[SOLVED] No sound anymore after latest upgrade
Hello,
i did the following upgrade
[2014-01-25 16:06] [PACMAN] starting full system upgrade
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Füge Schlüssel aus archlinux.gpg hinzu ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: 3 marginal-needed, 1 complete-needed, PGP Vertrauensmodell
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 0 gültig: 1 signiert: 5 Vertrauen: 0-, 0q, 0n, 0m, 0f, 1u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 1 gültig: 5 signiert: 59 Vertrauen: 0-, 0q, 0n, 5m, 0f, 0u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 2 gültig: 59 signiert: 4 Vertrauen: 59-, 0q, 0n, 0m, 0f, 0u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: nächste "Trust-DB"-Pflichtüberprüfung am 2016-01-22
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Signiere die vertrauenswürdigen Schlüssel im Schlüsselbund lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 0E8B644079F599DFC1DDC3973348882F6AC6A4C2 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 684148BB25B49E986A4944C55184252D824B18E8 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 44D4A033AC140143927397D47EFD567D4C7EA887 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 27FFC4769E19F096D41D9265A04F9397CDFD6BB0 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel AB19265E5D7D20687D303246BA1DFB64FFF979E7 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Importiere die Vertrauenswerte des Benutzers ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Mache widerrufene Schlüssel im Schlüsselbund unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 7FA647CD89891DEDC060287BB9113D1ED21E1A55 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel BC1FBE4D2826A0B51E47ED62E2539214C6C11350 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 63F395DE2D6398BBE458F281F2DBB4931985A992 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 8F76BEEA0289F9E1D3E229C05F946DED983D4366 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 66BD74A036D522F51DD70A3C7F2A16726521E06D unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 81D7F8241DB38BC759C80FCE3A726C6170E80477 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel E7210A59715F6940CF9A4E36A001876699AD6E84 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Aktualisiere Trust-Datenbank ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: nächste "Trust-DB"-Pflichtüberprüfung am 2016-01-22
[2014-01-25 17:38] [PACMAN] upgraded archlinux-keyring (20140108-1 -> 20140124-1)
[2014-01-25 17:38] [PACMAN] upgraded libdrm (2.4.51-1 -> 2.4.52-1)
[2014-01-25 17:38] [PACMAN] upgraded wayland (1.3.0-1 -> 1.4.0-1)
[2014-01-25 17:38] [PACMAN] upgraded libdbus (1.6.18-3 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded dbus (1.6.18-3 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded libgcrypt (1.5.3-1 -> 1.6.0-2)
[2014-01-25 17:38] [PACMAN] upgraded systemd (208-3 -> 208-10)
[2014-01-25 17:38] [PACMAN] upgraded llvm-libs (3.3-1 -> 3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded mesa (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded mesa-libgl (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded ati-dri (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded bluez (5.13-1 -> 5.14-1)
[2014-01-25 17:38] [PACMAN] upgraded xdg-utils (1.1.0.git20130520-1 -> 1.1.0.git20140109-1)
[2014-01-25 17:38] [PACMAN] upgraded chromium (31.0.1650.63-1 -> 32.0.1700.77-1)
[2014-01-25 17:38] [PACMAN] upgraded gdk-pixbuf2 (2.30.2-1 -> 2.30.3-1)
[2014-01-25 17:38] [PACMAN] upgraded cogl (1.16.0-3 -> 1.16.2-1)
[2014-01-25 17:38] [PACMAN] upgraded clutter (1.16.2-1 -> 1.16.4-1)
[2014-01-25 17:38] [PACMAN] upgraded device-mapper (2.02.104-1 -> 2.02.105-1)
[2014-01-25 17:38] [PACMAN] upgraded cryptsetup (1.6.3-1 -> 1.6.3-2)
[2014-01-25 17:38] [PACMAN] upgraded curl (7.34.0-2 -> 7.34.0-3)
[2014-01-25 17:38] [PACMAN] upgraded cython (0.19.2-1 -> 0.20-1)
[2014-01-25 17:38] [PACMAN] upgraded pth (2.0.7-4 -> 2.0.7-5)
[2014-01-25 17:38] [PACMAN] upgraded dirmngr (1.1.1-1 -> 1.1.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gnutls (3.2.8-1 -> 3.2.9-1)
[2014-01-25 17:38] [PACMAN] upgraded libvorbis (1.3.3-1 -> 1.3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded ffmpeg (1:2.1.1-3 -> 1:2.1.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gcr (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gdbm (1.10-3 -> 1.11-1)
[2014-01-25 17:38] [PACMAN] upgraded gedit (3.10.3-1 -> 3.10.4-1)
[2014-01-25 17:38] [PACMAN] upgraded gettext (0.18.3.1-2 -> 0.18.3.2-1)
[2014-01-25 17:38] [PACMAN] upgraded libcups (1.7.0-2 -> 1.7.1-3)
[2014-01-25 17:38] [PACMAN] installed libpaper (1.1.24-7)
[2014-01-25 17:38] [PACMAN] upgraded ghostscript (9.10-1 -> 9.10-3)
[2014-01-25 17:38] [PACMAN] upgraded glamor-egl (0.5.1-1 -> 0.5.1.r258-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-chess (3.10.2-2 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-desktop (1:3.10.1-2 -> 1:3.10.2-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-keyring (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gnome-online-miners (3.10.2-1 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded libsecret (0.16-1 -> 0.16-2)
[2014-01-25 17:38] [PACMAN] upgraded mutter (3.10.2-2 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-shell (3.10.2.1-4 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnupg (2.0.22-1 -> 2.0.22-2)
[2014-01-25 17:38] [PACMAN] upgraded grilo-plugins (0.2.9-2 -> 0.2.9-3)
[2014-01-25 17:38] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-8 -> 0.10.19-9)
[2014-01-25 17:38] [PACMAN] upgraded libcdio (0.90-2 -> 0.92-1)
[2014-01-25 17:38] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-8 -> 0.10.19-9)
[2014-01-25 17:38] [PACMAN] upgraded gtk-vnc (0.5.3-1 -> 0.5.3-3)
[2014-01-25 17:38] [PACMAN] upgraded libcdio-paranoia (10.2+0.90+1-1 -> 10.2+0.90+1-2)
[2014-01-25 17:38] [PACMAN] upgraded gvfs (1.18.3-1 -> 1.18.3-3)
[2014-01-25 17:38] [PACMAN] upgraded python-dbus-common (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded python2-dbus (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded libibus (1.5.4-3 -> 1.5.5-1)
[2014-01-25 17:38] [PACMAN] upgraded ibus (1.5.4-3 -> 1.5.5-1)
[2014-01-25 17:38] [PACMAN] upgraded inetutils (1.9.1.341-2 -> 1.9.2-1)
[2014-01-25 17:38] [PACMAN] upgraded iptables (1.4.20-1 -> 1.4.21-1)
[2014-01-25 17:38] [PACMAN] upgraded iproute2 (3.11.0-1 -> 3.12.0-1)
[2014-01-25 17:38] [PACMAN] upgraded isl (0.12.1-2 -> 0.12.2-1)
[2014-01-25 17:38] [PACMAN] upgraded jack (0.121.3-7 -> 0.124.1-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-dbus (1.6.18-1 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-gettext (0.18.3.1-1 -> 0.18.3.2-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libcap (2.22-2 -> 2.24-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libdrm (2.4.51-1 -> 2.4.52-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libgcrypt (1.5.3-1 -> 1.6.0-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-llvm-libs (3.3-1 -> 3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-systemd (208-1 -> 208-2)
[2014-01-25 17:38] [PACMAN] upgraded lib32-mesa (10.0.1-1 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-mesa-libgl (10.0.1-1 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded libxslt (1.1.28-2 -> 1.1.28-3)
[2014-01-25 17:38] [PACMAN] upgraded libgda (5.2.1-1 -> 5.2.1-2)
[2014-01-25 17:38] [PACMAN] upgraded libgnome-keyring (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded libraw (0.15.4-3 -> 0.16.0-1)
[2014-01-25 17:38] [PACMAN] upgraded rasqal (1:0.9.30-3 -> 1:0.9.30-4)
[2014-01-25 17:38] [PACMAN] upgraded redland (1:1.0.16-2 -> 1:1.0.17-1)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-common (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-base (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-calc (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-draw (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-gnome (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-impress (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-math (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-writer (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libwbclient (4.1.3-1 -> 4.1.4-1)
[2014-01-25 17:38] [PACMAN] upgraded linux-firmware (20131013.7d0c7a8-1 -> 20140123.418320b-1)
[2014-01-25 17:38] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-01-25 17:38] [PACMAN] upgraded linux (3.12.7-1 -> 3.12.8-1)
[2014-01-25 17:38] [PACMAN] upgraded lvm2 (2.02.104-1 -> 2.02.105-1)
[2014-01-25 17:38] [PACMAN] upgraded man-pages (3.55-1 -> 3.56-1)
[2014-01-25 17:38] [PACMAN] upgraded pcre (8.34-1 -> 8.34-2)
[2014-01-25 17:38] [PACMAN] upgraded perl (5.18.1-1 -> 5.18.2-2)
[2014-01-25 17:38] [PACMAN] upgraded procps-ng (3.3.9-1 -> 3.3.9-2)
[2014-01-25 17:38] [PACMAN] upgraded python-dbus (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded s-nail (14.5.1-1 -> 14.5.2-1)
[2014-01-25 17:39] [PACMAN] upgraded webkitgtk (2.2.3-1 -> 2.2.4-1)
[2014-01-25 17:39] [PACMAN] upgraded shotwell (0.15.1-1 -> 0.15.1-2)
[2014-01-25 17:39] [PACMAN] upgraded smbclient (4.1.3-1 -> 4.1.4-1)
[2014-01-25 17:39] [PACMAN] upgraded sudo (1.8.8-1 -> 1.8.9.p4-1)
[2014-01-25 17:39] [PACMAN] upgraded systemd-sysvcompat (208-3 -> 208-10)
[2014-01-25 17:39] [PACMAN] upgraded totem-plparser (3.10.0-3 -> 3.10.0-4)
[2014-01-25 17:39] [PACMAN] upgraded vino (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:39] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2014-01-25 17:39] [PACMAN] upgraded virtualbox-host-modules (4.3.6-3 -> 4.3.6-4)
[2014-01-25 17:39] [PACMAN] upgraded virtualbox (4.3.6-2 -> 4.3.6-3)
[2014-01-25 17:39] [PACMAN] upgraded vlc (2.1.2-2 -> 2.1.2-3)
[2014-01-25 17:39] [PACMAN] upgraded wine (1.7.10-1 -> 1.7.11-1)
[2014-01-25 17:39] [PACMAN] upgraded xextproto (7.2.1-1 -> 7.3.0-1)
[2014-01-25 17:39] [PACMAN] upgraded xf86-input-evdev (2.8.2-1 -> 2.8.2-2)
[2014-01-25 17:39] [PACMAN] upgraded xf86-video-ati (1:7.2.0-1 -> 1:7.2.0-2)
[2014-01-25 17:39] [PACMAN] upgraded xorg-server-common (1.14.5-2 -> 1.15.0-5)
[2014-01-25 17:39] [PACMAN] installed libxshmfence (1.1-1)
[2014-01-25 17:39] [PACMAN] upgraded xorg-server (1.14.5-2 -> 1.15.0-5)
[2014-01-25 17:39] [PACMAN] upgraded yelp (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:39] [PACMAN] upgraded youtube-dl (2014.01.17.2-1 -> 2014.01.23.4-1)
And dont have any sound anymore, nowhere. PulseAudio is just ignoring my sound-card completely and KDE/GNOME System settings tell me that i do not even have any soundcard
Alsamixer detects the soundcard fine and if i unmute the soundcard there, it works. But its not really comfortable to change the volume with Alsamixer. Also i have no ability to change between HDMI and Analog.
