[SOLVED] No (wired) net after boot, yet available with "ip link.."

Hi,
I'm on a fully updated (inc. latest systemd), networkmanager based, Arch-X86-64/KDE system.
The system is connected to the router via eth1 (r8169).
After boot, I have no net connection (see below), yet, I do get connected, once I issue the "ip link set eth1 up" command.
Please advise.
Thanks
-------copy of terminal----------
# journalctl -b | grep eth
Sep 19 07:21:34 Miki_Arch systemd[1]: Expecting device sys-subsystem-net-devices-eth1.device...
Sep 19 07:21:34 Miki_Arch systemd[1]: Expecting device sys-subsystem-net-devices-eth0.device...
Sep 19 07:21:35 Miki_Arch kernel: r8169 0000:05:00.0 eth0: RTL8168d/8111d at 0xffffc900144e4000, 6c:f0:49:ed:b3:e9, XID 083000c0 IRQ 50
Sep 19 07:21:35 Miki_Arch kernel: r8169 0000:05:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Sep 19 07:21:35 Miki_Arch kernel: r8169 0000:06:00.0 eth1: RTL8168d/8111d at 0xffffc900144e6000, 6c:f0:49:ed:b3:eb, XID 083000c0 IRQ 51
Sep 19 07:21:35 Miki_Arch kernel: r8169 0000:06:00.0 eth1: jumbo features [frames: 9200 bytes, tx checksumming: ko]
Sep 19 07:21:52 Miki_Arch systemd[1]: Starting dhcpcd on eth0...
Sep 19 07:21:52 Miki_Arch systemd[1]: Starting dhcpcd on eth1...
Sep 19 07:21:53 Miki_Arch kernel: r8169 0000:06:00.0 eth1: link down
Sep 19 07:21:53 Miki_Arch kernel: r8169 0000:06:00.0 eth1: link down
Sep 19 07:21:53 Miki_Arch kernel: IPv6: ADDRCONF(NETDEV_UP): eth1: link is not ready
Sep 19 07:21:53 Miki_Arch kernel: r8169 0000:05:00.0 eth0: link down
Sep 19 07:21:53 Miki_Arch kernel: IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
Sep 19 07:21:55 Miki_Arch dhcpcd[343]: eth1: waiting for carrier
Sep 19 07:21:55 Miki_Arch dhcpcd[340]: eth0: waiting for carrier
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): carrier is OFF
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): new Ethernet device (driver: 'r8169' ifindex: 2)
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): exported as /org/freedesktop/NetworkManager/Devices/0
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): preparing device.
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth0): deactivating device (reason 'managed') [2]
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> Added default wired connection 'Wired connection 1' for /sys/devices/pci0000:00/0000:00:07.0/0000:05:00.0/net/eth0
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): carrier is OFF
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): new Ethernet device (driver: 'r8169' ifindex: 3)
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): exported as /org/freedesktop/NetworkManager/Devices/1
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): device state change: unmanaged -> unavailable (reason 'managed') [10 20 2]
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): preparing device.
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> (eth1): deactivating device (reason 'managed') [2]
Sep 19 07:21:58 Miki_Arch NetworkManager[344]: <info> Added default wired connection 'Wired connection 2' for /sys/devices/pci0000:00/0000:00:09.0/0000:06:00.0/net/eth1
Sep 19 07:22:25 Miki_Arch systemd[1]: [email protected]: control process exited, code=exited status=1
Sep 19 07:22:25 Miki_Arch systemd[1]: Failed to start dhcpcd on eth0.
Sep 19 07:22:25 Miki_Arch systemd[1]: Unit [email protected] entered failed state.
Sep 19 07:22:25 Miki_Arch systemd[1]: [email protected]: control process exited, code=exited status=1
Sep 19 07:22:25 Miki_Arch systemd[1]: Failed to start dhcpcd on eth1.
Sep 19 07:22:25 Miki_Arch systemd[1]: Unit [email protected] entered failed state.
Last edited by mibadt (2013-09-20 02:54:28)

Seems like you are running both NetworkManager and [email protected]. Pick one so they don't have to compete with each other.

Similar Messages

  • Nokia x3-02 wifi no network available with d link ...

    nokia x3-02 wifi no network available with d link g510

    As far as I can see the dwlg510 is an wireless adapter for PC. Not an accesspoint. You need a router.
    ftp://ftp.dlink.com/Wireless/dwlg510/
    ‡Thank you for hitting the Blue/Green Star button‡
    N8-00 RM 596 V:111.030.0609; E71-1(05) RM 346 V: 500.21.009

  • No boot device available error on Optiplex 780

    I need help.  We purchased six desktop computers at a going out of business auction to use at our store.  We were told that they had all of the previous files removed from the old business and Windows 7 reloaded.  On all six of the Dell Optiplex 780 models the start up gives the error of "no boot device available" with the option of pressing the F2, F5 or F12 keys.  We have tried changing the boot sequence and engaged the default settings but no luck.  These computers were used as a call center and had been hooked up to a "company processing center computer".  They were sold "as-is" and there is no one at the old business to talk to.  Am I out the money or is there some fix so that these desktop models can actually be used as individual computers?  Each computer has the dell service tag and Windows 7 product key codes attached but since I can't get it to a start up page, I can't log on to any internet help from those computers.

    Hi HouseofTrains,
    There seems to be an issue with the hard drive on your computer. I’d suggest that you run the diagnostics on the computer by following the steps mentioned below and check if there is any issue with the hardware on your system.
    Turn on or restart the computer.
    Immediately at the Dell logo screen, starting tapping the <F12> key once a second until the One Time Boot menu appears (if the computer boots to Windows turn the computer off and try again).
    At the One Time Boot menu, press the <Down> arrow key to highlight Diagnostics, PSA+ or Enter ePSA, then press <Enter> to begin the PSA.
    Write down any error codes listed. Reply to us with the error codes.
    I’d also advise you to reseat the hard drive on the computer by following the steps below in the link and check if it resolves the issue.
    http://dell.to/VWcDMc
    Please let me know if this helps.

  • No sound after updating to 10.7.3 - no boot camp available

    All sounds gone after updating to 10.7.3
    tried to reset NVRAM + PRAM via pressing (cmd)+(alt)+(p)+(r) while starting - this was not helping.
    Found also the thread below, but i have no boot camp available
    https://discussions.apple.com/message/17477460
    All ideas welcome----

    You should correct the model of mac, cannot be PowerBook, perhaps MacBook or MacBook Pro.
    I have read that many people have had problems after last update, here all is fine. The only idea I have is to download from Apple site the combo update (the bigger update), and re-run it. This often solves issues.
    As about BC, can you see that partition in Disk Utility? If yes, open Finder preferences, do setttings look like here?

  • [SOLVED] [...] to an access point only immediately after booting.

    I recently got a new router (D-link DIR-615E3), and installed dd-wrt on it. Now, the wired connection works perfectly, and so do wireless connections from any device but my computer.
    The connection works well if I connect it right after booting,
    root /home/martin # iwconfig wlan0 essid Hochelaga
    root /home/martin # iwconfig wlan0
    wlan0 IEEE 802.11bgn ESSID:"Hochelaga"
    Mode:Managed Frequency:2.462 GHz Access Point: B8:A3:86:4B:67:D0
    Bit Rate=36 Mb/s Tx-Power=15 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:on
    Link Quality=70/70 Signal level=-23 dBm
    Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0
    Tx excessive retries:0 Invalid misc:1 Missed beacon:0
    Yet, if I try to do it again at any other time, the video card doesn't associate itself with the access point.
    root /home/martin # iwconfig wlan0 essid off
    root /home/martin # iwconfig wlan0 essid Hochelaga
    root /home/martin # iwconfig wlan0
    wlan0 IEEE 802.11bgn ESSID:"Hochelaga"
    Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
    Retry long limit:7 RTS thr:off Fragment thr:off
    Encryption key:off
    Power Management:on
    I feel as if I'm missing something obvious, yet I've been trying for a long time and I didn't find any solution. Can someone help me in here?
    Here's is my video card information.
    root /home/martin # lspci | grep Wireless
    04:00.0 Network controller: Atheros Communications Inc. AR9285 Wireless Network Adapter (PCI-Express) (rev 01)
    Last edited by mFixman (2012-04-14 03:24:25)

    skunktrader wrote:The ath9k driver is broken in 3.3.1 - either wait for 3.3.2 (a few days) or downgrade.  Search the forum -- there are MANY threads with workarounds
    Indeed, that was the problem.

  • [solved] Only gibberish after boot on my netbook

    Hi all,
    I've installed Arch on my netbook (Acer Aspire ES1-11M-C56A) and everything went pretty smoothly until the first boot.
    Here is some images of my boot sequence in chronological order:
    https://www.dropbox.com/s/z2pgif6pr1327 … 8.jpg?dl=0
    https://www.dropbox.com/s/l7lo3f9qymgoa … 4.jpg?dl=0
    https://www.dropbox.com/s/eyk6ws374ytz0 … 5.jpg?dl=0
    https://www.dropbox.com/s/y5j93qjfts4zf … 1.jpg?dl=0
    The last one is the problematic one: It's only gibberish... When I press keys, I do see something happening, I just cant read anything...
    Two things I've already tried:
    Before I installed Arch onto the netbook, I ran Arch from my USB Stick and it worked fine.
    Secondly, since it ran finde from the stick, I checked the kernel boot line via dmesg | grep command after booting from the stick but it looks pretty much the same as the one in GRUB when booting from the netbook itself. It has the options rw and quite. I already tested inserting nomodeset in there, but that didn't help...
    Any help highly appriciated.... :-/
    Fabian
    Last edited by Dunkit (2015-05-01 10:01:34)

