[SOLVED] No sound in KDE

I've installed KDE Plasma and I have no sound via HDMI. I am using a NVIDIA card. For the record, sound works out of the box with GNOME.
Output of aplay -l:
card 0: MID [HDA Intel MID], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
GNOME lists HDMI 2 as the proper device. However, using aplay to any of these devices yields no sound. Any ideas? Thanks in advance.
Edit
Using speaker-test -c 2 -D hw:1,7 does give me sound.
Last edited by jfarthing84 (2015-04-19 22:42:18)

Plain ALSA at the moment. Just wanted to get that working before introducing other layers, like Pulseaudio.
Multimedia settings only has "Default" as a selection.
I've actually configured it as the default device just after posting the OP. However, no difference.
aplay -l:
card 0: NVidia [HDA NVidia], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: NVidia [HDA NVidia], device 9: HDMI 3 [HDMI 3]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: MID [HDA Intel MID], device 0: ALC262 Analog [ALC262 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0

Similar Messages

  • [SOLVED] gnome update killed sound on kde 4.9.2 system

    the recent gnome-updates in testing seem to have broken my sound on kde 4.9.2. My sound system relied on pulseaudio, phonon-gstreeamer and gstreamer0.10. Since the update there ist only a 'dummy' entry in my soundmixer and no sound anymore. Did anybody experience the same?
    Edit: Just downgraded with pacman -Syuu with all testing repos disabled. Sound is there again. This IS an update problem.
    Harvey
    Last edited by Harey (2012-11-08 08:40:19)

    dolby wrote:Can you post a list of packages you upgraded to/downgraded from testing?
    I deleted pacman.log after a lot of testing, removing and up- and downgrading because it was quite unreadable at that time.
    But if I enable the testing repos again, pacman -Syu wants to upgrade these packages:
    Pakete (40): at-spi2-atk-2.6.1-1  at-spi2-core-2.6.1-1  atk-2.6.0-1  cairo-1.12.4-1  clementine-1.1.0rc1-1  colord-0.1.23-1  dconf-0.14.0-1       
                 device-mapper-2.02.98-1  e2fsprogs-1.42.6-1  farstream-0.2.1-1  gdk-pixbuf2-2.26.4-1  glib-networking-2.34.0-1  glib2-2.34.1-1       
                 glibmm-2.33.14-1  gnome-icon-theme-3.6.0-1  gnome-icon-theme-symbolic-3.6.0-1  gsettings-desktop-schemas-3.6.0-1  gtk3-3.6.1-1       
                 gvfs-1.14.0-1  iproute2-3.6.0-2  iptables-1.4.16.2-1  iputils-20121011-1  kdebase-workspace-4.9.2-5  libcroco-0.6.7-1                 
                 libgnome-keyring-3.6.0-1  libnice-0.1.3-1  librsvg-2.36.4-1  libsoup-2.40.1-1  libsoup-gnome-2.40.1-1  libxklavier-5.3-1             
                 lvm2-2.02.98-1  nvidia-304.60-1  nvidia-ck-corex-304.60-1  nvidia-utils-304.60-1  pango-1.32.1-1  polkit-0.107-4                     
                 telepathy-farstream-0.6.0-1  telepathy-glib-0.20.0-1  tzdata-2012g-1  udisks2-1.99.0-1   
    Maybe this helps.
    Harvey

  • No sound at KDE Startup

    Until yesterday my sound worked fine, both at KDE startup and in KDE. After Syu'ing yesterday no sound at KDE startup. However, sound works to extent that aplay plays .wav files. Suspecting that the upgrade altered a config file, I checked the alsa config files and nothing had changed. I don't know where to look in KDE itself other than the sound section, which was also unchanged.
    No big deal, upgrading is always a digital experiment. Just curious.
    Any intel would be most appreciated.

    rls wrote:
    dp:
    Correct, arts is running and sound is working. After a bit more research, I realize that I have not stated my question precisely. It is a Systems Notifications issue. None of the System Notifications using sound work, not just the startup sound.
    Many thanks for your efforts.
    he he .. ups, i was thinking that arts do not work and you have no sounds in kde --- can be my bad english or not so exact reading :-)
    Control>Sounds & Multimedia>System Notifications>KDE System Notifications
    is the only thing to set notifications in kde, but it is a tricky one (the UI is not well made):
    - check if the volume is set ok: in the "Configure - System Notifiactions" check under the button "Player Settings..." if your volume is not muted (you do not need other player)
    - if you select a notification that has sound set ... if you click on the button to test sound, does it work? ... check if the files exist
    else i dont know what to try to check why it is not working right ... arts works, so it's not a backend problem ... but a kde-one :-(

  • [SOLVED] No Sound After Installing KDE

    After installing KDE I have no sound.
    Results of commands
    lspci | grep Audio
    gives
    00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 01)
    and
    aplay -l
    gives
    aplay: device_list:256: no soundcards found...
    Can someone help?
    Last edited by vujke (2012-11-13 12:14:52)

    Morn wrote:First I would run "lsmod" to check if the snd kernel modules are loaded…
    Module Size Used by
    rfcomm 33791 4
    bnep 8857 2
    snd_hda_codec_realtek 61193 1
    btusb 12372 0
    bluetooth 192120 22 bnep,btusb,rfcomm
    snd_hda_intel 26180 0
    snd_hda_codec 98033 2 snd_hda_codec_realtek,snd_hda_intel
    rfkill 15604 2 bluetooth
    snd_hwdep 6300 1 snd_hda_codec
    snd_pcm 75167 2 snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    coretemp 6070 0
    kvm_intel 124749 0
    kvm 373917 1 kvm_intel
    snd_timer 18934 1 snd_pcm
    snd 59989 6 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5442 1 snd
    ppdev 5902 0
    psmouse 71909 0
    microcode 12377 0
    parport_pc 30541 0
    acpi_cpufreq 5933 1
    mperf 1267 1 acpi_cpufreq
    processor 26855 1 acpi_cpufreq
    serio_raw 4689 0
    pcspkr 1899 0
    iTCO_wdt 5255 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    lpc_ich 10609 0
    parport 31363 2 ppdev,parport_pc
    atl1c 33646 0
    asus_atk0110 9824 0
    evdev 10266 4
    fuse 69173 8
    vboxdrv 1823469 0
    ext4 440434 2
    crc16 1359 2 ext4,bluetooth
    jbd2 78751 1 ext4
    mbcache 5977 1 ext4
    sr_mod 14823 0
    cdrom 35520 1 sr_mod
    sd_mod 29559 7
    ata_generic 3338 0
    pata_acpi 3451 0
    uhci_hcd 23436 0
    ata_piix 23352 5
    libata 167683 3 pata_acpi,ata_generic,ata_piix
    scsi_mod 133386 3 libata,sd_mod,sr_mod
    ehci_hcd 41816 0
    usbcore 150398 3 btusb,uhci_hcd,ehci_hcd
    usb_common 954 1 usbcore
    i915 495073 2
    video 11276 1 i915
    button 4662 1 i915
    i2c_algo_bit 5391 1 i915
    intel_agp 10744 1 i915
    intel_gtt 15659 3 i915,intel_agp
    drm_kms_helper 32877 1 i915
    drm 218724 3 i915,drm_kms_helper
    i2c_core 20707 4 drm,i915,drm_kms_helper,i2c_algo_bit
    I would say it is.
    Morn wrote:
    By the way, I'm also having audio issues with KDE 4.9.3 now. I can play sound though, it's the mixer that's broken.
    P.S. I could fix my issue in the KMix preferences. (The wrong audio interface had been selected since the upgrade.)
    Do you think on Phonon preferences. If is, I got nothing to select.
    Last edited by vujke (2012-11-11 22:50:35)

  • [SOLVED] [no actual solution inside] No sound in KDE 4.1 beta

    Installed KDE 4.1 beta as found here
    There is no sound and device list in KDE control center shows ESD
    I installed pulseaudio and added it and esd in the deamons in rc.conf and added the user in the groups and added the auth file in home
    Now the module shows both ESD and the hardware device and still there is no sound
    Any clue ?
    EDIT
    No miracle with the speakers being plugged in the microphone port
    Last edited by 11010010110 (2008-07-20 13:26:02)

    Try the latest RC and make sure to have phonon installed.

  • No sound in KDE [Solved]

    Hello.
    The sound doesn't work after installing KDE, and I don't know what's the problem.
    When I log in, a message appears. It says something about HDA Intel (ALC1200 Analog).
    I wrote these commands in a terminal:
    $ lsmod | grep '^snd'
    snd_seq_dummy 1119 0
    snd_seq_oss 25232 0
    snd_seq_midi_event 4568 1 snd_seq_oss
    snd_seq 41912 5 snd_seq_dummy,snd_seq_oss,snd_seq_midi_event
    snd_seq_device 4409 3 snd_seq_dummy,snd_seq_oss,snd_seq
    snd_pcm_oss 33950 0
    snd_mixer_oss 15366 1 snd_pcm_oss
    snd_hda_codec_realtek 224540 1
    snd_hda_intel 18988 0
    snd_hda_codec 64796 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 4804 1 snd_hda_codec
    snd_pcm 59496 3 snd_pcm_oss,snd_hda_intel,snd_hda_codec
    snd_timer 15687 2 snd_seq,snd_pcm
    snd 43987 11 snd_seq_oss,snd_seq,snd_seq_device,snd_pcm_oss,snd_mixer_oss,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc 6021 2 snd_hda_intel,snd_pcm
    $ ls -l /dev/snd/
    total 0
    drwxr-xr-x 2 root root 60 mar 3 21:23 by-path
    crw-rw----+ 1 root audio 116, 9 mar 3 21:23 controlC0
    crw-rw----+ 1 root audio 116, 8 mar 3 21:23 hwC0D2
    crw-rw----+ 1 root audio 116, 7 mar 3 21:23 pcmC0D0c
    crw-rw----+ 1 root audio 116, 6 mar 3 21:23 pcmC0D0p
    crw-rw----+ 1 root audio 116, 5 mar 3 21:23 pcmC0D1c
    crw-rw----+ 1 root audio 116, 4 mar 3 21:23 pcmC0D1p
    crw-rw----+ 1 root audio 116, 3 mar 3 21:23 pcmC0D2c
    crw-rw----+ 1 root audio 116, 10 mar 3 21:23 seq
    crw-rw----+ 1 root audio 116, 2 mar 3 21:23 timer
    Last edited by Ignatius881 (2011-03-04 12:54:39)

    Things to check -
    check alsa settings as regular user
    $ alsamixer
    unmute any with "m" and adjust sound up on things like master, speaker, pcm
    if you make changes then, as root
    # alsactl store
    in KDE
    Settings>System Settings>Multimedia
    Check Phonon>device preferences. Ensure that your sound card is at the top of the list. Use the test button here if you wish.
    Check that you have a backend for Phonon. I use phonon-vlc. Install with pacman if you need it.
    Post back and let us know:)

  • (Solved) one sound application at a time

    hello,archers! I moved from gnome to Kde(at last) and faced the issue. E.G if amarok plays musik there's no system notifications and smplayer plays no sound t.i only one programm can use alsa at a time. I have latest kde, alsa and gstreamer and xine backends for phonon. alsamixer shows everything's ok. What should  I do? thnx.
    Last edited by off220 (2011-01-15 10:30:01)

    Ok. I've been able to solve the problem by creating /home/user/.asoundrc file with this content
    pcm.softvolPhonon {           
        type softvol             
        slave.pcm "default:CARD=0"
        control {                 
            name "Phonon"         
            card 0               
        min_dB -51.0             
        max_dB 0.0               
        resolution 100           
        hint {                   
            show on               
            description "My Soundcard with extra Volume Control"
    Then I just choose Phonon as the mail output in sound preferences. Solved.

