[SOLVED}No Sound Asus N550JV
Hi All
Just purchased an Asus N550JV which i'm dual booting, but I have no sound through either the internal speakers, headphones or woofer .... Anyone else here with this laptop having trouble ?
Cheers
Last edited by whitetimer (2014-12-13 22:22:57)
Got audio and subwoofer working very nicely. Only issued now is no youtube playback.
Similar Messages
-
Xorg timeout at boot - ASUS N550JV
Hello everybody,
I've become an Arch user since only a few months and this is the first time I
write on this forum, so forgive me for any mistake on the section I have to use.
I was not sure if I had to post this problem here or in the "Kernel & Hardware"
section, since it seems to be quite serious.
My problem is that, randomly at boot, Xorg and other services give an error
message regarding a timeout that has been reached and obviously this prevents
KDM from starting. I have tried to figure out what the problem is analyzing both
"dmesg" output and "Xorg.0.log".
The result is that I have found some error messages but I'm not able to figure
out which is the true cause of my problem.
The problems I have are related with:
Nouveau: My ASUS N550JV has an Nvidia Optimus configuration on a GeForce 750M
which creates many error messages, but those are the same whether the system boots
up correctly or it doesn't.
ELAN Touchscreen: My touchscreen keeps connecting and disconnecting about 20
times during boot and then it start working. This leads to various messages
regarding it. (It is always on port 10 of usb bus 1 or 3)
systemd-logind: In Xorg I get an error regarding this process.
I have tried to set the touchscreen as unauthorized through a udev rule but the
only result is that I have an infinite series of connections and disconnections
instead of only 20.
Here are my logs:
dmesg - correct boot:
[ 0.000000] CPU0 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=890c99f6-7784-4c48-8533-624b3c868983 rw quiet splash acpi_osi=
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
[ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009dfff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009e000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b9bbbfff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b9bbc000-0x00000000b9bc2fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b9bc3000-0x00000000ba3fafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000ba3fb000-0x00000000ba680fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ba681000-0x00000000c98eafff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c98eb000-0x00000000c9af2fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000c9af3000-0x00000000c9e25fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000c9e26000-0x00000000cab25fff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000cab26000-0x00000000caf59fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000caf5a000-0x00000000caffefff] type 20
[ 0.000000] BIOS-e820: [mem 0x00000000cafff000-0x00000000caffffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000cbc00000-0x00000000cfdfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042f1fffff] usable
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] efi: EFI v2.31 by American Megatrends
[ 0.000000] efi: ACPI 2.0=0xc9eae000 ACPI=0xc9eae000 SMBIOS=0xcaf58418
[ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000058000) (0MB)
[ 0.000000] efi: mem01: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
[ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009e000) (0MB)
[ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x000000000009e000-0x00000000000a0000) (0MB)
[ 0.000000] efi: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x0000000001053000) (15MB)
[ 0.000000] efi: mem05: type=7, attr=0xf, range=[0x0000000001053000-0x0000000002000000) (15MB)
[ 0.000000] efi: mem06: type=2, attr=0xf, range=[0x0000000002000000-0x0000000002f53000) (15MB)
[ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000002f53000-0x0000000037832000) (840MB)
[ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000037832000-0x0000000037c11000) (3MB)
[ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000037c11000-0x0000000084a72000) (1230MB)
[ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x0000000084a72000-0x00000000b67a0000) (797MB)
[ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x00000000b67a0000-0x00000000b9b9f000) (51MB)
[ 0.000000] efi: mem12: type=1, attr=0xf, range=[0x00000000b9b9f000-0x00000000b9bbc000) (0MB)
[ 0.000000] efi: mem13: type=10, attr=0xf, range=[0x00000000b9bbc000-0x00000000b9bc3000) (0MB)
[ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000b9bc3000-0x00000000b9d17000) (1MB)
[ 0.000000] efi: mem15: type=3, attr=0xf, range=[0x00000000b9d17000-0x00000000ba3bc000) (6MB)
[ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000ba3bc000-0x00000000ba3d8000) (0MB)
[ 0.000000] efi: mem17: type=3, attr=0xf, range=[0x00000000ba3d8000-0x00000000ba3f2000) (0MB)
[ 0.000000] efi: mem18: type=4, attr=0xf, range=[0x00000000ba3f2000-0x00000000ba3fb000) (0MB)
[ 0.000000] efi: mem19: type=6, attr=0x800000000000000f, range=[0x00000000ba3fb000-0x00000000ba681000) (2MB)
[ 0.000000] efi: mem20: type=4, attr=0xf, range=[0x00000000ba681000-0x00000000ba690000) (0MB)
[ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000ba690000-0x00000000c709a000) (202MB)
[ 0.000000] efi: mem22: type=4, attr=0xf, range=[0x00000000c709a000-0x00000000c7342000) (2MB)
[ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000c7342000-0x00000000c7372000) (0MB)
[ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000c7372000-0x00000000c73a5000) (0MB)
[ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000c73a5000-0x00000000c73be000) (0MB)
[ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000c73be000-0x00000000c8c8c000) (24MB)
[ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000c8c8c000-0x00000000c9624000) (9MB)
[ 0.000000] efi: mem28: type=3, attr=0xf, range=[0x00000000c9624000-0x00000000c98eb000) (2MB)
[ 0.000000] efi: mem29: type=0, attr=0xf, range=[0x00000000c98eb000-0x00000000c9965000) (0MB)
[ 0.000000] efi: mem30: type=0, attr=0xf, range=[0x00000000c9965000-0x00000000c9af3000) (1MB)
[ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000c9af3000-0x00000000c9e1c000) (3MB)
[ 0.000000] efi: mem32: type=2, attr=0xf, range=[0x00000000c9e1c000-0x00000000c9e26000) (0MB)
[ 0.000000] efi: mem33: type=10, attr=0xf, range=[0x00000000c9e26000-0x00000000caaee000) (12MB)
[ 0.000000] efi: mem34: type=10, attr=0xf, range=[0x00000000caaee000-0x00000000cab09000) (0MB)
[ 0.000000] efi: mem35: type=10, attr=0xf, range=[0x00000000cab09000-0x00000000cab0d000) (0MB)
[ 0.000000] efi: mem36: type=10, attr=0xf, range=[0x00000000cab0d000-0x00000000cab10000) (0MB)
[ 0.000000] efi: mem37: type=10, attr=0xf, range=[0x00000000cab10000-0x00000000cab26000) (0MB)
[ 0.000000] efi: mem38: type=6, attr=0x800000000000000f, range=[0x00000000cab26000-0x00000000cae83000) (3MB)
[ 0.000000] efi: mem39: type=6, attr=0x800000000000000f, range=[0x00000000cae83000-0x00000000caf5a000) (0MB)
[ 0.000000] efi: mem40: type=5, attr=0x800000000000000f, range=[0x00000000caf5a000-0x00000000caf7b000) (0MB)
[ 0.000000] efi: mem41: type=5, attr=0x800000000000000f, range=[0x00000000caf7b000-0x00000000cafff000) (0MB)
[ 0.000000] efi: mem42: type=4, attr=0xf, range=[0x00000000cafff000-0x00000000cb000000) (0MB)
[ 0.000000] efi: mem43: type=7, attr=0xf, range=[0x0000000100000000-0x000000042f200000) (13042MB)
[ 0.000000] efi: mem44: type=0, attr=0x8000000000000000, range=[0x00000000cbc00000-0x00000000cfe00000) (66MB)
[ 0.000000] efi: mem45: type=11, attr=0x8000000000000001, range=[0x00000000f8000000-0x00000000fc000000) (64MB)
[ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
[ 0.000000] efi: mem47: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed04000) (0MB)
[ 0.000000] efi: mem48: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
[ 0.000000] efi: mem49: type=11, attr=0x8000000000000001, range=[0x00000000fee00000-0x00000000fee01000) (0MB)
[ 0.000000] efi: mem50: type=11, attr=0x8000000000000001, range=[0x00000000ff000000-0x0000000100000000) (16MB)
[ 0.000000] SMBIOS 2.7 present.
[ 0.000000] DMI: ASUSTeK COMPUTER INC. N550JV/N550JV, BIOS N550JV.208 11/19/2013
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] e820: last_pfn = 0x42f200 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-DFFFF uncachable
[ 0.000000] E0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
[ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
[ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
[ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
[ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
[ 0.000000] 5 base 00CC000000 mask 7FFC000000 uncachable
[ 0.000000] 6 base 00CBC00000 mask 7FFFC00000 uncachable
[ 0.000000] 7 base 042F800000 mask 7FFF800000 uncachable
[ 0.000000] 8 base 042F400000 mask 7FFFC00000 uncachable
[ 0.000000] 9 base 042F200000 mask 7FFFE00000 uncachable
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820: update [mem 0xcbc00000-0xffffffff] usable ==> reserved
[ 0.000000] e820: last_pfn = 0xcb000 max_arch_pfn = 0x400000000
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
[ 0.000000] Using GB pages for direct mapping
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] BRK [0x02b2f000, 0x02b2ffff] PGTABLE
[ 0.000000] BRK [0x02b30000, 0x02b30fff] PGTABLE
[ 0.000000] BRK [0x02b31000, 0x02b31fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42f000000-0x42f1fffff]
[ 0.000000] [mem 0x42f000000-0x42f1fffff] page 2M
[ 0.000000] BRK [0x02b32000, 0x02b32fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42effffff]
[ 0.000000] [mem 0x42c000000-0x42effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
[ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0xb9bbbfff]
[ 0.000000] [mem 0x00100000-0x001fffff] page 4k
[ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
[ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
[ 0.000000] [mem 0x80000000-0xb99fffff] page 2M
[ 0.000000] [mem 0xb9a00000-0xb9bbbfff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xb9bc3000-0xba3fafff]
[ 0.000000] [mem 0xb9bc3000-0xb9bfffff] page 4k
[ 0.000000] [mem 0xb9c00000-0xba1fffff] page 2M
[ 0.000000] [mem 0xba200000-0xba3fafff] page 4k
[ 0.000000] BRK [0x02b33000, 0x02b33fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xba681000-0xc98eafff]
[ 0.000000] [mem 0xba681000-0xba7fffff] page 4k
[ 0.000000] [mem 0xba800000-0xc97fffff] page 2M
[ 0.000000] [mem 0xc9800000-0xc98eafff] page 4k
[ 0.000000] BRK [0x02b34000, 0x02b34fff] PGTABLE
[ 0.000000] init_memory_mapping: [mem 0xc9af3000-0xc9e25fff]
[ 0.000000] [mem 0xc9af3000-0xc9bfffff] page 4k
[ 0.000000] [mem 0xc9c00000-0xc9dfffff] page 2M
[ 0.000000] [mem 0xc9e00000-0xc9e25fff] page 4k
[ 0.000000] init_memory_mapping: [mem 0xcafff000-0xcaffffff]
[ 0.000000] [mem 0xcafff000-0xcaffffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
[ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
[ 0.000000] RAMDISK: [mem 0x37832000-0x37c10fff]
[ 0.000000] ACPI: Early table checksum verification disabled
[ 0.000000] ACPI: RSDP 0x00000000C9EAE000 000024 (v02 _ASUS_)
[ 0.000000] ACPI: XSDT 0x00000000C9EAE090 0000A4 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FACP 0x00000000C9EC1100 00010C (v05 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: DSDT 0x00000000C9EAE248 012EB5 (v02 _ASUS_ Notebook 00000012 INTL 20120711)
[ 0.000000] ACPI: FACS 0x00000000CAB23080 000040
[ 0.000000] ACPI: APIC 0x00000000C9EC1210 000092 (v03 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: FPDT 0x00000000C9EC12A8 000044 (v01 _ASUS_ Notebook 01072009 AMI 00010013)
[ 0.000000] ACPI: ECDT 0x00000000C9EC12F0 0000C1 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EC13B8 00019D (v01 Intel zpodd 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC1558 000539 (v01 PmRef Cpu0Ist 00003000 INTL 20051117)
[ 0.000000] ACPI: SSDT 0x00000000C9EC1A98 000AD8 (v01 PmRef CpuPm 00003000 INTL 20051117)
[ 0.000000] ACPI: MCFG 0x00000000C9EC2570 00003C (v01 _ASUS_ Notebook 01072009 MSFT 00000097)
[ 0.000000] ACPI: HPET 0x00000000C9EC25B0 000038 (v01 _ASUS_ Notebook 01072009 AMI. 00000005)
[ 0.000000] ACPI: SSDT 0x00000000C9EC25E8 000298 (v01 SataRe SataTabl 00001000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC2880 0042F6 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
[ 0.000000] ACPI: SSDT 0x00000000C9EC6B78 001699 (v01 SgRef SgPeg 00001000 INTL 20091112)
[ 0.000000] ACPI: BGRT 0x00000000C9EC8218 000038 (v00 _ASUS_ Notebook 01072009 ASUS 00010013)
[ 0.000000] ACPI: DMAR 0x00000000C9EC8250 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
[ 0.000000] ACPI: SSDT 0x00000000C9EC8308 0019E3 (v01 OptRef OptTabl 00001000 INTL 20120711)
[ 0.000000] ACPI: MSDM 0x00000000C9AF1E18 000055 (v03 _ASUS_ Notebook 00000000 ASUS 00000001)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042f1fffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42f1fffff]
[ 0.000000] NODE_DATA [mem 0x42f1f5000-0x42f1f8fff]
[ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041e800000-ffff88042e7fffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal [mem 0x100000000-0x42f1fffff]
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x00057fff]
[ 0.000000] node 0: [mem 0x00059000-0x0009dfff]
[ 0.000000] node 0: [mem 0x00100000-0xb9bbbfff]
[ 0.000000] node 0: [mem 0xb9bc3000-0xba3fafff]
[ 0.000000] node 0: [mem 0xba681000-0xc98eafff]
[ 0.000000] node 0: [mem 0xc9af3000-0xc9e25fff]
[ 0.000000] node 0: [mem 0xcafff000-0xcaffffff]
[ 0.000000] node 0: [mem 0x100000000-0x42f1fffff]
[ 0.000000] On node 0 totalpages: 4164398
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 22 pages reserved
[ 0.000000] DMA zone: 3996 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 12839 pages used for memmap
[ 0.000000] DMA32 zone: 821650 pages, LIFO batch:31
[ 0.000000] Normal zone: 52168 pages used for memmap
[ 0.000000] Normal zone: 3338752 pages, LIFO batch:31
[ 0.000000] Reserving Intel graphics stolen memory at 0xcbe00000-0xcfdfffff
[ 0.000000] ACPI: PM-Timer IO Port: 0x1808
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
[ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
[ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
[ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xb9bbc000-0xb9bc2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xba3fb000-0xba680fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc98eb000-0xc9af2fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xc9e26000-0xcab25fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcab26000-0xcaf59fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcaf5a000-0xcaffefff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcb000000-0xcbbfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcbc00000-0xcfdfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xcfe00000-0xf7ffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
[ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
[ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
[ 0.000000] e820: [mem 0xcfe00000-0xf7ffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042ee00000 s86848 r8192 d23744 u262144
[ 0.000000] pcpu-alloc: s86848 r8192 d23744 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4099305
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=890c99f6-7784-4c48-8533-624b3c868983 rw quiet splash acpi_osi=
[ 0.000000] ACPI: _OSI method disabled
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340 using standard form
[ 0.000000] AGP: Checking aperture...