    Sorry, I already posted my last answer before I read your post...
    I do have an intel video chip ( it's onboard I suppose, lspci says 'VGA compatible Controller: Intel Corporation Atom PRocessor Z36xxx/Z37xxx Series Graphics & Display) and I installed the xf86-video-intel  for that.
    dmesg only shows some errors that seem to be related to the fact that I'm using eMMc storage:
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.17.2-1-ARCH (builduser@thomas) (gcc version 4.9.1 20140903 (prerelease) (GCC) ) #1 SMP PREEMPT Thu Oct 30 20:49:39 CET 2014
    [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=153b6eca-4da3-4eba-9bfe-82d306cb78e7 rw quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009e7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009e800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001effffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000001f000000-0x000000001f0fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000001f100000-0x000000001fffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000020000000-0x00000000200fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000020100000-0x00000000781aefff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000781af000-0x00000000787aefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000787af000-0x00000000788aefff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000788af000-0x00000000788eefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000788ef000-0x00000000794c5fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000794c6000-0x0000000079dc5fff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x0000000079dc6000-0x0000000079ffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000007a000000-0x000000007a7fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x000000007ae00000-0x000000007fffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000e3ffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed01000-0x00000000fed01fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed03000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed08000-0x00000000fed08fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed0c000-0x00000000fed0ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1cfff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fef00000-0x00000000feffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ffc00000-0x00000000ffffffff] reserved
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Acer Aspire ES1-111M/R2, BIOS V1.03 07/22/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x7a000 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0FFC00000 mask FFFC00000 write-protect
    [ 0.000000] 1 base 000000000 mask F80000000 write-back
    [ 0.000000] 2 base 07C000000 mask FFC000000 uncachable
    [ 0.000000] 3 base 07B000000 mask FFF000000 uncachable
    [ 0.000000] 4 base 07AE00000 mask FFFE00000 uncachable
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 24576
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b2f000, 0x01b2ffff] PGTABLE
    [ 0.000000] BRK [0x01b30000, 0x01b30fff] PGTABLE
    [ 0.000000] BRK [0x01b31000, 0x01b31fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x79e00000-0x79ffffff]
    [ 0.000000] [mem 0x79e00000-0x79ffffff] page 2M
    [ 0.000000] BRK [0x01b32000, 0x01b32fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x78000000-0x781aefff]
    [ 0.000000] [mem 0x78000000-0x781aefff] page 4k
    [ 0.000000] BRK [0x01b33000, 0x01b33fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x788ef000-0x794c5fff]
    [ 0.000000] [mem 0x788ef000-0x789fffff] page 4k
    [ 0.000000] [mem 0x78a00000-0x793fffff] page 2M
    [ 0.000000] [mem 0x79400000-0x794c5fff] page 4k
    [ 0.000000] BRK [0x01b34000, 0x01b34fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x79dc6000-0x79dfffff]
    [ 0.000000] [mem 0x79dc6000-0x79dfffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0x1effffff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x1effffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x1f100000-0x1fffffff]
    [ 0.000000] [mem 0x1f100000-0x1f1fffff] page 4k
    [ 0.000000] [mem 0x1f200000-0x1fffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x20100000-0x77ffffff]
    [ 0.000000] [mem 0x20100000-0x201fffff] page 4k
    [ 0.000000] [mem 0x20200000-0x77ffffff] page 2M
    [ 0.000000] RAMDISK: [mem 0x379c2000-0x37cd8fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000FE020 000024 (v02 ACRSYS)
    [ 0.000000] ACPI: XSDT 0x00000000788EE120 0000AC (v01 ACRSYS ACRPRDCT 00000003 01000013)
    [ 0.000000] ACPI: FACP 0x00000000788EB000 00010C (v05 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: DSDT 0x00000000788DD000 008EEF (v02 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: FACS 0x0000000078878000 000040
    [ 0.000000] ACPI: UEFI 0x00000000788ED000 000236 (v01 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [ 0.000000] ACPI: MSDM 0x00000000788EC000 000055 (v03 ACRSYS ACRPRDCT 00000001 1025 00040000)
    [ 0.000000] ACPI: HPET 0x00000000788EA000 000038 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: LPIT 0x00000000788E9000 000104 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: APIC 0x00000000788E8000 000084 (v03 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: MCFG 0x00000000788E7000 00003C (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788E6000 000581 (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788DB000 00138A (v01 ACRSYS ACRPRDCT 00000003 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788DA000 000763 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788D9000 000290 (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788D8000 00017A (v01 ACRSYS ACRPRDCT 00003000 1025 00040000)
    [ 0.000000] ACPI: UEFI 0x00000000788D7000 000042 (v01 ACRSYS ACRPRDCT 00000000 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788D3000 00305B (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
    [ 0.000000] ACPI: CSRT 0x00000000788D2000 00014C (v00 ACRSYS ACRPRDCT 00000005 1025 00040000)
    [ 0.000000] ACPI: SSDT 0x00000000788D1000 0003E6 (v01 ACRSYS ACRPRDCT 00001000 1025 00040000)
    [ 0.000000] ACPI: FPDT 0x00000000788D0000 000044 (v01 ACRSYS ACRPRDCT 00000002 1025 00040000)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x0000000079ffffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x79ffffff]
    [ 0.000000] NODE_DATA [mem 0x79ff8000-0x79ffbfff]
    [ 0.000000] [ffffea0000000000-ffffea0001ffffff] PMD -> [ffff880076000000-ffff880077ffffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal empty
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009dfff]
    [ 0.000000] node 0: [mem 0x00100000-0x1effffff]
    [ 0.000000] node 0: [mem 0x1f100000-0x1fffffff]
    [ 0.000000] node 0: [mem 0x20100000-0x781aefff]
    [ 0.000000] node 0: [mem 0x788ef000-0x794c5fff]
    [ 0.000000] node 0: [mem 0x79dc6000-0x79ffffff]
    [ 0.000000] On node 0 totalpages: 494941
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3997 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 7744 pages used for memmap
    [ 0.000000] DMA32 zone: 490944 pages, LIFO batch:31
    [ 0.000000] x86/hpet: Will disable the HPET for this platform because it's not reliable
    [ 0.000000] Reserving Intel graphics stolen memory at 0x7b000000-0x7effffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x408
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x04] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x06] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high level lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x02] high level lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x03] high level lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x04] high level lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-86
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 4 CPUs, 2 hotplug CPUs
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x1f000000-0x1f0fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x20000000-0x200fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x781af000-0x787aefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x787af000-0x788aefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x788af000-0x788eefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x794c6000-0x79dc5fff]
    [ 0.000000] e820: [mem 0x80000000-0xdfffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:4 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff880079200000 s86848 r8192 d23744 u524288
    [ 0.000000] pcpu-alloc: s86848 r8192 d23744 u524288 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3
    [ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 487112
    [ 0.000000] Policy zone: DMA32
    [ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=153b6eca-4da3-4eba-9bfe-82d306cb78e7 rw quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 1931524K/1979764K available (5381K kernel code, 909K rwdata, 1712K rodata, 1140K init, 1176K bss, 48240K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=4.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
    [ 0.000000] NR_IRQS:8448 nr_irqs:1024 0
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 8388608 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] Maximum core-clock to bus-clock ratio: 0x1a
    [ 0.000000] Resolved frequency ID: 0, frequency: 83200 KHz
    [ 0.000000] TSC runs at 2163200 KHz
    [ 0.000000] lapic_timer_frequency = 277333
    [ 0.000000] tsc: Detected 2163.200 MHz processor
    [ 0.000040] Calibrating delay loop (skipped), value calculated using timer frequency.. 4328.66 BogoMIPS (lpj=7210666)
    [ 0.000045] pid_max: default: 32768 minimum: 301
    [ 0.000061] ACPI: Core revision 20140724
    [ 0.020950] ACPI: All ACPI Tables successfully acquired
    [ 0.037502] Security Framework initialized
    [ 0.037510] Yama: becoming mindful.
    [ 0.037738] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
    [ 0.038621] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.039038] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.039048] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.039370] Initializing cgroup subsys memory
    [ 0.039383] Initializing cgroup subsys devices
    [ 0.039390] Initializing cgroup subsys freezer
    [ 0.039395] Initializing cgroup subsys net_cls
    [ 0.039400] Initializing cgroup subsys blkio
    [ 0.039426] CPU: Physical Processor ID: 0
    [ 0.039429] CPU: Processor Core ID: 0
    [ 0.039435] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.044212] mce: CPU supports 6 MCE banks
    [ 0.044222] CPU0: Thermal monitoring handled by SMI
    [ 0.044231] Last level iTLB entries: 4KB 48, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 128, 2MB 16, 4MB 16, 1GB 0
    [ 0.044350] Freeing SMP alternatives memory: 20K (ffffffff81a02000 - ffffffff81a07000)
    [ 0.045336] ftrace: allocating 20675 entries in 81 pages
    [ 0.056669] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.089653] smpboot: CPU0: Intel(R) Celeron(R) CPU N2840 @ 2.16GHz (fam: 06, model: 37, stepping: 08)
    [ 0.089679] TSC deadline timer enabled
    [ 0.089713] Performance Events: PEBS fmt2+, 8-deep LBR, Silvermont events, full-width counters, Intel PMU driver.
    [ 0.089728] ... version: 3
    [ 0.089730] ... bit width: 40
    [ 0.089732] ... generic registers: 2
    [ 0.089734] ... value mask: 000000ffffffffff
    [ 0.089737] ... max period: 000000ffffffffff
    [ 0.089738] ... fixed-purpose events: 3
    [ 0.089740] ... event mask: 0000000700000003
    [ 0.109818] x86: Booting SMP configuration:
    [ 0.109824] .... node #0, CPUs: #1
    [ 0.125602] CPU1: Thermal monitoring handled by SMI
    [ 0.127775] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.127798] x86: Booted up 1 node, 2 CPUs
    [ 0.127802] smpboot: Total of 2 processors activated (8656.33 BogoMIPS)
    [ 0.128380] devtmpfs: initialized
    [ 0.134353] PM: Registering ACPI NVS region [mem 0x787af000-0x788aefff] (1048576 bytes)
    [ 0.134382] PM: Registering ACPI NVS region [mem 0x794c6000-0x79dc5fff] (9437184 bytes)
    [ 0.136401] pinctrl core: initialized pinctrl subsystem
    [ 0.136470] RTC time: 20:38:52, date: 11/14/14
    [ 0.136681] NET: Registered protocol family 16
    [ 0.136908] cpuidle: using governor ladder
    [ 0.136913] cpuidle: using governor menu
    [ 0.136962] ACPI: bus type PCI registered
    [ 0.136966] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.137094] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xe0000000-0xe3ffffff] (base 0xe0000000)
    [ 0.137099] PCI: MMCONFIG at [mem 0xe0000000-0xe3ffffff] reserved in E820
    [ 0.137280] PCI: Using configuration type 1 for base access
    [ 0.148365] ACPI: Added _OSI(Module Device)
    [ 0.148371] ACPI: Added _OSI(Processor Device)
    [ 0.148373] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.148376] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.182017] ACPI: Dynamic OEM Table Load:
    [ 0.182033] ACPI: SSDT 0xFFFF88007566F000 000440 (v01 PmRef Cpu0Ist 00003000 INTL 20130117)
    [ 0.182998] ACPI: Dynamic OEM Table Load:
    [ 0.183012] ACPI: SSDT 0xFFFF88007566F800 000433 (v01 PmRef Cpu0Cst 00003001 INTL 20130117)
    [ 0.191456] ACPI: Dynamic OEM Table Load:
    [ 0.191469] ACPI: SSDT 0xFFFF88007523E600 00015F (v01 PmRef ApIst 00003000 INTL 20130117)
    [ 0.201158] ACPI: Dynamic OEM Table Load:
    [ 0.201171] ACPI: SSDT 0xFFFF880075065D80 00008D (v01 PmRef ApCst 00003000 INTL 20130117)
    [ 0.221110] ACPI: Interpreter enabled
    [ 0.221122] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140724/hwxface-580)
    [ 0.221131] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140724/hwxface-580)
    [ 0.221159] ACPI: (supports S0 S3 S4 S5)
    [ 0.221162] ACPI: Using IOAPIC for interrupt routing
    [ 0.221223] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.224878] ACPI: Power Resource [USBC] (on)
    [ 0.235979] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
    [ 0.235991] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.236183] \_SB_.PCI0:_OSC invalid UUID
    [ 0.236186] _OSC request data:1 1f 0
    [ 0.236194] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.236642] acpi PNP0A08:00: [Firmware Info]: MMCONFIG for domain 0000 [bus 00-3f] only partially covers this bridge
    [ 0.236942] PCI host bridge to bus 0000:00
    [ 0.236949] pci_bus 0000:00: root bus resource [bus 00-ff]
    [ 0.236953] pci_bus 0000:00: root bus resource [io 0x0000-0x006f]
    [ 0.236957] pci_bus 0000:00: root bus resource [io 0x0078-0x0cf7]
    [ 0.236960] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.236964] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.236968] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000dffff]
    [ 0.236971] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000fffff]
    [ 0.236975] pci_bus 0000:00: root bus resource [mem 0x80000000-0x909ffffe]
    [ 0.236987] pci 0000:00:00.0: [8086:0f00] type 00 class 0x060000
    [ 0.237145] pci 0000:00:02.0: [8086:0f31] type 00 class 0x030000
    [ 0.237161] pci 0000:00:02.0: reg 0x10: [mem 0x90000000-0x903fffff]
    [ 0.237174] pci 0000:00:02.0: reg 0x18: [mem 0x80000000-0x8fffffff pref]
    [ 0.237185] pci 0000:00:02.0: reg 0x20: [io 0x2050-0x2057]
    [ 0.237352] pci 0000:00:12.0: [8086:0f16] type 00 class 0x080501
    [ 0.237372] pci 0000:00:12.0: reg 0x10: [mem 0x90920000-0x90920fff]
    [ 0.237384] pci 0000:00:12.0: reg 0x14: [mem 0x9091f000-0x9091ffff]
    [ 0.237451] pci 0000:00:12.0: PME# supported from D0 D3hot
    [ 0.237582] pci 0000:00:14.0: [8086:0f35] type 00 class 0x0c0330
    [ 0.237604] pci 0000:00:14.0: reg 0x10: [mem 0x90900000-0x9090ffff 64bit]
    [ 0.237664] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.237767] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.237842] pci 0000:00:17.0: [8086:0f50] type 00 class 0x080501
    [ 0.237862] pci 0000:00:17.0: reg 0x10: [mem 0x9091d000-0x9091dfff]
    [ 0.237874] pci 0000:00:17.0: reg 0x14: [mem 0x9091c000-0x9091cfff]
    [ 0.237941] pci 0000:00:17.0: PME# supported from D0 D3hot
    [ 0.238080] pci 0000:00:1a.0: [8086:0f18] type 00 class 0x108000
    [ 0.238109] pci 0000:00:1a.0: reg 0x10: [mem 0x90800000-0x908fffff]
    [ 0.238125] pci 0000:00:1a.0: reg 0x14: [mem 0x90700000-0x907fffff]
    [ 0.238234] pci 0000:00:1a.0: PME# supported from D0 D3hot
    [ 0.238369] pci 0000:00:1b.0: [8086:0f04] type 00 class 0x040300
    [ 0.238395] pci 0000:00:1b.0: reg 0x10: [mem 0x90910000-0x90913fff 64bit]
    [ 0.238467] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.238595] pci 0000:00:1c.0: [8086:0f48] type 01 class 0x060400
    [ 0.238661] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.238730] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.238805] pci 0000:00:1c.1: [8086:0f4a] type 01 class 0x060400
    [ 0.238869] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
    [ 0.238938] pci 0000:00:1c.1: System wakeup disabled by ACPI
    [ 0.239009] pci 0000:00:1c.2: [8086:0f4c] type 01 class 0x060400
    [ 0.239073] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.239142] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.239220] pci 0000:00:1f.0: [8086:0f1c] type 00 class 0x060100
    [ 0.239413] pci 0000:00:1f.3: [8086:0f12] type 00 class 0x0c0500
    [ 0.239450] pci 0000:00:1f.3: reg 0x10: [mem 0x90918000-0x9091801f]
    [ 0.239523] pci 0000:00:1f.3: reg 0x20: [io 0x2000-0x201f]
    [ 0.239806] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.239939] pci 0000:02:00.0: [14e4:4365] type 00 class 0x028000
    [ 0.239969] pci 0000:02:00.0: reg 0x10: [mem 0x90600000-0x90607fff 64bit]
    [ 0.240106] pci 0000:02:00.0: supports D1 D2
    [ 0.240109] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.240155] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.244425] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.244433] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
    [ 0.244537] pci 0000:03:00.0: [10ec:8168] type 00 class 0x020000
    [ 0.244559] pci 0000:03:00.0: reg 0x10: [io 0x1000-0x10ff]
    [ 0.244589] pci 0000:03:00.0: reg 0x18: [mem 0x90500000-0x90500fff 64bit]
    [ 0.244609] pci 0000:03:00.0: reg 0x20: [mem 0x90400000-0x90403fff 64bit pref]
    [ 0.244701] pci 0000:03:00.0: supports D1 D2
    [ 0.244704] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.244753] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.251067] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.251073] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.251079] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
    [ 0.251085] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
    [ 0.251926] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [ 0.252051] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.252168] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.252284] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.252400] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.252515] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.252630] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.252746] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *7
    [ 0.255427] ACPI: Enabled 4 GPEs in block 00 to 3F
    [ 0.255679] ACPI : EC: GPE = 0x18, I/O: command/status = 0x66, data = 0x62
    [ 0.255890] vgaarb: setting as boot device: PCI:0000:00:02.0
    [ 0.255894] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.255900] vgaarb: loaded
    [ 0.255902] vgaarb: bridge control possible 0000:00:02.0
    [ 0.255981] PCI: Using ACPI for IRQ routing
    [ 0.257377] PCI: pci_cache_line_size set to 64 bytes
    [ 0.257448] e820: reserve RAM buffer [mem 0x0009e800-0x0009ffff]
    [ 0.257451] e820: reserve RAM buffer [mem 0x1f000000-0x1fffffff]
    [ 0.257454] e820: reserve RAM buffer [mem 0x781af000-0x7bffffff]
    [ 0.257457] e820: reserve RAM buffer [mem 0x794c6000-0x7bffffff]
    [ 0.257460] e820: reserve RAM buffer [mem 0x7a000000-0x7bffffff]
    [ 0.257646] NetLabel: Initializing
    [ 0.257649] NetLabel: domain hash size = 128
    [ 0.257651] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.257674] NetLabel: unlabeled traffic allowed by default
    [ 0.257740] Switched to clocksource refined-jiffies
    [ 0.266257] pnp: PnP ACPI init
    [ 0.266368] pnp 00:00: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.266512] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.266518] system 00:01: [io 0x0400-0x047f] has been reserved
    [ 0.266522] system 00:01: [io 0x0500-0x05fe] has been reserved
    [ 0.266526] system 00:01: [io 0x0600-0x061f] has been reserved
    [ 0.266531] system 00:01: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.266537] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.266663] pnp 00:02: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.267177] system 00:03: [mem 0xe0000000-0xefffffff] could not be reserved
    [ 0.267183] system 00:03: [mem 0xfed01000-0xfed01fff] has been reserved
    [ 0.267187] system 00:03: [mem 0xfed03000-0xfed03fff] has been reserved
    [ 0.267191] system 00:03: [mem 0xfed04000-0xfed04fff] has been reserved
    [ 0.267196] system 00:03: [mem 0xfed0c000-0xfed0ffff] could not be reserved
    [ 0.267200] system 00:03: [mem 0xfed08000-0xfed08fff] has been reserved
    [ 0.267204] system 00:03: [mem 0xfed1c000-0xfed1cfff] has been reserved
    [ 0.267208] system 00:03: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.267213] system 00:03: [mem 0xfef00000-0xfeffffff] has been reserved
    [ 0.267218] system 00:03: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.268674] pnp: PnP ACPI: found 4 devices
    [ 0.277065] Switched to clocksource acpi_pm
    [ 0.277091] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 01] add_size 1000
    [ 0.277097] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 01] add_size 200000
    [ 0.277102] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 01] add_size 200000
    [ 0.277111] pci 0000:00:1c.1: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.277116] pci 0000:00:1c.1: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.277135] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.277139] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.277144] pci 0000:00:1c.1: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.277148] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.277151] pci 0000:00:1c.1: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.277162] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
    [ 0.277166] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
    [ 0.277176] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
    [ 0.277180] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
    [ 0.277189] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
    [ 0.277193] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
    [ 0.277200] pci 0000:00:1c.0: BAR 13: assigned [io 0x3000-0x3fff]
    [ 0.277205] pci 0000:00:1c.1: BAR 13: assigned [io 0x4000-0x4fff]
    [ 0.277217] pci 0000:00:1c.1: BAR 15: no space for [mem size 0x00200000 64bit pref]
    [ 0.277221] pci 0000:00:1c.1: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
    [ 0.277227] pci 0000:00:1c.0: BAR 14: no space for [mem size 0x00200000]
    [ 0.277231] pci 0000:00:1c.0: BAR 14: failed to assign [mem size 0x00200000]
    [ 0.277240] pci 0000:00:1c.0: BAR 15: no space for [mem size 0x00200000 64bit pref]
    [ 0.277244] pci 0000:00:1c.0: BAR 15: failed to assign [mem size 0x00200000 64bit pref]
    [ 0.277248] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.277252] pci 0000:00:1c.0: bridge window [io 0x3000-0x3fff]
    [ 0.277264] pci 0000:00:1c.1: PCI bridge to [bus 02]
    [ 0.277268] pci 0000:00:1c.1: bridge window [io 0x4000-0x4fff]
    [ 0.277274] pci 0000:00:1c.1: bridge window [mem 0x90600000-0x906fffff]
    [ 0.277283] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.277287] pci 0000:00:1c.2: bridge window [io 0x1000-0x1fff]
    [ 0.277293] pci 0000:00:1c.2: bridge window [mem 0x90500000-0x905fffff]
    [ 0.277298] pci 0000:00:1c.2: bridge window [mem 0x90400000-0x904fffff 64bit pref]
    [ 0.277306] pci_bus 0000:00: resource 4 [io 0x0000-0x006f]
    [ 0.277309] pci_bus 0000:00: resource 5 [io 0x0078-0x0cf7]
    [ 0.277313] pci_bus 0000:00: resource 6 [io 0x0d00-0xffff]
    [ 0.277316] pci_bus 0000:00: resource 7 [mem 0x000a0000-0x000bffff]
    [ 0.277320] pci_bus 0000:00: resource 8 [mem 0x000c0000-0x000dffff]
    [ 0.277323] pci_bus 0000:00: resource 9 [mem 0x000e0000-0x000fffff]
    [ 0.277327] pci_bus 0000:00: resource 10 [mem 0x80000000-0x909ffffe]
    [ 0.277331] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
    [ 0.277335] pci_bus 0000:02: resource 0 [io 0x4000-0x4fff]
    [ 0.277338] pci_bus 0000:02: resource 1 [mem 0x90600000-0x906fffff]
    [ 0.277342] pci_bus 0000:03: resource 0 [io 0x1000-0x1fff]
    [ 0.277345] pci_bus 0000:03: resource 1 [mem 0x90500000-0x905fffff]
    [ 0.277349] pci_bus 0000:03: resource 2 [mem 0x90400000-0x904fffff 64bit pref]
    [ 0.277394] NET: Registered protocol family 2
    [ 0.277708] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
    [ 0.277807] TCP bind hash table entries: 16384 (order: 6, 262144 bytes)
    [ 0.277882] TCP: Hash tables configured (established 16384 bind 16384)
    [ 0.277930] TCP: reno registered
    [ 0.277940] UDP hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.277962] UDP-Lite hash table entries: 1024 (order: 3, 32768 bytes)
    [ 0.278050] NET: Registered protocol family 1
    [ 0.278077] pci 0000:00:02.0: Video device with shadowed ROM
    [ 0.278420] PCI: CLS 64 bytes, default 64
    [ 0.278507] Unpacking initramfs...
    [ 0.363030] Freeing initrd memory: 3164K (ffff8800379c2000 - ffff880037cd9000)
    [ 0.363325] microcode: CPU0 sig=0x30678, pf=0x8, revision=0x824
    [ 0.363342] microcode: CPU1 sig=0x30678, pf=0x8, revision=0x824
    [ 0.363454] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 0.363501] Scanning for low memory corruption every 60 seconds
    [ 0.364076] futex hash table entries: 1024 (order: 4, 65536 bytes)
    [ 0.364106] Initialise system trusted keyring
    [ 0.364623] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.367286] zpool: loaded
    [ 0.367291] zbud: loaded
    [ 0.367570] VFS: Disk quotas dquot_6.5.2
    [ 0.367637] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.367884] msgmni has been set to 3778
    [ 0.367982] Key type big_key registered
    [ 0.368394] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.368491] io scheduler noop registered
    [ 0.368496] io scheduler deadline registered
    [ 0.368553] io scheduler cfq registered (default)
    [ 0.369157] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.369189] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.369267] efifb: probing for efifb
    [ 0.369275] efifb: framebuffer at 0xa0000, mapped to 0xffff8800000a0000, using 64k, total 64k
    [ 0.369278] efifb: mode is 640x480x1, linelength=80, pages=1
    [ 0.369280] efifb: scrolling: redraw
    [ 0.369283] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.371834] Console: switching to colour frame buffer device 80x30
    [ 0.374216] fb0: EFI VGA frame buffer device
    [ 0.374232] intel_idle: MWAIT substates: 0x33000020
    [ 0.374235] intel_idle: v0.4 model 0x37
    [ 0.374238] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.374460] GHES: HEST is not enabled!
    [ 0.374613] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.394909] serial8250: ttyS0 at I/O 0x3f8 (irq = 4, base_baud = 115200) is a 16550A
    [ 0.395990] hpet: number irqs doesn't agree with number of timers
    [ 0.396024] Linux agpgart interface v0.103
    [ 0.396109] rtc_cmos 00:00: RTC can wake from S4
    [ 0.396382] rtc_cmos 00:00: rtc core: registered rtc_cmos as rtc0
    [ 0.396413] rtc_cmos 00:00: alarms up to one month, y3k, 242 bytes nvram
    [ 0.396432] Intel P-state driver initializing.
    [ 0.396709] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.397338] TCP: cubic registered
    [ 0.398118] NET: Registered protocol family 10
    [ 0.399444] NET: Registered protocol family 17
    [ 0.401489] Loading compiled-in X.509 certificates
    [ 0.401523] registered taskstats version 1
    [ 0.402998] Magic number: 6:785:649
    [ 0.403061] acpi LNXCPU:02: hash matches
    [ 0.403367] rtc_cmos 00:00: setting system clock to 2014-11-14 20:38:52 UTC (1415997532)
    [ 0.404025] PM: Hibernation image not present or could not be loaded.
    [ 0.407661] Freeing unused kernel memory: 1140K (ffffffff818e5000 - ffffffff81a02000)
    [ 0.407671] Write protecting the kernel read-only data: 8192k
    [ 0.415930] Freeing unused kernel memory: 752K (ffff880001544000 - ffff880001600000)
    [ 0.419109] Freeing unused kernel memory: 336K (ffff8800017ac000 - ffff880001800000)
    [ 0.434439] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.464489] sdhci: Secure Digital Host Controller Interface driver
    [ 0.464494] sdhci: Copyright(c) Pierre Ossman
    [ 0.471477] i8042: PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
    [ 0.471481] i8042: PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
    [ 0.471995] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.480290] sdhci-pci 0000:00:12.0: SDHCI controller found [8086:0f16] (rev e)
    [ 0.481461] sdhci-pci 0000:00:12.0: No vmmc regulator found
    [ 0.481466] sdhci-pci 0000:00:12.0: No vqmmc regulator found
    [ 0.483289] ACPI: bus type USB registered
    [ 0.483335] usbcore: registered new interface driver usbfs
    [ 0.483355] usbcore: registered new interface driver hub
    [ 0.483418] usbcore: registered new device driver usb
    [ 0.485860] mmc0: SDHCI controller on PCI [0000:00:12.0] using ADMA
    [ 0.485891] sdhci-pci 0000:00:17.0: SDHCI controller found [8086:0f50] (rev e)
    [ 0.487077] sdhci-pci 0000:00:17.0: No vmmc regulator found
    [ 0.487080] sdhci-pci 0000:00:17.0: No vqmmc regulator found
    [ 0.488267] mmc1: SDHCI controller on PCI [0000:00:17.0] using ADMA
    [ 0.500911] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.500924] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.501319] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.501349] xhci_hcd 0000:00:14.0: irq 87 for MSI/MSI-X
    [ 0.501680] hub 1-0:1.0: USB hub found
    [ 0.501699] hub 1-0:1.0: 6 ports detected
    [ 0.502403] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.502411] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.502682] hub 2-0:1.0: USB hub found
    [ 0.502697] hub 2-0:1.0: 1 port detected
    [ 0.536044] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 0.682960] mmc1: BKOPS_EN bit is not set
    [ 0.753714] mmc1: new HS200 MMC card at address 0001
    [ 0.757972] mmcblk0: mmc1:0001 HBG4e 29.1 GiB
    [ 0.758296] mmcblk0boot0: mmc1:0001 HBG4e partition 1 4.00 MiB
    [ 0.758656] mmcblk0boot1: mmc1:0001 HBG4e partition 2 4.00 MiB
    [ 0.759001] mmcblk0rpmb: mmc1:0001 HBG4e partition 3 4.00 MiB
    [ 0.760381] mmcblk0: p1
    [ 0.769458] mmcblk0boot1: unknown partition table
    [ 0.776772] mmcblk0boot0: unknown partition table
    [ 0.861284] usb 1-2: new high-speed USB device number 2 using xhci_hcd
    [ 1.039303] hub 1-2:1.0: USB hub found
    [ 1.039605] hub 1-2:1.0: 4 ports detected
    [ 1.040760] usb: failed to peer 1-2-port1 and usb2-port1 by location (1-2-port1:none) (usb2-port1:usb1-port1)
    [ 1.040784] usb 1-2-port1: failed to peer to usb2-port1 (-16)
    [ 1.040793] usb: port power management may be unreliable
    [ 1.041303] usb: failed to peer 1-2-port2 and usb2-port1 by location (1-2-port2:none) (usb2-port1:usb1-port1)
    [ 1.041322] usb 1-2-port2: failed to peer to usb2-port1 (-16)
    [ 1.041742] usb: failed to peer 1-2-port3 and usb2-port1 by location (1-2-port3:none) (usb2-port1:usb1-port1)
    [ 1.041761] usb 1-2-port3: failed to peer to usb2-port1 (-16)
    [ 1.042168] usb: failed to peer 1-2-port4 and usb2-port1 by location (1-2-port4:none) (usb2-port1:usb1-port1)
    [ 1.042186] usb 1-2-port4: failed to peer to usb2-port1 (-16)
    [ 1.204964] usb 1-4: new high-speed USB device number 3 using xhci_hcd
    [ 1.365057] tsc: Refined TSC clocksource calibration: 2166.666 MHz
    [ 1.458942] usb 1-2.1: new full-speed USB device number 4 using xhci_hcd
    [ 2.365981] Switched to clocksource tsc
    [ 9.024844] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
    [ 9.027472] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
    [ 9.028069] mmcblk0rpmb: retrying using single block read
    [ 9.030203] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.032796] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.035371] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.037958] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.040486] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.043040] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 9.043462] end_request: I/O error, dev mmcblk0rpmb, sector 8064
    [ 9.043805] Buffer I/O error on device mmcblk0rpmb, logical block 1008
    [ 17.277306] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
    [ 17.279940] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
    [ 17.293029] mmcblk0rpmb: retrying using single block read
    [ 17.295226] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.323127] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.351243] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.379502] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.407857] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.436111] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 17.462187] end_request: I/O error, dev mmcblk0rpmb, sector 8064
    [ 17.475265] Buffer I/O error on device mmcblk0rpmb, logical block 1008
    [ 17.568142] sdhci: Timeout waiting for Buffer Read Ready interrupt during tuning procedure, falling back to fixed sampling clock
    [ 17.922112] random: nonblocking pool is initialized
    [ 45.820995] EXT4-fs (mmcblk0p1): 4 orphan inodes deleted
    [ 45.821014] EXT4-fs (mmcblk0p1): recovery complete
    [ 45.839454] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
    [ 46.315355] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
    [ 46.454989] systemd-journald[128]: File /var/log/journal/c1ea0510636b4ead93870d2114f006f5/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 46.469206] EXT4-fs (mmcblk0p1): re-mounted. Opts: data=ordered
    [ 46.543132] systemd-journald[128]: Received request to flush runtime journal from PID 1
    [ 46.757953] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 46.759247] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
    [ 46.759257] ACPI: Power Button [PWRB]
    [ 46.759346] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
    [ 46.759350] ACPI: Sleep Button [SLPB]
    [ 46.759441] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input3
    [ 46.759490] ACPI: Lid Switch [LID]
    [ 46.759576] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
    [ 46.759580] ACPI: Power Button [PWRF]
    [ 46.785055] mei_txe 0000:00:1a.0: irq 88 for MSI/MSI-X
    [ 46.832919] ACPI: AC Adapter [ACAD] (on-line)
    [ 46.845651] wmi: Mapper loaded
    [ 46.852089] dw_dmac INTL9C60:01: DesignWare DMA Controller, 8 channels
    [ 46.878734] snd_hda_intel 0000:00:1b.0: irq 89 for MSI/MSI-X
    [ 46.879800] hidraw: raw HID events driver (C) Jiri Kosina
    [ 46.879829] [drm] Initialized drm 1.1.0 20060810
    [ 46.888955] ACPI: Battery Slot [BAT1] (battery present)
    [ 46.910854] ACPI Warning: SystemIO range 0x0000000000002000-0x000000000000201f conflicts with OpRegion 0x0000000000002000-0x000000000000200f (\_SB_.PCI0.SBUS.SMBI) (20140724/utaddress-258)
    [ 46.910865] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 46.914888] bcma: bus0: Found chip with id 0xA886, rev 0x01 and package 0x08
    [ 46.914912] bcma: bus0: Core 0 found: ChipCommon (manuf 0x4BF, id 0x800, rev 0x28, class 0x0)
    [ 46.914930] bcma: bus0: Core 1 found: IEEE 802.11 (manuf 0x4BF, id 0x812, rev 0x21, class 0x0)
    [ 46.915040] bcma: bus0: Core 2 found: PCIe (manuf 0x4BF, id 0x820, rev 0x16, class 0x0)
    [ 46.915081] bcma: bus0: Core 3 found: UNKNOWN (manuf 0x43B, id 0x368, rev 0x00, class 0x0)
    [ 46.921669] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 46.921694] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 46.929220] r8169 0000:03:00.0: irq 90 for MSI/MSI-X
    [ 46.929504] r8169 0000:03:00.0 eth0: RTL8168g/8111g at 0xffffc90000356000, c4:54:44:c3:00:9c, XID 0c000800 IRQ 90
    [ 46.929508] r8169 0000:03:00.0 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 46.929921] thermal LNXTHERM:00: registered as thermal_zone1
    [ 46.929925] ACPI: Thermal Zone [TZ01] (42 C)
    [ 46.937929] bcma: bus0: Bus registered
    [ 46.944450] [drm] Memory usable by graphics device = 2048M
    [ 46.944457] [drm] Replacing VGA console driver
    [ 46.944463] checking generic (a0000 10000) vs hw (80000000 10000000)
    [ 46.944465] fb: switching to inteldrmfb from EFI VGA
    [ 46.944514] Console: switching to colour dummy device 80x25
    [ 46.946311] i915 0000:00:02.0: irq 91 for MSI/MSI-X
    [ 46.946327] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 46.946330] [drm] Driver supports precise vblank timestamp query.
    [ 47.025611] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 47.066033] [drm] VBT doesn't support DRRS
    [ 47.195396] [drm] GMBUS [i915 gmbus dpc] timed out, falling back to bit banging on pin 4
    [ 47.211039] fbcon: inteldrmfb (fb0) is primary device
    [ 48.893803] Console: switching to colour frame buffer device 170x48
    [ 48.922732] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 48.922746] i915 0000:00:02.0: registered panic notifier
    [ 48.968459] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 48.968951] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input5
    [ 48.969149] [drm] Initialized i915 1.6.0 20140725 for 0000:00:02.0 on minor 0
    [ 55.143879] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
    [ 55.146515] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
    [ 55.146934] mmcblk0rpmb: retrying using single block read
    [ 55.149180] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.151614] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.154086] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.156560] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.159039] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.161459] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 55.161802] end_request: I/O error, dev mmcblk0rpmb, sector 8064
    [ 55.162057] Buffer I/O error on device mmcblk0rpmb, logical block 1008
    [ 63.388980] mmc1: Got data interrupt 0x00000002 even though no data operation was in progress.
    [ 63.391496] mmcblk0rpmb: error -110 transferring data, sector 8064, nr 8, cmd response 0x900, card status 0xb00
    [ 63.391966] mmcblk0rpmb: retrying using single block read
    [ 63.394102] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.396574] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.399050] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.401468] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.403913] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.406388] mmcblk0rpmb: timed out sending r/w cmd command, card status 0x400900
    [ 63.406700] end_request: I/O error, dev mmcblk0rpmb, sector 8064
    [ 63.406951] Buffer I/O error on device mmcblk0rpmb, logical block 1008
    [ 63.423775] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 63.529519] media: Linux media interface: v0.10
    [ 63.580182] Linux video capture interface: v2.00
    [ 63.608499] Bluetooth: Core ver 2.19
    [ 63.608788] NET: Registered protocol family 31
    [ 63.608794] Bluetooth: HCI device and connection manager initialized
    [ 63.608807] Bluetooth: HCI socket layer initialized
    [ 63.608815] Bluetooth: L2CAP socket layer initialized
    [ 63.608833] Bluetooth: SCO socket layer initialized
    [ 63.642483] uvcvideo: Found UVC 1.00 device HD WebCam (04f2:b469)
    [ 63.650153] input: HD WebCam as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.0/input/input7
    [ 63.650314] usbcore: registered new interface driver uvcvideo
    [ 63.650318] USB Video Class driver (1.1.1)
    [ 63.665373] intel_rapl: Found RAPL domain package
    [ 63.665379] intel_rapl: Found RAPL domain core
    [ 63.688550] iTCO_vendor_support: vendor-support=0
    [ 63.701582] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 63.701652] iTCO_wdt: Found a Bay Trail SoC TCO device (Version=3, TCOBASE=0x0460)
    [ 63.701827] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 63.739578] sound hdaudioC0D0: autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
    [ 63.739584] sound hdaudioC0D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 63.739588] sound hdaudioC0D0: hp_outs=1 (0x21/0x0/0x0/0x0/0x0)
    [ 63.739590] sound hdaudioC0D0: mono: mono_out=0x0
    [ 63.739593] sound hdaudioC0D0: inputs:
    [ 63.739596] sound hdaudioC0D0: Mic=0x12
    [ 63.807591] usbcore: registered new interface driver btusb
    [ 63.809964] r8169 0000:03:00.0 enp3s0: renamed from eth0
    [ 63.859693] acer_wmi: Acer Laptop ACPI-WMI Extras
    [ 63.859712] acer_wmi: Function bitmap for Communication Button: 0x801
    [ 63.859861] acer_wmi: Brightness must be controlled by acpi video driver
    [ 63.871050] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 63.873001] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9
    [ 63.875263] acer_wmi: Enabling Launch Manager failed: 0xe4 - 0x0
    [ 63.875363] input: Acer WMI hotkeys as /devices/virtual/input/input10
    [ 63.879763] input: Acer BMA150 accelerometer as /devices/virtual/input/input11
    [ 63.896357] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.904021] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.904883] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.905761] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.906614] i2c_hid i2c-SYN1B7D:01: failed to retrieve report from device.
    [ 63.906794] input: SYN1B7D:01 06CB:2991 UNKNOWN as /devices/platform/80860F41:00/i2c-0/i2c-SYN1B7D:01/0018:06CB:2991.0001/input/input12
    [ 63.907001] hid-multitouch 0018:06CB:2991.0001: input,hidraw0: <UNKNOWN> HID v1.00 Mouse [SYN1B7D:01 06CB:2991] on
    [ 63.967191] mousedev: PS/2 mouse device common for all mice
    [ 64.026205] cfg80211: Calling CRDA to update world regulatory domain
    [ 64.458411] r8169 0000:03:00.0 enp3s0: link down
    [ 64.458485] IPv6: ADDRCONF(NETDEV_UP): enp3s0: link is not ready
    [ 64.458497] r8169 0000:03:00.0 enp3s0: link down
    [ 65.817131] Bluetooth: hci0 command 0x1003 tx timeout
    [ 66.041823] r8169 0000:03:00.0 enp3s0: link up
    [ 66.041860] IPv6: ADDRCONF(NETDEV_CHANGE): enp3s0: link becomes ready
    journalctl -xn gives:
    -- Logs begin at Fr 2014-11-14 20:35:40 CET, end at Fr 2014-11-14 21:40:11 CET. --
    Nov 14 21:40:08 weierstrass systemd[302]: Reached target Timers.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Nov 14 21:40:08 weierstrass systemd[302]: Starting Sockets.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Nov 14 21:40:08 weierstrass systemd[302]: Reached target Sockets.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Nov 14 21:40:08 weierstrass systemd[302]: Starting Basic System.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Nov 14 21:40:08 weierstrass systemd[302]: Reached target Basic System.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Nov 14 21:40:08 weierstrass systemd[302]: Starting Default.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Nov 14 21:40:08 weierstrass systemd[302]: Reached target Default.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Nov 14 21:40:08 weierstrass systemd[302]: Startup finished in 29ms.
    -- Subject: System start-up is now complete
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- All system services necessary queued for starting at boot have been
    -- successfully started. Note that this does not mean that the machine is
    -- now idle as services might still be busy with completing start-up.
    -- Kernel start-up required KERNEL_USEC microseconds.
    -- Initial RAM disk start-up required INITRD_USEC microseconds.
    -- Userspace start-up required 29200 microseconds.
    Nov 14 21:40:08 weierstrass login[179]: ROOT LOGIN ON tty1
    Nov 14 21:40:11 weierstrass dhcpcd[301]: enp3s0: no IPv6 Routers available
    ... which looks pretty fine to me...
    No, no other issues so far.
    How could I find out if some autologin is set up?