  • [Solved] White screen after KDE 4.11.1 upgrade

    Hi!
    I updated the system going from KDE 4.11.0 to KDE 4.11.1. On reboot I got the correct loading of KDM, but upon arrival on the desktop the latter is presented fully white with big red button with an "X" in them. Thinking it was the configuration of kde, I deleted .kde4 with the effect that the next time I always white screen (that is only the red buttons have disappeared).
    I try to remove completely kde with:
    pacman -Rsnc kde
    and seeing that reinstalling I get the same result, I also tried to clean up the cache pacman packages listed by the command:
    ls kde*4.11.1*
    so I redownload and reinstalled with:
    pacman -Syu kde
    without solution. I also tried to do what is recommended in the wiki, that is in addition to eliminating .kde4, I run:
    $ rm ~/.config/Trolltech.conf
    $ kbuildsycoca4 --noincremental
    without solution.
    Thinking then it might be the partition / almost full, I checked with:
    df
    but the partition is not filled even for half of the 30gb that is available.
    I checked some logs and these are the outputs:
    .xsession-errors
    > http://pastebin.com/GESX81PV
    boot.log
    [[32m OK [0m] Started Load Kernel Modules.
    Mounting Configuration File System...
    [[32m OK [0m] Mounted Configuration File System.
    [[32m OK [0m] Found device SAMSUNG_SSD_830_Series.
    Mounting /Windows...
    Mounting FUSE Control File System...
    [[32m OK [0m] Mounted FUSE Control File System.
    [[32m OK [0m] Mounted /Windows.
    [[32m OK [0m] Found device WDC_WD10EALX-009BA0.
    Mounting /Dati...
    [[32m OK [0m] Mounted /Dati.
    [[32m OK [0m] Reached target Local File Systems.
    Starting Trigger Flushing of Journal to Persistent Storage...
    Starting Recreate Volatile Files and Directories...
    Starting Tell Plymouth To Write Out Runtime Data...
    [[32m OK [0m] Reached target Bluetooth.
    [[32m OK [0m] Started Trigger Flushing of Journal to Persistent Storage.
    [[32m OK [0m] Started Recreate Volatile Files and Directories.
    Starting Update UTMP about System Reboot/Shutdown...
    [[32m OK [0m] Started Update UTMP about System Reboot/Shutdown.
    [[32m OK [0m] Started Show Plymouth Boot Screen.
    [[32m OK [0m] Started Tell Plymouth To Write Out Runtime Data.
    [[32m OK [0m] Reached target System Initialization.
    [[32m OK [0m] Listening on CUPS Printing Service Sockets.
    [[32m OK [0m] Reached target Paths.
    [[32m OK [0m] Listening on D-Bus System Message Bus Socket.
    [[32m OK [0m] Reached target Sockets.
    [[32m OK [0m] Reached target Timers.
    Starting Restore Sound Card State...
    [[32m OK [0m] Reached target Basic System.
    Starting Network Manager...
    Starting CUPS Printing Service...
    [[32m OK [0m] Started CUPS Printing Service.
    Starting Catalyst's fglrx kernel' module builder...
    Starting Login Service...
    Starting D-Bus System Message Bus...
    [[32m OK [0m] Started D-Bus System Message Bus.
    Starting Permit User Sessions...
    [[32m OK [0m] Started Permit User Sessions.
    Starting Wait for Plymouth Boot Screen to Quit...
    Starting K Display Manager...
    [[32m OK [0m] Started K Display Manager.
    [[32m OK [0m] Started Catalyst's fglrx kernel' module builder.
    [[32m OK [0m] Reached target Sound Card.
    [[32m OK [0m] Started Restore Sound Card State.
    [[32m OK [0m] Started Login Service.
    Starting Manage, Install and Generate Color Profiles...
    Starting Authorization Manager...
    [[32m OK [0m] Started Manage, Install and Generate Color Profiles.
    [[32m OK [0m] Started Authorization Manager.
    [[32m OK [0m] Started Network Manager.
    [[32m OK [0m] Reached target Network.
    Starting Network Time Service...
    [[32m OK [0m] Started Network Time Service.
    [[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[[31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[ [31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[ [31m*[1;31m*[0m[31m* [0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K Starting Daemon for power management...
    [[32m OK [0m] Started Daemon for power management.
    Starting Disk Manager...
    [[32m OK [0m] Started Disk Manager.
    [ [31m*[1;31m*[0m[31m*[0m] A start job is running for Wait for Plymouth Boot Screen to Quit
    [K[[1;31mFAILED[0m] Failed to start Wait for Plymouth Boot Screen to Quit.
    See 'systemctl status plymouth-quit-wait.service' for details.
    Starting Getty on tty1...
    [[32m OK [0m] Started Getty on tty1.
    [[32m OK [0m] Reached target Login Prompts.
    [[32m OK [0m] Reached target Multi-User System.
    [[32m OK [0m] Reached target Graphical Interface.
    [[32m OK [0m] Stopped target Sound Card.
    [[32m OK [0m] Stopped target Bluetooth.
    Stopping Disk Manager...
    Stopping Daemon for power management...
    Stopping Authorization Manager...
    Stopping Manage, Install and Generate Color Profiles...
    Stopping CUPS Printing Service...
    [[32m OK [0m] Stopped target Graphical Interface.
    [[32m OK [0m] Stopped target Multi-User System.
    Stopping Network Time Service...
    Stopping Catalyst's fglrx kernel' module builder...
    Stopping Login Service...
    Stopping D-Bus System Message Bus...
    [[32m OK [0m] Stopped target Login Prompts.
    Stopping Getty on tty1...
    Stopping K Display Manager...
    [[32m OK [0m] Stopped K Display Manager.
    [[32m OK [0m] Stopped Daemon for power management.
    [[32m OK [0m] Stopped Getty on tty1.
    [[32m OK [0m] Stopped D-Bus System Message Bus.
    [[32m OK [0m] Stopped Disk Manager.
    Stopping Permit User Sessions...
    [[32m OK [0m] Stopped Authorization Manager.
    [[32m OK [0m] Stopped Network Time Service.
    [[32m OK [0m] Stopped target Network.
    Stopping Network Manager...
    [[32m OK [0m] Stopped Manage, Install and Generate Color Profiles.
    [[32m OK [0m] Stopped Catalyst's fglrx kernel' module builder.
    [[32m OK [0m] Stopped Login Service.
    [[32m OK [0m] Stopped Network Manager.
    [[32m OK [0m] Stopped CUPS Printing Service.
    [[32m OK [0m] Stopped Permit User Sessions.
    [[32m OK [0m] Stopped target Basic System.
    [[32m OK [0m] Stopped target Paths.
    [[32m OK [0m] Stopped target Timers.
    [[32m OK [0m] Stopped target Sockets.
    [[32m OK [0m] Closed CUPS Printing Service Sockets.
    [[32m OK [0m] Closed LVM2 metadata daemon socket.
    [[32m OK [0m] Closed /dev/initctl Compatibility Named Pipe.
    [[32m OK [0m] Closed Delayed Shutdown Socket.
    [[32m OK [0m] Closed Device-mapper event daemon FIFOs.
    [[32m OK [0m] Closed udev Control Socket.
    [[32m OK [0m] Closed D-Bus System Message Bus Socket.
    [[32m OK [0m] Stopped target System Initialization.
    Unmounting Debug File System...
    Unmounting FUSE Control File System...
    Stopping Update UTMP about System Reboot/Shutdown...
    Unmounting POSIX Message Queue File System...
    Unmounting Huge Pages File System...
    Stopping Setup Virtual Console...
    [[32m OK [0m] Stopped Setup Virtual Console.
    [[32m OK [0m] Unset automount Arbitrary Executable File Formats File System Automount Point.
    Stopping Apply Kernel Variables...
    [[32m OK [0m] Stopped Apply Kernel Variables.
    Unmounting Configuration File System...
    [[32m OK [0m] Stopped target Encrypted Volumes.
    [[32m OK [0m] Stopped target Swap.
    [[32m OK [0m] Stopped target Local File Systems.
    Unmounting /Windows...
    Unmounting /Dati...
    Unmounting Temporary Directory...
    Stopping Journal Service...
    [[32m OK [0m] Stopped target Remote File Systems.
    [[32m OK [0m] Stopped Update UTMP about System Reboot/Shutdown.
    [[32m OK [0m] Unmounted Temporary Directory.
    [[32m OK [0m] Unmounted POSIX Message Queue File System.
    [[32m OK [0m] Unmounted FUSE Control File System.
    [[32m OK [0m] Unmounted Huge Pages File System.
    [[32m OK [0m] Unmounted Configuration File System.
    Stopping Load Kernel Modules...
    [[32m OK [0m] Stopped Load Kernel Modules.
    [[32m OK [0m] Unmounted Debug File System.
    [[32m OK [0m] Unmounted /Windows.
    [[32m OK [0m] Unmounted /Dati.
    [[32m OK [0m] Reached target Unmount All Filesystems.
    [[32m OK [0m] Stopped target Local File Systems (Pre).
    Stopping Remount Root and Kernel File Systems...
    [[32m OK [0m] Stopped Remount Root and Kernel File Systems.
    [[32m OK [0m] Stopped Journal Service.
    [[32m OK [0m] Closed Journal Socket.
    Starting Show Plymouth Reboot Screen...
    Starting Store Sound Card State...
    Unmounting /...
    [[32m OK [0m] Started Store Sound Card State.
    [[32m OK [0m] Reached target Shutdown.
    Sending SIGTERM to remaining processes...
    Sending SIGKILL to remaining processes...
    Hardware watchdog 'iTCO_wdt', version 0
    Unmounting file systems.
    All filesystems unmounted.
    Deactivating swaps.
    All swaps deactivated.
    Detaching loop devices.
    All loop devices detached.
    Detaching DM devices.
    All DM devices detached.
    Storage is finalized.
    dmesg
    > http://pastebin.com/fbgh2ayu
    journalctl -p 3 --since=today
    -- Logs begin at mar 2013-07-30 13:16:10 CEST, end at lun 2013-09-16 08:52:14 CEST. --
    set 16 08:43:14 arch dhcpcd[346]: eno1: ipv6rs_sendprobe: sendmsg: Cannot assign requested address
    set 16 08:43:14 arch ntpd_intres[338]: host name not found: 0.pool.ntp.org
    set 16 08:43:14 arch ntpd_intres[338]: host name not found: 1.pool.ntp.org
    set 16 08:43:14 arch ntpd_intres[338]: host name not found: 2.pool.ntp.org
    set 16 08:43:14 arch ntpd_intres[338]: host name not found: 3.pool.ntp.org
    set 16 08:43:18 arch ntpd_intres[338]: host name not found: 0.pool.ntp.org
    set 16 08:43:18 arch ntpd_intres[338]: host name not found: 1.pool.ntp.org
    set 16 08:43:18 arch ntpd_intres[338]: host name not found: 2.pool.ntp.org
    set 16 08:43:18 arch ntpd_intres[338]: host name not found: 3.pool.ntp.org
    set 16 08:45:03 arch login[308]: pam_systemd(login:session): Failed to connect to system bus: Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
    set 16 08:45:04 arch kdm[351]: :0[351]: pam_systemd(kde:session): Failed to connect to system bus: Failed to connect to socket /run/dbus/system_bus_socket: Connection refused
    set 16 08:45:04 arch kdm[351]: :0[351]: pam_close_session() failed: Cannot make/remove an entry for the specified session
    set 16 08:45:04 arch systemd-coredump[1103]: Process 309 (X) dumped core.
    [1;39m-- Reboot --[0m
    set 16 08:46:11 arch dhcpcd[346]: eno1: ipv6rs_sendprobe: sendmsg: Cannot assign requested address
    set 16 08:46:12 arch ntpd_intres[337]: host name not found: 0.pool.ntp.org
    set 16 08:46:12 arch ntpd_intres[337]: host name not found: 1.pool.ntp.org
    set 16 08:46:12 arch ntpd_intres[337]: host name not found: 2.pool.ntp.org
    set 16 08:46:12 arch ntpd_intres[337]: host name not found: 3.pool.ntp.org
    set 16 08:46:16 arch ntpd_intres[337]: host name not found: 0.pool.ntp.org
    set 16 08:46:16 arch ntpd_intres[337]: host name not found: 1.pool.ntp.org
    set 16 08:46:16 arch ntpd_intres[337]: host name not found: 2.pool.ntp.org
    set 16 08:46:16 arch ntpd_intres[337]: host name not found: 3.pool.ntp.org
    set 16 08:48:02 arch login[305]: pam_tally(login:auth): pam_get_uid; no such user
    kdm.log
    > http://pastebin.com/zmgj4AGq
    Xorg.0.log has no errors.
    How can I resolve it?
    Thanks
    Last edited by Fregtux (2013-09-20 08:35:13)

    Fregtux wrote:
    Thanks Thaodan! I deleted /var/tmp/kdecache-$USER and I solve the problem! I also restore .kde4_backup and at the moment have no issue.
    Small question: I noticed that there are also kdecache-kdm and kdecache-root. I should remove it or doesn't matter?
    Thanks for the help!
    THANKS, my White Screen was caused by a combination of issues but this solution worked for me.
    My Problem -
    I am not sure exactly what caused my white screen, I was playing around with /etc/profile & /etc/sudoers
    What I changed -
    sudoers - I added my user group to sudoers and allowed sudo to execute applications using xauth in home dir
    profile - changed umask to 133 ( I hate execute bit ) and default text editor to nano
    What Happened -
    Tried to reload via source but no changes where taking effect so I rebooted. 
    Upon reboot I could not login to KDE, it would keep looping back to the KDM after I entered by password for my user, however it would let me login as root ( after I enabled root login ).
    I figured this was a permission issue so I changed umask back to 022 in /etc/profile, I was then greeted with the White Screen after login.  I read numerous posts about how to fix this, most said to reinstall kde and delete /tmp, none of this worked.
    I deleted /var/tmp/kdecache-$USER and now I am back in business ( I had to re set the widgets, i.e. panel ).
    I was so excited that I had to write a post about it!
    Thanks again!

