[solved] No sound with ALC269VB on asus 1215b EeePC

Hello,
I've just finished the basic install on a Asus Eee PC 1215B (with an APU C-50) and I'm having problems to make the sound work. I've googled around without succes...
# aplay -l
**** List of PLAYBACK Hardware Devices ****
card 0: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
Subdevices: 1/1
Subdevice #0: subdevice #0
card 1: SB [HDA ATI SB], device 0: ALC269VB Analog [ALC269VB Analog]
Subdevices: 1/1
Subdevice #0: subdevice #0
# cat /proc/asound/card1/pcm0p/info
card: 1
device: 0
subdevice: 0
stream: PLAYBACK
id: ALC269VB Analog
name: ALC269VB Analog
subname: subdevice #0
class: 0
subclass: 0
subdevices_count: 1
subdevices_avail: 1
# cat /etc/modprobe.d/modprobe.conf
blacklist radeon
option snd-hda-intel mode=auto
I've runned alsaconf and rebooted several times and nothing helped...
When I run alsamixer, the default chip that appears is ATI R6xx HDMI, with only S/PDIF channel, when I change card to HDA ATI SB (chip Realtek ALC269VB) it appears the usual channels the change volume. Only mic is muted, the I run speaker-test:
# speaker-test -c 1
speaker-test 1.0.24.2
Playback device is default
Stream parameters are 48000Hz, S16_LE, 1 channels
Using 16 octaves of pink noise
ALSA lib pcm_dmix.c:1018:(snd_pcm_dmix_open) unable to open slave
Playback open error: -2,No such file or directory
I dont have ideas to solve this...
Could someone help me??
Gratefull,
Heitor.
Last edited by heitorpb (2012-01-22 20:00:19)

New try. Check IDs with:
cat /proc/asound/card0/id
cat /proc/asound/card1/id
Then do something like
options snd-hda-intel id=SB,HDMI index=0,1
using the IDs you got with the commands above.
As for .asoundrc, I've seen one recently, but can't remember where. Edit - Found it:
pcm.!default {
type hw
card SB
ctl.!default {
type hw
card SB
However this will only play one sound at a time. Check here if you want to play around with this stuff: http://alsa.opensrc.org/FAQ026. Hopefully you won't need to.
Last edited by Gusar (2012-01-22 20:02:39)

Similar Messages

  • [SOLVED]No Sound with ALSA - Intel Corporation 82801G HD Audio

    Hey all,
    I've succesfully installed Arch Linux. My past two attempts have met with failure, all because of my own failure to read and follow directions correctly. This time everything is installed correctly. I am running Kdemod3 on my laptop with Arch and everything works great. I LOVE Pacman and the simplicity of Arch's configuration files. It's super fast and all together simple. My only remaining problem is this:
    My sound with ALSA is not functioning. I followed the installation instructions at the arch wiki and after unmuting all of my channels I still would not get any sound. My sound module is snd_hda_intel and it is detected, loaded and the whole nine yards (as far as I can tell). My user is a member of the 'audio' user group also. I looked at the troubleshooting tips on the bottom of the Wiki but decided not to try them as they do not seem to pertain to my card (snd_hda_intel) but I will try them if anyone would like me to.
    If anyone has any ideas, they'd be greatly appreciated!:D Anything I can provide that you need I will be more than willing to provide.
    Thanks for such a great distribution,
    Dan
    Last edited by JazzDan (2008-06-29 05:06:35)

    Problem resolved. I ran alsaconf, selected my soundcard, and everything was working from there out. Thanks MisfitI38 on the IRC!!!

  • [SOLVED] No sound with vmware

    I'm getting no sound with vmware, not sure why
    Here's what I've been trying to test things:
    $ cat /dev/urandom | aplay
    Playing raw data 'stdin' : Unsigned 8 bit, Rate 8000 Hz, Mono
    Here's some alsa info, if it helps:
    $ aplay -L
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=AudioPCI
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    Default Audio Device
    sysdefault:CARD=AudioPCI
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    Default Audio Device
    front:CARD=AudioPCI,DEV=0
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    Front speakers
    rear:CARD=AudioPCI,DEV=0
    Ensoniq AudioPCI, ES1371 DAC1
    Rear speakers
    surround40:CARD=AudioPCI,DEV=0
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    4.0 Surround output to Front and Rear speakers
    iec958:CARD=AudioPCI,DEV=0
    Ensoniq AudioPCI, ES1371 DAC2/ADC
    IEC958 (S/PDIF) Digital Audio Output
    Last edited by specular (2014-08-27 19:52:45)

    Don't think I was clear enough, but arch is installed as a vmware guest. Below is the requested output from the alsa-info script:
    upload=true&script=true&cardinfo=
    !!ALSA Information Script v 0.4.63
    !!Script ran on: Wed Aug 27 18:29:05 UTC 2014
    !!Linux Distribution
    NAME="Arch Linux" ID=arch PRETTY_NAME="Arch Linux" HOME_URL="https://www.archlinux.org/" SUPPORT_URL="https://bbs.archlinux.org/" BUG_REPORT_URL="https://bugs.archlinux.org/"
    !!DMI Information
    Manufacturer: VMware, Inc.
    Product Name: VMware7,1
    Product Version: None
    Firmware Version: VMW71.00V.0.B64.1310020058
    !!Kernel Information
    Kernel release: 3.14.2-1-ARCH
    Operating System: GNU/Linux
    Architecture: x86_64
    Processor: unknown
    SMP Enabled: Yes
    !!ALSA Version
    Driver version: k3.14.2-1-ARCH
    Library version: 1.0.27.2
    Utilities version: 1.0.28
    !!Loaded ALSA modules
    snd_ens1371
    !!Sound Servers on this system
    No sound servers found.
    !!Soundcards recognised by ALSA
    0 [AudioPCI ]: ENS1371 - Ensoniq AudioPCI
    Ensoniq AudioPCI ENS1371 at 0x1000, irq 19
    !!PCI Soundcards installed in the system
    02:01.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 02)
    !!Advanced information - PCI Vendor/Device/Subsystem ID's
    02:01.0 0401: 1274:1371 (rev 02)
    Subsystem: 1274:1371
    !!Loaded sound module options
    !!Module: snd_ens1371
    enable : Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y
    id : (null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)
    index : -1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1
    joystick_port : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    lineio : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    spdif : 0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0
    !!AC97 Codec information
    --startcollapse--
    0-0/0: Cirrus Logic CS4297A rev 3
    PCI Subsys Vendor: 0x1274
    PCI Subsys Device: 0x1371
    Flags: 4
    Capabilities :
    DAC resolution : 16-bit
    ADC resolution : 16-bit
    3D enhancement : No 3D Stereo Enhancement
    Current setup
    Mic gain : +0dB [+0dB]
    POP path : pre 3D
    Sim. stereo : off
    3D enhancement : off
    Loudness : off
    Mono output : MIX
    Mic select : Mic1
    ADC/DAC loopback : off
    0:00 = 0000
    0:02 = 0e8e
    0:04 = 0000
    0:06 = 0000
    0:08 = 0000
    0:0a = 0000
    0:0c = bfbf
    0:0e = bfbf
    0:10 = bfbf
    0:12 = bfbf
    0:14 = bfbf
    0:16 = bfbf
    0:18 = 28a8
    0:1a = 0000
    0:1c = 0808
    0:1e = 0000
    0:20 = 0000
    0:22 = 0000
    0:24 = 0000
    0:26 = 000f
    0:28 = 0000
    0:2a = 0000
    0:2c = 0000
    0:2e = 0000
    0:30 = 0000
    0:32 = 0000
    0:34 = 0000
    0:36 = 0000
    0:38 = 0000
    0:3a = 0000
    0:3c = 0000
    0:3e = 0000
    0:40 = 0000
    0:42 = 0000
    0:44 = 0000
    0:46 = 0000
    0:48 = 0000
    0:4a = 0000
    0:4c = 0000
    0:4e = 0000
    0:50 = 0000
    0:52 = 0000
    0:54 = 0000
    0:56 = 0000
    0:58 = 0000
    0:5a = 0000
    0:5c = 0000
    0:5e = 0000
    0:60 = 0000
    0:62 = 0000
    0:64 = 0000
    0:66 = 0000
    0:68 = 0000
    0:6a = 0000
    0:6c = 0000
    0:6e = 0000
    0:70 = 0000
    0:72 = 0000
    0:74 = 0000
    0:76 = 0000
    0:78 = 0000
    0:7a = 0000
    0:7c = 4352
    0:7e = 5913
    --endcollapse--
    !!ALSA Device nodes
    crw-rw----+ 1 root audio 116, 6 Aug 28 01:35 /dev/snd/controlC0
    crw-rw----+ 1 root audio 116, 2 Aug 28 01:35 /dev/snd/midiC0D0
    crw-rw----+ 1 root audio 116, 5 Aug 28 01:35 /dev/snd/pcmC0D0c
    crw-rw----+ 1 root audio 116, 4 Aug 28 03:28 /dev/snd/pcmC0D0p
    crw-rw----+ 1 root audio 116, 3 Aug 28 01:35 /dev/snd/pcmC0D1p
    crw-rw----+ 1 root audio 116, 1 Aug 28 01:35 /dev/snd/seq
    crw-rw----+ 1 root audio 116, 33 Aug 28 01:35 /dev/snd/timer
    /dev/snd/by-path:
    total 0
    drwxr-xr-x 2 root root 60 Aug 28 01:35 .
    drwxr-xr-x 3 root root 200 Aug 28 01:35 ..
    lrwxrwxrwx 1 root root 12 Aug 28 01:35 pci-0000:02:01.0 -> ../controlC0
    !!Aplay/Arecord output
    APLAY
    **** List of PLAYBACK Hardware Devices ****
    card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: AudioPCI [Ensoniq AudioPCI], device 1: ES1371/2 [ES1371 DAC1]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ARECORD
    **** List of CAPTURE Hardware Devices ****
    card 0: AudioPCI [Ensoniq AudioPCI], device 0: ES1371/1 [ES1371 DAC2/ADC]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    !!Amixer output
    !!-------Mixer controls for card 0 [AudioPCI]
    Card hw:0 'AudioPCI'/'Ensoniq AudioPCI ENS1371 at 0x1000, irq 19'
    Mixer name : 'Cirrus Logic CS4297A rev 3'
    Components : 'AC97a:43525913'
    Controls : 26
    Simple ctrls : 13
    Simple mixer control 'Master',0
    Capabilities: pvolume pswitch pswitch-joined
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Mono:
    Front Left: Playback 49 [78%] [-21.00dB] [on]
    Front Right: Playback 49 [78%] [-21.00dB] [on]
    Simple mixer control 'PCM',0
    Capabilities: pvolume pswitch pswitch-joined
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Mono:
    Front Left: Playback 23 [37%] [0.00dB] [on]
    Front Right: Playback 23 [37%] [0.00dB] [on]
    Simple mixer control 'Line',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'CD',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [on]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [on]
    Simple mixer control 'Mic Boost (+20dB)',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'Video',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'Phone',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    Simple mixer control 'Aux',0
    Capabilities: pvolume pswitch pswitch-joined cswitch cswitch-exclusive
    Capture exclusive group: 0
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: Playback 0 - 63
    Front Left: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Front Right: Playback 0 [0%] [-34.50dB] [off] Capture [off]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch cswitch-joined
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 15
    Front Left: Capture 8 [53%] [12.00dB] [on]
    Front Right: Capture 8 [53%] [12.00dB] [on]
    Simple mixer control 'Mix',0
    Capabilities: cswitch cswitch-exclusive
    Capture exclusive group: 0
    Capture channels: Front Left - Front Right
    Front Left: Capture [off]
    Front Right: Capture [off]
    Simple mixer control 'Mix Mono',0
    Capabilities: cswitch cswitch-exclusive
    Capture exclusive group: 0
    Capture channels: Front Left - Front Right
    Front Left: Capture [off]
    Front Right: Capture [off]
    !!Alsactl output
    --startcollapse--
    state.AudioPCI {
    control.1 {
    iface MIXER
    name 'Master Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.2 {
    iface MIXER
    name 'Master Playback Volume'
    value.0 49
    value.1 49
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -9450
    dbmax 0
    dbvalue.0 -2100
    dbvalue.1 -2100
    control.3 {
    iface MIXER
    name 'Phone Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.4 {
    iface MIXER
    name 'Phone Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.5 {
    iface MIXER
    name 'Mic Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.6 {
    iface MIXER
    name 'Mic Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.7 {
    iface MIXER
    name 'Mic Boost (+20dB)'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.8 {
    iface MIXER
    name 'Line Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.9 {
    iface MIXER
    name 'Line Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.10 {
    iface MIXER
    name 'CD Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.11 {
    iface MIXER
    name 'CD Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.12 {
    iface MIXER
    name 'Video Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.13 {
    iface MIXER
    name 'Video Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.14 {
    iface MIXER
    name 'Aux Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.15 {
    iface MIXER
    name 'Aux Playback Volume'
    value.0 0
    value.1 0
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 -3450
    dbvalue.1 -3450
    control.16 {
    iface MIXER
    name 'PCM Playback Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.17 {
    iface MIXER
    name 'PCM Playback Volume'
    value.0 23
    value.1 23
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 63'
    dbmin -3450
    dbmax 6000
    dbvalue.0 0
    dbvalue.1 0
    control.18 {
    iface MIXER
    name 'Capture Source'
    value.0 Mic
    value.1 Mic
    comment {
    access 'read write'
    type ENUMERATED
    count 2
    item.0 Mic
    item.1 CD
    item.2 Video
    item.3 Aux
    item.4 Line
    item.5 Mix
    item.6 'Mix Mono'
    item.7 Phone
    control.19 {
    iface MIXER
    name 'Capture Switch'
    value true
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.20 {
    iface MIXER
    name 'Capture Volume'
    value.0 8
    value.1 8
    comment {
    access 'read write'
    type INTEGER
    count 2
    range '0 - 15'
    dbmin 0
    dbmax 2250
    dbvalue.0 1200
    dbvalue.1 1200
    control.21 {
    iface MIXER
    name 'IEC958 Playback Con Mask'
    value '0fff000f00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access read
    type IEC958
    count 1
    control.22 {
    iface MIXER
    name 'IEC958 Playback Pro Mask'
    value cf00000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000
    comment {
    access read
    type IEC958
    count 1
    control.23 {
    iface MIXER
    name 'IEC958 Playback Default'
    value '0082000200000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000000'
    comment {
    access 'read write'
    type IEC958
    count 1
    control.24 {
    iface MIXER
    name 'IEC958 Playback Switch'
    value false
    comment {
    access 'read write'
    type BOOLEAN
    count 1
    control.25 {
    iface PCM
    name 'Playback Channel Map'
    value.0 0
    value.1 0
    comment {
    access read
    type INTEGER
    count 2
    range '0 - 36'
    control.26 {
    iface PCM
    device 1
    name 'Playback Channel Map'
    value.0 0
    value.1 0
    comment {
    access read
    type INTEGER
    count 2
    range '0 - 36'
    --endcollapse--
    !!All Loaded Modules
    Module
    fuse
    vmw_vsock_vmci_transport
    vsock
    nls_iso8859_1
    nls_cp437
    vfat
    fat
    coretemp
    hwmon
    joydev
    snd_ens1371
    mousedev
    snd_ac97_codec
    hid_generic
    ac97_bus
    gameport
    snd_rawmidi
    snd_seq_device
    snd_pcm
    snd_timer
    snd
    crct10dif_pclmul
    crc32_pclmul
    crc32c_intel
    ghash_clmulni_intel
    soundcore
    usbhid
    aesni_intel
    aes_x86_64
    lrw
    gf128mul
    glue_helper
    hid
    psmouse
    vmwgfx
    ppdev
    ablk_helper
    cryptd
    evdev
    vmxnet3
    mac_hid
    pcspkr
    vmw_balloon
    i2c_piix4
    serio_raw
    ttm
    microcode
    drm
    processor
    i2c_core
    intel_agp
    intel_gtt
    vmw_vmci
    parport_pc
    parport
    battery
    shpchp
    ac
    button
    ext4
    crc16
    mbcache
    jbd2
    dm_mod
    sd_mod
    crc_t10dif
    crct10dif_common
    sr_mod
    cdrom
    ata_generic
    pata_acpi
    atkbd
    libps2
    ata_piix
    libata
    mptsas
    scsi_transport_sas
    mptscsih
    uhci_hcd
    ehci_pci
    scsi_mod
    ehci_hcd
    usbcore
    mptbase
    usb_common
    floppy
    i8042
    serio
    !!ALSA/HDA dmesg
    [ 5.342713] mousedev: PS/2 mouse device common for all mice
    [ 5.345140] snd_ens1371 0000:02:01.0: enabling device (0000 -> 0001)
    [ 5.391722] intel_rapl: domain package energy ctr 0:0 not working, skip
    Last edited by specular (2014-08-27 18:45:55)

  • [SOLVED] No sound (with flash)

    Hello.
    I have no sound with flash. It does work elsewhere.
    I am using ALSA.
    My flash should output audio correctly according to wiki: https://wiki.archlinux.org/index.php/Fl … d_in_Flash
    # aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC889 Analog [ALC889 Analog]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 1: ALC889 Digital [ALC889 Digital]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
      Subdevices: 1/1
      Subdevice #0: subdevice #0
    EDIT: I'm retarded. I didn't add my user to audio group. And sound elsewhere was from speaker-test which needs SU.
    Last edited by handl3r (2012-01-22 07:39:34)

    codemac wrote:
    Orrrr it's because the flash plugin uses OSS.
    run `aoss firefox` and be happy.
    OSS does still work or at least the alsa backwards compatibility layer that emulates the old interfaces, right? did i miss anything?
    for newer versions of flash (like version 9) simply install firefox in wine and let it install the plugin. that usually works great!

