[SOLVED] nvidia 169.09-2 sigill
hi folks, i have troubles with nvidia driver (i dont know if previous version worked , i installed arch recently). graphic card is geforce6200
problem:
[pacholeq@holly ~]$ glxgears
illegal instruction (SIGILL)
[pacholeq@holly ~]$ glxinfo
name of display: :0.0
illegal instruction (SIGILL)
[pacholeq@holly ~]$ blender
Compiled with Python version 2.5.1.
Checking for installed Python... got it!
/usr/bin/blender: line 11: 7478 illegal instruction (SIGILL) ./blender $*
everything what needs opengl prints this sigill.
here is my xorg.conf generated by nvidia-xconfig: http://dlg.uloz.to/51a308e05ffd88944ca0 … 5/xorg.txt
i havent found anything special i logs..
please help me i need opengl and sorry for my bad english
Last edited by pacholeq (2008-02-26 08:41:26)
buddabrod: sorry im so stupid just click on: www.uloz.to/209345/xorg.txt in the middle of that page (follow xorg.txt) i can put it somwhere else if you know some good uploadserver , but its standart xorg ...
mrunion: yes it supports
yes, i installed it via pacman and yes i rebooted many times nvidia module is loaded
Similar Messages
-
Downgrading from Nvidia 169.09 to 100.14.19
Okay, here is the deal, nvidia 169.09 needs kernel 2.6.24, but the 100.14.19 needs the 2.6.23 version od the kernel. I want to downgrade from 169.09 Drivers to 100.14.19, but keeping the 2.6.24 kernel
Rebuild the package with ABS against your current kernel and it should be fine (you'll need to rebuild nvidia-utils too). This guide should help: http://wiki.archlinux.org/index.php/NVI … tom_kernel
EDIT: Actually, nvidia-utils doesn't need to get rebuilt, it's enough to downgrade it.
Last edited by [vEX] (2008-02-14 17:00:53) -
[SOLVED] nvidia and xorg-server, slow start compared to nv
I've seen many similar topics but none that have been solved, therefore the new topic.
Starting xorg with nv driver takes just a few seconds to desktop, while using nvidia takes almost 10 seconds more to get to desktop. Although after reaching desktop everything works fine. I've used a minimal xorg.conf for each driver (replacing nvidia with nv):
Section "Device"
Identifier "Device0"
Driver "nvidia"
EndSection
The /var/log/Xorg.0.log when using nvidia:
[ 22.779]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 22.779] X Protocol Version 11, Revision 0
[ 22.779] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 22.779] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 22.779] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
[ 22.779] Build Date: 30 May 2012 07:24:13PM
[ 22.779]
[ 22.779] Current version of pixman: 0.26.0
[ 22.779] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 22.779] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 22.779] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:37:16 2012
[ 22.844] (==) Using config file: "/etc/X11/xorg.conf"
[ 22.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 23.106] (==) No Layout section. Using the first Screen section.
[ 23.106] (==) No screen section available. Using defaults.
[ 23.106] (**) |-->Screen "Default Screen Section" (0)
[ 23.106] (**) | |-->Monitor "<default monitor>"
[ 23.106] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 23.106] (**) | |-->Device "Device0"
[ 23.106] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 23.106] (==) Automatically adding devices
[ 23.106] (==) Automatically enabling devices
[ 23.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 23.219] Entry deleted from font path.
[ 23.414] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 23.414] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 23.414] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 23.414] (II) Loader magic: 0x7c58e0
[ 23.414] (II) Module ABI versions:
[ 23.414] X.Org ANSI C Emulation: 0.4
[ 23.414] X.Org Video Driver: 12.0
[ 23.414] X.Org XInput driver : 16.0
[ 23.414] X.Org Server Extension : 6.0
[ 23.415] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 23.415] (II) Open ACPI successful (/var/run/acpid.socket)
[ 23.415] (II) LoadModule: "extmod"
[ 23.453] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 23.487] (II) Module extmod: vendor="X.Org Foundation"
[ 23.487] compiled for 1.12.2, module version = 1.0.0
[ 23.487] Module class: X.Org Server Extension
[ 23.487] ABI class: X.Org Server Extension, version 6.0
[ 23.487] (II) Loading extension MIT-SCREEN-SAVER
[ 23.487] (II) Loading extension XFree86-VidModeExtension
[ 23.487] (II) Loading extension XFree86-DGA
[ 23.487] (II) Loading extension DPMS
[ 23.487] (II) Loading extension XVideo
[ 23.487] (II) Loading extension XVideo-MotionCompensation
[ 23.487] (II) Loading extension X-Resource
[ 23.487] (II) LoadModule: "dbe"
[ 23.487] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 23.512] (II) Module dbe: vendor="X.Org Foundation"
[ 23.512] compiled for 1.12.2, module version = 1.0.0
[ 23.512] Module class: X.Org Server Extension
[ 23.512] ABI class: X.Org Server Extension, version 6.0
[ 23.512] (II) Loading extension DOUBLE-BUFFER
[ 23.512] (II) LoadModule: "glx"
[ 23.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 26.824] (II) Module glx: vendor="NVIDIA Corporation"
[ 26.868] compiled for 4.0.2, module version = 1.0.0
[ 26.868] Module class: X.Org Server Extension
[ 26.868] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 26.869] (II) Loading extension GLX
[ 26.869] (II) LoadModule: "record"
[ 26.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 26.941] (II) Module record: vendor="X.Org Foundation"
[ 26.941] compiled for 1.12.2, module version = 1.13.0
[ 26.941] Module class: X.Org Server Extension
[ 26.941] ABI class: X.Org Server Extension, version 6.0
[ 26.941] (II) Loading extension RECORD
[ 26.941] (II) LoadModule: "dri"
[ 26.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 27.011] (II) Module dri: vendor="X.Org Foundation"
[ 27.011] compiled for 1.12.2, module version = 1.0.0
[ 27.011] ABI class: X.Org Server Extension, version 6.0
[ 27.011] (II) Loading extension XFree86-DRI
[ 27.011] (II) LoadModule: "dri2"
[ 27.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 27.046] (II) Module dri2: vendor="X.Org Foundation"
[ 27.047] compiled for 1.12.2, module version = 1.2.0
[ 27.047] ABI class: X.Org Server Extension, version 6.0
[ 27.047] (II) Loading extension DRI2
[ 27.047] (II) LoadModule: "nvidia"
[ 27.122] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 27.306] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 27.306] compiled for 4.0.2, module version = 1.0.0
[ 27.306] Module class: X.Org Video Driver
[ 27.608] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
[ 27.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 27.617] (++) using VT number 7
[ 27.678] (II) Loading sub module "fb"
[ 27.678] (II) LoadModule: "fb"
[ 27.850] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 27.870] (II) Module fb: vendor="X.Org Foundation"
[ 27.870] compiled for 1.12.2, module version = 1.0.0
[ 27.870] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.870] (II) Loading sub module "wfb"
[ 27.870] (II) LoadModule: "wfb"
[ 27.871] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 27.879] (II) Module wfb: vendor="X.Org Foundation"
[ 27.879] compiled for 1.12.2, module version = 1.0.0
[ 27.879] ABI class: X.Org ANSI C Emulation, version 0.4
[ 27.879] (II) Loading sub module "ramdac"
[ 27.879] (II) LoadModule: "ramdac"
[ 27.879] (II) Module "ramdac" already built-in
[ 27.934] (II) NVIDIA(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 27.934] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 27.934] (==) NVIDIA(0): RGB weight 888
[ 27.934] (==) NVIDIA(0): Default visual is TrueColor
[ 27.934] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 27.935] (**) NVIDIA(0): Enabling 2D acceleration
[ 29.873] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
[ 29.873] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
[ 30.786] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:2:0:0 (GPU-0)
[ 30.786] (--) NVIDIA(0): Memory: 524288 kBytes
[ 30.786] (--) NVIDIA(0): VideoBIOS: 70.18.53.00.ff
[ 30.786] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 30.786] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 30.789] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:2:0:0
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
[ 30.789] (--) NVIDIA(0): clock
[ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
[ 30.789] (--) NVIDIA(0): LVDS
[ 30.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 30.789] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
[ 30.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
[ 30.836] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 30.836] (==) NVIDIA(0):
[ 30.836] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 30.836] (==) NVIDIA(0): will be used as the requested mode.
[ 30.836] (==) NVIDIA(0):
[ 30.836] (II) NVIDIA(0): Validated modes:
[ 30.836] (II) NVIDIA(0): "nvidia-auto-select"
[ 30.836] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
[ 31.892] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
[ 31.892] (--) NVIDIA(0): option
[ 31.892] (--) Depth 24 pixmap format is 32 bpp
[ 31.892] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
[ 31.900] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 34.862] (II) Loading extension NV-GLX
[ 37.299] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 37.299] (==) NVIDIA(0): Backing store disabled
[ 37.299] (==) NVIDIA(0): Silken mouse enabled
[ 37.300] (==) NVIDIA(0): DPMS enabled
[ 37.300] (II) Loading extension NV-CONTROL
[ 37.300] (II) Loading extension XINERAMA
[ 37.300] (II) Loading sub module "dri2"
[ 37.300] (II) LoadModule: "dri2"
[ 37.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 37.300] (II) Module dri2: vendor="X.Org Foundation"
[ 37.300] compiled for 1.12.2, module version = 1.2.0
[ 37.300] ABI class: X.Org Server Extension, version 6.0
[ 37.300] (II) NVIDIA(0): [DRI2] Setup complete
[ 37.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 37.301] (==) RandR enabled
[ 37.301] (II) Initializing built-in extension Generic Event Extension
[ 37.301] (II) Initializing built-in extension SHAPE
[ 37.301] (II) Initializing built-in extension MIT-SHM
[ 37.301] (II) Initializing built-in extension XInputExtension
[ 37.301] (II) Initializing built-in extension XTEST
[ 37.301] (II) Initializing built-in extension BIG-REQUESTS
[ 37.301] (II) Initializing built-in extension SYNC
[ 37.301] (II) Initializing built-in extension XKEYBOARD
[ 37.301] (II) Initializing built-in extension XC-MISC
[ 37.301] (II) Initializing built-in extension SECURITY
[ 37.301] (II) Initializing built-in extension XINERAMA
[ 37.301] (II) Initializing built-in extension XFIXES
[ 37.301] (II) Initializing built-in extension RENDER
[ 37.301] (II) Initializing built-in extension RANDR
[ 37.301] (II) Initializing built-in extension COMPOSITE
[ 37.301] (II) Initializing built-in extension DAMAGE
[ 37.302] (II) Initializing extension GLX
[ 38.717] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 38.717] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.717] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 38.717] (II) LoadModule: "evdev"
[ 38.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 38.769] (II) Module evdev: vendor="X.Org Foundation"
[ 38.769] compiled for 1.12.0, module version = 2.7.0
[ 38.769] Module class: X.Org XInput Driver
[ 38.769] ABI class: X.Org XInput driver, version 16.0
[ 38.769] (II) Using input driver 'evdev' for 'Power Button'
[ 38.769] (**) Power Button: always reports core events
[ 38.769] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 38.769] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38.769] (--) evdev: Power Button: Found keys
[ 38.769] (II) evdev: Power Button: Configuring as keyboard
[ 38.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 38.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 38.769] (**) Option "xkb_rules" "evdev"
[ 38.769] (**) Option "xkb_model" "evdev"
[ 38.769] (**) Option "xkb_layout" "se"
[ 38.835] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 38.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 38.835] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 38.835] (II) Using input driver 'evdev' for 'Video Bus'
[ 38.835] (**) Video Bus: always reports core events
[ 38.835] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 38.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 38.835] (--) evdev: Video Bus: Found keys
[ 38.835] (II) evdev: Video Bus: Configuring as keyboard
[ 38.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 38.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 38.836] (**) Option "xkb_rules" "evdev"
[ 38.836] (**) Option "xkb_model" "evdev"
[ 38.836] (**) Option "xkb_layout" "se"
[ 38.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 38.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 38.837] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 38.837] (II) Using input driver 'evdev' for 'Power Button'
[ 38.837] (**) Power Button: always reports core events
[ 38.837] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 38.837] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 38.837] (--) evdev: Power Button: Found keys
[ 38.837] (II) evdev: Power Button: Configuring as keyboard
[ 38.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 38.837] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 38.837] (**) Option "xkb_rules" "evdev"
[ 38.837] (**) Option "xkb_model" "evdev"
[ 38.837] (**) Option "xkb_layout" "se"
[ 38.838] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 38.838] (II) No input driver specified, ignoring this device.
