[SOLVED]No sound in Nestopia update

I updated Nestopia today via pacman. I now have no sound when using ALSA. In the console, I get the error:
ALSA: Could not open soundcard (Device or resource busy)
All other programs that have sound function properly and this did work with previous versions. Any ideas?
Last edited by nadman10 (2012-09-22 18:23:39)

nadman10 wrote:That doesn't sound silly at all, in fact, it worked. I guess I just had a dumb moment. Thanks.
Sweet...
We all need a good nudge from time to time.
You're welcome.

Similar Messages

Sound problems after updating to ios7?

Even though the sound IS turned on, all games are without sound after the update - how do I get the sound back? Is it possible to reverse the update?
because I don't like it one bit!

Even though the sound IS turned on, all games are without sound after the update - how do I get the sound back? Is it possible to reverse the update?
because I don't like it one bit!

[SOLVED] Another "Sound broken after upgrade" thread

Hi. My sound stopped working at some point, probably after an upgrade. I've seen lot's of posts about this in the last month, but nothing is helping. My guess is that OSS is screwing with ALSA. Here is what it says in my pacman log.
Running OSS update script...
[2011-12-05 13:34]
[2011-12-05 13:34] -------------------------------------------------------------
[2011-12-05 13:34] Open Sound System was updated. Now you should restart the
[2011-12-05 13:34] daemon by running /etc/rc.d/oss restart.
[2011-12-05 13:34]
[2011-12-05 13:34] Please note that OSS stores some of its configuration files
[2011-12-05 13:34] at /usr/lib/oss. If you are upgrading from an older OSS
[2011-12-05 13:34] release and it doesn't work properly, try removing that
[2011-12-05 13:34] directory and reinstall this package.
[2011-12-05 13:34] -------------------------------------------------------------
[2011-12-05 13:34] upgraded oss (4.2_2005-1 -> 4.2_2005-2)
I tried removing the directory and reinstalling oss, but that didn't work. I also tried removing oss altogether, but pacman says that lib32-libflashsupport: requires oss. So I'm not sure what to do. I was trying this
http://wiki.archbang.org/index.php?titl … _with_Alsa
but I got the dependency conflict with libflashsupport.
What I want to do is force remove oss via pacman -Rf oss, then install the alsa-oss emulator, but I'm not sure if that will break something else.
I'm also willing to just wait and see if the next kernel update will fix it, if that doesn't take too long. I don't really use sound very often anyway, but I still want it to work. I'm running this kernel
Linux version 3.1.5-1-ARCH (tobias@T-POWA-LX) (gcc version 4.6.2 20111125 (prerelease) (GCC) ) #1 SMP PREEMPT Sat Dec 10 14:43:09 CET 2011
Thanks for any help.
Last edited by Pacopag (2012-01-09 14:57:18)

Sorry for bumping this rather useless post. But I just wanted to mention that the problem is fixed. What I did was to follow the link
http://wiki.archbang.org/index.php?titl … _with_Alsa
(but I don't know that even has anything to do with the solution, because the sound didn't work after doing this.)
But then, just today, there was a kernel upgrade, and now the sound works. Big thanks to the arch team.
Last edited by Pacopag (2012-01-09 14:56:41)

After i download ios 5.1.1 i cant install it there is msg tell me an error occurred installing ios 5.1.1 what can i do to solve this and install the update ( i have ipad 2 ) ?????

After i download ios 5.1.1 i cant install it there is msg tell me an error occurred installing ios 5.1.1 what can i do to solve this and install the update ( i have ipad 2 ) ?????

No codes on the error just msg in the center of the ipad tell me that without any codes :@

HT201413 May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"

May I know how to solve this problem "iPhone software update server could not be contacted or is temporarily unavailable"
Thank you.

Let's try the following document with that one.
iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server
(If the "Automatically detect settings" checkbox is already checked, try unchecking and rechecking it and clicking OK.)

I am having problem with my sound, after i updated to ios 6, apple please help

i am having problem with my sound, after i updated to ios 6, i can hear music with headphone only, apple please help

Try going into your settings and 'reset all settings'
You will need to retweak your device but it's been said to help with sound issues.