  • [SOLVED] No sound with Asus Xonar DGX

    I've got no sound so I've looked into journalctl and there were some bluez and pulseaudio related erros. So i.a.w. this topic https://bbs.archlinux.org/viewtopic.php?id=155714 I did `systemctl enable bluetooth.service`. No more errors but still no sound.
    Other things I did:
    - unplug/plug headphones
    - check whether anything is muted in alsamixer and the gnome sound applet (note: nothing is greyed-out, microphone picks up signals)
    snd_oxygen i.e. ASUS XONAR is the sound card I would like to use and I hook my headphones to.
    # cat /proc/asound/cards
    0 [DGX ]: CMI8786 - Xonar DGX
    C-Media Oxygen HD Audio at 0xee00, irq 17
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfd7fc000 irq 30
    # lsmod | grep '^snd' | column -t
    snd_hda_codec_hdmi 49263 1
    snd_hda_intel 26387 2
    snd_hda_controller 26857 1 snd_hda_intel
    snd_oxygen 23783 2
    snd_hda_codec 112621 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_controller
    snd_oxygen_lib 36709 1 snd_oxygen
    snd_hwdep 17244 1 snd_hda_codec
    snd_mpu401_uart 13507 1 snd_oxygen_lib
    snd_rawmidi 26806 1 snd_mpu401_uart
    snd_seq_device 13307 1 snd_rawmidi
    snd_pcm 88779 5 snd_hda_codec_hdmi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 73436 19 snd_oxygen,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_oxygen_lib,snd_hda_codec,snd_hda_intel,snd_mpu401_uart,snd_seq_device
    # journalctl -b | grep -i bluez
    Apr 26 12:13:52 arch1411 dbus[326]: [system] Activating via systemd: service name='org.bluez' unit='dbus-org.bluez.service'
    Apr 26 12:13:52 arch1411 dbus[326]: [system] Successfully activated service 'org.bluez'
    Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Activating service name='org.bluez.obex'
    Apr 26 12:14:31 arch1411 /usr/lib/gdm/gdm-x-session[359]: Successfully activated service 'org.bluez.obex'
    [root@arch1411 hg1]# journalctl -b | grep -i audio
    Apr 26 12:13:50 arch1411 kernel: snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 431 of process 431 (/usr/bin/pulseaudio) owned by '1000' high priority at nice level -11.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 456 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 497 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 12:13:52 arch1411 rtkit-daemon[432]: Successfully made thread 498 of process 431 (/usr/bin/pulseaudio) owned by '1000' RT at priority 5.
    Apr 26 15:37:00 arch1411 vlc.desktop[876]: [00007ffabc009ee8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
    Apr 26 15:37:02 arch1411 vlc.desktop[876]: [00007ffae0c244f8] mpgatofixed32 audio converter error: libmad error: bad main_data_begin pointer
    # systemctl status pulseaudio.service
    ● pulseaudio.service
    Loaded: not-found (Reason: No such file or directory)
    Active: inactive (dead)
    # systemctl start pulseaudio.service
    Failed to start pulseaudio.service: Unit pulseaudio.service failed to load: No such file or directory.
    Should I proceed per https://bbs.archlinux.org/viewtopic.php?id=149501 and remove pulseaudio daemon from the /etc/rc.conf file?
    Last edited by bbarcher (2015-05-01 07:42:36)

    systemctl --all --no-pager|grep -i pulse
    returns nothing.
    Thank you for your input, V1del.
    $ pacmd list-cards
    2 card(s) available.
    index: 0
    name: <alsa_card.pci-0000_01_00.1>
    driver: <module-alsa-card.c>
    owner module: 6
    properties:
    alsa.card = "0"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aa88"
    device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
    device.string = "0"
    device.description = "Barts HDMI Audio [Radeon HD 6800 Series]"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    output:hdmi-stereo: Digital Stereo (HDMI) Output (priority 5400, available: unknown)
    output:hdmi-surround: Digital Surround 5.1 (HDMI) Output (priority 300, available: unknown)
    output:hdmi-surround71: Digital Surround 7.1 (HDMI) Output (priority 300, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: <output:hdmi-stereo>
    sinks:
    alsa_output.pci-0000_01_00.1.hdmi-stereo/#0: Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
    sources:
    alsa_output.pci-0000_01_00.1.hdmi-stereo.monitor/#0: Monitor of Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = "video-display"
    index: 1
    name: <alsa_card.pci-0000_04_04.0>
    driver: <module-alsa-card.c>
    owner module: 24
    properties:
    alsa.card = "1"
    alsa.card_name = "Xonar DGX"
    alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
    alsa.driver_name = "snd_oxygen"
    device.bus_path = "pci-0000:04:04.0"
    sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "13f6"
    device.vendor.name = "C-Media Electronics Inc"
    device.product.id = "8788"
    device.product.name = "CMI8788 [Oxygen HD Audio]"
    device.string = "1"
    device.description = "CMI8788 [Oxygen HD Audio]"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    profiles:
    input:analog-stereo: Analog Stereo Input (priority 60, available: unknown)
    output:analog-stereo: Analog Stereo Output (priority 6000, available: unknown)
    output:analog-stereo+input:analog-stereo: Analog Stereo Duplex (priority 6060, available: unknown)
    off: Off (priority 0, available: unknown)
    active profile: <output:analog-stereo+input:analog-stereo>
    sinks:
    alsa_output.pci-0000_04_04.0.analog-stereo/#1: CMI8788 [Oxygen HD Audio] Analog Stereo
    sources:
    alsa_output.pci-0000_04_04.0.analog-stereo.monitor/#1: Monitor of CMI8788 [Oxygen HD Audio] Analog Stereo
    alsa_input.pci-0000_04_04.0.analog-stereo/#2: CMI8788 [Oxygen HD Audio] Analog Stereo
    ports:
    analog-input-front-mic: Front Microphone (priority 8500, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-input-microphone"
    analog-input-mic: Microphone (priority 8700, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-input-microphone"
    analog-input-linein: Line In (priority 8100, latency offset 0 usec, available: unknown)
    properties:
    analog-input-aux: Analog Input (priority 8000, latency offset 0 usec, available: unknown)
    properties:
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-headphones"
    $ pacmd list-sinks
    2 sink(s) available.
    index: 0
    name: <alsa_output.pci-0000_01_00.1.hdmi-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9050
    volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 0
    sample spec: s16le 2ch 44100Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1999.82 ms
    card: 0 <alsa_card.pci-0000_01_00.1>
    module: 6
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "HDMI 0"
    alsa.id = "HDMI 0"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "3"
    alsa.card = "0"
    alsa.card_name = "HDA ATI HDMI"
    alsa.long_card_name = "HDA ATI HDMI at 0xfd7fc000 irq 30"
    alsa.driver_name = "snd_hda_intel"
    device.bus_path = "pci-0000:01:00.1"
    sysfs.path = "/devices/pci0000:00/0000:00:02.0/0000:01:00.1/sound/card0"
    device.bus = "pci"
    device.vendor.id = "1002"
    device.vendor.name = "Advanced Micro Devices, Inc. [AMD/ATI]"
    device.product.id = "aa88"
    device.product.name = "Barts HDMI Audio [Radeon HD 6800 Series]"
    device.string = "hdmi:0"
    device.buffering.buffer_size = "352768"
    device.buffering.fragment_size = "176384"
    device.access_mode = "mmap+timer"
    device.profile.name = "hdmi-stereo"
    device.profile.description = "Digital Stereo (HDMI)"
    device.description = "Barts HDMI Audio [Radeon HD 6800 Series] Digital Stereo (HDMI)"
    alsa.mixer_name = "ATI R6xx HDMI"
    alsa.components = "HDA:1002aa01,00aa0100,00100200"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    hdmi-output-0: HDMI / DisplayPort (priority 5900, latency offset 0 usec, available: no)
    properties:
    device.icon_name = "video-display"
    active port: <hdmi-output-0>
    * index: 1
    name: <alsa_output.pci-0000_04_04.0.analog-stereo>
    driver: <module-alsa-card.c>
    flags: HARDWARE HW_MUTE_CTRL HW_VOLUME_CTRL DECIBEL_VOLUME LATENCY FLAT_VOLUME DYNAMIC_LATENCY
    state: SUSPENDED
    suspend cause: IDLE
    priority: 9059
    volume: front-left: 65536 / 100% / 0.00 dB, front-right: 65536 / 100% / 0.00 dB
    balance 0.00
    base volume: 65536 / 100% / 0.00 dB
    volume steps: 65537
    muted: no
    current latency: 0.00 ms
    max request: 0 KiB
    max rewind: 0 KiB
    monitor source: 1
    sample spec: s16le 2ch 48000Hz
    channel map: front-left,front-right
    Stereo
    used by: 0
    linked by: 0
    configured latency: 0.00 ms; range is 0.50 .. 1837.50 ms
    card: 1 <alsa_card.pci-0000_04_04.0>
    module: 24
    properties:
    alsa.resolution_bits = "16"
    device.api = "alsa"
    device.class = "sound"
    alsa.class = "generic"
    alsa.subclass = "generic-mix"
    alsa.name = "Multichannel"
    alsa.id = "Multichannel"
    alsa.subdevice = "0"
    alsa.subdevice_name = "subdevice #0"
    alsa.device = "0"
    alsa.card = "1"
    alsa.card_name = "Xonar DGX"
    alsa.long_card_name = "C-Media Oxygen HD Audio at 0xee00, irq 17"
    alsa.driver_name = "snd_oxygen"
    device.bus_path = "pci-0000:04:04.0"
    sysfs.path = "/devices/pci0000:00/0000:00:05.0/0000:03:00.0/0000:04:04.0/sound/card1"
    device.bus = "pci"
    device.vendor.id = "13f6"
    device.vendor.name = "C-Media Electronics Inc"
    device.product.id = "8788"
    device.product.name = "CMI8788 [Oxygen HD Audio]"
    device.string = "hw:1"
    device.buffering.buffer_size = "352800"
    device.buffering.fragment_size = "352800"
    device.access_mode = "mmap+timer"
    device.profile.name = "analog-stereo"
    device.profile.description = "Analog Stereo"
    device.description = "CMI8788 [Oxygen HD Audio] Analog Stereo"
    alsa.mixer_name = "CMI8786"
    alsa.components = "CS4245 CMI8786"
    module-udev-detect.discovered = "1"
    device.icon_name = "audio-card-pci"
    ports:
    analog-output-headphones: Headphones (priority 9000, latency offset 0 usec, available: unknown)
    properties:
    device.icon_name = "audio-headphones"
    active port: <analog-output-headphones>
    After all of the recommended solutions from the wiki I still get
    $ systemctl status pulseaudio.service
    ● pulseaudio.service
    Loaded: not-found (Reason: No such file or directory)
    Active: inactive (dead)
    $ pulseaudio -vvvv
    I: [pulseaudio] main.c: setrlimit(RLIMIT_NICE, (31, 31)) failed: Operation not permitted
    I: [pulseaudio] main.c: setrlimit(RLIMIT_RTPRIO, (9, 9)) failed: Operation not permitted
    D: [pulseaudio] core-rtclock.c: Timer slack is set to 50 us.
    D: [pulseaudio] core-util.c: RealtimeKit worked.
    I: [pulseaudio] core-util.c: Successfully gained nice level -11.
    I: [pulseaudio] main.c: This is PulseAudio 6.0
    D: [pulseaudio] main.c: Compilation host: x86_64-unknown-linux-gnu
    D: [pulseaudio] main.c: Compilation CFLAGS: -march=x86-64 -mtune=generic -O2 -pipe -fstack-protector-strong --param=ssp-buffer-size=4 -Wall -W -Wextra -Wno-long-long -Wno-overlength-strings -Wunsafe-loop-optimizations -Wundef -Wformat=2 -Wlogical-op -Wsign-compare -Wformat-security -Wmissing-include-dirs -Wformat-nonliteral -Wpointer-arith -Winit-self -Wdeclaration-after-statement -Wfloat-equal -Wmissing-prototypes -Wredundant-decls -Wmissing-declarations -Wmissing-noreturn -Wshadow -Wendif-labels -Wcast-align -Wstrict-aliasing -Wwrite-strings -Wno-unused-parameter -ffast-math -fno-common -fdiagnostics-show-option -fdiagnostics-color=auto
    D: [pulseaudio] main.c: Running on host: Linux x86_64 3.19.3-3-ARCH #1 SMP PREEMPT Wed Apr 8 14:10:00 CEST 2015
    D: [pulseaudio] main.c: Found 6 CPUs.
    I: [pulseaudio] main.c: Page size is 4096 bytes
    D: [pulseaudio] main.c: Compiled with Valgrind support: no
    D: [pulseaudio] main.c: Running in valgrind mode: no
    D: [pulseaudio] main.c: Running in VM: no
    D: [pulseaudio] main.c: Optimized build: yes
    D: [pulseaudio] main.c: FASTPATH defined, only fast path asserts disabled.
    I: [pulseaudio] main.c: Machine ID is d36c9fa4b78f4c8cae7f7ad7897683e3.
    I: [pulseaudio] main.c: Session ID is c1.
    I: [pulseaudio] main.c: Using runtime directory /run/user/1000/pulse.
    I: [pulseaudio] main.c: Using state directory /home/hg1/.config/pulse.
    I: [pulseaudio] main.c: Using modules directory /usr/lib/pulse-6.0/modules.
    I: [pulseaudio] main.c: Running in system mode: no
    E: [pulseaudio] pid.c: Daemon already running.
    E: [pulseaudio] main.c: pa_pid_file_create() failed.
    Last edited by bbarcher (2015-04-27 19:16:41)