[ 38.838] (II) This device may have been added with another device file.
[ 38.838] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 38.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 38.838] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 38.838] (II) Using input driver 'evdev' for 'Sleep Button'
[ 38.838] (**) Sleep Button: always reports core events
[ 38.838] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 38.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 38.839] (--) evdev: Sleep Button: Found keys
[ 38.839] (II) evdev: Sleep Button: Configuring as keyboard
[ 38.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 38.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 38.839] (**) Option "xkb_rules" "evdev"
[ 38.839] (**) Option "xkb_model" "evdev"
[ 38.839] (**) Option "xkb_layout" "se"
[ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 38.840] (II) No input driver specified, ignoring this device.
[ 38.840] (II) This device may have been added with another device file.
[ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 38.840] (II) No input driver specified, ignoring this device.
[ 38.840] (II) This device may have been added with another device file.
[ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 38.841] (II) No input driver specified, ignoring this device.
[ 38.841] (II) This device may have been added with another device file.
[ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 38.841] (II) No input driver specified, ignoring this device.
[ 38.841] (II) This device may have been added with another device file.
[ 38.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 38.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 38.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 38.842] (**) Logitech USB Receiver: always reports core events
[ 38.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 38.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 38.842] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 38.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 38.842] (--) evdev: Logitech USB Receiver: Found relative axes
[ 38.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 38.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 38.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 38.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 38.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 38.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 38.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 38.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 38.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 38.844] (II) No input driver specified, ignoring this device.
[ 38.844] (II) This device may have been added with another device file.
[ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 38.844] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 38.844] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
[ 38.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 38.844] (**) Logitech USB Receiver: always reports core events
[ 38.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 38.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 38.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 38.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 38.845] (--) evdev: Logitech USB Receiver: Found relative axes
[ 38.845] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 38.845] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 38.845] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 38.845] (--) evdev: Logitech USB Receiver: Found keys
[ 38.845] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 38.845] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 38.845] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 38.845] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 38.845] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 38.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[ 38.845] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 38.845] (**) Option "xkb_rules" "evdev"
[ 38.845] (**) Option "xkb_model" "evdev"
[ 38.845] (**) Option "xkb_layout" "se"
[ 38.845] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 38.845] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 38.846] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 38.846] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 38.846] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
[ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
[ 38.846] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 38.846] (**) USB 2.0 PC Camera: always reports core events
[ 38.846] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
[ 38.846] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[ 38.846] (--) evdev: USB 2.0 PC Camera: Found keys
[ 38.846] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 38.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 38.846] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
[ 38.846] (**) Option "xkb_rules" "evdev"
[ 38.846] (**) Option "xkb_model" "evdev"
[ 38.847] (**) Option "xkb_layout" "se"
[ 38.847] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 38.847] (II) No input driver specified, ignoring this device.
[ 38.847] (II) This device may have been added with another device file.
[ 38.847] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 38.847] (II) No input driver specified, ignoring this device.
[ 38.847] (II) This device may have been added with another device file.
[ 38.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 38.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 38.847] (**) AT Translated Set 2 keyboard: always reports core events
[ 38.847] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 38.847] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 38.847] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 38.847] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 38.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 38.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 38.848] (**) Option "xkb_rules" "evdev"
[ 38.848] (**) Option "xkb_model" "evdev"
[ 38.848] (**) Option "xkb_layout" "se"
[ 38.848] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 38.848] (II) LoadModule: "synaptics"
[ 38.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 38.911] (II) Module synaptics: vendor="X.Org Foundation"
[ 38.911] compiled for 1.12.1, module version = 1.6.1
[ 38.911] Module class: X.Org XInput Driver
[ 38.911] ABI class: X.Org XInput driver, version 16.0
[ 38.911] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 38.911] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.911] (**) Option "Device" "/dev/input/event9"
[ 38.911] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 38.911] (**) Option "TapButton1" "1"
[ 38.911] (**) Option "TapButton2" "2"
[ 38.911] (**) Option "TapButton3" "3"
[ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 38.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 38.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 38.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 38.913] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 38.913] (II) No input driver specified, ignoring this device.
[ 38.913] (II) This device may have been added with another device file.
[ 38.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 38.913] (II) No input driver specified, ignoring this device.
[ 38.913] (II) This device may have been added with another device file.
The /var/log/Xorg.0.log when using nv:
[ 52.162]
X.Org X Server 1.12.2
Release Date: 2012-05-29
[ 52.163] X Protocol Version 11, Revision 0
[ 52.163] Build Operating System: Linux 3.0.32-1-lts x86_64
[ 52.164] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
[ 52.164] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
[ 52.165] Build Date: 30 May 2012 07:24:13PM
[ 52.165]
[ 52.165] Current version of pixman: 0.26.0
[ 52.166] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 52.166] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 52.168] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:30:26 2012
[ 52.168] (==) Using config file: "/etc/X11/xorg.conf"
[ 52.168] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 52.168] (==) No Layout section. Using the first Screen section.
[ 52.168] (==) No screen section available. Using defaults.
[ 52.168] (**) |-->Screen "Default Screen Section" (0)
[ 52.168] (**) | |-->Monitor "<default monitor>"
[ 52.168] (==) No device specified for screen "Default Screen Section".
Using the first device section listed.
[ 52.168] (**) | |-->Device "Device0"
[ 52.168] (==) No monitor specified for screen "Default Screen Section".
Using a default monitor configuration.
[ 52.169] (==) Automatically adding devices
[ 52.169] (==) Automatically enabling devices
[ 52.169] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 52.169] Entry deleted from font path.
[ 52.169] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 52.169] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 52.169] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 52.169] (II) Loader magic: 0x7c58e0
[ 52.169] (II) Module ABI versions:
[ 52.169] X.Org ANSI C Emulation: 0.4
[ 52.169] X.Org Video Driver: 12.0
[ 52.169] X.Org XInput driver : 16.0
[ 52.169] X.Org Server Extension : 6.0
[ 52.169] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
[ 52.170] (II) Open ACPI successful (/var/run/acpid.socket)
[ 52.170] (II) LoadModule: "extmod"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 52.170] (II) Module extmod: vendor="X.Org Foundation"
[ 52.170] compiled for 1.12.2, module version = 1.0.0
[ 52.170] Module class: X.Org Server Extension
[ 52.170] ABI class: X.Org Server Extension, version 6.0
[ 52.170] (II) Loading extension MIT-SCREEN-SAVER
[ 52.170] (II) Loading extension XFree86-VidModeExtension
[ 52.170] (II) Loading extension XFree86-DGA
[ 52.170] (II) Loading extension DPMS
[ 52.170] (II) Loading extension XVideo
[ 52.170] (II) Loading extension XVideo-MotionCompensation
[ 52.170] (II) Loading extension X-Resource
[ 52.170] (II) LoadModule: "dbe"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 52.170] (II) Module dbe: vendor="X.Org Foundation"
[ 52.170] compiled for 1.12.2, module version = 1.0.0
[ 52.170] Module class: X.Org Server Extension
[ 52.170] ABI class: X.Org Server Extension, version 6.0
[ 52.170] (II) Loading extension DOUBLE-BUFFER
[ 52.170] (II) LoadModule: "glx"
[ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 52.180] (II) Module glx: vendor="NVIDIA Corporation"
[ 52.180] compiled for 4.0.2, module version = 1.0.0
[ 52.180] Module class: X.Org Server Extension
[ 52.180] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
[ 52.180] (II) Loading extension GLX
[ 52.180] (II) LoadModule: "record"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 52.180] (II) Module record: vendor="X.Org Foundation"
[ 52.180] compiled for 1.12.2, module version = 1.13.0
[ 52.180] Module class: X.Org Server Extension
[ 52.180] ABI class: X.Org Server Extension, version 6.0
[ 52.180] (II) Loading extension RECORD
[ 52.180] (II) LoadModule: "dri"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 52.180] (II) Module dri: vendor="X.Org Foundation"
[ 52.180] compiled for 1.12.2, module version = 1.0.0
[ 52.180] ABI class: X.Org Server Extension, version 6.0
[ 52.180] (II) Loading extension XFree86-DRI
[ 52.180] (II) LoadModule: "dri2"
[ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 52.181] (II) Module dri2: vendor="X.Org Foundation"
[ 52.181] compiled for 1.12.2, module version = 1.2.0
[ 52.181] ABI class: X.Org Server Extension, version 6.0
[ 52.181] (II) Loading extension DRI2
[ 52.181] (II) LoadModule: "nv"
[ 52.181] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
[ 52.181] (II) Module nv: vendor="X.Org Foundation"
[ 52.181] compiled for 1.12.0.901, module version = 2.1.18
[ 52.181] Module class: X.Org Video Driver
[ 52.181] ABI class: X.Org Video Driver, version 12.0
[ 52.181] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
GeForce GTS 360M, Quadro FX 1800M
[ 52.183] (--) using VT number 7
[ 52.211] (--) NV: Found NVIDIA GeForce 310M at 02@00:00:0
[ 52.211] (II) Loading sub module "int10"
[ 52.211] (II) LoadModule: "int10"
[ 52.211] (II) Loading /usr/lib/xorg/modules/libint10.so
[ 52.233] (II) Module int10: vendor="X.Org Foundation"
[ 52.233] compiled for 1.12.2, module version = 1.0.0
[ 52.233] ABI class: X.Org Video Driver, version 12.0
[ 52.233] (II) NV(0): Initializing int10
[ 52.234] (II) NV(0): Bad V_BIOS checksum
[ 52.234] (II) NV(0): Primary V_BIOS segment is: 0xc000
[ 52.234] (--) NV(0): Console is VGA mode 0x105
[ 52.234] (II) NV(0): Creating default Display subsection in Screen section
"Default Screen Section" for depth/fbbpp 24/32
[ 52.234] (==) NV(0): Depth 24, (--) framebuffer bpp 32
[ 52.234] (==) NV(0): RGB weight 888
[ 52.234] (==) NV(0): Default visual is TrueColor
[ 52.235] (==) NV(0): Using hardware cursor
[ 52.235] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
[ 52.245] (II) NV(0): MMIO registers mapped at 0x7f5b4a0aa000
[ 52.245] (--) NV(0): Total video RAM: 512.0 MB
[ 52.245] (--) NV(0): BAR1 size: 256.0 MB
[ 52.245] (--) NV(0): Mapped memory: 256.0 MB
[ 52.317] (II) NV(0): Linear framebuffer mapped at 0x7f5b3a0aa000
[ 52.317] (II) Loading sub module "i2c"
[ 52.317] (II) LoadModule: "i2c"
[ 52.317] (II) Module "i2c" already built-in
[ 52.317] (II) Loading sub module "ddc"
[ 52.317] (II) LoadModule: "ddc"
[ 52.317] (II) Module "ddc" already built-in
[ 52.317] (--) NV(0): Connector map:
[ 52.317] (--) NV(0): Bus 3 -> SOR0 (LVDS)
[ 52.317] (--) NV(0): Bus 0 -> DAC1
[ 52.317] (--) NV(0): Bus 8 -> SOR3
[ 52.317] (--) NV(0): Load detection: 340
[ 52.317] (II) NV(0): I2C bus "I2C0" initialized.
[ 52.317] (II) NV(0): Output VGA1 has no monitor section
[ 52.317] (II) NV(0): I2C bus "I2C8" initialized.
[ 52.317] (II) NV(0): Output DVI3 has no monitor section
[ 52.317] (II) NV(0): LVDS native size 1366x768
[ 52.317] (II) NV(0): Output LVDS has no monitor section
[ 52.317] (II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
[ 52.317] (II) NV(0): Probing for EDID on I2C bus 0...
[ 52.317] (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
[ 52.321] (II) NV(0): ... none found
[ 52.321] (--) NV(0): Trying load detection on VGA1 ... nothing.
