[SOLVED] Nouveau vs Nvidia in regards to Twinview

Hello all. I have a laptop that has an nvidia video card, using the proprietary nvidia driver. I also use a docking station, so I have Twinview set up so that it shows the same thing on both screens so when docked I'll see something on the external monitor (without Twinview, this curiously doesn't work).
I'm considering switching to the nouveau driver, so that I can get KMS like Intel users get. But I've heard that Twinview doesn't work with nouveau, or at least it didn't used to. In addition, the wiki mentions that 3D support in Nouveau is experimental, so that scares me a bit, but then again, I'm not sure if that's old info or if that is still the case. I use 3D effects for Kwin and open source games such as Neverball and Tux Racer. Is using Nouveau still as experimental as the wiki mentions? Does it still not work with Twinview?
Last edited by jlacroix (2012-03-23 01:50:39)

I recently installed arch on a (very) old computer at the office.  It has a nvidia card.  I first went with nouveau but once everything was up and running I switched to nvidia.  I also missed KMS, but (and I don't really know how this all works) once it sets the mode while starting X, even after I close my x sessions or change to another tty, that tty is in the higher resolution.
This leads me to my question: What's the benefit of KMS?  Other than, perhaps, a little bit prettier boot sequence, you can still get the good resolution ttys once fully booted.
EDIT: This may be a completely ignorant question - feel free to tell me if it is.
Last edited by Trilby (2012-03-22 22:43:19)

Similar Messages

  • [SOLVED] can't update system because nouveau and nvidia conflicting?

    Hi folks-
    I am trying to update and am getting an error message that I'm not sure how to resolve.
    [sarai@arch ~]$ sudo pacman -Syu
    [sudo] password for sarai:
    :: Synchronizing package databases...
    core is up to date
    extra 1424.6 KiB 846K/s 00:02 [######################] 100%
    community 1777.4 KiB 998K/s 00:02 [######################] 100%
    multilib 90.8 KiB 187K/s 00:00 [######################] 100%
    :: Starting full system upgrade...
    :: Replace python-egenix-mx-base with extra/python2-egenix-mx-base? [Y/n] y
    :: Replace python-logilab-astng with extra/python2-logilab-astng? [Y/n] y
    :: Replace python-logilab-common with extra/python2-logilab-common? [Y/n] y
    resolving dependencies...
    looking for inter-conflicts...
    warning: removing 'libgl' from target list because it conflicts with 'nvidia-utils'
    error: failed to prepare transaction (could not satisfy dependencies)
    :: nouveau-dri: requires libgl=9.0
    A little bit aggravating, it kindly removes libgl from the list because of a conflict then fails out because it's required.
    I used nouveau as my graphics driver for a year or two when I first set up this system, but it started giving me weird slowdowns and errors so I tried switching to the proprietary drivers (I know, shame shame) which fixed it. I'm not surprised that they're not compatible, but when I tried to figure out how to remove nouveau I see that it is built into the kernel? I followed the directions as explicitly as possible when installing nvidia so I'm not sure where I went wrong.
    Right now, I can't upgrade and I would really like to avoid the pitfall of just blacklisting nouveau-dri. I'd rather invest the work into actually fixing the problem.
    I would appreciate any advice.
    Last edited by Sarai (2012-11-01 23:07:44)

    karol wrote:
    IIRC since version 1.0.2-2 xf86-video-nouveau depends on nouveau-dri which in turn depends on libgl which conflicts with nvidia because Nvidia provides their own libgl implementation.
    This might help: https://wiki.archlinux.org/index.php/Nv … au_drivers
    Thank you, that was quite helpful. The script to switch from nouveau to nvidia includes the line to remove the packages libgl, nouveau-dri, and xf86-video-nouveau. I tried running just that line and it failed out because nouveau-dri and libgl aren't actually installed. How irritating! However, I was able to remove xf86-video-nouveau, and after that pacman has gotten past the dependency check and is installing packages so I think this is fixed.
    Big kudos for all the help, marking this solved.

  • [SOLVED] Refresh rate, nvidia and Quake Live

    I need help setting my monitor to 120HZ for 640*480, i have no idea how to do this using xorg.conf or nvidia-settings... nvidia-settings only shows as high as 85hz for this resolution. I'm not gonna be mean and say how simple doing this is in windows(guess i just did) Sorry ^^.
    I'm using a ViewSonic E70   17" CRT monitor and a Geforce4 mx420 with the nvidia-96xx proprietary driver from the repos.
    I really need 640*480 to get to 120 hz, should be simple enough!
    Thanks!
    Last edited by yumyum (2011-01-27 16:44:43)

    MoonSwan wrote:
    If you look at the Nvidia docs it says in there somewhere why each monitor has a "unique" refresh rate.  It boils down to X is too stupid to do real dual monitors.  As a result, Nvidia presents to X two "separate" monitors; it differentiates them to X by using different refresh rates...thus you cannot (and should not even try) to set the monitors to use the same refresh rate.
    I'd suggest using nvidia-utils or nvidia-setup (not sure of the name but it will autocomplete on the command line if you just type "nvidia-") to set up twinview or separate X sessions or whatever you want.  It's easy to use and will even write an xorg.conf for you.  Failing that, look at randr on the wiki.
    i did nvidia-xconfig. and also activated the vsync in nvidia-settings. But no luck. Also when i chose seperate X in nvidia-settings my arch freezes. I am going to do a refresh install.

  • [SOLVED] Libgl and Nvidia-Utils are in conflict with the mos

    :: Synchronizing package databases...
    core is up to date
    extra                   887.1K 1424.1K/s 00:00:01 [-------------------------] 100%
    community               580.2K 1192.7K/s 00:00:00 [-------------------------] 100%
    :: Starting full system upgrade...
    resolving dependencies...
    looking for inter-conflicts...
    :: libgl and nvidia-utils are in conflict. Remove nvidia-utils? [y/N] n
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: libgl and nvidia-utils are in conflict
    I've read threads on this before but this time nvidia-utils is being asked to be removed. I'm not sure if removing nvidia-utils is safe. Before, reading some threads on here, I had to set libgl to ignore to get nvidia-utils to install.
    Thanks.
    Last edited by 6msj (2011-11-02 22:48:25)

    Sorry to bump a dying post but I'm running into this problem upgrading dkms-nvidia.
    ==> Install or build missing dependencies for dkms-nvidia:
    resolving dependencies...
    looking for inter-conflicts...
    :: nvidia-utils and libgl are in conflict. Remove libgl? [y/N] y
    :: nvidia-utils and nvidia-utils-bumblebee are in conflict. Remove nvidia-utils-bumblebee? [y/N] n
    error: unresolvable package conflicts detected
    error: failed to prepare transaction (conflicting dependencies)
    :: nvidia-utils and nvidia-utils-bumblebee are in conflict
    sudo pacman -Rns nvidia-utils
    error: target not found: nvidia-utils
    pacman -Qs dri
    local/bumblebee 3.0.1-4
        Bumblebee brings Optimus Support for Linux Through VirtualGL. You need to install proper drivers separately. Can be used with Nouveau or Nvidia
    local/dkms-nvidia 304.64-1
        NVIDIA dynamic kernel module (DKMS) drivers for kernel26.
    local/dri2proto 2.8-1
        X11 DRI protocol
    local/hdparm 9.43-1
        A shell utility for manipulating Linux IDE drive/driver parameters
    local/intel-dri 9.0.1-1
        Mesa DRI drivers for Intel
    local/lib32-nvidia-utils 310.19-1
        NVIDIA drivers utilities and libraries. (32-bit)
    local/libgl 9.0.1-1
        Mesa 3-D graphics library and DRI software rasterizer
    local/libraw1394 2.0.7-2
        Provides an API to the Linux IEEE1394 (FireWire) driver
    local/libzapojit 0.0.2-1
        GLib/GObject wrapper for the SkyDrive and Hotmail REST APIs
    local/nvidia-utils-bumblebee 304.64-1
        NVIDIA drivers utilities and libraries. With LibGL and xorg modules installed in a different directory.
    local/unetbootin 581-1
        Create bootable Live USB drives
    local/xf86-input-evdev 2.7.3-2 (xorg-drivers xorg)
        X.org evdev input driver
    local/xf86-input-keyboard 1.6.2-2 (xorg-drivers xorg)
        X.Org keyboard input driver
    local/xf86-input-synaptics 1.6.2-2 (xorg-drivers xorg)
        Synaptics driver for notebook touchpads
    local/xf86-video-intel 2.20.14-1 (xorg-drivers xorg)
        X.org Intel i810/i830/i915/945G/G965+ video drivers
    local/xorg-xdriinfo 1.0.4-3 (xorg-apps xorg)
        Query configuration information of DRI drivers
    >wonder wrote:you have intel-dri  installed which has libgl dependency versioned. that package was updated recently and wants a newer libgl but it can't install it because nvidia-utils is installed.solution: pacman -R intel-dri
    My laptop has optimus so intel and nvidia drivers are required, any idea how to proceed?
    Last edited by possiblefool (2012-12-05 12:56:44)

  • [Partly solved] Nouveau driver crashes, nvidia-libgl-beta problem etc.

