[Solved] No sound on my arch workstation (after update)

Hi,
I yesterday updated my workstation and installed linux 3.17.4. After a reboot, the sound magically disappeared In fact I don't know, if it's related to the updated, it was coincedented but may be not related.
I found the alse information script, the output can be seen here:
http://www.alsa-project.org/db/?f=579e7 … 7f90c8b6f5
I can provide an update log if it helps.
Thankfully
S4bleknight
Last edited by s4bleknight (2014-12-04 10:13:12)

It is not only the linux kernel, but i just tested downgrading and it didn't has any effect.
I am not using Pulseaudio or somthing like this, the log says i have jack installed but not running. The Soundcard is an HDA Intel PCH with an ALC269VB Codec. I tried to figure out my last steps i made before the sound stopped working. From the log i know, that yesterday after the update, the workstation was rebooted. I have not changed anything in the configuration yesterday so, it has to be connected to the update. This is the pacman log:
[2014-12-02 08:59] [PACMAN] starting full system upgrade
[2014-12-02 09:01] [PACMAN] removed dirmngr (1.1.1-3)
[2014-12-02 09:01] [PACMAN] upgraded tzdata (2014i-1 -> 2014j-1)
[2014-12-02 09:01] [PACMAN] upgraded glibc (2.20-2 -> 2.20-4)
[2014-12-02 09:01] [PACMAN] upgraded binutils (2.24-7 -> 2.24-8)
[2014-12-02 09:01] [PACMAN] upgraded bluez-libs (5.25-1 -> 5.25-2)
[2014-12-02 09:01] [PACMAN] upgraded caps (0.9.23-1 -> 0.9.24-1)
[2014-12-02 09:01] [PACMAN] upgraded libdbus (1.8.8-1 -> 1.8.10-1)
[2014-12-02 09:01] [PACMAN] upgraded expat (2.1.0-3 -> 2.1.0-4)
[2014-12-02 09:01] [PACMAN] upgraded dbus (1.8.8-1 -> 1.8.10-1)
[2014-12-02 09:01] [PACMAN] upgraded pcre (8.36-1 -> 8.36-2)
[2014-12-02 09:01] [PACMAN] upgraded glib2 (2.42.0-1 -> 2.42.1-1)
[2014-12-02 09:01] [PACMAN] upgraded kmod (18-2 -> 19-1)
[2014-12-02 09:01] [PACMAN] upgraded lz4 (123-1 -> 124-1)
[2014-12-02 09:01] [PACMAN] upgraded libsystemd (217-6 -> 217-8)
[2014-12-02 09:01] [PACMAN] upgraded systemd (217-6 -> 217-8)
[2014-12-02 09:01] [PACMAN] upgraded mesa-dri (10.3.3-1 -> 10.3.4-1)
[2014-12-02 09:01] [PACMAN] upgraded mesa (10.3.3-1 -> 10.3.4-1)
[2014-12-02 09:01] [PACMAN] upgraded clutter (1.20.0-1 -> 1.20.0-2)
[2014-12-02 09:01] [PACMAN] upgraded cronie (1.4.11-2 -> 1.4.12-1)
[2014-12-02 09:01] [PACMAN] upgraded libpng (1.6.13-1 -> 1.6.15-1)
[2014-12-02 09:01] [PACMAN] upgraded libcups (2.0.0-2 -> 2.0.1-1)
[2014-12-02 09:01] [PACMAN] upgraded cups (2.0.0-2 -> 2.0.1-1)
[2014-12-02 09:01] [PACMAN] upgraded device-mapper (2.02.111-1 -> 2.02.112-1)
[2014-12-02 09:01] [PACMAN] upgraded dhcpcd (6.6.1-1 -> 6.6.4-1)
[2014-12-02 09:01] [PACMAN] installed npth (1.1-1)
[2014-12-02 09:01] [PACMAN] upgraded libgpg-error (1.16-1 -> 1.17-1)
[2014-12-02 09:01] [PACMAN] upgraded libksba (1.3.0-1 -> 1.3.2-1)
[2014-12-02 09:01] [PACMAN] upgraded libassuan (2.1.1-1 -> 2.1.3-1)
[2014-12-02 09:01] [PACMAN] upgraded pinentry (0.8.4-1 -> 0.9.0-1)
[2014-12-02 09:01] [PACMAN] upgraded gnupg (2.0.26-1 -> 2.1.0-6)
[2014-12-02 09:01] [PACMAN] upgraded harfbuzz (0.9.35-2 -> 0.9.36-1)
[2014-12-02 09:01] [PACMAN] upgraded libass (0.11.2-1 -> 0.12.0-1)
[2014-12-02 09:01] [PACMAN] upgraded ffmpeg (1:2.4.3-1 -> 1:2.4.4-1)
[2014-12-02 09:01] [PACMAN] upgraded file (5.20-1 -> 5.20-2)
[2014-12-02 09:01] [PACMAN] upgraded sqlite (3.8.7.1-1 -> 3.8.7.2-1)
[2014-12-02 09:01] [PACMAN] upgraded firefox (33.1-1 -> 34.0.5-1)
[2014-12-02 09:01] [PACMAN] upgraded flac (1.3.0-4 -> 1.3.1-1)
[2014-12-02 09:01] [PACMAN] upgraded flashplugin (11.2.202.411-1 -> 11.2.202.424-1)
[2014-12-02 09:01] [PACMAN] upgraded libxml2 (2.9.2-1 -> 2.9.2-2)
[2014-12-02 09:01] [PACMAN] upgraded fontforge (20141014-1 -> 20141126-1)
[2014-12-02 09:01] [PACMAN] upgraded gnome-desktop (1:3.14.1-1 -> 1:3.14.2-1)
[2014-12-02 09:01] [PACMAN] upgraded gnome-themes-standard (3.14.0-1 -> 3.14.2.3-1)
[2014-12-02 09:01] [PACMAN] upgraded grep (2.20-1 -> 2.21-1)
[2014-12-02 09:01] [PACMAN] upgraded groff (1.22.2-7 -> 1.22.3-2)
[2014-12-02 09:01] [PACMAN] upgraded libcdio (0.92-1 -> 0.93-1)
[2014-12-02 09:01] [PACMAN] upgraded libcdio-paranoia (10.2+0.90+1-2 -> 10.2+0.93+1-1)
[2014-12-02 09:01] [PACMAN] upgraded gvfs (1.22.2-1 -> 1.22.2-3)
[2014-12-02 09:01] [PACMAN] upgraded libwbclient (4.1.13-1 -> 4.1.14-1)
[2014-12-02 09:01] [PACMAN] upgraded smbclient (4.1.13-1 -> 4.1.14-1)
[2014-12-02 09:01] [PACMAN] upgraded gvfs-smb (1.22.2-1 -> 1.22.2-3)
[2014-12-02 09:01] [PACMAN] upgraded vim-runtime (7.4.473-1 -> 7.4.537-1)
[2014-12-02 09:01] [PACMAN] upgraded ruby (2.1.4-1 -> 2.1.5-1)
[2014-12-02 09:01] [PACMAN] upgraded gvim (7.4.473-1 -> 7.4.537-1)
[2014-12-02 09:01] [PACMAN] upgraded harfbuzz-icu (0.9.35-2 -> 0.9.36-1)
[2014-12-02 09:01] [PACMAN] upgraded libx86emu (1.1.21.6-1 -> 1.1.23.1-1)
[2014-12-02 09:01] [PACMAN] upgraded hwinfo (21.5.1.1-1 -> 21.8.1.1-1)
[2014-12-02 09:01] [PACMAN] upgraded imagemagick (6.8.9.9-1 -> 6.9.0.0-1)
[2014-12-02 09:01] [PACMAN] upgraded libaio (0.3.109-7 -> 0.3.110-1)
[2014-12-02 09:01] [PACMAN] upgraded libcdr (0.1.0-2 -> 0.1.1-1)
[2014-12-02 09:01] [PACMAN] upgraded libevdev (1.3-1 -> 1.3.1-1)
[2014-12-02 09:01] [PACMAN] upgraded libftdi (1.1-6 -> 1.2-1)
[2014-12-02 09:01] [PACMAN] upgraded libjpeg-turbo (1.3.1-1 -> 1.3.1-3)
[2014-12-02 09:01] [PACMAN] upgraded libmusicbrainz5 (5.0.1-2 -> 5.1.0-1)
[2014-12-02 09:01] [PACMAN] upgraded libnautilus-extension (3.14.0-2 -> 3.14.2-1)
[2014-12-02 09:01] [PACMAN] upgraded libodfgen (0.1.1-1 -> 0.1.2-1)
[2014-12-02 09:01] [PACMAN] upgraded libpurple (2.10.10-2 -> 2.10.11-1)
[2014-12-02 09:01] [PACMAN] upgraded libsodium (1.0.0-1 -> 1.0.1-1)
[2014-12-02 09:01] [PACMAN] upgraded libteam (1.11-1 -> 1.14-1)
[2014-12-02 09:01] [PACMAN] upgraded libuv (0.11.29-1 -> 1.0.1-1)
[2014-12-02 09:01] [PACMAN] upgraded libwebp (0.4.1-1 -> 0.4.2-1)
[2014-12-02 09:01] [PACMAN] upgraded libxdg-basedir (1.2.0-2 -> 1.2.0-3)
ALPM-Scriplet stuff
[2014-12-02 09:02] [PACMAN] upgraded linux (3.17.2-1 -> 3.17.4-1)
[2014-12-02 09:02] [PACMAN] upgraded linux-headers (3.17.2-1 -> 3.17.4-1)
[2014-12-02 09:02] [PACMAN] upgraded lvm2 (2.02.111-1 -> 2.02.112-1)
[2014-12-02 09:02] [PACMAN] upgraded mercurial (3.2-1 -> 3.2.1-1)
[2014-12-02 09:02] [PACMAN] upgraded mesa-libgl (10.3.3-1 -> 10.3.4-1)
[2014-12-02 09:02] [PACMAN] upgraded nautilus (3.14.0-2 -> 3.14.2-1)
[2014-12-02 09:02] [PACMAN] upgraded nodejs (0.10.33-4 -> 0.10.33-7)
[2014-12-02 09:02] [PACMAN] upgraded orc (0.4.19-1 -> 0.4.22-1)
[2014-12-02 09:02] [PACMAN] upgraded pacman-mirrorlist (20141108-1 -> 20141116-1)
[2014-12-02 09:02] [PACMAN] upgraded pacman (4.1.2-6 -> 4.1.2-7)
[2014-12-02 09:02] [PACMAN] upgraded pcsclite (1.8.12-1 -> 1.8.13-1)
[2014-12-02 09:02] [PACMAN] upgraded pidgin (2.10.10-2 -> 2.10.11-1)
[2014-12-02 09:02] [PACMAN] upgraded pyqt4-common (4.11.2-1 -> 4.11.3-1)
[2014-12-02 09:02] [PACMAN] upgraded python-numpy (1.9.0-1 -> 1.9.1-1)
[2014-12-02 09:02] [PACMAN] upgraded python-pytz (2014.7-1 -> 2014.9-1)
[2014-12-02 09:02] [PACMAN] upgraded sip (4.16.3-1 -> 4.16.4-1)
[2014-12-02 09:02] [PACMAN] upgraded python-sip (4.16.3-1 -> 4.16.4-1)
[2014-12-02 09:02] [PACMAN] upgraded raptor (2.0.14-2 -> 2.0.15-1)
[2014-12-02 09:02] [PACMAN] upgraded rdesktop (1.8.2-1 -> 1.8.3-1)
[2014-12-02 09:02] [PACMAN] upgraded rlwrap (0.41-1 -> 0.42-1)
[2014-12-02 09:02] [PACMAN] upgraded samba (4.1.13-1 -> 4.1.14-1)
[2014-12-02 09:02] [PACMAN] upgraded sushi (3.12.0-1 -> 3.12.0-2)
[2014-12-02 09:02] [PACMAN] upgraded systemd-sysvcompat (217-6 -> 217-8)
[2014-12-02 09:02] [PACMAN] upgraded tcl (8.6.2-1 -> 8.6.3-1)
[2014-12-02 09:02] [PACMAN] upgraded texinfo (5.2-2 -> 5.2-3)
[2014-12-02 09:02] [PACMAN] upgraded the_silver_searcher (0.26.0-1 -> 0.27.0-1)
[2014-12-02 09:02] [PACMAN] upgraded tk (8.6.2-1 -> 8.6.3-1)
[2014-12-02 09:02] [PACMAN] upgraded valgrind (3.10.0-1 -> 3.10.1-1)
[2014-12-02 09:02] [ALPM-SCRIPTLET] In order to use the new version, reload all virtualbox modules manually.
[2014-12-02 09:02] [PACMAN] upgraded virtualbox-host-modules (4.3.18-4 -> 4.3.20-2)
[2014-12-02 09:02] [PACMAN] upgraded virtualbox (4.3.18-1 -> 4.3.20-1)
[2014-12-02 09:02] [PACMAN] upgraded vlc (2.1.5-4 -> 2.1.5-5)
[2014-12-02 09:02] [PACMAN] upgraded webkit2gtk (2.6.2-1 -> 2.6.4-1)
[2014-12-02 09:02] [PACMAN] upgraded xf86-input-evdev (2.9.0-2 -> 2.9.1-1)
[2014-12-02 09:02] [PACMAN] upgraded xorg-xkbcomp (1.2.4-2 -> 1.3.0-1)
[2014-12-02 09:02] [PACMAN] upgraded xterm (312-1 -> 313-1)

