb-ipad-capacity/
    How much content will fit on my iPod or iPhone?
    http://support.apple.com/kb/HT1867
     Cheers, Tom

  • Plugin-Container keeps playing video sound after I close the tab/window

    Plugin-Container keeps playing video sound after I close the tab/window. I have to shut down the process to make the sound stop.

    Try disabling hardware acceleration. Many visual bugs can be attributed to issues with graphics drivers.
    (Firefox -> Options -> Advanced -> General -> [ ] Use hardware acceleration when available)

  • Macbook Air plays random sounds after plugging in headphones

    Is it just me?
    Every time I plug something into the headphone socket on my 2012 Macbook Air it plays a random series of system sounds - usually alerts and "email whoosh".
    Thanks.
    JC

      Reset PRAM:   http://support.apple.com/kb/PH14222
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the appropriate method.
    "Resetting SMC on portables with a battery you should not remove on your own".

  • [Solved]no sound after suspend/resume after kernel 3.9.2 upgrade

    I don't know  what to provide to help solve this problem. Leave me messages.Thank you!
    Last edited by chu887 (2013-06-06 08:54:16)

    johni wrote:
    I got mine working!
    First I commented out the module parameter from my /etc/modprobe.d//intel-hda-audio.conf:
    #options snd-hda-intel model=dell-eq
    Since it works without that now, I will probably remove the file.
    Next, I went into alsamixer, and noticed a couple items not there before, turned down low:
    "Speaker", and two "HeadPhone" mixers, both turned down almost off.  I turned up the volume on the speaker, and was able to get sound from the speakers.   The same worked for the headphone entries (I have two headphone jacks).
    After I did this, it works better than before because I used to only have one working headphone jack.
    Also, I confirmed sound is still working after suspend/resume for me.
    Hopefully this will help one of you.
    Thanks,the problem has been resolved by downgrade.
    Sound is absolutely normal before I suspend/resume my system,  volume is normal, not too large,not too little. But there's no sound at all after resume it .  I guess it's probably to have something to do with our audio card - HDA intel,  my computer is also a dell laptop( dell 1420 , 2007/2008, really old ).
    My advice is : don't upgrade to kernel 3.9.2 ,it's an odd version( odd version is not stable).

  • No sound after getting soup in headphone jack

    I accidentally spilled soup on my iPhone 4S and some of it got into the headphone jack. I cleaned all the soup out, but now my speakers don't work and I can't hear anything without my headphones. When I try and turn up/down the volume, the sound icon appears and says "headphones" even when my headphones aren't plugged in.
    So could someone please tell me how much approximately it would cost to fix my phone? I'm not sure if I need a new headphone jack or speakers or if they're the same thing. Any information you can give me would be much appreciated.

    Apple do not repair they exchange for a factory refurbished unit
    In US for an iPhone 4S   $199(  £159)

