[SOLVED] No sound in latest flashplugin
I recently upgraded my flasplugin to 10.3.183.5-1.
Since then no sound (in any browser : FF or opera).
I'm running the latest kernel (3.0.3-1)
Anybody having the same problem ?
Last edited by Strider (2011-08-19 21:00:36)
Hm,
my flashplugin is working again with sound ...
No clue why that happened all of sudden.
Anyway the problem is gone So I'll mark this as solved for now.
Similar Messages
-
[SOLVED]no sound in smplayer and vlc,while the flashplugine has sound.
After the installation of archlinux with the kernel sound component alsa ,I installed vlc,mplayer,smplayer,and smplayer by pacman.now,I can hear sound in the firefox flashplugine,but there are only pictures when I use vlc or smplayer to play movies.I has tried to modified the mplayer config file to set ao=alsa,or modified the audio output driver and channels options by SMPlayer Gui,but it doesn't work.I'm sure the volumn is set to max value and mute option is off.
Thanks for any advice.
The problem is that dbus daemon was not running while playing movies by smplayer,start dbus daemon and add dbus daemon to rc.conf,fixed.
Last edited by XuYimin (2011-12-09 13:41:29)Are you using Pulseaudio?
See:
https://bbs.archlinux.org/viewtopic.php?id=115748
https://wiki.archlinux.org/index.php/Fl … d_playback
https://bbs.archlinux.org/viewtopic.php?id=126458
GIYF -
[SOLVED] No sound anymore after latest upgrade
Hello,
i did the following upgrade
[2014-01-25 16:06] [PACMAN] starting full system upgrade
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Füge Schlüssel aus archlinux.gpg hinzu ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: 3 marginal-needed, 1 complete-needed, PGP Vertrauensmodell
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 0 gültig: 1 signiert: 5 Vertrauen: 0-, 0q, 0n, 0m, 0f, 1u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 1 gültig: 5 signiert: 59 Vertrauen: 0-, 0q, 0n, 5m, 0f, 0u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: Tiefe: 2 gültig: 59 signiert: 4 Vertrauen: 59-, 0q, 0n, 0m, 0f, 0u
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: nächste "Trust-DB"-Pflichtüberprüfung am 2016-01-22
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Signiere die vertrauenswürdigen Schlüssel im Schlüsselbund lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 0E8B644079F599DFC1DDC3973348882F6AC6A4C2 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 684148BB25B49E986A4944C55184252D824B18E8 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 44D4A033AC140143927397D47EFD567D4C7EA887 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel 27FFC4769E19F096D41D9265A04F9397CDFD6BB0 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Signiere Schlüssel AB19265E5D7D20687D303246BA1DFB64FFF979E7 lokal ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Importiere die Vertrauenswerte des Benutzers ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Mache widerrufene Schlüssel im Schlüsselbund unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel F5A361A3A13554B85E57DDDAAF7EF7873CFD4BB6 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 7FA647CD89891DEDC060287BB9113D1ED21E1A55 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel BC1FBE4D2826A0B51E47ED62E2539214C6C11350 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 4A8B17E20B88ACA61860009B5CED81B7C2E5C0D2 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 63F395DE2D6398BBE458F281F2DBB4931985A992 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 0B20CA1931F5DA3A70D0F8D2EA6836E1AB441196 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 8F76BEEA0289F9E1D3E229C05F946DED983D4366 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 66BD74A036D522F51DD70A3C7F2A16726521E06D unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel 81D7F8241DB38BC759C80FCE3A726C6170E80477 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Mache Schlüssel E7210A59715F6940CF9A4E36A001876699AD6E84 unbrauchbar ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Aktualisiere Trust-Datenbank ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] gpg: nächste "Trust-DB"-Pflichtüberprüfung am 2016-01-22
[2014-01-25 17:38] [PACMAN] upgraded archlinux-keyring (20140108-1 -> 20140124-1)
[2014-01-25 17:38] [PACMAN] upgraded libdrm (2.4.51-1 -> 2.4.52-1)
[2014-01-25 17:38] [PACMAN] upgraded wayland (1.3.0-1 -> 1.4.0-1)
[2014-01-25 17:38] [PACMAN] upgraded libdbus (1.6.18-3 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded dbus (1.6.18-3 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded libgcrypt (1.5.3-1 -> 1.6.0-2)
[2014-01-25 17:38] [PACMAN] upgraded systemd (208-3 -> 208-10)
[2014-01-25 17:38] [PACMAN] upgraded llvm-libs (3.3-1 -> 3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded mesa (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded mesa-libgl (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded ati-dri (10.0.1-2 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded bluez (5.13-1 -> 5.14-1)
[2014-01-25 17:38] [PACMAN] upgraded xdg-utils (1.1.0.git20130520-1 -> 1.1.0.git20140109-1)
[2014-01-25 17:38] [PACMAN] upgraded chromium (31.0.1650.63-1 -> 32.0.1700.77-1)
[2014-01-25 17:38] [PACMAN] upgraded gdk-pixbuf2 (2.30.2-1 -> 2.30.3-1)
[2014-01-25 17:38] [PACMAN] upgraded cogl (1.16.0-3 -> 1.16.2-1)
[2014-01-25 17:38] [PACMAN] upgraded clutter (1.16.2-1 -> 1.16.4-1)
[2014-01-25 17:38] [PACMAN] upgraded device-mapper (2.02.104-1 -> 2.02.105-1)
[2014-01-25 17:38] [PACMAN] upgraded cryptsetup (1.6.3-1 -> 1.6.3-2)
[2014-01-25 17:38] [PACMAN] upgraded curl (7.34.0-2 -> 7.34.0-3)
[2014-01-25 17:38] [PACMAN] upgraded cython (0.19.2-1 -> 0.20-1)
[2014-01-25 17:38] [PACMAN] upgraded pth (2.0.7-4 -> 2.0.7-5)
[2014-01-25 17:38] [PACMAN] upgraded dirmngr (1.1.1-1 -> 1.1.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gnutls (3.2.8-1 -> 3.2.9-1)
[2014-01-25 17:38] [PACMAN] upgraded libvorbis (1.3.3-1 -> 1.3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded ffmpeg (1:2.1.1-3 -> 1:2.1.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gcr (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gdbm (1.10-3 -> 1.11-1)
[2014-01-25 17:38] [PACMAN] upgraded gedit (3.10.3-1 -> 3.10.4-1)
[2014-01-25 17:38] [PACMAN] upgraded gettext (0.18.3.1-2 -> 0.18.3.2-1)
[2014-01-25 17:38] [PACMAN] upgraded libcups (1.7.0-2 -> 1.7.1-3)
[2014-01-25 17:38] [PACMAN] installed libpaper (1.1.24-7)
[2014-01-25 17:38] [PACMAN] upgraded ghostscript (9.10-1 -> 9.10-3)
[2014-01-25 17:38] [PACMAN] upgraded glamor-egl (0.5.1-1 -> 0.5.1.r258-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-chess (3.10.2-2 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-desktop (1:3.10.1-2 -> 1:3.10.2-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-keyring (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded gnome-online-miners (3.10.2-1 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded libsecret (0.16-1 -> 0.16-2)
[2014-01-25 17:38] [PACMAN] upgraded mutter (3.10.2-2 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnome-shell (3.10.2.1-4 -> 3.10.3-1)
[2014-01-25 17:38] [PACMAN] upgraded gnupg (2.0.22-1 -> 2.0.22-2)
[2014-01-25 17:38] [PACMAN] upgraded grilo-plugins (0.2.9-2 -> 0.2.9-3)
[2014-01-25 17:38] [PACMAN] upgraded gstreamer0.10-ugly (0.10.19-8 -> 0.10.19-9)
[2014-01-25 17:38] [PACMAN] upgraded libcdio (0.90-2 -> 0.92-1)
[2014-01-25 17:38] [PACMAN] upgraded gstreamer0.10-ugly-plugins (0.10.19-8 -> 0.10.19-9)
[2014-01-25 17:38] [PACMAN] upgraded gtk-vnc (0.5.3-1 -> 0.5.3-3)
[2014-01-25 17:38] [PACMAN] upgraded libcdio-paranoia (10.2+0.90+1-1 -> 10.2+0.90+1-2)
[2014-01-25 17:38] [PACMAN] upgraded gvfs (1.18.3-1 -> 1.18.3-3)
[2014-01-25 17:38] [PACMAN] upgraded python-dbus-common (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded python2-dbus (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded libibus (1.5.4-3 -> 1.5.5-1)
[2014-01-25 17:38] [PACMAN] upgraded ibus (1.5.4-3 -> 1.5.5-1)
[2014-01-25 17:38] [PACMAN] upgraded inetutils (1.9.1.341-2 -> 1.9.2-1)
[2014-01-25 17:38] [PACMAN] upgraded iptables (1.4.20-1 -> 1.4.21-1)
[2014-01-25 17:38] [PACMAN] upgraded iproute2 (3.11.0-1 -> 3.12.0-1)
[2014-01-25 17:38] [PACMAN] upgraded isl (0.12.1-2 -> 0.12.2-1)
[2014-01-25 17:38] [PACMAN] upgraded jack (0.121.3-7 -> 0.124.1-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-dbus (1.6.18-1 -> 1.8.0-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-gettext (0.18.3.1-1 -> 0.18.3.2-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libcap (2.22-2 -> 2.24-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libdrm (2.4.51-1 -> 2.4.52-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-libgcrypt (1.5.3-1 -> 1.6.0-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-llvm-libs (3.3-1 -> 3.4-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-systemd (208-1 -> 208-2)
[2014-01-25 17:38] [PACMAN] upgraded lib32-mesa (10.0.1-1 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded lib32-mesa-libgl (10.0.1-1 -> 10.0.2-1)
[2014-01-25 17:38] [PACMAN] upgraded libxslt (1.1.28-2 -> 1.1.28-3)
[2014-01-25 17:38] [PACMAN] upgraded libgda (5.2.1-1 -> 5.2.1-2)
[2014-01-25 17:38] [PACMAN] upgraded libgnome-keyring (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:38] [PACMAN] upgraded libraw (0.15.4-3 -> 0.16.0-1)
[2014-01-25 17:38] [PACMAN] upgraded rasqal (1:0.9.30-3 -> 1:0.9.30-4)
[2014-01-25 17:38] [PACMAN] upgraded redland (1:1.0.16-2 -> 1:1.0.17-1)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-common (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-base (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-calc (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-draw (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-gnome (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-impress (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-math (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libreoffice-writer (4.1.4-1 -> 4.1.4-3)
[2014-01-25 17:38] [PACMAN] upgraded libwbclient (4.1.3-1 -> 4.1.4-1)
[2014-01-25 17:38] [PACMAN] upgraded linux-firmware (20131013.7d0c7a8-1 -> 20140123.418320b-1)
[2014-01-25 17:38] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
[2014-01-25 17:38] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Starting build: 3.12.8-1-ARCH
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [base]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [udev]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [block]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
[2014-01-25 17:38] [ALPM-SCRIPTLET] -> Running build hook: [fsck]
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Generating module dependencies
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2014-01-25 17:38] [ALPM-SCRIPTLET] ==> Image generation successful
[2014-01-25 17:38] [PACMAN] upgraded linux (3.12.7-1 -> 3.12.8-1)
[2014-01-25 17:38] [PACMAN] upgraded lvm2 (2.02.104-1 -> 2.02.105-1)
[2014-01-25 17:38] [PACMAN] upgraded man-pages (3.55-1 -> 3.56-1)
[2014-01-25 17:38] [PACMAN] upgraded pcre (8.34-1 -> 8.34-2)
[2014-01-25 17:38] [PACMAN] upgraded perl (5.18.1-1 -> 5.18.2-2)
[2014-01-25 17:38] [PACMAN] upgraded procps-ng (3.3.9-1 -> 3.3.9-2)
[2014-01-25 17:38] [PACMAN] upgraded python-dbus (1.2.0-1 -> 1.2.0-2)
[2014-01-25 17:38] [PACMAN] upgraded s-nail (14.5.1-1 -> 14.5.2-1)
[2014-01-25 17:39] [PACMAN] upgraded webkitgtk (2.2.3-1 -> 2.2.4-1)
[2014-01-25 17:39] [PACMAN] upgraded shotwell (0.15.1-1 -> 0.15.1-2)
[2014-01-25 17:39] [PACMAN] upgraded smbclient (4.1.3-1 -> 4.1.4-1)
[2014-01-25 17:39] [PACMAN] upgraded sudo (1.8.8-1 -> 1.8.9.p4-1)
[2014-01-25 17:39] [PACMAN] upgraded systemd-sysvcompat (208-3 -> 208-10)
[2014-01-25 17:39] [PACMAN] upgraded totem-plparser (3.10.0-3 -> 3.10.0-4)
[2014-01-25 17:39] [PACMAN] upgraded vino (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:39] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2014-01-25 17:39] [PACMAN] upgraded virtualbox-host-modules (4.3.6-3 -> 4.3.6-4)
[2014-01-25 17:39] [PACMAN] upgraded virtualbox (4.3.6-2 -> 4.3.6-3)
[2014-01-25 17:39] [PACMAN] upgraded vlc (2.1.2-2 -> 2.1.2-3)
[2014-01-25 17:39] [PACMAN] upgraded wine (1.7.10-1 -> 1.7.11-1)
[2014-01-25 17:39] [PACMAN] upgraded xextproto (7.2.1-1 -> 7.3.0-1)
[2014-01-25 17:39] [PACMAN] upgraded xf86-input-evdev (2.8.2-1 -> 2.8.2-2)
[2014-01-25 17:39] [PACMAN] upgraded xf86-video-ati (1:7.2.0-1 -> 1:7.2.0-2)
[2014-01-25 17:39] [PACMAN] upgraded xorg-server-common (1.14.5-2 -> 1.15.0-5)
[2014-01-25 17:39] [PACMAN] installed libxshmfence (1.1-1)
[2014-01-25 17:39] [PACMAN] upgraded xorg-server (1.14.5-2 -> 1.15.0-5)
[2014-01-25 17:39] [PACMAN] upgraded yelp (3.10.1-1 -> 3.10.1-2)
[2014-01-25 17:39] [PACMAN] upgraded youtube-dl (2014.01.17.2-1 -> 2014.01.23.4-1)
And dont have any sound anymore, nowhere. PulseAudio is just ignoring my sound-card completely and KDE/GNOME System settings tell me that i do not even have any soundcard
Alsamixer detects the soundcard fine and if i unmute the soundcard there, it works. But its not really comfortable to change the volume with Alsamixer. Also i have no ability to change between HDMI and Analog.