[ 0.000000] AGP: No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 16272992K/16657592K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 384600K reserved)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[ 0.000000] NR_IRQS:8448 nr_irqs:488 0
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 67108864 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 2394.695 MHz processor
[ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4791.94 BogoMIPS (lpj=7982316)
[ 0.000025] pid_max: default: 32768 minimum: 301
[ 0.000030] ACPI: Core revision 20140724
[ 0.014782] ACPI: All ACPI Tables successfully acquired
[ 0.017374] Security Framework initialized
[ 0.017379] Yama: becoming mindful.
[ 0.018076] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
[ 0.020270] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
[ 0.021205] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.021217] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
[ 0.021395] Initializing cgroup subsys memory
[ 0.021399] Initializing cgroup subsys devices
[ 0.021401] Initializing cgroup subsys freezer
[ 0.021402] Initializing cgroup subsys net_cls
[ 0.021404] Initializing cgroup subsys blkio
[ 0.021420] CPU: Physical Processor ID: 0
[ 0.021420] CPU: Processor Core ID: 0
[ 0.021423] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.022200] mce: CPU supports 9 MCE banks
[ 0.022210] CPU0: Thermal monitoring enabled (TM1)
[ 0.022220] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
[ 0.022294] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
[ 0.023649] ftrace: allocating 20675 entries in 81 pages
[ 0.029965] dmar: Host address width 39
[ 0.029967] dmar: DRHD base: 0x000000fed90000 flags: 0x0
[ 0.029973] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
[ 0.029974] dmar: DRHD base: 0x000000fed91000 flags: 0x1
[ 0.029978] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
[ 0.029978] dmar: RMRR base: 0x000000c9a8a000 end: 0x000000c9a96fff
[ 0.029979] dmar: RMRR base: 0x000000cbc00000 end: 0x000000cfdfffff
[ 0.030045] IOAPIC id 2 under DRHD base 0xfed91000 IOMMU 1
[ 0.030045] HPET id 0 under DRHD base 0xfed91000
[ 0.030046] Queued invalidation will be enabled to support x2apic and Intr-remapping.
[ 0.030163] Enabled IRQ remapping in x2apic mode
[ 0.030163] Enabling x2apic
[ 0.030164] Enabled x2apic
[ 0.030169] Switched APIC routing to cluster x2apic.
[ 0.030563] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.063596] smpboot: CPU0: Intel(R) Core(TM) i7-4700HQ CPU @ 2.40GHz (fam: 06, model: 3c, stepping: 03)
[ 0.063602] TSC deadline timer enabled
[ 0.063619] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
[ 0.063633] ... version: 3
[ 0.063634] ... bit width: 48
[ 0.063635] ... generic registers: 4
[ 0.063635] ... value mask: 0000ffffffffffff
[ 0.063636] ... max period: 0000ffffffffffff
[ 0.063637] ... fixed-purpose events: 3
[ 0.063637] ... event mask: 000000070000000f
[ 0.083734] x86: Booting SMP configuration:
[ 0.083736] .... node #0, CPUs: #1
[ 0.094859] CPU1 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.097826] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.104507] #2
[ 0.115604] CPU2 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.125265] #3
[ 0.136363] CPU3 microcode updated early to revision 0x1c, date = 2014-07-03
[ 0.146023] #4 #5 #6 #7
[ 0.221935] x86: Booted up 1 node, 8 CPUs
[ 0.221938] smpboot: Total of 8 processors activated (38330.58 BogoMIPS)
[ 0.227804] devtmpfs: initialized
[ 0.229810] PM: Registering ACPI NVS region [mem 0xb9bbc000-0xb9bc2fff] (28672 bytes)
[ 0.229812] PM: Registering ACPI NVS region [mem 0xc9e26000-0xcab25fff] (13631488 bytes)
[ 0.230475] pinctrl core: initialized pinctrl subsystem
[ 0.230507] RTC time: 19:54:52, date: 11/04/14
[ 0.230569] NET: Registered protocol family 16
[ 0.230644] cpuidle: using governor ladder
[ 0.230646] cpuidle: using governor menu
[ 0.230666] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.230667] ACPI: bus type PCI registered
[ 0.230668] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.230718] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
[ 0.230719] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
[ 0.230778] PCI: Using configuration type 1 for base access
[ 0.244674] ACPI: Added _OSI(Module Device)
[ 0.244676] ACPI: Added _OSI(Processor Device)
[ 0.244677] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.244678] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.246723] ACPI : EC: EC description table is found, configuring boot EC
[ 0.248536] ACPI: Executed 2 blocks of module-level executable AML code
[ 0.334600] ACPI: Dynamic OEM Table Load:
[ 0.334606] ACPI: SSDT 0xFFFF8804180FB800 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20051117)
[ 0.348067] ACPI: Dynamic OEM Table Load:
[ 0.348072] ACPI: SSDT 0xFFFF880418179000 0005AA (v01 PmRef ApIst 00003000 INTL 20051117)
[ 0.361297] ACPI: Dynamic OEM Table Load:
[ 0.361301] ACPI: SSDT 0xFFFF880418146000 000119 (v01 PmRef ApCst 00003000 INTL 20051117)
[ 0.375728] ACPI: Interpreter enabled
[ 0.375735] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
[ 0.375740] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
[ 0.375753] ACPI: (supports S0 S3 S4 S5)
[ 0.375754] ACPI: Using IOAPIC for interrupt routing
[ 0.375770] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.394125] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.394128] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.394139] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.394141] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.394992] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.394995] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
[ 0.395340] acpi PNP0A08:00: _OSC: OS now controls [PCIeHotplug PME AER PCIeCapability]
[ 0.395683] PCI host bridge to bus 0000:00
[ 0.395685] pci_bus 0000:00: root bus resource [bus 00-3e]
[ 0.395687] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.395688] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.395689] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.395690] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
[ 0.395691] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
[ 0.395692] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
[ 0.395693] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
[ 0.395694] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
[ 0.395695] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.395695] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
[ 0.395696] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
[ 0.395697] pci_bus 0000:00: root bus resource [mem 0xcfe00000-0xfeafffff]
[ 0.395703] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
[ 0.395762] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
[ 0.395788] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.395822] pci 0000:00:01.0: System wakeup disabled by ACPI
[ 0.395851] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
[ 0.395858] pci 0000:00:02.0: reg 0x10: [mem 0xf7400000-0xf77fffff 64bit]
[ 0.395863] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.395866] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
[ 0.395919] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
[ 0.395925] pci 0000:00:03.0: reg 0x10: [mem 0xf7a14000-0xf7a17fff 64bit]
[ 0.396003] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
[ 0.396019] pci 0000:00:14.0: reg 0x10: [mem 0xf7a00000-0xf7a0ffff 64bit]
[ 0.396072] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.396098] pci 0000:00:14.0: System wakeup disabled by ACPI
[ 0.396124] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
[ 0.396141] pci 0000:00:16.0: reg 0x10: [mem 0xf7a1e000-0xf7a1e00f 64bit]
[ 0.396197] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.396257] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
[ 0.396275] pci 0000:00:1a.0: reg 0x10: [mem 0xf7a1c000-0xf7a1c3ff]
[ 0.396354] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.396391] pci 0000:00:1a.0: System wakeup disabled by ACPI
[ 0.396419] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
[ 0.396433] pci 0000:00:1b.0: reg 0x10: [mem 0xf7a10000-0xf7a13fff 64bit]
[ 0.396494] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.396522] pci 0000:00:1b.0: System wakeup disabled by ACPI
[ 0.396546] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
[ 0.396605] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.396635] pci 0000:00:1c.0: System wakeup disabled by ACPI
[ 0.396660] pci 0000:00:1c.1: [8086:8c12] type 01 class 0x060400
[ 0.396719] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.396770] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
[ 0.396829] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.396859] pci 0000:00:1c.2: System wakeup disabled by ACPI
[ 0.396883] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
[ 0.396942] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.396971] pci 0000:00:1c.3: System wakeup disabled by ACPI
[ 0.397004] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
[ 0.397022] pci 0000:00:1d.0: reg 0x10: [mem 0xf7a1b000-0xf7a1b3ff]
[ 0.397101] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.397138] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.397167] pci 0000:00:1f.0: [8086:8c49] type 00 class 0x060100
[ 0.397304] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
[ 0.397317] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
[ 0.397324] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
[ 0.397330] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
[ 0.397337] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
[ 0.397343] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
[ 0.397349] pci 0000:00:1f.2: reg 0x24: [mem 0xf7a1a000-0xf7a1a7ff]
[ 0.397382] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.397428] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
[ 0.397440] pci 0000:00:1f.3: reg 0x10: [mem 0xf7a19000-0xf7a190ff 64bit]
[ 0.397458] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
[ 0.397546] pci 0000:01:00.0: [10de:0fe4] type 00 class 0x030200
[ 0.397553] pci 0000:01:00.0: reg 0x10: [mem 0xf6000000-0xf6ffffff]
[ 0.397559] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.397566] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
[ 0.397570] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
[ 0.397575] pci 0000:01:00.0: reg 0x30: [mem 0xf7000000-0xf707ffff pref]
[ 0.397610] pci 0000:01:00.0: System wakeup disabled by ACPI
[ 0.401292] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.401294] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.401297] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.401300] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.401365] acpiphp: Slot [1] registered
[ 0.401370] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.401445] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.401529] pci 0000:04:00.0: [168c:0032] type 00 class 0x028000
[ 0.401555] pci 0000:04:00.0: reg 0x10: [mem 0xf7900000-0xf797ffff 64bit]
[ 0.401608] pci 0000:04:00.0: reg 0x30: [mem 0xf7980000-0xf798ffff pref]
[ 0.401677] pci 0000:04:00.0: supports D1 D2
[ 0.401678] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.401705] pci 0000:04:00.0: System wakeup disabled by ACPI
[ 0.407973] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.407979] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.408064] pci 0000:05:00.0: [10ec:8168] type 00 class 0x020000
[ 0.408083] pci 0000:05:00.0: reg 0x10: [io 0xd000-0xd0ff]
[ 0.408112] pci 0000:05:00.0: reg 0x18: [mem 0xf7800000-0xf7800fff 64bit]
[ 0.408130] pci 0000:05:00.0: reg 0x20: [mem 0xf2100000-0xf2103fff 64bit pref]
[ 0.408223] pci 0000:05:00.0: supports D1 D2
[ 0.408224] pci 0000:05:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408257] pci 0000:05:00.0: System wakeup disabled by ACPI
[ 0.414653] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.414656] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.414660] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.414665] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.414691] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
[ 0.415376] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 11 12) *0, disabled.
[ 0.415417] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415456] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415494] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415531] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415568] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415605] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415643] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 12) *0, disabled.
[ 0.415672] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.415675] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.415871] ACPI: Enabled 5 GPEs in block 00 to 3F
[ 0.415938] ACPI : EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.416020] vgaarb: setting as boot device: PCI:0000:00:02.0
[ 0.416022] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.416025] vgaarb: loaded
[ 0.416026] vgaarb: bridge control possible 0000:00:02.0
[ 0.416090] PCI: Using ACPI for IRQ routing
[ 0.417339] PCI: pci_cache_line_size set to 64 bytes
[ 0.417394] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
[ 0.417395] e820: reserve RAM buffer [mem 0x0009e000-0x0009ffff]
[ 0.417395] e820: reserve RAM buffer [mem 0xb9bbc000-0xbbffffff]
[ 0.417396] e820: reserve RAM buffer [mem 0xba3fb000-0xbbffffff]
[ 0.417397] e820: reserve RAM buffer [mem 0xc98eb000-0xcbffffff]
[ 0.417398] e820: reserve RAM buffer [mem 0xc9e26000-0xcbffffff]
[ 0.417399] e820: reserve RAM buffer [mem 0xcb000000-0xcbffffff]
[ 0.417400] e820: reserve RAM buffer [mem 0x42f200000-0x42fffffff]
[ 0.417465] NetLabel: Initializing
[ 0.417466] NetLabel: domain hash size = 128
[ 0.417467] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.417474] NetLabel: unlabeled traffic allowed by default
[ 0.417493] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.417496] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.419526] Switched to clocksource hpet
[ 0.422883] pnp: PnP ACPI init
[ 0.422937] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
[ 0.422939] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.423093] system 00:01: [io 0x0680-0x069f] has been reserved
[ 0.423094] system 00:01: [io 0xffff] has been reserved
[ 0.423095] system 00:01: [io 0xffff] has been reserved
[ 0.423096] system 00:01: [io 0xffff] has been reserved
[ 0.423097] system 00:01: [io 0x1c00-0x1cfe] has been reserved
[ 0.423099] system 00:01: [io 0x1d00-0x1dfe] has been reserved
[ 0.423100] system 00:01: [io 0x1e00-0x1efe] has been reserved
[ 0.423101] system 00:01: [io 0x1f00-0x1ffe] has been reserved
[ 0.423102] system 00:01: [io 0x1800-0x18fe] could not be reserved
[ 0.423103] system 00:01: [io 0x164e-0x164f] has been reserved
[ 0.423105] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423123] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.423154] system 00:03: [io 0x1854-0x1857] has been reserved
[ 0.423155] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.423184] system 00:04: [io 0x04d0-0x04d1] has been reserved
[ 0.423186] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423206] system 00:05: [io 0x0240-0x0259] has been reserved
[ 0.423207] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423243] pnp 00:06: Plug and Play ACPI device, IDs ETD0105 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
[ 0.423267] pnp 00:07: Plug and Play ACPI device, IDs ATK3001 PNP030b (active)
[ 0.423500] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.423501] system 00:08: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.423502] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.423503] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.423505] system 00:08: [mem 0xf8000000-0xfbffffff] has been reserved
[ 0.423506] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.423507] system 00:08: [mem 0xfed90000-0xfed93fff] could not be reserved
[ 0.423508] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.423510] system 00:08: [mem 0xff000000-0xffffffff] has been reserved
[ 0.423511] system 00:08: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.423512] system 00:08: [mem 0xf7fef000-0xf7feffff] has been reserved
[ 0.423513] system 00:08: [mem 0xf7ff0000-0xf7ff0fff] has been reserved
[ 0.423515] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423558] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.423655] ACPI Error: [_OSI] Namespace lookup failure, AE_NOT_FOUND (20140724/psargs-359)
[ 0.423658] ACPI Error: Method parse/execution failed [\_SB_.BTKL._STA] (Node ffff88041e43b1e0), AE_NOT_FOUND (20140724/psparse-536)
[ 0.423737] pnp: PnP ACPI: found 10 devices
[ 0.429555] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 03] add_size 1000
[ 0.429557] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 03] add_size 200000
[ 0.429559] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff] to [bus 03] add_size 200000
[ 0.429572] pci 0000:00:1c.1: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.429573] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.429574] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.429578] pci 0000:00:1c.1: BAR 14: assigned [mem 0xcfe00000-0xcfffffff]
[ 0.429584] pci 0000:00:1c.1: BAR 15: assigned [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.429585] pci 0000:00:1c.1: BAR 13: assigned [io 0x2000-0x2fff]
[ 0.429587] pci 0000:00:01.0: PCI bridge to [bus 01]
[ 0.429588] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
[ 0.429591] pci 0000:00:01.0: bridge window [mem 0xf6000000-0xf70fffff]
[ 0.429592] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.429595] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.429604] pci 0000:00:1c.1: PCI bridge to [bus 03]
[ 0.429606] pci 0000:00:1c.1: bridge window [io 0x2000-0x2fff]
[ 0.429610] pci 0000:00:1c.1: bridge window [mem 0xcfe00000-0xcfffffff]
[ 0.429614] pci 0000:00:1c.1: bridge window [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.429618] pci 0000:00:1c.2: PCI bridge to [bus 04]
[ 0.429622] pci 0000:00:1c.2: bridge window [mem 0xf7900000-0xf79fffff]
[ 0.429629] pci 0000:00:1c.3: PCI bridge to [bus 05]
[ 0.429631] pci 0000:00:1c.3: bridge window [io 0xd000-0xdfff]
[ 0.429635] pci 0000:00:1c.3: bridge window [mem 0xf7800000-0xf78fffff]
[ 0.429639] pci 0000:00:1c.3: bridge window [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.429644] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.429645] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.429646] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.429647] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.429648] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.429649] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.429650] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
[ 0.429651] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
[ 0.429652] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
[ 0.429653] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
[ 0.429654] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
[ 0.429655] pci_bus 0000:00: resource 15 [mem 0xcfe00000-0xfeafffff]
[ 0.429656] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
[ 0.429657] pci_bus 0000:01: resource 1 [mem 0xf6000000-0xf70fffff]
[ 0.429659] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
[ 0.429660] pci_bus 0000:03: resource 0 [io 0x2000-0x2fff]
[ 0.429661] pci_bus 0000:03: resource 1 [mem 0xcfe00000-0xcfffffff]
[ 0.429662] pci_bus 0000:03: resource 2 [mem 0xf2200000-0xf23fffff 64bit pref]
[ 0.429663] pci_bus 0000:04: resource 1 [mem 0xf7900000-0xf79fffff]
[ 0.429664] pci_bus 0000:05: resource 0 [io 0xd000-0xdfff]
[ 0.429665] pci_bus 0000:05: resource 1 [mem 0xf7800000-0xf78fffff]
[ 0.429666] pci_bus 0000:05: resource 2 [mem 0xf2100000-0xf21fffff 64bit pref]
[ 0.429683] NET: Registered protocol family 2
[ 0.429836] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.429977] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.430077] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.430088] TCP: reno registered
[ 0.430101] UDP hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.430138] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
[ 0.430194] NET: Registered protocol family 1
[ 0.430204] pci 0000:00:02.0: Video device with shadowed ROM
[ 0.430531] PCI: CLS 64 bytes, default 64
[ 0.430562] Unpacking initramfs...