[ 52.366] (II) NV(0): EDID for output VGA1
[ 52.366] (II) NV(0): Probing for EDID on I2C bus 8...
[ 52.366] (II) NV(0): I2C device "I2C8:ddc2" registered at address 0xA0.
[ 52.370] (II) NV(0): ... none found
[ 52.370] (II) NV(0): EDID for output DVI3
[ 52.370] (II) NV(0): Probing for EDID on I2C bus 3...
[ 52.370] (II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
[ 52.422] (--) NV(0): DDC detected a DFP:
[ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
[ 52.422] (II) NV(0): Year: 2009 Week: 4
[ 52.422] (II) NV(0): EDID Version: 1.3
[ 52.422] (II) NV(0): Digital Display Input
[ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 52.422] (II) NV(0): Gamma: 2.20
[ 52.422] (II) NV(0): No DPMS capabilities specified
[ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 52.422] (II) NV(0): First detailed timing is preferred mode
[ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 52.422] (II) NV(0): Manufacturer's mask: 0
[ 52.422] (II) NV(0): Supported detailed timing:
[ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
[ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): CMO
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): EDID (in hex):
[ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
[ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
[ 52.422] (II) NV(0): 1e505400000001010101010101010101
[ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
[ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
[ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
[ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
[ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
[ 52.422] (II) NV(0): EDID for output LVDS
[ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
[ 52.422] (II) NV(0): Year: 2009 Week: 4
[ 52.422] (II) NV(0): EDID Version: 1.3
[ 52.422] (II) NV(0): Digital Display Input
[ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
[ 52.422] (II) NV(0): Gamma: 2.20
[ 52.422] (II) NV(0): No DPMS capabilities specified
[ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 52.422] (II) NV(0): First detailed timing is preferred mode
[ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
[ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
[ 52.422] (II) NV(0): Manufacturer's mask: 0
[ 52.422] (II) NV(0): Supported detailed timing:
[ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
[ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
[ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): CMO
[ 52.422] (II) NV(0): N156B6-L06
[ 52.422] (II) NV(0): EDID (in hex):
[ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
[ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
[ 52.422] (II) NV(0): 1e505400000001010101010101010101
[ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
[ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
[ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
[ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
[ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
[ 52.422] (II) NV(0): EDID vendor "CMO", prod id 5760
[ 52.422] (II) NV(0): Printing probed modes for output LVDS
[ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 52.422] (II) NV(0): Output VGA1 disconnected
[ 52.422] (II) NV(0): Output DVI3 disconnected
[ 52.422] (II) NV(0): Output LVDS connected
[ 52.422] (II) NV(0): Using exact sizes for initial modes
[ 52.422] (II) NV(0): Output LVDS using initial mode 1366x768
[ 52.422] (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
[ 52.422] (--) NV(0): Virtual size is 1366x1366 (pitch 1536)
[ 52.422] (**) NV(0): Driver mode "1366x768": 75.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
[ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
[ 52.422] (==) NV(0): DPI set to (96, 96)
[ 52.422] (II) Loading sub module "fb"
[ 52.422] (II) LoadModule: "fb"
[ 52.433] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 52.447] (II) Module fb: vendor="X.Org Foundation"
[ 52.447] compiled for 1.12.2, module version = 1.0.0
[ 52.447] ABI class: X.Org ANSI C Emulation, version 0.4
[ 52.447] (II) Loading sub module "xaa"
[ 52.447] (II) LoadModule: "xaa"
[ 52.447] (II) Loading /usr/lib/xorg/modules/libxaa.so
[ 52.458] (II) Module xaa: vendor="X.Org Foundation"
[ 52.458] compiled for 1.12.2, module version = 1.2.1
[ 52.458] ABI class: X.Org Video Driver, version 12.0
[ 52.458] (II) Loading sub module "ramdac"
[ 52.458] (II) LoadModule: "ramdac"
[ 52.458] (II) Module "ramdac" already built-in
[ 52.458] (--) Depth 24 pixmap format is 32 bpp
[ 52.475] (--) NV(0): 183.99 MB available for offscreen pixmaps
[ 52.507] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
[ 52.507] Screen to screen bit blits
[ 52.507] Solid filled rectangles
[ 52.507] 8x8 mono pattern filled rectangles
[ 52.507] Indirect CPU to Screen color expansion
[ 52.507] Solid Lines
[ 52.507] Scanline Image Writes
[ 52.508] Setting up tile and stipple cache:
[ 52.508] 32 128x128 slots
[ 52.508] 32 256x256 slots
[ 52.508] 16 512x512 slots
[ 52.508] (==) NV(0): Backing store disabled
[ 52.508] (==) NV(0): Silken mouse enabled
[ 52.508] (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
[ 52.508] (==) NV(0): DPMS enabled
[ 55.081] (--) RandR disabled
[ 55.081] (II) Initializing built-in extension Generic Event Extension
[ 55.081] (II) Initializing built-in extension SHAPE
[ 55.081] (II) Initializing built-in extension MIT-SHM
[ 55.081] (II) Initializing built-in extension XInputExtension
[ 55.081] (II) Initializing built-in extension XTEST
[ 55.081] (II) Initializing built-in extension BIG-REQUESTS
[ 55.081] (II) Initializing built-in extension SYNC
[ 55.081] (II) Initializing built-in extension XKEYBOARD
[ 55.081] (II) Initializing built-in extension XC-MISC
[ 55.081] (II) Initializing built-in extension SECURITY
[ 55.081] (II) Initializing built-in extension XINERAMA
[ 55.081] (II) Initializing built-in extension XFIXES
[ 55.081] (II) Initializing built-in extension RENDER
[ 55.081] (II) Initializing built-in extension RANDR
[ 55.081] (II) Initializing built-in extension COMPOSITE
[ 55.081] (II) Initializing built-in extension DAMAGE
[ 55.103] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
[ 55.132] (II) NV(0): Setting screen physical size to 361 x 203
[ 55.715] (II) config/udev: Adding input device Power Button (/dev/input/event6)
[ 55.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 55.715] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 55.715] (II) LoadModule: "evdev"
[ 55.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 55.725] (II) Module evdev: vendor="X.Org Foundation"
[ 55.725] compiled for 1.12.0, module version = 2.7.0
[ 55.725] Module class: X.Org XInput Driver
[ 55.725] ABI class: X.Org XInput driver, version 16.0
[ 55.725] (II) Using input driver 'evdev' for 'Power Button'
[ 55.725] (**) Power Button: always reports core events
[ 55.725] (**) evdev: Power Button: Device: "/dev/input/event6"
[ 55.725] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 55.725] (--) evdev: Power Button: Found keys
[ 55.725] (II) evdev: Power Button: Configuring as keyboard
[ 55.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
[ 55.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 55.725] (**) Option "xkb_rules" "evdev"
[ 55.725] (**) Option "xkb_model" "evdev"
[ 55.725] (**) Option "xkb_layout" "se"
[ 55.918] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
[ 55.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 55.918] (**) Video Bus: Applying InputClass "Keyboard Defaults"
[ 55.918] (II) Using input driver 'evdev' for 'Video Bus'
[ 55.918] (**) Video Bus: always reports core events
[ 55.918] (**) evdev: Video Bus: Device: "/dev/input/event7"
[ 55.918] (--) evdev: Video Bus: Vendor 0 Product 0x6
[ 55.918] (--) evdev: Video Bus: Found keys
[ 55.918] (II) evdev: Video Bus: Configuring as keyboard
[ 55.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
[ 55.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
[ 55.918] (**) Option "xkb_rules" "evdev"
[ 55.918] (**) Option "xkb_model" "evdev"
[ 55.918] (**) Option "xkb_layout" "se"
[ 55.919] (II) config/udev: Adding input device Power Button (/dev/input/event4)
[ 55.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 55.919] (**) Power Button: Applying InputClass "Keyboard Defaults"
[ 55.919] (II) Using input driver 'evdev' for 'Power Button'
[ 55.919] (**) Power Button: always reports core events
[ 55.919] (**) evdev: Power Button: Device: "/dev/input/event4"
[ 55.919] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 55.919] (--) evdev: Power Button: Found keys
[ 55.919] (II) evdev: Power Button: Configuring as keyboard
[ 55.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
[ 55.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
[ 55.919] (**) Option "xkb_rules" "evdev"
[ 55.919] (**) Option "xkb_model" "evdev"
[ 55.919] (**) Option "xkb_layout" "se"
[ 55.920] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
[ 55.920] (II) No input driver specified, ignoring this device.
[ 55.920] (II) This device may have been added with another device file.
[ 55.921] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
[ 55.921] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
[ 55.921] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
[ 55.921] (II) Using input driver 'evdev' for 'Sleep Button'
[ 55.921] (**) Sleep Button: always reports core events
[ 55.921] (**) evdev: Sleep Button: Device: "/dev/input/event5"
[ 55.921] (--) evdev: Sleep Button: Vendor 0 Product 0x3
[ 55.921] (--) evdev: Sleep Button: Found keys
[ 55.921] (II) evdev: Sleep Button: Configuring as keyboard
[ 55.921] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
[ 55.921] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
[ 55.921] (**) Option "xkb_rules" "evdev"
[ 55.921] (**) Option "xkb_model" "evdev"
[ 55.921] (**) Option "xkb_layout" "se"
[ 55.922] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
[ 55.922] (II) No input driver specified, ignoring this device.
[ 55.922] (II) This device may have been added with another device file.
[ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
[ 55.923] (II) No input driver specified, ignoring this device.
[ 55.923] (II) This device may have been added with another device file.
[ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
[ 55.923] (II) No input driver specified, ignoring this device.
[ 55.923] (II) This device may have been added with another device file.
[ 55.924] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
[ 55.924] (II) No input driver specified, ignoring this device.
[ 55.924] (II) This device may have been added with another device file.
[ 55.924] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
[ 55.924] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
[ 55.924] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 55.924] (**) Logitech USB Receiver: always reports core events
[ 55.924] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
[ 55.925] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 55.925] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
[ 55.925] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 55.925] (--) evdev: Logitech USB Receiver: Found relative axes
[ 55.925] (--) evdev: Logitech USB Receiver: Found x and y relative axes
[ 55.925] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 55.925] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 55.925] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 55.925] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 55.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
[ 55.925] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
[ 55.925] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 55.925] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 55.925] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
[ 55.926] (II) No input driver specified, ignoring this device.
[ 55.926] (II) This device may have been added with another device file.
[ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
[ 55.927] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
[ 55.927] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
[ 55.927] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
[ 55.927] (**) Logitech USB Receiver: always reports core events
[ 55.927] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
[ 55.927] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
[ 55.927] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
[ 55.927] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
[ 55.927] (--) evdev: Logitech USB Receiver: Found relative axes
[ 55.927] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
[ 55.927] (--) evdev: Logitech USB Receiver: Found absolute axes
[ 55.927] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
[ 55.927] (--) evdev: Logitech USB Receiver: Found keys
[ 55.927] (II) evdev: Logitech USB Receiver: Configuring as mouse
[ 55.927] (II) evdev: Logitech USB Receiver: Configuring as keyboard
[ 55.927] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
[ 55.927] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
[ 55.927] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
[ 55.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
[ 55.927] (**) Option "xkb_rules" "evdev"
[ 55.927] (**) Option "xkb_model" "evdev"
[ 55.927] (**) Option "xkb_layout" "se"
[ 55.927] (II) evdev: Logitech USB Receiver: initialized for relative axes.
[ 55.927] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
[ 55.927] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration profile 0
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
[ 55.927] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
[ 55.927] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
[ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
[ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
[ 55.927] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
[ 55.927] (**) USB 2.0 PC Camera: always reports core events
[ 55.927] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
[ 55.927] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
[ 55.927] (--) evdev: USB 2.0 PC Camera: Found keys
[ 55.927] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
[ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
[ 55.927] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
[ 55.927] (**) Option "xkb_rules" "evdev"
[ 55.927] (**) Option "xkb_model" "evdev"
[ 55.927] (**) Option "xkb_layout" "se"
[ 55.928] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
[ 55.928] (II) No input driver specified, ignoring this device.
[ 55.928] (II) This device may have been added with another device file.
[ 55.928] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
[ 55.928] (II) No input driver specified, ignoring this device.