  • [SOLVED] No sound through usb soundcard in Google Chromium

    Hi there,
    Before switching to Arch I had used my external usb soundcard in Ubuntu and Kubuntu which worked almost flawlessly except for no sound through Google Chromium in Kubuntu. I thought this may have been isolated when switching KDE on Arch but I'm stilling having the same problem. All audio works through the external soundcard except for Chromium.
    Does anyone know how I can change sound preferences in Chromium or other way to solve this problem?
    Thanks,
    Last edited by bennylb0 (2010-06-02 06:04:14)

    Not sure exactly what I did but I fiddled with the default soundcard configuration and now it works.

  • [SOLVED] No sound in skype nor grooveshark but in phonon

    I am stuck with this problem. I've tried it all without success.. (arch forums, google, ...)
    I have snd-had-intel installed and in phonon (KDE) i can hear the sound. However, if I open grooveshark or skype, there is no sound. The most strange is that it actually worked several days before..
    #aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC888 Analog [ALC888 Analog]
      Subdevices: 0/1
      Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 1: ALC888 Digital [ALC888 Digital]
      Subdevices: 0/1
      Subdevice #0: subdevice #0
    #lsmod | grep '^snd' | column -t
    snd_hda_codec_realtek  282024  1
    snd_hda_intel          22410   4
    snd_hda_codec          80889   2   snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep              6357    1   snd_hda_codec
    snd_pcm                74304   3   snd_hda_intel,snd_hda_codec
    snd_timer              19544   2   snd_pcm
    snd                    58362   12  snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    snd_page_alloc         7153    2   snd_hda_intel,snd_pcm
    #ls -l /dev/snd/
    total 0
    drwxr-xr-x  2 root root       60 Nov 10 12:12 by-path
    crw-rw---T+ 1 root audio 116,  7 Nov 10 12:12 controlC0
    crw-rw---T+ 1 root audio 116,  6 Nov 10 12:12 hwC0D0
    crw-rw---T+ 1 root audio 116,  5 Nov 10 12:12 pcmC0D0c
    crw-rw---T+ 1 root audio 116,  4 Nov 10 12:13 pcmC0D0p
    crw-rw---T+ 1 root audio 116,  3 Nov 10 12:12 pcmC0D1p
    crw-rw---T+ 1 root audio 116,  2 Nov 10 12:12 pcmC0D2c
    crw-rw---T  1 root audio 116,  1 Nov 10 12:12 seq
    crw-rw---T+ 1 root audio 116, 33 Nov 10 12:12 timer
    Alsamixer also behaves quite strange. The volume is always down (anyway, increasing all the parameters doesn't solve anything).
    What can be the problem?
    Thanks in advance!
    Last edited by mabuse (2011-11-10 15:57:04)

    I've solved the issue uninstalling pulseaudio and instaling OSS. Now all is going flawlessly