[ 0.469892] Freeing initrd memory: 3964K (ffff880037832000 - ffff880037c11000)
[ 0.469905] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.469907] software IO TLB [mem 0xc309a000-0xc709a000] (64MB) mapped at [ffff8800c309a000-ffff8800c7099fff]
[ 0.470107] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
[ 0.470140] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470145] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470152] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470157] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470163] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470168] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470173] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470178] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x1c
[ 0.470208] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 0.470225] Scanning for low memory corruption every 60 seconds
[ 0.470411] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.470425] Initialise system trusted keyring
[ 0.470652] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.471462] zpool: loaded
[ 0.471463] zbud: loaded
[ 0.471577] VFS: Disk quotas dquot_6.5.2
[ 0.471598] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.471674] msgmni has been set to 31868
[ 0.471710] Key type big_key registered
[ 0.471832] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.471874] io scheduler noop registered
[ 0.471875] io scheduler deadline registered
[ 0.471892] io scheduler cfq registered (default)
[ 0.471993] pcieport 0000:00:01.0: irq 26 for MSI/MSI-X
[ 0.472084] pcieport 0000:00:1c.0: irq 27 for MSI/MSI-X
[ 0.472180] pcieport 0000:00:1c.1: irq 28 for MSI/MSI-X
[ 0.472279] pcieport 0000:00:1c.2: irq 29 for MSI/MSI-X
[ 0.472374] pcieport 0000:00:1c.3: irq 30 for MSI/MSI-X
[ 0.472437] pcieport 0000:00:01.0: Signaling PME through PCIe PME interrupt
[ 0.472438] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
[ 0.472439] pcie_pme 0000:00:01.0:pcie01: service driver pcie_pme loaded
[ 0.472451] pcieport 0000:00:1c.0: Signaling PME through PCIe PME interrupt
[ 0.472454] pcie_pme 0000:00:1c.0:pcie01: service driver pcie_pme loaded
[ 0.472465] pcieport 0000:00:1c.1: Signaling PME through PCIe PME interrupt
[ 0.472468] pcie_pme 0000:00:1c.1:pcie01: service driver pcie_pme loaded
[ 0.472479] pcieport 0000:00:1c.2: Signaling PME through PCIe PME interrupt
[ 0.472480] pci 0000:04:00.0: Signaling PME through PCIe PME interrupt
[ 0.472483] pcie_pme 0000:00:1c.2:pcie01: service driver pcie_pme loaded
[ 0.472494] pcieport 0000:00:1c.3: Signaling PME through PCIe PME interrupt
[ 0.472495] pci 0000:05:00.0: Signaling PME through PCIe PME interrupt
[ 0.472498] pcie_pme 0000:00:1c.3:pcie01: service driver pcie_pme loaded
[ 0.472508] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.472537] pciehp 0000:00:1c.1:pcie04: Slot #1 AttnBtn- AttnInd- PwrInd- PwrCtrl- MRL- Interlock- NoCompl+ LLActRep+
[ 0.472563] pciehp 0000:00:1c.1:pcie04: service driver pciehp loaded
[ 0.472565] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.472587] efifb: probing for efifb
[ 0.472602] efifb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 8128k, total 8128k
[ 0.472603] efifb: mode is 1920x1080x32, linelength=7680, pages=1
[ 0.472603] efifb: scrolling: redraw
[ 0.472604] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.475552] Console: switching to colour frame buffer device 240x67
[ 0.478798] fb0: EFI VGA frame buffer device
[ 0.478804] intel_idle: MWAIT substates: 0x42120
[ 0.478805] intel_idle: v0.4 model 0x3C
[ 0.478805] intel_idle: lapic_timer_reliable_states 0xffffffff
[ 0.479023] GHES: HEST is not enabled!
[ 0.479072] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.479377] Linux agpgart interface v0.103
[ 0.479427] rtc_cmos 00:02: RTC can wake from S4
[ 0.479529] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 0.479555] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.479563] Intel P-state driver initializing.
[ 0.479725] ledtrig-cpu: registered to indicate activity on CPUs
[ 0.479981] TCP: cubic registered
[ 0.480204] NET: Registered protocol family 10
[ 0.480721] NET: Registered protocol family 17
[ 0.481506] Loading compiled-in X.509 certificates
[ 0.481536] registered taskstats version 1
[ 0.482885] Magic number: 6:238:950
[ 0.482926] tty tty7: hash matches
[ 0.482995] cpu cpu5: hash matches
[ 0.483018] memory memory3: hash matches
[ 0.483093] rtc_cmos 00:02: setting system clock to 2014-11-04 19:54:52 UTC (1415130892)
[ 0.483290] PM: Hibernation image not present or could not be loaded.
[ 0.485249] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
[ 0.485252] Write protecting the kernel read-only data: 8192k
[ 0.489838] Freeing unused kernel memory: 752K (ffff880002544000 - ffff880002600000)
[ 0.491668] Freeing unused kernel memory: 336K (ffff8800027ac000 - ffff880002800000)
[ 0.504803] random: systemd-tmpfile urandom read with 1 bits of entropy available
[ 0.507092] systemd-udevd[77]: starting version 216
[ 0.524055] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.527632] i8042: Detected active multiplexing controller, rev 1.1
[ 0.529011] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.529023] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 0.529025] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 0.529027] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 0.529028] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 0.530334] ACPI: bus type USB registered
[ 0.530352] usbcore: registered new interface driver usbfs
[ 0.530360] usbcore: registered new interface driver hub
[ 0.530397] usbcore: registered new device driver usb
[ 0.530948] SCSI subsystem initialized
[ 0.530969] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.531185] ehci-pci: EHCI PCI platform driver
[ 0.531330] ehci-pci 0000:00:1a.0: EHCI Host Controller
[ 0.531336] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 0.531347] ehci-pci 0000:00:1a.0: debug port 2
[ 0.531967] libata version 3.00 loaded.
[ 0.535264] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
[ 0.535282] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf7a1c000
[ 0.542977] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 0.543147] hub 1-0:1.0: USB hub found
[ 0.543153] hub 1-0:1.0: 2 ports detected
[ 0.543377] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 0.543382] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.543393] ehci-pci 0000:00:1d.0: debug port 2
[ 0.547295] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
[ 0.547305] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7a1b000
[ 0.556323] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 0.556509] hub 2-0:1.0: USB hub found
[ 0.556514] hub 2-0:1.0: 2 ports detected
[ 0.556739] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.556747] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 0.556840] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 0.556860] xhci_hcd 0000:00:14.0: irq 31 for MSI/MSI-X
[ 0.557073] hub 3-0:1.0: USB hub found
[ 0.557091] hub 3-0:1.0: 14 ports detected
[ 0.559496] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 0.559498] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 0.559706] hub 4-0:1.0: USB hub found
[ 0.559716] hub 4-0:1.0: 4 ports detected
[ 0.560402] ahci 0000:00:1f.2: version 3.0
[ 0.560543] ahci 0000:00:1f.2: irq 32 for MSI/MSI-X
[ 0.560575] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x14 impl SATA mode
[ 0.560577] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
[ 0.566854] scsi host0: ahci
[ 0.567019] scsi host1: ahci
[ 0.567141] scsi host2: ahci
[ 0.567252] scsi host3: ahci
[ 0.567341] scsi host4: ahci
[ 0.567374] ata1: DUMMY
[ 0.567375] ata2: DUMMY
[ 0.567378] ata3: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a200 irq 32
[ 0.567379] ata4: DUMMY
[ 0.567381] ata5: SATA max UDMA/133 abar m2048@0xf7a1a000 port 0xf7a1a300 irq 32
[ 0.583513] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.849986] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 0.886643] ata5: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 0.886662] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 0.888182] ata3.00: ATAPI: MATSHITADVD-RAM UJ8C2 S, 1.00, max UDMA/133
[ 0.889544] ata3.00: configured for UDMA/133
[ 0.890893] scsi 2:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8C2 S 1.00 PQ: 0 ANSI: 5
[ 0.893237] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.893255] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.893257] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.899594] ata5.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR20002, max UDMA/133
[ 0.899597] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 0.906204] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
[ 0.906208] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
[ 0.906210] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
[ 0.912602] ata5.00: configured for UDMA/133
[ 0.912727] scsi 4:0:0:0: Direct-Access ATA ST1000LM024 HN-M 0002 PQ: 0 ANSI: 5
[ 0.925609] sr 2:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 0.925611] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 0.925730] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 0.925834] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 0.925837] sd 4:0:0:0: [sda] 4096-byte physical blocks
[ 0.925856] sd 4:0:0:0: [sda] Write Protect is off
[ 0.925858] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 0.925869] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 0.973953] hub 1-1:1.0: USB hub found
[ 0.974048] hub 1-1:1.0: 6 ports detected
[ 0.984057] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
[ 0.984721] sd 4:0:0:0: [sda] Attached SCSI disk
[ 1.080102] usb 2-1: new high-speed USB device number 2 using ehci-pci
[ 1.204162] hub 2-1:1.0: USB hub found
[ 1.204272] hub 2-1:1.0: 8 ports detected
[ 1.363749] usb 3-3: new full-speed USB device number 2 using xhci_hcd
[ 1.473732] tsc: Refined TSC clocksource calibration: 2394.455 MHz
[ 1.541050] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.544660] usbcore: registered new interface driver usbhid
[ 1.544662] usbhid: USB HID core driver
[ 1.545882] logitech-djreceiver 0003:046D:C52B.0003: hiddev0,hidraw0: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:14.0-3/input2
[ 1.598252] input: Logitech Unifying Device. Wireless PID:1025 as /devices/pci0000:00/0000:00:14.0/usb3/3-3/3-3:1.2/0003:046D:C52B.0003/0003:046D:C52B.0004/input/input5
[ 1.598295] logitech-djdevice 0003:046D:C52B.0004: input,hidraw1: USB HID v1.11 Mouse [Logitech Unifying Device. Wireless PID:1025] on usb-0000:00:14.0-3:1
[ 1.697277] usb 3-5: new full-speed USB device number 3 using xhci_hcd
[ 2.030900] usb 3-7: new high-speed USB device number 4 using xhci_hcd
[ 2.106192] random: nonblocking pool is initialized
[ 2.142430] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
[ 2.467952] usb 3-8: new high-speed USB device number 5 using xhci_hcd
[ 2.474803] Switched to clocksource tsc
[ 2.801571] usb 3-10: new full-speed USB device number 6 using xhci_hcd
[ 2.976444] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 4.590179] systemd-readahead[174]: Bumped block_nr parameter of 8:0 to 20480. This is a temporary hack and should be removed one day.
[ 4.909080] EXT4-fs (sda8): re-mounted. Opts: data=ordered
[ 5.079193] usb 3-10: USB disconnect, device number 6
[ 5.364273] vboxdrv: Found 8 processor cores.
[ 5.364722] vboxdrv: fAsync=0 offMin=0x1a7 offMax=0x8e8f
[ 5.364769] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 5.364770] vboxdrv: Successfully loaded version 4.3.18_OSE (interface 0x001a0008).