  • [Solved] No sound after upgrade

    After an upgrade I get no sound out of my speakers. Following packages have been upgraded:
    [2011-08-11 09:38] Running 'pacman -Sy'
    [2011-08-11 09:38] synchronizing package lists
    [2011-08-11 09:39] Running 'pacman -S testing/filesystem testing/dash testing/wget extra/gstreamer0.10-good extra/imagemagick extra/gstreamer0.10-base extra/gstreamer0.10-base-plugins extra/gstreamer0.10-good-plugins extra/flac extra/libogg extra/libisofs extra/ghostscript extra/libburn'
    [2011-08-11 09:39] warning: /etc/fstab installed as /etc/fstab.pacnew
    [2011-08-11 09:39] upgraded filesystem (2011.04-1 -> 2011.08-1)
    [2011-08-11 09:39] upgraded dash (0.5.7-1 -> 0.5.7-2)
    [2011-08-11 09:39] upgraded wget (1.12-7 -> 1.13-1)
    [2011-08-11 09:39] upgraded gstreamer0.10-base (0.10.34-1 -> 0.10.35-1)
    [2011-08-11 09:39] upgraded gstreamer0.10-good (0.10.29-1 -> 0.10.30-1)
    [2011-08-11 09:39] upgraded imagemagick (6.7.1.0-1 -> 6.7.1.3-1)
    [2011-08-11 09:39] upgraded gstreamer0.10-base-plugins (0.10.34-1 -> 0.10.35-1)
    [2011-08-11 09:39] upgraded libogg (1.2.2-1 -> 1.3.0-1)
    [2011-08-11 09:39] upgraded flac (1.2.1-2 -> 1.2.1-3)
    [2011-08-11 09:39] upgraded gstreamer0.10-good-plugins (0.10.29-1 -> 0.10.30-1)
    [2011-08-11 09:39] upgraded libisofs (1.1.2-1 -> 1.1.4-1)
    [2011-08-11 09:39] upgraded ghostscript (9.02-2 -> 9.04-2)
    [2011-08-11 09:39] upgraded libburn (1.1.0.pl01-1 -> 1.1.4-1)
    [2011-08-11 09:40] Running 'pacman -U /tmp/yaourt-tmp-photon-new/PKGDEST.JIQ/flashplugin-beta-11.0.1.98-1-i686.pkg.tar.xz'
    [2011-08-11 09:40] upgraded flashplugin-beta (11.0.1.60-2 -> 11.0.1.98-1)
    [2011-08-11 09:41] Running 'pacman -R esound'
    [2011-08-11 09:41] removed esound (0.2.41-2)
    [2011-08-11 09:41] Running 'pacman -R audiofile'
    [2011-08-11 09:41] removed audiofile (0.2.7-1)
    Concerning the last lines: I removed esound and audiofile because pacman reported that it isn't used by any package any more. Maybe also interesting: I still have kernel 2.6.39 installed since I had some issues with 3.0. Maybe something has been changed to work with 3.0 and is broken with 2.6 now?
    I don't really know how to start troubleshooting.  speaker-test -c 2 doesn't produce any sound. Restarting alsa seems succesfull but doesn't make the sound appear, too. The loaded modules seem fine, too:
    $ lsmod |grep snd
    snd_mpu401 3824 0
    snd_cs4236 22423 0
    snd_emu10k1 121545 1
    snd_wavefront 28370 0
    snd_intel8x0 22404 1
    snd_wss_lib 18084 2 snd_cs4236,snd_wavefront
    snd_ac97_codec 90029 2 snd_emu10k1,snd_intel8x0
    snd_opl3_lib 7322 2 snd_cs4236,snd_wavefront
    snd_mpu401_uart 4951 3 snd_mpu401,snd_cs4236,snd_wavefront
    ac97_bus 850 1 snd_ac97_codec
    snd_util_mem 1812 1 snd_emu10k1
    snd_pcm 60311 5 snd_cs4236,snd_emu10k1,snd_intel8x0,snd_wss_lib,snd_ac97_codec
    snd_rawmidi 15295 3 snd_emu10k1,snd_wavefront,snd_mpu401_uart
    snd_seq_device 4388 3 snd_emu10k1,snd_opl3_lib,snd_rawmidi
    snd_timer 15542 4 snd_emu10k1,snd_wss_lib,snd_opl3_lib,snd_pcm
    snd_hwdep 4919 3 snd_emu10k1,snd_wavefront,snd_opl3_lib
    snd 43399 18 snd_mpu401,snd_cs4236,snd_emu10k1,snd_wavefront,snd_intel8x0,snd_wss_lib,snd_ac97_codec,snd_opl3_lib,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_seq_device,snd_timer,snd_hwdep
    soundcore 5018 1 snd
    snd_page_alloc 5909 4 snd_emu10k1,snd_intel8x0,snd_wss_lib,snd_pcm
    Concerning the hardware: The motherboard has an integrated sound chip but it isn't used (or it shouldn't be), the speakers are connected to an Audigy 2ZS PCI card, whose module (snd_emu10k1 as reported by alsaconf) seems to be loaded. Btw, running alsaconf didn't solve the problem, too.
    Thanks in advance for any advice,
    PhotonX
    Solved: Problem disappeared by itself after another update (though no sound related packages were touched this time).
    Last edited by PhotonX (2011-08-13 06:11:22)

    Okay, my sound is working again.  I fixed the problem by changing two settings in the pulse audio volume control.  The first was to turn off the RV710/730 Digital Stereo (HDMI) output device and the second was to change the Internal Audio profile to Analog Surround 5.1 Output.  I don't know if the settings will remain after a reboot or some other change, but they work for now.