Any idea what could have cause this? As you can see in the logs, there havent been any major kernel update nor pulseaudio update.
This is the Soundcard: Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
Kernel Module is snd_hda_intel which is loaded and working
Seems like Pulseaudio is not running at all, it also does not start with the message "E: [pulseaudio] core-util.c: Home directory not accessible: Permission denied" which is not true
Last edited by Vamp898 (2014-01-26 15:29:22)Ok, found out it was true.
Seems like whatever reason i have to find out reset some files (not all) to root, so i was no longer the owner of some random files for whatever reason.
Works now. -
(Solved) one sound application at a time
hello,archers! I moved from gnome to Kde(at last) and faced the issue. E.G if amarok plays musik there's no system notifications and smplayer plays no sound t.i only one programm can use alsa at a time. I have latest kde, alsa and gstreamer and xine backends for phonon. alsamixer shows everything's ok. What should I do? thnx.
Last edited by off220 (2011-01-15 10:30:01)Ok. I've been able to solve the problem by creating /home/user/.asoundrc file with this content
pcm.softvolPhonon {
type softvol
slave.pcm "default:CARD=0"
control {
name "Phonon"
card 0
min_dB -51.0
max_dB 0.0
resolution 100
hint {
show on
description "My Soundcard with extra Volume Control"
Then I just choose Phonon as the mail output in sound preferences. Solved. -
[SOLVED] No sound in Flash Plugins - Xonar D2X
There is no sound at all when I play any flash content, but my sound works for other applications no problem.
I'm running Google Chrome's built-in flash plugin
I'm running Pulse Audio with ALSA. I have installed pulseaudio and pulseaudio-alsa
I'm using Google Chrome's stable version from the AUR: google-chrome
My system is 64-bit
The Pulse Audio server is running fine
My sound card is an Asus Xonar D2X
I have the following kernel modules loaded that are associated with sound:
lsmod output
snd_virtuoso 33542 2
snd_oxygen_lib 29893 1 snd_virtuoso
snd_mpu401_uart 5827 1 snd_oxygen_lib
snd_rawmidi 18710 1 snd_mpu401_uart
snd_seq_device 5188 1 snd_rawmidi
snd_pcm 77645 1 snd_oxygen_lib
snd_page_alloc 7242 1 snd_pcm
snd_timer 18726 1 snd_pcm
snd 59109 11 snd_timer,snd_pcm,snd_rawmidi,snd_virtuoso,snd_oxygen_lib,snd_mpu401_uart,snd_seq_device
soundcore 5450 1 snd
Here is a list of my active sound devices if of interest:
aplay -l output
**** List of PLAYBACK Hardware Devices ****
card 0: D2X [Xonar D2X], device 0: Multichannel [Multichannel]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: D2X [Xonar D2X], device 1: Digital [Digital]
Subdevices: 1/1
Subdevice #0: subdevice #0
I have tried using the flash plugin in the official repositories: flashplugin .
There was no change.
I am out of ideas to attempt, what can I do to fix it?
Last edited by finalfortune (2014-02-12 10:38:48)Okay, my sound now magically works for flash. I initially had not restarted my pc after installing the above mentioned pulseaudio packages. I didn't think it necessary, not even sure if it is the restart that fixed it, but problem solved.
Though i did change my .asound.rc from
pcm.!default {
type plug
slave {
pcm "hw:0,0"
ctl.!default {
type hw
card 0
to
pcm.!default {
type hw
card 0
ctl.!default {
type hw
card 0
Not sure if that did anything
Last edited by finalfortune (2014-02-12 10:25:36) -
Surround Sound now overwhelms other sounds after latest update
My surround sound was incredible! But now after the latest updates, I can hardly hear the actors speaking due to the surround sound being so loud. How can I fix this? Or how can I "undo" the update?
I have a Carbon X1
Solved!
Go to Solution.Hi Ezra,
Welcome to Lenovo Community!
I’m sorry to hear that you are facing the issue with Audio drivers on ThinkPad X1 Carbon.
I suggest you to uninstall the updated audio application from control panel – program and feature option. And after uninstalling please download the drivers from Lenovo driver’s page and install it.
Below is the link to enter the downloads page and install exact Touchpad drivers accordingly, please click on "Select Product" then in "QUICK PATH" enter the MTM no. select the exact model.
http://support.lenovo.com/en_US/downloads/default.page#
Hope this helps. Do post back if issue persists!
Best regards,
Hemanth Kumar
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter! -
[Solved] No sound after upgrade
After an upgrade I get no sound out of my speakers. Following packages have been upgraded:
[2011-08-11 09:38] Running 'pacman -Sy'
[2011-08-11 09:38] synchronizing package lists
[2011-08-11 09:39] Running 'pacman -S testing/filesystem testing/dash testing/wget extra/gstreamer0.10-good extra/imagemagick extra/gstreamer0.10-base extra/gstreamer0.10-base-plugins extra/gstreamer0.10-good-plugins extra/flac extra/libogg extra/libisofs extra/ghostscript extra/libburn'
[2011-08-11 09:39] warning: /etc/fstab installed as /etc/fstab.pacnew
[2011-08-11 09:39] upgraded filesystem (2011.04-1 -> 2011.08-1)
[2011-08-11 09:39] upgraded dash (0.5.7-1 -> 0.5.7-2)
[2011-08-11 09:39] upgraded wget (1.12-7 -> 1.13-1)
[2011-08-11 09:39] upgraded gstreamer0.10-base (0.10.34-1 -> 0.10.35-1)
[2011-08-11 09:39] upgraded gstreamer0.10-good (0.10.29-1 -> 0.10.30-1)
[2011-08-11 09:39] upgraded imagemagick (6.7.1.0-1 -> 6.7.1.3-1)
[2011-08-11 09:39] upgraded gstreamer0.10-base-plugins (0.10.34-1 -> 0.10.35-1)
[2011-08-11 09:39] upgraded libogg (1.2.2-1 -> 1.3.0-1)
[2011-08-11 09:39] upgraded flac (1.2.1-2 -> 1.2.1-3)
[2011-08-11 09:39] upgraded gstreamer0.10-good-plugins (0.10.29-1 -> 0.10.30-1)
[2011-08-11 09:39] upgraded libisofs (1.1.2-1 -> 1.1.4-1)
[2011-08-11 09:39] upgraded ghostscript (9.02-2 -> 9.04-2)
[2011-08-11 09:39] upgraded libburn (1.1.0.pl01-1 -> 1.1.4-1)
[2011-08-11 09:40] Running 'pacman -U /tmp/yaourt-tmp-photon-new/PKGDEST.JIQ/flashplugin-beta-11.0.1.98-1-i686.pkg.tar.xz'
[2011-08-11 09:40] upgraded flashplugin-beta (11.0.1.60-2 -> 11.0.1.98-1)
[2011-08-11 09:41] Running 'pacman -R esound'
[2011-08-11 09:41] removed esound (0.2.41-2)
[2011-08-11 09:41] Running 'pacman -R audiofile'
[2011-08-11 09:41] removed audiofile (0.2.7-1)
Concerning the last lines: I removed esound and audiofile because pacman reported that it isn't used by any package any more. Maybe also interesting: I still have kernel 2.6.39 installed since I had some issues with 3.0. Maybe something has been changed to work with 3.0 and is broken with 2.6 now?
I don't really know how to start troubleshooting. speaker-test -c 2 doesn't produce any sound. Restarting alsa seems succesfull but doesn't make the sound appear, too. The loaded modules seem fine, too:
$ lsmod |grep snd
snd_mpu401 3824 0
snd_cs4236 22423 0
snd_emu10k1 121545 1
snd_wavefront 28370 0
snd_intel8x0 22404 1
snd_wss_lib 18084 2 snd_cs4236,snd_wavefront
snd_ac97_codec 90029 2 snd_emu10k1,snd_intel8x0
snd_opl3_lib 7322 2 snd_cs4236,snd_wavefront
snd_mpu401_uart 4951 3 snd_mpu401,snd_cs4236,snd_wavefront
ac97_bus 850 1 snd_ac97_codec
snd_util_mem 1812 1 snd_emu10k1
snd_pcm 60311 5 snd_cs4236,snd_emu10k1,snd_intel8x0,snd_wss_lib,snd_ac97_codec
snd_rawmidi 15295 3 snd_emu10k1,snd_wavefront,snd_mpu401_uart
snd_seq_device 4388 3 snd_emu10k1,snd_opl3_lib,snd_rawmidi
snd_timer 15542 4 snd_emu10k1,snd_wss_lib,snd_opl3_lib,snd_pcm
snd_hwdep 4919 3 snd_emu10k1,snd_wavefront,snd_opl3_lib
snd 43399 18 snd_mpu401,snd_cs4236,snd_emu10k1,snd_wavefront,snd_intel8x0,snd_wss_lib,snd_ac97_codec,snd_opl3_lib,snd_mpu401_uart,snd_pcm,snd_rawmidi,snd_seq_device,snd_timer,snd_hwdep
soundcore 5018 1 snd
snd_page_alloc 5909 4 snd_emu10k1,snd_intel8x0,snd_wss_lib,snd_pcm
Concerning the hardware: The motherboard has an integrated sound chip but it isn't used (or it shouldn't be), the speakers are connected to an Audigy 2ZS PCI card, whose module (snd_emu10k1 as reported by alsaconf) seems to be loaded. Btw, running alsaconf didn't solve the problem, too.
Thanks in advance for any advice,
PhotonX
Solved: Problem disappeared by itself after another update (though no sound related packages were touched this time).
Last edited by PhotonX (2011-08-13 06:11:22)Okay, my sound is working again. I fixed the problem by changing two settings in the pulse audio volume control. The first was to turn off the RV710/730 Digital Stereo (HDMI) output device and the second was to change the Internal Audio profile to Analog Surround 5.1 Output. I don't know if the settings will remain after a reboot or some other change, but they work for now.
-
[solved] No sound, ALSA finds soundcard, pulseaudio does not.
Problem:
pulseaudio can't find my soundcard (or it can't find ALSA, not sure). It falls back to a dummy-output and no input so i can't play sounds or use my mic.
First appeared when:
Installing software updates like a month ago. I ignored it at first in the hopes it will resolve itself with the next update an few dates later. It didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name. So i guess it just triggered the problem in a indirect way.
What did not help:
Reinstalling packets with pulse|alsa|sound|audio in its name.
Deleting ${HOME}/.pulse* .
Rebooting.
Resetting /etc/pulse/* or /etc/asound.conf to the defaults of the packaes they come with.
Adding or removing my user to the audio group.
Googling. Other threads i this forum.
Additional infos:
(Stuff that was requested from others which had similar problems. No other [solved]-threads were helping me so far.)
/dev/dsp does not exist.
fuser -v /dev/snd/* returns nothing
aplay whatever.wav produces no sound.
aplay -D sysdefault whatever.wav works.
Using Gnome 3 started with gdm.
aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC272 Analog [ALC272 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: Intel [HDA Intel], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=Intel
HDA Intel, ALC272 Analog
Default Audio Device
front:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
Front speakers
surround40:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Intel,DEV=0
HDA Intel, ALC272 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=Intel,DEV=0
HDA Intel, HDMI 0
HDMI Audio Output
dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.6.7-1-ARCH (tobias@T-POWA-LX) (gcc version 4.7.2 (GCC) ) #1 SMP PREEMPT Sun Nov 18 10:11:22 CET 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009f3ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f400-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d2000-0x00000000000d3fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000000d8000-0x00000000000fffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000b76a0fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b76a1000-0x00000000b76a6fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b76a7000-0x00000000b77d1fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b77d2000-0x00000000b780efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b780f000-0x00000000b7908fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7909000-0x00000000b7b0efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b0f000-0x00000000b7b18fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b19000-0x00000000b7b1efff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b7b1f000-0x00000000b7b62fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7b63000-0x00000000b7b9efff] ACPI NVS
[ 0.000000] BIOS-e820: [mem 0x00000000b7b9f000-0x00000000b7be4fff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7be5000-0x00000000b7bfefff] ACPI data
[ 0.000000] BIOS-e820: [mem 0x00000000b7bff000-0x00000000b7bfffff] usable
[ 0.000000] BIOS-e820: [mem 0x00000000b7c00000-0x00000000b7dfffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000b8000000-0x00000000bfffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000efffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed003ff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed10000-0x00000000fed13fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed18000-0x00000000fed19fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed8ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI present.