Similar Messages

After updating to 6.1.3 my phone has no sound, no ringtone, no keytone, after updating to 6.1.3 my phone has no sound, no ringtone, no keytone. How can I fix this?

After updating to 6.1.3 my phone has no sound, no ringtone, no keytone, after updating to 6.1.3 my phone has no sound, no ringtone, no keytone. How can I fix this?

This happened to me too, so I took it to the Genius Bar at my local Apple Store. They said it was coincedental and the speaker needed to be replaced. They did so and the problem was solved!

[SOLVED] vi (vim) no longer works properly after updating the system

After updating the system with pacman -Syu vi stopped working. All syntax colors are gone, and everything is grey. When I press i to enter "insert" mode, editing is not visible. Changes are obscure and you can't tell what you are modifying. Quitting with :q will still prompt you to use :q! to abort changes, even if no changes were visibly made.
When scrolling to the beginning or end of a file, the screen flashes with grey glitch like areas. What happened to my vi!?!?!?!?!?
This all happened while following the beginner's guide to install arch linux. I realized this when trying to arbitrarily read a test file I made directly after updating.
The problems continued to be visible when installing and setting up sudo (those steps are the next steps that require vi)... I think the sudo installation worked... but my vi is horribly glitchy
Any ideas?
Last edited by trusktr (2010-02-19 07:19:55)

Setting EDITOR does not help in every case. For instance, visudo is by default hard linked to vi. (You can change this, I know. )
But in fact, vi is only a symlink to ex. So I simply renamed this link and put another symlink to vim (vim-big in my case since I in fact do use the gvim package).
/usr/bin/vi -> vim-big
/usr/bin/vi-simple -> ex
The drawback is that I have to set those links on every vi-update. (But I sure will remember...)
Last edited by bernarcher (2010-02-19 00:58:57)

[SOLVED] Gnome 3.2 - Applications Menu empty after update

After updating all my boxes from 3.0 to 3.2, one of them got the Applications Menu wiped. The .desktop files are all there but none show up in the Menu, it's just empty.
Apart from that everything seems to work just fine, did anyone came across a similiar problem or knows a solution ? I tried to google how to regenerate the Menu but failed to find anything useful and/or gnome3 related.
Last edited by Votan (2011-10-05 10:03:09)

Votan wrote:
After updating all my boxes from 3.0 to 3.2, one of them got the Applications Menu wiped. The .desktop files are all there but none show up in the Menu, it's just empty.
Apart from that everything seems to work just fine, did anyone came across a similiar problem or knows a solution ? I tried to google how to regenerate the Menu but failed to find anything useful and/or gnome3 related.
Have you rebooted? Mine regenerated after a power on/off