Any idea what could have cause this? As you can see in the logs, there havent been any major kernel update nor pulseaudio update.
This is the Soundcard: Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Kernel Module is snd_hda_intel which is loaded and working
Seems like Pulseaudio is not running at all, it also does not start with the message "E: [pulseaudio] core-util.c: Home directory not accessible: Permission denied" which is not true
Last edited by Vamp898 (2014-01-26 15:29:22)
Ok, found out it was true.
Seems like whatever reason i have to find out reset some files (not all) to root, so i was no longer the owner of some random files for whatever reason.
Works now.
Similar Messages
-
[SOLVED] "Loading Modules" Slow after Latest Upgrade (EeePC 901)
After the latest upgrade, my EeePC is taking an incredibly long time (20+ seconds) at the "Loading Modules" stage of the boot process. I cannot find any error messages, and after the pause, the machine boots normally. This process used to be almost instantantaneous before the upgrade. The modules being loaded are rfkill and eeepc_laptop.
Can anyone help?
Thanks in advance
Last edited by myrlin (2011-06-27 10:28:21)Hi Jason, thank you for helping me.
Here is my rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged.
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
# VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
LOCALE="en_GB.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="Europe/London"
KEYMAP="uk"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
# HARDWARE
# MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
# Replace every !module by an entry as on the following line in a file in
# /etc/modprobe.d:
# blacklist module
# See "man modprobe.conf" for details.
MOD_AUTOLOAD="yes"
MODULES=(rfkill eeepc_laptop)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="eeepc"
# Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
# Wired network setup
# - interface: name of device (required)
# - address: IP address (leave blank for DHCP)
# - netmask: subnet mask (ignored for DHCP)
# - gateway: default route (ignored for DHCP)
# Static IP example
# interface=eth0
# address=192.168.0.2
# netmask=255.255.255.0
# gateway=192.168.0.1
# DHCP example
# interface=eth0
# address=
# netmask=
# gateway=
interface=eth0
address=
netmask=
gateway=
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these netcfg profiles at boot-up. These are useful if you happen to
# need more advanced network features than the simple network service
# supports, such as multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(syslog-ng dbus hal networkmanager privoxy netfs rfkill eeepc_laptop @ufw @crond @alsa !bluetooth @samba @cups)
Here is my blacklist.conf (I have restored the framebuffer one):
blacklist rt2800pci
blacklist rt61pci
blacklist rt2x00pci
blacklist rt2800usb
blacklist rt2800lib
blacklist rt2x00usb
blacklist rt2x00lib
And here is the output of lsmod:
Module Size Used by
fuse 58669 3
ipt_REJECT 2029 1
ipt_LOG 6518 5
xt_multiport 1498 2
xt_limit 1423 7
xt_tcpudp 1883 7
xt_addrtype 2393 4
nf_conntrack_ipv4 9601 7
nf_defrag_ipv4 1023 1 nf_conntrack_ipv4
xt_state 971 7
ip6table_filter 1072 1
ip6_tables 10461 1 ip6table_filter
ipv6 249260 12
nf_conntrack_netbios_ns 801 0
nf_conntrack_broadcast 961 1 nf_conntrack_netbios_ns
nf_conntrack_pptp 3857 0
nf_conntrack_proto_gre 3241 1 nf_conntrack_pptp
nf_conntrack 50208 6 nf_conntrack_ipv4,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_pptp,nf_conntrack_proto_gre
iptable_filter 1100 1
ip_tables 9186 1 iptable_filter
x_tables 11774 11 ipt_REJECT,ipt_LOG,xt_multiport,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables
btusb 9897 0
bluetooth 115465 1 btusb
uvcvideo 55020 0
videodev 70734 1 uvcvideo
media 8545 1 videodev
joydev 7535 0
snd_hda_codec_realtek 225687 1
i915 557262 2
snd_hda_intel 19261 1
snd_hda_codec 66793 2 snd_hda_codec_realtek,snd_hda_intel
snd_hwdep 4919 1 snd_hda_codec
drm_kms_helper 24245 1 i915
snd_pcm 60311 2 snd_hda_intel,snd_hda_codec
drm 147653 3 i915,drm_kms_helper
uhci_hcd 19344 0
snd_timer 15542 1 snd_pcm
ehci_hcd 34847 0
rt2860sta 479236 1
intel_agp 8664 1 i915
psmouse 55927 0
snd 43527 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
usbcore 119004 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
i2c_algo_bit 4431 1 i915
iTCO_wdt 10333 0
i2c_i801 7039 0
serio_raw 3430 0
pcspkr 1415 0
sg 21022 0
i2c_core 16665 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
evdev 7310 15
intel_gtt 11417 3 i915,intel_agp
crc_ccitt 1103 1 rt2860sta
iTCO_vendor_support 1553 1 iTCO_wdt
soundcore 5018 1 snd
battery 8905 0
processor 21884 0
eeepc_laptop 12452 0
atl1e 24804 0
button 3654 1 i915
sparse_keymap 2636 1 eeepc_laptop
thermal 6603 0
ac 2545 0
video 9852 1 i915
snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
pci_hotplug 21978 1 eeepc_laptop
agpgart 22160 3 drm,intel_agp,intel_gtt
rfkill 12510 2 bluetooth,eeepc_laptop
ext4 334626 3
mbcache 4321 1 ext4
jbd2 59098 1 ext4
crc16 1077 2 bluetooth,ext4
sd_mod 25515 5
ata_piix 18569 3
pata_acpi 2396 0
libata 154349 2 ata_piix,pata_acpi
scsi_mod 110670 3 sg,sd_mod,libata
I hope this all means more to you than it does to me!!!! -
[Solved] Vlc seg faults after latest upgrade
When updating vlc I now get this message from pacman
/tmp/alpm_LHUeqA/.INSTALL: line 1: 1809 Segmentation fault (core dumped) usr/lib/vlc/vlc-cache-gen -f /usr/lib/vlc/plugins
Running vlc outputs
VLC media player 2.0.6 Twoflower (revision 2.0.6-0-gbe9623c)
Segmentation fault (core dumped)
running dmesg gives
segfault at 7fcfb5413e8b ip 00007fcfba60c206 sp 00007ffff597e588 error 4 in libc-2.17.so[7fcfba58c000+1a3000]
I've tried manually running vlc-cache-gen as well, but I get the same output as above. Downgrading vlc also resulted in the same error. I am using the nvidia closed source driver if that makes a difference. Any one have any ideas on whats going on here?
Last edited by piratebill (2013-05-15 18:52:50)piratebill wrote:
pilotkeller wrote:
I hate to be 'that guy' but trying out mplayer2 is another option.
I moved away form VLC over a year ago and haven't looked back.
It's your call but I have VLC on Windows and the new versions seem to brick itself.
Could be that it's old configs are breaking the new version.
I'm not married to VLC, so noted.
On the trying to repair it front, I found a german guy with the same issue:
https://bbs.archlinux.de/viewtopic.php?pid=304355
While google translate does try, I cant really tell what he did to fix it. Thoughts?
What he did was restore a system backup from a few days ago, then first a `pacman -Sy` to update the package list and after that a single `pacman -S vlc` so that only vlc gets updated, and then finally the system upgrade `pacman -Su`. Seems like that worked for him.
Unfortunately I'm having the same problem and don't have the option to restore a recent system backup. -
Wine doesn't start utorrent anymore after latest update [SOLVED]
Like the subject says, wine doesn't start utorrent anymore after latest update. The output I get is the following:
$ wine /mnt/data/utorrent/utorrent-1.6.1-beta-build-478.exe
fixme:vxd:VXD_Open Unknown/unsupported VxD L"sice.vxd". Try setting Windows version to 'nt40' or 'win31'.
fixme:vxd:VXD_Open Unknown/unsupported VxD L"ntice.vxd". Try setting Windows version to 'nt40' or 'win31'.