[ 0.000000] DMI: Dell Inc. Inspiron 1370/0R8PR3, BIOS A01 09/15/2009
[ 0.000000] e820: update [mem 0x00000000-0x0000ffff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] No AGP bridge found
[ 0.000000] e820: last_pfn = 0xb7c00 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-D3FFF write-protect
[ 0.000000] D4000-DBFFF uncachable
[ 0.000000] DC000-EFFFF write-back
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 0B8000000 mask FF8000000 uncachable
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 0FFE40000 mask FFFFC0000 write-protect
[ 0.000000] 4 base 0B7E00000 mask FFFE00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] found SMP MP-table at [mem 0x000f6bf0-0x000f6bff] mapped at [ffff8800000f6bf0]
[ 0.000000] initial memory mapped: [mem 0x00000000-0x1fffffff]
[ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 24576
[ 0.000000] init_memory_mapping: [mem 0x00000000-0xb7bfffff]
[ 0.000000] [mem 0x00000000-0xb7bfffff] page 2M
[ 0.000000] kernel direct mapping tables up to 0xb7bfffff @ [mem 0x1fffc000-0x1fffffff]
[ 0.000000] RAMDISK: [mem 0x376e2000-0x37b68fff]
[ 0.000000] ACPI: RSDP 00000000000f6b10 00024 (v02 DELL )
[ 0.000000] ACPI: XSDT 00000000b7bf7369 00064 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: FACP 00000000b7be7000 000F4 (v03 TOSCPL CRESTLNE 06040000 ALAN 00000001)
[ 0.000000] ACPI: DSDT 00000000b7be8000 077A9 (v02 Dell CANTIGA 06040000 INTL 20060608)
[ 0.000000] ACPI: FACS 00000000b7b9efc0 00040
[ 0.000000] ACPI: HPET 00000000b7bfed16 00038 (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: MCFG 00000000b7bfed4e 0003C (v01 INTEL CRESTLNE 06040000 LOHR 0000005A)
[ 0.000000] ACPI: OSFR 00000000b7bfed8a 00070 (v01 DELL DELL 06040000 ASL 00000061)
[ 0.000000] ACPI: APIC 00000000b7bfedfa 00068 (v01 PTLTD ? APIC 06040000 LTP 00000000)
[ 0.000000] ACPI: BOOT 00000000b7bfee62 00028 (v01 PTLTD $SBFTBL$ 06040000 LTP 00000001)
[ 0.000000] ACPI: SLIC 00000000b7bfee8a 00176 (v01 DELL CL09 06040000 LTP 00000000)
[ 0.000000] ACPI: SSDT 00000000b7be6000 00655 (v01 PmRef CpuPm 00003000 INTL 20050624)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at [mem 0x0000000000000000-0x00000000b7bfffff]
[ 0.000000] Initmem setup node 0 [mem 0x00000000-0xb7bfffff]
[ 0.000000] NODE_DATA [mem 0xb7be1000-0xb7be4fff]
[ 0.000000] [ffffea0000000000-ffffea0002dfffff] PMD -> [ffff8800b4000000-ffff8800b6dfffff] on node 0
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00010000-0x00ffffff]
[ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
[ 0.000000] Normal empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00010000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0xb76a0fff]
[ 0.000000] node 0: [mem 0xb76a7000-0xb77d1fff]
[ 0.000000] node 0: [mem 0xb780f000-0xb7908fff]
[ 0.000000] node 0: [mem 0xb7b0f000-0xb7b18fff]
[ 0.000000] node 0: [mem 0xb7b1f000-0xb7b62fff]
[ 0.000000] node 0: [mem 0xb7b9f000-0xb7be4fff]
[ 0.000000] node 0: [mem 0xb7bff000-0xb7bfffff]
[ 0.000000] On node 0 totalpages: 751850
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 6 pages reserved
[ 0.000000] DMA zone: 3913 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 11696 pages used for memmap
[ 0.000000] DMA32 zone: 736171 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] smpboot: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000d2000
[ 0.000000] PM: Registered nosave memory: 00000000000d2000 - 00000000000d4000
[ 0.000000] PM: Registered nosave memory: 00000000000d4000 - 00000000000d8000
[ 0.000000] PM: Registered nosave memory: 00000000000d8000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 00000000b76a1000 - 00000000b76a7000
[ 0.000000] PM: Registered nosave memory: 00000000b77d2000 - 00000000b780f000
[ 0.000000] PM: Registered nosave memory: 00000000b7909000 - 00000000b7b0f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b19000 - 00000000b7b1f000
[ 0.000000] PM: Registered nosave memory: 00000000b7b63000 - 00000000b7b9f000
[ 0.000000] PM: Registered nosave memory: 00000000b7be5000 - 00000000b7bff000
[ 0.000000] e820: [mem 0xc0000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff8800b7400000 s84608 r8192 d21888 u1048576
[ 0.000000] pcpu-alloc: s84608 r8192 d21888 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 740084
[ 0.000000] Policy zone: DMA32
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux cryptdevice=/dev/sda7:root root=/dev/mapper/root ro quiet init=/bin/systemd
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] __ex_table already sorted, skipping sort
[ 0.000000] xsave: enabled xstate_bv 0x3, cntxt size 0x240
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
[ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
[ 0.000000] Memory: 2944188k/3010560k available (4727k kernel code, 3160k absent, 63212k reserved, 4143k data, 772k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:4352 nr_irqs:512 16
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 12058624 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1296.696 MHz processor
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 2594.45 BogoMIPS (lpj=4322320)
[ 0.003343] pid_max: default: 32768 minimum: 301
[ 0.003400] Security Framework initialized
[ 0.003407] AppArmor: AppArmor disabled by boot time parameter
[ 0.003948] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.006850] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.008132] Mount-cache hash table entries: 256
[ 0.008498] Initializing cgroup subsys cpuacct
[ 0.008503] Initializing cgroup subsys memory
[ 0.008517] Initializing cgroup subsys devices
[ 0.008520] Initializing cgroup subsys freezer
[ 0.008522] Initializing cgroup subsys net_cls
[ 0.008525] Initializing cgroup subsys blkio
[ 0.008570] CPU: Physical Processor ID: 0
[ 0.008572] CPU: Processor Core ID: 0
[ 0.008575] mce: CPU supports 6 MCE banks
[ 0.008587] CPU0: Thermal monitoring enabled (TM2)
[ 0.008592] process: using mwait in idle threads
[ 0.008600] Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift is 0xffffffff
[ 0.010851] ACPI: Core revision 20120711
[ 0.016699] ftrace: allocating 18348 entries in 72 pages
[ 0.027201] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.061706] smpboot: CPU0: Genuine Intel(R) CPU U7300 @ 1.30GHz stepping 0a
[ 0.063329] Performance Events: PEBS fmt0+, 4-deep LBR, Core2 events, Intel PMU driver.
[ 0.063329] ... version: 2
[ 0.063329] ... bit width: 40
[ 0.063329] ... generic registers: 2
[ 0.063329] ... value mask: 000000ffffffffff
[ 0.063329] ... max period: 000000007fffffff
[ 0.063329] ... fixed-purpose events: 3
[ 0.063329] ... event mask: 0000000700000003
[ 0.086782] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.100007] smpboot: Booting Node 0, Processors #1 OK
[ 0.113162] Brought up 2 CPUs
[ 0.113162] smpboot: Total of 2 processors activated (5188.90 BogoMIPS)
[ 0.113436] devtmpfs: initialized
[ 0.116686] PM: Registering ACPI NVS region [mem 0xb7b63000-0xb7b9efff] (245760 bytes)
[ 0.121465] NET: Registered protocol family 16
[ 0.121699] ACPI: bus type pci registered
[ 0.121824] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.121828] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.174683] PCI: Using configuration type 1 for base access
[ 0.175619] bio: create slab <bio-0> at 0
[ 0.175619] ACPI: Added _OSI(Module Device)
[ 0.175619] ACPI: Added _OSI(Processor Device)
[ 0.175619] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.175619] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.178073] ACPI: EC: Look up EC in DSDT
[ 0.182902] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.188123] ACPI: SSDT 00000000b7b1aca0 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188671] ACPI: Dynamic OEM Table Load:
[ 0.188676] ACPI: SSDT (null) 00223 (v01 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.188875] ACPI: SSDT 00000000b7b19620 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189399] ACPI: Dynamic OEM Table Load:
[ 0.189404] ACPI: SSDT (null) 00568 (v01 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.189425] ACPI: SSDT 00000000b7b1aa20 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190407] ACPI: Dynamic OEM Table Load:
[ 0.190412] ACPI: SSDT (null) 001CF (v01 PmRef ApIst 00003000 INTL 20050624)
[ 0.190429] ACPI: SSDT 00000000b7b1af20 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190693] ACPI: Dynamic OEM Table Load:
[ 0.190698] ACPI: SSDT (null) 0008D (v01 PmRef ApCst 00003000 INTL 20050624)
[ 0.190715] ACPI: Interpreter enabled
[ 0.190715] ACPI: (supports S0 S3 S4 S5)
[ 0.190715] ACPI: Using IOAPIC for interrupt routing
[ 0.323314] ACPI: EC: GPE = 0x1c, I/O: command/status = 0x66, data = 0x62
[ 0.323314] ACPI: No dock devices found.
[ 0.323314] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.323314] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.323314] PCI host bridge to bus 0000:00
[ 0.323314] pci_bus 0000:00: busn_res: [bus 00-ff] is inserted under domain [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.323314] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xc0000000-0xdfffffff]
[ 0.323314] pci_bus 0000:00: root bus resource [mem 0xf0000000-0xfebfffff]
[ 0.323314] pci 0000:00:00.0: [8086:2a40] type 00 class 0x060000
[ 0.323314] DMAR: Forcing write-buffer flush capability
[ 0.323314] DMAR: Disabling IOMMU for graphics on this chipset
[ 0.323314] pci 0000:00:02.0: [8086:2a42] type 00 class 0x030000
[ 0.323314] pci 0000:00:02.0: reg 10: [mem 0xf0000000-0xf03fffff 64bit]
[ 0.323314] pci 0000:00:02.0: reg 18: [mem 0xd0000000-0xdfffffff 64bit pref]
[ 0.323314] pci 0000:00:02.0: reg 20: [io 0x1800-0x1807]
[ 0.323314] pci 0000:00:02.1: [8086:2a43] type 00 class 0x038000
[ 0.323314] pci 0000:00:02.1: reg 10: [mem 0xf0400000-0xf04fffff 64bit]
[ 0.323314] pci 0000:00:1a.0: [8086:2937] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.0: reg 20: [io 0x1820-0x183f]
[ 0.323314] pci 0000:00:1a.1: [8086:2938] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.1: reg 20: [io 0x1840-0x185f]
[ 0.323314] pci 0000:00:1a.2: [8086:2939] type 00 class 0x0c0300
[ 0.323314] pci 0000:00:1a.2: reg 20: [io 0x1860-0x187f]
[ 0.323314] pci 0000:00:1a.7: [8086:293c] type 00 class 0x0c0320
[ 0.323314] pci 0000:00:1a.7: reg 10: [mem 0xf0804800-0xf0804bff]
[ 0.323314] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold
[ 0.323314] pci 0000:00:1b.0: [8086:293e] type 00 class 0x040300
[ 0.323314] pci 0000:00:1b.0: reg 10: [mem 0xf0800000-0xf0803fff 64bit]
[ 0.323314] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.323342] pci 0000:00:1c.0: [8086:2940] type 01 class 0x060400
[ 0.323470] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.323513] pci 0000:00:1c.1: [8086:2942] type 01 class 0x060400
[ 0.323640] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.323688] pci 0000:00:1c.5: [8086:294a] type 01 class 0x060400
[ 0.323816] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold
[ 0.323860] pci 0000:00:1d.0: [8086:2934] type 00 class 0x0c0300
[ 0.323931] pci 0000:00:1d.0: reg 20: [io 0x1880-0x189f]
[ 0.324017] pci 0000:00:1d.1: [8086:2935] type 00 class 0x0c0300
[ 0.324087] pci 0000:00:1d.1: reg 20: [io 0x18a0-0x18bf]
[ 0.324173] pci 0000:00:1d.2: [8086:2936] type 00 class 0x0c0300
[ 0.324243] pci 0000:00:1d.2: reg 20: [io 0x18c0-0x18df]
[ 0.324346] pci 0000:00:1d.7: [8086:293a] type 00 class 0x0c0320
[ 0.324379] pci 0000:00:1d.7: reg 10: [mem 0xf0804c00-0xf0804fff]
[ 0.324516] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.324552] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.324666] pci 0000:00:1f.0: [8086:2917] type 00 class 0x060100
[ 0.324866] pci 0000:00:1f.2: [8086:2929] type 00 class 0x010601
[ 0.324900] pci 0000:00:1f.2: reg 10: [io 0x1818-0x181f]
[ 0.324915] pci 0000:00:1f.2: reg 14: [io 0x180c-0x180f]
[ 0.324931] pci 0000:00:1f.2: reg 18: [io 0x1810-0x1817]
[ 0.324946] pci 0000:00:1f.2: reg 1c: [io 0x1808-0x180b]
[ 0.324960] pci 0000:00:1f.2: reg 20: [io 0x18e0-0x18ff]
[ 0.324975] pci 0000:00:1f.2: reg 24: [mem 0xf0804000-0xf08047ff]
[ 0.325062] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.325096] pci 0000:00:1f.3: [8086:2930] type 00 class 0x0c0500
[ 0.325123] pci 0000:00:1f.3: reg 10: [mem 0x00000000-0x000000ff 64bit]
[ 0.325160] pci 0000:00:1f.3: reg 20: [io 0x1c00-0x1c1f]
[ 0.325277] pci_bus 0000:02: busn_res: [bus 02] is inserted under [bus 00-ff]
[ 0.325283] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.325366] pci_bus 0000:08: busn_res: [bus 08] is inserted under [bus 00-ff]
[ 0.325632] pci 0000:08:00.0: [14e4:4315] type 00 class 0x028000
[ 0.325707] pci 0000:08:00.0: reg 10: [mem 0xf0500000-0xf0503fff 64bit]
[ 0.326109] pci 0000:08:00.0: supports D1 D2
[ 0.326112] pci 0000:08:00.0: PME# supported from D0 D3hot D3cold
[ 0.326304] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.326314] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.326391] pci_bus 0000:20: busn_res: [bus 20] is inserted under [bus 00-ff]
[ 0.326477] pci 0000:20:00.0: [10ec:8168] type 00 class 0x020000
[ 0.326546] pci 0000:20:00.0: reg 10: [io 0x2000-0x20ff]
[ 0.326670] pci 0000:20:00.0: reg 18: [mem 0xf0904000-0xf0904fff 64bit pref]
[ 0.326745] pci 0000:20:00.0: reg 20: [mem 0xf0900000-0xf0903fff 64bit pref]
[ 0.326794] pci 0000:20:00.0: reg 30: [mem 0x00000000-0x0001ffff pref]
[ 0.327093] pci 0000:20:00.0: supports D1 D2
[ 0.327096] pci 0000:20:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.327302] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.327309] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.327323] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.327363] pci_bus 0000:26: busn_res: [bus 26] is inserted under [bus 00-ff]
[ 0.327435] pci 0000:00:1e.0: PCI bridge to [bus 26] (subtractive decode)