[SOLVED]Gnome 3.6: Icons are missing after updating

I did a (somewhat large) update yesterday which seemed to go fine. Since then, I'm missing a bunch of icons from various parts of Gnome. I'll attach some pictures that show what Nautilus looks like and the desktop top right menus. I use Faience icons usually, but changing it back to Gnome default doesn't help. I also deleted all the hidden Gnome configuration files, but that didn't help either.
This is my pacman log from the upgrade.
[2013-03-26 22:34] starting full system upgrade
[2013-03-26 22:43] upgraded bash (4.2.042-3 -> 4.2.045-1)
[2013-03-26 22:43] upgraded acpid (2.0.18-1 -> 2.0.18-2)
[2013-03-26 22:43] upgraded art-sharp (2.24.2-2 -> 2.24.2-3)
[2013-03-26 22:43] upgraded icu (50.1.2-1 -> 51.1-1)
[2013-03-26 22:43] upgraded boost-libs (1.52.0-1 -> 1.52.0-2)
[2013-03-26 22:43] upgraded sqlite (3.7.15.2-1 -> 3.7.16-1)
[2013-03-26 22:43] upgraded libffi (3.0.11-1 -> 3.0.12-1)
[2013-03-26 22:43] upgraded wayland (1.0.5-1 -> 1.0.6-1)
[2013-03-26 22:43] upgraded libgcrypt (1.5.0-3 -> 1.5.1-1)
[2013-03-26 22:43] upgraded shadow (4.1.5.1-4 -> 4.1.5.1-5)
[2013-03-26 22:43] upgraded util-linux (2.22.2-1 -> 2.22.2-2)
[2013-03-26 22:43] upgraded systemd (197-4 -> 198-2)
[2013-03-26 22:43] upgraded mesa (9.1-2 -> 9.1.1-1)
[2013-03-26 22:43] installed mesa-libgl (9.1.1-1)
[2013-03-26 22:43] upgraded libxi (1.6.2-1 -> 1.7-1)
[2013-03-26 22:43] upgraded qt4 (4.8.4-13 -> 4.8.4-16)
[2013-03-26 22:43] upgraded bitcoin-qt (0.8.0-2 -> 0.8.1-1)
[2013-03-26 22:43] upgraded boost (1.52.0-1 -> 1.52.0-2)
[2013-03-26 22:43] upgraded gstreamer (1.0.5-1 -> 1.0.6-1)
[2013-03-26 22:43] upgraded gst-plugins-base-libs (1.0.5-1 -> 1.0.6-1)
[2013-03-26 22:43] g_module_open() failed for /usr/lib/gdk-pixbuf-2.0/2.10.0/loaders/libpixbufloader-svg.so: libicule.so.50: cannot open shared object file: No such file or directory
[2013-03-26 22:43] upgraded gdk-pixbuf2 (2.26.5-1 -> 2.26.5-2)
[2013-03-26 22:43] upgraded gst-plugins-good (1.0.5-1 -> 1.0.6-1)
[2013-03-26 22:43] upgraded libtracker-sparql (0.14.4-3 -> 0.14.5-1)
[2013-03-26 22:43] upgraded brasero (3.6.1-1 -> 3.6.1-2)
[2013-03-26 22:43] upgraded brltty (4.4-3 -> 4.4-4)
[2013-03-26 22:43] upgraded cgminer (2.11.2-1 -> 2.11.3-2)
[2013-03-26 22:43] upgraded gnutls (3.1.9-1 -> 3.1.10-1)
[2013-03-26 22:43] upgraded libcups (1.6.1-6 -> 1.6.2-1)
[2013-03-26 22:43] upgraded gtk-update-icon-cache (2.24.16-1 -> 2.24.17-1)
[2013-03-26 22:43] gtk-query-immodules-2.0: error while loading shared libraries: libicule.so.50: cannot open shared object file: No such file or directory
[2013-03-26 22:43] upgraded gtk2 (2.24.16-1 -> 2.24.17-1)
[2013-03-26 22:43] upgraded chromium (25.0.1364.172-1 -> 25.0.1364.172-2)
[2013-03-26 22:43] upgraded polkit (0.109-1 -> 0.110-1)
[2013-03-26 22:43] warning: /etc/colord.conf installed as /etc/colord.conf.pacnew
[2013-03-26 22:43] upgraded colord (0.1.28-1 -> 0.1.31-1)
[2013-03-26 22:43] upgraded colord-gtk (0.1.24-1 -> 0.1.25-1)
[2013-03-26 22:43] upgraded poppler (0.22.1-3 -> 0.22.2-1)
[2013-03-26 22:43] upgraded cups-filters (1.0.30-1 -> 1.0.31-1)
[2013-03-26 22:43] upgraded cups (1.6.1-6 -> 1.6.2-1)
[2013-03-26 22:43] upgraded dbus-glib (0.100-1 -> 0.100.2-1)
[2013-03-26 22:43] upgraded iptables (1.4.16.3-1 -> 1.4.18-1)
[2013-03-26 22:43] upgraded iproute2 (3.7.0-1 -> 3.8.0-1)
[2013-03-26 22:43] upgraded dhclient (4.2.4.2-1 -> 4.2.5-1)
[2013-03-26 22:43] upgraded dnssec-anchors (20120422-1 -> 20130320-1)
[2013-03-26 22:43] upgraded gconf (3.2.5-3 -> 3.2.6-1)
[2013-03-26 22:43] upgraded perl (5.16.2-4 -> 5.16.3-1)
[2013-03-26 22:43] upgraded imagemagick (6.8.2.3-1 -> 6.8.4.0-1)
[2013-03-26 22:43] upgraded emacs (24.2-4 -> 24.3-1)
[2013-03-26 22:43] upgraded evolution-data-server (3.6.3-1 -> 3.6.4-1)
[2013-03-26 22:43] upgraded evolution (3.6.3-1 -> 3.6.4-1)
[2013-03-26 22:43] warning: /etc/gshadow installed as /etc/gshadow.pacnew
[2013-03-26 22:43] warning: /etc/group installed as /etc/group.pacnew
[2013-03-26 22:43] upgraded filesystem (2013.01-3 -> 2013.03-2)
[2013-03-26 22:43] upgraded flashplugin (11.2.202.273-1 -> 11.2.202.275-1)
[2013-03-26 22:43] upgraded gconf-sharp (2.24.2-2 -> 2.24.2-3)
[2013-03-26 22:43] upgraded gnome-vfs-sharp (2.24.2-2 -> 2.24.2-3)
[2013-03-26 22:43] upgraded libgnome-sharp (2.24.2-2 -> 2.24.2-3)
[2013-03-26 22:43] upgraded gconf-sharp-peditors (2.24.2-2 -> 2.24.2-3)
[2013-03-26 22:43] upgraded gegl (0.2.0-5 -> 0.2.0-6)
[2013-03-26 22:43] upgraded geoclue (0.12.0-5 -> 0.12.99-1)
[2013-03-26 22:43] upgraded gettext (0.18.2-1 -> 0.18.2.1-1)
[2013-03-26 22:43] upgraded git (1.8.1.5-1 -> 1.8.2-1)
[2013-03-26 22:43] upgraded gnome-common (3.6.0-1 -> 3.7.4-1)
[2013-03-26 22:43] upgraded gnome-nettool (3.2.0-1 -> 3.2.0-2)
[2013-03-26 22:43] upgraded gnome-sharp (2.24.2-2 -> 2.24.2-3)
[2013-03-26 22:43]
[2013-03-26 22:43] (gconftool-2:18619): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
[2013-03-26 22:43] Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[2013-03-26 22:43]
[2013-03-26 22:43] (gconftool-2:18626): GConf-WARNING **: Client failed to connect to the D-BUS daemon:
[2013-03-26 22:43] Did not receive a reply. Possible causes include: the remote application did not send a reply, the message bus security policy blocked the reply, the reply timeout expired, or the network connection was broken.
[2013-03-26 22:43] upgraded gnome-terminal (3.6.0-1 -> 3.6.1-1)
[2013-03-26 22:43] upgraded gparted (0.14.1-5 -> 0.15.0-1)
[2013-03-26 22:43] upgraded gpgme (1.3.1-5 -> 1.3.2-1)
[2013-03-26 22:43] Warning: Could not load "/usr/lib/graphviz/libgvplugin_gd.so.6" - file not found
[2013-03-26 22:43] /tmp/alpm_9sCOCH/.INSTALL: line 1: 18644 Segmentation fault (core dumped) usr/bin/dot -c
[2013-03-26 22:43] upgraded graphviz (2.30.1-1 -> 2.30.1-2)
[2013-03-26 22:43] upgraded gst-plugins-bad (1.0.5-1 -> 1.0.6-1)
[2013-03-26 22:43] upgraded gst-plugins-base (1.0.5-1 -> 1.0.6-1)
[2013-03-26 22:43] upgraded harfbuzz (0.9.9-3 -> 0.9.14-1)
[2013-03-26 22:43] warning: directory permissions differ on var/log/hp/
filesystem: 777 package: 775
[2013-03-26 22:43] upgraded hplip (3.13.3-1 -> 3.13.3-2)
[2013-03-26 22:43] upgraded hwloc (1.6.1-1 -> 1.6.2-1)
[2013-03-26 22:43] upgraded i3-wm (4.4-2 -> 4.5.1-1)
[2013-03-26 22:43] upgraded intel-dri (9.1-2 -> 9.1.1-1)
[2013-03-26 22:43] upgraded iso-codes (3.38-1 -> 3.41-1)
[2013-03-26 22:43] warning: /etc/laptop-mode/laptop-mode.conf installed as /etc/laptop-mode/laptop-mode.conf.pacnew
[2013-03-26 22:43] upgraded laptop-mode-tools (1.62-2 -> 1.63-1)
[2013-03-26 22:43] upgraded lib32-gettext (0.18.2-1 -> 0.18.2.1-1)
[2013-03-26 22:43] upgraded lib32-gnutls (3.1.9-1 -> 3.1.10-1)
[2013-03-26 22:43] upgraded lib32-libcups (1.6.1-1 -> 1.6.2-1)
[2013-03-26 22:43] upgraded lib32-libxi (1.6.2-1 -> 1.7-1)
[2013-03-26 22:43] usr/bin/gtk-query-immodules-2.0-32: error while loading shared libraries: libGL.so.1: cannot open shared object file: No such file or directory
[2013-03-26 22:43] upgraded lib32-gtk2 (2.24.16-1 -> 2.24.17-1)
[2013-03-26 22:43] upgraded lib32-libffi (3.0.11-1 -> 3.0.12-1)
[2013-03-26 22:43] upgraded lib32-systemd (197-1 -> 198-1)
[2013-03-26 22:43] upgraded lib32-mesa (9.1-2 -> 9.1.1-1)
[2013-03-26 22:43] upgraded ncurses (5.9-4 -> 5.9-5)
[2013-03-26 22:43] upgraded lib32-ncurses (5.9-1 -> 5.9-2)
[2013-03-26 22:43] upgraded lib32-soundtouch (1.7.1-1 -> 1.7.1-2)
[2013-03-26 22:43] upgraded lib32-sqlite (3.7.15.2-1 -> 3.7.16-1)
[2013-03-26 22:43] installed lib32-gstreamer0.10 (0.10.36-2)
[2013-03-26 22:43] installed lib32-orc (0.4.17-1)
[2013-03-26 22:43] installed lib32-gstreamer0.10-base (0.10.36-4)
[2013-03-26 22:43] upgraded lib32-wxgtk (2.8.12-1 -> 2.8.12.1-4)
[2013-03-26 22:43] upgraded libassuan (2.0.3-1 -> 2.1.0-1)
[2013-03-26 22:43] upgraded libraw1394 (2.0.7-2 -> 2.1.0-1)
[2013-03-26 22:43] upgraded libdc1394 (2.1.3-2 -> 2.2.1-1)
[2013-03-26 22:43] upgraded libdvdcss (1.2.12-1 -> 1.2.13-1)
[2013-03-26 22:43] upgraded libebml (1.2.2-2 -> 1.3.0-1)
[2013-03-26 22:43] upgraded libgnome-keyring (3.6.0-1 -> 3.6.0-2)
[2013-03-26 22:43] Users no longer need to be in the 'camera' group to use camera devices
[2013-03-26 22:43] upgraded libgphoto2 (2.5.0-1 -> 2.5.1-1)
[2013-03-26 22:43] upgraded libmatroska (1.3.0-2 -> 1.4.0-1)
[2013-03-26 22:43] upgraded libproxy (0.4.7-2 -> 0.4.11-1)