  • [solved] Xorg-1.8 + KDE on Asus 1201n : dupplicated Fn key event

    Hello,
    after upgrading to Xorg 1.8 one week ago, I noticed that my Fn keys (sound up/down, mute) were dupplicated. For example, if I press Fn+F10 (=MUTE/Unmute), the sound get muted and immediately unmuted.
    Moreover,
    My xorg.conf:
    Section "ServerLayout"
    Identifier "Layout0"
    Screen 0 "Screen0" 0 0
    EndSection
    Section "Monitor"
    Identifier "Monitor0"
    VendorName "Unknown"
    ModelName "Unknown"
    HorizSync 28.0 - 33.0
    VertRefresh 43.0 - 72.0
    Option "DPMS"
    EndSection
    Section "Screen"
    Identifier "Screen0"
    Device "Device0"
    Monitor "Monitor0"
    DefaultDepth 24
    SubSection "Display"
    Depth 24
    EndSubSection
    EndSection
    10-evdev.conf:
    # Catchall classes for input devices
    # We don't simply match on any device since that also adds accelerometers
    # and other devices that we don't really want to use. The list below
    # matches everything but joysticks.
    Section "InputClass"
    Identifier "evdev pointer catchall"
    MatchIsPointer "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    Section "InputClass"
    Identifier "evdev keyboard catchall"
    MatchIsKeyboard "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    Option "XkbLayout" "ch"
    Option "XkbVariant" "fr"
    Option "XkbOptions" "terminate:ctrl_alt_bksp"
    EndSection
    Section "InputClass"
    Identifier "evdev touchpad catchall"
    MatchIsTouchpad "on"
    MatchDevicePath "/dev/input/event*"
    Driver "evdev"
    EndSection
    And the Xorg.0.log file, we can see that the keyboard is added twice...
    [ 19.593] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Jun 30 09:48:01 2010
    [ 19.649] (==) Using config file: "/etc/X11/xorg.conf"
    [ 19.649] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 19.719] (==) ServerLayout "Layout0"
    [ 19.720] (**) |-->Screen "Screen0" (0)
    [ 19.720] (**) | |-->Monitor "Monitor0"
    [ 19.720] (**) | |-->Device "Device0"
    [ 19.720] (==) Automatically adding devices
    [ 19.720] (==) Automatically enabling devices
    [ 19.780] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 19.780] Entry deleted from font path.
    [ 19.804] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 19.804] Entry deleted from font path.
    [ 19.804] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 19.804] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 19.804] Entry deleted from font path.
    [ 19.804] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 19.804] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/
    [ 19.804] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 19.804] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 19.805] (II) Loader magic: 0x7ce880
    [ 19.805] (II) Module ABI versions:
    [ 19.805] X.Org ANSI C Emulation: 0.4
    [ 19.805] X.Org Video Driver: 7.0
    [ 19.805] X.Org XInput driver : 9.0
    [ 19.805] X.Org Server Extension : 3.0
    [ 19.819] (--) PCI: (0:0:3:5) 10de:0aa3:1043:8402 nVidia Corporation MCP79 Co-processor rev 177, Mem @ 0xf9f80000/524288
    [ 19.819] (--) PCI:*(0:5:0:0) 10de:0876:1043:8402 nVidia Corporation ION VGA [GeForce 9400M] rev 177, Mem @ 0xfa000000/16777216, 0xe0000000/268435456, 0xf6000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
    [ 19.820] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 19.820] (II) LoadModule: "extmod"
    [ 19.864] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 19.872] (II) Module extmod: vendor="X.Org Foundation"
    [ 19.872] compiled for 1.8.1.902, module version = 1.0.0
    [ 19.872] Module class: X.Org Server Extension
    [ 19.872] ABI class: X.Org Server Extension, version 3.0
    [ 19.872] (II) Loading extension MIT-SCREEN-SAVER
    [ 19.872] (II) Loading extension XFree86-VidModeExtension
    [ 19.872] (II) Loading extension XFree86-DGA
    [ 19.872] (II) Loading extension DPMS
    [ 19.872] (II) Loading extension XVideo
    [ 19.872] (II) Loading extension XVideo-MotionCompensation
    [ 19.872] (II) Loading extension X-Resource
    [ 19.872] (II) LoadModule: "dbe"
    [ 19.873] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 19.879] (II) Module dbe: vendor="X.Org Foundation"
    [ 19.879] compiled for 1.8.1.902, module version = 1.0.0
    [ 19.879] Module class: X.Org Server Extension
    [ 19.879] ABI class: X.Org Server Extension, version 3.0
    [ 19.879] (II) Loading extension DOUBLE-BUFFER
    [ 19.879] (II) LoadModule: "glx"
    [ 19.879] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 20.470] (II) Module glx: vendor="NVIDIA Corporation"
    [ 20.479] compiled for 4.0.2, module version = 1.0.0
    [ 20.479] Module class: X.Org Server Extension
    [ 20.479] (II) NVIDIA GLX Module 256.35 Wed Jun 16 19:10:31 PDT 2010
    [ 20.480] (II) Loading extension GLX
    [ 20.480] (II) LoadModule: "record"
    [ 20.480] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 20.490] (II) Module record: vendor="X.Org Foundation"
    [ 20.490] compiled for 1.8.1.902, module version = 1.13.0
    [ 20.490] Module class: X.Org Server Extension
    [ 20.490] ABI class: X.Org Server Extension, version 3.0
    [ 20.491] (II) Loading extension RECORD
    [ 20.491] (II) LoadModule: "dri"
    [ 20.491] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 20.527] (II) Module dri: vendor="X.Org Foundation"
    [ 20.527] compiled for 1.8.1.902, module version = 1.0.0
    [ 20.527] ABI class: X.Org Server Extension, version 3.0
    [ 20.527] (II) Loading extension XFree86-DRI
    [ 20.527] (II) LoadModule: "dri2"
    [ 20.527] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 20.528] (II) Module dri2: vendor="X.Org Foundation"
    [ 20.528] compiled for 1.8.1.902, module version = 1.2.0
    [ 20.528] ABI class: X.Org Server Extension, version 3.0
    [ 20.528] (II) Loading extension DRI2
    [ 20.528] (II) LoadModule: "nvidia"
    [ 20.539] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 20.600] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 20.604] compiled for 4.0.2, module version = 1.0.0
    [ 20.604] Module class: X.Org Video Driver
    [ 20.640] (II) NVIDIA dlloader X Driver 256.35 Wed Jun 16 18:45:02 PDT 2010
    [ 20.640] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 20.641] (++) using VT number 7
    [ 20.643] (II) Primary Device is: PCI 05@00:00:0
    [ 20.644] (II) Loading sub module "fb"
    [ 20.644] (II) LoadModule: "fb"
    [ 20.644] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 20.657] (II) Module fb: vendor="X.Org Foundation"
    [ 20.657] compiled for 1.8.1.902, module version = 1.0.0
    [ 20.658] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 20.658] (II) Loading sub module "wfb"
    [ 20.658] (II) LoadModule: "wfb"
    [ 20.711] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 20.712] (II) Module wfb: vendor="X.Org Foundation"
    [ 20.712] compiled for 1.8.1.902, module version = 1.0.0
    [ 20.712] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 20.713] (II) Loading sub module "ramdac"
    [ 20.713] (II) LoadModule: "ramdac"
    [ 20.713] (II) Module "ramdac" already built-in
    [ 20.735] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 20.735] (==) NVIDIA(0): RGB weight 888
    [ 20.735] (==) NVIDIA(0): Default visual is TrueColor
    [ 20.735] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 20.735] (**) NVIDIA(0): Option "NoLogo" "true"
    [ 20.735] (**) NVIDIA(0): Option "ConnectedMonitor" "CRT , CRT"
    [ 20.735] (**) NVIDIA(0): Option "TwinView" "TRUE"
    [ 20.736] (**) NVIDIA(0): Option "TwinViewOrientation" "Clone"
    [ 20.736] (**) NVIDIA(0): Option "SecondMonitorHorizSync" "0"
    [ 20.736] (**) NVIDIA(0): Option "SecondMonitorVertRefresh" "0"
    [ 20.736] (**) NVIDIA(0): Enabling RENDER acceleration
    [ 20.736] (**) NVIDIA(0): ConnectedMonitor string: "CRT , CRT"
    [ 20.736] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
    [ 20.736] (II) NVIDIA(0): enabled.
    [ 21.512] (WW) NVIDIA(GPU-0): Invalid ConnectedMonitor request; request was for 'CRT-0,
    [ 21.512] (WW) NVIDIA(GPU-0): CRT-1', but the valid display devices are 'CRT-0, DFP-0,
    [ 21.512] (WW) NVIDIA(GPU-0): DFP-1'.
    [ 21.527] (II) NVIDIA(0): NVIDIA GPU ION (C79) at PCI:5:0:0 (GPU-0)
    [ 21.527] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 21.527] (--) NVIDIA(0): VideoBIOS: 62.79.67.00.00
    [ 21.527] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 21.527] (--) NVIDIA(0): Connected display device(s) on ION at PCI:5:0:0:
    [ 21.527] (--) NVIDIA(0): HSD121PHW1 (DFP-0)
    [ 21.527] (--) NVIDIA(0): HSD121PHW1 (DFP-0): 330.0 MHz maximum pixel clock
    [ 21.527] (--) NVIDIA(0): HSD121PHW1 (DFP-0): Internal Dual Link LVDS
    [ 21.538] (WW) NVIDIA(0): No TwinView "MetaModes" specified; will fall back to Display
    [ 21.538] (WW) NVIDIA(0): SubSection modes.
    [ 21.538] (**) NVIDIA(0): TwinView enabled
    [ 21.538] (WW) NVIDIA(0): TwinView requested, but only 1 display devices found.
    [ 21.569] (II) NVIDIA(0): Assigned Display Device: DFP-0
    [ 21.569] (==) NVIDIA(0):
    [ 21.569] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 21.569] (==) NVIDIA(0): will be used as the requested mode.
    [ 21.569] (==) NVIDIA(0):
    [ 21.569] (II) NVIDIA(0): Validated modes:
    [ 21.569] (II) NVIDIA(0): "nvidia-auto-select"
    [ 21.569] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
    [ 22.632] (--) NVIDIA(0): DPI set to (128, 130); computed from "UseEdidDpi" X config
    [ 22.633] (--) NVIDIA(0): option
    [ 22.633] (==) NVIDIA(0): Enabling 32-bit ARGB GLX visuals.
    [ 22.633] (--) Depth 24 pixmap format is 32 bpp
    [ 22.633] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 22.634] (II) NVIDIA(0): Initialized GPU GART.
    [ 22.641] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 22.641] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 22.641] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 22.641] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 22.641] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 22.641] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 22.641] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 22.641] (II) NVIDIA(0): Config Options in the README.
    [ 22.642] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
    [ 22.642] (II) NVIDIA(0): enough to receive ACPI hotkey events.
    [ 22.642] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
    [ 22.644] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 22.920] (II) Loading extension NV-GLX
    [ 22.960] (II) NVIDIA(0): Initialized OpenGL Acceleration
    [ 22.994] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 22.994] (II) NVIDIA(0): Initialized X Rendering Acceleration
    [ 23.005] (==) NVIDIA(0): Backing store disabled
    [ 23.005] (==) NVIDIA(0): Silken mouse enabled
    [ 23.013] (**) NVIDIA(0): DPMS enabled
    [ 23.043] (II) Loading extension NV-CONTROL
    [ 23.044] (II) Loading extension XINERAMA
    [ 23.044] (II) Loading sub module "dri2"
    [ 23.044] (II) LoadModule: "dri2"
    [ 23.045] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 23.045] (II) NVIDIA(0): [DRI2] Setup complete
    [ 23.045] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 23.045] (==) RandR enabled
    [ 23.045] (II) Initializing built-in extension Generic Event Extension
    [ 23.045] (II) Initializing built-in extension SHAPE
    [ 23.045] (II) Initializing built-in extension MIT-SHM
    [ 23.045] (II) Initializing built-in extension XInputExtension
    [ 23.045] (II) Initializing built-in extension XTEST
    [ 23.045] (II) Initializing built-in extension BIG-REQUESTS
    [ 23.045] (II) Initializing built-in extension SYNC
    [ 23.045] (II) Initializing built-in extension XKEYBOARD
    [ 23.045] (II) Initializing built-in extension XC-MISC
    [ 23.045] (II) Initializing built-in extension SECURITY
    [ 23.045] (II) Initializing built-in extension XINERAMA
    [ 23.045] (II) Initializing built-in extension XFIXES
    [ 23.045] (II) Initializing built-in extension RENDER
    [ 23.045] (II) Initializing built-in extension RANDR
    [ 23.045] (II) Initializing built-in extension COMPOSITE
    [ 23.045] (II) Initializing built-in extension DAMAGE
    [ 23.052] (II) Initializing extension GLX
    [ 23.688] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 23.688] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 23.688] (II) LoadModule: "evdev"
    [ 23.689] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 23.708] (II) Module evdev: vendor="X.Org Foundation"
    [ 23.708] compiled for 1.8.0, module version = 2.4.0
    [ 23.708] Module class: X.Org XInput Driver
    [ 23.708] ABI class: X.Org XInput driver, version 9.0
    [ 23.708] (**) Power Button: always reports core events
    [ 23.708] (**) Power Button: Device: "/dev/input/event4"
    [ 23.720] (II) Power Button: Found keys
    [ 23.720] (II) Power Button: Configuring as keyboard
    [ 23.720] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 23.720] (**) Option "xkb_rules" "evdev"
    [ 23.720] (**) Option "xkb_model" "evdev"
    [ 23.720] (**) Option "xkb_layout" "ch"
    [ 23.720] (**) Option "xkb_variant" "fr"
    [ 23.720] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 23.826] (II) config/udev: Adding input device Video Bus (/dev/input/event8)
    [ 23.826] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 23.826] (**) Video Bus: always reports core events
    [ 23.827] (**) Video Bus: Device: "/dev/input/event8"
    [ 23.873] (II) Video Bus: Found keys
    [ 23.873] (II) Video Bus: Configuring as keyboard
    [ 23.873] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
    [ 23.873] (**) Option "xkb_rules" "evdev"
    [ 23.873] (**) Option "xkb_model" "evdev"
    [ 23.873] (**) Option "xkb_layout" "ch"
    [ 23.873] (**) Option "xkb_variant" "fr"
    [ 23.873] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 23.875] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 23.876] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 23.876] (**) Power Button: always reports core events
    [ 23.876] (**) Power Button: Device: "/dev/input/event3"
    [ 23.900] (II) Power Button: Found keys
    [ 23.900] (II) Power Button: Configuring as keyboard
    [ 23.900] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 23.900] (**) Option "xkb_rules" "evdev"
    [ 23.900] (**) Option "xkb_model" "evdev"
    [ 23.900] (**) Option "xkb_layout" "ch"
    [ 23.900] (**) Option "xkb_variant" "fr"
    [ 23.900] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 23.901] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
    [ 23.901] (II) No input driver/identifier specified (ignoring)
    [ 23.902] (II) config/udev: Adding input device Sleep Button (/dev/input/event2)
    [ 23.902] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 23.902] (**) Sleep Button: always reports core events
    [ 23.902] (**) Sleep Button: Device: "/dev/input/event2"
    [ 23.923] (II) Sleep Button: Found keys
    [ 23.923] (II) Sleep Button: Configuring as keyboard
    [ 23.923] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD)
    [ 23.923] (**) Option "xkb_rules" "evdev"
    [ 23.923] (**) Option "xkb_model" "evdev"
    [ 23.923] (**) Option "xkb_layout" "ch"
    [ 23.923] (**) Option "xkb_variant" "fr"
    [ 23.923] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 23.929] (II) config/udev: Adding input device USB 2.0 PC Cam (/dev/input/event10)
    [ 23.929] (**) USB 2.0 PC Cam: Applying InputClass "evdev keyboard catchall"
    [ 23.929] (**) USB 2.0 PC Cam: always reports core events
    [ 23.929] (**) USB 2.0 PC Cam: Device: "/dev/input/event10"
    [ 23.950] (II) USB 2.0 PC Cam: Found keys
    [ 23.950] (II) USB 2.0 PC Cam: Configuring as keyboard
    [ 23.950] (II) XINPUT: Adding extended input device "USB 2.0 PC Cam" (type: KEYBOARD)
    [ 23.950] (**) Option "xkb_rules" "evdev"
    [ 23.950] (**) Option "xkb_model" "evdev"
    [ 23.950] (**) Option "xkb_layout" "ch"
    [ 23.950] (**) Option "xkb_variant" "fr"
    [ 23.950] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 23.953] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event11)
    [ 23.953] (II) No input driver/identifier specified (ignoring)
    [ 23.961] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event7)
    [ 23.961] (**) Eee PC WMI hotkeys: Applying InputClass "evdev keyboard catchall"
    [ 23.962] (**) Eee PC WMI hotkeys: always reports core events
    [ 23.962] (**) Eee PC WMI hotkeys: Device: "/dev/input/event7"
    [ 23.976] (II) Eee PC WMI hotkeys: Found keys
    [ 23.976] (II) Eee PC WMI hotkeys: Configuring as keyboard
    [ 23.976] (II) XINPUT: Adding extended input device "Eee PC WMI hotkeys" (type: KEYBOARD)
    [ 23.976] (**) Option "xkb_rules" "evdev"
    [ 23.977] (**) Option "xkb_model" "evdev"
    [ 23.977] (**) Option "xkb_layout" "ch"
    [ 23.977] (**) Option "xkb_variant" "fr"
    [ 23.977] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 23.978] (II) config/udev: Adding input device Asus EeePC extra buttons (/dev/input/event9)
    [ 23.978] (**) Asus EeePC extra buttons: Applying InputClass "evdev keyboard catchall"
    [ 23.978] (**) Asus EeePC extra buttons: always reports core events
    [ 23.978] (**) Asus EeePC extra buttons: Device: "/dev/input/event9"
    [ 24.016] (II) Asus EeePC extra buttons: Found keys
    [ 24.016] (II) Asus EeePC extra buttons: Configuring as keyboard
    [ 24.016] (II) XINPUT: Adding extended input device "Asus EeePC extra buttons" (type: KEYBOARD)
    [ 24.016] (**) Option "xkb_rules" "evdev"
    [ 24.016] (**) Option "xkb_model" "evdev"
    [ 24.017] (**) Option "xkb_layout" "ch"
    [ 24.017] (**) Option "xkb_variant" "fr"
    [ 24.017] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 24.018] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 24.018] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 24.018] (**) AT Translated Set 2 keyboard: always reports core events
    [ 24.018] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 24.043] (II) AT Translated Set 2 keyboard: Found keys
    [ 24.043] (II) AT Translated Set 2 keyboard: Configuring as keyboard
    [ 24.043] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
    [ 24.043] (**) Option "xkb_rules" "evdev"
    [ 24.043] (**) Option "xkb_model" "evdev"
    [ 24.043] (**) Option "xkb_layout" "ch"
    [ 24.043] (**) Option "xkb_variant" "fr"
    [ 24.043] (**) Option "xkb_options" "terminate:ctrl_alt_bksp"
    [ 24.044] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
    [ 24.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 24.045] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 24.045] (II) LoadModule: "synaptics"
    [ 24.045] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 24.060] (II) Module synaptics: vendor="X.Org Foundation"
    [ 24.060] compiled for 1.8.0.902, module version = 1.2.2
    [ 24.060] Module class: X.Org XInput Driver
    [ 24.060] ABI class: X.Org XInput driver, version 9.0
    [ 24.060] (II) Synaptics touchpad driver version 1.2.2
    [ 24.060] (**) Option "Device" "/dev/input/event6"
    [ 24.190] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
    [ 24.190] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
    [ 24.190] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 24.190] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
    [ 24.190] (II) SynPS/2 Synaptics TouchPad: buttons: left right
    [ 24.190] (**) Option "SHMConfig" "on"
    [ 24.190] (**) Option "MaxTapMove" "2000"
    [ 24.190] (**) Option "VertEdgeScroll" "on"
    [ 24.190] (**) Option "VertTwoFingerScroll" "on"
    [ 24.190] (**) Option "HorizTwoFingerScroll" "on"
    [ 24.190] (**) Option "TapButton1" "1"
    [ 24.190] (**) Option "CircularScrolling" "on"
    [ 24.296] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 24.296] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 24.350] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
    [ 24.350] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 24.350] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
    [ 24.350] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 24.350] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 24.430] (--) SynPS/2 Synaptics TouchPad: touchpad found
    [ 24.430] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
    [ 24.430] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 24.430] (II) Synaptics touchpad driver version 1.2.2
    [ 26.296] SynPS/2 Synaptics TouchPad no synaptics event device found
    [ 26.296] (**) Option "Device" "/dev/input/mouse0"
    [ 26.323] (**) Option "SHMConfig" "on"
    [ 26.323] (**) Option "MaxTapMove" "2000"
    [ 26.323] (**) Option "VertEdgeScroll" "on"
    [ 26.323] (**) Option "VertTwoFingerScroll" "on"
    [ 26.323] (**) Option "HorizTwoFingerScroll" "on"
    [ 26.323] (**) Option "TapButton1" "1"
    [ 26.323] (**) Option "CircularScrolling" "on"
    [ 26.344] Query no Synaptics: 6003C8
    [ 26.344] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
    [ 26.344] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
    [ 26.386] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
    [ 26.386] (II) UnloadModule: "synaptics"
    [ 26.387] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 26.387] (II) No input driver/identifier specified (ignoring)
    I have not put the 10-synaptic touchpad config file since it works well (Identifier "touchpad catchall" Driver "synaptics").
    Any idea what could be the problem ?
    Last edited by Bluespear (2010-07-18 20:05:16)

    Nothing ?
    Switchng off hal deamon and cleaning ~/.kde* has no effect...
    So, after searching on google again an again, still nothing found.... even among the Ubuntu specific issue where post are terminated
    with "wait next version of the package", the windows-style answer.
    I will continue my attempts to fix this... but my conclusion about this is that hal was more precise in his behavior than udev...

  • [solved] No sound, ALSA finds soundcard, pulseaudio does not.