    I had the same issue as in thread 1446984 but disabling USB 3.0 in BIOS did not solve the problem.
    I have a new install, and are getting complete freezes on shutdown, but also on switching to another tty than the graphical (freeze after 1-20 seconds after switching tty). This is reproducible 100% of the time.
    I were also getting errors about nouveau, and thought the tty switching freezes might be related to that.
    This was correct, since installing the nvidia-beta driver solved that problem (but not the shutdown issues).
    As a side note, I also had some minor problems installing nvidia-libgl-beta which is a dependency for nvidia-beta.
    Trying to install it with aura gave the following error:
    $ sudo aura -A nvidia-libgl-beta
    [sudo] password for rix:
    aura >>= The following are not AUR packages:
    nvidia-libgl-beta
    aura >>= No valid packages specified.
    Installing it manually from the tarball in AUR seemed to work, but when I tried to install nvidia-beta it complained about nvidia-libgl-beta missing, and it's not in the output of pacman -Q !
    Trying to reinstall it works as well, and pacman says it is reinstalling with net upgrade size 0.
    I removed nvidia-libgl-beta as a dependency from the nvidia-beta PKGBUILD and installed it, it seems to work at least, no more tty switch crashes.
    Also, after installing there is no nvidia*.pkg.tar.xz files in /var/cache/pacman/pkg/. Maybe these are put somewhere else?
    dmesg (includes nouveau errors but it's the "ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion ..." line I believe is the interesting one):
    [ 0.000000] Initializing cgroup subsys cpuset
    [ 0.000000] Initializing cgroup subsys cpu
    [ 0.000000] Initializing cgroup subsys cpuacct
    [ 0.000000] Linux version 3.16.1-1-ARCH (nobody@var-lib-archbuild-testing-x86_64-tobias) (gcc version 4.9.1 (GCC) ) #1 SMP PREEMPT Thu Aug 14 07:40:19 CEST 2014
    [ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1a4daa5b-c2e9-44c0-9155-95a9d2c25878 rw cryptdevice=UUID=67ed3f10-6bc9-4413-b567-f9f0111aecf0:cryptroot resume=/dev/mapper/lvm-swapvol quiet
    [ 0.000000] e820: BIOS-provided physical RAM map:
    [ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009d7ff] usable
    [ 0.000000] BIOS-e820: [mem 0x000000000009d800-0x000000000009ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000000e0000-0x00000000000fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x00000000ba004fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba005000-0x00000000ba00bfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000ba00c000-0x00000000ba7abfff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000ba7ac000-0x00000000baa1afff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000baa1b000-0x00000000cb3c9fff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cb3ca000-0x00000000cb453fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cb454000-0x00000000cb46efff] ACPI data
    [ 0.000000] BIOS-e820: [mem 0x00000000cb46f000-0x00000000cb9ddfff] ACPI NVS
    [ 0.000000] BIOS-e820: [mem 0x00000000cb9de000-0x00000000cbffefff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000cbfff000-0x00000000cbffffff] usable
    [ 0.000000] BIOS-e820: [mem 0x00000000cd000000-0x00000000cf1fffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000f8000000-0x00000000fbffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed00000-0x00000000fed03fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fed1c000-0x00000000fed1ffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000fee00000-0x00000000fee00fff] reserved
    [ 0.000000] BIOS-e820: [mem 0x00000000ff000000-0x00000000ffffffff] reserved
    [ 0.000000] BIOS-e820: [mem 0x0000000100000000-0x000000042fdfffff] usable
    [ 0.000000] NX (Execute Disable) protection: active
    [ 0.000000] SMBIOS 2.8 present.
    [ 0.000000] DMI: Micro-Star International Co., Ltd. GS60 2PE/MS-16H2, BIOS E16H2IMS.106 05/13/2014
    [ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
    [ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] e820: last_pfn = 0x42fe00 max_arch_pfn = 0x400000000
    [ 0.000000] MTRR default type: uncachable
    [ 0.000000] MTRR fixed ranges enabled:
    [ 0.000000] 00000-9FFFF write-back
    [ 0.000000] A0000-BFFFF uncachable
    [ 0.000000] C0000-CFFFF write-protect
    [ 0.000000] D0000-E7FFF uncachable
    [ 0.000000] E8000-FFFFF write-protect
    [ 0.000000] MTRR variable ranges enabled:
    [ 0.000000] 0 base 0000000000 mask 7C00000000 write-back
    [ 0.000000] 1 base 0400000000 mask 7FE0000000 write-back
    [ 0.000000] 2 base 0420000000 mask 7FF0000000 write-back
    [ 0.000000] 3 base 00E0000000 mask 7FE0000000 uncachable
    [ 0.000000] 4 base 00D0000000 mask 7FF0000000 uncachable
    [ 0.000000] 5 base 00CE000000 mask 7FFE000000 uncachable
    [ 0.000000] 6 base 00CD000000 mask 7FFF000000 uncachable
    [ 0.000000] 7 base 042FE00000 mask 7FFFE00000 uncachable
    [ 0.000000] 8 disabled
    [ 0.000000] 9 disabled
    [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
    [ 0.000000] e820: update [mem 0xcd000000-0xffffffff] usable ==> reserved
    [ 0.000000] e820: last_pfn = 0xcc000 max_arch_pfn = 0x400000000
    [ 0.000000] found SMP MP-table at [mem 0x000fd770-0x000fd77f] mapped at [ffff8800000fd770]
    [ 0.000000] Scanning 1 areas for low memory corruption
    [ 0.000000] Base memory trampoline at [ffff880000097000] 97000 size 24576
    [ 0.000000] Using GB pages for direct mapping
    [ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
    [ 0.000000] [mem 0x00000000-0x000fffff] page 4k
    [ 0.000000] BRK [0x01b23000, 0x01b23fff] PGTABLE
    [ 0.000000] BRK [0x01b24000, 0x01b24fff] PGTABLE
    [ 0.000000] BRK [0x01b25000, 0x01b25fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x42fc00000-0x42fdfffff]
    [ 0.000000] [mem 0x42fc00000-0x42fdfffff] page 2M
    [ 0.000000] BRK [0x01b26000, 0x01b26fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0x42c000000-0x42fbfffff]
    [ 0.000000] [mem 0x42c000000-0x42fbfffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x400000000-0x42bffffff]
    [ 0.000000] [mem 0x400000000-0x42bffffff] page 2M
    [ 0.000000] init_memory_mapping: [mem 0x00100000-0xba004fff]
    [ 0.000000] [mem 0x00100000-0x001fffff] page 4k
    [ 0.000000] [mem 0x00200000-0x3fffffff] page 2M
    [ 0.000000] [mem 0x40000000-0x7fffffff] page 1G
    [ 0.000000] [mem 0x80000000-0xb9ffffff] page 2M
    [ 0.000000] [mem 0xba000000-0xba004fff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0xba00c000-0xba7abfff]
    [ 0.000000] [mem 0xba00c000-0xba1fffff] page 4k
    [ 0.000000] [mem 0xba200000-0xba5fffff] page 2M
    [ 0.000000] [mem 0xba600000-0xba7abfff] page 4k
    [ 0.000000] BRK [0x01b27000, 0x01b27fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xbaa1b000-0xcb3c9fff]
    [ 0.000000] [mem 0xbaa1b000-0xbabfffff] page 4k
    [ 0.000000] [mem 0xbac00000-0xcb1fffff] page 2M
    [ 0.000000] [mem 0xcb200000-0xcb3c9fff] page 4k
    [ 0.000000] BRK [0x01b28000, 0x01b28fff] PGTABLE
    [ 0.000000] init_memory_mapping: [mem 0xcbfff000-0xcbffffff]
    [ 0.000000] [mem 0xcbfff000-0xcbffffff] page 4k
    [ 0.000000] init_memory_mapping: [mem 0x100000000-0x3ffffffff]
    [ 0.000000] [mem 0x100000000-0x3ffffffff] page 1G
    [ 0.000000] RAMDISK: [mem 0x374fa000-0x37a74fff]
    [ 0.000000] ACPI: Early table checksum verification disabled
    [ 0.000000] ACPI: RSDP 0x00000000000F0490 000024 (v02 MSI_NB)
    [ 0.000000] ACPI: XSDT 0x00000000CB459098 0000B4 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FACP 0x00000000CB466618 00010C (v05 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: DSDT 0x00000000CB4591E0 00D433 (v02 MSI_NB MEGABOOK 00000030 INTL 20120711)
    [ 0.000000] ACPI: FACS 0x00000000CB9DC080 000040
    [ 0.000000] ACPI: APIC 0x00000000CB466728 000092 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: FPDT 0x00000000CB4667C0 000044 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: ASF! 0x00000000CB466808 0000A5 (v32 INTEL HCG 00000001 TFSM 000F4240)
    [ 0.000000] ACPI: MSDM 0x00000000CB4668B0 000055 (v03 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: LPIT 0x00000000CB466908 00005C (v01 MSI_NB MEGABOOK 00000000 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000CB466968 000228 (v01 INTEL sensrhub 00000000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB466B90 00018F (v01 Intel zpodd 00001000 INTL 20120711)
    [ 0.000000] ACPI: SLIC 0x00000000CB466D20 000176 (v01 MSI_NB MEGABOOK 01072009 AMI 00010013)
    [ 0.000000] ACPI: SSDT 0x00000000CB466E98 000575 (v01 PmRef Cpu0Ist 00003000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB467410 000AD8 (v01 PmRef CpuPm 00003000 INTL 20120711)
    [ 0.000000] ACPI: MCFG 0x00000000CB467EE8 00003C (v01 MSI_NB MEGABOOK 01072009 MSFT 00000097)
    [ 0.000000] ACPI: HPET 0x00000000CB467F28 000038 (v01 MSI_NB MEGABOOK 01072009 AMI. 00000005)
    [ 0.000000] ACPI: SSDT 0x00000000CB467F60 000315 (v01 SataRe SataTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: SSDT 0x00000000CB468278 003550 (v01 SaSsdt SaSsdt 00003000 INTL 20091112)
    [ 0.000000] ACPI: SSDT 0x00000000CB46B7C8 00143A (v01 SgRef SgPeg 00001000 INTL 20120711)
    [ 0.000000] ACPI: DMAR 0x00000000CB46CC08 0000B8 (v01 INTEL HSW 00000001 INTL 00000001)
    [ 0.000000] ACPI: SSDT 0x00000000CB46CCC0 001472 (v01 OptRef OptTabl 00001000 INTL 20120711)
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] No NUMA configuration found
    [ 0.000000] Faking a node at [mem 0x0000000000000000-0x000000042fdfffff]
    [ 0.000000] Initmem setup node 0 [mem 0x00000000-0x42fdfffff]
    [ 0.000000] NODE_DATA [mem 0x42fdf6000-0x42fdfafff]
    [ 0.000000] [ffffea0000000000-ffffea0010bfffff] PMD -> [ffff88041f400000-ffff88042f3fffff] on node 0
    [ 0.000000] Zone ranges:
    [ 0.000000] DMA [mem 0x00001000-0x00ffffff]
    [ 0.000000] DMA32 [mem 0x01000000-0xffffffff]
    [ 0.000000] Normal [mem 0x100000000-0x42fdfffff]
    [ 0.000000] Movable zone start for each node
    [ 0.000000] Early memory node ranges
    [ 0.000000] node 0: [mem 0x00001000-0x0009cfff]
    [ 0.000000] node 0: [mem 0x00100000-0xba004fff]
    [ 0.000000] node 0: [mem 0xba00c000-0xba7abfff]
    [ 0.000000] node 0: [mem 0xbaa1b000-0xcb3c9fff]
    [ 0.000000] node 0: [mem 0xcbfff000-0xcbffffff]
    [ 0.000000] node 0: [mem 0x100000000-0x42fdfffff]
    [ 0.000000] On node 0 totalpages: 4173553
    [ 0.000000] DMA zone: 64 pages used for memmap
    [ 0.000000] DMA zone: 21 pages reserved
    [ 0.000000] DMA zone: 3996 pages, LIFO batch:0
    [ 0.000000] DMA32 zone: 12934 pages used for memmap
    [ 0.000000] DMA32 zone: 827733 pages, LIFO batch:31
    [ 0.000000] Normal zone: 52216 pages used for memmap
    [ 0.000000] Normal zone: 3341824 pages, LIFO batch:31
    [ 0.000000] Reserving Intel graphics stolen memory at 0xcd200000-0xcf1fffff
    [ 0.000000] ACPI: PM-Timer IO Port: 0x1808
    [ 0.000000] ACPI: Local APIC address 0xfee00000
    [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x01] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x03] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x05] enabled)
    [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x07] enabled)
    [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0xff] high edge lint[0x1])
    [ 0.000000] ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0])
    [ 0.000000] IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
    [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
    [ 0.000000] ACPI: IRQ0 used by override.
    [ 0.000000] ACPI: IRQ2 used by override.
    [ 0.000000] ACPI: IRQ9 used by override.
    [ 0.000000] Using ACPI (MADT) for SMP configuration information
    [ 0.000000] ACPI: HPET id: 0x8086a701 base: 0xfed00000
    [ 0.000000] smpboot: Allowing 8 CPUs, 0 hotplug CPUs
    [ 0.000000] nr_irqs_gsi: 40
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009d000-0x0009dfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x0009e000-0x0009ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000dffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0x000e0000-0x000fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba005000-0xba00bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xba7ac000-0xbaa1afff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb3ca000-0xcb453fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb454000-0xcb46efff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb46f000-0xcb9ddfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcb9de000-0xcbffefff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcc000000-0xccffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcd000000-0xcf1fffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xcf200000-0xf7ffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xf8000000-0xfbffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfc000000-0xfebfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec00000-0xfec00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfec01000-0xfecfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed00000-0xfed03fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed04000-0xfed1bfff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed1c000-0xfed1ffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfed20000-0xfedfffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee00000-0xfee00fff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xfee01000-0xfeffffff]
    [ 0.000000] PM: Registered nosave memory: [mem 0xff000000-0xffffffff]
    [ 0.000000] e820: [mem 0xcf200000-0xf7ffffff] available for PCI devices
    [ 0.000000] Booting paravirtualized kernel on bare hardware
    [ 0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
    [ 0.000000] PERCPU: Embedded 29 pages/cpu @ffff88042fa00000 s86784 r8192 d23808 u262144
    [ 0.000000] pcpu-alloc: s86784 r8192 d23808 u262144 alloc=1*2097152
    [ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
    [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 4108318
    [ 0.000000] Policy zone: Normal
    [ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1a4daa5b-c2e9-44c0-9155-95a9d2c25878 rw cryptdevice=UUID=67ed3f10-6bc9-4413-b567-f9f0111aecf0:cryptroot resume=/dev/mapper/lvm-swapvol quiet
    [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
    [ 0.000000] xsave: enabled xstate_bv 0x7, cntxt size 0x340
    [ 0.000000] AGP: Checking aperture...
    [ 0.000000] AGP: No AGP bridge found
    [ 0.000000] Calgary: detecting Calgary via BIOS EBDA area
    [ 0.000000] Calgary: Unable to locate Rio Grande table in EBDA - bailing!
    [ 0.000000] Memory: 16347668K/16694212K available (5334K kernel code, 887K rwdata, 1688K rodata, 1128K init, 1164K bss, 346544K reserved)
    [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
    [ 0.000000] Preemptible hierarchical RCU implementation.
    [ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
    [ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
    [ 0.000000] RCU restricting CPUs from NR_CPUS=128 to nr_cpu_ids=8.
    [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
    [ 0.000000] NR_IRQS:8448 nr_irqs:744 16
    [ 0.000000] Console: colour dummy device 80x25
    [ 0.000000] console [tty0] enabled
    [ 0.000000] allocated 67108864 bytes of page_cgroup
    [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
    [ 0.000000] hpet clockevent registered
    [ 0.000000] tsc: Fast TSC calibration using PIT
    [ 0.000000] tsc: Detected 2494.320 MHz processor
    [ 0.000022] Calibrating delay loop (skipped), value calculated using timer frequency.. 4990.50 BogoMIPS (lpj=8314400)
    [ 0.000024] pid_max: default: 32768 minimum: 301
    [ 0.000029] ACPI: Core revision 20140424
    [ 0.009832] ACPI: All ACPI Tables successfully acquired
    [ 0.010517] Security Framework initialized
    [ 0.010521] Yama: becoming mindful.
    [ 0.011207] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes)
    [ 0.013363] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes)
    [ 0.014280] Mount-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.014292] Mountpoint-cache hash table entries: 32768 (order: 6, 262144 bytes)
    [ 0.014481] Initializing cgroup subsys memory
    [ 0.014494] Initializing cgroup subsys devices
    [ 0.014498] Initializing cgroup subsys freezer
    [ 0.014500] Initializing cgroup subsys net_cls
    [ 0.014502] Initializing cgroup subsys blkio
    [ 0.014521] CPU: Physical Processor ID: 0
    [ 0.014521] CPU: Processor Core ID: 0
    [ 0.014525] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
    ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
    [ 0.015291] mce: CPU supports 9 MCE banks
    [ 0.015301] CPU0: Thermal monitoring enabled (TM1)
    [ 0.015311] Last level iTLB entries: 4KB 1024, 2MB 1024, 4MB 1024
    Last level dTLB entries: 4KB 1024, 2MB 1024, 4MB 1024, 1GB 4
    tlb_flushall_shift: 6
    [ 0.015382] Freeing SMP alternatives memory: 20K (ffffffff819f9000 - ffffffff819fe000)
    [ 0.015942] ftrace: allocating 20434 entries in 80 pages
    [ 0.022339] dmar: Host address width 39
    [ 0.022341] dmar: DRHD base: 0x000000fed90000 flags: 0x0
    [ 0.022348] dmar: IOMMU 0: reg_base_addr fed90000 ver 1:0 cap c0000020660462 ecap f0101a
    [ 0.022349] dmar: DRHD base: 0x000000fed91000 flags: 0x1
    [ 0.022352] dmar: IOMMU 1: reg_base_addr fed91000 ver 1:0 cap d2008020660462 ecap f010da
    [ 0.022353] dmar: RMRR base: 0x000000cbe94000 end: 0x000000cbea2fff
    [ 0.022354] dmar: RMRR base: 0x000000cd000000 end: 0x000000cf1fffff
    [ 0.022418] IOAPIC id 8 under DRHD base 0xfed91000 IOMMU 1
    [ 0.022419] HPET id 0 under DRHD base 0xfed91000
    [ 0.022420] Queued invalidation will be enabled to support x2apic and Intr-remapping.
    [ 0.022530] Enabled IRQ remapping in x2apic mode
    [ 0.022531] Enabling x2apic
    [ 0.022532] Enabled x2apic
    [ 0.022541] Switched APIC routing to cluster x2apic.
    [ 0.022958] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
    [ 0.056020] smpboot: CPU0: Intel(R) Core(TM) i7-4710HQ CPU @ 2.50GHz (fam: 06, model: 3c, stepping: 03)
    [ 0.056031] TSC deadline timer enabled
    [ 0.056047] Performance Events: PEBS fmt2+, 16-deep LBR, Haswell events, full-width counters, Intel PMU driver.
    [ 0.056060] ... version: 3
    [ 0.056061] ... bit width: 48
    [ 0.056061] ... generic registers: 4
    [ 0.056062] ... value mask: 0000ffffffffffff
    [ 0.056063] ... max period: 0000ffffffffffff
    [ 0.056063] ... fixed-purpose events: 3
    [ 0.056064] ... event mask: 000000070000000f
    [ 0.079493] x86: Booting SMP configuration:
    [ 0.079494] .... node #0, CPUs: #1
    [ 0.093398] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
    [ 0.100083] #2 #3 #4 #5 #6 #7
    [ 0.220438] x86: Booted up 1 node, 8 CPUs
    [ 0.220442] smpboot: Total of 8 processors activated (39925.00 BogoMIPS)
    [ 0.226421] devtmpfs: initialized
    [ 0.228397] PM: Registering ACPI NVS region [mem 0xba005000-0xba00bfff] (28672 bytes)
    [ 0.228398] PM: Registering ACPI NVS region [mem 0xcb46f000-0xcb9ddfff] (5697536 bytes)
    [ 0.228983] pinctrl core: initialized pinctrl subsystem
    [ 0.229021] RTC time: 0:23:19, date: 08/15/14
    [ 0.229056] NET: Registered protocol family 16
    [ 0.229128] cpuidle: using governor ladder
    [ 0.229129] cpuidle: using governor menu
    [ 0.229147] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
    [ 0.229148] ACPI: bus type PCI registered
    [ 0.229150] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
    [ 0.229202] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf8000000-0xfbffffff] (base 0xf8000000)
    [ 0.229203] PCI: MMCONFIG at [mem 0xf8000000-0xfbffffff] reserved in E820
    [ 0.229261] PCI: Using configuration type 1 for base access
    [ 0.243279] ACPI: Added _OSI(Module Device)
    [ 0.243281] ACPI: Added _OSI(Processor Device)
    [ 0.243282] ACPI: Added _OSI(3.0 _SCP Extensions)
    [ 0.243283] ACPI: Added _OSI(Processor Aggregator Device)
    [ 0.245353] ACPI Error: No handler for Region [EC__] (ffff88041f03bc18) [EmbeddedControl] (20140424/evregion-162)
    [ 0.245356] ACPI Error: Region EmbeddedControl (ID=3) has no handler (20140424/exfldio-299)
    [ 0.245358] ACPI Error: Method parse/execution failed [\_SB_.PCI0.LPCB.EC__._REG] (Node ffff88041f03ecf8), AE_NOT_EXIST (20140424/psparse-536)
    [ 0.246040] ACPI: Executed 2 blocks of module-level executable AML code
    [ 0.286406] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
    [ 0.299829] ACPI: Dynamic OEM Table Load:
    [ 0.299835] ACPI: SSDT 0xFFFF880418CB3000 0003EA (v01 PmRef Cpu0Cst 00003001 INTL 20120711)
    [ 0.313292] ACPI: Dynamic OEM Table Load:
    [ 0.313298] ACPI: SSDT 0xFFFF880418D31000 0005AA (v01 PmRef ApIst 00003000 INTL 20120711)
    [ 0.326537] ACPI: Dynamic OEM Table Load:
    [ 0.326541] ACPI: SSDT 0xFFFF880418D01A00 000119 (v01 PmRef ApCst 00003000 INTL 20120711)
    [ 0.354461] ACPI: Interpreter enabled
    [ 0.354467] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20140424/hwxface-580)
    [ 0.354471] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20140424/hwxface-580)
    [ 0.354482] ACPI: (supports S0 S3 S4 S5)
    [ 0.354483] ACPI: Using IOAPIC for interrupt routing
    [ 0.354500] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
    [ 0.371125] ACPI: Power Resource [PG00] (on)
    [ 0.385654] ACPI: Power Resource [FN00] (off)
    [ 0.385699] ACPI: Power Resource [FN01] (off)
    [ 0.385742] ACPI: Power Resource [FN02] (off)
    [ 0.385786] ACPI: Power Resource [FN03] (off)
    [ 0.385831] ACPI: Power Resource [FN04] (off)
    [ 0.386362] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
    [ 0.386366] acpi PNP0A08:00: _OSC: OS supports [ExtendedConfig ASPM ClockPM Segments MSI]
    [ 0.386519] acpi PNP0A08:00: _OSC: platform does not support [PCIeHotplug PME]
    [ 0.386601] acpi PNP0A08:00: _OSC: OS now controls [AER PCIeCapability]
    [ 0.386931] PCI host bridge to bus 0000:00
    [ 0.386933] pci_bus 0000:00: root bus resource [bus 00-3e]
    [ 0.386935] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
    [ 0.386936] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
    [ 0.386937] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
    [ 0.386938] pci_bus 0000:00: root bus resource [mem 0x000d0000-0x000d3fff]
    [ 0.386939] pci_bus 0000:00: root bus resource [mem 0x000d4000-0x000d7fff]
    [ 0.386940] pci_bus 0000:00: root bus resource [mem 0x000d8000-0x000dbfff]
    [ 0.386940] pci_bus 0000:00: root bus resource [mem 0x000dc000-0x000dffff]
    [ 0.386941] pci_bus 0000:00: root bus resource [mem 0x000e0000-0x000e3fff]
    [ 0.386942] pci_bus 0000:00: root bus resource [mem 0x000e4000-0x000e7fff]
    [ 0.386943] pci_bus 0000:00: root bus resource [mem 0xcf200000-0xfeafffff]
    [ 0.386948] pci 0000:00:00.0: [8086:0c04] type 00 class 0x060000
    [ 0.387008] pci 0000:00:01.0: [8086:0c01] type 01 class 0x060400
    [ 0.387033] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
    [ 0.387061] pci 0000:00:01.0: System wakeup disabled by ACPI
    [ 0.387093] pci 0000:00:02.0: [8086:0416] type 00 class 0x030000
    [ 0.387101] pci 0000:00:02.0: reg 0x10: [mem 0xf6400000-0xf67fffff 64bit]
    [ 0.387105] pci 0000:00:02.0: reg 0x18: [mem 0xd0000000-0xdfffffff 64bit pref]
    [ 0.387108] pci 0000:00:02.0: reg 0x20: [io 0xf000-0xf03f]
    [ 0.387156] pci 0000:00:03.0: [8086:0c0c] type 00 class 0x040300
    [ 0.387162] pci 0000:00:03.0: reg 0x10: [mem 0xf7414000-0xf7417fff 64bit]
    [ 0.387235] pci 0000:00:14.0: [8086:8c31] type 00 class 0x0c0330
    [ 0.387251] pci 0000:00:14.0: reg 0x10: [mem 0xf7400000-0xf740ffff 64bit]
    [ 0.387303] pci 0000:00:14.0: PME# supported from D3hot D3cold
    [ 0.387325] pci 0000:00:14.0: System wakeup disabled by ACPI
    [ 0.387356] pci 0000:00:16.0: [8086:8c3a] type 00 class 0x078000
    [ 0.387373] pci 0000:00:16.0: reg 0x10: [mem 0xf741e000-0xf741e00f 64bit]
    [ 0.387429] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
    [ 0.387490] pci 0000:00:1a.0: [8086:8c2d] type 00 class 0x0c0320
    [ 0.387508] pci 0000:00:1a.0: reg 0x10: [mem 0xf741c000-0xf741c3ff]
    [ 0.387586] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
    [ 0.387623] pci 0000:00:1a.0: System wakeup disabled by ACPI
    [ 0.387656] pci 0000:00:1b.0: [8086:8c20] type 00 class 0x040300
    [ 0.387670] pci 0000:00:1b.0: reg 0x10: [mem 0xf7410000-0xf7413fff 64bit]
    [ 0.387730] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
    [ 0.387754] pci 0000:00:1b.0: System wakeup disabled by ACPI
    [ 0.387784] pci 0000:00:1c.0: [8086:8c10] type 01 class 0x060400
    [ 0.387850] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
    [ 0.387876] pci 0000:00:1c.0: System wakeup disabled by ACPI
    [ 0.387902] pci 0000:00:1c.2: [8086:8c14] type 01 class 0x060400
    [ 0.387968] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
    [ 0.387994] pci 0000:00:1c.2: System wakeup disabled by ACPI
    [ 0.388018] pci 0000:00:1c.3: [8086:8c16] type 01 class 0x060400
    [ 0.388084] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
    [ 0.388110] pci 0000:00:1c.3: System wakeup disabled by ACPI
    [ 0.388133] pci 0000:00:1c.4: [8086:8c18] type 01 class 0x060400
    [ 0.388199] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold
    [ 0.388225] pci 0000:00:1c.4: System wakeup disabled by ACPI
    [ 0.388261] pci 0000:00:1d.0: [8086:8c26] type 00 class 0x0c0320
    [ 0.388279] pci 0000:00:1d.0: reg 0x10: [mem 0xf741b000-0xf741b3ff]
    [ 0.388358] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
    [ 0.388395] pci 0000:00:1d.0: System wakeup disabled by ACPI
    [ 0.388428] pci 0000:00:1f.0: [8086:8c4b] type 00 class 0x060100
    [ 0.388564] pci 0000:00:1f.2: [8086:8c03] type 00 class 0x010601
    [ 0.388578] pci 0000:00:1f.2: reg 0x10: [io 0xf0b0-0xf0b7]
    [ 0.388584] pci 0000:00:1f.2: reg 0x14: [io 0xf0a0-0xf0a3]
    [ 0.388591] pci 0000:00:1f.2: reg 0x18: [io 0xf090-0xf097]
    [ 0.388597] pci 0000:00:1f.2: reg 0x1c: [io 0xf080-0xf083]
    [ 0.388618] pci 0000:00:1f.2: reg 0x20: [io 0xf060-0xf07f]
    [ 0.388625] pci 0000:00:1f.2: reg 0x24: [mem 0xf741a000-0xf741a7ff]
    [ 0.388658] pci 0000:00:1f.2: PME# supported from D3hot
    [ 0.388708] pci 0000:00:1f.3: [8086:8c22] type 00 class 0x0c0500
    [ 0.388721] pci 0000:00:1f.3: reg 0x10: [mem 0xf7419000-0xf74190ff 64bit]
    [ 0.388739] pci 0000:00:1f.3: reg 0x20: [io 0xf040-0xf05f]
    [ 0.388833] pci 0000:01:00.0: [10de:1199] type 00 class 0x030200
    [ 0.388840] pci 0000:01:00.0: reg 0x10: [mem 0xf5000000-0xf5ffffff]
    [ 0.388847] pci 0000:01:00.0: reg 0x14: [mem 0xe0000000-0xefffffff 64bit pref]
    [ 0.388854] pci 0000:01:00.0: reg 0x1c: [mem 0xf0000000-0xf1ffffff 64bit pref]
    [ 0.388858] pci 0000:01:00.0: reg 0x24: [io 0xe000-0xe07f]
    [ 0.388863] pci 0000:01:00.0: reg 0x30: [mem 0xf6000000-0xf607ffff pref]
    [ 0.388900] pci 0000:01:00.0: System wakeup disabled by ACPI
    [ 0.393257] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.393259] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.393261] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
    [ 0.393264] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.393341] acpiphp: Slot [1] registered
    [ 0.393351] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.393425] acpiphp: Slot [1-1] registered
    [ 0.393435] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.393439] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.393443] pci 0000:00:1c.2: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.393448] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.393716] pci 0000:04:00.0: [1969:e091] type 00 class 0x020000
    [ 0.394035] pci 0000:04:00.0: reg 0x10: [mem 0xf7300000-0xf733ffff 64bit]
    [ 0.394138] pci 0000:04:00.0: reg 0x18: [io 0xc000-0xc07f]
    [ 0.395629] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
    [ 0.395860] pci 0000:04:00.0: System wakeup disabled by ACPI
    [ 0.400012] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.400015] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
    [ 0.400019] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
    [ 0.400137] pci 0000:05:00.0: [8086:08b1] type 00 class 0x028000
    [ 0.400192] pci 0000:05:00.0: reg 0x10: [mem 0xf7200000-0xf7201fff 64bit]
    [ 0.400431] pci 0000:05:00.0: PME# supported from D0 D3hot D3cold
    [ 0.400485] pci 0000:05:00.0: System wakeup disabled by ACPI
    [ 0.406642] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.406647] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
    [ 0.406725] acpi PNP0A08:00: Disabling ASPM (FADT indicates it is unsupported)
    [ 0.414012] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 10 *11 12 14 15)
    [ 0.414043] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414073] ACPI: PCI Interrupt Link [LNKC] (IRQs *3 4 5 6 10 11 12 14 15)
    [ 0.414102] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 *10 11 12 14 15)
    [ 0.414131] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414160] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 10 11 12 14 15) *0, disabled.
    [ 0.414189] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 *5 6 10 11 12 14 15)
    [ 0.414217] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 5 6 10 11 12 14 15)
    [ 0.414398] ACPI: Enabled 6 GPEs in block 00 to 3F
    [ 0.414425] ACPI : EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
    [ 0.414488] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
    [ 0.414490] vgaarb: loaded
    [ 0.414491] vgaarb: bridge control possible 0000:00:02.0
    [ 0.414510] PCI: Using ACPI for IRQ routing
    [ 0.415717] PCI: pci_cache_line_size set to 64 bytes
    [ 0.415760] e820: reserve RAM buffer [mem 0x0009d800-0x0009ffff]
    [ 0.415762] e820: reserve RAM buffer [mem 0xba005000-0xbbffffff]
    [ 0.415763] e820: reserve RAM buffer [mem 0xba7ac000-0xbbffffff]
    [ 0.415764] e820: reserve RAM buffer [mem 0xcb3ca000-0xcbffffff]
    [ 0.415765] e820: reserve RAM buffer [mem 0x42fe00000-0x42fffffff]
    [ 0.415845] NetLabel: Initializing
    [ 0.415846] NetLabel: domain hash size = 128
    [ 0.415847] NetLabel: protocols = UNLABELED CIPSOv4
    [ 0.415856] NetLabel: unlabeled traffic allowed by default
    [ 0.415875] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
    [ 0.415879] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
    [ 0.417907] Switched to clocksource hpet
    [ 0.421100] pnp: PnP ACPI init
    [ 0.421109] ACPI: bus type PNP registered
    [ 0.421154] system 00:00: [mem 0xfed40000-0xfed44fff] has been reserved
    [ 0.421156] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
    [ 0.421271] system 00:01: [io 0x0680-0x069f] has been reserved
    [ 0.421272] system 00:01: [io 0xffff] has been reserved
    [ 0.421274] system 00:01: [io 0xffff] has been reserved
    [ 0.421275] system 00:01: [io 0xffff] has been reserved
    [ 0.421276] system 00:01: [io 0x1c00-0x1cfe] has been reserved
    [ 0.421278] system 00:01: [io 0x1d00-0x1dfe] has been reserved
    [ 0.421279] system 00:01: [io 0x1e00-0x1efe] has been reserved
    [ 0.421280] system 00:01: [io 0x1f00-0x1ffe] has been reserved