  • [UEFI] Problem with efibootmgr on asus 1215b

    Keeping the story short:
    - Bought an asus laptop the last month ( Asus eeepc 1215b with AMD e-450 APU).
    - Verified that system has uefi, hard drive comes formatted with old mbr.
    - This past week i've been having fun: delleted all partitions, created gpt disk, created new partitions, etc.
    - Succefully installed arch with archboot on a pen drive, skiped installing grub2, chrooted new installed system, succefully installed grub2 on efi system partition.
    - Tried running efibootmgr so i could see the grub2 entry in the uefi boot options, but every time i run the program it crashes and most of times locks the system.
    Tried looking for bugs related to efibootmgr but noting relevant comes up.
    The uefi shell reports that the system comes with uefi ver 2.0.
    I'm pretty sure that the problem lies in the asus inplementation since i can't even install windows 7 x64 sp1 on the system because the installer keeps rebooting the system with BSOD...
    The system has other "problems" in linux but i don't want to worry about them for now (watchdog error message, probably fixed on 3.1 kernel, broadcom wireless works ok with the driver from staging but with messages of missing funcionality, battery life reduce 2 hours compared to windows, etc).
    Rigth now my only way to start the system is to always load the uefi shell and then lauch grub.efi manually.
    dmesg:
    ┌─[root @ diazportatil] ─ [/home/diaz]
    └─[>>] dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Linux version 3.0-ARCH (tobias@T-POWA-LX) (gcc version 4.6.1 20110819 (prerelease) (GCC) ) #1 SMP PREEMPT Wed Oct 19 10:27:51 CEST 2011
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4
    [ 0.000000] BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: 0000000000000000 - 00000000000a0000 (usable)
    [ 0.000000] BIOS-e820: 0000000000100000 - 00000000a7b51000 (usable)
    [ 0.000000] BIOS-e820: 00000000a7b51000 - 00000000a7ba2000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000a7ba2000 - 00000000a7cd6000 (reserved)
    [ 0.000000] BIOS-e820: 00000000a7cd6000 - 00000000a7ce7000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000a7ce7000 - 00000000a7d0b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000a7d0b000 - 00000000a7d0c000 (usable)
    [ 0.000000] BIOS-e820: 00000000a7d0c000 - 00000000a7d0d000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000a7d0d000 - 00000000a7d10000 (usable)
    [ 0.000000] BIOS-e820: 00000000a7d10000 - 00000000a7d16000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000a7d16000 - 00000000a7d1d000 (reserved)
    [ 0.000000] BIOS-e820: 00000000a7d1d000 - 00000000a7d24000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000a7d24000 - 00000000a7d4b000 (reserved)
    [ 0.000000] BIOS-e820: 00000000a7d4b000 - 00000000a7d8e000 (ACPI NVS)
    [ 0.000000] BIOS-e820: 00000000a7d8e000 - 00000000a7f00000 (usable)
    [ 0.000000] BIOS-e820: 00000000e0000000 - 00000000f0000000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fec10000 - 00000000fec11000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed00000 - 00000000fed01000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed61000 - 00000000fed71000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fed80000 - 00000000fed90000 (reserved)
    [ 0.000000] BIOS-e820: 00000000fef00000 - 0000000100000000 (reserved)
    [ 0.000000] BIOS-e820: 0000000100001000 - 000000013f000000 (usable)
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] EFI v2.00 by American Megatrends
    [ 0.000000] ACPI 2.0=0xa7b94000 SMBIOS=0xa7d49b18 ACPI=0xa7b94000 MPS=0xfcac0
    [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI!
    [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000008000) (0MB)
    [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000008000-0x000000000007f000) (0MB)
    [ 0.000000] EFI: mem02: type=4, attr=0xf, range=[0x000000000007f000-0x0000000000080000) (0MB)
    [ 0.000000] EFI: mem03: type=3, attr=0xf, range=[0x0000000000080000-0x00000000000a0000) (0MB)
    [ 0.000000] EFI: mem04: type=2, attr=0xf, range=[0x0000000000100000-0x00000000003de000) (2MB)
    [ 0.000000] EFI: mem05: type=7, attr=0xf, range=[0x00000000003de000-0x0000000001000000) (12MB)
    [ 0.000000] EFI: mem06: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001100000) (1MB)
    [ 0.000000] EFI: mem07: type=4, attr=0xf, range=[0x0000000001100000-0x0000000001464000) (3MB)
    [ 0.000000] EFI: mem08: type=3, attr=0xf, range=[0x0000000001464000-0x0000000001468000) (0MB)
    [ 0.000000] EFI: mem09: type=4, attr=0xf, range=[0x0000000001468000-0x0000000001498000) (0MB)
    [ 0.000000] EFI: mem10: type=3, attr=0xf, range=[0x0000000001498000-0x000000000149b000) (0MB)
    [ 0.000000] EFI: mem11: type=4, attr=0xf, range=[0x000000000149b000-0x000000000149d000) (0MB)
    [ 0.000000] EFI: mem12: type=3, attr=0xf, range=[0x000000000149d000-0x00000000014ac000) (0MB)
    [ 0.000000] EFI: mem13: type=4, attr=0xf, range=[0x00000000014ac000-0x00000000014ae000) (0MB)
    [ 0.000000] EFI: mem14: type=3, attr=0xf, range=[0x00000000014ae000-0x00000000014af000) (0MB)
    [ 0.000000] EFI: mem15: type=4, attr=0xf, range=[0x00000000014af000-0x00000000014b9000) (0MB)
    [ 0.000000] EFI: mem16: type=3, attr=0xf, range=[0x00000000014b9000-0x00000000014c3000) (0MB)
    [ 0.000000] EFI: mem17: type=4, attr=0xf, range=[0x00000000014c3000-0x00000000014cc000) (0MB)
    [ 0.000000] EFI: mem18: type=3, attr=0xf, range=[0x00000000014cc000-0x00000000014cd000) (0MB)
    [ 0.000000] EFI: mem19: type=4, attr=0xf, range=[0x00000000014cd000-0x00000000014d4000) (0MB)
    [ 0.000000] EFI: mem20: type=3, attr=0xf, range=[0x00000000014d4000-0x00000000014d7000) (0MB)
    [ 0.000000] EFI: mem21: type=4, attr=0xf, range=[0x00000000014d7000-0x00000000014ea000) (0MB)
    [ 0.000000] EFI: mem22: type=3, attr=0xf, range=[0x00000000014ea000-0x00000000014f0000) (0MB)
    [ 0.000000] EFI: mem23: type=4, attr=0xf, range=[0x00000000014f0000-0x0000000001507000) (0MB)
    [ 0.000000] EFI: mem24: type=3, attr=0xf, range=[0x0000000001507000-0x000000000150f000) (0MB)
    [ 0.000000] EFI: mem25: type=4, attr=0xf, range=[0x000000000150f000-0x0000000001514000) (0MB)
    [ 0.000000] EFI: mem26: type=3, attr=0xf, range=[0x0000000001514000-0x000000000151c000) (0MB)
    [ 0.000000] EFI: mem27: type=4, attr=0xf, range=[0x000000000151c000-0x0000000001556000) (0MB)
    [ 0.000000] EFI: mem28: type=3, attr=0xf, range=[0x0000000001556000-0x0000000001574000) (0MB)
    [ 0.000000] EFI: mem29: type=4, attr=0xf, range=[0x0000000001574000-0x000000000157f000) (0MB)
    [ 0.000000] EFI: mem30: type=3, attr=0xf, range=[0x000000000157f000-0x0000000001597000) (0MB)
    [ 0.000000] EFI: mem31: type=4, attr=0xf, range=[0x0000000001597000-0x0000000001599000) (0MB)
    [ 0.000000] EFI: mem32: type=3, attr=0xf, range=[0x0000000001599000-0x000000000159b000) (0MB)
    [ 0.000000] EFI: mem33: type=4, attr=0xf, range=[0x000000000159b000-0x000000000159c000) (0MB)
    [ 0.000000] EFI: mem34: type=3, attr=0xf, range=[0x000000000159c000-0x000000000159f000) (0MB)
    [ 0.000000] EFI: mem35: type=4, attr=0xf, range=[0x000000000159f000-0x00000000015a2000) (0MB)
    [ 0.000000] EFI: mem36: type=3, attr=0xf, range=[0x00000000015a2000-0x00000000015a3000) (0MB)
    [ 0.000000] EFI: mem37: type=4, attr=0xf, range=[0x00000000015a3000-0x00000000015a7000) (0MB)
    [ 0.000000] EFI: mem38: type=3, attr=0xf, range=[0x00000000015a7000-0x00000000015a9000) (0MB)
    [ 0.000000] EFI: mem39: type=4, attr=0xf, range=[0x00000000015a9000-0x00000000015b1000) (0MB)
    [ 0.000000] EFI: mem40: type=3, attr=0xf, range=[0x00000000015b1000-0x00000000015c1000) (0MB)
    [ 0.000000] EFI: mem41: type=4, attr=0xf, range=[0x00000000015c1000-0x00000000015c3000) (0MB)
    [ 0.000000] EFI: mem42: type=3, attr=0xf, range=[0x00000000015c3000-0x00000000015d4000) (0MB)
    [ 0.000000] EFI: mem43: type=4, attr=0xf, range=[0x00000000015d4000-0x00000000015d7000) (0MB)
    [ 0.000000] EFI: mem44: type=3, attr=0xf, range=[0x00000000015d7000-0x00000000015e3000) (0MB)
    [ 0.000000] EFI: mem45: type=4, attr=0xf, range=[0x00000000015e3000-0x00000000015ec000) (0MB)
    [ 0.000000] EFI: mem46: type=3, attr=0xf, range=[0x00000000015ec000-0x00000000015ee000) (0MB)
    [ 0.000000] EFI: mem47: type=4, attr=0xf, range=[0x00000000015ee000-0x00000000015f7000) (0MB)
    [ 0.000000] EFI: mem48: type=3, attr=0xf, range=[0x00000000015f7000-0x000000000160d000) (0MB)
    [ 0.000000] EFI: mem49: type=4, attr=0xf, range=[0x000000000160d000-0x000000000160e000) (0MB)
    [ 0.000000] EFI: mem50: type=3, attr=0xf, range=[0x000000000160e000-0x0000000001635000) (0MB)
    [ 0.000000] EFI: mem51: type=4, attr=0xf, range=[0x0000000001635000-0x00000000016aa000) (0MB)
    [ 0.000000] EFI: mem52: type=3, attr=0xf, range=[0x00000000016aa000-0x00000000016b2000) (0MB)
    [ 0.000000] EFI: mem53: type=4, attr=0xf, range=[0x00000000016b2000-0x00000000016cb000) (0MB)
    [ 0.000000] EFI: mem54: type=3, attr=0xf, range=[0x00000000016cb000-0x00000000016ce000) (0MB)
    [ 0.000000] EFI: mem55: type=4, attr=0xf, range=[0x00000000016ce000-0x00000000016d2000) (0MB)
    [ 0.000000] EFI: mem56: type=3, attr=0xf, range=[0x00000000016d2000-0x00000000016d7000) (0MB)
    [ 0.000000] EFI: mem57: type=4, attr=0xf, range=[0x00000000016d7000-0x0000000001b46000) (4MB)
    [ 0.000000] EFI: mem58: type=3, attr=0xf, range=[0x0000000001b46000-0x0000000001b49000) (0MB)
    [ 0.000000] EFI: mem59: type=4, attr=0xf, range=[0x0000000001b49000-0x0000000001b4b000) (0MB)
    [ 0.000000] EFI: mem60: type=3, attr=0xf, range=[0x0000000001b4b000-0x0000000001b4d000) (0MB)
    [ 0.000000] EFI: mem61: type=4, attr=0xf, range=[0x0000000001b4d000-0x0000000001b4f000) (0MB)
    [ 0.000000] EFI: mem62: type=3, attr=0xf, range=[0x0000000001b4f000-0x0000000001b51000) (0MB)
    [ 0.000000] EFI: mem63: type=4, attr=0xf, range=[0x0000000001b51000-0x0000000001b68000) (0MB)
    [ 0.000000] EFI: mem64: type=3, attr=0xf, range=[0x0000000001b68000-0x0000000001b8a000) (0MB)
    [ 0.000000] EFI: mem65: type=4, attr=0xf, range=[0x0000000001b8a000-0x0000000001b9d000) (0MB)
    [ 0.000000] EFI: mem66: type=3, attr=0xf, range=[0x0000000001b9d000-0x0000000001b9f000) (0MB)
    [ 0.000000] EFI: mem67: type=4, attr=0xf, range=[0x0000000001b9f000-0x0000000001ba9000) (0MB)
    [ 0.000000] EFI: mem68: type=3, attr=0xf, range=[0x0000000001ba9000-0x0000000001bb0000) (0MB)
    [ 0.000000] EFI: mem69: type=4, attr=0xf, range=[0x0000000001bb0000-0x0000000001bb2000) (0MB)
    [ 0.000000] EFI: mem70: type=3, attr=0xf, range=[0x0000000001bb2000-0x0000000001bb4000) (0MB)
    [ 0.000000] EFI: mem71: type=4, attr=0xf, range=[0x0000000001bb4000-0x0000000001bcd000) (0MB)
    [ 0.000000] EFI: mem72: type=3, attr=0xf, range=[0x0000000001bcd000-0x0000000001bd1000) (0MB)
    [ 0.000000] EFI: mem73: type=4, attr=0xf, range=[0x0000000001bd1000-0x0000000001bd3000) (0MB)
    [ 0.000000] EFI: mem74: type=3, attr=0xf, range=[0x0000000001bd3000-0x0000000001bd5000) (0MB)
    [ 0.000000] EFI: mem75: type=4, attr=0xf, range=[0x0000000001bd5000-0x0000000001bda000) (0MB)
    [ 0.000000] EFI: mem76: type=3, attr=0xf, range=[0x0000000001bda000-0x0000000001beb000) (0MB)
    [ 0.000000] EFI: mem77: type=4, attr=0xf, range=[0x0000000001beb000-0x0000000001bef000) (0MB)
    [ 0.000000] EFI: mem78: type=3, attr=0xf, range=[0x0000000001bef000-0x0000000001bf3000) (0MB)
    [ 0.000000] EFI: mem79: type=4, attr=0xf, range=[0x0000000001bf3000-0x0000000001bf6000) (0MB)
    [ 0.000000] EFI: mem80: type=3, attr=0xf, range=[0x0000000001bf6000-0x0000000001bf9000) (0MB)
    [ 0.000000] EFI: mem81: type=4, attr=0xf, range=[0x0000000001bf9000-0x0000000001e91000) (2MB)
    [ 0.000000] EFI: mem82: type=3, attr=0xf, range=[0x0000000001e91000-0x0000000001e92000) (0MB)
    [ 0.000000] EFI: mem83: type=4, attr=0xf, range=[0x0000000001e92000-0x0000000001e96000) (0MB)
    [ 0.000000] EFI: mem84: type=3, attr=0xf, range=[0x0000000001e96000-0x0000000001e98000) (0MB)
    [ 0.000000] EFI: mem85: type=4, attr=0xf, range=[0x0000000001e98000-0x0000000001e9a000) (0MB)
    [ 0.000000] EFI: mem86: type=3, attr=0xf, range=[0x0000000001e9a000-0x0000000001ea0000) (0MB)
    [ 0.000000] EFI: mem87: type=2, attr=0xf, range=[0x0000000001ea0000-0x0000000001ea6000) (0MB)
    [ 0.000000] EFI: mem88: type=4, attr=0xf, range=[0x0000000001ea6000-0x0000000002128000) (2MB)
    [ 0.000000] EFI: mem89: type=2, attr=0xf, range=[0x0000000002128000-0x000000000213b000) (0MB)
    [ 0.000000] EFI: mem90: type=4, attr=0xf, range=[0x000000000213b000-0x000000000213c000) (0MB)
    [ 0.000000] EFI: mem91: type=2, attr=0xf, range=[0x000000000213c000-0x000000000213f000) (0MB)
    [ 0.000000] EFI: mem92: type=4, attr=0xf, range=[0x000000000213f000-0x0000000002140000) (0MB)
    [ 0.000000] EFI: mem93: type=2, attr=0xf, range=[0x0000000002140000-0x0000000002141000) (0MB)
    [ 0.000000] EFI: mem94: type=7, attr=0xf, range=[0x0000000002141000-0x0000000002143000) (0MB)
    [ 0.000000] EFI: mem95: type=4, attr=0xf, range=[0x0000000002143000-0x000000000214c000) (0MB)
    [ 0.000000] EFI: mem96: type=7, attr=0xf, range=[0x000000000214c000-0x0000000002174000) (0MB)
    [ 0.000000] EFI: mem97: type=2, attr=0xf, range=[0x0000000002174000-0x00000000021e0000) (0MB)
    [ 0.000000] EFI: mem98: type=4, attr=0xf, range=[0x00000000021e0000-0x00000000021e1000) (0MB)
    [ 0.000000] EFI: mem99: type=1, attr=0xf, range=[0x00000000021e1000-0x000000000229c000) (0MB)
    [ 0.000000] EFI: mem100: type=2, attr=0xf, range=[0x000000000229c000-0x00000000022df000) (0MB)
    [ 0.000000] EFI: mem101: type=1, attr=0xf, range=[0x00000000022df000-0x00000000022fe000) (0MB)
    [ 0.000000] EFI: mem102: type=7, attr=0xf, range=[0x00000000022fe000-0x0000000037b32000) (856MB)
    [ 0.000000] EFI: mem103: type=2, attr=0xf, range=[0x0000000037b32000-0x0000000037d91000) (2MB)
    [ 0.000000] EFI: mem104: type=7, attr=0xf, range=[0x0000000037d91000-0x000000007e172000) (1123MB)
    [ 0.000000] EFI: mem105: type=2, attr=0xf, range=[0x000000007e172000-0x00000000a7b51000) (665MB)
    [ 0.000000] EFI: mem106: type=10, attr=0xf, range=[0x00000000a7b51000-0x00000000a7ba2000) (0MB)
    [ 0.000000] EFI: mem107: type=0, attr=0xf, range=[0x00000000a7ba2000-0x00000000a7cd6000) (1MB)
    [ 0.000000] EFI: mem108: type=10, attr=0xf, range=[0x00000000a7cd6000-0x00000000a7ce7000) (0MB)
    [ 0.000000] EFI: mem109: type=6, attr=0x800000000000000f, range=[0x00000000a7ce7000-0x00000000a7d09000) (0MB)
    [ 0.000000] EFI: mem110: type=5, attr=0x800000000000000f, range=[0x00000000a7d09000-0x00000000a7d0a000) (0MB)
    [ 0.000000] EFI: mem111: type=6, attr=0x800000000000000f, range=[0x00000000a7d0a000-0x00000000a7d0b000) (0MB)
    [ 0.000000] EFI: mem112: type=7, attr=0xf, range=[0x00000000a7d0b000-0x00000000a7d0c000) (0MB)
    [ 0.000000] EFI: mem113: type=10, attr=0xf, range=[0x00000000a7d0c000-0x00000000a7d0d000) (0MB)
    [ 0.000000] EFI: mem114: type=7, attr=0xf, range=[0x00000000a7d0d000-0x00000000a7d10000) (0MB)
    [ 0.000000] EFI: mem115: type=10, attr=0xf, range=[0x00000000a7d10000-0x00000000a7d16000) (0MB)
    [ 0.000000] EFI: mem116: type=5, attr=0x800000000000000f, range=[0x00000000a7d16000-0x00000000a7d1d000) (0MB)
    [ 0.000000] EFI: mem117: type=10, attr=0xf, range=[0x00000000a7d1d000-0x00000000a7d24000) (0MB)
    [ 0.000000] EFI: mem118: type=6, attr=0x800000000000000f, range=[0x00000000a7d24000-0x00000000a7d25000) (0MB)
    [ 0.000000] EFI: mem119: type=5, attr=0x800000000000000f, range=[0x00000000a7d25000-0x00000000a7d2b000) (0MB)
    [ 0.000000] EFI: mem120: type=6, attr=0x800000000000000f, range=[0x00000000a7d2b000-0x00000000a7d3c000) (0MB)