    Problem:
    pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
    First appeared when:
    Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
    What did not help:
    Reinstalling packets with pulse|alsa|sound|audio in its name.
    Deleting ${HOME}/.pulse* .
    Rebooting.
    Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
    Adding or removing my user to the audio group.
    Googling. Other threads i this forum.
    Additional infos:
    (Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
    /dev/dsp does not exist.
    fuser -v /dev/snd/* returns nothing
    aplay whatever.wav produces no sound.
    aplay -D sysdefault whatever.wav works.
    Using Gnome 3 started with gdm.
    aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=Intel
    HDA Intel, ALC272 Analog
    Default Audio Device
    front:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    Front speakers
    surround40:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Intel,DEV=0
    HDA Intel, ALC272 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=Intel,DEV=0
    HDA Intel, HDMI 0
    HDMI Audio Output
    dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] DMI present.
    [ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
    [ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-D3FFF write-protect
    [ 0.000000] D4000-DBFFF uncachable
    [ 0.000000] DC000-EFFFF write-back
    [ 0.000000] F0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 080000000 mask FC0000000 write-back
    [ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
    [ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
    [ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
    [ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
    [ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
    [ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
    [ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
    [ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
    [ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
    [ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
    [ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
    [ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
    [ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
    [ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
    [ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
    [ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
    [ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
    [ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00010000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00010000-0x0009efff]
    [ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
    [ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
    [ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
    [ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
    [ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
    [ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
    [ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
    [ 0.000000] On node 0 totalpages: 751850
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 6 pages reserved
    [ 0.000000] DMA zone: 3913 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11696 pages used for memmap
    [ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
    [ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
    [ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
    [ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
    [ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
    [ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
    [ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
    [ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] __ex_table already sorted, skipping sort
    [ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
    [ 0.000000] NR_IRQS:4352 nr_irqs:512 16
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour VGA+ 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 12058624 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 1296.696 MHz processor
    [ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
    [ 0.003343] pid_max: default: 32768 minimum: 301
    [ 0.003400] Security Framework initialized
    [ 0.003407] AppArmor: AppArmor disabled by boot time parameter
    [ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.008132] Mount-cache hash table entries: 256
    [ 0.008498] Initializing cgroup subsys cpuacct
    [ 0.008503] Initializing cgroup subsys memory
    [ 0.008517] Initializing cgroup subsys devices
    [ 0.008520] Initializing cgroup subsys freezer
    [ 0.008522] Initializing cgroup subsys net_cls
    [ 0.008525] Initializing cgroup subsys blkio
    [ 0.008570] CPU: Physical Processor ID: 0
    [ 0.008572] CPU: Processor Core ID: 0
    [ 0.008575] mce: CPU supports 6 MCE banks
    [ 0.008587] CPU0: Thermal monitoring enabled (TM2)
    [ 0.008592] process: using mwait in idle threads
    [ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
    Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
    tlb_flushall_shift is 0xffffffff
    [ 0.010851] ACPI: Core revision 20120711
    [ 0.016699] ftrace: allocating 18348 entries in 72 pages
    [ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
    [ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
    [ 0.063329] ... version: 2
    [ 0.063329] ... bit width: 40
    [ 0.063329] ... generic registers: 2
    [ 0.063329] ... value mask: 000000ffffffffff
    [ 0.063329] ... max period: 000000007fffffff
    [ 0.063329] ... fixed-purpose events: 3
    [ 0.063329] ... event mask: 0000000700000003
    [ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.100007] smpboot: Booting Node 0, Processors #1 OK
    [ 0.113162] Brought up 2 CPUs
    [ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
    [ 0.113436] devtmpfs: initialized
    [ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
    [ 0.121465] NET: Registered protocol family 16
    [ 0.121699] ACPI: bus type pci registered
    [ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.174683] PCI: Using configuration type 1 for base access
    [ 0.175619] bio: create slab <bio-0> at 0
    [ 0.175619] ACPI: Added _OSI(Module Device)
    [ 0.175619] ACPI: Added _OSI(Processor Device)
    [ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.178073] ACPI: EC: Look up EC in DSDT
    [ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.188671] ACPI: Dynamic OEM Table Load:
    [ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
    [ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.189399] ACPI: Dynamic OEM Table Load:
    [ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
    [ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.190407] ACPI: Dynamic OEM Table Load:
    [ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
    [ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.190693] ACPI: Dynamic OEM Table Load:
    [ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
    [ 0.190715] ACPI: Interpreter enabled
    [ 0.190715] ACPI: (supports S0 S3 S4 S5)
    [ 0.190715] ACPI: Using IOAPIC for interrupt routing
    [ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
    [ 0.323314] ACPI: No dock devices found.
    [ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.323314] PCI host bridge to bus 0000:00
    [ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
    [ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
    [ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
    [ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
    [ 0.323314] DMAR: Forcing write-buffer flush capability
    [ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
    [ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
    [ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
    [ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
    [ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
    [ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
    [ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
    [ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
    [ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
    [ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
    [ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
    [ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
    [ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
    [ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
    [ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
    [ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
    [ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
    [ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
    [ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
    [ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
    [ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
    [ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
    [ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
    [ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
    [ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
    [ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
    [ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
    [ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
    [ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
    [ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
    [ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
    [ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
    [ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
    [ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
    [ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
    [ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
    [ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
    [ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
    [ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
    [ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
    [ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
    [ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
    [ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
    [ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
    [ 0.326109] pci 0000:08:00.0: supports D1 D2
    [ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
    [ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
    [ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
    [ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
    [ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
    [ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
    [ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
    [ 0.327093] pci 0000:20:00.0: supports D1 D2
    [ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
    [ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
    [ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
    [ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
    [ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
    [ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
    [ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
    [ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
    [ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
    [ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
    [ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
    [ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
    [ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
    [ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
    [ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
    [ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
    [ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
    [ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.336689] vgaarb: loaded
    [ 0.336691] vgaarb: bridge control possible 0000:00:02.0
    [ 0.336769] PCI: Using ACPI for IRQ routing
    [ 0.348092] PCI: pci_cache_line_size set to 64 bytes
    [ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
    [ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
    [ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
    [ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
    [ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
    [ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
    [ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
    [ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
    [ 0.348791] NetLabel: Initializing
    [ 0.348794] NetLabel: domain hash size = 128
    [ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.348816] NetLabel: unlabeled traffic allowed by default
    [ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
    [ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
    [ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
    [ 0.370000] Switching to clocksource hpet
    [ 0.381464] pnp: PnP ACPI init
    [ 0.381496] ACPI: bus type pnp registered
    [ 0.382022] pnp 00:00: [bus 00-ff]
    [ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
    [ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
    [ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
    [ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
    [ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
    [ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
    [ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
    [ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
    [ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
    [ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
    [ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
    [ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
    [ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
    [ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
    [ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
    [ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
    [ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.440057] pnp 00:01: [io 0x0000-0x001f]
    [ 0.440061] pnp 00:01: [io 0x0081-0x0091]
    [ 0.440065] pnp 00:01: [io 0x0093-0x009f]
    [ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
    [ 0.440072] pnp 00:01: [dma 4]
    [ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
    [ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
    [ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
    [ 0.440353] pnp 00:03: [io 0x00f0]
    [ 0.440369] pnp 00:03: [irq 13]
    [ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.440433] pnp 00:04: [io 0x002e-0x002f]
    [ 0.440436] pnp 00:04: [io 0x0061]
    [ 0.440439] pnp 00:04: [io 0x0063]
    [ 0.440443] pnp 00:04: [io 0x0065]
    [ 0.440446] pnp 00:04: [io 0x0067]
    [ 0.440449] pnp 00:04: [io 0x0070]
    [ 0.440452] pnp 00:04: [io 0x0080]
    [ 0.440456] pnp 00:04: [io 0x0092]
    [ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
    [ 0.440462] pnp 00:04: [io 0x0480-0x048f]
    [ 0.440466] pnp 00:04: [io 0xffff]
    [ 0.440469] pnp 00:04: [io 0xffff]
    [ 0.440472] pnp 00:04: [io 0x0400-0x047f]
    [ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
    [ 0.440479] pnp 00:04: [io 0xfe00]
    [ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
    [ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
    [ 0.440578] system 00:04: [io 0xffff] has been reserved
    [ 0.440583] system 00:04: [io 0xffff] has been reserved
    [ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
    [ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
    [ 0.440596] system 00:04: [io 0xfe00] has been reserved
    [ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
    [ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.440620] pnp 00:05: [io 0x0070-0x0077]
    [ 0.440629] pnp 00:05: [irq 8]
    [ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.440691] pnp 00:06: [io 0x0060]
    [ 0.440694] pnp 00:06: [io 0x0064]
    [ 0.440703] pnp 00:06: [irq 1]
    [ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.440772] pnp 00:07: [irq 12]
    [ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
    [ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
    [ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
    [ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
    [ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
    [ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
    [ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
    [ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
    [ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
    [ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.441356] pnp: PnP ACPI: found 9 devices
    [ 0.441359] ACPI: ACPI bus type pnp unregistered
    [ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
    [ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
    [ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
    [ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
    [ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
    [ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
    [ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
    [ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
    [ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
    [ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
    [ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
    [ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
    [ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
    [ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
    [ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
    [ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
    [ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
    [ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
    [ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
    [ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
    [ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
    [ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
    [ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
    [ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
    [ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
    [ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
    [ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
    [ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
    [ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
    [ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
    [ 0.450219] NET: Registered protocol family 2
    [ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.456888] TCP: reno registered
    [ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.457123] NET: Registered protocol family 1
    [ 0.457150] pci 0000:00:02.0: Boot video device
    [ 0.457669] PCI: CLS 64 bytes, default 64
    [ 0.457746] Unpacking initramfs...
    [ 0.626300] Freeing initrd memory: 4636k freed
    [ 0.628543] Simple Boot Flag at 0x3e set to 0x1
    [ 0.629045] audit: initializing netlink socket (disabled)
    [ 0.629069] type=2000 audit(1354288244.626:1): initialized
    [ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.651510] VFS: Disk quotas dquot_6.5.2
    [ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.651831] msgmni has been set to 5759
    [ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.652204] io scheduler noop registered
    [ 0.652208] io scheduler deadline registered
    [ 0.652301] io scheduler cfq registered (default)
    [ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
    [ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
    [ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
    [ 0.653107] intel_idle: does not run on family 6 model 23
    [ 0.653156] GHES: HEST is not enabled!
    [ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.653953] Linux agpgart interface v0.103
    [ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.669294] mousedev: PS/2 mouse device common for all mice
    [ 0.670409] rtc_cmos 00:05: RTC can wake from S4
    [ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.670648] cpuidle: using governor ladder