  • [SOLVED] Lost Sound After Upgrade

    Solved (for now at least). The problem appears to be a bug with alsa. Alsaconf writes a file called /etc/modprobe.d/50-sound.conf, which contains the aliases for the sound card. But for some reason it then wasn't reading the file. Copying the alias entries to /etc/modprobe.d/modprobe.conf to read directly from there seems to have worked.
    Now to fix the frequency scaling.
    ===================== solved ===========================
    I lost all sound after the last upgrade. I just rebooted because frequency scaling is also not working, and no sound.
    all drivers seem to be there:
    08:50 AM:~ $ lsmod |grep snd
    snd_mpu401_uart 9264 0
    snd_hda_codec_realtek 278132 1
    snd_cs46xx 96800 1
    snd_seq_dummy 3540 0
    gameport 13760 2 snd_cs46xx
    snd_hda_intel 31208 3
    snd_hda_codec 82128 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 9976 1 snd_hda_codec
    snd_rawmidi 26592 2 snd_mpu401_uart,snd_cs46xx
    snd_ac97_codec 133560 1 snd_cs46xx
    snd_seq_oss 36224 0
    snd_seq_midi_event 8592 1 snd_seq_oss
    snd_seq 64640 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 8324 4 snd_seq_dummy,snd_rawmidi,snd_seq_oss,snd_seq
    snd_pcm_oss 47328 0
    snd_pcm 90872 5 snd_cs46xx,snd_hda_intel,snd_hda_codec,snd_ac97_codec,snd_pcm_oss
    snd_timer 25344 2 snd_seq,snd_pcm
    snd_page_alloc 10784 3 snd_cs46xx,snd_hda_intel,snd_pcm
    snd_mixer_oss 20976 2 snd_pcm_oss
    snd 76744 21 snd_mpu401_uart,snd_hda_codec_realtek,snd_cs46xx,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_rawmidi,snd_ac97_codec,snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss
    soundcore 8576 2 snd
    ac97_bus 2160 1 snd_ac97_codec
    I don't see anything in the updated packages that might cause this:
    [2009-08-09 18:09] upgraded gawk (3.1.6-3 -> 3.1.7-1)
    [2009-08-09 18:09] upgraded gimp (2.6.6-2 -> 2.6.6-3)
    [2009-08-09 18:09] upgraded imagemagick (6.5.4.5-1 -> 6.5.4.8-1)
    [2009-08-09 18:09] upgraded kdelibs3 (3.5.10-5 -> 3.5.10-7)
    [2009-08-09 18:09] upgraded mkinitcpio (0.5.25-1 -> 0.5.26-1)
    [2009-08-09 18:09] upgraded polkit-qt (0.9.2-1 -> 0.9.2-2)
    [2009-08-09 18:09] upgraded psmisc (22.7-1 -> 22.8-1)
    [2009-08-09 18:09] upgraded python-pygame (1.9.0-1 -> 1.9.1-1)
    [2009-08-09 18:09] upgraded python-pysqlite (2.4.1-2 -> 2.5.5-1)
    [2009-08-09 18:09] upgraded readline (6.0.003-3 -> 6.0.004-1)
    [2009-08-09 18:09] Fixing gshadow file ...
    [2009-08-09 18:09] upgraded shadow (4.1.4.1-1 -> 4.1.4.2-1)
    I tried firefox, xine, mythfrontend, avidemux2, xmms and mpg123 - there's no sound in any app. If I play something where there are indicators, like in xmms, the eq indicator levels jump, the song progresses like it's playing, but no sound. I reran alsaconf, it seems to be configured properly. The mixer sliders work and aren't muted. It doesn't work either as root or as user.
    I have another computer hooked up through the line out and the sound still works fine there, so it doesn't appear to be a hardware problem.
    I'm completely stumped at this point. If it's a bug somewhere, what's it a bug in to cause global sound loss? Is there anything else I'm overlooking? All I can think is that it must be muted somewhere, but I can't find it. Or else it has something to do with the cpu and cpu freq scaling that's also broken now.
    ===================== solved ===========================
    Last edited by userlander (2009-08-10 15:04:45)

    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.)
    Check your settings. The iPads have a small switch on the right edge. It can be used as a rotation lock to keep the screen from automatically reorienting itself as you move around, but you need to have the tablet’s settings configured properly. That same switch, right above the volume buttons, can also be set to function instead as a mute button to silence certain types of audio.
    If the switch is set to work as a mute button, you can change its purpose to “screen-rotation lock” by tapping the Settings icon on the home screen. On the Settings screen, tap General on the left side, and on the right side of the screen flick down to “Use Side Switch to.” Tap to select Lock Rotation or Mute to set the button’s function. Even if you set the side switch for your preferred use, you can still mute the Mini or lock the screen. Just double-click the Home button, and when the panel of apps appears along the bottom edge of the screen, flick the row from left to right with your finger. Tap the icon on the far left side of the row to either lock the iPad’s screen or mute the iPad’s alerts, notifications and sound effects. Music, podcasts and video are not muted unless you turn the volume all the way down.
    iPhone: Can't hear through the receiver or speakers
    http://support.apple.com/kb/ts1630
    http://www.atreks.com/app-no-sound-on-ipad-4-%E2%80%93-what-to-do/
     Cheers, Tom

Maybe you are looking for

  • Pictures lose quality and audio in a video clip starts to clip after render

    I enjoy doing various random small projects with final cut studio, but there are a few problems I am still having in doing so. One is I record a local basketball league's games and make highlight videos out of them. Another is I like to convert dvds

  • Can we reduce the size of the disk having the Log files for a Dag Database

    There is an issue with disk space filling up for 4 databases part of the same DAG, each having 1 non lagged passive copy. The Disks containing the log files are from the VSphere Storage. The Disk size was temporarily expanded to avoid any outages. Th

  • Duplicate the details section when I retrieve data from Delivery notes

    Hey all. I built a query that retrieve data from ODLN and it works fine. But, when I have a Delivery Notes Document that has items from some different orders (that I copy them to Delivery notes of course) it duplicate my rows in the report I run the

  • Finding the most common value in an array of enums

    Hello, I'm looking for an elegant way of finding the most common value in an array of enums My enum being: 0 - Close 1 - Open 2 - Undefined For instance, if my array contains: Close, Close, Open, Close, Close, Open. The most common value would be "Cl

  • Can no longer play dvd's

    I used to be able to play dvd's on my laptop.  Now I get a Powerdvd screen telling me to upgrade for $60 to be able to play MPEG-2.  Every DVD I have tried has given me the same result.  Just looking for a solution without having to spend anymore $.