    [ 0.000000] EFI: mem121: type=5, attr=0x800000000000000f, range=[0x00000000a7d3c000-0x00000000a7d48000) (0MB)
    [ 0.000000] EFI: mem122: type=6, attr=0x800000000000000f, range=[0x00000000a7d48000-0x00000000a7d4b000) (0MB)
    [ 0.000000] EFI: mem123: type=10, attr=0xf, range=[0x00000000a7d4b000-0x00000000a7d8e000) (0MB)
    [ 0.000000] EFI: mem124: type=3, attr=0xf, range=[0x00000000a7d8e000-0x00000000a7ef6000) (1MB)
    [ 0.000000] EFI: mem125: type=4, attr=0xf, range=[0x00000000a7ef6000-0x00000000a7ef7000) (0MB)
    [ 0.000000] EFI: mem126: type=3, attr=0xf, range=[0x00000000a7ef7000-0x00000000a7f00000) (0MB)
    [ 0.000000] EFI: mem127: type=7, attr=0xf, range=[0x0000000100001000-0x000000013f000000) (1007MB)
    [ 0.000000] EFI: mem128: type=11, attr=0x8000000000000001, range=[0x00000000e0000000-0x00000000f0000000) (256MB)
    [ 0.000000] EFI: mem129: type=11, attr=0x8000000000000001, range=[0x00000000fec00000-0x00000000fec01000) (0MB)
    [ 0.000000] EFI: mem130: type=11, attr=0x8000000000000001, range=[0x00000000fec10000-0x00000000fec11000) (0MB)
    [ 0.000000] EFI: mem131: type=11, attr=0x8000000000000001, range=[0x00000000fed00000-0x00000000fed01000) (0MB)
    [ 0.000000] EFI: mem132: type=11, attr=0x8000000000000001, range=[0x00000000fed61000-0x00000000fed71000) (0MB)
    [ 0.000000] EFI: mem133: type=11, attr=0x8000000000000001, range=[0x00000000fed80000-0x00000000fed90000) (0MB)
    [ 0.000000] EFI: mem134: type=11, attr=0x8000000000000001, range=[0x00000000fef00000-0x0000000100000000) (17MB)
    [ 0.000000] DMI 2.6 present.
    [ 0.000000] DMI: ASUSTeK Computer INC. 1215B/1215B, BIOS 0401 06/17/2011
    [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
    [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
    [ 0.000000] No AGP bridge found
    [ 0.000000] last_pfn = 0x13f000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF write-through
    [ 0.000000] C0000-CEFFF write-protect
    [ 0.000000] CF000-DFFFF uncachable
    [ 0.000000] E0000-E7FFF write-through
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 000000000 mask F00000000 write-back
    [ 0.000000] 1 base 0A7F00000 mask FFFF00000 uncachable
    [ 0.000000] 2 base 0A8000000 mask FF8000000 uncachable
    [ 0.000000] 3 base 0B0000000 mask FF0000000 uncachable
    [ 0.000000] 4 base 0C0000000 mask FC0000000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] TOM2: 000000013f000000 aka 5104M
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820 update range: 00000000a7f00000 - 0000000100000000 (usable) ==> (reserved)
    [ 0.000000] last_pfn = 0xa7f00 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [ffff8800000fcd30] fcd30
    [ 0.000000] initial memory mapped : 0 - 20000000
    [ 0.000000] Base memory trampoline at [ffff880000099000] 99000 size 20480
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: 0000000000000000-00000000a7f00000
    [ 0.000000] 0000000000 - 0080000000 page 1G
    [ 0.000000] 0080000000 - 00a7e00000 page 2M
    [ 0.000000] 00a7e00000 - 00a7f00000 page 4k
    [ 0.000000] kernel direct mapping tables up to a7f00000 @ a7d0d000-a7d10000
    [ 0.000000] init_memory_mapping: 0000000100000000-000000013f000000
    [ 0.000000] 0100000000 - 013f000000 page 2M
    [ 0.000000] kernel direct mapping tables up to 13f000000 @ 13effe000-13f000000
    [ 0.000000] RAMDISK: 37b32000 - 37d91000
    [ 0.000000] ACPI: RSDP 00000000a7b94000 00024 (v02 ALASKA)
    [ 0.000000] ACPI: XSDT 00000000a7b94070 0005C (v01 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 00000000a7b9c418 000F4 (v04 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI Warning: Optional field Pm2ControlBlock has zero address or length: 0x0000000000000000/0x1 (20110413/tbfadt-560)
    [ 0.000000] ACPI: DSDT 00000000a7b94158 082BD (v02 ALASKA A M I 00000000 INTL 20051117)
    [ 0.000000] ACPI: FACS 00000000a7d23f80 00040
    [ 0.000000] ACPI: APIC 00000000a7b9c510 00062 (v03 ALASKA A M I 01072009 AMI 00010013)
    [ 0.000000] ACPI: MCFG 00000000a7b9c578 0003C (v01 ALASKA A M I 01072009 MSFT 00010013)
    [ 0.000000] ACPI: SLIC 00000000a7b9c5b8 00176 (v00 _ASUS_ Notebook 00000000 00000000)
    [ 0.000000] ACPI: HPET 00000000a7b9c730 00038 (v01 ALASKA A M I 01072009 AMI 00000004)
    [ 0.000000] ACPI: SSDT 00000000a7b9c768 00406 (v01 AMD POWERNOW 00000001 AMD 00000001)
    [ 0.000000] ACPI: SSDT 00000000a7b9cb70 0168E (v02 AMD ALIB 00000001 MSFT 04000000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at 0000000000000000-000000013f000000
    [ 0.000000] Initmem setup node 0 0000000000000000-000000013f000000
    [ 0.000000] NODE_DATA [000000013eff9000 - 000000013effdfff]
    [ 0.000000] [ffffea0000000000-ffffea00045fffff] PMD -> [ffff88013ac00000-ffff88013dffffff] on node 0
    [ 0.000000] Zone PFN ranges:
    [ 0.000000] DMA 0x00000010 -> 0x00001000
    [ 0.000000] DMA32 0x00001000 -> 0x00100000
    [ 0.000000] Normal 0x00100000 -> 0x0013f000
    [ 0.000000] Movable zone start PFN for each node
    [ 0.000000] early_node_map[6] active PFN ranges
    [ 0.000000] 0: 0x00000010 -> 0x000000a0
    [ 0.000000] 0: 0x00000100 -> 0x000a7b51
    [ 0.000000] 0: 0x000a7d0b -> 0x000a7d0c
    [ 0.000000] 0: 0x000a7d0d -> 0x000a7d10
    [ 0.000000] 0: 0x000a7d8e -> 0x000a7f00
    [ 0.000000] 0: 0x00100001 -> 0x0013f000
    [ 0.000000] On node 0 totalpages: 945238
    [ 0.000000] DMA zone: 56 pages used for memmap
    [ 0.000000] DMA zone: 10 pages reserved
    [ 0.000000] DMA zone: 3918 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 14280 pages used for memmap
    [ 0.000000] DMA32 zone: 668927 pages, LIFO batch:31
    [ 0.000000] Normal zone: 3528 pages used for memmap
    [ 0.000000] Normal zone: 254519 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 0, version 33, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 low level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0xffffffff base: 0xfed00000
    [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 0000000000100000
    [ 0.000000] PM: Registered nosave memory: 00000000a7b51000 - 00000000a7ba2000
    [ 0.000000] PM: Registered nosave memory: 00000000a7ba2000 - 00000000a7cd6000
    [ 0.000000] PM: Registered nosave memory: 00000000a7cd6000 - 00000000a7ce7000
    [ 0.000000] PM: Registered nosave memory: 00000000a7ce7000 - 00000000a7d0b000
    [ 0.000000] PM: Registered nosave memory: 00000000a7d0c000 - 00000000a7d0d000
    [ 0.000000] PM: Registered nosave memory: 00000000a7d10000 - 00000000a7d16000
    [ 0.000000] PM: Registered nosave memory: 00000000a7d16000 - 00000000a7d1d000
    [ 0.000000] PM: Registered nosave memory: 00000000a7d1d000 - 00000000a7d24000
    [ 0.000000] PM: Registered nosave memory: 00000000a7d24000 - 00000000a7d4b000
    [ 0.000000] PM: Registered nosave memory: 00000000a7d4b000 - 00000000a7d8e000
    [ 0.000000] PM: Registered nosave memory: 00000000a7f00000 - 00000000e0000000
    [ 0.000000] PM: Registered nosave memory: 00000000e0000000 - 00000000f0000000
    [ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000fec00000
    [ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
    [ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fec10000
    [ 0.000000] PM: Registered nosave memory: 00000000fec10000 - 00000000fec11000
    [ 0.000000] PM: Registered nosave memory: 00000000fec11000 - 00000000fed00000
    [ 0.000000] PM: Registered nosave memory: 00000000fed00000 - 00000000fed01000
    [ 0.000000] PM: Registered nosave memory: 00000000fed01000 - 00000000fed61000
    [ 0.000000] PM: Registered nosave memory: 00000000fed61000 - 00000000fed71000
    [ 0.000000] PM: Registered nosave memory: 00000000fed71000 - 00000000fed80000
    [ 0.000000] PM: Registered nosave memory: 00000000fed80000 - 00000000fed90000
    [ 0.000000] PM: Registered nosave memory: 00000000fed90000 - 00000000fef00000
    [ 0.000000] PM: Registered nosave memory: 00000000fef00000 - 0000000100000000
    [ 0.000000] PM: Registered nosave memory: 0000000100000000 - 0000000100001000
    [ 0.000000] Allocating PCI resources starting at a7f00000 (gap: a7f00000:38100000)
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:2 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 27 pages/cpu @ffff88013ec00000 s78464 r8192 d23936 u1048576
    [ 0.000000] pcpu-alloc: s78464 r8192 d23936 u1048576 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 927364
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=/dev/sda4
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 3641752k/5226496k available (4066k kernel code, 1445544k absent, 139200k reserved, 3302k data, 712k init)
    [ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] Verbose stalled-CPUs detection is disabled.
    [ 0.000000] NR_IRQS:2304
    [ 0.000000] Extended CMOS year: 2000
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 30408704 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] Fast TSC calibration using PIT
    [ 0.000000] Detected 1646.773 MHz processor.
    [ 0.003342] Calibrating delay loop (skipped), value calculated using timer frequency.. 3294.77 BogoMIPS (lpj=5489243)
    [ 0.003356] pid_max: default: 32768 minimum: 301
    [ 0.221500] Security Framework initialized
    [ 0.221520] AppArmor: AppArmor disabled by boot time parameter
    [ 0.222834] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.226522] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.228335] Mount-cache hash table entries: 256
    [ 0.229745] Initializing cgroup subsys cpuacct
    [ 0.229872] Initializing cgroup subsys memory
    [ 0.230025] Initializing cgroup subsys devices
    [ 0.230033] Initializing cgroup subsys freezer
    [ 0.230039] Initializing cgroup subsys net_cls
    [ 0.230046] Initializing cgroup subsys blkio
    [ 0.230219] tseg: 00a7f00000
    [ 0.230226] CPU: Physical Processor ID: 0
    [ 0.230232] CPU: Processor Core ID: 0
    [ 0.230238] mce: CPU supports 6 MCE banks
    [ 0.233446] ACPI: Core revision 20110413
    [ 0.253362] ftrace: allocating 16144 entries in 64 pages
    [ 0.257182] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.292274] CPU0: AMD E-450 APU with Radeon(tm) HD Graphics stepping 00
    [ 0.293314] Performance Events: AMD PMU driver.
    [ 0.293314] ... version: 0
    [ 0.293314] ... bit width: 48
    [ 0.293314] ... generic registers: 4
    [ 0.293314] ... value mask: 0000ffffffffffff
    [ 0.293314] ... max period: 00007fffffffffff
    [ 0.293314] ... fixed-purpose events: 0
    [ 0.293314] ... event mask: 000000000000000f
    [ 0.310161] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.336759] Booting Node 0, Processors #1 Ok.
    [ 0.336773] smpboot cpu 1: start_ip = 99000
    [ 0.433375] NMI watchdog enabled, takes one hw-pmu counter.
    [ 0.440020] Brought up 2 CPUs
    [ 0.440033] Total of 2 processors activated (6589.91 BogoMIPS).
    [ 0.441497] devtmpfs: initialized
    [ 0.446744] PM: Registering ACPI NVS region at a7b51000 (331776 bytes)
    [ 0.446755] PM: Registering ACPI NVS region at a7cd6000 (69632 bytes)
    [ 0.446765] PM: Registering ACPI NVS region at a7d0c000 (4096 bytes)
    [ 0.446772] PM: Registering ACPI NVS region at a7d10000 (24576 bytes)
    [ 0.446780] PM: Registering ACPI NVS region at a7d1d000 (28672 bytes)
    [ 0.446788] PM: Registering ACPI NVS region at a7d4b000 (274432 bytes)
    [ 0.450575] print_constraints: dummy:
    [ 0.450858] NET: Registered protocol family 16
    [ 0.451352] Extended Config Space enabled on 0 nodes
    [ 0.451411] ACPI: bus type pci registered
    [ 0.451916] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
    [ 0.451927] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
    [ 0.561879] PCI: Using configuration type 1 for base access
    [ 0.563522] bio: create slab <bio-0> at 0
    [ 0.568592] ACPI: EC: Look up EC in DSDT
    [ 0.572768] ACPI: Executed 3 blocks of module-level executable AML code
    [ 0.591419] ACPI: Interpreter enabled
    [ 0.591433] ACPI: (supports S0 S3 S4 S5)
    [ 0.591509] ACPI: Using IOAPIC for interrupt routing
    [ 0.611556] ACPI: EC: GPE = 0x3, I/O: command/status = 0x66, data = 0x62
    [ 0.612206] ACPI: No dock devices found.
    [ 0.612214] HEST: Table not found.
    [ 0.612225] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.612696] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.613610] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
    [ 0.613619] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
    [ 0.613628] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
    [ 0.613637] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000dffff]
    [ 0.613646] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xffffffff]
    [ 0.613663] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000c8000-0x000dffff] conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]
    [ 0.613717] pci 0000:00:00.0: [1022:1510] type 0 class 0x000600
    [ 0.613801] pci 0000:00:01.0: [1002:9806] type 0 class 0x000300
    [ 0.613824] pci 0000:00:01.0: reg 10: [mem 0xc0000000-0xcfffffff pref]
    [ 0.613840] pci 0000:00:01.0: reg 14: [io 0xf000-0xf0ff]
    [ 0.613857] pci 0000:00:01.0: reg 18: [mem 0xfeb00000-0xfeb3ffff]
    [ 0.613924] pci 0000:00:01.0: supports D1 D2
    [ 0.613961] pci 0000:00:01.1: [1002:1314] type 0 class 0x000403
    [ 0.613982] pci 0000:00:01.1: reg 10: [mem 0xfeb44000-0xfeb47fff]
    [ 0.614064] pci 0000:00:01.1: supports D1 D2
    [ 0.614113] pci 0000:00:04.0: [1022:1512] type 1 class 0x000604
    [ 0.614196] pci 0000:00:04.0: PME# supported from D0 D3hot D3cold
    [ 0.614207] pci 0000:00:04.0: PME# disabled
    [ 0.614249] pci 0000:00:05.0: [1022:1513] type 1 class 0x000604
    [ 0.614341] pci 0000:00:05.0: PME# supported from D0 D3hot D3cold
    [ 0.614350] pci 0000:00:05.0: PME# disabled
    [ 0.614416] pci 0000:00:11.0: [1002:4391] type 0 class 0x000106
    [ 0.614452] pci 0000:00:11.0: reg 10: [io 0xf140-0xf147]
    [ 0.614472] pci 0000:00:11.0: reg 14: [io 0xf130-0xf133]
    [ 0.614491] pci 0000:00:11.0: reg 18: [io 0xf120-0xf127]
    [ 0.614511] pci 0000:00:11.0: reg 1c: [io 0xf110-0xf113]
    [ 0.614531] pci 0000:00:11.0: reg 20: [io 0xf100-0xf10f]
    [ 0.614551] pci 0000:00:11.0: reg 24: [mem 0xfeb4c000-0xfeb4c3ff]
    [ 0.614634] pci 0000:00:12.0: [1002:4397] type 0 class 0x000c03
    [ 0.614661] pci 0000:00:12.0: reg 10: [mem 0xfeb4b000-0xfeb4bfff]
    [ 0.614790] pci 0000:00:12.2: [1002:4396] type 0 class 0x000c03
    [ 0.614825] pci 0000:00:12.2: reg 10: [mem 0xfeb4a000-0xfeb4a0ff]
    [ 0.614941] pci 0000:00:12.2: supports D1 D2
    [ 0.614948] pci 0000:00:12.2: PME# supported from D0 D1 D2 D3hot
    [ 0.614958] pci 0000:00:12.2: PME# disabled
    [ 0.615001] pci 0000:00:13.0: [1002:4397] type 0 class 0x000c03
    [ 0.615027] pci 0000:00:13.0: reg 10: [mem 0xfeb49000-0xfeb49fff]
    [ 0.615148] pci 0000:00:13.2: [1002:4396] type 0 class 0x000c03
    [ 0.615183] pci 0000:00:13.2: reg 10: [mem 0xfeb48000-0xfeb480ff]
    [ 0.615299] pci 0000:00:13.2: supports D1 D2
    [ 0.615305] pci 0000:00:13.2: PME# supported from D0 D1 D2 D3hot
    [ 0.615315] pci 0000:00:13.2: PME# disabled
    [ 0.615359] pci 0000:00:14.0: [1002:4385] type 0 class 0x000c05
    [ 0.615493] pci 0000:00:14.2: [1002:4383] type 0 class 0x000403
    [ 0.615533] pci 0000:00:14.2: reg 10: [mem 0xfeb40000-0xfeb43fff 64bit]
    [ 0.615630] pci 0000:00:14.2: PME# supported from D0 D3hot D3cold
    [ 0.615640] pci 0000:00:14.2: PME# disabled
    [ 0.615669] pci 0000:00:14.3: [1002:439d] type 0 class 0x000601
    [ 0.615796] pci 0000:00:14.4: [1002:4384] type 1 class 0x000604
    [ 0.615886] pci 0000:00:15.0: [1002:43a0] type 1 class 0x000604
    [ 0.615989] pci 0000:00:15.0: supports D1 D2
    [ 0.616047] pci 0000:00:15.2: [1002:43a2] type 1 class 0x000604
    [ 0.616149] pci 0000:00:15.2: supports D1 D2