[ 55.928] (II) This device may have been added with another device file.
[ 55.928] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
[ 55.928] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 55.928] (**) AT Translated Set 2 keyboard: always reports core events
[ 55.928] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 55.928] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 55.928] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 55.928] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 55.929] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
[ 55.929] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
[ 55.929] (**) Option "xkb_rules" "evdev"
[ 55.929] (**) Option "xkb_model" "evdev"
[ 55.929] (**) Option "xkb_layout" "se"
[ 55.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
[ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 55.929] (II) LoadModule: "synaptics"
[ 55.929] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 55.967] (II) Module synaptics: vendor="X.Org Foundation"
[ 55.967] compiled for 1.12.1, module version = 1.6.1
[ 55.967] Module class: X.Org XInput Driver
[ 55.967] ABI class: X.Org XInput driver, version 16.0
[ 55.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
[ 55.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 55.967] (**) Option "Device" "/dev/input/event9"
[ 55.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
[ 55.968] (**) Option "TapButton1" "1"
[ 55.968] (**) Option "TapButton2" "2"
[ 55.968] (**) Option "TapButton3" "3"
[ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 55.968] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 55.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
[ 55.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
[ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 55.969] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
[ 55.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
[ 55.969] (II) No input driver specified, ignoring this device.
[ 55.969] (II) This device may have been added with another device file.
[ 55.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
[ 55.970] (II) No input driver specified, ignoring this device.
[ 55.970] (II) This device may have been added with another device file.
From what I can tell it is something with the nvidia driver that doesn't play well with xorg. Perhaps some kind of autodetection that takes long time to finish. Anyone got any ideas how to solve this?
Last edited by Larsson (2012-06-13 18:59:43)Didn't see they where timestamps . Yes it seems that glx is one cause of the delay. I've tried some different xorg.conf, and it's always ligglx.so or NV-GLX that slows it down. Any suggestions on how I can speed this up?
ps. The computer is ok. Although the garddrive is a SATA 3.0Gb/s, 5400 RPM. But I don't think this is the problem? -
[SOLVED] NVIDIA driver conflict after upgrade
First of all, Its nice to be here. I'm a new arch user. So please excuse me if this has been discussed before. I searched the forum , i seem to have this problem https://bbs.archlinux.org/viewtopic.php?id=156666 but the information in the thread did not solve my issue.
When i do an upgrade i get the following message.
:: Starting full system upgrade...
resolving dependencies...
looking for inter-conflicts...
:: libgl and nvidia-304xx-utils are in conflict. Remove nvidia-304xx-utils? [y/N]
If i say yes
error: failed to prepare transaction (could not satisfy dependencies)
:: lib32-nvidia-304xx-utils: requires nvidia-304xx-utils
:: nvidia-304xx: requires nvidia-304xx-utils=304.64
UNAME
[sam@archetype ~]$ uname -a
Linux archetype 3.7.4-1-ARCH #1 SMP PREEMPT Mon Jan 21 23:05:29 CET 2013 x86_64 GNU/Linux
Also, I'm running an Nvidia 7300LE with nvidia-304xx driver. I'm on a x64 system.
Thanks in advance,
Skotadi
Last edited by skotadi (2013-01-27 08:39:02)skotadi wrote:I'm sorry glxinfo isn't working for me even after installing mesa package.
You didn't have mesa before?!
For a newbie what was the reason to omit this part of the Beginners Guide:
Install mesa for 3D support:
# pacman -S mesa
Anyway, glxinfo is inside of a package called mesa-demos (it takes 5 seconds to google it).
Did you removed nouveau as I implied earlier?
Am I getting this right: Arch was working for you since october and something broke in recent days? If so you should have blind idea what could be the reason. Did you changed anything recently? It happened after system upgrade? But first things first: remove nouveau completely (and maybe reinstall nvidia to see what pacman will say about it). Better yet read some of many threads about it. Most notably this one And for christ sake don't use --force switch or I won't be trying to help you anymore.
Last edited by masteryod (2013-01-26 17:55:30) -
[SOLVED] nvidia-settings startup delay
Does anyone happen to know why nvidia-settings takes a good 3-4 minutes to open after open it from the menu or the terminal, sudo or as user? I'm on xfce and didn't have this problem on Cinnamon or Ubuntu Gnome-Shell.
I have to use this settings panel to turn "on" my secondary display when I plug it up also for some reason, this is new too, but I suppose not relevant to the original question. Bonus points if you know why this is too!
Last edited by Somnus (2013-07-29 12:54:00)Actually, chalk this up to not looking hard enough again. The suggestion to add
127.0.0.1 myhostname
to /etc/hosts seems to have solved the issue.
Reference:
https://bbs.archlinux.org/viewtopic.php?id=161837 -
[Solved] Nvidia after kernel update
The nvidia wiki clearly states that: "Every time the kernel26 package is updated, it is a requirement to reinstall the nvidia package and rebooting afterwards. "
But my question is, why? I mean, if the module was to be recompiled, that would make sense. But what does just reinstalling the driver accomplish? In my system, pacman -Ql nvidia shows:
$ pacman -Ql nvidia
nvidia /etc/
nvidia /etc/modprobe.d/
nvidia /etc/modprobe.d/nouveau_blacklist.conf
nvidia /lib/
nvidia /lib/modules/
nvidia /lib/modules/2.6.35-ARCH/
nvidia /lib/modules/2.6.35-ARCH/kernel/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/video/
nvidia /lib/modules/2.6.35-ARCH/kernel/drivers/video/nvidia.ko
From what I've read, I think the kernel update process copies the compiled modules into the proper folder (inside /lib) named by the kernel version. Should this not be the case with nvidia? If it is not, then is this why the reinstall is needed?
Thanks in advance (and my apologies if I've glossed over something that's patently obvious --- while I've searched for the answer before posting, I am still quite the novice at tinkering with the kernel)
EDIT: just after posting I've realized that maybe this post belongs in "Kernel and Hardware Issues" subforum. But the truth is this isn't really an "issue"... it's more a question from, well, a newbie :-)
Last edited by gauthma (2010-09-28 21:53:04)gauthma wrote:
Thank you for the feedback.
ngoonee wrote:Of course, if you're using nvidia-beta or some other AUR nvidia driver, you need to reinstall it.
Running the risk of asking what might be obvious to some, why?
The driver speaks to the kernel. When the kernel updates, the language used might have changed in various ways. Since nvidia is closed-source, its not always obvious whether what has changed affects it. The same applies to xorg-server, when it updates you should recompile your nvidia driver. Its SOMETIMES not needed, but when it is, would you rather be solving it from the tty?
quathma wrote:
ngoonee wrote:That's what the wiki is referring to. Even if the kernel major version has not updated (for example 2.6.35.5 to 2.6.35.6 is only a minor version bump) the driver may need to be recompiled. Safer to just do it everytime and restart the machine.
Now I'm confused. Are you saying that the safest approach is to recompile and (re)install the nvidia module after each kernel update? And does this only apply to modules from beta & AUR, or [extra] as well? And shouldn't all this issue of recompiling modules also apply to every other module installed in the system?
Yes that's the safest approach. [extra] is taken care of by the devs, the simple way is to assume they'll bump it if needed (and you don't need to do anything).
The same thing applies to almost any kernel module (AFAIK). It applies to virtualbox's modules, for sure, as well as phc-intel (the only other 2 external modules I use). Most kernel modules are actually compiled in to the kernel26 package anyway, so its not very many. I just automatically recompile the ones I use whenever I notice a kernel/xorg update. -
[SOLVED] nvidia-settings taking a long time to load.
I just got an nvidia card yesterday, so I'm not sure if this is regular behavior, but nvidia-settings take about 3-5 minutes to load. I'm using KDE. When I try to load it from the terminal I see a bunch of errors like this:
nvidia-settings
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:335: Unable to locate image file in pixmap_path: "Expander/expander-normal-c.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:337: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:344: Unable to locate image file in pixmap_path: "Expander/expander-prelight-c.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:346: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:353: Unable to locate image file in pixmap_path: "Expander/expander-active-c.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:355: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:362: Unable to locate image file in pixmap_path: "Expander/expander-insens-c.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:364: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:372: Unable to locate image file in pixmap_path: "Expander/expander-normal-sc.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:374: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:381: Unable to locate image file in pixmap_path: "Expander/expander-prelight-sc.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:383: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:390: Unable to locate image file in pixmap_path: "Expander/expander-active-sc.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:392: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:409: Unable to locate image file in pixmap_path: "Expander/expander-normal-se.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:411: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:418: Unable to locate image file in pixmap_path: "Expander/expander-prelight-se.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:420: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:427: Unable to locate image file in pixmap_path: "Expander/expander-active-se.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:429: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:446: Unable to locate image file in pixmap_path: "Expander/expander-normal-e.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:448: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:455: Unable to locate image file in pixmap_path: "Expander/expander-prelight-e.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:457: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:464: Unable to locate image file in pixmap_path: "Expander/expander-active-e.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:466: Background image options specified without filename
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:473: Unable to locate image file in pixmap_path: "Expander/expander-insens-e.png"
/home/beelzebud/.themes/qt4/gtk-2.0/gtkrc:475: Background image options specified without filename
I searched around for this issue, and found people who had similar problems with Firefox in the past, but I never see anyone who has solved it. On my setup I don't have this issue with any other app besides nvidia-settings.
Last edited by Beelzebud (2013-05-02 17:13:52)Beelzebud wrote:
Ok today i noticed that if I delete ~/.nvidia-settings-rc, the UI loads instantly just like it's supposed to. I started googling around and found that there is indeed a bug in nvidia-settings which has something to do with the way it handles a machine's hostname.
If I edit ~/.nvidia-settings-rc and delete every line that starts with my hostname, the program loads instantly. When you close nvidia-settings, it will re-write the file, and the next time you start it, you're back to waiting a long time for the UI to load. It seems there is nothing that can be done to truly fix this until nvidia fixes the bug that is causing it.
Thank you! I had this problem since the latest update.
To avoid having to remove/edit the configuration file, I have added a line in /etc/hosts:
127.0.0.1 myhostname -
[Solved] NVidia 340xx Legacy Troubles - Geforce GTX260 card
What I have done so far:
- 340xx legacy driver installed
- Tried downgrading to kernel 3.16.3, and then when that didn't work, back to recent.
When I startx, it seems to attempt to access WM with both monitors, and then falls back to an error:
waiting for X server to shut down (EE) Server terminated successfully (0). Closing log file.
Checking out Xorg.0.log, it expands a little bit on the initial error message:
NVIDIA(GPU-0): Deleting GPU-0
(EE) Server terminated successfully (0). Closing log file.
And kernel log shows an interesting message:
NVRM precedes every line of the following message
Your system is not currently configured to drive a VGA console
on the primary VGA device. The NVIDIA Linux graphics driver
requires the use of a text-mode VGA console. Use of other console
drivers including, but not limited to, vesafb, may result in
corruption and stability problems, and is not supported
Let me know if any more clarification is needed.
Last edited by Neikron (2014-10-08 16:46:58)LeonardK wrote:Had the same. But pls mark the thread as [SOLVED]
It has been marked solved for over a week now. -
[Solved] nvidia-ck-corex: requires nvidia-utils=290.10
Hi all,
I've been using arch time and I am very happy with it, but today when updating the system had a problem I'm not sure you know how to solve.
I have a problem with the nvidia-kernel and nvidia corex ck-utils, this is what appears on the terminal
Error: failed to prepare transaction (could not Satisfy dependencies)
Starting full system upgrade :: ...
:: Nvidia-ck-corex: requires nvidia-utils = 290.10
Does anyone have an idea of how to solve the pronlema?
A greeting.
Last edited by Vladder (2012-02-15 13:37:20)Thanks, I'll wait until I can update the system.
Gusar wrote: Kinda a brilliant example of this, isn't it?
Sorry for my lack of aptitude, I hope to improve in the future. -
[solved] NVIDIA 346.35-3 breaks TTY console displays.
I have a GeForce 970, I am using GRUB with GRUB_GFXPAYLOAD_LINUX=keep, and my kernel is booting into 1920x1200 mode. Since upgrading to NVIDIA 346.35-3 my TTY consoles all become garbled and unreadable once X has started, but they are unaffected before X starts.