[ 5.386896] usb 3-10: new full-speed USB device number 7 using xhci_hcd
[ 5.485195] systemd-udevd[207]: starting version 216
[ 5.562316] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 5.696307] vboxpci: IOMMU not found (not registered)
[ 7.665644] usb 3-10: USB disconnect, device number 7
[ 7.975717] usb 3-10: new full-speed USB device number 8 using xhci_hcd
[ 8.150721] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 8.524128] wmi: Mapper loaded
[ 8.880804] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input6
[ 8.882110] ACPI: Lid Switch [LID]
[ 8.882160] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input7
[ 8.882163] ACPI: Sleep Button [SLPB]
[ 8.882302] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input8
[ 8.882304] ACPI: Power Button [PWRF]
[ 8.925656] ACPI: AC Adapter [AC0] (off-line)
[ 8.945894] ACPI: Battery Slot [BAT0] (battery present)
[ 9.120666] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 9.121374] thermal LNXTHERM:00: registered as thermal_zone0
[ 9.121376] ACPI: Thermal Zone [THRM] (49 C)
[ 9.279861] EDAC MC: Ver: 3.0.0
[ 9.311386] rtc-efi rtc-efi: rtc core: registered rtc-efi as rtc1
[ 9.339936] input: PC Speaker as /devices/platform/pcspkr/input/input9
[ 9.514276] EDAC ie31200: No ECC support
[ 9.527077] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\SMB0) (20140724/utaddress-258)
[ 9.527083] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
[ 9.527086] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 9.571525] mei_me 0000:00:16.0: irq 33 for MSI/MSI-X
[ 9.977435] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 9.977442] r8169 0000:05:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 9.984309] r8169 0000:05:00.0: irq 34 for MSI/MSI-X
[ 9.984487] r8169 0000:05:00.0 eth0: RTL8168g/8111g at 0xffffc900018d8000, ac:22:0b:02:e5:73, XID 0c000800 IRQ 34
[ 9.984489] r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 10.233442] iTCO_vendor_support: vendor-support=0
[ 10.254345] usb 3-10: USB disconnect, device number 8
[ 10.304926] r8169 0000:05:00.0 enp5s0: renamed from eth0
[ 10.328363] systemd-udevd[241]: renamed network interface eth0 to enp5s0
[ 10.328555] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
[ 10.328584] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
[ 10.328676] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 10.501711] cfg80211: Calling CRDA to update world regulatory domain
[ 10.536029] psmouse serio4: elantech: assuming hardware version 4 (with firmware version 0x361f03)
[ 10.551690] psmouse serio4: elantech: Synaptics capabilities query result 0x10, 0x14, 0x0e.
[ 10.564444] usb 3-10: new full-speed USB device number 9 using xhci_hcd
[ 10.627348] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio4/input/input13
[ 10.739506] usb 3-10: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 10.842138] asus_wmi: ASUS WMI generic driver loaded
[ 10.842217] snd_hda_intel 0000:00:1b.0: Applying patch firmware 'alsa/n550-bass'
[ 10.861070] AVX2 version of gcm_enc/dec engaged.
[ 10.888780] mousedev: PS/2 mouse device common for all mice
[ 11.001716] snd_hda_intel 0000:00:1b.0: irq 35 for MSI/MSI-X
[ 11.012548] sound hdaudioC1D0: autoconfig: line_outs=2 (0x14/0x1a/0x0/0x0/0x0) type:speaker
[ 11.012550] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.012551] sound hdaudioC1D0: hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 11.012552] sound hdaudioC1D0: mono: mono_out=0x0
[ 11.012553] sound hdaudioC1D0: inputs:
[ 11.012554] sound hdaudioC1D0: Mic=0x1b
[ 11.012556] sound hdaudioC1D0: Internal Mic=0x12
[ 11.019145] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input14
[ 11.019195] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
[ 11.453185] [drm] Initialized drm 1.1.0 20060810
[ 11.463616] asus_wmi: Initialization: 0x1
[ 11.463642] asus_wmi: BIOS WMI version: 7.9
[ 11.463673] asus_wmi: SFUN value: 0x6a0877
[ 11.464347] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input16
[ 11.471973] asus_wmi: Backlight controlled by ACPI video driver
[ 11.645480] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb3/3-10/3-10:1.0/0003:04F3:010C.0008/input/input17
[ 11.645667] hid-multitouch 0003:04F3:010C.0008: input,hiddev0,hidraw2: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-10/input0
[ 11.736055] [drm] Memory usable by graphics device = 2048M
[ 11.736057] [drm] Replacing VGA console driver
[ 11.736059] checking generic (d0000000 7f0000) vs hw (d0000000 10000000)
[ 11.736060] fb: switching to inteldrmfb from EFI VGA
[ 11.736083] Console: switching to colour dummy device 80x25
[ 11.755427] i915 0000:00:02.0: irq 36 for MSI/MSI-X
[ 11.755436] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 11.755437] [drm] Driver supports precise vblank timestamp query.
[ 11.755455] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.792893] [drm] VBT doesn't support DRRS
[ 11.922147] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
[ 11.936510] fbcon: inteldrmfb (fb0) is primary device
[ 11.982666] Bluetooth: Core ver 2.19
[ 11.982675] NET: Registered protocol family 31
[ 11.982675] Bluetooth: HCI device and connection manager initialized
[ 11.982679] Bluetooth: HCI socket layer initialized
[ 11.982680] Bluetooth: L2CAP socket layer initialized
[ 11.982683] Bluetooth: SCO socket layer initialized
[ 12.006298] usbcore: registered new interface driver rtsx_usb
[ 12.040642] ath: phy0: Set parameters for CUS198
[ 12.040642] ath: phy0: Set BT/WLAN RX diversity capability
[ 12.046590] ath: phy0: Enable LNA combining
[ 12.047749] ath: EEPROM regdomain: 0x60
[ 12.047750] ath: EEPROM indicates we should expect a direct regpair map
[ 12.047750] ath: Country alpha2 being used: 00
[ 12.047751] ath: Regpair used: 0x60
[ 12.049373] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 12.049594] ieee80211 phy0: Atheros AR9485 Rev:1 mem=0xffffc90005d00000, irq=18
[ 12.145834] usbcore: registered new interface driver btusb
[ 12.155846] MXM: GUID detected in BIOS
[ 12.155922] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 12.155973] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140724/nsarguments-95)
[ 12.156192] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power,
[ 12.156193] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
[ 12.598418] ath9k 0000:04:00.0 wlp4s0: renamed from wlan0
[ 12.620359] media: Linux media interface: v0.10
[ 12.626127] systemd-udevd[232]: renamed network interface wlan0 to wlp4s0
[ 12.699457] Linux video capture interface: v2.00
[ 12.843252] usb 3-10: USB disconnect, device number 9
[ 13.003038] Console: switching to colour frame buffer device 240x67
[ 13.006511] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 13.006513] i915 0000:00:02.0: registered panic notifier
[ 13.015741] intel_rapl: Found RAPL domain package
[ 13.015746] intel_rapl: Found RAPL domain core
[ 13.015748] intel_rapl: Found RAPL domain uncore
[ 13.015751] intel_rapl: Found RAPL domain dram
[ 13.016857] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 13.045017] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 1I have figured out how to solve part of the problem. It was completely Xorg related, as you can see from the Xorg.0.log. I removed nouveau and installed Nvidia proprietary driver, in this way X doesn't timeout anymore but now I still have a problem with the time it takes X to start up. As you can see from these lines:
[ 20.141] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 20.141] (II) Loader magic: 0x818d80
[ 20.141] (II) Module ABI versions:
[ 20.141] X.Org ANSI C Emulation: 0.4
[ 20.141] X.Org Video Driver: 18.0
[ 20.141] X.Org XInput driver : 21.0
[ 20.141] X.Org Server Extension : 8.0
[ 44.585] (EE) systemd-logind: failed to get session: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[ 44.585] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 44.586] (--) PCI:*(0:0:2:0) 8086:0416:1043:11cd rev 6, Mem @ 0xf7400000/4194304, 0xd0000000/268435456, I/O @ 0x0000f000/64
[ 44.586] (--) PCI: (0:1:0:0) 10de:0fe4:1043:11cd rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/268435456, 0xf0000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
[ 44.586] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 44.586] (II) LoadModule: "glx"
There is quite a jump in the timestamps just where an error related with logind occurs. Is it normal or I have a problem? BTW, Xorg doesn't timeout anymore it seems.
Is there anyone who can help me? Maybe I have simply posted in the wrong section of the forum?
Last edited by Aliverix (2014-11-06 22:47:24) -
[solved] No sound with ALC269VB on asus 1215b EeePC
Hello,
I've just finished the basic install on a Asus Eee PC 1215B (with an APU C-50) and I'm having problems to make the sound work. I've googled around without succes...
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
# cat /proc/asound/card1/pcm0p/info
card: 1
device: 0
subdevice: 0
stream: PLAYBACK
id: ALC269VB Analog
name: ALC269VB Analog
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
# cat /etc/modprobe.d/modprobe.conf
blacklist radeon
option snd-hda-intel mode=auto
I've runned alsaconf and rebooted several times and nothing helped...
When I run alsamixer, the default chip that appears is ATI R6xx HDMI, with only S/PDIF channel, when I change card to HDA ATI SB (chip Realtek ALC269VB) it appears the usual channels the change volume. Only mic is muted, the I run speaker-test:
# speaker-test -c 1
speaker-test 1.0.24.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
I dont have ideas to solve this...
Could someone help me??
Gratefull,
Heitor.
Last edited by heitorpb (2012-01-22 20:00:19)New try. Check IDs with:
cat /proc/asound/card0/id
cat /proc/asound/card1/id
Then do something like
options snd-hda-intel id=SB,HDMI index=0,1
using the IDs you got with the commands above.
As for .asoundrc, I've seen one recently, but can't remember where. Edit - Found it:
pcm.!default {
type hw
card SB
ctl.!default {
type hw
card SB
However this will only play one sound at a time. Check here if you want to play around with this stuff: http://alsa.opensrc.org/FAQ026. Hopefully you won't need to.
Last edited by Gusar (2012-01-22 20:02:39) -
[SOLVED] No sound with Asus Xonar DGX
I've got no sound so I've looked into journalctl and there were some bluez and pulseaudio related erros. So i.a.w. this topic https://bbs.archlinux.org/viewtopic.php?id=155714 I did `systemctl enable bluetooth.service`. No more errors but still no sound.
Other things I did:
- unplug/plug headphones
- check whether anything is muted in alsamixer and the gnome sound applet (note: nothing is greyed-out, microphone picks up signals)
snd_oxygen i.e. ASUS XONAR is the sound card I would like to use and I hook my headphones to.
# cat /proc/asound/cards
0 [DGX ]: CMI8786 - Xonar DGX
C-Media Oxygen HD Audio at 0xee00, irq 17
1 [HDMI ]: HDA-Intel - HDA ATI HDMI
HDA ATI HDMI at 0xfd7fc000 irq 30
# lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 49263 1
snd_hda_intel 26387 2
snd_hda_controller 26857 1 snd_hda_intel
snd_oxygen 23783 2
snd_hda_codec 112621 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
snd_oxygen_lib 36709 1 snd_oxygen
snd_hwdep 17244 1 snd_hda_codec
snd_mpu401_uart 13507 1 snd_oxygen_lib
snd_rawmidi 26806 1 snd_mpu401_uart
snd_seq_device 13307 1 snd_rawmidi
snd_pcm 88779 5 snd_hda_codec_hdmi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 19 snd_oxygen,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_mpu401_uart,snd_seq_device
# journalctl -b | grep -i bluez
Apr 26 12:13:52 arch1411 dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
Apr 26 12:13:52 arch1411 dbus[326]: [system] Successfully activated service 'org.bluez'
Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Activating service name='org.bluez.obex'
Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Successfully activated service 'org.bluez.obex'
[root@arch1411 hg1]# journalctl -b | grep -i audio
Apr 26 12:13:50 arch1411 kernel: snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 431 of process 431 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 456 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 497 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 498 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
Apr 26 15:37:00 arch1411 vlc.desktop[876]: [00007ffabc009ee8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
Apr 26 15:37:02 arch1411 vlc.desktop[876]: [00007ffae0c244f8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
# systemctl status pulseaudio.service
● pulseaudio.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
# systemctl start pulseaudio.service
Failed to start pulseaudio.service: Unit pulseaudio.service failed to load: No such file or directory.
Should I proceed per https://bbs.archlinux.org/viewtopic.php?id=149501 and remove pulseaudio daemon from the /etc/rc.conf file?
Last edited by bbarcher (2015-05-01 07:42:36)systemctl --all --no-pager|grep -i pulse
returns nothing.
Thank you for your input, V1del.
$ pacmd list-cards
2 card(s) available.
index: 0
name: <alsa_card.pci-0000_01_00.1>
driver: <module-alsa-card.c>
owner module: 6
properties:
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa88"
device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
device.string = "0"
device.description = "Barts HDMI Audio [Radeon HD 6800 Series]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:hdmi-stereo>
sinks:
alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
sources:
alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
index: 1
name: <alsa_card.pci-0000_04_04.0>
driver: <module-alsa-card.c>
owner module: 24
properties:
alsa.card = "1"
alsa.card_name = "Xonar DGX"
alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
alsa.driver_name = "snd_oxygen"
device.bus_path = "pci-0000:04:04.0"
sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
device.bus = "pci"
device.vendor.id = "13f6"
device.vendor.name = "C-Media Electronics Inc"
device.product.id = "8788"
device.product.name = "CMI8788 [Oxygen HD Audio]"
device.string = "1"
device.description = "CMI8788 [Oxygen HD Audio]"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
profiles:
input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
off: Off (priority 0, available: unknown)
active profile: <output:analog-stereo+input:analog-stereo>
sinks:
alsa_output.pci-0000_04_04.0.analog-stereo/#1: CMI8788 [Oxygen HD Audio] Analog Stereo
sources:
alsa_output.pci-0000_04_04.0.analog-stereo.monitor/#1: Monitor of CMI8788 [Oxygen HD Audio] Analog Stereo
alsa_input.pci-0000_04_04.0.analog-stereo/#2: CMI8788 [Oxygen HD Audio] Analog Stereo
ports:
analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-input-microphone"
analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: unknown)
properties:
analog-input-aux: Analog Input (priority 8000, latency offset 0 usec, available: unknown)
properties:
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-headphones"
$ pacmd list-sinks
2 sink(s) available.
index: 0
name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9050
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 0
sample spec: s16le 2ch 44100Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
card: 0 <alsa_card.pci-0000_01_00.1>
module: 6
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "HDMI 0"
alsa.id = "HDMI 0"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "3"
alsa.card = "0"
alsa.card_name = "HDA ATI HDMI"
alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
alsa.driver_name = "snd_hda_intel"
device.bus_path = "pci-0000:01:00.1"
sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
device.bus = "pci"
device.vendor.id = "1002"
device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
device.product.id = "aa88"
device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
device.string = "hdmi:0"
device.buffering.buffer_size = "352768"
device.buffering.fragment_size = "176384"
device.access_mode = "mmap+timer"
device.profile.name = "hdmi-stereo"
device.profile.description = "Digital Stereo (HDMI)"
device.description = "Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)"
alsa.mixer_name = "ATI R6xx HDMI"
alsa.components = "HDA:1002aa01,00aa0100,00100200"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
properties:
device.icon_name = "video-display"
active port: <hdmi-output-0>
* index: 1
name: <alsa_output.pci-0000_04_04.0.analog-stereo>
driver: <module-alsa-card.c>
flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
state: SUSPENDED
suspend cause: IDLE
priority: 9059
volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
balance 0.00
base volume: 65536 / 100% / 0.00 dB
volume steps: 65537
muted: no
current latency: 0.00 ms
max request: 0 KiB
max rewind: 0 KiB
monitor source: 1
sample spec: s16le 2ch 48000Hz
channel map: front-left,front-right
Stereo
used by: 0
linked by: 0
configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
card: 1 <alsa_card.pci-0000_04_04.0>
module: 24
properties:
alsa.resolution_bits = "16"
device.api = "alsa"
device.class = "sound"
alsa.class = "generic"
alsa.subclass = "generic-mix"
alsa.name = "Multichannel"
alsa.id = "Multichannel"
alsa.subdevice = "0"
alsa.subdevice_name = "subdevice #0"
alsa.device = "0"
alsa.card = "1"
alsa.card_name = "Xonar DGX"
alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
alsa.driver_name = "snd_oxygen"
device.bus_path = "pci-0000:04:04.0"
sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
device.bus = "pci"
device.vendor.id = "13f6"
device.vendor.name = "C-Media Electronics Inc"
device.product.id = "8788"
device.product.name = "CMI8788 [Oxygen HD Audio]"
device.string = "hw:1"
device.buffering.buffer_size = "352800"
device.buffering.fragment_size = "352800"
device.access_mode = "mmap+timer"
device.profile.name = "analog-stereo"
device.profile.description = "Analog Stereo"
device.description = "CMI8788 [Oxygen HD Audio] Analog Stereo"
alsa.mixer_name = "CMI8786"
alsa.components = "CS4245 CMI8786"
module-udev-detect.discovered = "1"
device.icon_name = "audio-card-pci"
ports:
analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
properties:
device.icon_name = "audio-headphones"
active port: <analog-output-headphones>
After all of the recommended solutions from the wiki I still get
$ systemctl status pulseaudio.service
● pulseaudio.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
$ pulseaudio -vvvv
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 6.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
D: [pulseaudio] main.c: Found 6 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is d36c9fa4b78f4c8cae7f7ad7897683e3.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
I: [pulseaudio] main.c: Using state directory /home/hg1/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
E: [pulseaudio] pid.c: Daemon already running.