    [ 0.421281] system 00:01: [io 0x1800-0x18fe] could not be reserved
    [ 0.421283] system 00:01: [io 0x164e-0x164f] has been reserved
    [ 0.421284] system 00:01: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421306] pnp 00:02: Plug and Play ACPI device, IDs PNP0b00 (active)
    [ 0.421336] system 00:03: [io 0x1854-0x1857] has been reserved
    [ 0.421337] system 00:03: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
    [ 0.421368] system 00:04: [io 0x04d0-0x04d1] has been reserved
    [ 0.421370] system 00:04: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.421401] pnp 00:05: Plug and Play ACPI device, IDs ETD0301 PNP0f13 SYN1500 SYN0002 (active)
    [ 0.421425] pnp 00:06: Plug and Play ACPI device, IDs MSI0007 PNP030b (active)
    [ 0.428497] system 00:07: [mem 0xfed1c000-0xfed1ffff] has been reserved
    [ 0.428499] system 00:07: [mem 0xfed10000-0xfed17fff] has been reserved
    [ 0.428500] system 00:07: [mem 0xfed18000-0xfed18fff] has been reserved
    [ 0.428501] system 00:07: [mem 0xfed19000-0xfed19fff] has been reserved
    [ 0.428502] system 00:07: [mem 0xf8000000-0xfbffffff] has been reserved
    [ 0.428503] system 00:07: [mem 0xfed20000-0xfed3ffff] has been reserved
    [ 0.428504] system 00:07: [mem 0xfed90000-0xfed93fff] could not be reserved
    [ 0.428505] system 00:07: [mem 0xfed45000-0xfed8ffff] has been reserved
    [ 0.428507] system 00:07: [mem 0xff000000-0xffffffff] has been reserved
    [ 0.428508] system 00:07: [mem 0xfee00000-0xfeefffff] could not be reserved
    [ 0.428509] system 00:07: [mem 0xf7fdf000-0xf7fdffff] has been reserved
    [ 0.428510] system 00:07: [mem 0xf7fe0000-0xf7feffff] has been reserved
    [ 0.428512] system 00:07: Plug and Play ACPI device, IDs PNP0c02 (active)
    [ 0.428661] pnp: PnP ACPI: found 8 devices
    [ 0.428662] ACPI: bus type PNP unregistered
    [ 0.434525] pci 0000:00:1c.0: bridge window [io 0x1000-0x0fff] to [bus 02] add_size 1000
    [ 0.434527] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff 64bit pref] to [bus 02] add_size 200000
    [ 0.434529] pci 0000:00:1c.0: bridge window [mem 0x00100000-0x000fffff] to [bus 02] add_size 200000
    [ 0.434547] pci 0000:00:1c.0: res[14]=[mem 0x00100000-0x000fffff] get_res_add_size add_size 200000
    [ 0.434548] pci 0000:00:1c.0: res[15]=[mem 0x00100000-0x000fffff 64bit pref] get_res_add_size add_size 200000
    [ 0.434549] pci 0000:00:1c.0: res[13]=[io 0x1000-0x0fff] get_res_add_size add_size 1000
    [ 0.434553] pci 0000:00:1c.0: BAR 14: assigned [mem 0xcf200000-0xcf3fffff]
    [ 0.434557] pci 0000:00:1c.0: BAR 15: assigned [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434559] pci 0000:00:1c.0: BAR 13: assigned [io 0x2000-0x2fff]
    [ 0.434560] pci 0000:00:01.0: PCI bridge to [bus 01]
    [ 0.434562] pci 0000:00:01.0: bridge window [io 0xe000-0xefff]
    [ 0.434564] pci 0000:00:01.0: bridge window [mem 0xf5000000-0xf60fffff]
    [ 0.434566] pci 0000:00:01.0: bridge window [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.434568] pci 0000:00:1c.0: PCI bridge to [bus 02]
    [ 0.434571] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
    [ 0.434574] pci 0000:00:1c.0: bridge window [mem 0xcf200000-0xcf3fffff]
    [ 0.434578] pci 0000:00:1c.0: bridge window [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434583] pci 0000:00:1c.2: PCI bridge to [bus 03]
    [ 0.434585] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff]
    [ 0.434594] pci 0000:00:1c.2: bridge window [mem 0xf6800000-0xf71fffff]
    [ 0.434597] pci 0000:00:1c.2: bridge window [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.434602] pci 0000:00:1c.3: PCI bridge to [bus 04]
    [ 0.434604] pci 0000:00:1c.3: bridge window [io 0xc000-0xcfff]
    [ 0.434608] pci 0000:00:1c.3: bridge window [mem 0xf7300000-0xf73fffff]
    [ 0.434614] pci 0000:00:1c.4: PCI bridge to [bus 05]
    [ 0.434619] pci 0000:00:1c.4: bridge window [mem 0xf7200000-0xf72fffff]
    [ 0.434625] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
    [ 0.434627] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
    [ 0.434628] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
    [ 0.434628] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000d3fff]
    [ 0.434629] pci_bus 0000:00: resource 8 [mem 0x000d4000-0x000d7fff]
    [ 0.434630] pci_bus 0000:00: resource 9 [mem 0x000d8000-0x000dbfff]
    [ 0.434631] pci_bus 0000:00: resource 10 [mem 0x000dc000-0x000dffff]
    [ 0.434632] pci_bus 0000:00: resource 11 [mem 0x000e0000-0x000e3fff]
    [ 0.434633] pci_bus 0000:00: resource 12 [mem 0x000e4000-0x000e7fff]
    [ 0.434634] pci_bus 0000:00: resource 13 [mem 0xcf200000-0xfeafffff]
    [ 0.434635] pci_bus 0000:01: resource 0 [io 0xe000-0xefff]
    [ 0.434636] pci_bus 0000:01: resource 1 [mem 0xf5000000-0xf60fffff]
    [ 0.434637] pci_bus 0000:01: resource 2 [mem 0xe0000000-0xf1ffffff 64bit pref]
    [ 0.434638] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
    [ 0.434639] pci_bus 0000:02: resource 1 [mem 0xcf200000-0xcf3fffff]
    [ 0.434640] pci_bus 0000:02: resource 2 [mem 0xcf400000-0xcf5fffff 64bit pref]
    [ 0.434641] pci_bus 0000:03: resource 0 [io 0xd000-0xdfff]
    [ 0.434642] pci_bus 0000:03: resource 1 [mem 0xf6800000-0xf71fffff]
    [ 0.434643] pci_bus 0000:03: resource 2 [mem 0xf2100000-0xf2afffff 64bit pref]
    [ 0.434644] pci_bus 0000:04: resource 0 [io 0xc000-0xcfff]
    [ 0.434645] pci_bus 0000:04: resource 1 [mem 0xf7300000-0xf73fffff]
    [ 0.434646] pci_bus 0000:05: resource 1 [mem 0xf7200000-0xf72fffff]
    [ 0.434665] NET: Registered protocol family 2
    [ 0.434817] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
    [ 0.434957] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
    [ 0.435058] TCP: Hash tables configured (established 131072 bind 65536)
    [ 0.435070] TCP: reno registered
    [ 0.435083] UDP hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.435119] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes)
    [ 0.435175] NET: Registered protocol family 1
    [ 0.435185] pci 0000:00:02.0: Boot video device
    [ 0.468054] pci 0000:04:00.0: set MSI_INTX_DISABLE_BUG flag
    [ 0.468062] PCI: CLS 64 bytes, default 64
    [ 0.468102] Unpacking initramfs...
    [ 0.532072] Freeing initrd memory: 5612K (ffff8800374fa000 - ffff880037a75000)
    [ 0.532091] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
    [ 0.532093] software IO TLB [mem 0xc73ca000-0xcb3ca000] (64MB) mapped at [ffff8800c73ca000-ffff8800cb3c9fff]
    [ 0.532304] RAPL PMU detected, hw unit 2^-14 Joules, API unit is 2^-32 Joules, 4 fixed counters 655360 ms ovfl timer
    [ 0.532341] Scanning for low memory corruption every 60 seconds
    [ 0.532551] futex hash table entries: 2048 (order: 5, 131072 bytes)
    [ 0.532785] HugeTLB registered 2 MB page size, pre-allocated 0 pages
    [ 0.533736] zbud: loaded
    [ 0.533873] VFS: Disk quotas dquot_6.5.2
    [ 0.533900] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
    [ 0.533989] msgmni has been set to 31940
    [ 0.534033] Key type big_key registered
    [ 0.534168] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
    [ 0.534218] io scheduler noop registered
    [ 0.534220] io scheduler deadline registered
    [ 0.534251] io scheduler cfq registered (default)
    [ 0.534366] pcieport 0000:00:01.0: irq 42 for MSI/MSI-X
    [ 0.534677] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
    [ 0.534686] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
    [ 0.534714] vesafb: mode is 2880x1620x32, linelength=11520, pages=0
    [ 0.534715] vesafb: scrolling: redraw
    [ 0.534716] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    [ 0.534738] vesafb: framebuffer at 0xd0000000, mapped to 0xffffc90005c00000, using 18240k, total 18240k
    [ 0.822629] Console: switching to colour frame buffer device 360x101
    [ 1.110079] fb0: VESA VGA frame buffer device
    [ 1.110094] intel_idle: MWAIT substates: 0x42120
    [ 1.110095] intel_idle: v0.4 model 0x3C
    [ 1.110096] intel_idle: lapic_timer_reliable_states 0xffffffff
    [ 1.110313] GHES: HEST is not enabled!
    [ 1.110361] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 1.110652] Linux agpgart interface v0.103
    [ 1.110693] rtc_cmos 00:02: RTC can wake from S4
    [ 1.110794] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
    [ 1.110819] rtc_cmos 00:02: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
    [ 1.110828] Intel P-state driver initializing.
    [ 1.110838] Intel pstate controlling: cpu 0
    [ 1.110854] Intel pstate controlling: cpu 1
    [ 1.110867] Intel pstate controlling: cpu 2
    [ 1.110879] Intel pstate controlling: cpu 3
    [ 1.110891] Intel pstate controlling: cpu 4
    [ 1.110899] Intel pstate controlling: cpu 5
    [ 1.110911] Intel pstate controlling: cpu 6
    [ 1.110923] Intel pstate controlling: cpu 7
    [ 1.111000] ledtrig-cpu: registered to indicate activity on CPUs
    [ 1.111276] TCP: cubic registered
    [ 1.111504] NET: Registered protocol family 10
    [ 1.111971] NET: Registered protocol family 17
    [ 1.112783] registered taskstats version 1
    [ 1.114136] Magic number: 10:956:354
    [ 1.114303] rtc_cmos 00:02: setting system clock to 2014-08-15 00:23:19 UTC (1408062199)
    [ 1.114490] PM: Checking hibernation image partition /dev/mapper/lvm-swapvol
    [ 1.114497] PM: Hibernation image not present or could not be loaded.
    [ 1.116376] Freeing unused kernel memory: 1128K (ffffffff818df000 - ffffffff819f9000)
    [ 1.116380] Write protecting the kernel read-only data: 8192k
    [ 1.121213] Freeing unused kernel memory: 800K (ffff880001538000 - ffff880001600000)
    [ 1.123178] Freeing unused kernel memory: 360K (ffff8800017a6000 - ffff880001800000)
    [ 1.135874] random: systemd-tmpfile urandom read with 4 bits of entropy available
    [ 1.136933] systemd-udevd[80]: starting version 215
    [ 1.139538] device-mapper: uevent: version 1.0.3
    [ 1.139594] device-mapper: ioctl: 4.27.0-ioctl (2013-10-30) initialised: [email protected]
    [ 1.149753] i8042: PNP: PS/2 Controller [PNP030b:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
    [ 1.156378] ACPI: bus type USB registered
    [ 1.156404] usbcore: registered new interface driver usbfs
    [ 1.156415] usbcore: registered new interface driver hub
    [ 1.156476] usbcore: registered new device driver usb
    [ 1.156933] SCSI subsystem initialized
    [ 1.162079] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
    [ 1.162996] serio: i8042 KBD port at 0x60,0x64 irq 1
    [ 1.163041] serio: i8042 AUX port at 0x60,0x64 irq 12
    [ 1.163214] ehci-pci: EHCI PCI platform driver
    [ 1.163316] ehci-pci 0000:00:1a.0: EHCI Host Controller
    [ 1.163320] ehci-pci 0000:00:1a.0: new USB bus registered, assigned bus number 1
    [ 1.163332] ehci-pci 0000:00:1a.0: debug port 2
    [ 1.164275] libata version 3.00 loaded.
    [ 1.164967] AVX2 version of gcm_enc/dec engaged.
    [ 1.167248] ehci-pci 0000:00:1a.0: cache line size of 64 is not supported
    [ 1.167266] ehci-pci 0000:00:1a.0: irq 16, io mem 0xf741c000
    [ 1.175425] ehci-pci 0000:00:1a.0: USB 2.0 started, EHCI 1.00
    [ 1.175578] hub 1-0:1.0: USB hub found
    [ 1.175582] hub 1-0:1.0: 2 ports detected
    [ 1.175779] ehci-pci 0000:00:1d.0: EHCI Host Controller
    [ 1.175783] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 2
    [ 1.175793] ehci-pci 0000:00:1d.0: debug port 2
    [ 1.179710] ehci-pci 0000:00:1d.0: cache line size of 64 is not supported
    [ 1.179723] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf741b000
    [ 1.179857] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
    [ 1.188804] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
    [ 1.188987] hub 2-0:1.0: USB hub found
    [ 1.188991] hub 2-0:1.0: 2 ports detected
    [ 1.189214] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.189222] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
    [ 1.189323] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
    [ 1.189343] xhci_hcd 0000:00:14.0: irq 43 for MSI/MSI-X
    [ 1.189561] hub 3-0:1.0: USB hub found
    [ 1.189580] hub 3-0:1.0: 14 ports detected
    [ 1.192223] xhci_hcd 0000:00:14.0: xHCI Host Controller
    [ 1.192226] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
    [ 1.192336] hub 4-0:1.0: USB hub found
    [ 1.192347] hub 4-0:1.0: 6 ports detected
    [ 1.193001] usb: failed to peer usb4-port6 and usb3-port4 by location (usb4-port6:none) (usb3-port4:usb4-port4)
    [ 1.193002] usb usb4-port6: failed to peer to usb3-port4 (-16)
    [ 1.193002] usb: port power management may be unreliable
    [ 1.193071] ahci 0000:00:1f.2: version 3.0
    [ 1.193201] ahci 0000:00:1f.2: irq 44 for MSI/MSI-X
    [ 1.193239] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x10 impl SATA mode
    [ 1.193241] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part ems apst
    [ 1.193733] scsi0 : ahci
    [ 1.193850] scsi1 : ahci
    [ 1.193946] scsi2 : ahci
    [ 1.194041] scsi3 : ahci
    [ 1.194109] scsi4 : ahci
    [ 1.194177] scsi5 : ahci
    [ 1.194201] ata1: DUMMY
    [ 1.194201] ata2: DUMMY
    [ 1.194202] ata3: DUMMY
    [ 1.194203] ata4: DUMMY
    [ 1.194205] ata5: SATA max UDMA/133 abar m2048@0xf741a000 port 0xf741a300 irq 44
    [ 1.194206] ata6: DUMMY
    [ 1.482494] usb 1-1: new high-speed USB device number 2 using ehci-pci
    [ 1.512521] ata5: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
    [ 1.513764] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.513768] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.513770] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.514950] ata5.00: ATA-8: HGST HTS721010A9E630, JB0OA3J0, max UDMA/133
    [ 1.514953] ata5.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
    [ 1.516323] ata5.00: ACPI cmd ef/10:06:00:00:00:00 (SET FEATURES) succeeded
    [ 1.516327] ata5.00: ACPI cmd f5/00:00:00:00:00:00 (SECURITY FREEZE LOCK) filtered out
    [ 1.516329] ata5.00: ACPI cmd b1/c1:00:00:00:00:00 (DEVICE CONFIGURATION OVERLAY) filtered out
    [ 1.517496] ata5.00: configured for UDMA/133
    [ 1.517668] scsi 4:0:0:0: Direct-Access ATA HGST HTS721010A9 A3J0 PQ: 0 ANSI: 5
    [ 1.520380] sd 4:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
    [ 1.520382] sd 4:0:0:0: [sda] 4096-byte physical blocks
    [ 1.520463] sd 4:0:0:0: [sda] Write Protect is off
    [ 1.520466] sd 4:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.520499] sd 4:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.535828] tsc: Refined TSC clocksource calibration: 2494.224 MHz
    [ 1.594508] sda: sda1 sda2 sda3 sda128
    [ 1.595313] sd 4:0:0:0: [sda] Attached SCSI disk
    [ 1.606608] hub 1-1:1.0: USB hub found
    [ 1.606671] hub 1-1:1.0: 6 ports detected
    [ 1.712720] usb 2-1: new high-speed USB device number 2 using ehci-pci
    [ 1.836976] hub 2-1:1.0: USB hub found
    [ 1.837108] hub 2-1:1.0: 8 ports detected
    [ 1.996416] usb 3-5: new low-speed USB device number 2 using xhci_hcd
    [ 2.173583] usb 3-5: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
    [ 2.175034] hidraw: raw HID events driver (C) Jiri Kosina
    [ 2.176842] usbcore: registered new interface driver usbhid
    [ 2.176844] usbhid: USB HID core driver
    [ 2.177298] input: Mouse USB Laser Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-5/3-5:1.0/0003:FFC0:0040.0001/input/input2
    [ 2.177340] hid-generic 0003:FFC0:0040.0001: input,hidraw0: USB HID v1.11 Mouse [Mouse USB Laser Mouse] on usb-0000:00:14.0-5/input0
    [ 2.239993] usb 1-1.3: new full-speed USB device number 3 using ehci-pci
    [ 2.403591] usb 2-1.8: new full-speed USB device number 3 using ehci-pci
    [ 2.491845] hid-generic 0003:1770:FF00.0002: hiddev0,hidraw1: USB HID v1.10 Device [MSI EPF USB MSI EPF USB] on usb-0000:00:1d.0-1.8/input0
    [ 2.537099] Switched to clocksource tsc
    [ 9.125249] random: nonblocking pool is initialized
    [ 15.501907] NET: Registered protocol family 38
    [ 17.087530] EXT4-fs (dm-1): mounted filesystem with ordered data mode. Opts: (null)
    [ 18.229927] EXT4-fs (dm-1): re-mounted. Opts: data=ordered
    [ 18.534354] systemd-udevd[279]: starting version 215
    [ 18.952256] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:00/PNP0C09:00/PNP0C0D:00/input/input3
    [ 18.952469] ACPI: Fan [FAN0] (off)
    [ 18.952491] ACPI: Fan [FAN1] (off)
    [ 18.952509] ACPI: Fan [FAN2] (off)
    [ 18.952526] ACPI: Fan [FAN3] (off)
    [ 18.952543] ACPI: Fan [FAN4] (off)
    [ 18.955614] ACPI: Lid Switch [LID0]
    [ 18.955655] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input4
    [ 18.955658] ACPI: Power Button [PWRB]
    [ 18.955686] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input5
    [ 18.955687] ACPI: Power Button [PWRF]
    [ 18.966606] wmi: Mapper loaded
    [ 19.047576] thermal LNXTHERM:00: registered as thermal_zone0
    [ 19.047578] ACPI: Thermal Zone [TZ00] (28 C)
    [ 19.047729] thermal LNXTHERM:01: registered as thermal_zone1
    [ 19.047730] ACPI: Thermal Zone [TZ01] (30 C)
    [ 19.050742] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
    [ 19.068816] thermal LNXTHERM:02: registered as thermal_zone2
    [ 19.068818] ACPI: Thermal Zone [THRM] (53 C)
    [ 19.071927] ACPI Warning: SystemIO range 0x000000000000f040-0x000000000000f05f conflicts with OpRegion 0x000000000000f040-0x000000000000f04f (\_SB_.PCI0.SBUS.SMBI) (20140424/utaddress-258)
    [ 19.071931] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 19.124018] [drm] Initialized drm 1.1.0 20060810
    [ 19.155967] input: PC Speaker as /devices/platform/pcspkr/input/input6
    [ 19.191918] ACPI: Battery Slot [BAT1] (battery present)
    [ 19.198641] ACPI: AC Adapter [ADP1] (on-line)
    [ 19.201166] mei_me 0000:00:16.0: irq 45 for MSI/MSI-X
    [ 19.230883] microcode: CPU0 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.320790] mousedev: PS/2 mouse device common for all mice
    [ 19.340987] input: MSI WMI hotkeys as /devices/virtual/input/input8
    [ 19.350216] iTCO_vendor_support: vendor-support=0
    [ 19.357069] [drm] Memory usable by graphics device = 2048M
    [ 19.357071] [drm] Replacing VGA console driver
    [ 19.357073] checking generic (d0000000 11d0000) vs hw (d0000000 10000000)
    [ 19.357074] fb: switching to inteldrmfb from VESA VGA
    [ 19.357086] Console: switching to colour dummy device 80x25
    [ 19.360084] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.11
    [ 19.360106] iTCO_wdt: Found a Lynx Point TCO device (Version=2, TCOBASE=0x1860)
    [ 19.360171] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
    [ 19.375453] i915 0000:00:02.0: irq 46 for MSI/MSI-X
    [ 19.375461] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 19.375462] [drm] Driver supports precise vblank timestamp query.
    [ 19.375480] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
    [ 19.396788] [drm] VBT doesn't support DRRS
    [ 19.413293] alx 0000:04:00.0 eth0: Qualcomm Atheros AR816x/AR817x Ethernet [44:8a:5b:6f:c3:57]
    [ 19.434956] cfg80211: Calling CRDA to update world regulatory domain
    [ 19.465506] microcode: CPU1 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465534] microcode: CPU2 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465555] microcode: CPU3 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465575] microcode: CPU4 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465588] microcode: CPU5 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465603] microcode: CPU6 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465625] microcode: CPU7 sig=0x306c3, pf=0x20, revision=0x17
    [ 19.465673] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
    [ 19.518669] Bluetooth: Core ver 2.19
    [ 19.518681] NET: Registered protocol family 31
    [ 19.518682] Bluetooth: HCI device and connection manager initialized
    [ 19.518688] Bluetooth: HCI socket layer initialized
    [ 19.518689] Bluetooth: L2CAP socket layer initialized
    [ 19.545919] Bluetooth: SCO socket layer initialized
    [ 19.545920] systemd-udevd[296]: renamed network interface eth0 to enp4s0
    [ 19.555627] [drm] GMBUS [i915 gmbus vga] timed out, falling back to bit banging on pin 2
    [ 19.579086] fbcon: inteldrmfb (fb0) is primary device
    [ 19.634446] usbcore: registered new interface driver btusb
    [ 19.647874] Bluetooth: hci0: read Intel version: 370710018002030d00
    [ 19.662947] MXM: GUID detected in BIOS
    [ 19.663037] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 19.663093] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 19.663229] pci 0000:01:00.0: optimus capabilities: enabled, status dynamic power, hda bios codec supported
    [ 19.663230] VGA switcheroo: detected Optimus DSM method \_SB_.PCI0.PEG0.PEGP handle
    [ 19.672404] Intel(R) Wireless WiFi driver for Linux, in-tree:
    [ 19.672404] Copyright(c) 2003- 2014 Intel Corporation
    [ 19.672511] iwlwifi 0000:05:00.0: irq 47 for MSI/MSI-X
    [ 19.774284] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
    [ 19.803544] psmouse serio1: elantech: assuming hardware version 4 (with firmware version 0x461f00)
    [ 19.804987] iwlwifi 0000:05:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
    [ 19.820975] psmouse serio1: elantech: Synaptics capabilities query result 0x00, 0x15, 0x0e.
    [ 19.908919] input: ETPS/2 Elantech Touchpad as /devices/platform/i8042/serio1/input/input7
    [ 19.956219] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
    [ 20.011971] iwlwifi 0000:05:00.0: Detected Intel(R) Dual Band Wireless AC 7260, REV=0x144
    [ 20.012015] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 20.012231] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 20.155135] Adding 16777212k swap on /dev/mapper/lvm-swapvol. Priority:-1 extents:1 across:16777212k FS
    [ 20.301346] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
    [ 20.329844] systemd-udevd[285]: renamed network interface wlan0 to wlp5s0
    [ 20.646833] Console: switching to colour frame buffer device 360x101
    [ 20.661807] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
    [ 20.661808] i915 0000:00:02.0: registered panic notifier
    [ 20.684762] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
    [ 20.707714] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
    [ 20.707767] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:44/LNXVIDEO:00/input/input9
    [ 20.708831] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
    [ 20.708889] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:01/input/input10
    [ 20.708952] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
    [ 20.709072] nouveau [ DEVICE][0000:01:00.0] BOOT0 : 0x0e4190a2
    [ 20.709074] nouveau [ DEVICE][0000:01:00.0] Chipset: GK104 (NVE4)
    [ 20.709075] nouveau [ DEVICE][0000:01:00.0] Family : NVE0
    [ 20.709094] nouveau [ VBIOS][0000:01:00.0] checking PRAMIN for image...
    [ 20.709100] nouveau [ VBIOS][0000:01:00.0] ... signature not found
    [ 20.709101] nouveau [ VBIOS][0000:01:00.0] checking PROM for image...
    [ 20.709410] snd_hda_intel 0000:00:03.0: irq 48 for MSI/MSI-X
    [ 20.709527] snd_hda_intel 0000:00:1b.0: irq 49 for MSI/MSI-X
    [ 20.778578] nouveau [ VBIOS][0000:01:00.0] ... appears to be valid
    [ 20.778580] nouveau [ VBIOS][0000:01:00.0] using image from PROM
    [ 20.778686] nouveau [ VBIOS][0000:01:00.0] BIT signature found
    [ 20.778688] nouveau [ VBIOS][0000:01:00.0] version 80.04.ef.00.21
    [ 20.778987] nouveau [ DEVINIT][0000:01:00.0] adaptor not initialised
    [ 20.778994] nouveau [ VBIOS][0000:01:00.0] running init tables
    [ 20.968712] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input11
    [ 20.968772] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input12
    [ 20.968830] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input13
    [ 21.009002] sound hdaudioC1D0: autoconfig: line_outs=2 (0x15/0x1b/0x0/0x0/0x0) type:speaker
    [ 21.009005] sound hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 21.009006] sound hdaudioC1D0: hp_outs=1 (0x14/0x0/0x0/0x0/0x0)
    [ 21.009007] sound hdaudioC1D0: mono: mono_out=0x0
    [ 21.009008] sound hdaudioC1D0: dig-out=0x1e/0x0
    [ 21.009009] sound hdaudioC1D0: inputs:
    [ 21.009010] sound hdaudioC1D0: Mic=0x18
    [ 21.009011] sound hdaudioC1D0: Internal Mic=0x12
    [ 21.016614] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/hdaudioC1D0/input14
    [ 21.016783] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input15
    [ 21.016842] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input16
    [ 21.043492] nouveau 0000:01:00.0: irq 50 for MSI/MSI-X
    [ 21.043506] nouveau [ PMC][0000:01:00.0] MSI interrupts enabled
    [ 21.043546] nouveau [ PFB][0000:01:00.0] RAM type: GDDR5
    [ 21.043547] nouveau [ PFB][0000:01:00.0] RAM size: 3072 MiB
    [ 21.043548] nouveau [ PFB][0000:01:00.0] ZCOMP: 0 tags
    [ 21.045953] nouveau [ VOLT][0000:01:00.0] GPU voltage: 600000uv
    [ 21.074609] nouveau [ PTHERM][0000:01:00.0] FAN control: none / external
    [ 21.074615] nouveau [ PTHERM][0000:01:00.0] fan management: automatic
    [ 21.074622] nouveau [ PTHERM][0000:01:00.0] internal sensor: yes
    [ 21.074643] nouveau [ CLK][0000:01:00.0] 07: core 324-405 MHz memory 648 MHz
    [ 21.074686] nouveau [ CLK][0000:01:00.0] 0a: core 405-967 MHz memory 1620 MHz
    [ 21.074757] nouveau [ CLK][0000:01:00.0] 0e: core 405-967 MHz memory 4000 MHz
    [ 21.074843] nouveau [ CLK][0000:01:00.0] 0f: core 405-967 MHz memory 5000 MHz
    [ 21.074913] nouveau [ CLK][0000:01:00.0] --: core 324 MHz memory 648 MHz
    [ 21.113338] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x400700 [ IBUS ]
    [ 21.113368] vga_switcheroo: enabled
    [ 21.113471] [TTM] Zone kernel: Available graphics memory: 8177794 kiB
    [ 21.113473] [TTM] Zone dma32: Available graphics memory: 2097152 kiB
    [ 21.113473] [TTM] Initializing pool allocator
    [ 21.113477] [TTM] Initializing DMA pool allocator
    [ 21.113484] nouveau [ DRM] VRAM: 3072 MiB
    [ 21.113485] nouveau [ DRM] GART: 1048576 MiB
    [ 21.113487] nouveau [ DRM] TMDS table version 2.0
    [ 21.113489] nouveau [ DRM] DCB version 4.0
    [ 21.119681] nouveau [ DRM] MM: using COPY for buffer copies
    [ 21.119686] [drm] Initialized nouveau 1.1.1 20120801 for 0000:01:00.0 on minor 1
    [ 21.347781] [drm] Enabling RC6 states: RC6 on, RC6p off, RC6pp off
    [ 21.985072] EXT4-fs (sda1): mounting ext2 file system using the ext4 subsystem
    [ 21.993709] EXT4-fs (sda1): mounted filesystem without journal. Opts: (null)
    [ 26.353187] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 26.353470] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [ 26.353475] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 28.489788] EXT4-fs (dm-3): mounted filesystem with ordered data mode. Opts: data=ordered
    [ 28.566055] systemd-journald[255]: Received request to flush runtime journal from PID 1
    [ 28.853911] systemd-journald[255]: File /var/log/journal/2083dda0e63b4e6cad96cc755ad72173/system.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 30.756848] alx 0000:04:00.0: irq 51 for MSI/MSI-X
    [ 30.757162] IPv6: ADDRCONF(NETDEV_UP): enp4s0: link is not ready
    [ 30.759420] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 30.759647] iwlwifi 0000:05:00.0: L1 Disabled; Enabling L0S
    [ 30.771168] IPv6: ADDRCONF(NETDEV_UP): wlp5s0: link is not ready
    [ 30.780781] nouveau E[ PBUS][0000:01:00.0] MMIO read of 0x00000000 FAULT at 0x400700 [ IBUS ]
    [ 33.277389] nouveau E[ PGRAPH][0000:01:00.0] HUB_INIT timed out
    [ 33.277393] nouveau E[ PGRAPH][0000:01:00.0] 409000 - done 0x00000220
    [ 33.277397] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277401] nouveau E[ PGRAPH][0000:01:00.0] 409000 - stat 0x00000000 0x00000000 0x00000006 0x00000001
    [ 33.277403] nouveau E[ PGRAPH][0000:01:00.0] 502000 - done 0x00000340
    [ 33.277408] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x80000000 0x00006500 0x00000000 0x00000000
    [ 33.277414] nouveau E[ PGRAPH][0000:01:00.0] 502000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
    [ 33.277415] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - done 0x00000340
    [ 33.277421] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x80000000 0x00008e00 0x00000000 0x00000000
    [ 33.277426] nouveau E[ PGRAPH][0000:01:00.0] 50a000 - stat 0x00000000 0x00000000 0x00000002 0x00000000
    [ 33.277428] nouveau E[ PGRAPH][0000:01:00.0] 512000 - done 0x00000300
    [ 33.277433] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00017f00 0x00000000 0x00000000
    [ 33.277439] nouveau E[ PGRAPH][0000:01:00.0] 512000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277441] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - done 0x00000300
    [ 33.277446] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277451] nouveau E[ PGRAPH][0000:01:00.0] 51a000 - stat 0x00000000 0x00000000 0x00000000 0x00000000
    [ 33.277452] nouveau E[ PGRAPH][0000:01:00.0] init failed, -16
    [ 34.226370] cfg80211: Calling CRDA to update world regulatory domain
    [ 36.247358] fuse init (API version 7.23)
    [ 39.340754] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 39.341033] ACPI: \_SB_.PCI0.PEG0.PEGP: failed to evaluate _DSM
    [ 39.341037] ACPI Warning: \_SB_.PCI0.PEG0.PEGP._DSM: Argument #4 type mismatch - Found [Buffer], ACPI requires [Package] (20140424/nsarguments-95)
    [ 53.952829] systemd-journald[255]: File /var/log/journal/2083dda0e63b4e6cad96cc755ad72173/user-1000.journal corrupted or uncleanly shut down, renaming and replacing.
    [ 54.363832] nouveau E[ DRM] failed to idle channel 0xcccc0000 [DRM]
    [ 54.477547] pci_pm_runtime_suspend(): nouveau_pmops_runtime_suspend+0x0/0xe0 [nouveau] returns -16
    [ 60.362546] wlp5s0: authenticate with 94:44:52:dc:db:bf
    [ 60.365767] wlp5s0: send auth to 94:44:52:dc:db:bf (try 1/3)
    [ 60.367581] wlp5s0: authenticated
    [ 60.370498] wlp5s0: associate with 94:44:52:dc:db:bf (try 1/3)
    [ 60.374426] wlp5s0: RX AssocResp from 94:44:52:dc:db:bf (capab=0x411 status=0 aid=3)
    [ 60.375328] wlp5s0: associated
    [ 60.375354] IPv6: ADDRCONF(NETDEV_CHANGE): wlp5s0: link becomes ready
    journalctl -x:
    -- Logs begin at Thu 2014-08-14 21:31:47 CEST, end at Fri 2014-08-15 02:25:40 CEST. --
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Paths.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Paths.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Timers.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Timers.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Sockets.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Sockets.
    -- Subject: Unit UNIT has finished start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has finished starting up.
    -- The start-up result is done.
    Aug 14 21:31:47 riXmsi systemd[579]: Starting Basic System.
    -- Subject: Unit UNIT has begun with start-up
    -- Defined-By: systemd
    -- Support: http://lists.freedesktop.org/mailman/listinfo/systemd-devel
    -- Unit UNIT has begun starting up.
    Aug 14 21:31:47 riXmsi systemd[579]: Reached target Basic System.
    -- Subject: Unit UNIT