Downgrading to NVIDIA 343.36-6 solves this issue. There isn't any output in the journal. When I switch to a TTY, my monitor reports that it's in 640x480 mode.
Example:
Anyone else having these problems?
Last edited by gilmoreja (2015-02-27 12:27:00)Hi,
I also confirm the behavior with 2x GTX 970 SLI + Base Mosaic Mode and Nvidia 346.35-6.
Hope this get fixed soon. Or we find a workaround for that issue. -
[SOLVED] Nvidia and Xorg 1.8: Failed to Increase Resolution
Hi there,
with the new Xorg 1.8 I experienced the following Problem:
When booting my system, the screen is set to 1680x1050 resolution which works fine.
To play some games, I use to change the screen resolution to 1024x768 via xrandr.
But when I try to set the resolution back to anything bigger than 1024x768, both xrandr and nvidia-settings fail.
Output of xrandr:
$ xrandr -s 1680x1050
Failed to change the screen configuration!
$ xrandr --verbose -s 1680x0105
Size 1680x105 not found in available modes
Trying to change the Resolution back to 1680x1050 by nvidia-settings:
Failed to set MetaMode (1) 'DFP-0: 1680x1050 @1680x1050 +0+0' (Mode 1680x1050, id: 63) on X screen 0
Would you like to remove this MetaMode?
Then I try restarting my XServer (to get back the 1680 res), it crashes with following error message:
/var/log/Xorg.0.log
(II) NVIDIA(0): Setting mode "nvidia-auto-select"
(EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
(EE) NVIDIA(0): *** Aborting ***
I got a Nvidia Geforce 7300 Go, latest driver installed (extra/nvidia 256.44-1),
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
xorg.conf
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
Option "Xinerama" "0"
EndSection
# Section "Module"
# Load "dbe"
# Load "extmod"
# Load "type1"
# Load "freetype"
# Load "glx"
# EndSection
# Section "Extensions"
# Option "Composite" "Enable"
# EndSection
Section "ServerFlags"
Option "DontZap" "false"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
Option "XkbOptions" "terminate:ctrl_alt_bksp"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "LPL"
HorizSync 30.0 - 75.0
VertRefresh 60.0
Option "DPMS"
Option "Metamodes" "1680x1050"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
BoardName "GeForce Go 7300"
Option "NoLogo" "true"
Option "Metamodes" "1680x1050"
# Option "RenderAccel" "True"
# Option "AllowGLXWithComposite" "true"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
# Option "AddARGBGLXVisuals" "True"
# Option "TwinView" "0"
# Option "metamodes" "1680x1050 +0+0"
SubSection "Display"
Depth 24
EndSubSection
EndSection
xorg.conf.d/20-nvidia.conf
Section "Device"
Identifier "Default nvidia Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
Any ideas?
Last edited by Pyxir (2010-08-12 08:42:02)Whoops, the 0105 obviously was a typo when reproducing the problem.
The complete Xorg.0.log of my current session, including errors:
[ 21.242]
This is a pre-release version of the X server from The X.Org Foundation.
It is not supported in any way.
Bugs may be filed in the bugzilla at http://bugs.freedesktop.org/.
Select the "xorg" product for bugs you find in this release.
Before reporting bugs in pre-release versions please check the
latest version in the X.Org Foundation git repository.
See http://wiki.x.org/wiki/GitPage for git access instructions.
[ 21.242]
X.Org X Server 1.8.1.902 (1.8.2 RC 2)
Release Date: 2010-06-21
[ 21.242] X Protocol Version 11, Revision 0
[ 21.242] Build Operating System: Linux 2.6.34-ARCH i686
[ 21.242] Current Operating System: Linux arche 2.6.34-ARCH #1 SMP PREEMPT Wed Aug 4 14:27:43 CEST 2010 i686
[ 21.242] Kernel command line: root=/dev/sda2 ro vga=773
[ 21.242] Build Date: 21 June 2010 11:54:27AM
[ 21.242]
[ 21.263] Current version of pixman: 0.18.2
[ 21.263] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 21.263] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 21.263] (==) Log file: "/var/log/Xorg.0.log", Time: Wed Aug 11 21:57:27 2010
[ 21.296] (==) Using config file: "/etc/X11/xorg.conf"
[ 21.296] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 21.345] (==) ServerLayout "Layout0"
[ 21.345] (**) |-->Screen "Screen0" (0)
[ 21.345] (**) | |-->Monitor "Monitor0"
[ 21.345] (**) | |-->Device "Device0"
[ 21.345] (**) |-->Input Device "Keyboard0"
[ 21.345] (**) |-->Input Device "Mouse0"
[ 21.345] (**) Option "DontZap" "false"
[ 21.345] (**) Option "Xinerama" "0"
[ 21.345] (==) Automatically adding devices
[ 21.345] (==) Automatically enabling devices
[ 21.411] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 21.411] Entry deleted from font path.
[ 21.436] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/Type1/,
/usr/share/fonts/100dpi/,
/usr/share/fonts/75dpi/
[ 21.436] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 21.436] (WW) AllowEmptyInput is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 21.436] (WW) Disabling Keyboard0
[ 21.436] (WW) Disabling Mouse0
[ 21.436] (II) Loader magic: 0x81e9d00
[ 21.436] (II) Module ABI versions:
[ 21.436] X.Org ANSI C Emulation: 0.4
[ 21.436] X.Org Video Driver: 7.0
[ 21.436] X.Org XInput driver : 9.0
[ 21.436] X.Org Server Extension : 3.0
[ 21.444] (--) PCI:*(0:1:0:0) 10de:01d7:17aa:3839 nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] rev 161, Mem @ 0xc9000000/16777216, 0xd0000000/268435456, 0xca000000/16777216
[ 21.444] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 21.444] (II) LoadModule: "extmod"
[ 21.528] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 21.538] (II) Module extmod: vendor="X.Org Foundation"
[ 21.538] compiled for 1.8.1.902, module version = 1.0.0
[ 21.538] Module class: X.Org Server Extension
[ 21.538] ABI class: X.Org Server Extension, version 3.0
[ 21.538] (II) Loading extension MIT-SCREEN-SAVER
[ 21.538] (II) Loading extension XFree86-VidModeExtension
[ 21.538] (II) Loading extension XFree86-DGA
[ 21.538] (II) Loading extension DPMS
[ 21.538] (II) Loading extension XVideo
[ 21.538] (II) Loading extension XVideo-MotionCompensation
[ 21.538] (II) Loading extension X-Resource
[ 21.538] (II) LoadModule: "dbe"
[ 21.538] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 21.550] (II) Module dbe: vendor="X.Org Foundation"
[ 21.550] compiled for 1.8.1.902, module version = 1.0.0
[ 21.550] Module class: X.Org Server Extension
[ 21.550] ABI class: X.Org Server Extension, version 3.0
[ 21.550] (II) Loading extension DOUBLE-BUFFER
[ 21.550] (II) LoadModule: "glx"
[ 21.560] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 22.778] (II) Module glx: vendor="NVIDIA Corporation"
[ 22.778] compiled for 4.0.2, module version = 1.0.0
[ 22.778] Module class: X.Org Server Extension
[ 22.788] (II) NVIDIA GLX Module 256.44 Thu Jul 29 01:55:11 PDT 2010
[ 22.788] (II) Loading extension GLX
[ 22.788] (II) LoadModule: "record"
[ 22.789] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 22.794] (II) Module record: vendor="X.Org Foundation"
[ 22.794] compiled for 1.8.1.902, module version = 1.13.0
[ 22.794] Module class: X.Org Server Extension
[ 22.794] ABI class: X.Org Server Extension, version 3.0
[ 22.794] (II) Loading extension RECORD
[ 22.794] (II) LoadModule: "dri"
[ 22.794] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 22.825] (II) Module dri: vendor="X.Org Foundation"
[ 22.825] compiled for 1.8.1.902, module version = 1.0.0
[ 22.825] ABI class: X.Org Server Extension, version 3.0
[ 22.825] (II) Loading extension XFree86-DRI
[ 22.825] (II) LoadModule: "dri2"
[ 22.825] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 22.825] (II) Module dri2: vendor="X.Org Foundation"
[ 22.825] compiled for 1.8.1.902, module version = 1.2.0
[ 22.825] ABI class: X.Org Server Extension, version 3.0
[ 22.825] (II) Loading extension DRI2
[ 22.825] (II) LoadModule: "nvidia"
[ 22.843] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 22.891] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 22.891] compiled for 4.0.2, module version = 1.0.0
[ 22.891] Module class: X.Org Video Driver
[ 22.925] (II) NVIDIA dlloader X Driver 256.44 Thu Jul 29 01:32:42 PDT 2010
[ 22.926] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 22.926] (++) using VT number 7
[ 22.939] (II) Primary Device is: PCI 01@00:00:0
[ 22.967] (II) Loading sub module "fb"
[ 22.967] (II) LoadModule: "fb"
[ 22.967] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 22.981] (II) Module fb: vendor="X.Org Foundation"
[ 22.981] compiled for 1.8.1.902, module version = 1.0.0
[ 22.981] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.981] (II) Loading sub module "wfb"
[ 22.981] (II) LoadModule: "wfb"
[ 22.981] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 22.992] (II) Module wfb: vendor="X.Org Foundation"
[ 22.992] compiled for 1.8.1.902, module version = 1.0.0
[ 22.992] ABI class: X.Org ANSI C Emulation, version 0.4
[ 22.992] (II) Loading sub module "ramdac"
[ 22.992] (II) LoadModule: "ramdac"
[ 22.992] (II) Module "ramdac" already built-in
[ 23.023] (**) NVIDIA(0): Depth 16, (--) framebuffer bpp 16
[ 23.023] (==) NVIDIA(0): RGB weight 565
[ 23.023] (==) NVIDIA(0): Default visual is TrueColor
[ 23.023] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 23.023] (**) NVIDIA(0): Enabling RENDER acceleration
[ 23.023] (II) NVIDIA(0): Support for GLX with the Damage and Composite X extensions is
[ 23.023] (II) NVIDIA(0): enabled.
[ 24.045] (II) NVIDIA(0): NVIDIA GPU GeForce Go 7300 (G72) at PCI:1:0:0 (GPU-0)
[ 24.045] (--) NVIDIA(0): Memory: 524288 kBytes
[ 24.045] (--) NVIDIA(0): VideoBIOS: 05.72.22.54.18
[ 24.045] (II) NVIDIA(0): Detected PCI Express Link width: 16X
[ 24.045] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 24.045] (--) NVIDIA(0): Connected display device(s) on GeForce Go 7300 at PCI:1:0:0:
[ 24.045] (--) NVIDIA(0): LPL (DFP-0)
[ 24.045] (--) NVIDIA(0): LPL (DFP-0): 330.0 MHz maximum pixel clock
[ 24.045] (--) NVIDIA(0): LPL (DFP-0): Internal Dual Link LVDS
[ 24.074] (II) NVIDIA(0): Assigned Display Device: DFP-0
[ 24.074] (WW) NVIDIA(0): No valid modes for "1024x768_75.00"; removing.
[ 24.074] (WW) NVIDIA(0):
[ 24.074] (WW) NVIDIA(0): Unable to validate any modes; falling back to the default mode
[ 24.074] (WW) NVIDIA(0): "nvidia-auto-select".
[ 24.074] (WW) NVIDIA(0):
[ 24.074] (II) NVIDIA(0): Validated modes:
[ 24.074] (II) NVIDIA(0): "nvidia-auto-select"
[ 24.074] (II) NVIDIA(0): Virtual screen size determined to be 1680 x 1050
[ 24.074] (--) NVIDIA(0): DPI set to (129, 126); computed from "UseEdidDpi" X config
[ 24.074] (--) NVIDIA(0): option
[ 24.074] (==) NVIDIA(0): Disabling 32-bit ARGB GLX visuals.
[ 24.076] (II) NVIDIA(0): Initialized GPU GART.
[ 24.081] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 24.082] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 24.082] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 24.082] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 24.082] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 24.082] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 24.082] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 24.082] (II) NVIDIA(0): Config Options in the README.