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
fixme:listview:LISTVIEW_SetColumnOrderArray iCount 16 lpiArray 0x33e7b8
fixme:keyboard:UnregisterHotKey (0x30024,1): stub
and then it hangs. If I change my Windows version in winecfg to for instance Windows XP, the first 2 errors disappear, but wine still hangs:
$ wine /mnt/data/utorrent/utorrent-1.6.1-beta-build-478.exe
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
err:imagelist:ImageList_LoadImageW Error loading image!
fixme:listview:LISTVIEW_SetColumnOrderArray iCount 16 lpiArray 0x33edf8
fixme:keyboard:UnregisterHotKey (0x30026,1): stub
The vm.legacy_va_layout sysctl is not enabled:
# sysctl vm.legacy_va_layout
vm.legacy_va_layout = 0
Does anybody have an idea to what might be going on?
Enabling DRI and disabling DRI doesn't help. Updating to the latest wine 0.9.30-1 also didn't change anything.
Last edited by tunkaflux (2007-01-31 12:45:44)Problem is solved. Had to delete the .wine folder. Lost all utorrent settings, but it works again now.
-
Gtk messed up after latest upgrade
After latest upgrades it seems that anything gtk-related (2 or 3) is drawn as garbage, see image on http://i.imgur.com/g57D0KS.jpg
Tiled-qt on the left looks fine, however, as does chromium.
Xorg.log here:
[ 13.396]
X.Org X Server 1.14.2
Release Date: 2013-06-25
[ 13.396] X Protocol Version 11, Revision 0
[ 13.396] Build Operating System: Linux 3.9.7-1-ARCH x86_64
[ 13.396] Current Operating System: Linux laite-arch 3.10.2-1-ARCH #1 SMP PREEMPT Mon Jul 22 08:47:24 CEST 2013 x86_64
[ 13.396] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ea8eee16-3368-4aea-baf2-63f8483fc7b2 ro quiet
[ 13.396] Build Date: 01 July 2013 10:48:42AM
[ 13.396]
[ 13.396] Current version of pixman: 0.30.0
[ 13.396] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.396] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.396] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jul 26 17:41:33 2013
[ 13.538] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.538] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 13.812] (==) No Layout section. Using the first Screen section.
[ 13.812] (==) No screen section available. Using defaults.
[ 13.812] (**) |-->Screen "Default Screen Section" (0)
[ 13.813] (**) | |-->Monitor "<default monitor>"
[ 13.813] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 13.813] (==) Automatically adding devices
[ 13.813] (==) Automatically enabling devices
[ 13.813] (==) Automatically adding GPU devices
[ 14.042] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 14.261] Entry deleted from font path.
[ 14.495] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 14.495] Entry deleted from font path.
[ 14.495] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 14.495] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 14.495] Entry deleted from font path.
[ 14.495] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 14.495] (**) FontPath set to:
/usr/share/fonts/local,
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/
[ 14.495] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 14.495] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.509] (II) Loader magic: 0x7fdc20
[ 14.509] (II) Module ABI versions:
[ 14.509] X.Org ANSI C Emulation: 0.4
[ 14.509] X.Org Video Driver: 14.1
[ 14.509] X.Org XInput driver : 19.1
[ 14.509] X.Org Server Extension : 7.0
[ 14.510] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 14.513] (--) PCI:*(0:2:0:0) 1002:94b3:174b:1170 rev 0, Mem @ 0xd0000000/268435456, 0xfbfe0000/65536, I/O @ 0x0000e800/256, BIOS @ 0x????????/131072
[ 14.513] Initializing built-in extension Generic Event Extension
[ 14.513] Initializing built-in extension SHAPE
[ 14.513] Initializing built-in extension MIT-SHM
[ 14.513] Initializing built-in extension XInputExtension
[ 14.513] Initializing built-in extension XTEST
[ 14.513] Initializing built-in extension BIG-REQUESTS
[ 14.513] Initializing built-in extension SYNC
[ 14.513] Initializing built-in extension XKEYBOARD
[ 14.513] Initializing built-in extension XC-MISC
[ 14.513] Initializing built-in extension SECURITY
[ 14.513] Initializing built-in extension XINERAMA
[ 14.513] Initializing built-in extension XFIXES
[ 14.513] Initializing built-in extension RENDER
[ 14.513] Initializing built-in extension RANDR
[ 14.513] Initializing built-in extension COMPOSITE
[ 14.513] Initializing built-in extension DAMAGE
[ 14.513] Initializing built-in extension MIT-SCREEN-SAVER
[ 14.513] Initializing built-in extension DOUBLE-BUFFER
[ 14.513] Initializing built-in extension RECORD
[ 14.513] Initializing built-in extension DPMS
[ 14.514] Initializing built-in extension X-Resource
[ 14.514] Initializing built-in extension XVideo
[ 14.514] Initializing built-in extension XVideo-MotionCompensation
[ 14.514] Initializing built-in extension XFree86-VidModeExtension
[ 14.514] Initializing built-in extension XFree86-DGA
[ 14.514] Initializing built-in extension XFree86-DRI
[ 14.514] Initializing built-in extension DRI2
[ 14.514] (II) "glx" will be loaded by default.
[ 14.514] (II) LoadModule: "dri2"
[ 14.514] (II) Module "dri2" already built-in
[ 14.514] (II) LoadModule: "glamoregl"
[ 14.724] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 16.917] (II) Module glamoregl: vendor="X.Org Foundation"
[ 16.917] compiled for 1.14.0, module version = 0.5.0
[ 16.917] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.917] (II) LoadModule: "glx"
[ 16.917] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 17.116] (II) Module glx: vendor="X.Org Foundation"
[ 17.116] compiled for 1.14.2, module version = 1.0.0
[ 17.116] ABI class: X.Org Server Extension, version 7.0
[ 17.116] (==) AIGLX enabled
[ 17.117] Loading extension GLX
[ 17.117] (==) Matched ati as autoconfigured driver 0
[ 17.117] (==) Matched ati as autoconfigured driver 1
[ 17.117] (==) Matched vesa as autoconfigured driver 2
[ 17.117] (==) Matched modesetting as autoconfigured driver 3
[ 17.117] (==) Matched fbdev as autoconfigured driver 4
[ 17.117] (==) Assigned the driver to the xf86ConfigLayout
[ 17.117] (II) LoadModule: "ati"
[ 17.117] (II) Loading /usr/lib/xorg/modules/drivers/ati_drv.so
[ 17.162] (II) Module ati: vendor="X.Org Foundation"
[ 17.162] compiled for 1.14.0, module version = 7.1.0
[ 17.162] Module class: X.Org Video Driver
[ 17.162] ABI class: X.Org Video Driver, version 14.1
[ 17.162] (II) LoadModule: "radeon"
[ 17.162] (II) Loading /usr/lib/xorg/modules/drivers/radeon_drv.so
[ 17.266] (II) Module radeon: vendor="X.Org Foundation"
[ 17.266] compiled for 1.14.0, module version = 7.1.0
[ 17.266] Module class: X.Org Video Driver
[ 17.266] ABI class: X.Org Video Driver, version 14.1
[ 17.266] (II) LoadModule: "vesa"
[ 17.281] (WW) Warning, couldn't open module vesa
[ 17.281] (II) UnloadModule: "vesa"
[ 17.281] (II) Unloading vesa
[ 17.281] (EE) Failed to load module "vesa" (module does not exist, 0)
[ 17.281] (II) LoadModule: "modesetting"
[ 17.281] (WW) Warning, couldn't open module modesetting
[ 17.281] (II) UnloadModule: "modesetting"
[ 17.281] (II) Unloading modesetting
[ 17.281] (EE) Failed to load module "modesetting" (module does not exist, 0)
[ 17.281] (II) LoadModule: "fbdev"
[ 17.282] (WW) Warning, couldn't open module fbdev
[ 17.282] (II) UnloadModule: "fbdev"
[ 17.282] (II) Unloading fbdev
[ 17.282] (EE) Failed to load module "fbdev" (module does not exist, 0)
[ 17.282] (II) RADEON: Driver for ATI Radeon chipsets:
ATI Radeon Mobility X600 (M24) 3150 (PCIE), ATI FireMV 2400 (PCI),
ATI Radeon Mobility X300 (M24) 3152 (PCIE),
ATI FireGL M24 GL 3154 (PCIE), ATI FireMV 2400 3155 (PCI),
ATI Radeon X600 (RV380) 3E50 (PCIE),
ATI FireGL V3200 (RV380) 3E54 (PCIE), ATI Radeon IGP320 (A3) 4136,
ATI Radeon IGP330/340/350 (A4) 4137, ATI Radeon 9500 AD (AGP),
ATI Radeon 9500 AE (AGP), ATI Radeon 9600TX AF (AGP),
ATI FireGL Z1 AG (AGP), ATI Radeon 9800SE AH (AGP),
ATI Radeon 9800 AI (AGP), ATI Radeon 9800 AJ (AGP),
ATI FireGL X2 AK (AGP), ATI Radeon 9600 AP (AGP),
ATI Radeon 9600SE AQ (AGP), ATI Radeon 9600XT AR (AGP),
ATI Radeon 9600 AS (AGP), ATI FireGL T2 AT (AGP), ATI Radeon 9650,