Help please, i lost my iphone 4s sound since i update to ios 7.0.6

Help please, i lost my iphone 4s sound since i update to ios 7.0.6,
Calls voice is okay but all other music, videos, apps all soundless

Have you tried reseting your device by holding home+power button until the apple logo appears? If this doesnt hel ,please back up your device and do a fresh restore with itunes. To do a restore, follow these steps:
http://support.apple.com/kb/ht1414
Hope I helped

TS1574 The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound. I updated software today. Still sound & video not wor

The video and sound was working on my computer two days ago (and has ALWAYS worked on my computer since purchasing it in 2010) but now for some reason I can't play video and there is no sound. I updated software today. Still sound & video not working.
Please help.

One of the following steps should help.
1. Install Adobe Flash Player.
    http://get.adobe.com/flashplayer/
    Restart computer. Relaunch Safari.
2. Enable Plug-ins
    Safari > Preferences > Security
    Web Content:
    Click in the box for "Enable Plug-ins".
3. Check whether you are currently in YouTube HTML 5 trial.
     http://www.youtube.com/html5
    At the bottom left of the page uncheck the box for
   "You are currently in the HTML5 trial".
4. Reset Safari.
    Click Safari in the menu bar.
    From the drop down select "Reset Safari".
    Uncheck the boxes next to all items.
    Check the box next to "Remove all website data".
    Click "Reset".
5. Turn off Extensions/Plug-ins if any that may interfere with Flash working properly.
    Safari > Preferences > Extensions
Best.

"Please connect to the internet-"problem solved by the latest Muse-update

Hi staff,
I'm happy to tell you that the former problem with the error message "Please connect to the internet…" when trying to start Muse is solved now by the latest update. At that time I talked to James Boag, he assumed Muse might not recognize my USB-modem (and I should try a different access point, which I didn't) but this is not an issue any more. When I launched Muse recently, it updated automatically and then started with no problems.
Thanks for the great work you've done in that matter.
Regards
Norbert

Hi arrakis13,
I’m afraid I cannot really help you.
I did not make any changes on my running system except that I’m on 10.8 Mountain Lion (upgraded from 10.6.8., no Lion in between), but this did not change the behavior of Muse at first. Only the update, which started automatically when I launched the app on August, 21, (still the trial version) caused the difference.
My firewall is on and in the firewall-options Muse has allowance for incoming connections, see the attached screenshot (sorry, in german, but you will understand the meaning). Airport is not active and I did not change my way to connect to the internet (as James Boag from Adobe suggested earlier, see also attached mailing). It just worked.
Meanwhile I upgraded to the official version (2.0.945) and still it works.
Hope you find a solution.
Regards
Norbert
Am 03.09.2012 um 04:18 schrieb arrakis13 <[email protected]>:
Re: "Please connect to the internet…"problem solved by the latest Muse-update
created by arrakis13 in Adobe Muse Bugs - View the full discussion
This is still happening for me. I downloaded the beta yesterday and am on 10.7. I run software update but Muse is not showing up as having an update. My firewall is not running. Any suggestions on how I can get this running would be much appreciated.
Please let me know.
Thanks!!
Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4668480#4668480
To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4668480#4668480. In the Actions box on the right, click the Stop Email Notifications link.
Start a new discussion in Adobe Muse Bugs by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

IPad speaker sounds blown after update

Speakers sound blown after update. Help

Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.

[SOLVED]no sound in both headphone and speaker after update (alsa)