    [ 0.616208] pci 0000:00:18.0: [1022:1700] type 0 class 0x000600
    [ 0.616277] pci 0000:00:18.1: [1022:1701] type 0 class 0x000600
    [ 0.616340] pci 0000:00:18.2: [1022:1702] type 0 class 0x000600
    [ 0.616408] pci 0000:00:18.3: [1022:1703] type 0 class 0x000600
    [ 0.616485] pci 0000:00:18.4: [1022:1704] type 0 class 0x000600
    [ 0.616548] pci 0000:00:18.5: [1022:1718] type 0 class 0x000600
    [ 0.616612] pci 0000:00:18.6: [1022:1716] type 0 class 0x000600
    [ 0.616703] pci 0000:00:18.7: [1022:1719] type 0 class 0x000600
    [ 0.617006] pci 0000:01:00.0: [14e4:4727] type 0 class 0x000280
    [ 0.617042] pci 0000:01:00.0: reg 10: [mem 0xfea00000-0xfea03fff 64bit]
    [ 0.617163] pci 0000:01:00.0: supports D1 D2
    [ 0.617170] pci 0000:01:00.0: PME# supported from D0 D3hot D3cold
    [ 0.617181] pci 0000:01:00.0: PME# disabled
    [ 0.623439] pci 0000:00:04.0: PCI bridge to [bus 01-01]
    [ 0.623458] pci 0000:00:04.0: bridge window [io 0xfff000-0x0000] (disabled)
    [ 0.623471] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.623486] pci 0000:00:04.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.623726] pci 0000:02:00.0: [1969:2062] type 0 class 0x000200
    [ 0.623879] pci 0000:02:00.0: reg 10: [mem 0xfe900000-0xfe93ffff 64bit]
    [ 0.623947] pci 0000:02:00.0: reg 18: [io 0xe000-0xe07f]
    [ 0.624434] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.624474] pci 0000:02:00.0: PME# disabled
    [ 0.630146] pci 0000:00:05.0: PCI bridge to [bus 02-02]
    [ 0.630168] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
    [ 0.630180] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 0.630195] pci 0000:00:05.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.630307] pci 0000:00:14.4: PCI bridge to [bus 03-03] (subtractive decode)
    [ 0.630319] pci 0000:00:14.4: bridge window [io 0xf000-0x0000] (disabled)
    [ 0.630331] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff] (disabled)
    [ 0.630343] pci 0000:00:14.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.630353] pci 0000:00:14.4: bridge window [io 0x0000-0x0cf7] (subtractive decode)
    [ 0.630362] pci 0000:00:14.4: bridge window [io 0x0d00-0xffff] (subtractive decode)
    [ 0.630371] pci 0000:00:14.4: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
    [ 0.630379] pci 0000:00:14.4: bridge window [mem 0xc0000000-0xffffffff] (subtractive decode)
    [ 0.630473] pci 0000:00:15.0: PCI bridge to [bus 04-06]
    [ 0.630487] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
    [ 0.630497] pci 0000:00:15.0: bridge window [mem 0xfde00000-0xfe7fffff]
    [ 0.630512] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.630648] pci 0000:07:00.0: [1b21:1042] type 0 class 0x000c03
    [ 0.630702] pci 0000:07:00.0: reg 10: [mem 0xfe800000-0xfe807fff 64bit]
    [ 0.630909] pci 0000:07:00.0: PME# supported from D3hot D3cold
    [ 0.630923] pci 0000:07:00.0: PME# disabled
    [ 0.636779] pci 0000:00:15.2: PCI bridge to [bus 07-07]
    [ 0.636799] pci 0000:00:15.2: bridge window [io 0xfff000-0x0000] (disabled)
    [ 0.636813] pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
    [ 0.636829] pci 0000:00:15.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
    [ 0.636892] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
    [ 0.637438] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE20._PRT]
    [ 0.637557] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PE22._PRT]
    [ 0.637692] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR14._PRT]
    [ 0.637777] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR15._PRT]
    [ 0.637882] pci0000:00: Requesting ACPI _OSC control (0x1d)
    [ 0.637893] pci0000:00: ACPI _OSC request failed (AE_NOT_FOUND), returned control mask: 0x1d
    [ 0.637899] ACPI _OSC control for PCIe not granted, disabling ASPM
    [ 0.660658] ACPI: PCI Interrupt Link [LNKA] (IRQs 4 7 10 11 14 15) *0
    [ 0.660884] ACPI: PCI Interrupt Link [LNKB] (IRQs 4 7 10 11 14 15) *0
    [ 0.661108] ACPI: PCI Interrupt Link [LNKC] (IRQs 4 7 10 11 14 15) *0
    [ 0.661332] ACPI: PCI Interrupt Link [LNKD] (IRQs 4 7 10 11 14 15) *0
    [ 0.661512] ACPI: PCI Interrupt Link [LNKE] (IRQs 4 7 10 11 14 15) *0
    [ 0.661658] ACPI: PCI Interrupt Link [LNKF] (IRQs 4 7 10 11 14 15) *0
    [ 0.661800] ACPI: PCI Interrupt Link [LNKG] (IRQs 4 7 10 11 14 15) *0
    [ 0.661945] ACPI: PCI Interrupt Link [LNKH] (IRQs 4 7 10 11 14 15) *0
    [ 0.662240] vgaarb: device added: PCI:0000:00:01.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.662282] vgaarb: loaded
    [ 0.662287] vgaarb: bridge control possible 0000:00:01.0
    [ 0.662580] PCI: Using ACPI for IRQ routing
    [ 0.675546] PCI: pci_cache_line_size set to 64 bytes
    [ 0.675914] reserve RAM buffer: 00000000a7b51000 - 00000000a7ffffff
    [ 0.675928] reserve RAM buffer: 00000000a7d0c000 - 00000000a7ffffff
    [ 0.675939] reserve RAM buffer: 00000000a7d10000 - 00000000a7ffffff
    [ 0.675948] reserve RAM buffer: 00000000a7f00000 - 00000000a7ffffff
    [ 0.675956] reserve RAM buffer: 000000013f000000 - 000000013fffffff
    [ 0.676371] NetLabel: Initializing
    [ 0.676378] NetLabel: domain hash size = 128
    [ 0.676383] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.676429] NetLabel: unlabeled traffic allowed by default
    [ 0.676517] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
    [ 0.676532] hpet0: 3 comparators, 32-bit 14.318180 MHz counter
    [ 0.677680] Switching to clocksource hpet
    [ 0.677790] Switched to NOHz mode on CPU #0
    [ 0.677924] Switched to NOHz mode on CPU #1
    [ 0.695534] pnp: PnP ACPI init
    [ 0.695588] ACPI: bus type pnp registered
    [ 0.696175] pnp 00:00: [bus 00-ff]
    [ 0.696184] pnp 00:00: [io 0x0cf8-0x0cff]
    [ 0.696192] pnp 00:00: [io 0x0000-0x0cf7 window]
    [ 0.696199] pnp 00:00: [io 0x0d00-0xffff window]
    [ 0.696207] pnp 00:00: [mem 0x000a0000-0x000bffff window]
    [ 0.696215] pnp 00:00: [mem 0x000c8000-0x000dffff window]
    [ 0.696222] pnp 00:00: [mem 0xc0000000-0xffffffff window]
    [ 0.696229] pnp 00:00: [mem 0x00000000 window]
    [ 0.696422] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
    [ 0.696557] pnp 00:01: [mem 0xe0000000-0xefffffff]
    [ 0.696837] system 00:01: [mem 0xe0000000-0xefffffff] has been reserved
    [ 0.696849] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.698747] pnp 00:02: [io 0x040b]
    [ 0.698754] pnp 00:02: [io 0x04d6]
    [ 0.698760] pnp 00:02: [io 0x0c00-0x0c01]
    [ 0.698766] pnp 00:02: [io 0x0c14]
    [ 0.698772] pnp 00:02: [io 0x0c50-0x0c51]
    [ 0.698779] pnp 00:02: [io 0x0c52]
    [ 0.698784] pnp 00:02: [io 0x0c6c]
    [ 0.698790] pnp 00:02: [io 0x0c6f]
    [ 0.698796] pnp 00:02: [io 0x0cd0-0x0cd1]
    [ 0.698802] pnp 00:02: [io 0x0cd2-0x0cd3]
    [ 0.698815] pnp 00:02: [io 0x0cd4-0x0cd5]
    [ 0.698821] pnp 00:02: [io 0x0cd6-0x0cd7]
    [ 0.698827] pnp 00:02: [io 0x0cd8-0x0cdf]
    [ 0.698833] pnp 00:02: [io 0x0800-0x089f]
    [ 0.698840] pnp 00:02: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.698847] pnp 00:02: [io 0x0000-0x000f]
    [ 0.698853] pnp 00:02: [io 0x0b20-0x0b3f]
    [ 0.698860] pnp 00:02: [io 0x0900-0x090f]
    [ 0.698866] pnp 00:02: [io 0x0910-0x091f]
    [ 0.698872] pnp 00:02: [io 0xfe00-0xfefe]
    [ 0.698879] pnp 00:02: [io 0x0060-0x005f disabled]
    [ 0.698886] pnp 00:02: [io 0x0064-0x0063 disabled]
    [ 0.698892] pnp 00:02: [mem 0xfec00000-0xfec00fff]
    [ 0.698899] pnp 00:02: [mem 0xfee00000-0xfee00fff]
    [ 0.698906] pnp 00:02: [mem 0xfed80000-0xfed8ffff]
    [ 0.698912] pnp 00:02: [mem 0xfed61000-0xfed70fff]
    [ 0.698919] pnp 00:02: [mem 0xfec10000-0xfec10fff]
    [ 0.698926] pnp 00:02: [mem 0xfed00000-0xfed00fff]
    [ 0.698932] pnp 00:02: [mem 0xffe00000-0xffffffff]
    [ 0.699137] system 00:02: [io 0x040b] has been reserved
    [ 0.699146] system 00:02: [io 0x04d6] has been reserved
    [ 0.699154] system 00:02: [io 0x0c00-0x0c01] has been reserved
    [ 0.699163] system 00:02: [io 0x0c14] has been reserved
    [ 0.699171] system 00:02: [io 0x0c50-0x0c51] has been reserved
    [ 0.699179] system 00:02: [io 0x0c52] has been reserved
    [ 0.699187] system 00:02: [io 0x0c6c] has been reserved
    [ 0.699195] system 00:02: [io 0x0c6f] has been reserved
    [ 0.699203] system 00:02: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.699211] system 00:02: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.699219] system 00:02: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.699228] system 00:02: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.699236] system 00:02: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.699244] system 00:02: [io 0x0800-0x089f] has been reserved
    [ 0.699254] system 00:02: [io 0x0b20-0x0b3f] has been reserved
    [ 0.699262] system 00:02: [io 0x0900-0x090f] has been reserved
    [ 0.699270] system 00:02: [io 0x0910-0x091f] has been reserved
    [ 0.699279] system 00:02: [io 0xfe00-0xfefe] has been reserved
    [ 0.699291] system 00:02: [mem 0xfec00000-0xfec00fff] could not be reserved
    [ 0.699300] system 00:02: [mem 0xfee00000-0xfee00fff] has been reserved
    [ 0.699310] system 00:02: [mem 0xfed80000-0xfed8ffff] has been reserved
    [ 0.699319] system 00:02: [mem 0xfed61000-0xfed70fff] has been reserved
    [ 0.699329] system 00:02: [mem 0xfec10000-0xfec10fff] has been reserved
    [ 0.699338] system 00:02: [mem 0xfed00000-0xfed00fff] has been reserved
    [ 0.699347] system 00:02: [mem 0xffe00000-0xffffffff] has been reserved
    [ 0.699359] system 00:02: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.699533] pnp 00:03: [irq 12]
    [ 0.699623] pnp 00:03: Plug and Play ACPI device, IDs SYN0a13 SYN0a00 SYN0002 PNP0f03 PNP0f13 PNP0f12 (active)
    [ 0.699709] pnp 00:04: [io 0x0060]
    [ 0.699715] pnp 00:04: [io 0x0064]
    [ 0.699798] pnp 00:04: [irq 1]
    [ 0.699881] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 PNP030b (active)
    [ 0.699939] pnp 00:05: [dma 4]
    [ 0.699946] pnp 00:05: [io 0x0000-0x000f]
    [ 0.699952] pnp 00:05: [io 0x0081-0x0083]
    [ 0.699958] pnp 00:05: [io 0x0087]
    [ 0.699964] pnp 00:05: [io 0x0089-0x008b]
    [ 0.699970] pnp 00:05: [io 0x008f]
    [ 0.699976] pnp 00:05: [io 0x00c0-0x00df]
    [ 0.700107] pnp 00:05: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.700144] pnp 00:06: [io 0x0070-0x0071]
    [ 0.700159] pnp 00:06: [irq 8]
    [ 0.700242] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.700271] pnp 00:07: [io 0x0061]
    [ 0.700357] pnp 00:07: Plug and Play ACPI device, IDs PNP0800 (active)
    [ 0.700903] pnp 00:08: [io 0x0010-0x001f]
    [ 0.700910] pnp 00:08: [io 0x0022-0x003f]
    [ 0.700916] pnp 00:08: [io 0x0062-0x0063]
    [ 0.700922] pnp 00:08: [io 0x0065-0x006f]
    [ 0.700928] pnp 00:08: [io 0x0072-0x007f]
    [ 0.700934] pnp 00:08: [io 0x0080]
    [ 0.700940] pnp 00:08: [io 0x0084-0x0086]
    [ 0.700946] pnp 00:08: [io 0x0088]
    [ 0.700952] pnp 00:08: [io 0x008c-0x008e]
    [ 0.700964] pnp 00:08: [io 0x0090-0x009f]
    [ 0.700970] pnp 00:08: [io 0x00a2-0x00bf]
    [ 0.700976] pnp 00:08: [io 0x00b1]
    [ 0.700982] pnp 00:08: [io 0x00e0-0x00ef]
    [ 0.700988] pnp 00:08: [io 0x04d0-0x04d1]
    [ 0.700994] pnp 00:08: [io 0x040b]
    [ 0.701000] pnp 00:08: [io 0x04d6]
    [ 0.701006] pnp 00:08: [io 0x0c00-0x0c01]
    [ 0.701011] pnp 00:08: [io 0x0c14]
    [ 0.701017] pnp 00:08: [io 0x0c50-0x0c51]
    [ 0.701023] pnp 00:08: [io 0x0c52]
    [ 0.701029] pnp 00:08: [io 0x0c6c]
    [ 0.701034] pnp 00:08: [io 0x0c6f]
    [ 0.701040] pnp 00:08: [io 0x0cd0-0x0cd1]
    [ 0.701046] pnp 00:08: [io 0x0cd2-0x0cd3]
    [ 0.701052] pnp 00:08: [io 0x0cd4-0x0cd5]
    [ 0.701058] pnp 00:08: [io 0x0cd6-0x0cd7]
    [ 0.701065] pnp 00:08: [io 0x0cd8-0x0cdf]
    [ 0.701071] pnp 00:08: [io 0x0b00-0x0b3f]
    [ 0.701077] pnp 00:08: [io 0x0800-0x089f]
    [ 0.701084] pnp 00:08: [io 0x0000-0xffffffffffffffff disabled]
    [ 0.701091] pnp 00:08: [io 0x0b00-0x0b0f]
    [ 0.701097] pnp 00:08: [io 0x0b20-0x0b3f]
    [ 0.701103] pnp 00:08: [io 0x0900-0x090f]
    [ 0.701109] pnp 00:08: [io 0x0910-0x091f]
    [ 0.701115] pnp 00:08: [io 0xfe00-0xfefe]
    [ 0.701122] pnp 00:08: [io 0x0060-0x005f disabled]
    [ 0.701128] pnp 00:08: [io 0x0064-0x0063 disabled]
    [ 0.701136] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.701144] pnp 00:08: [mem 0xffb80000-0xffbfffff]
    [ 0.701150] pnp 00:08: [mem 0xfec10000-0xfec1001f]
    [ 0.701157] pnp 00:08: [mem 0xfed40000-0xfed44fff]
    [ 0.701163] pnp 00:08: [mem 0xfed80000-0xfed80fff]
    [ 0.701171] pnp 00:08: [mem 0x00000000-0xffffffffffffffff disabled]
    [ 0.701412] system 00:08: [io 0x04d0-0x04d1] has been reserved
    [ 0.701421] system 00:08: [io 0x040b] has been reserved
    [ 0.701430] system 00:08: [io 0x04d6] has been reserved
    [ 0.701438] system 00:08: [io 0x0c00-0x0c01] has been reserved
    [ 0.701446] system 00:08: [io 0x0c14] has been reserved
    [ 0.701454] system 00:08: [io 0x0c50-0x0c51] has been reserved
    [ 0.701463] system 00:08: [io 0x0c52] has been reserved
    [ 0.701471] system 00:08: [io 0x0c6c] has been reserved
    [ 0.701479] system 00:08: [io 0x0c6f] has been reserved
    [ 0.701487] system 00:08: [io 0x0cd0-0x0cd1] has been reserved
    [ 0.701495] system 00:08: [io 0x0cd2-0x0cd3] has been reserved
    [ 0.701504] system 00:08: [io 0x0cd4-0x0cd5] has been reserved
    [ 0.701512] system 00:08: [io 0x0cd6-0x0cd7] has been reserved
    [ 0.701520] system 00:08: [io 0x0cd8-0x0cdf] has been reserved
    [ 0.701529] system 00:08: [io 0x0b00-0x0b3f] could not be reserved
    [ 0.701538] system 00:08: [io 0x0800-0x089f] has been reserved
    [ 0.701547] system 00:08: [io 0x0b00-0x0b0f] has been reserved
    [ 0.701555] system 00:08: [io 0x0b20-0x0b3f] has been reserved
    [ 0.701564] system 00:08: [io 0x0900-0x090f] has been reserved
    [ 0.701572] system 00:08: [io 0x0910-0x091f] has been reserved
    [ 0.701581] system 00:08: [io 0xfe00-0xfefe] has been reserved
    [ 0.701593] system 00:08: [mem 0xffb80000-0xffbfffff] has been reserved
    [ 0.701603] system 00:08: [mem 0xfec10000-0xfec1001f] has been reserved
    [ 0.701612] system 00:08: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.701621] system 00:08: [mem 0xfed80000-0xfed80fff] has been reserved
    [ 0.701633] system 00:08: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.701666] pnp 00:09: [io 0x00f0-0x00ff]
    [ 0.701750] pnp 00:09: [irq 13]
    [ 0.701832] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
    [ 0.702020] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.702516] pnp 00:0b: [mem 0xa8000000-0xbfffffff]
    [ 0.702699] system 00:0b: [mem 0xa8000000-0xbfffffff] has been reserved
    [ 0.702711] system 00:0b: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.703233] pnp 00:0c: [mem 0xfed00000-0xfed003ff]
    [ 0.703481] pnp 00:0c: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.703507] pnp: PnP ACPI: found 13 devices
    [ 0.703512] ACPI: ACPI bus type pnp unregistered
    [ 0.714028] PCI: max bus depth: 1 pci_try_num: 2
    [ 0.714109] pci 0000:00:04.0: PCI bridge to [bus 01-01]
    [ 0.714116] pci 0000:00:04.0: bridge window [io disabled]
    [ 0.714129] pci 0000:00:04.0: bridge window [mem 0xfea00000-0xfeafffff]
    [ 0.714139] pci 0000:00:04.0: bridge window [mem pref disabled]
    [ 0.714152] pci 0000:00:05.0: PCI bridge to [bus 02-02]
    [ 0.714161] pci 0000:00:05.0: bridge window [io 0xe000-0xefff]
    [ 0.714172] pci 0000:00:05.0: bridge window [mem 0xfe900000-0xfe9fffff]
    [ 0.714181] pci 0000:00:05.0: bridge window [mem pref disabled]
    [ 0.714194] pci 0000:00:14.4: PCI bridge to [bus 03-03]
    [ 0.714200] pci 0000:00:14.4: bridge window [io disabled]
    [ 0.714248] pci 0000:00:14.4: bridge window [mem disabled]