  • [solved] ifplugd; systemd, net-auto-wired: annoying beep

    Hello everyone!
    I experience annoying pc speaker beeps whenever the net-auto-wired service is getting started or stopped, e.g. on every boot or shutdown.
    I've already tried various ways to mute the pc speaker:
    "xset -b" in ~/.xinitrc
    blacklisting pcspkr module
    "setterm -blength 0" in /etc/profile
    It doesn't work.
    The following log corresponds to stopping and then re-starting the net-auto-wired service after having booted the system.
    Nov 24 11:34:19 virtus sudo[2298]: freddy : TTY=pts/0 ; PWD=/home/freddy ; USER=root ; COMMAND=/usr/bin/systemctl stop net-auto-wired.service
    Nov 24 11:34:19 virtus sudo[2298]: pam_unix(sudo:session): session opened for user root by (uid=0)
    Nov 24 11:34:19 virtus systemd[1]: Stopping Provides automatic netcfg wired connection...
    Nov 24 11:34:19 virtus dhcpcd[2320]: sending signal 1 to pid 1819
    Nov 24 11:34:19 virtus dhcpcd[1819]: received SIGHUP, releasing
    Nov 24 11:34:19 virtus dhcpcd[1819]: eth0: releasing lease of 85.170.167.0
    Nov 24 11:34:19 virtus dhcpcd[2320]: waiting for pid 1819 to exit
    Nov 24 11:34:19 virtus dhcpcd[1819]: eth0: removing interface
    Nov 24 11:34:19 virtus netcfg[2301]: :: ethernet-dhcp down [done]
    Nov 24 11:34:20 virtus kernel: e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
    Nov 24 11:34:20 virtus ifplugd[1675]: Link beat lost.
    Nov 24 11:34:20 virtus kernel: e1000e 0000:00:19.0: irq 47 for MSI/MSI-X
    Nov 24 11:34:20 virtus ifplugd[1675]: Executing '/etc/ifplugd/netcfg.action eth0 down'.
    Nov 24 11:34:20 virtus ifplugd[1675]: Program execution failed, return value is 1.
    Nov 24 11:34:20 virtus ifplugd[1675]: Exiting.
    Nov 24 11:34:20 virtus systemd[1]: Stopped Provides automatic netcfg wired connection.
    Nov 24 11:34:20 virtus sudo[2298]: pam_unix(sudo:session): session closed for user root
    Nov 24 11:34:21 virtus kernel: e1000e: eth0 NIC Link is Up 100 Mbps Full Duplex, Flow Control: Rx/Tx
    Nov 24 11:34:21 virtus kernel: e1000e 0000:00:19.0: eth0: 10/100 speed: disabling TSO
    Nov 24 11:34:23 virtus sudo[2365]: freddy : TTY=pts/0 ; PWD=/home/freddy ; USER=root ; COMMAND=/usr/bin/journalctl
    Nov 24 11:34:23 virtus sudo[2365]: pam_unix(sudo:session): session opened for user root by (uid=0)
    Nov 24 11:35:58 virtus sudo[2365]: pam_unix(sudo:session): session closed for user root
    Nov 24 11:36:03 virtus sudo[2469]: freddy : TTY=pts/0 ; PWD=/home/freddy ; USER=root ; COMMAND=/usr/bin/systemctl start net-auto-wired.service
    Nov 24 11:36:03 virtus sudo[2469]: pam_unix(sudo:session): session opened for user root by (uid=0)
    Nov 24 11:36:03 virtus systemd[1]: Starting Provides automatic netcfg wired connection...
    Nov 24 11:36:03 virtus systemd[1]: Started Provides automatic netcfg wired connection.
    Nov 24 11:36:03 virtus sudo[2469]: pam_unix(sudo:session): session closed for user root
    Nov 24 11:36:03 virtus ifplugd[2472]: ifplugd 0.28 initializing.
    Nov 24 11:36:03 virtus ifplugd[2472]: Using interface eth0/00:1C:25:9F:3E:24 with driver <e1000e> (version: 2.0.0-k)
    Nov 24 11:36:03 virtus ifplugd[2472]: Using detection mode: SIOCETHTOOL
    Nov 24 11:36:03 virtus ifplugd[2472]: Initialization complete, link beat detected.
    Nov 24 11:36:03 virtus ifplugd[2472]: Executing '/etc/ifplugd/netcfg.action eth0 up'.
    Nov 24 11:36:03 virtus ifplugd[2472]: client: up
    Nov 24 11:36:03 virtus ifplugd[2472]: client: loading wireless-profile1
    Nov 24 11:36:03 virtus ifplugd[2472]: client: loading wireless-profile2
    Nov 24 11:36:03 virtus ifplugd[2472]: client: loading ethernet-dhcp
    Nov 24 11:36:03 virtus dhcpcd[2505]: version 5.6.3 starting
    Nov 24 11:36:03 virtus dhcpcd[2505]: all: configured as a router, not a host
    Nov 24 11:36:03 virtus dhcpcd[2505]: eth0: broadcasting for a lease
    Nov 24 11:36:04 virtus dhcpcd[2505]: eth0: offered 85.170.167.0 from 212.198.0.161
    Nov 24 11:36:04 virtus dhcpcd[2505]: eth0: ignoring offer of 85.170.167.70 from 212.198.0.162
    Nov 24 11:36:04 virtus dhcpcd[2505]: eth0: acknowledged 85.170.167.0 from 212.198.0.161
    Nov 24 11:36:04 virtus dhcpcd[2505]: eth0: checking for 85.170.167.0
    Nov 24 11:36:10 virtus dhcpcd[2505]: eth0: leased 85.170.167.0 for 14400 seconds
    Nov 24 11:36:10 virtus dhcpcd[2505]: forked to background, child pid 2603
    Nov 24 11:36:10 virtus ifplugd[2472]: client: :: ethernet-dhcp up [done]
    Nov 24 11:36:10 virtus ifplugd[2472]: Program executed successfully.
    This did not happen before using systemd, everything was fine back then.
    Any ideas? Thanks!
    Edit: Hardware is Lenovo T400.
    Last edited by ball (2013-01-23 22:45:20)

    @sie: thank you very much! This is it! Silence, finally!
    But instead of editing the .service file changing the ifplugd configuration is better IMHO. Otherwise the change won't survive an upgrade of netcfg. So I edited /etc/ifplugd/ifplugd.conf and added the "-b" flag to ARGS.
    EDIT: I just realized that adding "-b" to the default ARGS of ifplugd does not have the desired effect, the problem persists. So why is this the case? Do the flags which are employed in the .service file bypass the default ifplugd configuration? Or is this my very own user misconception? I did RTFM, though...
    Currently this is my /usr/lib/systemd/system/net-auto-wired.service:
    [Unit]
    Description=Provides automatic netcfg wired connection
    [Service]
    EnvironmentFile=/etc/conf.d/netcfg
    ExecStart=/usr/bin/ifplugd -i $WIRED_INTERFACE -r /etc/ifplugd/netcfg.action -fIns -b
    ExecStop=/usr/bin/netcfg iface-down $WIRED_INTERFACE
    [Install]
    WantedBy=multi-user.target
    If this issue really has to be addressed in the .service file, we should file a bug report/feature request.
    Last edited by ball (2013-01-23 18:13:13)

  • [SOLVED] Can't boot from LUKS - No key available with this passphrase

    The problem
    Latest kbd package responsible for your keyboard layout may break some LUKS installs depending on the password used, as there are some keymaps which are broken, resulting in the user not being able to enter the password correctly.
    Relevant bug report: https://bugs.archlinux.org/task/36689
    The fix
    Find an old live image with the old kbd package (I had success with 2012.11.01)
    Boot the image
    Change to your preferred keymap using
    loadkeys
    Open your encrypted device with
    cryptsetup luksOpen /path/to/device devicename
    Mount the device and any other relevant mount points (such as /boot) and perform a chroot with
    arch-chroot
    Revert the kbd package. The latest working version is 1.15.5-4. If you didn't clean your cache, you should have a working version under
    /var/cache/pacman/pkg
    If not, either try finding the package manually, or build it using ABS.
    Once the package is installed, confirm the keymap works by running loadkeys again and entering any keys that may have been problematic.
    While still under chroot, rebuild the initramfs with
    mkinitcpio -p linux
    If this goes without any problems, you should be able to reboot to a working system.
    Ever since I updated my system about a week ago, I cannot boot it anymore.
    The root filesystem encrypted and since the update, I can't unlock it on boot anymore. Typing in my passphrase, I get the error No key available with this passphrase.
    One thing that comes to mind is that the passphrase contains non-standard characters (Š for example), and I'm not sure if that's what might be causing problems?
    Any ideas or tips on how can I debug this?
    Another thing I've noticed is that if I drop into a recovery shell, the special characters on my keyboard aren't properly mapped. Š will print out C and it's hexdump seems invalid.
    Edit:
    Just noticed this thread: https://bbs.archlinux.org/viewtopic.php?id=148562
    Will try to unlock it from a live distro. It doesn't seem to want to unlock with Arch live as the keymap seems wrong there as well.
    Last edited by Mr. Pjer (2013-09-07 00:19:27)