No sound after update. But, I can hear sound in headphone after install pulseaudio, while there is no sound in speaker (after plugging out headphone). I have tried some methods in related wiki articles, such as alsa and pulseaudio, but not works.
My enviroment is arch64, kde. I have installed lib32-alsa-plugins lib32-libpulse lib32-openal.
Anything others I can do? Thanks for advance.
Here is the output:
xym@Arch ~ $ aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: PCH [HDA Intel PCH], device 0: ALC662 rev1 Analog [ALC662 rev1 Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
xym@Arch ~ $ lsmod | grep '^snd' | column -t
snd_hda_codec_hdmi 30162 1
snd_hda_codec_realtek 41295 1
snd_hda_intel 37000 3
snd_hda_codec 150305 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
snd_hwdep 6340 1 snd_hda_codec
snd_pcm 77645 3 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
snd_page_alloc 7242 2 snd_pcm,snd_hda_intel
snd_timer 18726 1 snd_pcm
snd 59109 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
xym@Arch ~ $ ls -l /dev/snd
total 0
drwxr-xr-x 2 root root 60 Jan 15 11:09 by-path
crw-rw----+ 1 root audio 116, 7 Jan 15 11:09 controlC0
crw-rw----+ 1 root audio 116, 6 Jan 15 11:09 hwC0D0
crw-rw----+ 1 root audio 116, 5 Jan 15 11:09 hwC0D3
crw-rw----+ 1 root audio 116, 4 Jan 15 12:17 pcmC0D0c
crw-rw----+ 1 root audio 116, 3 Jan 15 12:17 pcmC0D0p
crw-rw----+ 1 root audio 116, 2 Jan 15 12:17 pcmC0D3p
crw-rw---- 1 root audio 116, 1 Jan 15 11:09 seq
crw-rw----+ 1 root audio 116, 33 Jan 15 11:09 timer
amixer
Simple mixer control 'Master',0
Capabilities: pvolume pvolume-joined pswitch pswitch-joined
Playback channels: Mono
Limits: Playback 0 - 64
Mono: Playback 64 [100%] [0.00dB] [on]
Simple mixer control 'Headphone',0
Capabilities: pvolume pswitchs
Playback channels: Front Left - Front Rightss
Limits: Playback 0 - 64s
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'Speaker',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 64
Mono:
Front Left: Playback 64 [100%] [0.00dB] [off]
Front Right: Playback 64 [100%] [0.00dB] [off]
Simple mixer control 'PCM',0
Capabilities: pvolume
Playback channels: Front Left - Front Right
Limits: Playback 0 - 255
Mono:
Front Left: Playback 255 [100%] [0.00dB]
Front Right: Playback 255 [100%] [0.00dB]
Simple mixer control 'Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [on]
Front Right: Playback 31 [100%] [12.00dB] [on]
Simple mixer control 'Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 0 [0%] [0.00dB]
Front Right: 0 [0%] [0.00dB]
Simple mixer control 'IEC958',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
Simple mixer control 'Beep',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 0 [0%] [-34.50dB] [on]
Front Right: Playback 0 [0%] [-34.50dB] [on]
Simple mixer control 'Capture',0
Capabilities: cvolume cswitch
Capture channels: Front Left - Front Right
Limits: Capture 0 - 31
Front Left: Capture 31 [100%] [33.00dB] [on]
Front Right: Capture 31 [100%] [33.00dB] [on]
Simple mixer control 'Auto-Mute Mode',0
Capabilities: enum
Items: 'Disabled' 'Enabled'
Item0: 'Disabled'
Simple mixer control 'Digital',0
Capabilities: cvolume
Capture channels: Front Left - Front Right
Limits: Capture 0 - 120
Front Left: Capture 60 [50%] [0.00dB]
Front Right: Capture 60 [50%] [0.00dB]
Simple mixer control 'Internal Mic',0
Capabilities: pvolume pswitch
Playback channels: Front Left - Front Right
Limits: Playback 0 - 31
Mono:
Front Left: Playback 31 [100%] [12.00dB] [off]
Front Right: Playback 31 [100%] [12.00dB] [off]
Simple mixer control 'Internal Mic Boost',0
Capabilities: volume
Playback channels: Front Left - Front Right
Capture channels: Front Left - Front Right
Limits: 0 - 3
Front Left: 2 [67%] [20.00dB]
Front Right: 2 [67%] [20.00dB]
xym@Arch ~ $ speaker-test -c 2
speaker-test 1.0.27.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 2 channels
Using 16 octaves of pink noise
Rate set to 48000Hz (requested 48000Hz)
Buffer size range from 2048 to 16384
Period size range from 1024 to 1024
Using max buffer size 16384
Periods = 4
was set period_size = 1024
was set buffer_size = 16384
0 - Front Left
1 - Front Right
Time per period = 5.651882
0 - Front Left
1 - Front Right
Time per period = 5.973485
0 - Front Left
I can't hear any sound during this test.
/etc/modprobe.d/modprobe.conf
blacklist snd_intel8x0m
Last edited by XuYimin (2014-01-16 12:18:02)

straykat wrote:
XuYimin, can you please give more info on what you mean by "update (alsa)"? There is no "alsa" package in Arch as alsa & it's modules are part of the (linux) kernel.
As you have already gone into alsamixer to ensure the appropriate channels are unmuted & set at the desired level, have you also gone into your KDE systems settings -> Multimedia -> Audio and Video Settings & rechecked your settings?
sorry，it's really misleading in my words.what i want to say is 'no sound after update, and the sound system is alsa.'
i'm sure the approiate channels are unmuted. in the Video Setting, I tested all sound cards in the list, But i can't hear sound.