E: [pulseaudio] main.c: pa_pid_file_create() failed.
Last edited by bbarcher (2015-04-27 19:16:41) -
[SOLVED] No sound in Flash Plugins - Xonar D2X
There is no sound at all when I play any flash content, but my sound works for other applications no problem.
I'm running Google Chrome's built-in flash plugin
I'm running Pulse Audio with ALSA. I have installed pulseaudio and pulseaudio-alsa
I'm using Google Chrome's stable version from the AUR: google-chrome
My system is 64-bit
The Pulse Audio server is running fine
My sound card is an Asus Xonar D2X
I have the following kernel modules loaded that are associated with sound:
lsmod output
snd_virtuoso 33542 2
snd_oxygen_lib 29893 1 snd_virtuoso
snd_mpu401_uart 5827 1 snd_oxygen_lib
snd_rawmidi 18710 1 snd_mpu401_uart
snd_seq_device 5188 1 snd_rawmidi
snd_pcm 77645 1 snd_oxygen_lib
snd_page_alloc 7242 1 snd_pcm
snd_timer 18726 1 snd_pcm
snd 59109 11 snd_timer,snd_pcm,snd_rawmidi,snd_virtuoso,snd_oxygen_lib,snd_mpu401_uart,snd_seq_device
soundcore 5450 1 snd
Here is a list of my active sound devices if of interest:
aplay -l output
**** List of PLAYBACK Hardware Devices ****
card 0: D2X [Xonar D2X], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: D2X [Xonar D2X], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
I have tried using the flash plugin in the official repositories: flashplugin .
There was no change.
I am out of ideas to attempt, what can I do to fix it?
Last edited by finalfortune (2014-02-12 10:38:48)Okay, my sound now magically works for flash. I initially had not restarted my pc after installing the above mentioned pulseaudio packages. I didn't think it necessary, not even sure if it is the restart that fixed it, but problem solved.
Though i did change my .asound.rc from
pcm.!default {
type plug
slave {
pcm "hw:0,0"
ctl.!default {
type hw
card 0
to
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
Not sure if that did anything
Last edited by finalfortune (2014-02-12 10:25:36) -
[SOLVED] No Sound - ALSA. Soundcard detected however
The new version of Alsa (1.0.20) supports my new sound card- the Asus Xonar Essence STX. I installed this version like it says on the wiki page http://www.alsa-project.org/main/index. … e-virtuoso (compiled from source)
I have no sound now. In alsamixer my Master channel is unmuted and raised but i cant hear anything (not in mplayer, not with aplay... nothing). Here are some outputs that might help you help me
[rohit@myarch ~]$ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: STX [Xonar Essence STX], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: STX [Xonar Essence STX], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
[rohit@myarch CD1]$ mplayer -ao alsa 03\ Radiohead\ -\ Nude.mp3
MPlayer dev-SVN-rUNKNOWN-4.3.3 (C) 2000-2009 MPlayer Team
CPU: Intel(R) Core(TM)2 Quad CPU Q6600 @ 2.40GHz (Family: 6, Model: 15, Stepping: 11)
CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1
Compiled with runtime CPU detection.
137 audio & 292 video codecs
mplayer: could not connect to socket
mplayer: No such file or directory
Failed to open LIRC support. You will not be able to use your remote control.
Playing 03 Radiohead - Nude.mp3.
Audio only file format detected.
==========================================================================
Opening audio decoder: [mp3lib] MPEG layer-2, layer-3
AUDIO: 44100 Hz, 2 ch, s16le, 320.0 kbit/22.68% (ratio: 40000->176400)
Selected audio codec: [mp3] afm: mp3lib (mp3lib MPEG layer-2, layer-3)
==========================================================================
AO: [alsa] 48000Hz 2ch s16le (2 bytes per sample)
Video: no video
Starting playback...
[rohit@myarch ~]$ lsmod | grep snd_pcsp
[rohit@myarch ~]$
(blank output)
[rohit@myarch ~]$ lsmod|grep '^snd'
snd_seq_oss 27872 0
snd_seq_midi_event 6004 1 snd_seq_oss
snd_seq 48368 4 snd_seq_oss,snd_seq_midi_event
snd_virtuoso 11748 2
snd_oxygen_lib 29588 1 snd_virtuoso
snd_pcm_oss 36416 0
snd_mixer_oss 14356 2 snd_pcm_oss
snd_pcm 67256 2 snd_oxygen_lib,snd_pcm_oss
snd_timer 19228 2 snd_seq,snd_pcm
snd_page_alloc 8124 1 snd_pcm
snd_mpu401_uart 6804 1 snd_oxygen_lib
snd_rawmidi 19712 1 snd_mpu401_uart
snd_seq_device 6240 3 snd_seq_oss,snd_seq,snd_rawmidi
snd 47812 13 snd_seq_oss,snd_seq,snd_virtuoso,snd_oxygen_lib,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer,snd_mpu401_uart,snd_rawmidi,snd_seq_device
[rohit@myarch ~]$ ls -l /dev/snd/
total 0
crw-rw---- 1 root audio 116, 0 2009-05-07 23:34 controlC0
crw-rw---- 1 root audio 116, 24 2009-05-07 23:34 pcmC0D0c
crw-rw---- 1 root audio 116, 16 2009-05-07 23:56 pcmC0D0p
crw-rw---- 1 root audio 116, 17 2009-05-07 23:34 pcmC0D1p
crw-rw---- 1 root audio 116, 1 2009-05-07 23:34 seq
crw-rw---- 1 root audio 116, 33 2009-05-07 23:34 timer
[AlsaMixer v1.0.20 (Press Escape to quit)]──────────────────┐
│ Card: Xonar Essence STX │
│ Chip: AV200
HELP!#
# /etc/modprobe.conf (for v2.6 kernels)
# ALSA portion
alias char-major-116 snd
alias snd-card-0 snd-virtuoso
# module options should go here
# OSS/Free portion
alias char-major-14 soundcore
alias sound-slot-0 snd-card-0
# card #1
alias sound-service-0-0 snd-mixer-oss
alias sound-service-0-1 snd-seq-oss
alias sound-service-0-3 snd-pcm-oss
alias sound-service-0-8 snd-seq-oss
alias sound-service-0-12 snd-pcm-oss
Last edited by ronandi (2009-05-08 20:20:42)windtalker wrote:I had the same prob.
I went back and muted line jac and my sound started working.
What's line jac? (or jack)? and how did you do that?
Nvm I didnt realize that I could switch on of the options to "Headphones". Solved!
Last edited by ronandi (2009-05-08 20:20:22) -
[SOLVED] No sound after fresh install
Hi
I am having a little bit of a problem that I couldn't solve myself. My sound is not working after a fresh installation of Arch. Everything else is fine but sound is not working. My "user" is in "audio" group, I tried some solution nothing smart just trying to reinstall or try to delete pulseaudio or alsa, only to find they are dependant on something. I have a Gnome 3.12. Also I am not an expert (obviously) ,but some things are still unclear to me about linux and this is not my first expiriance with Arch.
This is what I belive you need from harware list:
Motherboard: Asus P5Q PRO
Video Card: Ati Radeon 4850HD
Audio: Realtek ALC1200, 8-channel High Definition Audio CODEC (this is built in)
So enough of my rambling here are the data I think you may need for actually helping me:
This is the version I am using
pacman -Q | grep alsa
alsa-lib 1.0.28-1
alsa-oss 1.0.28-1
alsa-plugins 1.0.28-2
alsa-utils 1.0.28-1
lib32-alsa-lib 1.0.28-1
lib32-alsa-plugins 1.0.28-1
pulseaudio-alsa 2-3
zita-alsa-pcmi 0.2.0-1.
cat /proc/asound/modules
0 snd_hda_intel
1 snd_hda_intel
lsmod | grep snd
snd_hda_codec_realtek 67127 1
snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
snd_hda_codec_hdmi 45117 1
snd_hda_intel 26327 10
snd_hda_controller 26727 1 snd_hda_intel
snd_hda_codec 108552 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
snd_hwdep 17244 1 snd_hda_codec
snd_pcm 88487 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 26614 1 snd_pcm
snd 73436 28 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
soundcore 13031 2 snd,snd_hda_codec
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 1: ALC1200 Digital [ALC1200 Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 80 Oct 9 23:27 by-path
crw-rw----+ 1 root audio 116, 5 Oct 9 23:27 controlC0
crw-rw----+ 1 root audio 116, 2 Oct 9 23:27 controlC1
crw-rw----+ 1 root audio 116, 10 Oct 9 23:27 hwC0D0
crw-rw----+ 1 root audio 116, 4 Oct 9 23:27 hwC1D0
crw-rw----+ 1 root audio 116, 7 Oct 9 23:27 pcmC0D0c
crw-rw----+ 1 root audio 116, 6 Oct 9 23:27 pcmC0D0p
crw-rw----+ 1 root audio 116, 8 Oct 9 23:45 pcmC0D1p
crw-rw----+ 1 root audio 116, 9 Oct 9 23:27 pcmC0D2c
crw-rw----+ 1 root audio 116, 3 Oct 9 23:27 pcmC1D3p
crw-rw----+ 1 root audio 116, 1 Oct 9 23:26 seq
crw-rw----+ 1 root audio 116, 33 Oct 9 23:27 timer
Sorry if anything is wrong it's my first post
Last edited by LArchimonde (2014-10-10 13:32:16)No, I checked that in the beggining, however the thing that bothers me is there is, in gnome settings; sound; there is no intel hd or radeonhd choises just "Digital Output" (S/PDIF) -Built-in-Audio". And I can't seem to add new one or anything else. Aslo in the same menu sound; I cannot choose another profile. Just one: Digital Stereo.
I was thinking could the new kernel be guilty? Whenever I installed in the past everything was ok, including the sound. Now there is something that I didn't mention, there were two lines when I started installing Arch yesterday,
"Posible missing firmware aic94, smsmdtv."
This is not exactly how it was written but I do remeber posible and these two "missing" ones, because I writed them down.
That's it. Anyone has any ideas? -
[solved] No sound, ALSA finds soundcard, pulseaudio does not.
Problem:
pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
First appeared when:
Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
What did not help:
Reinstalling packets with pulse|alsa|sound|audio in its name.
Deleting ${HOME}/.pulse* .
Rebooting.
Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
Adding or removing my user to the audio group.
Googling. Other threads i this forum.
Additional infos:
(Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
/dev/dsp does not exist.
fuser -v /dev/snd/* returns nothing
aplay whatever.wav produces no sound.
aplay -D sysdefault whatever.wav works.
Using Gnome 3 started with gdm.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Intel
HDA Intel, ALC272 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=Intel,DEV=0
HDA Intel, HDMI 0
HDMI Audio Output
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
[ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
[ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
[ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
[ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
[ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
[ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
[ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
[ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
[ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
[ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
[ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
[ 0.000000] On node 0 totalpages: 751850
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11696 pages used for memmap
[ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
[ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
[ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
[ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12058624 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1296.696 MHz processor
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003400] Security Framework initialized
[ 0.003407] AppArmor: AppArmor disabled by boot time parameter
[ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008132] Mount-cache hash table entries: 256
[ 0.008498] Initializing cgroup subsys cpuacct
[ 0.008503] Initializing cgroup subsys memory
[ 0.008517] Initializing cgroup subsys devices
[ 0.008520] Initializing cgroup subsys freezer
[ 0.008522] Initializing cgroup subsys net_cls
[ 0.008525] Initializing cgroup subsys blkio
[ 0.008570] CPU: Physical Processor ID: 0
[ 0.008572] CPU: Processor Core ID: 0
[ 0.008575] mce: CPU supports 6 MCE banks
[ 0.008587] CPU0: Thermal monitoring enabled (TM2)
[ 0.008592] process: using mwait in idle threads
[ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.010851] ACPI: Core revision 20120711
[ 0.016699] ftrace: allocating 18348 entries in 72 pages
[ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
[ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063329] ... version: 2
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100007] smpboot: Booting Node 0, Processors #1 OK
[ 0.113162] Brought up 2 CPUs
[ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
[ 0.113436] devtmpfs: initialized
[ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
[ 0.121465] NET: Registered protocol family 16
[ 0.121699] ACPI: bus type pci registered
[ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.174683] PCI: Using configuration type 1 for base access
[ 0.175619] bio: create slab <bio-0> at 0
[ 0.175619] ACPI: Added _OSI(Module Device)
[ 0.175619] ACPI: Added _OSI(Processor Device)
[ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.178073] ACPI: EC: Look up EC in DSDT
[ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188671] ACPI: Dynamic OEM Table Load:
[ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189399] ACPI: Dynamic OEM Table Load:
[ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190407] ACPI: Dynamic OEM Table Load:
[ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190693] ACPI: Dynamic OEM Table Load:
[ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190715] ACPI: Interpreter enabled
[ 0.190715] ACPI: (supports S0 S3 S4 S5)
[ 0.190715] ACPI: Using IOAPIC for interrupt routing
[ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.323314] ACPI: No dock devices found.
[ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.323314] PCI host bridge to bus 0000:00
[ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.323314] DMAR: Forcing write-buffer flush capability
[ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
[ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
[ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
[ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
[ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
[ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
[ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
[ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
[ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
[ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
[ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.326109] pci 0000:08:00.0: supports D1 D2
[ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
[ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
[ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
[ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
[ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.327093] pci 0000:20:00.0: supports D1 D2
[ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
[ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.336689] vgaarb: loaded
[ 0.336691] vgaarb: bridge control possible 0000:00:02.0
[ 0.336769] PCI: Using ACPI for IRQ routing
[ 0.348092] PCI: pci_cache_line_size set to 64 bytes
[ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
[ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
[ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
[ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
[ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
[ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
[ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
[ 0.348791] NetLabel: Initializing
[ 0.348794] NetLabel: domain hash size = 128
[ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.348816] NetLabel: unlabeled traffic allowed by default
[ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.370000] Switching to clocksource hpet
[ 0.381464] pnp: PnP ACPI init
[ 0.381496] ACPI: bus type pnp registered
[ 0.382022] pnp 00:00: [bus 00-ff]
[ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.440057] pnp 00:01: [io 0x0000-0x001f]
[ 0.440061] pnp 00:01: [io 0x0081-0x0091]
[ 0.440065] pnp 00:01: [io 0x0093-0x009f]
[ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
[ 0.440072] pnp 00:01: [dma 4]
[ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.440353] pnp 00:03: [io 0x00f0]
[ 0.440369] pnp 00:03: [irq 13]
[ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440433] pnp 00:04: [io 0x002e-0x002f]
[ 0.440436] pnp 00:04: [io 0x0061]
[ 0.440439] pnp 00:04: [io 0x0063]
[ 0.440443] pnp 00:04: [io 0x0065]
[ 0.440446] pnp 00:04: [io 0x0067]
[ 0.440449] pnp 00:04: [io 0x0070]
[ 0.440452] pnp 00:04: [io 0x0080]
[ 0.440456] pnp 00:04: [io 0x0092]
[ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.440462] pnp 00:04: [io 0x0480-0x048f]
[ 0.440466] pnp 00:04: [io 0xffff]
[ 0.440469] pnp 00:04: [io 0xffff]
[ 0.440472] pnp 00:04: [io 0x0400-0x047f]
[ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
[ 0.440479] pnp 00:04: [io 0xfe00]
[ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
[ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.440578] system 00:04: [io 0xffff] has been reserved
[ 0.440583] system 00:04: [io 0xffff] has been reserved
[ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
[ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.440596] system 00:04: [io 0xfe00] has been reserved
[ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
[ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440620] pnp 00:05: [io 0x0070-0x0077]
[ 0.440629] pnp 00:05: [irq 8]
[ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.440691] pnp 00:06: [io 0x0060]
[ 0.440694] pnp 00:06: [io 0x0064]
[ 0.440703] pnp 00:06: [irq 1]
[ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.440772] pnp 00:07: [irq 12]
[ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
[ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
[ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
[ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441356] pnp: PnP ACPI: found 9 devices
[ 0.441359] ACPI: ACPI bus type pnp unregistered
[ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
[ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
[ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
[ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
[ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
[ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
[ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
[ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
[ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
[ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
[ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450219] NET: Registered protocol family 2
[ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.456888] TCP: reno registered
[ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.457123] NET: Registered protocol family 1
[ 0.457150] pci 0000:00:02.0: Boot video device
[ 0.457669] PCI: CLS 64 bytes, default 64
[ 0.457746] Unpacking initramfs...
[ 0.626300] Freeing initrd memory: 4636k freed
[ 0.628543] Simple Boot Flag at 0x3e set to 0x1
[ 0.629045] audit: initializing netlink socket (disabled)
[ 0.629069] type=2000 audit(1354288244.626:1): initialized
[ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.651510] VFS: Disk quotas dquot_6.5.2
[ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.651831] msgmni has been set to 5759
[ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.652204] io scheduler noop registered
[ 0.652208] io scheduler deadline registered
[ 0.652301] io scheduler cfq registered (default)
[ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.653107] intel_idle: does not run on family 6 model 23
[ 0.653156] GHES: HEST is not enabled!
[ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.653953] Linux agpgart interface v0.103
[ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.669294] mousedev: PS/2 mouse device common for all mice
[ 0.670409] rtc_cmos 00:05: RTC can wake from S4
[ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.670648] cpuidle: using governor ladder
[ 0.670651] cpuidle: using governor menu
[ 0.670829] drop_monitor: Initializing network drop monitor service
[ 0.670946] TCP: cubic registered
[ 0.671122] NET: Registered protocol family 10
[ 0.671359] NET: Registered protocol family 17
[ 0.671373] Key type dns_resolver registered
[ 0.671720] PM: Hibernation image not present or could not be loaded.
[ 0.671743] registered taskstats version 1
[ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
[ 0.674872] Freeing unused kernel memory: 772k freed
[ 0.675168] Write protecting the kernel read-only data: 8192k
[ 0.682434] Freeing unused kernel memory: 1408k freed
[ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.685881] Freeing unused kernel memory: 568k freed
[ 0.698116] systemd-udevd[43]: starting version 195
[ 0.701918] SCSI subsystem initialized
[ 0.703991] ACPI: bus type scsi registered
[ 0.704082] libata version 3.00 loaded.
[ 0.705773] ahci 0000:00:1f.2: version 3.0
[ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.708617] scsi0 : ahci
[ 0.709413] scsi1 : ahci
[ 0.709823] scsi2 : ahci
[ 0.710229] scsi3 : ahci
[ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
[ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
[ 0.710367] ata3: DUMMY
[ 0.710370] ata4: DUMMY
[ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
[ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.200123] ata1.00: configured for UDMA/133
[ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
[ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
[ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
[ 1.213590] ata2.00: applying bridge limits
[ 1.229911] ata2.00: configured for UDMA/100
[ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
[ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.273864] ACPI: bus type usb registered
[ 1.273912] usbcore: registered new interface driver usbfs
[ 1.273946] usbcore: registered new interface driver hub
[ 1.273996] usbcore: registered new device driver usb
[ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
[ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.286950] hub 1-0:1.0: USB hub found
[ 1.286958] hub 1-0:1.0: 6 ports detected
[ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
[ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.300266] hub 2-0:1.0: USB hub found
[ 1.300273] hub 2-0:1.0: 6 ports detected
[ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.301506] hub 3-0:1.0: USB hub found
[ 1.301513] hub 3-0:1.0: 2 ports detected
[ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.301997] hub 4-0:1.0: USB hub found
[ 1.302004] hub 4-0:1.0: 2 ports detected
[ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.302434] hub 5-0:1.0: USB hub found
[ 1.302441] hub 5-0:1.0: 2 ports detected
[ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.302824] hub 6-0:1.0: USB hub found
[ 1.302833] hub 6-0:1.0: 2 ports detected
[ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.303759] hub 7-0:1.0: USB hub found
[ 1.303766] hub 7-0:1.0: 2 ports detected
[ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.304881] hub 8-0:1.0: USB hub found
[ 1.304888] hub 8-0:1.0: 2 ports detected
[ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1.330105] [drm] Initialized drm 1.1.0 20060810
[ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.334889] ACPI: Lid Switch [LID0]
[ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.335086] ACPI: Power Button [PWRB]
[ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.335196] ACPI: Power Button [PWRF]
[ 1.341526] i915 0000:00:02.0: setting latency timer to 64
[ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.415008] [drm] Driver supports precise vblank timestamp query.
[ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
[ 1.630036] Switching to clocksource tsc
[ 2.030864] fbcon: inteldrmfb (fb0) is primary device
[ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[ 2.574662] Console: switching to colour frame buffer device 170x48
[ 2.579271] fb0: inteldrmfb frame buffer device
[ 2.579273] drm: registered panic notifier
[ 2.680113] acpi device:07: registered as cooling_device0
[ 2.780104] acpi device:08: registered as cooling_device1
[ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.963907] device-mapper: uevent: version 1.0.3
[ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
[ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
[ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
[ 9.679599] XFS (dm-0): Mounting Filesystem
[ 9.807350] XFS (dm-0): Ending clean mount
[ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
[ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.845393] systemd[1]: Starting Login Prompts.
[ 11.845414] systemd[1]: Reached target Login Prompts.
[ 11.845429] systemd[1]: Starting Arch Daemons.
[ 11.845447] systemd[1]: Reached target Arch Daemons.
[ 11.845462] systemd[1]: Starting Remote File Systems.
[ 11.845481] systemd[1]: Reached target Remote File Systems.
[ 11.845496] systemd[1]: Starting Syslog Socket.
[ 11.845558] systemd[1]: Listening on Syslog Socket.
[ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.845766] systemd[1]: Starting udev Kernel Socket.
[ 11.845804] systemd[1]: Listening on udev Kernel Socket.
[ 11.845885] systemd[1]: Starting udev Control Socket.
[ 11.845927] systemd[1]: Listening on udev Control Socket.
[ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
[ 11.846175] systemd[1]: Expecting device dev-sda8.device...
[ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
[ 11.846210] systemd[1]: Expecting device dev-sda6.device...
[ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
[ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
[ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
[ 11.846368] systemd[1]: Starting Journal Socket.
[ 11.846439] systemd[1]: Listening on Journal Socket.
[ 11.846467] systemd[1]: Started File System Check on Root Device.
[ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.850382] systemd[1]: Mounting Temporary Directory...
[ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
[ 12.026864] systemd[1]: Mounting Huge Pages File System...
[ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
[ 12.156149] systemd[1]: Starting Load Kernel Modules...
[ 12.173525] systemd[1]: Mounting Debug File System...
[ 12.186770] systemd[1]: Starting Setup Virtual Console...
[ 12.484840] systemd[1]: Starting Apply Kernel Variables...
[ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
[ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
[ 12.636850] systemd[1]: Starting Journal Service...
[ 12.646587] systemd[1]: Started Journal Service.
[ 12.646650] systemd[1]: Starting Syslog.
[ 12.646684] systemd[1]: Reached target Syslog.
[ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
[ 12.647816] systemd[1]: Mounted Temporary Directory.
[ 12.647972] systemd[1]: Mounted Huge Pages File System.
[ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.653654] systemd[1]: Mounted Debug File System.
[ 12.653705] systemd[1]: Starting Local File Systems (Pre).
[ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
[ 12.653749] systemd[1]: Starting Load Random Seed...
[ 12.705203] FS-Cache: Loaded
[ 12.740616] RPC: Registered named UNIX socket transport module.
[ 12.740621] RPC: Registered udp transport module.
[ 12.740624] RPC: Registered tcp transport module.
[ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.881473] systemd-udevd[162]: starting version 196
[ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
[ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
[ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
[ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
[ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.330974] lib80211: common routines for IEEE802.11 drivers
[ 14.330979] lib80211_crypt: registered algorithm 'NULL'
[ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 14.709327] ACPI: Requesting acpi_cpufreq
[ 14.714946] Monitor-Mwait will be used to enter C-1 state
[ 14.714973] Monitor-Mwait will be used to enter C-2 state
[ 14.714989] Monitor-Mwait will be used to enter C-3 state
[ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
[ 14.715031] ACPI: acpi_idle registered with cpuidle
[ 14.720557] Switching to clocksource hpet
[ 14.757813] wmi: Mapper loaded
[ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
[ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 15.417769] iTCO_vendor_support: vendor-support=0
[ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
[ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
[ 15.585549] Disabling lock debugging due to kernel taint
[ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
[ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
[ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.108446] Linux media interface: v0.10
[ 16.120558] Linux video capture interface: v2.00
[ 16.169228] usbcore: registered new interface driver uas
[ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
[ 16.316308] Initializing USB Mass Storage driver...
[ 16.316609] usbcore: registered new interface driver usb-storage
[ 16.316613] USB Mass Storage support registered.
[ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
[ 16.328873] usbcore: registered new interface driver uvcvideo
[ 16.328876] USB Video Class driver (1.1.1)
[ 16.779720] usb 2-4: USB disconnect, device number 2
[ 16.783629] scsi4 : usb-storage 2-4:1.0
[ 16.783773] usbcore: registered new interface driver ums-realtek
[ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
[ 21.656824] XFS (dm-1): Mounting Filesystem
[ 21.839619] XFS (dm-1): Ending clean mount
[ 21.940898] systemd-journald[163]: Received SIGUSR1
[ 28.055735] r8169 0000:20:00.0: eth0: link down
[ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.875645] Bluetooth: Core ver 2.16
[ 28.875677] NET: Registered protocol family 31
[ 28.875680] Bluetooth: HCI device and connection manager initialized
[ 28.875684] Bluetooth: HCI socket layer initialized
[ 28.875687] Bluetooth: L2CAP socket layer initialized
[ 28.875695] Bluetooth: SCO socket layer initialized
[ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.807702] fuse init (API version 7.20)
[ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
lsmod
Module Size Used by
fuse 69173 2
michael_mic 2074 8
arc4 2039 4
ecb 2105 0
bnep 8857 2
bluetooth 192120 7 bnep
snd_seq 50881 1
snd_seq_device 5268 1 snd_seq
ums_realtek 7391 0
usb_storage 47384 1 ums_realtek
uvcvideo 72787 0
videobuf2_vmalloc 2468 1 uvcvideo
uas 11119 0
videobuf2_memops 2246 1 videobuf2_vmalloc
videobuf2_core 24030 1 uvcvideo
videodev 100859 2 uvcvideo,videobuf2_core
media 10405 2 uvcvideo,videodev
i2c_i801 9571 0
joydev 9991 0
coretemp 6070 0
kvm_intel 124749 0
lib80211_crypt_tkip 7738 0
wl 2558087 0
kvm 373917 1 kvm_intel
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
dell_wmi 1485 0
acpi_cpufreq 5933 1
lpc_ich 10609 0
ac 2536 0
mperf 1267 1 acpi_cpufreq
sparse_keymap 3056 1 dell_wmi
battery 6773 0
wmi 8379 1 dell_wmi
dell_laptop 8787 0
processor 26855 3 acpi_cpufreq
evdev 10266 12
psmouse 71909 0
serio_raw 4689 0
dcdbas 5520 1 dell_laptop
lib80211 3949 2 wl,lib80211_crypt_tkip
microcode 12377 0
cfg80211 177108 1 wl
rfkill 15604 5 cfg80211,bluetooth
snd_hda_codec_hdmi 24487 1
snd_hda_codec_realtek 61193 1
snd_hda_intel 26180 3
snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6428 1 snd_hda_codec
snd_pcm_oss 38992 0
snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18934 3 snd_pcm,snd_seq
snd_mixer_oss 15347 1 snd_pcm_oss
snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
soundcore 5442 1 snd
pcspkr 1899 0
r8169 56839 0
mii 4091 1 r8169
nfs 127007 0
lockd 64904 1 nfs
sunrpc 186092 2 nfs,lockd
fscache 40995 1 nfs
ablk_helper 1972 0
cryptd 8741 1 ablk_helper
aes_x86_64 7508 6
aes_generic 26138 1 aes_x86_64
xts 3101 3
gf128mul 6050 1 xts
dm_crypt 15799 3
dm_mod 72105 7 dm_crypt
i915 495521 3
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218852 4 i915,drm_kms_helper
i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
vfat 10119 0
fat 48338 1 vfat
xfs 748207 2
ext4 440434 1
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
uhci_hcd 23436 0
ehci_hcd 41816 0
sr_mod 14823 0
usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
usb_common 954 1 usbcore
cdrom 35520 1 sr_mod
sd_mod 29559 5
ahci 21360 4
libahci 20023 1 ahci
libata 167683 2 ahci,libahci
scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
pacman -Q | grep ...
alsa-lib 1.0.26-1
alsa-plugins 1.0.26-1
alsa-utils 1.0.26-1
alsaplayer 0.99.81-5
lib32-alsa-lib 1.0.26-1
lib32-alsa-plugins 1.0.26-1
lib32-libpulse 2.1-1
lib32-libsndfile 1.0.25-2
libcanberra-pulse 0.30-2
libcdaudio 0.99.12-6
libpulse 2.1-1
libsndfile 1.0.25-2
portaudio 19_20111121-1
pulseaudio 2.1-1
pulseaudio-alsa 2-1
sound-juicer 3.5.0-1
sound-theme-freedesktop 0.8-1
soundtouch 1.6.0-1
teamspeak-soundpack-portal 1-4
webrtc-audio-processing 0.1-1
pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
Module #4
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
Module #5
Name: module-jackdbus-detect
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.descriptI set the loglevel to debug and rebooted.
grep -i pulse /var/log/everything.log
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
By now I also made my system not load any moudules which have oss in their name. Didn't help either. -
[SOLVED] Hotkeys on Asus 1015 PEM
Hey everyone,
So i've been trying to install arch linux on my Asus netbook (ASUS 1015 PEM) and it's been working spectacularly well. Things have just been working that I wouldnt've expected, and it's really great. My only problem is that I'm currently unable to get my hotkeys to work well. Specifically, the one to blank the screen doesn't work and the sound ones are laggy/buggy.