    Here's the list. The update was done on 31/8.
    [2013-08-31 18:14] [PACMAN] Running 'pacman -Syu'
    [2013-08-31 18:14] [PACMAN] synchronizing package lists
    [2013-08-31 18:14] [PACMAN] starting full system upgrade
    [2013-08-31 18:34] [PACMAN] removed python2-distribute (0.6.45-1)
    [2013-08-31 18:34] [PACMAN] removed python-distribute (0.6.45-1)
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Appending keys from archlinux.gpg...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: 3 marginal(s) needed, 1 complete(s) needed, PGP trust model
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: depth: 0 valid: 1 signed: 5 trust: 0-, 0q, 0n, 0m, 0f, 1u
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: depth: 1 valid: 5 signed: 65 trust: 0-, 0q, 0n, 5m, 0f, 0u
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: depth: 2 valid: 65 signed: 3 trust: 65-, 0q, 0n, 0m, 0f, 0u
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2014-01-22
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Locally signing trusted keys in keyring...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key 0E8B644079F599DFC1DDC3973348882F6AC6A4C2...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key 684148BB25B49E986A4944C55184252D824B18E8...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key 44D4A033AC140143927397D47EFD567D4C7EA887...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key 27FFC4769E19F096D41D9265A04F9397CDFD6BB0...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Locally signing key AB19265E5D7D20687D303246BA1DFB64FFF979E7...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Importing owner trust values...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Disabling revoked keys in keyring...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] -> Disabling key BC1FBE4D2826A0B51E47ED62E2539214C6C11350...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Updating trust database...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] gpg: next trustdb check due at 2014-01-22
    [2013-08-31 18:34] [PACMAN] upgraded archlinux-keyring (20130525-2 -> 20130818-1)
    [2013-08-31 18:34] [ALPM-SCRIPTLET]
    [2013-08-31 18:34] [ALPM-SCRIPTLET] NOTE for argyllcms:
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ----
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> The documentaion is only available as html!
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> You will find it in /usr/share/argyllcms/doc
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Color charts located in /usr/share/argyllcms/ref
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Since release 1.5.0 ColorHug support is enabled by default. The environment variable "ENABLE_COLORHUG" is not longer needed!
    [2013-08-31 18:34] [ALPM-SCRIPTLET] ==> Please add your argyllcms user to plugdev group! <==
    [2013-08-31 18:34] [PACMAN] upgraded argyllcms (1.5.1-2 -> 1.6.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded linux-api-headers (3.8.4-1 -> 3.10.6-1)
    [2013-08-31 18:34] [ALPM-SCRIPTLET] Generating locales...
    [2013-08-31 18:34] [ALPM-SCRIPTLET] en_US.UTF-8... done
    [2013-08-31 18:34] [ALPM-SCRIPTLET] hr_HR.UTF-8... done
    [2013-08-31 18:34] [ALPM-SCRIPTLET] Generation complete.
    [2013-08-31 18:34] [PACMAN] upgraded glibc (2.17-6 -> 2.18-3)
    [2013-08-31 18:34] [PACMAN] upgraded bash (4.2.045-4 -> 4.2.045-5)
    [2013-08-31 18:34] [PACMAN] upgraded binutils (2.23.2-2 -> 2.23.2-3)
    [2013-08-31 18:34] [PACMAN] upgraded boost-libs (1.54.0-2 -> 1.54.0-3)
    [2013-08-31 18:34] [PACMAN] upgraded ca-certificates-java (20121112+nmu2-2 -> 20130815-1)
    [2013-08-31 18:34] [PACMAN] upgraded glib2 (2.36.3-3 -> 2.36.4-1)
    [2013-08-31 18:34] [PACMAN] upgraded wayland (1.2.0-1 -> 1.2.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded gcc-libs (4.8.1-2 -> 4.8.1-3)
    [2013-08-31 18:34] [PACMAN] installed elfutils (0.155-1)
    [2013-08-31 18:34] [PACMAN] installed llvm-libs (3.3-1)
    [2013-08-31 18:34] [PACMAN] upgraded mesa (9.1.6-1 -> 9.2.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded mesa-libgl (9.1.6-1 -> 9.2.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded cairo (1.12.14-4 -> 1.12.16-1)
    [2013-08-31 18:34] [PACMAN] upgraded ttf-dejavu (2.33-4 -> 2.34-1)
    [2013-08-31 18:34] [PACMAN] upgraded chromium (28.0.1500.95-1 -> 29.0.1547.62-1)
    [2013-08-31 18:34] [PACMAN] upgraded curl (7.31.0-1 -> 7.32.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded libarchive (3.1.2-1 -> 3.1.2-2)
    [2013-08-31 18:34] [PACMAN] upgraded cmake (2.8.11.2-1 -> 2.8.11.2-2)
    [2013-08-31 18:34] [PACMAN] upgraded cpupower (3.10-1 -> 3.10-2)
    [2013-08-31 18:34] [PACMAN] upgraded device-mapper (2.02.98-4 -> 2.02.100-1)
    [2013-08-31 18:34] [PACMAN] upgraded cryptsetup (1.6.1-2 -> 1.6.2-1)
    [2013-08-31 18:34] [PACMAN] upgraded poppler (0.24.0-1 -> 0.24.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded cups-filters (1.0.35-4 -> 1.0.37-1)
    [2013-08-31 18:34] [PACMAN] installed python2-setuptools (1.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded deluge (1.3.6-1 -> 1.3.6-3)
    [2013-08-31 18:34] [PACMAN] upgraded dhcpcd (6.0.4-1 -> 6.0.5-1)
    [2013-08-31 18:34] [PACMAN] upgraded python2-numpy (1.7.1-1 -> 1.7.1-2)
    [2013-08-31 18:34] [PACMAN] upgraded dispcalgui (1.2.7.0-1 -> 1.2.7.0-2)
    [2013-08-31 18:34] [PACMAN] upgraded ffmpeg (1:2.0-2 -> 1:2.0.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded gtk3 (3.8.2-1 -> 3.8.4-1)
    [2013-08-31 18:34] [PACMAN] upgraded file-roller (3.8.3-1 -> 3.8.4-1)
    [2013-08-31 18:34] [PACMAN] upgraded gcc (4.8.1-2 -> 4.8.1-3)
    [2013-08-31 18:34] [PACMAN] upgraded gettext (0.18.3-1 -> 0.18.3.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded libtiff (4.0.3-2 -> 4.0.3-3)
    [2013-08-31 18:34] [PACMAN] upgraded ghostscript (9.07-2 -> 9.09-1)
    [2013-08-31 18:34] [PACMAN] upgraded librsvg (2.37.0-2 -> 1:2.37.0-1)
    [2013-08-31 18:34] [PACMAN] upgraded libmng (1.0.10-4 -> 2.0.2-2)
    [2013-08-31 18:34] [PACMAN] upgraded gimp (2.8.6-1 -> 2.8.6-2)
    [2013-08-31 18:34] [PACMAN] upgraded perl (5.18.0-1 -> 5.18.1-1)
    [2013-08-31 18:34] [PACMAN] upgraded perl-error (0.17020-1 -> 0.17021-1)
    [2013-08-31 18:34] [PACMAN] upgraded git (1.8.3.4-1 -> 1.8.4-1)
    [2013-08-31 18:34] [PACMAN] upgraded glew (1.10.0-1 -> 1.10.0-2)
    [2013-08-31 18:34] [PACMAN] upgraded glfw (3.0.1-2 -> 3.0.2-1)
    [2013-08-31 18:34] [PACMAN] upgraded glm (0.9.4.4-1 -> 0.9.4.5-1)
    [2013-08-31 18:34] [PACMAN] upgraded gnupg (2.0.20-2 -> 2.0.21-1)
    [2013-08-31 18:34] [PACMAN] upgraded gpgme (1.4.2-2 -> 1.4.3-1)
    [2013-08-31 18:35] [PACMAN] upgraded grails (2.2.3-1 -> 2.2.4-1)
    [2013-08-31 18:35] [PACMAN] upgraded groff (1.22.2-3 -> 1.22.2-5)
    [2013-08-31 18:35] [PACMAN] upgraded gstreamer (1.0.9-1 -> 1.0.10-1)
    [2013-08-31 18:35] [PACMAN] upgraded gst-plugins-base-libs (1.0.9-1 -> 1.0.10-1)
    [2013-08-31 18:35] [PACMAN] upgraded imagemagick (6.8.6.4-1 -> 6.8.6.9-1)
    [2013-08-31 18:35] [PACMAN] upgraded intel-dri (9.1.6-1 -> 9.2.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded iputils (20121221-2 -> 20121221-3)
    [2013-08-31 18:35] [PACMAN] upgraded isl (0.12-1 -> 0.12.1-1)
    [2013-08-31 18:35] [PACMAN] upgraded kbd (1.15.5-4 -> 2.0.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded kdelibs (4.10.5-2 -> 4.11.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded kmod (14-1 -> 15-1)
    [2013-08-31 18:35] [PACMAN] upgraded lib32-glibc (2.17-5 -> 2.18-3)
    [2013-08-31 18:35] [PACMAN] upgraded lib32-gcc-libs (4.8.1-2 -> 4.8.1-3)
    [2013-08-31 18:35] [PACMAN] upgraded libbsd (0.5.2-2 -> 0.6.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded libfm (1.1.1-1 -> 1.1.2-1)
    [2013-08-31 18:35] [PACMAN] upgraded libgdiplus (2.10.9-1 -> 2.10.9-2)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-en-GB (4.0.4-1 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-common (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-base (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-calc (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-draw (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-gnome (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-impress (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-kde4 (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-math (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-postgresql-connector (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-sdk (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-sdk-doc (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libwpd (0.9.6-1 -> 0.9.9-1)
    [2013-08-31 18:35] [PACMAN] upgraded libreoffice-writer (4.0.4-2 -> 4.0.5-1)
    [2013-08-31 18:35] [PACMAN] upgraded libsamplerate (0.1.8-1 -> 0.1.8-2)
    [2013-08-31 18:35] [PACMAN] upgraded libwbclient (4.0.8-1 -> 4.0.9-1)
    [2013-08-31 18:35] [ALPM-SCRIPTLET] >>> Updating module dependencies. Please wait ...
    [2013-08-31 18:35] [ALPM-SCRIPTLET] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'default'
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux.img
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [autodetect]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux.img
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Building image from preset: /etc/mkinitcpio.d/linux.preset: 'fallback'
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> -k /boot/vmlinuz-linux -c /etc/mkinitcpio.conf -g /boot/initramfs-linux-fallback.img -S autodetect
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Starting build: 3.10.10-1-ARCH
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [base]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [udev]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [modconf]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [block]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: aic94xx
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: bfa
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> WARNING: Possibly missing firmware for module: smsmdtv
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [keymap]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [encrypt]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [filesystems]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] -> Running build hook: [keyboard]
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Generating module dependencies
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Creating gzip initcpio image: /boot/initramfs-linux-fallback.img
    [2013-08-31 18:35] [ALPM-SCRIPTLET] ==> Image generation successful
    [2013-08-31 18:35] [PACMAN] upgraded linux (3.10.5-1 -> 3.10.10-1)
    [2013-08-31 18:35] [PACMAN] upgraded linux-headers (3.10.5-1 -> 3.10.10-1)
    [2013-08-31 18:35] [PACMAN] upgraded logrotate (3.8.5-1 -> 3.8.6-1)
    [2013-08-31 18:35] [ALPM] warning: /etc/lvm/lvm.conf installed as /etc/lvm/lvm.conf.pacnew
    [2013-08-31 18:35] [PACMAN] upgraded lvm2 (2.02.98-4 -> 2.02.100-1)
    [2013-08-31 18:35] [PACMAN] upgraded maven (3.0.5-1 -> 3.1.0-1)
    [2013-08-31 18:35] [PACMAN] upgraded net-snmp (5.7.2-7 -> 5.7.2-8)
    [2013-08-31 18:36] [PACMAN] upgraded nodejs (0.10.15-1 -> 0.10.17-1)
    [2013-08-31 18:36] [PACMAN] upgraded obex-data-server (0.4.6-7 -> 0.4.6-8)
    [2013-08-31 18:36] [PACMAN] upgraded openresolv (3.5.5-1 -> 3.5.6-1)
    [2013-08-31 18:36] [ALPM] warning: /etc/pacman.d/mirrorlist installed as /etc/pacman.d/mirrorlist.pacnew
    [2013-08-31 18:36] [PACMAN] upgraded pacman-mirrorlist (20130626-1 -> 20130830-1)
    [2013-08-31 18:36] [PACMAN] upgraded pcmanfm (1.1.1-1 -> 1.1.2-1)
    [2013-08-31 18:36] [ALPM] warning: /etc/php/php.ini installed as /etc/php/php.ini.pacnew
    [2013-08-31 18:36] [PACMAN] upgraded php (5.4.17-1 -> 5.5.3-1)
    [2013-08-31 18:36] [PACMAN] upgraded php-pear (5.4.17-1 -> 5.5.3-1)
    [2013-08-31 18:36] [PACMAN] upgraded poppler-glib (0.24.0-1 -> 0.24.1-1)
    [2013-08-31 18:36] [PACMAN] installed python-setuptools (1.0-1)
    [2013-08-31 18:36] [PACMAN] upgraded python-pip (1.4-1 -> 1.4.1-2)
    [2013-08-31 18:36] [PACMAN] upgraded python2-markupsafe (0.18-1 -> 0.18-2)
    [2013-08-31 18:36] [PACMAN] upgraded python2-mako (0.8.1-1 -> 0.8.1-2)
    [2013-08-31 18:36] [PACMAN] upgraded python2-pip (1.4-1 -> 1.4.1-2)
    [2013-08-31 18:36] [PACMAN] upgraded python2-zope-interface (4.0.5-1 -> 4.0.5-2)
    [2013-08-31 18:36] [PACMAN] upgraded sqlite (3.7.17-1 -> 3.8.0.1-1)
    [2013-08-31 18:36] [PACMAN] upgraded qt4 (4.8.5-1 -> 4.8.5-2)
    [2013-08-31 18:36] [PACMAN] upgraded redshift (1.7-6 -> 1.7-7)
    [2013-08-31 18:36] [PACMAN] upgraded reiserfsprogs (3.6.23-1 -> 3.6.24-1)
    [2013-08-31 18:36] [PACMAN] upgraded run-parts (4.3.4-1 -> 4.4-1)
    [2013-08-31 18:36] [PACMAN] upgraded smbclient (4.0.8-1 -> 4.0.9-1)
    [2013-08-31 18:36] [PACMAN] upgraded samba (4.0.8-1 -> 4.0.9-1)
    [2013-08-31 18:36] [PACMAN] upgraded serf (1.2.1-1 -> 1.3.0-1)
    [2013-08-31 18:36] [PACMAN] upgraded smartmontools (6.1-3 -> 6.2-1)
    [2013-08-31 18:36] [PACMAN] upgraded subversion (1.8.1-1 -> 1.8.1-2)
    [2013-08-31 18:36] [PACMAN] upgraded vim-runtime (7.3.1287-1 -> 7.4.0-2)
    [2013-08-31 18:36] [PACMAN] upgraded vim (7.3.1287-1 -> 7.4.0-2)
    [2013-08-31 18:36] [PACMAN] upgraded wicd (1.7.2.4-7 -> 1.7.2.4-9)
    [2013-08-31 18:36] [PACMAN] upgraded wicd-gtk (1.7.2.4-7 -> 1.7.2.4-9)
    [2013-08-31 18:36] [ALPM-SCRIPTLET] >>> This driver now uses SNA as the default acceleration method. You can
    [2013-08-31 18:36] [ALPM-SCRIPTLET] still fall back to UXA if you run into trouble. To do so, save a file
    [2013-08-31 18:36] [ALPM-SCRIPTLET] with the following content as /etc/X11/xorg.conf.d/20-intel.conf :
    [2013-08-31 18:36] [ALPM-SCRIPTLET] Section "Device"
    [2013-08-31 18:36] [ALPM-SCRIPTLET] Identifier "Intel Graphics"
    [2013-08-31 18:36] [ALPM-SCRIPTLET] Driver "intel"
    [2013-08-31 18:36] [ALPM-SCRIPTLET] Option "AccelMethod" "uxa"
    [2013-08-31 18:36] [ALPM-SCRIPTLET] EndSection
    [2013-08-31 18:36] [PACMAN] upgraded xf86-video-intel (2.21.14-1 -> 2.21.15-1)
    [2013-08-31 18:36] [PACMAN] upgraded xorg-xset (1.2.2-2 -> 1.2.3-1)
    I've just tried rebuilding the initramfs. It goes through without errors, but still won't accept my password on boot.

  • [SOLVED] High disk activity after kernel boot

    Hi,
    after kernel loading (just before getty starts) i notice extremely high disk activity for ~20 seconds for no reason. I think that it is something related to systemd and mount services.
    When i set rootfs to read-only in syslinux kernel parameters then the system starts normally without delay. So, i think that something is constantly writing to (or checking?) my hard disk right after boot sequence.
    I'm using  kernel 3.7.9-1-ARCH.
    $ systemd --version
    systemd 197
    +PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ
    $ systemd-analyze
    Startup finished in 3121ms (kernel) + 6238ms (userspace) = 9360ms
    $ systemd-analyze blame
    1289ms NetworkManager.service
    1173ms colord.service
    812ms systemd-logind.service
    722ms systemd-binfmt.service
    660ms systemd-udevd.service
    639ms systemd-sysctl.service
    314ms tmp.mount
    305ms systemd-remount-fs.service
    300ms upower.service
    219ms systemd-tmpfiles-setup.service
    168ms polkit.service
    160ms dev-sda2.swap
    156ms systemd-vconsole-setup.service
    129ms wpa_supplicant.service
    125ms dev-mqueue.mount
    121ms dev-hugepages.mount
    108ms systemd-udev-trigger.service
    101ms verynice.service
    59ms systemd-user-sessions.service
    48ms boot.mount
    47ms hpfall.service
    46ms home.mount
    43ms cpupower.service
    27ms sys-kernel-config.mount
    4ms proc-sys-fs-binfmt_misc.mount
    Syslinux kernel parameters (either ro or rw has the same result)
    APPEND root=/dev/sda3 rw nomodeset vga=current clocksource=acpi_pm libahci.ignore_sss=1
    Tried also with fsck hook and removing sda3 from fstab
    APPEND root=/dev/sda3 rw nomodeset vga=current clocksource=acpi_pm libahci.ignore_sss=1 rootflags=noatime,barrier=0
    my fstab:
    # UUID=925aba97-6805-442b-bb51-3ea6c16a5a86
    /dev/sda3 / ext4 rw,noatime,barrier=0 0 0
    # UUID=dd60df02-7992-43c1-a0e0-79441e23268e
    /dev/sda1 /boot ext4 rw,noatime 0 0
    # UUID=d2621666-f2c5-4f36-8da3-c0f21a23246c
    /dev/sda4 /home ext4 rw,noatime 0 0
    # UUID=3d70bc7d-5b0c-4adc-ba84-f32c9d132bcc
    /dev/sda2 none swap defaults 0 0
    Thanks for your time.
    Last edited by anelehto (2013-02-23 14:27:41)

    It was a problem with preload and its configuration.. I removed it and everything went back to normal!

  • [SOLVED] systemd/cron as user: timer doesn't start after boot

    Hello,
    I've tried to follow the wiki's systemd/cron functionality article to have a systemd service to run hourly.
    Everything seems to be working ok, except that the hourly timer doesn't start automatically : I have to issue a
    systemctl --user timer-hourly.timer start
    command every time I start the machine to get the timer running.
    Can you help me understand what I'm missing to get the (user) timer to start automatically after boot?
    Thanks!
    My setup consists of the following files:
    /home/myuser/.config/systemd/user:
    drwxr-xr-x 2 myuser users 4096 Jun 25 17:30 basic.target.wants/
    -rw-r--r-- 1 myuser users 217 Jun 25 10:08 db_backup.service
    -rw-r--r-- 1 myuser users 232 Jun 25 10:08 test.service
    -rw-r--r-- 1 myuser users 61 Jun 19 12:14 timer-hourly.target
    drwxr-xr-x 2 myuser users 4096 Jun 25 10:10 timer-hourly.target.wants/
    -rw-r--r-- 1 myuser users 134 Jun 19 12:14 timer-hourly.timer
    /home/myuser/.config/systemd/user/basic.target.wants/:
    lrwxrwxrwx 1 myuser users 50 Jun 25 10:08 timer-hourly.timer -> /home/myuser/.config/systemd/user/timer-hourly.timer
    /home/myuser/.config/systemd/user/timer-hourly.target.wants/:
    lrwxrwxrwx 1 myuser users 49 Jun 13 15:51 db_backup.service -> /home/myuser/.config/systemd/user/db_backup.service
    lrwxrwxrwx 1 myuser users 44 Jun 25 10:10 test.service -> /home/myuser/.config/systemd/user/test.service
    timer-hourly.timer:
    [Unit]
    Description=Hourly Timer
    [Timer]
    OnBootSec=5min
    OnCalendar=hourly
    Unit=timer-hourly.target
    [Install]
    WantedBy=basic.target
    timer-hourly.target:
    [Unit]
    Description=Hourly Timer Target
    StopWhenUnneeded=yes
    test.service:
    [Unit]
    Description=Run a test (echo) job every hour
    Wants=timer-hourly.timer
    [Service]
    Nice=19
    IOSchedulingClass=2
    IOSchedulingPriority=7
    ExecStart=/usr/bin/python /home/myuser/test_service.py
    [Install]
    WantedBy=timer-hourly.target
    db_backup.service:
    [Unit]
    Description=Backups databases
    Wants=timer-hourly.timer
    [Service]
    Nice=19
    IOSchedulingClass=2
    IOSchedulingPriority=7
    ExecStart=/home/myuser/source/db_backups/db_backup.sh
    [Install]
    WantedBy=timer-hourly.target
    test_service.py is a simple python script that appends the current time to a file, to check if the service is being run by the timer. (it is after I start the timer after boot, and runs correctly every hour)
    db_backup.sh is a script that dumps a database into a text file in a mercurial repository, commits the change and pushes it to backup locations.
    Last edited by fede (2014-06-25 21:06:09)

    Have you tried this:
    systemctl --user enable timer-hourly.timer

  • Video problem after boot [SOLVED]

    Hi everyone, I have the this issue
    I already installed arch on a vaio VGN-S360 but after it boot the screen first goes white per pixel, I mean each pixel goes from black to white and then to black I don't know how to explain it exactly. The thing is that the screen after boot the system is completely black.
    I can access like root, and reboot so I realize that the command line is operational but the screen is no giving me the output.
    Can it be a grub problem or a specific hardware issue???
    Any suggestion and help will be helpful
    thanks everyone
    Last edited by k_ibou (2009-11-13 21:40:40)

    I found the solution to the issue, this laptop has a ATI graphic card and it seems that the problem is there.
    in the boot menu, hit ' e ' for edit the menu settings and and the end of the linux line add radeon.modeset=0
    whit that the system goes fine.
    I thinks that I should add that line to the menu.lst

  • [SOLVED]Hanging after booting from installation media

    Yesterday I booted from a rw-DVD got to the terminal and could execute commands, connect to the internet and use elink etc no problem. I didn't go through with installation as I wanted to read up more on partitioning my drives for dual booting before actually doing so.
    Trying the same thing today, and it hangs soon after I boot, regardless of whether I do anything. Printing the following:
    nouveau E[ DRM] failed to idle channel 0xcccc0000 [DRM]
    pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xf0 [nouveau] returns -16
    INFO: rcu_preempt detected stalls on CPUs/tasks: { 6} (detected by 1, t=18002 jiffiess, g=974, c=973, q=604)
    This is without me typing anything. If I try to execute a command quickly after booting it sometimes works, but after a couple of minutes it will complain of a soft lockup.
    I've tried burning another disk, and using a USB installation media, but the same thing happens. Any thoughts?
    Edit: Trying to run it on a laptop with i7-4700MQ, 16GB ram, and Intel(R) HD Graphics 4600 / NVIDIA GeForce GTX 770M
    Second Edit: Booted with nomodeset, which worked and allowed me to install. Just trying to sort out the sodding boot loaders now...
    Last edited by glfharris (2014-07-11 22:42:31)

    Welcome to the forum.
    First of all, you should get in the habit of using [ code ] tags when posting code, not [ quote ] tags (well, unless you want to apply some styling to it, like bold, italic, etc).
    This is wrong:
    # umount /dev/sdc
    This is correct:
    # umount /dev/sdc1
    You were trying to unmount the drive as a whole, which obviously isn't mounted, instead of the first (and probably only) partition. Had you followed the advice from the note to use blkid and check if it's mounted, this wouldn't have happened. But the fact that a DVD produced that error puzzles me... I have no experience with UEFI, but I think you need to press F10, F11, or something like that, to able able to get to a UEFI boot menu, and choose the optical unit as source.
    I hope you used a BitTorrent client when downloading the ISO, and not some direct link (which are prone to CRC errors). If you used a direct link, then check the MD5 and make sure that it matches the one from the Download page. For future reference, torrents are checked while they're being downloaded.