ATI FireGL RV360 AV (AGP), ATI Radeon 7000 IGP (A4+) 4237,
ATI Radeon 8500 AIW BB (AGP), ATI Radeon IGP320M (U1) 4336,
ATI Radeon IGP330M/340M/350M (U2) 4337,
ATI Radeon Mobility 7000 IGP 4437, ATI Radeon 9000/PRO If (AGP/PCI),
ATI Radeon 9000 Ig (AGP/PCI), ATI Radeon X800 (R420) JH (AGP),
ATI Radeon X800PRO (R420) JI (AGP),
ATI Radeon X800SE (R420) JJ (AGP), ATI Radeon X800 (R420) JK (AGP),
ATI Radeon X800 (R420) JL (AGP), ATI FireGL X3 (R420) JM (AGP),
ATI Radeon Mobility 9800 (M18) JN (AGP),
ATI Radeon X800 SE (R420) (AGP), ATI Radeon X800XT (R420) JP (AGP),
ATI Radeon X800 VE (R420) JT (AGP), ATI Radeon X850 (R480) (AGP),
ATI Radeon X850 XT (R480) (AGP), ATI Radeon X850 SE (R480) (AGP),
ATI Radeon X850 PRO (R480) (AGP), ATI Radeon X850 XT PE (R480) (AGP),
ATI Radeon Mobility M7 LW (AGP),
ATI Mobility FireGL 7800 M7 LX (AGP),
ATI Radeon Mobility M6 LY (AGP), ATI Radeon Mobility M6 LZ (AGP),
ATI FireGL Mobility 9000 (M9) Ld (AGP),
ATI Radeon Mobility 9000 (M9) Lf (AGP),
ATI Radeon Mobility 9000 (M9) Lg (AGP), ATI FireMV 2400 PCI,
ATI Radeon 9700 Pro ND (AGP), ATI Radeon 9700/9500Pro NE (AGP),
ATI Radeon 9600TX NF (AGP), ATI FireGL X1 NG (AGP),
ATI Radeon 9800PRO NH (AGP), ATI Radeon 9800 NI (AGP),
ATI FireGL X2 NK (AGP), ATI Radeon 9800XT NJ (AGP),
ATI Radeon Mobility 9600/9700 (M10/M11) NP (AGP),
ATI Radeon Mobility 9600 (M10) NQ (AGP),
ATI Radeon Mobility 9600 (M11) NR (AGP),
ATI Radeon Mobility 9600 (M10) NS (AGP),
ATI FireGL Mobility T2 (M10) NT (AGP),
ATI FireGL Mobility T2e (M11) NV (AGP), ATI Radeon QD (AGP),
ATI Radeon QE (AGP), ATI Radeon QF (AGP), ATI Radeon QG (AGP),
ATI FireGL 8700/8800 QH (AGP), ATI Radeon 8500 QL (AGP),
ATI Radeon 9100 QM (AGP), ATI Radeon 7500 QW (AGP/PCI),
ATI Radeon 7500 QX (AGP/PCI), ATI Radeon VE/7000 QY (AGP/PCI),
ATI Radeon VE/7000 QZ (AGP/PCI), ATI ES1000 515E (PCI),
ATI Radeon Mobility X300 (M22) 5460 (PCIE),
ATI Radeon Mobility X600 SE (M24C) 5462 (PCIE),
ATI FireGL M22 GL 5464 (PCIE), ATI Radeon X800 (R423) UH (PCIE),
ATI Radeon X800PRO (R423) UI (PCIE),
ATI Radeon X800LE (R423) UJ (PCIE),
ATI Radeon X800SE (R423) UK (PCIE),
ATI Radeon X800 XTP (R430) (PCIE), ATI Radeon X800 XL (R430) (PCIE),
ATI Radeon X800 SE (R430) (PCIE), ATI Radeon X800 (R430) (PCIE),
ATI FireGL V7100 (R423) (PCIE), ATI FireGL V5100 (R423) UQ (PCIE),
ATI FireGL unknown (R423) UR (PCIE),
ATI FireGL unknown (R423) UT (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility FireGL V5000 (M26) (PCIE),
ATI Mobility Radeon X700 XL (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Mobility Radeon X700 (M26) (PCIE),
ATI Radeon X550XTX 5657 (PCIE), ATI Radeon 9100 IGP (A5) 5834,
ATI Radeon Mobility 9100 IGP (U3) 5835,
ATI Radeon XPRESS 200 5954 (PCIE),
ATI Radeon XPRESS 200M 5955 (PCIE), ATI Radeon 9250 5960 (AGP),
ATI Radeon 9200 5961 (AGP), ATI Radeon 9200 5962 (AGP),
ATI Radeon 9200SE 5964 (AGP), ATI FireMV 2200 (PCI),
ATI ES1000 5969 (PCI), ATI Radeon XPRESS 200 5974 (PCIE),
ATI Radeon XPRESS 200M 5975 (PCIE),
ATI Radeon XPRESS 200 5A41 (PCIE),
ATI Radeon XPRESS 200M 5A42 (PCIE),
ATI Radeon XPRESS 200 5A61 (PCIE),
ATI Radeon XPRESS 200M 5A62 (PCIE),
ATI Radeon X300 (RV370) 5B60 (PCIE),
ATI Radeon X600 (RV370) 5B62 (PCIE),
ATI Radeon X550 (RV370) 5B63 (PCIE),
ATI FireGL V3100 (RV370) 5B64 (PCIE),
ATI FireMV 2200 PCIE (RV370) 5B65 (PCIE),
ATI Radeon Mobility 9200 (M9+) 5C61 (AGP),
ATI Radeon Mobility 9200 (M9+) 5C63 (AGP),
ATI Mobility Radeon X800 XT (M28) (PCIE),
ATI Mobility FireGL V5100 (M28) (PCIE),
ATI Mobility Radeon X800 (M28) (PCIE), ATI Radeon X850 5D4C (PCIE),
ATI Radeon X850 XT PE (R480) (PCIE),
ATI Radeon X850 SE (R480) (PCIE), ATI Radeon X850 PRO (R480) (PCIE),
ATI unknown Radeon / FireGL (R480) 5D50 (PCIE),
ATI Radeon X850 XT (R480) (PCIE),
ATI Radeon X800XT (R423) 5D57 (PCIE),
ATI FireGL V5000 (RV410) (PCIE), ATI Radeon X700 XT (RV410) (PCIE),
ATI Radeon X700 PRO (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X700 (RV410) (PCIE),
ATI Radeon X700 SE (RV410) (PCIE), ATI Radeon X1800,
ATI Mobility Radeon X1800 XT, ATI Mobility Radeon X1800,
ATI Mobility FireGL V7200, ATI FireGL V7200, ATI FireGL V5300,
ATI Mobility FireGL V7100, ATI Radeon X1800, ATI Radeon X1800,
ATI Radeon X1800, ATI Radeon X1800, ATI Radeon X1800,
ATI FireGL V7300, ATI FireGL V7350, ATI Radeon X1600, ATI RV505,
ATI Radeon X1300/X1550, ATI Radeon X1550, ATI M54-GL,
ATI Mobility Radeon X1400, ATI Radeon X1300/X1550,
ATI Radeon X1550 64-bit, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Mobility Radeon X1300,
ATI Mobility Radeon X1300, ATI Radeon X1300, ATI Radeon X1300,
ATI RV505, ATI RV505, ATI FireGL V3300, ATI FireGL V3350,
ATI Radeon X1300, ATI Radeon X1550 64-bit, ATI Radeon X1300/X1550,
ATI Radeon X1600, ATI Radeon X1300/X1550, ATI Mobility Radeon X1450,
ATI Radeon X1300/X1550, ATI Mobility Radeon X2300,
ATI Mobility Radeon X2300, ATI Mobility Radeon X1350,
ATI Mobility Radeon X1350, ATI Mobility Radeon X1450,
ATI Radeon X1300, ATI Radeon X1550, ATI Mobility Radeon X1350,
ATI FireMV 2250, ATI Radeon X1550 64-bit, ATI Radeon X1600,
ATI Radeon X1650, ATI Radeon X1600, ATI Radeon X1600,
ATI Mobility FireGL V5200, ATI Mobility Radeon X1600,
ATI Radeon X1650, ATI Radeon X1650, ATI Radeon X1600,
ATI Radeon X1300 XT/X1600 Pro, ATI FireGL V3400,
ATI Mobility FireGL V5250, ATI Mobility Radeon X1700,
ATI Mobility Radeon X1700 XT, ATI FireGL V5200,
ATI Mobility Radeon X1700, ATI Radeon X2300HD,
ATI Mobility Radeon HD 2300, ATI Mobility Radeon HD 2300,
ATI Radeon X1950, ATI Radeon X1900, ATI Radeon X1950,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI Radeon X1900, ATI Radeon X1900, ATI Radeon X1900,
ATI AMD Stream Processor, ATI Radeon X1900, ATI Radeon X1950,
ATI RV560, ATI RV560, ATI Mobility Radeon X1900, ATI RV560,
ATI Radeon X1950 GT, ATI RV570, ATI RV570, ATI FireGL V7400,
ATI RV560, ATI Radeon X1650, ATI Radeon X1650, ATI RV560,
ATI Radeon 9100 PRO IGP 7834, ATI Radeon Mobility 9200 IGP 7835,
ATI Radeon X1200, ATI Radeon X1200, ATI Radeon X1200,
ATI Radeon X1200, ATI Radeon X1200, ATI RS740, ATI RS740M, ATI RS740,
ATI RS740M, ATI Radeon HD 2900 XT, ATI Radeon HD 2900 XT,
ATI Radeon HD 2900 XT, ATI Radeon HD 2900 Pro, ATI Radeon HD 2900 GT,
ATI FireGL V8650, ATI FireGL V8600, ATI FireGL V7600,
ATI Radeon 4800 Series, ATI Radeon HD 4870 x2,
ATI Radeon 4800 Series, ATI Radeon HD 4850 x2,
ATI FirePro V8750 (FireGL), ATI FirePro V7760 (FireGL),
ATI Mobility RADEON HD 4850, ATI Mobility RADEON HD 4850 X2,
ATI Radeon 4800 Series, ATI FirePro RV770, AMD FireStream 9270,
AMD FireStream 9250, ATI FirePro V8700 (FireGL),
ATI Mobility RADEON HD 4870, ATI Mobility RADEON M98,
ATI Mobility RADEON HD 4870, ATI Radeon 4800 Series,
ATI Radeon 4800 Series, ATI FirePro M7750, ATI M98, ATI M98, ATI M98,
ATI Mobility Radeon HD 4650, ATI Radeon RV730 (AGP),
ATI Mobility Radeon HD 4670, ATI FirePro M5750,
ATI Mobility Radeon HD 4670, ATI Radeon RV730 (AGP),
ATI RV730XT [Radeon HD 4670], ATI RADEON E4600,
ATI Radeon HD 4600 Series, ATI RV730 PRO [Radeon HD 4650],
ATI FirePro V7750 (FireGL), ATI FirePro V5700 (FireGL),
ATI FirePro V3750 (FireGL), ATI Mobility Radeon HD 4830,
ATI Mobility Radeon HD 4850, ATI FirePro M7740, ATI RV740,
ATI Radeon HD 4770, ATI Radeon HD 4700 Series, ATI Radeon HD 4770,
ATI FirePro M5750, ATI RV610, ATI Radeon HD 2400 XT,
ATI Radeon HD 2400 Pro, ATI Radeon HD 2400 PRO AGP, ATI FireGL V4000,
ATI RV610, ATI Radeon HD 2350, ATI Mobility Radeon HD 2400 XT,
ATI Mobility Radeon HD 2400, ATI RADEON E2400, ATI RV610,
ATI FireMV 2260, ATI RV670, ATI Radeon HD3870,
ATI Mobility Radeon HD 3850, ATI Radeon HD3850,
ATI Mobility Radeon HD 3850 X2, ATI RV670,
ATI Mobility Radeon HD 3870, ATI Mobility Radeon HD 3870 X2,
ATI Radeon HD3870 X2, ATI FireGL V7700, ATI Radeon HD3850,
ATI Radeon HD3690, AMD Firestream 9170, ATI Radeon HD 4550,
ATI Radeon RV710, ATI Radeon RV710, ATI Radeon RV710,
ATI Radeon HD 4350, ATI Mobility Radeon 4300 Series,
ATI Mobility Radeon 4500 Series, ATI Mobility Radeon 4500 Series,
ATI FirePro RG220, ATI Mobility Radeon 4330, ATI RV630,
ATI Mobility Radeon HD 2600, ATI Mobility Radeon HD 2600 XT,