[2013-03-26 22:43] upgraded raptor (2.0.9-1 -> 2.0.9-2)
[2013-03-26 22:43] upgraded redland (1:1.0.16-1 -> 1:1.0.16-2)
[2013-03-26 22:43] upgraded libreoffice-common (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-base (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-calc (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-draw (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-gnome (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-impress (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-kde4 (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-math (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-postgresql-connector (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-sdk (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-sdk-doc (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libreoffice-writer (4.0.1-2 -> 4.0.1-5)
[2013-03-26 22:43] upgraded libsasl (2.1.23-9 -> 2.1.23-10)
[2013-03-26 22:43] upgraded libssh (0.5.3-1 -> 0.5.4-1)
[2013-03-26 22:43] upgraded libwbclient (3.6.12-2 -> 3.6.13-1)
[2013-03-26 22:43] upgraded lv2 (1.2.0-1 -> 1.4.0-1)
[2013-03-26 22:43] upgraded sord (0.10.4-1 -> 0.12.0-1)
[2013-03-26 22:43] upgraded sratom (0.4.0-1 -> 0.4.2-1)
[2013-03-26 22:43] upgraded lilv (0.14.4-1 -> 0.16.0-1)
[2013-03-26 22:43] >>> Updating module dependencies. Please wait ...
[2013-03-26 22:43] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-03-26 22:43] ==> Building image from preset: 'default'
[2013-03-26 22:43] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-03-26 22:43] ==> Starting build: 3.8.4-1-ARCH
[2013-03-26 22:43] -> Running build hook: [base]
[2013-03-26 22:43] -> Running build hook: [udev]
[2013-03-26 22:43] -> Running build hook: [autodetect]
[2013-03-26 22:43] findmnt: /etc/fstab: parse error at line 1
[2013-03-26 22:43] -> Running build hook: [modconf]
[2013-03-26 22:43] -> Running build hook: [block]
[2013-03-26 22:43] -> Running build hook: [filesystems]
[2013-03-26 22:43] -> Running build hook: [keyboard]
[2013-03-26 22:43] -> Running build hook: [fsck]
[2013-03-26 22:43] ==> Generating module dependencies
[2013-03-26 22:43] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-03-26 22:43] ==> Image generation successful
[2013-03-26 22:43] ==> Building image from preset: 'fallback'
[2013-03-26 22:43] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-03-26 22:43] ==> Starting build: 3.8.4-1-ARCH
[2013-03-26 22:43] -> Running build hook: [base]
[2013-03-26 22:43] -> Running build hook: [udev]
[2013-03-26 22:43] -> Running build hook: [modconf]
[2013-03-26 22:43] -> Running build hook: [block]
[2013-03-26 22:43] -> Running build hook: [filesystems]
[2013-03-26 22:43] -> Running build hook: [keyboard]
[2013-03-26 22:43] -> Running build hook: [fsck]
[2013-03-26 22:43] ==> Generating module dependencies
[2013-03-26 22:43] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-03-26 22:43] ==> Image generation successful
[2013-03-26 22:43] upgraded linux (3.7.10-1 -> 3.8.4-1)
[2013-03-26 22:44] upgraded linux-headers (3.7.10-1 -> 3.8.4-1)
[2013-03-26 22:44] upgraded man-pages (3.48-1 -> 3.50-1)
[2013-03-26 22:44] upgraded morituri (0.2.0-2 -> 0.2.0-4)
[2013-03-26 22:44] upgraded mpfr (3.1.1.p2-2 -> 3.1.2-1)
[2013-03-26 22:44] upgraded nemo (1.7.1-2 -> 1.7.2-1)
[2013-03-26 22:44] upgraded obex-data-server (0.4.6-4 -> 0.4.6-5)
[2013-03-26 22:44] upgraded openssh (6.1p1-6 -> 6.2p1-1)
[2013-03-26 22:44] installed python2-speechd (0.7.1-1)
[2013-03-26 22:44] upgraded orca (3.6.3-2 -> 3.6.3-3)
[2013-03-26 22:44] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
[2013-03-26 22:44] upgraded pacman-mirrorlist (20130203-1 -> 20130323-1)
[2013-03-26 22:44] upgraded perl-http-message (6.03-1 -> 6.06-1)
[2013-03-26 22:44] upgraded perl-net-http (6.03-1 -> 6.06-1)
[2013-03-26 22:44] upgraded poppler-glib (0.22.1-3 -> 0.22.2-1)
[2013-03-26 22:44] upgraded poppler-qt (0.22.1-3 -> 0.22.2-1)
[2013-03-26 22:44] upgraded python2-pycdio (0.19-1 -> 0.19-2)
[2013-03-26 22:44] upgraded qt5-base (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qt5-jsbackend (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qt5-xmlpatterns (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qt5-declarative (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qt5-webkit (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qt5-script (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qt5-quick1 (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qt5-translations (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qt5-tools (5.0.1-6 -> 5.0.1-10)
[2013-03-26 22:44] upgraded qtcreator (2.7.0rc-1 -> 2.7.0-1)
[2013-03-26 22:44] upgraded qtwebkit (2.3.beta2-2 -> 2.3.0-1)
[2013-03-26 22:44] upgraded redland-storage-virtuoso (1:1.0.16-1 -> 1:1.0.16-2)
[2013-03-26 22:44] upgraded ruby (1.9.3_p392-1 -> 2.0.0_p0-1)
[2013-03-26 22:44] upgraded smbclient (3.6.12-2 -> 3.6.13-1)
[2013-03-26 22:44] upgraded samba (3.6.12-2 -> 3.6.13-1)
[2013-03-26 22:44] upgraded sg3_utils (1.33-1 -> 1.35-1)
[2013-03-26 22:44] upgraded skype (4.1.0.20-5 -> 4.1.0.20-6)
[2013-03-26 22:44] upgraded slim (1.3.5-1 -> 1.3.5-2)
[2013-03-26 22:44] installed lib32-mesa-libgl (9.1.1-1)
[2013-03-26 22:44] if you are running x86_64, you need the lib32 opt depends for your driver
[2013-03-26 22:44]
[2013-03-26 22:44] if you are having problems with the steam license, remove .steam and .local/share/Steam
[2013-03-26 22:44] upgraded steam (1.0.0.35-1 -> 1.0.0.36-1)
[2013-03-26 22:44] upgraded sudo (1.8.6.p7-1 -> 1.8.6.p7-2)
[2013-03-26 22:44] upgraded suil (0.6.10-2 -> 0.6.12-1)
[2013-03-26 22:44] upgraded systemd-sysvcompat (197-4 -> 198-2)
[2013-03-26 22:44] upgraded texinfo (5.0-1 -> 5.1-1)
[2013-03-26 22:44] >>> texlive: updating the filename database...
[2013-03-26 22:44] mktexlsr: Updating /etc/texmf/ls-R...
[2013-03-26 22:44] mktexlsr: Updating /usr/share/texmf/ls-R...
[2013-03-26 22:44] mktexlsr: Updating /usr/share/texmf-dist/ls-R...
[2013-03-26 22:44] mktexlsr: Updating /var/lib/texmf/ls-R...
[2013-03-26 22:44] mktexlsr: Done.
[2013-03-26 22:44] recreating all formats... done.
[2013-03-26 22:44] (logs are under /var/lib/texmf/web2c/<engine>/<formatname>.log)
[2013-03-26 22:44] upgraded texlive-bin (2012.0-7 -> 2012.0-8)
[2013-03-26 22:44] upgraded tigervnc (1.2.0-11 -> 1.2.0-12)
[2013-03-26 22:44] upgraded tp_smapi (0.41-14 -> 0.41-15)
[2013-03-26 22:44] upgraded upower (0.9.19-1 -> 0.9.20-1)
[2013-03-26 22:44] upgraded tracker (0.14.4-3 -> 0.14.5-1)
[2013-03-26 22:44] upgraded tzdata (2013a-1 -> 2013b-1)
[2013-03-26 22:44] installed guisu (0.5-1)
[2013-03-26 22:44] upgraded unetbootin (583-4 -> 583-5)
[2013-03-26 22:44] upgraded vim-runtime (7.3.798-1 -> 7.3.834-1)
[2013-03-26 22:44] upgraded vim (7.3.798-1 -> 7.3.834-1)
[2013-03-26 22:44] In order to use the new version, reload all virtualbox modules manually.
[2013-03-26 22:44] upgraded virtualbox-host-modules (4.2.8-1 -> 4.2.10-2)
[2013-03-26 22:44] upgraded virtualbox (4.2.8-1 -> 4.2.10-2)
[2013-03-26 22:44] upgraded virtualbox-guest-iso (4.2.8-1 -> 4.2.10-1)
[2013-03-26 22:44] upgraded virtualbox-guest-modules (4.2.8-1 -> 4.2.10-2)
[2013-03-26 22:44] upgraded webkitgtk2 (1.10.2-2 -> 1.10.2-3)
[2013-03-26 22:44] upgraded webkitgtk3 (1.10.2-2 -> 1.10.2-3)
[2013-03-26 22:44] upgraded wine (1.5.25-2 -> 1.5.26-1)
[2013-03-26 22:44] upgraded xdg-user-dirs-gtk (0.9-1 -> 0.10-1)
[2013-03-26 22:44] upgraded xf86-input-evdev (2.7.3-2 -> 2.8.0-1)
[2013-03-26 22:44] upgraded xf86-video-intel (2.21.3-1 -> 2.21.5-1)
[2013-03-26 22:44] upgraded xmms2 (0.8DrO_o-9 -> 0.8DrO_o-10)
[2013-03-26 22:44] upgraded xorg-server-common (1.13.3-1 -> 1.14.0-2)
[2013-03-26 22:44] upgraded xorg-server (1.13.3-1 -> 1.14.0-2)
[2013-03-26 22:45] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
[2013-03-26 22:45] Running 'pacman -Rdd mesa-libgl lib32-mesa-libgl'
[2013-03-26 22:45] removed lib32-mesa-libgl (9.1.1-1)
[2013-03-26 22:45] removed mesa-libgl (9.1.1-1)
[2013-03-26 22:45] Running 'pacman -S nvidia nvidia-utils lib32-nvidia-utils'
[2013-03-26 22:45] installed nvidia-utils (313.26-1)
[2013-03-26 22:45] In order to use nvidia module, reboot the system.
[2013-03-26 22:45] installed nvidia (313.26-2)
[2013-03-26 22:45] installed lib32-nvidia-utils (313.26-1)
Any ideas on what might have caused this?
Last edited by themusicalduck (2013-03-27 16:12:28)