    [ 0.714258] pci 0000:00:14.4: bridge window [mem pref disabled]
    [ 0.714272] pci 0000:00:15.0: PCI bridge to [bus 04-06]
    [ 0.714281] pci 0000:00:15.0: bridge window [io 0xd000-0xdfff]
    [ 0.714293] pci 0000:00:15.0: bridge window [mem 0xfde00000-0xfe7fffff]
    [ 0.714305] pci 0000:00:15.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.714320] pci 0000:00:15.2: PCI bridge to [bus 07-07]
    [ 0.714326] pci 0000:00:15.2: bridge window [io disabled]
    [ 0.714338] pci 0000:00:15.2: bridge window [mem 0xfe800000-0xfe8fffff]
    [ 0.714348] pci 0000:00:15.2: bridge window [mem pref disabled]
    [ 0.714394] pci 0000:00:04.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.714407] pci 0000:00:04.0: setting latency timer to 64
    [ 0.714429] pci 0000:00:05.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 0.714439] pci 0000:00:05.0: setting latency timer to 64
    [ 0.714464] pci 0000:00:15.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.714475] pci 0000:00:15.0: setting latency timer to 64
    [ 0.714491] pci 0000:00:15.2: PCI INT A -> GSI 16 (level, low) -> IRQ 16
    [ 0.714502] pci 0000:00:15.2: setting latency timer to 64
    [ 0.714513] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.714521] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.714529] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.714536] pci_bus 0000:00: resource 7 [mem 0xc0000000-0xffffffff]
    [ 0.714545] pci_bus 0000:01: resource 1 [mem 0xfea00000-0xfeafffff]
    [ 0.714553] pci_bus 0000:02: resource 0 [io 0xe000-0xefff]
    [ 0.714561] pci_bus 0000:02: resource 1 [mem 0xfe900000-0xfe9fffff]
    [ 0.714569] pci_bus 0000:03: resource 4 [io 0x0000-0x0cf7]
    [ 0.714576] pci_bus 0000:03: resource 5 [io 0x0d00-0xffff]
    [ 0.714584] pci_bus 0000:03: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.714592] pci_bus 0000:03: resource 7 [mem 0xc0000000-0xffffffff]
    [ 0.714599] pci_bus 0000:04: resource 0 [io 0xd000-0xdfff]
    [ 0.714607] pci_bus 0000:04: resource 1 [mem 0xfde00000-0xfe7fffff]
    [ 0.714615] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.714623] pci_bus 0000:07: resource 1 [mem 0xfe800000-0xfe8fffff]
    [ 0.714879] NET: Registered protocol family 2
    [ 0.715518] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.719355] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
    [ 0.725833] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.726586] TCP: Hash tables configured (established 524288 bind 65536)
    [ 0.726594] TCP reno registered
    [ 0.726637] UDP hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.726852] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
    [ 0.727670] NET: Registered protocol family 1
    [ 0.727715] pci 0000:00:01.0: Boot video device
    [ 1.310691] PCI: CLS 64 bytes, default 64
    [ 1.310860] Unpacking initramfs...
    [ 1.424377] Freeing initrd memory: 2428k freed
    [ 1.426264] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 1.426277] Placing 64MB software IO TLB between ffff8800a3b51000 - ffff8800a7b51000
    [ 1.426286] software IO TLB at phys 0xa3b51000 - 0xa7b51000
    [ 1.427661] audit: initializing netlink socket (disabled)
    [ 1.427693] type=2000 audit(1319946381.426:1): initialized
    [ 1.448607] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 1.494793] VFS: Disk quotas dquot_6.5.2
    [ 1.495312] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 1.495884] msgmni has been set to 7132
    [ 1.497006] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
    [ 1.497380] io scheduler noop registered
    [ 1.497393] io scheduler deadline registered
    [ 1.497627] io scheduler cfq registered (default)
    [ 1.498669] ERST: Table is not found!
    [ 1.498858] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.687804] Linux agpgart interface v0.103
    [ 1.688078] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
    [ 1.705949] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.706055] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.706338] mousedev: PS/2 mouse device common for all mice
    [ 1.707298] rtc_cmos 00:06: RTC can wake from S4
    [ 1.707543] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
    [ 1.707653] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
    [ 1.707700] cpuidle: using governor ladder
    [ 1.707707] cpuidle: using governor menu
    [ 1.708386] TCP cubic registered
    [ 1.708394] NET: Registered protocol family 17
    [ 1.708413] Registering the dns_resolver key type
    [ 1.708737] PM: Hibernation image not present or could not be loaded.
    [ 1.708758] registered taskstats version 1
    [ 1.729669] rtc_cmos 00:06: setting system clock to 2011-10-30 03:46:22 UTC (1319946382)
    [ 1.729905] Initializing network drop monitor service
    [ 1.734860] Freeing unused kernel memory: 712k freed
    [ 1.735407] Write protecting the kernel read-only data: 6144k
    [ 1.736127] Freeing unused kernel memory: 12k freed
    [ 1.739434] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.750936] Freeing unused kernel memory: 776k freed
    [ 1.782522] udevd[37]: starting version 174
    [ 1.802352] [drm] Initialized drm 1.1.0 20060810
    [ 1.861967] [drm] radeon defaulting to kernel modesetting.
    [ 1.861977] [drm] radeon kernel modesetting enabled.
    [ 1.862110] radeon 0000:00:01.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 1.862124] radeon 0000:00:01.0: setting latency timer to 64
    [ 1.862641] [drm] initializing kernel modesetting (PALM 0x1002:0x9806 0x1043:0x84E3).
    [ 1.862831] [drm] register mmio base: 0xFEB00000
    [ 1.862838] [drm] register mmio size: 262144
    [ 1.863128] ATOM BIOS: AMD
    [ 1.863210] radeon 0000:00:01.0: VRAM: 384M 0x0000000000000000 - 0x0000000017FFFFFF (384M used)
    [ 1.863221] radeon 0000:00:01.0: GTT: 512M 0x0000000018000000 - 0x0000000037FFFFFF
    [ 1.863240] mtrr: type mismatch for c0000000,10000000 old: write-back new: write-combining
    [ 1.863249] [drm] Detected VRAM RAM=384M, BAR=256M
    [ 1.863255] [drm] RAM width 32bits DDR
    [ 1.864423] [TTM] Zone kernel: Available graphics memory: 1826606 kiB.
    [ 1.864431] [TTM] Initializing pool allocator.
    [ 1.864506] [drm] radeon: 384M of VRAM memory ready
    [ 1.864513] [drm] radeon: 512M of GTT memory ready.
    [ 1.864557] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
    [ 1.864563] [drm] Driver supports precise vblank timestamp query.
    [ 1.864631] radeon 0000:00:01.0: irq 40 for MSI/MSI-X
    [ 1.864643] radeon 0000:00:01.0: radeon: using MSI.
    [ 1.864709] [drm] radeon: irq initialized.
    [ 1.864724] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 1.867378] [drm] Loading PALM Microcode
    [ 1.887071] radeon 0000:00:01.0: WB enabled
    [ 1.904012] [drm] ring test succeeded in 1 usecs
    [ 1.904397] [drm] radeon: ib pool ready.
    [ 1.904600] [drm] ib test succeeded in 0 usecs
    [ 1.905475] [drm] Radeon Display Connectors
    [ 1.905481] [drm] Connector 0:
    [ 1.905487] [drm] LVDS
    [ 1.905492] [drm] HPD1
    [ 1.905499] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c
    [ 1.905505] [drm] Encoders:
    [ 1.905510] [drm] LCD1: INTERNAL_UNIPHY
    [ 1.905516] [drm] Connector 1:
    [ 1.905520] [drm] HDMI-A
    [ 1.905524] [drm] HPD2
    [ 1.905530] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c
    [ 1.905536] [drm] Encoders:
    [ 1.905540] [drm] DFP1: INTERNAL_UNIPHY
    [ 1.905545] [drm] Connector 2:
    [ 1.905549] [drm] VGA
    [ 1.905555] [drm] DDC: 0x64d8 0x64d8 0x64dc 0x64dc 0x64e0 0x64e0 0x64e4 0x64e4
    [ 1.905560] [drm] Encoders:
    [ 1.905565] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.963921] [drm] Radeon display connector LVDS-1: Found valid EDID
    [ 1.974532] [drm] Radeon display connector HDMI-A-1: No monitor connected or invalid EDID
    [ 1.985119] [drm] Radeon display connector VGA-1: No monitor connected or invalid EDID
    [ 1.985176] [drm] Internal thermal controller without fan control
    [ 1.985292] [drm] radeon: power management initialized
    [ 2.430231] Refined TSC clocksource calibration: 1646.493 MHz.
    [ 2.430253] Switching to clocksource tsc
    [ 2.441523] [drm] fb mappable at 0xC0141000
    [ 2.441533] [drm] vram apper at 0xC0000000
    [ 2.441538] [drm] size 4325376
    [ 2.441543] [drm] fb depth is 24
    [ 2.441548] [drm] pitch is 5632
    [ 2.441760] fbcon: radeondrmfb (fb0) is primary device
    [ 2.970337] Console: switching to colour frame buffer device 170x48
    [ 2.981796] fb0: radeondrmfb frame buffer device
    [ 2.981803] drm: registered panic notifier
    [ 2.981822] [drm] Initialized radeon 2.10.0 20080528 for 0000:00:01.0 on minor 0
    [ 3.224300] SCSI subsystem initialized
    [ 3.244979] libata version 3.00 loaded.
    [ 3.248983] ahci 0000:00:11.0: version 3.0
    [ 3.249104] ahci 0000:00:11.0: PCI INT A -> GSI 19 (level, low) -> IRQ 19
    [ 3.249288] ahci 0000:00:11.0: AHCI 0001.0200 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
    [ 3.249302] ahci 0000:00:11.0: flags: 64bit ncq sntf ilck pm led clo pmp pio slum part
    [ 3.250126] scsi0 : ahci
    [ 3.253537] ata1: SATA max UDMA/133 abar m1024@0xfeb4c000 port 0xfeb4c100 irq 19
    [ 3.740339] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
    [ 3.790195] ata1.00: ATA-8: ST9500325AS, 0003SDM1, max UDMA/133
    [ 3.790208] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 31/32)
    [ 3.793179] ata1.00: configured for UDMA/133
    [ 3.794080] scsi 0:0:0:0: Direct-Access ATA ST9500325AS 0003 PQ: 0 ANSI: 5
    [ 3.804903] sd 0:0:0:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB)
    [ 3.805171] sd 0:0:0:0: [sda] Write Protect is off
    [ 3.805182] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 3.805260] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 3.867602] sda: sda1 sda2 sda3 sda4 sda5 sda6
    [ 3.869169] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 4.840158] EXT4-fs (sda4): INFO: recovery required on readonly filesystem
    [ 4.840173] EXT4-fs (sda4): write access will be enabled during recovery
    [ 6.427151] EXT4-fs (sda4): recovery complete
    [ 6.432292] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
    [ 9.050349] udevd[213]: starting version 174
    [ 9.487437] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1
    [ 9.487460] ACPI: Power Button [PWRB]
    [ 9.487633] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
    [ 9.499057] ACPI: AC Adapter [AC0] (on-line)
    [ 9.499580] ACPI: Lid Switch [LID]
    [ 9.499767] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input3
    [ 9.499786] ACPI: Sleep Button [SLPB]
    [ 9.499978] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 9.499992] ACPI: Power Button [PWRF]
    [ 9.505322] ACPI: acpi_idle registered with cpuidle
    [ 9.522339] wmi: Mapper loaded
    [ 9.624464] ACPI: Battery Slot [BAT0] (battery present)
    [ 9.638516] acpi device:44: registered as cooling_device2
    [ 9.638713] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 9.638734] ACPI: Video Device [VGA] (multi-head: yes rom: no post: no)
    [ 9.690846] atl1c 0000:02:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
    [ 9.690964] atl1c 0000:02:00.0: setting latency timer to 64
    [ 9.811003] atl1c 0000:02:00.0: version 1.0.1.0-NAPI
    [ 9.853986] SP5100 TCO timer: SP5100 TCO WatchDog Timer Driver v0.01
    [ 9.854230] SP5100 TCO timer: mmio address 0xbafe00 already in use
    [ 9.891545] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 9.929164] usbcore: registered new interface driver usbfs
    [ 9.929813] usbcore: registered new interface driver hub
    [ 9.930506] usbcore: registered new device driver usb
    [ 9.957258] xhci_hcd 0000:07:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 9.957429] xhci_hcd 0000:07:00.0: setting latency timer to 64
    [ 9.957443] xhci_hcd 0000:07:00.0: xHCI Host Controller
    [ 9.957675] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 1
    [ 9.964815] xhci_hcd 0000:07:00.0: irq 18, io mem 0xfe800000
    [ 9.964931] xhci_hcd 0000:07:00.0: irq 41 for MSI/MSI-X
    [ 9.964942] xhci_hcd 0000:07:00.0: irq 42 for MSI/MSI-X
    [ 9.964952] xhci_hcd 0000:07:00.0: irq 43 for MSI/MSI-X
    [ 9.965400] xHCI xhci_add_endpoint called for root hub
    [ 9.965408] xHCI xhci_check_bandwidth called for root hub
    [ 9.965510] hub 1-0:1.0: USB hub found
    [ 9.965576] hub 1-0:1.0: 2 ports detected
    [ 9.965788] xhci_hcd 0000:07:00.0: xHCI Host Controller
    [ 9.965810] xhci_hcd 0000:07:00.0: new USB bus registered, assigned bus number 2
    [ 9.970212] xHCI xhci_add_endpoint called for root hub
    [ 9.970219] xHCI xhci_check_bandwidth called for root hub
    [ 9.970317] hub 2-0:1.0: USB hub found
    [ 9.970363] hub 2-0:1.0: 2 ports detected
    [ 10.080972] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 10.117840] cfg80211: Calling CRDA to update world regulatory domain
    [ 10.120954] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 10.121074] ehci_hcd 0000:00:12.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 10.121214] ehci_hcd 0000:00:12.2: EHCI Host Controller
    [ 10.121269] ehci_hcd 0000:00:12.2: new USB bus registered, assigned bus number 3
    [ 10.121296] ehci_hcd 0000:00:12.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 10.121356] QUIRK: Enable AMD PLL fix
    [ 10.121381] ehci_hcd 0000:00:12.2: debug port 1
    [ 10.121445] ehci_hcd 0000:00:12.2: irq 17, io mem 0xfeb4a000
    [ 10.127427] asus_wmi: ASUS WMI generic driver loaded
    [ 10.130163] ehci_hcd 0000:00:12.2: USB 2.0 started, EHCI 1.00
    [ 10.130626] hub 3-0:1.0: USB hub found
    [ 10.130643] hub 3-0:1.0: 5 ports detected
    [ 10.130976] ehci_hcd 0000:00:13.2: PCI INT B -> GSI 17 (level, low) -> IRQ 17
    [ 10.131069] ehci_hcd 0000:00:13.2: EHCI Host Controller
    [ 10.131100] ehci_hcd 0000:00:13.2: new USB bus registered, assigned bus number 4
    [ 10.131123] ehci_hcd 0000:00:13.2: applying AMD SB700/SB800/Hudson-2/3 EHCI dummy qh workaround
    [ 10.131188] ehci_hcd 0000:00:13.2: debug port 1
    [ 10.131225] ehci_hcd 0000:00:13.2: irq 17, io mem 0xfeb48000
    [ 10.140150] ehci_hcd 0000:00:13.2: USB 2.0 started, EHCI 1.00
    [ 10.140621] hub 4-0:1.0: USB hub found
    [ 10.140639] hub 4-0:1.0: 5 ports detected
    [ 10.141476] piix4_smbus 0000:00:14.0: SMBus Host Controller at 0xb00, revision 0
    [ 10.148954] asus_wmi: Initialization: 0x0
    [ 10.149059] asus_wmi: BIOS WMI version: 0.9
    [ 10.149243] asus_wmi: SFUN value: 0x0
    [ 10.154479] input: Eee PC WMI hotkeys as /devices/platform/eeepc-wmi/input/input7
    [ 10.164329] asus_wmi: Backlight controlled by ACPI video driver
    [ 10.281305] brcmutil: module is from the staging directory, the quality is unknown, you have been warned.
    [ 10.281728] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
    [ 10.281840] ohci_hcd 0000:00:12.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.281932] ohci_hcd 0000:00:12.0: OHCI Host Controller
    [ 10.281976] ohci_hcd 0000:00:12.0: new USB bus registered, assigned bus number 5
    [ 10.282056] ohci_hcd 0000:00:12.0: irq 18, io mem 0xfeb4b000
    [ 10.338263] hub 5-0:1.0: USB hub found
    [ 10.338287] hub 5-0:1.0: 5 ports detected
    [ 10.338608] ohci_hcd 0000:00:13.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
    [ 10.338753] ohci_hcd 0000:00:13.0: OHCI Host Controller
    [ 10.338786] ohci_hcd 0000:00:13.0: new USB bus registered, assigned bus number 6
    [ 10.338844] ohci_hcd 0000:00:13.0: irq 18, io mem 0xfeb49000
    [ 10.356298] brcmsmac: module is from the staging directory, the quality is unknown, you have been warned.
    [ 10.363054] brcmsmac 0000:01:00.0: bus 1 slot 0 func 0 irq 7
    [ 10.