    [ 0.670651] cpuidle: using governor menu
    [ 0.670829] drop_monitor: Initializing network drop monitor service
    [ 0.670946] TCP: cubic registered
    [ 0.671122] NET: Registered protocol family 10
    [ 0.671359] NET: Registered protocol family 17
    [ 0.671373] Key type dns_resolver registered
    [ 0.671720] PM: Hibernation image not present or could not be loaded.
    [ 0.671743] registered taskstats version 1
    [ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
    [ 0.674872] Freeing unused kernel memory: 772k freed
    [ 0.675168] Write protecting the kernel read-only data: 8192k
    [ 0.682434] Freeing unused kernel memory: 1408k freed
    [ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.685881] Freeing unused kernel memory: 568k freed
    [ 0.698116] systemd-udevd[43]: starting version 195
    [ 0.701918] SCSI subsystem initialized
    [ 0.703991] ACPI: bus type scsi registered
    [ 0.704082] libata version 3.00 loaded.
    [ 0.705773] ahci 0000:00:1f.2: version 3.0
    [ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
    [ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
    [ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
    [ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
    [ 0.708617] scsi0 : ahci
    [ 0.709413] scsi1 : ahci
    [ 0.709823] scsi2 : ahci
    [ 0.710229] scsi3 : ahci
    [ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
    [ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
    [ 0.710367] ata3: DUMMY
    [ 0.710370] ata4: DUMMY
    [ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
    [ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
    [ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
    [ 1.200123] ata1.00: configured for UDMA/133
    [ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
    [ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
    [ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
    [ 1.213590] ata2.00: applying bridge limits
    [ 1.229911] ata2.00: configured for UDMA/100
    [ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
    [ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
    [ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.273864] ACPI: bus type usb registered
    [ 1.273912] usbcore: registered new interface driver usbfs
    [ 1.273946] usbcore: registered new interface driver hub
    [ 1.273996] usbcore: registered new device driver usb
    [ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
    [ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
    [ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
    [ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
    [ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
    [ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
    [ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
    [ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
    [ 1.286950] hub 1-0:1.0: USB hub found
    [ 1.286958] hub 1-0:1.0: 6 ports detected
    [ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
    [ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
    [ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
    [ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
    [ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
    [ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
    [ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
    [ 1.300266] hub 2-0:1.0: USB hub found
    [ 1.300273] hub 2-0:1.0: 6 ports detected
    [ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
    [ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
    [ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
    [ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
    [ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
    [ 1.301506] hub 3-0:1.0: USB hub found
    [ 1.301513] hub 3-0:1.0: 2 ports detected
    [ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
    [ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
    [ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
    [ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
    [ 1.301997] hub 4-0:1.0: USB hub found
    [ 1.302004] hub 4-0:1.0: 2 ports detected
    [ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
    [ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
    [ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
    [ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
    [ 1.302434] hub 5-0:1.0: USB hub found
    [ 1.302441] hub 5-0:1.0: 2 ports detected
    [ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
    [ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
    [ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
    [ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
    [ 1.302824] hub 6-0:1.0: USB hub found
    [ 1.302833] hub 6-0:1.0: 2 ports detected
    [ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
    [ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
    [ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
    [ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
    [ 1.303759] hub 7-0:1.0: USB hub found
    [ 1.303766] hub 7-0:1.0: 2 ports detected
    [ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
    [ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
    [ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
    [ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
    [ 1.304881] hub 8-0:1.0: USB hub found
    [ 1.304888] hub 8-0:1.0: 2 ports detected
    [ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
    [ 1.330105] [drm] Initialized drm 1.1.0 20060810
    [ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
    [ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
    [ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
    [ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
    [ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
    [ 1.334889] ACPI: Lid Switch [LID0]
    [ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
    [ 1.335086] ACPI: Power Button [PWRB]
    [ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
    [ 1.335196] ACPI: Power Button [PWRF]
    [ 1.341526] i915 0000:00:02.0: setting latency timer to 64
    [ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
    [ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.415008] [drm] Driver supports precise vblank timestamp query.
    [ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
    [ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
    [ 1.630036] Switching to clocksource tsc
    [ 2.030864] fbcon: inteldrmfb (fb0) is primary device
    [ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
    [ 2.574662] Console: switching to colour frame buffer device 170x48
    [ 2.579271] fb0: inteldrmfb frame buffer device
    [ 2.579273] drm: registered panic notifier
    [ 2.680113] acpi device:07: registered as cooling_device0
    [ 2.780104] acpi device:08: registered as cooling_device1
    [ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
    [ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 2.963907] device-mapper: uevent: version 1.0.3
    [ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
    [ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
    [ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
    [ 9.679599] XFS (dm-0): Mounting Filesystem
    [ 9.807350] XFS (dm-0): Ending clean mount
    [ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
    [ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
    [ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
    [ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
    [ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 11.845393] systemd[1]: Starting Login Prompts.
    [ 11.845414] systemd[1]: Reached target Login Prompts.
    [ 11.845429] systemd[1]: Starting Arch Daemons.
    [ 11.845447] systemd[1]: Reached target Arch Daemons.
    [ 11.845462] systemd[1]: Starting Remote File Systems.
    [ 11.845481] systemd[1]: Reached target Remote File Systems.
    [ 11.845496] systemd[1]: Starting Syslog Socket.
    [ 11.845558] systemd[1]: Listening on Syslog Socket.
    [ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
    [ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 11.845766] systemd[1]: Starting udev Kernel Socket.
    [ 11.845804] systemd[1]: Listening on udev Kernel Socket.
    [ 11.845885] systemd[1]: Starting udev Control Socket.
    [ 11.845927] systemd[1]: Listening on udev Control Socket.
    [ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
    [ 11.846175] systemd[1]: Expecting device dev-sda8.device...
    [ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
    [ 11.846210] systemd[1]: Expecting device dev-sda6.device...
    [ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
    [ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
    [ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
    [ 11.846368] systemd[1]: Starting Journal Socket.
    [ 11.846439] systemd[1]: Listening on Journal Socket.
    [ 11.846467] systemd[1]: Started File System Check on Root Device.
    [ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
    [ 11.850382] systemd[1]: Mounting Temporary Directory...
    [ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
    [ 12.026864] systemd[1]: Mounting Huge Pages File System...
    [ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
    [ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
    [ 12.156149] systemd[1]: Starting Load Kernel Modules...
    [ 12.173525] systemd[1]: Mounting Debug File System...
    [ 12.186770] systemd[1]: Starting Setup Virtual Console...
    [ 12.484840] systemd[1]: Starting Apply Kernel Variables...
    [ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
    [ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
    [ 12.636850] systemd[1]: Starting Journal Service...
    [ 12.646587] systemd[1]: Started Journal Service.
    [ 12.646650] systemd[1]: Starting Syslog.
    [ 12.646684] systemd[1]: Reached target Syslog.
    [ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
    [ 12.647816] systemd[1]: Mounted Temporary Directory.
    [ 12.647972] systemd[1]: Mounted Huge Pages File System.
    [ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
    [ 12.653654] systemd[1]: Mounted Debug File System.
    [ 12.653705] systemd[1]: Starting Local File Systems (Pre).
    [ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
    [ 12.653749] systemd[1]: Starting Load Random Seed...
    [ 12.705203] FS-Cache: Loaded
    [ 12.740616] RPC: Registered named UNIX socket transport module.
    [ 12.740621] RPC: Registered udp transport module.
    [ 12.740624] RPC: Registered tcp transport module.
    [ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
    [ 12.881473] systemd-udevd[162]: starting version 196
    [ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
    [ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
    [ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
    [ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
    [ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
    [ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
    [ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
    [ 14.330974] lib80211: common routines for IEEE802.11 drivers
    [ 14.330979] lib80211_crypt: registered algorithm 'NULL'
    [ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
    [ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
    [ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
    [ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 14.709327] ACPI: Requesting acpi_cpufreq
    [ 14.714946] Monitor-Mwait will be used to enter C-1 state
    [ 14.714973] Monitor-Mwait will be used to enter C-2 state
    [ 14.714989] Monitor-Mwait will be used to enter C-3 state
    [ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
    [ 14.715031] ACPI: acpi_idle registered with cpuidle
    [ 14.720557] Switching to clocksource hpet
    [ 14.757813] wmi: Mapper loaded
    [ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
    [ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
    [ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
    [ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
    [ 15.417769] iTCO_vendor_support: vendor-support=0
    [ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
    [ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
    [ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
    [ 15.585549] Disabling lock debugging due to kernel taint
    [ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
    [ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
    [ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
    [ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
    [ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
    [ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
    [ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 16.108446] Linux media interface: v0.10
    [ 16.120558] Linux video capture interface: v2.00
    [ 16.169228] usbcore: registered new interface driver uas
    [ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
    [ 16.316308] Initializing USB Mass Storage driver...
    [ 16.316609] usbcore: registered new interface driver usb-storage
    [ 16.316613] USB Mass Storage support registered.
    [ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
    [ 16.328873] usbcore: registered new interface driver uvcvideo
    [ 16.328876] USB Video Class driver (1.1.1)
    [ 16.779720] usb 2-4: USB disconnect, device number 2
    [ 16.783629] scsi4 : usb-storage 2-4:1.0
    [ 16.783773] usbcore: registered new interface driver ums-realtek
    [ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
    [ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
    [ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
    [ 21.656824] XFS (dm-1): Mounting Filesystem
    [ 21.839619] XFS (dm-1): Ending clean mount
    [ 21.940898] systemd-journald[163]: Received SIGUSR1
    [ 28.055735] r8169 0000:20:00.0: eth0: link down
    [ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 28.875645] Bluetooth: Core ver 2.16
    [ 28.875677] NET: Registered protocol family 31
    [ 28.875680] Bluetooth: HCI device and connection manager initialized
    [ 28.875684] Bluetooth: HCI socket layer initialized
    [ 28.875687] Bluetooth: L2CAP socket layer initialized
    [ 28.875695] Bluetooth: SCO socket layer initialized
    [ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 37.807702] fuse init (API version 7.20)
    [ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
    lsmod
    Module Size Used by
    fuse 69173 2
    michael_mic 2074 8
    arc4 2039 4
    ecb 2105 0
    bnep 8857 2
    bluetooth 192120 7 bnep
    snd_seq 50881 1
    snd_seq_device 5268 1 snd_seq
    ums_realtek 7391 0
    usb_storage 47384 1 ums_realtek
    uvcvideo 72787 0
    videobuf2_vmalloc 2468 1 uvcvideo
    uas 11119 0
    videobuf2_memops 2246 1 videobuf2_vmalloc
    videobuf2_core 24030 1 uvcvideo
    videodev 100859 2 uvcvideo,videobuf2_core
    media 10405 2 uvcvideo,videodev
    i2c_i801 9571 0
    joydev 9991 0
    coretemp 6070 0
    kvm_intel 124749 0
    lib80211_crypt_tkip 7738 0
    wl 2558087 0
    kvm 373917 1 kvm_intel
    iTCO_wdt 5255 0
    iTCO_vendor_support 1929 1 iTCO_wdt
    dell_wmi 1485 0
    acpi_cpufreq 5933 1
    lpc_ich 10609 0
    ac 2536 0
    mperf 1267 1 acpi_cpufreq
    sparse_keymap 3056 1 dell_wmi
    battery 6773 0
    wmi 8379 1 dell_wmi
    dell_laptop 8787 0
    processor 26855 3 acpi_cpufreq
    evdev 10266 12
    psmouse 71909 0
    serio_raw 4689 0
    dcdbas 5520 1 dell_laptop
    lib80211 3949 2 wl,lib80211_crypt_tkip
    microcode 12377 0
    cfg80211 177108 1 wl
    rfkill 15604 5 cfg80211,bluetooth
    snd_hda_codec_hdmi 24487 1
    snd_hda_codec_realtek 61193 1
    snd_hda_intel 26180 3
    snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6428 1 snd_hda_codec
    snd_pcm_oss 38992 0
    snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    snd_timer 18934 3 snd_pcm,snd_seq
    snd_mixer_oss 15347 1 snd_pcm_oss
    snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
    soundcore 5442 1 snd
    pcspkr 1899 0
    r8169 56839 0
    mii 4091 1 r8169
    nfs 127007 0
    lockd 64904 1 nfs
    sunrpc 186092 2 nfs,lockd
    fscache 40995 1 nfs
    ablk_helper 1972 0
    cryptd 8741 1 ablk_helper
    aes_x86_64 7508 6
    aes_generic 26138 1 aes_x86_64
    xts 3101 3
    gf128mul 6050 1 xts
    dm_crypt 15799 3
    dm_mod 72105 7 dm_crypt
    i915 495521 3
    video 11276 1 i915
    button 4662 1 i915
    i2c_algo_bit 5391 1 i915
    intel_agp 10744 1 i915
    intel_gtt 15659 3 i915,intel_agp
    drm_kms_helper 32877 1 i915
    drm 218852 4 i915,drm_kms_helper
    i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
    vfat 10119 0
    fat 48338 1 vfat
    xfs 748207 2
    ext4 440434 1
    crc16 1359 2 ext4,bluetooth
    jbd2 78751 1 ext4
    mbcache 5977 1 ext4
    uhci_hcd 23436 0
    ehci_hcd 41816 0
    sr_mod 14823 0
    usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
    usb_common 954 1 usbcore
    cdrom 35520 1 sr_mod
    sd_mod 29559 5
    ahci 21360 4
    libahci 20023 1 ahci
    libata 167683 2 ahci,libahci
    scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
    lspci
    00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
    00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
    00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
    00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
    00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
    00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
    00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
    00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
    00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
    00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
    00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
    00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
    00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
    00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
    00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
    00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
    00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
    08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
    20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
    pacman -Q | grep ...
    alsa-lib 1.0.26-1
    alsa-plugins 1.0.26-1
    alsa-utils 1.0.26-1
    alsaplayer 0.99.81-5
    lib32-alsa-lib 1.0.26-1
    lib32-alsa-plugins 1.0.26-1
    lib32-libpulse 2.1-1
    lib32-libsndfile 1.0.25-2
    libcanberra-pulse 0.30-2
    libcdaudio 0.99.12-6
    libpulse 2.1-1
    libsndfile 1.0.25-2
    portaudio 19_20111121-1
    pulseaudio 2.1-1
    pulseaudio-alsa 2-1
    sound-juicer 3.5.0-1
    sound-theme-freedesktop 0.8-1
    soundtouch 1.6.0-1
    teamspeak-soundpack-portal 1-4
    webrtc-audio-processing 0.1-1
    pactl list
    Module #0
    Name: module-device-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute state of devices"
    module.version = "2.1"
    Module #1
    Name: module-stream-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore the volume/mute/device state of streams"
    module.version = "2.1"
    Module #2
    Name: module-card-restore
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Automatically restore profile of cards"
    module.version = "2.1"
    Module #3
    Name: module-augment-properties
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Augment the property sets of streams with additional static information"
    module.version = "2.1"
    Module #4
    Name: module-udev-detect
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "Lennart Poettering"
    module.description = "Detect available audio hardware and load matching drivers"
    module.version = "2.1"
    Module #5
    Name: module-jackdbus-detect
    Argument:
    Usage counter: n/a
    Properties:
    module.author = "David Henningsson"
    module.descript