    keyboard and mouse are now auto-detected. Do you have xf86-input-evdev installed? If so, you do not need to explicitly set the drivers for keyboard and mouse in xorg.conf. You can try it out if you like.

  • [Solved] Switch from nvidia driver to nouveau - libgl is seg faulting

    Hello,
    I recently tried to switch my desktop from using the proprietary nvidia driver to nouveua after having the proprietary driver crash randomly.
    I followed the wiki page for this (https://wiki.archlinux.org/index.php/nouveau) where I removed the nvidia driver packages and installed xf86-video-nouveau. I also regenerated the ramdisk image. After all of this I was unable to get xfce to load, although I can get X to successfully start running twm.
    The problem seems to be because libGL.so.1 is causing many things segfault. (emacs, xfce4-session). For example, if I run emacs through gdb from the console, the backtrace is from /usr/lib/libGL.so.1.
    Any suggestions on things I can try to stop the seg faulting and get a usable system again?
    Thanks
    Last edited by mikej_96 (2013-12-23 04:13:49)

    I did reboot.
    Here is the Xorg.0.log from a sucessful twm session:
    [ 1948.113]
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 1948.113] X Protocol Version 11, Revision 0
    [ 1948.113] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 1948.113] Current Operating System: Linux Neo 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
    [ 1948.113] Kernel command line: root=/dev/sda1 resume=/dev/sdb3 ro init=/usr/lib/systemd/systemd
    [ 1948.113] Build Date: 13 December 2013 03:11:42PM
    [ 1948.113]
    [ 1948.113] Current version of pixman: 0.32.4
    [ 1948.113] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 1948.113] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 1948.113] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 22 20:09:20 2013
    [ 1948.113] (==) Using config file: "/etc/X11/xorg.conf"
    [ 1948.113] (==) No Layout section. Using the first Screen section.
    [ 1948.113] (==) No screen section available. Using defaults.
    [ 1948.113] (**) |-->Screen "Default Screen Section" (0)
    [ 1948.113] (**) | |-->Monitor "<default monitor>"
    [ 1948.113] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 1948.113] (**) | |-->Device "Device0"
    [ 1948.113] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 1948.113] (**) Option "AutoAddDevices" "False"
    [ 1948.113] (**) Not automatically adding devices
    [ 1948.113] (==) Automatically enabling devices
    [ 1948.113] (==) Automatically adding GPU devices
    [ 1948.113] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 1948.113] Entry deleted from font path.
    [ 1948.113] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 1948.113] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 1948.113] (==) |-->Input Device "Mouse0"
    [ 1948.113] (==) |-->Input Device "Keyboard0"
    [ 1948.113] (==) No Layout section. Using the first mouse device.
    [ 1948.113] (==) No Layout section. Using the first keyboard device.
    [ 1948.113] (II) Loader magic: 0x7fec20
    [ 1948.113] (II) Module ABI versions:
    [ 1948.113] X.Org ANSI C Emulation: 0.4
    [ 1948.113] X.Org Video Driver: 14.1
    [ 1948.113] X.Org XInput driver : 19.1
    [ 1948.113] X.Org Server Extension : 7.0
    [ 1948.114] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 1948.114] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 1948.266] (--) PCI:*(0:1:0:0) 10de:1187:1458:360b rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 1948.266] (--) PCI: (0:2:0:0) 10de:0622:3842:c858 rev 161, Mem @ 0xf4000000/16777216, 0xd0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [ 1948.266] Initializing built-in extension Generic Event Extension
    [ 1948.266] Initializing built-in extension SHAPE
    [ 1948.266] Initializing built-in extension MIT-SHM
    [ 1948.266] Initializing built-in extension XInputExtension
    [ 1948.266] Initializing built-in extension XTEST
    [ 1948.266] Initializing built-in extension BIG-REQUESTS
    [ 1948.266] Initializing built-in extension SYNC
    [ 1948.266] Initializing built-in extension XKEYBOARD
    [ 1948.266] Initializing built-in extension XC-MISC
    [ 1948.266] Initializing built-in extension SECURITY
    [ 1948.266] Initializing built-in extension XINERAMA
    [ 1948.266] Initializing built-in extension XFIXES
    [ 1948.266] Initializing built-in extension RENDER
    [ 1948.266] Initializing built-in extension RANDR
    [ 1948.266] Initializing built-in extension COMPOSITE
    [ 1948.266] Initializing built-in extension DAMAGE
    [ 1948.266] Initializing built-in extension MIT-SCREEN-SAVER
    [ 1948.266] Initializing built-in extension DOUBLE-BUFFER
    [ 1948.266] Initializing built-in extension RECORD
    [ 1948.266] Initializing built-in extension DPMS
    [ 1948.266] Initializing built-in extension X-Resource
    [ 1948.266] Initializing built-in extension XVideo
    [ 1948.266] Initializing built-in extension XVideo-MotionCompensation
    [ 1948.266] Initializing built-in extension XFree86-VidModeExtension
    [ 1948.266] Initializing built-in extension XFree86-DGA
    [ 1948.266] Initializing built-in extension XFree86-DRI
    [ 1948.266] Initializing built-in extension DRI2
    [ 1948.266] (II) LoadModule: "glx"
    [ 1948.266] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 1948.266] (II) Module glx: vendor="X.Org Foundation"
    [ 1948.266] compiled for 1.14.5, module version = 1.0.0
    [ 1948.266] ABI class: X.Org Server Extension, version 7.0
    [ 1948.266] (==) AIGLX enabled
    [ 1948.266] Loading extension GLX
    [ 1948.266] (II) LoadModule: "nouveau"
    [ 1948.266] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 1948.266] (II) Module nouveau: vendor="X.Org Foundation"
    [ 1948.266] compiled for 1.14.4, module version = 1.0.10
    [ 1948.266] Module class: X.Org Video Driver
    [ 1948.266] ABI class: X.Org Video Driver, version 14.1
    [ 1948.266] (II) LoadModule: "mouse"
    [ 1948.266] (II) Loading /usr/lib/xorg/modules/input/mouse_drv.so
    [ 1948.266] (II) Module mouse: vendor="X.Org Foundation"
    [ 1948.266] compiled for 1.14.0, module version = 1.9.0
    [ 1948.266] Module class: X.Org XInput Driver
    [ 1948.266] ABI class: X.Org XInput driver, version 19.1
    [ 1948.266] (II) LoadModule: "kbd"
    [ 1948.266] (II) Loading /usr/lib/xorg/modules/input/kbd_drv.so
    [ 1948.266] (II) Module kbd: vendor="X.Org Foundation"
    [ 1948.266] compiled for 1.14.4, module version = 1.8.0
    [ 1948.266] Module class: X.Org XInput Driver
    [ 1948.266] ABI class: X.Org XInput driver, version 19.1
    [ 1948.266] (II) NOUVEAU driver
    [ 1948.266] (II) NOUVEAU driver for NVIDIA chipset families :
    [ 1948.266] RIVA TNT (NV04)
    [ 1948.266] RIVA TNT2 (NV05)
    [ 1948.266] GeForce 256 (NV10)
    [ 1948.266] GeForce 2 (NV11, NV15)
    [ 1948.266] GeForce 4MX (NV17, NV18)
    [ 1948.266] GeForce 3 (NV20)
    [ 1948.266] GeForce 4Ti (NV25, NV28)
    [ 1948.266] GeForce FX (NV3x)
    [ 1948.266] GeForce 6 (NV4x)
    [ 1948.266] GeForce 7 (G7x)
    [ 1948.266] GeForce 8 (G8x)
    [ 1948.266] GeForce GTX 200 (NVA0)
    [ 1948.266] GeForce GTX 400 (NVC0)
    [ 1948.266] (--) using VT number 4
    [ 1948.268] (II) [drm] nouveau interface version: 1.1.1
    [ 1948.268] (II) [drm] nouveau interface version: 1.1.1
    [ 1948.268] (II) Loading sub module "dri2"
    [ 1948.268] (II) LoadModule: "dri2"
    [ 1948.268] (II) Module "dri2" already built-in
    [ 1948.268] (--) NOUVEAU(0): Chipset: "NVIDIA NVE4"
    [ 1948.268] (II) NOUVEAU(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 1948.268] (==) NOUVEAU(0): Depth 24, (--) framebuffer bpp 32
    [ 1948.268] (==) NOUVEAU(0): RGB weight 888
    [ 1948.268] (==) NOUVEAU(0): Default visual is TrueColor
    [ 1948.268] (==) NOUVEAU(0): Using HW cursor
    [ 1948.268] (==) NOUVEAU(0): GLX sync to VBlank disabled.
    [ 1948.268] (==) NOUVEAU(0): Page flipping enabled
    [ 1948.268] (==) NOUVEAU(0): Swap limit set to 2 [Max allowed 2]
    [ 1948.301] (II) NOUVEAU(0): Output DVI-I-1 has no monitor section
    [ 1948.331] (II) NOUVEAU(0): Output DVI-D-1 has no monitor section
    [ 1948.389] (II) NOUVEAU(0): Output HDMI-1 has no monitor section
    [ 1948.482] (II) NOUVEAU(0): Output DP-1 has no monitor section
    [ 1948.511] (II) NOUVEAU(0): EDID for output DVI-I-1
    [ 1948.511] (II) NOUVEAU(0): Manufacturer: ACR Model: 1fb Serial#: 55586593
    [ 1948.511] (II) NOUVEAU(0): Year: 2010 Week: 35
    [ 1948.511] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1948.511] (II) NOUVEAU(0): Digital Display Input
    [ 1948.511] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 1948.511] (II) NOUVEAU(0): Gamma: 2.20
    [ 1948.511] (II) NOUVEAU(0): DPMS capabilities: Off
    [ 1948.511] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1948.511] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1948.511] (II) NOUVEAU(0): redX: 0.644 redY: 0.336 greenX: 0.301 greenY: 0.611
    [ 1948.511] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
    [ 1948.511] (II) NOUVEAU(0): Supported established timings:
    [ 1948.511] (II) NOUVEAU(0): 720x400@70Hz
    [ 1948.511] (II) NOUVEAU(0): 640x480@60Hz
    [ 1948.511] (II) NOUVEAU(0): 640x480@67Hz
    [ 1948.511] (II) NOUVEAU(0): 800x600@56Hz
    [ 1948.511] (II) NOUVEAU(0): 800x600@60Hz
    [ 1948.511] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1948.511] (II) NOUVEAU(0): 1024x768@70Hz
    [ 1948.511] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1948.511] (II) NOUVEAU(0): Supported standard timings:
    [ 1948.511] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1948.511] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 1948.511] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1948.511] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 1948.511] (II) NOUVEAU(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1948.511] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.511] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 510 x 287 mm
    [ 1948.511] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1948.511] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1948.511] (II) NOUVEAU(0): Ranges: V min: 49 V max: 75 Hz, H min: 30 H max: 94 kHz, PixClock max 175 MHz
    [ 1948.511] (II) NOUVEAU(0): Monitor name: Acer P236H
    [ 1948.511] (II) NOUVEAU(0): Serial No: LQS0W0084321
    [ 1948.511] (II) NOUVEAU(0): EDID (in hex):
    [ 1948.511] (II) NOUVEAU(0): 00ffffffffffff000472fb01212f5003
    [ 1948.512] (II) NOUVEAU(0): 2314010380331d782ac285a4564d9c25
    [ 1948.512] (II) NOUVEAU(0): 125054b30c00714f810081809500d1c0
    [ 1948.512] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1948.512] (II) NOUVEAU(0): 4500fe1f1100001e000000fd00314b1e
    [ 1948.512] (II) NOUVEAU(0): 5e11000a202020202020000000fc0041
    [ 1948.512] (II) NOUVEAU(0): 6365722050323336480a2020000000ff
    [ 1948.512] (II) NOUVEAU(0): 004c51533057303038343332310a004d
    [ 1948.512] (II) NOUVEAU(0): Printing probed modes for output DVI-I-1
    [ 1948.512] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1948.512] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.512] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1948.541] (II) NOUVEAU(0): EDID for output DVI-D-1
    [ 1948.541] (II) NOUVEAU(0): Manufacturer: ACR Model: 1a2 Serial#: 86013623
    [ 1948.541] (II) NOUVEAU(0): Year: 2010 Week: 52
    [ 1948.541] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1948.541] (II) NOUVEAU(0): Digital Display Input
    [ 1948.541] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 1948.541] (II) NOUVEAU(0): Gamma: 2.20
    [ 1948.541] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 1948.541] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1948.541] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1948.541] (II) NOUVEAU(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
    [ 1948.541] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
    [ 1948.541] (II) NOUVEAU(0): Supported established timings:
    [ 1948.541] (II) NOUVEAU(0): 720x400@70Hz
    [ 1948.541] (II) NOUVEAU(0): 640x480@60Hz
    [ 1948.541] (II) NOUVEAU(0): 640x480@67Hz
    [ 1948.541] (II) NOUVEAU(0): 800x600@56Hz
    [ 1948.541] (II) NOUVEAU(0): 800x600@60Hz
    [ 1948.541] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1948.541] (II) NOUVEAU(0): 1024x768@70Hz
    [ 1948.541] (II) NOUVEAU(0): Manufacturer's mask: 10
    [ 1948.541] (II) NOUVEAU(0): Supported standard timings:
    [ 1948.541] (II) NOUVEAU(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1948.541] (II) NOUVEAU(0): #1: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 1948.541] (II) NOUVEAU(0): #2: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1948.541] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 1948.541] (II) NOUVEAU(0): #4: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1948.541] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.541] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 509 x 286 mm
    [ 1948.541] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1948.541] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1948.541] (II) NOUVEAU(0): Monitor name: P236H
    [ 1948.541] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
    [ 1948.541] (II) NOUVEAU(0): Serial No: LNW0C0064022
    [ 1948.541] (II) NOUVEAU(0): EDID (in hex):
    [ 1948.541] (II) NOUVEAU(0): 00ffffffffffff000472a201b7762005
    [ 1948.541] (II) NOUVEAU(0): 3414010380331d78ea6085a6564a9c25
    [ 1948.541] (II) NOUVEAU(0): 125054b30c10714f810081809500d1c0
    [ 1948.541] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1948.541] (II) NOUVEAU(0): 4500fd1e1100001a000000fc00503233
    [ 1948.541] (II) NOUVEAU(0): 36480a20202020202020000000fd0038
    [ 1948.541] (II) NOUVEAU(0): 4c1f5312000a202020202020000000ff
    [ 1948.541] (II) NOUVEAU(0): 004c4e573043303036343032320a0092
    [ 1948.541] (II) NOUVEAU(0): Printing probed modes for output DVI-D-1
    [ 1948.541] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
    [ 1948.541] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1948.541] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 1948.541] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 1948.541] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1948.541] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 1948.542] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1948.542] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1948.542] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 1948.542] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 1948.542] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.542] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1948.599] (II) NOUVEAU(0): EDID for output HDMI-1
    [ 1948.599] (II) NOUVEAU(0): Manufacturer: ACR Model: 9a Serial#: 2433816882
    [ 1948.599] (II) NOUVEAU(0): Year: 2009 Week: 11
    [ 1948.599] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1948.599] (II) NOUVEAU(0): Digital Display Input
    [ 1948.599] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 1948.599] (II) NOUVEAU(0): Gamma: 2.20
    [ 1948.599] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 1948.599] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1948.599] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1948.599] (II) NOUVEAU(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
    [ 1948.599] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
    [ 1948.599] (II) NOUVEAU(0): Supported established timings:
    [ 1948.599] (II) NOUVEAU(0): 720x400@70Hz
    [ 1948.599] (II) NOUVEAU(0): 640x480@60Hz
    [ 1948.599] (II) NOUVEAU(0): 640x480@67Hz
    [ 1948.599] (II) NOUVEAU(0): 800x600@56Hz
    [ 1948.599] (II) NOUVEAU(0): 800x600@60Hz
    [ 1948.599] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1948.599] (II) NOUVEAU(0): 1024x768@70Hz
    [ 1948.599] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1948.599] (II) NOUVEAU(0): Supported standard timings:
    [ 1948.599] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1948.599] (II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1948.599] (II) NOUVEAU(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 1948.599] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 1948.599] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.599] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 510 x 287 mm
    [ 1948.599] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1948.599] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1948.599] (II) NOUVEAU(0): Monitor name: X233H
    [ 1948.599] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
    [ 1948.599] (II) NOUVEAU(0): Serial No: LFM0C0234041
    [ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.599] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 510 x 287 mm
    [ 1948.599] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 1948.599] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.599] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
    [ 1948.599] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 1948.599] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.599] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
    [ 1948.599] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1948.599] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.599] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
    [ 1948.599] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 1948.599] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 1948.599] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.599] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
    [ 1948.599] (II) NOUVEAU(0): h_active: 1920 h_sync: 1972 h_sync_end 2016 h_blank_end 2640 h_border: 0
    [ 1948.599] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 1948.599] (II) NOUVEAU(0): Number of EDID sections to follow: 1
    [ 1948.599] (II) NOUVEAU(0): EDID (in hex):
    [ 1948.599] (II) NOUVEAU(0): 00ffffffffffff0004729a0032191191
    [ 1948.599] (II) NOUVEAU(0): 0b13010380331d78ea6085a6564a9c25
    [ 1948.599] (II) NOUVEAU(0): 125054b30c008180714f81009500a940
    [ 1948.599] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1948.599] (II) NOUVEAU(0): 4500fe1f1100001a000000fc00583233
    [ 1948.599] (II) NOUVEAU(0): 33480a20202020202020000000fd0038
    [ 1948.599] (II) NOUVEAU(0): 4c1f5312000a202020202020000000ff
    [ 1948.599] (II) NOUVEAU(0): 004c464d3043303233343034310a01ec
    [ 1948.599] (II) NOUVEAU(0): 020322f223097f074e01020384050607
    [ 1948.599] (II) NOUVEAU(0): 10111215931f148301000066030c0010
    [ 1948.599] (II) NOUVEAU(0): 00108c0ad08a20e02d10103e9600fe1f
    [ 1948.599] (II) NOUVEAU(0): 11000018011d007251d01e206e285500
    [ 1948.599] (II) NOUVEAU(0): fe1f1100001e011d8018711c1620582c
    [ 1948.599] (II) NOUVEAU(0): 2500fe1f1100009e011d00bc52d01e20
    [ 1948.599] (II) NOUVEAU(0): b8285540fe1f1100001e011d80d0721c
    [ 1948.599] (II) NOUVEAU(0): 1620342c2500fe1f1100009e0000003b
    [ 1948.599] (II) NOUVEAU(0): Printing probed modes for output HDMI-1
    [ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
    [ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 1972 2016 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 1948.599] (II) NOUVEAU(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1440x576i"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.600] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): EDID for output DP-1
    [ 1948.693] (II) NOUVEAU(0): Manufacturer: ACR Model: 9a Serial#: 2439097283
    [ 1948.693] (II) NOUVEAU(0): Year: 2009 Week: 16
    [ 1948.693] (II) NOUVEAU(0): EDID Version: 1.3
    [ 1948.693] (II) NOUVEAU(0): Digital Display Input
    [ 1948.693] (II) NOUVEAU(0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 1948.693] (II) NOUVEAU(0): Gamma: 2.20
    [ 1948.693] (II) NOUVEAU(0): DPMS capabilities: StandBy Suspend Off
    [ 1948.693] (II) NOUVEAU(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1948.693] (II) NOUVEAU(0): First detailed timing is preferred mode
    [ 1948.693] (II) NOUVEAU(0): redX: 0.649 redY: 0.338 greenX: 0.289 greenY: 0.609
    [ 1948.693] (II) NOUVEAU(0): blueX: 0.146 blueY: 0.070 whiteX: 0.313 whiteY: 0.329
    [ 1948.693] (II) NOUVEAU(0): Supported established timings:
    [ 1948.693] (II) NOUVEAU(0): 720x400@70Hz
    [ 1948.693] (II) NOUVEAU(0): 640x480@60Hz
    [ 1948.693] (II) NOUVEAU(0): 640x480@67Hz
    [ 1948.693] (II) NOUVEAU(0): 800x600@56Hz
    [ 1948.693] (II) NOUVEAU(0): 800x600@60Hz
    [ 1948.693] (II) NOUVEAU(0): 1024x768@60Hz
    [ 1948.693] (II) NOUVEAU(0): 1024x768@70Hz
    [ 1948.693] (II) NOUVEAU(0): Manufacturer's mask: 0
    [ 1948.693] (II) NOUVEAU(0): Supported standard timings:
    [ 1948.693] (II) NOUVEAU(0): #0: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1948.693] (II) NOUVEAU(0): #1: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1948.693] (II) NOUVEAU(0): #2: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 1948.693] (II) NOUVEAU(0): #3: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 1948.693] (II) NOUVEAU(0): #4: hsize: 1600 vsize 1200 refresh: 60 vid: 16553
    [ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.693] (II) NOUVEAU(0): clock: 148.5 MHz Image Size: 510 x 287 mm
    [ 1948.693] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1948.693] (II) NOUVEAU(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1948.693] (II) NOUVEAU(0): Monitor name: X233H
    [ 1948.693] (II) NOUVEAU(0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 185 MHz
    [ 1948.693] (II) NOUVEAU(0): Serial No: LFM0C0234040
    [ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.693] (II) NOUVEAU(0): clock: 27.0 MHz Image Size: 510 x 287 mm
    [ 1948.693] (II) NOUVEAU(0): h_active: 720 h_sync: 736 h_sync_end 798 h_blank_end 858 h_border: 0
    [ 1948.693] (II) NOUVEAU(0): v_active: 480 v_sync: 489 v_sync_end 495 v_blanking: 525 v_border: 0
    [ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.693] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
    [ 1948.693] (II) NOUVEAU(0): h_active: 1280 h_sync: 1390 h_sync_end 1430 h_blank_end 1650 h_border: 0
    [ 1948.693] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.693] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
    [ 1948.693] (II) NOUVEAU(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1948.693] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.693] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
    [ 1948.693] (II) NOUVEAU(0): h_active: 1280 h_sync: 1720 h_sync_end 1760 h_blank_end 1980 h_border: 0
    [ 1948.693] (II) NOUVEAU(0): v_active: 720 v_sync: 725 v_sync_end 730 v_blanking: 750 v_border: 0
    [ 1948.693] (II) NOUVEAU(0): Supported detailed timing:
    [ 1948.693] (II) NOUVEAU(0): clock: 74.2 MHz Image Size: 510 x 287 mm
    [ 1948.693] (II) NOUVEAU(0): h_active: 1920 h_sync: 1972 h_sync_end 2016 h_blank_end 2640 h_border: 0
    [ 1948.693] (II) NOUVEAU(0): v_active: 540 v_sync: 542 v_sync_end 547 v_blanking: 562 v_border: 0
    [ 1948.693] (II) NOUVEAU(0): Number of EDID sections to follow: 1
    [ 1948.693] (II) NOUVEAU(0): EDID (in hex):
    [ 1948.693] (II) NOUVEAU(0): 00ffffffffffff0004729a00c3ab6191
    [ 1948.693] (II) NOUVEAU(0): 1013010380331d78ea6085a6564a9c25
    [ 1948.693] (II) NOUVEAU(0): 125054b30c008180714f81009500a940
    [ 1948.693] (II) NOUVEAU(0): 010101010101023a801871382d40582c
    [ 1948.693] (II) NOUVEAU(0): 4500fe1f1100001a000000fc00583233
    [ 1948.693] (II) NOUVEAU(0): 33480a20202020202020000000fd0038
    [ 1948.693] (II) NOUVEAU(0): 4c1f5312000a202020202020000000ff
    [ 1948.693] (II) NOUVEAU(0): 004c464d3043303233343034300a0175
    [ 1948.693] (II) NOUVEAU(0): 020322f223097f074e01020384050607
    [ 1948.693] (II) NOUVEAU(0): 10111215931f148301000066030c0010
    [ 1948.693] (II) NOUVEAU(0): 00108c0ad08a20e02d10103e9600fe1f
    [ 1948.693] (II) NOUVEAU(0): 11000018011d007251d01e206e285500
    [ 1948.693] (II) NOUVEAU(0): fe1f1100001e011d8018711c1620582c
    [ 1948.693] (II) NOUVEAU(0): 2500fe1f1100009e011d00bc52d01e20
    [ 1948.693] (II) NOUVEAU(0): b8285540fe1f1100001e011d80d0721c
    [ 1948.693] (II) NOUVEAU(0): 1620342c2500fe1f1100009e0000003b
    [ 1948.693] (II) NOUVEAU(0): Printing probed modes for output DP-1
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x50.0 148.50 1920 2448 2492 2640 1080 1084 1089 1125 +hsync +vsync (56.2 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x59.9 148.35 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.4 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080i"x60.0 74.25 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.8 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 1972 2016 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080i"x50.0 74.25 1920 2448 2492 2640 1080 1084 1094 1125 interlace +hsync +vsync (28.1 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080i"x59.9 74.18 1920 2008 2052 2200 1080 1084 1094 1125 interlace +hsync +vsync (33.7 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1600x1200"x60.0 162.00 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (75.0 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1280x720"x60.0 74.25 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1280x720"x50.0 74.25 1280 1720 1760 1980 720 725 730 750 +hsync +vsync (37.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1280x720"x59.9 74.18 1280 1390 1430 1650 720 725 730 750 +hsync +vsync (45.0 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1440x576i"x50.0 27.00 1440 1464 1590 1728 576 580 586 625 interlace -hsync -vsync (15.6 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1440x480i"x60.0 27.03 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.8 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "1440x480i"x59.9 27.00 1440 1478 1602 1716 480 488 494 525 interlace -hsync -vsync (15.7 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "720x576"x50.0 27.00 720 732 796 864 576 581 586 625 -hsync -vsync (31.2 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "720x480"x60.0 27.03 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "720x480"x59.9 27.00 720 736 798 858 480 489 495 525 -hsync -vsync (31.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x59.9 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1948.693] (II) NOUVEAU(0): Output DVI-I-1 connected
    [ 1948.693] (II) NOUVEAU(0): Output DVI-D-1 connected
    [ 1948.693] (II) NOUVEAU(0): Output HDMI-1 connected
    [ 1948.693] (II) NOUVEAU(0): Output DP-1 connected
    [ 1948.693] (II) NOUVEAU(0): Using exact sizes for initial modes
    [ 1948.693] (II) NOUVEAU(0): Output DVI-I-1 using initial mode 1920x1080
    [ 1948.693] (II) NOUVEAU(0): Output DVI-D-1 using initial mode 1920x1080
    [ 1948.693] (II) NOUVEAU(0): Output HDMI-1 using initial mode 1920x1080i
    [ 1948.693] (II) NOUVEAU(0): Output DP-1 using initial mode 1920x1080i
    [ 1948.693] (II) NOUVEAU(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1948.693] (--) NOUVEAU(0): Virtual size is 1920x1080 (pitch 0)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync -vsync (67.5 kHz eP)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.693] (**) NOUVEAU(0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 1948.693] (II) NOUVEAU(0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1948.693] (==) NOUVEAU(0): DPI set to (96, 96)
    [ 1948.693] (II) Loading sub module "fb"
    [ 1948.693] (II) LoadModule: "fb"
    [ 1948.693] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1948.693] (II) Module fb: vendor="X.Org Foundation"
    [ 1948.693] compiled for 1.14.5, module version = 1.0.0
    [ 1948.693] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1948.693] (II) Loading sub module "exa"
    [ 1948.693] (II) LoadModule: "exa"
    [ 1948.693] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1948.693] (II) Module exa: vendor="X.Org Foundation"
    [ 1948.693] compiled for 1.14.5, module version = 2.6.0
    [ 1948.693] ABI class: X.Org Video Driver, version 14.1
    [ 1948.693] (II) Loading sub module "shadowfb"
    [ 1948.693] (II) LoadModule: "shadowfb"
    [ 1948.693] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1948.693] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1948.693] compiled for 1.14.5, module version = 1.0.0
    [ 1948.693] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1948.693] (II) Loading sub module "dri2"
    [ 1948.693] (II) LoadModule: "dri2"
    [ 1948.693] (II) Module "dri2" already built-in
    [ 1948.693] (--) NOUVEAU(G0): Chipset: "NVIDIA NV94"
    [ 1948.693] (==) NOUVEAU(G0): Depth 24, (--) framebuffer bpp 32
    [ 1948.693] (==) NOUVEAU(G0): RGB weight 888
    [ 1948.693] (==) NOUVEAU(G0): Default visual is TrueColor
    [ 1948.693] (==) NOUVEAU(G0): Using HW cursor
    [ 1948.693] (==) NOUVEAU(G0): GLX sync to VBlank disabled.
    [ 1948.693] (==) NOUVEAU(G0): Page flipping enabled
    [ 1948.693] (==) NOUVEAU(G0): Swap limit set to 2 [Max allowed 2]
    [ 1948.735] (II) NOUVEAU(G0): Output DVI-I-1-2 has no monitor section
    [ 1948.758] (II) NOUVEAU(G0): Output DVI-I-1-3 has no monitor section
    [ 1948.786] (II) NOUVEAU(G0): EDID for output DVI-I-1-2
    [ 1948.786] (II) NOUVEAU(G0): Manufacturer: ACR Model: e3 Serial#: 2247724
    [ 1948.786] (II) NOUVEAU(G0): Year: 2010 Week: 2
    [ 1948.786] (II) NOUVEAU(G0): EDID Version: 1.3
    [ 1948.786] (II) NOUVEAU(G0): Digital Display Input
    [ 1948.786] (II) NOUVEAU(G0): Max Image Size [cm]: horiz.: 51 vert.: 29
    [ 1948.786] (II) NOUVEAU(G0): Gamma: 2.20
    [ 1948.786] (II) NOUVEAU(G0): DPMS capabilities: StandBy Suspend
    [ 1948.786] (II) NOUVEAU(G0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 1948.786] (II) NOUVEAU(G0): First detailed timing is preferred mode
    [ 1948.786] (II) NOUVEAU(G0): redX: 0.640 redY: 0.330 greenX: 0.300 greenY: 0.600
    [ 1948.786] (II) NOUVEAU(G0): blueX: 0.150 blueY: 0.060 whiteX: 0.313 whiteY: 0.329
    [ 1948.786] (II) NOUVEAU(G0): Supported established timings:
    [ 1948.786] (II) NOUVEAU(G0): 720x400@70Hz
    [ 1948.786] (II) NOUVEAU(G0): 640x480@60Hz
    [ 1948.786] (II) NOUVEAU(G0): 640x480@67Hz
    [ 1948.786] (II) NOUVEAU(G0): 640x480@72Hz
    [ 1948.786] (II) NOUVEAU(G0): 640x480@75Hz
    [ 1948.786] (II) NOUVEAU(G0): 800x600@56Hz
    [ 1948.786] (II) NOUVEAU(G0): 800x600@60Hz
    [ 1948.786] (II) NOUVEAU(G0): 800x600@72Hz
    [ 1948.786] (II) NOUVEAU(G0): 800x600@75Hz
    [ 1948.786] (II) NOUVEAU(G0): 832x624@75Hz
    [ 1948.786] (II) NOUVEAU(G0): 1024x768@60Hz
    [ 1948.786] (II) NOUVEAU(G0): 1024x768@70Hz
    [ 1948.786] (II) NOUVEAU(G0): 1024x768@75Hz
    [ 1948.786] (II) NOUVEAU(G0): 1280x1024@75Hz
    [ 1948.786] (II) NOUVEAU(G0): 1152x864@75Hz
    [ 1948.786] (II) NOUVEAU(G0): Manufacturer's mask: 0
    [ 1948.786] (II) NOUVEAU(G0): Supported standard timings:
    [ 1948.786] (II) NOUVEAU(G0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
    [ 1948.786] (II) NOUVEAU(G0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
    [ 1948.786] (II) NOUVEAU(G0): #2: hsize: 1280 vsize 720 refresh: 60 vid: 49281
    [ 1948.786] (II) NOUVEAU(G0): #3: hsize: 1280 vsize 800 refresh: 60 vid: 129
    [ 1948.786] (II) NOUVEAU(G0): #4: hsize: 1360 vsize 765 refresh: 60 vid: 49291
    [ 1948.786] (II) NOUVEAU(G0): #5: hsize: 1440 vsize 900 refresh: 60 vid: 149
    [ 1948.786] (II) NOUVEAU(G0): #6: hsize: 1680 vsize 1050 refresh: 60 vid: 179
    [ 1948.786] (II) NOUVEAU(G0): #7: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
    [ 1948.786] (II) NOUVEAU(G0): Supported detailed timing:
    [ 1948.786] (II) NOUVEAU(G0): clock: 148.5 MHz Image Size: 510 x 287 mm
    [ 1948.786] (II) NOUVEAU(G0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
    [ 1948.786] (II) NOUVEAU(G0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
    [ 1948.786] (II) NOUVEAU(G0): Ranges: V min: 56 V max: 76 Hz, H min: 31 H max: 83 kHz, PixClock max 175 MHz
    [ 1948.786] (II) NOUVEAU(G0): Monitor name: H233H
    [ 1948.786] (II) NOUVEAU(G0): Serial No: LHB0D0228550
    [ 1948.786] (II) NOUVEAU(G0): EDID (in hex):
    [ 1948.786] (II) NOUVEAU(G0): 00ffffffffffff000472e3002c4c2200
    [ 1948.786] (II) NOUVEAU(G0): 0214010380331d78caee95a3544c9926
    [ 1948.786] (II) NOUVEAU(G0): 0f5054bfef80714f818081c081008bc0
    [ 1948.786] (II) NOUVEAU(G0): 9500b300d1c0023a801871382d40582c
    [ 1948.786] (II) NOUVEAU(G0): 4500fe1f1100001e000000fd00384c1f
    [ 1948.786] (II) NOUVEAU(G0): 5311000a202020202020000000fc0048
    [ 1948.786] (II) NOUVEAU(G0): 323333480a20202020202020000000ff
    [ 1948.786] (II) NOUVEAU(G0): 004c48423044303232383535300a0046
    [ 1948.786] (II) NOUVEAU(G0): Printing probed modes for output DVI-I-1-2
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.786] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1948.809] (II) NOUVEAU(G0): EDID for output DVI-I-1-3
    [ 1948.809] (II) NOUVEAU(G0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 1948.809] (--) NOUVEAU(G0): Virtual size is 1024x768 (pitch 0)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1920x1080": 148.5 MHz (scaled from 0.0 MHz), 67.5 kHz, 60.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz eP)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1680x1050": 119.0 MHz (scaled from 0.0 MHz), 64.7 kHz, 59.9 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1680x1050"x59.9 119.00 1680 1728 1760 1840 1050 1053 1059 1080 +hsync -vsync (64.7 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1280x1024": 135.0 MHz (scaled from 0.0 MHz), 80.0 kHz, 75.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1280x1024": 108.0 MHz (scaled from 0.0 MHz), 64.0 kHz, 60.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1440x900": 88.8 MHz (scaled from 0.0 MHz), 55.5 kHz, 59.9 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1440x900"x59.9 88.75 1440 1488 1520 1600 900 903 909 926 +hsync -vsync (55.5 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Mode "1360x768": 84.8 MHz (scaled from 0.0 MHz), 47.7 kHz, 59.8 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1360x768"x59.8 84.75 1366 1431 1567 1776 768 771 781 798 -hsync +vsync (47.7 kHz)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1280x800": 71.0 MHz (scaled from 0.0 MHz), 49.3 kHz, 59.9 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1280x800"x59.9 71.00 1280 1328 1360 1440 800 803 809 823 +hsync -vsync (49.3 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1152x864": 108.0 MHz (scaled from 0.0 MHz), 67.5 kHz, 75.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Mode "1280x720": 74.4 MHz (scaled from 0.0 MHz), 44.7 kHz, 60.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1280x720"x60.0 74.44 1280 1336 1472 1664 720 721 724 746 -hsync +vsync (44.7 kHz)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1024x768": 78.8 MHz (scaled from 0.0 MHz), 60.1 kHz, 75.1 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1024x768"x75.1 78.80 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.1 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1024x768": 75.0 MHz (scaled from 0.0 MHz), 56.5 kHz, 70.1 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1024x768"x70.1 75.00 1024 1048 1184 1328 768 771 777 806 -hsync -vsync (56.5 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "1024x768": 65.0 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "832x624": 57.3 MHz (scaled from 0.0 MHz), 49.7 kHz, 74.6 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "832x624"x74.6 57.28 832 864 928 1152 624 625 628 667 -hsync -vsync (49.7 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "800x600": 50.0 MHz (scaled from 0.0 MHz), 48.1 kHz, 72.2 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "800x600"x72.2 50.00 800 856 976 1040 600 637 643 666 +hsync +vsync (48.1 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "800x600": 49.5 MHz (scaled from 0.0 MHz), 46.9 kHz, 75.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "800x600": 40.0 MHz (scaled from 0.0 MHz), 37.9 kHz, 60.3 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "800x600"x60.3 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "800x600": 36.0 MHz (scaled from 0.0 MHz), 35.2 kHz, 56.2 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "800x600"x56.2 36.00 800 824 896 1024 600 601 603 625 +hsync +vsync (35.2 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.5 kHz, 75.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "640x480": 31.5 MHz (scaled from 0.0 MHz), 37.9 kHz, 72.8 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "640x480"x72.8 31.50 640 664 704 832 480 489 491 520 -hsync -vsync (37.9 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "640x480": 30.2 MHz (scaled from 0.0 MHz), 35.0 kHz, 66.7 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "640x480"x66.7 30.24 640 704 768 864 480 483 486 525 -hsync -vsync (35.0 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "640x480": 25.2 MHz (scaled from 0.0 MHz), 31.5 kHz, 60.0 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "640x480"x60.0 25.20 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz e)
    [ 1948.809] (**) NOUVEAU(G0): Driver mode "720x400": 28.3 MHz (scaled from 0.0 MHz), 31.5 kHz, 70.1 Hz
    [ 1948.809] (II) NOUVEAU(G0): Modeline "720x400"x70.1 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz e)
    [ 1948.809] (==) NOUVEAU(G0): DPI set to (96, 96)
    [ 1948.809] (II) Loading sub module "fb"
    [ 1948.809] (II) LoadModule: "fb"
    [ 1948.809] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 1948.809] (II) Module fb: vendor="X.Org Foundation"
    [ 1948.809] compiled for 1.14.5, module version = 1.0.0
    [ 1948.809] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1948.809] (II) Loading sub module "exa"
    [ 1948.809] (II) LoadModule: "exa"
    [ 1948.809] (II) Loading /usr/lib/xorg/modules/libexa.so
    [ 1948.809] (II) Module exa: vendor="X.Org Foundation"
    [ 1948.809] compiled for 1.14.5, module version = 2.6.0
    [ 1948.809] ABI class: X.Org Video Driver, version 14.1
    [ 1948.809] (II) Loading sub module "shadowfb"
    [ 1948.809] (II) LoadModule: "shadowfb"
    [ 1948.809] (II) Loading /usr/lib/xorg/modules/libshadowfb.so
    [ 1948.809] (II) Module shadowfb: vendor="X.Org Foundation"
    [ 1948.809] compiled for 1.14.5, module version = 1.0.0
    [ 1948.809] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 1948.809] (--) Depth 24 pixmap format is 32 bpp
    [ 1948.810] (II) NOUVEAU(G0): Opened GPU channel 0
    [ 1948.816] (II) NOUVEAU(G0): [DRI2] Setup complete
    [ 1948.816] (II) NOUVEAU(G0): [DRI2] DRI driver: nouveau
    [ 1948.816] (II) NOUVEAU(G0): [DRI2] VDPAU driver: nouveau
    [ 1948.817] (II) EXA(256): Driver allocated offscreen pixmaps
    [ 1948.817] (II) EXA(256): Driver registered support for the following operations:
    [ 1948.817] (II) Solid
    [ 1948.817] (II) Copy
    [ 1948.817] (II) Composite (RENDER acceleration)
    [ 1948.817] (II) UploadToScreen
    [ 1948.817] (II) DownloadFromScreen
    [ 1948.817] (==) NOUVEAU(G0): Backing store disabled
    [ 1948.817] (==) NOUVEAU(G0): Silken mouse enabled
    [ 1948.817] (II) NOUVEAU(G0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1948.817] (II) NOUVEAU(G0): [XvMC] Extension initialized.
    [ 1948.817] (==) NOUVEAU(G0): DPMS enabled
    [ 1948.817] (II) NOUVEAU(G0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1948.820] (II) NOUVEAU(0): Opened GPU channel 0
    [ 1948.825] (II) NOUVEAU(0): [DRI2] Setup complete
    [ 1948.825] (II) NOUVEAU(0): [DRI2] DRI driver: nouveau
    [ 1948.825] (II) NOUVEAU(0): [DRI2] VDPAU driver: nouveau
    [ 1948.825] (II) EXA(0): Driver allocated offscreen pixmaps
    [ 1948.825] (II) EXA(0): Driver registered support for the following operations:
    [ 1948.825] (II) Solid
    [ 1948.825] (II) Copy
    [ 1948.825] (II) Composite (RENDER acceleration)
    [ 1948.825] (II) UploadToScreen
    [ 1948.825] (II) DownloadFromScreen
    [ 1948.825] (==) NOUVEAU(0): Backing store disabled
    [ 1948.825] (==) NOUVEAU(0): Silken mouse enabled
    [ 1948.825] (II) NOUVEAU(0): [XvMC] Associated with Nouveau GeForce 8/9 Textured Video.
    [ 1948.825] (II) NOUVEAU(0): [XvMC] Extension initialized.
    [ 1948.825] (==) NOUVEAU(0): DPMS enabled
    [ 1948.825] (II) NOUVEAU(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 1948.825] (--) RandR disabled
    [ 1948.841] (II) AIGLX: enabled GLX_MESA_copy_sub_buffer
    [ 1948.841] (II) AIGLX: enabled GLX_INTEL_swap_event
    [ 1948.841] (II) AIGLX: enabled GLX_ARB_create_context
    [ 1948.841] (II) AIGLX: enabled GLX_ARB_create_context_profile
    [ 1948.841] (II) AIGLX: enabled GLX_EXT_create_context_es2_profile
    [ 1948.841] (II) AIGLX: enabled GLX_SGI_swap_control and GLX_MESA_swap_control
    [ 1948.841] (II) AIGLX: GLX_EXT_texture_from_pixmap backed by buffer objects
    [ 1948.842] (II) AIGLX: Loaded and initialized nouveau
    [ 1948.842] (II) GLX: Initialized DRI2 GL provider for screen 0
    [ 1948.844] (II) NOUVEAU(G0): NVEnterVT is called.
    [ 1948.845] (II) NOUVEAU(0): NVEnterVT is called.
    [ 1948.924] (II) NOUVEAU(0): Setting screen physical size to 508 x 285
    [ 1948.924] resize called 1920 1080
    [ 1948.961] (II) Using input driver 'mouse' for 'Mouse0'
    [ 1948.961] (**) Option "CorePointer" "on"
    [ 1948.961] (**) Mouse0: always reports core events
    [ 1948.961] (**) Option "Protocol" "auto"
    [ 1948.961] (**) Option "Device" "/dev/psaux"
    [ 1948.961] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    [ 1948.961] (**) Mouse0: Protocol: "auto"
    [ 1948.961] (**) Mouse0: always reports core events
    [ 1949.009] (**) Option "Emulate3Buttons" "no"
    [ 1949.009] (**) Option "ZAxisMapping" "4 5"
    [ 1949.009] (**) Mouse0: ZAxisMapping: buttons 4 and 5
    [ 1949.009] (**) Mouse0: Buttons: 9
    [ 1949.009] (II) XINPUT: Adding extended input device "Mouse0" (type: MOUSE, id 6)
    [ 1949.009] (**) Mouse0: (accel) keeping acceleration scheme 1
    [ 1949.009] (**) Mouse0: (accel) acceleration profile 0
    [ 1949.010] (**) Mouse0: (accel) acceleration factor: 2.000
    [ 1949.010] (**) Mouse0: (accel) acceleration threshold: 4
    [ 1949.010] (II) Mouse0: Setting mouse protocol to "ExplorerPS/2"
    [ 1949.302] (II) Mouse0: ps2EnableDataReporting: succeeded
    [ 1949.302] (II) Using input driver 'kbd' for 'Keyboard0'
    [ 1949.302] (**) Option "CoreKeyboard" "on"
    [ 1949.302] (**) Keyboard0: always reports core events
    [ 1949.302] (**) Keyboard0: always reports core events
    [ 1949.302] (**) Option "Protocol" "standard"
    [ 1949.302] (**) Option "XkbRules" "base"
    [ 1949.302] (**) Option "XkbModel" "pc105"
    [ 1949.302] (**) Option "XkbLayout" "us"
    [ 1949.302] (**) Option "XkbOptions" "altwin:ctrl_win"
    [ 1949.302] (II) XINPUT: Adding extended input device "Keyboard0" (type: KEYBOARD, id 7)
    [ 1949.312] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 1949.312] (II) AutoAddDevices is off - not adding device.
    [ 1949.312] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 1949.312] (II) AutoAddDevices is off - not adding device.
    [ 1949.312] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 1949.312] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event18)
    [ 1949.312] (II) AutoAddDevices is off - not adding device.
    [ 1949.312] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event17)
    [ 1949.312] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event16)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event15)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding drm device (/dev/dri/card1)
    [ 1949.313] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device UVC Camera (046d:081a) (/dev/input/event19)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Line Out Surround (/dev/input/event9)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Line Out CLFE (/dev/input/event8)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Line Out Side (/dev/input/event7)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event6)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event13)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.313] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event12)
    [ 1949.313] (II) AutoAddDevices is off - not adding device.
    [ 1949.314] (II) config/udev: Adding input device HDA Intel PCH Line (/dev/input/event11)
    [ 1949.314] (II) AutoAddDevices is off - not adding device.
    [ 1949.314] (II) config/udev: Adding input device HDA Intel PCH Line Out Front (/dev/input/event10)
    [ 1949.314] (II) AutoAddDevices is off - not adding device.
    [ 1949.314] (II) config/udev: Adding input device Eee PC WMI hotkeys (/dev/input/event14)
    [ 1949.314] (II) AutoAddDevices is off - not adding device.
    [ 1949.314] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 1949.314] (II) AutoAddDevices is off - not adding device.
    [ 1949.314] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
    [ 1949.314] (II) AutoAddDevices is off - not adding device.
    If I try to start xfce with startx, the Xorg.0.log is as follows:
    X.Org X Server 1.14.5
    Release Date: 2013-12-12
    [ 2456.395] X Protocol Version 11, Revision 0
    [ 2456.395] Build Operating System: Linux 3.12.5-1-ARCH x86_64
    [ 2456.395] Current Operating System: Linux Neo 3.12.5-1-ARCH #1 SMP PREEMPT Thu Dec 12 12:57:31 CET 2013 x86_64
    [ 2456.395] Kernel command line: root=/dev/sda1 resume=/dev/sdb3 ro init=/usr/lib/systemd/systemd
    [ 2456.395] Build Date: 13 December 2013 03:11:42PM
    [ 2456.395]
    [ 2456.396] Current version of pixman: 0.32.4
    [ 2456.396] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 2456.396] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 2456.397] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Dec 22 20:17:49 2013
    [ 2456.397] (==) Using config file: "/etc/X11/xorg.conf"
    [ 2456.397] (==) No Layout section. Using the first Screen section.
    [ 2456.397] (==) No screen section available. Using defaults.
    [ 2456.397] (**) |-->Screen "Default Screen Section" (0)
    [ 2456.397] (**) | |-->Monitor "<default monitor>"
    [ 2456.397] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 2456.397] (**) | |-->Device "Device0"
    [ 2456.397] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 2456.397] (**) Option "AutoAddDevices" "False"
    [ 2456.397] (**) Not automatically adding devices
    [ 2456.397] (==) Automatically enabling devices
    [ 2456.397] (==) Automatically adding GPU devices
    [ 2456.397] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 2456.397] Entry deleted from font path.
    [ 2456.397] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 2456.397] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 2456.397] (==) |-->Input Device "Mouse0"
    [ 2456.397] (==) |-->Input Device "Keyboard0"
    [ 2456.397] (==) No Layout section. Using the first mouse device.
    [ 2456.397] (==) No Layout section. Using the first keyboard device.
    [ 2456.397] (II) Loader magic: 0x7fec20
    [ 2456.397] (II) Module ABI versions:
    [ 2456.397] X.Org ANSI C Emulation: 0.4
    [ 2456.397] X.Org Video Driver: 14.1
    [ 2456.397] X.Org XInput driver : 19.1
    [ 2456.397] X.Org Server Extension : 7.0
    [ 2456.397] (II) xfree86: Adding drm device (/dev/dri/card0)
    [ 2456.397] (II) xfree86: Adding drm device (/dev/dri/card1)
    [ 2456.549] (--) PCI:*(0:1:0:0) 10de:1187:1458:360b rev 161, Mem @ 0xf6000000/16777216, 0xe0000000/134217728, 0xe8000000/33554432, I/O @ 0x0000e000/128, BIOS @ 0x????????/524288
    [ 2456.549] (--) PCI: (0:2:0:0) 10de:0622:3842:c858 rev 161, Mem @ 0xf4000000/16777216, 0xd0000000/268435456, 0xf2000000/33554432, I/O @ 0x0000d000/128, BIOS @ 0x????????/524288
    [ 2456.549] Initializing built-in extension Generic Event Extension
    [ 2456.549] Initializing built-in extension SHAPE
    [ 2456.549] Initializing built-in extension MIT-SHM
    [ 2456.549] Initializing built-in extension XInputExtension
    [ 2456.550] Initializing built-in extension XTEST
    [ 2456.550] Initializing built-in extension BIG-REQUESTS
    [ 2456.550] Initializing built-in extension SYNC
    [ 2456.550] Initializing built-in extension XKEYBOARD
    [ 2456.550] Initializing built-in extension XC-MISC
    [ 2456.550] Initializing built-in extension SECURITY
    [ 2456.551] Initializing built-in extension XINERAMA
    [ 2456.551] Initializing built-in extension XFIXES
    [ 2456.551] Initializing built-in extension RENDER
    [ 2456.551] Initializing built-in extension RANDR
    [ 2456.551] Initializing built-in extension COMPOSITE
    [ 2456.551] Initializing built-in extension DAMAGE
    [ 2456.552] Initializing built-in extension MIT-SCREEN-SAVER
    [ 2456.552] Initializing built-in extension DOUBLE-BUFFER
    [ 2456.552] Initializing built-in extension RECORD
    [ 2456.552] Initializing built-in extension DPMS
    [ 2456.552] Initializing built-in extension X-Resource
    [ 2456.553] Initializing built-in extension XVideo
    [ 2456.553] Initializing built-in extension XVideo-MotionCompensation
    [ 2456.553] Initializing built-in extension XFree86-VidModeExtension
    [ 2456.553] Initializing built-in extension XFree86-DGA
    [ 2456.553] Initializing built-in extension XFree86-DRI
    [ 2456.553] Initializing built-in extension DRI2
    [ 2456.553] (II) LoadModule: "glx"
    [ 2456.553] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 2456.553] (II) Module glx: vendor="X.Org Foundation"
    [ 2456.553] compiled for 1.14.5, module version = 1.0.0
    [ 2456.553] ABI class: X.Org Server Extension, version 7.0
    [ 2456.553] (==) AIGLX enabled
    [ 2456.554] Loading extension GLX
    [ 2456.554] (II) LoadModule: "nouveau"
    [ 2456.554] (II) Loading /usr/lib/xorg/modules/drivers/nouveau_drv.so
    [ 2456.554] (II) Module nouveau: vendor="X.Org Foundation"
    [ 2456.554] compiled for 1.14.4, module version = 1.0.10
    [ 2456.554] Module class: X.Org Video Driver
    [ 2456.554] ABI class: X.Org Video Driver, version 14.1
    [ 2456.554] (II) Loa