hadrons123 wrote:
Sorry my bad
its
pacman -S librsvg
themusicalduck wrote:That did it. Thanks!
I had the same problem and nemo/nautilus was crashing in a segfault few seconds after starting, now all works fine, thanks! :-)

[Solved]E17 startup apps don't start after update.

[2013-01-23 16:30] Running 'pacman -Syu'
[2013-01-23 16:30] synchronizing package lists
[2013-01-23 16:30] starting full system upgrade
[2013-01-23 16:38] upgraded cairo (1.12.8-2 -> 1.12.10-2)
[2013-01-23 16:38] upgraded icu (50.1.1-1 -> 50.1.2-1)
[2013-01-23 16:38] upgraded harfbuzz (0.9.9-2 -> 0.9.9-3)
[2013-01-23 16:38] upgraded imagemagick (6.8.0.7-1 -> 6.8.1.9-1)
[2013-01-23 16:38] upgraded inkscape (0.48.4-2 -> 0.48.4-3)
[2013-01-23 16:38] >>> Updating module dependencies. Please wait ...
[2013-01-23 16:38] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2013-01-23 16:38] ==> Building image from preset: 'default'
[2013-01-23 16:38] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
[2013-01-23 16:38] ==> Starting build: 3.7.4-1-ARCH
[2013-01-23 16:38] -> Running build hook: [base]
[2013-01-23 16:38] -> Running build hook: [udev]
[2013-01-23 16:38] -> Running build hook: [autodetect]
[2013-01-23 16:38] -> Running build hook: [modconf]
[2013-01-23 16:38] -> Running build hook: [block]
[2013-01-23 16:38] -> Running build hook: [filesystems]
[2013-01-23 16:38] -> Running build hook: [usbinput]
[2013-01-23 16:38] -> Running build hook: [fsck]
[2013-01-23 16:38] -> Running build hook: [keymap]
[2013-01-23 16:38] ==> Generating module dependencies
[2013-01-23 16:38] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
[2013-01-23 16:38] ==> Image generation successful
[2013-01-23 16:38] ==> Building image from preset: 'fallback'
[2013-01-23 16:38] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
[2013-01-23 16:38] ==> Starting build: 3.7.4-1-ARCH
[2013-01-23 16:38] -> Running build hook: [base]
[2013-01-23 16:38] -> Running build hook: [udev]
[2013-01-23 16:38] -> Running build hook: [modconf]
[2013-01-23 16:38] -> Running build hook: [block]
[2013-01-23 16:38] -> Running build hook: [filesystems]
[2013-01-23 16:38] -> Running build hook: [usbinput]
[2013-01-23 16:38] -> Running build hook: [fsck]
[2013-01-23 16:38] -> Running build hook: [keymap]
[2013-01-23 16:38] ==> Generating module dependencies
[2013-01-23 16:38] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
[2013-01-23 16:38] ==> Image generation successful
[2013-01-23 16:38] upgraded linux (3.7.3-1 -> 3.7.4-1)
[2013-01-23 16:38] upgraded qt (4.8.4-1 -> 4.8.4-2)
One of these packages broke it. Disabled and reenabled the startup apps in the settings but no go. Worked fine this morning when i turned on the computer. Any ideas?
Last edited by 89c51 (2013-01-23 15:07:48)

Never mind.
It fixed itself after a couple reboots

[SOLVED] Plasma workspace crash (SIGSEGV) at login after update

Hi all,
after I updated via pacman -Syu last weekend and rebooted my system I got a plasma workspace crash at the login which happens ever since.
I get:
The application Plasma Workspace (plasma) crashed and caused the signal 11 (SIGSEGV).
Please help us improve the software you use by filing a report at http://bugs.kde.org. Useful details include how to reproduce the error, documents that were loaded, etc.
and the following bug report:
This backtrace appears to be of no use.
This is probably because your packages are built in a way which prevents creation of proper backtraces, or the stack frame was seriously corrupted in the crash.
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
(no debugging symbols found)
[Thread debugging using libthread_db enabled]
[New Thread 0xb496f720 (LWP 3637)]
[New Thread 0xa928bb70 (LWP 3638)]
0xb8054424 in __kernel_vsyscall ()
[Current thread is 0 (LWP 3637)]
Thread 2 (Thread 0xa928bb70 (LWP 3638)):
#0 0xb8054424 in __kernel_vsyscall ()
#1 0xb635ac55 in pthread_cond_wait@@GLIBC_2.3.2 () from /lib/libpthread.so.0
#2 0xb63d83e7 in QWaitCondition::wait () from /usr/lib/libQtCore.so.4
#3 0xa95709f2 in RenderThread::run () from /usr/lib/kde4/plasma_wallpaper_image.so
#4 0xb63d73be in ?? () from /usr/lib/libQtCore.so.4
#5 0xb63566bc in start_thread () from /lib/libpthread.so.0
#6 0xb61a2ffe in clone () from /lib/libc.so.6
Thread 1 (Thread 0xb496f720 (LWP 3637)):
#0 0xb8054424 in __kernel_vsyscall ()
#1 0xb616cb26 in nanosleep () from /lib/libc.so.6
#2 0xb616c911 in sleep () from /lib/libc.so.6
#3 0xb76cce12 in KCrash::startDrKonqi () from /usr/lib/libkdeui.so.5
#4 0xb76cda84 in KCrash::defaultCrashHandler () from /usr/lib/libkdeui.so.5
#5 <signal handler called>
#6 0xb645fb57 in QIODevice::isOpen () from /usr/lib/libQtCore.so.4
#7 0xb6809ee7 in QImageReader::supportedImageFormats () from /usr/lib/libQtGui.so.4
#8 0xb6762e06 in ?? () from /usr/lib/libQtGui.so.4
#9 0xb6763fbc in ?? () from /usr/lib/libQtGui.so.4
#10 0xb7b5940f in KIO::pasteActionText () from /usr/lib/libkio.so.5
#11 0xa9525406 in FolderView::createActions () from /usr/lib/kde4/plasma_applet_folderview.so
#12 0xa952adda in FolderView::init () from /usr/lib/kde4/plasma_applet_folderview.so
#13 0xb7ffd6d7 in DesktopCorona::saveDefaultSetup () from /usr/lib/libkdeinit4_plasma.so
#14 0xb7ffdf18 in DesktopCorona::qt_metacall () from /usr/lib/libkdeinit4_plasma.so
#15 0xb64de831 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#16 0xb64df4a2 in QMetaObject::activate () from /usr/lib/libQtCore.so.4
#17 0xb64e3967 in ?? () from /usr/lib/libQtCore.so.4
#18 0xb64e3a7c in ?? () from /usr/lib/libQtCore.so.4
#19 0xb64d879f in QObject::event () from /usr/lib/libQtCore.so.4
#20 0xb674d6ac in QApplicationPrivate::notify_helper () from /usr/lib/libQtGui.so.4
#21 0xb6754e44 in QApplication::notify () from /usr/lib/libQtGui.so.4
#22 0xb7656bfa in KApplication::notify () from /usr/lib/libkdeui.so.5
#23 0xb64c874b in QCoreApplication::notifyInternal () from /usr/lib/libQtCore.so.4
#24 0xb64f6a26 in ?? () from /usr/lib/libQtCore.so.4
#25 0xb64f3ad0 in ?? () from /usr/lib/libQtCore.so.4
#26 0xb4db0288 in g_main_context_dispatch () from /usr/lib/libglib-2.0.so.0
#27 0xb4db3878 in g_main_context_iterate () from /usr/lib/libglib-2.0.so.0
#28 0xb4db39ea in g_main_context_iteration () from /usr/lib/libglib-2.0.so.0
#29 0xb64f3a1c in QEventDispatcherGlib::processEvents () from /usr/lib/libQtCore.so.4
#30 0xb67ec5c5 in ?? () from /usr/lib/libQtGui.so.4
#31 0xb64c6cd9 in QEventLoop::processEvents () from /usr/lib/libQtCore.so.4
#32 0xb64c7122 in QEventLoop::exec () from /usr/lib/libQtCore.so.4
#33 0xb64c949f in QCoreApplication::exec () from /usr/lib/libQtCore.so.4
#34 0xb674d527 in QApplication::exec () from /usr/lib/libQtGui.so.4
#35 0xb8003e16 in kdemain () from /usr/lib/libkdeinit4_plasma.so
#36 0x0804876b in _start ()
#0 0xb8054424 in __kernel_vsyscall ()
The packages I've updated befor this bug appeared are:
[2009-05-24 09:55] upgraded dbus-core (1.2.4.6permissive-1 -> 1.2.14-1)
[2009-05-24 09:55] upgraded dbus (1.2.4.6permissive-1 -> 1.2.14-1)
[2009-05-24 09:55] upgraded ppp (2.4.4-7 -> 2.4.4-8)
[2009-05-24 09:55]
[2009-05-24 09:55] > Qt 4.5.1
[2009-05-24 09:55]
[2009-05-24 09:55] Prefix: /usr
[2009-05-24 09:55]
[2009-05-24 09:55] > ATTENTION
[2009-05-24 09:55] Some components are split into separate packages:
[2009-05-24 09:55]
[2009-05-24 09:55] qtmod : Base libraries and tools
[2009-05-24 09:55] qtmod-doc : Documentation
[2009-05-24 09:55] qtmod-demos : Demos & Examples
[2009-05-24 09:55] qtmod-tools : Development Tools (Assistant, Designer, Linguist)
[2009-05-24 09:55]
[2009-05-24 09:55] upgraded qtmod (4.5.1-2 -> 4.5.1-3)
However I've downgraded all of them back but the crash remains. I also removed qtmod and installed qt from the arch repositories but still no effect on the bug. Also tried to rename the .kde4/ folder to make KDE generating a new plain folder but doesn't help with the problem. Even complete removal of KDEmod and new installation didn't make a change.
I hope someone can help cause I'm runnig out of ideas what to try next.
thanks, potzi
Last edited by potzi (2009-06-03 22:43:52)

You can find old packages here:
http://arm.kh.nu/
That repo has saved my life a number of times. Especially with BLUETOOTH GRRRR.
As for getting all your old settings back, I didn't investigate this enough because i only have opensuse for curiosity as I think they do some really great stuff.
Basically I hadn't yet isolated what was causing the problems before I gave up because every time I tried to merge my old settings in to the new user account, I recreated the problem. No logical (subjective term obviously) separation of what to merge and what not to merge worked. So I gave up and just did everything manually. Sorry that I couldn't be more helpful.
Last edited by tim (2009-05-27 23:59:53)

[SOLVED]Low performance of nvidia 290.40 after updated.