I followed the guide here to get acpi-eeepc-laptop working:
https://bbs.archlinux.org/viewtopic.php … 43#p881743
and it got a lot of my buttons working. The sound ones work (increase volume, decrease volume, and mute) but they are really buggy. Specifically, they're slow to react and it seems like they almost stack; if i hit increase volume 10 times but the volume is maxed out after 5 times, i have to lower the volume 5 times before i can actually lower the volume. It's like I have to cancel out the other 5 times. It's really peculiar and I was wondering whether anyone has run into similar problems and found a solution.
Here's my /etc/rc.conf:
# /etc/rc.conf - Main Configuration for Arch Linux
# LOCALIZATION
# LOCALE: available languages can be listed with the 'locale -a' command
# DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
# startup and during the boot process. If set to 'no', the C locale is used.
# HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
# in the hardware clock being left untouched (useful for virtualization)
# Note: Using "localtime" is discouraged.
# TIMEZONE: timezones are found in /usr/share/zoneinfo
# KEYMAP: keymaps are found in /usr/share/kbd/keymaps
# CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
# CONSOLEMAP: found in /usr/share/kbd/consoletrans
# USECOLOR: use ANSI color sequences in startup messages
# VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
LOCALE="en_US.UTF-8"
DAEMON_LOCALE="no"
HARDWARECLOCK="UTC"
TIMEZONE="America/Chicago"
KEYMAP="dvorak"
CONSOLEFONT=
CONSOLEMAP=
USECOLOR="yes"
VERBOSE="3"
# HARDWARE
# MOD_AUTOLOAD: Allow autoloading of modules at boot and when needed
# MODULES: Modules to load at boot-up. Prefix with a ! to blacklist.
MOD_AUTOLOAD="yes"
MODULES=(!net-pf-10 !pcspkr loop acpi-cpufreq cpufreq_ondemand eeepc-wmi rfkill bluetooth eeepc_laptop)
# Udev settle timeout (default to 30)
UDEV_TIMEOUT=30
# Scan for FakeRAID (dmraid) Volumes at startup
USEDMRAID="no"
# Scan for BTRFS volumes at startup
USEBTRFS="no"
# Scan for LVM volume groups at startup, required if you use LVM
USELVM="no"
# NETWORKING
# HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
HOSTNAME="luna"
# Use 'ifconfig -a' or 'ls /sys/class/net/' to see all available interfaces.
# Interfaces to start at boot-up (in this order)
# Declare each interface then list in INTERFACES
# - prefix an entry in INTERFACES with a ! to disable it
# - no hyphens in your interface names - Bash doesn't like it
# DHCP: Set your interface to "dhcp" (eth0="dhcp")
# Wireless: See network profiles below
#Static IP example
#eth0="eth0 192.168.0.2 netmask 255.255.255.0 broadcast 192.168.0.255"
eth0="dhcp"
INTERFACES=(!eth0 !wlan0)
# Routes to start at boot-up (in this order)
# Declare each route then list in ROUTES
# - prefix an entry in ROUTES with a ! to disable it
gateway="default gw 192.168.0.1"
ROUTES=(!gateway)
# Setting this to "yes" will skip network shutdown.
# This is required if your root device is on NFS.
NETWORK_PERSIST="no"
# Enable these network profiles at boot-up. These are only useful
# if you happen to need multiple network configurations (ie, laptop users)
# - set to 'menu' to present a menu during boot-up (dialog package required)
# - prefix an entry with a ! to disable it
# Network profiles are found in /etc/network.d
# This now requires the netcfg package
#NETWORKS=(main)
# DAEMONS
# Daemons to start at boot-up (in this order)
# - prefix a daemon with a ! to disable it
# - prefix a daemon with a @ to start it up in the background
# If something other takes care of your hardware clock (ntpd, dual-boot...)
# you should disable 'hwclock' here.
DAEMONS=(hwclock @syslog-ng dbus @acpid !network !dhcdbd !networkmanager wicd netfs @crond @alsa)
and my /etc/conf.d/acpi-eeepc-generic.conf
# Configuration file for EeePC ACPI utilities
# Please edit to your liking!!!
# http://code.google.com/p/acpi-eeepc-generic/
# http://aur.archlinux.org/packages.php?ID=23318
# Copyright 2009 Nicolas Bigaouette
# This file is part of acpi-eeepc-generic.
# acpi-eeepc-generic is free software: you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation, either version 3 of the License, or
# (at your option) any later version.
# acpi-eeepc-generic is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU General Public License for more details.
# You should have received a copy of the GNU General Public License
# along with acpi-eeepc-generic. If not, see <http://www.gnu.org/licenses/>.
# Put your username in "XUSER". It _is_ important.
# Some defaults are defined, but
# they might not work on your system. For example, the task manager
# used is "lxtask", which is part of the LXDE desktop environment.
# You can install it with "pacman -S lxtask". You can use
# something else if you want, just be sure to edit the appropriate
# variable.
# Format:
# Format of the settings is as follow:
# VARIABLE_NAME=("command number 1" "command number 2" "etc.")
# Note that:
# -Commands with spaces _need_ to be double-quoted
# -You can put as many commands as you want, as in the previous example
# -Some defaults are provided which might not work on your
# system. Please edit as your liking. Look at
# COMMANDS_WIFI_POST_UP for example. It uses by
# default "wicd" for for network management. It is killed and
# re-run to save battery. If you don't use wicd, please remove
# it from the commands to run!!!
# -All commands are executed as root. To execute a command as
# yourself (not root), put @ in front of the command. This allow
# graphical applications to work.
# -If a key is not working, uncomment KEY_SHOW. It will show
# you the code of the key you pressed. Then report it to me
# with your model number.
# -Change your wifi module. By default it uses "rt2860sta", which
# is the one used in the 901/1000*.
# -You can choose between different OSD:
# libnotify: by default (GTK), you need "notification-daemon"
# knotify: OSD used by KDE, you need "kdebase"
# dzen: Small OSD, you need "dzen2"
# NONE: You guessed it... none :)
# Different helper script you can use:
# Rotate the screen
# /etc/acpi/eeepc/acpi-eeepc-generic-rotate-lvds.sh
# Suspend to ram
# /etc/acpi/eeepc/acpi-eeepc-generic-suspend2ram.sh
# Toggle bluetooth on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-bluetooth.sh
# Toggle between different monitors
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-displays.sh
# Toggle a suspension lock on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-lock-suspend.sh
# Toggle card reader on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-cardr.sh
# Change between supported screen resolutions
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-resolution.sh
# Enable or disable the touchpad (needs SHM)
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-touchpad.sh
# Toggle webcam on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-webcam.sh
# Toggle wifi on and off
# /etc/acpi/eeepc/acpi-eeepc-generic-toggle-wifi.sh
# Different hardware states can be saved and restored when needed.
# To restore at boot, just add "eeepc-restore" to your DAEMONS
# array in /etc/rc.conf
### Fallback user to be used for X session if autodetection fails
XUSER=parth
### Choose what kind of notification you want. libnotify is the
### default, but can disable it with NONE.
NOTIFY="libnotify" # Gnome, XFCE, GTK
#NOTIFY="kdialog" # KDE, QT
#NOTIFY="dzen" # dwm, wmii, xmonad or any other
#NOTIFY="naughty" # Awesome window manager
#NOTIFY=NONE
NOTIFY_DURATION="2000" # Duration, in ms, of the OSD
### Show the ACPI key event
#KEY_SHOW="1"
### Some scripts needs to be run as root. Specify how to gain priviledges
SUDO="sudo"
#SUDO="kdesu -i eee"
#SUDO="gksu" # Append "--sudo-mode" to use sudo instead of su
### Drivers used by this Eee. Most used are "rt2860sta", "ath9k"
### and "iwlagn". For Madwifi, you can try this exact list:
### "wlan_tkip" "wlan_ccmp" "ath_pci" "ath_rate_sample" "ath_hal" "wlan_scan_sta" "wlan"
WIFI_DRIVERS=("rt2860sta")
BLUETOOTH_DRIVERS=("bluetooth")
CAMERA_DRIVERS=("uvcvideo")
# Let acpi-eeepc-generic load/unload modules?
#DRIVERS_LOAD="no" # default: yes
#DRIVERS_UNLOAD="no" # default: yes
### Volume options
ALSA_VOLUME_MIXER=("Master") # Mixer(s) to change volume
### Defined commands on specific key press
### Please edit to what you want!!!
### Some defaults are provided, but they might not work on your
### system if you don't have the utility installed.
COMMANDS_POWER_BUTTON=("/sbin/shutdown -t3 -h now")
# Users of LXDE might consider the following:
#COMMANDS_POWER_BUTTON=("@_LXSESSION_PID=`pidof lxsession` lxde-logout")
# See http://code.google.com/p/acpi-eeepc-generic/issues/detail?id=26
# and http://wiki.archlinux.org/index.php/LXDE#Shutdown_and_Reboot_from_LXDE
# These are the 4 silver buttons, located above the Fn+F2 to
# Fn+F6 on certain models and the Fn+Spacebar. The first just
# shutdown your screen to save power. The second toggle the touchpad on and off.
# Note the "@" in from of the two user button commands: because
# of this, theese commands will be executed as yourself and not root.
# The User1, User2 & User3 (when available) are executed as your username!!!
COMMANDS_BUTTON_BLANK=("xset dpms force off")
COMMANDS_BUTTON_RESOLUTION=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-touchpad.sh")
COMMANDS_BUTTON_USER1=("@terminal")
COMMANDS_BUTTON_USER2=("@pcmanfm --no-desktop")
COMMANDS_SHE_TOGGLE=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-she.sh")
COMMANDS_SLEEP=("/etc/acpi/eeepc/acpi-eeepc-generic-suspend2ram.sh")
# On some models, calling the wifi toggle script can prevent the card from
# being re-enabled. If you have that problem, just don't call the script and
# let the BIOS dis/enable the card.
# See http://wiki.github.com/nbigaouette/acpi-eeepc-generic/wireless
COMMANDS_WIFI_TOGGLE=("")
COMMANDS_WIFI_UP=()
COMMANDS_WIFI_DOWN=()
COMMANDS_WIFI_PRE_UP=()
#COMMANDS_WIFI_POST_UP=("/etc/rc.d/wicd start" "@wicd-client")
#COMMANDS_WIFI_PRE_DOWN=("pkill wicd-client" "/etc/rc.d/wicd stop" "pkill wpa_supplicant" "pkill dhcpcd")
COMMANDS_WIFI_POST_UP=()
COMMANDS_WIFI_PRE_DOWN=()
COMMANDS_WIFI_POST_DOWN=()
COMMANDS_BLUETOOTH_TOGGLE=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-bluetooth.sh")
COMMANDS_BLUETOOTH_UP=()
COMMANDS_BLUETOOTH_DOWN=()
COMMANDS_BLUETOOTH_PRE_UP=()
COMMANDS_BLUETOOTH_POST_UP=()
COMMANDS_BLUETOOTH_PRE_DOWN=()
COMMANDS_BLUETOOTH_POST_DOWN=()
COMMANDS_TOUCHPAD_TOGGLE=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-touchpad.sh")
COMMANDS_RESOLUTION=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-resolution.sh")
COMMANDS_BRIGHTNESS_DOWN=() # Brightness down controled by BIOS
COMMANDS_BRIGHTNESS_UP=() # Brightness up controled by BIOS
#COMMANDS_SCREEN_OFF=(/etc/acpi/eeepc/acpi-eeepc-generic-rotate-lvds.sh)
COMMANDS_SCREEN_OFF=("${COMMANDS_BLUETOOTH_TOGGLE[@]}")
#COMMANDS_XRANDR_TOGGLE=("@lxrandr") # Run as user (not root)
COMMANDS_XRANDR_TOGGLE=("/etc/acpi/eeepc/acpi-eeepc-generic-toggle-displays.sh")
COMMANDS_XRANDR_TOGGLE_VGA="above" # VGA is: right-of, left-of, above or below of LVDS
COMMANDS_TASKM=("@lxtask")
#COMMANDS_TASKM=("@xterm htop")
#COMMANDS_TASKM=("@ksysguard")
# If you use OSS, you can use http://ossvol.sourceforge.net/
COMMANDS_MUTE=("alsa_toggle_mute")
COMMANDS_VOLUME_DOWN=("amixer set Master 5%-")
COMMANDS_VOLUME_UP=("amixer set Master 5%+")
COMMANDS_AC_UNPLUGGED=()
COMMANDS_AC_PLUGGED=()
COMMANDS_ON_LID_CLOSE="yes"
COMMANDS_LID_CLOSE_ON_AC=("xset dpms force off") # Just turn the backlight off
#COMMANDS_LID_CLOSE_ON_AC=("${COMMANDS_SLEEP[@]}") # Do the same as COMMANDS_SLEEP
COMMANDS_LID_CLOSE_ON_BATTERY=("${COMMANDS_SLEEP[@]}") # Do the same as COMMANDS_SLEEP
### Check for these processes before suspending
SUSPEND_BLACKLISTED_PROCESSES=(vlc mplayer smplayer kmplayer skype dragon songbird-bin amarok)
### Change the suspend commands.
SUSPEND2RAM_COMMANDS=("echo -n \"mem\" > /sys/power/state") # Simple suspend
#SUSPEND2RAM_COMMANDS=("pm-suspend") # Use pm-utils
#SUSPEND_QUIRKS_VTSWITCH="yes"
### Display toggling options (excluding LVDS only, since you
### need that one!). You can use any of these three, in any order.
#XRANDR_AVAILABLE_MODES=("clone" "vga" "both")
XRANDR_AVAILABLE_MODES=("vga" "both")
### Restore feature: On boot, restore different hardware states
RESTORE_BLUETOOTH=0
RESTORE_BRIGHTNESS=0
RESTORE_TOUCHPAD=0
RESTORE_WIFI=0
### If you mount /var/log in ram (to protect an SSD drive), you
### might want to backup them on shutdown/suspend, just in case.
### Add "logsbackup" to your DAEMONS array in /etc/rc.conf. You
### can also set the folder where to send these compressed backups.
LOGSBACKUP_FOLDER="/logs_backup"
### Please comment/remove the following, to prove that you edited
### and read fully the file ;)
### Else, you will get a 20 second warning.
#EEEPC_CONF_DONE="no"
#EEEPC_MODEL="1015PEM"
#EEEPC_CPU="Atom"
Any help would be greatly appreciated, thank you!