ATI Radeon HD 2600 XT AGP, ATI Radeon HD 2600 Pro AGP,
ATI Radeon HD 2600 XT, ATI Radeon HD 2600 Pro, ATI Gemini RV630,
ATI Gemini Mobility Radeon HD 2600 XT, ATI FireGL V5600,
ATI FireGL V3600, ATI Radeon HD 2600 LE,
ATI Mobility FireGL Graphics Processor, ATI Radeon HD 3470,
ATI Mobility Radeon HD 3430, ATI Mobility Radeon HD 3400 Series,
ATI Radeon HD 3450, ATI Radeon HD 3450, ATI Radeon HD 3430,
ATI Radeon HD 3450, ATI FirePro V3700, ATI FireMV 2450,
ATI FireMV 2260, ATI FireMV 2260, ATI Radeon HD 3600 Series,
ATI Radeon HD 3650 AGP, ATI Radeon HD 3600 PRO,
ATI Radeon HD 3600 XT, ATI Radeon HD 3600 PRO,
ATI Mobility Radeon HD 3650, ATI Mobility Radeon HD 3670,
ATI Mobility FireGL V5700, ATI Mobility FireGL V5725,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3200 Graphics, ATI Radeon 3100 Graphics,
ATI Radeon HD 3300 Graphics, ATI Radeon HD 3200 Graphics,
ATI Radeon 3000 Graphics, SUMO, SUMO, SUMO2, SUMO2, SUMO2, SUMO2,
SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, SUMO, ATI Radeon HD 4200,
ATI Radeon 4100, ATI Mobility Radeon HD 4200,
ATI Mobility Radeon 4100, ATI Radeon HD 4290, ATI Radeon HD 4250,
AMD Radeon HD 6310 Graphics, AMD Radeon HD 6310 Graphics,
AMD Radeon HD 6250 Graphics, AMD Radeon HD 6250 Graphics,
AMD Radeon HD 6300 Series Graphics,
AMD Radeon HD 6200 Series Graphics, PALM, PALM, PALM, CYPRESS,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, AMD Firestream 9370,
AMD Firestream 9350, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5800 Series,
ATI Radeon HD 5800 Series, ATI Radeon HD 5900 Series,
ATI Radeon HD 5900 Series, ATI Mobility Radeon HD 5800 Series,
ATI Mobility Radeon HD 5800 Series,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter,
ATI Mobility Radeon HD 5800 Series, ATI Radeon HD 5700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Radeon HD 5700 Series, ATI Radeon HD 6700 Series,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon HD 5570,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI Radeon HD 5670,
ATI Radeon HD 5570, ATI Radeon HD 5500 Series, REDWOOD,
ATI Mobility Radeon HD 5000 Series,
ATI Mobility Radeon HD 5000 Series, ATI Mobility Radeon Graphics,
ATI Mobility Radeon Graphics, CEDAR,
ATI FirePro (FireGL) Graphics Adapter,
ATI FirePro (FireGL) Graphics Adapter, ATI FirePro 2270, CEDAR,
ATI Radeon HD 5450, CEDAR, CEDAR, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN, CAYMAN,
AMD Radeon HD 6900 Series, AMD Radeon HD 6900 Series, CAYMAN, CAYMAN,
CAYMAN, AMD Radeon HD 6900M Series, Mobility Radeon HD 6000 Series,
BARTS, BARTS, Mobility Radeon HD 6000 Series,
Mobility Radeon HD 6000 Series, BARTS, BARTS, BARTS, BARTS,
AMD Radeon HD 6800 Series, AMD Radeon HD 6800 Series,
AMD Radeon HD 6700 Series, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS, TURKS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS,
CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, CAICOS, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA, ARUBA,
ARUBA, ARUBA, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI,
TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, TAHITI, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN,
PITCAIRN, PITCAIRN, PITCAIRN, PITCAIRN, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE, VERDE,
VERDE, VERDE, VERDE, VERDE, VERDE, VERDE
[ 17.292] (++) using VT number 7
[ 17.307] (II) [KMS] Kernel modesetting enabled.
[ 17.307] (II) RADEON(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 17.307] (==) RADEON(0): Depth 24, (--) framebuffer bpp 32
[ 17.307] (II) RADEON(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 17.307] (==) RADEON(0): Default visual is TrueColor
[ 17.307] (==) RADEON(0): RGB weight 888
[ 17.307] (II) RADEON(0): Using 8 bits per RGB (8 bit DAC)
[ 17.307] (--) RADEON(0): Chipset: "ATI Radeon HD 4770" (ChipID = 0x94b3)
[ 17.307] (II) Loading sub module "dri2"
[ 17.307] (II) LoadModule: "dri2"
[ 17.307] (II) Module "dri2" already built-in
[ 17.307] (II) Loading sub module "exa"
[ 17.307] (II) LoadModule: "exa"
[ 17.308] (II) Loading /usr/lib/xorg/modules/libexa.so
[ 17.350] (II) Module exa: vendor="X.Org Foundation"
[ 17.350] compiled for 1.14.2, module version = 2.6.0
[ 17.350] ABI class: X.Org Video Driver, version 14.1
[ 17.350] (II) RADEON(0): KMS Color Tiling: enabled
[ 17.350] (II) RADEON(0): KMS Color Tiling 2D: enabled
[ 17.350] (II) RADEON(0): KMS Pageflipping: enabled
[ 17.350] (II) RADEON(0): SwapBuffers wait for vsync: enabled
[ 17.370] (II) RADEON(0): Output DVI-0 has no monitor section
[ 17.390] (II) RADEON(0): Output DIN has no monitor section
[ 17.421] (II) RADEON(0): Output DVI-1 has no monitor section
[ 17.440] (II) RADEON(0): EDID for output DVI-0
[ 17.460] (II) RADEON(0): EDID for output DIN
[ 17.491] (II) RADEON(0): EDID for output DVI-1
[ 17.491] (II) RADEON(0): Manufacturer: BNQ Model: 7841 Serial#: 21573
[ 17.491] (II) RADEON(0): Year: 2009 Week: 38
[ 17.491] (II) RADEON(0): EDID Version: 1.3
[ 17.491] (II) RADEON(0): Analog Display Input, Input Voltage Level: 0.700/0.300 V
[ 17.491] (II) RADEON(0): Sync: Separate Composite SyncOnGreen
[ 17.491] (II) RADEON(0): Max Image Size [cm]: horiz.: 53 vert.: 29
[ 17.491] (II) RADEON(0): Gamma: 2.20
[ 17.491] (II) RADEON(0): DPMS capabilities: Off; RGB/Color Display
[ 17.491] (II) RADEON(0): Default color space is primary color space
[ 17.491] (II) RADEON(0): First detailed timing is preferred mode
[ 17.491] (II) RADEON(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
[ 17.491] (II) RADEON(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
[ 17.491] (II) RADEON(0): Supported established timings:
[ 17.491] (II) RADEON(0): 720x400@70Hz
[ 17.491] (II) RADEON(0): 640x480@60Hz
[ 17.491] (II) RADEON(0): 640x480@75Hz
[ 17.491] (II) RADEON(0): 800x600@60Hz
[ 17.491] (II) RADEON(0): 800x600@75Hz
[ 17.491] (II) RADEON(0): 832x624@75Hz
[ 17.491] (II) RADEON(0): 1024x768@60Hz
[ 17.491] (II) RADEON(0): 1024x768@75Hz
[ 17.491] (II) RADEON(0): 1280x1024@75Hz
[ 17.491] (II) RADEON(0): 1152x864@75Hz
[ 17.491] (II) RADEON(0): Manufacturer's mask: 0
[ 17.491] (II) RADEON(0): Supported standard timings:
[ 17.491] (II) RADEON(0): #0: hsize: 1152 vsize 720 refresh: 60 vid: 113
[ 17.491] (II) RADEON(0): #1: hsize: 1280 vsize 720 refresh: 60 vid: 49281
[ 17.491] (II) RADEON(0): #2: hsize: 1280 vsize 960 refresh: 60 vid: 16513
[ 17.491] (II) RADEON(0): #3: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 17.491] (II) RADEON(0): #4: hsize: 1600 vsize 900 refresh: 60 vid: 49321
[ 17.491] (II) RADEON(0): #5: hsize: 1680 vsize 1050 refresh: 60 vid: 179
[ 17.491] (II) RADEON(0): #6: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 17.491] (II) RADEON(0): Supported detailed timing:
[ 17.491] (II) RADEON(0): clock: 148.5 MHz Image Size: 477 x 268 mm
[ 17.491] (II) RADEON(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 17.491] (II) RADEON(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 17.491] (II) RADEON(0): Serial No: F9904610SL000
[ 17.491] (II) RADEON(0): Ranges: V min: 50 V max: 76 Hz, H min: 24 H max: 83 kHz, PixClock max 175 MHz
[ 17.491] (II) RADEON(0): Monitor name: BenQ G2420HDB
[ 17.491] (II) RADEON(0): EDID (in hex):
[ 17.491] (II) RADEON(0): 00ffffffffffff0009d1417845540000
[ 17.491] (II) RADEON(0): 261301030e351d782e6085a6564a9c25
[ 17.491] (II) RADEON(0): 125054a56b80710081c081408180a9c0
[ 17.491] (II) RADEON(0): b300d1c00101023a801871382d40582c
[ 17.491] (II) RADEON(0): 4500dd0c1100001e000000ff00463939
[ 17.491] (II) RADEON(0): 3034363130534c303030000000fd0032
[ 17.491] (II) RADEON(0): 4c185311000a202020202020000000fc
[ 17.491] (II) RADEON(0): 0042656e512047323432304844420076
[ 17.491] (II) RADEON(0): Printing probed modes for output DVI-1
[ 17.491] (II) RADEON(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
[ 17.491] (II) RADEON(0): Modeline "1680x1050"x60.0 146.25 1680 1784 1960 2240 1050 1053 1059 1089 -hsync +vsync (65.3 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1600x900"x60.0 118.96 1600 1696 1864 2128 900 901 904 932 -hsync +vsync (55.9 kHz)