    I set the loglevel to debug and rebooted.
    grep -i pulse /var/log/everything.log
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
    Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
    Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
    Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
    Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
    Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
    Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
    Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
    Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
    Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
    Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
    Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
    Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
    Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
    Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
    By now I also made my system not load any moudules which have oss in their name. Didn't help either.

  • [Solved] Multiple sounds at the same time

    Hello!
    I've just received my new Creative X-Fi Titanium since I was in need of an optical in socket and have spent a while trying to get it to work to my liking.
    I read through the ALSA wiki, read countless posts on the forums such as this one http://bbs.archlinux.org/viewtopic.php?pid=702994, tried several .asoundrc files and of course read the related arch wiki pages without much success.
    Everything is upmixed properly to 5.1 output but I still can't play two sounds at once - with one odd exception:
    When I have mpd playing and start a youtube video, sound will play but it will only output through the 2 front speakers and I can pause and unpause mpd normally, sound will return.
    When I pause mpd and play a youtube video, it gets upmixed properly but mpd returns "error: problems opening sound device".
    Mplayer returns [AO_ALSA] alsa-lib: pcm_hw.c:1291:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Invalid argument and [AO_ALSA] alsa-lib: pcm_dmix.c:1060:(snd_pcm_dmix_open) unable to open slave.
    Heroes of Newerth returns the same: ALSA lib pcm_dmix.c:1060:(snd_pcm_dmix_open) unable to open slave.
    fuser -v /dev/snd/*
    /dev/snd/controlC0: eyescream 27612 F.... Steam.exe
    /dev/snd/pcmC0D0p: eyescream 27612 F...m Steam.exe
    fuser -v /dev/dsp*
    zsh: no matches found: /dev/dsp*
    cat .asoundrc
    pcm.snd_card {
    type hw
    card 0 # change to your cards number or name
    # 6 channel dmix:
    pcm.dmix6 {
    type dmix
    ipc_key 1024
    ipc_key_add_uid false
    ipc_perm 0666
    slave {
    pcm "hw:0,0"
    rate 48000
    format "S32_LE"
    channels 6
    period_time 0
    period_size 1024
    buffer_time 0
    buffer_size 8192
    # upmixing:
    pcm.ch51dup {
    type route
    slave.pcm dmix6
    slave.channels 6
    ttable.0.0 1
    ttable.1.1 1
    ttable.0.2 0.6
    ttable.1.3 0.6
    ttable.0.4 0.5
    ttable.1.4 0.5
    ttable.0.5 0.5
    ttable.1.5 0.5
    pcm.duplex {
    type asym
    playback.pcm "ch51dup" # upmix first
    capture.pcm "hw:0"
    # change default device:
    pcm.!default {
    type plug
    slave {
    pcm "duplex"
    # for aoss
    #pcm.dsp "duplex"
    #pcm.dsp1 "duplex"
    If anyone could hint me in the right direction as to how I could get it to work properly or provide me with a working .asoundrc, I'd appreciate it!
    Last edited by eyescream (2010-02-25 19:30:30)

    eyescream wrote:I can have sound in mpd and mplayer at the same time now
    Good. So file the damned bug report against mpd. Right now would be a good time.
    eyescream wrote:but flash completely blocks sound off for other things.
    See thread. Prove to me that flash/firefox is blocking:
    fuser -v /dev/snd/* /dev/dsp*
    eyescream wrote:The problem now is that mpd only outputs through my front speakers, so it isn't being upmixed anymore.
    Forget about upmixing for the moment, until you've got the ALSA/OSS conflict solved.
    Edit: Use e.g.:
    audio_output {
    type "alsa"
    name "Sound Card"
    options "dev=dmixer"
    device "headphones"
    In /etc/mpd.conf or ~/.mpdconf, where the device string matches an ALSA pcm entry.
    eyescream wrote:What do you mean by not renaming "default" exactly?
    This, of course, from your own ~/.asoundrc
    # change default device:
    pcm.!default {
         type plug
         slave {
        pcm "duplex"
    Comment that section out, for the time being.
    Last edited by brebs (2010-02-25 02:43:54)

  • [solved] No sound cards found

    Hi, I no longer have any sound, not sure when this started
    This is what I have:
    jason-laptop% aplay -l
    aplay: device_list:268: no soundcards found...
    jason-laptop% lspci
    00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
    00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
    00:1a.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 02)
    00:1a.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 02)
    00:1a.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #2 (rev 02)
    00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 02)
    00:1c.0 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 1 (rev 02)
    00:1c.1 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 2 (rev 02)
    00:1c.3 PCI bridge: Intel Corporation 82801H (ICH8 Family) PCI Express Port 4 (rev 02)
    00:1d.0 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #1 (rev 02)
    00:1d.1 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #2 (rev 02)
    00:1d.2 USB controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #3 (rev 02)
    00:1d.7 USB controller: Intel Corporation 82801H (ICH8 Family) USB2 EHCI Controller #1 (rev 02)
    00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev f2)
    00:1f.0 ISA bridge: Intel Corporation 82801HM (ICH8M) LPC Interface Controller (rev 02)
    00:1f.1 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) IDE Controller (rev 02)
    00:1f.2 IDE interface: Intel Corporation 82801HM/HEM (ICH8M/ICH8M-E) SATA Controller [IDE mode] (rev 02)
    00:1f.3 SMBus: Intel Corporation 82801H (ICH8 Family) SMBus Controller (rev 02)
    01:00.0 VGA compatible controller: NVIDIA Corporation G84M [GeForce 8600M GT] (rev a1)
    03:00.0 Ethernet controller: Broadcom Corporation BCM4401-B0 100Base-TX (rev 02)
    03:01.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller (rev 05)
    03:01.1 SD Host controller: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 22)
    03:01.2 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 12)
    03:01.3 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 12)
    0c:00.0 Network controller: Broadcom Corporation BCM4311 802.11b/g WLAN (rev 01)
    May have lost sound after an upgrade.
    I dont see anything related in journalctl
    Edit:
    Im using alsa and pulse, I see 'dummy output' in pavucontrol
    pacman log:
    [2013-09-07 22:08] [PACMAN] Running 'pacman -Syu'
    [2013-09-07 22:08] [PACMAN] synchronizing package lists
    [2013-09-07 22:08] [PACMAN] starting full system upgrade
    [2013-09-07 22:08] [PACMAN] upgraded chromium (29.0.1547.62-1 -> 29.0.1547.65-1)
    [2013-09-07 22:08] [PACMAN] upgraded curl (7.32.0-1 -> 7.32.0-2)
    [2013-09-07 22:09] [ALPM-SCRIPTLET] updating font cache... done.
    [2013-09-07 22:09] [PACMAN] upgraded fontconfig (2.10.93-1 -> 2.10.95-1)
    [2013-09-07 22:09] [PACMAN] upgraded ghostscript (9.09-1 -> 9.10-1)
    [2013-09-07 22:09] [ALPM-SCRIPTLET] Generating locales...
    [2013-09-07 22:09] [ALPM-SCRIPTLET] en_ZA.UTF-8... done
    [2013-09-07 22:09] [ALPM-SCRIPTLET] Generation complete.
    [2013-09-07 22:09] [PACMAN] upgraded glibc (2.18-2 -> 2.18-3)
    [2013-09-07 22:09] [PACMAN] upgraded gnutls (3.2.3-1 -> 3.2.4-1)
    [2013-09-07 22:09] [PACMAN] upgraded gpicview (0.2.3-1 -> 0.2.3-2)
    [2013-09-07 22:09] [PACMAN] upgraded gtk3 (3.8.2-1 -> 3.8.4-1)
    [2013-09-07 22:09] [PACMAN] upgraded lcms (1.19-2 -> 1.19-4)
    [2013-09-07 22:09] [PACMAN] upgraded libldap (2.4.35-4 -> 2.4.36-1)
    [2013-09-07 22:09] [PACMAN] upgraded libmodplug (0.8.8.4-1 -> 0.8.8.4-2)
    [2013-09-07 22:09] [PACMAN] upgraded lightdm (1:1.6.0-7 -> 1:1.6.1-1)
    [2013-09-07 22:09] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-09-07 22:09] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-09-07 22:09] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-07 22:09] [PACMAN] upgraded linux (3.10.9-1 -> 3.10.10-1)
    [2013-09-07 22:09] [PACMAN] upgraded lxappearance (0.5.2-1 -> 0.5.2-2)
    [2013-09-07 22:09] [PACMAN] upgraded openbox (3.5.2-1 -> 3.5.2-4)
    [2013-09-07 22:09] [PACMAN] upgraded lxappearance-obconf (0.2.0-1 -> 0.2.0-2)
    [2013-09-07 22:09] [PACMAN] upgraded lxde-common (0.5.5-2 -> 0.5.5-3)
    [2013-09-07 22:09] [PACMAN] upgraded menu-cache (0.5.0-1 -> 0.5.0-2)
    [2013-09-07 22:09] [PACMAN] upgraded lxlauncher (0.2.2-3 -> 0.2.2-4)
    [2013-09-07 22:09] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2013-09-07 22:09] [PACMAN] upgraded pacman-mirrorlist (20130626-1 -> 20130830-1)
    [2013-09-07 22:10] [PACMAN] upgraded python (3.3.2-1 -> 3.3.2-2)
    [2013-09-07 22:10] [PACMAN] upgraded sqlite (3.8.0-2 -> 3.8.0.1-1)
    [2013-09-07 22:10] [PACMAN] upgraded python2 (2.7.5-1 -> 2.7.5-2)
    [2013-09-07 22:10] [PACMAN] upgraded reiserfsprogs (3.6.23-1 -> 3.6.24-1)
    [2013-09-07 22:10] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
    [2013-09-07 22:10] [PACMAN] upgraded virtualbox-host-modules (4.2.16-8 -> 4.2.18-1)
    [2013-09-07 22:10] [PACMAN] upgraded virtualbox (4.2.16-1 -> 4.2.18-1)
    [2013-09-07 22:10] [PACMAN] upgraded weston (1.2.1-1 -> 1.2.2-1)
    [2013-09-07 22:10] Exited with code 0
    [2013-09-07 22:11] [PACMAN] Running 'pacman -S kdebase'
    [2013-09-07 22:23] [PACMAN] installed kde-wallpapers (4.11.0-1)
    [2013-09-07 22:23] [PACMAN] installed exiv2 (0.23-1)
    [2013-09-07 22:23] [PACMAN] installed strigi (0.7.8-4)
    [2013-09-07 22:23] [PACMAN] installed attica (0.4.2-1)
    [2013-09-07 22:23] [PACMAN] installed libiodbc (3.52.8-2)
    [2013-09-07 22:23] [PACMAN] installed virtuoso-base (1:6.1.6-1)
    [2013-09-07 22:23] [PACMAN] installed rasqal (1:0.9.30-1)
    [2013-09-07 22:23] [PACMAN] installed redland (1:1.0.16-2)
    [2013-09-07 22:23] [PACMAN] installed soprano (2.9.3-1)
    [2013-09-07 22:23] [PACMAN] installed grantlee (0.3.0-2)
    [2013-09-07 22:23] [PACMAN] installed shared-desktop-ontologies (0.11.0-1)
    [2013-09-07 22:23] [PACMAN] installed qca (2.0.3-4)
    [2013-09-07 22:23] [PACMAN] installed libdbusmenu-qt (0.9.2-2)
    [2013-09-07 22:23] [PACMAN] installed polkit-qt (0.103.0-2)
    [2013-09-07 22:23] [ALPM-SCRIPTLET] ==> aspell comes with no default dictionary
    [2013-09-07 22:23] [PACMAN] installed aspell (0.60.6.1-1)
    [2013-09-07 22:23] [PACMAN] installed hunspell (1.3.2-2)
    [2013-09-07 22:23] [PACMAN] installed hspell (1.2-1)
    [2013-09-07 22:23] [PACMAN] installed enchant (1.6.0-4)
    [2013-09-07 22:23] [PACMAN] installed ilmbase (2.0.1-1)
    [2013-09-07 22:23] [PACMAN] installed openexr (2.0.1-1)
    [2013-09-07 22:23] [PACMAN] installed docbook-xml (4.5-5)
    [2013-09-07 22:23] [PACMAN] installed docbook-xsl (1.78.1-1)
    [2013-09-07 22:23] [PACMAN] installed media-player-info (19-1)
    [2013-09-07 22:24] [PACMAN] installed qtwebkit (2.3.2-1)
    [2013-09-07 22:24] [PACMAN] installed kdelibs (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed poppler-qt4 (0.24.1-1)
    [2013-09-07 22:24] [PACMAN] installed libzip (0.11.1-1)
    [2013-09-07 22:24] [PACMAN] installed convertlit (1.8-6)
    [2013-09-07 22:24] [PACMAN] installed ebook-tools (0.2.2-1)
    [2013-09-07 22:24] [PACMAN] installed nepomuk-core (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kactivities (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed libssh (0.5.4-1)
    [2013-09-07 22:24] [PACMAN] installed oxygen-icons (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-runtime (4.11.0-2)
    [2013-09-07 22:24] [PACMAN] installed kdebase-lib (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed nepomuk-widgets (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-dolphin (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-kdepasswd (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-kdialog (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-keditbookmarks (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-kfind (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-konqueror (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed tidyhtml (1.46-2)
    [2013-09-07 22:24] [PACMAN] installed kdebase-konq-plugins (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-konsole (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-katepart (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-kwrite (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed libmariadbclient (5.5.32-2)
    [2013-09-07 22:24] [PACMAN] installed mariadb-clients (5.5.32-2)
    [2013-09-07 22:24] [ALPM-SCRIPTLET] >> If you are migrating from MySQL, don't forget to run 'mysql_upgrade'
    [2013-09-07 22:24] [ALPM-SCRIPTLET] after mysqld.service restart.
    [2013-09-07 22:24] [PACMAN] installed mariadb (5.5.32-2)
    [2013-09-07 22:24] [PACMAN] installed akonadi (1.10.2-1)
    [2013-09-07 22:24] [PACMAN] installed libical (1.0-2)
    [2013-09-07 22:24] [PACMAN] installed libdmtx (0.7.4-4)
    [2013-09-07 22:24] [PACMAN] installed qrencode (3.4.3-1)
    [2013-09-07 22:24] [PACMAN] installed prison (1.0-2)
    [2013-09-07 22:24] [PACMAN] installed qjson (0.8.1-2)
    [2013-09-07 22:24] [PACMAN] installed kdepimlibs (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed libkgapi (2.0.1-1)
    [2013-09-07 22:24] [PACMAN] installed xerces-c (3.1.1-4)
    [2013-09-07 22:24] [PACMAN] installed libkolabxml (0.8.4-2)
    [2013-09-07 22:24] [PACMAN] installed libkolab (0.4.2-1)
    [2013-09-07 22:24] [PACMAN] installed libkfbapi (1.0-1)
    [2013-09-07 22:24] [PACMAN] installed kdepim-runtime (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed lm_sensors (3.3.4-1)
    [2013-09-07 22:24] [PACMAN] installed qimageblitz (0.0.6-3)
    [2013-09-07 22:24] [PACMAN] installed polkit-kde (0.99.0-2)
    [2013-09-07 22:24] [PACMAN] installed xorg-xprop (1.2.2-1)
    [2013-09-07 22:24] [PACMAN] installed cln (1.3.3-1)
    [2013-09-07 22:24] [PACMAN] installed libqalculate (0.9.7-3)
    [2013-09-07 22:24] [PACMAN] installed xorg-xmessage (1.0.4-1)
    [2013-09-07 22:24] [PACMAN] installed libusb-compat (0.1.5-1)
    [2013-09-07 22:24] [PACMAN] installed kde-base-artwork (4.11.0-1)
    [2013-09-07 22:24] [PACMAN] installed xcb-util-renderutil (0.3.8-1)
    [2013-09-07 22:24] [PACMAN] installed kdebase-workspace (4.11.0-3)
    [2013-09-07 22:24] [PACMAN] installed kdebase-plasma (4.11.0-1)
    [2013-09-07 22:58] [PACMAN] Running 'pacman -S phonon-gstreamer'
    [2013-09-07 22:58] [PACMAN] Running 'pacman -S phonon-vlc'
    [2013-09-07 22:58] [PACMAN] installed phonon-vlc (0.6.2-1)
    [2013-09-07 22:59] [PACMAN] Running 'pacman -S alsa-utils alsa-lib'
    [2013-09-07 22:59] [PACMAN] reinstalled alsa-lib (1.0.27.2-1)
    [2013-09-07 22:59] [PACMAN] reinstalled alsa-utils (1.0.27.2-1)
    [2013-09-07 23:00] [PACMAN] Running 'pacman -S gstreamer0.10-plugin'
    [2013-09-07 23:00] [PACMAN] Running 'pacman -S gstreamer0.10-plugins'
    [2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-bad-plugins (0.10.23-4)
    [2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-base-plugins (0.10.36-1)
    [2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-ffmpeg (0.10.13-1)
    [2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-good-plugins (0.10.31-3)
    [2013-09-07 23:00] [PACMAN] reinstalled gstreamer0.10-ugly-plugins (0.10.19-6)
    [2013-09-07 23:03] [PACMAN] Running 'pacman -S pkgfile'
    [2013-09-07 23:04] [ALPM-SCRIPTLET] ==> Run 'pkgfile --update' to initialize the database
    [2013-09-07 23:04] [PACMAN] installed pkgfile (9-1)
    [2013-09-07 23:15] [PACMAN] Running 'pacman -U /var/cache/pacman/pkg/linux-3.10.9-1-x86_64.pkg.tar.xz'
    [2013-09-07 23:15] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-09-07 23:15] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Starting build: 3.10.9-1-ARCH
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Starting build: 3.10.9-1-ARCH
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-09-07 23:15] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-07 23:15] [PACMAN] downgraded linux (3.10.10-1 -> 3.10.9-1)
    [2013-09-07 23:17] [PACMAN] Running 'pacman -Suu'
    [2013-09-07 23:17] [PACMAN] starting full system upgrade
    [2013-09-07 23:17] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-09-07 23:17] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-07 23:17] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-09-07 23:18] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-07 23:18] [PACMAN] upgraded linux (3.10.9-1 -> 3.10.10-1)
    [2013-09-08 13:08] [PACMAN] Running 'pacman -S alsa-lib alsa-utils pulseaudio-alsa pulseaudio'
    [2013-09-08 13:08] [PACMAN] reinstalled alsa-lib (1.0.27.2-1)
    [2013-09-08 13:08] [PACMAN] reinstalled alsa-utils (1.0.27.2-1)
    [2013-09-08 13:08] [ALPM-SCRIPTLET] >>> If you have per-user copies of configuration files (such as client.conf,
    [2013-09-08 13:08] [ALPM-SCRIPTLET] daemon.conf or default.pa) in ~/.pulse/, make sure you keep them in sync
    [2013-09-08 13:08] [ALPM-SCRIPTLET] with changes to the packaged files in /etc/pulse/. Otherwise, PulseAudio
    [2013-09-08 13:08] [ALPM-SCRIPTLET] may refuse to start due to configuration errors.
    [2013-09-08 13:08] [PACMAN] reinstalled pulseaudio (4.0-2)
    [2013-09-08 13:08] [PACMAN] reinstalled pulseaudio-alsa (2-2)
    [2013-09-08 13:09] [PACMAN] Running 'pacman -S linux'
    [2013-09-08 13:09] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-09-08 13:09] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-09-08 13:09] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-09-08 13:09] [PACMAN] reinstalled linux (3.10.10-1)
    [2013-09-08 13:17] [PACMAN] Running 'pacman -Syu'
    [2013-09-08 13:17] [PACMAN] synchronizing package lists
    Last edited by jrussell (2013-09-08 12:02:10)