  • [SOLVED] nouveau: EDID checksum is invalid, resolution broken...

    Lately I got problems with my notebook and the monitor setup. It might be related to the forum topics Resolution broken - EDID issue? or EDID Checksum error on boot, but anything posted there did not resolved my issue.
    Hardware: Dell Latitude E6400, E-Port Replicator PR01X/02X, Samsung SyncMaster 2243EW (1680x1050), dual-head setup (DP-1 and VGA-1 connected), nVidia Quadro NVS 160M, xf86-video-nouveau (0.0.16_git20120210-1), Arch running Gnome 3.4.1 with all updates (2012-05-05)
    Symptom: The monitor connected to VGA-1 gets wrong resolution (1024x768) or stays blank, dmesg shows EDID checksum errors (see full logs in this post). Infrequently the boot into X/Gnome shows garbage after login and the system crashes. This (blank, garbage, crashes) also happens when trying to fix the resolution via
    $ xrandr --output DP-1 --auto --primary --output VGA-1 --auto --right-of DP-1
    When probing with xrandr, all resolutions are correctly found
    $ xrandr --props
    -> result
    but sometimes the mouse pointer is gone after this command; also the VGA monitor goes or stays blank.
    When using the Gnome System-Settings->Displays applet to adjust the monitors, it sometimes results into garbage screens or crashes.
    Comments: First I suspected a hardware error (that's why I cannot give an exact date when these errors first occured), but I cross checked several setups. Switched screens (right/left), exchanged Port Replicator: no improvement. Moving KMS from early to late start: no improvement.
    Fedora 16 Live USB (dual-head, several boots): no errors. Also I happened to have a similar setup at my office with Samsung SyncMaster 203B (1400x1050): no errors.
    A downgrade to the previous nouveau version did not work, the system failed to boot into X/Gnome at all.
    The problems might be related to the nouveau troubleshooting topic, but I am not sure.
    Logs and configuration: Following a dmesg after boot and the relevant xorg.conf.d files.
    Anyone else with similar issues, or any idea what might be the cause?
    Cheers,
    christoph
    P.S.: Sorry for the long post, but it might serve as a reference when filing a bug.
    Last edited by roepi (2012-06-20 09:29:05)

    I have the same issues with Fedora 17 Beta (2012-05-05) LiveCD, same EDID checksum errors, same wrong resolution; see dmesg log. So I assume there is something with the new nouveau DRM.
    I found an old bug in the nouveau-freedesktop bugtracker, but last activity is Nov 2011 and I am not sure if it is related.
    What is the best to handle this issue, file a bug with Arch Linux, file a bug with nouveau-freedesktop? (Although it says on their website
    If you are using packages from your distribution, send the bug reports to your distribution and not directly to us.
    Help is appreciated, best regards,
    christoph

  • Removed Nouveau, installed Nvidia, black login screen

    Hi there!
    Seems like I was just here yesterday...  But seriously, it's coming together.
    Today I hooked up my second monitor and tried to get the "one big monitor" effect with noveau, but it wasn't recognizing my setup.  I've had success with installing proprietary nvidia stuff before, so I did the
    "# pacman -S nvidia nvidia-utils"
    after removing "nouveau-dri" and the "libgl" business.   I did all that from the bash login screen (which I'd like to keep as the first screen, instead of booting directly into GUI/DE).  After I rebooted, like the guide says to do, the bootloader went through fine, but then sat at a black screen.  After a couple of hard reboots I tried to just type root, password, and kdm, even though I couldn't see anything on the screen.  That worked to get me into the DE.  Problem is, that sucks and I have no idea how to get my bash login screen back, or what I did to lose it.  Anyone know where to look or what to do?  I've not found any info on the forum, or via google... Thank you once again!