-parth
Last edited by plutoisaplanet (2011-05-20 23:07:03)Okay, I was able to fix the issue by disabling the volume commands in etc/conf.d/acpi-eeepc-generic.conf (as shown in the code)
COMMANDS_MUTE=("")
COMMANDS_VOLUME_DOWN=("")
COMMANDS_VOLUME_UP=("")
and then having openbox bind the volume keys to commands (amixer sset Master toggle, amixer sset Master 5%+, etc.).
It's a workaround but it works.
As for blanking the screen it's not the biggest issue in the world so i'll probably leave it for another time.
-parth -
[Solved] Multiple sounds at the same time
Hello!
I've just received my new Creative X-Fi Titanium since I was in need of an optical in socket and have spent a while trying to get it to work to my liking.
I read through the ALSA wiki, read countless posts on the forums such as this one http://bbs.archlinux.org/viewtopic.php?pid=702994, tried several .asoundrc files and of course read the related arch wiki pages without much success.
Everything is upmixed properly to 5.1 output but I still can't play two sounds at once - with one odd exception:
When I have mpd playing and start a youtube video, sound will play but it will only output through the 2 front speakers and I can pause and unpause mpd normally, sound will return.
When I pause mpd and play a youtube video, it gets upmixed properly but mpd returns "error: problems opening sound device".
Mplayer returns [AO_ALSA] alsa-lib: pcm_hw.c:1291:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Invalid argument and [AO_ALSA] alsa-lib: pcm_dmix.c:1060:(snd_pcm_dmix_open) unable to open slave.
Heroes of Newerth returns the same: ALSA lib pcm_dmix.c:1060:(snd_pcm_dmix_open) unable to open slave.
fuser -v /dev/snd/*
/dev/snd/controlC0: eyescream 27612 F.... Steam.exe
/dev/snd/pcmC0D0p: eyescream 27612 F...m Steam.exe
fuser -v /dev/dsp*
zsh: no matches found: /dev/dsp*
cat .asoundrc
pcm.snd_card {
type hw
card 0 # change to your cards number or name
# 6 channel dmix:
pcm.dmix6 {
type dmix
ipc_key 1024
ipc_key_add_uid false
ipc_perm 0666
slave {
pcm "hw:0,0"
rate 48000
format "S32_LE"
channels 6
period_time 0
period_size 1024
buffer_time 0
buffer_size 8192
# upmixing:
pcm.ch51dup {
type route
slave.pcm dmix6
slave.channels 6
ttable.0.0 1
ttable.1.1 1
ttable.0.2 0.6
ttable.1.3 0.6
ttable.0.4 0.5
ttable.1.4 0.5
ttable.0.5 0.5
ttable.1.5 0.5
pcm.duplex {
type asym
playback.pcm "ch51dup" # upmix first
capture.pcm "hw:0"
# change default device:
pcm.!default {
type plug
slave {
pcm "duplex"
# for aoss
#pcm.dsp "duplex"
#pcm.dsp1 "duplex"
If anyone could hint me in the right direction as to how I could get it to work properly or provide me with a working .asoundrc, I'd appreciate it!
Last edited by eyescream (2010-02-25 19:30:30)eyescream wrote:I can have sound in mpd and mplayer at the same time now
Good. So file the damned bug report against mpd. Right now would be a good time.
eyescream wrote:but flash completely blocks sound off for other things.
See thread. Prove to me that flash/firefox is blocking:
fuser -v /dev/snd/* /dev/dsp*
eyescream wrote:The problem now is that mpd only outputs through my front speakers, so it isn't being upmixed anymore.
Forget about upmixing for the moment, until you've got the ALSA/OSS conflict solved.
Edit: Use e.g.:
audio_output {
type "alsa"
name "Sound Card"
options "dev=dmixer"
device "headphones"
In /etc/mpd.conf or ~/.mpdconf, where the device string matches an ALSA pcm entry.
eyescream wrote:What do you mean by not renaming "default" exactly?
This, of course, from your own ~/.asoundrc
# change default device:
pcm.!default {
type plug
slave {
pcm "duplex"
Comment that section out, for the time being.
Last edited by brebs (2010-02-25 02:43:54) -
(Solved) one sound application at a time
hello,archers! I moved from gnome to Kde(at last) and faced the issue. E.G if amarok plays musik there's no system notifications and smplayer plays no sound t.i only one programm can use alsa at a time. I have latest kde, alsa and gstreamer and xine backends for phonon. alsamixer shows everything's ok. What should I do? thnx.
Last edited by off220 (2011-01-15 10:30:01)Ok. I've been able to solve the problem by creating /home/user/.asoundrc file with this content
pcm.softvolPhonon {
type softvol
slave.pcm "default:CARD=0"
control {
name "Phonon"
card 0
min_dB -51.0
max_dB 0.0
resolution 100
hint {
show on
description "My Soundcard with extra Volume Control"
Then I just choose Phonon as the mail output in sound preferences. Solved. -
[Solved]No sound anymore (ALSA/PulseAudio)
Ok so I have no idea why I have no sound anymore, I didn't install anything...
Anyway, that's what I've tried:
-Check if mixer are all up in alsamixer
-Try to play a bit with pavucontrol
-Reboot
-Rerun pulseaudio with verbose
-Mute and unmute with physical button (I don't know why but I used to get this problem and it used to be solved just doing this)
-Googgling and searching this forum
Here are some more info
Pulseaudio logs:
└┼─$─┤▶ pulseaudio -k; pulseaudio -vvvvv
E: [pulseaudio] main.c: Failed to kill daemon: No such process
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is a3af3988434b49f3b8af2ab66eba685b.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1001/pulse.
I: [pulseaudio] main.c: Using state directory /home/unkn0wn/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-jackdbus-detect.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c9a6328a5bfaef44136d134253502922 as :1.32
D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "channels=2").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-policy.so': success
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-discover.so': success
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez5-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 54d6e91cb1d72b925a540cf453502907 as :1.40
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez4-discover.so': failure
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null: front-left: 99957 / 153%, front-right: 99957 / 153%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink auto_null.
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: device.description = "Dummy Output"
I: [pulseaudio] sink.c: device.class = "abstract"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-device-restore.c: Restoring mute state for source auto_null.monitor.
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
D: [null-sink] module-null-sink.c: Thread starting up
D: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #16; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-console-kit.so': success
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-systemd-login.so': success
I: [pulseaudio] client.c: Created 0 "Login Session c1"
D: [pulseaudio] module-systemd-login.c: Added new session c1
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: Daemon startup complete.
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
I: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle f
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
-I see the mixer going up and down in pavucontrol if I play some music
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
└┼─$─┤▶ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
└┼─$─┤▶ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, CX20590 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
Don't really know what else to provide...
About my setup it's a thinkpad t420 not plugged in any hdmi screen or simething like that
Thank you
Last edited by Truc (2014-04-19 13:15:28)└┼─$─┤▶ fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: unkn0wn 2231 F.... volumeicon
└┼─$─┤▶ speaker-test -c 2 -t wav -D plughw:0,0
speaker-test 1.0.27.2
Playback device is plughw:0,0
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Playback open error: -16,Device or resource busy
It says it's busy but I don't see anything that could use it. I quit skype before trying -
How to solve no sound in XP on new PCs after reboot. solution
hello all ..
how to know Many of us have chosen to install on their computers windows XP
and I think we all have a problem with sound.
When we already find correct drivers that make the sound appear,
there is another problem, after restart, the computer lost the driver.
and now I write, what to do, that it was not.
I do not mean to put in the startup file
that will be at every restart, Restarted UAA BUS DRIVER.
I mean to be a sound and speaker icon next to the clock without unnecessary processes ..
to solve the problem and enjoy the sound, you must copy from the computer where is installed Windows Vista SP2 x32 or x64
the file HDAUDBUS.SYS who find in Windows \ system32 \ DriverStore \ FileRepository \ HDAUDBUS.INF
then in our system, XP x32 or x64-based open device manager and then open the System device
and click on "Microsoft UAA Bus Driver" and select Update Driver
and then point out the place where you keep a file Hdaudbus.sys copied from Vista.
we do this with both "UAA bus driver" from device manager forced to manually update the driver,
and after enjoy the sounds and loudspeaker icon after every restart
vista x32 Hdaudbus.sys--> 548kb for XP x32 sp2/sp3
vista x64 Hdaudbus.sys--> 927kb for XP x64 sp2
enjoy http://www.speedyshare.com/files/23515304/UAA_BUS_DRIVER_z_VISTY.rarHi,
Witam na forum. Milo ponownie zobaczyc rodaka.
fingerprint sensor:
AuthenTec AES1610 Fingerprint Sensor here
kontroller IEEE1394 zgodny z OHCI:
IEEE1394 here
HP integrated Module:
Bluetooth wireless here
Zeby byc pewnym ze na pewno dostarcze ci dobre sterowniki audio prosze zeby postapil zgodnia z ponizsza procedura:
Go to Control Panel -> System -> Hardware -> Devices Manager
Click with right button of Your mouse on each yellow sign and choose properties. Then go to bottom details and paste here device id. This way we will know what it is.
Below You've got example how to do it:
How to get Recovery disk all informations here.
Links to get Vista recovery disk You may found here.
Z tym ze z tego co pamietam to niestety jezeli chodzi o Polske to nie zadziala.
Skontaktuj sie z HP i popros o taka plytke.
Contact with HP. How to do it all informations here (just choose Your country).
Jezeli beda jeszcze jakies problemy po prostu pytaj.
Message Edited by Daniel_Potyrala on 11-01-2009 01:50 PM
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
[Solved] No sound on Dell XPS 13 2015 (9343) with BIOS A03
I have been unable to get sound to work on my new 2015 Dell XPS 13 Developer Edition running kernel 4.0.1-1-ARCH. Arch is the only OS installed.
I have checked the wiki page and this forum post, which seems to indicate it should work with this configuration out of the box.
However, audio does not play through the speakers (the speakers were working in the original Ubuntu 14.04 installation) and when I tried to un-mute the volume, as described in the ALSA wiki page I received the following message:
$ amixer sset Master unmute
amixer: Unable to find simple control 'Master',0
I am not sure what other pertinent information to post, please forgive my ignorance and let me know. Thank you for your assistance.
Last edited by lkarunan (2015-05-17 13:42:47)I have installed the patched kernel and rebooted twice but am still encountering the same problem. The only difference to altercation's instructions is that the aur package has been updated:
$ uname -r
4.0.2-1-xps13-alt
The output of amixer is identical to before. However, there are now two headphone channels visible in alsamixer, which were not present under the stock kernel.
┌─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
│ Card: HDA Intel PCH F1: Help │
│ Chip: Realtek ALC3263 F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: Headphone Mic [dB gain: -16.50, -16Esc: Exit │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ ├──┤ ├──┤ ├──┤ └──┘ ├──┤ └──┘ ├──┤ │
│ │OO│ │OO│ │OO│ │OO│ │OO│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 100 100<>100 20<>20 100<>100 100<>100 100<>100 100<>100 │
│ Master Headphon<Headphon>Headphon Speaker PCM Beep │
│ │
│ │
│
The channel which is set at 20 gives a continuous "beep" (sine tone?) through headphones, when they are plugged into the jack.
This is the other sound card visible in alsamixer (and the one that is displayed by default):
┌─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
│ Card: HDA Intel HDMI F1: Help │
│ Chip: Intel Broadwell HDMI F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: S/PDIF Esc: Exit │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ ┌───── Sound Card ──────┐ │
│ │- (default) │ │
│ │0 HDA Intel HDMI │ │
│ │1 HDA Intel PCH │ │
│ │ enter device name...│ │
│ └───────────────────────┘ │
│ < S/PDIF >S/PDIF 1 S/PDIF 2 │
│ │
│ │
─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
│ Card: HDA Intel HDMI F1: Help │
│ Chip: Intel Broadwell HDMI F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: S/PDIF Esc: Exit │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ │
│ │OO│ │OO│ │OO│ │
│ └──┘ └──┘ └──┘ │
│ < S/PDIF >S/PDIF 1 S/PDIF 2 │
│ │
The only other thing I have noticed in ~20 minutes of use are some graphical artefacts and flickering that occur with this kernel. I have previously set the Intel graphics acceleration to uxa, as described in the wiki, because of issues with virtual terminals and resuming from suspend. The graphical issues I am currently encountering are very minor, however.
Update:
Thanks to fumlead for this post. The problem seems to have been that the wrong card was set as default. Creating /etc/asound.conf and adding this:
pcm.!default {
type hw
card 1
has solved the problem under both the stock and aur kernels. I am going to stick with the stock kernel because of the graphical issues encountered with the alternate kernel. I am not currently using the audio jack for a microphone, which I believe should work for the alternate kernel but not the stock one.
There is a small bug with the speakers not automatically being silenced when headphones are plugged in, but hopefully that will be fixed in kernel 4.1.
Thank you to everyone who viewed and commented in this thread and special thanks to fumlead.
Last edited by lkarunan (2015-05-17 13:41:23) -
Hi everyone!
I recently moved from Ubuntu to Arch (Yeah!). Everything was fine, the installation was quite easy and I found everything I needed with on the official repos and AUR.
I only have one major problem: There is absolutely no sound in my browser (I tried both Firefox and Chromium). The problem is not only with flash, html5 audio does not work either.
The sound works in vlc, xmms2 and everything else, except for the browsers. I tried to figure out the problem for hours, looking in many forums and installing different packages.
I don't know where to go now. I don't really understand how do sound works in Linux and I don't know which information I should give here and where to find it.
Does anyone have an idea ? Which information should I dump here to help ?
Thanks !
Last edited by lracicot (2013-05-04 05:50:15)Ok I solve my problem.
I have two sound card: "Generic" (HDMI) and "Generic_1" (Analog). The "alsa: default" device was set to "Generic".
I only changed the "alsa: default" device to use "Generic_1".
This post really helped my: https://bbs.archlinux.org/viewtopic.php?id=121049
Maybe you are looking for
-
Anyone know why this happened after last photoshop update?
-
I am unable to open pictures on my iphone5 through the texts?
I have resarted my phone I have ensureed that the MMS is chosen nothing happens when I tap on or hold the picture in the text
-
Display Shopping cart of other Users in SRM 7.0
Hi Experts, I saw that, we can only see ours Shopping Carts only and not other Users in SRM 7.0 in POWL. Can it possible to see others Shopping Cart ? If yes How ? and where is setting ? Thanks NAP
-
Mapping question: How to display only hole numbers..??
Hi all I have 3 fields in my message mapping where I need to convert them to hole numbers. This includes Invoice amount, Brutto and Netto weight. If Invoice amount says '2300.30' in my IDoc it should be '2300' in the xml document. If amount says '230
-
Can the JComboBox 'arrow' be enclosed in a border ?
I am displaying the 'arrow' background in a different color than the background of the list portion of a JComboBox. It would look a lot better if I could put a border around the arrow. I have seen this done by implementing your own ComboBox, but I wa