    Ok it seems that I would have no sound cards listed by aplay -l if I logged in from lightdm, If I logged in from a tty I would get sound cards listed from aplay -l.
    I think lightdm 1:1.6.1-2 fixed my problem, everything works now, Id like to know why/how this happened if anyone knows? Thanks.

  • [Solved]No sound anymore (ALSA/PulseAudio)

    Ok so I have no idea why I have no sound anymore, I didn't install anything...
    Anyway, that's what I've tried:
    -Check if mixer are all up in alsamixer
    -Try to play a bit with pavucontrol
    -Reboot
    -Rerun pulseaudio with verbose
    -Mute and unmute with physical button (I don't know why but I used to get this problem and it used to be solved just doing this)
    -Googgling and searching this forum
    Here are some more info
    Pulseaudio logs:
    └┼─$─┤▶ pulseaudio -k; pulseaudio -vvvvv
    E: [pulseaudio] main.c: Failed to kill daemon: No such process
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 5.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
    D: [pulseaudio] main.c: Found 4 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is a3af3988434b49f3b8af2ab66eba685b.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1001/pulse.
    I: [pulseaudio] main.c: Using state directory /home/unkn0wn/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
    D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
    I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
    I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
    I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
    I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
    I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
    I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
    I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes.tdb'
    I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes'.
    I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes.tdb'
    I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes'.
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
    D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
    I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
    D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database.tdb'
    I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database'.
    I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
    I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
    I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
    D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
    D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
    D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
    I: [pulseaudio] module-udev-detect.c: Found 1 cards.
    I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-jackdbus-detect.so': success
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c9a6328a5bfaef44136d134253502922 as :1.32
    D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
    I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "channels=2").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-policy.so': success
    I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-discover.so': success
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez5-discover.so': success
    D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 54d6e91cb1d72b925a540cf453502907 as :1.40
    I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez4-discover.so': failure
    I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-esound-protocol-unix.so': success
    I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #10; argument: "").
    I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-gconf.so': success
    I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
    I: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
    I: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
    I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
    I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
    D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
    I: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null: front-left: 99957 / 153%, front-right: 99957 / 153%
    I: [pulseaudio] module-device-restore.c: Restoring mute state for sink auto_null.
    I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] sink.c: device.description = "Dummy Output"
    I: [pulseaudio] sink.c: device.class = "abstract"
    I: [pulseaudio] sink.c: device.icon_name = "audio-card"
    D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
    I: [pulseaudio] module-device-restore.c: Restoring mute state for source auto_null.monitor.
    I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
    I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
    I: [pulseaudio] source.c: device.class = "monitor"
    I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
    D: [null-sink] module-null-sink.c: Thread starting up
    D: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
    I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #16; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
    I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
    I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
    D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
    I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-console-kit.so': success
    I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
    D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-systemd-login.so': success
    I: [pulseaudio] client.c: Created 0 "Login Session c1"
    D: [pulseaudio] module-systemd-login.c: Added new session c1
    I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
    I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
    D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
    D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
    I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
    I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
    D: [pulseaudio] main.c: Got org.PulseAudio1!
    D: [pulseaudio] main.c: Got org.pulseaudio.Server!
    I: [pulseaudio] main.c: Daemon startup complete.
    E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
    I: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle f
    └┼─$─┤▶ loginctl session-status c1
    c1 - unkn0wn (1001)
    Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
    Leader: 1048 (slim)
    Seat: seat0; vc7
    Display: :0.0
    Remote: user root
    Service: slim; type x11; class user
    State: active
    Unit: session-c1.scope
    |-1048 /usr/bin/slim -nodaemon
    |-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
    |-2214 dbus-launch --sh-syntax --exit-with-session
    |-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    |-2227 tint2
    |-2230 xcompmgr -CfF
    |-2231 volumeicon
    |-2236 conky -q
    |-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
    |-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
    |-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
    |-2259 /usr/lib/gvfs/gvfsd
    |-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
    |-2278 /usr/lib32/skype/skype
    |-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
    |-2322 /usr/lib/xfce4/xfconf/xfconfd
    |-2376 firefox
    |-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
    -I see the mixer going up and down in pavucontrol if I play some music
    └┼─$─┤▶ loginctl session-status c1
    c1 - unkn0wn (1001)
    Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
    Leader: 1048 (slim)
    Seat: seat0; vc7
    Display: :0.0
    Remote: user root
    Service: slim; type x11; class user
    State: active
    Unit: session-c1.scope
    |-1048 /usr/bin/slim -nodaemon
    |-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
    |-2214 dbus-launch --sh-syntax --exit-with-session
    |-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
    |-2227 tint2
    |-2230 xcompmgr -CfF
    |-2231 volumeicon
    |-2236 conky -q
    |-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
    |-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
    |-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
    |-2259 /usr/lib/gvfs/gvfsd
    |-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
    |-2278 /usr/lib32/skype/skype
    |-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
    |-2322 /usr/lib/xfce4/xfconf/xfconfd
    |-2376 firefox
    |-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
    └┼─$─┤▶ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    └┼─$─┤▶ aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    sysdefault:CARD=PCH
    HDA Intel PCH, CX20590 Analog
    Default Audio Device
    front:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    Front speakers
    surround40:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=PCH,DEV=0
    HDA Intel PCH, CX20590 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=PCH,DEV=0
    HDA Intel PCH, HDMI 0
    HDMI Audio Output
    hdmi:CARD=PCH,DEV=1
    HDA Intel PCH, HDMI 1
    HDMI Audio Output
    hdmi:CARD=PCH,DEV=2
    HDA Intel PCH, HDMI 2
    HDMI Audio Output
    Don't really know what else to provide...
    About my setup it's a thinkpad t420 not plugged in any hdmi screen or simething like that
    Thank you
    Last edited by Truc (2014-04-19 13:15:28)

    └┼─$─┤▶ fuser -v /dev/snd/*
    USER PID ACCESS COMMAND
    /dev/snd/controlC0: unkn0wn 2231 F.... volumeicon
    └┼─$─┤▶ speaker-test -c 2 -t wav -D plughw:0,0
    speaker-test 1.0.27.2
    Playback device is plughw:0,0
    Stream parameters are 48000Hz, S16_LE, 2 channels
    WAV file(s)
    Playback open error: -16,Device or resource busy
    It says it's busy but I don't see anything that could use it. I quit skype before trying

Maybe you are looking for

  • Windows stops responding and closes when I try to print

    I have IE 9 on a vista 64 bit.  Recently I had some problems with print jobs staying in the que.  I resolved that and reinstalled the printer and drivers.  I have a photosmart 5514.  Ever since that day I can't print off a webpage.  Coupons, bank sta

  • USB device not recognized in Windows 7?

    I have the strangest problem I've yet to encounter with my computer. As you may have guessed from the title, I am constantly getting the message displayed.  Any fix that has been suggested has been unhelpful or worked for a bit until my computer rest

  • Running Java Programm as a Service

    i am using java service wrapper to run my program as a service i am getting this error i run the process by saying ./JSWrapper console this is my wrapper.conf # Wrapper License Properties (Ignored by Community Edition) # Include file problems can be

  • Backup amd File Storage Question

    I've got a bit of a conundrum on my hands and can't decide how to clean it up. I live in a Mac world and work in a Win world. I made the tranitiin from a dell notebook to a MacBook Air and have a Mac Mini on the desktop at home. I have tons of photos

  • Safari Graphics Issues 10.6.5 help !!!

    Hello! I bought a Macbook Pro 15 one month ago and im very satisfied but i realized that Safari 5.0 has some graphics issues displaying web pages. (not only top sites) There have been an update (Comboupdate 10.6.2) for those graphics issues but since