    My video card is an Nvidia GEForce 9400 GT.  There are no "EE" errors in the Xorg.0.log, a couple of fails, to do with APCI, and nothing in the errors.log or daemon.log (whether or not I should look in those for this issue, I'm still learning.  I did indeed run "nvidia-xconfig" as root.  Not sure what I'm missing.  It does now recognize both monitors after I blindly root login and launch kdm, but ya know... Below is the var/log/xorg.0.log in case this means anything to anyone out there... I'm thinking about doing a fresh install now that I know a few more things.
    I installed the entire kdm-meta package and I only really want to install a terminal and do the rest of it that way, if possible.  If it's any pennance for my blatant naievete, I am having fun learning from these mistakes!  Thanks for the input non-noobs!
    Cheers!
    X.Org X Server 1.10.4
    Release Date: 2011-08-19
    [ 148.922] X Protocol Version 11, Revision 0
    [ 148.922] Build Operating System: Linux 3.0-ARCH i686
    [ 148.922] Current Operating System: Linux archsteven 3.0-ARCH #1 SMP PREEMPT Tue Aug 30 07:32:23 UTC 2011 i686
    [ 148.922] Kernel command line: root=/dev/disk/by-uuid/1990c60c-750b-43ac-88d8-36ebcc453471 ro
    [ 148.922] Build Date: 17 September 2011 07:40:13AM
    [ 148.922]
    [ 148.922] Current version of pixman: 0.22.2
    [ 148.922] Before reporting problems, check [url]http://wiki.x.org[/url]
    to make sure that you have the latest version.
    [ 148.922] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 148.923] (==) Log file: "/var/log/Xorg.0.log", Time: Sun Oct 2 13:51:35 2011
    [ 148.979] (==) Using config file: "/etc/X11/xorg.conf"
    [ 148.979] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 148.998] (==) ServerLayout "Layout0"
    [ 148.998] (**) |-->Screen "Screen0" (0)
    [ 148.998] (**) | |-->Monitor "Monitor0"
    [ 148.999] (**) | |-->Device "Device0"
    [ 148.999] (**) |-->Input Device "Keyboard0"
    [ 148.999] (**) |-->Input Device "Mouse0"
    [ 148.999] (==) Automatically adding devices
    [ 148.999] (==) Automatically enabling devices
    [ 149.050] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 149.050] Entry deleted from font path.
    [ 149.050] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [ 149.050] Entry deleted from font path.
    [ 149.051] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [ 149.051] Entry deleted from font path.
    [ 149.051] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [ 149.051] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [ 149.051] Entry deleted from font path.
    [ 149.051] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [ 149.051] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/
    [ 149.051] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 149.051] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
    [ 149.051] (WW) Disabling Keyboard0
    [ 149.051] (WW) Disabling Mouse0
    [ 149.051] (II) Loader magic: 0x8230d40
    [ 149.051] (II) Module ABI versions:
    [ 149.051] X.Org ANSI C Emulation: 0.4
    [ 149.051] X.Org Video Driver: 10.0
    [ 149.051] X.Org XInput driver : 12.2
    [ 149.051] X.Org Server Extension : 5.0
    [ 149.053] (--) PCI: (0:0:2:0) 8086:2572:1028:017a rev 2, Mem @ 0xa0000000/134217728, 0xfeb80000/524288, I/O @ 0x0000ed98/8
    [ 149.053] (--) PCI:*(0:2:0:0) 10de:065b:3842:b946 rev 161, Mem @ 0xfd000000/16777216, 0xc0000000/536870912, 0xfa000000/33554432, I/O @ 0x0000cf00/128, BIOS @ 0x????????/524288
    [ 149.053] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [ 149.053] (II) LoadModule: "extmod"
    [ 149.062] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 149.068] (II) Module extmod: vendor="X.Org Foundation"
    [ 149.068] compiled for 1.10.4, module version = 1.0.0
    [ 149.068] Module class: X.Org Server Extension
    [ 149.068] ABI class: X.Org Server Extension, version 5.0
    [ 149.068] (II) Loading extension MIT-SCREEN-SAVER
    [ 149.068] (II) Loading extension XFree86-VidModeExtension
    [ 149.068] (II) Loading extension XFree86-DGA
    [ 149.068] (II) Loading extension DPMS
    [ 149.068] (II) Loading extension XVideo
    [ 149.068] (II) Loading extension XVideo-MotionCompensation
    [ 149.068] (II) Loading extension X-Resource
    [ 149.068] (II) LoadModule: "dbe"
    [ 149.068] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 149.070] (II) Module dbe: vendor="X.Org Foundation"
    [ 149.070] compiled for 1.10.4, module version = 1.0.0
    [ 149.070] Module class: X.Org Server Extension
    [ 149.070] ABI class: X.Org Server Extension, version 5.0
    [ 149.070] (II) Loading extension DOUBLE-BUFFER
    [ 149.070] (II) LoadModule: "glx"
    [ 149.070] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 149.978] (II) Module glx: vendor="NVIDIA Corporation"
    [ 149.978] compiled for 4.0.2, module version = 1.0.0
    [ 149.978] Module class: X.Org Server Extension
    [ 149.978] (II) NVIDIA GLX Module 280.13 Wed Jul 27 17:14:51 PDT 2011
    [ 149.978] (II) Loading extension GLX
    [ 149.978] (II) LoadModule: "record"
    [ 149.979] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 149.986] (II) Module record: vendor="X.Org Foundation"
    [ 149.986] compiled for 1.10.4, module version = 1.13.0
    [ 149.986] Module class: X.Org Server Extension
    [ 149.986] ABI class: X.Org Server Extension, version 5.0
    [ 149.986] (II) Loading extension RECORD
    [ 149.986] (II) LoadModule: "dri"
    [ 149.986] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 150.000] (II) Module dri: vendor="X.Org Foundation"
    [ 150.000] compiled for 1.10.4, module version = 1.0.0
    [ 150.000] ABI class: X.Org Server Extension, version 5.0
    [ 150.000] (II) Loading extension XFree86-DRI
    [ 150.000] (II) LoadModule: "dri2"
    [ 150.000] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 150.001] (II) Module dri2: vendor="X.Org Foundation"
    [ 150.001] compiled for 1.10.4, module version = 1.2.0
    [ 150.001] ABI class: X.Org Server Extension, version 5.0
    [ 150.001] (II) Loading extension DRI2
    [ 150.001] (II) LoadModule: "nvidia"
    [ 150.018] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 150.064] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 150.064] compiled for 4.0.2, module version = 1.0.0
    [ 150.064] Module class: X.Org Video Driver
    [ 150.090] (II) NVIDIA dlloader X Driver 280.13 Wed Jul 27 16:57:12 PDT 2011
    [ 150.112] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 150.118] (++) using VT number 7
    [ 150.145] (II) Loading sub module "fb"
    [ 150.146] (II) LoadModule: "fb"
    [ 150.146] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 150.154] (II) Module fb: vendor="X.Org Foundation"
    [ 150.154] compiled for 1.10.4, module version = 1.0.0
    [ 150.154] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 150.154] (II) Loading sub module "wfb"
    [ 150.154] (II) LoadModule: "wfb"
    [ 150.169] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 150.182] (II) Module wfb: vendor="X.Org Foundation"
    [ 150.182] compiled for 1.10.4, module version = 1.0.0
    [ 150.182] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 150.182] (II) Loading sub module "ramdac"
    [ 150.182] (II) LoadModule: "ramdac"
    [ 150.182] (II) Module "ramdac" already built-in
    [ 150.198] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 150.198] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 150.198] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 150.212] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
    [ 150.212] (==) NVIDIA(0): RGB weight 888
    [ 150.212] (==) NVIDIA(0): Default visual is TrueColor
    [ 150.212] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 150.212] (**) NVIDIA(0): Option "TwinView" "True"
    [ 150.213] (**) NVIDIA(0): Option "MetaModes" "nvidia-auto-select, nvidia-auto-select"
    [ 152.280] (II) NVIDIA(GPU-0): Display (DELL 1907FP (CRT-1)) does not support NVIDIA 3D
    [ 152.280] (II) NVIDIA(GPU-0): Vision stereo.
    [ 152.402] (II) NVIDIA(GPU-0): Display (NVT Novatek 563D (DFP-0)) does not support NVIDIA 3D
    [ 152.402] (II) NVIDIA(GPU-0): Vision stereo.
    [ 152.413] (II) NVIDIA(0): NVIDIA GPU GeForce 9400 GT (G96) at PCI:2:0:0 (GPU-0)
    [ 152.413] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 152.413] (--) NVIDIA(0): VideoBIOS: 62.94.73.00.40
    [ 152.413] (II) NVIDIA(0): Detected PCI Express Link width: 1X
    [ 152.413] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 152.413] (--) NVIDIA(0): Connected display device(s) on GeForce 9400 GT at PCI:2:0:0
    [ 152.413] (--) NVIDIA(0): DELL 1907FP (CRT-1)
    [ 152.413] (--) NVIDIA(0): NVT Novatek 563D (DFP-0)
    [ 152.413] (--) NVIDIA(0): DELL 1907FP (CRT-1): 400.0 MHz maximum pixel clock
    [ 152.413] (--) NVIDIA(0): NVT Novatek 563D (DFP-0): 330.0 MHz maximum pixel clock
    [ 152.413] (--) NVIDIA(0): NVT Novatek 563D (DFP-0): Internal Dual Link TMDS
    [ 152.415] (**) NVIDIA(0): TwinView enabled
    [ 152.553] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
    [ 152.553] (**) NVIDIA(0): enabled on all display devices.
    [ 152.578] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID has been
    [ 152.578] (**) NVIDIA(0): enabled on all display devices.
    [ 152.701] (II) NVIDIA(0): Assigned Display Devices: CRT-1, DFP-0
    [ 152.702] (II) NVIDIA(0): Validated modes:
    [ 152.703] (II) NVIDIA(0): "nvidia-auto-select,nvidia-auto-select"
    [ 152.703] (II) NVIDIA(0): Virtual screen size determined to be 2560 x 1024
    [ 152.729] (--) NVIDIA(0): DPI set to (85, 86); computed from "UseEdidDpi" X config
    [ 152.730] (--) NVIDIA(0): option
    [ 152.730] (--) Depth 24 pixmap format is 32 bpp
    [ 152.730] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 152.742] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 152.742] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 152.742] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 152.742] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 152.742] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 152.742] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 152.742] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 152.742] (II) NVIDIA(0): Config Options in the README.
    [ 152.744] (II) NVIDIA(0): Setting mode "nvidia-auto-select,nvidia-auto-select"
    [ 152.830] (II) Loading extension NV-GLX
    [ 152.978] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 152.978] (==) NVIDIA(0): Backing store disabled
    [ 152.978] (==) NVIDIA(0): Silken mouse enabled
    [ 152.980] (**) NVIDIA(0): DPMS enabled
    [ 152.980] (II) Loading extension NV-CONTROL
    [ 152.981] (II) Loading extension XINERAMA
    [ 152.981] (II) Loading sub module "dri2"
    [ 152.981] (II) LoadModule: "dri2"
    [ 152.981] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 152.981] (II) Module dri2: vendor="X.Org Foundation"
    [ 152.981] compiled for 1.10.4, module version = 1.2.0
    [ 152.981] ABI class: X.Org Server Extension, version 5.0
    [ 152.981] (II) NVIDIA(0): [DRI2] Setup complete
    [ 152.981] (==) RandR enabled
    [ 152.981] (II) Initializing built-in extension Generic Event Extension
    [ 152.981] (II) Initializing built-in extension SHAPE
    [ 152.982] (II) Initializing built-in extension MIT-SHM
    [ 152.982] (II) Initializing built-in extension XInputExtension
    [ 152.982] (II) Initializing built-in extension XTEST
    [ 152.982] (II) Initializing built-in extension BIG-REQUESTS
    [ 152.982] (II) Initializing built-in extension SYNC
    [ 152.982] (II) Initializing built-in extension XKEYBOARD
    [ 152.982] (II) Initializing built-in extension XC-MISC
    [ 152.982] (II) Initializing built-in extension SECURITY
    [ 152.982] (II) Initializing built-in extension XINERAMA
    [ 152.982] (II) Initializing built-in extension XFIXES
    [ 152.982] (II) Initializing built-in extension RENDER
    [ 152.982] (II) Initializing built-in extension RANDR
    [ 152.982] (II) Initializing built-in extension COMPOSITE
    [ 152.982] (II) Initializing built-in extension DAMAGE
    [ 152.986] (II) Initializing extension GLX
    [ 153.413] (II) config/udev: Adding input device Power Button (/dev/input/event5)
    [ 153.413] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 153.413] (II) LoadModule: "evdev"
    [ 153.433] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 153.442] (II) Module evdev: vendor="X.Org Foundation"
    [ 153.442] compiled for 1.10.0, module version = 2.6.0
    [ 153.442] Module class: X.Org XInput Driver
    [ 153.442] ABI class: X.Org XInput driver, version 12.2
    [ 153.442] (II) Using input driver 'evdev' for 'Power Button'
    [ 153.442] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 153.442] (**) Power Button: always reports core events
    [ 153.442] (**) Power Button: Device: "/dev/input/event5"
    [ 153.442] (--) Power Button: Found keys
    [ 153.442] (II) Power Button: Configuring as keyboard
    [ 153.442] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input5/event5"
    [ 153.442] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 153.442] (**) Option "xkb_rules" "evdev"
    [ 153.442] (**) Option "xkb_model" "evdev"
    [ 153.442] (**) Option "xkb_layout" "us"
    [ 153.494] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 153.494] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 153.494] (II) Using input driver 'evdev' for 'Power Button'
    [ 153.494] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 153.494] (**) Power Button: always reports core events
    [ 153.494] (**) Power Button: Device: "/dev/input/event4"
    [ 153.494] (--) Power Button: Found keys
    [ 153.494] (II) Power Button: Configuring as keyboard
    [ 153.494] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 153.494] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
    [ 153.494] (**) Option "xkb_rules" "evdev"
    [ 153.494] (**) Option "xkb_model" "evdev"
    [ 153.494] (**) Option "xkb_layout" "us"
    [ 153.501] (II) config/udev: Adding input device Dell Dell USB Keyboard Hub (/dev/input/event1)
    [ 153.501] (**) Dell Dell USB Keyboard Hub: Applying InputClass "evdev keyboard catchall"
    [ 153.501] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard Hub'
    [ 153.501] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 153.502] (**) Dell Dell USB Keyboard Hub: always reports core events
    [ 153.502] (**) Dell Dell USB Keyboard Hub: Device: "/dev/input/event1"
    [ 153.502] (--) Dell Dell USB Keyboard Hub: Found keys
    [ 153.502] (II) Dell Dell USB Keyboard Hub: Configuring as keyboard
    [ 153.502] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.0/input/input1/event1"
    [ 153.502] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard Hub" (type: KEYBOARD)
    [ 153.502] (**) Option "xkb_rules" "evdev"
    [ 153.502] (**) Option "xkb_model" "evdev"
    [ 153.502] (**) Option "xkb_layout" "us"
    [ 153.504] (II) config/udev: Adding input device Dell Dell USB Keyboard Hub (/dev/input/event2)
    [ 153.504] (**) Dell Dell USB Keyboard Hub: Applying InputClass "evdev keyboard catchall"
    [ 153.504] (II) Using input driver 'evdev' for 'Dell Dell USB Keyboard Hub'
    [ 153.504] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 153.504] (**) Dell Dell USB Keyboard Hub: always reports core events
    [ 153.504] (**) Dell Dell USB Keyboard Hub: Device: "/dev/input/event2"
    [ 153.504] (--) Dell Dell USB Keyboard Hub: Found absolute axes
    [ 153.504] (--) Dell Dell USB Keyboard Hub: Found keys
    [ 153.504] (II) Dell Dell USB Keyboard Hub: Configuring as mouse
    [ 153.504] (II) Dell Dell USB Keyboard Hub: Configuring as keyboard
    [ 153.504] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1.1/3-1.1:1.1/input/input2/event2"
    [ 153.504] (II) XINPUT: Adding extended input device "Dell Dell USB Keyboard Hub" (type: KEYBOARD)
    [ 153.504] (**) Option "xkb_rules" "evdev"
    [ 153.504] (**) Option "xkb_model" "evdev"
    [ 153.504] (**) Option "xkb_layout" "us"
    [ 153.505] (II) Dell Dell USB Keyboard Hub: initialized for absolute axes.
    [ 153.505] (**) Dell Dell USB Keyboard Hub: (accel) keeping acceleration scheme 1
    [ 153.505] (**) Dell Dell USB Keyboard Hub: (accel) acceleration profile 0
    [ 153.505] (**) Dell Dell USB Keyboard Hub: (accel) acceleration factor: 2.000
    [ 153.505] (**) Dell Dell USB Keyboard Hub: (accel) acceleration threshold: 4
    [ 153.507] (II) config/udev: Adding input device Kensington Kensington USB/PS2 Wheel Mouse (/dev/input/event0)
    [ 153.507] (**) Kensington Kensington USB/PS2 Wheel Mouse: Applying InputClass "evdev pointer catchall"
    [ 153.507] (II) Using input driver 'evdev' for 'Kensington Kensington USB/PS2 Wheel Mouse'
    [ 153.507] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 153.507] (**) Kensington Kensington USB/PS2 Wheel Mouse: always reports core events
    [ 153.507] (**) Kensington Kensington USB/PS2 Wheel Mouse: Device: "/dev/input/event0"
    [ 153.507] (--) Kensington Kensington USB/PS2 Wheel Mouse: Found 3 mouse buttons
    [ 153.507] (--) Kensington Kensington USB/PS2 Wheel Mouse: Found scroll wheel(s)
    [ 153.507] (--) Kensington Kensington USB/PS2 Wheel Mouse: Found relative axes
    [ 153.507] (--) Kensington Kensington USB/PS2 Wheel Mouse: Found x and y relative axes
    [ 153.507] (II) Kensington Kensington USB/PS2 Wheel Mouse: Configuring as mouse
    [ 153.507] (II) Kensington Kensington USB/PS2 Wheel Mouse: Adding scrollwheel support
    [ 153.507] (**) Kensington Kensington USB/PS2 Wheel Mouse: YAxisMapping: buttons 4 and 5
    [ 153.508] (**) Kensington Kensington USB/PS2 Wheel Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 153.508] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.1/usb3/3-2/3-2:1.0/input/input0/event0"
    [ 153.508] (II) XINPUT: Adding extended input device "Kensington Kensington USB/PS2 Wheel Mouse" (type: MOUSE)
    [ 153.508] (II) Kensington Kensington USB/PS2 Wheel Mouse: initialized for relative axes.
    [ 153.508] (**) Kensington Kensington USB/PS2 Wheel Mouse: (accel) keeping acceleration scheme 1
    [ 153.508] (**) Kensington Kensington USB/PS2 Wheel Mouse: (accel) acceleration profile 0
    [ 153.508] (**) Kensington Kensington USB/PS2 Wheel Mouse: (accel) acceleration factor: 2.000
    [ 153.508] (**) Kensington Kensington USB/PS2 Wheel Mouse: (accel) acceleration threshold: 4
    [ 153.509] (II) config/udev: Adding input device Kensington Kensington USB/PS2 Wheel Mouse (/dev/input/mouse0)
    [ 153.509] (II) No input driver/identifier specified (ignoring)
    [ 153.523] (II) config/udev: Adding input device PC Speaker (/dev/input/event3)
    [ 153.523] (II) No input driver/identifier specified (ignoring)
    Karol wrote:
    aa_movingtarget, please edit your post.
    When pasting code, please use [ code ] tags https://bbs.archlinux.org/help.php#bbcode
    It makes the code more readable and more convenient to scroll through.
    Thanks for the tip!
    Last edited by aa_movingtarget (2011-10-02 19:51:04)

  • [SOLVED] Custom kernel & nvidia

    Hello.
    So i wanted to learn about kernel building for a while and finally decided to jump in. (also i am a new Archlinux user)
    I read the wiki and wanted to try the "traditional" way first so i grabbed the 3.10.0 vanilla tarball and thanks to the wiki, successully compiled and booted it. (i didn't bother trying to start X at this point).
    Then i wanted to use the Arch "abs" way because i wanted to build my custom kernel from the same Arch stable kernel sources (nothing in the 3.10 gives me a boner and the stable arch sources are enough "bleeding edge" for me).
    I followed the wiki procedure and built my linux-3.9.9-1-custom.tar.xz package, then i installed it without any issue. Finally i updated GRUB2 and booted this kernel to make sure it was working.
    Well, it was.
    At this point i knew i had to build a custom nvidia package to make X working so i followed the wiki procedure to build it.
    Here is my PKGBUILD:
    # $Id: PKGBUILD 189199 2013-06-29 10:08:46Z foutrelis $
    # Maintainer : Thomas Baechler <[email protected]>
    pkgname=nvidia-custom
    pkgver=319.32
    _extramodules=extramodules-3.9-custom
    pkgrel=2
    pkgdesc="NVIDIA drivers for linux"
    arch=('i686' 'x86_64')
    url="http://www.nvidia.com/"
    depends=('linux>=3.9' 'linux<3.10' "nvidia-libgl" "nvidia-utils=${pkgver}")
    makedepends=('linux-headers>=3.9' 'linux-headers<3.10')
    conflicts=('nvidia-96xx' 'nvidia-173xx')
    license=('custom')
    install=nvidia.install
    options=(!strip)
    if [ "$CARCH" = "i686" ]; then
    _arch='x86'
    _pkg="NVIDIA-Linux-${_arch}-${pkgver}"
    source=("ftp://download.nvidia.com/XFree86/Linux-${_arch}/${pkgver}/${_pkg}.run")
    md5sums=('978339ff37c3207f3a39d3952721dcdb')
    elif [ "$CARCH" = "x86_64" ]; then
    _arch='x86_64'
    _pkg="NVIDIA-Linux-${_arch}-${pkgver}-no-compat32"
    source=("ftp://download.nvidia.com/XFree86/Linux-${_arch}/${pkgver}/${_pkg}.run")
    md5sums=('d181d856768868823df3bda4607a5315')
    fi
    build() {
    _kernver="$(cat /usr/lib/modules/${_extramodules}/version)"
    echo $_kernver
    cd "${srcdir}"
    sh "${_pkg}.run" --extract-only
    cd "${_pkg}/kernel"
    make SYSSRC=/usr/lib/modules/"${_kernver}/build" module
    package() {
    install -D -m644 "${srcdir}/${_pkg}/kernel/nvidia.ko" \
    "${pkgdir}/usr/lib/modules/${_extramodules}/nvidia.ko"
    install -d -m755 "${pkgdir}/usr/lib/modprobe.d"
    #echo "blacklist nouveau" >> "${pkgdir}/usr/lib/modprobe.d/nvidia.conf"
    sed -i -e "s/EXTRAMODULES='.*'/EXTRAMODULES='${_extramodules}'/" "${startdir}/nvidia.install"
    gzip "${pkgdir}/usr/lib/modules/${_extramodules}/nvidia.ko"
    However when i tried to run makepkg, i got the following error:
    If you are using a Linux 2.4 kernel, please make sure
    you either have configured kernel sources matching your
    kernel or the correct set of kernel headers installed
    on your system.
    If you are using a Linux 2.6 kernel, please make sure
    you have configured kernel sources matching your kernel
    installed on your system. If you specified a separate
    output directory using either the "KBUILD_OUTPUT" or
    the "O" KBUILD parameter, make sure to specify this
    directory with the SYSOUT environment variable or with
    the equivalent nvidia-installer command line option.
    Depending on where and how the kernel sources (or the
    kernel headers) were installed, you may need to specify
    their location with the SYSSRC environment variable or
    the equivalent nvidia-installer command line option.
    *** Unable to determine the target kernel version. ***
    After messing around for quite some time, i discovered nvidia was expecting stuff in the follwing directory:
    /usr/lib/modules/3.9.9-1-custom/build/
    But the build dir did not exist. I looked into the 3.9.9-1-ARCH and found that the build dir was indeed present in the stock kernel directory.
    Since i was stuck i tried the following:
    ln -s /usr/lib/modules/3.9.9-1-ARCH/build /usr/lib/modules/3.9.9-1-custom/build
    and ran makepkg again: it built the package with no issue, so I installed the package.
    I rebooted my machine thinking this ugly hack solved my problem.
    I was wrong...
    When i tried to start X i got this error (using the custom kernel):
    modprobe: ERROR: could not insert 'nvidia': Exec format error
    Here's the full output:
    X.Org X Server 1.14.2
    Release Date: 2013-06-25
    X Protocol Version 11, Revision 0
    Build Operating System: Linux 3.9.7-1-ARCH x86_64
    Current Operating System: Linux msytux666 3.9.9-1-custom #2 SMP PREEMPT Sat Jul 6 21:52:16 CEST 2013 x86_64
    Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux-custom root=UUID=a6b3e912-4bd4-47dc-810e-4d69667b21f9 ro quiet
    Build Date: 01 July 2013 10:48:42AM
    Current version of pixman: 0.30.0
    Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jul 6 23:02:47 2013
    (==) Using config file: "/etc/X11/xorg.conf"
    (==) Using config directory: "/etc/X11/xorg.conf.d"
    Initializing built-in extension Generic Event Extension
    Initializing built-in extension SHAPE
    Initializing built-in extension MIT-SHM
    Initializing built-in extension XInputExtension
    Initializing built-in extension XTEST
    Initializing built-in extension BIG-REQUESTS
    Initializing built-in extension SYNC
    Initializing built-in extension XKEYBOARD
    Initializing built-in extension XC-MISC
    Initializing built-in extension SECURITY
    Initializing built-in extension XINERAMA
    Initializing built-in extension XFIXES
    Initializing built-in extension RENDER
    Initializing built-in extension RANDR
    Initializing built-in extension COMPOSITE
    Initializing built-in extension DAMAGE
    Initializing built-in extension MIT-SCREEN-SAVER
    Initializing built-in extension DOUBLE-BUFFER
    Initializing built-in extension RECORD
    nitializing built-in extension DPMS
    Initializing built-in extension X-Resource
    Initializing built-in extension XVideo
    Initializing built-in extension XVideo-MotionCompensation
    Initializing built-in extension XFree86-VidModeExtension
    Initializing built-in extension XFree86-DGA
    Initializing built-in extension XFree86-DRI
    Initializing built-in extension DRI2
    Loading extension GLX
    modprobe: ERROR: could not insert 'nvidia': Exec format error
    (EE)
    Fatal server error:
    (EE) no screens found(EE)
    (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    (EE)
    (EE) Server terminated with error (1). Closing log file.
    xinit: giving up
    xinit: unable to connect to X server: Connection refused
    xinit: server error
    Not sure what to do next.
    Thank you for reading
    PS: my stock kernel is still fine and running X with no issue (did not break anything, that's one good thing at least!)
    Last edited by BGK (2013-07-06 23:12:54)

    Did you install the kernel headers when you build the custom package?  You need something to build against, and that /usr/modules/3.9.9-1-ARCH/build is a symlink that is owned by linux-headers.  It points to /usr/src/linux-3.9.9-1-ARCH.  So by symlinking that "build" from ARCH to custom, you are effectively building the module against the wrong headers. 
    Check to make sure that you have installed the headers as well as the kernel.  The PKGBUILD for linux will build multiple packages (linux, linux-headers, and linux-docs).  I like to have all three, since the docs package contains some amazing information and is totally worth the ~16MB of space.  Do you have a directory set for storing built packages?  It is probably a good idea, so that you can keep them around.
    BTW, installing headers using the "traditional method" would include issuing the "make headers-install" command as root (from the source directory of course).  Did you do that?
    Last edited by WonderWoofy (2013-07-06 22:49:30)

  • [SOLVED]libgl and nvidia-173xx-utils conflicts

    sudo pacman -Syu
    :: Синхронизируются базы данных пакетов...
    core up to date
    extra up to date
    community up to date
    archlinuxfr up to date
    :: System full update...
    Dependencies...
    проверка на взаимную несовместимость...
    :: libgl и nvidia-173xx-utils conflicts. Delete nvidia-173xx-utils? [y/N] n
    error: обнаружен неразрешимый конфликт пакетов
    error: не удалось подготовить запрос (конфликтующие зависимости)
    :: libgl and nvidia-173xx-utils conflicts
    (Sorry, original log is on russian, but I translated main words)
    But!
    pacman -Rns libgl
    error: 'libgl': not found
    How to fix it?
    Last edited by Dr.X (2010-11-10 18:41:30)

    Solved the problem is very simple - removing the nouveau. I have it was because I was in one blog/forum read that no problem with containing both nvidia and nouveau, but that one of them will be in Blacklist. But he interrupted me to upgrade. But the strangest thing - when I last updated, they do not conflict, but now whoop.
    Thanks TigTex and wonder for your help!