  • [SOLVED] nvidia driver causes blank screen soon after boot

    Hi,
    I have a NVIDIA 560 and was originally using the nouveau driver, but that gave slow performance when doing anything (eg. resizing windows), so I installed the nvidia driver instead by following the wiki section:
    https://wiki.archlinux.org/index.php/NV … au_drivers
    by essentially just following the scripts given there. After switching to nvidia, the screen goes blank soon after boot. I get back into the system by using nomodeset in menu.cfg.
    My question is how do I even begin to find the problem, eg. what log file(s) should I look in and post?
    Thanks
    Last edited by mark1977 (2012-08-19 17:38:42)

    Yes it's the 560 Ti. Thanks I just installed straight from the repos. I've also installed cuda-sdk and cuda-toolkit. I've compiled the libraries inside /opt/cuda-sdk/CUDALibraries fine.
    No I go to compile the sdk examples by running make in /opt/cuda-sdk/C and get the following error:
    # make
    make[1]: Entering directory `/opt/cuda-sdk/C/common'
    make[1]: Leaving directory `/opt/cuda-sdk/C/common'
    make[1]: Entering directory `/opt/cuda-sdk/C/common'
    make[1]: Leaving directory `/opt/cuda-sdk/C/common'
    make[1]: Entering directory `/opt/cuda-sdk/C/common'
    make[1]: Leaving directory `/opt/cuda-sdk/C/common'
    make[1]: Entering directory `/opt/cuda-sdk/shared'
    make[1]: Leaving directory `/opt/cuda-sdk/shared'
    make[1]: Entering directory `/opt/cuda-sdk/C/src/newdelete'
    make[1]: Leaving directory `/opt/cuda-sdk/C/src/newdelete'
    make[1]: Entering directory `/opt/cuda-sdk/C/src/simpleTextureDrv'
    /usr/bin/ld: cannot find -lcuda
    collect2: error: ld returned 1 exit status
    make[1]: *** [../../bin/linux/release/simpleTextureDrv] Error 1
    make[1]: Leaving directory `/opt/cuda-sdk/C/src/simpleTextureDrv'
    make: *** [src/simpleTextureDrv/Makefile.ph_build] Error 2
    The Makefile itself essentially seems to just include the file /opt/cuda-sdk/C/common/common.mk, which is:
    # Copyright 1993-2011 NVIDIA Corporation. All rights reserved.
    # NVIDIA Corporation and its licensors retain all intellectual property and
    # proprietary rights in and to this software and related documentation.
    # Any use, reproduction, disclosure, or distribution of this software
    # and related documentation without an express license agreement from
    # NVIDIA Corporation is strictly prohibited.
    # Please refer to the applicable NVIDIA end user license agreement (EULA)
    # associated with this source code for terms and conditions that govern
    # your use of this NVIDIA software.
    # Common build script for CUDA source projects for Linux and Mac platforms
    .SUFFIXES : .cu .cu_dbg.o .c_dbg.o .cpp_dbg.o .cu_rel.o .c_rel.o .cpp_rel.o .cubin .ptx
    # Add new SM Versions here as devices with new Compute Capability are released
    SM_VERSIONS := 10 11 12 13 20 21 30
    CUDA_INSTALL_PATH ?= /opt/cuda-toolkit
    ifdef cuda-install
    CUDA_INSTALL_PATH := $(cuda-install)
    endif
    # detect OS
    OSUPPER = $(shell uname -s 2>/dev/null | tr [:lower:] [:upper:])
    OSLOWER = $(shell uname -s 2>/dev/null | tr [:upper:] [:lower:])
    # 'linux' is output for Linux system, 'darwin' for OS X
    DARWIN = $(strip $(findstring DARWIN, $(OSUPPER)))
    ifneq ($(DARWIN),)
    SNOWLEOPARD = $(strip $(findstring 10.6, $(shell egrep "<string>10\.6" /System/Library/CoreServices/SystemVersion.plist)))
    LION = $(strip $(findstring 10.7, $(shell egrep "<string>10\.7" /System/Library/CoreServices/SystemVersion.plist)))
    endif
    # detect 32-bit or 64-bit platform
    HP_64 = $(shell uname -m | grep 64)
    OSARCH= $(shell uname -m)
    # Basic directory setup for SDK
    # (override directories only if they are not already defined)
    SRCDIR ?=
    ROOTDIR ?= ..
    ROOTBINDIR ?= $(ROOTDIR)/../bin
    BINDIR ?= $(ROOTBINDIR)/$(OSLOWER)
    ROOTOBJDIR ?= obj
    LIBDIR := $(ROOTDIR)/../lib
    COMMONDIR := $(ROOTDIR)/../common
    SHAREDDIR := $(ROOTDIR)/../../shared/
    # Compilers
    NVCC := $(CUDA_INSTALL_PATH)/bin/nvcc
    CXX := g++ -fPIC
    CC := gcc -fPIC
    LINK := g++ -fPIC
    # Includes
    INCLUDES += -I. -I$(CUDA_INSTALL_PATH)/include -I$(COMMONDIR)/inc -I$(SHAREDDIR)/inc
    # Warning flags
    CXXWARN_FLAGS := \
    -W -Wall \
    -Wimplicit \
    -Wswitch \
    -Wformat \
    -Wchar-subscripts \
    -Wparentheses \
    -Wmultichar \
    -Wtrigraphs \
    -Wpointer-arith \
    -Wcast-align \
    -Wreturn-type \
    -Wno-unused-function \
    $(SPACE)
    CWARN_FLAGS := $(CXXWARN_FLAGS) \
    -Wstrict-prototypes \
    -Wmissing-prototypes \
    -Wmissing-declarations \
    -Wnested-externs \
    -Wmain \
    # architecture flag for nvcc and gcc compilers build
    CUBIN_ARCH_FLAG :=
    CXX_ARCH_FLAGS :=
    NVCCFLAGS :=
    LIB_ARCH := $(OSARCH)
    # Determining the necessary Cross-Compilation Flags
    # 32-bit OS, but we target 64-bit cross compilation
    ifeq ($(x86_64),1)
    NVCCFLAGS += -m64
    LIB_ARCH = x86_64
    ifneq ($(DARWIN),)
    CXX_ARCH_FLAGS += -arch x86_64
    else
    CXX_ARCH_FLAGS += -m64
    endif
    else
    # 64-bit OS, and we target 32-bit cross compilation
    ifeq ($(i386),1)
    NVCCFLAGS += -m32
    LIB_ARCH = i386
    ifneq ($(DARWIN),)
    CXX_ARCH_FLAGS += -arch i386
    else
    CXX_ARCH_FLAGS += -m32
    endif
    else
    ifeq "$(strip $(HP_64))" ""
    LIB_ARCH = i386
    NVCCFLAGS += -m32
    ifneq ($(DARWIN),)
    CXX_ARCH_FLAGS += -arch i386
    else
    CXX_ARCH_FLAGS += -m32
    endif
    else
    LIB_ARCH = x86_64
    NVCCFLAGS += -m64
    ifneq ($(DARWIN),)
    CXX_ARCH_FLAGS += -arch x86_64
    else
    CXX_ARCH_FLAGS += -m64
    endif
    endif
    endif
    endif
    # Compiler-specific flags (by default, we always use sm_10, sm_20, and sm_30), unless we use the SMVERSION template
    GENCODE_SM10 := -gencode=arch=compute_10,code=\"sm_10,compute_10\"
    GENCODE_SM20 := -gencode=arch=compute_20,code=\"sm_20,compute_20\"
    GENCODE_SM30 := -gencode=arch=compute_30,code=\"sm_30,compute_30\"
    CXXFLAGS += $(CXXWARN_FLAGS) $(CXX_ARCH_FLAGS)
    CFLAGS += $(CWARN_FLAGS) $(CXX_ARCH_FLAGS)
    LINKFLAGS += -L/usr/lib
    LINK += $(LINKFLAGS) $(CXX_ARCH_FLAGS)
    # This option for Mac allows CUDA applications to work without requiring to set DYLD_LIBRARY_PATH
    ifneq ($(DARWIN),)
    LINK += -Xlinker -rpath $(CUDA_INSTALL_PATH)/lib
    endif
    # Common flags
    COMMONFLAGS += $(INCLUDES) -DUNIX
    # If we are enabling GPU based debugging, then we want to use -G, warning that this
    # May have a significant impact on GPU device code, since optimizations are turned off
    ifeq ($(gpudbg),1)
    NVCCFLAGS += -G
    dbg = $(gpudbg)
    endif
    # Debug/release configuration
    ifeq ($(dbg),1)
    COMMONFLAGS += -g
    NVCCFLAGS += -D_DEBUG
    CXXFLAGS += -D_DEBUG
    CFLAGS += -D_DEBUG
    BINSUBDIR := debug
    LIBSUFFIX := D
    else
    COMMONFLAGS += -O2
    BINSUBDIR := release
    LIBSUFFIX :=
    NVCCFLAGS += --compiler-options -fno-strict-aliasing
    CXXFLAGS += -fno-strict-aliasing
    CFLAGS += -fno-strict-aliasing
    endif
    # architecture flag for cubin build
    CUBIN_ARCH_FLAG :=
    # OpenGL is used or not (if it is used, then it is necessary to include GLEW)
    ifeq ($(USEGLLIB),1)
    ifneq ($(DARWIN),)
    OPENGLLIB := -L/System/Library/Frameworks/OpenGL.framework/Libraries
    OPENGLLIB += -lGL -lGLU $(COMMONDIR)/lib/$(OSLOWER)/libGLEW.a
    else
    # this case for linux platforms
    OPENGLLIB := -lGL -lGLU -lX11 -lXi -lXmu
    # check if x86_64 flag has been set, otherwise, check HP_64 is i386/x86_64
    ifeq ($(x86_64),1)
    OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
    else
    ifeq ($(i386),)
    ifeq "$(strip $(HP_64))" ""
    OPENGLLIB += -lGLEW -L/usr/X11R6/lib
    else
    OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
    endif
    endif
    endif
    # check if i386 flag has been set, otehrwise check HP_64 is i386/x86_64
    ifeq ($(i386),1)
    OPENGLLIB += -lGLEW -L/usr/X11R6/lib
    else
    ifeq ($(x86_64),)
    ifeq "$(strip $(HP_64))" ""
    OPENGLLIB += -lGLEW -L/usr/X11R6/lib
    else
    OPENGLLIB += -lGLEW_x86_64 -L/usr/X11R6/lib64
    endif
    endif
    endif
    endif
    endif
    ifeq ($(USEGLUT),1)
    ifneq ($(DARWIN),)
    OPENGLLIB += -framework GLUT
    else
    ifeq ($(x86_64),1)
    OPENGLLIB += -lglut -L/usr/lib64
    endif
    ifeq ($(i386),1)
    OPENGLLIB += -lglut -L/usr/lib
    endif
    ifeq ($(x86_64),)
    ifeq ($(i386),)
    OPENGLLIB += -lglut
    endif
    endif
    endif
    endif
    ifeq ($(USEPARAMGL),1)
    PARAMGLLIB := -lparamgl_$(LIB_ARCH)$(LIBSUFFIX)
    endif
    ifeq ($(USERENDERCHECKGL),1)
    RENDERCHECKGLLIB := -lrendercheckgl_$(LIB_ARCH)$(LIBSUFFIX)
    endif
    ifeq ($(USENVCUVID), 1)
    ifneq ($(DARWIN),)
    NVCUVIDLIB := -L../../common/lib/darwin -lnvcuvid
    endif
    endif
    # Libs
    ifneq ($(DARWIN),)
    LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib $(NVCUVIDLIB)
    else
    ifeq "$(strip $(HP_64))" ""
    ifeq ($(x86_64),1)
    LIB := -L$(CUDA_INSTALL_PATH)/lib64 -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
    else
    LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
    endif
    else
    ifeq ($(i386),1)
    LIB := -L$(CUDA_INSTALL_PATH)/lib -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
    else
    LIB := -L$(CUDA_INSTALL_PATH)/lib64 -L$(LIBDIR) -L$(COMMONDIR)/lib/$(OSLOWER) -L$(SHAREDDIR)/lib
    endif
    endif
    endif
    # If dynamically linking to CUDA and CUDART, we exclude the libraries from the LIB
    ifeq ($(USECUDADYNLIB),1)
    LIB += ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB} -ldl -rdynamic
    else
    # static linking, we will statically link against CUDA and CUDART
    ifeq ($(USEDRVAPI),1)
    LIB += -L/usr/lib -lcuda ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB}
    else
    ifeq ($(emu),1)
    LIB += -lcudartemu
    else
    LIB += -lcudart
    endif
    LIB += ${OPENGLLIB} $(PARAMGLLIB) $(RENDERCHECKGLLIB) ${LIB}
    endif
    endif
    ifeq ($(USECUFFT),1)
    ifeq ($(emu),1)
    LIB += -lcufftemu
    else
    LIB += -lcufft
    endif
    endif
    ifeq ($(USECUBLAS),1)
    ifeq ($(emu),1)
    LIB += -lcublasemu
    else
    LIB += -lcublas
    endif
    endif
    ifeq ($(USECURAND),1)
    LIB += -lcurand
    endif
    ifeq ($(USECUSPARSE),1)
    LIB += -lcusparse
    endif
    # Lib/exe configuration
    # Lib/exe configuration
    # Lib/exe configuration
    ifneq ($(STATIC_LIB),)
    TARGETDIR := $(LIBDIR)
    TARGET := $(subst .a,_$(LIB_ARCH)$(LIBSUFFIX).a,$(LIBDIR)/$(STATIC_LIB))
    LINKLINE = ar rucv $(TARGET) $(OBJS)
    else
    ifneq ($(OMIT_CUTIL_LIB),1)
    LIB += -lcutil_$(LIB_ARCH)$(LIBSUFFIX)
    endif
    ifneq ($(OMIT_SHRUTIL_LIB),1)
    LIB += -lshrutil_$(LIB_ARCH)$(LIBSUFFIX)
    endif
    # Device emulation configuration
    ifeq ($(emu), 1)
    NVCCFLAGS += -deviceemu
    CUDACCFLAGS +=
    BINSUBDIR := emu$(BINSUBDIR)
    # consistency, makes developing easier
    CXXFLAGS += -D__DEVICE_EMULATION__
    CFLAGS += -D__DEVICE_EMULATION__
    endif
    TARGETDIR := $(BINDIR)/$(BINSUBDIR)
    TARGET := $(TARGETDIR)/$(EXECUTABLE)
    LINKLINE = $(LINK) -o $(TARGET) $(OBJS) $(LIB)
    endif
    # check if verbose
    ifeq ($(verbose), 1)
    VERBOSE :=
    else
    VERBOSE := @
    endif
    # Check for input flags and set compiler flags appropriately
    ifeq ($(fastmath), 1)
    NVCCFLAGS += -use_fast_math
    endif
    ifeq ($(keep), 1)
    NVCCFLAGS += -keep
    NVCC_KEEP_CLEAN := *.i* *.cubin *.cu.c *.cudafe* *.fatbin.c *.ptx
    endif
    ifdef maxregisters
    NVCCFLAGS += -maxrregcount $(maxregisters)
    endif
    ifeq ($(ptxas), 1)
    NVCCFLAGS += --ptxas-options=-v
    endif
    # Add cudacc flags
    NVCCFLAGS += $(CUDACCFLAGS)
    # Add common flags
    NVCCFLAGS += $(COMMONFLAGS)
    CXXFLAGS += $(COMMONFLAGS)
    CFLAGS += $(COMMONFLAGS)
    ifeq ($(nvcc_warn_verbose),1)
    NVCCFLAGS += $(addprefix --compiler-options ,$(CXXWARN_FLAGS))
    NVCCFLAGS += --compiler-options -fno-strict-aliasing
    endif
    # Set up object files
    OBJDIR := $(ROOTOBJDIR)/$(LIB_ARCH)/$(BINSUBDIR)
    OBJS += $(patsubst %.cpp,$(OBJDIR)/%.cpp.o,$(notdir $(CCFILES)))
    OBJS += $(patsubst %.c,$(OBJDIR)/%.c.o,$(notdir $(CFILES)))
    OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu.o,$(notdir $(CUFILES)))
    # Set up cubin output files
    CUBINDIR := $(SRCDIR)data
    CUBINS += $(patsubst %.cu,$(CUBINDIR)/%.cubin,$(notdir $(CUBINFILES)))
    # Set up PTX output files
    PTXDIR := $(SRCDIR)data
    PTXBINS += $(patsubst %.cu,$(PTXDIR)/%.ptx,$(notdir $(PTXFILES)))
    # Rules
    $(OBJDIR)/%.c.o : $(SRCDIR)%.c $(C_DEPS)
    $(VERBOSE)$(CC) $(CFLAGS) -o $@ -c $<
    $(OBJDIR)/%.cpp.o : $(SRCDIR)%.cpp $(C_DEPS)
    $(VERBOSE)$(CXX) $(CXXFLAGS) -o $@ -c $<
    # Default arch includes gencode for sm_10, sm_20, sm_30, and other archs from GENCODE_ARCH declared in the makefile
    $(OBJDIR)/%.cu.o : $(SRCDIR)%.cu $(CU_DEPS)
    $(VERBOSE)$(NVCC) $(GENCODE_SM10) $(GENCODE_ARCH) $(GENCODE_SM20) $(GENCODE_SM30) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -c $<
    # Default arch includes gencode for sm_10, sm_20, sm_30, and other archs from GENCODE_ARCH declared in the makefile
    $(CUBINDIR)/%.cubin : $(SRCDIR)%.cu cubindirectory
    $(VERBOSE)$(NVCC) $(GENCODE_SM10) $(GENCODE_ARCH) $(GENCODE_SM20) $(GENCODE_SM30) $(CUBIN_ARCH_FLAG) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -cubin $<
    $(PTXDIR)/%.ptx : $(SRCDIR)%.cu ptxdirectory
    $(VERBOSE)$(NVCC) $(CUBIN_ARCH_FLAG) $(NVCCFLAGS) $(SMVERSIONFLAGS) -o $@ -ptx $<
    # The following definition is a template that gets instantiated for each SM
    # version (sm_10, sm_13, etc.) stored in SMVERSIONS. It does 2 things:
    # 1. It adds to OBJS a .cu_sm_XX.o for each .cu file it finds in CUFILES_sm_XX.
    # 2. It generates a rule for building .cu_sm_XX.o files from the corresponding
    # .cu file.
    # The intended use for this is to allow Makefiles that use common.mk to compile
    # files to different Compute Capability targets (aka SM arch version). To do
    # so, in the Makefile, list files for each SM arch separately, like so:
    # This will be used over the default rule abov
    # CUFILES_sm_10 := mycudakernel_sm10.cu app.cu
    # CUFILES_sm_12 := anothercudakernel_sm12.cu
    define SMVERSION_template
    #OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu_$(1).o,$(notdir $(CUFILES_$(1))))
    OBJS += $(patsubst %.cu,$(OBJDIR)/%.cu_$(1).o,$(notdir $(CUFILES_sm_$(1))))
    $(OBJDIR)/%.cu_$(1).o : $(SRCDIR)%.cu $(CU_DEPS)
    # $(VERBOSE)$(NVCC) -o $$@ -c $$< $(NVCCFLAGS) $(1)
    $(VERBOSE)$(NVCC) -gencode=arch=compute_$(1),code=\"sm_$(1),compute_$(1)\" $(GENCODE_SM20) $(GENCODE_SM30) -o $$@ -c $$< $(NVCCFLAGS)
    endef
    # This line invokes the above template for each arch version stored in
    # SM_VERSIONS. The call funtion invokes the template, and the eval
    # function interprets it as make commands.
    $(foreach smver,$(SM_VERSIONS),$(eval $(call SMVERSION_template,$(smver))))
    $(TARGET): makedirectories $(OBJS) $(CUBINS) $(PTXBINS) Makefile
    $(VERBOSE)$(LINKLINE)
    cubindirectory:
    $(VERBOSE)mkdir -p $(CUBINDIR)
    ptxdirectory:
    $(VERBOSE)mkdir -p $(PTXDIR)
    makedirectories:
    $(VERBOSE)mkdir -p $(LIBDIR)
    $(VERBOSE)mkdir -p $(OBJDIR)
    $(VERBOSE)mkdir -p $(TARGETDIR)
    tidy :
    $(VERBOSE)find . | egrep "#" | xargs rm -f
    $(VERBOSE)find . | egrep "\~" | xargs rm -f
    clean : tidy
    $(VERBOSE)rm -f *.stub.c *.gpu *.cu.cpp *.i *.ii
    $(VERBOSE)rm -f *.cubin *.ptx *.fatbin.c *.hash
    $(VERBOSE)rm -f *.cudafe1.c *.cudafe2.c *.cudafe1.cpp *.cudafe2.cpp
    $(VERBOSE)rm -f $(OBJS)
    $(VERBOSE)rm -f $(CUBINS)
    $(VERBOSE)rm -f $(PTXBINS)
    $(VERBOSE)rm -f $(TARGET)
    $(VERBOSE)rm -f $(NVCC_KEEP_CLEAN)
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.ppm
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.pgm
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.bin
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.bmp
    $(VERBOSE)rm -f $(ROOTBINDIR)/$(OSLOWER)/$(BINSUBDIR)/*.txt
    $(VERBOSE)rm -f $(CUBINDIR)/*.cubin $(PTXDIR)/*.ptx
    $(VERBOSE)rm -rf $(ROOTOBJDIR)
    $(VERBOSE)rm -rf $(LIBDIR)
    $(VERBOSE)rm -rf $(OBJDIR)
    $(VERBOSE)rm -rf $(TARGETDIR)
    clobber : clean
    $(VERBOSE)rm -rf $(COMMONDIR)/lib/*.a
    $(VERBOSE)rm -rf $(SHAREDDIR)/lib/*.a
    $(VERBOSE)rm -rf $(COMMONDIR)/obj
    $(VERBOSE)rm -rf $(SHAREDDIR)/obj
    The output of echo $LD_LIBRARY_PATH is blank.
    I have checked for libcuda and can find it:
    # ls /usr/lib | grep libcuda
    libcuda.so.1
    libcuda.so.304.32
    Is there something obvious I need to do to get these to compile?
    Thanks again.