[ 0.327452] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.327456] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.327460] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.327463] pci 0000:00:1e.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.327467] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode)
[ 0.327471] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfebfffff] (subtractive decode)
[ 0.327505] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.327638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
[ 0.327717] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.327766] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.327824] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
[ 0.327883] pci0000:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.327886] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.334993] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335069] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335141] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 *5 6 7 10 12 14 15)
[ 0.335212] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.335283] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.335355] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 *7 11 12 14 15)
[ 0.335424] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.335495] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.336671] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.336689] vgaarb: loaded
[ 0.336691] vgaarb: bridge control possible 0000:00:02.0
[ 0.336769] PCI: Using ACPI for IRQ routing
[ 0.348092] PCI: pci_cache_line_size set to 64 bytes
[ 0.348605] e820: reserve RAM buffer [mem 0x0009f400-0x0009ffff]
[ 0.348608] e820: reserve RAM buffer [mem 0xb76a1000-0xb7ffffff]
[ 0.348614] e820: reserve RAM buffer [mem 0xb77d2000-0xb7ffffff]
[ 0.348619] e820: reserve RAM buffer [mem 0xb7909000-0xb7ffffff]
[ 0.348623] e820: reserve RAM buffer [mem 0xb7b19000-0xb7ffffff]
[ 0.348627] e820: reserve RAM buffer [mem 0xb7b63000-0xb7ffffff]
[ 0.348631] e820: reserve RAM buffer [mem 0xb7be5000-0xb7ffffff]
[ 0.348634] e820: reserve RAM buffer [mem 0xb7c00000-0xb7ffffff]
[ 0.348791] NetLabel: Initializing
[ 0.348794] NetLabel: domain hash size = 128
[ 0.348796] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.348816] NetLabel: unlabeled traffic allowed by default
[ 0.348840] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.348847] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0
[ 0.348855] hpet0: 4 comparators, 64-bit 14.318180 MHz counter
[ 0.370000] Switching to clocksource hpet
[ 0.381464] pnp: PnP ACPI init
[ 0.381496] ACPI: bus type pnp registered
[ 0.382022] pnp 00:00: [bus 00-ff]
[ 0.382027] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.382031] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.382035] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.382039] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.382042] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.382046] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.382050] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.382053] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.382057] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.382060] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.382064] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.382067] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.382071] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.382075] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.382078] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.382086] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.382089] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.382093] pnp 00:00: [mem 0xc0000000-0xdfffffff window]
[ 0.382097] pnp 00:00: [mem 0xf0000000-0xfebfffff window]
[ 0.382100] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
[ 0.382200] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.440057] pnp 00:01: [io 0x0000-0x001f]
[ 0.440061] pnp 00:01: [io 0x0081-0x0091]
[ 0.440065] pnp 00:01: [io 0x0093-0x009f]
[ 0.440068] pnp 00:01: [io 0x00c0-0x00df]
[ 0.440072] pnp 00:01: [dma 4]
[ 0.440121] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.440232] pnp 00:02: [mem 0xfed00000-0xfed003ff]
[ 0.440329] system 00:02: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.440336] system 00:02: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
[ 0.440353] pnp 00:03: [io 0x00f0]
[ 0.440369] pnp 00:03: [irq 13]
[ 0.440414] pnp 00:03: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.440433] pnp 00:04: [io 0x002e-0x002f]
[ 0.440436] pnp 00:04: [io 0x0061]
[ 0.440439] pnp 00:04: [io 0x0063]
[ 0.440443] pnp 00:04: [io 0x0065]
[ 0.440446] pnp 00:04: [io 0x0067]
[ 0.440449] pnp 00:04: [io 0x0070]
[ 0.440452] pnp 00:04: [io 0x0080]
[ 0.440456] pnp 00:04: [io 0x0092]
[ 0.440459] pnp 00:04: [io 0x00b2-0x00b3]
[ 0.440462] pnp 00:04: [io 0x0480-0x048f]
[ 0.440466] pnp 00:04: [io 0xffff]
[ 0.440469] pnp 00:04: [io 0xffff]
[ 0.440472] pnp 00:04: [io 0x0400-0x047f]
[ 0.440475] pnp 00:04: [io 0x1180-0x11ff]
[ 0.440479] pnp 00:04: [io 0xfe00]
[ 0.440482] pnp 00:04: [io 0xff2c-0xff7f]
[ 0.440574] system 00:04: [io 0x0480-0x048f] has been reserved
[ 0.440578] system 00:04: [io 0xffff] has been reserved
[ 0.440583] system 00:04: [io 0xffff] has been reserved
[ 0.440587] system 00:04: [io 0x0400-0x047f] has been reserved
[ 0.440591] system 00:04: [io 0x1180-0x11ff] has been reserved
[ 0.440596] system 00:04: [io 0xfe00] has been reserved
[ 0.440600] system 00:04: [io 0xff2c-0xff7f] has been reserved
[ 0.440606] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.440620] pnp 00:05: [io 0x0070-0x0077]
[ 0.440629] pnp 00:05: [irq 8]
[ 0.440674] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.440691] pnp 00:06: [io 0x0060]
[ 0.440694] pnp 00:06: [io 0x0064]
[ 0.440703] pnp 00:06: [irq 1]
[ 0.440753] pnp 00:06: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.440772] pnp 00:07: [irq 12]
[ 0.440819] pnp 00:07: Plug and Play ACPI device, IDs DLL0418 PNP0f13 (active)
[ 0.441027] pnp 00:08: [mem 0xfed1c000-0xfed1ffff]
[ 0.441031] pnp 00:08: [mem 0xfed10000-0xfed13fff]
[ 0.441034] pnp 00:08: [mem 0xfed18000-0xfed18fff]
[ 0.441038] pnp 00:08: [mem 0xfed19000-0xfed19fff]
[ 0.441041] pnp 00:08: [mem 0xe0000000-0xefffffff]
[ 0.441045] pnp 00:08: [mem 0xfed20000-0xfed3ffff]
[ 0.441048] pnp 00:08: [mem 0xfed45000-0xfed8ffff]
[ 0.441146] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.441151] system 00:08: [mem 0xfed10000-0xfed13fff] has been reserved
[ 0.441155] system 00:08: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.441159] system 00:08: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.441164] system 00:08: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.441168] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.441172] system 00:08: [mem 0xfed45000-0xfed8ffff] has been reserved
[ 0.441178] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.441356] pnp: PnP ACPI: found 9 devices
[ 0.441359] ACPI: ACPI bus type pnp unregistered
[ 0.449759] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
[ 0.449766] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
[ 0.449771] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
[ 0.449786] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 08] add_size 1000
[ 0.449791] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 08] add_size 200000
[ 0.449807] pci 0000:00:1c.5: bridge window [mem 0x00100000-0x001fffff] to [bus 20] add_size 400000
[ 0.449828] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
[ 0.449833] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449837] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
[ 0.449841] pci 0000:00:1c.5: res[14]=[mem 0x00100000-0x001fffff] get_res_add_size add_size 400000
[ 0.449845] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449849] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
[ 0.449858] pci 0000:00:1c.0: BAR 14: assigned [mem 0xc0000000-0xc01fffff]
[ 0.449864] pci 0000:00:1c.0: BAR 15: assigned [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449869] pci 0000:00:1c.1: BAR 15: assigned [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449874] pci 0000:00:1c.5: BAR 14: assigned [mem 0xc0600000-0xc0afffff]
[ 0.449880] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
[ 0.449885] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
[ 0.449890] pci 0000:00:1f.3: BAR 0: assigned [mem 0xc0b00000-0xc0b000ff 64bit]
[ 0.449908] pci 0000:00:1c.0: PCI bridge to [bus 02]
[ 0.449913] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
[ 0.449922] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc01fffff]
[ 0.449929] pci 0000:00:1c.0: bridge window [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.449939] pci 0000:00:1c.1: PCI bridge to [bus 08]
[ 0.449944] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
[ 0.449953] pci 0000:00:1c.1: bridge window [mem 0xf0500000-0xf05fffff]
[ 0.449960] pci 0000:00:1c.1: bridge window [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.449971] pci 0000:20:00.0: BAR 6: assigned [mem 0xf0920000-0xf093ffff pref]
[ 0.449975] pci 0000:00:1c.5: PCI bridge to [bus 20]
[ 0.449980] pci 0000:00:1c.5: bridge window [io 0x2000-0x2fff]
[ 0.449989] pci 0000:00:1c.5: bridge window [mem 0xc0600000-0xc0afffff]
[ 0.449996] pci 0000:00:1c.5: bridge window [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450021] pci 0000:00:1e.0: PCI bridge to [bus 26]
[ 0.450083] pci 0000:00:1e.0: setting latency timer to 64
[ 0.450089] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.450093] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.450097] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450101] pci_bus 0000:00: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450105] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450108] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450112] pci_bus 0000:02: resource 0 [io 0x3000-0x3fff]
[ 0.450116] pci_bus 0000:02: resource 1 [mem 0xc0000000-0xc01fffff]
[ 0.450120] pci_bus 0000:02: resource 2 [mem 0xc0200000-0xc03fffff 64bit pref]
[ 0.450124] pci_bus 0000:08: resource 0 [io 0x4000-0x4fff]
[ 0.450127] pci_bus 0000:08: resource 1 [mem 0xf0500000-0xf05fffff]
[ 0.450131] pci_bus 0000:08: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref]
[ 0.450135] pci_bus 0000:20: resource 0 [io 0x2000-0x2fff]
[ 0.450139] pci_bus 0000:20: resource 1 [mem 0xc0600000-0xc0afffff]
[ 0.450142] pci_bus 0000:20: resource 2 [mem 0xf0900000-0xf09fffff 64bit pref]
[ 0.450146] pci_bus 0000:26: resource 4 [io 0x0000-0x0cf7]
[ 0.450150] pci_bus 0000:26: resource 5 [io 0x0d00-0xffff]
[ 0.450154] pci_bus 0000:26: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.450157] pci_bus 0000:26: resource 7 [mem 0x000d4000-0x000d7fff]
[ 0.450161] pci_bus 0000:26: resource 8 [mem 0xc0000000-0xdfffffff]
[ 0.450165] pci_bus 0000:26: resource 9 [mem 0xf0000000-0xfebfffff]
[ 0.450219] NET: Registered protocol family 2
[ 0.451401] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.456144] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.456812] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.456888] TCP: reno registered
[ 0.456903] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.456958] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.457123] NET: Registered protocol family 1
[ 0.457150] pci 0000:00:02.0: Boot video device
[ 0.457669] PCI: CLS 64 bytes, default 64
[ 0.457746] Unpacking initramfs...
[ 0.626300] Freeing initrd memory: 4636k freed
[ 0.628543] Simple Boot Flag at 0x3e set to 0x1
[ 0.629045] audit: initializing netlink socket (disabled)
[ 0.629069] type=2000 audit(1354288244.626:1): initialized
[ 0.648430] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.651510] VFS: Disk quotas dquot_6.5.2
[ 0.651590] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.651831] msgmni has been set to 5759
[ 0.652156] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.652204] io scheduler noop registered
[ 0.652208] io scheduler deadline registered
[ 0.652301] io scheduler cfq registered (default)
[ 0.652518] pcieport 0000:00:1c.0: irq 40 for MSI/MSI-X
[ 0.652689] pcieport 0000:00:1c.1: irq 41 for MSI/MSI-X
[ 0.652857] pcieport 0000:00:1c.5: irq 42 for MSI/MSI-X
[ 0.653107] intel_idle: does not run on family 6 model 23
[ 0.653156] GHES: HEST is not enabled!
[ 0.653245] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.653953] Linux agpgart interface v0.103
[ 0.654073] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.669080] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.669133] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.669294] mousedev: PS/2 mouse device common for all mice
[ 0.670409] rtc_cmos 00:05: RTC can wake from S4
[ 0.670599] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.670636] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.670648] cpuidle: using governor ladder
[ 0.670651] cpuidle: using governor menu
[ 0.670829] drop_monitor: Initializing network drop monitor service
[ 0.670946] TCP: cubic registered
[ 0.671122] NET: Registered protocol family 10
[ 0.671359] NET: Registered protocol family 17
[ 0.671373] Key type dns_resolver registered
[ 0.671720] PM: Hibernation image not present or could not be loaded.
[ 0.671743] registered taskstats version 1
[ 0.672782] rtc_cmos 00:05: setting system clock to 2012-11-30 15:10:45 UTC (1354288245)
[ 0.674872] Freeing unused kernel memory: 772k freed
[ 0.675168] Write protecting the kernel read-only data: 8192k
[ 0.682434] Freeing unused kernel memory: 1408k freed
[ 0.683107] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.685881] Freeing unused kernel memory: 568k freed
[ 0.698116] systemd-udevd[43]: starting version 195
[ 0.701918] SCSI subsystem initialized
[ 0.703991] ACPI: bus type scsi registered
[ 0.704082] libata version 3.00 loaded.