[ 24.082] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[ 24.082] (II) NVIDIA(0): enough to receive ACPI hotkey events.
[ 24.082] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[ 24.082] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 25.488] (II) Loading extension NV-GLX
[ 25.508] (II) NVIDIA(0): Initialized OpenGL Acceleration
[ 25.524] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 25.524] (II) NVIDIA(0): Initialized X Rendering Acceleration
[ 25.548] (==) NVIDIA(0): Backing store disabled
[ 25.548] (==) NVIDIA(0): Silken mouse enabled
[ 25.560] (==) NVIDIA(0): DPMS enabled
[ 25.560] (II) Loading extension NV-CONTROL
[ 25.560] (II) Loading extension XINERAMA
[ 25.560] (II) Loading sub module "dri2"
[ 25.560] (II) LoadModule: "dri2"
[ 25.560] (II) Reloading /usr/lib/xorg/modules/extensions/libdri2.so
[ 25.560] (II) NVIDIA(0): [DRI2] Setup complete
[ 25.560] (==) RandR enabled
[ 25.561] (II) Initializing built-in extension Generic Event Extension
[ 25.561] (II) Initializing built-in extension SHAPE
[ 25.561] (II) Initializing built-in extension MIT-SHM
[ 25.561] (II) Initializing built-in extension XInputExtension
[ 25.561] (II) Initializing built-in extension XTEST
[ 25.561] (II) Initializing built-in extension BIG-REQUESTS
[ 25.561] (II) Initializing built-in extension SYNC
[ 25.561] (II) Initializing built-in extension XKEYBOARD
[ 25.561] (II) Initializing built-in extension XC-MISC
[ 25.561] (II) Initializing built-in extension SECURITY
[ 25.561] (II) Initializing built-in extension XINERAMA
[ 25.561] (II) Initializing built-in extension XFIXES
[ 25.561] (II) Initializing built-in extension RENDER
[ 25.561] (II) Initializing built-in extension RANDR
[ 25.561] (II) Initializing built-in extension COMPOSITE
[ 25.561] (II) Initializing built-in extension DAMAGE
[ 25.564] (II) Initializing extension GLX
[ 26.195] (II) config/udev: Adding input device Power Button (/dev/input/event3)
[ 26.195] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.195] (**) Power Button: Applying InputClass "keyboard"
[ 26.195] (II) LoadModule: "evdev"
[ 26.195] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 26.221] (II) Module evdev: vendor="X.Org Foundation"
[ 26.221] compiled for 1.8.0, module version = 2.4.0
[ 26.221] Module class: X.Org XInput Driver
[ 26.221] ABI class: X.Org XInput driver, version 9.0
[ 26.221] (**) Power Button: always reports core events
[ 26.221] (**) Power Button: Device: "/dev/input/event3"
[ 26.230] (II) Power Button: Found keys
[ 26.230] (II) Power Button: Configuring as keyboard
[ 26.231] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 26.231] (**) Option "xkb_rules" "evdev"
[ 26.231] (**) Option "xkb_model" "evdev"
[ 26.231] (**) Option "xkb_layout" "de"
[ 26.231] (**) Option "xkb_variant" "nodeadkeys"
[ 26.296] (II) config/udev: Adding input device Video Bus (/dev/input/event4)
[ 26.296] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
[ 26.297] (**) Video Bus: Applying InputClass "keyboard"
[ 26.297] (**) Video Bus: always reports core events
[ 26.297] (**) Video Bus: Device: "/dev/input/event4"
[ 26.304] (II) Video Bus: Found keys
[ 26.304] (II) Video Bus: Configuring as keyboard
[ 26.304] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD)
[ 26.304] (**) Option "xkb_rules" "evdev"
[ 26.304] (**) Option "xkb_model" "evdev"
[ 26.304] (**) Option "xkb_layout" "de"
[ 26.304] (**) Option "xkb_variant" "nodeadkeys"
[ 26.306] (II) config/udev: Adding input device Power Button (/dev/input/event2)
[ 26.306] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 26.306] (**) Power Button: Applying InputClass "keyboard"
[ 26.306] (**) Power Button: always reports core events
[ 26.306] (**) Power Button: Device: "/dev/input/event2"
[ 26.314] (II) Power Button: Found keys
[ 26.314] (II) Power Button: Configuring as keyboard
[ 26.314] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD)
[ 26.314] (**) Option "xkb_rules" "evdev"
[ 26.314] (**) Option "xkb_model" "evdev"
[ 26.314] (**) Option "xkb_layout" "de"
[ 26.314] (**) Option "xkb_variant" "nodeadkeys"
[ 26.314] (II) config/udev: Adding input device Lid Switch (/dev/input/event1)
[ 26.314] (II) No input driver/identifier specified (ignoring)
[ 26.315] (II) config/udev: Adding input device USB 2.0 Camera (/dev/input/event7)
[ 26.315] (**) USB 2.0 Camera: Applying InputClass "evdev keyboard catchall"
[ 26.315] (**) USB 2.0 Camera: Applying InputClass "keyboard"
[ 26.315] (**) USB 2.0 Camera: always reports core events
[ 26.316] (**) USB 2.0 Camera: Device: "/dev/input/event7"
[ 26.324] (II) USB 2.0 Camera: Found keys
[ 26.324] (II) USB 2.0 Camera: Configuring as keyboard
[ 26.324] (II) XINPUT: Adding extended input device "USB 2.0 Camera" (type: KEYBOARD)
[ 26.324] (**) Option "xkb_rules" "evdev"
[ 26.324] (**) Option "xkb_model" "evdev"
[ 26.324] (**) Option "xkb_layout" "de"
[ 26.324] (**) Option "xkb_variant" "nodeadkeys"
[ 26.324] (II) config/udev: Adding input device HDA Digital PCBeep (/dev/input/event8)
[ 26.325] (II) No input driver/identifier specified (ignoring)
[ 26.328] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
[ 26.328] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 26.328] (**) AT Translated Set 2 keyboard: Applying InputClass "keyboard"
[ 26.328] (**) AT Translated Set 2 keyboard: always reports core events
[ 26.328] (**) AT Translated Set 2 keyboard: Device: "/dev/input/event0"
[ 26.340] (II) AT Translated Set 2 keyboard: Found keys
[ 26.340] (II) AT Translated Set 2 keyboard: Configuring as keyboard
[ 26.340] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD)
[ 26.341] (**) Option "xkb_rules" "evdev"
[ 26.341] (**) Option "xkb_model" "evdev"
[ 26.341] (**) Option "xkb_layout" "de"
[ 26.341] (**) Option "xkb_variant" "nodeadkeys"
[ 26.341] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event6)
[ 26.341] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
[ 26.341] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 26.341] (II) LoadModule: "synaptics"
[ 26.341] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
[ 26.362] (II) Module synaptics: vendor="X.Org Foundation"
[ 26.362] compiled for 1.8.0.902, module version = 1.2.2
[ 26.362] Module class: X.Org XInput Driver
[ 26.362] ABI class: X.Org XInput driver, version 9.0
[ 26.362] (II) Synaptics touchpad driver version 1.2.2
[ 26.362] (**) Option "Device" "/dev/input/event6"
[ 26.394] (II) SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5472
[ 26.394] (II) SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4448
[ 26.394] (II) SynPS/2 Synaptics TouchPad: pressure range 0 - 255
[ 26.394] (II) SynPS/2 Synaptics TouchPad: finger width range 0 - 0
[ 26.394] (II) SynPS/2 Synaptics TouchPad: buttons: left right double triple
[ 26.394] (**) Option "VertEdgeScroll" "on"
[ 26.394] (**) Option "TapButton1" "1"
[ 26.394] (**) Option "TapButton2" "2"
[ 26.394] (**) Option "TapButton3" "3"
[ 26.421] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 26.421] (**) SynPS/2 Synaptics TouchPad: always reports core events
[ 26.434] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD)
[ 26.434] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
[ 26.434] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 0
[ 26.434] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
[ 26.434] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
[ 26.460] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 26.461] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse0)
[ 26.461] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
[ 26.461] (II) Synaptics touchpad driver version 1.2.2
[ 26.867] SynPS/2 Synaptics TouchPad no synaptics event device found
[ 26.867] (**) Option "Device" "/dev/input/mouse0"
[ 26.880] (**) Option "VertEdgeScroll" "on"
[ 26.881] (**) Option "TapButton1" "1"
[ 26.881] (**) Option "TapButton2" "2"
[ 26.881] (**) Option "TapButton3" "3"
[ 26.901] Query no Synaptics: 6003C8
[ 26.901] (--) SynPS/2 Synaptics TouchPad: no supported touchpad found
[ 26.901] (EE) SynPS/2 Synaptics TouchPad Unable to query/initialize Synaptics hardware.
[ 26.934] (EE) PreInit failed for input device "SynPS/2 Synaptics TouchPad"
[ 26.934] (II) UnloadModule: "synaptics"
[ 26.934] (II) config/udev: Adding input device PC Speaker (/dev/input/event5)
[ 26.934] (II) No input driver/identifier specified (ignoring)
[ 201.065] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 202.424] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 202.424] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 202.424] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 202.424] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 202.424] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 202.424] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 202.424] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 202.424] (II) NVIDIA(0): Config Options in the README.
[ 202.425] (II) NVIDIA(0): ACPI display change hotkey events enabled: the X server is new
[ 202.425] (II) NVIDIA(0): enough to receive ACPI hotkey events.
[ 202.425] (II) NVIDIA(0): ACPI brightness change hotkey events enabled.
[ 202.540] (--) SynPS/2 Synaptics TouchPad: touchpad found
[ 241.790] (II) config/udev: Adding input device PS/2+USB Mouse (/dev/input/mouse1)
[ 241.790] (II) No input driver/identifier specified (ignoring)
[ 241.795] (II) config/udev: Adding input device PS/2+USB Mouse (/dev/input/event9)
[ 241.795] (**) PS/2+USB Mouse: Applying InputClass "evdev pointer catchall"
[ 241.795] (**) PS/2+USB Mouse: always reports core events
[ 241.795] (**) PS/2+USB Mouse: Device: "/dev/input/event9"
[ 241.804] (II) PS/2+USB Mouse: Found 3 mouse buttons
[ 241.804] (II) PS/2+USB Mouse: Found scroll wheel(s)
[ 241.804] (II) PS/2+USB Mouse: Found relative axes
[ 241.804] (II) PS/2+USB Mouse: Found x and y relative axes
[ 241.804] (II) PS/2+USB Mouse: Configuring as mouse
[ 241.804] (**) PS/2+USB Mouse: YAxisMapping: buttons 4 and 5
[ 241.804] (**) PS/2+USB Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 241.804] (II) XINPUT: Adding extended input device "PS/2+USB Mouse" (type: MOUSE)
[ 241.804] (**) PS/2+USB Mouse: (accel) keeping acceleration scheme 1
[ 241.804] (**) PS/2+USB Mouse: (accel) acceleration profile 0
[ 241.804] (**) PS/2+USB Mouse: (accel) acceleration factor: 2.000
[ 241.804] (**) PS/2+USB Mouse: (accel) acceleration threshold: 4
[ 241.804] (II) PS/2+USB Mouse: initialized for relative axes.
[ 1596.383] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
[ 1601.611] (II) NVIDIA(0): Setting mode "1024x768"
[ 1604.865] (EE) NVIDIA(0): Failed to allocate primary buffer: out of memory.
[ 1604.865] (EE) NVIDIA(0): *** Aborting ***
[ 1604.870] (II) NVIDIA(0): Setting mode "1024x768" -
[SOLVED] NVidia GT240 HDMI Audio and ALSA
I have an NVidia GT240 video card with HDMI out and I cannot for the life of me get the audio working through it!
I've installed the drivers for NVidia (I've managed to load up XBMC and the video works beautifully) but when loading ALSA (aplay -l) there are no devices listed! I've disabled my onboard audio outputs just to avoid conflicts, aplay -l used to output my onboard realtek devices.
I'm not sure why the devices aren't listed anywhere, either in "aplay -l" or "aplay -L".
I'm looking to see if there's a config file somewhere where I would need to declare the device or something? The device shows up as an HD Audio Controller in lspci.