  • No battery after boot. Dell 7537

    Hi All,
    I have this issue after installing arch (currently the only issue)
    As it is a notebook, I would love to see my current levels of battery, right after boot, but I am unable to. The only way how to trigger the battery notification is to
    1.) hybernate
        OR
    2.) connect/disconnect the AC adapter.
    And I would like to make it automatic.
    Thank you, in advance, for any kind of clues.
    Something about my system:
    [void@GLaDOS ~]$ uname -a
    Linux GLaDOS 3.13.7-1-ARCH #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014 x86_64 GNU/Linux
    [void@GLaDOS ~]$
    [void@GLaDOS ~]$ dmesg
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.13.7-1-ARCH (nobody@var-lib-archbuild-extra-x86_64-thomas) (gcc version 4.8.2 20140206 (prerelease) (GCC) ) #1 SMP PREEMPT Mon Mar 24 20:06:08 CET 2014
    [ 0.000000] Command line: initrd=\initramfs-linux.img root=/dev/sda10
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x0000000000057fff] usable
    [ 0.000000] BIOS-e820: [mem 0x0000000000058000-0x0000000000058fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000059000-0x000000000009cfff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d000-0x00000000000bffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000a611dfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000a611e000-0x00000000a631ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000a6320000-0x00000000ba6f8fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba6f9000-0x00000000bceeafff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000bceeb000-0x00000000bcf9cfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000bcf9d000-0x00000000bcffefff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000023f5fffff] usable
    [ 0.000000] e820: update [mem 0xa7124018-0xa7134057] usable ==> usable
    [ 0.000000] e820: update [mem 0xa7116018-0xa7123057] usable ==> usable
    [ 0.000000] extended physical RAM map:
    [ 0.000000] reserve setup_data: [mem 0x0000000000000000-0x0000000000057fff] usable
    [ 0.000000] reserve setup_data: [mem 0x0000000000058000-0x0000000000058fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000059000-0x000000000009cfff] usable
    [ 0.000000] reserve setup_data: [mem 0x000000000009d000-0x00000000000bffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000000100000-0x00000000a611dfff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a611e000-0x00000000a631ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000a6320000-0x00000000a7116017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a7116018-0x00000000a7123057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a7123058-0x00000000a7124017] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a7124018-0x00000000a7134057] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000a7134058-0x00000000ba6f8fff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000ba6f9000-0x00000000bceeafff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000bceeb000-0x00000000bcf9cfff] ACPI NVS
    [ 0.000000] reserve setup_data: [mem 0x00000000bcf9d000-0x00000000bcffefff] ACPI data
    [ 0.000000] reserve setup_data: [mem 0x00000000bcfff000-0x00000000bcffffff] usable
    [ 0.000000] reserve setup_data: [mem 0x00000000bd000000-0x00000000bf9fffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000f80f8000-0x00000000f80f8fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fe101000-0x00000000fe112fff] reserved
    [ 0.000000] reserve setup_data: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] reserve setup_data: [mem 0x0000000100000000-0x000000023f5fffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] efi: EFI v2.31 by Phoenix Technologies Ltd.
    [ 0.000000] efi: ACPI=0xbcffe000 ACPI 2.0=0xbcffe014 SMBIOS=0xbce84000
    [ 0.000000] efi: mem00: type=7, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB)
    [ 0.000000] efi: mem01: type=2, attr=0xf, range=[0x0000000000001000-0x0000000000007000) (0MB)
    [ 0.000000] efi: mem02: type=7, attr=0xf, range=[0x0000000000007000-0x0000000000058000) (0MB)
    [ 0.000000] efi: mem03: type=0, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB)
    [ 0.000000] efi: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000009d000) (0MB)
    [ 0.000000] efi: mem05: type=0, attr=0xf, range=[0x000000000009d000-0x00000000000a0000) (0MB)
    [ 0.000000] efi: mem06: type=0, attr=0x0, range=[0x00000000000e0000-0x0000000000100000) (0MB)
    [ 0.000000] efi: mem07: type=7, attr=0xf, range=[0x0000000000100000-0x0000000001000000) (15MB)
    [ 0.000000] efi: mem08: type=2, attr=0xf, range=[0x0000000001000000-0x0000000001f61000) (15MB)
    [ 0.000000] efi: mem09: type=7, attr=0xf, range=[0x0000000001f61000-0x000000007fcdf000) (2013MB)
    [ 0.000000] efi: mem10: type=2, attr=0xf, range=[0x000000007fcdf000-0x0000000080000000) (3MB)
    [ 0.000000] efi: mem11: type=7, attr=0xf, range=[0x0000000080000000-0x00000000a4106000) (577MB)
    [ 0.000000] efi: mem12: type=4, attr=0xf, range=[0x00000000a4106000-0x00000000a4126000) (0MB)
    [ 0.000000] efi: mem13: type=7, attr=0xf, range=[0x00000000a4126000-0x00000000a6107000) (31MB)
    [ 0.000000] efi: mem14: type=4, attr=0xf, range=[0x00000000a6107000-0x00000000a611e000) (0MB)
    [ 0.000000] efi: mem15: type=0, attr=0xf, range=[0x00000000a611e000-0x00000000a6320000) (2MB)
    [ 0.000000] efi: mem16: type=4, attr=0xf, range=[0x00000000a6320000-0x00000000a70f6000) (13MB)
    [ 0.000000] efi: mem17: type=7, attr=0xf, range=[0x00000000a70f6000-0x00000000a7116000) (0MB)
    [ 0.000000] efi: mem18: type=2, attr=0xf, range=[0x00000000a7116000-0x00000000a7136000) (0MB)
    [ 0.000000] efi: mem19: type=7, attr=0xf, range=[0x00000000a7136000-0x00000000a7137000) (0MB)
    [ 0.000000] efi: mem20: type=2, attr=0xf, range=[0x00000000a7137000-0x00000000a713a000) (0MB)
    [ 0.000000] efi: mem21: type=7, attr=0xf, range=[0x00000000a713a000-0x00000000a734d000) (2MB)
    [ 0.000000] efi: mem22: type=1, attr=0xf, range=[0x00000000a734d000-0x00000000a7730000) (3MB)
    [ 0.000000] efi: mem23: type=7, attr=0xf, range=[0x00000000a7730000-0x00000000ac157000) (74MB)
    [ 0.000000] efi: mem24: type=4, attr=0xf, range=[0x00000000ac157000-0x00000000ad385000) (18MB)
    [ 0.000000] efi: mem25: type=7, attr=0xf, range=[0x00000000ad385000-0x00000000ad69d000) (3MB)
    [ 0.000000] efi: mem26: type=4, attr=0xf, range=[0x00000000ad69d000-0x00000000ad6c1000) (0MB)
    [ 0.000000] efi: mem27: type=7, attr=0xf, range=[0x00000000ad6c1000-0x00000000ad6e5000) (0MB)
    [ 0.000000] efi: mem28: type=4, attr=0xf, range=[0x00000000ad6e5000-0x00000000ad86e000) (1MB)
    [ 0.000000] efi: mem29: type=7, attr=0xf, range=[0x00000000ad86e000-0x00000000ad922000) (0MB)
    [ 0.000000] efi: mem30: type=4, attr=0xf, range=[0x00000000ad922000-0x00000000aeae1000) (17MB)
    [ 0.000000] efi: mem31: type=7, attr=0xf, range=[0x00000000aeae1000-0x00000000aeae3000) (0MB)
    [ 0.000000] efi: mem32: type=4, attr=0xf, range=[0x00000000aeae3000-0x00000000afdd9000) (18MB)
    [ 0.000000] efi: mem33: type=7, attr=0xf, range=[0x00000000afdd9000-0x00000000ba1b3000) (163MB)
    [ 0.000000] efi: mem34: type=3, attr=0xf, range=[0x00000000ba1b3000-0x00000000ba6f9000) (5MB)
    [ 0.000000] efi: mem35: type=5, attr=0x800000000000000f, range=[0x00000000ba6f9000-0x00000000ba8fb000) (2MB)
    [ 0.000000] efi: mem36: type=6, attr=0x800000000000000f, range=[0x00000000ba8fb000-0x00000000bc8fb000) (32MB)
    [ 0.000000] efi: mem37: type=0, attr=0xf, range=[0x00000000bc8fb000-0x00000000bceeb000) (5MB)
    [ 0.000000] efi: mem38: type=10, attr=0xf, range=[0x00000000bceeb000-0x00000000bcf9d000) (0MB)
    [ 0.000000] efi: mem39: type=9, attr=0xf, range=[0x00000000bcf9d000-0x00000000bcfff000) (0MB)
    [ 0.000000] efi: mem40: type=4, attr=0xf, range=[0x00000000bcfff000-0x00000000bd000000) (0MB)
    [ 0.000000] efi: mem41: type=7, attr=0xf, range=[0x0000000100000000-0x000000023f600000) (5110MB)
    [ 0.000000] efi: mem42: type=0, attr=0x0, range=[0x00000000000a0000-0x00000000000c0000) (0MB)
    [ 0.000000] efi: mem43: type=0, attr=0x0, range=[0x00000000bd000000-0x00000000bfa00000) (42MB)
    [ 0.000000] efi: mem44: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB)
    [ 0.000000] efi: mem45: type=0, attr=0x0, range=[0x00000000fe101000-0x00000000fe113000) (0MB)
    [ 0.000000] efi: mem46: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB)
    [ 0.000000] efi: mem47: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] efi: mem48: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] efi: mem49: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] efi: mem50: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] efi: mem51: type=0, attr=0x0, range=[0x0000000000000000-0x0000000000000000) (0MB)
    [ 0.000000] SMBIOS 2.7 present.
    [ 0.000000] DMI: Dell Inc. Inspiron 7537/07PF9F, BIOS A07 01/21/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x23f600 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: write-back
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 00C0000000 mask 7FC0000000 uncachable
    [ 0.000000] 1 base 00BE000000 mask 7FFE000000 uncachable
    [ 0.000000] 2 base 00BD000000 mask 7FFF000000 uncachable
    [ 0.000000] 3 disabled
    [ 0.000000] 4 disabled
    [ 0.000000] 5 disabled
    [ 0.000000] 6 disabled
    [ 0.000000] 7 disabled
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: last_pfn = 0xbd000 max_arch_pfn = 0x400000000
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x02b3f000, 0x02b3ffff] PGTABLE
    [ 0.000000] BRK [0x02b40000, 0x02b40fff] PGTABLE
    [ 0.000000] BRK [0x02b41000, 0x02b41fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23f400000-0x23f5fffff]
    [ 0.000000] [mem 0x23f400000-0x23f5fffff] page 2M
    [ 0.000000] BRK [0x02b42000, 0x02b42fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x23c000000-0x23f3fffff]
    [ 0.000000] [mem 0x23c000000-0x23f3fffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x200000000-0x23bffffff]
    [ 0.000000] [mem 0x200000000-0x23bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xa611dfff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0xa5ffffff] page 2M
    [ 0.000000] [mem 0xa6000000-0xa611dfff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xa6320000-0xba6f8fff]
    [ 0.000000] [mem 0xa6320000-0xa63fffff] page 4k
    [ 0.000000] [mem 0xa6400000-0xba5fffff] page 2M
    [ 0.000000] [mem 0xba600000-0xba6f8fff] page 4k
    [ 0.000000] BRK [0x02b43000, 0x02b43fff] PGTABLE
    [ 0.000000] BRK [0x02b44000, 0x02b44fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbcfff000-0xbcffffff]
    [ 0.000000] [mem 0xbcfff000-0xbcffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x1ffffffff]
    [ 0.000000] [mem 0x100000000-0x1ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x7fcdf000-0x7fffffff]
    [ 0.000000] ACPI: RSDP 00000000bcffe014 000024 (v02 DELL )
    [ 0.000000] ACPI: XSDT 00000000bcffe170 0000CC (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FACP 00000000bcffb000 00010C (v05 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI Error: Gpe0Block - 32-bit FADT register is too long (32 bytes, 256 bits) to convert to GAS struct - 255 bits max, truncating (20131115/tbfadt-202)
    [ 0.000000] ACPI: DSDT 00000000bcfe9000 00D96C (v02 DELL HSW-LPT 00000000 INTL 20120711)
    [ 0.000000] ACPI: FACS 00000000bcf9a000 000040
    [ 0.000000] ACPI: ASF! 00000000bcffd000 0000A5 (v32 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: HPET 00000000bcffa000 000038 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: LPIT 00000000bcff9000 00005C (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: APIC 00000000bcff8000 000098 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: MCFG 00000000bcff7000 00003C (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 00000000bcfe8000 000228 (v01 DELL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfe5000 002028 (v01 DELL PtidDevc 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfe4000 0004D6 (v01 DELL Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfe3000 000AD8 (v01 DELL CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfdf000 003517 (v01 DELL SaSsdt 00003000 INTL 20120711)
    [ 0.000000] ACPI: UEFI 00000000bcfde000 000042 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: MSDM 00000000bcf72000 000055 (v03 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: UEFI 00000000bcfdd000 00003E (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: FPDT 00000000bcfdc000 000064 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SLIC 00000000bcfdb000 000176 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: SSDT 00000000bcfd9000 001049 (v01 NvORef NvUltTbl 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 00000000bcfd8000 0008CA (v01 DELL IsctTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: UEFI 00000000bcfd7000 0002CE (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: BGRT 00000000bcfd6000 000038 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: CSRT 00000000bcfd5000 0000C4 (v01 DELL WN09 00000002 LOHR 00000002)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000023f5fffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x23f5fffff]
    [ 0.000000] NODE_DATA [mem 0x23f5f8000-0x23f5fcfff]
    [ 0.000000] [ffffea0000000000-ffffea0008ffffff] PMD -> [ffff880236c00000-ffff88023ebfffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x23f5fffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x00057fff]
    [ 0.000000] node 0: [mem 0x00059000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xa611dfff]
    [ 0.000000] node 0: [mem 0xa6320000-0xba6f8fff]
    [ 0.000000] node 0: [mem 0xbcfff000-0xbcffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x23f5fffff]
    [ 0.000000] On node 0 totalpages: 2071187
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3995 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 11860 pages used for memmap
    [ 0.000000] DMA32 zone: 759032 pages, LIFO batch:31
    [ 0.000000] Normal zone: 20440 pages used for memmap
    [ 0.000000] Normal zone: 1308160 pages, LIFO batch:31
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-39
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 4 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 56
    [ 0.000000] PM: Registered nosave memory: [mem 0x00058000-0x00058fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x000bffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000c0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa611e000-0xa631ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa7116000-0xa7116fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa7123000-0xa7123fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa7124000-0xa7124fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xa7134000-0xa7134fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba6f9000-0xbceeafff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbceeb000-0xbcf9cfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbcf9d000-0xbcffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbd000000-0xbf9fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xbfa00000-0xf80f7fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf80f8000-0xf80f8fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf80f9000-0xfe100fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe101000-0xfe112fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfe113000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xffffffff]
    [ 0.000000] e820: [mem 0xbfa00000-0xf80f7fff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88023f200000 s86336 r8192 d24256 u262144
    [ 0.000000] pcpu-alloc: s86336 r8192 d24256 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 2038802
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: initrd=\initramfs-linux.img root=/dev/sda10
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] Checking aperture...
    [ 0.000000] No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 7993744K/8284748K available (5271K kernel code, 836K rwdata, 1676K rodata, 1128K init, 1324K bss, 291004K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] NR_IRQS:8448 nr_irqs:1016 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 33554432 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.003333] tsc: Detected 1795.962 MHz processor
    [ 0.000003] Calibrating delay loop (skipped), value calculated using timer frequency.. 3593.58 BogoMIPS (lpj=5986540)
    [ 0.000006] pid_max: default: 32768 minimum: 301
    [ 0.000021] init_memory_mapping: [mem 0xba6f9000-0xba8fafff]
    [ 0.000024] [mem 0xba6f9000-0xba8fafff] page 4k
    [ 0.000044] init_memory_mapping: [mem 0xba8fb000-0xbc8fafff]
    [ 0.000045] [mem 0xba8fb000-0xba9fffff] page 4k
    [ 0.000046] [mem 0xbaa00000-0xbc7fffff] page 2M
    [ 0.000047] [mem 0xbc800000-0xbc8fafff] page 4k
    [ 0.037714] Security Framework initialized
    [ 0.037724] AppArmor: AppArmor disabled by boot time parameter
    [ 0.037725] Yama: becoming mindful.
    [ 0.038391] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.040413] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes)
    [ 0.041277] Mount-cache hash table entries: 256
    [ 0.041479] Initializing cgroup subsys memory
    [ 0.041486] Initializing cgroup subsys devices
    [ 0.041488] Initializing cgroup subsys freezer
    [ 0.041489] Initializing cgroup subsys net_cls
    [ 0.041491] Initializing cgroup subsys blkio
    [ 0.041517] CPU: Physical Processor ID: 0
    [ 0.041518] CPU: Processor Core ID: 0
    [ 0.041523] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.042693] mce: CPU supports 7 MCE banks
    [ 0.042708] CPU0: Thermal monitoring enabled (TM1)
    [ 0.042721] Last level iTLB entries: 4KB 0, 2MB 0, 4MB 0
    Last level dTLB entries: 4KB 64, 2MB 0, 4MB 0
    tlb_flushall_shift: 6
    [ 0.042829] Freeing SMP alternatives memory: 20K (ffffffff819ed000 - ffffffff819f2000)
    [ 0.043845] ACPI: Core revision 20131115
    [ 0.056685] ACPI: All ACPI Tables successfully acquired
    [ 0.061212] ftrace: allocating 21068 entries in 83 pages
    [ 0.072756] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.105753] smpboot: CPU0: Intel(R) Core(TM) i7-4500U CPU @ 1.80GHz (fam: 06, model: 45, stepping: 01)
    [ 0.105760] TSC deadline timer enabled
    [ 0.105771] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.105779] ... version: 3
    [ 0.105780] ... bit width: 48
    [ 0.105781] ... generic registers: 4
    [ 0.105782] ... value mask: 0000ffffffffffff
    [ 0.105783] ... max period: 0000ffffffffffff
    [ 0.105784] ... fixed-purpose events: 3
    [ 0.105785] ... event mask: 000000070000000f
    [ 0.132534] x86: Booting SMP configuration:
    [ 0.147279] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.132537] .... node #0, CPUs: #1 #2 #3
    [ 0.189504] x86: Booted up 1 node, 4 CPUs
    [ 0.189509] smpboot: Total of 4 processors activated (14373.35 BogoMIPS)
    [ 0.195133] devtmpfs: initialized
    [ 0.198124] PM: Registering ACPI NVS region [mem 0xbceeb000-0xbcf9cfff] (729088 bytes)
    [ 0.199015] RTC time: 17:45:30, date: 03/28/14
    [ 0.199059] NET: Registered protocol family 16
    [ 0.199163] cpuidle: using governor ladder
    [ 0.199165] cpuidle: using governor menu
    [ 0.199193] ACPI: bus type PCI registered
    [ 0.199195] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.199264] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.199267] PCI: not using MMCONFIG
    [ 0.199269] PCI: Using configuration type 1 for base access
    [ 0.200095] bio: create slab <bio-0> at 0
    [ 0.200221] ACPI: Added _OSI(Module Device)
    [ 0.200223] ACPI: Added _OSI(Processor Device)
    [ 0.200225] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.200226] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.205589] ACPI: Executed 1 blocks of module-level executable AML code
    [ 0.209306] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.255573] ACPI: SSDT 00000000bcedec18 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.256196] ACPI: Dynamic OEM Table Load:
    [ 0.256198] ACPI: SSDT (null) 0003D3 (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.268541] ACPI: SSDT 00000000bcede618 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.269250] ACPI: Dynamic OEM Table Load:
    [ 0.269253] ACPI: SSDT (null) 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.281706] ACPI: SSDT 00000000bce90d98 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.282323] ACPI: Dynamic OEM Table Load:
    [ 0.282325] ACPI: SSDT (null) 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.295717] ACPI: Interpreter enabled
    [ 0.295726] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
    [ 0.295733] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
    [ 0.295754] ACPI: (supports S0 S3 S4 S5)
    [ 0.295755] ACPI: Using IOAPIC for interrupt routing
    [ 0.295777] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.296299] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in ACPI motherboard resources
    [ 0.307483] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.307717] ACPI: No dock devices found.
    [ 0.403027] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.403034] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.403170] \_SB_.PCI0:_OSC invalid UUID
    [ 0.403171] _OSC request data:1 1f 0
    [ 0.403176] acpi PNP0A08:00: _OSC failed (AE_ERROR); disabling ASPM
    [ 0.403785] PCI host bridge to bus 0000:00
    [ 0.403788] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.403791] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.403793] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.403795] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.403797] pci_bus 0000:00: root bus resource [mem 0x000c0000-0x000c3fff]
    [ 0.403798] pci_bus 0000:00: root bus resource [mem 0x000c4000-0x000c7fff]
    [ 0.403800] pci_bus 0000:00: root bus resource [mem 0x000c8000-0x000cbfff]
    [ 0.403802] pci_bus 0000:00: root bus resource [mem 0x000cc000-0x000cffff]
    [ 0.403804] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.403805] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.403807] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.403809] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.403811] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.403812] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.403814] pci_bus 0000:00: root bus resource [mem 0x000e8000-0x000ebfff]
    [ 0.403816] pci_bus 0000:00: root bus resource [mem 0x000ec000-0x000effff]
    [ 0.403818] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
    [ 0.403827] pci 0000:00:00.0: [8086:0a04] type 00 class 0x060000
    [ 0.403987] pci 0000:00:02.0: [8086:0a16] type 00 class 0x030000
    [ 0.404001] pci 0000:00:02.0: reg 0x10: [mem 0xe3000000-0xe33fffff 64bit]
    [ 0.404009] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff 64bit pref]
    [ 0.404015] pci 0000:00:02.0: reg 0x20: [io 0x5000-0x503f]
    [ 0.404166] pci 0000:00:03.0: [8086:0a0c] type 00 class 0x040300
    [ 0.404176] pci 0000:00:03.0: reg 0x10: [mem 0xe3610000-0xe3613fff 64bit]
    [ 0.404351] pci 0000:00:14.0: [8086:9c31] type 00 class 0x0c0330
    [ 0.404370] pci 0000:00:14.0: reg 0x10: [mem 0xe3600000-0xe360ffff 64bit]
    [ 0.404432] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.404565] pci 0000:00:16.0: [8086:9c3a] type 00 class 0x078000
    [ 0.404585] pci 0000:00:16.0: reg 0x10: [mem 0xe3619000-0xe361901f 64bit]
    [ 0.404648] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.404791] pci 0000:00:1b.0: [8086:9c20] type 00 class 0x040300
    [ 0.404806] pci 0000:00:1b.0: reg 0x10: [mem 0xe3614000-0xe3617fff 64bit]
    [ 0.404871] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.405010] pci 0000:00:1c.0: [8086:9c10] type 01 class 0x060400
    [ 0.405075] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.405213] pci 0000:00:1c.2: [8086:9c14] type 01 class 0x060400
    [ 0.405279] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.405384] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.405417] pci 0000:00:1c.3: [8086:9c16] type 01 class 0x060400
    [ 0.405482] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.405587] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.405620] pci 0000:00:1c.4: [8086:9c18] type 01 class 0x060400
    [ 0.405686] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.405827] pci 0000:00:1d.0: [8086:9c26] type 00 class 0x0c0320
    [ 0.405849] pci 0000:00:1d.0: reg 0x10: [mem 0xe361d000-0xe361d3ff]
    [ 0.405942] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.406061] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.406099] pci 0000:00:1f.0: [8086:9c43] type 00 class 0x060100
    [ 0.406339] pci 0000:00:1f.2: [8086:9c03] type 00 class 0x010601
    [ 0.406355] pci 0000:00:1f.2: reg 0x10: [io 0x5088-0x508f]
    [ 0.406363] pci 0000:00:1f.2: reg 0x14: [io 0x5094-0x5097]
    [ 0.406370] pci 0000:00:1f.2: reg 0x18: [io 0x5080-0x5087]
    [ 0.406378] pci 0000:00:1f.2: reg 0x1c: [io 0x5090-0x5093]
    [ 0.406385] pci 0000:00:1f.2: reg 0x20: [io 0x5060-0x507f]
    [ 0.406393] pci 0000:00:1f.2: reg 0x24: [mem 0xe361c000-0xe361c7ff]
    [ 0.406431] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.406557] pci 0000:00:1f.3: [8086:9c22] type 00 class 0x0c0500
    [ 0.406571] pci 0000:00:1f.3: reg 0x10: [mem 0xe3618000-0xe36180ff 64bit]
    [ 0.406592] pci 0000:00:1f.3: reg 0x20: [io 0xefa0-0xefbf]
    [ 0.406787] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.406893] pci 0000:02:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.406935] pci 0000:02:00.0: reg 0x10: [mem 0xe3500000-0xe3501fff 64bit]
    [ 0.407119] pci 0000:02:00.0: PME# supported from D0 D3hot D3cold
    [ 0.407174] pci 0000:02:00.0: System wakeup disabled by ACPI
    [ 0.411704] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.411710] pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
    [ 0.411794] pci 0000:03:00.0: [10ec:5287] type 00 class 0xff0000
    [ 0.411812] pci 0000:03:00.0: reg 0x10: [mem 0xe3405000-0xe3405fff]
    [ 0.411878] pci 0000:03:00.0: reg 0x30: [mem 0xffff0000-0xffffffff pref]
    [ 0.411944] pci 0000:03:00.0: supports D1 D2
    [ 0.411946] pci 0000:03:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.411991] pci 0000:03:00.0: System wakeup disabled by ACPI
    [ 0.412035] pci 0000:03:00.1: [10ec:8168] type 00 class 0x020000
    [ 0.412052] pci 0000:03:00.1: reg 0x10: [io 0x4000-0x40ff]
    [ 0.412081] pci 0000:03:00.1: reg 0x18: [mem 0xe3404000-0xe3404fff 64bit]
    [ 0.412100] pci 0000:03:00.1: reg 0x20: [mem 0xe3400000-0xe3403fff 64bit]
    [ 0.412177] pci 0000:03:00.1: supports D1 D2
    [ 0.412178] pci 0000:03:00.1: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.418364] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.418368] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
    [ 0.418371] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff]
    [ 0.418458] pci 0000:04:00.0: [10de:0fe4] type 00 class 0x030200
    [ 0.418472] pci 0000:04:00.0: reg 0x10: [mem 0xe2000000-0xe2ffffff]
    [ 0.418487] pci 0000:04:00.0: reg 0x14: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.418502] pci 0000:04:00.0: reg 0x1c: [mem 0xe0000000-0xe1ffffff 64bit pref]
    [ 0.418512] pci 0000:04:00.0: reg 0x24: [io 0x3000-0x307f]
    [ 0.418523] pci 0000:04:00.0: reg 0x30: [mem 0xfff80000-0xffffffff pref]
    [ 0.425027] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 0.425031] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.425034] pci 0000:00:1c.4: bridge window [mem 0xe2000000-0xe2ffffff]
    [ 0.425040] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 0.438876] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.438935] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.438989] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439041] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439093] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439145] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439197] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.439248] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.452346] ACPI: Enabled 5 GPEs in block 00 to 7F
    [ 0.452355] ACPI: \_SB_.PCI0: notify handler is installed
    [ 0.452440] Found 1 acpi root devices
    [ 0.452526] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.452530] vgaarb: loaded
    [ 0.452532] vgaarb: bridge control possible 0000:00:02.0
    [ 0.452565] PCI: Using ACPI for IRQ routing
    [ 0.453935] PCI: pci_cache_line_size set to 64 bytes
    [ 0.454004] e820: reserve RAM buffer [mem 0x00058000-0x0005ffff]
    [ 0.454006] e820: reserve RAM buffer [mem 0x0009d000-0x0009ffff]
    [ 0.454007] e820: reserve RAM buffer [mem 0xa611e000-0xa7ffffff]
    [ 0.454009] e820: reserve RAM buffer [mem 0xa7116018-0xa7ffffff]
    [ 0.454011] e820: reserve RAM buffer [mem 0xa7124018-0xa7ffffff]
    [ 0.454012] e820: reserve RAM buffer [mem 0xba6f9000-0xbbffffff]
    [ 0.454014] e820: reserve RAM buffer [mem 0xbd000000-0xbfffffff]