UPDATED
Update to 290.49 and be solved.
ORIGINAL
Updated my system, nvidia was updated to 290.40 from 290.33. After rebooted, GNOME 3 was crashed, and the same to GDM.
I can start KDE, but have to go with unbearable slow, and programs with OpenGL is also very very slow, so now I can only use Openbox and firefox, even Totem does not work now.
Followings are solution I found:
1. I searched the forum and found 2 posts, from which I could find a solution: Downgrade nvidia to 290.33:
i. https://bbs.archlinux.org/viewtopic.php?id=139553
ii. https://bbs.archlinux.org/viewtopic.php?id=139535
2. Having searched Google, I found another one which eventually proved helpless: Rebuild kernel with kernel config CONFIG_AGP set to y
The problem can be solved by following the solution 1, but I want a better solution.
Need more useful information? Just tell me in the reply.
I hope my english won't puzzle you.
Appreciate very much.
Last edited by nopriler (2012-05-04 13:35:08)

nopriler wrote:However, I have cleaned the cache, so that is unsuitable for me.
https://wiki.archlinux.org/index.php/Do … ckages#ARM

I don't have any sound coming from my speakers after updating my HP Envy H8-1513C?????

Since I updated my HP Envy H8-1513C i don't have any sounds coming from my monitors. I also can't seem to get any sync cords for my iphone 4 to work with my computer. These always worked before the update???

I recommend going through the troubleshooting section in this document to see if any of that can resolve your issue.
Have you tried a hard reset yet?
I work on behalf of HP (But this isn't my job)
Mark my post as “Accept as Solution" if you feel my post solved your issue, so that others with the same question can find the answer.
Please give me Kudos if I wrote something that helped you.

[SOLVED] System load on idle is ~.30 after update

After doing an update my system load now hovers around ~.30 when idle. I have a pretty mininal system so this shouldn't be too hard to figure out. Before the update my system load would usually read 0.00 0.01 0.05 when It was idling. Now it seems to jump at random times.
Conditions which seem to produce a higher load are when:
MPD is playing a song, Having it run while stopped does nothing
A program is running that measures the system load such as htop or i3status
Firefox is running. It seems to effect the load more now (but I could be wrong on this one)
Even without X running, if I have htop or top running the system load spikes randomly. If I check it periodically with uptime the load stays at 0.
This is the pacman log from the time I last knew for sure that the load acted normal up until now:
[2012-05-11 17:51] Running 'pacman -Syu'
[2012-05-11 17:51] synchronizing package lists
[2012-05-11 17:51] starting full system upgrade
[2012-05-11 17:51] upgraded blender (3:2.63-1 -> 4:2.63a-1)
[2012-05-11 17:51] upgraded libpulse (1.1-4 -> 2.0-1)
[2012-05-11 17:51] upgraded libusb-compat (0.1.3-2 -> 0.1.4-1)
[2012-05-12 13:27] Running 'pacman -Syu'
[2012-05-12 13:27] synchronizing package lists
[2012-05-12 13:27] starting full system upgrade
[2012-05-12 13:27] upgraded cairo (1.10.2-3 -> 1.12.2-1)
[2012-05-12 13:27] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
[2012-05-12 13:27] upgraded git (1.7.10.1-1 -> 1.7.10.2-1)
[2012-05-12 13:27] upgraded i3status (2.5-1 -> 2.5.1-1)
[2012-05-12 13:27] upgraded java-jline (1.0-1 -> 1.0-2)
[2012-05-12 13:27] upgraded kmod (8-1 -> 8-2)
[2012-05-12 13:27] upgraded libvpx (1.0.0-1 -> 1.1.0-1)
[2012-05-12 13:27] upgraded libxi (1.6.0-1 -> 1.6.1-1)
[2012-05-12 13:27] upgraded man-pages (3.39-1 -> 3.40-1)
[2012-05-12 13:27] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
[2012-05-12 13:27] upgraded taglib (1.7.1-1 -> 1.7.2-1)
[2012-05-12 13:27] upgraded xorg-server-common (1.12.1-1 -> 1.12.1-2)
[2012-05-12 13:27] upgraded xorg-server (1.12.1-1 -> 1.12.1-2)
[2012-05-12 19:05] Running 'pacman -Syu'
[2012-05-12 19:05] synchronizing package lists
[2012-05-12 19:05] starting full system upgrade
[2012-05-12 19:06] upgraded gtk3 (3.4.2-2 -> 3.4.3-1)
[2012-05-12 19:06] upgraded i3lock (2.4-1 -> 2.4-2)
[2012-05-12 19:06] upgraded mpg123 (1.14.1-1 -> 1.14.2-1)
I'm pretty sure things were normal after the 2012-05-12 13:27 (1st) update but I don't know for sure and I didn't want to leave anything out. I also believe the problem started after the 2012-05-12 13:27 (2nd) update but again, I didn't want to leave anything out.
Any ideas?
Last edited by dudefellaguy (2012-05-14 02:56:53)

litemotiv, luuuciano: I agree that the "solution" is not a very good one, but, taking the stated problem and context of where it was posted into consideration I think that "[SOLVED]" is appropriate. My system load no longer idles at a high number (which was the originally stated problem in the subject field) and this subforum is particular to pacman upgrading issues, not to linux kernel issues. But if you really think that I should remove the tag, then I will, because, based on your post counts, you two obviously have more forum experience than I do.

No audio or sound from my ipad mini after update or any apps used? What should i do please help?

my problem is i can't hear the sounds from my ipad especially when i am playing a music or video from youtube or any game up. This happen after an update? I thought it was just an auto silent mode but unfortunately the volume limit is on full and there is no head phones attached. Please help me enable the sounds of my ipad.

Is it all browsers that you are having problems with, or is just Safari (and I assume that your last post means that other apps are ok) ?
If only Safari then try clearing its cache : Settings > Safari > Clear History And Website Data (Clear Cookies And Data on iOS 5, 6, 7 and also Clear History)
Close Safari via the iPad's taskbar (I'm assuming that your iPad is on iOS 7+) : double-click the home button to open the taskbar and then swipe or drag the Safari app's 'screen' up and off the top of the screen to close it, and click the home button to close the taskbar.
And do a soft-reset : press and hold both the sleep and home buttons for about 10 to 15 seconds (ignore the red slider), after which the Apple logo should appear - you won't lose any content, it's the iPad equivalent of a reboot.
And then retry playing the videos.

[Solved] High load average even when idle after update

Hello arch fellows!
I have a Dell Inspiron N4110 intel i5 4gb ram. I think it is a decent laptop and should run Arch Linux pretty well, right? Well, it does until I run 'pacman -Syu'. After the update, the load average gets over 1.00 even when idle. It hardly gets under 0.40. Before updating, the average is under 0.10 most times. The command top doesn't show me anything. All the processes are practically 0%. It seems to me the problem would be the kernel, am I right? But I tried the fallback option when booting but it is the same.
Does anybody have an idea of what could be the problem? I appreciate any help.
Last edited by sollidsnake (2012-05-18 00:32:52)

Thanks for the reply. It was really a kernel problem. I downgraded it to an older version and it looks normal now

Extra sound card no longer blacklisted after update, causing no sound

I'm using ALSA and Pulse Audio, and an ASUS Xonar Essence ST sound card. My ATi video card also has a sound card, which goes to my monitor using HDMI. While the ATi card is in use, the ASUS card doesn't function, so previously I've blacklisted it with
echo blacklist snd_hda_intel | sudo tee -a /etc/modprobe.d/blacklist
Ever since I updated yesterday, the blacklisting has been ignored, despite the line "blacklist snd_hda_intel" being in my modprobe.d/blacklist file.
Did some recent update change the purpose of /etc/modprobe.d? Could I either properly get it to blacklist, or get the ASUS card to be used properly without blacklisting anything?

As far as I remember, all files in /etc/modprobe.d/ must end with .conf extension.