    @Diaz, the bug has been reported in Ubuntu here:
    https://bugs.launchpad.net/ubuntu/+sour … bug/879858
    It may be worth following it. Also it would be nice if you mark it as it affects you, to increase it's priority.
    Also there's a way to improve boot procedure:
    1) Create a file startup.nsh in your /boot/efi with the following content:
    fs0:boot
    2) Create a file called "boot.nsh" in /boot/efi with the following content:
    fs0:
    cd \EFI\ubuntu
    grubx64
    This will reduce boot procedure to just <F2> <left> <up> <enter> <enter>

  • [solved] no sound with multimedia apps using Pulseaudio Dummy drive

    It seems audio issues are kindof frequent atm, but I couldn't solve the strange issue using the informations provided in the threads nor the wiki
    Issue:
    One app plays audio just fine: Deadbeef Audio player, but no activity shows up in Pavucontrol while playing.
        Deadbeef uses default Alsa outpput (currently Pulse audio server)
    The other multimedia that I use or tried (mplayer, VLC and paplay test.wav) play files with no sound to be heard. Pavucontrol just shows 'dummy output' activity
    as for mplayer that is the case with default pulse and alsa audio drivers
    Context:
    1/ Recently switched from ALSA to PulseAudio
    Have no  ~/.asoundrc
    2/ First appeared when:
    Installed software updates last week. I lazily hoped it will resolve itself with the next update which it didn't so far. None of the packets I updated had linux|pulse|alsa|sound|audio in its name.
    Another issue appeared at the same time: no software is able to play any media from the DVD drive. The optical drive itself is well recognized whether by 'lsscsi' or /proc/sys/dev/cdrom/info
    3/ PulseAudio did not start today after booting the system
    $ pulseaudio --start
        E: [pulseaudio] main.c: daemon startup failed
    Started OK after commenting "/etc/pulse/default.pa" config line that remap microphone to mono for Skype (as per the Pulseaudio wiki)
    System Audio info:
    $ cat /proc/asound/cards
    0 [PCH ]: HDA-Intel - HDA Intel PCH
    HDA Intel PCH at 0xf7d00000 irq 46
    $ lspci|grep -i audio
    00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
    $ aplay -l
    carte 0: PCH [HDA Intel PCH], périphérique 0: ALC892 Analog [ALC892 Analog]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    carte 0: PCH [HDA Intel PCH], périphérique 1: ALC892 Digital [ALC892 Digital]
    Sous-périphériques: 1/1
    Sous-périphérique #0: subdevice #0
    # fuser -v /dev/snd/*
    /dev/snd/controlC0: kozaki 20121 F.... pulseaudio
    $ cat /proc/asound/modules;
    0 snd_hda_intel
    $ lsmod | grep ^snd;
    snd_hda_codec_realtek 67127 1
    snd_hda_codec_generic 63126 1 snd_hda_codec_realtek
    snd_hda_intel 26327 3
    snd_hda_controller 26727 1 snd_hda_intel
    snd_hda_codec 108552 4 snd_hda_codec_realtek,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 17244 1 snd_hda_codec
    snd_pcm 88487 3 snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 26614 1 snd_pcm
    snd 69340 13 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    $ systool -vm relevant_snd_module
    EDIT
    $ systool -vm snd_hda_intel
    Module = "snd_hda_intel"
    Attributes:
    coresize = "26327"
    initsize = "0"
    initstate = "live"
    refcnt = "5"
    taint = ""
    uevent = <store method only>
    Parameters:
    align_buffer_size = "-1"
    bdl_pos_adj = "1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    beep_mode = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    enable_msi = "1"
    enable = "Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y,Y"
    id = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    index = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    jackpoll_ms = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    model = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    patch = "(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null),(null)"
    position_fix = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    power_save = "1"
    power_save_controller= "Y"
    probe_mask = "-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1,-1"
    probe_only = "0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0"
    single_cmd = "N"
    snoop = "Y"
    Sections:
    .bss = "0xffffffffa0365a80"
    .data = "0xffffffffa0365000"
    .data.unlikely = "0xffffffffa03657d0"
    .exit.text = "0xffffffffa0362930"
    .gnu.linkonce.this_module= "0xffffffffa0365800"
    .init.text = "0xffffffffa0368000"
    .note.gnu.build-id = "0xffffffffa0363000"
    .rodata = "0xffffffffa0363040"
    .rodata.str1.1 = "0xffffffffa0363f02"
    .rodata.str1.8 = "0xffffffffa03642e0"
    .smp_locks = "0xffffffffa0364618"
    .strtab = "0xffffffffa036b508"
    .symtab = "0xffffffffa0369000"
    .text = "0xffffffffa0360000"
    __mcount_loc = "0xffffffffa0364848"
    __param = "0xffffffffa0364628"
    __verbose = "0xffffffffa0365640"
    I guess it might be a rather basic configuration step that I missed and am blind to see. If so, sorry for wasting your time :-/ Hint appreciated.
    Last edited by kozaki (2014-09-01 19:43:16)

    Read how to post correctly to get English output.
    kozaki wrote:$ systool -vm relevant_snd_module;
    Really? What do you think relevant_snd_module is? When you copy something from another thread, maybe it would be wise to read through it first. I tried to explain that there is no relevant_snd_module, it is a hint to the user, yes you, to use the module that is relevant in users case, which often is snd_hda_intel, which again is also mentioned in the other thread. Read it and correct your post accordingly please.
    As for the issue at hand, is module-suspend-on-idle loaded? If so, disable and unload it. Start PA with '-vvvv' switch and post the log here. You might want to try defaulting the configuration for PA, meaning delete your ~/.config/pulse. Does your GPU have a hdmi sound card?
    Check if you can get sound output with PA killed through speaker-test:
    speaker-test -c 8 -t wav -D plug:"dmix:{CARD PCH DEV 0}"
    speaker-test -c 2 -t wav -D plug:"dmix:{CARD PCH DEV 0}"
    Both should work launched in that order at the same time.

  • [SOLVED]No sound with ALSA. I'm looking for help with troubleshooting.