    [ 0.454016] e820: reserve RAM buffer [mem 0x23f600000-0x23fffffff]
    [ 0.454099] NetLabel: Initializing
    [ 0.454100] NetLabel: domain hash size = 128
    [ 0.454101] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.454114] NetLabel: unlabeled traffic allowed by default
    [ 0.454127] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.454133] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.456157] Switched to clocksource hpet
    [ 0.461039] pnp: PnP ACPI init
    [ 0.461055] ACPI: bus type PNP registered
    [ 0.461144] system 00:00: [io 0x04d0-0x04d1] has been reserved
    [ 0.461150] system 00:00: [mem 0xfe800000-0xfe802fff] has been reserved
    [ 0.461154] system 00:00: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.461172] pnp 00:01: [dma 4]
    [ 0.461188] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
    [ 0.461211] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
    [ 0.461322] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
    [ 0.461362] system 00:04: [io 0x0680-0x069f] has been reserved
    [ 0.461364] system 00:04: [io 0xffff] has been reserved
    [ 0.461366] system 00:04: [io 0xffff] has been reserved
    [ 0.461368] system 00:04: [io 0xffff] has been reserved
    [ 0.461371] system 00:04: [io 0x1800-0x18fe] could not be reserved
    [ 0.461373] system 00:04: [io 0x164e-0x164f] has been reserved
    [ 0.461375] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.461424] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.461470] system 00:06: [io 0x1854-0x1857] has been reserved
    [ 0.461473] system 00:06: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.461551] pnp 00:07: Plug and Play ACPI device, IDs PNP0303 (active)
    [ 0.461612] pnp 00:08: Plug and Play ACPI device, IDs DLL05f9 SYN0600 SYN0002 PNP0f13 (active)
    [ 0.461752] system 00:09: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.461754] system 00:09: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.461756] system 00:09: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.461758] system 00:09: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.461761] system 00:09: [mem 0xf8000000-0xfbffffff] could not be reserved
    [ 0.461763] system 00:09: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.461765] system 00:09: [mem 0xfed90000-0xfed93fff] has been reserved
    [ 0.461767] system 00:09: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.461769] system 00:09: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.461771] system 00:09: [mem 0xfee00000-0xfeefffff] has been reserved
    [ 0.461774] system 00:09: [mem 0xbfa10000-0xbfa1ffff] has been reserved
    [ 0.461776] system 00:09: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.492900] system 00:0a: [mem 0xfe102000-0xfe102fff] has been reserved
    [ 0.492904] system 00:0a: [mem 0xfe104000-0xfe104fff] has been reserved
    [ 0.492907] system 00:0a: [mem 0xfe106000-0xfe106fff] has been reserved
    [ 0.492909] system 00:0a: [mem 0xfe108000-0xfe108fff] has been reserved
    [ 0.492911] system 00:0a: [mem 0xfe10a000-0xfe10afff] has been reserved
    [ 0.492913] system 00:0a: [mem 0xfe10c000-0xfe10cfff] has been reserved
    [ 0.492915] system 00:0a: [mem 0xfe10e000-0xfe10efff] has been reserved
    [ 0.492917] system 00:0a: [mem 0xfe112000-0xfe112fff] has been reserved
    [ 0.492920] system 00:0a: [mem 0xfe111000-0xfe111007] has been reserved
    [ 0.492922] system 00:0a: [mem 0xfe111014-0xfe111fff] has been reserved
    [ 0.492926] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.519796] pnp 00:0b: Plug and Play ACPI device, IDs SMO8810 (active)
    [ 0.533124] pnp: PnP ACPI: found 12 devices
    [ 0.533126] ACPI: bus type PNP unregistered
    [ 0.539394] pci 0000:03:00.0: no compatible bridge window for [mem 0xffff0000-0xffffffff pref]
    [ 0.539397] pci 0000:04:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
    [ 0.539432] pci 0000:00:1c.3: BAR 15: assigned [mem 0xbfb00000-0xbfbfffff pref]
    [ 0.539435] pci 0000:00:1c.0: PCI bridge to [bus 01]
    [ 0.539446] pci 0000:00:1c.2: PCI bridge to [bus 02]
    [ 0.539451] pci 0000:00:1c.2: bridge window [mem 0xe3500000-0xe35fffff]
    [ 0.539463] pci 0000:03:00.0: BAR 6: assigned [mem 0xbfb00000-0xbfb0ffff pref]
    [ 0.539466] pci 0000:00:1c.3: PCI bridge to [bus 03]
    [ 0.539468] pci 0000:00:1c.3: bridge window [io 0x4000-0x4fff]
    [ 0.539473] pci 0000:00:1c.3: bridge window [mem 0xe3400000-0xe34fffff]
    [ 0.539477] pci 0000:00:1c.3: bridge window [mem 0xbfb00000-0xbfbfffff pref]
    [ 0.539483] pci 0000:04:00.0: BAR 6: can't assign mem pref (size 0x80000)
    [ 0.539486] pci 0000:00:1c.4: PCI bridge to [bus 04]
    [ 0.539488] pci 0000:00:1c.4: bridge window [io 0x3000-0x3fff]
    [ 0.539493] pci 0000:00:1c.4: bridge window [mem 0xe2000000-0xe2ffffff]
    [ 0.539497] pci 0000:00:1c.4: bridge window [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 0.539503] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.539505] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.539507] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.539509] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
    [ 0.539511] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
    [ 0.539513] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
    [ 0.539515] pci_bus 0000:00: resource 10 [mem 0x000cc000-0x000cffff]
    [ 0.539517] pci_bus 0000:00: resource 11 [mem 0x000d0000-0x000d3fff]
    [ 0.539518] pci_bus 0000:00: resource 12 [mem 0x000d4000-0x000d7fff]
    [ 0.539520] pci_bus 0000:00: resource 13 [mem 0x000d8000-0x000dbfff]
    [ 0.539522] pci_bus 0000:00: resource 14 [mem 0x000dc000-0x000dffff]
    [ 0.539524] pci_bus 0000:00: resource 15 [mem 0x000e0000-0x000e3fff]
    [ 0.539526] pci_bus 0000:00: resource 16 [mem 0x000e4000-0x000e7fff]
    [ 0.539527] pci_bus 0000:00: resource 17 [mem 0x000e8000-0x000ebfff]
    [ 0.539529] pci_bus 0000:00: resource 18 [mem 0x000ec000-0x000effff]
    [ 0.539531] pci_bus 0000:00: resource 19 [mem 0xbfa00000-0xfeafffff]
    [ 0.539533] pci_bus 0000:02: resource 1 [mem 0xe3500000-0xe35fffff]
    [ 0.539535] pci_bus 0000:03: resource 0 [io 0x4000-0x4fff]
    [ 0.539537] pci_bus 0000:03: resource 1 [mem 0xe3400000-0xe34fffff]
    [ 0.539539] pci_bus 0000:03: resource 2 [mem 0xbfb00000-0xbfbfffff pref]
    [ 0.539541] pci_bus 0000:04: resource 0 [io 0x3000-0x3fff]
    [ 0.539543] pci_bus 0000:04: resource 1 [mem 0xe2000000-0xe2ffffff]
    [ 0.539545] pci_bus 0000:04: resource 2 [mem 0xd0000000-0xe1ffffff 64bit pref]
    [ 0.539577] NET: Registered protocol family 2
    [ 0.539768] TCP established hash table entries: 65536 (order: 7, 524288 bytes)
    [ 0.539937] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.540076] TCP: Hash tables configured (established 65536 bind 65536)
    [ 0.540097] TCP: reno registered
    [ 0.540110] UDP hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.540141] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes)
    [ 0.540216] NET: Registered protocol family 1
    [ 0.540228] pci 0000:00:02.0: Boot video device
    [ 0.540306] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.540308] pci 0000:00:14.0: PCI INT A: no GSI
    [ 0.540406] pci 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.540596] PCI: CLS 64 bytes, default 64
    [ 0.540638] Unpacking initramfs...
    [ 0.613961] Freeing initrd memory: 3204K (ffff88007fcdf000 - ffff880080000000)
    [ 0.613966] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.613969] software IO TLB [mem 0xb61b3000-0xba1b3000] (64MB) mapped at [ffff8800b61b3000-ffff8800ba1b2fff]
    [ 0.614132] Scanning for low memory corruption every 60 seconds
    [ 0.614413] audit: initializing netlink socket (disabled)
    [ 0.614424] type=2000 audit(1396028730.569:1): initialized
    [ 0.630220] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.631594] zbud: loaded
    [ 0.631777] VFS: Disk quotas dquot_6.5.2
    [ 0.631820] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.631982] msgmni has been set to 15770
    [ 0.632038] Key type big_key registered
    [ 0.632238] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.632273] io scheduler noop registered
    [ 0.632275] io scheduler deadline registered
    [ 0.632301] io scheduler cfq registered (default)
    [ 0.632797] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.632812] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.632861] efifb: probing for efifb
    [ 0.634403] efifb: framebuffer at 0xc0000000, mapped to 0xffffc90004f00000, using 8100k, total 8100k
    [ 0.634405] efifb: mode is 1920x1080x32, linelength=7680, pages=1
    [ 0.634406] efifb: scrolling: redraw
    [ 0.634408] efifb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.640993] Console: switching to colour frame buffer device 240x67
    [ 0.647481] fb0: EFI VGA frame buffer device
    [ 0.647490] intel_idle: MWAIT substates: 0x11142120
    [ 0.647491] intel_idle: v0.4 model 0x45
    [ 0.647492] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 0.647675] GHES: HEST is not enabled!
    [ 0.647727] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 0.648142] Linux agpgart interface v0.103
    [ 0.648200] rtc_cmos 00:05: RTC can wake from S4
    [ 0.648326] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
    [ 0.648354] rtc_cmos 00:05: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 0.648365] Intel P-state driver initializing.
    [ 0.648375] Intel pstate controlling: cpu 0
    [ 0.648400] Intel pstate controlling: cpu 1
    [ 0.648412] Intel pstate controlling: cpu 2
    [ 0.648421] Intel pstate controlling: cpu 3
    [ 0.648546] drop_monitor: Initializing network drop monitor service
    [ 0.648595] TCP: cubic registered
    [ 0.648677] NET: Registered protocol family 10
    [ 0.648811] NET: Registered protocol family 17
    [ 0.648818] Key type dns_resolver registered
    [ 0.649004] registered taskstats version 1
    [ 0.649644] Magic number: 6:126:796
    [ 0.649712] rtc_cmos 00:05: setting system clock to 2014-03-28 17:45:31 UTC (1396028731)
    [ 0.649748] PM: Hibernation image not present or could not be loaded.
    [ 0.650354] Freeing unused kernel memory: 1128K (ffffffff818d3000 - ffffffff819ed000)
    [ 0.650355] Write protecting the kernel read-only data: 8192k
    [ 0.652045] Freeing unused kernel memory: 860K (ffff880002529000 - ffff880002600000)
    [ 0.652685] Freeing unused kernel memory: 372K (ffff8800027a3000 - ffff880002800000)
    [ 0.657971] random: systemd-tmpfile urandom read with 1 bits of entropy available
    [ 0.658953] systemd-udevd[56]: starting version 211
    [ 0.671084] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 0.675200] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 0.675211] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 0.679063] ACPI: bus type USB registered
    [ 0.679140] usbcore: registered new interface driver usbfs
    [ 0.679147] usbcore: registered new interface driver hub
    [ 0.679183] usbcore: registered new device driver usb
    [ 0.679907] rtsx_pci 0000:03:00.0: irq 56 for MSI/MSI-X
    [ 0.679921] rtsx_pci 0000:03:00.0: rtsx_pci_acquire_irq: pcr->msi_en = 1, pci->irq = 56
    [ 0.680383] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 0.680779] xhci_hcd 0000:00:14.0: can't derive routing for PCI INT A
    [ 0.680781] xhci_hcd 0000:00:14.0: PCI INT A: no GSI
    [ 0.680814] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.680820] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 1
    [ 0.680893] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 0.680910] xhci_hcd 0000:00:14.0: irq 57 for MSI/MSI-X
    [ 0.681298] SCSI subsystem initialized
    [ 0.682133] ehci-pci: EHCI PCI platform driver
    [ 0.682152] libata version 3.00 loaded.
    [ 0.682614] hub 1-0:1.0: USB hub found
    [ 0.682629] hub 1-0:1.0: 9 ports detected
    [ 0.684167] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 0.684171] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
    [ 0.684312] hub 2-0:1.0: USB hub found
    [ 0.684323] hub 2-0:1.0: 4 ports detected
    [ 0.686657] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 0.686662] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 3
    [ 0.686674] ehci-pci 0000:00:1d.0: debug port 2
    [ 0.690559] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 0.690585] ehci-pci 0000:00:1d.0: irq 23, io mem 0xe361d000
    [ 0.699417] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 0.699600] hub 3-0:1.0: USB hub found
    [ 0.699606] hub 3-0:1.0: 3 ports detected
    [ 0.699755] ahci 0000:00:1f.2: version 3.0
    [ 0.699897] ahci 0000:00:1f.2: irq 58 for MSI/MSI-X
    [ 0.712779] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 4 ports 6 Gbps 0x1 impl SATA mode
    [ 0.712783] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
    [ 0.713215] scsi0 : ahci
    [ 0.713307] scsi1 : ahci
    [ 0.713387] scsi2 : ahci
    [ 0.713484] scsi3 : ahci
    [ 0.713533] ata1: SATA max UDMA/133 abar m2048@0xe361c000 port 0xe361c100 irq 58
    [ 0.713535] ata2: DUMMY
    [ 0.713536] ata3: DUMMY
    [ 0.713537] ata4: DUMMY
    [ 0.716082] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.032692] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.039030] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1.039119] ata1.00: ATA-8: ST1000LM024 HN-M101MBB, 2BA30001, max UDMA/133
    [ 1.039122] ata1.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32)
    [ 1.042744] usb 1-4: new low-speed USB device number 2 using xhci_hcd
    [ 1.045496] ata1.00: ACPI cmd 00/00:00:00:00:00:a0 (NOP) rejected by device (Stat=0x51 Err=0x04)
    [ 1.045588] ata1.00: configured for UDMA/133
    [ 1.045794] scsi 0:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2BA3 PQ: 0 ANSI: 5
    [ 1.047782] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.047862] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.047865] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.047891] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.058547] usb 1-4: config 1 has an invalid interface number: 1 but max is 0
    [ 1.058551] usb 1-4: config 1 has no interface number 0
    [ 1.060336] usb 1-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.063706] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.068657] usbcore: registered new interface driver usbhid
    [ 1.068661] usbhid: USB HID core driver
    [ 1.103349] sda: sda1 sda2 sda3 sda4 sda5 sda6 sda7 sda8 sda9 sda10
    [ 1.104072] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.222575] usb 1-5: new high-speed USB device number 3 using xhci_hcd
    [ 1.475839] usb 1-6: new full-speed USB device number 4 using xhci_hcd
    [ 1.615761] tsc: Refined TSC clocksource calibration: 1795.842 MHz
    [ 1.649158] usb 1-7: new full-speed USB device number 5 using xhci_hcd
    [ 1.664033] usb 1-7: ep 0x2 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 1.672757] input: ELAN Touchscreen as /devices/pci0000:00/0000:00:14.0/usb1/1-7/1-7:1.0/input/input2
    [ 1.672889] hid-multitouch 0003:04F3:0206.0002: input,hiddev0,hidraw0: USB HID v1.10 Device [ELAN Touchscreen] on usb-0000:00:14.0-7/input0
    [ 1.775780] usb 3-1: new high-speed USB device number 2 using ehci-pci
    [ 1.899629] hub 3-1:1.0: USB hub found
    [ 1.899695] hub 3-1:1.0: 8 ports detected
    [ 2.457525] random: nonblocking pool is initialized
    [ 2.615440] Switched to clocksource tsc
    [ 2.647237] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
    [ 3.254903] systemd[1]: systemd 211 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ +SECCOMP -APPARMOR)
    [ 3.255062] systemd[1]: Detected architecture 'x86-64'.
    [ 3.260574] systemd[1]: Set hostname to <GLaDOS>.
    [ 3.894501] systemd[1]: Starting Login Prompts.
    [ 3.894597] systemd[1]: Reached target Login Prompts.
    [ 3.894608] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
    [ 3.894664] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
    [ 3.894672] systemd[1]: Starting Remote File Systems.
    [ 3.894742] systemd[1]: Reached target Remote File Systems.
    [ 3.894756] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
    [ 3.894782] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
    [ 3.894789] systemd[1]: Starting Paths.
    [ 3.894848] systemd[1]: Reached target Paths.
    [ 3.894866] systemd[1]: Starting Arbitrary Executable File Formats File System Automount Point.
    [ 3.895033] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
    [ 3.895044] systemd[1]: Starting Encrypted Volumes.
    [ 3.895105] systemd[1]: Reached target Encrypted Volumes.
    [ 3.895115] systemd[1]: Expecting device dev-disk-by\x2duuid-8cdc5395\x2dad83\x2d429c\x2d95af\x2d73bc6b769621.device...
    [ 3.895196] systemd[1]: Starting EFI System Partition Automount.
    [ 3.895321] systemd[1]: Set up automount EFI System Partition Automount.
    [ 3.895330] systemd[1]: Expecting device dev-disk-by\x2duuid-BE9C\x2dD69C.device...
    [ 3.895395] systemd[1]: Starting Root Slice.
    [ 3.898003] systemd[1]: Created slice Root Slice.
    [ 3.898010] systemd[1]: Starting User and Session Slice.
    [ 3.898131] systemd[1]: Created slice User and Session Slice.
    [ 3.898137] systemd[1]: Starting Device-mapper event daemon FIFOs.
    [ 3.898192] systemd[1]: Listening on Device-mapper event daemon FIFOs.
    [ 3.898197] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
    [ 3.898262] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
    [ 3.898268] systemd[1]: Starting Delayed Shutdown Socket.
    [ 3.898329] systemd[1]: Listening on Delayed Shutdown Socket.
    [ 3.898334] systemd[1]: Starting LVM2 metadata daemon socket.
    [ 3.898386] systemd[1]: Listening on LVM2 metadata daemon socket.
    [ 3.898393] systemd[1]: Starting udev Control Socket.
    [ 3.898437] systemd[1]: Listening on udev Control Socket.
    [ 3.898443] systemd[1]: Starting udev Kernel Socket.
    [ 3.898488] systemd[1]: Listening on udev Kernel Socket.
    [ 3.898494] systemd[1]: Starting Journal Socket.
    [ 3.898549] systemd[1]: Listening on Journal Socket.
    [ 3.898558] systemd[1]: Starting System Slice.
    [ 3.898674] systemd[1]: Created slice System Slice.
    [ 3.898682] systemd[1]: Starting File System Check on Root Device...
    [ 3.898945] systemd[1]: Starting system-systemd\x2dfsck.slice.
    [ 3.899095] systemd[1]: Created slice system-systemd\x2dfsck.slice.
    [ 3.899104] systemd[1]: Mounting Temporary Directory...
    [ 3.917769] systemd[1]: Starting system-getty.slice.
    [ 3.918013] systemd[1]: Created slice system-getty.slice.
    [ 3.956377] systemd[1]: Starting Create list of required static device nodes for the current kernel...
    [ 3.956919] systemd[1]: Mounting Debug File System...
    [ 3.968760] systemd[1]: Starting Apply Kernel Variables...
    [ 3.969194] systemd[1]: Starting udev Coldplug all Devices...
    [ 3.980915] systemd[1]: Started Set Up Additional Binary Formats.
    [ 3.980935] systemd[1]: Starting Setup Virtual Console...
    [ 3.982172] systemd[1]: Started Load Kernel Modules.
    [ 3.982193] systemd[1]: Mounted FUSE Control File System.
    [ 3.982211] systemd[1]: Mounting Configuration File System...
    [ 3.982612] systemd[1]: Mounting Huge Pages File System...
    [ 3.983050] systemd[1]: Mounting POSIX Message Queue File System...
    [ 3.983622] systemd[1]: Starting Journal Service...
    [ 3.984025] systemd[1]: Started Journal Service.
    [ 5.215071] systemd-udevd[143]: starting version 211
    [ 5.215716] EXT4-fs (sda10): re-mounted. Opts: data=ordered
    [ 5.979664] snd_hda_intel 0000:00:1b.0: irq 59 for MSI/MSI-X
    [ 6.251597] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input4
    [ 6.260869] ACPI: Lid Switch [LID0]
    [ 6.260910] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input5
    [ 6.260913] ACPI: Power Button [PWRB]
    [ 6.260940] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input6
    [ 6.260942] ACPI: Sleep Button [SBTN]
    [ 6.260969] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input7
    [ 6.260971] ACPI: Power Button [PWRF]
    [ 6.316336] wmi: Mapper loaded
    [ 6.325574] thermal LNXTHERM:00: registered as thermal_zone0
    [ 6.325577] ACPI: Thermal Zone [THM] (48 C)
    [ 6.325814] ACPI: AC Adapter [AC] (off-line)
    [ 6.325890] ACPI: Battery Slot [BAT0] (battery absent)
    [ 6.355035] [drm] Initialized drm 1.1.0 20060810
    [ 6.398515] input: PC Speaker as /devices/platform/pcspkr/input/input9
    [ 6.511173] input: 2.4GHZ RF ONLY MOUSE as /devices/pci0000:00/0000:00:14.0/usb1/1-4/1-4:1.1/input/input10
    [ 6.511296] hid-generic 0003:1BCF:0535.0001: input,hiddev0,hidraw1: USB HID v1.00 Mouse [2.4GHZ RF ONLY MOUSE] on usb-0000:00:14.0-4/input1
    [ 6.778869] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.1, id: 0x1e2b1, caps: 0xd00123/0x840300/0x127800, board id: 2788, fw id: 1480745
    [ 6.814920] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
    [ 6.935874] mousedev: PS/2 mouse device common for all mice
    [ 6.974228] input: HDA Intel PCH Headphone Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
    [ 6.974578] mei_me 0000:00:16.0: irq 60 for MSI/MSI-X
    [ 6.974609] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 6.978615] ACPI Warning: 0x0000000000001828-0x000000000000182f SystemIO conflicts with Region \PMIO 1 (20131115/utaddress-251)
    [ 6.978620] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.978623] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
    [ 6.978625] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
    [ 6.978628] ACPI Warning: 0x0000000000000830-0x000000000000083f SystemIO conflicts with Region \_SB_.PCI0.RP05.PEGP.GPIO 3 (20131115/utaddress-251)
    [ 6.978629] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.978630] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPRL 1 (20131115/utaddress-251)
    [ 6.978632] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \GPR_ 2 (20131115/utaddress-251)
    [ 6.978634] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \IO_D 3 (20131115/utaddress-251)
    [ 6.978636] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.PCI0.RP05.PEGP.GPIO 4 (20131115/utaddress-251)
    [ 6.978637] ACPI Warning: 0x0000000000000800-0x000000000000082f SystemIO conflicts with Region \_SB_.IOPH 5 (20131115/utaddress-251)
    [ 6.978639] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.978640] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 6.978725] ACPI Warning: 0x000000000000efa0-0x000000000000efbf SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20131115/utaddress-251)
    [ 6.978730] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 6.979647] [drm] Memory usable by graphics device = 2048M
    [ 6.979651] checking generic (c0000000 7e9000) vs hw (c0000000 10000000)
    [ 6.979652] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver
    [ 6.979667] Console: switching to colour dummy device 80x25
    [ 7.027190] i915 0000:00:02.0: irq 61 for MSI/MSI-X
    [ 7.027200] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 7.027201] [drm] Driver supports precise vblank timestamp query.
    [ 7.027320] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 7.080108] cfg80211: Calling CRDA to update world regulatory domain
    [ 7.086677] fbcon: inteldrmfb (fb0) is primary device
    [ 7.168718] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 7.168718] Copyright(c) 2003-2013 Intel Corporation
    [ 7.168873] iwlwifi 0000:02:00.0: irq 62 for MSI/MSI-X
    [ 7.226143] Bluetooth: Core ver 2.17
    [ 7.226154] NET: Registered protocol family 31
    [ 7.226154] Bluetooth: HCI device and connection manager initialized
    [ 7.226160] Bluetooth: HCI socket layer initialized
    [ 7.226161] Bluetooth: L2CAP socket layer initialized
    [ 7.226163] Bluetooth: SCO socket layer initialized
    [ 7.242079] usbcore: registered new interface driver btusb
    [ 7.244675] media: Linux media interface: v0.10
    [ 7.256730] Bluetooth: hci0: read Intel version: 370710018002030d33
    [ 7.256731] Bluetooth: hci0: Intel device is already patched. patch num: 33
    [ 7.259309] Linux video capture interface: v2.00
    [ 7.273794] uvcvideo: Found UVC 1.00 device Integrated_Webcam_HD (0c45:6705)
    [ 7.312920] input: Integrated_Webcam_HD as /devices/pci0000:00/0000:00:14.0/usb1/1-5/1-5:1.0/input/input12
    [ 7.312987] usbcore: registered new interface driver uvcvideo
    [ 7.312988] USB Video Class driver (1.1.1)
    [ 7.374427] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
    [ 7.455740] iTCO_vendor_support: vendor-support=0
    [ 7.478306] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
    [ 7.478331] iTCO_wdt: Found a Lynx Point_LP TCO device (Version=2, TCOBASE=0x1860)
    [ 7.478424] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 7.731609] input: Dell WMI hotkeys as /devices/virtual/input/input13
    [ 8.366783] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 8.740790] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 8.740799] r8169 0000:03:00.1: can't disable ASPM; OS doesn't have ASPM control
    [ 8.746908] r8169 0000:03:00.1: irq 63 for MSI/MSI-X
    [ 8.747108] r8169 0000:03:00.1 eth0: RTL8411 at 0xffffc90004ef6000, e0:db:55:c1:a4:84, XID 1c800880 IRQ 63
    [ 8.747110] r8169 0000:03:00.1 eth0: jumbo features [frames: 9200 bytes, tx checksumming: ko]
    [ 8.749881] Console: switching to colour frame buffer device 240x67
    [ 8.755049] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 8.755050] i915 0000:00:02.0: registered panic notifier
    [ 8.755385] ACPI Exception: AE_NOT_FOUND, Evaluating _DOD (20131115/video-1117)
    [ 8.755388] ACPI: Video Device [PEGP] (multi-head: no rom: yes post: no)
    [ 8.755439] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:2d/LNXVIDEO:00/input/input14
    [ 8.756847] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 8.757196] acpi device:4a: registered as cooling_device4
    [ 8.757318] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input15
    [ 8.757484] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 8.762426] iwlwifi 0000:02:00.0: loaded firmware version 22.24.8.0 op_mode iwlmvm
    [ 8.763348] snd_hda_intel 0000:00:03.0: irq 64 for MSI/MSI-X
    [ 8.810630] iwlwifi 0000:02:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
    [ 8.810704] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 8.810940] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 8.822328] microcode: CPU0 sig=0x40651, pf=0x40, revision=0x17
    [ 8.822359] platform microcode: Direct firmware load failed with error -2
    [ 8.822364] platform microcode: Falling back to user helper
    [ 8.770050] systemd-udevd[156]: renamed network interface eth0 to enp3s0f1
    [ 8.822931] microcode: CPU1 sig=0x40651, pf=0x40, revision=0x17
    [ 8.822943] platform microcode: Direct firmware load failed with error -2
    [ 8.822944] platform microcode: Falling back to user helper
    [ 8.823271] microcode: CPU2 sig=0x40651, pf=0x40, revision=0x17
    [ 8.823284] platform microcode: Direct firmware load failed with error -2
    [ 8.823286] platform microcode: Falling back to user helper
    [ 8.823582] microcode: CPU3 sig=0x40651, pf=0x40, revision=0x17
    [ 8.823590] platform microcode: Direct firmware load failed with error -2
    [ 8.823592] platform microcode: Falling back to user helper
    [ 8.823879] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 9.143183] Adding 16777212k swap on /dev/sda8. Priority:-1 extents:1 across:16777212k FS
    [ 9.194383] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input18
    [ 9.194453] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input17
    [ 9.194518] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
    [ 9.260650] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 9.639211] systemd-journald[126]: Received request to flush runtime journal from PID 1
    [ 9.662917] intel_rapl: domain uncore energy ctr 26416:26416 not working, skip
    [ 17.212850] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 17.213080] iwlwifi 0000:02:00.0: L1 Enabled; Disabling L0S
    [ 17.225790] IPv6: ADDRCONF(NETDEV_UP): wlp2s0: link is not ready
    [ 17.335522] r8169 0000:03:00.1 enp3s0f1: link down
    [ 17.335561] IPv6: ADDRCONF(NETDEV_UP): enp3s0f1: link is not ready
    [ 18.882354] bbswitch: version 0.8
    [ 18.882360] bbswitch: Found integrated VGA device 0000:00:02.0: \_SB_.PCI0.GFX0
    [ 18.882367] bbswitch: Found discrete VGA device 0000:04:00.0: \_SB_.PCI0.RP05.PEGP
    [ 9.289785] systemd-udevd[150]: renamed network interface wlan0 to wlp2s0
    [ 18.882376] ACPI Warning: \_SB_.PCI0.RP05.PEGP._DSM:
    [ 18.882379] Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20131115/nsarguments-95)
    [ 18.882497] bbswitch: detected an Optimus _DSM function
    [ 18.882511] pci 0000:04:00.0: enabling device (0006 -> 0007)
    [ 18.882569] bbswitch: Succesfully loaded. Discrete card 0000:04:00.0 is on
    [ 18.884220] bbswitch: disabling discrete graphics
    [ 18.884227] ACPI Warning