[ 17.492] (II) RADEON(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1280x960"x60.0 108.00 1280 1376 1488 1800 960 961 964 1000 +hsync +vsync (60.0 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 17.492] (II) RADEON(0): Modeline "1152x720"x60.0 67.28 1152 1208 1328 1504 720 721 724 746 -hsync +vsync (44.7 kHz)
[ 17.492] (II) RADEON(0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
[ 17.492] (II) RADEON(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
[ 17.492] (II) RADEON(0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
[ 17.492] (II) RADEON(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
[ 17.492] (II) RADEON(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
[ 17.492] (II) RADEON(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
[ 17.492] (II) RADEON(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
[ 17.492] (II) RADEON(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
[ 17.492] (II) RADEON(0): Output DVI-0 disconnected
[ 17.492] (II) RADEON(0): Output DIN disconnected
[ 17.492] (II) RADEON(0): Output DVI-1 connected
[ 17.492] (II) RADEON(0): Using exact sizes for initial modes
[ 17.492] (II) RADEON(0): Output DVI-1 using initial mode 1920x1080
[ 17.492] (II) RADEON(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 17.492] (II) RADEON(0): mem size init: gart size :1fdee000 vram size: s:20000000 visible:1f7d7000
[ 17.492] (II) RADEON(0): EXA: Driver will allow EXA pixmaps in VRAM
[ 17.492] (==) RADEON(0): DPI set to (96, 96)
[ 17.492] (II) Loading sub module "fb"
[ 17.492] (II) LoadModule: "fb"
[ 17.492] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 17.567] (II) Module fb: vendor="X.Org Foundation"
[ 17.567] compiled for 1.14.2, module version = 1.0.0
[ 17.567] ABI class: X.Org ANSI C Emulation, version 0.4
[ 17.567] (II) Loading sub module "ramdac"
[ 17.567] (II) LoadModule: "ramdac"
[ 17.567] (II) Module "ramdac" already built-in
[ 17.567] (--) Depth 24 pixmap format is 32 bpp
[ 17.568] (II) RADEON(0): [DRI2] Setup complete
[ 17.568] (II) RADEON(0): [DRI2] DRI driver: r600
[ 17.568] (II) RADEON(0): [DRI2] VDPAU driver: r600
[ 17.568] (II) RADEON(0): Front buffer size: 8160K
[ 17.568] (II) RADEON(0): VRAM usage limit set to 456966K
[ 17.569] (==) RADEON(0): Backing store disabled
[ 17.569] (II) RADEON(0): Direct rendering enabled
[ 17.569] (II) EXA(0): Driver allocated offscreen pixmaps
[ 17.569] (II) EXA(0): Driver registered support for the following operations:
[ 17.569] (II) Solid
[ 17.570] (II) Copy
[ 17.570] (II) Composite (RENDER acceleration)
[ 17.570] (II) UploadToScreen
[ 17.570] (II) DownloadFromScreen
[ 17.570] (II) RADEON(0): Acceleration enabled
[ 17.570] (==) RADEON(0): DPMS enabled
[ 17.570] (==) RADEON(0): Silken mouse enabled
[ 17.570] (II) RADEON(0): Set up textured video
[ 17.570] (II) RADEON(0): [XvMC] Associated with Radeon Textured Video.
[ 17.570] (II) RADEON(0): [XvMC] Extension initialized.
[ 17.570] (II) RADEON(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 17.571] (--) RandR disabled
[ 20.549] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
[ 20.549] (II) AIGLX: enabled GLX_INTEL_swap_event
[ 20.549] (II) AIGLX: enabled GLX_ARB_create_context
[ 20.549] (II) AIGLX: enabled GLX_ARB_create_context_profile
[ 20.549] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
[ 20.549] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
[ 20.549] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
[ 20.552] (II) AIGLX: Loaded and initialized r600
[ 20.552] (II) GLX: Initialized DRI2 GL provider for screen 0
[ 20.553] (II) RADEON(0): Setting screen physical size to 508 x 285
[ 21.889] (II) config/udev: Adding input device Power Button (/dev/input/event5)
[ 21.889] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 21.889] (II) LoadModule: "evdev"
[ 21.890] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 21.925] (II) Module evdev: vendor="X.Org Foundation"
[ 21.925] compiled for 1.14.2, module version = 2.8.1
[ 21.925] Module class: X.Org XInput Driver
[ 21.925] ABI class: X.Org XInput driver, version 19.1
[ 21.925] (II) Using input driver 'evdev' for 'Power Button'
[ 21.925] (**) Power Button: always reports core events
[ 21.925] (**) evdev: Power Button: Device: "/dev/input/event5"
[ 21.925] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 21.925] (--) evdev: Power Button: Found keys
[ 21.925] (II) evdev: Power Button: Configuring as keyboard
[ 21.925] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
[ 21.925] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 21.925] (**) Option "xkb_rules" "evdev"
[ 21.925] (**) Option "xkb_model" "pc104"
[ 21.925] (**) Option "xkb_layout" "fi"
[ 21.925] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.026] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 22.027] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 22.027] (II) Using input driver 'evdev' for 'Power Button'
[ 22.027] (**) Power Button: always reports core events
[ 22.027] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 22.027] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 22.027] (--) evdev: Power Button: Found keys
[ 22.027] (II) evdev: Power Button: Configuring as keyboard
[ 22.027] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 22.027] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 22.027] (**) Option "xkb_rules" "evdev"
[ 22.027] (**) Option "xkb_model" "pc104"
[ 22.027] (**) Option "xkb_layout" "fi"
[ 22.027] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.028] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event1)
[ 22.028] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 22.028] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 22.028] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 22.028] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event1"
[ 22.028] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Vendor 0x45e Product 0x745
[ 22.028] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 22.028] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 22.029] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.0/input/input1/event1"
[ 22.029] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD, id 8)
[ 22.029] (**) Option "xkb_rules" "evdev"
[ 22.029] (**) Option "xkb_model" "pc104"
[ 22.029] (**) Option "xkb_layout" "fi"
[ 22.029] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.030] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event2)
[ 22.030] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev pointer catchall"
[ 22.030] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 22.030] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 22.030] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 22.030] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event2"
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Vendor 0x45e Product 0x745
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found 9 mouse buttons
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found scroll wheel(s)
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found relative axes
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found x and y relative axes
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute axes
[ 22.030] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Forcing absolute x/y axes to exist.
[ 22.030] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 22.030] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as mouse
[ 22.030] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 22.030] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Adding scrollwheel support
[ 22.031] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: YAxisMapping: buttons 4 and 5
[ 22.031] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.031] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.1/input/input2/event2"
[ 22.031] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD, id 9)
[ 22.031] (**) Option "xkb_rules" "evdev"
[ 22.031] (**) Option "xkb_model" "pc104"
[ 22.031] (**) Option "xkb_layout" "fi"
[ 22.031] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.031] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: initialized for relative axes.