[ 0.705773] ahci 0000:00:1f.2: version 3.0
[ 0.705858] ahci 0000:00:1f.2: irq 43 for MSI/MSI-X
[ 0.705949] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 4 ports 3 Gbps 0x3 impl SATA mode
[ 0.705955] ahci 0000:00:1f.2: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part ccc sxs
[ 0.705962] ahci 0000:00:1f.2: setting latency timer to 64
[ 0.708617] scsi0 : ahci
[ 0.709413] scsi1 : ahci
[ 0.709823] scsi2 : ahci
[ 0.710229] scsi3 : ahci
[ 0.710359] ata1: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804100 irq 43
[ 0.710365] ata2: SATA max UDMA/133 abar m2048@0xf0804000 port 0xf0804180 irq 43
[ 0.710367] ata3: DUMMY
[ 0.710370] ata4: DUMMY
[ 1.196712] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.196745] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.198401] ata1.00: ATA-8: WDC WD3200BEKT-75F3T0, 11.01A11, max UDMA/133
[ 1.198405] ata1.00: 625142448 sectors, multi 0: LBA48 NCQ (depth 31/32), AA
[ 1.200123] ata1.00: configured for UDMA/133
[ 1.200301] scsi 0:0:0:0: Direct-Access ATA WDC WD3200BEKT-7 11.0 PQ: 0 ANSI: 5
[ 1.201956] sd 0:0:0:0: [sda] 625142448 512-byte logical blocks: (320 GB/298 GiB)
[ 1.202042] sd 0:0:0:0: [sda] Write Protect is off
[ 1.202047] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.202083] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.213584] ata2.00: ATAPI: TSSTcorp DVD+/-RW TS-U633F, D500, max UDMA/100
[ 1.213590] ata2.00: applying bridge limits
[ 1.229911] ata2.00: configured for UDMA/100
[ 1.232328] scsi 1:0:0:0: CD-ROM TSSTcorp DVD+-RW TS-U633F D500 PQ: 0 ANSI: 5
[ 1.270602] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 sda8 >
[ 1.271452] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.273864] ACPI: bus type usb registered
[ 1.273912] usbcore: registered new interface driver usbfs
[ 1.273946] usbcore: registered new interface driver hub
[ 1.273996] usbcore: registered new device driver usb
[ 1.274813] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.274869] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 1.274876] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 1.274891] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 1.278814] ehci_hcd 0000:00:1a.7: debug port 1
[ 1.278826] ehci_hcd 0000:00:1a.7: cache line size of 64 is not supported
[ 1.278852] ehci_hcd 0000:00:1a.7: irq 19, io mem 0xf0804800
[ 1.279113] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.279117] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.280054] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.286696] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 1.286950] hub 1-0:1.0: USB hub found
[ 1.286958] hub 1-0:1.0: 6 ports detected
[ 1.287158] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 1.287164] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 1.287174] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 1.291082] ehci_hcd 0000:00:1d.7: debug port 1
[ 1.291093] ehci_hcd 0000:00:1d.7: cache line size of 64 is not supported
[ 1.291118] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0804c00
[ 1.300028] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 1.300266] hub 2-0:1.0: USB hub found
[ 1.300273] hub 2-0:1.0: 6 ports detected
[ 1.301086] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.301130] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.301135] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 1.301145] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 1.301191] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00001820
[ 1.301506] hub 3-0:1.0: USB hub found
[ 1.301513] hub 3-0:1.0: 2 ports detected
[ 1.301640] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 1.301645] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 1.301654] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 1.301701] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00001840
[ 1.301997] hub 4-0:1.0: USB hub found
[ 1.302004] hub 4-0:1.0: 2 ports detected
[ 1.302158] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 1.302164] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 1.302198] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 1.302230] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00001860
[ 1.302434] hub 5-0:1.0: USB hub found
[ 1.302441] hub 5-0:1.0: 2 ports detected
[ 1.302557] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.302562] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 1.302572] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 1.302603] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001880
[ 1.302824] hub 6-0:1.0: USB hub found
[ 1.302833] hub 6-0:1.0: 2 ports detected
[ 1.303165] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 1.303171] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 1.303186] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 1.303219] uhci_hcd 0000:00:1d.1: irq 19, io base 0x000018a0
[ 1.303759] hub 7-0:1.0: USB hub found
[ 1.303766] hub 7-0:1.0: 2 ports detected
[ 1.303897] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 1.303903] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 1.303995] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 1.304040] uhci_hcd 0000:00:1d.2: irq 18, io base 0x000018c0
[ 1.304881] hub 8-0:1.0: USB hub found
[ 1.304888] hub 8-0:1.0: 2 ports detected
[ 1.323613] SGI XFS with ACLs, security attributes, realtime, large block/inode numbers, no debug enabled
[ 1.330105] [drm] Initialized drm 1.1.0 20060810
[ 1.331660] agpgart-intel 0000:00:00.0: Intel GM45 Chipset
[ 1.331843] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.333755] agpgart-intel 0000:00:00.0: detected 131072K stolen memory
[ 1.333940] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 1.334797] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input1
[ 1.334889] ACPI: Lid Switch [LID0]
[ 1.335079] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input2
[ 1.335086] ACPI: Power Button [PWRB]
[ 1.335191] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 1.335196] ACPI: Power Button [PWRF]
[ 1.341526] i915 0000:00:02.0: setting latency timer to 64
[ 1.414990] i915 0000:00:02.0: irq 44 for MSI/MSI-X
[ 1.415006] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 1.415008] [drm] Driver supports precise vblank timestamp query.
[ 1.415071] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 1.606699] usb 2-4: new high-speed USB device number 2 using ehci_hcd
[ 1.630029] tsc: Refined TSC clocksource calibration: 1296.749 MHz
[ 1.630036] Switching to clocksource tsc
[ 2.030864] fbcon: inteldrmfb (fb0) is primary device
[ 2.090024] usb 2-5: new high-speed USB device number 3 using ehci_hcd
[ 2.574662] Console: switching to colour frame buffer device 170x48
[ 2.579271] fb0: inteldrmfb frame buffer device
[ 2.579273] drm: registered panic notifier
[ 2.680113] acpi device:07: registered as cooling_device0
[ 2.780104] acpi device:08: registered as cooling_device1
[ 2.780177] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.780313] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input4
[ 2.780358] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.963907] device-mapper: uevent: version 1.0.3
[ 2.964084] device-mapper: ioctl: 4.23.0-ioctl (2012-07-25) initialised: [email protected]
[ 3.763615] atkbd serio0: Unknown key pressed (translated set 2, code 0x8e on isa0060/serio0).
[ 3.763622] atkbd serio0: Use 'setkeycodes e00e <keycode>' to make it known.
[ 9.679599] XFS (dm-0): Mounting Filesystem
[ 9.807350] XFS (dm-0): Ending clean mount
[ 10.447920] systemd[1]: RTC configured in localtime, applying delta of 60 minutes to system time.
[ 10.481565] systemd[1]: systemd 196 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ; arch)
[ 10.507375] systemd[1]: Set hostname to <xxx-laptop>.
[ 11.844864] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory. See system logs and 'systemctl status display-manager.service' for details.
[ 11.845276] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 11.845371] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 11.845393] systemd[1]: Starting Login Prompts.
[ 11.845414] systemd[1]: Reached target Login Prompts.
[ 11.845429] systemd[1]: Starting Arch Daemons.
[ 11.845447] systemd[1]: Reached target Arch Daemons.
[ 11.845462] systemd[1]: Starting Remote File Systems.
[ 11.845481] systemd[1]: Reached target Remote File Systems.
[ 11.845496] systemd[1]: Starting Syslog Socket.
[ 11.845558] systemd[1]: Listening on Syslog Socket.
[ 11.845576] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 11.845615] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 11.845630] systemd[1]: Starting Delayed Shutdown Socket.
[ 11.845668] systemd[1]: Listening on Delayed Shutdown Socket.
[ 11.845766] systemd[1]: Starting udev Kernel Socket.
[ 11.845804] systemd[1]: Listening on udev Kernel Socket.
[ 11.845885] systemd[1]: Starting udev Control Socket.
[ 11.845927] systemd[1]: Listening on udev Control Socket.
[ 11.845979] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
[ 11.846139] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
[ 11.846157] systemd[1]: Expecting device dev-mapper-home.device...
[ 11.846175] systemd[1]: Expecting device dev-sda8.device...
[ 11.846193] systemd[1]: Expecting device dev-mapper-swap.device...
[ 11.846210] systemd[1]: Expecting device dev-sda6.device...
[ 11.846232] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 11.846291] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 11.846308] systemd[1]: Expecting device dev-disk-by\x2duuid-f19efb1f\x2d9a5b\x2d4f22\x2db35d\x2d4a603145a436.device...
[ 11.846328] systemd[1]: Expecting device dev-disk-by\x2duuid-bd984744\x2d036e\x2d47e5\x2db40f\x2d04fa9f6d0f35.device...
[ 11.846347] systemd[1]: Expecting device dev-disk-by\x2duuid-f1bab4e5\x2de736\x2d443a\x2d827e\x2d59f202a548ab.device...
[ 11.846368] systemd[1]: Starting Journal Socket.
[ 11.846439] systemd[1]: Listening on Journal Socket.
[ 11.846467] systemd[1]: Started File System Check on Root Device.
[ 11.846485] systemd[1]: Starting Remount Root and Kernel File Systems...
[ 11.850382] systemd[1]: Mounting Temporary Directory...
[ 11.998839] systemd[1]: tmp.mount: Directory /tmp to mount over is not empty, mounting anyway. (To see the over-mounted files, please manually mount the underlying file system to a secondary location.)
[ 12.026864] systemd[1]: Mounting Huge Pages File System...
[ 12.040270] systemd[1]: Mounting POSIX Message Queue File System...
[ 12.043518] systemd[1]: Starting udev Coldplug all Devices...
[ 12.156149] systemd[1]: Starting Load Kernel Modules...
[ 12.173525] systemd[1]: Mounting Debug File System...
[ 12.186770] systemd[1]: Starting Setup Virtual Console...
[ 12.484840] systemd[1]: Starting Apply Kernel Variables...
[ 12.616915] systemd[1]: Starting Set Up Additional Binary Formats...
[ 12.630266] systemd[1]: Starting udev Kernel Device Manager...
[ 12.636850] systemd[1]: Starting Journal Service...
[ 12.646587] systemd[1]: Started Journal Service.
[ 12.646650] systemd[1]: Starting Syslog.
[ 12.646684] systemd[1]: Reached target Syslog.
[ 12.647637] systemd[1]: Started Remount Root and Kernel File Systems.
[ 12.647816] systemd[1]: Mounted Temporary Directory.
[ 12.647972] systemd[1]: Mounted Huge Pages File System.
[ 12.648127] systemd[1]: Mounted POSIX Message Queue File System.
[ 12.653654] systemd[1]: Mounted Debug File System.
[ 12.653705] systemd[1]: Starting Local File Systems (Pre).
[ 12.653726] systemd[1]: Reached target Local File Systems (Pre).
[ 12.653749] systemd[1]: Starting Load Random Seed...
[ 12.705203] FS-Cache: Loaded
[ 12.740616] RPC: Registered named UNIX socket transport module.
[ 12.740621] RPC: Registered udp transport module.
[ 12.740624] RPC: Registered tcp transport module.
[ 12.740626] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 12.881473] systemd-udevd[162]: starting version 196
[ 12.988696] FS-Cache: Netfs 'nfs' registered for caching
[ 13.298794] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 13.299212] r8169 0000:20:00.0: irq 45 for MSI/MSI-X
[ 13.299501] r8169 0000:20:00.0: eth0: RTL8168d/8111d at 0xffffc9000060e000, 00:26:b9:ca:52:29, XID 081000c0 IRQ 45
[ 13.299506] r8169 0000:20:00.0: eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
[ 13.401185] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 13.802403] snd_hda_intel 0000:00:1b.0: irq 46 for MSI/MSI-X
[ 14.148667] input: HDA Intel HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
[ 14.148733] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
[ 14.208405] cfg80211: Calling CRDA to update world regulatory domain
[ 14.318480] microcode: CPU0 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.330974] lib80211: common routines for IEEE802.11 drivers
[ 14.330979] lib80211_crypt: registered algorithm 'NULL'
[ 14.375031] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 14.649332] microcode: CPU0 updated to revision 0xa0b, date = 2010-09-28
[ 14.656959] microcode: CPU1 sig=0x1067a, pf=0x80, revision=0xa07
[ 14.660799] microcode: CPU1 updated to revision 0xa0b, date = 2010-09-28
[ 14.668564] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 14.709327] ACPI: Requesting acpi_cpufreq
[ 14.714946] Monitor-Mwait will be used to enter C-1 state
[ 14.714973] Monitor-Mwait will be used to enter C-2 state
[ 14.714989] Monitor-Mwait will be used to enter C-3 state
[ 14.715001] tsc: Marking TSC unstable due to TSC halts in idle
[ 14.715031] ACPI: acpi_idle registered with cpuidle
[ 14.720557] Switching to clocksource hpet
[ 14.757813] wmi: Mapper loaded
[ 15.215288] ACPI Warning: 0x0000000000000428-0x000000000000042f SystemIO conflicts with Region \PMIO 1 (20120711/utaddress-251)
[ 15.215300] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215306] ACPI Warning: 0x0000000000001180-0x00000000000011bf SystemIO conflicts with Region \GPIO 1 (20120711/utaddress-251)
[ 15.215313] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 15.215315] lpc_ich: Resource conflict(s) found affecting gpio_ich
[ 15.303785] ACPI: Battery Slot [BAT1] (battery present)
[ 15.405750] input: Dell WMI hotkeys as /devices/virtual/input/input8
[ 15.417769] iTCO_vendor_support: vendor-support=0
[ 15.430131] ACPI: AC Adapter [ACAD] (off-line)
[ 15.471845] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 15.471895] iTCO_wdt: Found a ICH9M-E TCO device (Version=2, TCOBASE=0x0460)
[ 15.472076] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 15.585541] wl: module license 'Mixed/Proprietary' taints kernel.
[ 15.585549] Disabling lock debugging due to kernel taint
[ 15.625424] psmouse serio1: synaptics: Touchpad model: 1, fw: 7.0, id: 0x1a0b1, caps: 0xd04711/0xa00000/0x20000, board id: 3655, fw id: 528343
[ 15.629342] INFO @wl_cfg80211_attach : Registered CFG80211 phy
[ 15.654093] lib80211_crypt: registered algorithm 'TKIP'
[ 15.654584] eth1: Broadcom BCM4315 802.11 Hybrid Wireless Controller 5.100.82.112
[ 15.693893] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input9
[ 15.816131] ACPI Warning: 0x0000000000001c00-0x0000000000001c1f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120711/utaddress-251)
[ 15.816143] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 16.108446] Linux media interface: v0.10
[ 16.120558] Linux video capture interface: v2.00
[ 16.169228] usbcore: registered new interface driver uas
[ 16.281166] uvcvideo: Found UVC 1.00 device Laptop_Integrated_Webcam_1.3M (0c45:6415)
[ 16.316308] Initializing USB Mass Storage driver...
[ 16.316609] usbcore: registered new interface driver usb-storage
[ 16.316613] USB Mass Storage support registered.