  • [Solved] Graphics driver (nVidia) problem on fresh Arch setup

    Hi,
    I have installed Arch as main OS about 2 days ago following usual installation wikis. PC is fully functional except for problems with graphics driver (nVidia 340xx) for example just now it took about 3 to 4 boots to get into desktop like 1st boot: did not show sddm, 2nd boot: showed it with colored (white/red/green/blue) pixels, 3rd boot: broken desktop and 4th boot: finally working (see two screen images taken from mobile at the bottom).
    Details are as follows:
    1. Kernel:
    Linux archos 3.18.6-1-ARCH x86_64 GNU/Linux
    2. System info:
    Cinnamon desktop 2.4.6
    AMD Athlon 62 x2 4800+ processor
    RAM 3 GB
    nVidia GT218 (GeForce 210) graphics card
    3. nVidia packages installed:
    From official repos:
    local/nvidia-340xx 340.76-2
    local/nvidia-340xx-libgl 340.76-2
    local/nvidia-340xx-utils 340.76-2
    local/opencl-nvidia-340xx 340.76-2
    4. lspci | grep VGA
    01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2)
    5. journalctl -p 0..3 -xn
    Mar 13 12:24:01 archos kernel: NVRM: Xid (PCI:0000:01:00): 6, PE0005
    Mar 13 12:24:19 archos kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ChID 0005, Class 00008597, Offset 00001458, Data 00000006
    Mar 13 12:24:19 archos kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ChID 0005, Class 00008597, Offset 00001644, Data 00000000
    Mar 13 12:24:25 archos kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ChID 0005, Class 00008597, Offset 00001644, Data 00000000
    Mar 13 12:24:31 archos kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ChID 0005, Class 00008597, Offset 00001644, Data 00000000
    Mar 13 12:24:37 archos kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ChID 0005, Class 00008597, Offset 00001644, Data 00000000
    Mar 13 12:24:43 archos kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ChID 0005, Class 00008597, Offset 00001458, Data 00000006
    Mar 13 12:24:43 archos kernel: NVRM: Xid (PCI:0000:01:00): 13, Graphics Exception: ChID 0005, Class 00008597, Offset 00001644, Data 00000000
    Mar 13 12:24:48 archos pulseaudio[405]: [pulseaudio] bluez5-util.c: GetManagedObjects() failed: org.freedesktop.DBus.Error.ServiceUnknown: The name or
    Mar 13 12:24:49 archos pulseaudio[460]: [pulseaudio] pid.c: Daemon already running.
    6. journalctl -b|grep -i -e vesa -e vga
    Mar 13 12:23:03 archos kernel: vgaarb: setting as boot device: PCI:0000:01:00.0
    Mar 13 12:23:03 archos kernel: vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=io+mem,locks=none
    Mar 13 12:23:03 archos kernel: vgaarb: loaded
    Mar 13 12:23:03 archos kernel: vgaarb: bridge control possible 0000:01:00.0
    Mar 13 12:23:03 archos kernel: vesafb: mode is 640x480x32, linelength=2560, pages=0
    Mar 13 12:23:03 archos kernel: vesafb: scrolling: redraw
    Mar 13 12:23:03 archos kernel: vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
    Mar 13 12:23:03 archos kernel: vesafb: framebuffer at 0xcf000000, mapped to 0xffffc90010780000, using 1216k, total 1216k
    Mar 13 12:23:03 archos kernel: fb0: VESA VGA frame buffer device
    Mar 13 12:23:06 archos kernel: vgaarb: device changed decodes: PCI:0000:01:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
    Mar 13 12:23:06 archos kernel: snd_hda_intel 0000:01:00.1: Handle VGA-switcheroo audio client
    Mar 13 12:23:13 archos kernel: NVRM: Your system is not currently configured to drive a VGA console
    Mar 13 12:23:13 archos kernel: NVRM: on the primary VGA device. The NVIDIA Linux graphics driver
    Mar 13 12:23:13 archos kernel: NVRM: requires the use of a text-mode VGA console. Use of other console
    Mar 13 12:23:13 archos kernel: NVRM: drivers including, but not limited to, vesafb, may result in
    7. glxinfo
    name of display: :0
    display: :0 screen: 0
    direct rendering: Yes
    server glx vendor string: NVIDIA Corporation
    server glx version string: 1.4
    server glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile,
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float,
    GLX_ARB_multisample, GLX_EXT_buffer_age,
    GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile,
    GLX_EXT_framebuffer_sRGB, GLX_EXT_stereo_tree, GLX_EXT_swap_control,
    GLX_EXT_swap_control_tear, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_NV_delay_before_swap,
    GLX_NV_float_buffer, GLX_NV_multisample_coverage, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGI_swap_control, GLX_SGI_video_sync
    client glx vendor string: NVIDIA Corporation
    client glx version string: 1.4
    client glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile,
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_buffer_age,
    GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile,
    GLX_EXT_fbconfig_packed_float, GLX_EXT_framebuffer_sRGB,
    GLX_EXT_import_context, GLX_EXT_stereo_tree, GLX_EXT_swap_control,
    GLX_EXT_swap_control_tear, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_NV_copy_image,
    GLX_NV_delay_before_swap, GLX_NV_float_buffer,
    GLX_NV_multisample_coverage, GLX_NV_present_video, GLX_NV_swap_group,
    GLX_NV_video_capture, GLX_NV_video_out, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGI_swap_control, GLX_SGI_video_sync
    GLX version: 1.4
    GLX extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile,
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_buffer_age,
    GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile,
    GLX_EXT_framebuffer_sRGB, GLX_EXT_stereo_tree, GLX_EXT_swap_control,
    GLX_EXT_swap_control_tear, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_NV_delay_before_swap,
    GLX_NV_float_buffer, GLX_NV_multisample_coverage, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGI_swap_control, GLX_SGI_video_sync
    OpenGL vendor string: NVIDIA Corporation
    OpenGL renderer string: GeForce 210/PCIe/SSE2
    OpenGL core profile version string: 3.3.0 NVIDIA 340.76
    OpenGL core profile shading language version string: 3.30 NVIDIA via Cg compiler
    OpenGL core profile context flags: (none)
    OpenGL core profile profile mask: core profile
    OpenGL core profile extensions:
    GL_ARB_ES2_compatibility, GL_ARB_ES3_compatibility,
    GL_ARB_arrays_of_arrays, GL_ARB_base_instance, GL_ARB_blend_func_extended,
    GL_ARB_clear_buffer_object, GL_ARB_color_buffer_float,
    GL_ARB_compressed_texture_pixel_storage, GL_ARB_conservative_depth,
    GL_ARB_copy_buffer, GL_ARB_copy_image, GL_ARB_debug_output,
    GL_ARB_depth_buffer_float, GL_ARB_depth_clamp, GL_ARB_depth_texture,
    GL_ARB_draw_buffers, GL_ARB_draw_buffers_blend,
    GL_ARB_draw_elements_base_vertex, GL_ARB_draw_instanced,
    GL_ARB_enhanced_layouts, GL_ARB_explicit_attrib_location,
    GL_ARB_explicit_uniform_location, GL_ARB_fragment_coord_conventions,
    GL_ARB_fragment_layer_viewport, GL_ARB_fragment_program,
    GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
    GL_ARB_framebuffer_no_attachments, GL_ARB_framebuffer_object,
    GL_ARB_framebuffer_sRGB, GL_ARB_geometry_shader4,
    GL_ARB_get_program_binary, GL_ARB_half_float_pixel,
    GL_ARB_half_float_vertex, GL_ARB_imaging, GL_ARB_instanced_arrays,
    GL_ARB_internalformat_query, GL_ARB_internalformat_query2,
    GL_ARB_invalidate_subdata, GL_ARB_map_buffer_alignment,
    GL_ARB_map_buffer_range, GL_ARB_multi_bind, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_occlusion_query2,
    GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite,
    GL_ARB_program_interface_query, GL_ARB_provoking_vertex,
    GL_ARB_robust_buffer_access_behavior, GL_ARB_robustness,
    GL_ARB_sample_shading, GL_ARB_sampler_objects, GL_ARB_seamless_cube_map,
    GL_ARB_separate_shader_objects, GL_ARB_shader_bit_encoding,
    GL_ARB_shader_objects, GL_ARB_shader_texture_lod,
    GL_ARB_shading_language_100, GL_ARB_shading_language_420pack,
    GL_ARB_shading_language_include, GL_ARB_shading_language_packing,
    GL_ARB_shadow, GL_ARB_stencil_texturing, GL_ARB_sync,
    GL_ARB_texture_border_clamp, GL_ARB_texture_buffer_object,
    GL_ARB_texture_buffer_range, GL_ARB_texture_compression,
    GL_ARB_texture_compression_rgtc, GL_ARB_texture_cube_map,
    GL_ARB_texture_cube_map_array, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_float, GL_ARB_texture_gather,
    GL_ARB_texture_mirror_clamp_to_edge, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_multisample, GL_ARB_texture_non_power_of_two,
    GL_ARB_texture_query_levels, GL_ARB_texture_query_lod,
    GL_ARB_texture_rectangle, GL_ARB_texture_rg, GL_ARB_texture_rgb10_a2ui,
    GL_ARB_texture_stencil8, GL_ARB_texture_storage,
    GL_ARB_texture_storage_multisample, GL_ARB_texture_swizzle,
    GL_ARB_texture_view, GL_ARB_timer_query, GL_ARB_transform_feedback2,
    GL_ARB_transform_feedback_instanced, GL_ARB_transpose_matrix,
    GL_ARB_uniform_buffer_object, GL_ARB_vertex_array_bgra,
    GL_ARB_vertex_array_object, GL_ARB_vertex_attrib_binding,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
    GL_ARB_vertex_type_10f_11f_11f_rev, GL_ARB_vertex_type_2_10_10_10_rev,
    GL_ARB_viewport_array, GL_ARB_window_pos, GL_ATI_draw_buffers,
    GL_ATI_texture_float, GL_ATI_texture_mirror_once,
    GL_EXTX_framebuffer_mixed_formats, GL_EXT_Cg_shader, GL_EXT_abgr,
    GL_EXT_bgra, GL_EXT_bindable_uniform, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array,
    GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
    GL_EXT_draw_buffers2, GL_EXT_draw_instanced, GL_EXT_draw_range_elements,
    GL_EXT_fog_coord, GL_EXT_framebuffer_blit, GL_EXT_framebuffer_multisample,
    GL_EXT_framebuffer_multisample_blit_scaled, GL_EXT_framebuffer_object,
    GL_EXT_framebuffer_sRGB, GL_EXT_geometry_shader4,
    GL_EXT_gpu_program_parameters, GL_EXT_gpu_shader4,
    GL_EXT_import_sync_object, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_depth_stencil, GL_EXT_packed_float, GL_EXT_packed_pixels,
    GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
    GL_EXT_provoking_vertex, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_shader_objects, GL_EXT_separate_specular_color,
    GL_EXT_shader_integer_mix, GL_EXT_shadow_funcs, GL_EXT_stencil_two_side,
    GL_EXT_stencil_wrap, GL_EXT_texture3D, GL_EXT_texture_array,
    GL_EXT_texture_buffer_object, GL_EXT_texture_compression_dxt1,
    GL_EXT_texture_compression_latc, GL_EXT_texture_compression_rgtc,
    GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_filter_anisotropic, GL_EXT_texture_integer,
    GL_EXT_texture_lod, GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_sRGB, GL_EXT_texture_sRGB_decode,
    GL_EXT_texture_shared_exponent, GL_EXT_texture_storage,
    GL_EXT_texture_swizzle, GL_EXT_timer_query, GL_EXT_transform_feedback2,
    GL_EXT_vertex_array, GL_EXT_vertex_array_bgra, GL_EXT_x11_sync_object,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, GL_KHR_debug,
    GL_KTX_buffer_region, GL_NVX_conditional_render, GL_NVX_gpu_memory_info,
    GL_NV_ES1_1_compatibility, GL_NV_blend_square, GL_NV_conditional_render,
    GL_NV_copy_depth_to_color, GL_NV_copy_image, GL_NV_depth_buffer_float,
    GL_NV_depth_clamp, GL_NV_explicit_multisample, GL_NV_fence,
    GL_NV_float_buffer, GL_NV_fog_distance, GL_NV_fragment_program,
    GL_NV_fragment_program2, GL_NV_fragment_program_option,
    GL_NV_framebuffer_multisample_coverage, GL_NV_geometry_shader4,
    GL_NV_gpu_program4, GL_NV_gpu_program4_1, GL_NV_half_float,
    GL_NV_light_max_exponent, GL_NV_multisample_coverage,
    GL_NV_multisample_filter_hint, GL_NV_occlusion_query,
    GL_NV_packed_depth_stencil, GL_NV_parameter_buffer_object,
    GL_NV_parameter_buffer_object2, GL_NV_path_rendering,
    GL_NV_pixel_data_range, GL_NV_point_sprite, GL_NV_primitive_restart,
    GL_NV_register_combiners, GL_NV_register_combiners2,
    GL_NV_shader_buffer_load, GL_NV_texgen_reflection, GL_NV_texture_barrier,
    GL_NV_texture_compression_vtc, GL_NV_texture_env_combine4,
    GL_NV_texture_expand_normal, GL_NV_texture_multisample,
    GL_NV_texture_rectangle, GL_NV_texture_shader, GL_NV_texture_shader2,
    GL_NV_texture_shader3, GL_NV_transform_feedback,
    GL_NV_transform_feedback2, GL_NV_vdpau_interop, GL_NV_vertex_array_range,
    GL_NV_vertex_array_range2, GL_NV_vertex_buffer_unified_memory,
    GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_NV_vertex_program2,
    GL_NV_vertex_program2_option, GL_NV_vertex_program3, GL_S3_s3tc,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
    GL_SGIX_shadow, GL_SUN_slice_accum
    OpenGL version string: 3.3.0 NVIDIA 340.76
    OpenGL shading language version string: 3.30 NVIDIA via Cg compiler
    OpenGL context flags: (none)
    OpenGL profile mask: (none)
    OpenGL extensions:
    GL_ARB_ES2_compatibility, GL_ARB_ES3_compatibility,
    GL_ARB_arrays_of_arrays, GL_ARB_base_instance, GL_ARB_blend_func_extended,
    GL_ARB_clear_buffer_object, GL_ARB_color_buffer_float,
    GL_ARB_compatibility, GL_ARB_compressed_texture_pixel_storage,
    GL_ARB_conservative_depth, GL_ARB_copy_buffer, GL_ARB_copy_image,
    GL_ARB_debug_output, GL_ARB_depth_buffer_float, GL_ARB_depth_clamp,
    GL_ARB_depth_texture, GL_ARB_draw_buffers, GL_ARB_draw_buffers_blend,
    GL_ARB_draw_elements_base_vertex, GL_ARB_draw_instanced,
    GL_ARB_enhanced_layouts, GL_ARB_explicit_attrib_location,
    GL_ARB_explicit_uniform_location, GL_ARB_fragment_coord_conventions,
    GL_ARB_fragment_layer_viewport, GL_ARB_fragment_program,
    GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
    GL_ARB_framebuffer_no_attachments, GL_ARB_framebuffer_object,
    GL_ARB_framebuffer_sRGB, GL_ARB_geometry_shader4,
    GL_ARB_get_program_binary, GL_ARB_half_float_pixel,
    GL_ARB_half_float_vertex, GL_ARB_imaging, GL_ARB_instanced_arrays,
    GL_ARB_internalformat_query, GL_ARB_internalformat_query2,
    GL_ARB_invalidate_subdata, GL_ARB_map_buffer_alignment,
    GL_ARB_map_buffer_range, GL_ARB_multi_bind, GL_ARB_multisample,
    GL_ARB_multitexture, GL_ARB_occlusion_query, GL_ARB_occlusion_query2,
    GL_ARB_pixel_buffer_object, GL_ARB_point_parameters, GL_ARB_point_sprite,
    GL_ARB_program_interface_query, GL_ARB_provoking_vertex,
    GL_ARB_robust_buffer_access_behavior, GL_ARB_robustness,
    GL_ARB_sample_shading, GL_ARB_sampler_objects, GL_ARB_seamless_cube_map,
    GL_ARB_separate_shader_objects, GL_ARB_shader_bit_encoding,
    GL_ARB_shader_objects, GL_ARB_shader_texture_lod,
    GL_ARB_shading_language_100, GL_ARB_shading_language_420pack,
    GL_ARB_shading_language_include, GL_ARB_shading_language_packing,
    GL_ARB_shadow, GL_ARB_stencil_texturing, GL_ARB_sync,
    GL_ARB_texture_border_clamp, GL_ARB_texture_buffer_object,
    GL_ARB_texture_buffer_range, GL_ARB_texture_compression,
    GL_ARB_texture_compression_rgtc, GL_ARB_texture_cube_map,
    GL_ARB_texture_cube_map_array, GL_ARB_texture_env_add,
    GL_ARB_texture_env_combine, GL_ARB_texture_env_crossbar,
    GL_ARB_texture_env_dot3, GL_ARB_texture_float, GL_ARB_texture_gather,
    GL_ARB_texture_mirror_clamp_to_edge, GL_ARB_texture_mirrored_repeat,
    GL_ARB_texture_multisample, GL_ARB_texture_non_power_of_two,
    GL_ARB_texture_query_levels, GL_ARB_texture_query_lod,
    GL_ARB_texture_rectangle, GL_ARB_texture_rg, GL_ARB_texture_rgb10_a2ui,
    GL_ARB_texture_stencil8, GL_ARB_texture_storage,
    GL_ARB_texture_storage_multisample, GL_ARB_texture_swizzle,
    GL_ARB_texture_view, GL_ARB_timer_query, GL_ARB_transform_feedback2,
    GL_ARB_transform_feedback_instanced, GL_ARB_transpose_matrix,
    GL_ARB_uniform_buffer_object, GL_ARB_vertex_array_bgra,
    GL_ARB_vertex_array_object, GL_ARB_vertex_attrib_binding,
    GL_ARB_vertex_buffer_object, GL_ARB_vertex_program, GL_ARB_vertex_shader,
    GL_ARB_vertex_type_10f_11f_11f_rev, GL_ARB_vertex_type_2_10_10_10_rev,
    GL_ARB_viewport_array, GL_ARB_window_pos, GL_ATI_draw_buffers,
    GL_ATI_texture_float, GL_ATI_texture_mirror_once,
    GL_EXTX_framebuffer_mixed_formats, GL_EXT_Cg_shader, GL_EXT_abgr,
    GL_EXT_bgra, GL_EXT_bindable_uniform, GL_EXT_blend_color,
    GL_EXT_blend_equation_separate, GL_EXT_blend_func_separate,
    GL_EXT_blend_minmax, GL_EXT_blend_subtract, GL_EXT_compiled_vertex_array,
    GL_EXT_depth_bounds_test, GL_EXT_direct_state_access,
    GL_EXT_draw_buffers2, GL_EXT_draw_instanced, GL_EXT_draw_range_elements,
    GL_EXT_fog_coord, GL_EXT_framebuffer_blit, GL_EXT_framebuffer_multisample,
    GL_EXT_framebuffer_multisample_blit_scaled, GL_EXT_framebuffer_object,
    GL_EXT_framebuffer_sRGB, GL_EXT_geometry_shader4,
    GL_EXT_gpu_program_parameters, GL_EXT_gpu_shader4,
    GL_EXT_import_sync_object, GL_EXT_multi_draw_arrays,
    GL_EXT_packed_depth_stencil, GL_EXT_packed_float, GL_EXT_packed_pixels,
    GL_EXT_pixel_buffer_object, GL_EXT_point_parameters,
    GL_EXT_provoking_vertex, GL_EXT_rescale_normal, GL_EXT_secondary_color,
    GL_EXT_separate_shader_objects, GL_EXT_separate_specular_color,
    GL_EXT_shader_integer_mix, GL_EXT_shadow_funcs, GL_EXT_stencil_two_side,
    GL_EXT_stencil_wrap, GL_EXT_texture3D, GL_EXT_texture_array,
    GL_EXT_texture_buffer_object, GL_EXT_texture_compression_dxt1,
    GL_EXT_texture_compression_latc, GL_EXT_texture_compression_rgtc,
    GL_EXT_texture_compression_s3tc, GL_EXT_texture_cube_map,
    GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
    GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
    GL_EXT_texture_filter_anisotropic, GL_EXT_texture_integer,
    GL_EXT_texture_lod, GL_EXT_texture_lod_bias, GL_EXT_texture_mirror_clamp,
    GL_EXT_texture_object, GL_EXT_texture_sRGB, GL_EXT_texture_sRGB_decode,
    GL_EXT_texture_shared_exponent, GL_EXT_texture_storage,
    GL_EXT_texture_swizzle, GL_EXT_timer_query, GL_EXT_transform_feedback2,
    GL_EXT_vertex_array, GL_EXT_vertex_array_bgra, GL_EXT_x11_sync_object,
    GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat, GL_KHR_debug,
    GL_KTX_buffer_region, GL_NVX_conditional_render, GL_NVX_gpu_memory_info,
    GL_NV_ES1_1_compatibility, GL_NV_blend_square, GL_NV_conditional_render,
    GL_NV_copy_depth_to_color, GL_NV_copy_image, GL_NV_depth_buffer_float,
    GL_NV_depth_clamp, GL_NV_explicit_multisample, GL_NV_fence,
    GL_NV_float_buffer, GL_NV_fog_distance, GL_NV_fragment_program,
    GL_NV_fragment_program2, GL_NV_fragment_program_option,
    GL_NV_framebuffer_multisample_coverage, GL_NV_geometry_shader4,
    GL_NV_gpu_program4, GL_NV_gpu_program4_1, GL_NV_half_float,
    GL_NV_light_max_exponent, GL_NV_multisample_coverage,
    GL_NV_multisample_filter_hint, GL_NV_occlusion_query,
    GL_NV_packed_depth_stencil, GL_NV_parameter_buffer_object,
    GL_NV_parameter_buffer_object2, GL_NV_path_rendering,
    GL_NV_pixel_data_range, GL_NV_point_sprite, GL_NV_primitive_restart,
    GL_NV_register_combiners, GL_NV_register_combiners2,
    GL_NV_shader_buffer_load, GL_NV_texgen_reflection, GL_NV_texture_barrier,
    GL_NV_texture_compression_vtc, GL_NV_texture_env_combine4,
    GL_NV_texture_expand_normal, GL_NV_texture_multisample,
    GL_NV_texture_rectangle, GL_NV_texture_shader, GL_NV_texture_shader2,
    GL_NV_texture_shader3, GL_NV_transform_feedback,
    GL_NV_transform_feedback2, GL_NV_vdpau_interop, GL_NV_vertex_array_range,
    GL_NV_vertex_array_range2, GL_NV_vertex_buffer_unified_memory,
    GL_NV_vertex_program, GL_NV_vertex_program1_1, GL_NV_vertex_program2,
    GL_NV_vertex_program2_option, GL_NV_vertex_program3, GL_S3_s3tc,
    GL_SGIS_generate_mipmap, GL_SGIS_texture_lod, GL_SGIX_depth_texture,
    GL_SGIX_shadow, GL_SUN_slice_accum
    OpenGL ES profile version string: OpenGL ES 2.0 NVIDIA 340.76 340.76
    OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.00
    OpenGL ES profile extensions:
    GL_EXT_blend_minmax, GL_EXT_color_buffer_half_float, GL_EXT_debug_label,
    GL_EXT_frag_depth, GL_EXT_map_buffer_range,
    GL_EXT_occlusion_query_boolean, GL_EXT_robustness, GL_EXT_sRGB,
    GL_EXT_sRGB_write_control, GL_EXT_separate_shader_objects,
    GL_EXT_shader_integer_mix, GL_EXT_shadow_samplers,
    GL_EXT_texture_compression_dxt1, GL_EXT_texture_compression_s3tc,
    GL_EXT_texture_filter_anisotropic, GL_EXT_texture_format_BGRA8888,
    GL_EXT_texture_rg, GL_EXT_texture_sRGB_decode, GL_EXT_texture_storage,
    GL_EXT_unpack_subimage, GL_KHR_debug, GL_NV_bgr, GL_NV_copy_buffer,
    GL_NV_copy_image, GL_NV_draw_buffers, GL_NV_draw_instanced,
    GL_NV_explicit_attrib_location, GL_NV_fbo_color_attachments,
    GL_NV_framebuffer_blit, GL_NV_framebuffer_multisample,
    GL_NV_generate_mipmap_sRGB, GL_NV_instanced_arrays,
    GL_NV_non_square_matrices, GL_NV_occlusion_query_samples,
    GL_NV_pack_subimage, GL_NV_packed_float, GL_NV_packed_float_linear,
    GL_NV_pixel_buffer_object, GL_NV_read_buffer, GL_NV_read_depth,
    GL_NV_read_depth_stencil, GL_NV_read_stencil, GL_NV_sRGB_formats,
    GL_NV_shadow_samplers_array, GL_NV_shadow_samplers_cube,
    GL_NV_texture_array, GL_NV_texture_border_clamp,
    GL_NV_texture_compression_latc, GL_NV_texture_compression_s3tc,
    GL_NV_texture_compression_s3tc_update, GL_NV_timer_query,
    GL_OES_compressed_ETC1_RGB8_texture, GL_OES_depth24, GL_OES_depth32,
    GL_OES_depth_texture, GL_OES_depth_texture_cube_map,
    GL_OES_element_index_uint, GL_OES_fbo_render_mipmap,
    GL_OES_get_program_binary, GL_OES_mapbuffer, GL_OES_packed_depth_stencil,
    GL_OES_rgb8_rgba8, GL_OES_standard_derivatives, GL_OES_texture_half_float,
    GL_OES_texture_half_float_linear, GL_OES_texture_npot,
    GL_OES_vertex_array_object, GL_OES_vertex_half_float
    204 GLX Visuals
    visual x bf lv rg d st colorbuffer sr ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a F gb bf th cl r g b a ns b eat
    0x021 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x022 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x024 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x025 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x026 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x027 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x028 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x029 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x02a 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x02b 24 tc 0 24 0 r y . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x02c 24 tc 0 32 0 r y . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x02d 24 tc 0 24 0 r . . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x02e 24 tc 0 32 0 r . . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x02f 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x030 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x031 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x032 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x033 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x034 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x035 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x036 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x037 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x038 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x039 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x03a 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x03b 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x03c 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x03d 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x03e 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x03f 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x040 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x041 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x042 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x043 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x044 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x045 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x046 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x047 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x048 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x049 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x04a 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x04b 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x04c 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x04d 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x04e 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x04f 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x050 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x051 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x052 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x053 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x054 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x055 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x056 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x057 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x058 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x059 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x05a 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x05b 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x05c 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x05d 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x05e 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x05f 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x060 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x061 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x062 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x063 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x064 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x065 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x066 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x067 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x068 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x069 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x06a 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x06b 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x06c 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x06d 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x06e 24 dc 0 24 0 r y . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x06f 24 dc 0 32 0 r y . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x070 24 dc 0 24 0 r . . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x071 24 dc 0 32 0 r . . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x072 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x073 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x074 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x075 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x076 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x077 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x078 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x079 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x07a 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x07b 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x07c 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x07d 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x07e 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x07f 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x080 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x081 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x082 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x083 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x084 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x085 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x086 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x087 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x088 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x089 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x08a 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x08b 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x08c 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x08d 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x08e 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x08f 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x090 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x091 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x092 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x093 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x094 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x095 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x096 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x097 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x098 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x099 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x09a 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x09b 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x09c 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x09d 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x09e 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x09f 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0a0 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0a1 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0a2 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0a3 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0a4 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0a5 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0a6 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0a7 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0a8 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0a9 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x023 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x0aa 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x0ab 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x0ac 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x0ad 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x0ae 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x0af 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x0b0 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x0b1 32 tc 0 24 0 r y . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x0b2 32 tc 0 32 0 r y . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x0b3 32 tc 0 24 0 r . . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x0b4 32 tc 0 32 0 r . . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x0b5 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x0b6 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x0b7 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x0b8 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x0b9 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x0ba 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x0bb 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x0bc 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x0bd 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x0be 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x0bf 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x0c0 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x0c1 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x0c2 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x0c3 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x0c4 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x0c5 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x0c6 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x0c7 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0c8 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0c9 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x0ca 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x0cb 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0cc 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0cd 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0ce 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0cf 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0d0 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0d1 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0d2 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0d3 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0d4 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0d5 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x0d6 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x0d7 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0d8 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0d9 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0da 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0db 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x0dc 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x0dd 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0de 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0df 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0e0 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x0e1 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0e2 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0e3 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0e4 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0e5 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0e6 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0e7 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0e8 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x0e9 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0ea 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0eb 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x0ec 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    287 GLXFBConfigs:
    visual x bf lv rg d st colorbuffer sr ax dp st accumbuffer ms cav
    id dep cl sp sz l ci b ro r g b a F gb bf th cl r g b a ns b eat
    0x0ed 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x0ee 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x0ef 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x0f0 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x0f1 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x0f2 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x0f3 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x0f4 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x0f5 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x0f6 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x0f7 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x0f8 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x0f9 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x0fa 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x0fb 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x0fc 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x0fd 24 tc 0 24 0 r y . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x0fe 24 dc 0 24 0 r y . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x0ff 24 tc 0 32 0 r y . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x100 24 dc 0 32 0 r y . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x101 24 tc 0 24 0 r . . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x102 24 dc 0 24 0 r . . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x103 24 tc 0 32 0 r . . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x104 24 dc 0 32 0 r . . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x105 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x106 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x107 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x108 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x109 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x10a 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x10b 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x10c 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x10d 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x10e 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x10f 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x110 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x111 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x112 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x113 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x114 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x115 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x116 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x117 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x118 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x119 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x11a 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x11b 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x11c 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x11d 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x11e 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x11f 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x120 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x121 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x122 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x123 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x124 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x125 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x126 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x127 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x128 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x129 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x12a 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x12b 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x12c 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x12d 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x12e 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x12f 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x130 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x131 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x132 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x133 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x134 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x135 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x136 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x137 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x138 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x139 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x13a 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x13b 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x13c 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x13d 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x13e 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x13f 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x140 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x141 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x142 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x143 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x144 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x145 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x146 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x147 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x148 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x149 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x14a 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x14b 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x14c 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x14d 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x14e 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x14f 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x150 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x151 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x152 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x153 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x154 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x155 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x156 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x157 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x158 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x159 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x15a 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x15b 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x15c 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x15d 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x15e 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x15f 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x160 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x161 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x162 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x163 24 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x164 24 dc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x165 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x166 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x167 24 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x168 24 dc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x169 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x16a 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x16b 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x16c 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x16d 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x16e 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x16f 24 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x170 24 dc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x171 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x172 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x173 24 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x174 24 dc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x175 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x176 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x177 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 0 0 None
    0x178 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 0 0 None
    0x179 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x17a 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x17b 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 0 0 None
    0x17c 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 0 0 None
    0x17d 32 tc 0 24 0 r y . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x17e 32 tc 0 32 0 r y . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x17f 32 tc 0 24 0 r . . 8 8 8 0 . s 4 0 0 16 16 16 16 0 0 None
    0x180 32 tc 0 32 0 r . . 8 8 8 8 . s 4 0 0 16 16 16 16 0 0 None
    0x181 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x182 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x183 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x184 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x185 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x186 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 2 1 Ncon
    0x187 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x188 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 4 1 Ncon
    0x189 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x18a 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x18b 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x18c 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x18d 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x18e 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 2 1 Ncon
    0x18f 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x190 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 4 1 Ncon
    0x191 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x192 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x193 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x194 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x195 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x196 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x197 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x198 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x199 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x19a 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x19b 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x19c 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x19d 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x19e 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x19f 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1a0 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1a1 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x1a2 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x1a3 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x1a4 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x1a5 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x1a6 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x1a7 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x1a8 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 8 1 Ncon
    0x1a9 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x1aa 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x1ab 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x1ac 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 0 16 16 16 16 16 1 Ncon
    0x1ad 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x1ae 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x1af 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1b0 32 tc 0 24 0 r y . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1b1 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1b2 32 tc 0 32 0 r y . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1b3 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x1b4 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 8 1 Ncon
    0x1b5 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1b6 32 tc 0 24 0 r . . 8 8 8 0 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1b7 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1b8 32 tc 0 32 0 r . . 8 8 8 8 . s 4 24 8 16 16 16 16 16 1 Ncon
    0x1b9 0 sg 0 16 0 r y . 5 6 5 0 . . 4 16 0 16 16 16 16 0 0 None
    0x1ba 0 sg 0 16 0 r . . 5 6 5 0 . . 4 16 0 16 16 16 16 0 0 None
    0x1bb 0 sg 0 16 0 r y . 5 6 5 0 . . 4 24 0 16 16 16 16 0 0 None
    0x1bc 0 sg 0 16 0 r . . 5 6 5 0 . . 4 24 0 16 16 16 16 0 0 None
    0x1bd 0 sg 0 16 0 r y . 5 6 5 0 . . 4 24 8 16 16 16 16 0 0 None
    0x1be 0 sg 0 16 0 r . . 5 6 5 0 . . 4 24 8 16 16 16 16 0 0 None
    0x1bf 0 sg 0 16 0 r y . 5 6 5 0 . . 4 0 0 16 16 16 16 0 0 None
    0x1c0 0 sg 0 16 0 r . . 5 6 5 0 . . 4 0 0 16 16 16 16 0 0 None
    0x1c1 0 sg 0 0 0 r . . 0 0 0 0 . . 4 16 0 16 16 16 16 0 0 None
    0x1c2 0 sg 0 0 0 r . . 0 0 0 0 . . 4 24 0 16 16 16 16 0 0 None
    0x1c3 0 sg 0 0 0 r . . 0 0 0 0 . . 4 24 8 16 16 16 16 0 0 None
    0x1c4 0 sg 0 32 0 r . . 16 16 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1c5 0 sg 0 32 0 . . 16 16 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1c6 0 sg 0 32 0 r y . 16 16 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1c7 0 sg 0 32 0 y . 16 16 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1c8 0 sg 0 32 0 r . . 32 0 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1c9 0 sg 0 32 0 . . 32 0 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1ca 0 sg 0 32 0 r y . 32 0 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1cb 0 sg 0 32 0 y . 32 0 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1cc 0 sg 0 64 0 r . . 16 16 16 16 f . 4 0 0 16 16 16 16 0 0 None
    0x1cd 0 sg 0 64 0 . . 16 16 16 16 f . 4 0 0 16 16 16 16 0 0 None
    0x1ce 0 sg 0 64 0 r y . 16 16 16 16 f . 4 0 0 16 16 16 16 0 0 None
    0x1cf 0 sg 0 64 0 y . 16 16 16 16 f . 4 0 0 16 16 16 16 0 0 None
    0x1d0 0 sg 0 128 0 r . . 32 32 32 32 f . 4 0 0 16 16 16 16 0 0 None
    0x1d1 0 sg 0 128 0 . . 32 32 32 32 f . 4 0 0 16 16 16 16 0 0 None
    0x1d2 0 sg 0 128 0 r y . 32 32 32 32 f . 4 0 0 16 16 16 16 0 0 None
    0x1d3 0 sg 0 128 0 y . 32 32 32 32 f . 4 0 0 16 16 16 16 0 0 None
    0x1d4 0 sg 0 32 0 r . . 16 16 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1d5 0 sg 0 32 0 . . 16 16 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1d6 0 sg 0 32 0 r y . 16 16 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1d7 0 sg 0 32 0 y . 16 16 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1d8 0 sg 0 32 0 r . . 16 16 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x1d9 0 sg 0 32 0 . . 16 16 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x1da 0 sg 0 32 0 r y . 16 16 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x1db 0 sg 0 32 0 y . 16 16 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x1dc 0 sg 0 32 0 r . . 32 0 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1dd 0 sg 0 32 0 . . 32 0 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1de 0 sg 0 32 0 r y . 32 0 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1df 0 sg 0 32 0 y . 32 0 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1e0 0 sg 0 32 0 r . . 32 0 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x1e1 0 sg 0 32 0 . . 32 0 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x1e2 0 sg 0 32 0 r y . 32 0 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x1e3 0 sg 0 32 0 y . 32 0 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x1e4 0 sg 0 64 0 r . . 16 16 16 16 f . 4 24 0 16 16 16 16 0 0 None
    0x1e5 0 sg 0 64 0 . . 16 16 16 16 f . 4 24 0 16 16 16 16 0 0 None
    0x1e6 0 sg 0 64 0 r y . 16 16 16 16 f . 4 24 0 16 16 16 16 0 0 None
    0x1e7 0 sg 0 64 0 y . 16 16 16 16 f . 4 24 0 16 16 16 16 0 0 None
    0x1e8 0 sg 0 64 0 r . . 16 16 16 16 f . 4 24 8 16 16 16 16 0 0 None
    0x1e9 0 sg 0 64 0 . . 16 16 16 16 f . 4 24 8 16 16 16 16 0 0 None
    0x1ea 0 sg 0 64 0 r y . 16 16 16 16 f . 4 24 8 16 16 16 16 0 0 None
    0x1eb 0 sg 0 64 0 y . 16 16 16 16 f . 4 24 8 16 16 16 16 0 0 None
    0x1ec 0 sg 0 128 0 r . . 32 32 32 32 f . 4 24 0 16 16 16 16 0 0 None
    0x1ed 0 sg 0 128 0 . . 32 32 32 32 f . 4 24 0 16 16 16 16 0 0 None
    0x1ee 0 sg 0 128 0 r y . 32 32 32 32 f . 4 24 0 16 16 16 16 0 0 None
    0x1ef 0 sg 0 128 0 y . 32 32 32 32 f . 4 24 0 16 16 16 16 0 0 None
    0x1f0 0 sg 0 128 0 r . . 32 32 32 32 f . 4 24 8 16 16 16 16 0 0 None
    0x1f1 0 sg 0 128 0 . . 32 32 32 32 f . 4 24 8 16 16 16 16 0 0 None
    0x1f2 0 sg 0 128 0 r y . 32 32 32 32 f . 4 24 8 16 16 16 16 0 0 None
    0x1f3 0 sg 0 128 0 y . 32 32 32 32 f . 4 24 8 16 16 16 16 0 0 None
    0x1f4 0 sg 0 16 0 r . . 16 0 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1f5 0 sg 0 16 0 . . 16 0 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1f6 0 sg 0 16 0 r y . 16 0 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1f7 0 sg 0 16 0 y . 16 0 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1f8 0 sg 0 64 0 r . . 32 32 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1f9 0 sg 0 64 0 . . 32 32 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1fa 0 sg 0 64 0 r y . 32 32 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1fb 0 sg 0 64 0 y . 32 32 0 0 f . 4 0 0 16 16 16 16 0 0 None
    0x1fc 0 sg 0 16 0 r . . 16 0 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1fd 0 sg 0 16 0 . . 16 0 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1fe 0 sg 0 16 0 r y . 16 0 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x1ff 0 sg 0 16 0 y . 16 0 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x200 0 sg 0 16 0 r . . 16 0 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x201 0 sg 0 16 0 . . 16 0 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x202 0 sg 0 16 0 r y . 16 0 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x203 0 sg 0 16 0 y . 16 0 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x204 0 sg 0 64 0 r . . 32 32 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x205 0 sg 0 64 0 . . 32 32 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x206 0 sg 0 64 0 r y . 32 32 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x207 0 sg 0 64 0 y . 32 32 0 0 f . 4 24 0 16 16 16 16 0 0 None
    0x208 0 sg 0 64 0 r . . 32 32 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x209 0 sg 0 64 0 . . 32 32 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x20a 0 sg 0 64 0 r y . 32 32 0 0 f . 4 24 8 16 16 16 16 0 0 None
    0x20b 0 sg 0 64 0 y . 32 32 0 0 f . 4 24 8 16 16 16 16 0 0 None
    name of display: :0
    display: :0 screen: 0
    direct rendering: Yes
    server glx vendor string: NVIDIA Corporation
    server glx version string: 1.4
    server glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile,
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float,
    GLX_ARB_multisample, GLX_EXT_buffer_age,
    GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile,
    GLX_EXT_framebuffer_sRGB, GLX_EXT_stereo_tree, GLX_EXT_swap_control,
    GLX_EXT_swap_control_tear, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_NV_delay_before_swap,
    GLX_NV_float_buffer, GLX_NV_multisample_coverage, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGI_swap_control, GLX_SGI_video_sync
    client glx vendor string: NVIDIA Corporation
    client glx version string: 1.4
    client glx extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile,
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_buffer_age,
    GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile,
    GLX_EXT_fbconfig_packed_float, GLX_EXT_framebuffer_sRGB,
    GLX_EXT_import_context, GLX_EXT_stereo_tree, GLX_EXT_swap_control,
    GLX_EXT_swap_control_tear, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_NV_copy_image,
    GLX_NV_delay_before_swap, GLX_NV_float_buffer,
    GLX_NV_multisample_coverage, GLX_NV_present_video, GLX_NV_swap_group,
    GLX_NV_video_capture, GLX_NV_video_out, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGI_swap_control, GLX_SGI_video_sync
    GLX version: 1.4
    GLX extensions:
    GLX_ARB_create_context, GLX_ARB_create_context_profile,
    GLX_ARB_create_context_robustness, GLX_ARB_fbconfig_float,
    GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_buffer_age,
    GLX_EXT_create_context_es2_profile, GLX_EXT_create_context_es_profile,
    GLX_EXT_framebuffer_sRGB, GLX_EXT_stereo_tree, GLX_EXT_swap_control,
    GLX_EXT_swap_control_tear, GLX_EXT_texture_from_pixmap,
    GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_NV_delay_before_swap,
    GLX_NV_float_buffer, GLX_NV_multisample_coverage, GLX_SGIX_fbconfig,
    GLX_SGIX_pbuffer, GLX_SGI_swap_control, GLX_SGI_video_sync
    OpenGL vendor string: NVIDIA Corporation
    OpenGL renderer string: GeForce 210/PCIe/SSE2
    OpenGL core profile version string: 3.3.0 NVIDIA 340.76
    OpenGL core profile shading language version string: 3.30 NVIDIA via Cg compiler
    OpenGL core profile context flags: (none)
    OpenGL core profile profile mask: core profile
    OpenGL core profile extensions:
    GL_ARB_ES2_compatibility, GL_ARB_ES3_compatibility,
    GL_ARB_arrays_of_arrays, GL_ARB_base_instance, GL_ARB_blend_func_extended,
    GL_ARB_clear_buffer_object, GL_ARB_color_buffer_float,
    GL_ARB_compressed_texture_pixel_storage, GL_ARB_conservative_depth,
    GL_ARB_copy_buffer, GL_ARB_copy_image, GL_ARB_debug_output,
    GL_ARB_depth_buffer_float, GL_ARB_depth_clamp, GL_ARB_depth_texture,
    GL_ARB_draw_buffers, GL_ARB_draw_buffers_blend,
    GL_ARB_draw_elements_base_vertex, GL_ARB_draw_instanced,
    GL_ARB_enhanced_layouts, GL_ARB_explicit_attrib_location,
    GL_ARB_explicit_uniform_location, GL_ARB_fragment_coord_conventions,
    GL_ARB_fragment_layer_viewport, GL_ARB_fragment_program,
    GL_ARB_fragment_program_shadow, GL_ARB_fragment_shader,
    GL_ARB_framebuffer_no_attachments, GL_ARB_framebuffer_object,
    GL_ARB_framebuffer_sRGB, GL_ARB_geometry_shader4,
    GL_ARB_get_program_binary, GL_ARB_half_float_pixel,
    GL_ARB_half_float_vertex, GL_ARB_imaging, GL_ARB_instanced_arrays,
    GL_ARB_internalformat_query, GL_ARB_internalformat_query2,
    GL_ARB_invalidate_subdata, GL_ARB_map_buffer_alignment,
    GL_ARB_map_buffer_range, GL_ARB_multi_bind, GL_ARB_multisample