[SOLVED] mpd - no sound after Pulseaudio update

After update of Pulseaudio (1.04) I mpd doesn't work - there's no problem with other applications, only with mpd. I can't set volume and mpc says that there are problems with opening audio device:
eregus@arch ~ $ mpc
Black River - Street Games
[paused] #769/775 0:00/3:45 (0%)
volume: n/a repeat: off random: off single: off consume: off
ERROR: problems opening audio device
There's my /etc/mpd.conf:
music_directory "/mnt/sda3/music"
playlist_directory "/var/lib/mpd/playlists"
db_file "/var/lib/mpd/mpd.db"
log_file "syslog"
pid_file "/run/mpd/mpd.pid"
state_file "/var/lib/mpd/mpdstate"
user "mpd"
auto_update "yes"
input {
plugin "curl"
audio_output {
type "pulse"
name "pulse audio"
I use ALSA + Pulseaudio. My /etc/pulse/default.pa:
.nofail
.fail
load-module module-device-restore
load-module module-stream-restore
load-module module-card-restore
load-module module-augment-properties
load-module module-alsa-sink device=dmix
load-module module-alsa-source device=dsnoop
.ifexists module-udev-detect.so
.else
.endif
.ifexists module-jackdbus-detect.so
.nofail
load-module module-jackdbus-detect
.fail
.endif
.ifexists module-bluetooth-policy.so
load-module module-bluetooth-policy
.endif
.ifexists module-bluetooth-discover.so
load-module module-bluetooth-discover
.endif
.ifexists module-esound-protocol-unix.so
load-module module-esound-protocol-unix
.endif
load-module module-native-protocol-unix
load-module module-native-protocol-tcp auth-ip-acl=127.0.0.1
.ifexists module-gconf.so
.nofail
load-module module-gconf
.fail
.endif
load-module module-default-device-restore
load-module module-rescue-streams
load-module module-always-sink
load-module module-intended-roles
load-module module-suspend-on-idle
.ifexists module-console-kit.so
.nofail
load-module module-console-kit
.fail
.endif
.ifexists module-systemd-login.so
load-module module-systemd-login
.endif
load-module module-position-event-sounds
load-module module-role-cork
load-module module-filter-heuristics
load-module module-filter-apply
.ifexists module-dbus-protocol.so
load-module module-dbus-protocol
.endif
load-module module-switch-on-port-available
That's all. I would post /etc/asound.conf, but it seems that from last update it doesn't exist.
Thank you for any help
Last edited by Eregus (2013-04-03 19:22:29)

Eregus wrote:
Yes, I use X.
And yes, I know what's the problem with Pulseaudio - the tip in Arch Wiki didn't help.
Edit: Oh, I only tried that workaround, I didn't try to change user. I'll edit mpd.conf when I come back home.
according to your config, you used that workaround wrongly. it will only work, if you point to the pulse server IP in mpd.conf. So add the server line in your pulse output. (its most likely 127.0.0.1)
Last edited by Rasi (2013-04-03 15:36:03)

"Dirty" sound after Kernel update. [SOLVED]

First of all my sound have always been "dirty" on Linux, like if the speakers/headphones where broken. However, earlier today I configured my sound for the first time on Arch and had a terrific sound! Perfect and clear. However, after I updated, my sound configuration was messed up and now, after re-configuring it, it has this "broken" sound again. Anything I can do about it?
/Richard

So I won't have to re-configure the sound again if I get kernel -8? Like 5 minutes after I got kernel -7 I saw there was a new update but with my recent problem with kernel -7 kept me from updating. My sound works almost perfectly it's just that there's this tiny buzzing sound in the background all the time.