[ 16.328744] input: Laptop_Integrated_Webcam_1.3M as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/2-5:1.0/input/input10
[ 16.328873] usbcore: registered new interface driver uvcvideo
[ 16.328876] USB Video Class driver (1.1.1)
[ 16.779720] usb 2-4: USB disconnect, device number 2
[ 16.783629] scsi4 : usb-storage 2-4:1.0
[ 16.783773] usbcore: registered new interface driver ums-realtek
[ 17.381988] EXT4-fs (sda5): mounting ext3 file system using the ext4 subsystem
[ 17.393596] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[ 21.567415] Adding 977880k swap on /dev/mapper/swap. Priority:-1 extents:1 across:977880k
[ 21.656824] XFS (dm-1): Mounting Filesystem
[ 21.839619] XFS (dm-1): Ending clean mount
[ 21.940898] systemd-journald[163]: Received SIGUSR1
[ 28.055735] r8169 0000:20:00.0: eth0: link down
[ 28.055792] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 28.875645] Bluetooth: Core ver 2.16
[ 28.875677] NET: Registered protocol family 31
[ 28.875680] Bluetooth: HCI device and connection manager initialized
[ 28.875684] Bluetooth: HCI socket layer initialized
[ 28.875687] Bluetooth: L2CAP socket layer initialized
[ 28.875695] Bluetooth: SCO socket layer initialized
[ 29.041069] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 37.807702] fuse init (API version 7.20)
[ 37.828734] EXT4-fs (sda5): re-mounted. Opts: commit=600
lsmod
Module Size Used by
fuse 69173 2
michael_mic 2074 8
arc4 2039 4
ecb 2105 0
bnep 8857 2
bluetooth 192120 7 bnep
snd_seq 50881 1
snd_seq_device 5268 1 snd_seq
ums_realtek 7391 0
usb_storage 47384 1 ums_realtek
uvcvideo 72787 0
videobuf2_vmalloc 2468 1 uvcvideo
uas 11119 0
videobuf2_memops 2246 1 videobuf2_vmalloc
videobuf2_core 24030 1 uvcvideo
videodev 100859 2 uvcvideo,videobuf2_core
media 10405 2 uvcvideo,videodev
i2c_i801 9571 0
joydev 9991 0
coretemp 6070 0
kvm_intel 124749 0
lib80211_crypt_tkip 7738 0
wl 2558087 0
kvm 373917 1 kvm_intel
iTCO_wdt 5255 0
iTCO_vendor_support 1929 1 iTCO_wdt
dell_wmi 1485 0
acpi_cpufreq 5933 1
lpc_ich 10609 0
ac 2536 0
mperf 1267 1 acpi_cpufreq
sparse_keymap 3056 1 dell_wmi
battery 6773 0
wmi 8379 1 dell_wmi
dell_laptop 8787 0
processor 26855 3 acpi_cpufreq
evdev 10266 12
psmouse 71909 0
serio_raw 4689 0
dcdbas 5520 1 dell_laptop
lib80211 3949 2 wl,lib80211_crypt_tkip
microcode 12377 0
cfg80211 177108 1 wl
rfkill 15604 5 cfg80211,bluetooth
snd_hda_codec_hdmi 24487 1
snd_hda_codec_realtek 61193 1
snd_hda_intel 26180 3
snd_hda_codec 98033 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6428 1 snd_hda_codec
snd_pcm_oss 38992 0
snd_pcm 75689 5 snd_pcm_oss,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
snd_timer 18934 3 snd_pcm,snd_seq
snd_mixer_oss 15347 1 snd_pcm_oss
snd 60188 16 snd_hda_codec_realtek,snd_pcm_oss,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_seq,snd_hda_codec,snd_hda_intel,snd_seq_device,snd_mixer_oss
soundcore 5442 1 snd
pcspkr 1899 0
r8169 56839 0
mii 4091 1 r8169
nfs 127007 0
lockd 64904 1 nfs
sunrpc 186092 2 nfs,lockd
fscache 40995 1 nfs
ablk_helper 1972 0
cryptd 8741 1 ablk_helper
aes_x86_64 7508 6
aes_generic 26138 1 aes_x86_64
xts 3101 3
gf128mul 6050 1 xts
dm_crypt 15799 3
dm_mod 72105 7 dm_crypt
i915 495521 3
video 11276 1 i915
button 4662 1 i915
i2c_algo_bit 5391 1 i915
intel_agp 10744 1 i915
intel_gtt 15659 3 i915,intel_agp
drm_kms_helper 32877 1 i915
drm 218852 4 i915,drm_kms_helper
i2c_core 20707 6 drm,i915,i2c_i801,drm_kms_helper,i2c_algo_bit,videodev
vfat 10119 0
fat 48338 1 vfat
xfs 748207 2
ext4 440434 1
crc16 1359 2 ext4,bluetooth
jbd2 78751 1 ext4
mbcache 5977 1 ext4
uhci_hcd 23436 0
ehci_hcd 41816 0
sr_mod 14823 0
usbcore 150398 6 uas,uhci_hcd,uvcvideo,ums_realtek,usb_storage,ehci_hcd
usb_common 954 1 usbcore
cdrom 35520 1 sr_mod
sd_mod 29559 5
ahci 21360 4
libahci 20023 1 ahci
libata 167683 2 ahci,libahci
scsi_mod 133386 5 uas,usb_storage,libata,sd_mod,sr_mod
lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
00:1a.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
00:1a.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #6 (rev 03)
00:1a.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #2 (rev 03)
00:1b.0 Audio device: Intel Corporation 82801I (ICH9 Family) HD Audio Controller (rev 03)
00:1c.0 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 1 (rev 03)
00:1c.1 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 2 (rev 03)
00:1c.5 PCI bridge: Intel Corporation 82801I (ICH9 Family) PCI Express Port 6 (rev 03)
00:1d.0 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #1 (rev 03)
00:1d.1 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #2 (rev 03)
00:1d.2 USB controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #3 (rev 03)
00:1d.7 USB controller: Intel Corporation 82801I (ICH9 Family) USB2 EHCI Controller #1 (rev 03)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev 93)
00:1f.0 ISA bridge: Intel Corporation ICH9M-E LPC Interface Controller (rev 03)
00:1f.2 SATA controller: Intel Corporation 82801IBM/IEM (ICH9M/ICH9M-E) 4 port SATA Controller [AHCI mode] (rev 03)
00:1f.3 SMBus: Intel Corporation 82801I (ICH9 Family) SMBus Controller (rev 03)
08:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01)
20:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 03)
pacman -Q | grep ...
alsa-lib 1.0.26-1
alsa-plugins 1.0.26-1
alsa-utils 1.0.26-1
alsaplayer 0.99.81-5
lib32-alsa-lib 1.0.26-1
lib32-alsa-plugins 1.0.26-1
lib32-libpulse 2.1-1
lib32-libsndfile 1.0.25-2
libcanberra-pulse 0.30-2
libcdaudio 0.99.12-6
libpulse 2.1-1
libsndfile 1.0.25-2
portaudio 19_20111121-1
pulseaudio 2.1-1
pulseaudio-alsa 2-1
sound-juicer 3.5.0-1
sound-theme-freedesktop 0.8-1
soundtouch 1.6.0-1
teamspeak-soundpack-portal 1-4
webrtc-audio-processing 0.1-1
pactl list
Module #0
Name: module-device-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute state of devices"
module.version = "2.1"
Module #1
Name: module-stream-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore the volume/mute/device state of streams"
module.version = "2.1"
Module #2
Name: module-card-restore
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Automatically restore profile of cards"
module.version = "2.1"
Module #3
Name: module-augment-properties
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Augment the property sets of streams with additional static information"
module.version = "2.1"
Module #4
Name: module-udev-detect
Argument:
Usage counter: n/a
Properties:
module.author = "Lennart Poettering"
module.description = "Detect available audio hardware and load matching drivers"
module.version = "2.1"
Module #5
Name: module-jackdbus-detect
Argument:
Usage counter: n/a
Properties:
module.author = "David Henningsson"
module.descriptI set the loglevel to debug and rebooted.
grep -i pulse /var/log/everything.log
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:34 localhost rtkit-daemon[442]: Successfully made thread 713 of process 713 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-device-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes.tdb'
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-stream-volumes'.
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
Dec 3 01:06:34 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] database-tdb.c: Opened TDB database '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database.tdb'
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/whatever/.pulse/883cea362d03be37758a39f4000006db-card-database'.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-udev-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-udev-detect.c: Found 1 cards.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #4; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-jackdbus-detect.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus f8aad50a9c72259e812fef8050bbed02 as :1.11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #5; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-bluetooth-discover.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus aca7467032ad6386c1a812c250bbecf9 as :1.27
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] bluetooth-util.c: dbus: interface=org.freedesktop.DBus, path=/org/freedesktop/DBus, member=NameAcquired
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #6; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-esound-protocol-unix.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #8; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-gconf.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-gconf" (index: #9; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #10; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #11; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.description = "Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.class = "abstract"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] sink.c: device.icon_name = "audio-card"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.class = "monitor"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
Dec 3 01:06:35 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Thread starting up
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-null-sink" (index: #12; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-always-sink" (index: #13; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #14; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #15; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-console-kit.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-console-kit" (index: #16; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-systemd-login.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 0 "Login Session 1"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-systemd-login.c: Added new session 1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #17; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #18; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-role-cork" (index: #19; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #20; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #21; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] cli-command.c: Checking for existence of '/usr/lib/pulse-2.1/modules/module-dbus-protocol.so': success
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Memstats added for object /org/pulseaudio/core1/memstats
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Sink added for object /org/pulseaudio/core1/sink0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Device added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Source added for object /org/pulseaudio/core1/source0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module2
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module3
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module4
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module5
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module6
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module7
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module8
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module9
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module10
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module11
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module12
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module13
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module14
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module15
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module16
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module17
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module18
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module19
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module20
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module21
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client0
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1 added for object /org/pulseaudio/core1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-dbus-protocol" (index: #22; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #23; argument: "").
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.PulseAudio1!
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Got org.pulseaudio.Server!
Dec 3 01:06:35 localhost pulseaudio[710]: [pulseaudio] main.c: Daemon startup successful.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] main.c: Daemon startup complete.
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module22
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module23
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] client.c: Created 1 "Native client (UNIX socket client)"
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:35 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-settings-daemon
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 2 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client2
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Found /usr/share/applications/gnome-shell.desktop.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Created 3 "Native client (UNIX socket client)"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client3
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for canberra-gtk-play
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 3 "canberra-gtk-play"
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:37 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client3
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
Dec 3 00:06:38 localhost rtkit-daemon[442]: Successfully made thread 745 of process 745 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: RealtimeKit worked.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] core-util.c: Successfully gained nice level -11.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: This is PulseAudio 2.1
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -D_FORTIFY_SOURCE=2 -Wall -W -Wextra -Wno-long-long -Wvla -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -Wp,-D_FORTIFY_SOURCE=2 -fno-common -fdiagnostics-show-option
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running on host: Linux x86_64 3.6.8-1-ARCH #1 SMP PREEMPT Mon Nov 26 22:10:40 CET 2012
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Found 2 CPUs.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Page size is 4096 bytes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Compiled with Valgrind support: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in valgrind mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in VM: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Optimized build: yes
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Machine ID is 883cea362d03be37758a39f4000006db.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using runtime directory /home/whatever/.pulse/883cea362d03be37758a39f4000006db-runtime.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using state directory /home/whatever/.pulse.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-2.1/modules.
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] main.c: Running in system mode: no
Dec 3 01:06:38 localhost pulseaudio[745]: [pulseaudio] pid.c: Daemon already running.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 4 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-publish" (index: #24; argument: "display=:0").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module24
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 4 "pactl"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client4
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 5 "Native client (UNIX socket client)"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client5
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for pactl
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module-x11-xsmp.c: Connected to session manager 'gnome-session' as '102459fa9aeb823737135449319899169800000005480030'.
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] client.c: Created 6 "XSMP Session on gnome-session as 102459fa9aeb823737135449319899169800000005480030"
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] module.c: Loaded "module-x11-xsmp" (index: #25; argument: "display=:0 session_manager=local/whatever-laptop:@/tmp/.ICE-unix/548,unix/whatever-laptop:/tmp/.ICE-unix/548").
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client6
Dec 3 01:06:38 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Module added for object /org/pulseaudio/core1/module25
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] client.c: Freed 5 "pactl"
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Connection died.
Dec 3 01:06:39 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client removed from object /org/pulseaudio/core1/client5
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:06:40 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] client.c: Created 7 "Native client (UNIX socket client)"
Dec 3 01:06:52 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Client added for object /org/pulseaudio/core1/client7
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Protocol version: remote 26, local 26
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Got credentials: uid=1000 gid=100 success=1
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: SHM possible: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Negotiated SHM: yes
Dec 3 01:06:54 localhost pulseaudio[713]: [pulseaudio] module-augment-properties.c: Looking for .desktop file for gnome-shell
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0000, resuming
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 0 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Client gnome-shell changes volume of sink auto_null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Storing volume/mute for device+port sink:auto_null:null.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 54188 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 0 "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-stream-restore.c: Restoring device for stream sink-input-by-media-role:event.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-intended-roles.c: Not setting device for stream audio-volume-change, because already set.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes busy.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=33554432, tlength=0, base=4, prebuf=0, minreq=1 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=33554432, tlength=33554432, base=4, prebuf=0, minreq=4 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Created input 1 "audio-volume-change" on auto_null with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: event.id = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.role = "event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.name = "audio-volume-change"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: media.filename = "/usr/share//sounds/freedesktop/stereo/audio-volume-change.oga"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.name = "GNOME Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.peer = "UNIX socket client"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: native-protocol.version = "26"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.id = "org.gnome.Shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.id = "717"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.user = "whatever"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.host = "whatever-laptop"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.binary = "gnome-shell"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.language = "en_US.utf8"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: window.x11.display = ":0"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: application.process.machine_id = "883cea362d03be37758a39f4000006db"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] sink-input.c: module-stream-restore.id = "sink-input-by-media-role:event"
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested tlength=2000.00 ms, minreq=20.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Traditional mode enabled, modifying sink usec only for compat with minreq.
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Requested latency=1960.00 ms, Received latency=1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq requested: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] memblockq.c: memblockq sanitized: maxlength=4194304, tlength=352800, base=4, prebuf=349276, minreq=3528 maxrewind=0
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-native.c: Final latency 3960.00 ms = 1960.00 ms + 2*20.00 ms + 1960.00 ms
Dec 3 01:08:18 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream added for object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Requesting rewind due to end of underrun.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] sink-input.c: Have to rewind 345744 bytes on render memblockq.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 345744 bytes.
Dec 3 01:08:18 localhost pulseaudio[713]: [null-sink] protocol-native.c: Underrun on 'audio-volume-change', 0 bytes in queue.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Requested to rewind 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] sink.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] source.c: Processing rewind...
Dec 3 01:08:21 localhost pulseaudio[713]: [null-sink] module-null-sink.c: Rewound 352800 bytes.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Core1.Stream removed from object /org/pulseaudio/core1/playback_stream1
Dec 3 01:08:21 localhost pulseaudio[713]: [pulseaudio] sink-input.c: Freeing input 1 "audio-volume-change"
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle for too long, suspending ...