    Thanks for reply guys.
    berbae wrote:Just for testing, try the nouveau driver, following the wiki, and tell if you still have this problem.
    Before posting to forum I also tried nouveau following usual Arch Wiki. End result on nouveau is even worse than prop nvidia driver (see screen shots).
    brebs wrote:Some things to try:
    Thanks and this worked!!
    Passing vmalloc=256m and change in xong.conf provided good results. lspci -v shows same output regardless of adding vmalloc to kernel:
    01:00.0 VGA compatible controller: NVIDIA Corporation GT218 [GeForce 210] (rev a2) (prog-if 00 [VGA controller])
    Subsystem: Gigabyte Technology Co., Ltd Device 3525
    Flags: bus master, fast devsel, latency 0, IRQ 25
    Memory at fb000000 (32-bit, non-prefetchable) [size=16M]
    Memory at b0000000 (64-bit, prefetchable) [size=256M]
    Memory at ce000000 (64-bit, prefetchable) [size=32M]
    I/O ports at ef00 [size=128]
    [virtual] Expansion ROM at fc000000 [disabled] [size=512K]
    Capabilities: <access denied>
    Kernel driver in use: nvidia
    Kernel modules: nouveau, nvidia
    Last question for my understanding if you can answer:
    1. My GeForce 210 card has 1gb memory. Is 256m is coming from system RAM or coming from 1gb GPU's own memory. If case is latter, do you think making it full 1gb will help performance (like gaming ,etc)

  • [SOLVED] nouveau error while booting arch

    Hi!!! I'm newbie to arch, here is an error I can't solve myself. I search in google for solutions but they didn't solved. Please help me to solve this. I dual booted arch linux with window 8.1. After installation, while booting for the first time, this error occurred.
    Here is the error I found.
    [0.063411] Ignoring BGRT: Invalid status 0 (expected 1)
    starting version 218
    Arch_Linux: clean, 70622/18677760 files, 1643393/74703025 blocks
    [ 15.759913] nouveau E[ PIBUST][0000:01:00.0] HUBO: 0xffffffff (0x1a
    [ 15.759952] nouveau E[ PIBUST][0000:01:00.0] GPCO: 0x00000001 (0x1a
    [ 15.823494] nouveau E[ PBUS][0000:01:00.0] MMIO: 0x00000000 FAULT a
    [ 15.824050] nouveau E[ DRM]Pointer to TMDS table invalid
    [ 15.824072] nouveau E[ DRM]Pointer to flat panel table invalid}
    Last edited by aaa234 (2015-02-04 04:18:42)

    aaa234 wrote:
    runical wrote:
    That is a different problem to be honest. I assume that you can login using your normal user? If you set up sudo you might be able to get into root by using
    sudo su
    and change the password like that.
    I'm sorry if this is a noob question. Where do I type sudo su because as soon as the OS is booted, the system asks localhost login and password. I haven't installed any desktop environment yet. I only set up a password under arch-chroot but I can't login with and without that password.
    I was assuming a normal installed environment with a normal user. Using "sudo su", you can abuse privileges granted by sudo to circumvent the password required by su. A well configured sudo should not allow this, but in this case it seemed likely that the system was not completely set up yet.
    problem has been solved with this https://bbs.archlinux.org/viewtopic.php?id=168879
    Then, if there are no more problems, please mark the thread as solved.

  • Both nouveau and nVidia driver problems with Stellarium

    Stellarium v0.12.4 with either xf86-video-nouveau 1.0.9-1 or nvidia (latest driver) and an nVidia MCP78S (GeForce 8200) chip usually results in either distorted graphics and sometimes complete system lock-up.
    The nVidia driver is worse, nouveau sometimes works but its a crap shoot. This has been going on for about 2 months now, and I have tested both drivers.
    With nouveau it dumps these boot errors, but works on other software just fine:
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x10022c
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x100230
    Oct 21 17:17:48 eagle kernel: nouveau E[ PBUS][0000:02:00.0] MMIO read of 0x00000008 FAULT at 0x1002e4
    I cannot use the nvidia driver in general because it sometimes causes graphics faults when using Chromium.
    I don't get any other graphics issues other than with Stellarium (and obviously I cannot run google-earth with nouveau either).
    Any ideas on where to start with this problem would be appreciated.

    Thanks for answering!
    Following your advice, I downloaded and installed the latest driver from Nvidia (http://www.nvidia.fr/object/notebook-win7-winvista-64bit-260.99-whql-driver-fr.html). I'm not sure this is the one I updated on the first place since I don't remember when I did it (it was a few months ago, and as I had internet without using wi-fi, I didn't see that much the BSOD, but now that I'm back to wi-fi, the problem occurs often). Until now, no BSOD, but the first problem "Display Driver Stopped Responding and Has Recovered" is still here, and a little bit more annoying since it can occurs while watching some video files (it didn't happen before).
    For the BIOS problem, it was the one described on the link you gave, but no the problem is over. I was just thinking it could be relevant to understand the others problems.
    I'll let you know if the BSOD is (or seems) definitively gone. In the meantime, if someone knows how to fix the problem of the display driver that stopped responding and was recovered, it would be greatly appreciated!

  • [SOLVED] xcompmgr and nvidia geforce 6800 LE

    Hello everybody,
    I am installing arch on my main desktop on which I have a nvidia 6800 LE. I used wiki and almost everything works fine. However I am used to have xcompmgr running with awesome wm. But my xorg configuration for my geforce 6800 LE should be not correct because it's not working at all.
    I observed that both modules freetype and type1 that are highlighted in wiki are not found on my computer ...
    You can find my xorg here :
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Thu Apr 16 19:36:29 PDT 2009
    Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
        ModulePath      "/usr/lib/xorg/modules"
        FontPath        "/usr/share/fonts/misc"
        FontPath        "/usr/share/fonts/100dpi:unscaled"
        FontPath        "/usr/share/fonts/75dpi:unscaled"
        FontPath        "/usr/share/fonts/TTF"
        FontPath        "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
       # Load           "glx"
       # Load           "dri2"
       # Load           "record"
       # Load       "xtrap"
        Load           "dbe"
        Load           "extmod"
       # Load           "type1"
       # Load           "freetype"
        Load           "glx"
    EndSection
    Section "ServerFlags"
    #    Option         "AutoAddDevices" "False"
    #    Option         "AllowEmptyInput"  "False"
        Option         "DontZap" "false"
    EndSection
    Section "InputDevice"
        Identifier     "Keyboard0"
        Driver         "kbd"
        Option         "XkbLayout" "fr"
        Option         "XkbVariant" "latin9"
    EndSection
    Section "InputDevice"
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/input/mice"
        Option         "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Monitor Vendor"
        ModelName      "Monitor Model"
        HorizSync       30.0 - 130.0
        VertRefresh     50.0 - 100.0
    EndSection
    Section "Device"
            ### Available Driver options are:-
            ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
            ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
            ### [arg]: arg optional
            #Option     "ShadowFB"               # [<bool>]
            #Option     "DefaultRefresh"         # [<bool>]
            #Option     "ModeSetClearScreen"     # [<bool>]
        Identifier     "Card0"
        Driver         "nvidia"
        VendorName     "nVidia Corporation"
        BoardName      "NV40.2 [GeForce 6800 LE]"
        Option       "RenderAccel" "true"
        Option         "NoLogo" "true"
        Option         "AGPFastWrite" "true"
        Option         "EnablePageFlip" "true"
        Option         "AllowGLXWithComposite" "true"
        Option         "XAANoOffscreenPixmaps"
        Option         "NoFlip" "True"
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Card0"
        Monitor        "Monitor0"
        DefaultDepth   24
        Option         "AddARGBGLXVisuals" "True"
        SubSection     "Display"
            Viewport    0 0
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       4
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       8
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       15
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       16
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       24
        Modes       "1280x1024" "1024x768" "800x600"
        EndSubSection
    EndSection
    Section "Extensions"
        Option         "Composite" "Enable"
       # Option       "RENDER" "Enable"
    EndSection
    I was wondering if you had an idea of the cause of this non functioning. Moreover if someone has a good working xorg for geforce 6800 LE, you would be happy to know about it.
    Thanks a lot for you help,
    Sirsurthur
    Last edited by Sirsurthur (2009-05-24 07:56:37)

    Solved :
    # nvidia-xconfig: X configuration file generated by nvidia-xconfig
    # nvidia-xconfig:  version 1.0  (buildmeister@builder63)  Thu Apr 16 19:36:29 PDT 2009
    Section "ServerLayout"
        Identifier     "X.org Configured"
        Screen      0  "Screen0" 0 0
        InputDevice    "Mouse0" "CorePointer"
        InputDevice    "Keyboard0" "CoreKeyboard"
    EndSection
    Section "Files"
        ModulePath      "/usr/lib/xorg/modules"
        FontPath        "/usr/share/fonts/misc"
        FontPath        "/usr/share/fonts/100dpi:unscaled"
        FontPath        "/usr/share/fonts/75dpi:unscaled"
        FontPath        "/usr/share/fonts/TTF"
        FontPath        "/usr/share/fonts/Type1"
    EndSection
    Section "Module"
         Load "bitmap"
         Load "ddc"
         Load "dbe"
         Load "dri"
         Load "extmod"
        # Load "freetype"
         Load "glx"
         Load "int10"
        # Load "type1"
         Load "vbe"
       # Load           "glx"
       # Load           "dri2"
       # Load           "record"
       # Load       "xtrap"
       # Load           "dbe"
       # Load           "extmod"
       # Load           "type1"
       # Load           "freetype"
       # Load           "glx"
    EndSection
    Section "ServerFlags"
        Option         "AutoAddDevices" "False"
        Option         "AllowEmptyInput"  "False"
        Option         "DontZap" "false"
    EndSection
    Section "InputDevice"
        Identifier     "Keyboard0"
        Driver         "kbd"
        Option         "XkbLayout" "fr"
        Option         "XkbVariant" "latin9"
    EndSection
    Section "InputDevice"
        Identifier     "Mouse0"
        Driver         "mouse"
        Option         "Protocol" "auto"
        Option         "Device" "/dev/input/mice"
        Option         "ZAxisMapping" "4 5 6 7"
    EndSection
    Section "Monitor"
        Identifier     "Monitor0"
        VendorName     "Monitor Vendor"
        ModelName      "Monitor Model"
        HorizSync       30.0 - 130.0
        VertRefresh     50.0 - 100.0
    EndSection
    Section "Device"
            ### Available Driver options are:-
            ### Values: <i>: integer, <f>: float, <bool>: "True"/"False",
            ### <string>: "String", <freq>: "<f> Hz/kHz/MHz"
            ### [arg]: arg optional
            #Option     "ShadowFB"               # [<bool>]
            #Option     "DefaultRefresh"         # [<bool>]
            #Option     "ModeSetClearScreen"     # [<bool>]
        Identifier     "Card0"
        Driver         "nvidia"
        VendorName     "nVidia Corporation"
        BoardName      "NV40.2 [GeForce 6800 LE]"
        Option       "RenderAccel" "true"
        Option         "NoLogo" "true"
        Option         "AGPFastWrite" "true"
        Option         "EnablePageFlip" "true"
        Option         "AllowGLXWithComposite" "true"
        Option         "XAANoOffscreenPixmaps"
        Option         "NoFlip" "True"
    EndSection
    Section "Screen"
        Identifier     "Screen0"
        Device         "Card0"
        Monitor        "Monitor0"
        DefaultDepth   24
        Option         "AddARGBGLXVisuals" "True"
        SubSection     "Display"
            Viewport    0 0
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       4
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       8
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       15
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       16
        EndSubSection
        SubSection     "Display"
            Viewport    0 0
            Depth       24
        Modes       "1280x1024" "1024x768" "800x600"
        EndSubSection
    EndSection
    Section "Extensions"
        Option         "Composite" "Enable"
       # Option       "RENDER" "Enable"
    EndSection

  • SOLVED: Installation of NVidia Driver messes with BASH? (x86-64)

    Hello,
    I just started using Arch - I migrated here from Gentoo (I failed to compile a working kernel five times!) and the convoluted messiness of Debian (which had serious problems with the proprietary NVIDIA driver). Within three hours after I began installing Arch it booted fine and I got nearly all my devices to work. Yaaay!
    I've recently encountered a peculiar problem that occurs after installing GNOME on a 64-bit system. I've re-installed Arch three times, and have seen this problem three times repeated: after all the gnome and gnome-extra packages have been downloaded, unpacked, configured, and installed, BASH no longer recognizes most of the programs that were already installed properly (and were working fine just beforehand);
    I get "command not found" for such commands as make, dhcpcd, modprobe, ifconfig, even reboot and shutdown!!!
    It may have something to do with a message I noticed somewhere in pacman's output that was something to the extent of "updating bash..."
    ...Is this a common problem? Or is this user error on my part? When I get home I'll retrieve the config files from my mid-tower's hard drive and post the non-comment parts if that will help diagnose the problem.
    Last edited by deconstrained (2008-04-01 03:55:41)

    problem: SOLVED --
    I found an old stage 3 tarball (gentoo) from my USB drive that had ./etc/profile in it. I stuck that in /etc/ and it's working fine In fact, it's got some nice features already written into it, i.e. optionally different default paths for the superuser and normal users.
    Just in case anyone else has the same problem, finds this thread in a forum search and needs an /etc/profile:
    # /etc/profile: login shell setup
    # That this file is used by any Bourne-shell derivative to setup the
    # environment for login shells.
    # Load environment settings from profile.env, which is created by
    # env-update from the files in /etc/env.d
    # 077 would be more secure, but 022 is generally quite realistic
    umask 022
    # Set up PATH depending on whether we're root or a normal user.
    # There's no real reason to exclude sbin paths from the normal user,
    # but it can make tab-completion easier when they aren't in the
    # user's PATH to pollute the executable namespace.
    # It is intentional in the following line to use || instead of -o.
    # This way the evaluation can be short-circuited and calling whoami is
    # avoided.
    if [ "$EUID" = "0" ] || [ "$USER" = "root" ] ; then
    PATH="/usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:${ROOTPATH}"
    else
    PATH="/usr/local/bin:/usr/bin:/bin:${PATH}"
    fi
    export PATH
    unset ROOTPATH
    # Extract the value of EDITOR
    [ -z "$EDITOR" ] && EDITOR="`. /etc/rc.conf 2>/dev/null; echo $EDITOR`"
    [ -z "$EDITOR" ] && EDITOR="/bin/nano"
    export EDITOR
    if [ -n "${BASH_VERSION}" ] ; then
    # Newer bash ebuilds include /etc/bash/bashrc which will setup PS1
    # including color. We leave out color here because not all
    # terminals support it.
    if [ -f /etc/bash/bashrc ] ; then
    # Bash login shells run only /etc/profile
    # Bash non-login shells run only /etc/bash/bashrc
    # Since we want to run /etc/bash/bashrc regardless, we source it
    # from here. It is unfortunate that there is no way to do
    # this *after* the user's .bash_profile runs (without putting
    # it in the user's dot-files), but it shouldn't make any
    # difference.
    . /etc/bash/bashrc
    else
    PS1='\u@\h \w \$ '
    fi
    else
    # Setup a bland default prompt. Since this prompt should be useable
    # on color and non-color terminals, as well as shells that don't
    # understand sequences such as \h, don't put anything special in it.
    PS1="`whoami`@`uname -n | cut -f1 -d.` \$ "
    fi
    for sh in /etc/profile.d/*.sh ; do
    if [ -r "$sh" ] ; then
    . "$sh"
    fi
    done
    unset sh
    Last edited by deconstrained (2008-04-01 03:54:36)

Maybe you are looking for

  • Several Errors in NWDS while create a web Dynpro UI

    Hi Enrique, of course you could model directly some very specifiy processes in the Process Composer but doing that you are not really working on Business Process Management but more on the operating of some company specific processes you want to oper

  • 15" MBP Start up issues

    I just got my computer in the mail about two days ago and it's already having problems! It was working perfectly fine yesterday. I went out to work for the entire day, came back home, turned my computer on and the processing sign that comes up under

  • Querries

    Hi, all Please help me with the following if any 1.A querry that returns the number of rows in a DB schema object.output should look like. Object Count dba_segments 20645 2.One that returns a table name and tablespace(s) associated with it. Thanks.

  • Why are keystrokes repeating in InDesign CS6 (8.0.2)?

    I'm using InDesign CS6 on a new 27" iMac that I bought in April running Mavericks 10.9.5 and suddenly when I type in my InDesign files, the keys are repeating and so are my mouse clicks (both are bluetooth devices. This is only happening in InDesign

  • Connecting to the cluster

    Hi,           I have a cluster running on a multihomed Solaris Server. It is made of two           servers running on IP1 and IP2 (both using port 7001). It says in the           documentation that I can put in the IPs of the two servers separated by