[SOLVED] Dual boot with Windows 8, problems after updating Windows

Hi all,
I have been maintaining a dual boot of arch and Windows 8 for some time. I recently updated Windows to 8.1, and found that the update process had two side effects:
1) The update added a new partition in the middle of my file table, so my /etc/fstab which referenced "/dev/sda6" was wrong because that partition is now "/dev/sda7."
2) The default boot device was switched to the Windows Boot Loader instead of grub. But, this is not a problem because I can work around this by using the "Choose boot device" feature of my bios at start up.
So, neither of these problems are critical for me at the moment. I can fix my fstab and just press a hotkey at startup.
EDIT: I have avoided the /etc/fstab issue by referencing my partitions using UUID as specified in https://wiki.archlinux.org/index.php/Fstab.
How do I set the default boot device back to grub? There is some weirdness here, I think windows is using UEFI booting and my grub uses the old booting system.
Last edited by bjmnbraun (2014-05-14 19:00:36)

Rex: I tried that command, got some warning messages regarding blocklists, but no dice.
Loqs: You are right about windows using a ESP and UEFI while my linux is not booting using UEFI. My bios is configured to try "Legacy boot" first before trying UEFI. Getting linux to boot using UEFI seemed like a pain, so...
I went into my BIOS settings and found that the Windows Boot Manager boot device was listed in front of my hard disk (which boots linux). I don't think this used to be the case, so something about the update caused my BIOS to reorder the boot devices (probably because the partitions changed).
Switching my hard disk to be above the Windows Boot Manager in the boot device list now makes me boot into linux by default, and I can boot into windows by pressing a hotkey at bootup and selecting the windows boot manager.

[SOLVED] Some text not rendering in Gnome after update

After a recent update some text is not rendering in Gnome. For example, look at the url bar of chromium in this screenshot: http://i.imgur.com/A2Qyw.png
Here's a "screenshot" of some text not rendering in gnome-terminal:
$ echo -e "I like pizza\nI like pizza\nI like pizza"
...blank line...
...blank line...
...blank line...
...blank line...
It basically renders my desktop environment worthless. I don't see anything suspicious in /var/lob/Xorg.0.log. Here are some of the packages I've updated recently:
[2012-05-10 23:05] Running 'pacman -Suy'
[2012-05-10 23:05] synchronizing package lists
[2012-05-10 23:05] starting full system upgrade
[2012-05-10 23:06] upgraded pygobject-devel (3.2.0-2 -> 3.2.1-1)
[2012-05-10 23:06] upgraded python2-gobject (3.2.0-2 -> 3.2.1-1)
[2012-05-12 10:49] Running 'pacman -Suy'
[2012-05-12 10:49] synchronizing package lists
[2012-05-12 10:49] starting full system upgrade
[2012-05-12 10:55] upgraded cairo (1.10.2-3 -> 1.12.2-1)
[2012-05-12 10:55] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
[2012-05-12 10:55] upgraded git (1.7.10.1-1 -> 1.7.10.2-1)
[2012-05-12 10:55] upgraded java-jline (1.0-1 -> 1.0-2)
[2012-05-12 10:55] upgraded kmod (8-1 -> 8-2)
[2012-05-12 10:55] upgraded libpulse (1.1-4 -> 2.0-1)
[2012-05-12 10:55] upgraded libusb-compat (0.1.3-2 -> 0.1.4-1)
[2012-05-12 10:55] upgraded libxi (1.6.0-1 -> 1.6.1-1)
[2012-05-12 10:55] upgraded man-pages (3.39-1 -> 3.40-1)
[2012-05-12 10:55] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
[2012-05-12 10:55] installed webrtc-audio-processing (0.1-1)
[2012-05-12 10:55] upgraded pulseaudio (1.1-4 -> 2.0-1)
[2012-05-12 10:55] upgraded taglib (1.7.1-1 -> 1.7.2-1)
[2012-05-12 10:55] upgraded xorg-server-common (1.12.1-1 -> 1.12.1-2)
[2012-05-12 10:55] upgraded xorg-server (1.12.1-1 -> 1.12.1-2)
I'm not running [testing]. I don't know which of the two recent upgrades introduced the regression, but I'm guessing it was the one with all the xorg stuff...
Any ideas what's going on here? Thanks!
Last edited by mitch_feaster (2012-05-13 04:01:08)