[SOLVED] No sound modules after kernel update

Hello,
after updating my kernel, I have no sound modules. Alsaconf can't detect card. My lspci sound card:
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
My lsmod:
Module Size Used by
joydev 9895 0
usbhid 35352 0
hid 82435 1 usbhid
nvidia 12069499 40
broadcom 7270 0
tg3 133684 0
ehci_hcd 40794 0
intel_ips 11245 0
psmouse 55501 0
libphy 16985 2 broadcom,tg3
i7core_edac 16231 0
serio_raw 4294 0
i2c_i801 8187 0
pcspkr 1819 0
evdev 9530 10
usbcore 144144 3 usbhid,ehci_hcd
edac_core 37552 3 i7core_edac
i2c_core 20460 2 nvidia,i2c_i801
sg 25429 0
iTCO_wdt 11789 0
button 4470 0
iTCO_vendor_support 1961 1 iTCO_wdt
processor 24224 0
fuse 66858 2
ext4 375413 3
mbcache 5881 1 ext4
jbd2 70667 1 ext4
crc16 1359 1 ext4
raid0 7958 2
md_mod 100392 3 raid0
sr_mod 14951 0
cdrom 36553 1 sr_mod
sd_mod 28275 8
pata_acpi 3376 0
ata_piix 22077 6
libata 166724 2 pata_acpi,ata_piix
scsi_mod 132794 4 sg,sr_mod,sd_mod,libata
And my kernel:
Linux nekroman 3.1.2-1-ARCH #1 SMP PREEMPT Tue Nov 22 09:17:56 CET 2011 x86_64 Intel(R) Core(TM) i5 CPU 760 @ 2.80GHz GenuineIntel GNU/Linux
Thanks for help.
//edit:
Reinstalled kernel and it works!
Last edited by Nekroman (2011-11-25 15:08:32)

how did you re-install the kernel? I've never done that, and am too experiencing sound issues.
--nixIT

[Solved]:No sound after updates!