Last edited by nerditup (2010-06-14 19:20:59)Hey Nerditup,
I managed to get my card working. Here is the thread http://bbs.archlinux.org/viewtopic.php?id=90350. Mine is the last post. Basically I had to manually build the Alsa-driver package which contains the kernel modules. No patches need or anything. I just downloaded the latest package from the Alsa site and extracted it, did a cofigure, make, make install and followed the rest of the steps posted at the start of the thread(the sound.conf file) and it worked. It would not work at all with the stock Arch package.
Hope that helps and ask if you need some more help...
Kevin -
[FIXED BUT NOT SOLVED] NVIDIA - Desktop shifted left off the screen...
Hello Community!
For a pretty long time right now, I am trying to fix the video setup of my HTPC but without success. Because I'am run out of ideas, I really need Your help.
PROBLEM:
The desktop is shifted left off the screen, round about 100 Pixel.
It started some time in the past, while upgrading a one year old Ubuntu installation (NVDIA drivers). Because I couldn't fix it and also wanted to replace Ubuntu with ArchLinux, I performed a clean ArchLinux installation.
First I used the nouveau drivers ending up with the same problem. I read an configured using xrandr and cvt, but with no success.
So I restored the system to a snapshot taken before X11 and nouveau drivers installations, thank's BTRFS, and installed the proprietary NVIDIA drivers ending up with the same problems. Again I tried all the tips and tricks found in the documentations and forums, used nvidia-xconfig, hand crafted the xorg.conf all with no success.
HARDWARE
The system is a MSI Media Live (http://www.msi.com/product/desktop/Media-Live.html)
. Support AMDR Athlon 64 X2, Athlon 64 and Sempron in the Socket AM2 package
. North Bridge: nVidia® C51PVG Chipset
. South Bridge: nVidia® MCP51 Chipset
. Graphics is Integrated NVIDIA GPU GeForce 6150 LE
. VGA, SCART and HDMI - Connectors
The display Problem is on VGA and HDMI now, where in the past the VGA was perfect. Therefor I connected and used the VGA port only, in all tests.
INSTALLATION HISTORY
2012-12-30 + Installation according ArchLinux install guide
2012-12-31 + pacman -S openssh
systemctl start sshd
2012-12-31 + pacman -S btrfs-progs
2012-12-31 pacman -S sudo
2012-12-31 + sudo pacman -S bash-completion
2013-01-03 + pacman -S rsync wget gptfdisk
2013-01-10 + pacman -Suy nvidia-304xx
2013-01-10 + pacman -Syu nvidia-304xx-utils
2013-01-10 + pacman -S xorg-server xorg-xinit xorg-server-utils
2013-01-10 + pacman -S mesa
2013-01-10 + pacman -S xorg-twm xorg-xclock xterm
2013-01-10 + pacman -S ttf-dejavu
2013-01-10 + pacman -Suy lxdm
2013-01-10 + systemctl enable lxdm.service
2013-01-10 + pacman -S xorg-xdpyinfo
2013-01-10 + pacman -S pkgtools
2013-01-10 + pacman -S pkgfile
2013-01-10 + pacman -S bc
As You can see, I installed only a minimal X11 environment for test. The lxdm display manger shows up but with very small font and shifted to the left. Only if I force a resolution of 1024x768 the image is centered on screen/tv but still the very small font. Obviously not a solution for a HTPC.
Here are the xorg.conf and the Xorg.0.log of my last test configuration.
xorg.xonf
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 304.64 (buildmeister@swio-display-x86-rhel47-12) Tue Oct 30 12:04:46 PDT 2012
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 100 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection
Section "Files"
EndSection
Section "InputDevice"
# generated from default
Identifier "Mouse0"
Driver "mouse"
Option "Protocol" "auto"
Option "Device" "/dev/psaux"
Option "Emulate3Buttons" "no"
Option "ZAxisMapping" "4 5"
EndSection
Section "InputDevice"
# generated from default
Identifier "Keyboard0"
Driver "kbd"
EndSection
Section "Monitor"
Identifier "Monitor0"
VendorName "Unknown"
ModelName "Unknown"
HorizSync 28.0 - 33.0
VertRefresh 43.0 - 72.0
Option "DPMS"
EndSection
Section "Device"
Identifier "Device0"
Driver "nvidia"
VendorName "NVIDIA Corporation"
EndSection
Section "Screen"
Identifier "Screen0"
Device "Device0"
Monitor "Monitor0"
DefaultDepth 24
SubSection "Display"
Depth 24
EndSubSection
EndSection
In the Section "ServerLayout" I modified the line
Screen 0 "Screen0" 100 0
by adding the 100 0 at the end.
Xorg.0.log
[ 12.997]
X.Org X Server 1.13.1
Release Date: 2012-12-13
[ 12.997] X Protocol Version 11, Revision 0
[ 12.997] Build Operating System: Linux 3.7.0-1-ARCH x86_64
[ 12.997] Current Operating System: Linux media-pc 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 08:57:15 CET 2012 x86_64
[ 12.997] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=0f1f870d-ccaa-4bc2-b149-1792f0c69fce
[ 12.997] Build Date: 16 December 2012 04:45:14PM
[ 12.997]
[ 12.997] Current version of pixman: 0.28.2
[ 12.997] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 12.997] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 12.998] (==) Log file: "/var/log/Xorg.0.log", Time: Fri Jan 18 13:18:12 2013
[ 13.065] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.065] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 13.066] (==) ServerLayout "Layout0"
[ 13.066] (**) |-->Screen "Screen0" (0)
[ 13.066] (**) | |-->Monitor "Monitor0"
[ 13.066] (**) | |-->Device "Device0"
[ 13.066] (**) |-->Input Device "Keyboard0"
[ 13.066] (**) |-->Input Device "Mouse0"
[ 13.066] (==) Automatically adding devices
[ 13.066] (==) Automatically enabling devices
[ 13.066] (==) Automatically adding GPU devices
[ 13.213] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
[ 13.213] Entry deleted from font path.
[ 13.213] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
[ 13.213] Entry deleted from font path.
[ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 13.222] Entry deleted from font path.
[ 13.222] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 13.222] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 13.223] Entry deleted from font path.
[ 13.223] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 13.223] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/
[ 13.223] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 13.223] (WW) Hotplugging is on, devices using drivers 'kbd', 'mouse' or 'vmmouse' will be disabled.
[ 13.223] (WW) Disabling Keyboard0
[ 13.223] (WW) Disabling Mouse0
[ 13.223] (II) Loader magic: 0x7fcc40
[ 13.223] (II) Module ABI versions:
[ 13.223] X.Org ANSI C Emulation: 0.4
[ 13.223] X.Org Video Driver: 13.1
[ 13.223] X.Org XInput driver : 18.0
[ 13.223] X.Org Server Extension : 7.0
[ 13.226] (--) PCI:*(0:0:5:0) 10de:0241:1462:3290 rev 162, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfc000000/16777216, BIOS @ 0x????????/131072
[ 13.226] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
[ 13.226] Initializing built-in extension Generic Event Extension
[ 13.226] Initializing built-in extension SHAPE
[ 13.226] Initializing built-in extension MIT-SHM
[ 13.226] Initializing built-in extension XInputExtension
[ 13.227] Initializing built-in extension XTEST
[ 13.227] Initializing built-in extension BIG-REQUESTS
[ 13.227] Initializing built-in extension SYNC
[ 13.227] Initializing built-in extension XKEYBOARD
[ 13.227] Initializing built-in extension XC-MISC
[ 13.227] Initializing built-in extension SECURITY
[ 13.227] Initializing built-in extension XINERAMA
[ 13.227] Initializing built-in extension XFIXES
[ 13.227] Initializing built-in extension RENDER
[ 13.227] Initializing built-in extension RANDR
[ 13.227] Initializing built-in extension COMPOSITE
[ 13.227] Initializing built-in extension DAMAGE
[ 13.227] Initializing built-in extension MIT-SCREEN-SAVER
[ 13.227] Initializing built-in extension DOUBLE-BUFFER
[ 13.227] Initializing built-in extension RECORD
[ 13.227] Initializing built-in extension DPMS
[ 13.227] Initializing built-in extension X-Resource
[ 13.227] Initializing built-in extension XVideo
[ 13.227] Initializing built-in extension XVideo-MotionCompensation
[ 13.227] Initializing built-in extension XFree86-VidModeExtension
[ 13.227] Initializing built-in extension XFree86-DGA
[ 13.227] Initializing built-in extension XFree86-DRI
[ 13.227] Initializing built-in extension DRI2
[ 13.227] (II) LoadModule: "glx"
[ 13.414] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 15.559] (II) Module glx: vendor="NVIDIA Corporation"
[ 15.559] compiled for 4.0.2, module version = 1.0.0
[ 15.559] Module class: X.Org Server Extension
[ 15.559] (II) NVIDIA GLX Module 304.64 Tue Oct 30 11:18:32 PDT 2012
[ 15.560] Loading extension GLX
[ 15.560] (II) LoadModule: "nvidia"
[ 15.560] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 15.868] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 15.868] compiled for 4.0.2, module version = 1.0.0
[ 15.868] Module class: X.Org Video Driver
[ 15.868] (II) NVIDIA dlloader X Driver 304.64 Tue Oct 30 10:59:51 PDT 2012
[ 15.868] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 15.868] (++) using VT number 7
[ 15.875] (II) Loading sub module "fb"
[ 15.875] (II) LoadModule: "fb"
[ 15.984] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 16.008] (II) Module fb: vendor="X.Org Foundation"
[ 16.008] compiled for 1.13.1, module version = 1.0.0
[ 16.008] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.008] (II) Loading sub module "wfb"
[ 16.008] (II) LoadModule: "wfb"
[ 16.008] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 16.025] (II) Module wfb: vendor="X.Org Foundation"
[ 16.025] compiled for 1.13.1, module version = 1.0.0
[ 16.025] ABI class: X.Org ANSI C Emulation, version 0.4
[ 16.025] (II) Loading sub module "ramdac"
[ 16.025] (II) LoadModule: "ramdac"
[ 16.025] (II) Module "ramdac" already built-in
[ 16.025] (**) NVIDIA(0): Depth 24, (--) framebuffer bpp 32
[ 16.025] (==) NVIDIA(0): RGB weight 888
[ 16.025] (==) NVIDIA(0): Default visual is TrueColor
[ 16.025] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 16.026] (**) NVIDIA(0): Enabling 2D acceleration
[ 19.582] (II) NVIDIA(GPU-0): Display (Acer AT3220 (CRT-0)) does not support NVIDIA 3D
[ 19.582] (II) NVIDIA(GPU-0): Vision stereo.
[ 19.584] (II) NVIDIA(0): NVIDIA GPU GeForce 6150 LE (C51) at PCI:0:5:0 (GPU-0)
[ 19.584] (--) NVIDIA(0): Memory: 262144 kBytes
[ 19.584] (--) NVIDIA(0): VideoBIOS: 05.51.28.56.19
[ 19.584] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
[ 19.584] (--) NVIDIA(0): Valid display device(s) on GeForce 6150 LE at PCI:0:5:0
[ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0) (connected)
[ 19.584] (--) NVIDIA(0): TV-0
[ 19.584] (--) NVIDIA(0): DFP-0
[ 19.584] (--) NVIDIA(0): Acer AT3220 (CRT-0): 350.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): TV encoder: (null)
[ 19.585] (--) NVIDIA(0): DFP-0: 310.0 MHz maximum pixel clock
[ 19.585] (--) NVIDIA(0): DFP-0: Internal Single Link TMDS
[ 19.585] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
[ 19.585] (**) NVIDIA(0): device Acer AT3220 (CRT-0) (Using EDID frequencies has
[ 19.585] (**) NVIDIA(0): been enabled on all display devices.)
[ 19.585] (==) NVIDIA(0):
[ 19.585] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
[ 19.585] (==) NVIDIA(0): will be used as the requested mode.