Here's what I upgraded lately:
[2012-04-30 09:02] upgraded automake (1.11.5-1 -> 1.12-1)
[2012-04-30 09:02] upgraded libxfce4util (4.8.2-1 -> 4.10.0-1)
[2012-04-30 09:02] upgraded xfconf (4.8.1-1 -> 4.10.0-1)
[2012-04-30 09:02] upgraded libxfce4ui (4.8.1-1 -> 4.10.0-1)
[2012-04-30 09:02] upgraded exo (0.6.2-3 -> 0.8.0-1)
[2012-04-30 09:02] upgraded fuse (2.8.7-1 -> 2.9.0-1)
[2012-04-30 09:02] upgraded garcon (0.1.12-1 -> 0.2.0-1)
[2012-04-30 09:02] upgraded vim-runtime (7.3.495-2 -> 7.3.495-3)
[2012-04-30 09:02] upgraded gvim (7.3.495-2 -> 7.3.495-3)
[2012-04-30 09:02] upgraded libcanberra (0.28-2 -> 0.28-3)
[2012-04-30 09:02] upgraded libxfcegui4 (4.8.1-4 -> 4.10.0-1)
[2012-04-30 09:02] upgraded xfce4-panel (4.8.6-1 -> 4.10.0-1)
[2012-04-30 09:02] upgraded orage (4.8.3-1 -> 4.8.3-2)
[2012-04-30 09:02] upgraded terminal (0.4.8-1 -> 0.4.8-2)
[2012-04-30 09:02] upgraded thunar (1.2.3-5 -> 1.4.0-1)
[2012-04-30 09:02] upgraded thunar-media-tags-plugin (0.2.0-1 -> 0.2.0-2)
[2012-04-30 09:02] upgraded thunar-volman (0.6.1-1 -> 0.8.0-1)
[2012-04-30 09:03] upgraded ttf-dejavu (2.33-2 -> 2.33-3)
[2012-04-30 09:03] upgraded upower (0.9.15-1 -> 0.9.15-3)
[2012-04-30 09:03] upgraded xfburn (0.4.3-5 -> 0.4.3-6)
[2012-04-30 09:03] upgraded xfce4-appfinder (4.8.0-2 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfce4-session (4.8.3-1 -> 4.10.0-3)
[2012-04-30 09:03] upgraded xfce4-battery-plugin (1.0.1-1 -> 1.0.1-2)
[2012-04-30 09:03] upgraded xfce4-clipman-plugin (1.2.3-1 -> 1.2.3-2)
[2012-04-30 09:03] upgraded xfce4-cpufreq-plugin (1.0.0-2 -> 1.0.0-3)
[2012-04-30 09:03] upgraded xfce4-cpugraph-plugin (1.0.1-3 -> 1.0.2-1)
[2012-04-30 09:03] upgraded xfce4-datetime-plugin (0.6.1-2 -> 0.6.1-3)
[2012-04-30 09:03] upgraded xfce4-dev-tools (4.9.1-1 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfce4-dict (0.6.0-2 -> 0.6.0-3)
[2012-04-30 09:03] upgraded xfce4-diskperf-plugin (2.5.1-1 -> 2.5.2-1)
[2012-04-30 09:03] upgraded xfce4-eyes-plugin (4.4.1-2 -> 4.4.1-3)
[2012-04-30 09:03] upgraded xfce4-fsguard-plugin (1.0.0-2 -> 1.0.0-3)
[2012-04-30 09:03] upgraded xfce4-genmon-plugin (3.3.1-1 -> 3.3.1-2)
[2012-04-30 09:03] upgraded xfce4-mailwatch-plugin (1.1.0-4 -> 1.1.0-5)
[2012-04-30 09:03] upgraded xfce4-mixer (4.8.0-2 -> 4.8.0-3)
[2012-04-30 09:03] upgraded xfce4-mount-plugin (0.6.3-1 -> 0.6.3-2)
[2012-04-30 09:03] upgraded xfce4-mpc-plugin (0.4.0-1 -> 0.4.0-2)
[2012-04-30 09:03] upgraded xfce4-netload-plugin (1.1.0-1 -> 1.1.0-2)
[2012-04-30 09:03] upgraded xfce4-notes-plugin (1.7.7-3 -> 1.7.7-4)
[2012-04-30 09:03] upgraded xfce4-notifyd (0.2.2-2 -> 0.2.2-3)
[2012-04-30 09:03] upgraded xfce4-power-manager (1.0.11-2 -> 1.2.0-1)
[2012-04-30 09:03] upgraded xfce4-quicklauncher-plugin (1.9.4-6 -> 1.9.4-7)
[2012-04-30 09:03] upgraded xfce4-screenshooter (1.8.0-2 -> 1.8.0-3)
[2012-04-30 09:03] upgraded xfce4-sensors-plugin (1.2.3-4 -> 1.2.3-5)
[2012-04-30 09:03] upgraded xfce4-settings (4.8.3-2 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfce4-smartbookmark-plugin (0.4.4-1 -> 0.4.4-2)
[2012-04-30 09:03] upgraded xfce4-systemload-plugin (1.1.0-1 -> 1.1.0-2)
[2012-04-30 09:03] upgraded xfce4-timer-plugin (0.6.4-1 -> 0.6.4-2)
[2012-04-30 09:03] upgraded xfce4-verve-plugin (1.0.0-2 -> 1.0.0-3)
[2012-04-30 09:03] upgraded xfce4-wavelan-plugin (0.5.10-2 -> 0.5.10-3)
[2012-04-30 09:03] upgraded xfce4-weather-plugin (0.7.4-2 -> 0.7.4-3)
[2012-04-30 09:03] upgraded xfce4-xkb-plugin (0.5.4.3-1 -> 0.5.4.3-2)
[2012-04-30 09:03] upgraded xfdesktop (4.8.3-2 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfwm4 (4.8.3-1 -> 4.10.0-1)
[2012-04-30 09:03] upgraded xfwm4-themes (4.6.0-2 -> 4.10.0-1)
[2012-04-30 13:59] upgraded inetutils (1.9.1-1 -> 1.9.1-2)
[2012-04-30 13:59] upgraded libical (0.46-2 -> 0.48-1)
[2012-04-30 13:59] upgraded libusb (1.0.8-2 -> 1.0.9-1)
[2012-04-30 14:00] upgraded linux (3.3.3-1 -> 3.3.4-1)
[2012-04-30 14:00] upgraded mdadm (3.2.3-1 -> 3.2.3-2)
[2012-04-30 14:00] upgraded openssh (6.0p1-1 -> 6.0p1-2)
[2012-04-30 14:00] upgraded xfce4-artwork (0.1-7 -> 0.1.1a_git20110420-1)
[2012-04-30 14:00] upgraded xfce4-power-manager (1.2.0-1 -> 1.2.0-2)
[2012-05-01 10:42] upgraded chromium (18.0.1025.162-1 -> 18.0.1025.168-1)
[2012-05-01 10:42] upgraded imagemagick (6.7.6.5-1 -> 6.7.6.8-1)
[2012-05-01 10:42] upgraded libldap (2.4.30-1 -> 2.4.31-1)
[2012-05-01 10:42] upgraded upower (0.9.15-3 -> 0.9.16-1)
[2012-05-01 10:42] upgraded xfce4-battery-plugin (1.0.1-2 -> 1.0.2-1)
[2012-05-01 10:42] upgraded xfdesktop (4.10.0-1 -> 4.10.0-2)
[2012-05-02 20:01] upgraded bzip2 (1.0.6-3 -> 1.0.6-4)
[2012-05-02 20:01] upgraded dconf (0.12.0-1 -> 0.12.1-1)
[2012-05-02 20:01] upgraded e2fsprogs (1.42.2-1 -> 1.42.2-2)
[2012-05-02 20:01] upgraded syslog-ng (3.3.4-5 -> 3.3.5-1)
[2012-05-03 07:24] upgraded binutils (2.22-6 -> 2.22-7)
[2012-05-03 07:24] upgraded linux (3.3.4-1 -> 3.3.4-2)
[2012-05-03 07:24] upgraded xfce4-screenshooter (1.8.0-3 -> 1.8.1-1)
[2012-05-03 07:24] upgraded xfce4-settings (4.10.0-1 -> 4.10.0-2)
[2012-05-03 07:24] upgraded xfdesktop (4.10.0-2 -> 4.10.0-3)
[2012-05-03 18:21] upgraded libcanberra (0.28-3 -> 0.28-4)
[2012-05-03 18:21] upgraded mercurial (2.1.2-1 -> 2.2-1)
[2012-05-04 05:51] upgraded babl (0.1.6-1 -> 0.1.10-1)
[2012-05-04 05:51] upgraded gtk3 (3.4.1-1 -> 3.4.2-2)
[2012-05-04 05:52] upgraded ttf-freefont (20100919-2 -> 20120503-1)
[2012-05-04 20:58] upgraded nss (3.13.4-1 -> 3.13.4-2)
[2012-05-04 20:58] upgraded flashplugin (11.2.202.233-1 -> 11.2.202.235-1)
[2012-05-04 20:58] upgraded xfce4-artwork (0.1.1a_git20110420-1 -> 0.1.1a_git20110420-2)
[2012-05-05 10:57] upgraded attr (2.4.46-1 -> 2.4.46-2)
[2012-05-05 10:57] upgraded acl (2.2.51-1 -> 2.2.51-2)
[2012-05-05 10:57] upgraded zlib (1.2.6-1 -> 1.2.7-1)
[2012-05-05 10:57] upgraded consolekit (0.4.6-2 -> 0.4.6-3)
[2012-05-05 10:57] upgraded udev (182-1 -> 182-2)
[2012-05-05 10:57] upgraded device-mapper (2.02.95-2 -> 2.02.95-4)
[2012-05-05 10:57] upgraded filesystem (2012.2-4 -> 2012.2-5)
[2012-05-05 10:57] upgraded gegl (0.1.8-2 -> 0.2.0-1)
[2012-05-05 10:57] upgraded gimp (2.6.12-1 -> 2.8.0-1)
[2012-05-05 10:57] upgraded gnome-keyring (3.4.1-1 -> 3.4.1-2)
[2012-05-05 10:57] upgraded initscripts (2012.03.2-1 -> 2012.04.1-1)
[2012-05-05 10:57] upgraded libcap (2.22-2 -> 2.22-3)
[2012-05-05 10:57] upgraded libjpeg-turbo (1.2.0-1 -> 1.2.0-2)
[2012-05-05 10:57] upgraded libwbclient (3.6.4-2 -> 3.6.5-1)
[2012-05-05 10:57] upgraded linux-firmware (20120227-1 -> 20120227-2)
[2012-05-05 10:57] upgraded lvm2 (2.02.95-2 -> 2.02.95-4)
[2012-05-05 10:57] upgraded mdadm (3.2.3-2 -> 3.2.3-3)
[2012-05-05 10:57] upgraded mercurial (2.2-1 -> 2.2.1-1)
[2012-05-05 10:57] upgraded mkinitcpio (0.8.7-2 -> 0.8.8-1)
[2012-05-05 10:57] upgraded pam (1.1.5-2 -> 1.1.5-3)
[2012-05-05 10:57] upgraded smbclient (3.6.4-2 -> 3.6.5-1)
[2012-05-05 10:57] upgraded sysfsutils (2.1.0-7 -> 2.1.0-8)
[2012-05-05 10:57] upgraded usbmuxd (1.0.7-2 -> 1.0.7-3)
[2012-05-05 10:57] upgraded v4l-utils (0.8.6-1 -> 0.8.8-1)
[2012-05-05 10:57] upgraded xfsprogs (3.1.8-1 -> 3.1.8-2)
[2012-05-06 10:05] upgraded initscripts (2012.04.1-1 -> 2012.05.1-1)
[2012-05-06 10:05] upgraded unrar (4.1.4-2 -> 4.2.1-1)
[2012-05-06 19:49] upgraded bash (4.2.024-2 -> 4.2.028-1)
[2012-05-07 07:37] upgraded pygobject2-devel (2.28.6-5 -> 2.28.6-6)
[2012-05-07 07:37] upgraded python2-gobject2 (2.28.6-5 -> 2.28.6-6)
[2012-05-07 07:38] upgraded texlive-bin (2011.3-5 -> 2011.3-6)
[2012-05-08 07:36] upgraded libpurple (2.10.3-2 -> 2.10.4-1)
[2012-05-08 07:36] upgraded pidgin (2.10.3-2 -> 2.10.4-1)
[2012-05-08 19:03] upgraded cifs-utils (5.3-2 -> 5.4-1)
[2012-05-08 19:04] upgraded libmysqlclient (5.5.23-1 -> 5.5.24-1)
[2012-05-08 19:04] upgraded ntfs-3g (2012.1.15-2 -> 2012.1.15-3)
[2012-05-08 21:05] upgraded me-tv (1:1.3.6-1 -> 1:1.4.0.9-1)
[2012-05-09 06:36] upgraded gcc-libs (4.7.0-5 -> 4.7.0-6)
[2012-05-09 06:36] upgraded gcc (4.7.0-5 -> 4.7.0-6)
[2012-05-09 06:36] upgraded gmp (5.0.4-1 -> 5.0.5-1)
[2012-05-09 06:36] upgraded isl (0.09-1 -> 0.09-2)
[2012-05-09 20:05] upgraded chromium (18.0.1025.168-1 -> 18.0.1025.168-2)
[2012-05-09 20:05] upgraded glib2 (2.32.1-3 -> 2.32.2-2)
[2012-05-09 20:05] upgraded linux (3.3.4-2 -> 3.3.5-1)
[2012-05-09 20:05] upgraded qtcreator (2.4.1-1 -> 2.5.0-1)
[2012-05-10 06:28] upgraded libcups (1.5.2-1 -> 1.5.2-2)
[2012-05-10 06:28] upgraded cups (1.5.2-1 -> 1.5.2-2)
[2012-05-10 06:28] upgraded ffmpeg (20120317-1 -> 20120509-1)
[2012-05-12 09:12] upgraded libpulse (1.1-4 -> 2.0-1)
[2012-05-12 09:12] upgraded libusb-compat (0.1.3-2 -> 0.1.4-1)
[2012-05-12 09:12] upgraded mpfr (3.1.0.p7-1 -> 3.1.0.p10-1)
[2012-05-12 09:12] upgraded openssl (1.0.1.b-1 -> 1.0.1.c-1)
[2012-05-12 17:02] upgraded cairo (1.10.2-3 -> 1.12.2-1)
[2012-05-12 17:02] upgraded kmod (8-1 -> 8-2)
[2012-05-12 17:02] upgraded man-pages (3.39-1 -> 3.40-1)
[2012-05-12 17:02] upgraded taglib (1.7.1-1 -> 1.7.2-1)
[2012-05-12 17:02] upgraded xorg-server-common (1.12.1-1 -> 1.12.1-2)
[2012-05-12 17:02] upgraded xorg-server (1.12.1-1 -> 1.12.1-2)
[2012-05-12 20:52] upgraded libxi (1.6.0-1 -> 1.6.1-1)
[2012-05-12 20:52] upgraded xfce4-genmon-plugin (3.3.1-2 -> 3.4.0-1)
[2012-05-12 22:28] upgraded libvpx (1.0.0-1 -> 1.1.0-1)
[2012-05-13 08:33] upgraded gtk3 (3.4.2-2 -> 3.4.3-1)
[2012-05-13 08:37] upgraded libxi (1.6.1-1 -> 1.6.0-1)
[2012-05-13 08:40] upgraded libxi (1.6.0-1 -> 1.6.1-1)
[2012-05-13 09:40] upgraded cairo (1.12.2-1 -> 1.10.2-3)
I suspected libxi first but a downgrade did not resolve the problem. So you may very well be correct by connecting this to the xserver. I'm using nouveau by the way.

[Solved] No sound on my arch workstation (after update)

Similar Messages

Maybe you are looking for