    Hi, I have the same laptop and had the same problem.
    I have solved it by adding the following arguments to the kernel command line:
    acpi_osi=Linux acpi_backlight=vendor
    Note: acpi_osi only did the trick, but then the backlight service fails. acpi_backlight fixes the service.

  • [SOLVED] "Loading Modules" Slow after Latest Upgrade (EeePC 901)

    After the latest upgrade, my EeePC is taking an incredibly long time (20+ seconds) at the "Loading Modules" stage of the boot process. I cannot find any error messages, and after the pause, the machine boots normally. This process used to be almost instantantaneous before the upgrade. The modules being loaded are rfkill and eeepc_laptop.
    Can anyone help?
    Thanks in advance
    Last edited by myrlin (2011-06-27 10:28:21)

    Hi Jason, thank you for helping me.
    Here is my rc.conf:
    # /etc/rc.conf - Main Configuration for Arch Linux
    # LOCALIZATION
    # LOCALE: available languages can be listed with the 'locale -a' command
    # DAEMON_LOCALE: If set to 'yes', use $LOCALE as the locale during daemon
    # startup and during the boot process. If set to 'no', the C locale is used.
    # HARDWARECLOCK: set to "UTC" or "localtime", any other value will result
    # in the hardware clock being left untouched (useful for virtualization)
    # Note: Using "localtime" is discouraged.
    # TIMEZONE: timezones are found in /usr/share/zoneinfo
    # KEYMAP: keymaps are found in /usr/share/kbd/keymaps
    # CONSOLEFONT: found in /usr/share/kbd/consolefonts (only needed for non-US)
    # CONSOLEMAP: found in /usr/share/kbd/consoletrans
    # USECOLOR: use ANSI color sequences in startup messages
    # VERBOSE: Verbose level (from 1 to 8). man 3 syslog for level info
    LOCALE="en_GB.UTF-8"
    DAEMON_LOCALE="no"
    HARDWARECLOCK="UTC"
    TIMEZONE="Europe/London"
    KEYMAP="uk"
    CONSOLEFONT=
    CONSOLEMAP=
    USECOLOR="yes"
    VERBOSE="3"
    # HARDWARE
    # MODULES: Modules to load at boot-up. Blacklisting is no longer supported.
    # Replace every !module by an entry as on the following line in a file in
    # /etc/modprobe.d:
    # blacklist module
    # See "man modprobe.conf" for details.
    MOD_AUTOLOAD="yes"
    MODULES=(rfkill eeepc_laptop)
    # Udev settle timeout (default to 30)
    UDEV_TIMEOUT=30
    # Scan for FakeRAID (dmraid) Volumes at startup
    USEDMRAID="no"
    # Scan for BTRFS volumes at startup
    USEBTRFS="no"
    # Scan for LVM volume groups at startup, required if you use LVM
    USELVM="no"
    # NETWORKING
    # HOSTNAME: Hostname of machine. Should also be put in /etc/hosts
    HOSTNAME="eeepc"
    # Use 'ip addr' or 'ls /sys/class/net/' to see all available interfaces.
    # Wired network setup
    # - interface: name of device (required)
    # - address: IP address (leave blank for DHCP)
    # - netmask: subnet mask (ignored for DHCP)
    # - gateway: default route (ignored for DHCP)
    # Static IP example
    # interface=eth0
    # address=192.168.0.2
    # netmask=255.255.255.0
    # gateway=192.168.0.1
    # DHCP example
    # interface=eth0
    # address=
    # netmask=
    # gateway=
    interface=eth0
    address=
    netmask=
    gateway=
    # Setting this to "yes" will skip network shutdown.
    # This is required if your root device is on NFS.
    NETWORK_PERSIST="no"
    # Enable these netcfg profiles at boot-up. These are useful if you happen to
    # need more advanced network features than the simple network service
    # supports, such as multiple network configurations (ie, laptop users)
    # - set to 'menu' to present a menu during boot-up (dialog package required)
    # - prefix an entry with a ! to disable it
    # Network profiles are found in /etc/network.d
    # This requires the netcfg package
    #NETWORKS=(main)
    # DAEMONS
    # Daemons to start at boot-up (in this order)
    # - prefix a daemon with a ! to disable it
    # - prefix a daemon with a @ to start it up in the background
    # If something other takes care of your hardware clock (ntpd, dual-boot...)
    # you should disable 'hwclock' here.
    DAEMONS=(syslog-ng dbus hal networkmanager privoxy netfs rfkill eeepc_laptop @ufw @crond @alsa !bluetooth @samba @cups)
    Here is my blacklist.conf (I have restored the framebuffer one):
    blacklist rt2800pci
    blacklist rt61pci
    blacklist rt2x00pci
    blacklist rt2800usb
    blacklist rt2800lib
    blacklist rt2x00usb
    blacklist rt2x00lib
    And here is the output of lsmod:
    Module Size Used by
    fuse 58669 3
    ipt_REJECT 2029 1
    ipt_LOG 6518 5
    xt_multiport 1498 2
    xt_limit 1423 7
    xt_tcpudp 1883 7
    xt_addrtype 2393 4
    nf_conntrack_ipv4 9601 7
    nf_defrag_ipv4 1023 1 nf_conntrack_ipv4
    xt_state 971 7
    ip6table_filter 1072 1
    ip6_tables 10461 1 ip6table_filter
    ipv6 249260 12
    nf_conntrack_netbios_ns 801 0
    nf_conntrack_broadcast 961 1 nf_conntrack_netbios_ns
    nf_conntrack_pptp 3857 0
    nf_conntrack_proto_gre 3241 1 nf_conntrack_pptp
    nf_conntrack 50208 6 nf_conntrack_ipv4,xt_state,nf_conntrack_netbios_ns,nf_conntrack_broadcast,nf_conntrack_pptp,nf_conntrack_proto_gre
    iptable_filter 1100 1
    ip_tables 9186 1 iptable_filter
    x_tables 11774 11 ipt_REJECT,ipt_LOG,xt_multiport,xt_limit,xt_tcpudp,xt_addrtype,xt_state,ip6table_filter,ip6_tables,iptable_filter,ip_tables
    btusb 9897 0
    bluetooth 115465 1 btusb
    uvcvideo 55020 0
    videodev 70734 1 uvcvideo
    media 8545 1 videodev
    joydev 7535 0
    snd_hda_codec_realtek 225687 1
    i915 557262 2
    snd_hda_intel 19261 1
    snd_hda_codec 66793 2 snd_hda_codec_realtek,snd_hda_intel
    snd_hwdep 4919 1 snd_hda_codec
    drm_kms_helper 24245 1 i915
    snd_pcm 60311 2 snd_hda_intel,snd_hda_codec
    drm 147653 3 i915,drm_kms_helper
    uhci_hcd 19344 0
    snd_timer 15542 1 snd_pcm
    ehci_hcd 34847 0
    rt2860sta 479236 1
    intel_agp 8664 1 i915
    psmouse 55927 0
    snd 43527 8 snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer
    usbcore 119004 5 btusb,uvcvideo,uhci_hcd,ehci_hcd
    i2c_algo_bit 4431 1 i915
    iTCO_wdt 10333 0
    i2c_i801 7039 0
    serio_raw 3430 0
    pcspkr 1415 0
    sg 21022 0
    i2c_core 16665 6 videodev,i915,drm_kms_helper,drm,i2c_algo_bit,i2c_i801
    evdev 7310 15
    intel_gtt 11417 3 i915,intel_agp
    crc_ccitt 1103 1 rt2860sta
    iTCO_vendor_support 1553 1 iTCO_wdt
    soundcore 5018 1 snd
    battery 8905 0
    processor 21884 0
    eeepc_laptop 12452 0
    atl1e 24804 0
    button 3654 1 i915
    sparse_keymap 2636 1 eeepc_laptop
    thermal 6603 0
    ac 2545 0
    video 9852 1 i915
    snd_page_alloc 5909 2 snd_hda_intel,snd_pcm
    pci_hotplug 21978 1 eeepc_laptop
    agpgart 22160 3 drm,intel_agp,intel_gtt
    rfkill 12510 2 bluetooth,eeepc_laptop
    ext4 334626 3
    mbcache 4321 1 ext4
    jbd2 59098 1 ext4
    crc16 1077 2 bluetooth,ext4
    sd_mod 25515 5
    ata_piix 18569 3
    pata_acpi 2396 0
    libata 154349 2 ata_piix,pata_acpi
    scsi_mod 110670 3 sg,sd_mod,libata
    I hope this all means more to you than it does to me!!!!

Maybe you are looking for