[ 19.585] (==) NVIDIA(0):
[ 19.585] (II) NVIDIA(0): Validated MetaModes:
[ 19.585] (II) NVIDIA(0): "CRT-0:nvidia-auto-select"
[ 19.585] (II) NVIDIA(0): Virtual screen size determined to be 1360 x 768
[ 19.587] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 19.588] (WW) NVIDIA(0): Unable to support custom viewPortOut 1360 x 765 +0 +1
[ 19.589] (--) NVIDIA(0): DPI set to (49, 48); computed from "UseEdidDpi" X config
[ 19.589] (--) NVIDIA(0): option
[ 19.589] (--) Depth 24 pixmap format is 32 bpp
[ 19.599] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
[ 19.599] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
[ 19.599] (II) NVIDIA(0): configuration option may not be set correctly. When the
[ 19.599] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
[ 19.599] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
[ 19.599] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
[ 19.599] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
[ 19.599] (II) NVIDIA(0): Config Options in the README.
[ 19.599] (II) NVIDIA(0): Setting mode "CRT-0:nvidia-auto-select"
[ 19.754] Loading extension NV-GLX
[ 19.797] (==) NVIDIA(0): Disabling shared memory pixmaps
[ 19.797] (==) NVIDIA(0): Backing store disabled
[ 19.797] (==) NVIDIA(0): Silken mouse enabled
[ 19.798] (**) NVIDIA(0): DPMS enabled
[ 19.798] Loading extension NV-CONTROL
[ 19.799] Loading extension XINERAMA
[ 19.799] (II) Loading sub module "dri2"
[ 19.799] (II) LoadModule: "dri2"
[ 19.799] (II) Module "dri2" already built-in
[ 19.799] (II) NVIDIA(0): [DRI2] Setup complete
[ 19.799] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
[ 19.799] (--) RandR disabled
[ 19.817] (II) Initializing extension GLX
[ 20.522] (II) config/udev: Adding input device Power Button (/dev/input/event3)
only removed the input detection stuff
Question
How can I shift the display to the right?
Many thanks for any hints.
rale
Last edited by rale (2013-01-19 11:46:14)Mr.Elendig wrote:Switch to dvi/hdmi if you can. Else you have to play with screen calibration etc.
Thank You Mr.Elendig!
The simplest answer often is best. After I connected a TFT display, instead of my TV, I was able to calibrate the screen output and got the desktop shifted. Knowing that, I tried the settings of my TV again. There is a hard to find option for calibration wich is set to automatic but doesn't do it. Trying to turn it of did the trick. Even the option stays on automatic and even the display format is fixed to 4:3 instead of 16:9, finaly the TV adjusted the display correctly.
None the less, the problem not to be able to shift the desktop using the screen paramters in xorg.conf remains.
Thanks
rale -
[SOLVED] nvidia, missing openGL extensions
I am trying to get steam to work properly. Some games run but their performance sucks. Others complain about missing extensions and never start. I have gtx 770 and nvidia driver installed so this should not be the case.
What I have installed
$ pacman -Qs nvidia
local/libcl 1.1-4
OpenCL library and ICD loader from NVIDIA
local/libvdpau 1.1-1
Nvidia VDPAU library
local/nvidia 346.59-1
NVIDIA drivers for linux
local/nvidia-utils 346.59-1
NVIDIA drivers utilities
$ pacman -Qs mesa
local/glu 9.0.0-3
Mesa OpenGL Utility library
local/lib32-libtxc_dxtn 1.0.1-5
S3 Texture Compression (S3TC) library for Mesa (32-bit)
local/lib32-mesa 10.5.3-1
an open-source implementation of the OpenGL specification (32-bit)
local/lib32-mesa-libgl 10.5.3-1
Mesa 3-D graphics library (32-bit)
local/libtxc_dxtn 1.0.1-6
S3 Texture Compression (S3TC) library for Mesa
local/mesa 10.5.3-1
an open-source implementation of the OpenGL specification
local/mesa-demos 8.2.0-4
Mesa demos and tools
local/mesa-libgl 10.5.3-1
Mesa 3-D graphics library
All new processors have integrated graphics so I checked which one is used.
$ lspci
00:00.0 Host bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor DRAM Controller (rev 09)
00:01.0 PCI bridge: Intel Corporation Xeon E3-1200 v2/3rd Gen Core processor PCI Express Root Port (rev 09)
00:14.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB xHCI Host Controller (rev 04)
00:16.0 Communication controller: Intel Corporation 7 Series/C210 Series Chipset Family MEI Controller #1 (rev 04)
00:1a.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #2 (rev 04)
00:1b.0 Audio device: Intel Corporation 7 Series/C210 Series Chipset Family High Definition Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 1 (rev c4)
00:1c.4 PCI bridge: Intel Corporation 7 Series/C210 Series Chipset Family PCI Express Root Port 5 (rev c4)
00:1c.5 PCI bridge: Intel Corporation 82801 PCI Bridge (rev c4)
00:1d.0 USB controller: Intel Corporation 7 Series/C210 Series Chipset Family USB Enhanced Host Controller #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation Z77 Express Chipset LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 7 Series/C210 Series Chipset Family 6-port SATA Controller [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 7 Series/C210 Series Chipset Family SMBus Controller (rev 04)
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 770] (rev a1)
01:00.1 Audio device: NVIDIA Corporation GK104 HDMI Audio Controller (rev a1)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168/8411 PCI Express Gigabit Ethernet Controller (rev 06)
04:00.0 PCI bridge: ASMedia Technology Inc. ASM1083/1085 PCIe to PCI Bridge (rev 03)
nvidia driver was properly loaded in X and I can see in `lspci -k`
01:00.0 VGA compatible controller: NVIDIA Corporation GK104 [GeForce GTX 770] (rev a1)
Subsystem: ASUSTeK Computer Inc. Device 8465
Kernel driver in use: nvidia
Kernel modules: nouveau, nvidia
I have installed unigine-heaven to get some reliable information about my card's performance. Unfortunately, when I start the benchmark I get
$ unigine-heaven
Loading "/opt/unigine-heaven/bin/../data/heaven_4.0.cfg"...
Loading "libGPUMonitor_x64.so"...
Loading "libGL.so.1"...
Loading "libopenal.so.1"...
Set 1920x1080 fullscreen video mode
Set 1.00 gamma value
Unigine engine http://unigine.com/
Binary: Linux 64bit GCC 4.4.5 Release Feb 13 2013 r11274
Features: OpenGL OpenAL XPad360 Joystick Flash Editor
App path: /opt/unigine-heaven/bin/
Data path: /opt/unigine-heaven/data/
Save path: /home/lorddidger/.Heaven/
---- System ----
System: Linux 3.19.3-3-ARCH x86_64
CPU: Intel(R) Core(TM) i7-3770 CPU @ 3.40GHz 3410MHz MMX SSE SSE2 SSE3 SSSE3 SSE41 SSE42 AVX HTT x8
GPU: GeForce GTX 770 PCI Express 346.59 x1
System memory: 3904 MB
Video memory: 2048 MB
Sync threads: 7
Async threads: 8
---- MathLib ----
Set SSE2 simd processor
---- Sound ----
Renderer: OpenAL Soft
OpenAL vendor: OpenAL Community
OpenAL renderer: OpenAL Soft
OpenAL version: 1.1 ALSOFT 1.16.0
Found AL_EXT_LINEAR_DISTANCE
Found AL_EXT_OFFSET
Found ALC_EXT_EFX
Found EFX Filter
Found EFX Reverb
Found EAX Reverb
Found QUAD16 format
Found 51CHN16 format
Found 61CHN16 format
Found 71CHN16 format
Maximum sources: 256
Maximum effect slots: 4
Maximum auxiliary sends: 2
---- Render ----
Renderer: NVIDIA NV70 (Kepler) 2048MB
OpenGL vendor: VMware, Inc.
OpenGL renderer: Gallium 0.4 on llvmpipe (LLVM 3.6, 256 bits)
OpenGL version: 3.0 Mesa 10.5.3
Found required GL_ARB_map_buffer_range
Found required GL_ARB_vertex_array_object
Found required GL_ARB_draw_instanced
Found required GL_ARB_draw_elements_base_vertex
Found required GL_ARB_transform_feedback
Found required GL_ARB_half_float_vertex
Found required GL_ARB_half_float_pixel
Found required GL_ARB_framebuffer_object
Found required GL_ARB_texture_multisample
Found required GL_ARB_uniform_buffer_object
Unigine fatal error
GLRender::require_extension(): required extension GL_ARB_geometry_shader4 is not supported
Shutdown
I do not know what else should I investigate. I tried lib32-nvidia-libgl instead of mesa's but steam did not even start then.
Any hint would be greatly appreciated.
Last edited by crazySocket (2015-04-25 12:10:13)I believe I saw in steam logs
libGL error: unable to load driver: swrast_dri.so
libGL error: failed to load driver: swrast
but I can see it no longer. It must be that I have this library installed.
$ find / -mount -name '*swrast*'
/usr/lib/xorg/modules/dri/kms_swrast_dri.so
/usr/lib/xorg/modules/dri/swrast_dri.so
/usr/lib32/xorg/modules/dri/kms_swrast_dri.so
/usr/lib32/xorg/modules/dri/swrast_dri.so
You can get it too by installing proper packages
$ pacman -Qo /usr/lib/xorg/modules/dri/swrast_dri.so
/usr/lib/xorg/modules/dri/swrast_dri.so belongs to mesa 10.5.3-1
$ pacman -Qo /usr/lib32/xorg/modules/dri/swrast_dri.so
/usr/lib32/xorg/modules/dri/swrast_dri.so belongs to lib32-mesa 10.5.3-1
I do not know why your steam tries to load nouveau. Perhaps you have not installed the packages I mentioned in my previous post. nvidia blacklists nouveau. Make sure you have exactly the same state I have described and u will get steam, at least, starting up. -
I installed Xorg and the proprietary nvidia driver using the wiki, but when running xinit or startx I get errors such as no nvidia.ko, unable to connect to X server, and Nos such process server error
Rebooted and works fine
Last edited by duke11235 (2010-08-23 00:36:15)New Progress!
I've managed to get my screen to go black during the server's run, instead of having my TTY just freeze!
I followed the instructions here
However, now I have the problem that the X server shuts down about two seconds after startup. I have confirmed that both of the xrandr commands are completed.
Here is my x log
Here is my x output
As you can see, we have "Screen 1 deleted because of no matching config section". I have no idea what that means.
The NVIDIA driver still appears to try setting mode "NULL" (maybe it isn't getting the available modes properly?)
At the end, there's this weird thing...
reporting 3 4 17 122
have a master to look out for
adjust shatters 0 1366
need to create shared pixmap 1(II) NVIDIA(GPU-0): Deleting GPU-0
Uhhh...why is it deleting my GPU? (I have no idea what it means by that)
UPDATE (again!)...
I HAVE LWM WINDOWS APPEARING! (but I had to stop the nvidia to get that)
I changed the ServerLayout to have Screen 0 be the "intel" screen.
Initially, input wasn't being handled at all, resulting in complete inability to do anything once x started
I managed to get input working by adding some xorg configs for my input devices (now I have fully-functional xorg, but without my nvidia card)
I still want to get my nvidia working.
Last edited by soccermiles (2013-12-22 19:31:50)
Maybe you are looking for
-
NEW iPod Touch has an error message
I got a new iPod touch just over two weeks ago. I'd had one previously so I just connected the new one as per the instruction booklet. Within half an hour iTunes popped up to tell me to update. So I did. BIG MISTAKE. The iPod crashed, I tried to rest
-
Trying to install Adobe Photodeluxe (elements 13) I have box and cd sleeve with serial number, But registration won't let me type letters only numbers allowed. Help please.
-
hey im new to java and im workin on linux .I just worked on helloworld programme and could compile it but cannot run im logged in with my login in linux with my username & password but i always get this command HelloWorldApp.java: cannot execute
-
Java.util.Date and java.sql.Date
when i am trying to displaying date in my jsp page errors occurs saying that java.util.date and java.sql.date are matching.. i have some sql statements which i need to execute in the page.so i cant delete that import sql statement. so what is the sol
-
Regarding Sales Reports MC+Q and MCSI
Dear all, I want to know about sales report MC+Q and MCSI, What data are coming into following columns of these reports : 1. Sales 2. Net Inv. Sales 1 3. Net Inv. Sales 2 Than