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] sink.c: Suspend cause of sink auto_null is 0x0004, suspending
Dec 3 01:08:26 localhost pulseaudio[713]: [pulseaudio] core.c: Hmm, no streams around, trying to vacuum.
Dec 3 01:08:28 localhost pulseaudio[713]: [pulseaudio] module-device-restore.c: Synced.
By now I also made my system not load any moudules which have oss in their name. Didn't help either. -
[Solved] Multiple sounds at the same time
Hello!
I've just received my new Creative X-Fi Titanium since I was in need of an optical in socket and have spent a while trying to get it to work to my liking.
I read through the ALSA wiki, read countless posts on the forums such as this one http://bbs.archlinux.org/viewtopic.php?pid=702994, tried several .asoundrc files and of course read the related arch wiki pages without much success.
Everything is upmixed properly to 5.1 output but I still can't play two sounds at once - with one odd exception:
When I have mpd playing and start a youtube video, sound will play but it will only output through the 2 front speakers and I can pause and unpause mpd normally, sound will return.
When I pause mpd and play a youtube video, it gets upmixed properly but mpd returns "error: problems opening sound device".
Mplayer returns [AO_ALSA] alsa-lib: pcm_hw.c:1291:(snd_pcm_hw_open) open /dev/snd/pcmC0D0p failed: Invalid argument and [AO_ALSA] alsa-lib: pcm_dmix.c:1060:(snd_pcm_dmix_open) unable to open slave.
Heroes of Newerth returns the same: ALSA lib pcm_dmix.c:1060:(snd_pcm_dmix_open) unable to open slave.
fuser -v /dev/snd/*
/dev/snd/controlC0: eyescream 27612 F.... Steam.exe
/dev/snd/pcmC0D0p: eyescream 27612 F...m Steam.exe
fuser -v /dev/dsp*
zsh: no matches found: /dev/dsp*
cat .asoundrc
pcm.snd_card {
type hw
card 0 # change to your cards number or name
# 6 channel dmix:
pcm.dmix6 {
type dmix
ipc_key 1024
ipc_key_add_uid false
ipc_perm 0666
slave {
pcm "hw:0,0"
rate 48000
format "S32_LE"
channels 6
period_time 0
period_size 1024
buffer_time 0
buffer_size 8192
# upmixing:
pcm.ch51dup {
type route
slave.pcm dmix6
slave.channels 6
ttable.0.0 1
ttable.1.1 1
ttable.0.2 0.6
ttable.1.3 0.6
ttable.0.4 0.5
ttable.1.4 0.5
ttable.0.5 0.5
ttable.1.5 0.5
pcm.duplex {
type asym
playback.pcm "ch51dup" # upmix first
capture.pcm "hw:0"
# change default device:
pcm.!default {
type plug
slave {
pcm "duplex"
# for aoss
#pcm.dsp "duplex"
#pcm.dsp1 "duplex"
If anyone could hint me in the right direction as to how I could get it to work properly or provide me with a working .asoundrc, I'd appreciate it!
Last edited by eyescream (2010-02-25 19:30:30)eyescream wrote:I can have sound in mpd and mplayer at the same time now
Good. So file the damned bug report against mpd. Right now would be a good time.
eyescream wrote:but flash completely blocks sound off for other things.
See thread. Prove to me that flash/firefox is blocking:
fuser -v /dev/snd/* /dev/dsp*
eyescream wrote:The problem now is that mpd only outputs through my front speakers, so it isn't being upmixed anymore.
Forget about upmixing for the moment, until you've got the ALSA/OSS conflict solved.
Edit: Use e.g.:
audio_output {
type "alsa"
name "Sound Card"
options "dev=dmixer"
device "headphones"
In /etc/mpd.conf or ~/.mpdconf, where the device string matches an ALSA pcm entry.
eyescream wrote:What do you mean by not renaming "default" exactly?
This, of course, from your own ~/.asoundrc
# change default device:
pcm.!default {
type plug
slave {
pcm "duplex"
Comment that section out, for the time being.
Last edited by brebs (2010-02-25 02:43:54) -
Solved: No sound over HDMI - HP Pavilion dv3510nr Entertainment Notebook PC
I bought an HP Pavilion dv3510nr in April 2009 (4G Ram, Vista Home Premium 64Bit). As I did not have access to any HDMI devices I didn’t have the opportunity to use the HDMI output. Recently I obtained an HDMI TV and when I connected the dv3510nr the video worked fine, but there was no sound. Set the default playback device to Digital Output Device (S/PDIF/HDMI); this made no difference. Over many days I tried various suggestions regarding possible solutions, all without success.
Shortly after buying the laptop, I visited NVIDIA’s web sit and updated the original video drivers to the latest version (version 186.03). According to the NVIDIA, the 186.X drivers offer a very significant performance increase for many applications, and also include PhysX system software for hardware acceleration.
Checked HP’s support page for my model here, and found that the latest drivers provided by HP were version 7.15.11.7903, (Called NVIDIA NB9M-GS Graphics Drivers).
Decided to replace my current drivers with these older ones. This was harder than I expected. Downloading and running the exe file (sp41695.exe) did not replace the existing 186.03 drivers. Using the control panel to uninstall both the drivers and the PhysX software seemed to work, but on rebooting, the drivers were automatically re-installed. I also used Device Manager to uninstall them. Eventually I succeeded and again tried to install the older drivers provided by HP; this time I received an error message saying that I was “Trying to use a 32-bit uninstaller on a 64-bit system”. The program sp41695.exe initially creates a folder C:\SWSetup\SP41695 that contains several files including a setup.exe file and two other folders: WinVista32 and WinVista64. Each of these also contains setup.exe files. I ran the setup.exe file in the WinVista64 folder. This successfully installed both the video and sound drivers for my graphics card. HDMI sound has worked fine since then. Needless to say, from now on I will only install drivers etc. from HP website!
Hope this saves someone else some time.Here is a thread and it seems like one person got it to work by uninstalling and reinstalling but I didn't read it that carefully. There does seem to be a problem with getting a real windows 7 driver:
http://h30434.www3.hp.com/t5/Notebook-PC-Sound-and-Audio/Conexant-High-Definition-Audio-Driver-for-W...
Here is another thread (not HP) that said he forced the driver and got it to work:
http://www.sevenforums.com/sound-audio/10471-conexant-high-definition-audio-windows-7-rc-1-no-sound....
Reminder: Please select the "Accept as Solution" button on the post that best answers your question. Also, you may click on the white star in the "Kudos" button for any helpful post to give that person a quick thanks. These feedback tools help keep our community active, so you receive better answers faster. -
[Solved]No sound anymore (ALSA/PulseAudio)
Ok so I have no idea why I have no sound anymore, I didn't install anything...
Anyway, that's what I've tried:
-Check if mixer are all up in alsamixer
-Try to play a bit with pavucontrol
-Reboot
-Rerun pulseaudio with verbose
-Mute and unmute with physical button (I don't know why but I used to get this problem and it used to be solved just doing this)
-Googgling and searching this forum
Here are some more info
Pulseaudio logs:
└┼─$─┤▶ pulseaudio -k; pulseaudio -vvvvv
E: [pulseaudio] main.c: Failed to kill daemon: No such process
I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
D: [pulseaudio] core-util.c: RealtimeKit worked.
I: [pulseaudio] core-util.c: Successfully gained nice level -11.
I: [pulseaudio] main.c: This is PulseAudio 5.0
D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option
D: [pulseaudio] main.c: Running on host: Linux x86_64 3.14.1-1-ARCH #1 SMP PREEMPT Mon Apr 14 20:40:47 CEST 2014
D: [pulseaudio] main.c: Found 4 CPUs.
I: [pulseaudio] main.c: Page size is 4096 bytes
D: [pulseaudio] main.c: Compiled with Valgrind support: no
D: [pulseaudio] main.c: Running in valgrind mode: no
D: [pulseaudio] main.c: Running in VM: no
D: [pulseaudio] main.c: Optimized build: yes
D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
I: [pulseaudio] main.c: Machine ID is a3af3988434b49f3b8af2ab66eba685b.
I: [pulseaudio] main.c: Session ID is c1.
I: [pulseaudio] main.c: Using runtime directory /run/user/1001/pulse.
I: [pulseaudio] main.c: Using state directory /home/unkn0wn/.config/pulse.
I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-5.0/modules.
I: [pulseaudio] main.c: Running in system mode: no
I: [pulseaudio] main.c: Fresh high-resolution timers available! Bon appetit!
D: [pulseaudio] memblock.c: Using shared memory pool with 1024 slots of size 64.0 KiB each, total size is 64.0 MiB, maximum usable slot size is 65472
I: [pulseaudio] cpu-x86.c: CPU flags: CMOV MMX SSE SSE2 SSE3 SSSE3 SSE4_1 SSE4_2
I: [pulseaudio] svolume_mmx.c: Initialising MMX optimized volume functions.
I: [pulseaudio] remap_mmx.c: Initialising MMX optimized remappers.
I: [pulseaudio] svolume_sse.c: Initialising SSE2 optimized volume functions.
I: [pulseaudio] remap_sse.c: Initialising SSE2 optimized remappers.
I: [pulseaudio] sconv_sse.c: Initialising SSE2 optimized conversions.
I: [pulseaudio] svolume_orc.c: Initialising ORC optimized volume functions.
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes.tdb'
I: [pulseaudio] module-device-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-device-volumes'.
I: [pulseaudio] module.c: Loaded "module-device-restore" (index: #0; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes.tdb'
I: [pulseaudio] module-stream-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-stream-volumes'.
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1 added for object /org/pulseaudio/stream_restore1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry0
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry1
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry2
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry3
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry4
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry5
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry6
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry7
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry8
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry9
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry10
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry11
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry12
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry13
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry14
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry15
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry16
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry17
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry18
D: [pulseaudio] protocol-dbus.c: Interface org.PulseAudio.Ext.StreamRestore1.RestoreEntry added for object /org/pulseaudio/stream_restore1/entry19
I: [pulseaudio] module.c: Loaded "module-stream-restore" (index: #1; argument: "").
D: [pulseaudio] database-tdb.c: Opened TDB database '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database.tdb'
I: [pulseaudio] module-card-restore.c: Successfully opened database file '/home/unkn0wn/.config/pulse/a3af3988434b49f3b8af2ab66eba685b-card-database'.
I: [pulseaudio] module.c: Loaded "module-card-restore" (index: #2; argument: "").
I: [pulseaudio] module.c: Loaded "module-augment-properties" (index: #3; argument: "").
I: [pulseaudio] module.c: Loaded "module-switch-on-port-available" (index: #4; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-udev-detect.so': success
D: [pulseaudio] module-udev-detect.c: /dev/snd/controlC0 is accessible: yes
D: [pulseaudio] module-udev-detect.c: /devices/pci0000:00/0000:00:1b.0/sound/card0 is busy: yes
D: [pulseaudio] module-udev-detect.c: Ignoring /devices/platform/thinkpad_acpi/sound/card29, because marked so.
I: [pulseaudio] module-udev-detect.c: Found 1 cards.
I: [pulseaudio] module.c: Loaded "module-udev-detect" (index: #5; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-jackdbus-detect.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus session bus c9a6328a5bfaef44136d134253502922 as :1.32
D: [pulseaudio] module-jackdbus-detect.c: jackdbus isn't running.
I: [pulseaudio] module.c: Loaded "module-jackdbus-detect" (index: #6; argument: "channels=2").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-policy.so': success
I: [pulseaudio] module.c: Loaded "module-bluetooth-policy" (index: #7; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluetooth-discover.so': success
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez5-discover.so': success
D: [pulseaudio] dbus-util.c: Successfully connected to D-Bus system bus 54d6e91cb1d72b925a540cf453502907 as :1.40
I: [pulseaudio] module.c: Loaded "module-bluez5-discover" (index: #9; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-bluez4-discover.so': failure
I: [pulseaudio] module.c: Loaded "module-bluetooth-discover" (index: #8; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-esound-protocol-unix.so': success
I: [pulseaudio] module.c: Loaded "module-esound-protocol-unix" (index: #10; argument: "").
I: [pulseaudio] module.c: Loaded "module-native-protocol-unix" (index: #11; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-gconf.so': success
I: [pulseaudio] module.c: Loaded "module-gconf" (index: #12; argument: "").
I: [pulseaudio] module-default-device-restore.c: Saved default sink 'auto_null' not existent, not restoring default sink setting.
I: [pulseaudio] module-default-device-restore.c: Saved default source 'auto_null.monitor' not existent, not restoring default source setting.
I: [pulseaudio] module.c: Loaded "module-default-device-restore" (index: #13; argument: "").
I: [pulseaudio] module.c: Loaded "module-rescue-streams" (index: #14; argument: "").
D: [pulseaudio] module-always-sink.c: Autoloading null-sink as no other sinks detected.
I: [pulseaudio] module-device-restore.c: Restoring volume for sink auto_null: front-left: 99957 / 153%, front-right: 99957 / 153%
I: [pulseaudio] module-device-restore.c: Restoring mute state for sink auto_null.
I: [pulseaudio] sink.c: Created sink 0 "auto_null" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] sink.c: device.description = "Dummy Output"
I: [pulseaudio] sink.c: device.class = "abstract"
I: [pulseaudio] sink.c: device.icon_name = "audio-card"
D: [pulseaudio] core-subscribe.c: Dropped redundant event due to change event.
I: [pulseaudio] module-device-restore.c: Restoring mute state for source auto_null.monitor.
I: [pulseaudio] source.c: Created source 0 "auto_null.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right
I: [pulseaudio] source.c: device.description = "Monitor of Dummy Output"
I: [pulseaudio] source.c: device.class = "monitor"
I: [pulseaudio] source.c: device.icon_name = "audio-input-microphone"
D: [null-sink] module-null-sink.c: Thread starting up
D: [pulseaudio] module-device-restore.c: Could not set format on sink auto_null
I: [pulseaudio] module.c: Loaded "module-null-sink" (index: #16; argument: "sink_name=auto_null sink_properties='device.description="Dummy Output"'").
I: [pulseaudio] module.c: Loaded "module-always-sink" (index: #15; argument: "").