[ 22.031] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: ignoring absolute axes.
[ 22.032] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) keeping acceleration scheme 1
[ 22.032] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration profile 0
[ 22.032] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration factor: 2.000
[ 22.032] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration threshold: 4
[ 22.033] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/mouse1)
[ 22.033] (II) No input driver specified, ignoring this device.
[ 22.033] (II) This device may have been added with another device file.
[ 22.033] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/event3)
[ 22.033] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: Applying InputClass "evdev keyboard catchall"
[ 22.033] (II) Using input driver 'evdev' for 'Microsoft Microsoft® 2.4GHz Transceiver v6.0'
[ 22.033] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: always reports core events
[ 22.033] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Device: "/dev/input/event3"
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Using mtdev for this device
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Vendor 0x45e Product 0x745
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found 1 mouse buttons
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found scroll wheel(s)
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found relative axes
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute axes
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found absolute multitouch axes
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found x and y absolute axes
[ 22.033] (--) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Found keys
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Forcing relative x/y axes to exist.
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as mouse
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Configuring as keyboard
[ 22.033] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: Adding scrollwheel support
[ 22.033] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: YAxisMapping: buttons 4 and 5
[ 22.033] (**) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.033] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:02.0/usb3/3-5/3-5:1.2/input/input3/event3"
[ 22.033] (II) XINPUT: Adding extended input device "Microsoft Microsoft® 2.4GHz Transceiver v6.0" (type: KEYBOARD, id 10)
[ 22.033] (**) Option "xkb_rules" "evdev"
[ 22.033] (**) Option "xkb_model" "pc104"
[ 22.033] (**) Option "xkb_layout" "fi"
[ 22.033] (**) Option "xkb_options" "ctrl:nocaps"
[ 22.034] (II) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: initialized for relative axes.
[ 22.034] (WW) evdev: Microsoft Microsoft® 2.4GHz Transceiver v6.0: ignoring absolute axes.
[ 22.034] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) keeping acceleration scheme 1
[ 22.034] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration profile 0
[ 22.034] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration factor: 2.000
[ 22.034] (**) Microsoft Microsoft® 2.4GHz Transceiver v6.0: (accel) acceleration threshold: 4
[ 22.034] (II) config/udev: Adding input device Microsoft Microsoft® 2.4GHz Transceiver v6.0 (/dev/input/js0)
[ 22.034] (II) No input driver specified, ignoring this device.
[ 22.034] (II) This device may have been added with another device file.
[ 22.034] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event0)
[ 22.034] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 22.034] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 22.034] (**) Logitech USB Receiver: always reports core events
[ 22.034] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event0"
[ 22.034] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc51b
[ 22.034] (--) evdev: Logitech USB Receiver: Found 12 mouse buttons
[ 22.034] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 22.034] (--) evdev: Logitech USB Receiver: Found relative axes
[ 22.034] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 22.034] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 22.034] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 22.034] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 22.034] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 22.034] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:04.0/usb4/4-1/4-1:1.0/input/input0/event0"
[ 22.034] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 11)
[ 22.034] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 22.034] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 22.034] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 22.034] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 22.034] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 22.035] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding input device HDA NVidia Line Out (/dev/input/event7)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding input device HDA NVidia Line (/dev/input/event8)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding input device HDA NVidia Rear Mic (/dev/input/event9)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding drm device (/dev/dri/card0)
[ 22.035] (II) config/udev: Adding input device HDA ATI HDMI HDMI/DP,pcm=3 (/dev/input/event10)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 22.035] (II) config/udev: Adding input device PC Speaker (/dev/input/event6)
[ 22.035] (II) No input driver specified, ignoring this device.
[ 22.035] (II) This device may have been added with another device file.
[ 30.896] (II) AIGLX: Suspending AIGLX clients for VT switch
I'm using open drivers for my Radeon HD4770.
Same problem persists with all gtk themes.
Last edited by laite (2013-07-26 16:28:49)I have the same problem too. the same graphic card model.
I temporarily change the driver to 'vesa' or 'fbdev' to make it render right.
but it may cause the resolution smaller.
any suggestion ?
pacman -Qi linux
Name : linux
Version : 3.10.2-1
Description : The Linux kernel and modules
Architecture : x86_64
URL : http://www.kernel.org/
Licenses : GPL2
Groups : base
Provides : kernel26=3.10.2
Depends On : coreutils linux-firmware kmod mkinitcpio>=0.7
Optional Deps : crda: to set the correct wireless channels of your country
[installed]
Required By : None
Optional For : None
Conflicts With : kernel26
Replaces : kernel26
Installed Size : 66453.00 KiB
Packager : Tobias Powalowski <[email protected]>
Build Date : Mon Jul 22 14:52:41 2013
Install Date : Fri Jul 26 00:23:13 2013
Install Reason : Explicitly installed
Install Script : Yes
Validated By : Signature
pacman -Qi pango
Name : pango
Version : 1.34.1-1
Description : A library for layout and rendering of text
Architecture : x86_64
URL : http://www.pango.org/
Licenses : LGPL
Groups : None
Provides : None
Depends On : libthai cairo libxft harfbuzz
Optional Deps : None
Required By : cogl gst-plugins-base gstreamer0.10-base-plugins gtk2 gtk3
librsvg libtiger pangomm
Optional For : None
Conflicts With : None
Replaces : None
Installed Size : 3682.00 KiB
Packager : Jan Alexander Steffens (heftig) <[email protected]>
Build Date : Tue May 14 01:42:00 2013
Install Date : Fri Jul 26 01:08:47 2013
Install Reason : Installed as a dependency for another package
Install Script : Yes
Validated By : Signature
Last edited by Ashur (2013-07-26 17:48:58) -
OMG! No Services and Touch ID no longer working anymore after i upgraded my Iphone 6 from IOS 8.00 to 8.02 today!!!! Any Idea how to fix this?
Go to settings do a reset after that tou will need to enter you Router wireless key Then wait for iPhone to come on. This worked for me on iPhone & ipad. Bsydd uk
-
Hi All,
Automatically call is going to someperson in the contact list after latest upgrade in iphone 5s
Thanks and Regards,
RaghulBasic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
-
[SOLVED] Another "Sound broken after upgrade" thread
Hi. My sound stopped working at some point, probably after an upgrade. I've seen lot's of posts about this in the last month, but nothing is helping. My guess is that OSS is screwing with ALSA. Here is what it says in my pacman log.
Running OSS update script...
[2011-12-05 13:34]
[2011-12-05 13:34] -------------------------------------------------------------
[2011-12-05 13:34] Open Sound System was updated. Now you should restart the
[2011-12-05 13:34] daemon by running /etc/rc.d/oss restart.
[2011-12-05 13:34]
[2011-12-05 13:34] Please note that OSS stores some of its configuration files
[2011-12-05 13:34] at /usr/lib/oss. If you are upgrading from an older OSS
[2011-12-05 13:34] release and it doesn't work properly, try removing that
[2011-12-05 13:34] directory and reinstall this package.
[2011-12-05 13:34] -------------------------------------------------------------
[2011-12-05 13:34] upgraded oss (4.2_2005-1 -> 4.2_2005-2)
I tried removing the directory and reinstalling oss, but that didn't work. I also tried removing oss altogether, but pacman says that lib32-libflashsupport: requires oss. So I'm not sure what to do. I was trying this
http://wiki.archbang.org/index.php?titl … _with_Alsa
but I got the dependency conflict with libflashsupport.
What I want to do is force remove oss via pacman -Rf oss, then install the alsa-oss emulator, but I'm not sure if that will break something else.
I'm also willing to just wait and see if the next kernel update will fix it, if that doesn't take too long. I don't really use sound very often anyway, but I still want it to work. I'm running this kernel
Linux version 3.1.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
Thanks for any help.
Last edited by Pacopag (2012-01-09 14:57:18)Sorry for bumping this rather useless post. But I just wanted to mention that the problem is fixed. What I did was to follow the link
http://wiki.archbang.org/index.php?titl … _with_Alsa
(but I don't know that even has anything to do with the solution, because the sound didn't work after doing this.)
But then, just today, there was a kernel upgrade, and now the sound works. Big thanks to the arch team.
Last edited by Pacopag (2012-01-09 14:56:41) -
[SOLVED] After latest upgrad. Boots to grub prompt
Hi,
I just upgraded my Thinkpad T61 following
https://www.archlinux.org/news/binaries … ervention/
After completeing the upgrade I got an error "Unable to start shell:/bin/bash" in Terminator. I commented out /dev/pts in /etc/fstab following
https://bbs.archlinux.org/viewtopic.php?id=169076
the problem did not go away. I decided to reboot After which the computer boots only to a grub prompt.
I'm posting this after booting with a linuxmint USB stick so Ihave access to the / partition on the laptop.
I've been on systemd for a while now. However I now suspect that I was not fully migrated to systemd. I did do a pacman -R initscripts during the latest upgrade.
Does anybody know how I can recover from this?
need all the help I can get on this one!
Last edited by emk (2013-09-02 03:22:05)Trilby, you are correct the empty /boot was because I neglected to mount the /boot partition. My mistake.
2. I did have errors as per https://www.archlinux.org/news/binaries … ervention/ i.e the upgrade failed because /bin /sbin were still in the filesystem. I followed the steps in the link and found some files that were holding things up.
I removed the following files
pacman -R gen-init-cpio wlan-ng26-utils consolekit dcron hpoj initscripts tcp_wrappers
I boot via systemd though I suspect now I was not fully migrated.