    Hi!
    Recently I bought a new laptop (HP Probook 450 G1). For some reason I can't hear sound from the laptop's speaker or headphones. I already read the troubleshooting guide on wiki. Unfortunately none of the solutions described on the wiki helped. I'm not using PulseAudio and I'm out of ideas.
    Additional information:
    Alsamixer screenshot.
    ~ lsmod |grep snd
    snd_hda_codec_realtek 54803 1
    snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
    snd_hda_codec_hdmi 40396 1
    snd_hda_intel 22831 6
    snd_hda_controller 22975 1 snd_hda_intel
    snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
    snd_hwdep 6652 1 snd_hda_codec
    snd_pcm 83207 6 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
    snd_timer 19294 3 snd_pcm
    snd 61276 16 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec_generic,snd_hda_codec,snd_hda_intel
    soundcore 5551 2 snd,snd_hda_codec
    ~ aplay -l
    **** List of PLAYBACK Hardware Devices ****
    card 0: SB [HDA ATI SB], device 0: ALC888 Analog [ALC888 Analog]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    card 0: SB [HDA ATI SB], device 1: ALC888 Digital [ALC888 Digital]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: HDMI [HDA ATI HDMI], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    ~ speaker-test
    speaker-test 1.0.28
    Playback device is default
    Stream parameters are 48000Hz, S16_LE, 1 channels
    Using 16 octaves of pink noise
    Rate set to 48000Hz (requested 48000Hz)
    Buffer size range from 2048 to 16384
    Period size range from 1024 to 1024
    Using max buffer size 16384
    Periods = 4
    was set period_size = 1024
    was set buffer_size = 16384
    0 - Front Left
    Time per period = 2.651060
    0 - Front Left
    lspci |grep Audio
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] SBx00 Azalia (Intel HDA)
    01:00.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Juniper HDMI Audio [Radeon HD 5700 Series]
    ~ cat /proc/asound/cards
    cat /proc/asound/cards
    0 [SB ]: HDA-Intel - HDA ATI SB
    HDA ATI SB at 0xfe024000 irq 16
    1 [HDMI ]: HDA-Intel - HDA ATI HDMI
    HDA ATI HDMI at 0xfdffc000 irq 43
    Last edited by Skitter (2014-09-01 06:22:30)

    brebs wrote:
    emeres wrote:Why disable a card?
    So that the right output becomes the all-important *default* output. And it's conveniently a simple one-liner.
     I am very aware of that, why not use index instead? It is as convenient as enable. Why leave the user with a disabled device, when it can continue to work? I consider this highly inefficient, because it does not solve the actual issue and creates a potential problem in the future.
     In this case, user interaction was the cause, so it does not matter.
    Edit: Typo.
    Last edited by emeres (2014-08-29 17:45:29)

  • [SOLVED] Low sound with ALSA

    Hi! I'm using alsa on a laptop with master, speaker and PCM at 100%, and I still can't get an output as loud as I'd like.
    On ubuntu with pulseaudio, I had the option of setting the volume to 120% on the sound preferences menu, which made a desirable volume level for me. Is there an equivalent thing in arch? Is this like setting PCM to something higher than 0b?
    Cheers!
    Last edited by orlox (2010-08-14 20:09:46)

    Just installed pulseaudio. Not really a solution to the name of this thread, since I didn't get a loud volume with ALSA, but it solves my problem of having low volume on my PC

  • [Solved] No sound with udev 173

    After updating to udev 173, i don't have any sound. The problem resolves when downgrading to udev 172. I compared the permissions in /dev/snd:
    < drwxr-xr-x 2 root root 60 by-path
    < crw-rw----+ 1 root audio 116, 8 controlC0
    < crw-rw----+ 1 root audio 116, 7 hwC0D2
    < crw-rw----+ 1 root audio 116, 6 pcmC0D0c
    < crw-rw----+ 1 root audio 116, 5 pcmC0D0p
    < crw-rw----+ 1 root audio 116, 4 pcmC0D1c
    < crw-rw----+ 1 root audio 116, 3 pcmC0D1p
    < crw-rw----+ 1 root audio 116, 2 pcmC0D2c
    < crw-rw---- 1 root audio 116, 1 seq
    < crw-rw----+ 1 root audio 116, 33 timer
    > drwxr-xr-x 2 root root 60 by-path
    > crw-rw---- 1 root audio 116, 8 controlC0
    > crw-rw---- 1 root audio 116, 7 hwC0D2
    > crw-rw---- 1 root audio 116, 6 pcmC0D0c
    > crw-rw---- 1 root audio 116, 5 pcmC0D0p
    > crw-rw---- 1 root audio 116, 4 pcmC0D1c
    > crw-rw---- 1 root audio 116, 3 pcmC0D1p
    > crw-rw---- 1 root audio 116, 2 pcmC0D2c
    > crw-rw---- 1 root audio 116, 1 seq
    > crw-rw---- 1 root audio 116, 33 timer
    I don't know if it's related, but i noticed a segfault in dmesg:
    [ 209.583561] gnome-settings-[725]: segfault at b3aca160 ip b3aca160 sp bfcaeccc error 4
    What should i do?
    Edit: Fixed with 173-2.
    Last edited by Wey (2011-07-31 15:25:53)

    Please mark your topic solved Wey.

  • [SOLVED] No sound with HDMI output

    aplay -l:
    **** List of PLAYBACK Hardware Devices ****
    card 0: PCH [HDA Intel PCH], device 0: ALC269VB Analog [ALC269VB Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 0: PCH [HDA Intel PCH], device 3: HDMI 0 [HDMI 0]
    Subdevices: 0/1
    Subdevice #0: subdevice #0
    lsmod | grep snd:
    lsmod | grep snd
    snd_hda_codec_hdmi 23672 1
    snd_hda_codec_realtek 60377 1
    snd_hda_intel 24053 7
    snd_hda_codec 94273 3 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_intel
    snd_hwdep 6300 1 snd_hda_codec
    snd_pcm 74958 4 snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel
    snd_page_alloc 7217 2 snd_pcm,snd_hda_intel
    snd_timer 18966 1 snd_pcm
    snd 58997 20 snd_hda_codec_realtek,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_hda_codec,snd_hda_intel
    soundcore 5410 1 snd
    I tried the solution in the wiki. The sound would work when I issued the aplay command, but then when I set the .asoundrc file, sound would not work (after logging out and logging back in). I also tried this solution from another thread, but I mistakenly forgot to make backups of the two respective files and now I have no sound at all. Help would be much appreciated! Thanks!
    Edit:
    Also tried this, didn't work either.
    Edit2:
    Finally got it solved! All I had to do was go into alsamixer and unmute the "S/PDIF" channel, follow the instructions from the wiki (see link above), and I finally got the sound to work.
    Last edited by bl3ndy (2012-07-08 20:05:18)

    Check this:
    https://discussions.apple.com/message/20616650#20616650

  • [SOLVED] No sound with Chromium, libpepflashplayer problem.

    Hi,
    I had problem with no sound in Chromium when using the flashplayer, but it all worked in Firefox.
    The problem was the chromium-pepper-flash player that I used as described in the Wiki.
    with that player I get following message when starting Chromium:
    ALSA lib setup.c:565:(add_elem) Cannot obtain info for CTL elem (MIXER,'Audigy Analog/Digital Output Jack',0,0,0): No such file or directory
    But if I use:
    Shockwave Flash
    Version:    11.2 r202
    Location:    /usr/lib/mozilla/plugins/libflashplayer.so
    Type:    NPAPI
    I got sound ok, unfortunately the player crach much more often, something that was the reason I changed to  chromium-pepper-flash player
    Any ides why I do not get sound in Chromium with chromium-pepper-flash player?
    Best regards.
    Christer
    Last edited by agkbill (2012-12-08 08:29:34)

    To share my findings.
    The problem was a the settings in asound.conf.
    My old "asound.conf."
    # conver alsa API over jack API
    # use it with
    # % aplay foo.wav
    # use this as default
    pcm.!default {
    type plug
    slave { pcm "jack" }
    ctl.mixer0 {
    type hw
    card 1
    # pcm type jack
    pcm.jack {
    type jack
    playback_ports {
    0 system:playback_1
    1 system:playback_2
    capture_ports {
    0 system:capture_1
    1 system:capture_2
    Left since I was playing around wirh PureData and Jack.
    All my outher audio apps like mpd, xbmc worked just finde with this one but not libpepflashplayer.
    My new asound.conf
    # use this as default
    pcm.!default {
    type hw
    card 0
    device 0
    ctl.mixer0 {
    type hw
    card 0
    With the new one also libpepflashplayer works OK.
    Using libflashplayer was a very bad option for me because it crash so often. libpepflashplayer much more stable for me.
    All the best.
    Christer

  • [SOLVED] No Sound with ALSA & Pulseaudio

    Recently I made the transition from Debian to Arch, installed on a
    seperate partition using the chroot install method.
    All went smoothly, with the exception that there is no audio whatsoever.
    Over the last week I've read through the related topics on the wiki and searched the forum,
    but to no avail
    Any assistance would be appreciated.
    Here are some details;
    lspci | grep audio
    00:1b.0 Audio device [0403]: Intel Corporation 82801FB/FBM/FR/FW/FRW
    (ICH6 Family) High Definition Audio Controller [8086:2668] (rev 03)
    lsmod | grep snd
    snd_intel8x0m 9736 0
    snd_ac97_codec 89404 1 snd_intel8x0m
    ac97_bus 910 1 snd_ac97_codec
    snd_hda_codec_realtek 35187 1
    snd_hda_intel 31255 0
    snd_hda_codec 128666 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 4750 1 snd_hda_codec
    snd_pcm_oss 33509 0
    snd_mixer_oss 12450 1 snd_pcm_oss
    snd_pcm 63880 5
    snd_pcm_oss,snd_ac97_codec,snd_hda_codec,snd_hda_intel,snd_intel8x0m
    snd_page_alloc 5978 3 snd_pcm,snd_hda_intel,snd_intel8x0m
    snd_seq_dummy 1131 0
    snd_seq_oss 25116 0
    snd_seq_midi 4104 0
    snd_seq_midi_event 4484 2 snd_seq_oss,snd_seq_midi
    snd_rawmidi 14828 1 snd_seq_midi
    snd_seq 41044 6
    snd_seq_midi_event,snd_seq_oss,snd_seq_dummy,snd_seq_midi
    snd_seq_device 4256 5
    snd_seq,snd_rawmidi,snd_seq_oss,snd_seq_dummy,snd_seq_midi
    snd_timer 14946 2 snd_pcm,snd_seq
    snd 44566 14
    snd_hda_codec_realtek,snd_pcm_oss,snd_ac97_codec,snd_hwdep,snd_timer,snd_pcm,snd_se$
    soundcore 4386 1 snd
    ls /dev/snd/*
    /dev/snd/controlC0
    /dev/snd/hwC0D2
    /dev/snd/seq
    /dev/snd/timer
    /dev/snd/by-path:
    pci-0000:00:1b.0
    cat /proc/asound/modules
    0 snd_hda_intel
    aplay -lL
    null
    Discard all samples (playback) or generate zero samples (capture)
    pulse
    PulseAudio Sound Server
    default
    Default ALSA Output (currently PulseAudio Sound Server)
    **** List of PLAYBACK Hardware Devices ****
    Screenshots of alsamixer
    http://www.imgbin.org/index.php?page=image&id=15874
    http://www.imgbin.org/index.php?page=image&id=15875
    pavucontrol shows no devices for configuration
    Last edited by naesk (2013-12-13 08:11:44)

    a couple of days i had a similar problem, because sound modules for my internal modem were loaded. maybe you can try to blacklist the snd_hda_codec_realtek module, which looks like a network card.
    you can achieve that by putting
    blacklist snd_hda_codec_realtek
    in /etc/modprobe.d/modprobe.conf and reboot.
    rgds
    hcjl
    Last edited by hcjl (2013-12-13 08:39:48)

  • [SOLVED] no sound with audigy 2 after kernel 2.6.26.2-1 upgrade

    Hello
    today i upgraded my system with pacman and after reboot my audigy 2 stopped working... i read that many have problem with the kernel upgrade...i think it's my problem too... So what can i do?
    thanks in advance...
    Last edited by kcr (2008-08-12 09:28:42)

    sorry, you're right...
    1) these are the package that pacman updates today:
    [2008-08-11 10:36] upgraded kernel26 (2.6.25.11-1 -> 2.6.26.2-1)
    [2008-08-11 10:36] upgraded klibc (1.5-5 -> 1.5-6)
    [2008-08-11 10:36] upgraded klibc-extras (2.4-1 -> 2.4-2)
    [2008-08-11 10:36] upgraded klibc-kbd (1.15.20080312-5 -> 1.15.20080312-6)
    [2008-08-11 10:36] upgraded klibc-module-init-tools (3.2.2-3 -> 3.4-1)
    [2008-08-11 10:36] upgraded klibc-udev (116-3 -> 116-4)
    [2008-08-11 10:36] upgraded lirc-utils (0.8.2-1 -> 0.8.3-1)
    [2008-08-11 10:36] upgraded man-pages (3.05-1 -> 3.06-1)
    [2008-08-11 10:36] upgraded tzdata (2008d-1 -> 2008e-1)
    2) no error messages at all;
    3)no crash, only no sound...
    thanks...

  • [Solved] No sound with ALSA (change default sound card)

    I installed Arch on another laptop and I am unable to get sound working.
    # lspci | grep -i audio
    00:01.1 Audio device: Advanced Micro Devices, Inc. [AMD/ATI] Device 9840
    00:14.2 Audio device: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller (rev 02)
    Two devices show up in alsamixer. The first (the default, I assume) shows up only an S/PDIF button that I can toggle. If I select the other sound card, I can change volume normally.
    I followed this solution in the wiki with no success.
    How can I make the second sound card the default one?
    Last edited by Gradient (2014-09-09 18:17:14)

    Here is the requested info with the cards in the corrected order:
    $ aplay -lL;
    null
    Discard all samples (playback) or generate zero samples (capture)
    default:CARD=Generic_1
    HD-Audio Generic, ALC3227 Analog
    Default Audio Device
    sysdefault:CARD=Generic_1
    HD-Audio Generic, ALC3227 Analog
    Default Audio Device
    front:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    Front speakers
    surround21:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    2.1 Surround output to Front and Subwoofer speakers
    surround40:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    4.0 Surround output to Front and Rear speakers
    surround41:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    4.1 Surround output to Front, Rear and Subwoofer speakers
    surround50:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    5.0 Surround output to Front, Center and Rear speakers
    surround51:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
    surround71:CARD=Generic_1,DEV=0
    HD-Audio Generic, ALC3227 Analog
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
    hdmi:CARD=Generic,DEV=0
    HD-Audio Generic, HDMI 0
    HDMI Audio Output
    **** List of PLAYBACK Hardware Devices ****
    card 0: Generic_1 [HD-Audio Generic], device 0: ALC3227 Analog [ALC3227 Analog]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    card 1: Generic [HD-Audio Generic], device 3: HDMI 0 [HDMI 0]
    Subdevices: 1/1
    Subdevice #0: subdevice #0
    $ for i in /proc/asound/card[0-9]*; do echo "--- $i ---";amixer -c $(cat $i/id); done;
    --- /proc/asound/card0 ---
    Simple mixer control 'Master',0
    Capabilities: pvolume pvolume-joined pswitch pswitch-joined
    Playback channels: Mono
    Limits: Playback 0 - 87
    Mono: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Headphone',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 87
    Mono:
    Front Left: Playback 87 [100%] [0.00dB] [on]
    Front Right: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Speaker',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 87
    Mono:
    Front Left: Playback 87 [100%] [0.00dB] [on]
    Front Right: Playback 87 [100%] [0.00dB] [on]
    Simple mixer control 'Mic',0
    Capabilities: pvolume pswitch
    Playback channels: Front Left - Front Right
    Limits: Playback 0 - 31
    Mono:
    Front Left: Playback 31 [100%] [12.00dB] [off]
    Front Right: Playback 31 [100%] [12.00dB] [off]
    Simple mixer control 'Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 3 [100%] [36.00dB]
    Front Right: 3 [100%] [36.00dB]
    Simple mixer control 'Capture',0
    Capabilities: cvolume cswitch
    Capture channels: Front Left - Front Right
    Limits: Capture 0 - 63
    Front Left: Capture 39 [62%] [12.00dB] [on]
    Front Right: Capture 39 [62%] [12.00dB] [on]
    Simple mixer control 'Auto-Mute Mode',0
    Capabilities: enum
    Items: 'Disabled' 'Enabled'
    Item0: 'Enabled'
    Simple mixer control 'Internal Mic Boost',0
    Capabilities: volume
    Playback channels: Front Left - Front Right
    Capture channels: Front Left - Front Right
    Limits: 0 - 3
    Front Left: 3 [100%] [36.00dB]
    Front Right: 3 [100%] [36.00dB]
    Simple mixer control 'Mute-LED Mode',0
    Capabilities: enum
    Items: 'On' 'Off' 'Follow Master'
    Item0: 'Follow Master'
    --- /proc/asound/card1 ---
    Simple mixer control 'IEC958',0
    Capabilities: pswitch pswitch-joined
    Playback channels: Mono
    Mono: Playback [off]
    $ lspci -vnn | grep -A 1 -i audio
    00:01.1 Audio device [0403]: Advanced Micro Devices, Inc. [AMD/ATI] Device [1002:9840]
    Subsystem: Hewlett-Packard Company Device [103c:22cd]
    00:14.2 Audio device [0403]: Advanced Micro Devices, Inc. [AMD] FCH Azalia Controller [1022:780d] (rev 02)
    Subsystem: Hewlett-Packard Company Device [103c:22cd]
    emeres wrote:What do you mean 'is visible in alsamixer'? F6 does not list it? Did you use index or enable?
    Yes, that is what I meant; F6 did not list them both when I use your options. I must have done something wrong the first time, because now it does.
    emeres wrote:Read this alsa documentation and 'mad modprobe'.
    Thanks for the link. That was what I was looking for.

Maybe you are looking for