I: [pulseaudio] module.c: Loaded "module-intended-roles" (index: #17; argument: "").
D: [pulseaudio] module-suspend-on-idle.c: Sink auto_null becomes idle, timeout in 5 seconds.
I: [pulseaudio] module.c: Loaded "module-suspend-on-idle" (index: #18; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-console-kit.so': success
I: [pulseaudio] module.c: Loaded "module-console-kit" (index: #19; argument: "").
D: [pulseaudio] module.c: Checking for existence of '/usr/lib/pulse-5.0/modules/module-systemd-login.so': success
I: [pulseaudio] client.c: Created 0 "Login Session c1"
D: [pulseaudio] module-systemd-login.c: Added new session c1
I: [pulseaudio] module.c: Loaded "module-systemd-login" (index: #20; argument: "").
I: [pulseaudio] module.c: Loaded "module-position-event-sounds" (index: #21; argument: "").
D: [pulseaudio] module-role-cork.c: Using role 'phone' as trigger role.
D: [pulseaudio] module-role-cork.c: Using roles 'music' and 'video' as cork roles.
I: [pulseaudio] module.c: Loaded "module-role-cork" (index: #22; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-heuristics" (index: #23; argument: "").
I: [pulseaudio] module.c: Loaded "module-filter-apply" (index: #24; argument: "").
D: [pulseaudio] main.c: Got org.PulseAudio1!
D: [pulseaudio] main.c: Got org.pulseaudio.Server!
I: [pulseaudio] main.c: Daemon startup complete.
E: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name org.bluez was not provided by any .service files
I: [pulseaudio] module-suspend-on-idle.c: Sink auto_null idle f
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
-I see the mixer going up and down in pavucontrol if I play some music
└┼─$─┤▶ loginctl session-status c1
c1 - unkn0wn (1001)
Since: Thu 2014-04-17 21:18:58 CEST; 16min ago
Leader: 1048 (slim)
Seat: seat0; vc7
Display: :0.0
Remote: user root
Service: slim; type x11; class user
State: active
Unit: session-c1.scope
|-1048 /usr/bin/slim -nodaemon
|-2206 /usr/bin/openbox --startup /usr/lib/openbox/openbox-autostart OPENBOX
|-2214 dbus-launch --sh-syntax --exit-with-session
|-2215 /usr/bin/dbus-daemon --fork --print-pid 5 --print-address 7 --session
|-2227 tint2
|-2230 xcompmgr -CfF
|-2231 volumeicon
|-2236 conky -q
|-2238 /usr/lib/at-spi2-core/at-spi-bus-launcher
|-2252 /usr/bin/dbus-daemon --config-file=/etc/at-spi2/accessibility.conf --no...
|-2255 /usr/lib/at-spi2-core/at-spi2-registryd --use-gnome-session
|-2259 /usr/lib/gvfs/gvfsd
|-2263 /usr/lib/gvfs/gvfsd-fuse /run/user/1001/gvfs -f -o big_writes
|-2278 /usr/lib32/skype/skype
|-2320 /usr/lib/xfce4/notifyd/xfce4-notifyd
|-2322 /usr/lib/xfce4/xfconf/xfconfd
|-2376 firefox
|-2416 /usr/lib/virtualbox/VBoxXPCOMIPCD
└┼─$─┤▶ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: CX20590 Analog [CX20590 Analog]
Subdevices: 0/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 7: HDMI 1 [HDMI 1]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 8: HDMI 2 [HDMI 2]
Subdevices: 1/1
Subdevice #0: subdevice #0
└┼─$─┤▶ aplay -L
null
Discard all samples (playback) or generate zero samples (capture)
pulse
PulseAudio Sound Server
default
Default ALSA Output (currently PulseAudio Sound Server)
sysdefault:CARD=PCH
HDA Intel PCH, CX20590 Analog
Default Audio Device
front:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
Front speakers
surround40:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.0 Surround output to Front and Rear speakers
surround41:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=PCH,DEV=0
HDA Intel PCH, CX20590 Analog
7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
hdmi:CARD=PCH,DEV=0
HDA Intel PCH, HDMI 0
HDMI Audio Output
hdmi:CARD=PCH,DEV=1
HDA Intel PCH, HDMI 1
HDMI Audio Output
hdmi:CARD=PCH,DEV=2
HDA Intel PCH, HDMI 2
HDMI Audio Output
Don't really know what else to provide...
About my setup it's a thinkpad t420 not plugged in any hdmi screen or simething like that
Thank you
Last edited by Truc (2014-04-19 13:15:28)└┼─$─┤▶ fuser -v /dev/snd/*
USER PID ACCESS COMMAND
/dev/snd/controlC0: unkn0wn 2231 F.... volumeicon
└┼─$─┤▶ speaker-test -c 2 -t wav -D plughw:0,0
speaker-test 1.0.27.2
Playback device is plughw:0,0
Stream parameters are 48000Hz, S16_LE, 2 channels
WAV file(s)
Playback open error: -16,Device or resource busy
It says it's busy but I don't see anything that could use it. I quit skype before trying -
How to solve no sound in XP on new PCs after reboot. solution
hello all ..
how to know Many of us have chosen to install on their computers windows XP
and I think we all have a problem with sound.
When we already find correct drivers that make the sound appear,
there is another problem, after restart, the computer lost the driver.
and now I write, what to do, that it was not.
I do not mean to put in the startup file
that will be at every restart, Restarted UAA BUS DRIVER.
I mean to be a sound and speaker icon next to the clock without unnecessary processes ..
to solve the problem and enjoy the sound, you must copy from the computer where is installed Windows Vista SP2 x32 or x64
the file HDAUDBUS.SYS who find in Windows \ system32 \ DriverStore \ FileRepository \ HDAUDBUS.INF
then in our system, XP x32 or x64-based open device manager and then open the System device
and click on "Microsoft UAA Bus Driver" and select Update Driver
and then point out the place where you keep a file Hdaudbus.sys copied from Vista.
we do this with both "UAA bus driver" from device manager forced to manually update the driver,
and after enjoy the sounds and loudspeaker icon after every restart
vista x32 Hdaudbus.sys--> 548kb for XP x32 sp2/sp3
vista x64 Hdaudbus.sys--> 927kb for XP x64 sp2
enjoy http://www.speedyshare.com/files/23515304/UAA_BUS_DRIVER_z_VISTY.rarHi,
Witam na forum. Milo ponownie zobaczyc rodaka.
fingerprint sensor:
AuthenTec AES1610 Fingerprint Sensor here
kontroller IEEE1394 zgodny z OHCI:
IEEE1394 here
HP integrated Module:
Bluetooth wireless here
Zeby byc pewnym ze na pewno dostarcze ci dobre sterowniki audio prosze zeby postapil zgodnia z ponizsza procedura:
Go to Control Panel -> System -> Hardware -> Devices Manager
Click with right button of Your mouse on each yellow sign and choose properties. Then go to bottom details and paste here device id. This way we will know what it is.
Below You've got example how to do it:
How to get Recovery disk all informations here.
Links to get Vista recovery disk You may found here.
Z tym ze z tego co pamietam to niestety jezeli chodzi o Polske to nie zadziala.
Skontaktuj sie z HP i popros o taka plytke.
Contact with HP. How to do it all informations here (just choose Your country).
Jezeli beda jeszcze jakies problemy po prostu pytaj.
Message Edited by Daniel_Potyrala on 11-01-2009 01:50 PM
** Say thanks by clicking the "Thumb up" icon which is on the left. **
** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. ** -
[Solved] No sound on Dell XPS 13 2015 (9343) with BIOS A03
I have been unable to get sound to work on my new 2015 Dell XPS 13 Developer Edition running kernel 4.0.1-1-ARCH. Arch is the only OS installed.
I have checked the wiki page and this forum post, which seems to indicate it should work with this configuration out of the box.
However, audio does not play through the speakers (the speakers were working in the original Ubuntu 14.04 installation) and when I tried to un-mute the volume, as described in the ALSA wiki page I received the following message:
$ amixer sset Master unmute
amixer: Unable to find simple control 'Master',0
I am not sure what other pertinent information to post, please forgive my ignorance and let me know. Thank you for your assistance.
Last edited by lkarunan (2015-05-17 13:42:47)I have installed the patched kernel and rebooted twice but am still encountering the same problem. The only difference to altercation's instructions is that the aur package has been updated:
$ uname -r
4.0.2-1-xps13-alt
The output of amixer is identical to before. However, there are now two headphone channels visible in alsamixer, which were not present under the stock kernel.
┌─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
│ Card: HDA Intel PCH F1: Help │
│ Chip: Realtek ALC3263 F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: Headphone Mic [dB gain: -16.50, -16Esc: Exit │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ ┌──┐ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ >
│ │▒▒│ │▒▒│ │ │ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │▒▒│ │
│ ├──┤ ├──┤ ├──┤ └──┘ ├──┤ └──┘ ├──┤ │
│ │OO│ │OO│ │OO│ │OO│ │OO│ │
│ └──┘ └──┘ └──┘ └──┘ └──┘ │
│ 100 100<>100 20<>20 100<>100 100<>100 100<>100 100<>100 │
│ Master Headphon<Headphon>Headphon Speaker PCM Beep │
│ │
│ │
│
The channel which is set at 20 gives a continuous "beep" (sine tone?) through headphones, when they are plugged into the jack.
This is the other sound card visible in alsamixer (and the one that is displayed by default):
┌─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
│ Card: HDA Intel HDMI F1: Help │
│ Chip: Intel Broadwell HDMI F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: S/PDIF Esc: Exit │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ ┌───── Sound Card ──────┐ │
│ │- (default) │ │
│ │0 HDA Intel HDMI │ │
│ │1 HDA Intel PCH │ │
│ │ enter device name...│ │
│ └───────────────────────┘ │
│ < S/PDIF >S/PDIF 1 S/PDIF 2 │
│ │
│ │
─────────────────────── AlsaMixer v1.0.29 ────────────────────────┐
│ Card: HDA Intel HDMI F1: Help │
│ Chip: Intel Broadwell HDMI F2: System information │
│ View: F3:[Playback] F4: Capture F5: All F6: Select sound card │
│ Item: S/PDIF Esc: Exit │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ │
│ ┌──┐ ┌──┐ ┌──┐ │
│ │OO│ │OO│ │OO│ │
│ └──┘ └──┘ └──┘ │
│ < S/PDIF >S/PDIF 1 S/PDIF 2 │
│ │
The only other thing I have noticed in ~20 minutes of use are some graphical artefacts and flickering that occur with this kernel. I have previously set the Intel graphics acceleration to uxa, as described in the wiki, because of issues with virtual terminals and resuming from suspend. The graphical issues I am currently encountering are very minor, however.
Update:
Thanks to fumlead for this post. The problem seems to have been that the wrong card was set as default. Creating /etc/asound.conf and adding this:
pcm.!default {
type hw
card 1
has solved the problem under both the stock and aur kernels. I am going to stick with the stock kernel because of the graphical issues encountered with the alternate kernel. I am not currently using the audio jack for a microphone, which I believe should work for the alternate kernel but not the stock one.
There is a small bug with the speakers not automatically being silenced when headphones are plugged in, but hopefully that will be fixed in kernel 4.1.
Thank you to everyone who viewed and commented in this thread and special thanks to fumlead.
Last edited by lkarunan (2015-05-17 13:41:23) -
Hello,
Sound always worked for me, but when I started my computer today, my soundcard did not do anything for me. VLC nearly freezes when it tries to play a file, but there is no error message, just no sound.
I restarted several times and upgraded my installation to the latest packages, but no change.
I really don't know what to post here, 'cause I don't know which information is important in my case. I'd really appreciate someone pointing me to the right logfiles.
Regards,
kevin
EDIT: Sound is working when setting the audio device A/52 over S/PDIF (I have connected my soundcard's digital out - Creative Audigy 2 - to my amplifier), but no sound when trying normal stereo files like MP3s
Last edited by Kei (2010-06-03 13:59:49)Oh my god, I feel embarassed - I don't know why, but PCM was muted in mixer's settings, everythings fine..
How do I delete the post? -
Hi everyone!
I recently moved from Ubuntu to Arch (Yeah!). Everything was fine, the installation was quite easy and I found everything I needed with on the official repos and AUR.
I only have one major problem: There is absolutely no sound in my browser (I tried both Firefox and Chromium). The problem is not only with flash, html5 audio does not work either.
The sound works in vlc, xmms2 and everything else, except for the browsers. I tried to figure out the problem for hours, looking in many forums and installing different packages.
I don't know where to go now. I don't really understand how do sound works in Linux and I don't know which information I should give here and where to find it.
Does anyone have an idea ? Which information should I dump here to help ?
Thanks !
Last edited by lracicot (2013-05-04 05:50:15)Ok I solve my problem.
I have two sound card: "Generic" (HDMI) and "Generic_1" (Analog). The "alsa: default" device was set to "Generic".
I only changed the "alsa: default" device to use "Generic_1".
This post really helped my: https://bbs.archlinux.org/viewtopic.php?id=121049
Maybe you are looking for
-
Lost PBS and ch. 5 HD channels in clear QAM
We live in Newton MA and subscribe to the FiOS TV. We have a LCD TV mounted on kitchen wall that we could not find room for a HD STB and have been satisfied to have the PBS HD channel through clear QAM for the kids in the morning. This seems to hav
-
Hi All, In Guixt I want to Add a TextBox. In that, my requirement is to fill the textbox with date and save it. I want to know whether the date will be saved into the database table or not. I want to update that date into database table f
-
EAP-TLS authentication with ACS 5.2
Hi all, I have question on EAP-TLS with ACS 5.2. If I would like to implement the EAP-TLS with Microsoft CA, how will the machine and user authentication take place? Understand that the cert are required on both client and server end, but is this cer
-
How to expose JSR168 portlets from existing JSF webapp?
Hi all, I have a web application with JSF components, and a set of JSP pages that use these components. In WEB-INF, I also have a standard portlet.xml which describes what JSP page to expose for the declared portlet(s). Is there any administrative in
-
Entries in the smartform are repeating !!
Hi, I tried to develop a smartform for printing sales order header (vbak) details. The entries are repeating in the output. for example, for "2 orders, 4 entries" , for 3 orders, 9 entries"..... Please let me know what could be the wrong in the form.