3. Output of ls on boot partition:
mint e3beb7a9-4c88-4688-8a2d-a00946489a3f # ls -l
total 21258
drwxr-xr-x 2 root root 1024 Sep 2 00:22 grub
-rw-r--r-- 1 root root 14869898 Sep 2 00:25 initramfs-linux-fallback.img
-rw-r--r-- 1 root root 3010076 Sep 2 00:25 initramfs-linux.img
lrwxrwxrwx 1 root root 28 Aug 21 2011 kernel26-fallback.img -> initramfs-linux-fallback.img
lrwxrwxrwx 1 root root 19 Aug 21 2011 kernel26.img -> initramfs-linux.img
drwx------ 2 root root 12288 May 11 2010 lost+found
drwxr-xr-x 2 root root 1024 Sep 2 00:28 syslinux
lrwxrwxrwx 1 root root 13 Aug 21 2011 vmlinuz26 -> vmlinuz-linux
-rw-r--r-- 1 root root 3783360 Aug 30 09:33 vmlinuz-linux
mint e3beb7a9-4c88-4688-8a2d-a00946489a3f #
4. You are probably right. I have both grub 0.97 and grub 2 in the pacman pkg cache
5. I did follow the steps except that trying to close a terminal once the bash error croped up led to my being logged out before I could run the last two commands 'pacman -S bash and Pacman -Su'
Thanks Trilby. I feel like my Linux chops are evaporating the older I get :0 -
[Solved]No sound anymore (ALSA/PulseAudio)
Ok so I have no idea why I have no sound anymore, I didn't install anything...
Anyway, that's what I've tried:
-Check if mixer are all up in alsamixer
-Try to play a bit with pavucontrol
-Reboot
-Rerun pulseaudio with verbose
-Mute and unmute with physical button (I don't know why but I used to get this problem and it used to be solved just doing this)
-Googgling and searching this forum
Here are some more info
Pulseaudio logs:
└┼─$─┤▶ pulseaudio -k; pulseaudio -vvvvv
E: [pulseaudio] main.c: Failed to kill daemon: No such process
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is a3af3988434b49f3b8af2ab66eba685b.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1001/pulse.
I: [pulseaudio] main.c: Using state directory /home/unkn0wn/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-jackdbus-detect.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c9a6328a5bfaef44136d134253502922 as :1.32
D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "channels=2").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-policy.so': success
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-discover.so': success
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez5-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 54d6e91cb1d72b925a540cf453502907 as :1.40
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez4-discover.so': failure
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null: front-left: 99957 / 153%, front-right: 99957 / 153%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink auto_null.
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: device.description = "Dummy Output"
I: [pulseaudio] sink.c: device.class = "abstract"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-device-restore.c: Restoring mute state for source auto_null.monitor.
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
D: [null-sink] module-null-sink.c: Thread starting up
D: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #16; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-console-kit.so': success
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-systemd-login.so': success
I: [pulseaudio] client.c: Created 0 "Login Session c1"
D: [pulseaudio] module-systemd-login.c: Added new session c1
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: Daemon startup complete.
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
I: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle f
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
-I see the mixer going up and down in pavucontrol if I play some music
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
└┼─$─┤▶ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
└┼─$─┤▶ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, CX20590 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
Don't really know what else to provide...
About my setup it's a thinkpad t420 not plugged in any hdmi screen or simething like that
Thank you
Last edited by Truc (2014-04-19 13:15:28)└┼─$─┤▶ fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: unkn0wn 2231 F.... volumeicon
└┼─$─┤▶ speaker-test -c 2 -t wav -D plughw:0,0
speaker-test 1.0.27.2
Playback device is plughw:0,0
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Playback open error: -16,Device or resource busy
It says it's busy but I don't see anything that could use it. I quit skype before trying -
Some Widget does not work after latest upgrade
Today is July 23rd, 2011. By recent latest upgrade, mainly for supporting Lion, where I am still using Snow Leopard 10.6.8, some widget does not work, including Battery Meter, Digital Clock Alarm, Victoria Digital Clock, etc.
By the way, my company use Chatter and I installed Chatter Desktop. Again, after recent upgrade, it no longer work anymore.
Do you experience the same problem?
For those who has upgraded to Lion, do you also find some widget does not work?I have read a couple of complaints like that, but not sure it's widespread.
At this point I think you should get Applejack...
http://www.macupdate.com/info.php/id/15667/applejack
After installing, reboot holding down CMD+s, (+s), then when the DOS like prompt shows, type in...
applejack AUTO
Then let it do all 6 of it's things.
At least it'll eliminate some questions if it doesn't fix it.
The 6 things it does are...
Correct any Disk problems.
Repair Permissions.
Clear out Cache Files.
Repair/check several plist files.
Dump the VM files for a fresh start.
Trash old Log files.
First reboot will be slower, sometimes 2 or 3 restarts will be required for full benefit... my guess is files relying upon other files relying upon other files! :-)
Disconnect the USB cable from any Uninterruptible Power Supply so the system doesn't shut down in the middle of the process.
If that does NOT help, Safe Boot , (holding Shift key down at bootup), use Disk Utility from there to Repair Permissions, test if things work OK in Safe Mode.
Then move these files to the Desktop...
/Users/YourUserName/Library/Preferences/com.apple.finder.plist
/Users/YourUserName/Library/Preferences/com.apple.systempreferences.plist
/Users/YourUserName/Library/Preferences/com.apple.desktop.plist
/Users/YourUserName/Library/Preferences/com.apple.recentitems.plist
Reboot & test.
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive.
If that does NOT help then I suspect the optical drive or media itself, or possibly just needs a cleaning CD run on it. -
No sound anymore after installing XP Home on Satellite Pro 4600
Hi gents,
I don't have any sound more after I have installed winxp home on my Pro 4600. I used the problem solve wizard but without any improvements. I have also installed the latest sound driver and bios.
Looking forward to some replies, .............HarryHe Eldorado,
You teached me a wise lesson "first look to the obvious things". And yes it was the volume controller at the side (did not know there was one). But anyway problem is solved
Thanks...........Harry -
ALSA often doesn't produce sound anymore after suspend
Hi,
For some years this has been fine and pulseaudio worked fine after waking up from suspend.
But for about one or two month it more and more often doesn't. After waking up from suspend I just don't hear sound anymore. I can't find any error message anywhere, just that it doesn't output sound anymore. Killing it with "pulseaudio -k" or "pkill pulseaudio" or "pkill -9 pulseaudio" doesn't solve it. But "telinit 1", waiting until pulseaudio is dead and then "telinit 5" solves it so it is definitely not my sound driver.
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
Any ideas how I can find out what's wrong?
Last edited by Cdh (2012-05-10 19:48:45)Maybe the power saving for my sound chip triggered the problem. I had this in my startup config:
echo 1 > /sys/module/snd_hda_intel/parameters/power_save
I have removed it and hadn't had that problem so far. If it doesn't happen in the next time I'll mark this as solved. :-/
EDIT:
Nope, it didn't help. Today after waking up from suspend it didn't output any sound although everything seemed fine.
This time I tried transferring the sound over the network with pulseaudio. That worked.
Then I killed everything and even went to init 1. But there not even mplayer -ao alsa worked and I had to reboot to get my sound back. So, not pulseaudio's fault, but alsa doesn't work right.
Linux chrisl 3.4.0-1-mainline #1 SMP PREEMPT Mon May 7 11:06:02 UTC 2012 x86_64 Intel(R) Core(TM) i5 CPU M 480 @ 2.67GHz GenuineIntel GNU/Linux
Last edited by Cdh (2012-05-10 19:51:19) -
After latest upgrade, iPOD sync VERY SLOW ??
after latest iTunes upgrade, my iPOD classic sync is very slow - new podcasts (5) took over 6 hrs to sync ??
anyone having these issues ?? thxf you change your Sync password, you might see this error message on your other devices "Sync encountered an error while connecting: Incorrect name or password." error appears in the bottom error bar. You can update your password on your device by completing the following steps:
* Click the '''menu button''' and choose '''Options'''.
* Select the '''Sync''' panel.
* Click ''''''Sign in'''''' and enter your password in the sign in page.
* Click '''Sign in''' to sign back in to Sync. -
Unknown Error 13019 After Latest Upgrade
After performing the latest upgrade to my 3GS yesterday, whenever I synch it, it appears to finish but then gives the message at the end "... iPhone cannot be synched. An unknown error occurred (13019)." Everything seems to work afterwards. Any ideas/suggestions?
TIA!After Restoring my iPhone, I was able to Re-Sync it with my Mac. It took about 20-30 minutes, but it worked. No more "unknown error 13019."
I tried unsyncing and syncing and all that and it did not make the error message go away.
Fortunately, I did not loose any info before or after this happened.
Maybe you are looking for
-
How To: Get Your Creative Zen Working With Vis
I am an owner of the now outdated Zen 20gb HD0005. Upgraded to Vista Business recently and have not been able to get the player working, the installation cd wouldnt work and neither would the updates at uk.creative.com There is a way! Go to http://us
-
I have several VIs that use the same typedef. This "super" typedef consists of of a cluster containing 6 arrays. Each array has elements that are themselves typedefs. The array element typedefs consist of a cluster of strings, a string array, and yet
-
Does Oracle 10g express edition supports UTL_SMTP
Currently i'm using ORacle 10g Express edition, is it possible to send an automatic email once a value updates a table. Does 10gExpress edition supports UTL_SMTP or UTL_MAIL. If supports let me know how to configure in 10gExpress edition .
-
Add a Monitor. How and which graphics card?
I have just bought the Premiere CS3 upgrade and have startet working with it. I was wondering how it would be possible to connect my Sony Bravia or Pioneer plasma (both HD ready) in order to preview the editing. I am an amateur who cannot find the su
-
Creating a Business Sign in CS3
I have run into a problem I am not sure how to solve. Anyone's help will be greatly appreciated. I have been using CS3 flawlessly for sometime. However I am trying to do something that I am now having problems with. I am trying to design a business s