My sound works pretty good before the updates,I'm using ALSA,I just can't hear anything when i play music or video now,I can not figure out what breaks my sound,here is my pacman log,please help me,thanks!
[2010-01-23 13:03] starting full system upgrade
[2010-01-23 13:04] upgraded perl-gnome2-wnck (0.15-2.1 -> 0.16-1)
[2010-01-23 13:04] upgraded perl-sub-uplevel (0.21_01-1 -> 0.22-1)
[2010-01-23 13:04] upgraded perl-test-exception (0.27-1 -> 0.29-1)
[2010-01-23 13:04] warning: directory permissions differ on var/lib/tor/
filesystem: 700 package: 755
[2010-01-23 13:04] upgraded tor (0.2.1.21-1 -> 0.2.1.22-1)
[2010-01-24 16:14] synchronizing package lists
[2010-01-24 16:15] starting full system upgrade
[2010-01-24 16:18] ATTENTION DB PACKAGE:
[2010-01-24 16:18] Please consider to run db_upgrade on Berkeley DB databases with a major db version number update.
[2010-01-24 16:18] upgraded db (4.8.24-1 -> 4.8.26-1)
[2010-01-24 16:18] upgraded gzip (1.3.13-1 -> 1.4-1)
[2010-01-24 16:18] upgraded tzdata (2009t-1 -> 2010a-1)
[2010-01-25 12:20] synchronizing package lists
[2010-01-25 12:21] starting full system upgrade
[2010-01-25 12:41] upgraded bluez (4.59-1 -> 4.60-1)
[2010-01-25 12:41] upgraded bzr (2.0.1-1 -> 2.0.4-1)
[2010-01-25 12:41] upgraded file (5.03-2 -> 5.04-1)
[2010-01-25 12:41] upgraded kernel26-firmware (2.6.32.4-1 -> 2.6.32.5-1)
[2010-01-25 12:41] >>>
[2010-01-25 12:41] >>> If you use the LILO bootloader, you should run 'lilo' before rebooting.
[2010-01-25 12:41] >>>
[2010-01-25 12:41] >>> Updating module dependencies. Please wait ...
[2010-01-25 12:42] >>> MKINITCPIO SETUP
[2010-01-25 12:42] >>> ----------------
[2010-01-25 12:42] >>> If you use LVM2, Encrypted root or software RAID,
[2010-01-25 12:42] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2010-01-25 12:42] >>> More information about mkinitcpio setup can be found here:
[2010-01-25 12:42] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2010-01-25 12:42]
[2010-01-25 12:42] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2010-01-25 12:42] ==> Building image "default"
[2010-01-25 12:42] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2010-01-25 12:42] :: Begin build
[2010-01-25 12:42] :: Parsing hook [base]
[2010-01-25 12:42] :: Parsing hook [udev]
[2010-01-25 12:42] :: Parsing hook [autodetect]
[2010-01-25 12:42] :: Parsing hook [pata]
[2010-01-25 12:42] :: Parsing hook [scsi]
[2010-01-25 12:42] :: Parsing hook [sata]
[2010-01-25 12:42] :: Parsing hook [filesystems]
[2010-01-25 12:42] :: Generating module dependencies
[2010-01-25 12:42] :: Generating image '/boot/kernel26.img'...SUCCESS
[2010-01-25 12:42] ==> SUCCESS
[2010-01-25 12:42] ==> Building image "fallback"
[2010-01-25 12:42] ==> Running command: /sbin/mkinitcpio -k 2.6.32-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2010-01-25 12:42] :: Begin build
[2010-01-25 12:42] :: Parsing hook [base]
[2010-01-25 12:42] :: Parsing hook [udev]
[2010-01-25 12:42] :: Parsing hook [pata]
[2010-01-25 12:42] :: Parsing hook [scsi]
[2010-01-25 12:42] :: Parsing hook [sata]
[2010-01-25 12:42] :: Parsing hook [filesystems]
[2010-01-25 12:42] :: Generating module dependencies
[2010-01-25 12:42] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2010-01-25 12:42] ==> SUCCESS
[2010-01-25 12:42] upgraded kernel26 (2.6.32.4-1 -> 2.6.32.5-1)
[2010-01-25 12:43] upgraded kernel26-headers (2.6.32.4-1 -> 2.6.32.5-1)
[2010-01-25 12:43] upgraded moc (2.4.4-3 -> 2.5.0_alpha4-1)
[2010-01-25 12:43] upgraded pciutils (3.1.4-1 -> 3.1.5-1)
[2010-01-25 12:43] upgraded util-linux-ng (2.16.2-1 -> 2.17-1)
[2010-01-25 12:43] upgraded xz-utils (4.999.9beta-1 -> 4.999.9beta-2)
[2010-01-25 18:39] synchronizing package lists
[2010-01-25 18:40] starting full system upgrade
[2010-01-25 18:49] warning: /etc/logrotate.d/crond installed as /etc/logrotate.d/crond.pacnew
[2010-01-25 18:49] upgraded dcron (3.2-4 -> 4.4-1)
[2010-01-25 18:49] upgraded python (2.6.4-1 -> 2.6.4-2)
[2010-01-25 22:45] installed phonon-xine (4.3.1-2)
[2010-01-25 23:07] removed phonon-xine (4.3.1-2)
[edit]This occurs on an Acer 4736G(laptop).
Last edited by cael (2010-01-28 14:15:54)

demonicanima wrote:
I'm having the same problem. Sound worked last night after some updates...fails today after some more updates.
This is true with multiple players (mplayer/audacious/vlc).
I don't even get the beep I usually get when I shutdown.
Here are the updates that you and I have in common.
upgraded db (4.8.24-1 -> 4.8.26-1)
upgraded gzip (1.3.13-1 -> 1.4-1)
upgraded tzdata (2009t-1 -> 2010a-1)
upgraded bluez (4.59-1 -> 4.60-1)
upgraded file (5.03-2 -> 5.04-1)
upgraded kernel26-firmware (2.6.32.4-1 -> 2.6.32.5-1)
upgraded kernel26 (2.6.32.4-1 -> 2.6.32.5-1)
upgraded pciutils (3.1.4-1 -> 3.1.5-1)
upgraded util-linux-ng (2.16.2-1 -> 2.17-1)
upgraded xz-utils (4.999.9beta-1 -> 4.999.9beta-2)
upgraded python (2.6.4-1 -> 2.6.4-2)
upgraded dcron (3.2-4 -> 4.4-1)
Figured more information wouldn't hurt.
[edit]: Forgot to mention, this occurs on an Acer Aspire One.
I met this problem first time,before this my sound works pretty good,i hope it will be fixed in next update!

[SOLVED]No sound in Nestopia update

Similar Messages

Maybe you are looking for